|  | /* | 
|  | * usbusy2y.c - ALSA USB US-428 Driver | 
|  | * | 
|  | 2005-04-14 Karsten Wiese | 
|  | Version 0.8.7.2: | 
|  | Call snd_card_free() instead of snd_card_free_in_thread() to prevent oops with dead keyboard symptom. | 
|  | Tested ok with kernel 2.6.12-rc2. | 
|  |  | 
|  | 2004-12-14 Karsten Wiese | 
|  | Version 0.8.7.1: | 
|  | snd_pcm_open for rawusb pcm-devices now returns -EBUSY if called without rawusb's hwdep device being open. | 
|  |  | 
|  | 2004-12-02 Karsten Wiese | 
|  | Version 0.8.7: | 
|  | Use macro usb_maxpacket() for portability. | 
|  |  | 
|  | 2004-10-26 Karsten Wiese | 
|  | Version 0.8.6: | 
|  | wake_up() process waiting in usX2Y_urbs_start() on error. | 
|  |  | 
|  | 2004-10-21 Karsten Wiese | 
|  | Version 0.8.5: | 
|  | nrpacks is runtime or compiletime configurable now with tested values from 1 to 4. | 
|  |  | 
|  | 2004-10-03 Karsten Wiese | 
|  | Version 0.8.2: | 
|  | Avoid any possible racing while in prepare callback. | 
|  |  | 
|  | 2004-09-30 Karsten Wiese | 
|  | Version 0.8.0: | 
|  | Simplified things and made ohci work again. | 
|  |  | 
|  | 2004-09-20 Karsten Wiese | 
|  | Version 0.7.3: | 
|  | Use usb_kill_urb() instead of deprecated (kernel 2.6.9) usb_unlink_urb(). | 
|  |  | 
|  | 2004-07-13 Karsten Wiese | 
|  | Version 0.7.1: | 
|  | Don't sleep in START/STOP callbacks anymore. | 
|  | us428 channels C/D not handled just for this version, sorry. | 
|  |  | 
|  | 2004-06-21 Karsten Wiese | 
|  | Version 0.6.4: | 
|  | Temporarely suspend midi input | 
|  | to sanely call usb_set_interface() when setting format. | 
|  |  | 
|  | 2004-06-12 Karsten Wiese | 
|  | Version 0.6.3: | 
|  | Made it thus the following rule is enforced: | 
|  | "All pcm substreams of one usX2Y have to operate at the same rate & format." | 
|  |  | 
|  | 2004-04-06 Karsten Wiese | 
|  | Version 0.6.0: | 
|  | Runs on 2.6.5 kernel without any "--with-debug=" things. | 
|  | us224 reported running. | 
|  |  | 
|  | 2004-01-14 Karsten Wiese | 
|  | Version 0.5.1: | 
|  | Runs with 2.6.1 kernel. | 
|  |  | 
|  | 2003-12-30 Karsten Wiese | 
|  | Version 0.4.1: | 
|  | Fix 24Bit 4Channel capturing for the us428. | 
|  |  | 
|  | 2003-11-27 Karsten Wiese, Martin Langer | 
|  | Version 0.4: | 
|  | us122 support. | 
|  | us224 could be tested by uncommenting the sections containing USB_ID_US224 | 
|  |  | 
|  | 2003-11-03 Karsten Wiese | 
|  | Version 0.3: | 
|  | 24Bit support. | 
|  | "arecord -D hw:1 -c 2 -r 48000 -M -f S24_3LE|aplay -D hw:1 -c 2 -r 48000 -M -f S24_3LE" works. | 
|  |  | 
|  | 2003-08-22 Karsten Wiese | 
|  | Version 0.0.8: | 
|  | Removed EZUSB Firmware. First Stage Firmwaredownload is now done by tascam-firmware downloader. | 
|  | See: | 
|  | http://usb-midi-fw.sourceforge.net/tascam-firmware.tar.gz | 
|  |  | 
|  | 2003-06-18 Karsten Wiese | 
|  | Version 0.0.5: | 
|  | changed to compile with kernel 2.4.21 and alsa 0.9.4 | 
|  |  | 
|  | 2002-10-16 Karsten Wiese | 
|  | Version 0.0.4: | 
|  | compiles again with alsa-current. | 
|  | USB_ISO_ASAP not used anymore (most of the time), instead | 
|  | urb->start_frame is calculated here now, some calls inside usb-driver don't need to happen anymore. | 
|  |  | 
|  | To get the best out of this: | 
