iwlagn: generic bt coex functions
Move bt coex functions to iwl-agn-lib.c, so those functions
can be shared by multiple wifi/bt combo devices
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index ea24240..a9e69a6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1542,3 +1542,373 @@
ieee80211_wake_queues(priv->hw);
mutex_unlock(&priv->mutex);
}
+
+/*
+ * BT coex
+ */
+/*
+ * Macros to access the lookup table.
+ *
+ * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
+* wifi_prio, wifi_txrx and wifi_sh_ant_req.
+ *
+ * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
+ *
+ * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
+ * one after another in 32-bit registers, and "registers" 0 through 7 contain
+ * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
+ *
+ * These macros encode that format.
+ */
+#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
+ wifi_txrx, wifi_sh_ant_req) \
+ (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
+ (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
+
+#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
+ lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
+#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
+ bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
+ wifi_sh_ant_req))))
+#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
+ bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
+ wifi_sh_ant_req))
+#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, \
+ wifi_sh_ant_req) \
+ LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
+ bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
+ wifi_sh_ant_req))
+
+#define LUT_WLAN_KILL_OP(lut, op, val) \
+ lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
+#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
+#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+
+#define LUT_ANT_SWITCH_OP(lut, op, val) \
+ lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
+#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, \
+ wifi_sh_ant_req))))
+#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+
+static const __le32 iwlagn_def_3w_lookup[12] = {
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaeaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xcc00ff28),
+ cpu_to_le32(0x0000aaaa),
+ cpu_to_le32(0xcc00aaaa),
+ cpu_to_le32(0x0000aaaa),
+ cpu_to_le32(0xc0004000),
+ cpu_to_le32(0x00004000),
+ cpu_to_le32(0xf0005000),
+ cpu_to_le32(0xf0004000),
+};
+
+static const __le32 iwlagn_concurrent_lookup[12] = {
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0x00000000),
+ cpu_to_le32(0x00000000),
+ cpu_to_le32(0x00000000),
+ cpu_to_le32(0x00000000),
+};
+
+void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
+{
+ struct iwlagn_bt_cmd bt_cmd = {
+ .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT,
+ .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT,
+ .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT,
+ .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT,
+ };
+
+ BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) !=
+ sizeof(bt_cmd.bt3_lookup_table));
+
+ bt_cmd.prio_boost = priv->cfg->bt_prio_boost;
+ bt_cmd.kill_ack_mask = priv->kill_ack_mask;
+ bt_cmd.kill_cts_mask = priv->kill_cts_mask;
+ bt_cmd.valid = priv->bt_valid;
+
+ /*
+ * Configure BT coex mode to "no coexistence" when the
+ * user disabled BT coexistence, we have no interface
+ * (might be in monitor mode), or the interface is in
+ * IBSS mode (no proper uCode support for coex then).
+ */
+ if (!bt_coex_active || priv->iw_mode == NL80211_IFTYPE_ADHOC) {
+ bt_cmd.flags = 0;
+ } else {
+ bt_cmd.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
+ IWLAGN_BT_FLAG_COEX_MODE_SHIFT;
+ if (priv->bt_ch_announce)
+ bt_cmd.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
+ IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", bt_cmd.flags);
+ }
+ if (priv->bt_full_concurrent)
+ memcpy(bt_cmd.bt3_lookup_table, iwlagn_concurrent_lookup,
+ sizeof(iwlagn_concurrent_lookup));
+ else
+ memcpy(bt_cmd.bt3_lookup_table, iwlagn_def_3w_lookup,
+ sizeof(iwlagn_def_3w_lookup));
+
+ IWL_DEBUG_INFO(priv, "BT coex %s in %s mode\n",
+ bt_cmd.flags ? "active" : "disabled",
+ priv->bt_full_concurrent ?
+ "full concurrency" : "3-wire");
+
+ if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
+ IWL_ERR(priv, "failed to send BT Coex Config\n");
+
+ /*
+ * When we are doing a restart, need to also reconfigure BT
+ * SCO to the device. If not doing a restart, bt_sco_active
+ * will always be false, so there's no need to have an extra
+ * variable to check for it.
