| /* | 
 |  * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling | 
 |  * | 
 |  * Copyright (C) 2006-2008 Barco N.V. | 
 |  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and | 
 |  *    based on multiple host controller drivers inside the linux kernel. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, | 
 |  * MA  02110-1301  USA. | 
 |  */ | 
 |  | 
 | #include <linux/kthread.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include "c67x00.h" | 
 | #include "c67x00-hcd.h" | 
 |  | 
 | /* | 
 |  * These are the stages for a control urb, they are kept | 
 |  * in both urb->interval and td->privdata. | 
 |  */ | 
 | #define SETUP_STAGE		0 | 
 | #define DATA_STAGE		1 | 
 | #define STATUS_STAGE		2 | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * struct c67x00_ep_data: Host endpoint data structure | 
 |  */ | 
 | struct c67x00_ep_data { | 
 | 	struct list_head queue; | 
 | 	struct list_head node; | 
 | 	struct usb_host_endpoint *hep; | 
 | 	struct usb_device *dev; | 
 | 	u16 next_frame;		/* For int/isoc transactions */ | 
 | }; | 
 |  | 
 | /** | 
 |  * struct c67x00_td | 
 |  * | 
 |  * Hardware parts are little endiannes, SW in CPU endianess. | 
 |  */ | 
 | struct c67x00_td { | 
 | 	/* HW specific part */ | 
 | 	__le16 ly_base_addr;	/* Bytes 0-1 */ | 
 | 	__le16 port_length;	/* Bytes 2-3 */ | 
 | 	u8 pid_ep;		/* Byte 4 */ | 
 | 	u8 dev_addr;		/* Byte 5 */ | 
 | 	u8 ctrl_reg;		/* Byte 6 */ | 
 | 	u8 status;		/* Byte 7 */ | 
 | 	u8 retry_cnt;		/* Byte 8 */ | 
 | #define TT_OFFSET		2 | 
 | #define TT_CONTROL		0 | 
 | #define TT_ISOCHRONOUS		1 | 
 | #define TT_BULK			2 | 
 | #define TT_INTERRUPT		3 | 
 | 	u8 residue;		/* Byte 9 */ | 
 | 	__le16 next_td_addr;	/* Bytes 10-11 */ | 
 | 	/* SW part */ | 
 | 	struct list_head td_list; | 
 | 	u16 td_addr; | 
 | 	void *data; | 
 | 	struct urb *urb; | 
 | 	unsigned long privdata; | 
 |  | 
 | 	/* These are needed for handling the toggle bits: | 
 | 	 * an urb can be dequeued while a td is in progress | 
 | 	 * after checking the td, the toggle bit might need to | 
 | 	 * be fixed */ | 
 | 	struct c67x00_ep_data *ep_data; | 
 | 	unsigned int pipe; | 
 | }; | 
 |  | 
 | struct c67x00_urb_priv { | 
 | 	struct list_head hep_node; | 
 | 	struct urb *urb; | 
 | 	int port; | 
 | 	int cnt;		/* packet number for isoc */ | 
 | 	int status; | 
 | 	struct c67x00_ep_data *ep_data; | 
 | }; | 
 |  | 
 | #define td_udev(td)	((td)->ep_data->dev) | 
 |  | 
 | #define CY_TD_SIZE		12 | 
 |  | 
 | #define TD_PIDEP_OFFSET		0x04 | 
 | #define TD_PIDEPMASK_PID	0xF0 | 
 | #define TD_PIDEPMASK_EP		0x0F | 
 | #define TD_PORTLENMASK_DL	0x02FF | 
 | #define TD_PORTLENMASK_PN	0xC000 | 
 |  | 
 | #define TD_STATUS_OFFSET	0x07 | 
 | #define TD_STATUSMASK_ACK	0x01 | 
 | #define TD_STATUSMASK_ERR	0x02 | 
 | #define TD_STATUSMASK_TMOUT	0x04 | 
 | #define TD_STATUSMASK_SEQ	0x08 | 
 | #define TD_STATUSMASK_SETUP	0x10 | 
 | #define TD_STATUSMASK_OVF	0x20 | 
 | #define TD_STATUSMASK_NAK	0x40 | 
 | #define TD_STATUSMASK_STALL	0x80 | 
 |  | 
 | #define TD_ERROR_MASK		(TD_STATUSMASK_ERR | TD_STATUSMASK_TMOUT | \ | 
 | 				 TD_STATUSMASK_STALL) | 
 |  | 
 | #define TD_RETRYCNT_OFFSET	0x08 | 
 | #define TD_RETRYCNTMASK_ACT_FLG	0x10 | 
 | #define TD_RETRYCNTMASK_TX_TYPE	0x0C | 
 | #define TD_RETRYCNTMASK_RTY_CNT	0x03 | 
 |  | 
 | #define TD_RESIDUE_OVERFLOW	0x80 | 
 |  | 
 | #define TD_PID_IN		0x90 | 
 |  | 
 | /* Residue: signed 8bits, neg -> OVERFLOW, pos -> UNDERFLOW */ | 
 | #define td_residue(td)		((__s8)(td->residue)) | 
 | #define td_ly_base_addr(td)	(__le16_to_cpu((td)->ly_base_addr)) | 
 | #define td_port_length(td)	(__le16_to_cpu((td)->port_length)) | 
 | #define td_next_td_addr(td)	(__le16_to_cpu((td)->next_td_addr)) | 
 |  | 
 | #define td_active(td)		((td)->retry_cnt & TD_RETRYCNTMASK_ACT_FLG) | 
 | #define td_length(td)		(td_port_length(td) & TD_PORTLENMASK_DL) | 
 |  | 
 | #define td_sequence_ok(td)	(!td->status || \ | 
 | 				 (!(td->status & TD_STATUSMASK_SEQ) ==	\ | 
 | 				  !(td->ctrl_reg & SEQ_SEL))) | 
 |  | 
 | #define td_acked(td)		(!td->status || \ | 
 | 				 (td->status & TD_STATUSMASK_ACK)) | 
 | #define td_actual_bytes(td)	(td_length(td) - td_residue(td)) | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | #ifdef DEBUG | 
 |  | 
 | /** | 
 |  * dbg_td - Dump the contents of the TD | 
 |  */ | 
