drivers/net/wireless: Use wiphy_<level>
Standardize the logging macros used.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index e51650e..d687cb7 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -149,16 +149,15 @@
continue;
if (list->channels[i].data != CHAN_HAS_ALL) {
- printk(KERN_ERR "%s:%s%s%s is/are missing for "
- "channel:%d [%d MHz].\n",
- wiphy_name(dev->wiphy),
- (list->channels[i].data & CHAN_HAS_CAL ? "" :
- " [iqauto calibration data]"),
- (list->channels[i].data & CHAN_HAS_LIMIT ? "" :
- " [output power limits]"),
- (list->channels[i].data & CHAN_HAS_CURVE ? "" :
- " [curve data]"),
- list->channels[i].index, list->channels[i].freq);
+ wiphy_err(dev->wiphy,
+ "%s%s%s is/are missing for channel:%d [%d MHz].\n",
+ (list->channels[i].data & CHAN_HAS_CAL ? "" :
+ " [iqauto calibration data]"),
+ (list->channels[i].data & CHAN_HAS_LIMIT ? "" :
+ " [output power limits]"),
+ (list->channels[i].data & CHAN_HAS_CURVE ? "" :
+ " [curve data]"),
+ list->channels[i].index, list->channels[i].freq);
continue;
}
@@ -168,9 +167,8 @@
}
if (j == 0) {
- printk(KERN_ERR "%s: Disabling totally damaged %s band.\n",
- wiphy_name(dev->wiphy), (band == IEEE80211_BAND_2GHZ) ?
- "2 GHz" : "5 GHz");
+ wiphy_err(dev->wiphy, "disabling totally damaged %d GHz band\n",
+ (band == IEEE80211_BAND_2GHZ) ? 2 : 5);
ret = -ENODATA;
goto err_out;
@@ -244,9 +242,9 @@
if ((priv->iq_autocal_len != priv->curve_data->entries) ||
(priv->iq_autocal_len != priv->output_limit->entries))
- printk(KERN_ERR "%s: Unsupported or damaged EEPROM detected. "
- "You may not be able to use all channels.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy,
+ "Unsupported or damaged EEPROM detected. "
+ "You may not be able to use all channels.\n");
max_channel_num = max_t(unsigned int, priv->output_limit->entries,
priv->iq_autocal_len);
@@ -419,15 +417,14 @@
int i;
if (len != (entry_size * num_entries)) {
- printk(KERN_ERR "%s: unknown rssi calibration data packing "
- " type:(%x) len:%d.\n",
- wiphy_name(dev->wiphy), type, len);
+ wiphy_err(dev->wiphy,
+ "unknown rssi calibration data packing type:(%x) len:%d.\n",
+ type, len);
print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
data, len);
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "please report this issue.\n");
return;
}
@@ -445,15 +442,14 @@
struct pda_country *country;
if (len != sizeof(*country)) {
- printk(KERN_ERR "%s: found possible invalid default country "
- "eeprom entry. (entry size: %d)\n",
- wiphy_name(dev->wiphy), len);
+ wiphy_err(dev->wiphy,
+ "found possible invalid default country eeprom entry. (entry size: %d)\n",
+ len);
print_hex_dump_bytes("country:", DUMP_PREFIX_NONE,
data, len);
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "please report this issue.\n");
return;
}
@@ -478,8 +474,8 @@
return -EINVAL;
if (data[0] != 0) {
- printk(KERN_ERR "%s: unknown output power db revision:%x\n",
- wiphy_name(dev->wiphy), data[0]);
+ wiphy_err(dev->wiphy, "unknown output power db revision:%x\n",
+ data[0]);
return -EINVAL;
}
@@ -587,10 +583,9 @@
err = p54_convert_rev1(dev, curve_data);
break;
default:
- printk(KERN_ERR "%s: unknown curve data "
- "revision %d\n",
- wiphy_name(dev->wiphy),
