iwlegacy: s/S_RF_KILL_HW/S_RFKILL/g
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
index ee91ab2..0ccc934 100644
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -809,16 +809,16 @@
_il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
if (flags & HW_CARD_DISABLED)
- set_bit(S_RF_KILL_HW, &il->status);
+ set_bit(S_RFKILL, &il->status);
else
- clear_bit(S_RF_KILL_HW, &il->status);
+ clear_bit(S_RFKILL, &il->status);
il_scan_cancel(il);
- if ((test_bit(S_RF_KILL_HW, &status) !=
- test_bit(S_RF_KILL_HW, &il->status)))
+ if ((test_bit(S_RFKILL, &status) !=
+ test_bit(S_RFKILL, &il->status)))
wiphy_rfkill_set_hw_state(il->hw->wiphy,
- test_bit(S_RF_KILL_HW, &il->status));
+ test_bit(S_RFKILL, &il->status));
else
wake_up(&il->wait_command_queue);
}
@@ -2166,7 +2166,7 @@
D_INFO("RFKILL status: 0x%x\n", rfkill);
if (rfkill & 0x1) {
- clear_bit(S_RF_KILL_HW, &il->status);
+ clear_bit(S_RFKILL, &il->status);
/* if RFKILL is not on, then wait for thermal
* sensor in adapter to kick in */
while (il3945_hw_get_temperature(il) == 0) {
@@ -2178,7 +2178,7 @@
D_INFO("Thermal calibration took %dus\n",
thermal_spin * 10);
} else
- set_bit(S_RF_KILL_HW, &il->status);
+ set_bit(S_RFKILL, &il->status);
/* After the ALIVE response, we can send commands to 3945 uCode */
set_bit(S_ALIVE, &il->status);
@@ -2272,7 +2272,7 @@
* clear all bits but the RF Kill bits and return */
if (!il_is_init(il)) {
il->status =
- test_bit(S_RF_KILL_HW, &il->status) << S_RF_KILL_HW |
+ test_bit(S_RFKILL, &il->status) << S_RFKILL |
test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
goto exit;
@@ -2281,7 +2281,7 @@
/* ...otherwise clear out all the status bits but the RF Kill
* bit and continue taking the NIC down. */
il->status &=
- test_bit(S_RF_KILL_HW, &il->status) << S_RF_KILL_HW |
+ test_bit(S_RFKILL, &il->status) << S_RFKILL |
test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
@@ -2371,9 +2371,9 @@
/* If platform's RF_KILL switch is NOT set to KILL */
if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(S_RF_KILL_HW, &il->status);
+ clear_bit(S_RFKILL, &il->status);
else {
- set_bit(S_RF_KILL_HW, &il->status);
+ set_bit(S_RFKILL, &il->status);
IL_WARN("Radio disabled by HW RF Kill switch\n");
return -ENODEV;
}
@@ -2405,7 +2405,7 @@
il->ucode_data.len);
/* We return success when we resume from suspend and rf_kill is on. */
- if (test_bit(S_RF_KILL_HW, &il->status))
+ if (test_bit(S_RFKILL, &il->status))
return 0;
for (i = 0; i < MAX_HW_RESTARTS; i++) {
@@ -2485,15 +2485,15 @@
{
struct il_priv *il =
container_of(data, struct il_priv, _3945.rfkill_poll.work);
- bool old_rfkill = test_bit(S_RF_KILL_HW, &il->status);
+ bool old_rfkill = test_bit(S_RFKILL, &il->status);
bool new_rfkill =
!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
if (new_rfkill != old_rfkill) {
if (new_rfkill)
- set_bit(S_RF_KILL_HW, &il->status);
+ set_bit(S_RFKILL, &il->status);
else
- clear_bit(S_RF_KILL_HW, &il->status);
+ clear_bit(S_RFKILL, &il->status);
wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);