|  | /* | 
|  | *  GPIO interface for IT8761E Super I/O chip | 
|  | * | 
|  | *  Author: Denis Turischev <denis@compulab.co.il> | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License 2 as published | 
|  | *  by the Free Software Foundation. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; see the file COPYING.  If not, write to | 
|  | *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ioport.h> | 
|  |  | 
|  | #include <linux/gpio.h> | 
|  |  | 
|  | #define SIO_CHIP_ID		0x8761 | 
|  | #define CHIP_ID_HIGH_BYTE	0x20 | 
|  | #define CHIP_ID_LOW_BYTE	0x21 | 
|  |  | 
|  | static u8 ports[2] = { 0x2e, 0x4e }; | 
|  | static u8 port; | 
|  |  | 
|  | static DEFINE_SPINLOCK(sio_lock); | 
|  |  | 
|  | #define GPIO_NAME		"it8761-gpio" | 
|  | #define GPIO_BA_HIGH_BYTE	0x60 | 
|  | #define GPIO_BA_LOW_BYTE	0x61 | 
|  | #define GPIO_IOSIZE		4 | 
|  | #define GPIO1X_IO		0xf0 | 
|  | #define GPIO2X_IO		0xf1 | 
|  |  | 
|  | static u16 gpio_ba; | 
|  |  | 
|  | static u8 read_reg(u8 addr, u8 port) | 
|  | { | 
|  | outb(addr, port); | 
|  | return inb(port + 1); | 
|  | } | 
|  |  | 
|  | static void write_reg(u8 data, u8 addr, u8 port) | 
|  | { | 
|  | outb(addr, port); | 
|  | outb(data, port + 1); | 
|  | } | 
|  |  | 
|  | static void enter_conf_mode(u8 port) | 
|  | { | 
|  | outb(0x87, port); | 
|  | outb(0x61, port); | 
|  | outb(0x55, port); | 
|  | outb((port == 0x2e) ? 0x55 : 0xaa, port); | 
|  | } | 
|  |  | 
|  | static void exit_conf_mode(u8 port) | 
|  | { | 
|  | outb(0x2, port); | 
|  | outb(0x2, port + 1); | 
|  | } | 
|  |  | 
|  | static void enter_gpio_mode(u8 port) | 
|  | { | 
|  | write_reg(0x2, 0x7, port); | 
|  | } | 
|  |  | 
|  | static int it8761e_gpio_get(struct gpio_chip *gc, unsigned gpio_num) | 
|  | { | 
|  | u16 reg; | 
|  | u8 bit; | 
|  |  | 
|  | bit = gpio_num % 8; | 
|  | reg = (gpio_num >= 8) ? gpio_ba + 1 : gpio_ba; | 
|  |  | 
|  | return !!(inb(reg) & (1 << bit)); | 
|  | } | 
|  |  | 
|  | static int it8761e_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num) | 
|  | { | 
|  | u8 curr_dirs; | 
|  | u8 io_reg, bit; | 
|  |  | 
|  | bit = gpio_num % 8; | 
|  | io_reg = (gpio_num >= 8) ? GPIO2X_IO : GPIO1X_IO; | 
|  |  | 
|  | spin_lock(&sio_lock); | 
|  |  | 
|  | enter_conf_mode(port); | 
|  | enter_gpio_mode(port); | 
|  |  | 
|  | curr_dirs = read_reg(io_reg, port); | 
|  |  | 
|  | if (curr_dirs & (1 << bit)) | 
|  | write_reg(curr_dirs & ~(1 << bit), io_reg, port); | 
|  |  | 
|  | exit_conf_mode(port); | 
|  |  | 
|  | spin_unlock(&sio_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void it8761e_gpio_set(struct gpio_chip *gc, | 
|  | unsigned gpio_num, int val) | 
|  | { | 
|  | u8 curr_vals, bit; | 
|  | u16 reg; | 
|  |  | 
|  | bit = gpio_num % 8; | 
|  | reg = (gpio_num >= 8) ? gpio_ba + 1 : gpio_ba; | 
|  |  | 
|  | spin_lock(&sio_lock); | 
|  |  | 
|  | curr_vals = inb(reg); | 
|  | if (val) | 
|  | outb(curr_vals | (1 << bit) , reg); | 
