|  | /* | 
|  | *  linux/drivers/mmc/mmc.c | 
|  | * | 
|  | *  Copyright (C) 2003-2004 Russell King, All Rights Reserved. | 
|  | *  SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. | 
|  | *  SD support Copyright (C) 2005 Pierre Ossman, All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  | #include <linux/config.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/err.h> | 
|  | #include <asm/scatterlist.h> | 
|  | #include <linux/scatterlist.h> | 
|  |  | 
|  | #include <linux/mmc/card.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/mmc/protocol.h> | 
|  |  | 
|  | #include "mmc.h" | 
|  |  | 
|  | #ifdef CONFIG_MMC_DEBUG | 
|  | #define DBG(x...)	printk(KERN_DEBUG x) | 
|  | #else | 
|  | #define DBG(x...)	do { } while (0) | 
|  | #endif | 
|  |  | 
|  | #define CMD_RETRIES	3 | 
|  |  | 
|  | /* | 
|  | * OCR Bit positions to 10s of Vdd mV. | 
|  | */ | 
|  | static const unsigned short mmc_ocr_bit_to_vdd[] = { | 
|  | 150,	155,	160,	165,	170,	180,	190,	200, | 
|  | 210,	220,	230,	240,	250,	260,	270,	280, | 
|  | 290,	300,	310,	320,	330,	340,	350,	360 | 
|  | }; | 
|  |  | 
|  | static const unsigned int tran_exp[] = { | 
|  | 10000,		100000,		1000000,	10000000, | 
|  | 0,		0,		0,		0 | 
|  | }; | 
|  |  | 
|  | static const unsigned char tran_mant[] = { | 
|  | 0,	10,	12,	13,	15,	20,	25,	30, | 
|  | 35,	40,	45,	50,	55,	60,	70,	80, | 
|  | }; | 
|  |  | 
|  | static const unsigned int tacc_exp[] = { | 
|  | 1,	10,	100,	1000,	10000,	100000,	1000000, 10000000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int tacc_mant[] = { | 
|  | 0,	10,	12,	13,	15,	20,	25,	30, | 
|  | 35,	40,	45,	50,	55,	60,	70,	80, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /** | 
|  | *	mmc_request_done - finish processing an MMC command | 
|  | *	@host: MMC host which completed command | 
|  | *	@mrq: MMC request which completed | 
|  | * | 
|  | *	MMC drivers should call this function when they have completed | 
|  | *	their processing of a command.  This should be called before the | 
|  | *	data part of the command has completed. | 
|  | */ | 
|  | void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) | 
|  | { | 
|  | struct mmc_command *cmd = mrq->cmd; | 
|  | int err = mrq->cmd->error; | 
|  | DBG("MMC: req done (%02x): %d: %08x %08x %08x %08x\n", cmd->opcode, | 
|  | err, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); | 
|  |  | 
|  | if (err && cmd->retries) { | 
|  | cmd->retries--; | 
|  | cmd->error = 0; | 
|  | host->ops->request(host, mrq); | 
|  | } else if (mrq->done) { | 
|  | mrq->done(mrq); | 
|  | } | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_request_done); | 
|  |  | 
|  | /** | 
|  | *	mmc_start_request - start a command on a host | 
|  | *	@host: MMC host to start command on | 
|  | *	@mrq: MMC request to start | 
|  | * | 
|  | *	Queue a command on the specified host.  We expect the | 
|  | *	caller to be holding the host lock with interrupts disabled. | 
|  | */ | 
|  | void | 
|  | mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) | 
|  | { | 
|  | DBG("MMC: starting cmd %02x arg %08x flags %08x\n", | 
|  | mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags); | 
|  |  | 
|  | WARN_ON(host->card_busy == NULL); | 
|  |  | 
|  | mrq->cmd->error = 0; | 
|  | mrq->cmd->mrq = mrq; | 
|  | if (mrq->data) { | 
|  | mrq->cmd->data = mrq->data; | 
|  | mrq->data->error = 0; | 
|  | mrq->data->mrq = mrq; | 
|  | if (mrq->stop) { | 
|  | mrq->data->stop = mrq->stop; | 
|  | mrq->stop->error = 0; | 
|  | mrq->stop->mrq = mrq; | 
|  | } | 
|  | } | 
|  | host->ops->request(host, mrq); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_start_request); | 
|  |  | 
|  | static void mmc_wait_done(struct mmc_request *mrq) | 
|  | { | 
|  | complete(mrq->done_data); | 
|  | } | 
|  |  | 
|  | int mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq) | 
|  | { | 
|  | DECLARE_COMPLETION(complete); | 
|  |  | 
|  | mrq->done_data = &complete; | 
|  | mrq->done = mmc_wait_done; | 
|  |  | 
|  | mmc_start_request(host, mrq); | 
|  |  | 
|  | wait_for_completion(&complete); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_wait_for_req); | 
|  |  | 
|  | /** | 
|  | *	mmc_wait_for_cmd - start a command and wait for completion | 
|  | *	@host: MMC host to start command | 
|  | *	@cmd: MMC command to start | 
|  | *	@retries: maximum number of retries | 
|  | * | 
|  | *	Start a new MMC command for a host, and wait for the command | 
|  | *	to complete.  Return any error that occurred while the command | 
|  | *	was executing.  Do not attempt to parse the response. | 
|  | */ | 
|  | int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries) | 