+ */
+ if (priv->bt_sco_active) {
+ struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
+
+ if (priv->bt_sco_active)
+ sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
+ if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_SCO,
+ sizeof(sco_cmd), &sco_cmd))
+ IWL_ERR(priv, "failed to send BT SCO command\n");
+ }
+}
+
+static void iwlagn_bt_traffic_change_work(struct work_struct *work)
+{
+ struct iwl_priv *priv =
+ container_of(work, struct iwl_priv, bt_traffic_change_work);
+ int smps_request = -1;
+
+ IWL_DEBUG_INFO(priv, "BT traffic load changes: %d\n",
+ priv->bt_traffic_load);
+
+ switch (priv->bt_traffic_load) {
+ case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
+ smps_request = IEEE80211_SMPS_AUTOMATIC;
+ break;
+ case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
+ smps_request = IEEE80211_SMPS_DYNAMIC;
+ break;
+ case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
+ case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
+ smps_request = IEEE80211_SMPS_STATIC;
+ break;
+ default:
+ IWL_ERR(priv, "Invalid BT traffic load: %d\n",
+ priv->bt_traffic_load);
+ break;
+ }
+
+ mutex_lock(&priv->mutex);
+
+ if (priv->cfg->ops->lib->update_chain_flags)
+ priv->cfg->ops->lib->update_chain_flags(priv);
+
+ if (smps_request != -1 &&
+ priv->vif && priv->vif->type == NL80211_IFTYPE_STATION)
+ ieee80211_request_smps(priv->vif, smps_request);
+
+ mutex_unlock(&priv->mutex);
+}
+
+static void iwlagn_print_uartmsg(struct iwl_priv *priv,
+ struct iwl_bt_uart_msg *uart_msg)
+{
+ IWL_DEBUG_NOTIF(priv, "Message Type = 0x%X, SSN = 0x%X, "
+ "Update Req = 0x%X",
+ (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >>
+ BT_UART_MSG_FRAME1MSGTYPE_POS,
+ (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >>
+ BT_UART_MSG_FRAME1SSN_POS,
+ (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >>
+ BT_UART_MSG_FRAME1UPDATEREQ_POS);
+
+ IWL_DEBUG_NOTIF(priv, "Open connections = 0x%X, Traffic load = 0x%X, "
+ "Chl_SeqN = 0x%X, In band = 0x%X",
+ (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >>
+ BT_UART_MSG_FRAME2OPENCONNECTIONS_POS,
+ (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >>
+ BT_UART_MSG_FRAME2TRAFFICLOAD_POS,
+ (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >>
+ BT_UART_MSG_FRAME2CHLSEQN_POS,
+ (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >>
+ BT_UART_MSG_FRAME2INBAND_POS);
+
+ IWL_DEBUG_NOTIF(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
+ "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X",
+ (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3SCOESCO_POS,
+ (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3SNIFF_POS,
+ (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3A2DP_POS,
+ (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3ACL_POS,
+ (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3MASTER_POS,
+ (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >>
+ BT_UART_MSG_FRAME3OBEX_POS);
+
+ IWL_DEBUG_NOTIF(priv, "Idle duration = 0x%X",
+ (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >>
+ BT_UART_MSG_FRAME4IDLEDURATION_POS);
+
+ IWL_DEBUG_NOTIF(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
+ "eSCO Retransmissions = 0x%X",
+ (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >>
+ BT_UART_MSG_FRAME5TXACTIVITY_POS,
+ (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >>
+ BT_UART_MSG_FRAME5RXACTIVITY_POS,
+ (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >>
+ BT_UART_MSG_FRAME5ESCORETRANSMIT_POS);
+
+ IWL_DEBUG_NOTIF(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X",
