drm/radeon/audio: set up the sads on DCE3.2 asics

This sets up the short audio descriptors properly on
DCE3.2 asics for hdmi audio.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 44ec7a1..454f90a 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -967,6 +967,35 @@
 #define		HDMI_CONNECTION				(1 << 16)
 #define		DP_CONNECTION				(1 << 17)
 
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR0        0x71c8 /* LPCM */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR1        0x71cc /* AC3 */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR2        0x71d0 /* MPEG1 */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR3        0x71d4 /* MP3 */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR4        0x71d8 /* MPEG2 */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR5        0x71dc /* AAC */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR6        0x71e0 /* DTS */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR7        0x71e4 /* ATRAC */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR8        0x71e8 /* one bit audio - leave at 0 (default) */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR9        0x71ec /* Dolby Digital */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR10       0x71f0 /* DTS-HD */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR11       0x71f4 /* MAT-MLP */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR12       0x71f8 /* DTS */
+#define AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR13       0x71fc /* WMA Pro */
+#       define MAX_CHANNELS(x)                            (((x) & 0x7) << 0)
+/* max channels minus one.  7 = 8 channels */
+#       define SUPPORTED_FREQUENCIES(x)                   (((x) & 0xff) << 8)
+#       define DESCRIPTOR_BYTE_2(x)                       (((x) & 0xff) << 16)
+#       define SUPPORTED_FREQUENCIES_STEREO(x)            (((x) & 0xff) << 24) /* LPCM only */
+/* SUPPORTED_FREQUENCIES, SUPPORTED_FREQUENCIES_STEREO
+ * bit0 = 32 kHz
+ * bit1 = 44.1 kHz
+ * bit2 = 48 kHz
+ * bit3 = 88.2 kHz
+ * bit4 = 96 kHz
+ * bit5 = 176.4 kHz
+ * bit6 = 192 kHz
+ */
+
 /* rs6xx/rs740 and r6xx share the same HDMI blocks, however, rs6xx has only one
  * instance of the blocks while r6xx has 2.  DCE 3.0 cards are slightly
  * different due to the new DIG blocks, but also have 2 instances.