|  | /* | 
|  | *  ahci.c - AHCI SATA support | 
|  | * | 
|  | *  Maintained by:  Jeff Garzik <jgarzik@pobox.com> | 
|  | *    		    Please ALWAYS copy linux-ide@vger.kernel.org | 
|  | *		    on emails. | 
|  | * | 
|  | *  Copyright 2004-2005 Red Hat, Inc. | 
|  | * | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2, or (at your option) | 
|  | *  any later version. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; see the file COPYING.  If not, write to | 
|  | *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | * | 
|  | * libata documentation is available via 'make {ps|pdf}docs', | 
|  | * as Documentation/DocBook/libata.* | 
|  | * | 
|  | * AHCI hardware documentation: | 
|  | * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf | 
|  | * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include "scsi.h" | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <linux/libata.h> | 
|  | #include <asm/io.h> | 
|  |  | 
|  | #define DRV_NAME	"ahci" | 
|  | #define DRV_VERSION	"1.01" | 
|  |  | 
|  |  | 
|  | enum { | 
|  | AHCI_PCI_BAR		= 5, | 
|  | AHCI_MAX_SG		= 168, /* hardware max is 64K */ | 
|  | AHCI_DMA_BOUNDARY	= 0xffffffff, | 
|  | AHCI_USE_CLUSTERING	= 0, | 
|  | AHCI_CMD_SLOT_SZ	= 32 * 32, | 
|  | AHCI_RX_FIS_SZ		= 256, | 
|  | AHCI_CMD_TBL_HDR	= 0x80, | 
|  | AHCI_CMD_TBL_CDB	= 0x40, | 
|  | AHCI_CMD_TBL_SZ		= AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16), | 
|  | AHCI_PORT_PRIV_DMA_SZ	= AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ + | 
|  | AHCI_RX_FIS_SZ, | 
|  | AHCI_IRQ_ON_SG		= (1 << 31), | 
|  | AHCI_CMD_ATAPI		= (1 << 5), | 
|  | AHCI_CMD_WRITE		= (1 << 6), | 
|  |  | 
|  | RX_FIS_D2H_REG		= 0x40,	/* offset of D2H Register FIS data */ | 
|  |  | 
|  | board_ahci		= 0, | 
|  |  | 
|  | /* global controller registers */ | 
|  | HOST_CAP		= 0x00, /* host capabilities */ | 
|  | HOST_CTL		= 0x04, /* global host control */ | 
|  | HOST_IRQ_STAT		= 0x08, /* interrupt status */ | 
|  | HOST_PORTS_IMPL		= 0x0c, /* bitmap of implemented ports */ | 
|  | HOST_VERSION		= 0x10, /* AHCI spec. version compliancy */ | 
|  |  | 
|  | /* HOST_CTL bits */ | 
|  | HOST_RESET		= (1 << 0),  /* reset controller; self-clear */ | 
|  | HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */ | 
|  | HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */ | 
|  |  | 
|  | /* HOST_CAP bits */ | 
|  | HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */ | 
|  |  | 
|  | /* registers for each SATA port */ | 
|  | PORT_LST_ADDR		= 0x00, /* command list DMA addr */ | 
|  | PORT_LST_ADDR_HI	= 0x04, /* command list DMA addr hi */ | 
|  | PORT_FIS_ADDR		= 0x08, /* FIS rx buf addr */ | 
|  | PORT_FIS_ADDR_HI	= 0x0c, /* FIS rx buf addr hi */ | 
|  | PORT_IRQ_STAT		= 0x10, /* interrupt status */ | 
|  | PORT_IRQ_MASK		= 0x14, /* interrupt enable/disable mask */ | 
|  | PORT_CMD		= 0x18, /* port command */ | 
|  | PORT_TFDATA		= 0x20,	/* taskfile data */ | 
|  | PORT_SIG		= 0x24,	/* device TF signature */ | 
|  | PORT_CMD_ISSUE		= 0x38, /* command issue */ | 
|  | PORT_SCR		= 0x28, /* SATA phy register block */ | 
|  | PORT_SCR_STAT		= 0x28, /* SATA phy register: SStatus */ | 
|  | PORT_SCR_CTL		= 0x2c, /* SATA phy register: SControl */ | 
|  | PORT_SCR_ERR		= 0x30, /* SATA phy register: SError */ | 
|  | PORT_SCR_ACT		= 0x34, /* SATA phy register: SActive */ | 
|  |  | 
|  | /* PORT_IRQ_{STAT,MASK} bits */ | 
|  | PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */ | 
|  | PORT_IRQ_TF_ERR		= (1 << 30), /* task file error */ | 
|  | PORT_IRQ_HBUS_ERR	= (1 << 29), /* host bus fatal error */ | 
|  | PORT_IRQ_HBUS_DATA_ERR	= (1 << 28), /* host bus data error */ | 
|  | PORT_IRQ_IF_ERR		= (1 << 27), /* interface fatal error */ | 
|  | PORT_IRQ_IF_NONFATAL	= (1 << 26), /* interface non-fatal error */ | 
|  | PORT_IRQ_OVERFLOW	= (1 << 24), /* xfer exhausted available S/G */ | 
|  | PORT_IRQ_BAD_PMP	= (1 << 23), /* incorrect port multiplier */ | 
|  |  | 
|  | PORT_IRQ_PHYRDY		= (1 << 22), /* PhyRdy changed */ | 
|  | PORT_IRQ_DEV_ILCK	= (1 << 7), /* device interlock */ | 
|  | PORT_IRQ_CONNECT	= (1 << 6), /* port connect change status */ | 
|  | PORT_IRQ_SG_DONE	= (1 << 5), /* descriptor processed */ | 
|  | PORT_IRQ_UNK_FIS	= (1 << 4), /* unknown FIS rx'd */ | 
|  | PORT_IRQ_SDB_FIS	= (1 << 3), /* Set Device Bits FIS rx'd */ | 
|  | PORT_IRQ_DMAS_FIS	= (1 << 2), /* DMA Setup FIS rx'd */ | 
|  | PORT_IRQ_PIOS_FIS	= (1 << 1), /* PIO Setup FIS rx'd */ | 