+ (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >>
+ BT_UART_MSG_FRAME6SNIFFINTERVAL_POS,
+ (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
+ BT_UART_MSG_FRAME6DISCOVERABLE_POS);
+
+ IWL_DEBUG_NOTIF(priv, "Sniff Activity = 0x%X, Inquiry/Page SR Mode = "
+ "0x%X, Connectable = 0x%X",
+ (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
+ BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
+ (BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_MSK & uart_msg->frame7) >>
+ BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_POS,
+ (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >>
+ BT_UART_MSG_FRAME7CONNECTABLE_POS);
+}
+
+static void iwlagn_set_kill_ack_msk(struct iwl_priv *priv,
+ struct iwl_bt_uart_msg *uart_msg)
+{
+ u8 kill_ack_msk;
+ __le32 bt_kill_ack_msg[2] = {
+ cpu_to_le32(0xFFFFFFF), cpu_to_le32(0xFFFFFC00) };
+
+ kill_ack_msk = (((BT_UART_MSG_FRAME3A2DP_MSK |
+ BT_UART_MSG_FRAME3SNIFF_MSK |
+ BT_UART_MSG_FRAME3SCOESCO_MSK) &
+ uart_msg->frame3) == 0) ? 1 : 0;
+ if (priv->kill_ack_mask != bt_kill_ack_msg[kill_ack_msk]) {
+ priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
+ priv->kill_ack_mask = bt_kill_ack_msg[kill_ack_msk];
+ /* schedule to send runtime bt_config */
+ queue_work(priv->workqueue, &priv->bt_runtime_config);
+ }
+
+}
+
+void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ unsigned long flags;
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
+ struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
+ struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
+ u8 last_traffic_load;
+
+ IWL_DEBUG_NOTIF(priv, "BT Coex notification:\n");
+ IWL_DEBUG_NOTIF(priv, " status: %d\n", coex->bt_status);
+ IWL_DEBUG_NOTIF(priv, " traffic load: %d\n", coex->bt_traffic_load);
+ IWL_DEBUG_NOTIF(priv, " CI compliance: %d\n",
+ coex->bt_ci_compliance);
+ iwlagn_print_uartmsg(priv, uart_msg);
+
+ last_traffic_load = priv->notif_bt_traffic_load;
+ priv->notif_bt_traffic_load = coex->bt_traffic_load;
+ if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+ if (priv->bt_status != coex->bt_status ||
+ last_traffic_load != coex->bt_traffic_load) {
+ if (coex->bt_status) {
+ /* BT on */
+ if (!priv->bt_ch_announce)
+ priv->bt_traffic_load =
+ IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+ else
+ priv->bt_traffic_load =
+ coex->bt_traffic_load;
+ } else {
+ /* BT off */
+ priv->bt_traffic_load =
+ IWL_BT_COEX_TRAFFIC_LOAD_NONE;
+ }
+ priv->bt_status = coex->bt_status;
+ queue_work(priv->workqueue,
+ &priv->bt_traffic_change_work);
+ }
+ if (priv->bt_sco_active !=
+ (uart_msg->frame3 & BT_UART_MSG_FRAME3SCOESCO_MSK)) {
+ priv->bt_sco_active = uart_msg->frame3 &
+ BT_UART_MSG_FRAME3SCOESCO_MSK;
+ if (priv->bt_sco_active)
+ sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
+ iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO,
+ sizeof(sco_cmd), &sco_cmd, NULL);
+ }
+ }
+
+ iwlagn_set_kill_ack_msk(priv, uart_msg);
+
+ /* FIXME: based on notification, adjust the prio_boost */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->bt_ci_compliance = coex->bt_ci_compliance;
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv)
+{
+ iwlagn_rx_handler_setup(priv);
+ priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] =
+ iwlagn_bt_coex_profile_notif;
+}
+
+void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv)
+{
+ iwlagn_setup_deferred_work(priv);
+
+ INIT_WORK(&priv->bt_traffic_change_work,
+ iwlagn_bt_traffic_change_work);
+}
+
+void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv)
+{
+ cancel_work_sync(&priv->bt_traffic_change_work);
+}