|  | { | 
|  | struct mmc_request mrq; | 
|  |  | 
|  | BUG_ON(host->card_busy == NULL); | 
|  |  | 
|  | memset(&mrq, 0, sizeof(struct mmc_request)); | 
|  |  | 
|  | memset(cmd->resp, 0, sizeof(cmd->resp)); | 
|  | cmd->retries = retries; | 
|  |  | 
|  | mrq.cmd = cmd; | 
|  | cmd->data = NULL; | 
|  |  | 
|  | mmc_wait_for_req(host, &mrq); | 
|  |  | 
|  | return cmd->error; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_wait_for_cmd); | 
|  |  | 
|  | /** | 
|  | *	mmc_wait_for_app_cmd - start an application command and wait for | 
|  | completion | 
|  | *	@host: MMC host to start command | 
|  | *	@rca: RCA to send MMC_APP_CMD to | 
|  | *	@cmd: MMC command to start | 
|  | *	@retries: maximum number of retries | 
|  | * | 
|  | *	Sends a MMC_APP_CMD, checks the card response, sends the command | 
|  | *	in the parameter and waits for it to complete. Return any error | 
|  | *	that occurred while the command was executing.  Do not attempt to | 
|  | *	parse the response. | 
|  | */ | 
|  | int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca, | 
|  | struct mmc_command *cmd, int retries) | 
|  | { | 
|  | struct mmc_request mrq; | 
|  | struct mmc_command appcmd; | 
|  |  | 
|  | int i, err; | 
|  |  | 
|  | BUG_ON(host->card_busy == NULL); | 
|  | BUG_ON(retries < 0); | 
|  |  | 
|  | err = MMC_ERR_INVALID; | 
|  |  | 
|  | /* | 
|  | * We have to resend MMC_APP_CMD for each attempt so | 
|  | * we cannot use the retries field in mmc_command. | 
|  | */ | 
|  | for (i = 0;i <= retries;i++) { | 
|  | memset(&mrq, 0, sizeof(struct mmc_request)); | 
|  |  | 
|  | appcmd.opcode = MMC_APP_CMD; | 
|  | appcmd.arg = rca << 16; | 
|  | appcmd.flags = MMC_RSP_R1; | 
|  | appcmd.retries = 0; | 
|  | memset(appcmd.resp, 0, sizeof(appcmd.resp)); | 
|  | appcmd.data = NULL; | 
|  |  | 
|  | mrq.cmd = &appcmd; | 
|  | appcmd.data = NULL; | 
|  |  | 
|  | mmc_wait_for_req(host, &mrq); | 
|  |  | 
|  | if (appcmd.error) { | 
|  | err = appcmd.error; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Check that card supported application commands */ | 
|  | if (!(appcmd.resp[0] & R1_APP_CMD)) | 
|  | return MMC_ERR_FAILED; | 
|  |  | 
|  | memset(&mrq, 0, sizeof(struct mmc_request)); | 
|  |  | 
|  | memset(cmd->resp, 0, sizeof(cmd->resp)); | 
|  | cmd->retries = 0; | 
|  |  | 
|  | mrq.cmd = cmd; | 
|  | cmd->data = NULL; | 
|  |  | 
|  | mmc_wait_for_req(host, &mrq); | 
|  |  | 
|  | err = cmd->error; | 
|  | if (cmd->error == MMC_ERR_NONE) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_wait_for_app_cmd); | 
|  |  | 
|  | static int mmc_select_card(struct mmc_host *host, struct mmc_card *card); | 
|  |  | 
|  | /** | 
|  | *	__mmc_claim_host - exclusively claim a host | 
|  | *	@host: mmc host to claim | 
|  | *	@card: mmc card to claim host for | 
|  | * | 
|  | *	Claim a host for a set of operations.  If a valid card | 
|  | *	is passed and this wasn't the last card selected, select | 
|  | *	the card before returning. | 
|  | * | 
|  | *	Note: you should use mmc_card_claim_host or mmc_claim_host. | 
|  | */ | 
|  | int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card) | 
|  | { | 
|  | DECLARE_WAITQUEUE(wait, current); | 
|  | unsigned long flags; | 
|  | int err = 0; | 
|  |  | 
|  | add_wait_queue(&host->wq, &wait); | 
|  | spin_lock_irqsave(&host->lock, flags); | 
|  | while (1) { | 
|  | set_current_state(TASK_UNINTERRUPTIBLE); | 
|  | if (host->card_busy == NULL) | 
|  | break; | 
|  | spin_unlock_irqrestore(&host->lock, flags); | 
|  | schedule(); | 
|  | spin_lock_irqsave(&host->lock, flags); | 
|  | } | 
|  | set_current_state(TASK_RUNNING); | 
|  | host->card_busy = card; | 
|  | spin_unlock_irqrestore(&host->lock, flags); | 
|  | remove_wait_queue(&host->wq, &wait); | 
|  |  | 
|  | if (card != (void *)-1) { | 
|  | err = mmc_select_card(host, card); | 
|  | if (err != MMC_ERR_NONE) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(__mmc_claim_host); | 
|  |  | 
|  | /** | 
|  | *	mmc_release_host - release a host | 
|  | *	@host: mmc host to release | 
|  | * | 
|  | *	Release a MMC host, allowing others to claim the host | 
|  | *	for their operations. | 
|  | */ | 
|  | void mmc_release_host(struct mmc_host *host) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | BUG_ON(host->card_busy == NULL); | 
|  |  | 
|  | spin_lock_irqsave(&host->lock, flags); | 
|  | host->card_busy = NULL; | 
|  | spin_unlock_irqrestore(&host->lock, flags); | 
|  |  | 
|  | wake_up(&host->wq); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_release_host); | 
|  |  | 
|  | static int mmc_select_card(struct mmc_host *host, struct mmc_card *card) | 
