| /****************************************************************************** | 
 |  * | 
 |  * Module Name: nsload - namespace loading/expanding/contracting procedures | 
 |  * | 
 |  *****************************************************************************/ | 
 |  | 
 | /* | 
 |  * Copyright (C) 2000 - 2006, R. Byron Moore | 
 |  * All rights reserved. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions, and the following disclaimer, | 
 |  *    without modification. | 
 |  * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
 |  *    substantially similar to the "NO WARRANTY" disclaimer below | 
 |  *    ("Disclaimer") and any redistribution must be conditioned upon | 
 |  *    including a substantially similar Disclaimer requirement for further | 
 |  *    binary redistribution. | 
 |  * 3. Neither the names of the above-listed copyright holders nor the names | 
 |  *    of any contributors may be used to endorse or promote products derived | 
 |  *    from this software without specific prior written permission. | 
 |  * | 
 |  * Alternatively, this software may be distributed under the terms of the | 
 |  * GNU General Public License ("GPL") version 2 as published by the Free | 
 |  * Software Foundation. | 
 |  * | 
 |  * NO WARRANTY | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
 |  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
 |  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
 |  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
 |  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
 |  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
 |  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
 |  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
 |  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
 |  * POSSIBILITY OF SUCH DAMAGES. | 
 |  */ | 
 |  | 
 | #include <acpi/acpi.h> | 
 | #include <acpi/acnamesp.h> | 
 | #include <acpi/acdispat.h> | 
 |  | 
 | #define _COMPONENT          ACPI_NAMESPACE | 
 | ACPI_MODULE_NAME("nsload") | 
 |  | 
 | /* Local prototypes */ | 
 | static acpi_status acpi_ns_load_table_by_type(acpi_table_type table_type); | 
 |  | 
 | #ifdef ACPI_FUTURE_IMPLEMENTATION | 
 | acpi_status acpi_ns_unload_namespace(acpi_handle handle); | 
 |  | 
 | static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle); | 
 | #endif | 
 |  | 
 | #ifndef ACPI_NO_METHOD_EXECUTION | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_load_table | 
 |  * | 
 |  * PARAMETERS:  table_desc      - Descriptor for table to be loaded | 
 |  *              Node            - Owning NS node | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Load one ACPI table into the namespace | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_ns_load_table(struct acpi_table_desc *table_desc, | 
 | 		   struct acpi_namespace_node *node) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_load_table); | 
 |  | 
 | 	/* Check if table contains valid AML (must be DSDT, PSDT, SSDT, etc.) */ | 
 |  | 
 | 	if (! | 
 | 	    (acpi_gbl_table_data[table_desc->type]. | 
 | 	     flags & ACPI_TABLE_EXECUTABLE)) { | 
 |  | 
 | 		/* Just ignore this table */ | 
 |  | 
 | 		return_ACPI_STATUS(AE_OK); | 
 | 	} | 
 |  | 
 | 	/* Check validity of the AML start and length */ | 
 |  | 
 | 	if (!table_desc->aml_start) { | 
 | 		ACPI_ERROR((AE_INFO, "Null AML pointer")); | 
 | 		return_ACPI_STATUS(AE_BAD_PARAMETER); | 
 | 	} | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AML block at %p\n", | 
 | 			  table_desc->aml_start)); | 
 |  | 
 | 	/* Ignore table if there is no AML contained within */ | 
 |  | 
 | 	if (!table_desc->aml_length) { | 
 | 		ACPI_WARNING((AE_INFO, "Zero-length AML block in table [%4.4s]", | 
 | 			      table_desc->pointer->signature)); | 
 | 		return_ACPI_STATUS(AE_OK); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Parse the table and load the namespace with all named | 
 | 	 * objects found within.  Control methods are NOT parsed | 
 | 	 * at this time.  In fact, the control methods cannot be | 
 | 	 * parsed until the entire namespace is loaded, because | 
 | 	 * if a control method makes a forward reference (call) | 
 | 	 * to another control method, we can't continue parsing | 
 | 	 * because we don't know how many arguments to parse next! | 
