|  | /* | 
|  | *	Adaptec AAC series RAID controller driver | 
|  | *	(c) Copyright 2001 Red Hat Inc.	<alan@redhat.com> | 
|  | * | 
|  | * based on the old aacraid driver that is.. | 
|  | * Adaptec aacraid device driver for Linux. | 
|  | * | 
|  | * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2, or (at your option) | 
|  | * any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; see the file COPYING.  If not, write to | 
|  | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <asm/semaphore.h> | 
|  | #include <asm/uaccess.h> | 
|  |  | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include <scsi/scsi_device.h> | 
|  | #include <scsi/scsi_host.h> | 
|  |  | 
|  | #include "aacraid.h" | 
|  |  | 
|  | /* values for inqd_pdt: Peripheral device type in plain English */ | 
|  | #define	INQD_PDT_DA	0x00	/* Direct-access (DISK) device */ | 
|  | #define	INQD_PDT_PROC	0x03	/* Processor device */ | 
|  | #define	INQD_PDT_CHNGR	0x08	/* Changer (jukebox, scsi2) */ | 
|  | #define	INQD_PDT_COMM	0x09	/* Communication device (scsi2) */ | 
|  | #define	INQD_PDT_NOLUN2 0x1f	/* Unknown Device (scsi2) */ | 
|  | #define	INQD_PDT_NOLUN	0x7f	/* Logical Unit Not Present */ | 
|  |  | 
|  | #define	INQD_PDT_DMASK	0x1F	/* Peripheral Device Type Mask */ | 
|  | #define	INQD_PDT_QMASK	0xE0	/* Peripheral Device Qualifer Mask */ | 
|  |  | 
|  | /* | 
|  | *	Sense codes | 
|  | */ | 
|  |  | 
|  | #define SENCODE_NO_SENSE                        0x00 | 
|  | #define SENCODE_END_OF_DATA                     0x00 | 
|  | #define SENCODE_BECOMING_READY                  0x04 | 
|  | #define SENCODE_INIT_CMD_REQUIRED               0x04 | 
|  | #define SENCODE_PARAM_LIST_LENGTH_ERROR         0x1A | 
|  | #define SENCODE_INVALID_COMMAND                 0x20 | 
|  | #define SENCODE_LBA_OUT_OF_RANGE                0x21 | 
|  | #define SENCODE_INVALID_CDB_FIELD               0x24 | 
|  | #define SENCODE_LUN_NOT_SUPPORTED               0x25 | 
|  | #define SENCODE_INVALID_PARAM_FIELD             0x26 | 
|  | #define SENCODE_PARAM_NOT_SUPPORTED             0x26 | 
|  | #define SENCODE_PARAM_VALUE_INVALID             0x26 | 
|  | #define SENCODE_RESET_OCCURRED                  0x29 | 
|  | #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET     0x3E | 
|  | #define SENCODE_INQUIRY_DATA_CHANGED            0x3F | 
|  | #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED     0x39 | 
|  | #define SENCODE_DIAGNOSTIC_FAILURE              0x40 | 
|  | #define SENCODE_INTERNAL_TARGET_FAILURE         0x44 | 
|  | #define SENCODE_INVALID_MESSAGE_ERROR           0x49 | 
|  | #define SENCODE_LUN_FAILED_SELF_CONFIG          0x4c | 
|  | #define SENCODE_OVERLAPPED_COMMAND              0x4E | 
|  |  | 
|  | /* | 
|  | *	Additional sense codes | 
|  | */ | 
|  |  | 
|  | #define ASENCODE_NO_SENSE                       0x00 | 
|  | #define ASENCODE_END_OF_DATA                    0x05 | 
|  | #define ASENCODE_BECOMING_READY                 0x01 | 
|  | #define ASENCODE_INIT_CMD_REQUIRED              0x02 | 
|  | #define ASENCODE_PARAM_LIST_LENGTH_ERROR        0x00 | 
|  | #define ASENCODE_INVALID_COMMAND                0x00 | 
|  | #define ASENCODE_LBA_OUT_OF_RANGE               0x00 | 
|  | #define ASENCODE_INVALID_CDB_FIELD              0x00 | 
|  | #define ASENCODE_LUN_NOT_SUPPORTED              0x00 | 
|  | #define ASENCODE_INVALID_PARAM_FIELD            0x00 | 
|  | #define ASENCODE_PARAM_NOT_SUPPORTED            0x01 | 
|  | #define ASENCODE_PARAM_VALUE_INVALID            0x02 | 
|  | #define ASENCODE_RESET_OCCURRED                 0x00 | 
|  | #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET    0x00 | 
|  | #define ASENCODE_INQUIRY_DATA_CHANGED           0x03 | 
|  | #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED    0x00 | 
|  | #define ASENCODE_DIAGNOSTIC_FAILURE             0x80 | 
|  | #define ASENCODE_INTERNAL_TARGET_FAILURE        0x00 | 
|  | #define ASENCODE_INVALID_MESSAGE_ERROR          0x00 | 
|  | #define ASENCODE_LUN_FAILED_SELF_CONFIG         0x00 | 
|  | #define ASENCODE_OVERLAPPED_COMMAND             0x00 | 
|  |  | 
|  | #define BYTE0(x) (unsigned char)(x) | 
|  | #define BYTE1(x) (unsigned char)((x) >> 8) | 
|  | #define BYTE2(x) (unsigned char)((x) >> 16) | 
|  | #define BYTE3(x) (unsigned char)((x) >> 24) | 
|  |  | 
|  | /*------------------------------------------------------------------------------ | 
|  | *              S T R U C T S / T Y P E D E F S | 
|  | *----------------------------------------------------------------------------*/ | 
|  | /* SCSI inquiry data */ | 
|  | struct inquiry_data { | 
|  | u8 inqd_pdt;	/* Peripheral qualifier | Peripheral Device Type  */ | 
|  | u8 inqd_dtq;	/* RMB | Device Type Qualifier  */ | 
|  | u8 inqd_ver;	/* ISO version | ECMA version | ANSI-approved version */ | 
|  | u8 inqd_rdf;	/* AENC | TrmIOP | Response data format */ | 
|  | u8 inqd_len;	/* Additional length (n-4) */ | 
|  | u8 inqd_pad1[2];/* Reserved - must be zero */ | 
|  | u8 inqd_pad2;	/* RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */ | 
|  | u8 inqd_vid[8];	/* Vendor ID */ | 
|  | u8 inqd_pid[16];/* Product ID */ | 
|  | u8 inqd_prl[4];	/* Product Revision Level */ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *              M O D U L E   G L O B A L S | 
|  | */ | 
|  |  | 
|  | static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap); | 
|  | static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg); | 
|  | static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg); | 
|  | static int aac_send_srb_fib(struct scsi_cmnd* scsicmd); | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  | static char *aac_get_status_string(u32 status); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | *	Non dasd selection is handled entirely in aachba now | 
|  | */ | 
|  |  | 
|  | static int nondasd = -1; | 
|  | static int dacmode = -1; | 
|  |  | 
|  | static int commit = -1; | 
|  | int startup_timeout = 180; | 
|  | int aif_timeout = 120; | 
|  |  | 
|  | module_param(nondasd, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on"); | 
|  | module_param(dacmode, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on"); | 
|  | module_param(commit, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on"); | 
|  | module_param(startup_timeout, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for adapter to have it's kernel up and\nrunning. This is typically adjusted for large systems that do not have a BIOS."); | 
|  | module_param(aif_timeout, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for applications to pick up AIFs before\nderegistering them. This is typically adjusted for heavily burdened systems."); | 
|  |  | 
|  | int numacb = -1; | 
|  | module_param(numacb, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware."); | 
|  |  | 
|  | int acbsize = -1; | 
|  | module_param(acbsize, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware."); | 
|  | /** | 
|  | *	aac_get_config_status	-	check the adapter configuration | 
|  | *	@common: adapter to query | 
|  | * | 
|  | *	Query config status, and commit the configuration if needed. | 
|  | */ | 
|  | int aac_get_config_status(struct aac_dev *dev) | 
|  | { | 
|  | int status = 0; | 
|  | struct fib * fibptr; | 
|  |  | 
|  | if (!(fibptr = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  | { | 
|  | struct aac_get_config_status *dinfo; | 
|  | dinfo = (struct aac_get_config_status *) fib_data(fibptr); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS); | 
|  | dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data)); | 
|  | } | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (struct aac_get_config_status), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  | if (status < 0 ) { | 
|  | printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n"); | 
|  | } else { | 
|  | struct aac_get_config_status_resp *reply | 
|  | = (struct aac_get_config_status_resp *) fib_data(fibptr); | 
|  | dprintk((KERN_WARNING | 
|  | "aac_get_config_status: response=%d status=%d action=%d\n", | 
|  | le32_to_cpu(reply->response), | 
|  | le32_to_cpu(reply->status), | 
|  | le32_to_cpu(reply->data.action))); | 
|  | if ((le32_to_cpu(reply->response) != ST_OK) || | 
|  | (le32_to_cpu(reply->status) != CT_OK) || | 
|  | (le32_to_cpu(reply->data.action) > CFACT_PAUSE)) { | 
|  | printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n"); | 
|  | status = -EINVAL; | 
|  | } | 
|  | } | 
|  | aac_fib_complete(fibptr); | 
|  | /* Send a CT_COMMIT_CONFIG to enable discovery of devices */ | 
|  | if (status >= 0) { | 
|  | if (commit == 1) { | 
|  | struct aac_commit_config * dinfo; | 
|  | aac_fib_init(fibptr); | 
|  | dinfo = (struct aac_commit_config *) fib_data(fibptr); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (struct aac_commit_config), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  | aac_fib_complete(fibptr); | 
|  | } else if (commit == 0) { | 
|  | printk(KERN_WARNING | 
|  | "aac_get_config_status: Foreign device configurations are being ignored\n"); | 
|  | } | 
|  | } | 
|  | aac_fib_free(fibptr); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_get_containers	-	list containers | 
|  | *	@common: adapter to probe | 
|  | * | 
|  | *	Make a list of all containers on this controller | 
|  | */ | 
|  | int aac_get_containers(struct aac_dev *dev) | 
|  | { | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  | u32 index; | 
|  | int status = 0; | 
|  | struct fib * fibptr; | 
|  | unsigned instance; | 
|  | struct aac_get_container_count *dinfo; | 
|  | struct aac_get_container_count_resp *dresp; | 