|  | { | 
|  | int err; | 
|  | struct mmc_command cmd; | 
|  |  | 
|  | BUG_ON(host->card_busy == NULL); | 
|  |  | 
|  | if (host->card_selected == card) | 
|  | return MMC_ERR_NONE; | 
|  |  | 
|  | host->card_selected = card; | 
|  |  | 
|  | cmd.opcode = MMC_SELECT_CARD; | 
|  | cmd.arg = card->rca << 16; | 
|  | cmd.flags = MMC_RSP_R1; | 
|  |  | 
|  | err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | 
|  | if (err != MMC_ERR_NONE) | 
|  | return err; | 
|  |  | 
|  | /* | 
|  | * Default bus width is 1 bit. | 
|  | */ | 
|  | host->ios.bus_width = MMC_BUS_WIDTH_1; | 
|  |  | 
|  | /* | 
|  | * We can only change the bus width of the selected | 
|  | * card so therefore we have to put the handling | 
|  | * here. | 
|  | */ | 
|  | if (host->caps & MMC_CAP_4_BIT_DATA) { | 
|  | /* | 
|  | * The card is in 1 bit mode by default so | 
|  | * we only need to change if it supports the | 
|  | * wider version. | 
|  | */ | 
|  | if (mmc_card_sd(card) && | 
|  | (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { | 
|  | struct mmc_command cmd; | 
|  | cmd.opcode = SD_APP_SET_BUS_WIDTH; | 
|  | cmd.arg = SD_BUS_WIDTH_4; | 
|  | cmd.flags = MMC_RSP_R1; | 
|  |  | 
|  | err = mmc_wait_for_app_cmd(host, card->rca, &cmd, | 
|  | CMD_RETRIES); | 
|  | if (err != MMC_ERR_NONE) | 
|  | return err; | 
|  |  | 
|  | host->ios.bus_width = MMC_BUS_WIDTH_4; | 
|  | } | 
|  | } | 
|  |  | 
|  | host->ops->set_ios(host, &host->ios); | 
|  |  | 
|  | return MMC_ERR_NONE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Ensure that no card is selected. | 
|  | */ | 
|  | static void mmc_deselect_cards(struct mmc_host *host) | 
|  | { | 
|  | struct mmc_command cmd; | 
|  |  | 
|  | if (host->card_selected) { | 
|  | host->card_selected = NULL; | 
|  |  | 
|  | cmd.opcode = MMC_SELECT_CARD; | 
|  | cmd.arg = 0; | 
|  | cmd.flags = MMC_RSP_NONE; | 
|  |  | 
|  | mmc_wait_for_cmd(host, &cmd, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline void mmc_delay(unsigned int ms) | 
|  | { | 
|  | if (ms < HZ / 1000) { | 
|  | yield(); | 
|  | mdelay(ms); | 
|  | } else { | 
|  | msleep_interruptible (ms); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Mask off any voltages we don't support and select | 
|  | * the lowest voltage | 
|  | */ | 
|  | static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) | 
|  | { | 
|  | int bit; | 
|  |  | 
|  | ocr &= host->ocr_avail; | 
|  |  | 
|  | bit = ffs(ocr); | 
|  | if (bit) { | 
|  | bit -= 1; | 
|  |  | 
|  | ocr = 3 << bit; | 
|  |  | 
|  | host->ios.vdd = bit; | 
|  | host->ops->set_ios(host, &host->ios); | 
|  | } else { | 
|  | ocr = 0; | 
|  | } | 
|  |  | 
|  | return ocr; | 
|  | } | 
|  |  | 
|  | #define UNSTUFF_BITS(resp,start,size)					\ | 
|  | ({								\ | 
|  | const int __size = size;				\ | 
|  | const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1;	\ | 
|  | const int __off = 3 - ((start) / 32);			\ | 
|  | const int __shft = (start) & 31;			\ | 
|  | u32 __res;						\ | 
|  | \ | 
|  | __res = resp[__off] >> __shft;				\ | 
|  | if (__size + __shft > 32)				\ | 
|  | __res |= resp[__off-1] << ((32 - __shft) % 32);	\ | 
|  | __res & __mask;						\ | 
|  | }) | 
|  |  | 
|  | /* | 
|  | * Given the decoded CSD structure, decode the raw CID to our CID structure. | 
|  | */ | 
|  | static void mmc_decode_cid(struct mmc_card *card) | 
|  | { | 
|  | u32 *resp = card->raw_cid; | 
|  |  | 
|  | memset(&card->cid, 0, sizeof(struct mmc_cid)); | 
|  |  | 
|  | if (mmc_card_sd(card)) { | 
|  | /* | 
|  | * SD doesn't currently have a version field so we will | 
|  | * have to assume we can parse this. | 
|  | */ | 
|  | card->cid.manfid		= UNSTUFF_BITS(resp, 120, 8); | 
|  | card->cid.oemid			= UNSTUFF_BITS(resp, 104, 16); | 
|  | card->cid.prod_name[0]		= UNSTUFF_BITS(resp, 96, 8); | 
|  | card->cid.prod_name[1]		= UNSTUFF_BITS(resp, 88, 8); | 
|  | card->cid.prod_name[2]		= UNSTUFF_BITS(resp, 80, 8); | 
|  | card->cid.prod_name[3]		= UNSTUFF_BITS(resp, 72, 8); | 
|  | card->cid.prod_name[4]		= UNSTUFF_BITS(resp, 64, 8); | 
|  | card->cid.hwrev			= UNSTUFF_BITS(resp, 60, 4); | 
|  | card->cid.fwrev			= UNSTUFF_BITS(resp, 56, 4); | 
|  | card->cid.serial		= UNSTUFF_BITS(resp, 24, 32); | 
|  | card->cid.year			= UNSTUFF_BITS(resp, 12, 8); | 
|  | card->cid.month			= UNSTUFF_BITS(resp, 8, 4); | 
|  |  | 
|  | card->cid.year += 2000; /* SD cards year offset */ | 
|  | } else { | 
|  | /* | 
|  | * The selection of the format here is based upon published | 
|  | * specs from sandisk and from what people have reported. | 
|  | */ | 
|  | switch (card->csd.mmca_vsn) { | 