|  | PORT_IRQ_D2H_REG_FIS	= (1 << 0), /* D2H Register FIS rx'd */ | 
|  |  | 
|  | PORT_IRQ_FATAL		= PORT_IRQ_TF_ERR | | 
|  | PORT_IRQ_HBUS_ERR | | 
|  | PORT_IRQ_HBUS_DATA_ERR | | 
|  | PORT_IRQ_IF_ERR, | 
|  | DEF_PORT_IRQ		= PORT_IRQ_FATAL | PORT_IRQ_PHYRDY | | 
|  | PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE | | 
|  | PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS | | 
|  | PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS | | 
|  | PORT_IRQ_D2H_REG_FIS, | 
|  |  | 
|  | /* PORT_CMD bits */ | 
|  | PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */ | 
|  | PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */ | 
|  | PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */ | 
|  | PORT_CMD_POWER_ON	= (1 << 2), /* Power up device */ | 
|  | PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */ | 
|  | PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */ | 
|  |  | 
|  | PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */ | 
|  | PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */ | 
|  | PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */ | 
|  |  | 
|  | /* hpriv->flags bits */ | 
|  | AHCI_FLAG_MSI		= (1 << 0), | 
|  | }; | 
|  |  | 
|  | struct ahci_cmd_hdr { | 
|  | u32			opts; | 
|  | u32			status; | 
|  | u32			tbl_addr; | 
|  | u32			tbl_addr_hi; | 
|  | u32			reserved[4]; | 
|  | }; | 
|  |  | 
|  | struct ahci_sg { | 
|  | u32			addr; | 
|  | u32			addr_hi; | 
|  | u32			reserved; | 
|  | u32			flags_size; | 
|  | }; | 
|  |  | 
|  | struct ahci_host_priv { | 
|  | unsigned long		flags; | 
|  | u32			cap;	/* cache of HOST_CAP register */ | 
|  | u32			port_map; /* cache of HOST_PORTS_IMPL reg */ | 
|  | }; | 
|  |  | 
|  | struct ahci_port_priv { | 
|  | struct ahci_cmd_hdr	*cmd_slot; | 
|  | dma_addr_t		cmd_slot_dma; | 
|  | void			*cmd_tbl; | 
|  | dma_addr_t		cmd_tbl_dma; | 
|  | struct ahci_sg		*cmd_tbl_sg; | 
|  | void			*rx_fis; | 
|  | dma_addr_t		rx_fis_dma; | 
|  | }; | 
|  |  | 
|  | static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg); | 
|  | static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); | 
|  | static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); | 
|  | static int ahci_qc_issue(struct ata_queued_cmd *qc); | 
|  | static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); | 
|  | static void ahci_phy_reset(struct ata_port *ap); | 
|  | static void ahci_irq_clear(struct ata_port *ap); | 
|  | static void ahci_eng_timeout(struct ata_port *ap); | 
|  | static int ahci_port_start(struct ata_port *ap); | 
|  | static void ahci_port_stop(struct ata_port *ap); | 
|  | static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); | 
|  | static void ahci_qc_prep(struct ata_queued_cmd *qc); | 
|  | static u8 ahci_check_status(struct ata_port *ap); | 
|  | static u8 ahci_check_err(struct ata_port *ap); | 
|  | static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); | 
|  | static void ahci_remove_one (struct pci_dev *pdev); | 
|  |  | 
|  | static Scsi_Host_Template ahci_sht = { | 
|  | .module			= THIS_MODULE, | 
|  | .name			= DRV_NAME, | 
|  | .ioctl			= ata_scsi_ioctl, | 
|  | .queuecommand		= ata_scsi_queuecmd, | 
|  | .eh_strategy_handler	= ata_scsi_error, | 
|  | .can_queue		= ATA_DEF_QUEUE, | 
|  | .this_id		= ATA_SHT_THIS_ID, | 
|  | .sg_tablesize		= AHCI_MAX_SG, | 
|  | .max_sectors		= ATA_MAX_SECTORS, | 
|  | .cmd_per_lun		= ATA_SHT_CMD_PER_LUN, | 
|  | .emulated		= ATA_SHT_EMULATED, | 
|  | .use_clustering		= AHCI_USE_CLUSTERING, | 
|  | .proc_name		= DRV_NAME, | 
|  | .dma_boundary		= AHCI_DMA_BOUNDARY, | 
|  | .slave_configure	= ata_scsi_slave_config, | 
|  | .bios_param		= ata_std_bios_param, | 
|  | .ordered_flush		= 1, | 
|  | }; | 
|  |  | 
|  | static const struct ata_port_operations ahci_ops = { | 
|  | .port_disable		= ata_port_disable, | 
|  |  | 
|  | .check_status		= ahci_check_status, | 
|  | .check_altstatus	= ahci_check_status, | 
|  | .check_err		= ahci_check_err, | 
|  | .dev_select		= ata_noop_dev_select, | 
|  |  | 
|  | .tf_read		= ahci_tf_read, | 
|  |  | 
|  | .phy_reset		= ahci_phy_reset, | 
|  |  | 
|  | .qc_prep		= ahci_qc_prep, | 
|  | .qc_issue		= ahci_qc_issue, | 
|  |  | 
|  | .eng_timeout		= ahci_eng_timeout, | 
|  |  | 
|  | .irq_handler		= ahci_interrupt, | 
|  | .irq_clear		= ahci_irq_clear, | 
|  |  | 
|  | .scr_read		= ahci_scr_read, | 
|  | .scr_write		= ahci_scr_write, | 