|  | int maximum_num_containers = MAXIMUM_NUM_CONTAINERS; | 
|  |  | 
|  | instance = dev->scsi_host_ptr->unique_id; | 
|  |  | 
|  | if (!(fibptr = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  | dinfo = (struct aac_get_container_count *) fib_data(fibptr); | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (struct aac_get_container_count), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  | if (status >= 0) { | 
|  | dresp = (struct aac_get_container_count_resp *)fib_data(fibptr); | 
|  | maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries); | 
|  | aac_fib_complete(fibptr); | 
|  | } | 
|  |  | 
|  | if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS) | 
|  | maximum_num_containers = MAXIMUM_NUM_CONTAINERS; | 
|  | fsa_dev_ptr = (struct fsa_dev_info *) kmalloc( | 
|  | sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL); | 
|  | if (!fsa_dev_ptr) { | 
|  | aac_fib_free(fibptr); | 
|  | return -ENOMEM; | 
|  | } | 
|  | memset(fsa_dev_ptr, 0, sizeof(*fsa_dev_ptr) * maximum_num_containers); | 
|  |  | 
|  | dev->fsa_dev = fsa_dev_ptr; | 
|  | dev->maximum_num_containers = maximum_num_containers; | 
|  |  | 
|  | for (index = 0; index < dev->maximum_num_containers; index++) { | 
|  | struct aac_query_mount *dinfo; | 
|  | struct aac_mount *dresp; | 
|  |  | 
|  | fsa_dev_ptr[index].devname[0] = '\0'; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  | dinfo = (struct aac_query_mount *) fib_data(fibptr); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_NameServe); | 
|  | dinfo->count = cpu_to_le32(index); | 
|  | dinfo->type = cpu_to_le32(FT_FILESYS); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (struct aac_query_mount), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  | if (status < 0 ) { | 
|  | printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n"); | 
|  | break; | 
|  | } | 
|  | dresp = (struct aac_mount *)fib_data(fibptr); | 
|  |  | 
|  | if ((le32_to_cpu(dresp->status) == ST_OK) && | 
|  | (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) { | 
|  | dinfo->command = cpu_to_le32(VM_NameServe64); | 
|  | dinfo->count = cpu_to_le32(index); | 
|  | dinfo->type = cpu_to_le32(FT_FILESYS); | 
|  |  | 
|  | if (aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof(struct aac_query_mount), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL) < 0) | 
|  | continue; | 
|  | } else | 
|  | dresp->mnt[0].capacityhigh = 0; | 
|  |  | 
|  | dprintk ((KERN_DEBUG | 
|  | "VM_NameServe cid=%d status=%d vol=%d state=%d cap=%llu\n", | 
|  | (int)index, (int)le32_to_cpu(dresp->status), | 
|  | (int)le32_to_cpu(dresp->mnt[0].vol), | 
|  | (int)le32_to_cpu(dresp->mnt[0].state), | 
|  | ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + | 
|  | (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32))); | 
|  | if ((le32_to_cpu(dresp->status) == ST_OK) && | 
|  | (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) && | 
|  | (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) { | 
|  | fsa_dev_ptr[index].valid = 1; | 
|  | fsa_dev_ptr[index].type = le32_to_cpu(dresp->mnt[0].vol); | 
|  | fsa_dev_ptr[index].size | 
|  | = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + | 
|  | (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32); | 
|  | if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) | 
|  | fsa_dev_ptr[index].ro = 1; | 
|  | } | 
|  | aac_fib_complete(fibptr); | 
|  | /* | 
|  | *	If there are no more containers, then stop asking. | 
|  | */ | 
|  | if ((index + 1) >= le32_to_cpu(dresp->count)){ | 
|  | break; | 
|  | } | 
|  | } | 
|  | aac_fib_free(fibptr); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigned int offset, unsigned int len) | 
|  | { | 
|  | void *buf; | 
|  | unsigned int transfer_len; | 
|  | struct scatterlist *sg = scsicmd->request_buffer; | 
|  |  | 
|  | if (scsicmd->use_sg) { | 
|  | buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset; | 
|  | transfer_len = min(sg->length, len + offset); | 
|  | } else { | 
|  | buf = scsicmd->request_buffer; | 
|  | transfer_len = min(scsicmd->request_bufflen, len + offset); | 
|  | } | 
|  |  | 
|  | memcpy(buf + offset, data, transfer_len - offset); | 
|  |  | 
|  | if (scsicmd->use_sg) | 
|  | kunmap_atomic(buf - sg->offset, KM_IRQ0); | 
|  |  | 
|  | } | 
|  |  | 
|  | static void get_container_name_callback(void *context, struct fib * fibptr) | 
|  | { | 
|  | struct aac_get_name_resp * get_name_reply; | 
|  | struct scsi_cmnd * scsicmd; | 
|  |  | 
|  | scsicmd = (struct scsi_cmnd *) context; | 
|  | scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL; | 
|  |  | 
|  | dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies)); | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  | get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr); | 
|  | /* Failure is irrelevant, using default value instead */ | 
|  | if ((le32_to_cpu(get_name_reply->status) == CT_OK) | 
|  | && (get_name_reply->data[0] != '\0')) { | 
|  | char *sp = get_name_reply->data; | 
|  | sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0'; | 
|  | while (*sp == ' ') | 
|  | ++sp; | 
|  | if (*sp) { | 
|  | char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)]; | 
|  | int count = sizeof(d); | 
|  | char *dp = d; | 
|  | do { | 
|  | *dp++ = (*sp) ? *sp++ : ' '; | 
|  | } while (--count > 0); | 
|  | aac_internal_transfer(scsicmd, d, | 
|  | offsetof(struct inquiry_data, inqd_pid), sizeof(d)); | 
|  | } | 
|  | } | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_get_container_name	-	get container name, none blocking. | 
|  | */ | 
|  | static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid) | 
|  | { | 
|  | int status; | 
|  | struct aac_get_name *dinfo; | 
|  | struct fib * cmd_fibcontext; | 
|  | struct aac_dev * dev; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  |  | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(cmd_fibcontext); | 
|  | dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_READ_NAME); | 
|  | dinfo->cid = cpu_to_le32(cid); | 
|  | dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data)); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | cmd_fibcontext, | 
|  | sizeof (struct aac_get_name), | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) get_container_name_callback, | 
|  | (void *) scsicmd); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_probe_container		-	query a logical volume | 
|  | *	@dev: device to query | 
|  | *	@cid: container identifier | 
|  | * | 
|  | *	Queries the controller about the given volume. The volume information | 
|  | *	is updated in the struct fsa_dev_info structure rather than returned. | 
|  | */ | 
|  |  | 
|  | int aac_probe_container(struct aac_dev *dev, int cid) | 
|  | { | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  | int status; | 
|  | struct aac_query_mount *dinfo; | 
|  | struct aac_mount *dresp; | 
|  | struct fib * fibptr; | 
|  | unsigned instance; | 
|  |  | 
|  | fsa_dev_ptr = dev->fsa_dev; | 
|  | instance = dev->scsi_host_ptr->unique_id; | 
|  |  | 
|  | if (!(fibptr = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  |  | 
|  | dinfo = (struct aac_query_mount *)fib_data(fibptr); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_NameServe); | 
|  | dinfo->count = cpu_to_le32(cid); | 
|  | dinfo->type = cpu_to_le32(FT_FILESYS); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof(struct aac_query_mount), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  | if (status < 0) { | 
|  | printk(KERN_WARNING "aacraid: aac_probe_container query failed.\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | dresp = (struct aac_mount *) fib_data(fibptr); | 
|  |  | 
|  | if ((le32_to_cpu(dresp->status) == ST_OK) && | 
|  | (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) { | 
|  | dinfo->command = cpu_to_le32(VM_NameServe64); | 
|  | dinfo->count = cpu_to_le32(cid); | 
|  | dinfo->type = cpu_to_le32(FT_FILESYS); | 
|  |  | 
|  | if (aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof(struct aac_query_mount), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL) < 0) | 
|  | goto error; | 
|  | } else | 
|  | dresp->mnt[0].capacityhigh = 0; | 
|  |  | 
|  | if ((le32_to_cpu(dresp->status) == ST_OK) && | 
|  | (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) && | 
|  | (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) { | 
|  | fsa_dev_ptr[cid].valid = 1; | 
|  | fsa_dev_ptr[cid].type = le32_to_cpu(dresp->mnt[0].vol); | 
|  | fsa_dev_ptr[cid].size | 
|  | = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + | 
|  | (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32); | 
|  | if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) | 
|  | fsa_dev_ptr[cid].ro = 1; | 
|  | } | 
|  |  | 
|  | error: | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* Local Structure to set SCSI inquiry data strings */ | 
|  | struct scsi_inq { | 
|  | char vid[8];         /* Vendor ID */ | 
|  | char pid[16];        /* Product ID */ | 
|  | char prl[4];         /* Product Revision Level */ | 
|  | }; | 
|  |  | 
|  | /** | 
|  | *	InqStrCopy	-	string merge | 
|  | *	@a:	string to copy from | 
|  | *	@b:	string to copy to | 
|  | * | 
|  | * 	Copy a String from one location to another | 
|  | *	without copying \0 | 
|  | */ | 
|  |  | 
|  | static void inqstrcpy(char *a, char *b) | 
|  | { | 
|  |  | 
|  | while(*a != (char)0) | 
|  | *b++ = *a++; | 
|  | } | 
|  |  | 
|  | static char *container_types[] = { | 
|  | "None", | 
|  | "Volume", | 
|  | "Mirror", | 
|  | "Stripe", | 
|  | "RAID5", | 
|  | "SSRW", | 
|  | "SSRO", | 
|  | "Morph", | 
|  | "Legacy", | 
|  | "RAID4", | 
|  | "RAID10", | 