 | static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg) | 
 | { | 
 | 	struct device *dev = c67x00_hcd_dev(c67x00); | 
 |  | 
 | 	dev_dbg(dev, "### %s at 0x%04x\n", msg, td->td_addr); | 
 | 	dev_dbg(dev, "urb:      0x%p\n", td->urb); | 
 | 	dev_dbg(dev, "endpoint:   %4d\n", usb_pipeendpoint(td->pipe)); | 
 | 	dev_dbg(dev, "pipeout:    %4d\n", usb_pipeout(td->pipe)); | 
 | 	dev_dbg(dev, "ly_base_addr: 0x%04x\n", td_ly_base_addr(td)); | 
 | 	dev_dbg(dev, "port_length:  0x%04x\n", td_port_length(td)); | 
 | 	dev_dbg(dev, "pid_ep:         0x%02x\n", td->pid_ep); | 
 | 	dev_dbg(dev, "dev_addr:       0x%02x\n", td->dev_addr); | 
 | 	dev_dbg(dev, "ctrl_reg:       0x%02x\n", td->ctrl_reg); | 
 | 	dev_dbg(dev, "status:         0x%02x\n", td->status); | 
 | 	dev_dbg(dev, "retry_cnt:      0x%02x\n", td->retry_cnt); | 
 | 	dev_dbg(dev, "residue:        0x%02x\n", td->residue); | 
 | 	dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td)); | 
 | 	dev_dbg(dev, "data:"); | 
 | 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, | 
 | 		       td->data, td_length(td), 1); | 
 | } | 
 | #else				/* DEBUG */ | 
 |  | 
 | static inline void | 
 | dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg) { } | 
 |  | 
 | #endif				/* DEBUG */ | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 | /* Helper functions */ | 
 |  | 
 | static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK; | 
 | } | 
 |  | 
 | /** | 
 |  * frame_add | 
 |  * Software wraparound for framenumbers. | 
 |  */ | 
 | static inline u16 frame_add(u16 a, u16 b) | 
 | { | 
 | 	return (a + b) & HOST_FRAME_MASK; | 
 | } | 
 |  | 
 | /** | 
 |  * frame_after - is frame a after frame b | 
 |  */ | 
 | static inline int frame_after(u16 a, u16 b) | 
 | { | 
 | 	return ((HOST_FRAME_MASK + a - b) & HOST_FRAME_MASK) < | 
 | 	    (HOST_FRAME_MASK / 2); | 
 | } | 
 |  | 
 | /** | 
 |  * frame_after_eq - is frame a after or equal to frame b | 
 |  */ | 
 | static inline int frame_after_eq(u16 a, u16 b) | 
 | { | 
 | 	return ((HOST_FRAME_MASK + 1 + a - b) & HOST_FRAME_MASK) < | 
 | 	    (HOST_FRAME_MASK / 2); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * c67x00_release_urb - remove link from all tds to this urb | 
 |  * Disconnects the urb from it's tds, so that it can be given back. | 
 |  * pre: urb->hcpriv != NULL | 
 |  */ | 
 | static void c67x00_release_urb(struct c67x00_hcd *c67x00, struct urb *urb) | 
 | { | 
 | 	struct c67x00_td *td; | 
 | 	struct c67x00_urb_priv *urbp; | 
 |  | 
 | 	BUG_ON(!urb); | 
 |  | 
 | 	c67x00->urb_count--; | 
 |  | 
 | 	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { | 
 | 		c67x00->urb_iso_count--; | 
 | 		if (c67x00->urb_iso_count == 0) | 
 | 			c67x00->max_frame_bw = MAX_FRAME_BW_STD; | 
 | 	} | 
 |  | 
 | 	/* TODO this might be not so efficient when we've got many urbs! | 
 | 	 * Alternatives: | 
 | 	 *   * only clear when needed | 
 | 	 *   * keep a list of tds with each urbp | 
 | 	 */ | 
 | 	list_for_each_entry(td, &c67x00->td_list, td_list) | 
 | 		if (urb == td->urb) | 
 | 			td->urb = NULL; | 
 |  | 
 | 	urbp = urb->hcpriv; | 
 | 	urb->hcpriv = NULL; | 
 | 	list_del(&urbp->hep_node); | 
 | 	kfree(urbp); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | static struct c67x00_ep_data * | 
 | c67x00_ep_data_alloc(struct c67x00_hcd *c67x00, struct urb *urb) | 
 | { | 
 | 	struct usb_host_endpoint *hep = urb->ep; | 
 | 	struct c67x00_ep_data *ep_data; | 
 | 	int type; | 
 |  | 
 | 	c67x00->current_frame = c67x00_get_current_frame_number(c67x00); | 
 |  | 
 | 	/* Check if endpoint already has a c67x00_ep_data struct allocated */ | 
 | 	if (hep->hcpriv) { | 
 | 		ep_data = hep->hcpriv; | 
 | 		if (frame_after(c67x00->current_frame, ep_data->next_frame)) | 
 | 			ep_data->next_frame = | 
 | 			    frame_add(c67x00->current_frame, 1); | 
 | 		return hep->hcpriv; | 
 | 	} | 
 |  | 
 | 	/* Allocate and initialize a new c67x00 endpoint data structure */ | 
 | 	ep_data = kzalloc(sizeof(*ep_data), GFP_ATOMIC); | 
 | 	if (!ep_data) | 
 | 		return NULL; | 
 |  | 
 | 	INIT_LIST_HEAD(&ep_data->queue); | 
 | 	INIT_LIST_HEAD(&ep_data->node); | 
 | 	ep_data->hep = hep; | 
 |  | 
 | 	/* hold a reference to udev as long as this endpoint lives, | 
 | 	 * this is needed to possibly fix the data toggle */ | 
 | 	ep_data->dev = usb_get_dev(urb->dev); | 
 | 	hep->hcpriv = ep_data; | 
 |  | 