|  | case 0: /* MMC v1.0 - v1.2 */ | 
|  | case 1: /* MMC v1.4 */ | 
|  | card->cid.manfid	= UNSTUFF_BITS(resp, 104, 24); | 
|  | card->cid.prod_name[0]	= UNSTUFF_BITS(resp, 96, 8); | 
|  | card->cid.prod_name[1]	= UNSTUFF_BITS(resp, 88, 8); | 
|  | card->cid.prod_name[2]	= UNSTUFF_BITS(resp, 80, 8); | 
|  | card->cid.prod_name[3]	= UNSTUFF_BITS(resp, 72, 8); | 
|  | card->cid.prod_name[4]	= UNSTUFF_BITS(resp, 64, 8); | 
|  | card->cid.prod_name[5]	= UNSTUFF_BITS(resp, 56, 8); | 
|  | card->cid.prod_name[6]	= UNSTUFF_BITS(resp, 48, 8); | 
|  | card->cid.hwrev		= UNSTUFF_BITS(resp, 44, 4); | 
|  | card->cid.fwrev		= UNSTUFF_BITS(resp, 40, 4); | 
|  | card->cid.serial	= UNSTUFF_BITS(resp, 16, 24); | 
|  | card->cid.month		= UNSTUFF_BITS(resp, 12, 4); | 
|  | card->cid.year		= UNSTUFF_BITS(resp, 8, 4) + 1997; | 
|  | break; | 
|  |  | 
|  | case 2: /* MMC v2.0 - v2.2 */ | 
|  | case 3: /* MMC v3.1 - v3.3 */ | 
|  | card->cid.manfid	= UNSTUFF_BITS(resp, 120, 8); | 
|  | card->cid.oemid		= UNSTUFF_BITS(resp, 104, 16); | 
|  | card->cid.prod_name[0]	= UNSTUFF_BITS(resp, 96, 8); | 
|  | card->cid.prod_name[1]	= UNSTUFF_BITS(resp, 88, 8); | 
|  | card->cid.prod_name[2]	= UNSTUFF_BITS(resp, 80, 8); | 
|  | card->cid.prod_name[3]	= UNSTUFF_BITS(resp, 72, 8); | 
|  | card->cid.prod_name[4]	= UNSTUFF_BITS(resp, 64, 8); | 
|  | card->cid.prod_name[5]	= UNSTUFF_BITS(resp, 56, 8); | 
|  | card->cid.serial	= UNSTUFF_BITS(resp, 16, 32); | 
|  | card->cid.month		= UNSTUFF_BITS(resp, 12, 4); | 
|  | card->cid.year		= UNSTUFF_BITS(resp, 8, 4) + 1997; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | printk("%s: card has unknown MMCA version %d\n", | 
|  | mmc_hostname(card->host), card->csd.mmca_vsn); | 
|  | mmc_card_set_bad(card); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Given a 128-bit response, decode to our card CSD structure. | 
|  | */ | 
|  | static void mmc_decode_csd(struct mmc_card *card) | 
|  | { | 
|  | struct mmc_csd *csd = &card->csd; | 
|  | unsigned int e, m, csd_struct; | 
|  | u32 *resp = card->raw_csd; | 
|  |  | 
|  | if (mmc_card_sd(card)) { | 
|  | csd_struct = UNSTUFF_BITS(resp, 126, 2); | 
|  | if (csd_struct != 0) { | 
|  | printk("%s: unrecognised CSD structure version %d\n", | 
|  | mmc_hostname(card->host), csd_struct); | 
|  | mmc_card_set_bad(card); | 
|  | return; | 
|  | } | 
|  |  | 
|  | m = UNSTUFF_BITS(resp, 115, 4); | 
|  | e = UNSTUFF_BITS(resp, 112, 3); | 
|  | csd->tacc_ns	 = (tacc_exp[e] * tacc_mant[m] + 9) / 10; | 
|  | csd->tacc_clks	 = UNSTUFF_BITS(resp, 104, 8) * 100; | 
|  |  | 
|  | m = UNSTUFF_BITS(resp, 99, 4); | 
|  | e = UNSTUFF_BITS(resp, 96, 3); | 
|  | csd->max_dtr	  = tran_exp[e] * tran_mant[m]; | 
|  | csd->cmdclass	  = UNSTUFF_BITS(resp, 84, 12); | 
|  |  | 
|  | e = UNSTUFF_BITS(resp, 47, 3); | 
|  | m = UNSTUFF_BITS(resp, 62, 12); | 
|  | csd->capacity	  = (1 + m) << (e + 2); | 
|  |  | 
|  | csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); | 
|  | } else { | 
|  | /* | 
|  | * We only understand CSD structure v1.1 and v1.2. | 
|  | * v1.2 has extra information in bits 15, 11 and 10. | 
|  | */ | 
|  | csd_struct = UNSTUFF_BITS(resp, 126, 2); | 
|  | if (csd_struct != 1 && csd_struct != 2) { | 
|  | printk("%s: unrecognised CSD structure version %d\n", | 
|  | mmc_hostname(card->host), csd_struct); | 
|  | mmc_card_set_bad(card); | 
|  | return; | 
|  | } | 
|  |  | 
|  | csd->mmca_vsn	 = UNSTUFF_BITS(resp, 122, 4); | 
|  | m = UNSTUFF_BITS(resp, 115, 4); | 
|  | e = UNSTUFF_BITS(resp, 112, 3); | 
|  | csd->tacc_ns	 = (tacc_exp[e] * tacc_mant[m] + 9) / 10; | 
|  | csd->tacc_clks	 = UNSTUFF_BITS(resp, 104, 8) * 100; | 
|  |  | 
|  | m = UNSTUFF_BITS(resp, 99, 4); | 
|  | e = UNSTUFF_BITS(resp, 96, 3); | 
|  | csd->max_dtr	  = tran_exp[e] * tran_mant[m]; | 
|  | csd->cmdclass	  = UNSTUFF_BITS(resp, 84, 12); | 
|  |  | 
|  | e = UNSTUFF_BITS(resp, 47, 3); | 
|  | m = UNSTUFF_BITS(resp, 62, 12); | 
|  | csd->capacity	  = (1 + m) << (e + 2); | 
|  |  | 
|  | csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Given a 64-bit response, decode to our card SCR structure. | 
|  | */ | 
|  | static void mmc_decode_scr(struct mmc_card *card) | 
|  | { | 
|  | struct sd_scr *scr = &card->scr; | 
|  | unsigned int scr_struct; | 
|  | u32 resp[4]; | 
|  |  | 
|  | BUG_ON(!mmc_card_sd(card)); | 
|  |  | 
|  | resp[3] = card->raw_scr[1]; | 
|  | resp[2] = card->raw_scr[0]; | 
|  |  | 
|  | scr_struct = UNSTUFF_BITS(resp, 60, 4); | 
|  | if (scr_struct != 0) { | 
|  | printk("%s: unrecognised SCR structure version %d\n", | 
|  | mmc_hostname(card->host), scr_struct); | 
|  | mmc_card_set_bad(card); | 
|  | return; | 
|  | } | 
|  |  | 