|  | "RAID00", | 
|  | "V-MIRRORS", | 
|  | "PSEUDO R4", | 
|  | "RAID50", | 
|  | "RAID5D", | 
|  | "RAID5D0", | 
|  | "RAID1E", | 
|  | "RAID6", | 
|  | "RAID60", | 
|  | "Unknown" | 
|  | }; | 
|  |  | 
|  |  | 
|  |  | 
|  | /* Function: setinqstr | 
|  | * | 
|  | * Arguments: [1] pointer to void [1] int | 
|  | * | 
|  | * Purpose: Sets SCSI inquiry data strings for vendor, product | 
|  | * and revision level. Allows strings to be set in platform dependant | 
|  | * files instead of in OS dependant driver source. | 
|  | */ | 
|  |  | 
|  | static void setinqstr(struct aac_dev *dev, void *data, int tindex) | 
|  | { | 
|  | struct scsi_inq *str; | 
|  |  | 
|  | str = (struct scsi_inq *)(data); /* cast data to scsi inq block */ | 
|  | memset(str, ' ', sizeof(*str)); | 
|  |  | 
|  | if (dev->supplement_adapter_info.AdapterTypeText[0]) { | 
|  | char * cp = dev->supplement_adapter_info.AdapterTypeText; | 
|  | int c = sizeof(str->vid); | 
|  | while (*cp && *cp != ' ' && --c) | 
|  | ++cp; | 
|  | c = *cp; | 
|  | *cp = '\0'; | 
|  | inqstrcpy (dev->supplement_adapter_info.AdapterTypeText, | 
|  | str->vid); | 
|  | *cp = c; | 
|  | while (*cp && *cp != ' ') | 
|  | ++cp; | 
|  | while (*cp == ' ') | 
|  | ++cp; | 
|  | /* last six chars reserved for vol type */ | 
|  | c = 0; | 
|  | if (strlen(cp) > sizeof(str->pid)) { | 
|  | c = cp[sizeof(str->pid)]; | 
|  | cp[sizeof(str->pid)] = '\0'; | 
|  | } | 
|  | inqstrcpy (cp, str->pid); | 
|  | if (c) | 
|  | cp[sizeof(str->pid)] = c; | 
|  | } else { | 
|  | struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype); | 
|  |  | 
|  | inqstrcpy (mp->vname, str->vid); | 
|  | /* last six chars reserved for vol type */ | 
|  | inqstrcpy (mp->model, str->pid); | 
|  | } | 
|  |  | 
|  | if (tindex < ARRAY_SIZE(container_types)){ | 
|  | char *findit = str->pid; | 
|  |  | 
|  | for ( ; *findit != ' '; findit++); /* walk till we find a space */ | 
|  | /* RAID is superfluous in the context of a RAID device */ | 
|  | if (memcmp(findit-4, "RAID", 4) == 0) | 
|  | *(findit -= 4) = ' '; | 
|  | if (((findit - str->pid) + strlen(container_types[tindex])) | 
|  | < (sizeof(str->pid) + sizeof(str->prl))) | 
|  | inqstrcpy (container_types[tindex], findit + 1); | 
|  | } | 
|  | inqstrcpy ("V1.0", str->prl); | 
|  | } | 
|  |  | 
|  | static void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code, | 
|  | u8 a_sense_code, u8 incorrect_length, | 
|  | u8 bit_pointer, u16 field_pointer, | 
|  | u32 residue) | 
|  | { | 
|  | sense_buf[0] = 0xF0;	/* Sense data valid, err code 70h (current error) */ | 
|  | sense_buf[1] = 0;	/* Segment number, always zero */ | 
|  |  | 
|  | if (incorrect_length) { | 
|  | sense_buf[2] = sense_key | 0x20;/* Set ILI bit | sense key */ | 
|  | sense_buf[3] = BYTE3(residue); | 
|  | sense_buf[4] = BYTE2(residue); | 
|  | sense_buf[5] = BYTE1(residue); | 
|  | sense_buf[6] = BYTE0(residue); | 
|  | } else | 
|  | sense_buf[2] = sense_key;	/* Sense key */ | 
|  |  | 
|  | if (sense_key == ILLEGAL_REQUEST) | 
|  | sense_buf[7] = 10;	/* Additional sense length */ | 
|  | else | 
|  | sense_buf[7] = 6;	/* Additional sense length */ | 
|  |  | 
|  | sense_buf[12] = sense_code;	/* Additional sense code */ | 
|  | sense_buf[13] = a_sense_code;	/* Additional sense code qualifier */ | 
|  | if (sense_key == ILLEGAL_REQUEST) { | 
|  | sense_buf[15] = 0; | 
|  |  | 
|  | if (sense_code == SENCODE_INVALID_PARAM_FIELD) | 
|  | sense_buf[15] = 0x80;/* Std sense key specific field */ | 
|  | /* Illegal parameter is in the parameter block */ | 
|  |  | 
|  | if (sense_code == SENCODE_INVALID_CDB_FIELD) | 
|  | sense_buf[15] = 0xc0;/* Std sense key specific field */ | 
|  | /* Illegal parameter is in the CDB block */ | 
|  | sense_buf[15] |= bit_pointer; | 
|  | sense_buf[16] = field_pointer >> 8;	/* MSB */ | 
|  | sense_buf[17] = field_pointer;		/* LSB */ | 
|  | } | 
|  | } | 
|  |  | 
|  | int aac_get_adapter_info(struct aac_dev* dev) | 
|  | { | 
|  | struct fib* fibptr; | 
|  | int rcode; | 
|  | u32 tmp; | 
|  | struct aac_adapter_info *info; | 
|  | struct aac_bus_info *command; | 
|  | struct aac_bus_info_response *bus_info; | 
|  |  | 
|  | if (!(fibptr = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  | info = (struct aac_adapter_info *) fib_data(fibptr); | 
|  | memset(info,0,sizeof(*info)); | 
|  |  | 
|  | rcode = aac_fib_send(RequestAdapterInfo, | 
|  | fibptr, | 
|  | sizeof(*info), | 
|  | FsaNormal, | 
|  | -1, 1, /* First `interrupt' command uses special wait */ | 
|  | NULL, | 
|  | NULL); | 
|  |  | 
|  | if (rcode < 0) { | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | return rcode; | 
|  | } | 
|  | memcpy(&dev->adapter_info, info, sizeof(*info)); | 
|  |  | 
|  | if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) { | 
|  | struct aac_supplement_adapter_info * info; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  |  | 
|  | info = (struct aac_supplement_adapter_info *) fib_data(fibptr); | 
|  |  | 
|  | memset(info,0,sizeof(*info)); | 
|  |  | 
|  | rcode = aac_fib_send(RequestSupplementAdapterInfo, | 
|  | fibptr, | 
|  | sizeof(*info), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, | 
|  | NULL); | 
|  |  | 
|  | if (rcode >= 0) | 
|  | memcpy(&dev->supplement_adapter_info, info, sizeof(*info)); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * GetBusInfo | 
|  | */ | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  |  | 
|  | bus_info = (struct aac_bus_info_response *) fib_data(fibptr); | 
|  |  | 
|  | memset(bus_info, 0, sizeof(*bus_info)); | 
|  |  | 
|  | command = (struct aac_bus_info *)bus_info; | 
|  |  | 
|  | command->Command = cpu_to_le32(VM_Ioctl); | 
|  | command->ObjType = cpu_to_le32(FT_DRIVE); | 
|  | command->MethodId = cpu_to_le32(1); | 
|  | command->CtlCmd = cpu_to_le32(GetBusInfo); | 
|  |  | 
|  | rcode = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (*bus_info), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  |  | 
|  | if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) { | 
|  | dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus); | 
|  | dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount); | 
|  | } | 
|  |  | 
|  | tmp = le32_to_cpu(dev->adapter_info.kernelrev); | 
|  | printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", | 
|  | dev->name, | 
|  | dev->id, | 
|  | tmp>>24, | 
|  | (tmp>>16)&0xff, | 
|  | tmp&0xff, | 
|  | le32_to_cpu(dev->adapter_info.kernelbuild), | 
|  | (int)sizeof(dev->supplement_adapter_info.BuildDate), | 
|  | dev->supplement_adapter_info.BuildDate); | 
|  | tmp = le32_to_cpu(dev->adapter_info.monitorrev); | 
|  | printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n", | 
|  | dev->name, dev->id, | 
|  | tmp>>24,(tmp>>16)&0xff,tmp&0xff, | 
|  | le32_to_cpu(dev->adapter_info.monitorbuild)); | 
|  | tmp = le32_to_cpu(dev->adapter_info.biosrev); | 
|  | printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n", | 
|  | dev->name, dev->id, | 
|  | tmp>>24,(tmp>>16)&0xff,tmp&0xff, | 
|  | le32_to_cpu(dev->adapter_info.biosbuild)); | 
|  | if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0) | 
|  | printk(KERN_INFO "%s%d: serial %x\n", | 
|  | dev->name, dev->id, | 
|  | le32_to_cpu(dev->adapter_info.serial[0])); | 
|  |  | 
|  | dev->nondasd_support = 0; | 
|  | dev->raid_scsi_mode = 0; | 
|  | if(dev->adapter_info.options & AAC_OPT_NONDASD){ | 
|  | dev->nondasd_support = 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the firmware supports ROMB RAID/SCSI mode and we are currently | 
|  | * in RAID/SCSI mode, set the flag. For now if in this mode we will | 
|  | * force nondasd support on. If we decide to allow the non-dasd flag | 
|  | * additional changes changes will have to be made to support | 
|  | * RAID/SCSI.  the function aac_scsi_cmd in this module will have to be | 
|  | * changed to support the new dev->raid_scsi_mode flag instead of | 
|  | * leaching off of the dev->nondasd_support flag. Also in linit.c the | 
|  | * function aac_detect will have to be modified where it sets up the | 
|  | * max number of channels based on the aac->nondasd_support flag only. | 
|  | */ | 
|  | if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) && | 
|  | (dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) { | 
|  | dev->nondasd_support = 1; | 
|  | dev->raid_scsi_mode = 1; | 
|  | } | 
|  | if (dev->raid_scsi_mode != 0) | 
|  | printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n", | 
|  | dev->name, dev->id); | 
|  |  | 
|  | if(nondasd != -1) { | 
|  | dev->nondasd_support = (nondasd!=0); | 
|  | } | 
|  | if(dev->nondasd_support != 0){ | 
|  | printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id); | 
|  | } | 
|  |  | 
|  | dev->dac_support = 0; | 
|  | if( (sizeof(dma_addr_t) > 4) && (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)){ | 
|  | printk(KERN_INFO "%s%d: 64bit support enabled.\n", dev->name, dev->id); | 
|  | dev->dac_support = 1; | 
|  | } | 
|  |  | 
|  | if(dacmode != -1) { | 
|  | dev->dac_support = (dacmode!=0); | 
|  | } | 
|  | if(dev->dac_support != 0) { | 
|  | if (!pci_set_dma_mask(dev->pdev, DMA_64BIT_MASK) && | 
|  | !pci_set_consistent_dma_mask(dev->pdev, DMA_64BIT_MASK)) { | 
|  | printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n", | 
|  | dev->name, dev->id); | 
|  | } else if (!pci_set_dma_mask(dev->pdev, DMA_32BIT_MASK) && | 
|  | !pci_set_consistent_dma_mask(dev->pdev, DMA_32BIT_MASK)) { | 
|  | printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n", | 
|  | dev->name, dev->id); | 
|  | dev->dac_support = 0; | 
|  | } else { | 
|  | printk(KERN_WARNING"%s%d: No suitable DMA available.\n", | 