- curve_data->cal_method_rev);
+ wiphy_err(dev->wiphy,
+ "unknown curve data revision %d\n",
+ curve_data->cal_method_rev);
err = -ENODEV;
break;
}
@@ -672,8 +667,8 @@
if (!synth || !priv->iq_autocal || !priv->output_limit ||
!priv->curve_data) {
- printk(KERN_ERR "%s: not all required entries found in eeprom!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy,
+ "not all required entries found in eeprom!\n");
err = -EINVAL;
goto err;
}
@@ -699,15 +694,15 @@
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
u8 perm_addr[ETH_ALEN];
- printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n",
- wiphy_name(dev->wiphy));
+ wiphy_warn(dev->wiphy,
+ "invalid hwaddr! using randomly generated mac addr\n");
random_ether_addr(perm_addr);
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
- printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n",
- wiphy_name(dev->wiphy), dev->wiphy->perm_addr, priv->version,
- p54_rf_chips[priv->rxhw]);
+ wiphy_info(dev->wiphy, "hwaddr %pm, mac:isl38%02x rf:%s\n",
+ dev->wiphy->perm_addr, priv->version,
+ p54_rf_chips[priv->rxhw]);
return 0;
@@ -719,8 +714,7 @@
priv->output_limit = NULL;
priv->curve_data = NULL;
- printk(KERN_ERR "%s: eeprom parse failed!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "eeprom parse failed!\n");
return err;
}
EXPORT_SYMBOL_GPL(p54_parse_eeprom);
diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c
index c43a5d4..47006bc 100644
--- a/drivers/net/wireless/p54/fwio.c
+++ b/drivers/net/wireless/p54/fwio.c
@@ -62,16 +62,15 @@
case FW_LM20:
case FW_LM87: {
char *iftype = (char *)bootrec->data;
- printk(KERN_INFO "%s: p54 detected a LM%c%c "
- "firmware\n",
- wiphy_name(priv->hw->wiphy),
- iftype[2], iftype[3]);
+ wiphy_info(priv->hw->wiphy,
+ "p54 detected a LM%c%c firmware\n",
+ iftype[2], iftype[3]);
break;
}
case FW_FMAC:
default:
- printk(KERN_ERR "%s: unsupported firmware\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy,
+ "unsupported firmware\n");
return -ENODEV;
}
break;
@@ -125,15 +124,15 @@
}
if (fw_version)
- printk(KERN_INFO "%s: FW rev %s - Softmac protocol %x.%x\n",
- wiphy_name(priv->hw->wiphy), fw_version,
- priv->fw_var >> 8, priv->fw_var & 0xff);
+ wiphy_info(priv->hw->wiphy,
+ "fw rev %s - softmac protocol %x.%x\n",
+ fw_version, priv->fw_var >> 8, priv->fw_var & 0xff);
if (priv->fw_var < 0x500)
- printk(KERN_INFO "%s: you are using an obsolete firmware. "
- "visit http://wireless.kernel.org/en/users/Drivers/p54 "
- "and grab one for \"kernel >= 2.6.28\"!\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_info(priv->hw->wiphy,
+ "you are using an obsolete firmware. "
+ "visit http://wireless.kernel.org/en/users/Drivers/p54 "
+ "and grab one for \"kernel >= 2.6.28\"!\n");
if (priv->fw_var >= 0x300) {
/* Firmware supports QoS, use it! */
@@ -152,13 +151,14 @@
priv->hw->queues = P54_QUEUE_AC_NUM;
}
- printk(KERN_INFO "%s: cryptographic accelerator "
- "WEP:%s, TKIP:%s, CCMP:%s\n", wiphy_name(priv->hw->wiphy),
- (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" :
- "no", (priv->privacy_caps & (BR_DESC_PRIV_CAP_TKIP |
- BR_DESC_PRIV_CAP_MICHAEL)) ? "YES" : "no",
- (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ?