|  |  | 
|  | .port_start		= ahci_port_start, | 
|  | .port_stop		= ahci_port_stop, | 
|  | }; | 
|  |  | 
|  | static struct ata_port_info ahci_port_info[] = { | 
|  | /* board_ahci */ | 
|  | { | 
|  | .sht		= &ahci_sht, | 
|  | .host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | | 
|  | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | | 
|  | ATA_FLAG_PIO_DMA, | 
|  | .pio_mask	= 0x1f, /* pio0-4 */ | 
|  | .udma_mask	= 0x7f, /* udma0-6 ; FIXME */ | 
|  | .port_ops	= &ahci_ops, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct pci_device_id ahci_pci_tbl[] = { | 
|  | { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ICH6 */ | 
|  | { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ICH6M */ | 
|  | { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ICH7 */ | 
|  | { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ICH7M */ | 
|  | { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ICH7R */ | 
|  | { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ULi M5288 */ | 
|  | { PCI_VENDOR_ID_INTEL, 0x2681, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ESB2 */ | 
|  | { PCI_VENDOR_ID_INTEL, 0x2682, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ESB2 */ | 
|  | { PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ESB2 */ | 
|  | { PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | board_ahci }, /* ICH7-M DH */ | 
|  | { }	/* terminate list */ | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct pci_driver ahci_pci_driver = { | 
|  | .name			= DRV_NAME, | 
|  | .id_table		= ahci_pci_tbl, | 
|  | .probe			= ahci_init_one, | 
|  | .remove			= ahci_remove_one, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port) | 
|  | { | 
|  | return base + 0x100 + (port * 0x80); | 
|  | } | 
|  |  | 
|  | static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int port) | 
|  | { | 
|  | return (void __iomem *) ahci_port_base_ul((unsigned long)base, port); | 
|  | } | 
|  |  | 
|  | static int ahci_port_start(struct ata_port *ap) | 
|  | { | 
|  | struct device *dev = ap->host_set->dev; | 
|  | struct ahci_host_priv *hpriv = ap->host_set->private_data; | 
|  | struct ahci_port_priv *pp; | 
|  | void __iomem *mmio = ap->host_set->mmio_base; | 
|  | void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | 
|  | void *mem; | 
|  | dma_addr_t mem_dma; | 
|  |  | 
|  | pp = kmalloc(sizeof(*pp), GFP_KERNEL); | 
|  | if (!pp) | 
|  | return -ENOMEM; | 
|  | memset(pp, 0, sizeof(*pp)); | 
|  |  | 
|  | mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); | 
|  | if (!mem) { | 
|  | kfree(pp); | 
|  | return -ENOMEM; | 
|  | } | 
|  | memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); | 
|  |  | 
|  | /* | 
|  | * First item in chunk of DMA memory: 32-slot command table, | 
|  | * 32 bytes each in size | 
|  | */ | 
|  | pp->cmd_slot = mem; | 
|  | pp->cmd_slot_dma = mem_dma; | 
|  |  | 
|  | mem += AHCI_CMD_SLOT_SZ; | 
|  | mem_dma += AHCI_CMD_SLOT_SZ; | 
|  |  | 
|  | /* | 
|  | * Second item: Received-FIS area | 
|  | */ | 
|  | pp->rx_fis = mem; | 
|  | pp->rx_fis_dma = mem_dma; | 
|  |  | 
|  | mem += AHCI_RX_FIS_SZ; | 
|  | mem_dma += AHCI_RX_FIS_SZ; | 
|  |  | 
|  | /* | 
|  | * Third item: data area for storing a single command | 
|  | * and its scatter-gather table | 
|  | */ | 
|  | pp->cmd_tbl = mem; | 
|  | pp->cmd_tbl_dma = mem_dma; | 
|  |  | 
|  | pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR; | 
|  |  | 
|  | ap->private_data = pp; | 
|  |  | 
|  | if (hpriv->cap & HOST_CAP_64) | 
|  | writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); | 
|  | writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); | 
|  | readl(port_mmio + PORT_LST_ADDR); /* flush */ | 
|  |  | 
|  | if (hpriv->cap & HOST_CAP_64) | 
|  | writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); | 
|  | writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); | 
|  | readl(port_mmio + PORT_FIS_ADDR); /* flush */ | 
|  |  | 
|  | writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | | 
|  | PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | | 
|  | PORT_CMD_START, port_mmio + PORT_CMD); | 
|  | readl(port_mmio + PORT_CMD); /* flush */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ahci_port_stop(struct ata_port *ap) | 
|  | { | 
|  | struct device *dev = ap->host_set->dev; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | void __iomem *mmio = ap->host_set->mmio_base; | 
