|  | /* mac8390.c: New driver for 8390-based Nubus (or Nubus-alike) | 
|  | Ethernet cards on Linux */ | 
|  | /* Based on the former daynaport.c driver, by Alan Cox.  Some code | 
|  | taken from or inspired by skeleton.c by Donald Becker, acenic.c by | 
|  | Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker. | 
|  |  | 
|  | This software may be used and distributed according to the terms of | 
|  | the GNU Public License, incorporated herein by reference.  */ | 
|  |  | 
|  | /* 2000-02-28: support added for Dayna and Kinetics cards by | 
|  | A.G.deWijn@phys.uu.nl */ | 
|  | /* 2000-04-04: support added for Dayna2 by bart@etpmod.phys.tue.nl */ | 
|  | /* 2001-04-18: support for DaynaPort E/LC-M by rayk@knightsmanor.org */ | 
|  | /* 2001-05-15: support for Cabletron ported from old daynaport driver | 
|  | * and fixed access to Sonic Sys card which masquerades as a Farallon | 
|  | * by rayk@knightsmanor.org */ | 
|  |  | 
|  | #include <linux/version.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/fcntl.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/nubus.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/bitops.h> | 
|  |  | 
|  | #include <asm/system.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/dma.h> | 
|  | #include <asm/hwtest.h> | 
|  | #include <asm/macints.h> | 
|  |  | 
|  | #include "8390.h" | 
|  |  | 
|  | #define WD_START_PG			0x00	/* First page of TX buffer */ | 
|  | #define CABLETRON_RX_START_PG		0x00    /* First page of RX buffer */ | 
|  | #define CABLETRON_RX_STOP_PG		0x30    /* Last page +1 of RX ring */ | 
|  | #define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG  /* First page of TX buffer */ | 
|  |  | 
|  | /* Unfortunately it seems we have to hardcode these for the moment */ | 
|  | /* Shouldn't the card know about this? Does anyone know where to read it off the card? Do we trust the data provided by the card? */ | 
|  |  | 
|  | #define DAYNA_8390_BASE		0x80000 | 
|  | #define DAYNA_8390_MEM		0x00000 | 
|  |  | 
|  | #define KINETICS_8390_BASE	0x80000 | 
|  | #define KINETICS_8390_MEM	0x00000 | 
|  |  | 
|  | #define CABLETRON_8390_BASE	0x90000 | 
|  | #define CABLETRON_8390_MEM	0x00000 | 
|  |  | 
|  | enum mac8390_type { | 
|  | MAC8390_NONE = -1, | 
|  | MAC8390_APPLE, | 
|  | MAC8390_ASANTE, | 
|  | MAC8390_FARALLON,  /* Apple, Asante, and Farallon are all compatible */ | 
|  | MAC8390_CABLETRON, | 
|  | MAC8390_DAYNA, | 
|  | MAC8390_INTERLAN, | 
|  | MAC8390_KINETICS, | 
|  | MAC8390_FOCUS, | 
|  | MAC8390_SONICSYS, | 
|  | MAC8390_DAYNA2, | 
|  | MAC8390_DAYNA3, | 
|  | }; | 
|  |  | 
|  | static const char * cardname[] = { | 
|  | "apple", | 
|  | "asante", | 
|  | "farallon", | 
|  | "cabletron", | 
|  | "dayna", | 
|  | "interlan", | 
|  | "kinetics", | 
|  | "focus", | 
|  | "sonic systems", | 
|  | "dayna2", | 
|  | "dayna_lc", | 
|  | }; | 
|  |  | 
|  | static int word16[] = { | 
|  | 1, /* apple */ | 
|  | 1, /* asante */ | 
|  | 1, /* farallon */ | 
|  | 1, /* cabletron */ | 
|  | 0, /* dayna */ | 
|  | 1, /* interlan */ | 
|  | 0, /* kinetics */ | 
|  | 1, /* focus (??) */ | 
|  | 1, /* sonic systems  */ | 
|  | 1, /* dayna2 */ | 
|  | 1, /* dayna-lc */ | 
|  | }; | 
|  |  | 
|  | /* on which cards do we use NuBus resources? */ | 
|  | static int useresources[] = { | 
|  | 1, /* apple */ | 
|  | 1, /* asante */ | 
|  | 1, /* farallon */ | 
|  | 0, /* cabletron */ | 
|  | 0, /* dayna */ | 
|  | 0, /* interlan */ | 
|  | 0, /* kinetics */ | 
|  | 0, /* focus (??) */ | 
|  | 1, /* sonic systems */ | 
