|  | /* | 
|  | *  azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168). | 
|  | *  Copyright (C) 2002, 2005 by Andreas Mohr <andi AT lisas.de> | 
|  | * | 
|  | *  Framework borrowed from Bart Hartgers's als4000.c. | 
|  | *  Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801), | 
|  | *  found in a Fujitsu-Siemens PC ("Cordant", aluminum case). | 
|  | *  Other versions are: | 
|  | *  PCI168 A(W), sub ID 1800 | 
|  | *  PCI168 A/AP, sub ID 8000 | 
|  | *  Please give me feedback in case you try my driver with one of these!! | 
|  | * | 
|  | * GPL LICENSE | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2 of the License, or | 
|  | *  (at your option) any later version. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  |  | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; if not, write to the Free Software | 
|  | *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | * | 
|  | * NOTES | 
|  | *  Since Aztech does not provide any chipset documentation, | 
|  | *  even on repeated request to various addresses, | 
|  | *  and the answer that was finally given was negative | 
|  | *  (and I was stupid enough to manage to get hold of a PCI168 soundcard | 
|  | *  in the first place >:-P}), | 
|  | *  I was forced to base this driver on reverse engineering | 
|  | *  (3 weeks' worth of evenings filled with driver work). | 
|  | *  (and no, I did NOT go the easy way: to pick up a SB PCI128 for 9 Euros) | 
|  | * | 
|  | *  The AZF3328 chip (note: AZF3328, *not* AZT3328, that's just the driver name | 
|  | *  for compatibility reasons) has the following features: | 
|  | * | 
|  | *  - builtin AC97 conformant codec (SNR over 80dB) | 
|  | *    Note that "conformant" != "compliant"!! this chip's mixer register layout | 
|  | *    *differs* from the standard AC97 layout: | 
|  | *    they chose to not implement the headphone register (which is not a | 
|  | *    problem since it's merely optional), yet when doing this, they committed | 
|  | *    the grave sin of letting other registers follow immediately instead of | 
|  | *    keeping a headphone dummy register, thereby shifting the mixer register | 
|  | *    addresses illegally. So far unfortunately it looks like the very flexible | 
|  | *    ALSA AC97 support is still not enough to easily compensate for such a | 
|  | *    grave layout violation despite all tweaks and quirks mechanisms it offers. | 
|  | *  - builtin genuine OPL3 | 
|  | *  - full duplex 16bit playback/record at independent sampling rate | 
|  | *  - MPU401 (+ legacy address support) FIXME: how to enable legacy addr?? | 
|  | *  - game port (legacy address support) | 
|  | *  - built-in General DirectX timer having a 20 bits counter | 
|  | *    with 1us resolution (see below!) | 
|  | *  - I2S serial port for external DAC | 
|  | *  - supports 33MHz PCI spec 2.1, PCI power management 1.0, compliant with ACPI | 
|  | *  - supports hardware volume control | 
|  | *  - single chip low cost solution (128 pin QFP) | 
|  | *  - supports programmable Sub-vendor and Sub-system ID | 
|  | *    required for Microsoft's logo compliance (FIXME: where?) | 
|  | *  - PCI168 AP(W) card: power amplifier with 4 Watts/channel at 4 Ohms | 
|  | * | 
|  | *  Note that this driver now is actually *better* than the Windows driver, | 
|  | *  since it additionally supports the card's 1MHz DirectX timer - just try | 
|  | *  the following snd-seq module parameters etc.: | 
|  | *  - options snd-seq seq_default_timer_class=2 seq_default_timer_sclass=0 | 
|  | *    seq_default_timer_card=0 seq_client_load=1 seq_default_timer_device=0 | 
|  | *    seq_default_timer_subdevice=0 seq_default_timer_resolution=1000000 | 
|  | *  - "timidity -iAv -B2,8 -Os -EFreverb=0" | 
|  | *  - "pmidi -p 128:0 jazz.mid" | 
|  | * | 
|  | *  Certain PCI versions of this card are susceptible to DMA traffic underruns | 
|  | *  in some systems (resulting in sound crackling/clicking/popping), | 
|  | *  probably because they don't have a DMA FIFO buffer or so. | 
|  | *  Overview (PCI ID/PCI subID/PCI rev.): | 
|  | *  - no DMA crackling on SiS735: 0x50DC/0x1801/16 | 
|  | *  - unknown performance: 0x50DC/0x1801/10 | 
|  | *    (well, it's not bad on an Athlon 1800 with now very optimized IRQ handler) | 
|  | * | 
|  | *  Crackling happens with VIA chipsets or, in my case, an SiS735, which is | 
|  | *  supposed to be very fast and supposed to get rid of crackling much | 
|  | *  better than a VIA, yet ironically I still get crackling, like many other | 
|  | *  people with the same chipset. | 
|  | *  Possible remedies: | 
|  | *  - plug card into a different PCI slot, preferrably one that isn't shared | 
|  | *    too much (this helps a lot, but not completely!) | 
|  | *  - get rid of PCI VGA card, use AGP instead | 
|  | *  - upgrade or downgrade BIOS | 
|  | *  - fiddle with PCI latency settings (setpci -v -s BUSID latency_timer=XX) | 
|  | *    Not too helpful. | 
|  | *  - Disable ACPI/power management/"Auto Detect RAM/PCI Clk" in BIOS | 
|  | * | 
|  | * BUGS | 
|  | *  - full-duplex might *still* be problematic, not fully tested recently | 
|  | * | 
|  | * TODO | 
|  | *  - test MPU401 MIDI playback etc. | 
|  | *  - add some power micro-management (disable various units of the card | 
|  | *    as long as they're unused). However this requires I/O ports which I | 
|  | *    haven't figured out yet and which thus might not even exist... | 
|  | *    The standard suspend/resume functionality could probably make use of | 
|  | *    some improvement, too... | 
|  | *  - figure out what all unknown port bits are responsible for | 
|  | *  - figure out some cleverly evil scheme to possibly make ALSA AC97 code | 
|  | *    fully accept our quite incompatible ""AC97"" mixer and thus save some | 
|  | *    code (but I'm not too optimistic that doing this is possible at all) | 
|  | */ | 
|  |  | 
|  | #include <sound/driver.h> | 
|  | #include <asm/io.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/gameport.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/control.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/rawmidi.h> | 
|  | #include <sound/mpu401.h> | 
|  | #include <sound/opl3.h> | 
|  | #include <sound/initval.h> | 
|  | #include "azt3328.h" | 
|  |  | 
|  | MODULE_AUTHOR("Andreas Mohr <andi AT lisas.de>"); | 
|  | MODULE_DESCRIPTION("Aztech AZF3328 (PCI168)"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}"); | 
|  |  | 
|  | #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE)) | 
|  | #define SUPPORT_JOYSTICK 1 | 
|  | #endif | 
|  |  | 
|  | #define DEBUG_MISC	0 | 
|  | #define DEBUG_CALLS	0 | 
|  | #define DEBUG_MIXER	0 | 
|  | #define DEBUG_PLAY_REC	0 | 
|  | #define DEBUG_IO	0 | 
|  | #define DEBUG_TIMER	0 | 
|  | #define MIXER_TESTING	0 | 
|  |  | 
|  | #if DEBUG_MISC | 
|  | #define snd_azf3328_dbgmisc(format, args...) printk(KERN_ERR format, ##args) | 
|  | #else | 
|  | #define snd_azf3328_dbgmisc(format, args...) | 
|  | #endif | 
|  |  | 
|  | #if DEBUG_CALLS | 
|  | #define snd_azf3328_dbgcalls(format, args...) printk(format, ##args) | 
|  | #define snd_azf3328_dbgcallenter() printk(KERN_ERR "--> %s\n", __FUNCTION__) | 
|  | #define snd_azf3328_dbgcallleave() printk(KERN_ERR "<-- %s\n", __FUNCTION__) | 
|  | #else | 
|  | #define snd_azf3328_dbgcalls(format, args...) | 
|  | #define snd_azf3328_dbgcallenter() | 
|  | #define snd_azf3328_dbgcallleave() | 
|  | #endif | 
|  |  | 
|  | #if DEBUG_MIXER | 
|  | #define snd_azf3328_dbgmixer(format, args...) printk(format, ##args) | 
|  | #else | 
|  | #define snd_azf3328_dbgmixer(format, args...) | 
|  | #endif | 
|  |  | 
|  | #if DEBUG_PLAY_REC | 
|  | #define snd_azf3328_dbgplay(format, args...) printk(KERN_ERR format, ##args) | 
|  | #else | 
|  | #define snd_azf3328_dbgplay(format, args...) | 
|  | #endif | 
|  |  | 
|  | #if DEBUG_MISC | 
|  | #define snd_azf3328_dbgtimer(format, args...) printk(KERN_ERR format, ##args) | 
|  | #else | 
|  | #define snd_azf3328_dbgtimer(format, args...) | 
|  | #endif | 
|  |  | 
|  | static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */ | 
|  | module_param_array(index, int, NULL, 0444); | 
|  | MODULE_PARM_DESC(index, "Index value for AZF3328 soundcard."); | 
|  |  | 
|  | static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */ | 
|  | module_param_array(id, charp, NULL, 0444); | 
|  | MODULE_PARM_DESC(id, "ID string for AZF3328 soundcard."); | 
|  |  | 
|  | static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;	/* Enable this card */ | 
|  | module_param_array(enable, bool, NULL, 0444); | 
|  | MODULE_PARM_DESC(enable, "Enable AZF3328 soundcard."); | 
|  |  | 
|  | #ifdef SUPPORT_JOYSTICK | 
|  | static int joystick[SNDRV_CARDS]; | 
|  | module_param_array(joystick, bool, NULL, 0444); | 
|  | MODULE_PARM_DESC(joystick, "Enable joystick for AZF3328 soundcard."); | 
|  | #endif | 
|  |  | 
|  | static int seqtimer_scaling = 128; | 
|  | module_param(seqtimer_scaling, int, 0444); | 