 | 	/* For ISOC and INT endpoints, start ASAP: */ | 
 | 	ep_data->next_frame = frame_add(c67x00->current_frame, 1); | 
 |  | 
 | 	/* Add the endpoint data to one of the pipe lists; must be added | 
 | 	   in order of endpoint address */ | 
 | 	type = usb_pipetype(urb->pipe); | 
 | 	if (list_empty(&ep_data->node)) { | 
 | 		list_add(&ep_data->node, &c67x00->list[type]); | 
 | 	} else { | 
 | 		struct c67x00_ep_data *prev; | 
 |  | 
 | 		list_for_each_entry(prev, &c67x00->list[type], node) { | 
 | 			if (prev->hep->desc.bEndpointAddress > | 
 | 			    hep->desc.bEndpointAddress) { | 
 | 				list_add(&ep_data->node, prev->node.prev); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ep_data; | 
 | } | 
 |  | 
 | static int c67x00_ep_data_free(struct usb_host_endpoint *hep) | 
 | { | 
 | 	struct c67x00_ep_data *ep_data = hep->hcpriv; | 
 |  | 
 | 	if (!ep_data) | 
 | 		return 0; | 
 |  | 
 | 	if (!list_empty(&ep_data->queue)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	usb_put_dev(ep_data->dev); | 
 | 	list_del(&ep_data->queue); | 
 | 	list_del(&ep_data->node); | 
 |  | 
 | 	kfree(ep_data); | 
 | 	hep->hcpriv = NULL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) | 
 | { | 
 | 	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (!list_empty(&ep->urb_list)) | 
 | 		dev_warn(c67x00_hcd_dev(c67x00), "error: urb list not empty\n"); | 
 |  | 
 | 	spin_lock_irqsave(&c67x00->lock, flags); | 
 |  | 
 | 	/* loop waiting for all transfers in the endpoint queue to complete */ | 
 | 	while (c67x00_ep_data_free(ep)) { | 
 | 		/* Drop the lock so we can sleep waiting for the hardware */ | 
 | 		spin_unlock_irqrestore(&c67x00->lock, flags); | 
 |  | 
 | 		/* it could happen that we reinitialize this completion, while | 
 | 		 * somebody was waiting for that completion.  The timeout and | 
 | 		 * while loop handle such cases, but this might be improved */ | 
 | 		INIT_COMPLETION(c67x00->endpoint_disable); | 
 | 		c67x00_sched_kick(c67x00); | 
 | 		wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ); | 
 |  | 
 | 		spin_lock_irqsave(&c67x00->lock, flags); | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&c67x00->lock, flags); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | static inline int get_root_port(struct usb_device *dev) | 
 | { | 
 | 	while (dev->parent->parent) | 
 | 		dev = dev->parent; | 
 | 	return dev->portnum; | 
 | } | 
 |  | 
 | int c67x00_urb_enqueue(struct usb_hcd *hcd, | 
 | 		       struct urb *urb, gfp_t mem_flags) | 
 | { | 
 | 	int ret; | 
 | 	unsigned long flags; | 
 | 	struct c67x00_urb_priv *urbp; | 
 | 	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); | 
 | 	int port = get_root_port(urb->dev)-1; | 
 |  | 
 | 	spin_lock_irqsave(&c67x00->lock, flags); | 
 |  | 
 | 	/* Make sure host controller is running */ | 
 | 	if (!HC_IS_RUNNING(hcd->state)) { | 
 | 		ret = -ENODEV; | 
 | 		goto err_not_linked; | 
 | 	} | 
 |  | 
 | 	ret = usb_hcd_link_urb_to_ep(hcd, urb); | 
 | 	if (ret) | 
 | 		goto err_not_linked; | 
 |  | 
 | 	/* Allocate and initialize urb private data */ | 
 | 	urbp = kzalloc(sizeof(*urbp), mem_flags); | 
 | 	if (!urbp) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_urbp; | 
 | 	} | 
 |  | 
 | 	INIT_LIST_HEAD(&urbp->hep_node); | 
 | 	urbp->urb = urb; | 
 | 	urbp->port = port; | 
 |  | 
 | 	urbp->ep_data = c67x00_ep_data_alloc(c67x00, urb); | 
 |  | 
 | 	if (!urbp->ep_data) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_epdata; | 
 | 	} | 
 |  | 
 | 	/* TODO claim bandwidth with usb_claim_bandwidth? | 
 | 	 * also release it somewhere! */ | 
 |  | 
 | 	urb->hcpriv = urbp; | 
 |  | 
 | 	urb->actual_length = 0;	/* Nothing received/transmitted yet */ | 
 |  | 
 | 	switch (usb_pipetype(urb->pipe)) { | 
 | 	case PIPE_CONTROL: | 
 | 		urb->interval = SETUP_STAGE; | 
 | 		break; | 
 | 	case PIPE_INTERRUPT: | 
 | 		break; | 
 | 	case PIPE_BULK: | 
 | 		break; | 
 | 	case PIPE_ISOCHRONOUS: | 
 | 		if (c67x00->urb_iso_count == 0) | 
 | 			c67x00->max_frame_bw = MAX_FRAME_BW_ISO; | 
 | 		c67x00->urb_iso_count++; | 
 | 		/* Assume always URB_ISO_ASAP, FIXME */ | 
 | 		if (list_empty(&urbp->ep_data->queue)) | 
 | 			urb->start_frame = urbp->ep_data->next_frame; | 
 | 		else { | 
 | 			/* Go right after the last one */ | 
 | 			struct urb *last_urb; | 
 |  | 
 | 			last_urb = list_entry(urbp->ep_data->queue.prev, | 
