ARM: shmobile: sh73a0: Support sparse GPIO numbers
The SH73A0 SoC has sparse GPIO numbers. Declare the pin numbers ranges
in the PFC SoC data and use the pin numbers in the GPIO API.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 2ccc860..b6f0515 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -135,17 +135,17 @@
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
- GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */
- GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */
- GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */
- GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */
- GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */
- GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */
- GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */
- GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */
- /* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */
- GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */
- /* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */
+ GPIO_KEY(KEY_VOLUMEUP, 56, "+"), /* S2: VOL+ [IRQ9] */
+ GPIO_KEY(KEY_VOLUMEDOWN, 54, "-"), /* S3: VOL- [IRQ10] */
+ GPIO_KEY(KEY_MENU, 27, "Menu"), /* S4: MENU [IRQ30] */
+ GPIO_KEY(KEY_HOMEPAGE, 26, "Home"), /* S5: HOME [IRQ31] */
+ GPIO_KEY(KEY_BACK, 11, "Back"), /* S6: BACK [IRQ0] */
+ GPIO_KEY(KEY_PHONE, 238, "Tel"), /* S7: TEL [IRQ11] */
+ GPIO_KEY(KEY_POWER, 239, "C1"), /* S8: CAM [IRQ13] */
+ GPIO_KEY(KEY_MAIL, 224, "Mail"), /* S9: MAIL [IRQ3] */
+ /* Omitted button "C3?": 223 - S10: CUST [IRQ8] */
+ GPIO_KEY(KEY_CAMERA, 164, "C2"), /* S11: CAM_HALF [IRQ25] */
+ /* Omitted button "?": 152 - S12: CAM_FULL [No IRQ] */
};
static struct gpio_keys_platform_data gpio_key_info = {
@@ -165,9 +165,9 @@
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
- GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
- GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
- GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
+ GPIO_LED("G", 20), /* PORT20 [GPO0] -> LED7 -> "G" */
+ GPIO_LED("H", 21), /* PORT21 [GPO1] -> LED8 -> "H" */
+ GPIO_LED("J", 22), /* PORT22 [GPO2] -> LED9 -> "J" */
};
static struct gpio_led_platform_data gpio_leds_info = {
@@ -187,7 +187,7 @@
static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
.name = "V2513",
.pin_gpio_fn = GPIO_FN_TPU1TO2,
- .pin_gpio = GPIO_PORT153,
+ .pin_gpio = 153,
.channel_offset = 0x90,
.timer_bit = 2,
.max_brightness = 1000,
@@ -215,7 +215,7 @@
static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
.name = "V2514",
.pin_gpio_fn = GPIO_FN_TPU4TO1,
- .pin_gpio = GPIO_PORT199,
+ .pin_gpio = 199,
.channel_offset = 0x50,
.timer_bit = 1,
.max_brightness = 1000,
@@ -243,7 +243,7 @@
static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
.name = "V2515",
.pin_gpio_fn = GPIO_FN_TPU2TO1,
- .pin_gpio = GPIO_PORT197,
+ .pin_gpio = 197,
.channel_offset = 0x50,
.timer_bit = 1,
.max_brightness = 1000,
@@ -271,7 +271,7 @@
static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
.name = "KEYLED",
.pin_gpio_fn = GPIO_FN_TPU3TO0,
- .pin_gpio = GPIO_PORT163,
+ .pin_gpio = 163,
.channel_offset = 0x10,
.timer_bit = 0,
.max_brightness = 1000,
@@ -474,8 +474,8 @@
gpio_request(GPIO_FN_D15_NAF15, NULL);
gpio_request(GPIO_FN_CS5A_, NULL);
gpio_request(GPIO_FN_WE0__FWE, NULL);
- gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
- gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
+ gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
+ gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* KEYSC */
gpio_request(GPIO_FN_KEYIN0_PU, NULL);
@@ -507,7 +507,7 @@
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
- gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
+ gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* SDHI0 (microSD) */
gpio_request(GPIO_FN_SDHICD0_PU, NULL);