|  | void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | 
|  | u32 tmp; | 
|  |  | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX); | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  | readl(port_mmio + PORT_CMD); /* flush */ | 
|  |  | 
|  | /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so | 
|  | * this is slightly incorrect. | 
|  | */ | 
|  | msleep(500); | 
|  |  | 
|  | ap->private_data = NULL; | 
|  | dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, | 
|  | pp->cmd_slot, pp->cmd_slot_dma); | 
|  | kfree(pp); | 
|  | } | 
|  |  | 
|  | static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) | 
|  | { | 
|  | unsigned int sc_reg; | 
|  |  | 
|  | switch (sc_reg_in) { | 
|  | case SCR_STATUS:	sc_reg = 0; break; | 
|  | case SCR_CONTROL:	sc_reg = 1; break; | 
|  | case SCR_ERROR:		sc_reg = 2; break; | 
|  | case SCR_ACTIVE:	sc_reg = 3; break; | 
|  | default: | 
|  | return 0xffffffffU; | 
|  | } | 
|  |  | 
|  | return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, | 
|  | u32 val) | 
|  | { | 
|  | unsigned int sc_reg; | 
|  |  | 
|  | switch (sc_reg_in) { | 
|  | case SCR_STATUS:	sc_reg = 0; break; | 
|  | case SCR_CONTROL:	sc_reg = 1; break; | 
|  | case SCR_ERROR:		sc_reg = 2; break; | 
|  | case SCR_ACTIVE:	sc_reg = 3; break; | 
|  | default: | 
|  | return; | 
|  | } | 
|  |  | 
|  | writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); | 
|  | } | 
|  |  | 
|  | static void ahci_phy_reset(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; | 
|  | struct ata_taskfile tf; | 
|  | struct ata_device *dev = &ap->device[0]; | 
|  | u32 tmp; | 
|  |  | 
|  | __sata_phy_reset(ap); | 
|  |  | 
|  | if (ap->flags & ATA_FLAG_PORT_DISABLED) | 
|  | return; | 
|  |  | 
|  | tmp = readl(port_mmio + PORT_SIG); | 
|  | tf.lbah		= (tmp >> 24)	& 0xff; | 
|  | tf.lbam		= (tmp >> 16)	& 0xff; | 
|  | tf.lbal		= (tmp >> 8)	& 0xff; | 
|  | tf.nsect	= (tmp)		& 0xff; | 
|  |  | 
|  | dev->class = ata_dev_classify(&tf); | 
|  | if (!ata_dev_present(dev)) | 
|  | ata_port_disable(ap); | 
|  | } | 
|  |  | 
|  | static u8 ahci_check_status(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; | 
|  |  | 
|  | return readl(mmio + PORT_TFDATA) & 0xFF; | 
|  | } | 
|  |  | 
|  | static u8 ahci_check_err(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; | 
|  |  | 
|  | return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF; | 
|  | } | 
|  |  | 
|  | static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) | 
|  | { | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | 
|  |  | 
|  | ata_tf_from_fis(d2h_fis, tf); | 
|  | } | 
|  |  | 
|  | static void ahci_fill_sg(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ahci_port_priv *pp = qc->ap->private_data; | 
|  | unsigned int i; | 
|  |  | 
|  | VPRINTK("ENTER\n"); | 
|  |  | 
|  | /* | 
|  | * Next, the S/G list. | 
|  | */ | 
|  | for (i = 0; i < qc->n_elem; i++) { | 
|  | u32 sg_len; | 
|  | dma_addr_t addr; | 
|  |  | 
|  | addr = sg_dma_address(&qc->sg[i]); | 
|  | sg_len = sg_dma_len(&qc->sg[i]); | 
|  |  | 
|  | pp->cmd_tbl_sg[i].addr = cpu_to_le32(addr & 0xffffffff); | 
|  | pp->cmd_tbl_sg[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); | 
|  | pp->cmd_tbl_sg[i].flags_size = cpu_to_le32(sg_len - 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ahci_qc_prep(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ata_port *ap = qc->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | u32 opts; | 
|  | const u32 cmd_fis_len = 5; /* five dwords */ | 
|  |  | 
|  | /* | 
|  | * Fill in command slot information (currently only one slot, | 
|  | * slot 0, is currently since we don't do queueing) | 
|  | */ | 
|  |  | 
|  | opts = (qc->n_elem << 16) | cmd_fis_len; | 
|  | if (qc->tf.flags & ATA_TFLAG_WRITE) | 
|  | opts |= AHCI_CMD_WRITE; | 
|  | if (is_atapi_taskfile(&qc->tf)) | 
|  | opts |= AHCI_CMD_ATAPI; | 
|  |  | 
|  | pp->cmd_slot[0].opts = cpu_to_le32(opts); | 
|  | pp->cmd_slot[0].status = 0; | 
|  | pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); | 
|  | pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); | 
|  |  | 
|  | /* | 
|  | * Fill in command table information.  First, the header, | 
|  | * a SATA Register - Host to Device command FIS. | 
|  | */ | 
|  | ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0); | 
|  | if (opts & AHCI_CMD_ATAPI) { | 
|  | memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); | 