|  | dev->name, dev->id); | 
|  | rcode = -ENOMEM; | 
|  | } | 
|  | } | 
|  | /* | 
|  | * 57 scatter gather elements | 
|  | */ | 
|  | if (!(dev->raw_io_interface)) { | 
|  | dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr) - | 
|  | sizeof(struct aac_write) + sizeof(struct sgentry)) / | 
|  | sizeof(struct sgentry); | 
|  | if (dev->dac_support) { | 
|  | /* | 
|  | * 38 scatter gather elements | 
|  | */ | 
|  | dev->scsi_host_ptr->sg_tablesize = | 
|  | (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr) - | 
|  | sizeof(struct aac_write64) + | 
|  | sizeof(struct sgentry64)) / | 
|  | sizeof(struct sgentry64); | 
|  | } | 
|  | dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT; | 
|  | if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) { | 
|  | /* | 
|  | * Worst case size that could cause sg overflow when | 
|  | * we break up SG elements that are larger than 64KB. | 
|  | * Would be nice if we could tell the SCSI layer what | 
|  | * the maximum SG element size can be. Worst case is | 
|  | * (sg_tablesize-1) 4KB elements with one 64KB | 
|  | * element. | 
|  | *	32bit -> 468 or 238KB	64bit -> 424 or 212KB | 
|  | */ | 
|  | dev->scsi_host_ptr->max_sectors = | 
|  | (dev->scsi_host_ptr->sg_tablesize * 8) + 112; | 
|  | } | 
|  | } | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  |  | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void io_callback(void *context, struct fib * fibptr) | 
|  | { | 
|  | struct aac_dev *dev; | 
|  | struct aac_read_reply *readreply; | 
|  | struct scsi_cmnd *scsicmd; | 
|  | u32 cid; | 
|  |  | 
|  | scsicmd = (struct scsi_cmnd *) context; | 
|  | scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | cid = scmd_id(scsicmd); | 
|  |  | 
|  | if (nblank(dprintk(x))) { | 
|  | u64 lba; | 
|  | switch (scsicmd->cmnd[0]) { | 
|  | case WRITE_6: | 
|  | case READ_6: | 
|  | lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | | 
|  | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | 
|  | break; | 
|  | case WRITE_16: | 
|  | case READ_16: | 
|  | lba = ((u64)scsicmd->cmnd[2] << 56) | | 
|  | ((u64)scsicmd->cmnd[3] << 48) | | 
|  | ((u64)scsicmd->cmnd[4] << 40) | | 
|  | ((u64)scsicmd->cmnd[5] << 32) | | 
|  | ((u64)scsicmd->cmnd[6] << 24) | | 
|  | (scsicmd->cmnd[7] << 16) | | 
|  | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | break; | 
|  | case WRITE_12: | 
|  | case READ_12: | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | | 
|  | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | break; | 
|  | default: | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | | 
|  | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | break; | 
|  | } | 
|  | printk(KERN_DEBUG | 
|  | "io_callback[cpu %d]: lba = %llu, t = %ld.\n", | 
|  | smp_processor_id(), (unsigned long long)lba, jiffies); | 
|  | } | 
|  |  | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  | if(scsicmd->use_sg) | 
|  | pci_unmap_sg(dev->pdev, | 
|  | (struct scatterlist *)scsicmd->request_buffer, | 
|  | scsicmd->use_sg, | 
|  | scsicmd->sc_data_direction); | 
|  | else if(scsicmd->request_bufflen) | 
|  | pci_unmap_single(dev->pdev, scsicmd->SCp.dma_handle, | 
|  | scsicmd->request_bufflen, | 
|  | scsicmd->sc_data_direction); | 
|  | readreply = (struct aac_read_reply *)fib_data(fibptr); | 
|  | if (le32_to_cpu(readreply->status) == ST_OK) | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | else { | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  | printk(KERN_WARNING "io_callback: io failed, status = %d\n", | 
|  | le32_to_cpu(readreply->status)); | 
|  | #endif | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | 
|  | HARDWARE_ERROR, | 
|  | SENCODE_INTERNAL_TARGET_FAILURE, | 
|  | ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, | 
|  | 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | 
|  | ? sizeof(scsicmd->sense_buffer) | 
|  | : sizeof(dev->fsa_dev[cid].sense_data)); | 
|  | } | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  |  | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | } | 
|  |  | 
|  | static int aac_read(struct scsi_cmnd * scsicmd, int cid) | 
|  | { | 
|  | u64 lba; | 
|  | u32 count; | 
|  | int status; | 
|  |  | 
|  | u16 fibsize; | 
|  | struct aac_dev *dev; | 
|  | struct fib * cmd_fibcontext; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | /* | 
|  | *	Get block address and transfer length | 
|  | */ | 
|  | switch (scsicmd->cmnd[0]) { | 
|  | case READ_6: | 
|  | dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", cid)); | 
|  |  | 
|  | lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | | 
|  | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | 
|  | count = scsicmd->cmnd[4]; | 
|  |  | 
|  | if (count == 0) | 
|  | count = 256; | 
|  | break; | 
|  | case READ_16: | 
|  | dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", cid)); | 
|  |  | 
|  | lba = 	((u64)scsicmd->cmnd[2] << 56) | | 
|  | ((u64)scsicmd->cmnd[3] << 48) | | 
|  | ((u64)scsicmd->cmnd[4] << 40) | | 
|  | ((u64)scsicmd->cmnd[5] << 32) | | 
|  | ((u64)scsicmd->cmnd[6] << 24) | | 
|  | (scsicmd->cmnd[7] << 16) | | 
|  | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | count = (scsicmd->cmnd[10] << 24) | | 
|  | (scsicmd->cmnd[11] << 16) | | 
|  | (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; | 
|  | break; | 
|  | case READ_12: | 
|  | dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", cid)); | 
|  |  | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | | 
|  | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | count = (scsicmd->cmnd[6] << 24) | | 
|  | (scsicmd->cmnd[7] << 16) | | 
|  | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | break; | 
|  | default: | 
|  | dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", cid)); | 
|  |  | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | | 
|  | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; | 
|  | break; | 
|  | } | 
|  | dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n", | 
|  | smp_processor_id(), (unsigned long long)lba, jiffies)); | 
|  | if ((!(dev->raw_io_interface) || !(dev->raw_io_64)) && | 
|  | (lba & 0xffffffff00000000LL)) { | 
|  | dprintk((KERN_DEBUG "aac_read: Illegal lba\n")); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | 
|  | HARDWARE_ERROR, | 
|  | SENCODE_INTERNAL_TARGET_FAILURE, | 
|  | ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, | 
|  | 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | 
|  | ? sizeof(scsicmd->sense_buffer) | 
|  | : sizeof(dev->fsa_dev[cid].sense_data)); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | /* | 
|  | *	Alocate and initialize a Fib | 
|  | */ | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | aac_fib_init(cmd_fibcontext); | 
|  |  | 
|  | if (dev->raw_io_interface) { | 
|  | struct aac_raw_io *readcmd; | 
|  | readcmd = (struct aac_raw_io *) fib_data(cmd_fibcontext); | 
|  | readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); | 
|  | readcmd->count = cpu_to_le32(count<<9); | 
|  | readcmd->cid = cpu_to_le16(cid); | 
|  | readcmd->flags = cpu_to_le16(1); | 
|  | readcmd->bpTotal = 0; | 
|  | readcmd->bpComplete = 0; | 
|  |  | 
|  | aac_build_sgraw(scsicmd, &readcmd->sg); | 
|  | fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentryraw)); | 
|  | BUG_ON(fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerRawIo, | 
|  | cmd_fibcontext, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) scsicmd); | 
|  | } else if (dev->dac_support == 1) { | 
|  | struct aac_read64 *readcmd; | 
|  | readcmd = (struct aac_read64 *) fib_data(cmd_fibcontext); | 
|  | readcmd->command = cpu_to_le32(VM_CtHostRead64); | 
|  | readcmd->cid = cpu_to_le16(cid); | 
|  | readcmd->sector_count = cpu_to_le16(count); | 
|  | readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | readcmd->pad   = 0; | 
|  | readcmd->flags = 0; | 
|  |  | 
|  | aac_build_sg64(scsicmd, &readcmd->sg); | 
|  | fibsize = sizeof(struct aac_read64) + | 
|  | ((le32_to_cpu(readcmd->sg.count) - 1) * | 
|  | sizeof (struct sgentry64)); | 
|  | BUG_ON (fibsize > (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerCommand64, | 
|  | cmd_fibcontext, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) scsicmd); | 
|  | } else { | 
|  | struct aac_read *readcmd; | 
|  | readcmd = (struct aac_read *) fib_data(cmd_fibcontext); | 
|  | readcmd->command = cpu_to_le32(VM_CtBlockRead); | 
|  | readcmd->cid = cpu_to_le32(cid); | 
|  | readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | readcmd->count = cpu_to_le32(count * 512); | 
|  |  | 
|  | aac_build_sg(scsicmd, &readcmd->sg); | 
|  | fibsize = sizeof(struct aac_read) + | 
|  | ((le32_to_cpu(readcmd->sg.count) - 1) * | 
|  | sizeof (struct sgentry)); | 
|  | BUG_ON (fibsize > (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | cmd_fibcontext, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) scsicmd); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status); | 
|  | /* | 
|  | *	For some reason, the Fib didn't queue, return QUEUE_FULL | 
|  | */ | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int aac_write(struct scsi_cmnd * scsicmd, int cid) | 
|  | { | 
|  | u64 lba; | 
|  | u32 count; | 
|  | int status; | 
|  | u16 fibsize; | 
|  | struct aac_dev *dev; | 
|  | struct fib * cmd_fibcontext; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | /* | 
|  | *	Get block address and transfer length | 
|  | */ | 
|  | if (scsicmd->cmnd[0] == WRITE_6)	/* 6 byte command */ | 
|  | { | 
|  | lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | 
|  | count = scsicmd->cmnd[4]; | 
|  | if (count == 0) | 