 | 	 */ | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 			  "**** Loading table into namespace ****\n")); | 
 |  | 
 | 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		return_ACPI_STATUS(status); | 
 | 	} | 
 |  | 
 | 	status = acpi_ns_parse_table(table_desc, node->child); | 
 | 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); | 
 |  | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		return_ACPI_STATUS(status); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Now we can parse the control methods.  We always parse | 
 | 	 * them here for a sanity check, and if configured for | 
 | 	 * just-in-time parsing, we delete the control method | 
 | 	 * parse trees. | 
 | 	 */ | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 			  "**** Begin Table Method Parsing and Object Initialization ****\n")); | 
 |  | 
 | 	status = acpi_ds_initialize_objects(table_desc, node); | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 			  "**** Completed Table Method Parsing and Object Initialization ****\n")); | 
 |  | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_load_table_by_type | 
 |  * | 
 |  * PARAMETERS:  table_type          - Id of the table type to load | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Load an ACPI table or tables into the namespace.  All tables | 
 |  *              of the given type are loaded.  The mechanism allows this | 
 |  *              routine to be called repeatedly. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | static acpi_status acpi_ns_load_table_by_type(acpi_table_type table_type) | 
 | { | 
 | 	u32 i; | 
 | 	acpi_status status; | 
 | 	struct acpi_table_desc *table_desc; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_load_table_by_type); | 
 |  | 
 | 	status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		return_ACPI_STATUS(status); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Table types supported are: | 
 | 	 * DSDT (one), SSDT/PSDT (multiple) | 
 | 	 */ | 
 | 	switch (table_type) { | 
 | 	case ACPI_TABLE_ID_DSDT: | 
 |  | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace load: DSDT\n")); | 
 |  | 
 | 		table_desc = acpi_gbl_table_lists[ACPI_TABLE_ID_DSDT].next; | 
 |  | 
 | 		/* If table already loaded into namespace, just return */ | 
 |  | 
 | 		if (table_desc->loaded_into_namespace) { | 
 | 			goto unlock_and_exit; | 
 | 		} | 
 |  | 
 | 		/* Now load the single DSDT */ | 
 |  | 
 | 		status = acpi_ns_load_table(table_desc, acpi_gbl_root_node); | 
 | 		if (ACPI_SUCCESS(status)) { | 
 | 			table_desc->loaded_into_namespace = TRUE; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case ACPI_TABLE_ID_SSDT: | 
 | 	case ACPI_TABLE_ID_PSDT: | 
 |  | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 				  "Namespace load: %d SSDT or PSDTs\n", | 
 | 				  acpi_gbl_table_lists[table_type].count)); | 
 |  | 
 | 		/* | 
 | 		 * Traverse list of SSDT or PSDT tables | 
 | 		 */ | 
 | 		table_desc = acpi_gbl_table_lists[table_type].next; | 
 | 		for (i = 0; i < acpi_gbl_table_lists[table_type].count; i++) { | 
 | 			/* | 
 | 			 * Only attempt to load table into namespace if it is not | 
 | 			 * already loaded! | 
 | 			 */ | 
 | 			if (!table_desc->loaded_into_namespace) { | 
 | 				status = | 
 | 				    acpi_ns_load_table(table_desc, | 
 | 						       acpi_gbl_root_node); | 
 | 				if (ACPI_FAILURE(status)) { | 
 | 					break; | 
 | 				} | 
 |  | 
 | 				table_desc->loaded_into_namespace = TRUE; | 
 | 			} | 
 |  | 
 | 			table_desc = table_desc->next; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		status = AE_SUPPORT; | 
 | 		break; | 
 | 	} | 
 |  | 
 |       unlock_and_exit: | 
 | 	(void)acpi_ut_release_mutex(ACPI_MTX_TABLES); | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_load_namespace | 
 |  * | 
 |  * PARAMETERS:  None | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Load the name space from what ever is pointed to by DSDT. | 
 |  *              (DSDT points to either the BIOS or a buffer.) | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status acpi_ns_load_namespace(void) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(acpi_load_name_space); | 
 |  | 
 | 	/* There must be at least a DSDT installed */ | 
 |  | 
 | 	if (acpi_gbl_DSDT == NULL) { | 
 | 		ACPI_ERROR((AE_INFO, "DSDT is not in memory")); | 
