usb: Convert all users to new usb_phy
Use the new usb_phy_* functions with transceiver
operations instead of the old otg functions.
Includes fixes from Sascha Hauer.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Acked-by: Li Yang <leoli@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index cb942b6..ba96740 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -364,7 +364,7 @@
return -ENODEV;
usb_nop_xceiv_register();
- musb->xceiv = otg_get_transceiver();
+ musb->xceiv = usb_get_transceiver();
if (!musb->xceiv)
return -ENODEV;
@@ -406,7 +406,7 @@
if (data->set_phy_power)
data->set_phy_power(0);
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index fc8e9ed..5fefd65 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -415,7 +415,7 @@
gpio_direction_output(musb->config->gpio_vrsel, 0);
usb_nop_xceiv_register();
- musb->xceiv = otg_get_transceiver();
+ musb->xceiv = usb_get_transceiver();
if (!musb->xceiv) {
gpio_free(musb->config->gpio_vrsel);
return -ENODEV;
@@ -440,7 +440,7 @@
{
gpio_free(musb->config->gpio_vrsel);
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
}
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index f0cb776..bd38119 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -425,7 +425,7 @@
goto fail;
usb_nop_xceiv_register();
- musb->xceiv = otg_get_transceiver();
+ musb->xceiv = usb_get_transceiver();
if (!musb->xceiv)
goto fail;
@@ -458,7 +458,7 @@
phy_off();
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index f2a63dd..49a47d2 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -384,7 +384,7 @@
u32 revision;
usb_nop_xceiv_register();
- musb->xceiv = otg_get_transceiver();
+ musb->xceiv = usb_get_transceiver();
if (!musb->xceiv)
return -ENODEV;
@@ -443,7 +443,7 @@
return 0;
fail:
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return -ENODEV;
}
@@ -492,7 +492,7 @@
phy_off();
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index f9ecd5e..7e9be74 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -131,9 +131,9 @@
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
-static int musb_ulpi_read(struct usb_phy *otg, u32 offset)
+static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
{
- void __iomem *addr = otg->io_priv;
+ void __iomem *addr = phy->io_priv;
int i = 0;
u8 r;
u8 power;
@@ -165,10 +165,9 @@
return musb_readb(addr, MUSB_ULPI_REG_DATA);
}
-static int musb_ulpi_write(struct usb_phy *otg,
- u32 offset, u32 data)
+static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
{
- void __iomem *addr = otg->io_priv;
+ void __iomem *addr = phy->io_priv;
int i = 0;
u8 r = 0;
u8 power;
@@ -200,7 +199,7 @@
#define musb_ulpi_write NULL
#endif
-static struct otg_io_access_ops musb_ulpi_access = {
+static struct usb_phy_io_ops musb_ulpi_access = {
.read = musb_ulpi_read,
.write = musb_ulpi_write,
};
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 0524a34..3a17936 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1703,7 +1703,7 @@
if (!musb->xceiv->set_power)
return -EOPNOTSUPP;
- return otg_set_power(musb->xceiv, mA);
+ return usb_phy_set_power(musb->xceiv, mA);
}
static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a427fcb..96a3d37 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -247,7 +247,7 @@
if (!is_otg_enabled(musb) || musb->gadget_driver) {
pm_runtime_get_sync(musb->controller);
- otg_init(musb->xceiv);
+ usb_phy_init(musb->xceiv);
omap2430_musb_set_vbus(musb, 1);
}
break;
@@ -257,7 +257,7 @@
if (musb->gadget_driver)
pm_runtime_get_sync(musb->controller);
- otg_init(musb->xceiv);
+ usb_phy_init(musb->xceiv);
break;
case USB_EVENT_NONE:
@@ -273,7 +273,7 @@
if (musb->xceiv->set_vbus)
otg_set_vbus(musb->xceiv, 0);
}
- otg_shutdown(musb->xceiv);
+ usb_phy_shutdown(musb->xceiv);
break;
default:
dev_dbg(musb->controller, "ID float\n");
@@ -291,7 +291,7 @@
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
*/
- musb->xceiv = otg_get_transceiver();
+ musb->xceiv = usb_get_transceiver();
if (!musb->xceiv) {
pr_err("HS USB OTG: no transceiver configured\n");
return -ENODEV;
@@ -326,7 +326,7 @@
musb_readl(musb->mregs, OTG_SIMENABLE));
musb->nb.notifier_call = musb_otg_notifications;
- status = otg_register_notifier(musb->xceiv, &musb->nb);
+ status = usb_register_notifier(musb->xceiv, &musb->nb);
if (status)
dev_dbg(musb->controller, "notification register failed\n");
@@ -350,7 +350,7 @@
switch (musb->xceiv->last_event) {
case USB_EVENT_ID:
- otg_init(musb->xceiv);
+ usb_phy_init(musb->xceiv);
if (data->interface_type != MUSB_INTERFACE_UTMI)
break;
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
@@ -369,7 +369,7 @@
break;
case USB_EVENT_VBUS:
- otg_init(musb->xceiv);
+ usb_phy_init(musb->xceiv);
break;
default:
@@ -380,7 +380,7 @@
static void omap2430_musb_disable(struct musb *musb)
{
if (musb->xceiv->last_event)
- otg_shutdown(musb->xceiv);
+ usb_phy_shutdown(musb->xceiv);
}
static int omap2430_musb_exit(struct musb *musb)
@@ -389,7 +389,7 @@
cancel_work_sync(&musb->otg_notifier_work);
omap2430_low_level_exit(musb);
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
return 0;
}
@@ -495,7 +495,7 @@
OTG_INTERFSEL);
omap2430_low_level_exit(musb);
- otg_set_suspend(musb->xceiv, 1);
+ usb_phy_set_suspend(musb->xceiv, 1);
return 0;
}
@@ -509,7 +509,7 @@
musb_writel(musb->mregs, OTG_INTERFSEL,
musb->context.otg_interfsel);
- otg_set_suspend(musb->xceiv, 0);
+ usb_phy_set_suspend(musb->xceiv, 0);
return 0;
}
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 0665c14..496cc03 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1078,7 +1078,7 @@
int ret;
usb_nop_xceiv_register();
- musb->xceiv = otg_get_transceiver();
+ musb->xceiv = usb_get_transceiver();
if (!musb->xceiv)
return -ENODEV;
@@ -1130,7 +1130,7 @@
if (sync)
iounmap(sync);
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
}
return ret;
@@ -1146,7 +1146,7 @@
iounmap(musb->sync_va);
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
}
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index f7e04bf..0f56674 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -37,7 +37,7 @@
static int ux500_musb_init(struct musb *musb)
{
- musb->xceiv = otg_get_transceiver();
+ musb->xceiv = usb_get_transceiver();
if (!musb->xceiv) {
pr_err("HS USB OTG: no transceiver configured\n");
return -ENODEV;
@@ -48,7 +48,7 @@
static int ux500_musb_exit(struct musb *musb)
{
- otg_put_transceiver(musb->xceiv);
+ usb_put_transceiver(musb->xceiv);
return 0;
}
@@ -160,7 +160,7 @@
struct ux500_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- otg_set_suspend(musb->xceiv, 1);
+ usb_phy_set_suspend(musb->xceiv, 1);
clk_disable(glue->clk);
return 0;
@@ -178,7 +178,7 @@
return ret;
}
- otg_set_suspend(musb->xceiv, 0);
+ usb_phy_set_suspend(musb->xceiv, 0);
return 0;
}