|  | 1, /* dayna2 */ | 
|  | 1, /* dayna-lc */ | 
|  | }; | 
|  |  | 
|  | static char version[] __initdata = | 
|  | "mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n"; | 
|  |  | 
|  | extern enum mac8390_type mac8390_ident(struct nubus_dev * dev); | 
|  | extern int mac8390_memsize(unsigned long membase); | 
|  | extern int mac8390_memtest(struct net_device * dev); | 
|  | static int mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev, | 
|  | enum mac8390_type type); | 
|  |  | 
|  | static int mac8390_open(struct net_device * dev); | 
|  | static int mac8390_close(struct net_device * dev); | 
|  | static void mac8390_no_reset(struct net_device *dev); | 
|  |  | 
|  | /* Sane (32-bit chunk memory read/write) - Apple/Asante/Farallon do this*/ | 
|  | static void sane_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page); | 
|  | static void sane_block_input(struct net_device * dev, int count, | 
|  | struct sk_buff * skb, int ring_offset); | 
|  | static void sane_block_output(struct net_device * dev, int count, | 
|  | const unsigned char * buf, const int start_page); | 
|  |  | 
|  | /* dayna_memcpy to and from card */ | 
|  | static void dayna_memcpy_fromcard(struct net_device *dev, void *to, | 
|  | int from, int count); | 
|  | static void dayna_memcpy_tocard(struct net_device *dev, int to, | 
|  | const void *from, int count); | 
|  |  | 
|  | /* Dayna - Dayna/Kinetics use this */ | 
|  | static void dayna_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page); | 
|  | static void dayna_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset); | 
|  | static void dayna_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, int start_page); | 
|  |  | 
|  | #define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c)) | 
|  | #define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c)) | 
|  |  | 
|  | /* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */ | 
|  | static void slow_sane_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page); | 
|  | static void slow_sane_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset); | 
|  | static void slow_sane_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, int start_page); | 
|  | static void word_memcpy_tocard(void *tp, const void *fp, int count); | 
|  | static void word_memcpy_fromcard(void *tp, const void *fp, int count); | 
|  |  | 
|  | enum mac8390_type __init mac8390_ident(struct nubus_dev * dev) | 
|  | { | 
|  | if (dev->dr_sw == NUBUS_DRSW_ASANTE) | 
|  | return MAC8390_ASANTE; | 
|  | if (dev->dr_sw == NUBUS_DRSW_FARALLON) | 
|  | return MAC8390_FARALLON; | 
|  | if (dev->dr_sw == NUBUS_DRSW_KINETICS) | 
|  | return MAC8390_KINETICS; | 
|  | if (dev->dr_sw == NUBUS_DRSW_DAYNA) | 
|  | return MAC8390_DAYNA; | 
|  | if (dev->dr_sw == NUBUS_DRSW_DAYNA2) | 
|  | return MAC8390_DAYNA2; | 
|  | if (dev->dr_sw == NUBUS_DRSW_DAYNA_LC) | 
|  | return MAC8390_DAYNA3; | 
|  | if (dev->dr_hw == NUBUS_DRHW_CABLETRON) | 
|  | return MAC8390_CABLETRON; | 
|  | return MAC8390_NONE; | 
|  | } | 
|  |  | 
|  | int __init mac8390_memsize(unsigned long membase) | 
|  | { | 
|  | unsigned long flags; | 
|  | int i, j; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | /* Check up to 32K in 4K increments */ | 
|  | for (i = 0; i < 8; i++) { | 
|  | volatile unsigned short *m = (unsigned short *) (membase + (i * 0x1000)); | 
|  |  | 
|  | /* Unwriteable - we have a fully decoded card and the | 
|  | RAM end located */ | 
|  | if (hwreg_present(m) == 0) | 
|  | break; | 
|  |  | 