|  | Disable APM-support in the kernel as APM-BIOS calls (once each second) hard disable interrupt for many precious milliseconds. | 
|  | This helped me much on my slowish PII 400 & PIII 500. | 
|  | ACPI yet untested but might cause the same bad behaviour. | 
|  | Use a kernel with lowlatency and preemptiv patches applied. | 
|  | To autoload snd-usb-midi append a line | 
|  | post-install snd-usb-us428 modprobe snd-usb-midi | 
|  | to /etc/modules.conf. | 
|  |  | 
|  | known problems: | 
|  | sliders, knobs, lights not yet handled except MASTER Volume slider. | 
|  | "pcm -c 2" doesn't work. "pcm -c 2 -m direct_interleaved" does. | 
|  | KDE3: "Enable full duplex operation" deadlocks. | 
|  |  | 
|  |  | 
|  | 2002-08-31 Karsten Wiese | 
|  | Version 0.0.3: audio also simplex; | 
|  | simplifying: iso urbs only 1 packet, melted structs. | 
|  | ASYNC_UNLINK not used anymore: no more crashes so far..... | 
|  | for alsa 0.9 rc3. | 
|  |  | 
|  | 2002-08-09 Karsten Wiese | 
|  | Version 0.0.2: midi works with snd-usb-midi, audio (only fullduplex now) with i.e. bristol. | 
|  | The firmware has been sniffed from win2k us-428 driver 3.09. | 
|  |  | 
|  | *   Copyright (c) 2002 - 2004 Karsten Wiese | 
|  | * | 
|  | *   This program is free software; you can redistribute it and/or modify | 
|  | *   it under the terms of the GNU General Public License as published by | 
|  | *   the Free Software Foundation; either version 2 of the License, or | 
|  | *   (at your option) any later version. | 
|  | * | 
|  | *   This program is distributed in the hope that it will be useful, | 
|  | *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *   GNU General Public License for more details. | 
|  | * | 
|  | *   You should have received a copy of the GNU General Public License | 
|  | *   along with this program; if not, write to the Free Software | 
|  | *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/usb.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/initval.h> | 
|  | #include <sound/pcm.h> | 
|  |  | 
|  | #include <sound/rawmidi.h> | 
|  | #include "usx2y.h" | 
|  | #include "usbusx2y.h" | 
|  | #include "usX2Yhwdep.h" | 
|  |  | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Karsten Wiese <annabellesgarden@yahoo.de>"); | 
|  | MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version 0.8.7.2"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_SUPPORTED_DEVICE("{{TASCAM(0x1604), "NAME_ALLCAPS"(0x8001)(0x8005)(0x8007) }}"); | 
|  |  | 
|  | static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ | 
|  | static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ | 
|  | static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ | 
|  |  | 
|  | module_param_array(index, int, NULL, 0444); | 
|  | MODULE_PARM_DESC(index, "Index value for "NAME_ALLCAPS"."); | 
|  | module_param_array(id, charp, NULL, 0444); | 
|  | MODULE_PARM_DESC(id, "ID string for "NAME_ALLCAPS"."); | 
|  | module_param_array(enable, bool, NULL, 0444); | 
|  | MODULE_PARM_DESC(enable, "Enable "NAME_ALLCAPS"."); | 
|  |  | 
|  |  | 
|  | static int snd_usX2Y_card_used[SNDRV_CARDS]; | 
|  |  | 
|  | static void usX2Y_usb_disconnect(struct usb_device* usb_device, void* ptr); | 
|  | static void snd_usX2Y_card_private_free(struct snd_card *card); | 
|  |  | 
|  | /* | 