|  | memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, ap->cdb_len); | 
|  | } | 
|  |  | 
|  | if (!(qc->flags & ATA_QCFLAG_DMAMAP)) | 
|  | return; | 
|  |  | 
|  | ahci_fill_sg(qc); | 
|  | } | 
|  |  | 
|  | static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) | 
|  | { | 
|  | void __iomem *mmio = ap->host_set->mmio_base; | 
|  | void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | 
|  | u32 tmp; | 
|  | int work; | 
|  |  | 
|  | /* stop DMA */ | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | tmp &= ~PORT_CMD_START; | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  |  | 
|  | /* wait for engine to stop.  TODO: this could be | 
|  | * as long as 500 msec | 
|  | */ | 
|  | work = 1000; | 
|  | while (work-- > 0) { | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | if ((tmp & PORT_CMD_LIST_ON) == 0) | 
|  | break; | 
|  | udelay(10); | 
|  | } | 
|  |  | 
|  | /* clear SATA phy error, if any */ | 
|  | tmp = readl(port_mmio + PORT_SCR_ERR); | 
|  | writel(tmp, port_mmio + PORT_SCR_ERR); | 
|  |  | 
|  | /* if DRQ/BSY is set, device needs to be reset. | 
|  | * if so, issue COMRESET | 
|  | */ | 
|  | tmp = readl(port_mmio + PORT_TFDATA); | 
|  | if (tmp & (ATA_BUSY | ATA_DRQ)) { | 
|  | writel(0x301, port_mmio + PORT_SCR_CTL); | 
|  | readl(port_mmio + PORT_SCR_CTL); /* flush */ | 
|  | udelay(10); | 
|  | writel(0x300, port_mmio + PORT_SCR_CTL); | 
|  | readl(port_mmio + PORT_SCR_CTL); /* flush */ | 
|  | } | 
|  |  | 
|  | /* re-start DMA */ | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | tmp |= PORT_CMD_START; | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  | readl(port_mmio + PORT_CMD); /* flush */ | 
|  |  | 
|  | printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->id); | 
|  | } | 
|  |  | 
|  | static void ahci_eng_timeout(struct ata_port *ap) | 
|  | { | 
|  | struct ata_host_set *host_set = ap->host_set; | 
|  | void __iomem *mmio = host_set->mmio_base; | 
|  | void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | 
|  | struct ata_queued_cmd *qc; | 
|  | unsigned long flags; | 
|  |  | 
|  | DPRINTK("ENTER\n"); | 
|  |  | 
|  | spin_lock_irqsave(&host_set->lock, flags); | 
|  |  | 
|  | ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT)); | 
|  |  | 
|  | qc = ata_qc_from_tag(ap, ap->active_tag); | 
|  | if (!qc) { | 
|  | printk(KERN_ERR "ata%u: BUG: timeout without command\n", | 
|  | ap->id); | 
|  | } else { | 
|  | /* hack alert!  We cannot use the supplied completion | 
|  | * function from inside the ->eh_strategy_handler() thread. | 
|  | * libata is the only user of ->eh_strategy_handler() in | 
|  | * any kernel, so the default scsi_done() assumes it is | 
|  | * not being called from the SCSI EH. | 
|  | */ | 
|  | qc->scsidone = scsi_finish_command; | 
|  | ata_qc_complete(qc, ATA_ERR); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&host_set->lock, flags); | 
|  | } | 
|  |  | 
|  | static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) | 
|  | { | 
|  | void __iomem *mmio = ap->host_set->mmio_base; | 
|  | void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | 
|  | u32 status, serr, ci; | 
|  |  | 
|  | serr = readl(port_mmio + PORT_SCR_ERR); | 
|  | writel(serr, port_mmio + PORT_SCR_ERR); | 
|  |  | 
|  | status = readl(port_mmio + PORT_IRQ_STAT); | 
|  | writel(status, port_mmio + PORT_IRQ_STAT); | 
|  |  | 
|  | ci = readl(port_mmio + PORT_CMD_ISSUE); | 
|  | if (likely((ci & 0x1) == 0)) { | 
|  | if (qc) { | 
|  | ata_qc_complete(qc, 0); | 
|  | qc = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (status & PORT_IRQ_FATAL) { | 
|  | ahci_intr_error(ap, status); | 
|  | if (qc) | 
|  | ata_qc_complete(qc, ATA_ERR); | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void ahci_irq_clear(struct ata_port *ap) | 
|  | { | 
|  | /* TODO */ | 
|  | } | 
|  |  | 
|  | static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs) | 
|  | { | 
|  | struct ata_host_set *host_set = dev_instance; | 
|  | struct ahci_host_priv *hpriv; | 
|  | unsigned int i, handled = 0; | 
|  | void __iomem *mmio; | 
|  | u32 irq_stat, irq_ack = 0; | 
|  |  | 
|  | VPRINTK("ENTER\n"); | 
|  |  | 
|  | hpriv = host_set->private_data; | 
|  | mmio = host_set->mmio_base; | 
|  |  | 
|  | /* sigh.  0xffffffff is a valid return from h/w */ | 
|  | irq_stat = readl(mmio + HOST_IRQ_STAT); | 
|  | irq_stat &= hpriv->port_map; | 