|  | /* write a distinctive byte */ | 
|  | *m = 0xA5A0 | i; | 
|  | /* check that we read back what we wrote */ | 
|  | if (*m != (0xA5A0 | i)) | 
|  | break; | 
|  |  | 
|  | /* check for partial decode and wrap */ | 
|  | for (j = 0; j < i; j++) { | 
|  | volatile unsigned short *p = (unsigned short *) (membase + (j * 0x1000)); | 
|  | if (*p != (0xA5A0 | j)) | 
|  | break; | 
|  | } | 
|  | } | 
|  | local_irq_restore(flags); | 
|  | /* in any case, we stopped once we tried one block too many, | 
|  | or once we reached 32K */ | 
|  | return i * 0x1000; | 
|  | } | 
|  |  | 
|  | struct net_device * __init mac8390_probe(int unit) | 
|  | { | 
|  | struct net_device *dev; | 
|  | volatile unsigned short *i; | 
|  | int version_disp = 0; | 
|  | struct nubus_dev * ndev = NULL; | 
|  | int err = -ENODEV; | 
|  |  | 
|  | struct nubus_dir dir; | 
|  | struct nubus_dirent ent; | 
|  | int offset; | 
|  | static unsigned int slots; | 
|  |  | 
|  | enum mac8390_type cardtype; | 
|  |  | 
|  | /* probably should check for Nubus instead */ | 
|  |  | 
|  | if (!MACH_IS_MAC) | 
|  | return ERR_PTR(-ENODEV); | 
|  |  | 
|  | dev = alloc_ei_netdev(); | 
|  | if (!dev) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | if (unit >= 0) | 
|  | sprintf(dev->name, "eth%d", unit); | 
|  |  | 
|  | SET_MODULE_OWNER(dev); | 
|  |  | 
|  | while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev))) { | 
|  | /* Have we seen it already? */ | 
|  | if (slots & (1<<ndev->board->slot)) | 
|  | continue; | 
|  | slots |= 1<<ndev->board->slot; | 
|  |  | 
|  | if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE) | 
|  | continue; | 
|  |  | 
|  | if (version_disp == 0) { | 
|  | version_disp = 1; | 
|  | printk(version); | 
|  | } | 
|  |  | 
|  | dev->irq = SLOT2IRQ(ndev->board->slot); | 
|  | /* This is getting to be a habit */ | 
|  | dev->base_addr = ndev->board->slot_addr | ((ndev->board->slot&0xf) << 20); | 
|  |  | 
|  | /* Get some Nubus info - we will trust the card's idea | 
|  | of where its memory and registers are. */ | 
|  |  | 
|  | if (nubus_get_func_dir(ndev, &dir) == -1) { | 
|  | printk(KERN_ERR "%s: Unable to get Nubus functional" | 
|  | " directory for slot %X!\n", | 
|  | dev->name, ndev->board->slot); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Get the MAC address */ | 
|  | if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) { | 
|  | printk(KERN_INFO "%s: Couldn't get MAC address!\n", | 
|  | dev->name); | 
|  | continue; | 
|  | } else { | 
|  | nubus_get_rsrc_mem(dev->dev_addr, &ent, 6); | 
|  | /* Some Sonic Sys cards masquerade as Farallon */ | 
|  | if (cardtype == MAC8390_FARALLON && | 
|  | dev->dev_addr[0] == 0x0 && | 
|  | dev->dev_addr[1] == 0x40 && | 
|  | dev->dev_addr[2] == 0x10) { | 
|  | /* This is really Sonic Sys card */ | 
|  | cardtype = MAC8390_SONICSYS; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (useresources[cardtype] == 1) { | 
|  | nubus_rewinddir(&dir); | 
|  | if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) { | 
|  | printk(KERN_ERR "%s: Memory offset resource" | 
|  | " for slot %X not found!\n", | 
|  | dev->name, ndev->board->slot); | 
|  | continue; | 
|  | } | 
|  | nubus_get_rsrc_mem(&offset, &ent, 4); | 
|  | dev->mem_start = dev->base_addr + offset; | 
|  | /* yes, this is how the Apple driver does it */ | 
|  | dev->base_addr = dev->mem_start + 0x10000; | 
|  | nubus_rewinddir(&dir); | 
|  | if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) { | 
|  | printk(KERN_INFO "%s: Memory length resource" | 