|  | * pipe 4 is used for switching the lamps, setting samplerate, volumes .... | 
|  | */ | 
|  | static void i_usX2Y_Out04Int(struct urb *urb) | 
|  | { | 
|  | #ifdef CONFIG_SND_DEBUG | 
|  | if (urb->status) { | 
|  | int 		i; | 
|  | struct usX2Ydev *usX2Y = urb->context; | 
|  | for (i = 0; i < 10 && usX2Y->AS04.urb[i] != urb; i++); | 
|  | snd_printdd("i_usX2Y_Out04Int() urb %i status=%i\n", i, urb->status); | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void i_usX2Y_In04Int(struct urb *urb) | 
|  | { | 
|  | int			err = 0; | 
|  | struct usX2Ydev		*usX2Y = urb->context; | 
|  | struct us428ctls_sharedmem	*us428ctls = usX2Y->us428ctls_sharedmem; | 
|  |  | 
|  | usX2Y->In04IntCalls++; | 
|  |  | 
|  | if (urb->status) { | 
|  | snd_printdd("Interrupt Pipe 4 came back with status=%i\n", urb->status); | 
|  | return; | 
|  | } | 
|  |  | 
|  | //	printk("%i:0x%02X ", 8, (int)((unsigned char*)usX2Y->In04Buf)[8]); Master volume shows 0 here if fader is at max during boot ?!? | 
|  | if (us428ctls) { | 
|  | int diff = -1; | 
|  | if (-2 == us428ctls->CtlSnapShotLast) { | 
|  | diff = 0; | 
|  | memcpy(usX2Y->In04Last, usX2Y->In04Buf, sizeof(usX2Y->In04Last)); | 
|  | us428ctls->CtlSnapShotLast = -1; | 
|  | } else { | 
|  | int i; | 
|  | for (i = 0; i < 21; i++) { | 
|  | if (usX2Y->In04Last[i] != ((char*)usX2Y->In04Buf)[i]) { | 
|  | if (diff < 0) | 
|  | diff = i; | 
|  | usX2Y->In04Last[i] = ((char*)usX2Y->In04Buf)[i]; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (0 <= diff) { | 
|  | int n = us428ctls->CtlSnapShotLast + 1; | 
|  | if (n >= N_us428_ctl_BUFS  ||  n < 0) | 
|  | n = 0; | 
|  | memcpy(us428ctls->CtlSnapShot + n, usX2Y->In04Buf, sizeof(us428ctls->CtlSnapShot[0])); | 
|  | us428ctls->CtlSnapShotDiffersAt[n] = diff; | 
|  | us428ctls->CtlSnapShotLast = n; | 
|  | wake_up(&usX2Y->us428ctls_wait_queue_head); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | if (usX2Y->US04) { | 
|  | if (0 == usX2Y->US04->submitted) | 
|  | do | 
|  | err = usb_submit_urb(usX2Y->US04->urb[usX2Y->US04->submitted++], GFP_ATOMIC); | 
|  | while (!err && usX2Y->US04->submitted < usX2Y->US04->len); | 
|  | } else | 
|  | if (us428ctls && us428ctls->p4outLast >= 0 && us428ctls->p4outLast < N_us428_p4out_BUFS) { | 
|  | if (us428ctls->p4outLast != us428ctls->p4outSent) { | 
|  | int j, send = us428ctls->p4outSent + 1; | 
|  | if (send >= N_us428_p4out_BUFS) | 
|  | send = 0; | 
|  | for (j = 0; j < URBS_AsyncSeq  &&  !err; ++j) | 
|  | if (0 == usX2Y->AS04.urb[j]->status) { | 
|  | struct us428_p4out *p4out = us428ctls->p4out + send;	// FIXME if more then 1 p4out is new, 1 gets lost. | 
|  | usb_fill_bulk_urb(usX2Y->AS04.urb[j], usX2Y->chip.dev, | 
|  | usb_sndbulkpipe(usX2Y->chip.dev, 0x04), &p4out->val.vol, | 
|  | p4out->type == eLT_Light ? sizeof(struct us428_lights) : 5, | 
|  | i_usX2Y_Out04Int, usX2Y); | 
|  | err = usb_submit_urb(usX2Y->AS04.urb[j], GFP_ATOMIC); | 
|  | us428ctls->p4outSent = send; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (err) | 
|  | snd_printk(KERN_ERR "In04Int() usb_submit_urb err=%i\n", err); | 
|  |  | 
|  | urb->dev = usX2Y->chip.dev; | 
|  | usb_submit_urb(urb, GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Prepare some urbs | 
|  | */ | 
|  | int usX2Y_AsyncSeq04_init(struct usX2Ydev *usX2Y) | 
|  | { | 
|  | int	err = 0, | 