|  | scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4); | 
|  | scr->bus_widths = UNSTUFF_BITS(resp, 48, 4); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Locate a MMC card on this MMC host given a raw CID. | 
|  | */ | 
|  | static struct mmc_card *mmc_find_card(struct mmc_host *host, u32 *raw_cid) | 
|  | { | 
|  | struct mmc_card *card; | 
|  |  | 
|  | list_for_each_entry(card, &host->cards, node) { | 
|  | if (memcmp(card->raw_cid, raw_cid, sizeof(card->raw_cid)) == 0) | 
|  | return card; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate a new MMC card, and assign a unique RCA. | 
|  | */ | 
|  | static struct mmc_card * | 
|  | mmc_alloc_card(struct mmc_host *host, u32 *raw_cid, unsigned int *frca) | 
|  | { | 
|  | struct mmc_card *card, *c; | 
|  | unsigned int rca = *frca; | 
|  |  | 
|  | card = kmalloc(sizeof(struct mmc_card), GFP_KERNEL); | 
|  | if (!card) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | mmc_init_card(card, host); | 
|  | memcpy(card->raw_cid, raw_cid, sizeof(card->raw_cid)); | 
|  |  | 
|  | again: | 
|  | list_for_each_entry(c, &host->cards, node) | 
|  | if (c->rca == rca) { | 
|  | rca++; | 
|  | goto again; | 
|  | } | 
|  |  | 
|  | card->rca = rca; | 
|  |  | 
|  | *frca = rca; | 
|  |  | 
|  | return card; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Tell attached cards to go to IDLE state | 
|  | */ | 
|  | static void mmc_idle_cards(struct mmc_host *host) | 
|  | { | 
|  | struct mmc_command cmd; | 
|  |  | 
|  | host->ios.chip_select = MMC_CS_HIGH; | 
|  | host->ops->set_ios(host, &host->ios); | 
|  |  | 
|  | mmc_delay(1); | 
|  |  | 
|  | cmd.opcode = MMC_GO_IDLE_STATE; | 
|  | cmd.arg = 0; | 
|  | cmd.flags = MMC_RSP_NONE; | 
|  |  | 
|  | mmc_wait_for_cmd(host, &cmd, 0); | 
|  |  | 
|  | mmc_delay(1); | 
|  |  | 
|  | host->ios.chip_select = MMC_CS_DONTCARE; | 
|  | host->ops->set_ios(host, &host->ios); | 
|  |  | 
|  | mmc_delay(1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Apply power to the MMC stack. | 
|  | */ | 
|  | static void mmc_power_up(struct mmc_host *host) | 
|  | { | 
|  | int bit = fls(host->ocr_avail) - 1; | 
|  |  | 
|  | host->ios.vdd = bit; | 
|  | host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; | 
|  | host->ios.chip_select = MMC_CS_DONTCARE; | 
|  | host->ios.power_mode = MMC_POWER_UP; | 
|  | host->ios.bus_width = MMC_BUS_WIDTH_1; | 
|  | host->ops->set_ios(host, &host->ios); | 
|  |  | 
|  | mmc_delay(1); | 
|  |  | 
|  | host->ios.clock = host->f_min; | 
|  | host->ios.power_mode = MMC_POWER_ON; | 
|  | host->ops->set_ios(host, &host->ios); | 
|  |  | 
|  | mmc_delay(2); | 
|  | } | 
|  |  | 
|  | static void mmc_power_off(struct mmc_host *host) | 
|  | { | 
|  | host->ios.clock = 0; | 
|  | host->ios.vdd = 0; | 
|  | host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; | 
|  | host->ios.chip_select = MMC_CS_DONTCARE; | 
|  | host->ios.power_mode = MMC_POWER_OFF; | 
|  | host->ios.bus_width = MMC_BUS_WIDTH_1; | 
|  | host->ops->set_ios(host, &host->ios); | 
|  | } | 
|  |  | 
|  | static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) | 
|  | { | 
|  | struct mmc_command cmd; | 
|  | int i, err = 0; | 
|  |  | 
|  | cmd.opcode = MMC_SEND_OP_COND; | 
|  | cmd.arg = ocr; | 
|  | cmd.flags = MMC_RSP_R3; | 
|  |  | 
|  | for (i = 100; i; i--) { | 
|  | err = mmc_wait_for_cmd(host, &cmd, 0); | 
|  | if (err != MMC_ERR_NONE) | 
|  | break; | 
|  |  | 
|  | if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) | 
|  | break; | 
|  |  | 
|  | err = MMC_ERR_TIMEOUT; | 
|  |  | 
|  | mmc_delay(10); | 
|  | } | 
|  |  | 
|  | if (rocr) | 
|  | *rocr = cmd.resp[0]; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) | 
|  | { | 
|  | struct mmc_command cmd; | 
|  | int i, err = 0; | 
|  |  | 
|  | cmd.opcode = SD_APP_OP_COND; | 
|  | cmd.arg = ocr; | 
|  | cmd.flags = MMC_RSP_R3; | 
|  |  | 
|  | for (i = 100; i; i--) { | 
|  | err = mmc_wait_for_app_cmd(host, 0, &cmd, CMD_RETRIES); | 
|  | if (err != MMC_ERR_NONE) | 
|  | break; | 
|  |  | 
|  | if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) | 
|  | break; | 
|  |  | 
|  | err = MMC_ERR_TIMEOUT; | 
|  |  | 
|  | mmc_delay(10); | 
|  | } | 
|  |  | 
|  | if (rocr) | 
|  | *rocr = cmd.resp[0]; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Discover cards by requesting their CID.  If this command | 
|  | * times out, it is not an error; there are no further cards | 
|  | * to be discovered.  Add new cards to the list. | 
|  | * | 
|  | * Create a mmc_card entry for each discovered card, assigning | 
|  | * it an RCA, and save the raw CID for decoding later. | 
|  | */ | 