|  | count = 256; | 
|  | } else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */ | 
|  | dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", cid)); | 
|  |  | 
|  | lba = 	((u64)scsicmd->cmnd[2] << 56) | | 
|  | ((u64)scsicmd->cmnd[3] << 48) | | 
|  | ((u64)scsicmd->cmnd[4] << 40) | | 
|  | ((u64)scsicmd->cmnd[5] << 32) | | 
|  | ((u64)scsicmd->cmnd[6] << 24) | | 
|  | (scsicmd->cmnd[7] << 16) | | 
|  | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) | | 
|  | (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; | 
|  | } else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */ | 
|  | dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", cid)); | 
|  |  | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | 
|  | | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16) | 
|  | | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | } else { | 
|  | dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", cid)); | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; | 
|  | } | 
|  | dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n", | 
|  | smp_processor_id(), (unsigned long long)lba, jiffies)); | 
|  | if ((!(dev->raw_io_interface) || !(dev->raw_io_64)) | 
|  | && (lba & 0xffffffff00000000LL)) { | 
|  | dprintk((KERN_DEBUG "aac_write: Illegal lba\n")); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | 
|  | HARDWARE_ERROR, | 
|  | SENCODE_INTERNAL_TARGET_FAILURE, | 
|  | ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, | 
|  | 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | 
|  | ? sizeof(scsicmd->sense_buffer) | 
|  | : sizeof(dev->fsa_dev[cid].sense_data)); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | /* | 
|  | *	Allocate and initialize a Fib then setup a BlockWrite command | 
|  | */ | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | 
|  | scsicmd->result = DID_ERROR << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | aac_fib_init(cmd_fibcontext); | 
|  |  | 
|  | if (dev->raw_io_interface) { | 
|  | struct aac_raw_io *writecmd; | 
|  | writecmd = (struct aac_raw_io *) fib_data(cmd_fibcontext); | 
|  | writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); | 
|  | writecmd->count = cpu_to_le32(count<<9); | 
|  | writecmd->cid = cpu_to_le16(cid); | 
|  | writecmd->flags = 0; | 
|  | writecmd->bpTotal = 0; | 
|  | writecmd->bpComplete = 0; | 
|  |  | 
|  | aac_build_sgraw(scsicmd, &writecmd->sg); | 
|  | fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentryraw)); | 
|  | BUG_ON(fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerRawIo, | 
|  | cmd_fibcontext, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) scsicmd); | 
|  | } else if (dev->dac_support == 1) { | 
|  | struct aac_write64 *writecmd; | 
|  | writecmd = (struct aac_write64 *) fib_data(cmd_fibcontext); | 
|  | writecmd->command = cpu_to_le32(VM_CtHostWrite64); | 
|  | writecmd->cid = cpu_to_le16(cid); | 
|  | writecmd->sector_count = cpu_to_le16(count); | 
|  | writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | writecmd->pad	= 0; | 
|  | writecmd->flags	= 0; | 
|  |  | 
|  | aac_build_sg64(scsicmd, &writecmd->sg); | 
|  | fibsize = sizeof(struct aac_write64) + | 
|  | ((le32_to_cpu(writecmd->sg.count) - 1) * | 
|  | sizeof (struct sgentry64)); | 
|  | BUG_ON (fibsize > (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerCommand64, | 
|  | cmd_fibcontext, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) scsicmd); | 
|  | } else { | 
|  | struct aac_write *writecmd; | 
|  | writecmd = (struct aac_write *) fib_data(cmd_fibcontext); | 
|  | writecmd->command = cpu_to_le32(VM_CtBlockWrite); | 
|  | writecmd->cid = cpu_to_le32(cid); | 
|  | writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | writecmd->count = cpu_to_le32(count * 512); | 
|  | writecmd->sg.count = cpu_to_le32(1); | 
|  | /* ->stable is not used - it did mean which type of write */ | 
|  |  | 
|  | aac_build_sg(scsicmd, &writecmd->sg); | 
|  | fibsize = sizeof(struct aac_write) + | 
|  | ((le32_to_cpu(writecmd->sg.count) - 1) * | 
|  | sizeof (struct sgentry)); | 
|  | BUG_ON (fibsize > (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | cmd_fibcontext, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) scsicmd); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status); | 
|  | /* | 
|  | *	For some reason, the Fib didn't queue, return QUEUE_FULL | 
|  | */ | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void synchronize_callback(void *context, struct fib *fibptr) | 
|  | { | 
|  | struct aac_synchronize_reply *synchronizereply; | 
|  | struct scsi_cmnd *cmd; | 
|  |  | 
|  | cmd = context; | 
|  | cmd->SCp.phase = AAC_OWNER_MIDLEVEL; | 
|  |  | 
|  | dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n", | 
|  | smp_processor_id(), jiffies)); | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  |  | 
|  | synchronizereply = fib_data(fibptr); | 
|  | if (le32_to_cpu(synchronizereply->status) == CT_OK) | 
|  | cmd->result = DID_OK << 16 | | 
|  | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | else { | 
|  | struct scsi_device *sdev = cmd->device; | 
|  | struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; | 
|  | u32 cid = sdev_id(sdev); | 
|  | printk(KERN_WARNING | 
|  | "synchronize_callback: synchronize failed, status = %d\n", | 
|  | le32_to_cpu(synchronizereply->status)); | 
|  | cmd->result = DID_OK << 16 | | 
|  | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense((u8 *)&dev->fsa_dev[cid].sense_data, | 
|  | HARDWARE_ERROR, | 
|  | SENCODE_INTERNAL_TARGET_FAILURE, | 
|  | ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, | 
|  | 0, 0); | 
|  | memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | min(sizeof(dev->fsa_dev[cid].sense_data), | 
|  | sizeof(cmd->sense_buffer))); | 
|  | } | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | cmd->scsi_done(cmd); | 
|  | } | 
|  |  | 
|  | static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid) | 
|  | { | 
|  | int status; | 
|  | struct fib *cmd_fibcontext; | 
|  | struct aac_synchronize *synchronizecmd; | 
|  | struct scsi_cmnd *cmd; | 
|  | struct scsi_device *sdev = scsicmd->device; | 
|  | int active = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* | 
|  | * Wait for all outstanding queued commands to complete to this | 
|  | * specific target (block). | 
|  | */ | 
|  | spin_lock_irqsave(&sdev->list_lock, flags); | 
|  | list_for_each_entry(cmd, &sdev->cmd_list, list) | 
|  | if (cmd != scsicmd && cmd->SCp.phase == AAC_OWNER_FIRMWARE) { | 
|  | ++active; | 
|  | break; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&sdev->list_lock, flags); | 
|  |  | 
|  | /* | 
|  | *	Yield the processor (requeue for later) | 
|  | */ | 
|  | if (active) | 
|  | return SCSI_MLQUEUE_DEVICE_BUSY; | 
|  |  | 
|  | /* | 
|  | *	Allocate and initialize a Fib | 
|  | */ | 
|  | if (!(cmd_fibcontext = | 
|  | aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  |  | 
|  | aac_fib_init(cmd_fibcontext); | 
|  |  | 
|  | synchronizecmd = fib_data(cmd_fibcontext); | 
|  | synchronizecmd->command = cpu_to_le32(VM_ContainerConfig); | 
|  | synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE); | 
|  | synchronizecmd->cid = cpu_to_le32(cid); | 
|  | synchronizecmd->count = | 
|  | cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data)); | 
|  |  | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | cmd_fibcontext, | 
|  | sizeof(struct aac_synchronize), | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback)synchronize_callback, | 
|  | (void *)scsicmd); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING | 
|  | "aac_synchronize: aac_fib_send failed with status: %d.\n", status); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_scsi_cmd()		-	Process SCSI command | 
|  | *	@scsicmd:		SCSI command block | 
|  | * | 
|  | *	Emulate a SCSI command and queue the required request for the | 
|  | *	aacraid firmware. | 
|  | */ | 
|  |  | 
|  | int aac_scsi_cmd(struct scsi_cmnd * scsicmd) | 
|  | { | 
|  | u32 cid = 0; | 
|  | struct Scsi_Host *host = scsicmd->device->host; | 
|  | struct aac_dev *dev = (struct aac_dev *)host->hostdata; | 
|  | struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev; | 
|  |  | 
|  | /* | 
|  | *	If the bus, id or lun is out of range, return fail | 
|  | *	Test does not apply to ID 16, the pseudo id for the controller | 
|  | *	itself. | 
|  | */ | 
|  | if (scmd_id(scsicmd) != host->this_id) { | 
|  | if ((scmd_channel(scsicmd) == CONTAINER_CHANNEL)) { | 
|  | if((scmd_id(scsicmd) >= dev->maximum_num_containers) || | 
|  | (scsicmd->device->lun != 0)) { | 
|  | scsicmd->result = DID_NO_CONNECT << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | cid = scmd_id(scsicmd); | 
|  |  | 
|  | /* | 
|  | *	If the target container doesn't exist, it may have | 
|  | *	been newly created | 
|  | */ | 
|  | if ((fsa_dev_ptr[cid].valid & 1) == 0) { | 
|  | switch (scsicmd->cmnd[0]) { | 
|  | case SERVICE_ACTION_IN: | 
|  | if (!(dev->raw_io_interface) || | 
|  | !(dev->raw_io_64) || | 
|  | ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) | 
|  | break; | 
|  | case INQUIRY: | 
|  | case READ_CAPACITY: | 
|  | case TEST_UNIT_READY: | 
|  | spin_unlock_irq(host->host_lock); | 
|  | aac_probe_container(dev, cid); | 
|  | if ((fsa_dev_ptr[cid].valid & 1) == 0) | 
|  | fsa_dev_ptr[cid].valid = 0; | 
|  | spin_lock_irq(host->host_lock); | 
|  | if (fsa_dev_ptr[cid].valid == 0) { | 
|  | scsicmd->result = DID_NO_CONNECT << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | /* | 
|  | *	If the target container still doesn't exist, | 
|  | *	return failure | 
|  | */ | 