|  | MODULE_PARM_DESC(seqtimer_scaling, "Set 1024000Hz sequencer timer scale factor (lockup danger!). Default 128."); | 
|  |  | 
|  | struct snd_azf3328 { | 
|  | /* often-used fields towards beginning, then grouped */ | 
|  | unsigned long codec_port; | 
|  | unsigned long io2_port; | 
|  | unsigned long mpu_port; | 
|  | unsigned long synth_port; | 
|  | unsigned long mixer_port; | 
|  |  | 
|  | spinlock_t reg_lock; | 
|  |  | 
|  | struct snd_timer *timer; | 
|  |  | 
|  | struct snd_pcm *pcm; | 
|  | struct snd_pcm_substream *playback_substream; | 
|  | struct snd_pcm_substream *capture_substream; | 
|  | unsigned int is_playing; | 
|  | unsigned int is_recording; | 
|  |  | 
|  | struct snd_card *card; | 
|  | struct snd_rawmidi *rmidi; | 
|  |  | 
|  | #ifdef SUPPORT_JOYSTICK | 
|  | struct gameport *gameport; | 
|  | #endif | 
|  |  | 
|  | struct pci_dev *pci; | 
|  | int irq; | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | /* register value containers for power management | 
|  | * Note: not always full I/O range preserved (just like Win driver!) */ | 
|  | u16 saved_regs_codec [AZF_IO_SIZE_CODEC_PM / 2]; | 
|  | u16 saved_regs_io2   [AZF_IO_SIZE_IO2_PM / 2]; | 
|  | u16 saved_regs_mpu   [AZF_IO_SIZE_MPU_PM / 2]; | 
|  | u16 saved_regs_synth[AZF_IO_SIZE_SYNTH_PM / 2]; | 
|  | u16 saved_regs_mixer[AZF_IO_SIZE_MIXER_PM / 2]; | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static const struct pci_device_id snd_azf3328_ids[] = { | 
|  | { 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* PCI168/3328 */ | 
|  | { 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* 3328 */ | 
|  | { 0, } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, snd_azf3328_ids); | 
|  |  | 
|  | static inline void | 
|  | snd_azf3328_codec_outb(const struct snd_azf3328 *chip, int reg, u8 value) | 
|  | { | 
|  | outb(value, chip->codec_port + reg); | 
|  | } | 
|  |  | 
|  | static inline u8 | 
|  | snd_azf3328_codec_inb(const struct snd_azf3328 *chip, int reg) | 
|  | { | 
|  | return inb(chip->codec_port + reg); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | snd_azf3328_codec_outw(const struct snd_azf3328 *chip, int reg, u16 value) | 
|  | { | 
|  | outw(value, chip->codec_port + reg); | 
|  | } | 
|  |  | 
|  | static inline u16 | 
|  | snd_azf3328_codec_inw(const struct snd_azf3328 *chip, int reg) | 
|  | { | 
|  | return inw(chip->codec_port + reg); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | snd_azf3328_codec_outl(const struct snd_azf3328 *chip, int reg, u32 value) | 
|  | { | 
|  | outl(value, chip->codec_port + reg); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | snd_azf3328_io2_outb(const struct snd_azf3328 *chip, int reg, u8 value) | 
|  | { | 
|  | outb(value, chip->io2_port + reg); | 
|  | } | 
|  |  | 
|  | static inline u8 | 
|  | snd_azf3328_io2_inb(const struct snd_azf3328 *chip, int reg) | 
|  | { | 
|  | return inb(chip->io2_port + reg); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | snd_azf3328_mixer_outw(const struct snd_azf3328 *chip, int reg, u16 value) | 
|  | { | 
|  | outw(value, chip->mixer_port + reg); | 
|  | } | 
|  |  | 
|  | static inline u16 | 
|  | snd_azf3328_mixer_inw(const struct snd_azf3328 *chip, int reg) | 
|  | { | 
|  | return inw(chip->mixer_port + reg); | 
|  | } | 
|  |  | 
|  | static void | 
|  | snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip, int reg, int do_mute) | 
|  | { | 
|  | unsigned long portbase = chip->mixer_port + reg + 1; | 
|  | unsigned char oldval; | 
|  |  | 
|  | /* the mute bit is on the *second* (i.e. right) register of a | 
|  | * left/right channel setting */ | 
|  | oldval = inb(portbase); | 
|  | if (do_mute) | 
|  | oldval |= 0x80; | 
|  | else | 
|  | oldval &= ~0x80; | 
|  | outb(oldval, portbase); | 
|  | } | 
|  |  | 
|  | static void | 
|  | snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, int reg, unsigned char dst_vol_left, unsigned char dst_vol_right, int chan_sel, int delay) | 
|  | { | 
|  | unsigned long portbase = chip->mixer_port + reg; | 
|  | unsigned char curr_vol_left = 0, curr_vol_right = 0; | 
|  | int left_done = 0, right_done = 0; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | if (chan_sel & SET_CHAN_LEFT) | 
|  | curr_vol_left  = inb(portbase + 1); | 
|  | else | 
|  | left_done = 1; | 
|  | if (chan_sel & SET_CHAN_RIGHT) | 
|  | curr_vol_right = inb(portbase + 0); | 
|  | else | 
|  | right_done = 1; | 
|  |  | 
|  | /* take care of muting flag (0x80) contained in left channel */ | 
|  | if (curr_vol_left & 0x80) | 
|  | dst_vol_left |= 0x80; | 
|  | else | 
|  | dst_vol_left &= ~0x80; | 
|  |  | 
|  | do { | 
|  | if (!left_done) { | 
|  | if (curr_vol_left > dst_vol_left) | 
|  | curr_vol_left--; | 
|  | else | 
|  | if (curr_vol_left < dst_vol_left) | 
|  | curr_vol_left++; | 
|  | else | 
|  | left_done = 1; | 
|  | outb(curr_vol_left, portbase + 1); | 
|  | } | 
|  | if (!right_done) { | 
|  | if (curr_vol_right > dst_vol_right) | 
|  | curr_vol_right--; | 
|  | else | 
|  | if (curr_vol_right < dst_vol_right) | 
|  | curr_vol_right++; | 
|  | else | 
|  | right_done = 1; | 
|  | /* during volume change, the right channel is crackling | 
|  | * somewhat more than the left channel, unfortunately. | 
|  | * This seems to be a hardware issue. */ | 
|  | outb(curr_vol_right, portbase + 0); | 
|  | } | 
|  | if (delay) | 
|  | mdelay(delay); | 
|  | } while ((!left_done) || (!right_done)); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * general mixer element | 
|  | */ | 
|  | struct azf3328_mixer_reg { | 
|  | unsigned int reg; | 
|  | unsigned int lchan_shift, rchan_shift; | 
|  | unsigned int mask; | 
|  | unsigned int invert: 1; | 
|  | unsigned int stereo: 1; | 
|  | unsigned int enum_c: 4; | 
|  | }; | 
|  |  | 
|  | #define COMPOSE_MIXER_REG(reg,lchan_shift,rchan_shift,mask,invert,stereo,enum_c) \ | 
|  | ((reg) | (lchan_shift << 8) | (rchan_shift << 12) | \ | 
|  | (mask << 16) | \ | 
|  | (invert << 24) | \ | 
|  | (stereo << 25) | \ | 
|  | (enum_c << 26)) | 
|  |  | 
|  | static void snd_azf3328_mixer_reg_decode(struct azf3328_mixer_reg *r, unsigned long val) | 
|  | { | 
|  | r->reg = val & 0xff; | 
|  | r->lchan_shift = (val >> 8) & 0x0f; | 
|  | r->rchan_shift = (val >> 12) & 0x0f; | 
|  | r->mask = (val >> 16) & 0xff; | 
|  | r->invert = (val >> 24) & 1; | 
|  | r->stereo = (val >> 25) & 1; | 
|  | r->enum_c = (val >> 26) & 0x0f; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mixer switches/volumes | 
|  | */ | 
|  |  | 
|  | #define AZF3328_MIXER_SWITCH(xname, reg, shift, invert) \ | 
|  | { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
|  | .info = snd_azf3328_info_mixer, \ | 
|  | .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ | 
|  | .private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0x1, invert, 0, 0), \ | 
|  | } | 
|  |  | 
|  | #define AZF3328_MIXER_VOL_STEREO(xname, reg, mask, invert) \ | 
|  | { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
|  | .info = snd_azf3328_info_mixer, \ | 
|  | .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ | 
|  | .private_value = COMPOSE_MIXER_REG(reg, 8, 0, mask, invert, 1, 0), \ | 
|  | } | 
|  |  | 
|  | #define AZF3328_MIXER_VOL_MONO(xname, reg, mask, is_right_chan) \ | 
|  | { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
|  | .info = snd_azf3328_info_mixer, \ | 
|  | .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ | 
|  | .private_value = COMPOSE_MIXER_REG(reg, is_right_chan ? 0 : 8, 0, mask, 1, 0, 0), \ | 
|  | } | 
|  |  | 
|  | #define AZF3328_MIXER_VOL_SPECIAL(xname, reg, mask, shift, invert) \ | 
|  | { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
|  | .info = snd_azf3328_info_mixer, \ | 
|  | .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ | 
|  | .private_value = COMPOSE_MIXER_REG(reg, shift, 0, mask, invert, 0, 0), \ | 
|  | } | 
|  |  | 
|  | #define AZF3328_MIXER_ENUM(xname, reg, enum_c, shift) \ | 
|  | { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
|  | .info = snd_azf3328_info_mixer_enum, \ | 
|  | .get = snd_azf3328_get_mixer_enum, .put = snd_azf3328_put_mixer_enum, \ | 
|  | .private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0, 0, 0, enum_c), \ | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_info_mixer(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | struct azf3328_mixer_reg reg; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); | 
|  | uinfo->type = reg.mask == 1 ? | 
|  | SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; | 
|  | uinfo->count = reg.stereo + 1; | 
|  | uinfo->value.integer.min = 0; | 
|  | uinfo->value.integer.max = reg.mask; | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_get_mixer(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); | 
|  | struct azf3328_mixer_reg reg; | 
|  | unsigned int oreg, val; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); | 
|  |  | 
|  | oreg = snd_azf3328_mixer_inw(chip, reg.reg); | 
|  | val = (oreg >> reg.lchan_shift) & reg.mask; | 