|  | static void mmc_discover_cards(struct mmc_host *host) | 
|  | { | 
|  | struct mmc_card *card; | 
|  | unsigned int first_rca = 1, err; | 
|  |  | 
|  | while (1) { | 
|  | struct mmc_command cmd; | 
|  |  | 
|  | cmd.opcode = MMC_ALL_SEND_CID; | 
|  | cmd.arg = 0; | 
|  | cmd.flags = MMC_RSP_R2; | 
|  |  | 
|  | err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | 
|  | if (err == MMC_ERR_TIMEOUT) { | 
|  | err = MMC_ERR_NONE; | 
|  | break; | 
|  | } | 
|  | if (err != MMC_ERR_NONE) { | 
|  | printk(KERN_ERR "%s: error requesting CID: %d\n", | 
|  | mmc_hostname(host), err); | 
|  | break; | 
|  | } | 
|  |  | 
|  | card = mmc_find_card(host, cmd.resp); | 
|  | if (!card) { | 
|  | card = mmc_alloc_card(host, cmd.resp, &first_rca); | 
|  | if (IS_ERR(card)) { | 
|  | err = PTR_ERR(card); | 
|  | break; | 
|  | } | 
|  | list_add(&card->node, &host->cards); | 
|  | } | 
|  |  | 
|  | card->state &= ~MMC_STATE_DEAD; | 
|  |  | 
|  | if (host->mode == MMC_MODE_SD) { | 
|  | mmc_card_set_sd(card); | 
|  |  | 
|  | cmd.opcode = SD_SEND_RELATIVE_ADDR; | 
|  | cmd.arg = 0; | 
|  | cmd.flags = MMC_RSP_R1; | 
|  |  | 
|  | err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | 
|  | if (err != MMC_ERR_NONE) | 
|  | mmc_card_set_dead(card); | 
|  | else { | 
|  | card->rca = cmd.resp[0] >> 16; | 
|  |  | 
|  | if (!host->ops->get_ro) { | 
|  | printk(KERN_WARNING "%s: host does not " | 
|  | "support reading read-only " | 
|  | "switch. assuming write-enable.\n", | 
|  | mmc_hostname(host)); | 
|  | } else { | 
|  | if (host->ops->get_ro(host)) | 
|  | mmc_card_set_readonly(card); | 
|  | } | 
|  | } | 
|  | } else { | 
|  | cmd.opcode = MMC_SET_RELATIVE_ADDR; | 
|  | cmd.arg = card->rca << 16; | 
|  | cmd.flags = MMC_RSP_R1; | 
|  |  | 
|  | err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | 
|  | if (err != MMC_ERR_NONE) | 
|  | mmc_card_set_dead(card); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void mmc_read_csds(struct mmc_host *host) | 
|  | { | 
|  | struct mmc_card *card; | 
|  |  | 
|  | list_for_each_entry(card, &host->cards, node) { | 
|  | struct mmc_command cmd; | 
|  | int err; | 
|  |  | 
|  | if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) | 
|  | continue; | 
|  |  | 
|  | cmd.opcode = MMC_SEND_CSD; | 
|  | cmd.arg = card->rca << 16; | 
|  | cmd.flags = MMC_RSP_R2; | 
|  |  | 
|  | err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | 
|  | if (err != MMC_ERR_NONE) { | 
|  | mmc_card_set_dead(card); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | memcpy(card->raw_csd, cmd.resp, sizeof(card->raw_csd)); | 
|  |  | 
|  | mmc_decode_csd(card); | 
|  | mmc_decode_cid(card); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void mmc_read_scrs(struct mmc_host *host) | 
|  | { | 
|  | int err; | 
|  | struct mmc_card *card; | 
|  |  | 
|  | struct mmc_request mrq; | 
|  | struct mmc_command cmd; | 
|  | struct mmc_data data; | 
|  |  | 
|  | struct scatterlist sg; | 
|  |  | 
|  | list_for_each_entry(card, &host->cards, node) { | 
|  | if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) | 
|  | continue; | 
|  | if (!mmc_card_sd(card)) | 
|  | continue; | 
|  |  | 
|  | err = mmc_select_card(host, card); | 
|  | if (err != MMC_ERR_NONE) { | 
|  | mmc_card_set_dead(card); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | memset(&cmd, 0, sizeof(struct mmc_command)); | 
|  |  | 
|  | cmd.opcode = MMC_APP_CMD; | 
|  | cmd.arg = card->rca << 16; | 
|  | cmd.flags = MMC_RSP_R1; | 
|  |  | 
|  | err = mmc_wait_for_cmd(host, &cmd, 0); | 
|  | if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) { | 
|  | mmc_card_set_dead(card); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | memset(&cmd, 0, sizeof(struct mmc_command)); | 
|  |  | 
|  | cmd.opcode = SD_APP_SEND_SCR; | 
|  | cmd.arg = 0; | 
|  | cmd.flags = MMC_RSP_R1; | 
|  |  | 
|  | memset(&data, 0, sizeof(struct mmc_data)); | 
|  |  | 
|  | data.timeout_ns = card->csd.tacc_ns * 10; | 
|  | data.timeout_clks = card->csd.tacc_clks * 10; | 
|  | data.blksz_bits = 3; | 
|  | data.blocks = 1; | 
|  | data.flags = MMC_DATA_READ; | 
|  | data.sg = &sg; | 
|  | data.sg_len = 1; | 
|  |  | 
|  | memset(&mrq, 0, sizeof(struct mmc_request)); | 
|  |  | 
|  | mrq.cmd = &cmd; | 
|  | mrq.data = &data; | 
|  |  | 
|  | sg_init_one(&sg, (u8*)card->raw_scr, 8); | 
|  |  | 
|  | err = mmc_wait_for_req(host, &mrq); | 
|  | if (err != MMC_ERR_NONE) { | 
|  | mmc_card_set_dead(card); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | card->raw_scr[0] = ntohl(card->raw_scr[0]); | 
|  | card->raw_scr[1] = ntohl(card->raw_scr[1]); | 
|  |  | 
|  | mmc_decode_scr(card); | 
|  | } | 
|  |  | 
