MIPS: Netlogic: Merge platform usb.h to usb-init.c
The definitions are not used anywhere else, and merging it will
make adding the new USB definitions for XLPII series easier.
While there, cleanup some whitespace in usb-init.c. There is no
change to logic due to this commit.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5027/
Acked-by: John Crispin <blogic@openwrt.org>
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
index 1d0b66c..9c401dd 100644
--- a/arch/mips/netlogic/xlp/usb-init.c
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -42,7 +42,30 @@
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlp-hal/iomap.h>
#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/usb.h>
+
+/*
+ * USB glue logic registers, used only during initialization
+ */
+#define USB_CTL_0 0x01
+#define USB_PHY_0 0x0A
+#define USB_PHY_RESET 0x01
+#define USB_PHY_PORT_RESET_0 0x10
+#define USB_PHY_PORT_RESET_1 0x20
+#define USB_CONTROLLER_RESET 0x01
+#define USB_INT_STATUS 0x0E
+#define USB_INT_EN 0x0F
+#define USB_PHY_INTERRUPT_EN 0x01
+#define USB_OHCI_INTERRUPT_EN 0x02
+#define USB_OHCI_INTERRUPT1_EN 0x04
+#define USB_OHCI_INTERRUPT2_EN 0x08
+#define USB_CTRL_INTERRUPT_EN 0x10
+
+#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_usb_pcibase(node, inst) \
+ nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
+#define nlm_get_usb_regbase(node, inst) \
+ (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
static void nlm_usb_intr_en(int node, int port)
{
@@ -99,23 +122,23 @@
dev->dev.coherent_dma_mask = DMA_BIT_MASK(64);
switch (dev->devfn) {
case 0x10:
- dev->irq = PIC_EHCI_0_IRQ;
- break;
+ dev->irq = PIC_EHCI_0_IRQ;
+ break;
case 0x11:
- dev->irq = PIC_OHCI_0_IRQ;
- break;
+ dev->irq = PIC_OHCI_0_IRQ;
+ break;
case 0x12:
- dev->irq = PIC_OHCI_1_IRQ;
- break;
+ dev->irq = PIC_OHCI_1_IRQ;
+ break;
case 0x13:
- dev->irq = PIC_EHCI_1_IRQ;
- break;
+ dev->irq = PIC_EHCI_1_IRQ;
+ break;
case 0x14:
- dev->irq = PIC_OHCI_2_IRQ;
- break;
+ dev->irq = PIC_OHCI_2_IRQ;
+ break;
case 0x15:
- dev->irq = PIC_OHCI_3_IRQ;
- break;
+ dev->irq = PIC_OHCI_3_IRQ;
+ break;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,