|  | i; | 
|  |  | 
|  | if (NULL == (usX2Y->AS04.buffer = kmalloc(URB_DataLen_AsyncSeq*URBS_AsyncSeq, GFP_KERNEL))) { | 
|  | err = -ENOMEM; | 
|  | } else | 
|  | for (i = 0; i < URBS_AsyncSeq; ++i) { | 
|  | if (NULL == (usX2Y->AS04.urb[i] = usb_alloc_urb(0, GFP_KERNEL))) { | 
|  | err = -ENOMEM; | 
|  | break; | 
|  | } | 
|  | usb_fill_bulk_urb(	usX2Y->AS04.urb[i], usX2Y->chip.dev, | 
|  | usb_sndbulkpipe(usX2Y->chip.dev, 0x04), | 
|  | usX2Y->AS04.buffer + URB_DataLen_AsyncSeq*i, 0, | 
|  | i_usX2Y_Out04Int, usX2Y | 
|  | ); | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int usX2Y_In04_init(struct usX2Ydev *usX2Y) | 
|  | { | 
|  | if (! (usX2Y->In04urb = usb_alloc_urb(0, GFP_KERNEL))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (! (usX2Y->In04Buf = kmalloc(21, GFP_KERNEL))) { | 
|  | usb_free_urb(usX2Y->In04urb); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | init_waitqueue_head(&usX2Y->In04WaitQueue); | 
|  | usb_fill_int_urb(usX2Y->In04urb, usX2Y->chip.dev, usb_rcvintpipe(usX2Y->chip.dev, 0x4), | 
|  | usX2Y->In04Buf, 21, | 
|  | i_usX2Y_In04Int, usX2Y, | 
|  | 10); | 
|  | return usb_submit_urb(usX2Y->In04urb, GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | static void usX2Y_unlinkSeq(struct snd_usX2Y_AsyncSeq *S) | 
|  | { | 
|  | int	i; | 
|  | for (i = 0; i < URBS_AsyncSeq; ++i) { | 
|  | if (S[i].urb) { | 
|  | usb_kill_urb(S->urb[i]); | 
|  | usb_free_urb(S->urb[i]); | 
|  | S->urb[i] = NULL; | 
|  | } | 
|  | } | 
|  | kfree(S->buffer); | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct usb_device_id snd_usX2Y_usb_id_table[] = { | 
|  | { | 
|  | .match_flags =	USB_DEVICE_ID_MATCH_DEVICE, | 
|  | .idVendor =	0x1604, | 
|  | .idProduct =	USB_ID_US428 | 
|  | }, | 
|  | { | 
|  | .match_flags =	USB_DEVICE_ID_MATCH_DEVICE, | 
|  | .idVendor =	0x1604, | 
|  | .idProduct =	USB_ID_US122 | 
|  | }, | 
|  | { | 
|  | .match_flags =	USB_DEVICE_ID_MATCH_DEVICE, | 
|  | .idVendor =	0x1604, | 
|  | .idProduct =	USB_ID_US224 | 
|  | }, | 
|  | { /* terminator */ } | 
|  | }; | 
|  |  | 
|  | static struct snd_card *usX2Y_create_card(struct usb_device *device) | 
|  | { | 
|  | int		dev; | 
|  | struct snd_card *	card; | 
|  | for (dev = 0; dev < SNDRV_CARDS; ++dev) | 
|  | if (enable[dev] && !snd_usX2Y_card_used[dev]) | 
|  | break; | 
|  | if (dev >= SNDRV_CARDS) | 
|  | return NULL; | 
|  | card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct usX2Ydev)); | 
|  | if (!card) | 
|  | return NULL; | 
|  | snd_usX2Y_card_used[usX2Y(card)->chip.index = dev] = 1; | 
|  | card->private_free = snd_usX2Y_card_private_free; | 
|  | usX2Y(card)->chip.dev = device; | 
|  | usX2Y(card)->chip.card = card; | 
|  | init_waitqueue_head(&usX2Y(card)->prepare_wait_queue); | 
|  | mutex_init(&usX2Y(card)->prepare_mutex); | 
|  | INIT_LIST_HEAD(&usX2Y(card)->chip.midi_list); | 
|  | strcpy(card->driver, "USB "NAME_ALLCAPS""); | 
|  | sprintf(card->shortname, "TASCAM "NAME_ALLCAPS""); | 
|  | sprintf(card->longname, "%s (%x:%x if %d at %03d/%03d)", | 
|  | card->shortname, | 
|  | le16_to_cpu(device->descriptor.idVendor), | 
|  | le16_to_cpu(device->descriptor.idProduct), | 
|  | 0,//us428(card)->usbmidi.ifnum, | 
|  | usX2Y(card)->chip.dev->bus->busnum, usX2Y(card)->chip.dev->devnum | 
|  | ); | 