|  | if (reg.invert) | 
|  | val = reg.mask - val; | 
|  | ucontrol->value.integer.value[0] = val; | 
|  | if (reg.stereo) { | 
|  | val = (oreg >> reg.rchan_shift) & reg.mask; | 
|  | if (reg.invert) | 
|  | val = reg.mask - val; | 
|  | ucontrol->value.integer.value[1] = val; | 
|  | } | 
|  | snd_azf3328_dbgmixer("get: %02x is %04x -> vol %02lx|%02lx " | 
|  | "(shift %02d|%02d, mask %02x, inv. %d, stereo %d)\n", | 
|  | reg.reg, oreg, | 
|  | ucontrol->value.integer.value[0], ucontrol->value.integer.value[1], | 
|  | reg.lchan_shift, reg.rchan_shift, reg.mask, reg.invert, reg.stereo); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_put_mixer(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); | 
|  | struct azf3328_mixer_reg reg; | 
|  | unsigned int oreg, nreg, val; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); | 
|  | oreg = snd_azf3328_mixer_inw(chip, reg.reg); | 
|  | val = ucontrol->value.integer.value[0] & reg.mask; | 
|  | if (reg.invert) | 
|  | val = reg.mask - val; | 
|  | nreg = oreg & ~(reg.mask << reg.lchan_shift); | 
|  | nreg |= (val << reg.lchan_shift); | 
|  | if (reg.stereo) { | 
|  | val = ucontrol->value.integer.value[1] & reg.mask; | 
|  | if (reg.invert) | 
|  | val = reg.mask - val; | 
|  | nreg &= ~(reg.mask << reg.rchan_shift); | 
|  | nreg |= (val << reg.rchan_shift); | 
|  | } | 
|  | if (reg.mask >= 0x07) /* it's a volume control, so better take care */ | 
|  | snd_azf3328_mixer_write_volume_gradually( | 
|  | chip, reg.reg, nreg >> 8, nreg & 0xff, | 
|  | /* just set both channels, doesn't matter */ | 
|  | SET_CHAN_LEFT|SET_CHAN_RIGHT, | 
|  | 0); | 
|  | else | 
|  | snd_azf3328_mixer_outw(chip, reg.reg, nreg); | 
|  |  | 
|  | snd_azf3328_dbgmixer("put: %02x to %02lx|%02lx, " | 
|  | "oreg %04x; shift %02d|%02d -> nreg %04x; after: %04x\n", | 
|  | reg.reg, ucontrol->value.integer.value[0], ucontrol->value.integer.value[1], | 
|  | oreg, reg.lchan_shift, reg.rchan_shift, | 
|  | nreg, snd_azf3328_mixer_inw(chip, reg.reg)); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return (nreg != oreg); | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | static const char * const texts1[] = { | 
|  | "Mic1", "Mic2" | 
|  | }; | 
|  | static const char * const texts2[] = { | 
|  | "Mix", "Mic" | 
|  | }; | 
|  | static const char * const texts3[] = { | 
|  | "Mic", "CD", "Video", "Aux", | 
|  | "Line", "Mix", "Mix Mono", "Phone" | 
|  | }; | 
|  | static const char * const texts4[] = { | 
|  | "pre 3D", "post 3D" | 
|  | }; | 
|  | struct azf3328_mixer_reg reg; | 
|  |  | 
|  | snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | 
|  | uinfo->count = (reg.reg == IDX_MIXER_REC_SELECT) ? 2 : 1; | 
|  | uinfo->value.enumerated.items = reg.enum_c; | 
|  | if (uinfo->value.enumerated.item > reg.enum_c - 1U) | 
|  | uinfo->value.enumerated.item = reg.enum_c - 1U; | 
|  | if (reg.reg == IDX_MIXER_ADVCTL2) { | 
|  | switch(reg.lchan_shift) { | 
|  | case 8: /* modem out sel */ | 
|  | strcpy(uinfo->value.enumerated.name, texts1[uinfo->value.enumerated.item]); | 
|  | break; | 
|  | case 9: /* mono sel source */ | 
|  | strcpy(uinfo->value.enumerated.name, texts2[uinfo->value.enumerated.item]); | 
|  | break; | 
|  | case 15: /* PCM Out Path */ | 
|  | strcpy(uinfo->value.enumerated.name, texts4[uinfo->value.enumerated.item]); | 
|  | break; | 
|  | } | 
|  | } else | 
|  | strcpy(uinfo->value.enumerated.name, texts3[uinfo->value.enumerated.item] | 
|  | ); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_get_mixer_enum(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); | 
|  | struct azf3328_mixer_reg reg; | 
|  | unsigned short val; | 
|  |  | 
|  | snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); | 
|  | val = snd_azf3328_mixer_inw(chip, reg.reg); | 
|  | if (reg.reg == IDX_MIXER_REC_SELECT) { | 
|  | ucontrol->value.enumerated.item[0] = (val >> 8) & (reg.enum_c - 1); | 
|  | ucontrol->value.enumerated.item[1] = (val >> 0) & (reg.enum_c - 1); | 
|  | } else | 
|  | ucontrol->value.enumerated.item[0] = (val >> reg.lchan_shift) & (reg.enum_c - 1); | 
|  |  | 
|  | snd_azf3328_dbgmixer("get_enum: %02x is %04x -> %d|%d (shift %02d, enum_c %d)\n", | 
|  | reg.reg, val, ucontrol->value.enumerated.item[0], ucontrol->value.enumerated.item[1], | 
|  | reg.lchan_shift, reg.enum_c); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_put_mixer_enum(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); | 
|  | struct azf3328_mixer_reg reg; | 
|  | unsigned int oreg, nreg, val; | 
|  |  | 
|  | snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); | 
|  | oreg = snd_azf3328_mixer_inw(chip, reg.reg); | 
|  | val = oreg; | 
|  | if (reg.reg == IDX_MIXER_REC_SELECT) { | 
|  | if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U || | 
|  | ucontrol->value.enumerated.item[1] > reg.enum_c - 1U) | 
|  | return -EINVAL; | 
|  | val = (ucontrol->value.enumerated.item[0] << 8) | | 
|  | (ucontrol->value.enumerated.item[1] << 0); | 
|  | } else { | 
|  | if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U) | 
|  | return -EINVAL; | 
|  | val &= ~((reg.enum_c - 1) << reg.lchan_shift); | 
|  | val |= (ucontrol->value.enumerated.item[0] << reg.lchan_shift); | 
|  | } | 
|  | snd_azf3328_mixer_outw(chip, reg.reg, val); | 
|  | nreg = val; | 
|  |  | 
|  | snd_azf3328_dbgmixer("put_enum: %02x to %04x, oreg %04x\n", reg.reg, val, oreg); | 
|  | return (nreg != oreg); | 
|  | } | 
|  |  | 
|  | static const struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata = { | 
|  | AZF3328_MIXER_SWITCH("Master Playback Switch", IDX_MIXER_PLAY_MASTER, 15, 1), | 
|  | AZF3328_MIXER_VOL_STEREO("Master Playback Volume", IDX_MIXER_PLAY_MASTER, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("Wave Playback Switch", IDX_MIXER_WAVEOUT, 15, 1), | 
|  | AZF3328_MIXER_VOL_STEREO("Wave Playback Volume", IDX_MIXER_WAVEOUT, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("Wave 3D Bypass Playback Switch", IDX_MIXER_ADVCTL2, 7, 1), | 
|  | AZF3328_MIXER_SWITCH("FM Playback Switch", IDX_MIXER_FMSYNTH, 15, 1), | 
|  | AZF3328_MIXER_VOL_STEREO("FM Playback Volume", IDX_MIXER_FMSYNTH, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("CD Playback Switch", IDX_MIXER_CDAUDIO, 15, 1), | 
|  | AZF3328_MIXER_VOL_STEREO("CD Playback Volume", IDX_MIXER_CDAUDIO, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("Capture Switch", IDX_MIXER_REC_VOLUME, 15, 1), | 
|  | AZF3328_MIXER_VOL_STEREO("Capture Volume", IDX_MIXER_REC_VOLUME, 0x0f, 0), | 
|  | AZF3328_MIXER_ENUM("Capture Source", IDX_MIXER_REC_SELECT, 8, 0), | 
|  | AZF3328_MIXER_SWITCH("Mic Playback Switch", IDX_MIXER_MIC, 15, 1), | 
|  | AZF3328_MIXER_VOL_MONO("Mic Playback Volume", IDX_MIXER_MIC, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("Mic Boost (+20dB)", IDX_MIXER_MIC, 6, 0), | 
|  | AZF3328_MIXER_SWITCH("Line Playback Switch", IDX_MIXER_LINEIN, 15, 1), | 
|  | AZF3328_MIXER_VOL_STEREO("Line Playback Volume", IDX_MIXER_LINEIN, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("PC Speaker Playback Switch", IDX_MIXER_PCBEEP, 15, 1), | 
|  | AZF3328_MIXER_VOL_SPECIAL("PC Speaker Playback Volume", IDX_MIXER_PCBEEP, 0x0f, 1, 1), | 
|  | AZF3328_MIXER_SWITCH("Video Playback Switch", IDX_MIXER_VIDEO, 15, 1), | 
|  | AZF3328_MIXER_VOL_STEREO("Video Playback Volume", IDX_MIXER_VIDEO, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("Aux Playback Switch", IDX_MIXER_AUX, 15, 1), | 
|  | AZF3328_MIXER_VOL_STEREO("Aux Playback Volume", IDX_MIXER_AUX, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("Modem Playback Switch", IDX_MIXER_MODEMOUT, 15, 1), | 
|  | AZF3328_MIXER_VOL_MONO("Modem Playback Volume", IDX_MIXER_MODEMOUT, 0x1f, 1), | 
|  | AZF3328_MIXER_SWITCH("Modem Capture Switch", IDX_MIXER_MODEMIN, 15, 1), | 
|  | AZF3328_MIXER_VOL_MONO("Modem Capture Volume", IDX_MIXER_MODEMIN, 0x1f, 1), | 
|  | AZF3328_MIXER_ENUM("Mic Select", IDX_MIXER_ADVCTL2, 2, 8), | 
|  | AZF3328_MIXER_ENUM("Mono Output Select", IDX_MIXER_ADVCTL2, 2, 9), | 
|  | AZF3328_MIXER_ENUM("PCM", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */ | 
|  | AZF3328_MIXER_VOL_SPECIAL("Tone Control - Treble", IDX_MIXER_BASSTREBLE, 0x07, 1, 0), | 
|  | AZF3328_MIXER_VOL_SPECIAL("Tone Control - Bass", IDX_MIXER_BASSTREBLE, 0x07, 9, 0), | 
|  | AZF3328_MIXER_SWITCH("3D Control - Switch", IDX_MIXER_ADVCTL2, 13, 0), | 
|  | AZF3328_MIXER_VOL_SPECIAL("3D Control - Width", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */ | 
|  | AZF3328_MIXER_VOL_SPECIAL("3D Control - Depth", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */ | 
|  | #if MIXER_TESTING | 
|  | AZF3328_MIXER_SWITCH("0", IDX_MIXER_ADVCTL2, 0, 0), | 
|  | AZF3328_MIXER_SWITCH("1", IDX_MIXER_ADVCTL2, 1, 0), | 
|  | AZF3328_MIXER_SWITCH("2", IDX_MIXER_ADVCTL2, 2, 0), | 
|  | AZF3328_MIXER_SWITCH("3", IDX_MIXER_ADVCTL2, 3, 0), | 
|  | AZF3328_MIXER_SWITCH("4", IDX_MIXER_ADVCTL2, 4, 0), | 
|  | AZF3328_MIXER_SWITCH("5", IDX_MIXER_ADVCTL2, 5, 0), | 