|  | else | 
|  | outb(curr_vals & ~(1 << bit), reg); | 
|  |  | 
|  | spin_unlock(&sio_lock); | 
|  | } | 
|  |  | 
|  | static int it8761e_gpio_direction_out(struct gpio_chip *gc, | 
|  | unsigned gpio_num, int val) | 
|  | { | 
|  | u8 curr_dirs, io_reg, bit; | 
|  |  | 
|  | bit = gpio_num % 8; | 
|  | io_reg = (gpio_num >= 8) ? GPIO2X_IO : GPIO1X_IO; | 
|  |  | 
|  | it8761e_gpio_set(gc, gpio_num, val); | 
|  |  | 
|  | spin_lock(&sio_lock); | 
|  |  | 
|  | enter_conf_mode(port); | 
|  | enter_gpio_mode(port); | 
|  |  | 
|  | curr_dirs = read_reg(io_reg, port); | 
|  |  | 
|  | if (!(curr_dirs & (1 << bit))) | 
|  | write_reg(curr_dirs | (1 << bit), io_reg, port); | 
|  |  | 
|  | exit_conf_mode(port); | 
|  |  | 
|  | spin_unlock(&sio_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct gpio_chip it8761e_gpio_chip = { | 
|  | .label			= GPIO_NAME, | 
|  | .owner			= THIS_MODULE, | 
|  | .get			= it8761e_gpio_get, | 
|  | .direction_input	= it8761e_gpio_direction_in, | 
|  | .set			= it8761e_gpio_set, | 
|  | .direction_output	= it8761e_gpio_direction_out, | 
|  | }; | 
|  |  | 
|  | static int __init it8761e_gpio_init(void) | 
|  | { | 
|  | int i, id, err; | 
|  |  | 
|  | /* chip and port detection */ | 
|  | for (i = 0; i < ARRAY_SIZE(ports); i++) { | 
|  | spin_lock(&sio_lock); | 
|  | enter_conf_mode(ports[i]); | 
|  |  | 
|  | id = (read_reg(CHIP_ID_HIGH_BYTE, ports[i]) << 8) + | 
|  | read_reg(CHIP_ID_LOW_BYTE, ports[i]); | 
|  |  | 
|  | exit_conf_mode(ports[i]); | 
|  | spin_unlock(&sio_lock); | 
|  |  | 
|  | if (id == SIO_CHIP_ID) { | 
|  | port = ports[i]; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!port) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* fetch GPIO base address */ | 
|  | enter_conf_mode(port); | 
|  | enter_gpio_mode(port); | 
|  | gpio_ba = (read_reg(GPIO_BA_HIGH_BYTE, port) << 8) + | 
|  | read_reg(GPIO_BA_LOW_BYTE, port); | 
|  | exit_conf_mode(port); | 
|  |  | 
|  | if (!request_region(gpio_ba, GPIO_IOSIZE, GPIO_NAME)) | 
|  | return -EBUSY; | 
|  |  | 
|  | it8761e_gpio_chip.base = -1; | 
|  | it8761e_gpio_chip.ngpio = 16; | 
|  |  | 
|  | err = gpiochip_add(&it8761e_gpio_chip); | 
|  | if (err < 0) | 
|  | goto gpiochip_add_err; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | gpiochip_add_err: | 
|  | release_region(gpio_ba, GPIO_IOSIZE); | 
|  | gpio_ba = 0; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __exit it8761e_gpio_exit(void) | 
|  | { | 
|  | if (gpio_ba) { | 
|  | int ret = gpiochip_remove(&it8761e_gpio_chip); | 
|  |  | 
|  | WARN(ret, "%s(): gpiochip_remove() failed, ret=%d\n", | 
|  | __func__, ret); | 
|  |  | 
|  | release_region(gpio_ba, GPIO_IOSIZE); | 
|  | gpio_ba = 0; | 
|  | } | 
|  | } | 
|  | module_init(it8761e_gpio_init); | 
|  | module_exit(it8761e_gpio_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); | 
|  | MODULE_DESCRIPTION("GPIO interface for IT8761E Super I/O chip"); | 
|  | MODULE_LICENSE("GPL"); |