|  | /* | 
|  | *	sc520_freq.c: cpufreq driver for the AMD Elan sc520 | 
|  | * | 
|  | *	Copyright (C) 2005 Sean Young <sean@mess.org> | 
|  | * | 
|  | *	This program is free software; you can redistribute it and/or | 
|  | *	modify it under the terms of the GNU General Public License | 
|  | *	as published by the Free Software Foundation; either version | 
|  | *	2 of the License, or (at your option) any later version. | 
|  | * | 
|  | *	Based on elanfreq.c | 
|  | * | 
|  | *	2005-03-30: - initial revision | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/cpufreq.h> | 
|  | #include <linux/timex.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #include <asm/msr.h> | 
|  |  | 
|  | #define MMCR_BASE	0xfffef000	/* The default base address */ | 
|  | #define OFFS_CPUCTL	0x2   /* CPU Control Register */ | 
|  |  | 
|  | static __u8 __iomem *cpuctl; | 
|  |  | 
|  | #define PFX "sc520_freq: " | 
|  |  | 
|  | static struct cpufreq_frequency_table sc520_freq_table[] = { | 
|  | {0x01,	100000}, | 
|  | {0x02,	133000}, | 
|  | {0,	CPUFREQ_TABLE_END}, | 
|  | }; | 
|  |  | 
|  | static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) | 
|  | { | 
|  | u8 clockspeed_reg = *cpuctl; | 
|  |  | 
|  | switch (clockspeed_reg & 0x03) { | 
|  | default: | 
|  | printk(KERN_ERR PFX "error: cpuctl register has unexpected " | 
|  | "value %02x\n", clockspeed_reg); | 
|  | case 0x01: | 
|  | return 100000; | 
|  | case 0x02: | 
|  | return 133000; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void sc520_freq_set_cpu_state(unsigned int state) | 
|  | { | 
|  |  | 
|  | struct cpufreq_freqs	freqs; | 
|  | u8 clockspeed_reg; | 
|  |  | 
|  | freqs.old = sc520_freq_get_cpu_frequency(0); | 
|  | freqs.new = sc520_freq_table[state].frequency; | 
|  | freqs.cpu = 0; /* AMD Elan is UP */ | 
|  |  | 
|  | cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); | 
|  |  | 
|  | pr_debug("attempting to set frequency to %i kHz\n", | 
|  | sc520_freq_table[state].frequency); | 
|  |  | 
|  | local_irq_disable(); | 
|  |  | 
|  | clockspeed_reg = *cpuctl & ~0x03; | 
|  | *cpuctl = clockspeed_reg | sc520_freq_table[state].index; | 
|  |  | 
|  | local_irq_enable(); | 
|  |  | 
|  | cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); | 
|  | }; | 
|  |  | 
|  | static int sc520_freq_verify(struct cpufreq_policy *policy) | 
|  | { | 
|  | return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); | 
|  | } | 
|  |  | 
|  | static int sc520_freq_target(struct cpufreq_policy *policy, | 
|  | unsigned int target_freq, | 
|  | unsigned int relation) | 
|  | { | 
|  | unsigned int newstate = 0; | 
|  |  | 
|  | if (cpufreq_frequency_table_target(policy, sc520_freq_table, | 
|  | target_freq, relation, &newstate)) | 
|  | return -EINVAL; | 
|  |  | 
|  | sc520_freq_set_cpu_state(newstate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *	Module init and exit code | 
|  | */ | 
|  |  | 
|  | static int sc520_freq_cpu_init(struct cpufreq_policy *policy) | 
|  | { | 
|  | struct cpuinfo_x86 *c = &cpu_data(0); | 
|  | int result; | 
|  |  | 
|  | /* capability check */ | 
|  | if (c->x86_vendor != X86_VENDOR_AMD || | 
|  | c->x86 != 4 || c->x86_model != 9) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* cpuinfo and default policy values */ | 
|  | policy->cpuinfo.transition_latency = 1000000; /* 1ms */ | 
|  | policy->cur = sc520_freq_get_cpu_frequency(0); | 
|  |  | 
|  | result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) | 
|  | { | 
|  | cpufreq_frequency_table_put_attr(policy->cpu); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct freq_attr *sc520_freq_attr[] = { | 
|  | &cpufreq_freq_attr_scaling_available_freqs, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct cpufreq_driver sc520_freq_driver = { | 
|  | .get	= sc520_freq_get_cpu_frequency, | 
|  | .verify	= sc520_freq_verify, | 
|  | .target	= sc520_freq_target, | 
|  | .init	= sc520_freq_cpu_init, | 
|  | .exit	= sc520_freq_cpu_exit, | 
|  | .name	= "sc520_freq", | 
|  | .owner	= THIS_MODULE, | 
|  | .attr	= sc520_freq_attr, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int __init sc520_freq_init(void) | 
|  | { | 
|  | struct cpuinfo_x86 *c = &cpu_data(0); | 
|  | int err; | 
|  |  | 
|  | /* Test if we have the right hardware */ | 
|  | if (c->x86_vendor != X86_VENDOR_AMD || | 
|  | c->x86 != 4 || c->x86_model != 9) { | 
|  | pr_debug("no Elan SC520 processor found!\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); | 
|  | if (!cpuctl) { | 
|  | printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | err = cpufreq_register_driver(&sc520_freq_driver); | 
|  | if (err) | 
|  | iounmap(cpuctl); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __exit sc520_freq_exit(void) | 
|  | { | 
|  | cpufreq_unregister_driver(&sc520_freq_driver); | 
|  | iounmap(cpuctl); | 
|  | } | 
|  |  | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Sean Young <sean@mess.org>"); | 
|  | MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); | 
|  |  | 
|  | module_init(sc520_freq_init); | 
|  | module_exit(sc520_freq_exit); | 
|  |  |