|  | AZF3328_MIXER_SWITCH("6", IDX_MIXER_ADVCTL2, 6, 0), | 
|  | AZF3328_MIXER_SWITCH("7", IDX_MIXER_ADVCTL2, 7, 0), | 
|  | AZF3328_MIXER_SWITCH("8", IDX_MIXER_ADVCTL2, 8, 0), | 
|  | AZF3328_MIXER_SWITCH("9", IDX_MIXER_ADVCTL2, 9, 0), | 
|  | AZF3328_MIXER_SWITCH("10", IDX_MIXER_ADVCTL2, 10, 0), | 
|  | AZF3328_MIXER_SWITCH("11", IDX_MIXER_ADVCTL2, 11, 0), | 
|  | AZF3328_MIXER_SWITCH("12", IDX_MIXER_ADVCTL2, 12, 0), | 
|  | AZF3328_MIXER_SWITCH("13", IDX_MIXER_ADVCTL2, 13, 0), | 
|  | AZF3328_MIXER_SWITCH("14", IDX_MIXER_ADVCTL2, 14, 0), | 
|  | AZF3328_MIXER_SWITCH("15", IDX_MIXER_ADVCTL2, 15, 0), | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static const u16 __devinitdata snd_azf3328_init_values[][2] = { | 
|  | { IDX_MIXER_PLAY_MASTER,	MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_MODEMOUT,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_BASSTREBLE,		0x0000 }, | 
|  | { IDX_MIXER_PCBEEP,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_MODEMIN,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_MIC,		MIXER_MUTE_MASK|0x001f }, | 
|  | { IDX_MIXER_LINEIN,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_CDAUDIO,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_VIDEO,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_AUX,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_WAVEOUT,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_FMSYNTH,		MIXER_MUTE_MASK|0x1f1f }, | 
|  | { IDX_MIXER_REC_VOLUME,		MIXER_MUTE_MASK|0x0707 }, | 
|  | }; | 
|  |  | 
|  | static int __devinit | 
|  | snd_azf3328_mixer_new(struct snd_azf3328 *chip) | 
|  | { | 
|  | struct snd_card *card; | 
|  | const struct snd_kcontrol_new *sw; | 
|  | unsigned int idx; | 
|  | int err; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | snd_assert(chip != NULL && chip->card != NULL, return -EINVAL); | 
|  |  | 
|  | card = chip->card; | 
|  |  | 
|  | /* mixer reset */ | 
|  | snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); | 
|  |  | 
|  | /* mute and zero volume channels */ | 
|  | for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_init_values); idx++) { | 
|  | snd_azf3328_mixer_outw(chip, | 
|  | snd_azf3328_init_values[idx][0], | 
|  | snd_azf3328_init_values[idx][1]); | 
|  | } | 
|  |  | 
|  | /* add mixer controls */ | 
|  | sw = snd_azf3328_mixer_controls; | 
|  | for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_mixer_controls); idx++, sw++) { | 
|  | if ((err = snd_ctl_add(chip->card, snd_ctl_new1(sw, chip))) < 0) | 
|  | return err; | 
|  | } | 
|  | snd_component_add(card, "AZF3328 mixer"); | 
|  | strcpy(card->mixername, "AZF3328 mixer"); | 
|  |  | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *hw_params) | 
|  | { | 
|  | int res; | 
|  | snd_azf3328_dbgcallenter(); | 
|  | res = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_hw_free(struct snd_pcm_substream *substream) | 
|  | { | 
|  | snd_azf3328_dbgcallenter(); | 
|  | snd_pcm_lib_free_pages(substream); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | snd_azf3328_setfmt(struct snd_azf3328 *chip, | 
|  | unsigned int reg, | 
|  | unsigned int bitrate, | 
|  | unsigned int format_width, | 
|  | unsigned int channels | 
|  | ) | 
|  | { | 
|  | u16 val = 0xff00; | 
|  | unsigned long flags; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | switch (bitrate) { | 
|  | case  4000: val |= SOUNDFORMAT_FREQ_SUSPECTED_4000; break; | 
|  | case  4800: val |= SOUNDFORMAT_FREQ_SUSPECTED_4800; break; | 
|  | case  5512: val |= SOUNDFORMAT_FREQ_5510; break; /* the AZF3328 names it "5510" for some strange reason */ | 
|  | case  6620: val |= SOUNDFORMAT_FREQ_6620; break; | 
|  | case  8000: val |= SOUNDFORMAT_FREQ_8000; break; | 
|  | case  9600: val |= SOUNDFORMAT_FREQ_9600; break; | 
|  | case 11025: val |= SOUNDFORMAT_FREQ_11025; break; | 
|  | case 13240: val |= SOUNDFORMAT_FREQ_SUSPECTED_13240; break; | 
|  | case 16000: val |= SOUNDFORMAT_FREQ_16000; break; | 
|  | case 22050: val |= SOUNDFORMAT_FREQ_22050; break; | 
|  | case 32000: val |= SOUNDFORMAT_FREQ_32000; break; | 
|  | case 44100: val |= SOUNDFORMAT_FREQ_44100; break; | 
|  | case 48000: val |= SOUNDFORMAT_FREQ_48000; break; | 
|  | case 66200: val |= SOUNDFORMAT_FREQ_SUSPECTED_66200; break; | 
|  | default: | 
|  | snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate); | 
|  | val |= SOUNDFORMAT_FREQ_44100; | 
|  | break; | 
|  | } | 
|  | /* val = 0xff07; 3m27.993s (65301Hz; -> 64000Hz???) hmm, 66120, 65967, 66123 */ | 
|  | /* val = 0xff09; 17m15.098s (13123,478Hz; -> 12000Hz???) hmm, 13237.2Hz? */ | 
|  | /* val = 0xff0a; 47m30.599s (4764,891Hz; -> 4800Hz???) yup, 4803Hz */ | 
|  | /* val = 0xff0c; 57m0.510s (4010,263Hz; -> 4000Hz???) yup, 4003Hz */ | 
|  | /* val = 0xff05; 5m11.556s (... -> 44100Hz) */ | 
|  | /* val = 0xff03; 10m21.529s (21872,463Hz; -> 22050Hz???) */ | 
|  | /* val = 0xff0f; 20m41.883s (10937,993Hz; -> 11025Hz???) */ | 
|  | /* val = 0xff0d; 41m23.135s (5523,600Hz; -> 5512Hz???) */ | 
|  | /* val = 0xff0e; 28m30.777s (8017Hz; -> 8000Hz???) */ | 
|  |  | 
|  | if (channels == 2) | 
|  | val |= SOUNDFORMAT_FLAG_2CHANNELS; | 
|  |  | 
|  | if (format_width == 16) | 
|  | val |= SOUNDFORMAT_FLAG_16BIT; | 
|  |  | 
|  | spin_lock_irqsave(&chip->reg_lock, flags); | 
|  |  | 
|  | /* set bitrate/format */ | 
|  | snd_azf3328_codec_outw(chip, reg, val); | 
|  |  | 
|  | /* changing the bitrate/format settings switches off the | 
|  | * audio output with an annoying click in case of 8/16bit format change | 
|  | * (maybe shutting down DAC/ADC?), thus immediately | 
|  | * do some tweaking to reenable it and get rid of the clicking | 
|  | * (FIXME: yes, it works, but what exactly am I doing here?? :) | 
|  | * FIXME: does this have some side effects for full-duplex | 
|  | * or other dramatic side effects? */ | 
|  | if (reg == IDX_IO_PLAY_SOUNDFORMAT) /* only do it for playback */ | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, | 
|  | snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | | 
|  | DMA_PLAY_SOMETHING1 | | 
|  | DMA_PLAY_SOMETHING2 | | 
|  | SOMETHING_ALMOST_ALWAYS_SET | | 
|  | DMA_EPILOGUE_SOMETHING | | 
|  | DMA_SOMETHING_ELSE | 
|  | ); | 
|  |  | 
|  | spin_unlock_irqrestore(&chip->reg_lock, flags); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | } | 
|  |  | 
|  | static void | 
|  | snd_azf3328_setdmaa(struct snd_azf3328 *chip, | 
|  | long unsigned int addr, | 
|  | unsigned int count, | 
|  | unsigned int size, | 
|  | int do_recording) | 
|  | { | 
|  | unsigned long flags, portbase; | 
|  | unsigned int is_running; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | if (do_recording) { | 
|  | /* access capture registers, i.e. skip playback reg section */ | 
|  | portbase = chip->codec_port + 0x20; | 
|  | is_running = chip->is_recording; | 
|  | } else { | 
|  | /* access the playback register section */ | 
|  | portbase = chip->codec_port + 0x00; | 
|  | is_running = chip->is_playing; | 
|  | } | 
|  |  | 
|  | /* AZF3328 uses a two buffer pointer DMA playback approach */ | 
|  | if (!is_running) { | 
|  | unsigned long addr_area2; | 
|  | unsigned long count_areas, count_tmp; /* width 32bit -- overflow!! */ | 
|  | count_areas = size/2; | 
|  | addr_area2 = addr+count_areas; | 
|  | count_areas--; /* max. index */ | 
|  | snd_azf3328_dbgplay("set DMA: buf1 %08lx[%lu], buf2 %08lx[%lu]\n", addr, count_areas, addr_area2, count_areas); | 
|  |  | 
|  | /* build combined I/O buffer length word */ | 
|  | count_tmp = count_areas; | 
|  | count_areas |= (count_tmp << 16); | 
|  | spin_lock_irqsave(&chip->reg_lock, flags); | 
|  | outl(addr, portbase + IDX_IO_PLAY_DMA_START_1); | 
|  | outl(addr_area2, portbase + IDX_IO_PLAY_DMA_START_2); | 
|  | outl(count_areas, portbase + IDX_IO_PLAY_DMA_LEN_1); | 
|  | spin_unlock_irqrestore(&chip->reg_lock, flags); | 
|  | } | 
|  | snd_azf3328_dbgcallleave(); | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_playback_prepare(struct snd_pcm_substream *substream) | 
|  | { | 
|  | #if 0 | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | unsigned int size = snd_pcm_lib_buffer_bytes(substream); | 
|  | unsigned int count = snd_pcm_lib_period_bytes(substream); | 
|  | #endif | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | #if 0 | 
|  | snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, | 
|  | runtime->rate, | 
|  | snd_pcm_format_width(runtime->format), | 
|  | runtime->channels); | 
|  | snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, 0); | 
|  | #endif | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_capture_prepare(struct snd_pcm_substream *substream) | 
|  | { | 
|  | #if 0 | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | unsigned int size = snd_pcm_lib_buffer_bytes(substream); | 
|  | unsigned int count = snd_pcm_lib_period_bytes(substream); | 
|  | #endif | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | #if 0 | 
|  | snd_azf3328_setfmt(chip, IDX_IO_REC_SOUNDFORMAT, | 
|  | runtime->rate, | 
|  | snd_pcm_format_width(runtime->format), | 