|  | if (fsa_dev_ptr[cid].valid == 0) { | 
|  | scsicmd->result = DID_BAD_TARGET << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | } else {  /* check for physical non-dasd devices */ | 
|  | if(dev->nondasd_support == 1){ | 
|  | return aac_send_srb_fib(scsicmd); | 
|  | } else { | 
|  | scsicmd->result = DID_NO_CONNECT << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | /* | 
|  | * else Command for the controller itself | 
|  | */ | 
|  | else if ((scsicmd->cmnd[0] != INQUIRY) &&	/* only INQUIRY & TUR cmnd supported for controller */ | 
|  | (scsicmd->cmnd[0] != TEST_UNIT_READY)) | 
|  | { | 
|  | dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0])); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | 
|  | ILLEGAL_REQUEST, | 
|  | SENCODE_INVALID_COMMAND, | 
|  | ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | 
|  | ? sizeof(scsicmd->sense_buffer) | 
|  | : sizeof(dev->fsa_dev[cid].sense_data)); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Handle commands here that don't really require going out to the adapter */ | 
|  | switch (scsicmd->cmnd[0]) { | 
|  | case INQUIRY: | 
|  | { | 
|  | struct inquiry_data inq_data; | 
|  |  | 
|  | dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", scmd_id(scsicmd))); | 
|  | memset(&inq_data, 0, sizeof (struct inquiry_data)); | 
|  |  | 
|  | inq_data.inqd_ver = 2;	/* claim compliance to SCSI-2 */ | 
|  | inq_data.inqd_rdf = 2;	/* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */ | 
|  | inq_data.inqd_len = 31; | 
|  | /*Format for "pad2" is  RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */ | 
|  | inq_data.inqd_pad2= 0x32 ;	 /*WBus16|Sync|CmdQue */ | 
|  | /* | 
|  | *	Set the Vendor, Product, and Revision Level | 
|  | *	see: <vendor>.c i.e. aac.c | 
|  | */ | 
|  | if (scmd_id(scsicmd) == host->this_id) { | 
|  | setinqstr(dev, (void *) (inq_data.inqd_vid), ARRAY_SIZE(container_types)); | 
|  | inq_data.inqd_pdt = INQD_PDT_PROC;	/* Processor device */ | 
|  | aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data)); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type); | 
|  | inq_data.inqd_pdt = INQD_PDT_DA;	/* Direct/random access device */ | 
|  | aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data)); | 
|  | return aac_get_container_name(scsicmd, cid); | 
|  | } | 
|  | case SERVICE_ACTION_IN: | 
|  | if (!(dev->raw_io_interface) || | 
|  | !(dev->raw_io_64) || | 
|  | ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) | 
|  | break; | 
|  | { | 
|  | u64 capacity; | 
|  | char cp[13]; | 
|  |  | 
|  | dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n")); | 
|  | capacity = fsa_dev_ptr[cid].size - 1; | 
|  | cp[0] = (capacity >> 56) & 0xff; | 
|  | cp[1] = (capacity >> 48) & 0xff; | 
|  | cp[2] = (capacity >> 40) & 0xff; | 
|  | cp[3] = (capacity >> 32) & 0xff; | 
|  | cp[4] = (capacity >> 24) & 0xff; | 
|  | cp[5] = (capacity >> 16) & 0xff; | 
|  | cp[6] = (capacity >> 8) & 0xff; | 
|  | cp[7] = (capacity >> 0) & 0xff; | 
|  | cp[8] = 0; | 
|  | cp[9] = 0; | 
|  | cp[10] = 2; | 
|  | cp[11] = 0; | 
|  | cp[12] = 0; | 
|  | aac_internal_transfer(scsicmd, cp, 0, | 
|  | min_t(size_t, scsicmd->cmnd[13], sizeof(cp))); | 
|  | if (sizeof(cp) < scsicmd->cmnd[13]) { | 
|  | unsigned int len, offset = sizeof(cp); | 
|  |  | 
|  | memset(cp, 0, offset); | 
|  | do { | 
|  | len = min_t(size_t, scsicmd->cmnd[13] - offset, | 
|  | sizeof(cp)); | 
|  | aac_internal_transfer(scsicmd, cp, offset, len); | 
|  | } while ((offset += len) < scsicmd->cmnd[13]); | 
|  | } | 
|  |  | 
|  | /* Do not cache partition table for arrays */ | 
|  | scsicmd->device->removable = 1; | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | case READ_CAPACITY: | 
|  | { | 
|  | u32 capacity; | 
|  | char cp[8]; | 
|  |  | 
|  | dprintk((KERN_DEBUG "READ CAPACITY command.\n")); | 
|  | if (fsa_dev_ptr[cid].size <= 0x100000000ULL) | 
|  | capacity = fsa_dev_ptr[cid].size - 1; | 
|  | else | 
|  | capacity = (u32)-1; | 
|  |  | 
|  | cp[0] = (capacity >> 24) & 0xff; | 
|  | cp[1] = (capacity >> 16) & 0xff; | 
|  | cp[2] = (capacity >> 8) & 0xff; | 
|  | cp[3] = (capacity >> 0) & 0xff; | 
|  | cp[4] = 0; | 
|  | cp[5] = 0; | 
|  | cp[6] = 2; | 
|  | cp[7] = 0; | 
|  | aac_internal_transfer(scsicmd, cp, 0, sizeof(cp)); | 
|  | /* Do not cache partition table for arrays */ | 
|  | scsicmd->device->removable = 1; | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | case MODE_SENSE: | 
|  | { | 
|  | char mode_buf[4]; | 
|  |  | 
|  | dprintk((KERN_DEBUG "MODE SENSE command.\n")); | 
|  | mode_buf[0] = 3;	/* Mode data length */ | 
|  | mode_buf[1] = 0;	/* Medium type - default */ | 
|  | mode_buf[2] = 0;	/* Device-specific param, bit 8: 0/1 = write enabled/protected */ | 
|  | mode_buf[3] = 0;	/* Block descriptor length */ | 
|  |  | 
|  | aac_internal_transfer(scsicmd, mode_buf, 0, sizeof(mode_buf)); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | case MODE_SENSE_10: | 
|  | { | 
|  | char mode_buf[8]; | 
|  |  | 
|  | dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n")); | 
|  | mode_buf[0] = 0;	/* Mode data length (MSB) */ | 
|  | mode_buf[1] = 6;	/* Mode data length (LSB) */ | 
|  | mode_buf[2] = 0;	/* Medium type - default */ | 
|  | mode_buf[3] = 0;	/* Device-specific param, bit 8: 0/1 = write enabled/protected */ | 
|  | mode_buf[4] = 0;	/* reserved */ | 
|  | mode_buf[5] = 0;	/* reserved */ | 
|  | mode_buf[6] = 0;	/* Block descriptor length (MSB) */ | 
|  | mode_buf[7] = 0;	/* Block descriptor length (LSB) */ | 
|  | aac_internal_transfer(scsicmd, mode_buf, 0, sizeof(mode_buf)); | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | case REQUEST_SENSE: | 
|  | dprintk((KERN_DEBUG "REQUEST SENSE command.\n")); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, sizeof (struct sense_data)); | 
|  | memset(&dev->fsa_dev[cid].sense_data, 0, sizeof (struct sense_data)); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  |  | 
|  | case ALLOW_MEDIUM_REMOVAL: | 
|  | dprintk((KERN_DEBUG "LOCK command.\n")); | 
|  | if (scsicmd->cmnd[4]) | 
|  | fsa_dev_ptr[cid].locked = 1; | 
|  | else | 
|  | fsa_dev_ptr[cid].locked = 0; | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | /* | 
|  | *	These commands are all No-Ops | 
|  | */ | 
|  | case TEST_UNIT_READY: | 
|  | case RESERVE: | 
|  | case RELEASE: | 
|  | case REZERO_UNIT: | 
|  | case REASSIGN_BLOCKS: | 
|  | case SEEK_10: | 
|  | case START_STOP: | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | switch (scsicmd->cmnd[0]) | 
|  | { | 
|  | case READ_6: | 
|  | case READ_10: | 
|  | case READ_12: | 
|  | case READ_16: | 
|  | /* | 
|  | *	Hack to keep track of ordinal number of the device that | 
|  | *	corresponds to a container. Needed to convert | 
|  | *	containers to /dev/sd device names | 
|  | */ | 
|  |  | 
|  | if (scsicmd->request->rq_disk) | 
|  | strlcpy(fsa_dev_ptr[cid].devname, | 
|  | scsicmd->request->rq_disk->disk_name, | 
|  | min(sizeof(fsa_dev_ptr[cid].devname), | 
|  | sizeof(scsicmd->request->rq_disk->disk_name) + 1)); | 
|  |  | 
|  | return aac_read(scsicmd, cid); | 
|  |  | 
|  | case WRITE_6: | 
|  | case WRITE_10: | 
|  | case WRITE_12: | 
|  | case WRITE_16: | 
|  | return aac_write(scsicmd, cid); | 
|  |  | 
|  | case SYNCHRONIZE_CACHE: | 
|  | /* Issue FIB to tell Firmware to flush it's cache */ | 
|  | return aac_synchronize(scsicmd, cid); | 
|  |  | 
|  | default: | 
|  | /* | 
|  | *	Unhandled commands | 
|  | */ | 
|  | dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0])); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | 
|  | ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, | 
|  | ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | 
|  | ? sizeof(scsicmd->sense_buffer) | 
|  | : sizeof(dev->fsa_dev[cid].sense_data)); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int query_disk(struct aac_dev *dev, void __user *arg) | 
|  | { | 
|  | struct aac_query_disk qd; | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  |  | 
|  | fsa_dev_ptr = dev->fsa_dev; | 
|  | if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk))) | 
|  | return -EFAULT; | 
|  | if (qd.cnum == -1) | 
|  | qd.cnum = qd.id; | 
|  | else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1)) | 
|  | { | 
|  | if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers) | 
|  | return -EINVAL; | 
|  | qd.instance = dev->scsi_host_ptr->host_no; | 
|  | qd.bus = 0; | 
|  | qd.id = CONTAINER_TO_ID(qd.cnum); | 
|  | qd.lun = CONTAINER_TO_LUN(qd.cnum); | 
|  | } | 
|  | else return -EINVAL; | 
|  |  | 
|  | qd.valid = fsa_dev_ptr[qd.cnum].valid; | 
|  | qd.locked = fsa_dev_ptr[qd.cnum].locked; | 
|  | qd.deleted = fsa_dev_ptr[qd.cnum].deleted; | 
|  |  | 
|  | if (fsa_dev_ptr[qd.cnum].devname[0] == '\0') | 
|  | qd.unmapped = 1; | 
|  | else | 
|  | qd.unmapped = 0; | 
|  |  | 
|  | strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname, | 
|  | min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1)); | 
|  |  | 
|  | if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int force_delete_disk(struct aac_dev *dev, void __user *arg) | 
|  | { | 
|  | struct aac_delete_disk dd; | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  |  | 
|  | fsa_dev_ptr = dev->fsa_dev; | 
|  |  | 
|  | if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk))) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (dd.cnum >= dev->maximum_num_containers) | 
|  | return -EINVAL; | 
|  | /* | 
|  | *	Mark this container as being deleted. | 
|  | */ | 
|  | fsa_dev_ptr[dd.cnum].deleted = 1; | 
|  | /* | 
|  | *	Mark the container as no longer valid | 
|  | */ | 
