at91: switch to CLKDEV_LOOKUP
we do not change the clock naming convention so does not need to switch
the AVR32 yet
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 761559e..a0ba475 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -644,15 +644,7 @@
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
platform_device_register(&at91rm9200_tcb0_device);
-
- at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
- at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
- at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
platform_device_register(&at91rm9200_tcb1_device);
}
#else
@@ -849,17 +841,14 @@
case AT91RM9200_ID_SSC0:
pdev = &at91rm9200_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
break;
case AT91RM9200_ID_SSC1:
pdev = &at91rm9200_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
break;
case AT91RM9200_ID_SSC2:
pdev = &at91rm9200_ssc2_device;
configure_ssc2_pins(pins);
- at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
break;
default:
return;
@@ -1115,27 +1104,22 @@
case 0: /* DBGU */
pdev = &at91rm9200_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US0:
pdev = &at91rm9200_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US1:
pdev = &at91rm9200_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US2:
pdev = &at91rm9200_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US3:
pdev = &at91rm9200_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
default:
return;
@@ -1149,8 +1133,10 @@
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91rm9200_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)