|  | runtime->channels); | 
|  | snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, 1); | 
|  | #endif | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | int result = 0; | 
|  | unsigned int status1; | 
|  |  | 
|  | snd_azf3328_dbgcalls("snd_azf3328_playback_trigger cmd %d\n", cmd); | 
|  |  | 
|  | switch (cmd) { | 
|  | case SNDRV_PCM_TRIGGER_START: | 
|  | snd_azf3328_dbgplay("START PLAYBACK\n"); | 
|  |  | 
|  | /* mute WaveOut */ | 
|  | snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); | 
|  |  | 
|  | snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, | 
|  | runtime->rate, | 
|  | snd_pcm_format_width(runtime->format), | 
|  | runtime->channels); | 
|  |  | 
|  | spin_lock(&chip->reg_lock); | 
|  | /* stop playback */ | 
|  | status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS); | 
|  | status1 &= ~DMA_RESUME; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); | 
|  |  | 
|  | /* FIXME: clear interrupts or what??? */ | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_IRQTYPE, 0xffff); | 
|  | spin_unlock(&chip->reg_lock); | 
|  |  | 
|  | snd_azf3328_setdmaa(chip, runtime->dma_addr, | 
|  | snd_pcm_lib_period_bytes(substream), | 
|  | snd_pcm_lib_buffer_bytes(substream), | 
|  | 0); | 
|  |  | 
|  | spin_lock(&chip->reg_lock); | 
|  | #ifdef WIN9X | 
|  | /* FIXME: enable playback/recording??? */ | 
|  | status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); | 
|  |  | 
|  | /* start playback again */ | 
|  | /* FIXME: what is this value (0x0010)??? */ | 
|  | status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); | 
|  | #else /* NT4 */ | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, | 
|  | 0x0000); | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, | 
|  | DMA_PLAY_SOMETHING1); | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, | 
|  | DMA_PLAY_SOMETHING1 | | 
|  | DMA_PLAY_SOMETHING2); | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, | 
|  | DMA_RESUME | | 
|  | SOMETHING_ALMOST_ALWAYS_SET | | 
|  | DMA_EPILOGUE_SOMETHING | | 
|  | DMA_SOMETHING_ELSE); | 
|  | #endif | 
|  | spin_unlock(&chip->reg_lock); | 
|  |  | 
|  | /* now unmute WaveOut */ | 
|  | snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0); | 
|  |  | 
|  | chip->is_playing = 1; | 
|  | snd_azf3328_dbgplay("STARTED PLAYBACK\n"); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_RESUME: | 
|  | snd_azf3328_dbgplay("RESUME PLAYBACK\n"); | 
|  | /* resume playback if we were active */ | 
|  | if (chip->is_playing) | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, | 
|  | snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | DMA_RESUME); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_STOP: | 
|  | snd_azf3328_dbgplay("STOP PLAYBACK\n"); | 
|  |  | 
|  | /* mute WaveOut */ | 
|  | snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); | 
|  |  | 
|  | spin_lock(&chip->reg_lock); | 
|  | /* stop playback */ | 
|  | status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS); | 
|  |  | 
|  | status1 &= ~DMA_RESUME; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); | 
|  |  | 
|  | /* hmm, is this really required? we're resetting the same bit | 
|  | * immediately thereafter... */ | 
|  | status1 |= DMA_PLAY_SOMETHING1; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); | 
|  |  | 
|  | status1 &= ~DMA_PLAY_SOMETHING1; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); | 
|  | spin_unlock(&chip->reg_lock); | 
|  |  | 
|  | /* now unmute WaveOut */ | 
|  | snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0); | 
|  | chip->is_playing = 0; | 
|  | snd_azf3328_dbgplay("STOPPED PLAYBACK\n"); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_SUSPEND: | 
|  | snd_azf3328_dbgplay("SUSPEND PLAYBACK\n"); | 
|  | /* make sure playback is stopped */ | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, | 
|  | snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) & ~DMA_RESUME); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | 
|  | snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | 
|  | snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); | 
|  | break; | 
|  | default: | 
|  | printk(KERN_ERR "FIXME: unknown trigger mode!\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* this is just analogous to playback; I'm not quite sure whether recording | 
|  | * should actually be triggered like that */ | 
|  | static int | 
|  | snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | int result = 0; | 
|  | unsigned int status1; | 
|  |  | 
|  | snd_azf3328_dbgcalls("snd_azf3328_capture_trigger cmd %d\n", cmd); | 
|  |  | 
|  | switch (cmd) { | 
|  | case SNDRV_PCM_TRIGGER_START: | 
|  |  | 
|  | snd_azf3328_dbgplay("START CAPTURE\n"); | 
|  |  | 
|  | snd_azf3328_setfmt(chip, IDX_IO_REC_SOUNDFORMAT, | 
|  | runtime->rate, | 
|  | snd_pcm_format_width(runtime->format), | 
|  | runtime->channels); | 
|  |  | 
|  | spin_lock(&chip->reg_lock); | 
|  | /* stop recording */ | 
|  | status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS); | 
|  | status1 &= ~DMA_RESUME; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); | 
|  |  | 
|  | /* FIXME: clear interrupts or what??? */ | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_IRQTYPE, 0xffff); | 
|  | spin_unlock(&chip->reg_lock); | 
|  |  | 
|  | snd_azf3328_setdmaa(chip, runtime->dma_addr, | 
|  | snd_pcm_lib_period_bytes(substream), | 
|  | snd_pcm_lib_buffer_bytes(substream), | 
|  | 1); | 
|  |  | 
|  | spin_lock(&chip->reg_lock); | 
|  | #ifdef WIN9X | 
|  | /* FIXME: enable playback/recording??? */ | 
|  | status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); | 
|  |  | 
|  | /* start capture again */ | 
|  | /* FIXME: what is this value (0x0010)??? */ | 
|  | status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); | 
|  | #else | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, | 
|  | 0x0000); | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, | 
|  | DMA_PLAY_SOMETHING1); | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, | 
|  | DMA_PLAY_SOMETHING1 | | 
|  | DMA_PLAY_SOMETHING2); | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, | 
|  | DMA_RESUME | | 
|  | SOMETHING_ALMOST_ALWAYS_SET | | 
|  | DMA_EPILOGUE_SOMETHING | | 
|  | DMA_SOMETHING_ELSE); | 
|  | #endif | 
|  | spin_unlock(&chip->reg_lock); | 
|  |  | 
|  | chip->is_recording = 1; | 
|  | snd_azf3328_dbgplay("STARTED CAPTURE\n"); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_RESUME: | 
|  | snd_azf3328_dbgplay("RESUME CAPTURE\n"); | 
|  | /* resume recording if we were active */ | 
|  | if (chip->is_recording) | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, | 
|  | snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) | DMA_RESUME); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_STOP: | 
|  | snd_azf3328_dbgplay("STOP CAPTURE\n"); | 
|  |  | 
|  | spin_lock(&chip->reg_lock); | 
|  | /* stop recording */ | 
|  | status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS); | 
|  |  | 
|  | status1 &= ~DMA_RESUME; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); | 
|  |  | 
|  | status1 |= DMA_PLAY_SOMETHING1; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); | 
|  |  | 
|  | status1 &= ~DMA_PLAY_SOMETHING1; | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); | 
|  | spin_unlock(&chip->reg_lock); | 
|  |  | 
|  | chip->is_recording = 0; | 
|  | snd_azf3328_dbgplay("STOPPED CAPTURE\n"); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_SUSPEND: | 
|  | snd_azf3328_dbgplay("SUSPEND CAPTURE\n"); | 
|  | /* make sure recording is stopped */ | 
|  | snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, | 
|  | snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) & ~DMA_RESUME); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | 
|  | snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); | 
|  | break; | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | 
|  | snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); | 
|  | break; | 
|  | default: | 
|  | printk(KERN_ERR "FIXME: unknown trigger mode!\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static snd_pcm_uframes_t | 
|  | snd_azf3328_playback_pointer(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  | unsigned long bufptr, result; | 
|  | snd_pcm_uframes_t frmres; | 
|  |  | 
|  | #ifdef QUERY_HARDWARE | 
|  | bufptr = inl(chip->codec_port+IDX_IO_PLAY_DMA_START_1); | 
|  | #else | 
|  | bufptr = substream->runtime->dma_addr; | 
|  | #endif | 
|  | result = inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS); | 
|  |  | 
|  | /* calculate offset */ | 
|  | result -= bufptr; | 
|  | frmres = bytes_to_frames( substream->runtime, result); | 
|  | snd_azf3328_dbgplay("PLAY @ 0x%8lx, frames %8ld\n", result, frmres); | 
|  | return frmres; | 
|  | } | 
|  |  | 
|  | static snd_pcm_uframes_t | 
|  | snd_azf3328_capture_pointer(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  | unsigned long bufptr, result; | 
