diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 1df3bd9..9e56c39 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -492,19 +492,19 @@
 	  will be called i2c-via.
 
 config I2C_VIAPRO
-	tristate "VIA 82C596/82C686/823x"
+	tristate "VIA 82C596/82C686/82xx"
 	depends on I2C && PCI
 	help
 	  If you say yes to this option, support will be included for the VIA
-	  82C596/82C686/823x I2C interfaces.  Specifically, the following 
+	  82C596/82C686/82xx I2C interfaces.  Specifically, the following
 	  chipsets are supported:
-	  82C596A/B
-	  82C686A/B
-	  8231
-	  8233
-	  8233A
-	  8235
-	  8237
+	    VT82C596A/B
+	    VT82C686A/B
+	    VT8231
+	    VT8233/A
+	    VT8235
+	    VT8237R/A
+	    VT8251
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 47e52bf..1ccc0fb 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -34,6 +34,8 @@
    VT8233A            0x3147             yes?
    VT8235             0x3177             yes
    VT8237R            0x3227             yes
+   VT8237A            0x3337             yes
+   VT8251             0x3287             yes
 
    Note: we assume there can only be one device, with one SMBus interface.
 */
@@ -381,7 +383,9 @@
 	dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
 
 	switch (pdev->device) {
+	case PCI_DEVICE_ID_VIA_8251:
 	case PCI_DEVICE_ID_VIA_8237:
+	case PCI_DEVICE_ID_VIA_8237A:
 	case PCI_DEVICE_ID_VIA_8235:
 	case PCI_DEVICE_ID_VIA_8233A:
 	case PCI_DEVICE_ID_VIA_8233_0:
@@ -432,8 +436,12 @@
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237),
 	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A),
+	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4),
 	  .driver_data = SMBBA1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251),
+	  .driver_data = SMBBA3 },
 	{ 0, }
 };