 | 					      struct c67x00_urb_priv, | 
 | 					      hep_node)->urb; | 
 | 			urb->start_frame = | 
 | 			    frame_add(last_urb->start_frame, | 
 | 				      last_urb->number_of_packets * | 
 | 				      last_urb->interval); | 
 | 		} | 
 | 		urbp->cnt = 0; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* Add the URB to the endpoint queue */ | 
 | 	list_add_tail(&urbp->hep_node, &urbp->ep_data->queue); | 
 |  | 
 | 	/* If this is the only URB, kick start the controller */ | 
 | 	if (!c67x00->urb_count++) | 
 | 		c67x00_ll_hpi_enable_sofeop(c67x00->sie); | 
 |  | 
 | 	c67x00_sched_kick(c67x00); | 
 | 	spin_unlock_irqrestore(&c67x00->lock, flags); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_epdata: | 
 | 	kfree(urbp); | 
 | err_urbp: | 
 | 	usb_hcd_unlink_urb_from_ep(hcd, urb); | 
 | err_not_linked: | 
 | 	spin_unlock_irqrestore(&c67x00->lock, flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) | 
 | { | 
 | 	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); | 
 | 	unsigned long flags; | 
 | 	int rc; | 
 |  | 
 | 	spin_lock_irqsave(&c67x00->lock, flags); | 
 | 	rc = usb_hcd_check_unlink_urb(hcd, urb, status); | 
 | 	if (rc) | 
 | 		goto done; | 
 |  | 
 | 	c67x00_release_urb(c67x00, urb); | 
 | 	usb_hcd_unlink_urb_from_ep(hcd, urb); | 
 |  | 
 | 	spin_unlock(&c67x00->lock); | 
 | 	usb_hcd_giveback_urb(hcd, urb, status); | 
 | 	spin_lock(&c67x00->lock); | 
 |  | 
 | 	spin_unlock_irqrestore(&c67x00->lock, flags); | 
 |  | 
 | 	return 0; | 
 |  | 
 |  done: | 
 | 	spin_unlock_irqrestore(&c67x00->lock, flags); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * pre: c67x00 locked, urb unlocked | 
 |  */ | 
 | static void | 
 | c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status) | 
 | { | 
 | 	struct c67x00_urb_priv *urbp; | 
 |  | 
 | 	if (!urb) | 
 | 		return; | 
 |  | 
 | 	urbp = urb->hcpriv; | 
 | 	urbp->status = status; | 
 |  | 
 | 	list_del_init(&urbp->hep_node); | 
 |  | 
 | 	c67x00_release_urb(c67x00, urb); | 
 | 	usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); | 
 | 	spin_unlock(&c67x00->lock); | 
 | 	usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); | 
 | 	spin_lock(&c67x00->lock); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb, | 
 | 				 int len, int periodic) | 
 | { | 
 | 	struct c67x00_urb_priv *urbp = urb->hcpriv; | 
 | 	int bit_time; | 
 |  | 
 | 	/* According to the C67x00 BIOS user manual, page 3-18,19, the | 
 | 	 * following calculations provide the full speed bit times for | 
 | 	 * a transaction. | 
 | 	 * | 
 | 	 * FS(in)	= 112.5 +  9.36*BC + HOST_DELAY | 
 | 	 * FS(in,iso)	=  90.5 +  9.36*BC + HOST_DELAY | 
 | 	 * FS(out)	= 112.5 +  9.36*BC + HOST_DELAY | 
 | 	 * FS(out,iso)	=  78.4 +  9.36*BC + HOST_DELAY | 
 | 	 * LS(in)	= 802.4 + 75.78*BC + HOST_DELAY | 
 | 	 * LS(out)	= 802.6 + 74.67*BC + HOST_DELAY | 
 | 	 * | 
 | 	 * HOST_DELAY == 106 for the c67200 and c67300. | 
 | 	 */ | 
 |  | 
 | 	/* make calculations in 1/100 bit times to maintain resolution */ | 
 | 	if (urbp->ep_data->dev->speed == USB_SPEED_LOW) { | 
 | 		/* Low speed pipe */ | 
 | 		if (usb_pipein(urb->pipe)) | 
 | 			bit_time = 80240 + 7578*len; | 
 | 		else | 
 | 			bit_time = 80260 + 7467*len; | 
 | 	} else { | 
 | 		/* FS pipes */ | 
 | 		if (usb_pipeisoc(urb->pipe)) | 
 | 			bit_time = usb_pipein(urb->pipe) ? 9050 : 7840; | 
 | 		else | 
 | 			bit_time = 11250; | 
 | 		bit_time += 936*len; | 
 | 	} | 
 |  | 
 | 	/* Scale back down to integer bit times.  Use a host delay of 106. | 
 | 	 * (this is the only place it is used) */ | 
 | 	bit_time = ((bit_time+50) / 100) + 106; | 
 |  | 
 | 	if (unlikely(bit_time + c67x00->bandwidth_allocated >= | 
 | 		     c67x00->max_frame_bw)) | 
 | 		return -EMSGSIZE; | 
 |  | 
 | 	if (unlikely(c67x00->next_td_addr + CY_TD_SIZE >= | 
 | 		     c67x00->td_base_addr + SIE_TD_SIZE)) | 
 | 		return -EMSGSIZE; | 
 |  | 
 | 	if (unlikely(c67x00->next_buf_addr + len >= | 
 | 		     c67x00->buf_base_addr + SIE_TD_BUF_SIZE)) | 
 | 		return -EMSGSIZE; | 
 |  | 
 | 	if (periodic) { | 
 | 		if (unlikely(bit_time + c67x00->periodic_bw_allocated >= | 
 | 			     MAX_PERIODIC_BW(c67x00->max_frame_bw))) | 
 | 			return -EMSGSIZE; | 
 | 		c67x00->periodic_bw_allocated += bit_time; | 
 | 	} | 
 |  | 
 | 	c67x00->bandwidth_allocated += bit_time; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * td_addr and buf_addr must be word aligned | 
