|  | /* Various workarounds for chipset bugs. | 
|  | This code runs very early and can't use the regular PCI subsystem | 
|  | The entries are keyed to PCI bridges which usually identify chipsets | 
|  | uniquely. | 
|  | This is only for whole classes of chipsets with specific problems which | 
|  | need early invasive action (e.g. before the timers are initialized). | 
|  | Most PCI device specific workarounds can be done later and should be | 
|  | in standard PCI quirks | 
|  | Mainboard specific bugs should be handled by DMI entries. | 
|  | CPU specific bugs in setup.c */ | 
|  |  | 
|  | #include <linux/pci.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/pci_ids.h> | 
|  | #include <asm/pci-direct.h> | 
|  | #include <asm/dma.h> | 
|  | #include <asm/io_apic.h> | 
|  | #include <asm/apic.h> | 
|  | #include <asm/iommu.h> | 
|  |  | 
|  | static void __init fix_hypertransport_config(int num, int slot, int func) | 
|  | { | 
|  | u32 htcfg; | 
|  | /* | 
|  | * we found a hypertransport bus | 
|  | * make sure that we are broadcasting | 
|  | * interrupts to all cpus on the ht bus | 
|  | * if we're using extended apic ids | 
|  | */ | 
|  | htcfg = read_pci_config(num, slot, func, 0x68); | 
|  | if (htcfg & (1 << 18)) { | 
|  | printk(KERN_INFO "Detected use of extended apic ids " | 
|  | "on hypertransport bus\n"); | 
|  | if ((htcfg & (1 << 17)) == 0) { | 
|  | printk(KERN_INFO "Enabling hypertransport extended " | 
|  | "apic interrupt broadcast\n"); | 
|  | printk(KERN_INFO "Note this is a bios bug, " | 
|  | "please contact your hw vendor\n"); | 
|  | htcfg |= (1 << 17); | 
|  | write_pci_config(num, slot, func, 0x68, htcfg); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | } | 
|  |  | 
|  | static void __init via_bugs(int  num, int slot, int func) | 
|  | { | 
|  | #ifdef CONFIG_GART_IOMMU | 
|  | if ((max_pfn > MAX_DMA32_PFN ||  force_iommu) && | 
|  | !gart_iommu_aperture_allowed) { | 
|  | printk(KERN_INFO | 
|  | "Looks like a VIA chipset. Disabling IOMMU." | 
|  | " Override with iommu=allowed\n"); | 
|  | gart_iommu_aperture_disabled = 1; | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_ACPI | 
|  | #ifdef CONFIG_X86_IO_APIC | 
|  |  | 
|  | static int __init nvidia_hpet_check(struct acpi_table_header *header) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_X86_IO_APIC */ | 
|  | #endif /* CONFIG_ACPI */ | 
|  |  | 
|  | static void __init nvidia_bugs(int num, int slot, int func) | 
|  | { | 
|  | #ifdef CONFIG_ACPI | 
|  | #ifdef CONFIG_X86_IO_APIC | 
|  | /* | 
|  | * All timer overrides on Nvidia are | 
|  | * wrong unless HPET is enabled. | 
|  | * Unfortunately that's not true on many Asus boards. | 
|  | * We don't know yet how to detect this automatically, but | 
|  | * at least allow a command line override. | 
|  | */ | 
|  | if (acpi_use_timer_override) | 
|  | return; | 
|  |  | 
|  | if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) { | 
|  | acpi_skip_timer_override = 1; | 
|  | printk(KERN_INFO "Nvidia board " | 
|  | "detected. Ignoring ACPI " | 
|  | "timer override.\n"); | 
|  | printk(KERN_INFO "If you got timer trouble " | 
|  | "try acpi_use_timer_override\n"); | 
|  | } | 
|  | #endif | 
|  | #endif | 
|  | /* RED-PEN skip them on mptables too? */ | 
|  |  | 
|  | } | 
|  |  | 
|  | #define QFLAG_APPLY_ONCE 	0x1 | 
|  | #define QFLAG_APPLIED		0x2 | 
|  | #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED) | 
|  | struct chipset { | 
|  | u32 vendor; | 
|  | u32 device; | 
|  | u32 class; | 
|  | u32 class_mask; | 
|  | u32 flags; | 
|  | void (*f)(int num, int slot, int func); | 
|  | }; | 
|  |  | 
|  | static struct chipset early_qrk[] __initdata = { | 
|  | { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, | 
|  | PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, | 
|  | { PCI_VENDOR_ID_VIA, PCI_ANY_ID, | 
|  | PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, | 
|  | { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, | 
|  | PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * check_dev_quirk - apply early quirks to a given PCI device | 
|  | * @num: bus number | 
|  | * @slot: slot number | 
|  | * @func: PCI function | 
|  | * | 
|  | * Check the vendor & device ID against the early quirks table. | 
|  | * | 
|  | * If the device is single function, let early_quirks() know so we don't | 
|  | * poke at this device again. | 
|  | */ | 
|  | static int __init check_dev_quirk(int num, int slot, int func) | 
|  | { | 
|  | u16 class; | 
|  | u16 vendor; | 
|  | u16 device; | 
|  | u8 type; | 
|  | int i; | 
|  |  | 
|  | class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE); | 
|  |  | 
|  | if (class == 0xffff) | 
|  | return -1; /* no class, treat as single function */ | 
|  |  | 
|  | vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID); | 
|  |  | 
|  | device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID); | 
|  |  | 
|  | for (i = 0; early_qrk[i].f != NULL; i++) { | 
|  | if (((early_qrk[i].vendor == PCI_ANY_ID) || | 
|  | (early_qrk[i].vendor == vendor)) && | 
|  | ((early_qrk[i].device == PCI_ANY_ID) || | 
|  | (early_qrk[i].device == device)) && | 
|  | (!((early_qrk[i].class ^ class) & | 
|  | early_qrk[i].class_mask))) { | 
|  | if ((early_qrk[i].flags & | 
|  | QFLAG_DONE) != QFLAG_DONE) | 
|  | early_qrk[i].f(num, slot, func); | 
|  | early_qrk[i].flags |= QFLAG_APPLIED; | 
|  | } | 
|  | } | 
|  |  | 
|  | type = read_pci_config_byte(num, slot, func, | 
|  | PCI_HEADER_TYPE); | 
|  | if (!(type & 0x80)) | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void __init early_quirks(void) | 
|  | { | 
|  | int num, slot, func; | 
|  |  | 
|  | if (!early_pci_allowed()) | 
|  | return; | 
|  |  | 
|  | /* Poor man's PCI discovery */ | 
|  | for (num = 0; num < 32; num++) | 
|  | for (slot = 0; slot < 32; slot++) | 
|  | for (func = 0; func < 8; func++) { | 
|  | /* Only probe function 0 on single fn devices */ | 
|  | if (check_dev_quirk(num, slot, func)) | 
|  | break; | 
|  | } | 
|  | } |