|  | fsa_dev_ptr[dd.cnum].valid = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int delete_disk(struct aac_dev *dev, void __user *arg) | 
|  | { | 
|  | struct aac_delete_disk dd; | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  |  | 
|  | fsa_dev_ptr = dev->fsa_dev; | 
|  |  | 
|  | if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk))) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (dd.cnum >= dev->maximum_num_containers) | 
|  | return -EINVAL; | 
|  | /* | 
|  | *	If the container is locked, it can not be deleted by the API. | 
|  | */ | 
|  | if (fsa_dev_ptr[dd.cnum].locked) | 
|  | return -EBUSY; | 
|  | else { | 
|  | /* | 
|  | *	Mark the container as no longer being valid. | 
|  | */ | 
|  | fsa_dev_ptr[dd.cnum].valid = 0; | 
|  | fsa_dev_ptr[dd.cnum].devname[0] = '\0'; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg) | 
|  | { | 
|  | switch (cmd) { | 
|  | case FSACTL_QUERY_DISK: | 
|  | return query_disk(dev, arg); | 
|  | case FSACTL_DELETE_DISK: | 
|  | return delete_disk(dev, arg); | 
|  | case FSACTL_FORCE_DELETE_DISK: | 
|  | return force_delete_disk(dev, arg); | 
|  | case FSACTL_GET_CONTAINERS: | 
|  | return aac_get_containers(dev); | 
|  | default: | 
|  | return -ENOTTY; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * | 
|  | * aac_srb_callback | 
|  | * @context: the context set in the fib - here it is scsi cmd | 
|  | * @fibptr: pointer to the fib | 
|  | * | 
|  | * Handles the completion of a scsi command to a non dasd device | 
|  | * | 
|  | */ | 
|  |  | 
|  | static void aac_srb_callback(void *context, struct fib * fibptr) | 
|  | { | 
|  | struct aac_dev *dev; | 
|  | struct aac_srb_reply *srbreply; | 
|  | struct scsi_cmnd *scsicmd; | 
|  |  | 
|  | scsicmd = (struct scsi_cmnd *) context; | 
|  | scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL; | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  |  | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  | srbreply = (struct aac_srb_reply *) fib_data(fibptr); | 
|  |  | 
|  | scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */ | 
|  | /* | 
|  | *	Calculate resid for sg | 
|  | */ | 
|  |  | 
|  | scsicmd->resid = scsicmd->request_bufflen - | 
|  | le32_to_cpu(srbreply->data_xfer_length); | 
|  |  | 
|  | if(scsicmd->use_sg) | 
|  | pci_unmap_sg(dev->pdev, | 
|  | (struct scatterlist *)scsicmd->request_buffer, | 
|  | scsicmd->use_sg, | 
|  | scsicmd->sc_data_direction); | 
|  | else if(scsicmd->request_bufflen) | 
|  | pci_unmap_single(dev->pdev, scsicmd->SCp.dma_handle, scsicmd->request_bufflen, | 
|  | scsicmd->sc_data_direction); | 
|  |  | 
|  | /* | 
|  | * First check the fib status | 
|  | */ | 
|  |  | 
|  | if (le32_to_cpu(srbreply->status) != ST_OK){ | 
|  | int len; | 
|  | printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status)); | 
|  | len = (le32_to_cpu(srbreply->sense_data_size) > | 
|  | sizeof(scsicmd->sense_buffer)) ? | 
|  | sizeof(scsicmd->sense_buffer) : | 
|  | le32_to_cpu(srbreply->sense_data_size); | 
|  | scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Next check the srb status | 
|  | */ | 
|  | switch( (le32_to_cpu(srbreply->srb_status))&0x3f){ | 
|  | case SRB_STATUS_ERROR_RECOVERY: | 
|  | case SRB_STATUS_PENDING: | 
|  | case SRB_STATUS_SUCCESS: | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | case SRB_STATUS_DATA_OVERRUN: | 
|  | switch(scsicmd->cmnd[0]){ | 
|  | case  READ_6: | 
|  | case  WRITE_6: | 
|  | case  READ_10: | 
|  | case  WRITE_10: | 
|  | case  READ_12: | 
|  | case  WRITE_12: | 
|  | case  READ_16: | 
|  | case  WRITE_16: | 
|  | if(le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow ) { | 
|  | printk(KERN_WARNING"aacraid: SCSI CMD underflow\n"); | 
|  | } else { | 
|  | printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n"); | 
|  | } | 
|  | scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | case INQUIRY: { | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | } | 
|  | default: | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case SRB_STATUS_ABORTED: | 
|  | scsicmd->result = DID_ABORT << 16 | ABORT << 8; | 
|  | break; | 
|  | case SRB_STATUS_ABORT_FAILED: | 
|  | // Not sure about this one - but assuming the hba was trying to abort for some reason | 
|  | scsicmd->result = DID_ERROR << 16 | ABORT << 8; | 
|  | break; | 
|  | case SRB_STATUS_PARITY_ERROR: | 
|  | scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8; | 
|  | break; | 
|  | case SRB_STATUS_NO_DEVICE: | 
|  | case SRB_STATUS_INVALID_PATH_ID: | 
|  | case SRB_STATUS_INVALID_TARGET_ID: | 
|  | case SRB_STATUS_INVALID_LUN: | 
|  | case SRB_STATUS_SELECTION_TIMEOUT: | 
|  | scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  |  | 
|  | case SRB_STATUS_COMMAND_TIMEOUT: | 
|  | case SRB_STATUS_TIMEOUT: | 
|  | scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  |  | 
|  | case SRB_STATUS_BUSY: | 
|  | scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  |  | 
|  | case SRB_STATUS_BUS_RESET: | 
|  | scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  |  | 
|  | case SRB_STATUS_MESSAGE_REJECTED: | 
|  | scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8; | 
|  | break; | 
|  | case SRB_STATUS_REQUEST_FLUSHED: | 
|  | case SRB_STATUS_ERROR: | 
|  | case SRB_STATUS_INVALID_REQUEST: | 
|  | case SRB_STATUS_REQUEST_SENSE_FAILED: | 
|  | case SRB_STATUS_NO_HBA: | 
|  | case SRB_STATUS_UNEXPECTED_BUS_FREE: | 
|  | case SRB_STATUS_PHASE_SEQUENCE_FAILURE: | 
|  | case SRB_STATUS_BAD_SRB_BLOCK_LENGTH: | 
|  | case SRB_STATUS_DELAYED_RETRY: | 
|  | case SRB_STATUS_BAD_FUNCTION: | 
|  | case SRB_STATUS_NOT_STARTED: | 
|  | case SRB_STATUS_NOT_IN_USE: | 
|  | case SRB_STATUS_FORCE_ABORT: | 
|  | case SRB_STATUS_DOMAIN_VALIDATION_FAIL: | 
|  | default: | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  | printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n", | 
|  | le32_to_cpu(srbreply->srb_status) & 0x3F, | 
|  | aac_get_status_string( | 
|  | le32_to_cpu(srbreply->srb_status) & 0x3F), | 
|  | scsicmd->cmnd[0], | 
|  | le32_to_cpu(srbreply->scsi_status)); | 
|  | #endif | 
|  | scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | } | 
|  | if (le32_to_cpu(srbreply->scsi_status) == 0x02 ){  // Check Condition | 
|  | int len; | 
|  | scsicmd->result |= SAM_STAT_CHECK_CONDITION; | 
|  | len = (le32_to_cpu(srbreply->sense_data_size) > | 
|  | sizeof(scsicmd->sense_buffer)) ? | 
|  | sizeof(scsicmd->sense_buffer) : | 
|  | le32_to_cpu(srbreply->sense_data_size); | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  | printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n", | 
|  | le32_to_cpu(srbreply->status), len); | 
|  | #endif | 
|  | memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); | 
|  |  | 
|  | } | 
|  | /* | 
|  | * OR in the scsi status (already shifted up a bit) | 
|  | */ | 
|  | scsicmd->result |= le32_to_cpu(srbreply->scsi_status); | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * | 
|  | * aac_send_scb_fib | 
|  | * @scsicmd: the scsi command block | 
|  | * | 
|  | * This routine will form a FIB and fill in the aac_srb from the | 
|  | * scsicmd passed in. | 
|  | */ | 
|  |  | 
|  | static int aac_send_srb_fib(struct scsi_cmnd* scsicmd) | 
|  | { | 
|  | struct fib* cmd_fibcontext; | 
|  | struct aac_dev* dev; | 
|  | int status; | 
|  | struct aac_srb *srbcmd; | 
|  | u16 fibsize; | 
|  | u32 flag; | 
|  | u32 timeout; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | if (scmd_id(scsicmd) >= dev->maximum_num_physicals || | 
|  | scsicmd->device->lun > 7) { | 
|  | scsicmd->result = DID_NO_CONNECT << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | switch(scsicmd->sc_data_direction){ | 
|  | case DMA_TO_DEVICE: | 
|  | flag = SRB_DataOut; | 
|  | break; | 
|  | case DMA_BIDIRECTIONAL: | 
|  | flag = SRB_DataIn | SRB_DataOut; | 
|  | break; | 
|  | case DMA_FROM_DEVICE: | 
|  | flag = SRB_DataIn; | 
|  | break; | 
|  | case DMA_NONE: | 
|  | default:	/* shuts up some versions of gcc */ | 
|  | flag = SRB_NoDataXfer; | 
|  | break; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *	Allocate and initialize a Fib then setup a BlockWrite command | 
|  | */ | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | 
|  | return -1; | 
|  | } | 
|  | aac_fib_init(cmd_fibcontext); | 
|  |  | 
|  | srbcmd = (struct aac_srb*) fib_data(cmd_fibcontext); | 
|  | srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); | 
|  | srbcmd->channel  = cpu_to_le32(aac_logical_to_phys(scmd_channel(scsicmd))); | 
|  | srbcmd->id   = cpu_to_le32(scmd_id(scsicmd)); | 
|  | srbcmd->lun      = cpu_to_le32(scsicmd->device->lun); | 
|  | srbcmd->flags    = cpu_to_le32(flag); | 
|  | timeout = scsicmd->timeout_per_command/HZ; | 
|  | if(timeout == 0){ | 
|  | timeout = 1; | 
|  | } | 
|  | srbcmd->timeout  = cpu_to_le32(timeout);  // timeout in seconds | 
|  | srbcmd->retry_limit = 0; /* Obsolete parameter */ | 
|  | srbcmd->cdb_size = cpu_to_le32(scsicmd->cmd_len); | 
|  |  | 
|  | if( dev->dac_support == 1 ) { | 
|  | aac_build_sg64(scsicmd, (struct sgmap64*) &srbcmd->sg); | 
|  | srbcmd->count = cpu_to_le32(scsicmd->request_bufflen); | 
|  |  | 
|  | memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb)); | 
|  | memcpy(srbcmd->cdb, scsicmd->cmnd, scsicmd->cmd_len); | 
|  | /* | 
|  | *	Build Scatter/Gather list | 
|  | */ | 
|  | fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) + | 
|  | ((le32_to_cpu(srbcmd->sg.count) & 0xff) * | 
|  | sizeof (struct sgentry64)); | 
|  | BUG_ON (fibsize > (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  |  | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ScsiPortCommand64, cmd_fibcontext, | 
