ARM: dts: imx: use nodes label in board dts
Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi. Thus, the board
dts files become easier to read and edit with the least indentation
levels.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index b007553..05cc562 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -21,200 +21,6 @@
reg = <0x70000000 0x40000000>;
};
- soc {
- aips@50000000 { /* AIPS1 */
- spba@50000000 {
- esdhc@50004000 { /* ESDHC1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio3 13 0>;
- status = "okay";
- };
-
- ssi2: ssi@50014000 {
- fsl,mode = "i2s-slave";
- status = "okay";
- };
-
- esdhc@50020000 { /* ESDHC3 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- status = "okay";
- };
- };
-
- iomuxc@53fa8000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
- 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
- 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
- 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
- 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
- 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
- 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
- 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
- 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
- >;
- };
-
- led_pin_gpio7_7: led_gpio7_7@0 {
- fsl,pins = <
- 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
- >;
- };
- };
-
- };
-
- uart1: serial@53fbc000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
- };
- };
-
- aips@60000000 { /* AIPS2 */
- i2c@63fc4000 { /* I2C2 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- VDDA-supply = <®_3p2v>;
- VDDIO-supply = <®_3p2v>;
- };
- };
-
- i2c@63fc8000 { /* I2C1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
- };
-
- pmic: dialog@48 {
- compatible = "dlg,da9053-aa", "dlg,da9052";
- reg = <0x48>;
- interrupt-parent = <&gpio7>;
- interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
-
- regulators {
- buck1_reg: buck1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <2075000>;
- regulator-always-on;
- };
-
- buck2_reg: buck2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <2075000>;
- regulator-always-on;
- };
-
- buck3_reg: buck3 {
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- buck4_reg: buck4 {
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- ldo1_reg: ldo1 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ldo2 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo3_reg: ldo3 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: ldo4 {
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo5_reg: ldo5 {
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo6_reg: ldo6 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo7_reg: ldo7 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo8_reg: ldo8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo9_reg: ldo9 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo10_reg: ldo10 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <3650000>;
- regulator-always-on;
- };
- };
- };
- };
-
- audmux@63fd0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
- };
-
- ethernet@63fec000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -276,3 +82,189 @@
mux-ext-port = <5>;
};
};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
+ cd-gpios = <&gpio3 13 0>;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
+ cd-gpios = <&gpio3 11 0>;
+ wp-gpios = <&gpio3 12 0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+ 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
+ >;
+ };
+
+ led_pin_gpio7_7: led_gpio7_7@0 {
+ fsl,pins = <
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
+
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p2v>;
+ VDDIO-supply = <®_3p2v>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dlg,da9053-aa", "dlg,da9052";
+ reg = <0x48>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: buck4 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3650000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};