 |  */ | 
 | static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb, | 
 | 			    void *data, int len, int pid, int toggle, | 
 | 			    unsigned long privdata) | 
 | { | 
 | 	struct c67x00_td *td; | 
 | 	struct c67x00_urb_priv *urbp = urb->hcpriv; | 
 | 	const __u8 active_flag = 1, retry_cnt = 1; | 
 | 	__u8 cmd = 0; | 
 | 	int tt = 0; | 
 |  | 
 | 	if (c67x00_claim_frame_bw(c67x00, urb, len, usb_pipeisoc(urb->pipe) | 
 | 				  || usb_pipeint(urb->pipe))) | 
 | 		return -EMSGSIZE;	/* Not really an error, but expected */ | 
 |  | 
 | 	td = kzalloc(sizeof(*td), GFP_ATOMIC); | 
 | 	if (!td) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	td->pipe = urb->pipe; | 
 | 	td->ep_data = urbp->ep_data; | 
 |  | 
 | 	if ((td_udev(td)->speed == USB_SPEED_LOW) && | 
 | 	    !(c67x00->low_speed_ports & (1 << urbp->port))) | 
 | 		cmd |= PREAMBLE_EN; | 
 |  | 
 | 	switch (usb_pipetype(td->pipe)) { | 
 | 	case PIPE_ISOCHRONOUS: | 
 | 		tt = TT_ISOCHRONOUS; | 
 | 		cmd |= ISO_EN; | 
 | 		break; | 
 | 	case PIPE_CONTROL: | 
 | 		tt = TT_CONTROL; | 
 | 		break; | 
 | 	case PIPE_BULK: | 
 | 		tt = TT_BULK; | 
 | 		break; | 
 | 	case PIPE_INTERRUPT: | 
 | 		tt = TT_INTERRUPT; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (toggle) | 
 | 		cmd |= SEQ_SEL; | 
 |  | 
 | 	cmd |= ARM_EN; | 
 |  | 
 | 	/* SW part */ | 
 | 	td->td_addr = c67x00->next_td_addr; | 
 | 	c67x00->next_td_addr = c67x00->next_td_addr + CY_TD_SIZE; | 
 |  | 
 | 	/* HW part */ | 
 | 	td->ly_base_addr = __cpu_to_le16(c67x00->next_buf_addr); | 
 | 	td->port_length = __cpu_to_le16((c67x00->sie->sie_num << 15) | | 
 | 					(urbp->port << 14) | (len & 0x3FF)); | 
 | 	td->pid_ep = ((pid & 0xF) << TD_PIDEP_OFFSET) | | 
 | 	    (usb_pipeendpoint(td->pipe) & 0xF); | 
 | 	td->dev_addr = usb_pipedevice(td->pipe) & 0x7F; | 
 | 	td->ctrl_reg = cmd; | 
 | 	td->status = 0; | 
 | 	td->retry_cnt = (tt << TT_OFFSET) | (active_flag << 4) | retry_cnt; | 
 | 	td->residue = 0; | 
 | 	td->next_td_addr = __cpu_to_le16(c67x00->next_td_addr); | 
 |  | 
 | 	/* SW part */ | 
 | 	td->data = data; | 
 | 	td->urb = urb; | 
 | 	td->privdata = privdata; | 
 |  | 
 | 	c67x00->next_buf_addr += (len + 1) & ~0x01;	/* properly align */ | 
 |  | 
 | 	list_add_tail(&td->td_list, &c67x00->td_list); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline void c67x00_release_td(struct c67x00_td *td) | 
 | { | 
 | 	list_del_init(&td->td_list); | 
 | 	kfree(td); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb) | 
 | { | 
 | 	int remaining; | 
 | 	int toggle; | 
 | 	int pid; | 
 | 	int ret = 0; | 
 | 	int maxps; | 
 | 	int need_empty; | 
 |  | 
 | 	toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), | 
 | 			       usb_pipeout(urb->pipe)); | 
 | 	remaining = urb->transfer_buffer_length - urb->actual_length; | 
 |  | 
 | 	maxps = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); | 
 |  | 
 | 	need_empty = (urb->transfer_flags & URB_ZERO_PACKET) && | 
 | 	    usb_pipeout(urb->pipe) && !(remaining % maxps); | 
 |  | 
 | 	while (remaining || need_empty) { | 
 | 		int len; | 
 | 		char *td_buf; | 
 |  | 
 | 		len = (remaining > maxps) ? maxps : remaining; | 
 | 		if (!len) | 
 | 			need_empty = 0; | 
 |  | 
 | 		pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN; | 
 | 		td_buf = urb->transfer_buffer + urb->transfer_buffer_length - | 
 | 		    remaining; | 
 | 		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, toggle, | 
 | 				       DATA_STAGE); | 
 | 		if (ret) | 
 | 			return ret;	/* td wasn't created */ | 
 |  | 
 | 		toggle ^= 1; | 
 | 		remaining -= len; | 
 | 		if (usb_pipecontrol(urb->pipe)) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * return 0 in case more bandwidth is available, else errorcode | 
 |  */ | 
 | static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb) | 
 | { | 
 | 	int ret; | 
 | 	int pid; | 
 |  | 
 | 	switch (urb->interval) { | 
 | 	default: | 
 | 	case SETUP_STAGE: | 
 | 		ret = c67x00_create_td(c67x00, urb, urb->setup_packet, | 
 | 				       8, USB_PID_SETUP, 0, SETUP_STAGE); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		urb->interval = SETUP_STAGE; | 
 | 		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), | 
 | 			      usb_pipeout(urb->pipe), 1); | 
 | 		break; | 
 | 	case DATA_STAGE: | 
 | 		if (urb->transfer_buffer_length) { | 