|  | " for slot %X not found" | 
|  | ", probing\n", | 
|  | dev->name, ndev->board->slot); | 
|  | offset = mac8390_memsize(dev->mem_start); | 
|  | } else { | 
|  | nubus_get_rsrc_mem(&offset, &ent, 4); | 
|  | } | 
|  | dev->mem_end = dev->mem_start + offset; | 
|  | } else { | 
|  | switch (cardtype) { | 
|  | case MAC8390_KINETICS: | 
|  | case MAC8390_DAYNA: /* it's the same */ | 
|  | dev->base_addr = | 
|  | (int)(ndev->board->slot_addr + | 
|  | DAYNA_8390_BASE); | 
|  | dev->mem_start = | 
|  | (int)(ndev->board->slot_addr + | 
|  | DAYNA_8390_MEM); | 
|  | dev->mem_end = | 
|  | dev->mem_start + | 
|  | mac8390_memsize(dev->mem_start); | 
|  | break; | 
|  | case MAC8390_CABLETRON: | 
|  | dev->base_addr = | 
|  | (int)(ndev->board->slot_addr + | 
|  | CABLETRON_8390_BASE); | 
|  | dev->mem_start = | 
|  | (int)(ndev->board->slot_addr + | 
|  | CABLETRON_8390_MEM); | 
|  | /* The base address is unreadable if 0x00 | 
|  | * has been written to the command register | 
|  | * Reset the chip by writing E8390_NODMA + | 
|  | *   E8390_PAGE0 + E8390_STOP just to be | 
|  | *   sure | 
|  | */ | 
|  | i = (void *)dev->base_addr; | 
|  | *i = 0x21; | 
|  | dev->mem_end = | 
|  | dev->mem_start + | 
|  | mac8390_memsize(dev->mem_start); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | printk(KERN_ERR "Card type %s is" | 
|  | " unsupported, sorry\n", | 
|  | cardname[cardtype]); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Do the nasty 8390 stuff */ | 
|  | if (!mac8390_initdev(dev, ndev, cardtype)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!ndev) | 
|  | goto out; | 
|  | err = register_netdev(dev); | 
|  | if (err) | 
|  | goto out; | 
|  | return dev; | 
|  |  | 
|  | out: | 
|  | free_netdev(dev); | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | #ifdef MODULE | 
|  | MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others"); | 
|  | MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | /* overkill, of course */ | 
|  | static struct net_device *dev_mac8390[15]; | 
|  | int init_module(void) | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < 15; i++) { | 
|  | struct net_device *dev = mac8390_probe(-1); | 
|  | if (IS_ERR(dev)) | 
|  | break; | 
|  | dev_mac890[i] = dev; | 
|  | } | 
|  | if (!i) { | 
|  | printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void cleanup_module(void) | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < 15; i++) { | 
|  | struct net_device *dev = dev_mac890[i]; | 
|  | if (dev) { | 
|  | unregister_netdev(dev); | 
|  | free_netdev(dev); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #endif /* MODULE */ | 
|  |  | 
|  | static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev, | 
|  | enum mac8390_type type) | 
|  | { | 
|  | static u32 fwrd4_offsets[16]={ | 
|  | 0,      4,      8,      12, | 
|  | 16,     20,     24,     28, | 
|  | 32,     36,     40,     44, | 
|  | 48,     52,     56,     60 | 
|  | }; | 
|  | static u32 back4_offsets[16]={ | 
|  | 60,     56,     52,     48, | 
|  | 44,     40,     36,     32, | 
|  | 28,     24,     20,     16, | 
|  | 12,     8,      4,      0 | 
|  | }; | 
|  | static u32 fwrd2_offsets[16]={ | 
|  | 0,      2,      4,      6, | 
|  | 8,     10,     12,     14, | 
|  | 16,    18,     20,     22, | 
|  | 24,    26,     28,     30 | 
|  | }; | 
|  |  | 
|  | int access_bitmode; | 
|  |  | 
|  | /* Now fill in our stuff */ | 
|  | dev->open = &mac8390_open; | 
|  | dev->stop = &mac8390_close; | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | dev->poll_controller = ei_poll; | 
