USB: EHCI: remove ehci_port_power() routine
This patch (as1623) removes the ehci_port_power() routine and all the
places that call it. There's no reason for ehci-hcd to change the
port power settings; the hub driver takes care of all that stuff.
There is one exception: When the controller is resumed from
hibernation or following a loss of power, the ports that are supposed
to be handed over to a companion controller must be powered on first.
Otherwise the handover won't work. This process is not visible to the
hub driver, so it has to be handled in ehci-hcd.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index a2c56cd..a59c61f 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -56,6 +56,19 @@
if (!ehci->owned_ports)
return;
+ /* Make sure the ports are powered */
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ if (test_bit(port, &ehci->owned_ports)) {
+ reg = &ehci->regs->port_status[port];
+ status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+ if (!(status & PORT_POWER)) {
+ status |= PORT_POWER;
+ ehci_writel(ehci, status, reg);
+ }
+ }
+ }
+
/* Give the connections some time to appear */
msleep(20);