USB: OHCI: make ohci-pci a separate driver
This patch splits the PCI portion of ohci-hcd out into its
own separate driver module, called ohci-pci.
The major point of difficulty lies in ohci-pci's many vendor- and
device-specific workarounds. Some of them have to be applied before
calling ohci_start() some after, which necessitates a fair amount of
code motion. The other platform drivers require much smaller changes.
The complete sb800_prefetch() function moved to ohci-q.c,because its
only related to ohci-pci driver.
USB_OHCI_HCD_PCI symbol no longer dependence on STB03xxx, PPC_MPC52xx and
USB_OHCI_HCD_PPC_OF that's what removed.
V2:
- few specific content of pci related code in ohci_pci_start function has been moved to ohci_pci_reset
and rest of the generic code is written in ohci_start of ohci-hcd.c file.
V3:
- ohci_restart() has been called in ohci_pci_reset() function for to reset the ohci pci.
V4:
-sb800_prefetch() moved to ohci-q.c,because its only related to ohci-pci.
-no longer _creating_ CONFIG_USB_OHCI_PCI,creating CONFIG_USB_OHCI_HCD_PCI.
-overrides renamed with pci_override,its giving proper meaning.
V5:
-sb800_prefetch() moved to pci-quirks.c,because its only related to pci.
V6:
-sb800_prefetch() function has been moved to pci-quirks.c made as separate patch in 2/3.
-Most of the generic ohci pci changes moved in 2/3 patch,now this is complete ohci-pci separation patch.
V7:
-Unrelated include file has been removed from ohci.h file.
V8:
-USB_OHCI_HCD_PCI symbol does not dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index c3fa936..08613e2 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -14,12 +14,19 @@
* This file is licenced under the GPL.
*/
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue. CONFIG_PCI must be defined."
-#endif
-
-#include <linux/pci.h>
#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "OHCI PCI platform driver"
+
+static const char hcd_name[] = "ohci-pci";
/*-------------------------------------------------------------------------*/
@@ -229,10 +236,10 @@
static int ohci_pci_reset (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int ret = 0;
if (hcd->self.controller) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
const struct pci_device_id *quirk_id;
quirk_id = pci_match_id(ohci_pci_quirks, pdev);
@@ -242,94 +249,25 @@
ret = quirk(hcd);
}
}
- if (ret == 0) {
- ohci_hcd_init (ohci);
- return ohci_init (ohci);
- }
+
+ if (ret == 0)
+ ret = ohci_setup(hcd);
+ /*
+ * After ohci setup RWC may not be set for add-in PCI cards.
+ * This transfers PCI PM wakeup capabilities.
+ */
+ if (device_can_wakeup(&pdev->dev))
+ ohci->hc_control |= OHCI_CTRL_RWC;
return ret;
}
+static struct hc_driver __read_mostly ohci_pci_hc_driver;
-static int ohci_pci_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
-#ifdef CONFIG_PM /* avoid warnings about unused pdev */
- if (hcd->self.controller) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-
- /* RWC may not be set for add-in PCI cards, since boot
- * firmware probably ignored them. This transfers PCI
- * PM wakeup capabilities.
- */
- if (device_can_wakeup(&pdev->dev))
- ohci->hc_control |= OHCI_CTRL_RWC;
- }
-#endif /* CONFIG_PM */
-
- ret = ohci_run (ohci);
- if (ret < 0) {
- ohci_err (ohci, "can't start\n");
- ohci_stop (hcd);
- }
- return ret;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_pci_hc_driver = {
- .description = hcd_name,
- .product_desc = "OHCI Host Controller",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
-
- /*
- * basic lifecycle operations
- */
+static const struct ohci_driver_overrides pci_overrides __initconst = {
+ .product_desc = "OHCI PCI host controller",
.reset = ohci_pci_reset,
- .start = ohci_pci_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
-#ifdef CONFIG_PM
- .pci_suspend = ohci_suspend,
- .pci_resume = ohci_resume,
-#endif
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
};
-/*-------------------------------------------------------------------------*/
-
-
static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
@@ -357,3 +295,24 @@
},
#endif
};
+
+static int __init ohci_pci_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides);
+ return pci_register_driver(&ohci_pci_driver);
+}
+module_init(ohci_pci_init);
+
+static void __exit ohci_pci_cleanup(void)
+{
+ pci_unregister_driver(&ohci_pci_driver);
+}
+module_exit(ohci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");