|  | #endif | 
|  |  | 
|  | /* GAR, ei_status is actually a macro even though it looks global */ | 
|  | ei_status.name = cardname[type]; | 
|  | ei_status.word16 = word16[type]; | 
|  |  | 
|  | /* Cabletron's TX/RX buffers are backwards */ | 
|  | if (type == MAC8390_CABLETRON) { | 
|  | ei_status.tx_start_page = CABLETRON_TX_START_PG; | 
|  | ei_status.rx_start_page = CABLETRON_RX_START_PG; | 
|  | ei_status.stop_page = CABLETRON_RX_STOP_PG; | 
|  | ei_status.rmem_start = dev->mem_start; | 
|  | ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256; | 
|  | } else { | 
|  | ei_status.tx_start_page = WD_START_PG; | 
|  | ei_status.rx_start_page = WD_START_PG + TX_PAGES; | 
|  | ei_status.stop_page = (dev->mem_end - dev->mem_start)/256; | 
|  | ei_status.rmem_start = dev->mem_start + TX_PAGES*256; | 
|  | ei_status.rmem_end = dev->mem_end; | 
|  | } | 
|  |  | 
|  | /* Fill in model-specific information and functions */ | 
|  | switch(type) { | 
|  | case MAC8390_SONICSYS: | 
|  | /* 16 bit card, register map is reversed */ | 
|  | ei_status.reset_8390 = &mac8390_no_reset; | 
|  | ei_status.block_input = &slow_sane_block_input; | 
|  | ei_status.block_output = &slow_sane_block_output; | 
|  | ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; | 
|  | ei_status.reg_offset = back4_offsets; | 
|  | access_bitmode = 0; | 
|  | break; | 
|  | case MAC8390_FARALLON: | 
|  | case MAC8390_APPLE: | 
|  | case MAC8390_ASANTE: | 
|  | case MAC8390_DAYNA2: | 
|  | case MAC8390_DAYNA3: | 
|  | /* 32 bit card, register map is reversed */ | 
|  | /* sane */ | 
|  | ei_status.reset_8390 = &mac8390_no_reset; | 
|  | ei_status.block_input = &sane_block_input; | 
|  | ei_status.block_output = &sane_block_output; | 
|  | ei_status.get_8390_hdr = &sane_get_8390_hdr; | 
|  | ei_status.reg_offset = back4_offsets; | 
|  | access_bitmode = 1; | 
|  | break; | 
|  | case MAC8390_CABLETRON: | 
|  | /* 16 bit card, register map is short forward */ | 
|  | ei_status.reset_8390 = &mac8390_no_reset; | 
|  | ei_status.block_input = &slow_sane_block_input; | 
|  | ei_status.block_output = &slow_sane_block_output; | 
|  | ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; | 
|  | ei_status.reg_offset = fwrd2_offsets; | 
|  | access_bitmode = 0; | 
|  | break; | 
|  | case MAC8390_DAYNA: | 
|  | case MAC8390_KINETICS: | 
|  | /* 16 bit memory */ | 
|  | /* dayna and similar */ | 
|  | ei_status.reset_8390 = &mac8390_no_reset; | 
|  | ei_status.block_input = &dayna_block_input; | 
|  | ei_status.block_output = &dayna_block_output; | 
|  | ei_status.get_8390_hdr = &dayna_get_8390_hdr; | 
|  | ei_status.reg_offset = fwrd4_offsets; | 
|  | access_bitmode = 0; | 
|  | break; | 
|  | default: | 
|  | printk(KERN_ERR "Card type %s is unsupported, sorry\n", cardname[type]); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | NS8390_init(dev, 0); | 
|  |  | 
|  | /* Good, done, now spit out some messages */ | 
|  | printk(KERN_INFO "%s: %s in slot %X (type %s)\n", | 
|  | dev->name, ndev->board->name, ndev->board->slot, cardname[type]); | 
|  | printk(KERN_INFO "MAC "); | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < 6; i++) { | 
|  | printk("%2.2x", dev->dev_addr[i]); | 
|  | if (i < 5) | 
|  | printk(":"); | 
|  | } | 
|  | } | 
|  | printk(" IRQ %d, shared memory at %#lx-%#lx,  %d-bit access.\n", | 
|  | dev->irq, dev->mem_start, dev->mem_end-1, | 
|  | access_bitmode?32:16); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mac8390_open(struct net_device *dev) | 