 | 			ret = c67x00_add_data_urb(c67x00, urb); | 
 | 			if (ret) | 
 | 				return ret; | 
 | 			break; | 
 | 		}		/* else fallthrough */ | 
 | 	case STATUS_STAGE: | 
 | 		pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN; | 
 | 		ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1, | 
 | 				       STATUS_STAGE); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * return 0 in case more bandwidth is available, else errorcode | 
 |  */ | 
 | static int c67x00_add_int_urb(struct c67x00_hcd *c67x00, struct urb *urb) | 
 | { | 
 | 	struct c67x00_urb_priv *urbp = urb->hcpriv; | 
 |  | 
 | 	if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) { | 
 | 		urbp->ep_data->next_frame = | 
 | 		    frame_add(urbp->ep_data->next_frame, urb->interval); | 
 | 		return c67x00_add_data_urb(c67x00, urb); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb) | 
 | { | 
 | 	struct c67x00_urb_priv *urbp = urb->hcpriv; | 
 |  | 
 | 	if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) { | 
 | 		char *td_buf; | 
 | 		int len, pid, ret; | 
 |  | 
 | 		BUG_ON(urbp->cnt >= urb->number_of_packets); | 
 |  | 
 | 		td_buf = urb->transfer_buffer + | 
 | 		    urb->iso_frame_desc[urbp->cnt].offset; | 
 | 		len = urb->iso_frame_desc[urbp->cnt].length; | 
 | 		pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN; | 
 |  | 
 | 		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0, | 
 | 				       urbp->cnt); | 
 | 		if (ret) { | 
 | 			printk(KERN_DEBUG "create failed: %d\n", ret); | 
 | 			urb->iso_frame_desc[urbp->cnt].actual_length = 0; | 
 | 			urb->iso_frame_desc[urbp->cnt].status = ret; | 
 | 			if (urbp->cnt + 1 == urb->number_of_packets) | 
 | 				c67x00_giveback_urb(c67x00, urb, 0); | 
 | 		} | 
 |  | 
 | 		urbp->ep_data->next_frame = | 
 | 		    frame_add(urbp->ep_data->next_frame, urb->interval); | 
 | 		urbp->cnt++; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | static void c67x00_fill_from_list(struct c67x00_hcd *c67x00, int type, | 
 | 				  int (*add)(struct c67x00_hcd *, struct urb *)) | 
 | { | 
 | 	struct c67x00_ep_data *ep_data; | 
 | 	struct urb *urb; | 
 |  | 
 | 	/* traverse every endpoint on the list */ | 
 | 	list_for_each_entry(ep_data, &c67x00->list[type], node) { | 
 | 		if (!list_empty(&ep_data->queue)) { | 
 | 			/* and add the first urb */ | 
 | 			/* isochronous transfer rely on this */ | 
 | 			urb = list_entry(ep_data->queue.next, | 
 | 					 struct c67x00_urb_priv, | 
 | 					 hep_node)->urb; | 
 | 			add(c67x00, urb); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void c67x00_fill_frame(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	struct c67x00_td *td, *ttd; | 
 |  | 
 | 	/* Check if we can proceed */ | 
 | 	if (!list_empty(&c67x00->td_list)) { | 
 | 		dev_warn(c67x00_hcd_dev(c67x00), | 
 | 			 "TD list not empty! This should not happen!\n"); | 
 | 		list_for_each_entry_safe(td, ttd, &c67x00->td_list, td_list) { | 
 | 			dbg_td(c67x00, td, "Unprocessed td"); | 
 | 			c67x00_release_td(td); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Reinitialize variables */ | 
 | 	c67x00->bandwidth_allocated = 0; | 
 | 	c67x00->periodic_bw_allocated = 0; | 
 |  | 
 | 	c67x00->next_td_addr = c67x00->td_base_addr; | 
 | 	c67x00->next_buf_addr = c67x00->buf_base_addr; | 
 |  | 
 | 	/* Fill the list */ | 
 | 	c67x00_fill_from_list(c67x00, PIPE_ISOCHRONOUS, c67x00_add_iso_urb); | 
 | 	c67x00_fill_from_list(c67x00, PIPE_INTERRUPT, c67x00_add_int_urb); | 
 | 	c67x00_fill_from_list(c67x00, PIPE_CONTROL, c67x00_add_ctrl_urb); | 
 | 	c67x00_fill_from_list(c67x00, PIPE_BULK, c67x00_add_data_urb); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * Get TD from C67X00 | 
 |  */ | 
 | static inline void | 
 | c67x00_parse_td(struct c67x00_hcd *c67x00, struct c67x00_td *td) | 
 | { | 
 | 	c67x00_ll_read_mem_le16(c67x00->sie->dev, | 
 | 				td->td_addr, td, CY_TD_SIZE); | 
 |  | 
 | 	if (usb_pipein(td->pipe) && td_actual_bytes(td)) | 
 | 		c67x00_ll_read_mem_le16(c67x00->sie->dev, td_ly_base_addr(td), | 
 | 					td->data, td_actual_bytes(td)); | 
 | } | 
 |  | 
 | static int c67x00_td_to_error(struct c67x00_hcd *c67x00, struct c67x00_td *td) | 
 | { | 
 | 	if (td->status & TD_STATUSMASK_ERR) { | 
 | 		dbg_td(c67x00, td, "ERROR_FLAG"); | 
 | 		return -EILSEQ; | 
 | 	} | 
 | 	if (td->status & TD_STATUSMASK_STALL) { | 
 | 		/* dbg_td(c67x00, td, "STALL"); */ | 