|  | snd_pcm_uframes_t frmres; | 
|  |  | 
|  | #ifdef QUERY_HARDWARE | 
|  | bufptr = inl(chip->codec_port+IDX_IO_REC_DMA_START_1); | 
|  | #else | 
|  | bufptr = substream->runtime->dma_addr; | 
|  | #endif | 
|  | result = inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS); | 
|  |  | 
|  | /* calculate offset */ | 
|  | result -= bufptr; | 
|  | frmres = bytes_to_frames( substream->runtime, result); | 
|  | snd_azf3328_dbgplay("REC  @ 0x%8lx, frames %8ld\n", result, frmres); | 
|  | return frmres; | 
|  | } | 
|  |  | 
|  | static irqreturn_t | 
|  | snd_azf3328_interrupt(int irq, void *dev_id, struct pt_regs *regs) | 
|  | { | 
|  | struct snd_azf3328 *chip = dev_id; | 
|  | u8 status, which; | 
|  | static unsigned long irq_count; | 
|  |  | 
|  | status = snd_azf3328_codec_inb(chip, IDX_IO_IRQSTATUS); | 
|  |  | 
|  | /* fast path out, to ease interrupt sharing */ | 
|  | if (!(status & (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_MPU401|IRQ_TIMER))) | 
|  | return IRQ_NONE; /* must be interrupt for another device */ | 
|  |  | 
|  | snd_azf3328_dbgplay("Interrupt %ld!\nIDX_IO_PLAY_FLAGS %04x, IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n", | 
|  | irq_count, | 
|  | snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS), | 
|  | snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE), | 
|  | status); | 
|  |  | 
|  | if (status & IRQ_TIMER) { | 
|  | /* snd_azf3328_dbgplay("timer %ld\n", inl(chip->codec_port+IDX_IO_TIMER_VALUE) & TIMER_VALUE_MASK); */ | 
|  | if (chip->timer) | 
|  | snd_timer_interrupt(chip->timer, chip->timer->sticks); | 
|  | /* ACK timer */ | 
|  | spin_lock(&chip->reg_lock); | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07); | 
|  | spin_unlock(&chip->reg_lock); | 
|  | snd_azf3328_dbgplay("azt3328: timer IRQ\n"); | 
|  | } | 
|  | if (status & IRQ_PLAYBACK) { | 
|  | spin_lock(&chip->reg_lock); | 
|  | which = snd_azf3328_codec_inb(chip, IDX_IO_PLAY_IRQTYPE); | 
|  | /* ack all IRQ types immediately */ | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_PLAY_IRQTYPE, which); | 
|  | spin_unlock(&chip->reg_lock); | 
|  |  | 
|  | if (chip->pcm && chip->playback_substream) { | 
|  | snd_pcm_period_elapsed(chip->playback_substream); | 
|  | snd_azf3328_dbgplay("PLAY period done (#%x), @ %x\n", | 
|  | which, | 
|  | inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS)); | 
|  | } else | 
|  | snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); | 
|  | if (which & IRQ_PLAY_SOMETHING) | 
|  | snd_azf3328_dbgplay("azt3328: unknown play IRQ type occurred, please report!\n"); | 
|  | } | 
|  | if (status & IRQ_RECORDING) { | 
|  | spin_lock(&chip->reg_lock); | 
|  | which = snd_azf3328_codec_inb(chip, IDX_IO_REC_IRQTYPE); | 
|  | /* ack all IRQ types immediately */ | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_REC_IRQTYPE, which); | 
|  | spin_unlock(&chip->reg_lock); | 
|  |  | 
|  | if (chip->pcm && chip->capture_substream) { | 
|  | snd_pcm_period_elapsed(chip->capture_substream); | 
|  | snd_azf3328_dbgplay("REC  period done (#%x), @ %x\n", | 
|  | which, | 
|  | inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS)); | 
|  | } else | 
|  | snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); | 
|  | if (which & IRQ_REC_SOMETHING) | 
|  | snd_azf3328_dbgplay("azt3328: unknown rec IRQ type occurred, please report!\n"); | 
|  | } | 
|  | /* MPU401 has less critical IRQ requirements | 
|  | * than timer and playback/recording, right? */ | 
|  | if (status & IRQ_MPU401) { | 
|  | snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data, regs); | 
|  |  | 
|  | /* hmm, do we have to ack the IRQ here somehow? | 
|  | * If so, then I don't know how... */ | 
|  | snd_azf3328_dbgplay("azt3328: MPU401 IRQ\n"); | 
|  | } | 
|  | irq_count++; | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /*****************************************************************/ | 
|  |  | 
|  | static const struct snd_pcm_hardware snd_azf3328_playback = | 
|  | { | 
|  | /* FIXME!! Correct? */ | 
|  | .info =			SNDRV_PCM_INFO_MMAP | | 
|  | SNDRV_PCM_INFO_INTERLEAVED | | 
|  | SNDRV_PCM_INFO_MMAP_VALID, | 
|  | .formats =		SNDRV_PCM_FMTBIT_S8 | | 
|  | SNDRV_PCM_FMTBIT_U8 | | 
|  | SNDRV_PCM_FMTBIT_S16_LE | | 
|  | SNDRV_PCM_FMTBIT_U16_LE, | 
|  | .rates =		SNDRV_PCM_RATE_5512 | | 
|  | SNDRV_PCM_RATE_8000_48000 | | 
|  | SNDRV_PCM_RATE_KNOT, | 
|  | .rate_min =		4000, | 
|  | .rate_max =		66200, | 
|  | .channels_min =		1, | 
|  | .channels_max =		2, | 
|  | .buffer_bytes_max =	65536, | 
|  | .period_bytes_min =	64, | 
|  | .period_bytes_max =	65536, | 
|  | .periods_min =		1, | 
|  | .periods_max =		1024, | 
|  | /* FIXME: maybe that card actually has a FIFO? | 
|  | * Hmm, it seems newer revisions do have one, but we still don't know | 
|  | * its size... */ | 
|  | .fifo_size =		0, | 
|  | }; | 
|  |  | 
|  | static const struct snd_pcm_hardware snd_azf3328_capture = | 
|  | { | 
|  | /* FIXME */ | 
|  | .info =			SNDRV_PCM_INFO_MMAP | | 
|  | SNDRV_PCM_INFO_INTERLEAVED | | 
|  | SNDRV_PCM_INFO_MMAP_VALID, | 
|  | .formats =		SNDRV_PCM_FMTBIT_S8 | | 
|  | SNDRV_PCM_FMTBIT_U8 | | 
|  | SNDRV_PCM_FMTBIT_S16_LE | | 
|  | SNDRV_PCM_FMTBIT_U16_LE, | 
|  | .rates =		SNDRV_PCM_RATE_5512 | | 
|  | SNDRV_PCM_RATE_8000_48000 | | 
|  | SNDRV_PCM_RATE_KNOT, | 
|  | .rate_min =		4000, | 
|  | .rate_max =		66200, | 
|  | .channels_min =		1, | 
|  | .channels_max =		2, | 
|  | .buffer_bytes_max =	65536, | 
|  | .period_bytes_min =	64, | 
|  | .period_bytes_max =	65536, | 
|  | .periods_min =		1, | 
|  | .periods_max =		1024, | 
|  | .fifo_size =		0, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static unsigned int snd_azf3328_fixed_rates[] = { | 
|  | 4000, 4800, 5512, 6620, 8000, 9600, 11025, 13240, 16000, 22050, 32000, | 
|  | 44100, 48000, 66200 }; | 
|  | static struct snd_pcm_hw_constraint_list snd_azf3328_hw_constraints_rates = { | 
|  | .count = ARRAY_SIZE(snd_azf3328_fixed_rates), | 
|  | .list = snd_azf3328_fixed_rates, | 
|  | .mask = 0, | 
|  | }; | 
|  |  | 
|  | /*****************************************************************/ | 
|  |  | 
|  | static int | 
|  | snd_azf3328_playback_open(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | chip->playback_substream = substream; | 
|  | runtime->hw = snd_azf3328_playback; | 
|  | snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, | 
|  | &snd_azf3328_hw_constraints_rates); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_capture_open(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | chip->capture_substream = substream; | 
|  | runtime->hw = snd_azf3328_capture; | 
|  | snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, | 
|  | &snd_azf3328_hw_constraints_rates); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_playback_close(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  |  | 
|  | chip->playback_substream = NULL; | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_capture_close(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | chip->capture_substream = NULL; | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /******************************************************************/ | 
|  |  | 
|  | static struct snd_pcm_ops snd_azf3328_playback_ops = { | 
|  | .open =		snd_azf3328_playback_open, | 
|  | .close =	snd_azf3328_playback_close, | 
|  | .ioctl =	snd_pcm_lib_ioctl, | 
|  | .hw_params =	snd_azf3328_hw_params, | 
|  | .hw_free =	snd_azf3328_hw_free, | 
|  | .prepare =	snd_azf3328_playback_prepare, | 
|  | .trigger =	snd_azf3328_playback_trigger, | 
|  | .pointer =	snd_azf3328_playback_pointer | 
|  | }; | 
|  |  | 
|  | static struct snd_pcm_ops snd_azf3328_capture_ops = { | 
|  | .open =		snd_azf3328_capture_open, | 
|  | .close =	snd_azf3328_capture_close, | 
|  | .ioctl =	snd_pcm_lib_ioctl, | 
|  | .hw_params =	snd_azf3328_hw_params, | 
|  | .hw_free =	snd_azf3328_hw_free, | 
|  | .prepare =	snd_azf3328_capture_prepare, | 
|  | .trigger =	snd_azf3328_capture_trigger, | 
|  | .pointer =	snd_azf3328_capture_pointer | 
|  | }; | 
|  |  | 
|  | static int __devinit | 
|  | snd_azf3328_pcm(struct snd_azf3328 *chip, int device) | 
|  | { | 
|  | struct snd_pcm *pcm; | 
|  | int err; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | if ((err = snd_pcm_new(chip->card, "AZF3328 DSP", device, 1, 1, &pcm)) < 0) | 
|  | return err; | 
|  | snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_azf3328_playback_ops); | 
|  | snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_azf3328_capture_ops); | 
|  |  | 
|  | pcm->private_data = chip; | 
|  | pcm->info_flags = 0; | 
|  | strcpy(pcm->name, chip->card->shortname); | 
|  | chip->pcm = pcm; | 
|  |  | 
|  | snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, | 
|  | snd_dma_pci_data(chip->pci), 64*1024, 64*1024); | 
|  |  | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /******************************************************************/ | 
|  |  | 
|  | #ifdef SUPPORT_JOYSTICK | 