|  | snd_card_set_dev(card, &device->dev); | 
|  | return card; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void *usX2Y_usb_probe(struct usb_device *device, struct usb_interface *intf, const struct usb_device_id *device_id) | 
|  | { | 
|  | int		err; | 
|  | struct snd_card *	card; | 
|  | if (le16_to_cpu(device->descriptor.idVendor) != 0x1604 || | 
|  | (le16_to_cpu(device->descriptor.idProduct) != USB_ID_US122 && | 
|  | le16_to_cpu(device->descriptor.idProduct) != USB_ID_US224 && | 
|  | le16_to_cpu(device->descriptor.idProduct) != USB_ID_US428) || | 
|  | !(card = usX2Y_create_card(device))) | 
|  | return NULL; | 
|  | if ((err = usX2Y_hwdep_new(card, device)) < 0  || | 
|  | (err = snd_card_register(card)) < 0) { | 
|  | snd_card_free(card); | 
|  | return NULL; | 
|  | } | 
|  | return card; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * new 2.5 USB kernel API | 
|  | */ | 
|  | static int snd_usX2Y_probe(struct usb_interface *intf, const struct usb_device_id *id) | 
|  | { | 
|  | void *chip; | 
|  | chip = usX2Y_usb_probe(interface_to_usbdev(intf), intf, id); | 
|  | if (chip) { | 
|  | dev_set_drvdata(&intf->dev, chip); | 
|  | return 0; | 
|  | } else | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | static void snd_usX2Y_disconnect(struct usb_interface *intf) | 
|  | { | 
|  | usX2Y_usb_disconnect(interface_to_usbdev(intf), | 
|  | dev_get_drvdata(&intf->dev)); | 
|  | } | 
|  |  | 
|  | MODULE_DEVICE_TABLE(usb, snd_usX2Y_usb_id_table); | 
|  | static struct usb_driver snd_usX2Y_usb_driver = { | 
|  | .name =		"snd-usb-usx2y", | 
|  | .probe =	snd_usX2Y_probe, | 
|  | .disconnect =	snd_usX2Y_disconnect, | 
|  | .id_table =	snd_usX2Y_usb_id_table, | 
|  | }; | 
|  |  | 
|  | static void snd_usX2Y_card_private_free(struct snd_card *card) | 
|  | { | 
|  | kfree(usX2Y(card)->In04Buf); | 
|  | usb_free_urb(usX2Y(card)->In04urb); | 
|  | if (usX2Y(card)->us428ctls_sharedmem) | 
|  | snd_free_pages(usX2Y(card)->us428ctls_sharedmem, sizeof(*usX2Y(card)->us428ctls_sharedmem)); | 
|  | if (usX2Y(card)->chip.index >= 0  &&  usX2Y(card)->chip.index < SNDRV_CARDS) | 
|  | snd_usX2Y_card_used[usX2Y(card)->chip.index] = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Frees the device. | 
|  | */ | 
|  | static void usX2Y_usb_disconnect(struct usb_device *device, void* ptr) | 
|  | { | 
|  | if (ptr) { | 
|  | struct snd_card *card = ptr; | 
|  | struct usX2Ydev *usX2Y = usX2Y(card); | 
|  | struct list_head *p; | 
|  | usX2Y->chip.shutdown = 1; | 
|  | usX2Y->chip_status = USX2Y_STAT_CHIP_HUP; | 
|  | usX2Y_unlinkSeq(&usX2Y->AS04); | 
|  | usb_kill_urb(usX2Y->In04urb); | 
|  | snd_card_disconnect(card); | 
|  | /* release the midi resources */ | 
|  | list_for_each(p, &usX2Y->chip.midi_list) { | 
|  | snd_usbmidi_disconnect(p); | 
|  | } | 
|  | if (usX2Y->us428ctls_sharedmem) | 
|  | wake_up(&usX2Y->us428ctls_wait_queue_head); | 
|  | snd_card_free(card); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __init snd_usX2Y_module_init(void) | 
|  | { | 
|  | return usb_register(&snd_usX2Y_usb_driver); | 
|  | } | 
|  |  | 
|  | static void __exit snd_usX2Y_module_exit(void) | 
|  | { | 
|  | usb_deregister(&snd_usX2Y_usb_driver); | 
|  | } | 
|  |  | 
|  | module_init(snd_usX2Y_module_init) | 
|  | module_exit(snd_usX2Y_module_exit) |