 | 		return -EPIPE; | 
 | 	} | 
 | 	if (td->status & TD_STATUSMASK_TMOUT) { | 
 | 		dbg_td(c67x00, td, "TIMEOUT"); | 
 | 		return -ETIMEDOUT; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline int c67x00_end_of_data(struct c67x00_td *td) | 
 | { | 
 | 	int maxps, need_empty, remaining; | 
 | 	struct urb *urb = td->urb; | 
 | 	int act_bytes; | 
 |  | 
 | 	act_bytes = td_actual_bytes(td); | 
 |  | 
 | 	if (unlikely(!act_bytes)) | 
 | 		return 1;	/* This was an empty packet */ | 
 |  | 
 | 	maxps = usb_maxpacket(td_udev(td), td->pipe, usb_pipeout(td->pipe)); | 
 |  | 
 | 	if (unlikely(act_bytes < maxps)) | 
 | 		return 1;	/* Smaller then full packet */ | 
 |  | 
 | 	remaining = urb->transfer_buffer_length - urb->actual_length; | 
 | 	need_empty = (urb->transfer_flags & URB_ZERO_PACKET) && | 
 | 	    usb_pipeout(urb->pipe) && !(remaining % maxps); | 
 |  | 
 | 	if (unlikely(!remaining && !need_empty)) | 
 | 		return 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | /* Remove all td's from the list which come | 
 |  * after last_td and are meant for the same pipe. | 
 |  * This is used when a short packet has occured */ | 
 | static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00, | 
 | 				     struct c67x00_td *last_td) | 
 | { | 
 | 	struct c67x00_td *td, *tmp; | 
 | 	td = last_td; | 
 | 	tmp = last_td; | 
 | 	while (td->td_list.next != &c67x00->td_list) { | 
 | 		td = list_entry(td->td_list.next, struct c67x00_td, td_list); | 
 | 		if (td->pipe == last_td->pipe) { | 
 | 			c67x00_release_td(td); | 
 | 			td = tmp; | 
 | 		} | 
 | 		tmp = td; | 
 | 	} | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00, | 
 | 					struct c67x00_td *td) | 
 | { | 
 | 	struct urb *urb = td->urb; | 
 |  | 
 | 	if (!urb) | 
 | 		return; | 
 |  | 
 | 	urb->actual_length += td_actual_bytes(td); | 
 |  | 
 | 	switch (usb_pipetype(td->pipe)) { | 
 | 		/* isochronous tds are handled separately */ | 
 | 	case PIPE_CONTROL: | 
 | 		switch (td->privdata) { | 
 | 		case SETUP_STAGE: | 
 | 			urb->interval = | 
 | 			    urb->transfer_buffer_length ? | 
 | 			    DATA_STAGE : STATUS_STAGE; | 
 | 			/* Don't count setup_packet with normal data: */ | 
 | 			urb->actual_length = 0; | 
 | 			break; | 
 |  | 
 | 		case DATA_STAGE: | 
 | 			if (c67x00_end_of_data(td)) { | 
 | 				urb->interval = STATUS_STAGE; | 
 | 				c67x00_clear_pipe(c67x00, td); | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		case STATUS_STAGE: | 
 | 			urb->interval = 0; | 
 | 			c67x00_giveback_urb(c67x00, urb, 0); | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case PIPE_INTERRUPT: | 
 | 	case PIPE_BULK: | 
 | 		if (unlikely(c67x00_end_of_data(td))) { | 
 | 			c67x00_clear_pipe(c67x00, td); | 
 | 			c67x00_giveback_urb(c67x00, urb, 0); | 
 | 		} | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td) | 
 | { | 
 | 	struct urb *urb = td->urb; | 
 | 	struct c67x00_urb_priv *urbp; | 
 | 	int cnt; | 
 |  | 
 | 	if (!urb) | 
 | 		return; | 
 |  | 
 | 	urbp = urb->hcpriv; | 
 | 	cnt = td->privdata; | 
 |  | 
 | 	if (td->status & TD_ERROR_MASK) | 
 | 		urb->error_count++; | 
 |  | 
 | 	urb->iso_frame_desc[cnt].actual_length = td_actual_bytes(td); | 
 | 	urb->iso_frame_desc[cnt].status = c67x00_td_to_error(c67x00, td); | 
 | 	if (cnt + 1 == urb->number_of_packets)	/* Last packet */ | 
 | 		c67x00_giveback_urb(c67x00, urb, 0); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * c67x00_check_td_list - handle tds which have been processed by the c67x00 | 
 |  * pre: current_td == 0 | 
 |  */ | 
 | static inline void c67x00_check_td_list(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	struct c67x00_td *td, *tmp; | 
 | 	struct urb *urb; | 
 | 	int ack_ok; | 
 | 	int clear_endpoint; | 
 |  | 
 | 	list_for_each_entry_safe(td, tmp, &c67x00->td_list, td_list) { | 
 | 		/* get the TD */ | 
 | 		c67x00_parse_td(c67x00, td); | 
 | 		urb = td->urb;	/* urb can be NULL! */ | 
 | 		ack_ok = 0; | 
 | 		clear_endpoint = 1; | 
 |  | 
 | 		/* Handle isochronous transfers separately */ | 
 | 		if (usb_pipeisoc(td->pipe)) { | 
 | 			clear_endpoint = 0; | 
 | 			c67x00_handle_isoc(c67x00, td); | 
 | 			goto cont; | 
 | 		} | 
 |  | 
 | 		/* When an error occurs, all td's for that pipe go into an | 
 | 		 * inactive state. This state matches successful transfers so | 
 | 		 * we must make sure not to service them. */ | 
