ARM: shmobile: sh73a0: Support sparse GPIO numbers
The SH73A0 SoC has sparse GPIO numbers. Declare the pin numbers ranges
in the PFC SoC data and use the pin numbers in the GPIO API.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 8ff53a1..a4ac46a 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -304,9 +304,9 @@
if (brightness == 0) {
/* Reset the chip */
- gpio_set_value(GPIO_PORT235, 0);
+ gpio_set_value(235, 0);
mdelay(24);
- gpio_set_value(GPIO_PORT235, 1);
+ gpio_set_value(235, 1);
return 0;
}
@@ -406,7 +406,7 @@
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .cd_gpio = GPIO_PORT251,
+ .cd_gpio = 251,
};
static struct resource sdhi0_resources[] = {
@@ -461,7 +461,7 @@
static struct fixed_voltage_config cn4_power_info = {
.supply_name = "CN4 SD/MMC Vdd",
.microvolts = 3300000,
- .gpio = GPIO_PORT114,
+ .gpio = 114,
.enable_high = 1,
.init_data = &cn4_power_init_data,
};
@@ -479,10 +479,10 @@
static int power_gpio = -EINVAL;
if (power_gpio < 0) {
- int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
+ int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
"sdhi1_power");
if (!ret)
- power_gpio = GPIO_PORT114;
+ power_gpio = 114;
}
/*
@@ -493,7 +493,7 @@
* regulator driver. We have to live with the race in case the driver
* gets unloaded and the GPIO freed between these two steps.
*/
- gpio_set_value(GPIO_PORT114, state);
+ gpio_set_value(114, state);
}
static struct sh_mobile_sdhi_info sh_sdhi1_info = {
@@ -603,11 +603,11 @@
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
- gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
+ gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* enable SMSC911X */
- gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
- gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
+ gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
+ gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* FSI A */
gpio_request(GPIO_FN_FSIACK, NULL);
@@ -622,13 +622,13 @@
gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
/* LCD panel */
- gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
+ gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
mdelay(1);
- gpio_set_value(GPIO_PORT217, 1);
+ gpio_set_value(217, 1);
mdelay(100);
/* LCD backlight controller */
- gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
+ gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
lcd_backlight_set_brightness(0);
/* enable SDHI0 on CN15 [SD I/F] */