|  | static int __devinit | 
|  | snd_azf3328_config_joystick(struct snd_azf3328 *chip, int dev) | 
|  | { | 
|  | struct gameport *gp; | 
|  | struct resource *r; | 
|  |  | 
|  | if (!joystick[dev]) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!(r = request_region(0x200, 8, "AZF3328 gameport"))) { | 
|  | printk(KERN_WARNING "azt3328: cannot reserve joystick ports\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | chip->gameport = gp = gameport_allocate_port(); | 
|  | if (!gp) { | 
|  | printk(KERN_ERR "azt3328: cannot allocate memory for gameport\n"); | 
|  | release_and_free_resource(r); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | gameport_set_name(gp, "AZF3328 Gameport"); | 
|  | gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci)); | 
|  | gameport_set_dev_parent(gp, &chip->pci->dev); | 
|  | gp->io = 0x200; | 
|  | gameport_set_port_data(gp, r); | 
|  |  | 
|  | snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, | 
|  | snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) | LEGACY_JOY); | 
|  |  | 
|  | gameport_register_port(chip->gameport); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | snd_azf3328_free_joystick(struct snd_azf3328 *chip) | 
|  | { | 
|  | if (chip->gameport) { | 
|  | struct resource *r = gameport_get_port_data(chip->gameport); | 
|  |  | 
|  | gameport_unregister_port(chip->gameport); | 
|  | chip->gameport = NULL; | 
|  | /* disable gameport */ | 
|  | snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, | 
|  | snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) & ~LEGACY_JOY); | 
|  | release_and_free_resource(r); | 
|  | } | 
|  | } | 
|  | #else | 
|  | static inline int | 
|  | snd_azf3328_config_joystick(struct snd_azf3328 *chip, int dev) { return -ENOSYS; } | 
|  | static inline void | 
|  | snd_azf3328_free_joystick(struct snd_azf3328 *chip) { } | 
|  | #endif | 
|  |  | 
|  | /******************************************************************/ | 
|  |  | 
|  | static int | 
|  | snd_azf3328_free(struct snd_azf3328 *chip) | 
|  | { | 
|  | if (chip->irq < 0) | 
|  | goto __end_hw; | 
|  |  | 
|  | /* reset (close) mixer */ | 
|  | snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1); /* first mute master volume */ | 
|  | snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); | 
|  |  | 
|  | /* interrupt setup - mask everything (FIXME!) */ | 
|  | /* well, at least we know how to disable the timer IRQ */ | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x00); | 
|  |  | 
|  | synchronize_irq(chip->irq); | 
|  | __end_hw: | 
|  | snd_azf3328_free_joystick(chip); | 
|  | if (chip->irq >= 0) | 
|  | free_irq(chip->irq, (void *)chip); | 
|  | pci_release_regions(chip->pci); | 
|  | pci_disable_device(chip->pci); | 
|  |  | 
|  | kfree(chip); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_dev_free(struct snd_device *device) | 
|  | { | 
|  | struct snd_azf3328 *chip = device->device_data; | 
|  | return snd_azf3328_free(chip); | 
|  | } | 
|  |  | 
|  | /******************************************************************/ | 
|  |  | 
|  | /*** NOTE: the physical timer resolution actually is 1024000 ticks per second, | 
|  | *** but announcing those attributes to user-space would make programs | 
|  | *** configure the timer to a 1 tick value, resulting in an absolutely fatal | 
|  | *** timer IRQ storm. | 
|  | *** Thus I chose to announce a down-scaled virtual timer to the outside and | 
|  | *** calculate real timer countdown values internally. | 
|  | *** (the scale factor can be set via module parameter "seqtimer_scaling"). | 
|  | ***/ | 
|  |  | 
|  | static int | 
|  | snd_azf3328_timer_start(struct snd_timer *timer) | 
|  | { | 
|  | struct snd_azf3328 *chip; | 
|  | unsigned long flags; | 
|  | unsigned int delay; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | chip = snd_timer_chip(timer); | 
|  | delay = ((timer->sticks * seqtimer_scaling) - 1) & TIMER_VALUE_MASK; | 
|  | if (delay < 49) { | 
|  | /* uhoh, that's not good, since user-space won't know about | 
|  | * this timing tweak | 
|  | * (we need to do it to avoid a lockup, though) */ | 
|  |  | 
|  | snd_azf3328_dbgtimer("delay was too low (%d)!\n", delay); | 
|  | delay = 49; /* minimum time is 49 ticks */ | 
|  | } | 
|  | snd_azf3328_dbgtimer("setting timer countdown value %d, add COUNTDOWN|IRQ\n", delay); | 
|  | delay |= TIMER_ENABLE_COUNTDOWN | TIMER_ENABLE_IRQ; | 
|  | spin_lock_irqsave(&chip->reg_lock, flags); | 
|  | snd_azf3328_codec_outl(chip, IDX_IO_TIMER_VALUE, delay); | 
|  | spin_unlock_irqrestore(&chip->reg_lock, flags); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_timer_stop(struct snd_timer *timer) | 
|  | { | 
|  | struct snd_azf3328 *chip; | 
|  | unsigned long flags; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | chip = snd_timer_chip(timer); | 
|  | spin_lock_irqsave(&chip->reg_lock, flags); | 
|  | /* disable timer countdown and interrupt */ | 
|  | /* FIXME: should we write TIMER_ACK_IRQ here? */ | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0); | 
|  | spin_unlock_irqrestore(&chip->reg_lock, flags); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | snd_azf3328_timer_precise_resolution(struct snd_timer *timer, | 
|  | unsigned long *num, unsigned long *den) | 
|  | { | 
|  | snd_azf3328_dbgcallenter(); | 
|  | *num = 1; | 
|  | *den = 1024000 / seqtimer_scaling; | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct snd_timer_hardware snd_azf3328_timer_hw = { | 
|  | .flags = SNDRV_TIMER_HW_AUTO, | 
|  | .resolution = 977, /* 1000000/1024000 = 0.9765625us */ | 
|  | .ticks = 1024000, /* max tick count, defined by the value register; actually it's not 1024000, but 1048576, but we don't care */ | 
|  | .start = snd_azf3328_timer_start, | 
|  | .stop = snd_azf3328_timer_stop, | 
|  | .precise_resolution = snd_azf3328_timer_precise_resolution, | 
|  | }; | 
|  |  | 
|  | static int __devinit | 
|  | snd_azf3328_timer(struct snd_azf3328 *chip, int device) | 
|  | { | 
|  | struct snd_timer *timer = NULL; | 
|  | struct snd_timer_id tid; | 
|  | int err; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | tid.dev_class = SNDRV_TIMER_CLASS_CARD; | 
|  | tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE; | 
|  | tid.card = chip->card->number; | 
|  | tid.device = device; | 
|  | tid.subdevice = 0; | 
|  |  | 
|  | snd_azf3328_timer_hw.resolution *= seqtimer_scaling; | 
|  | snd_azf3328_timer_hw.ticks /= seqtimer_scaling; | 
|  | if ((err = snd_timer_new(chip->card, "AZF3328", &tid, &timer)) < 0) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | strcpy(timer->name, "AZF3328 timer"); | 
|  | timer->private_data = chip; | 
|  | timer->hw = snd_azf3328_timer_hw; | 
|  |  | 
|  | chip->timer = timer; | 
|  |  | 
|  | err = 0; | 
|  |  | 
|  | out: | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /******************************************************************/ | 
|  |  | 
|  | #if 0 | 
|  | /* check whether a bit can be modified */ | 
|  | static void | 
|  | snd_azf3328_test_bit(unsigned int reg, int bit) | 
|  | { | 
|  | unsigned char val, valoff, valon; | 
|  |  | 
|  | val = inb(reg); | 
|  |  | 
|  | outb(val & ~(1 << bit), reg); | 
|  | valoff = inb(reg); | 
|  |  | 
|  | outb(val|(1 << bit), reg); | 
|  | valon = inb(reg); | 
|  |  | 
|  | outb(val, reg); | 
|  |  | 
|  | printk(KERN_ERR "reg %04x bit %d: %02x %02x %02x\n", reg, bit, val, valoff, valon); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void | 
|  | snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip) | 
|  | { | 
|  | #if DEBUG_MISC | 
|  | u16 tmp; | 
|  |  | 
|  | snd_azf3328_dbgmisc("codec_port 0x%lx, io2_port 0x%lx, mpu_port 0x%lx, synth_port 0x%lx, mixer_port 0x%lx, irq %d\n", chip->codec_port, chip->io2_port, chip->mpu_port, chip->synth_port, chip->mixer_port, chip->irq); | 
|  |  | 
|  | snd_azf3328_dbgmisc("io2 %02x %02x %02x %02x %02x %02x\n", snd_azf3328_io2_inb(chip, 0), snd_azf3328_io2_inb(chip, 1), snd_azf3328_io2_inb(chip, 2), snd_azf3328_io2_inb(chip, 3), snd_azf3328_io2_inb(chip, 4), snd_azf3328_io2_inb(chip, 5)); | 
|  |  | 
|  | for (tmp=0; tmp <= 0x01; tmp += 1) | 
|  | snd_azf3328_dbgmisc("0x%02x: opl 0x%04x, mpu300 0x%04x, mpu310 0x%04x, mpu320 0x%04x, mpu330 0x%04x\n", tmp, inb(0x388 + tmp), inb(0x300 + tmp), inb(0x310 + tmp), inb(0x320 + tmp), inb(0x330 + tmp)); | 
|  |  | 
|  | for (tmp = 0; tmp <= 0x6E; tmp += 2) | 
|  | snd_azf3328_dbgmisc("0x%02x: 0x%04x\n", tmp, snd_azf3328_codec_inb(chip, tmp)); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static int __devinit | 
|  | snd_azf3328_create(struct snd_card *card, | 
|  | struct pci_dev *pci, | 
|  | unsigned long device_type, | 
|  | struct snd_azf3328 ** rchip) | 
|  | { | 
|  | struct snd_azf3328 *chip; | 
|  | int err; | 
|  | static struct snd_device_ops ops = { | 
|  | .dev_free =     snd_azf3328_dev_free, | 
|  | }; | 
|  | u16 tmp; | 
|  |  | 
|  | *rchip = NULL; | 
|  |  | 
|  | if ((err = pci_enable_device(pci)) < 0) | 
|  | return err; | 