|  | mmc_deselect_cards(host); | 
|  | } | 
|  |  | 
|  | static unsigned int mmc_calculate_clock(struct mmc_host *host) | 
|  | { | 
|  | struct mmc_card *card; | 
|  | unsigned int max_dtr = host->f_max; | 
|  |  | 
|  | list_for_each_entry(card, &host->cards, node) | 
|  | if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr) | 
|  | max_dtr = card->csd.max_dtr; | 
|  |  | 
|  | DBG("MMC: selected %d.%03dMHz transfer rate\n", | 
|  | max_dtr / 1000000, (max_dtr / 1000) % 1000); | 
|  |  | 
|  | return max_dtr; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check whether cards we already know about are still present. | 
|  | * We do this by requesting status, and checking whether a card | 
|  | * responds. | 
|  | * | 
|  | * A request for status does not cause a state change in data | 
|  | * transfer mode. | 
|  | */ | 
|  | static void mmc_check_cards(struct mmc_host *host) | 
|  | { | 
|  | struct list_head *l, *n; | 
|  |  | 
|  | mmc_deselect_cards(host); | 
|  |  | 
|  | list_for_each_safe(l, n, &host->cards) { | 
|  | struct mmc_card *card = mmc_list_to_card(l); | 
|  | struct mmc_command cmd; | 
|  | int err; | 
|  |  | 
|  | cmd.opcode = MMC_SEND_STATUS; | 
|  | cmd.arg = card->rca << 16; | 
|  | cmd.flags = MMC_RSP_R1; | 
|  |  | 
|  | err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | 
|  | if (err == MMC_ERR_NONE) | 
|  | continue; | 
|  |  | 
|  | mmc_card_set_dead(card); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void mmc_setup(struct mmc_host *host) | 
|  | { | 
|  | if (host->ios.power_mode != MMC_POWER_ON) { | 
|  | int err; | 
|  | u32 ocr; | 
|  |  | 
|  | host->mode = MMC_MODE_SD; | 
|  |  | 
|  | mmc_power_up(host); | 
|  | mmc_idle_cards(host); | 
|  |  | 
|  | err = mmc_send_app_op_cond(host, 0, &ocr); | 
|  |  | 
|  | /* | 
|  | * If we fail to detect any SD cards then try | 
|  | * searching for MMC cards. | 
|  | */ | 
|  | if (err != MMC_ERR_NONE) { | 
|  | host->mode = MMC_MODE_MMC; | 
|  |  | 
|  | err = mmc_send_op_cond(host, 0, &ocr); | 
|  | if (err != MMC_ERR_NONE) | 
|  | return; | 
|  | } | 
|  |  | 
|  | host->ocr = mmc_select_voltage(host, ocr); | 
|  |  | 
|  | /* | 
|  | * Since we're changing the OCR value, we seem to | 
|  | * need to tell some cards to go back to the idle | 
|  | * state.  We wait 1ms to give cards time to | 
|  | * respond. | 
|  | */ | 
|  | if (host->ocr) | 
|  | mmc_idle_cards(host); | 
|  | } else { | 
|  | host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; | 
|  | host->ios.clock = host->f_min; | 
|  | host->ops->set_ios(host, &host->ios); | 
|  |  | 
|  | /* | 
|  | * We should remember the OCR mask from the existing | 
|  | * cards, and detect the new cards OCR mask, combine | 
|  | * the two and re-select the VDD.  However, if we do | 
|  | * change VDD, we should do an idle, and then do a | 
|  | * full re-initialisation.  We would need to notify | 
|  | * drivers so that they can re-setup the cards as | 
|  | * well, while keeping their queues at bay. | 
|  | * | 
|  | * For the moment, we take the easy way out - if the | 
|  | * new cards don't like our currently selected VDD, | 
|  | * they drop off the bus. | 
|  | */ | 
|  | } | 
|  |  | 
|  | if (host->ocr == 0) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Send the selected OCR multiple times... until the cards | 
|  | * all get the idea that they should be ready for CMD2. | 
|  | * (My SanDisk card seems to need this.) | 
|  | */ | 
|  | if (host->mode == MMC_MODE_SD) | 
|  | mmc_send_app_op_cond(host, host->ocr, NULL); | 
|  | else | 
|  | mmc_send_op_cond(host, host->ocr, NULL); | 
|  |  | 
|  | mmc_discover_cards(host); | 
|  |  | 
|  | /* | 
|  | * Ok, now switch to push-pull mode. | 
|  | */ | 
|  | host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; | 
|  | host->ops->set_ios(host, &host->ios); | 
|  |  | 
|  | mmc_read_csds(host); | 
|  |  | 
|  | if (host->mode == MMC_MODE_SD) | 
|  | mmc_read_scrs(host); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | *	mmc_detect_change - process change of state on a MMC socket | 
|  | *	@host: host which changed state. | 
|  | *	@delay: optional delay to wait before detection (jiffies) | 
|  | * | 
|  | *	All we know is that card(s) have been inserted or removed | 
|  | *	from the socket(s).  We don't know which socket or cards. | 
|  | */ | 
|  | void mmc_detect_change(struct mmc_host *host, unsigned long delay) | 
|  | { | 
|  | if (delay) | 
|  | schedule_delayed_work(&host->detect, delay); | 
|  | else | 
|  | schedule_work(&host->detect); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_detect_change); | 
|  |  | 
|  |  | 