|  | if (!irq_stat) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | spin_lock(&host_set->lock); | 
|  |  | 
|  | for (i = 0; i < host_set->n_ports; i++) { | 
|  | struct ata_port *ap; | 
|  |  | 
|  | if (!(irq_stat & (1 << i))) | 
|  | continue; | 
|  |  | 
|  | ap = host_set->ports[i]; | 
|  | if (ap) { | 
|  | struct ata_queued_cmd *qc; | 
|  | qc = ata_qc_from_tag(ap, ap->active_tag); | 
|  | if (!ahci_host_intr(ap, qc)) | 
|  | if (ata_ratelimit()) { | 
|  | struct pci_dev *pdev = | 
|  | to_pci_dev(ap->host_set->dev); | 
|  | printk(KERN_WARNING | 
|  | "ahci(%s): unhandled interrupt on port %u\n", | 
|  | pci_name(pdev), i); | 
|  | } | 
|  |  | 
|  | VPRINTK("port %u\n", i); | 
|  | } else { | 
|  | VPRINTK("port %u (no irq)\n", i); | 
|  | if (ata_ratelimit()) { | 
|  | struct pci_dev *pdev = | 
|  | to_pci_dev(ap->host_set->dev); | 
|  | printk(KERN_WARNING | 
|  | "ahci(%s): interrupt on disabled port %u\n", | 
|  | pci_name(pdev), i); | 
|  | } | 
|  | } | 
|  |  | 
|  | irq_ack |= (1 << i); | 
|  | } | 
|  |  | 
|  | if (irq_ack) { | 
|  | writel(irq_ack, mmio + HOST_IRQ_STAT); | 
|  | handled = 1; | 
|  | } | 
|  |  | 
|  | spin_unlock(&host_set->lock); | 
|  |  | 
|  | VPRINTK("EXIT\n"); | 
|  |  | 
|  | return IRQ_RETVAL(handled); | 
|  | } | 
|  |  | 
|  | static int ahci_qc_issue(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ata_port *ap = qc->ap; | 
|  | void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; | 
|  |  | 
|  | writel(1, port_mmio + PORT_CMD_ISSUE); | 
|  | readl(port_mmio + PORT_CMD_ISSUE);	/* flush */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ahci_setup_port(struct ata_ioports *port, unsigned long base, | 
|  | unsigned int port_idx) | 
|  | { | 
|  | VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx); | 
|  | base = ahci_port_base_ul(base, port_idx); | 
|  | VPRINTK("base now==0x%lx\n", base); | 
|  |  | 
|  | port->cmd_addr		= base; | 
|  | port->scr_addr		= base + PORT_SCR; | 
|  |  | 
|  | VPRINTK("EXIT\n"); | 
|  | } | 
|  |  | 
|  | static int ahci_host_init(struct ata_probe_ent *probe_ent) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = probe_ent->private_data; | 
|  | struct pci_dev *pdev = to_pci_dev(probe_ent->dev); | 
|  | void __iomem *mmio = probe_ent->mmio_base; | 
|  | u32 tmp, cap_save; | 
|  | u16 tmp16; | 
|  | unsigned int i, j, using_dac; | 
|  | int rc; | 
|  | void __iomem *port_mmio; | 
|  |  | 
|  | cap_save = readl(mmio + HOST_CAP); | 
|  | cap_save &= ( (1<<28) | (1<<17) ); | 
|  | cap_save |= (1 << 27); | 
|  |  | 
|  | /* global controller reset */ | 
|  | tmp = readl(mmio + HOST_CTL); | 
|  | if ((tmp & HOST_RESET) == 0) { | 
|  | writel(tmp | HOST_RESET, mmio + HOST_CTL); | 
|  | readl(mmio + HOST_CTL); /* flush */ | 
|  | } | 
|  |  | 
|  | /* reset must complete within 1 second, or | 
|  | * the hardware should be considered fried. | 
|  | */ | 
|  | ssleep(1); | 
|  |  | 
|  | tmp = readl(mmio + HOST_CTL); | 
|  | if (tmp & HOST_RESET) { | 
|  | printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n", | 
|  | pci_name(pdev), tmp); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | writel(HOST_AHCI_EN, mmio + HOST_CTL); | 
|  | (void) readl(mmio + HOST_CTL);	/* flush */ | 
|  | writel(cap_save, mmio + HOST_CAP); | 
|  | writel(0xf, mmio + HOST_PORTS_IMPL); | 
|  | (void) readl(mmio + HOST_PORTS_IMPL);	/* flush */ | 
|  |  | 
|  | pci_read_config_word(pdev, 0x92, &tmp16); | 
|  | tmp16 |= 0xf; | 
|  | pci_write_config_word(pdev, 0x92, tmp16); | 
|  |  | 
|  | hpriv->cap = readl(mmio + HOST_CAP); | 
|  | hpriv->port_map = readl(mmio + HOST_PORTS_IMPL); | 
|  | probe_ent->n_ports = (hpriv->cap & 0x1f) + 1; | 
|  |  | 
|  | VPRINTK("cap 0x%x  port_map 0x%x  n_ports %d\n", | 
|  | hpriv->cap, hpriv->port_map, probe_ent->n_ports); | 
|  |  | 
|  | using_dac = hpriv->cap & HOST_CAP_64; | 
|  | if (using_dac && | 
|  | !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { | 
|  | rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); | 
|  | if (rc) { | 
|  | rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); | 
|  | if (rc) { | 
|  | printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n", | 
|  | pci_name(pdev)); | 
|  | return rc; | 
|  | } | 
|  | } | 
|  | } else { | 
|  | rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); | 
|  | if (rc) { | 
|  | printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n", | 
|  | pci_name(pdev)); | 
