|  | #include <linux/errno.h> | 
|  | #include <linux/signal.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/random.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel_stat.h> | 
|  | #include <linux/sysdev.h> | 
|  | #include <linux/bitops.h> | 
|  |  | 
|  | #include <asm/atomic.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/timer.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/delay.h> | 
|  | #include <asm/desc.h> | 
|  | #include <asm/apic.h> | 
|  | #include <asm/arch_hooks.h> | 
|  | #include <asm/i8259.h> | 
|  |  | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Note that on a 486, we don't want to do a SIGFPE on an irq13 | 
|  | * as the irq is unreliable, and exception 16 works correctly | 
|  | * (ie as explained in the intel literature). On a 386, you | 
|  | * can't use exception 16 due to bad IBM design, so we have to | 
|  | * rely on the less exact irq13. | 
|  | * | 
|  | * Careful.. Not only is IRQ13 unreliable, but it is also | 
|  | * leads to races. IBM designers who came up with it should | 
|  | * be shot. | 
|  | */ | 
|  |  | 
|  |  | 
|  | static irqreturn_t math_error_irq(int cpl, void *dev_id) | 
|  | { | 
|  | extern void math_error(void __user *); | 
|  | outb(0,0xF0); | 
|  | if (ignore_fpu_irq || !boot_cpu_data.hard_math) | 
|  | return IRQ_NONE; | 
|  | math_error((void __user *)get_irq_regs()->ip); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * New motherboards sometimes make IRQ 13 be a PCI interrupt, | 
|  | * so allow interrupt sharing. | 
|  | */ | 
|  | static struct irqaction fpu_irq = { | 
|  | .handler = math_error_irq, | 
|  | .mask = CPU_MASK_NONE, | 
|  | .name = "fpu", | 
|  | }; | 
|  |  | 
|  | void __init init_ISA_irqs (void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | #ifdef CONFIG_X86_LOCAL_APIC | 
|  | init_bsp_APIC(); | 
|  | #endif | 
|  | init_8259A(0); | 
|  |  | 
|  | /* | 
|  | * 16 old-style INTA-cycle interrupts: | 
|  | */ | 
|  | for (i = 0; i < 16; i++) { | 
|  | set_irq_chip_and_handler_name(i, &i8259A_chip, | 
|  | handle_level_irq, "XT"); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Overridden in paravirt.c */ | 
|  | void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); | 
|  |  | 
|  | void __init native_init_IRQ(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* all the set up before the call gates are initialised */ | 
|  | pre_intr_init_hook(); | 
|  |  | 
|  | /* | 
|  | * Cover the whole vector space, no vector can escape | 
|  | * us. (some of these will be overridden and become | 
|  | * 'special' SMP interrupts) | 
|  | */ | 
|  | for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { | 
|  | int vector = FIRST_EXTERNAL_VECTOR + i; | 
|  | if (i >= NR_IRQS) | 
|  | break; | 
|  | /* SYSCALL_VECTOR was reserved in trap_init. */ | 
|  | if (!test_bit(vector, used_vectors)) | 
|  | set_intr_gate(vector, interrupt[i]); | 
|  | } | 
|  |  | 
|  | /* setup after call gates are initialised (usually add in | 
|  | * the architecture specific gates) | 
|  | */ | 
|  | intr_init_hook(); | 
|  |  | 
|  | /* | 
|  | * External FPU? Set up irq13 if so, for | 
|  | * original braindamaged IBM FERR coupling. | 
|  | */ | 
|  | if (boot_cpu_data.hard_math && !cpu_has_fpu) | 
|  | setup_irq(FPU_IRQ, &fpu_irq); | 
|  |  | 
|  | irq_ctx_init(smp_processor_id()); | 
|  | } |