|  | static void mmc_rescan(void *data) | 
|  | { | 
|  | struct mmc_host *host = data; | 
|  | struct list_head *l, *n; | 
|  |  | 
|  | mmc_claim_host(host); | 
|  |  | 
|  | if (host->ios.power_mode == MMC_POWER_ON) | 
|  | mmc_check_cards(host); | 
|  |  | 
|  | mmc_setup(host); | 
|  |  | 
|  | if (!list_empty(&host->cards)) { | 
|  | /* | 
|  | * (Re-)calculate the fastest clock rate which the | 
|  | * attached cards and the host support. | 
|  | */ | 
|  | host->ios.clock = mmc_calculate_clock(host); | 
|  | host->ops->set_ios(host, &host->ios); | 
|  | } | 
|  |  | 
|  | mmc_release_host(host); | 
|  |  | 
|  | list_for_each_safe(l, n, &host->cards) { | 
|  | struct mmc_card *card = mmc_list_to_card(l); | 
|  |  | 
|  | /* | 
|  | * If this is a new and good card, register it. | 
|  | */ | 
|  | if (!mmc_card_present(card) && !mmc_card_dead(card)) { | 
|  | if (mmc_register_card(card)) | 
|  | mmc_card_set_dead(card); | 
|  | else | 
|  | mmc_card_set_present(card); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If this card is dead, destroy it. | 
|  | */ | 
|  | if (mmc_card_dead(card)) { | 
|  | list_del(&card->node); | 
|  | mmc_remove_card(card); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we discover that there are no cards on the | 
|  | * bus, turn off the clock and power down. | 
|  | */ | 
|  | if (list_empty(&host->cards)) | 
|  | mmc_power_off(host); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | *	mmc_alloc_host - initialise the per-host structure. | 
|  | *	@extra: sizeof private data structure | 
|  | *	@dev: pointer to host device model structure | 
|  | * | 
|  | *	Initialise the per-host structure. | 
|  | */ | 
|  | struct mmc_host *mmc_alloc_host(int extra, struct device *dev) | 
|  | { | 
|  | struct mmc_host *host; | 
|  |  | 
|  | host = mmc_alloc_host_sysfs(extra, dev); | 
|  | if (host) { | 
|  | spin_lock_init(&host->lock); | 
|  | init_waitqueue_head(&host->wq); | 
|  | INIT_LIST_HEAD(&host->cards); | 
|  | INIT_WORK(&host->detect, mmc_rescan, host); | 
|  |  | 
|  | /* | 
|  | * By default, hosts do not support SGIO or large requests. | 
|  | * They have to set these according to their abilities. | 
|  | */ | 
|  | host->max_hw_segs = 1; | 
|  | host->max_phys_segs = 1; | 
|  | host->max_sectors = 1 << (PAGE_CACHE_SHIFT - 9); | 
|  | host->max_seg_size = PAGE_CACHE_SIZE; | 
|  | } | 
|  |  | 
|  | return host; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_alloc_host); | 
|  |  | 
|  | /** | 
|  | *	mmc_add_host - initialise host hardware | 
|  | *	@host: mmc host | 
|  | */ | 
|  | int mmc_add_host(struct mmc_host *host) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = mmc_add_host_sysfs(host); | 
|  | if (ret == 0) { | 
|  | mmc_power_off(host); | 
|  | mmc_detect_change(host, 0); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_add_host); | 
|  |  | 
|  | /** | 
|  | *	mmc_remove_host - remove host hardware | 
|  | *	@host: mmc host | 
|  | * | 
|  | *	Unregister and remove all cards associated with this host, | 
|  | *	and power down the MMC bus. | 
|  | */ | 
|  | void mmc_remove_host(struct mmc_host *host) | 
|  | { | 
|  | struct list_head *l, *n; | 
|  |  | 
|  | list_for_each_safe(l, n, &host->cards) { | 
|  | struct mmc_card *card = mmc_list_to_card(l); | 
|  |  | 
|  | mmc_remove_card(card); | 
|  | } | 
|  |  | 
|  | mmc_power_off(host); | 
|  | mmc_remove_host_sysfs(host); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_remove_host); | 
|  |  | 
|  | /** | 
|  | *	mmc_free_host - free the host structure | 
|  | *	@host: mmc host | 
|  | * | 
|  | *	Free the host once all references to it have been dropped. | 
|  | */ | 
|  | void mmc_free_host(struct mmc_host *host) | 
|  | { | 
|  | flush_scheduled_work(); | 
|  | mmc_free_host_sysfs(host); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_free_host); | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | /** | 
|  | *	mmc_suspend_host - suspend a host | 
|  | *	@host: mmc host | 
|  | *	@state: suspend mode (PM_SUSPEND_xxx) | 
|  | */ | 
|  | int mmc_suspend_host(struct mmc_host *host, pm_message_t state) | 
|  | { | 
|  | mmc_claim_host(host); | 
|  | mmc_deselect_cards(host); | 
|  | mmc_power_off(host); | 
|  | mmc_release_host(host); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_suspend_host); | 
|  |  | 
|  | /** | 
|  | *	mmc_resume_host - resume a previously suspended host | 
|  | *	@host: mmc host | 
|  | */ | 
|  | int mmc_resume_host(struct mmc_host *host) | 
|  | { | 
|  | mmc_detect_change(host, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_resume_host); | 
|  |  | 
|  | #endif | 
|  |  | 
|  | MODULE_LICENSE("GPL"); |