|  | { | 
|  | ei_open(dev); | 
|  | if (request_irq(dev->irq, ei_interrupt, 0, "8390 Ethernet", dev)) { | 
|  | printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq); | 
|  | return -EAGAIN; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mac8390_close(struct net_device *dev) | 
|  | { | 
|  | free_irq(dev->irq, dev); | 
|  | ei_close(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mac8390_no_reset(struct net_device *dev) | 
|  | { | 
|  | ei_status.txing = 0; | 
|  | if (ei_debug > 1) | 
|  | printk("reset not supported\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* dayna_memcpy_fromio/dayna_memcpy_toio */ | 
|  | /* directly from daynaport.c by Alan Cox */ | 
|  | static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, int count) | 
|  | { | 
|  | volatile unsigned short *ptr; | 
|  | unsigned short *target=to; | 
|  | from<<=1;	/* word, skip overhead */ | 
|  | ptr=(unsigned short *)(dev->mem_start+from); | 
|  | /* Leading byte? */ | 
|  | if (from&2) { | 
|  | *((char *)target)++ = *(((char *)ptr++)-1); | 
|  | count--; | 
|  | } | 
|  | while(count>=2) | 
|  | { | 
|  | *target++=*ptr++;	/* Copy and */ | 
|  | ptr++;			/* skip cruft */ | 
|  | count-=2; | 
|  | } | 
|  | /* Trailing byte? */ | 
|  | if(count) | 
|  | { | 
|  | /* Big endian */ | 
|  | unsigned short v=*ptr; | 
|  | *((char *)target)=v>>8; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void dayna_memcpy_tocard(struct net_device *dev, int to, const void *from, int count) | 
|  | { | 
|  | volatile unsigned short *ptr; | 
|  | const unsigned short *src=from; | 
|  | to<<=1;	/* word, skip overhead */ | 
|  | ptr=(unsigned short *)(dev->mem_start+to); | 
|  | /* Leading byte? */ | 
|  | if (to&2) { /* avoid a byte write (stomps on other data) */ | 
|  | ptr[-1] = (ptr[-1]&0xFF00)|*((unsigned char *)src)++; | 
|  | ptr++; | 
|  | count--; | 
|  | } | 
|  | while(count>=2) | 
|  | { | 
|  | *ptr++=*src++;		/* Copy and */ | 
|  | ptr++;			/* skip cruft */ | 
|  | count-=2; | 
|  | } | 
|  | /* Trailing byte? */ | 
|  | if(count) | 
|  | { | 
|  | /* Big endian */ | 
|  | unsigned short v=*src; | 
|  | /* card doesn't like byte writes */ | 
|  | *ptr=(*ptr&0x00FF)|(v&0xFF00); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* sane block input/output */ | 
|  | static void sane_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page) | 
|  | { | 
|  | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
|  | memcpy_fromio((void *)hdr, (char *)dev->mem_start + hdr_start, 4); | 
|  | /* Fix endianness */ | 
|  | hdr->count = swab16(hdr->count); | 
|  | } | 
|  |  | 
|  | static void sane_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset) | 
|  | { | 
|  | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
|  | unsigned long xfer_start = xfer_base + dev->mem_start; | 
|  |  | 
|  | if (xfer_start + count > ei_status.rmem_end) { | 
|  | /* We must wrap the input move. */ | 
|  | int semi_count = ei_status.rmem_end - xfer_start; | 
|  | memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, semi_count); | 
|  | count -= semi_count; | 
|  | memcpy_toio(skb->data + semi_count, (char *)ei_status.rmem_start, count); | 
|  | } else { | 
|  | memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, count); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void sane_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, int start_page) | 
|  | { | 
|  | long shmem = (start_page - WD_START_PG)<<8; | 
|  |  | 
|  | memcpy_toio((char *)dev->mem_start + shmem, buf, count); | 
