pc8736x_gpio: add support for PC87365 chips
This is only compile tested, because I do not own appropriate hardware.
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/pc8736x_gpio.c b/drivers/char/pc8736x_gpio.c
index b930de5..3f7da8c 100644
--- a/drivers/char/pc8736x_gpio.c
+++ b/drivers/char/pc8736x_gpio.c
@@ -41,7 +41,8 @@
#define SIO_BASE2 0x4E /* alt command-reg to check */
#define SIO_SID 0x20 /* SuperI/O ID Register */
-#define SIO_SID_VALUE 0xe9 /* Expected value in SuperI/O ID Register */
+#define SIO_SID_PC87365 0xe5 /* Expected value in ID Register for PC87365 */
+#define SIO_SID_PC87366 0xe9 /* Expected value in ID Register for PC87366 */
#define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
@@ -91,13 +92,17 @@
static int pc8736x_superio_present(void)
{
+ int id;
+
/* try the 2 possible values, read a hardware reg to verify */
superio_cmd = SIO_BASE1;
- if (superio_inb(SIO_SID) == SIO_SID_VALUE)
+ id = superio_inb(SIO_SID);
+ if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)
return superio_cmd;
superio_cmd = SIO_BASE2;
- if (superio_inb(SIO_SID) == SIO_SID_VALUE)
+ id = superio_inb(SIO_SID);
+ if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)
return superio_cmd;
return 0;