|  | return rc; | 
|  | } | 
|  | rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); | 
|  | if (rc) { | 
|  | printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n", | 
|  | pci_name(pdev)); | 
|  | return rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < probe_ent->n_ports; i++) { | 
|  | #if 0 /* BIOSen initialize this incorrectly */ | 
|  | if (!(hpriv->port_map & (1 << i))) | 
|  | continue; | 
|  | #endif | 
|  |  | 
|  | port_mmio = ahci_port_base(mmio, i); | 
|  | VPRINTK("mmio %p  port_mmio %p\n", mmio, port_mmio); | 
|  |  | 
|  | ahci_setup_port(&probe_ent->port[i], | 
|  | (unsigned long) mmio, i); | 
|  |  | 
|  | /* make sure port is not active */ | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | VPRINTK("PORT_CMD 0x%x\n", tmp); | 
|  | if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | | 
|  | PORT_CMD_FIS_RX | PORT_CMD_START)) { | 
|  | tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | | 
|  | PORT_CMD_FIS_RX | PORT_CMD_START); | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  | readl(port_mmio + PORT_CMD); /* flush */ | 
|  |  | 
|  | /* spec says 500 msecs for each bit, so | 
|  | * this is slightly incorrect. | 
|  | */ | 
|  | msleep(500); | 
|  | } | 
|  |  | 
|  | writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD); | 
|  |  | 
|  | j = 0; | 
|  | while (j < 100) { | 
|  | msleep(10); | 
|  | tmp = readl(port_mmio + PORT_SCR_STAT); | 
|  | if ((tmp & 0xf) == 0x3) | 
|  | break; | 
|  | j++; | 
|  | } | 
|  |  | 
|  | tmp = readl(port_mmio + PORT_SCR_ERR); | 
|  | VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); | 
|  | writel(tmp, port_mmio + PORT_SCR_ERR); | 
|  |  | 
|  | /* ack any pending irq events for this port */ | 
|  | tmp = readl(port_mmio + PORT_IRQ_STAT); | 
|  | VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); | 
|  | if (tmp) | 
|  | writel(tmp, port_mmio + PORT_IRQ_STAT); | 
|  |  | 
|  | writel(1 << i, mmio + HOST_IRQ_STAT); | 
|  |  | 
|  | /* set irq mask (enables interrupts) */ | 
|  | writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); | 
|  | } | 
|  |  | 
|  | tmp = readl(mmio + HOST_CTL); | 
|  | VPRINTK("HOST_CTL 0x%x\n", tmp); | 
|  | writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); | 
|  | tmp = readl(mmio + HOST_CTL); | 
|  | VPRINTK("HOST_CTL 0x%x\n", tmp); | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ahci_print_info(struct ata_probe_ent *probe_ent) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = probe_ent->private_data; | 
|  | struct pci_dev *pdev = to_pci_dev(probe_ent->dev); | 
|  | void __iomem *mmio = probe_ent->mmio_base; | 
|  | u32 vers, cap, impl, speed; | 
|  | const char *speed_s; | 
|  | u16 cc; | 
|  | const char *scc_s; | 
|  |  | 
|  | vers = readl(mmio + HOST_VERSION); | 
|  | cap = hpriv->cap; | 
|  | impl = hpriv->port_map; | 
|  |  | 
|  | speed = (cap >> 20) & 0xf; | 
|  | if (speed == 1) | 
|  | speed_s = "1.5"; | 
|  | else if (speed == 2) | 
|  | speed_s = "3"; | 
|  | else | 
|  | speed_s = "?"; | 
|  |  | 
|  | pci_read_config_word(pdev, 0x0a, &cc); | 
|  | if (cc == 0x0101) | 
|  | scc_s = "IDE"; | 
|  | else if (cc == 0x0106) | 
|  | scc_s = "SATA"; | 
|  | else if (cc == 0x0104) | 
|  | scc_s = "RAID"; | 
|  | else | 
|  | scc_s = "unknown"; | 
|  |  | 
|  | printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x " | 
|  | "%u slots %u ports %s Gbps 0x%x impl %s mode\n" | 
|  | , | 
|  | pci_name(pdev), | 
|  |  | 
|  | (vers >> 24) & 0xff, | 
|  | (vers >> 16) & 0xff, | 
|  | (vers >> 8) & 0xff, | 
|  | vers & 0xff, | 
|  |  | 
|  | ((cap >> 8) & 0x1f) + 1, | 
|  | (cap & 0x1f) + 1, | 
|  | speed_s, | 
|  | impl, | 
|  | scc_s); | 
|  |  | 
|  | printk(KERN_INFO DRV_NAME "(%s) flags: " | 
|  | "%s%s%s%s%s%s" | 
|  | "%s%s%s%s%s%s%s\n" | 
|  | , | 
|  | pci_name(pdev), | 
|  |  | 
|  | cap & (1 << 31) ? "64bit " : "", | 
|  | cap & (1 << 30) ? "ncq " : "", | 
|  | cap & (1 << 28) ? "ilck " : "", | 
|  | cap & (1 << 27) ? "stag " : "", | 
|  | cap & (1 << 26) ? "pm " : "", | 
|  | cap & (1 << 25) ? "led " : "", | 
|  |  | 
|  | cap & (1 << 24) ? "clo " : "", | 
|  | cap & (1 << 19) ? "nz " : "", | 
|  | cap & (1 << 18) ? "only " : "", | 
|  | cap & (1 << 17) ? "pmp " : "", | 
|  | cap & (1 << 15) ? "pio " : "", | 
|  | cap & (1 << 14) ? "slum " : "", | 
|  | cap & (1 << 13) ? "part " : "" | 
|  | ); | 
|  | } | 
|  |  | 
|  | static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) | 