|  | } | 
|  |  | 
|  | /* dayna block input/output */ | 
|  | static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) | 
|  | { | 
|  | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
|  |  | 
|  | dayna_memcpy_fromcard(dev, (void *)hdr, hdr_start, 4); | 
|  | /* Fix endianness */ | 
|  | hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8); | 
|  | } | 
|  |  | 
|  | static void dayna_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) | 
|  | { | 
|  | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
|  | unsigned long xfer_start = xfer_base+dev->mem_start; | 
|  |  | 
|  | /* Note the offset math is done in card memory space which is word | 
|  | per long onto our space. */ | 
|  |  | 
|  | if (xfer_start + count > ei_status.rmem_end) | 
|  | { | 
|  | /* We must wrap the input move. */ | 
|  | int semi_count = ei_status.rmem_end - xfer_start; | 
|  | dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count); | 
|  | count -= semi_count; | 
|  | dayna_memcpy_fromcard(dev, skb->data + semi_count, | 
|  | ei_status.rmem_start - dev->mem_start, | 
|  | count); | 
|  | } | 
|  | else | 
|  | { | 
|  | dayna_memcpy_fromcard(dev, skb->data, xfer_base, count); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void dayna_block_output(struct net_device *dev, int count, const unsigned char *buf, | 
|  | int start_page) | 
|  | { | 
|  | long shmem = (start_page - WD_START_PG)<<8; | 
|  |  | 
|  | dayna_memcpy_tocard(dev, shmem, buf, count); | 
|  | } | 
|  |  | 
|  | /* Cabletron block I/O */ | 
|  | static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, | 
|  | int ring_page) | 
|  | { | 
|  | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
|  | word_memcpy_fromcard((void *)hdr, (char *)dev->mem_start+hdr_start, 4); | 
|  | /* Register endianism - fix here rather than 8390.c */ | 
|  | hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8); | 
|  | } | 
|  |  | 
|  | static void slow_sane_block_input(struct net_device *dev, int count, struct sk_buff *skb, | 
|  | int ring_offset) | 
|  | { | 
|  | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
|  | unsigned long xfer_start = xfer_base+dev->mem_start; | 
|  |  | 
|  | if (xfer_start + count > ei_status.rmem_end) | 
|  | { | 
|  | /* We must wrap the input move. */ | 
|  | int semi_count = ei_status.rmem_end - xfer_start; | 
|  | word_memcpy_fromcard(skb->data, (char *)dev->mem_start + | 
|  | xfer_base, semi_count); | 
|  | count -= semi_count; | 
|  | word_memcpy_fromcard(skb->data + semi_count, | 
|  | (char *)ei_status.rmem_start, count); | 
|  | } | 
|  | else | 
|  | { | 
|  | word_memcpy_fromcard(skb->data, (char *)dev->mem_start + | 
|  | xfer_base, count); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf, | 
|  | int start_page) | 
|  | { | 
|  | long shmem = (start_page - WD_START_PG)<<8; | 
|  |  | 
|  | word_memcpy_tocard((char *)dev->mem_start + shmem, buf, count); | 
|  | } | 
|  |  | 
|  | static void word_memcpy_tocard(void *tp, const void *fp, int count) | 
|  | { | 
|  | volatile unsigned short *to = tp; | 
|  | const unsigned short *from = fp; | 
|  |  | 
|  | count++; | 
|  | count/=2; | 
|  |  | 
|  | while(count--) | 
|  | *to++=*from++; | 
|  | } | 
|  |  | 
|  | static void word_memcpy_fromcard(void *tp, const void *fp, int count) | 
|  | { | 
|  | unsigned short *to = tp; | 
|  | const volatile unsigned short *from = fp; | 
|  |  | 
|  | count++; | 
|  | count/=2; | 
|  |  | 
|  | while(count--) | 
|  | *to++=*from++; | 
|  | } | 
|  |  | 
|  |  |