|  |  | 
|  | chip = kzalloc(sizeof(*chip), GFP_KERNEL); | 
|  | if (chip == NULL) { | 
|  | err = -ENOMEM; | 
|  | goto out_err; | 
|  | } | 
|  | spin_lock_init(&chip->reg_lock); | 
|  | chip->card = card; | 
|  | chip->pci = pci; | 
|  | chip->irq = -1; | 
|  |  | 
|  | /* check if we can restrict PCI DMA transfers to 24 bits */ | 
|  | if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 || | 
|  | pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) { | 
|  | snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); | 
|  | err = -ENXIO; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | if ((err = pci_request_regions(pci, "Aztech AZF3328")) < 0) { | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | chip->codec_port = pci_resource_start(pci, 0); | 
|  | chip->io2_port   = pci_resource_start(pci, 1); | 
|  | chip->mpu_port   = pci_resource_start(pci, 2); | 
|  | chip->synth_port = pci_resource_start(pci, 3); | 
|  | chip->mixer_port = pci_resource_start(pci, 4); | 
|  |  | 
|  | if (request_irq(pci->irq, snd_azf3328_interrupt, IRQF_DISABLED|IRQF_SHARED, card->shortname, (void *)chip)) { | 
|  | snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq); | 
|  | err = -EBUSY; | 
|  | goto out_err; | 
|  | } | 
|  | chip->irq = pci->irq; | 
|  | pci_set_master(pci); | 
|  | synchronize_irq(chip->irq); | 
|  |  | 
|  | snd_azf3328_debug_show_ports(chip); | 
|  |  | 
|  | if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | /* create mixer interface & switches */ | 
|  | if ((err = snd_azf3328_mixer_new(chip)) < 0) | 
|  | goto out_err; | 
|  |  | 
|  | #if 0 | 
|  | /* set very low bitrate to reduce noise and power consumption? */ | 
|  | snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, 5512, 8, 1); | 
|  | #endif | 
|  |  | 
|  | /* standard chip init stuff */ | 
|  | /* default IRQ init value */ | 
|  | tmp = DMA_PLAY_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE; | 
|  |  | 
|  | spin_lock_irq(&chip->reg_lock); | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_PLAY_FLAGS, tmp); | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_REC_FLAGS, tmp); | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_SOMETHING_FLAGS, tmp); | 
|  | snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x00); /* disable timer */ | 
|  | spin_unlock_irq(&chip->reg_lock); | 
|  |  | 
|  | snd_card_set_dev(card, &pci->dev); | 
|  |  | 
|  | *rchip = chip; | 
|  |  | 
|  | err = 0; | 
|  | goto out; | 
|  |  | 
|  | out_err: | 
|  | if (chip) | 
|  | snd_azf3328_free(chip); | 
|  | pci_disable_device(pci); | 
|  |  | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __devinit | 
|  | snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) | 
|  | { | 
|  | static int dev; | 
|  | struct snd_card *card; | 
|  | struct snd_azf3328 *chip; | 
|  | struct snd_opl3 *opl3; | 
|  | int err; | 
|  |  | 
|  | snd_azf3328_dbgcallenter(); | 
|  | if (dev >= SNDRV_CARDS) | 
|  | return -ENODEV; | 
|  | if (!enable[dev]) { | 
|  | dev++; | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0 ); | 
|  | if (card == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | strcpy(card->driver, "AZF3328"); | 
|  | strcpy(card->shortname, "Aztech AZF3328 (PCI168)"); | 
|  |  | 
|  | if ((err = snd_azf3328_create(card, pci, pci_id->driver_data, &chip)) < 0) { | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | card->private_data = chip; | 
|  |  | 
|  | if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401, | 
|  | chip->mpu_port, MPU401_INFO_INTEGRATED, | 
|  | pci->irq, 0, &chip->rmidi)) < 0) { | 
|  | snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port); | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | if ((err = snd_azf3328_timer(chip, 0)) < 0) { | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | if ((err = snd_azf3328_pcm(chip, 0)) < 0) { | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | if (snd_opl3_create(card, chip->synth_port, chip->synth_port+2, | 
|  | OPL3_HW_AUTO, 1, &opl3) < 0) { | 
|  | snd_printk(KERN_ERR "azf3328: no OPL3 device at 0x%lx-0x%lx?\n", | 
|  | chip->synth_port, chip->synth_port+2 ); | 
|  | } else { | 
|  | if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) { | 
|  | goto out_err; | 
|  | } | 
|  | } | 
|  |  | 
|  | opl3->private_data = chip; | 
|  |  | 
|  | sprintf(card->longname, "%s at 0x%lx, irq %i", | 
|  | card->shortname, chip->codec_port, chip->irq); | 
|  |  | 
|  | if ((err = snd_card_register(card)) < 0) { | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | #ifdef MODULE | 
|  | printk( | 
|  | "azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168\n" | 
|  | "azt3328: (hardware was completely undocumented - ZERO support from Aztech).\n" | 
|  | "azt3328: Feel free to contact andi AT lisas.de for bug reports etc.!\n" | 
|  | "azt3328: User-scalable sequencer timer set to %dHz (1024000Hz / %d).\n", | 
|  | 1024000 / seqtimer_scaling, seqtimer_scaling); | 
|  | #endif | 
|  |  | 
|  | if (snd_azf3328_config_joystick(chip, dev) < 0) | 
|  | snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, | 
|  | snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) & ~LEGACY_JOY); | 
|  |  | 
|  | pci_set_drvdata(pci, card); | 
|  | dev++; | 
|  |  | 
|  | err = 0; | 
|  | goto out; | 
|  |  | 
|  | out_err: | 
|  | snd_card_free(card); | 
|  |  | 
|  | out: | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __devexit | 
|  | snd_azf3328_remove(struct pci_dev *pci) | 
|  | { | 
|  | snd_azf3328_dbgcallenter(); | 
|  | snd_card_free(pci_get_drvdata(pci)); | 
|  | pci_set_drvdata(pci, NULL); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int | 
|  | snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state) | 
|  | { | 
|  | struct snd_card *card = pci_get_drvdata(pci); | 
|  | struct snd_azf3328 *chip = card->private_data; | 
|  | int reg; | 
|  |  | 
|  | snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); | 
|  |  | 
|  | snd_pcm_suspend_all(chip->pcm); | 
|  |  | 
|  | for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; reg++) | 
|  | chip->saved_regs_mixer[reg] = inw(chip->mixer_port + reg * 2); | 
|  |  | 
|  | /* make sure to disable master volume etc. to prevent looping sound */ | 
|  | snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1); | 
|  | snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); | 
|  |  | 
|  | for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; reg++) | 
|  | chip->saved_regs_codec[reg] = inw(chip->codec_port + reg * 2); | 
|  | for (reg = 0; reg < AZF_IO_SIZE_IO2_PM / 2; reg++) | 
|  | chip->saved_regs_io2[reg] = inw(chip->io2_port + reg * 2); | 
|  | for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; reg++) | 
|  | chip->saved_regs_mpu[reg] = inw(chip->mpu_port + reg * 2); | 
|  | for (reg = 0; reg < AZF_IO_SIZE_SYNTH_PM / 2; reg++) | 
|  | chip->saved_regs_synth[reg] = inw(chip->synth_port + reg * 2); | 
|  |  | 
|  | pci_set_power_state(pci, PCI_D3hot); | 
|  | pci_disable_device(pci); | 
|  | pci_save_state(pci); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | snd_azf3328_resume(struct pci_dev *pci) | 
|  | { | 
|  | struct snd_card *card = pci_get_drvdata(pci); | 
|  | struct snd_azf3328 *chip = card->private_data; | 
|  | int reg; | 
|  |  | 
|  | pci_restore_state(pci); | 
|  | pci_enable_device(pci); | 
|  | pci_set_power_state(pci, PCI_D0); | 
|  | pci_set_master(pci); | 
|  |  | 
|  | for (reg = 0; reg < AZF_IO_SIZE_IO2_PM / 2; reg++) | 
|  | outw(chip->saved_regs_io2[reg], chip->io2_port + reg * 2); | 
|  | for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; reg++) | 
|  | outw(chip->saved_regs_mpu[reg], chip->mpu_port + reg * 2); | 
|  | for (reg = 0; reg < AZF_IO_SIZE_SYNTH_PM / 2; reg++) | 
|  | outw(chip->saved_regs_synth[reg], chip->synth_port + reg * 2); | 
|  | for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; reg++) | 
|  | outw(chip->saved_regs_mixer[reg], chip->mixer_port + reg * 2); | 
|  | for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; reg++) | 
|  | outw(chip->saved_regs_codec[reg], chip->codec_port + reg * 2); | 
|  |  | 
|  | snd_power_change_state(card, SNDRV_CTL_POWER_D0); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  | static struct pci_driver driver = { | 
|  | .name = "AZF3328", | 
|  | .id_table = snd_azf3328_ids, | 
|  | .probe = snd_azf3328_probe, | 
|  | .remove = __devexit_p(snd_azf3328_remove), | 
|  | #ifdef CONFIG_PM | 
|  | .suspend = snd_azf3328_suspend, | 
|  | .resume = snd_azf3328_resume, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | alsa_card_azf3328_init(void) | 
|  | { | 
|  | int err; | 
|  | snd_azf3328_dbgcallenter(); | 
|  | err = pci_register_driver(&driver); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | alsa_card_azf3328_exit(void) | 
|  | { | 
|  | snd_azf3328_dbgcallenter(); | 
|  | pci_unregister_driver(&driver); | 
|  | snd_azf3328_dbgcallleave(); | 
|  | } | 
|  |  | 
|  | module_init(alsa_card_azf3328_init) | 
|  | module_exit(alsa_card_azf3328_exit) |