|  | { | 
|  | static int printed_version; | 
|  | struct ata_probe_ent *probe_ent = NULL; | 
|  | struct ahci_host_priv *hpriv; | 
|  | unsigned long base; | 
|  | void __iomem *mmio_base; | 
|  | unsigned int board_idx = (unsigned int) ent->driver_data; | 
|  | int have_msi, pci_dev_busy = 0; | 
|  | int rc; | 
|  |  | 
|  | VPRINTK("ENTER\n"); | 
|  |  | 
|  | if (!printed_version++) | 
|  | printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); | 
|  |  | 
|  | rc = pci_enable_device(pdev); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | rc = pci_request_regions(pdev, DRV_NAME); | 
|  | if (rc) { | 
|  | pci_dev_busy = 1; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | if (pci_enable_msi(pdev) == 0) | 
|  | have_msi = 1; | 
|  | else { | 
|  | pci_intx(pdev, 1); | 
|  | have_msi = 0; | 
|  | } | 
|  |  | 
|  | probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); | 
|  | if (probe_ent == NULL) { | 
|  | rc = -ENOMEM; | 
|  | goto err_out_msi; | 
|  | } | 
|  |  | 
|  | memset(probe_ent, 0, sizeof(*probe_ent)); | 
|  | probe_ent->dev = pci_dev_to_dev(pdev); | 
|  | INIT_LIST_HEAD(&probe_ent->node); | 
|  |  | 
|  | mmio_base = pci_iomap(pdev, AHCI_PCI_BAR, 0); | 
|  | if (mmio_base == NULL) { | 
|  | rc = -ENOMEM; | 
|  | goto err_out_free_ent; | 
|  | } | 
|  | base = (unsigned long) mmio_base; | 
|  |  | 
|  | hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); | 
|  | if (!hpriv) { | 
|  | rc = -ENOMEM; | 
|  | goto err_out_iounmap; | 
|  | } | 
|  | memset(hpriv, 0, sizeof(*hpriv)); | 
|  |  | 
|  | probe_ent->sht		= ahci_port_info[board_idx].sht; | 
|  | probe_ent->host_flags	= ahci_port_info[board_idx].host_flags; | 
|  | probe_ent->pio_mask	= ahci_port_info[board_idx].pio_mask; | 
|  | probe_ent->udma_mask	= ahci_port_info[board_idx].udma_mask; | 
|  | probe_ent->port_ops	= ahci_port_info[board_idx].port_ops; | 
|  |  | 
|  | probe_ent->irq = pdev->irq; | 
|  | probe_ent->irq_flags = SA_SHIRQ; | 
|  | probe_ent->mmio_base = mmio_base; | 
|  | probe_ent->private_data = hpriv; | 
|  |  | 
|  | if (have_msi) | 
|  | hpriv->flags |= AHCI_FLAG_MSI; | 
|  |  | 
|  | /* initialize adapter */ | 
|  | rc = ahci_host_init(probe_ent); | 
|  | if (rc) | 
|  | goto err_out_hpriv; | 
|  |  | 
|  | ahci_print_info(probe_ent); | 
|  |  | 
|  | /* FIXME: check ata_device_add return value */ | 
|  | ata_device_add(probe_ent); | 
|  | kfree(probe_ent); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_out_hpriv: | 
|  | kfree(hpriv); | 
|  | err_out_iounmap: | 
|  | pci_iounmap(pdev, mmio_base); | 
|  | err_out_free_ent: | 
|  | kfree(probe_ent); | 
|  | err_out_msi: | 
|  | if (have_msi) | 
|  | pci_disable_msi(pdev); | 
|  | else | 
|  | pci_intx(pdev, 0); | 
|  | pci_release_regions(pdev); | 
|  | err_out: | 
|  | if (!pci_dev_busy) | 
|  | pci_disable_device(pdev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void ahci_remove_one (struct pci_dev *pdev) | 
|  | { | 
|  | struct device *dev = pci_dev_to_dev(pdev); | 
|  | struct ata_host_set *host_set = dev_get_drvdata(dev); | 
|  | struct ahci_host_priv *hpriv = host_set->private_data; | 
|  | struct ata_port *ap; | 
|  | unsigned int i; | 
|  | int have_msi; | 
|  |  | 
|  | for (i = 0; i < host_set->n_ports; i++) { | 
|  | ap = host_set->ports[i]; | 
|  |  | 
|  | scsi_remove_host(ap->host); | 
|  | } | 
|  |  | 
|  | have_msi = hpriv->flags & AHCI_FLAG_MSI; | 
|  | free_irq(host_set->irq, host_set); | 
|  |  | 
|  | for (i = 0; i < host_set->n_ports; i++) { | 
|  | ap = host_set->ports[i]; | 
|  |  | 
|  | ata_scsi_release(ap->host); | 
|  | scsi_host_put(ap->host); | 
|  | } | 
|  |  | 
|  | kfree(hpriv); | 
|  | pci_iounmap(pdev, host_set->mmio_base); | 
|  | kfree(host_set); | 
|  |  | 
|  | if (have_msi) | 
|  | pci_disable_msi(pdev); | 
|  | else | 
|  | pci_intx(pdev, 0); | 
|  | pci_release_regions(pdev); | 
|  | pci_disable_device(pdev); | 
|  | dev_set_drvdata(dev, NULL); | 
|  | } | 
|  |  | 
|  | static int __init ahci_init(void) | 
|  | { | 
|  | return pci_module_init(&ahci_pci_driver); | 
|  | } | 
|  |  | 
|  | static void __exit ahci_exit(void) | 
|  | { | 
|  | pci_unregister_driver(&ahci_pci_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Jeff Garzik"); | 
|  | MODULE_DESCRIPTION("AHCI SATA low-level driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  |  | 
|  | module_init(ahci_init); | 
|  | module_exit(ahci_exit); |