 | 		return_ACPI_STATUS(AE_NO_ACPI_TABLES); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Load the namespace.  The DSDT is required, | 
 | 	 * but the SSDT and PSDT tables are optional. | 
 | 	 */ | 
 | 	status = acpi_ns_load_table_by_type(ACPI_TABLE_ID_DSDT); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		return_ACPI_STATUS(status); | 
 | 	} | 
 |  | 
 | 	/* Ignore exceptions from these */ | 
 |  | 
 | 	(void)acpi_ns_load_table_by_type(ACPI_TABLE_ID_SSDT); | 
 | 	(void)acpi_ns_load_table_by_type(ACPI_TABLE_ID_PSDT); | 
 |  | 
 | 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, | 
 | 			      "ACPI Namespace successfully loaded at root %p\n", | 
 | 			      acpi_gbl_root_node)); | 
 |  | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | #ifdef ACPI_FUTURE_IMPLEMENTATION | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_delete_subtree | 
 |  * | 
 |  * PARAMETERS:  start_handle        - Handle in namespace where search begins | 
 |  * | 
 |  * RETURNS      Status | 
 |  * | 
 |  * DESCRIPTION: Walks the namespace starting at the given handle and deletes | 
 |  *              all objects, entries, and scopes in the entire subtree. | 
 |  * | 
 |  *              Namespace/Interpreter should be locked or the subsystem should | 
 |  *              be in shutdown before this routine is called. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle) | 
 | { | 
 | 	acpi_status status; | 
 | 	acpi_handle child_handle; | 
 | 	acpi_handle parent_handle; | 
 | 	acpi_handle next_child_handle; | 
 | 	acpi_handle dummy; | 
 | 	u32 level; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_delete_subtree); | 
 |  | 
 | 	parent_handle = start_handle; | 
 | 	child_handle = NULL; | 
 | 	level = 1; | 
 |  | 
 | 	/* | 
 | 	 * Traverse the tree of objects until we bubble back up | 
 | 	 * to where we started. | 
 | 	 */ | 
 | 	while (level > 0) { | 
 |  | 
 | 		/* Attempt to get the next object in this scope */ | 
 |  | 
 | 		status = acpi_get_next_object(ACPI_TYPE_ANY, parent_handle, | 
 | 					      child_handle, &next_child_handle); | 
 |  | 
 | 		child_handle = next_child_handle; | 
 |  | 
 | 		/* Did we get a new object? */ | 
 |  | 
 | 		if (ACPI_SUCCESS(status)) { | 
 |  | 
 | 			/* Check if this object has any children */ | 
 |  | 
 | 			if (ACPI_SUCCESS | 
 | 			    (acpi_get_next_object | 
 | 			     (ACPI_TYPE_ANY, child_handle, NULL, &dummy))) { | 
 | 				/* | 
 | 				 * There is at least one child of this object, | 
 | 				 * visit the object | 
 | 				 */ | 
 | 				level++; | 
 | 				parent_handle = child_handle; | 
 | 				child_handle = NULL; | 
 | 			} | 
 | 		} else { | 
 | 			/* | 
 | 			 * No more children in this object, go back up to | 
 | 			 * the object's parent | 
 | 			 */ | 
 | 			level--; | 
 |  | 
 | 			/* Delete all children now */ | 
 |  | 
 | 			acpi_ns_delete_children(child_handle); | 
 |  | 
 | 			child_handle = parent_handle; | 
 | 			status = acpi_get_parent(parent_handle, &parent_handle); | 
 | 			if (ACPI_FAILURE(status)) { | 
 | 				return_ACPI_STATUS(status); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Now delete the starting object, and we are done */ | 
 |  | 
 | 	acpi_ns_delete_node(child_handle); | 
 |  | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  *  FUNCTION:       acpi_ns_unload_name_space | 
 |  * | 
 |  *  PARAMETERS:     Handle          - Root of namespace subtree to be deleted | 
 |  * | 
 |  *  RETURN:         Status | 
 |  * | 
 |  *  DESCRIPTION:    Shrinks the namespace, typically in response to an undocking | 
 |  *                  event.  Deletes an entire subtree starting from (and | 
 |  *                  including) the given handle. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status acpi_ns_unload_namespace(acpi_handle handle) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_unload_name_space); | 
 |  | 
 | 	/* Parameter validation */ | 
 |  | 
 | 	if (!acpi_gbl_root_node) { | 
 | 		return_ACPI_STATUS(AE_NO_NAMESPACE); | 
 | 	} | 
 |  | 
 | 	if (!handle) { | 
 | 		return_ACPI_STATUS(AE_BAD_PARAMETER); | 
 | 	} | 
 |  | 
 | 	/* This function does the real work */ | 
 |  | 
 | 	status = acpi_ns_delete_subtree(handle); | 
 |  | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 | #endif | 
 | #endif |