 | 		if (td->status & TD_ERROR_MASK) { | 
 | 			c67x00_giveback_urb(c67x00, urb, | 
 | 					    c67x00_td_to_error(c67x00, td)); | 
 | 			goto cont; | 
 | 		} | 
 |  | 
 | 		if ((td->status & TD_STATUSMASK_NAK) || !td_sequence_ok(td) || | 
 | 		    !td_acked(td)) | 
 | 			goto cont; | 
 |  | 
 | 		/* Sequence ok and acked, don't need to fix toggle */ | 
 | 		ack_ok = 1; | 
 |  | 
 | 		if (unlikely(td->status & TD_STATUSMASK_OVF)) { | 
 | 			if (td_residue(td) & TD_RESIDUE_OVERFLOW) { | 
 | 				/* Overflow */ | 
 | 				c67x00_giveback_urb(c67x00, urb, -EOVERFLOW); | 
 | 				goto cont; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		clear_endpoint = 0; | 
 | 		c67x00_handle_successful_td(c67x00, td); | 
 |  | 
 | cont: | 
 | 		if (clear_endpoint) | 
 | 			c67x00_clear_pipe(c67x00, td); | 
 | 		if (ack_ok) | 
 | 			usb_settoggle(td_udev(td), usb_pipeendpoint(td->pipe), | 
 | 				      usb_pipeout(td->pipe), | 
 | 				      !(td->ctrl_reg & SEQ_SEL)); | 
 | 		/* next in list could have been removed, due to clear_pipe! */ | 
 | 		tmp = list_entry(td->td_list.next, typeof(*td), td_list); | 
 | 		c67x00_release_td(td); | 
 | 	} | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	/* If all tds are processed, we can check the previous frame (if | 
 | 	 * there was any) and start our next frame. | 
 | 	 */ | 
 | 	return !c67x00_ll_husb_get_current_td(c67x00->sie); | 
 | } | 
 |  | 
 | /** | 
 |  * Send td to C67X00 | 
 |  */ | 
 | static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td) | 
 | { | 
 | 	int len = td_length(td); | 
 |  | 
 | 	if (len && ((td->pid_ep & TD_PIDEPMASK_PID) != TD_PID_IN)) | 
 | 		c67x00_ll_write_mem_le16(c67x00->sie->dev, td_ly_base_addr(td), | 
 | 					 td->data, len); | 
 |  | 
 | 	c67x00_ll_write_mem_le16(c67x00->sie->dev, | 
 | 				 td->td_addr, td, CY_TD_SIZE); | 
 | } | 
 |  | 
 | static void c67x00_send_frame(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	struct c67x00_td *td; | 
 |  | 
 | 	if (list_empty(&c67x00->td_list)) | 
 | 		dev_warn(c67x00_hcd_dev(c67x00), | 
 | 			 "%s: td list should not be empty here!\n", | 
 | 			 __func__); | 
 |  | 
 | 	list_for_each_entry(td, &c67x00->td_list, td_list) { | 
 | 		if (td->td_list.next == &c67x00->td_list) | 
 | 			td->next_td_addr = 0;	/* Last td in list */ | 
 |  | 
 | 		c67x00_send_td(c67x00, td); | 
 | 	} | 
 |  | 
 | 	c67x00_ll_husb_set_current_td(c67x00->sie, c67x00->td_base_addr); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * c67x00_do_work - Schedulers state machine | 
 |  */ | 
 | static void c67x00_do_work(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	spin_lock(&c67x00->lock); | 
 | 	/* Make sure all tds are processed */ | 
 | 	if (!c67x00_all_tds_processed(c67x00)) | 
 | 		goto out; | 
 |  | 
 | 	c67x00_check_td_list(c67x00); | 
 |  | 
 | 	/* no td's are being processed (current == 0) | 
 | 	 * and all have been "checked" */ | 
 | 	complete(&c67x00->endpoint_disable); | 
 |  | 
 | 	if (!list_empty(&c67x00->td_list)) | 
 | 		goto out; | 
 |  | 
 | 	c67x00->current_frame = c67x00_get_current_frame_number(c67x00); | 
 | 	if (c67x00->current_frame == c67x00->last_frame) | 
 | 		goto out;	/* Don't send tds in same frame */ | 
 | 	c67x00->last_frame = c67x00->current_frame; | 
 |  | 
 | 	/* If no urbs are scheduled, our work is done */ | 
 | 	if (!c67x00->urb_count) { | 
 | 		c67x00_ll_hpi_disable_sofeop(c67x00->sie); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	c67x00_fill_frame(c67x00); | 
 | 	if (!list_empty(&c67x00->td_list)) | 
 | 		/* TD's have been added to the frame */ | 
 | 		c67x00_send_frame(c67x00); | 
 |  | 
 |  out: | 
 | 	spin_unlock(&c67x00->lock); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- */ | 
 |  | 
 | static void c67x00_sched_tasklet(unsigned long __c67x00) | 
 | { | 
 | 	struct c67x00_hcd *c67x00 = (struct c67x00_hcd *)__c67x00; | 
 | 	c67x00_do_work(c67x00); | 
 | } | 
 |  | 
 | void c67x00_sched_kick(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	tasklet_hi_schedule(&c67x00->tasklet); | 
 | } | 
 |  | 
 | int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	tasklet_init(&c67x00->tasklet, c67x00_sched_tasklet, | 
 | 		     (unsigned long)c67x00); | 
 | 	return 0; | 
 | } | 
 |  | 
 | void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00) | 
 | { | 
 | 	tasklet_kill(&c67x00->tasklet); | 
 | } |