ARC: Boot #1: low-level, setup_arch(), /proc/cpuinfo, mem init
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
new file mode 100644
index 0000000..e63f6a4
--- /dev/null
+++ b/arch/arc/kernel/head.S
@@ -0,0 +1,78 @@
+/*
+ * ARC CPU startup Code
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: Dec 2007
+ * -Check if we are running on Simulator or on real hardware
+ * to skip certain things during boot on simulator
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+#include <linux/linkage.h>
+#include <asm/arcregs.h>
+
+ .cpu A7
+
+ .section .init.text, "ax",@progbits
+ .type stext, @function
+ .globl stext
+stext:
+ ;-------------------------------------------------------------------
+ ; Don't clobber r0-r4 yet. It might have bootloader provided info
+ ;-------------------------------------------------------------------
+
+ ; Clear BSS before updating any globals
+ ; XXX: use ZOL here
+ mov r5, __bss_start
+ mov r6, __bss_stop
+1:
+ st.ab 0, [r5,4]
+ brlt r5, r6, 1b
+
+#ifdef CONFIG_CMDLINE_UBOOT
+ ; support for bootloader provided cmdline
+ ; If cmdline passed by u-boot, then
+ ; r0 = 1 (because ATAGS parsing, now retired, used to use 0)
+ ; r1 = magic number (board identity)
+ ; r2 = addr of cmdline string (somewhere in memory/flash)
+
+ brne r0, 1, .Lother_bootup_chores ; u-boot didn't pass cmdline
+ breq r2, 0, .Lother_bootup_chores ; or cmdline is NULL
+
+ mov r5, @command_line
+1:
+ ldb.ab r6, [r2, 1]
+ breq r6, 0, .Lother_bootup_chores
+ b.d 1b
+ stb.ab r6, [r5, 1]
+#endif
+
+.Lother_bootup_chores:
+
+ ; Identify if running on ISS vs Silicon
+ ; IDENTITY Reg [ 3 2 1 0 ]
+ ; (chip-id) ^^^^^ ==> 0xffff for ISS
+ lr r0, [identity]
+ lsr r3, r0, 16
+ cmp r3, 0xffff
+ mov.z r4, 0
+ mov.nz r4, 1
+ st r4, [@running_on_hw]
+
+ ; setup "current" tsk and optionally cache it in dedicated r25
+ mov r9, @init_task
+ SET_CURR_TASK_ON_CPU r9, r0 ; r9 = tsk, r0 = scratch
+
+ ; setup stack (fp, sp)
+ mov fp, 0
+
+ ; tsk->thread_info is really a PAGE, whose bottom hoists stack
+ GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output)
+
+ j start_kernel ; "C" entry point
diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c
new file mode 100644
index 0000000..e227a2b
--- /dev/null
+++ b/arch/arc/kernel/reset.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/reboot.h>
+#include <linux/pm.h>
+
+void machine_halt(void)
+{
+ /* Halt the processor */
+ __asm__ __volatile__("flag 1\n");
+}
+
+void machine_restart(char *__unused)
+{
+ /* Soft reset : jump to reset vector */
+ pr_info("Put your restart handler here\n");
+ machine_halt();
+}
+
+void machine_power_off(void)
+{
+ /* FIXME :: power off ??? */
+ machine_halt();
+}
+
+void (*pm_power_off) (void) = NULL;
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
new file mode 100644
index 0000000..82ac206
--- /dev/null
+++ b/arch/arc/kernel/setup.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/root_dev.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/cpu.h>
+#include <asm/arcregs.h>
+#include <asm/tlb.h>
+#include <asm/cache.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/irq.h>
+#include <asm/arcregs.h>
+
+#define FIX_PTR(x) __asm__ __volatile__(";" : "+r"(x))
+
+int running_on_hw = 1; /* vs. on ISS */
+
+char __initdata command_line[COMMAND_LINE_SIZE];
+
+struct task_struct *_current_task[NR_CPUS]; /* For stack switching */
+
+struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
+
+void __init read_arc_build_cfg_regs(void)
+{
+ read_decode_mmu_bcr();
+ read_decode_cache_bcr();
+}
+
+/*
+ * Initialize and setup the processor core
+ * This is called by all the CPUs thus should not do special case stuff
+ * such as only for boot CPU etc
+ */
+
+void __init setup_processor(void)
+{
+ read_arc_build_cfg_regs();
+ arc_init_IRQ();
+ arc_mmu_init();
+ arc_cache_init();
+}
+
+void __init __attribute__((weak)) arc_platform_early_init(void)
+{
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+#ifdef CONFIG_CMDLINE_UBOOT
+ /* Make sure that a whitespace is inserted before */
+ strlcat(command_line, " ", sizeof(command_line));
+#endif
+ /*
+ * Append .config cmdline to base command line, which might already
+ * contain u-boot "bootargs" (handled by head.S, if so configured)
+ */
+ strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
+
+ /* Save unparsed command line copy for /proc/cmdline */
+ strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
+
+ /* To force early parsing of things like mem=xxx */
+ parse_early_param();
+
+ /* Platform/board specific: e.g. early console registration */
+ arc_platform_early_init();
+
+ setup_processor();
+
+ setup_arch_memory();
+
+ /* Can be issue if someone passes cmd line arg "ro"
+ * But that is unlikely so keeping it as it is
+ */
+ root_mountflags &= ~MS_RDONLY;
+
+ console_verbose();
+
+#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+
+}
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+
+#define cpu_to_ptr(c) ((void *)(0xFFFF0000 | (unsigned int)(c)))
+#define ptr_to_cpu(p) (~0xFFFF0000UL & (unsigned int)(p))
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ char *str;
+ int cpu_id = ptr_to_cpu(v);
+
+ str = (char *)__get_free_page(GFP_TEMPORARY);
+ if (!str)
+ goto done;
+
+ seq_printf(m, "ARC700 #%d\n", cpu_id);
+
+ seq_printf(m, "Bogo MIPS : \t%lu.%02lu\n",
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100);
+
+ free_page((unsigned long)str);
+done:
+ seq_printf(m, "\n\n");
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ /*
+ * Callback returns cpu-id to iterator for show routine, NULL to stop.
+ * However since NULL is also a valid cpu-id (0), we use a round-about
+ * way to pass it w/o having to kmalloc/free a 2 byte string.
+ * Encode cpu-id as 0xFFcccc, which is decoded by show routine.
+ */
+ return *pos < num_possible_cpus() ? cpu_to_ptr(*pos) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo
+};
+
+static DEFINE_PER_CPU(struct cpu, cpu_topology);
+
+static int __init topology_init(void)
+{
+ int cpu;
+
+ for_each_present_cpu(cpu)
+ register_cpu(&per_cpu(cpu_topology, cpu), cpu);
+
+ return 0;
+}
+
+subsys_initcall(topology_init);