|  | fibsize, FsaNormal, 0, 1, | 
|  | (fib_callback) aac_srb_callback, | 
|  | (void *) scsicmd); | 
|  | } else { | 
|  | aac_build_sg(scsicmd, (struct sgmap*)&srbcmd->sg); | 
|  | srbcmd->count = cpu_to_le32(scsicmd->request_bufflen); | 
|  |  | 
|  | memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb)); | 
|  | memcpy(srbcmd->cdb, scsicmd->cmnd, scsicmd->cmd_len); | 
|  | /* | 
|  | *	Build Scatter/Gather list | 
|  | */ | 
|  | fibsize = sizeof (struct aac_srb) + | 
|  | (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) * | 
|  | sizeof (struct sgentry)); | 
|  | BUG_ON (fibsize > (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  |  | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ScsiPortCommand, cmd_fibcontext, fibsize, FsaNormal, 0, 1, | 
|  | (fib_callback) aac_srb_callback, (void *) scsicmd); | 
|  | } | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg) | 
|  | { | 
|  | struct aac_dev *dev; | 
|  | unsigned long byte_count = 0; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | // Get rid of old data | 
|  | psg->count = 0; | 
|  | psg->sg[0].addr = 0; | 
|  | psg->sg[0].count = 0; | 
|  | if (scsicmd->use_sg) { | 
|  | struct scatterlist *sg; | 
|  | int i; | 
|  | int sg_count; | 
|  | sg = (struct scatterlist *) scsicmd->request_buffer; | 
|  |  | 
|  | sg_count = pci_map_sg(dev->pdev, sg, scsicmd->use_sg, | 
|  | scsicmd->sc_data_direction); | 
|  | psg->count = cpu_to_le32(sg_count); | 
|  |  | 
|  | for (i = 0; i < sg_count; i++) { | 
|  | psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg)); | 
|  | psg->sg[i].count = cpu_to_le32(sg_dma_len(sg)); | 
|  | byte_count += sg_dma_len(sg); | 
|  | sg++; | 
|  | } | 
|  | /* hba wants the size to be exact */ | 
|  | if(byte_count > scsicmd->request_bufflen){ | 
|  | u32 temp = le32_to_cpu(psg->sg[i-1].count) - | 
|  | (byte_count - scsicmd->request_bufflen); | 
|  | psg->sg[i-1].count = cpu_to_le32(temp); | 
|  | byte_count = scsicmd->request_bufflen; | 
|  | } | 
|  | /* Check for command underflow */ | 
|  | if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | 
|  | printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | 
|  | byte_count, scsicmd->underflow); | 
|  | } | 
|  | } | 
|  | else if(scsicmd->request_bufflen) { | 
|  | u32 addr; | 
|  | scsicmd->SCp.dma_handle = pci_map_single(dev->pdev, | 
|  | scsicmd->request_buffer, | 
|  | scsicmd->request_bufflen, | 
|  | scsicmd->sc_data_direction); | 
|  | addr = scsicmd->SCp.dma_handle; | 
|  | psg->count = cpu_to_le32(1); | 
|  | psg->sg[0].addr = cpu_to_le32(addr); | 
|  | psg->sg[0].count = cpu_to_le32(scsicmd->request_bufflen); | 
|  | byte_count = scsicmd->request_bufflen; | 
|  | } | 
|  | return byte_count; | 
|  | } | 
|  |  | 
|  |  | 
|  | static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg) | 
|  | { | 
|  | struct aac_dev *dev; | 
|  | unsigned long byte_count = 0; | 
|  | u64 addr; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | // Get rid of old data | 
|  | psg->count = 0; | 
|  | psg->sg[0].addr[0] = 0; | 
|  | psg->sg[0].addr[1] = 0; | 
|  | psg->sg[0].count = 0; | 
|  | if (scsicmd->use_sg) { | 
|  | struct scatterlist *sg; | 
|  | int i; | 
|  | int sg_count; | 
|  | sg = (struct scatterlist *) scsicmd->request_buffer; | 
|  |  | 
|  | sg_count = pci_map_sg(dev->pdev, sg, scsicmd->use_sg, | 
|  | scsicmd->sc_data_direction); | 
|  |  | 
|  | for (i = 0; i < sg_count; i++) { | 
|  | int count = sg_dma_len(sg); | 
|  | addr = sg_dma_address(sg); | 
|  | psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff); | 
|  | psg->sg[i].addr[1] = cpu_to_le32(addr>>32); | 
|  | psg->sg[i].count = cpu_to_le32(count); | 
|  | byte_count += count; | 
|  | sg++; | 
|  | } | 
|  | psg->count = cpu_to_le32(sg_count); | 
|  | /* hba wants the size to be exact */ | 
|  | if(byte_count > scsicmd->request_bufflen){ | 
|  | u32 temp = le32_to_cpu(psg->sg[i-1].count) - | 
|  | (byte_count - scsicmd->request_bufflen); | 
|  | psg->sg[i-1].count = cpu_to_le32(temp); | 
|  | byte_count = scsicmd->request_bufflen; | 
|  | } | 
|  | /* Check for command underflow */ | 
|  | if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | 
|  | printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | 
|  | byte_count, scsicmd->underflow); | 
|  | } | 
|  | } | 
|  | else if(scsicmd->request_bufflen) { | 
|  | scsicmd->SCp.dma_handle = pci_map_single(dev->pdev, | 
|  | scsicmd->request_buffer, | 
|  | scsicmd->request_bufflen, | 
|  | scsicmd->sc_data_direction); | 
|  | addr = scsicmd->SCp.dma_handle; | 
|  | psg->count = cpu_to_le32(1); | 
|  | psg->sg[0].addr[0] = cpu_to_le32(addr & 0xffffffff); | 
|  | psg->sg[0].addr[1] = cpu_to_le32(addr >> 32); | 
|  | psg->sg[0].count = cpu_to_le32(scsicmd->request_bufflen); | 
|  | byte_count = scsicmd->request_bufflen; | 
|  | } | 
|  | return byte_count; | 
|  | } | 
|  |  | 
|  | static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg) | 
|  | { | 
|  | struct Scsi_Host *host = scsicmd->device->host; | 
|  | struct aac_dev *dev = (struct aac_dev *)host->hostdata; | 
|  | unsigned long byte_count = 0; | 
|  |  | 
|  | // Get rid of old data | 
|  | psg->count = 0; | 
|  | psg->sg[0].next = 0; | 
|  | psg->sg[0].prev = 0; | 
|  | psg->sg[0].addr[0] = 0; | 
|  | psg->sg[0].addr[1] = 0; | 
|  | psg->sg[0].count = 0; | 
|  | psg->sg[0].flags = 0; | 
|  | if (scsicmd->use_sg) { | 
|  | struct scatterlist *sg; | 
|  | int i; | 
|  | int sg_count; | 
|  | sg = (struct scatterlist *) scsicmd->request_buffer; | 
|  |  | 
|  | sg_count = pci_map_sg(dev->pdev, sg, scsicmd->use_sg, | 
|  | scsicmd->sc_data_direction); | 
|  |  | 
|  | for (i = 0; i < sg_count; i++) { | 
|  | int count = sg_dma_len(sg); | 
|  | u64 addr = sg_dma_address(sg); | 
|  | psg->sg[i].next = 0; | 
|  | psg->sg[i].prev = 0; | 
|  | psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32)); | 
|  | psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff)); | 
|  | psg->sg[i].count = cpu_to_le32(count); | 
|  | psg->sg[i].flags = 0; | 
|  | byte_count += count; | 
|  | sg++; | 
|  | } | 
|  | psg->count = cpu_to_le32(sg_count); | 
|  | /* hba wants the size to be exact */ | 
|  | if(byte_count > scsicmd->request_bufflen){ | 
|  | u32 temp = le32_to_cpu(psg->sg[i-1].count) - | 
|  | (byte_count - scsicmd->request_bufflen); | 
|  | psg->sg[i-1].count = cpu_to_le32(temp); | 
|  | byte_count = scsicmd->request_bufflen; | 
|  | } | 
|  | /* Check for command underflow */ | 
|  | if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | 
|  | printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | 
|  | byte_count, scsicmd->underflow); | 
|  | } | 
|  | } | 
|  | else if(scsicmd->request_bufflen) { | 
|  | int count; | 
|  | u64 addr; | 
|  | scsicmd->SCp.dma_handle = pci_map_single(dev->pdev, | 
|  | scsicmd->request_buffer, | 
|  | scsicmd->request_bufflen, | 
|  | scsicmd->sc_data_direction); | 
|  | addr = scsicmd->SCp.dma_handle; | 
|  | count = scsicmd->request_bufflen; | 
|  | psg->count = cpu_to_le32(1); | 
|  | psg->sg[0].next = 0; | 
|  | psg->sg[0].prev = 0; | 
|  | psg->sg[0].addr[1] = cpu_to_le32((u32)(addr>>32)); | 
|  | psg->sg[0].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff)); | 
|  | psg->sg[0].count = cpu_to_le32(count); | 
|  | psg->sg[0].flags = 0; | 
|  | byte_count = scsicmd->request_bufflen; | 
|  | } | 
|  | return byte_count; | 
|  | } | 
|  |  | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  |  | 
|  | struct aac_srb_status_info { | 
|  | u32	status; | 
|  | char	*str; | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct aac_srb_status_info srb_status_info[] = { | 
|  | { SRB_STATUS_PENDING,		"Pending Status"}, | 
|  | { SRB_STATUS_SUCCESS,		"Success"}, | 
|  | { SRB_STATUS_ABORTED,		"Aborted Command"}, | 
|  | { SRB_STATUS_ABORT_FAILED,	"Abort Failed"}, | 
|  | { SRB_STATUS_ERROR,		"Error Event"}, | 
|  | { SRB_STATUS_BUSY,		"Device Busy"}, | 
|  | { SRB_STATUS_INVALID_REQUEST,	"Invalid Request"}, | 
|  | { SRB_STATUS_INVALID_PATH_ID,	"Invalid Path ID"}, | 
|  | { SRB_STATUS_NO_DEVICE,		"No Device"}, | 
|  | { SRB_STATUS_TIMEOUT,		"Timeout"}, | 
|  | { SRB_STATUS_SELECTION_TIMEOUT,	"Selection Timeout"}, | 
|  | { SRB_STATUS_COMMAND_TIMEOUT,	"Command Timeout"}, | 
|  | { SRB_STATUS_MESSAGE_REJECTED,	"Message Rejected"}, | 
|  | { SRB_STATUS_BUS_RESET,		"Bus Reset"}, | 
|  | { SRB_STATUS_PARITY_ERROR,	"Parity Error"}, | 
|  | { SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"}, | 
|  | { SRB_STATUS_NO_HBA,		"No HBA"}, | 
|  | { SRB_STATUS_DATA_OVERRUN,	"Data Overrun/Data Underrun"}, | 
|  | { SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"}, | 
|  | { SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"}, | 
|  | { SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"}, | 
|  | { SRB_STATUS_REQUEST_FLUSHED,	"Request Flushed"}, | 
|  | { SRB_STATUS_DELAYED_RETRY,	"Delayed Retry"}, | 
|  | { SRB_STATUS_INVALID_LUN,	"Invalid LUN"}, | 
|  | { SRB_STATUS_INVALID_TARGET_ID,	"Invalid TARGET ID"}, | 
|  | { SRB_STATUS_BAD_FUNCTION,	"Bad Function"}, | 
|  | { SRB_STATUS_ERROR_RECOVERY,	"Error Recovery"}, | 
|  | { SRB_STATUS_NOT_STARTED,	"Not Started"}, | 
|  | { SRB_STATUS_NOT_IN_USE,	"Not In Use"}, | 
|  | { SRB_STATUS_FORCE_ABORT,	"Force Abort"}, | 
|  | { SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"}, | 
|  | { 0xff,				"Unknown Error"} | 
|  | }; | 
|  |  | 
|  | char *aac_get_status_string(u32 status) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(srb_status_info); i++) | 
|  | if (srb_status_info[i].status == status) | 
|  | return srb_status_info[i].str; | 
|  |  | 
|  | return "Bad Status Code"; | 
|  | } | 
|  |  | 
|  | #endif |