- "YES" : "no");
+ wiphy_info(priv->hw->wiphy,
+ "cryptographic accelerator WEP:%s, TKIP:%s, CCMP:%s\n",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" : "no",
+ (priv->privacy_caps &
+ (BR_DESC_PRIV_CAP_TKIP | BR_DESC_PRIV_CAP_MICHAEL))
+ ? "YES" : "no",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)
+ ? "YES" : "no");
if (priv->rx_keycache_size) {
/*
@@ -247,8 +247,7 @@
if (!wait_for_completion_interruptible_timeout(
&priv->eeprom_comp, HZ)) {
- printk(KERN_ERR "%s: device does not respond!\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy, "device does not respond!\n");
ret = -EBUSY;
}
priv->eeprom = NULL;
@@ -523,9 +522,9 @@
return 0;
err:
- printk(KERN_ERR "%s: frequency change to channel %d failed.\n",
- wiphy_name(priv->hw->wiphy), ieee80211_frequency_to_channel(
- priv->hw->conf.channel->center_freq));
+ wiphy_err(priv->hw->wiphy, "frequency change to channel %d failed.\n",
+ ieee80211_frequency_to_channel(
+ priv->hw->conf.channel->center_freq));
dev_kfree_skb_any(skb);
return -EINVAL;
@@ -676,8 +675,8 @@
break;
default:
- printk(KERN_ERR "%s: invalid cryptographic algorithm: %d\n",
- wiphy_name(priv->hw->wiphy), algo);
+ wiphy_err(priv->hw->wiphy,
+ "invalid cryptographic algorithm: %d\n", algo);
dev_kfree_skb(skb);
return -EINVAL;
}
diff --git a/drivers/net/wireless/p54/led.c b/drivers/net/wireless/p54/led.c
index 9575ac0..ea91f5c 100644
--- a/drivers/net/wireless/p54/led.c
+++ b/drivers/net/wireless/p54/led.c
@@ -57,8 +57,8 @@
err = p54_set_leds(priv);
if (err && net_ratelimit())
- printk(KERN_ERR "%s: failed to update LEDs (%d).\n",
- wiphy_name(priv->hw->wiphy), err);
+ wiphy_err(priv->hw->wiphy,
+ "failed to update leds (%d).\n", err);
if (rerun)
ieee80211_queue_delayed_work(priv->hw, &priv->led_work,
@@ -102,8 +102,8 @@
err = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_dev);
if (err)
- printk(KERN_ERR "%s: Failed to register %s LED.\n",
- wiphy_name(priv->hw->wiphy), name);
+ wiphy_err(priv->hw->wiphy,
+ "failed to register %s led.\n", name);
else
led->registered = 1;
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index a5ea89c..822f8dc 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -466,8 +466,7 @@
P54P_READ(dev_int);
if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
- printk(KERN_ERR "%s: Cannot boot firmware!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "cannot boot firmware!\n");
p54p_stop(dev);
return -ETIMEDOUT;
}
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 4e68910..427b46f 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -38,8 +38,8 @@
u32 largest_hole = 0, free;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) ---\n",
- wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));
+ wiphy_debug(priv->hw->wiphy, "/ --- tx queue dump (%d entries) ---\n",
+ skb_queue_len(&priv->tx_queue));
prev_addr = priv->rx_start;
skb_queue_walk(&priv->tx_queue, skb) {
@@ -48,21 +48,23 @@
hdr = (void *) skb->data;
free = range->start_addr - prev_addr;
- printk(KERN_DEBUG "%s: | [%02d] => [skb:%p skb_len:0x%04x "
- "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} "
- "mem:{start:%04x end:%04x, free:%d}]\n",
- wiphy_name(priv->hw->wiphy), i++, skb, skb->len,
- le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len),
- le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type),
- range->start_addr, range->end_addr, free);
+ wiphy_debug(priv->hw->wiphy,
+ "| [%02d] => [skb:%p skb_len:0x%04x "
+ "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} "
+ "mem:{start:%04x end:%04x, free:%d}]\n",
+ i++, skb, skb->len,
+ le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len),
+ le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type),
+ range->start_addr, range->end_addr, free);
prev_addr = range->end_addr;
largest_hole = max(largest_hole, free);
}
free = priv->rx_end - prev_addr;
largest_hole = max(largest_hole, free);
- printk(KERN_DEBUG "%s: \\ --- [free: %d], largest free block: %d ---\n",
- wiphy_name(priv->hw->wiphy), free, largest_hole);
+ wiphy_debug(priv->hw->wiphy,
+ "\\ --- [free: %d], largest free block: %d ---\n",
+ free, largest_hole);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
}
#endif /* P54_MM_DEBUG */
@@ -538,8 +540,7 @@
case P54_TRAP_BEACON_TX:
break;
case P54_TRAP_RADAR:
- printk(KERN_INFO "%s: radar (freq:%d MHz)\n",
- wiphy_name(priv->hw->wiphy), freq);
+ wiphy_info(priv->hw->wiphy, "radar (freq:%d mhz)\n", freq);
break;
case P54_TRAP_NO_BEACON:
if (priv->vif)
@@ -558,8 +559,8 @@
wiphy_rfkill_set_hw_state(priv->hw->wiphy, false);
break;
default:
- printk(KERN_INFO "%s: received event:%x freq:%d\n",
- wiphy_name(priv->hw->wiphy), event, freq);
+ wiphy_info(priv->hw->wiphy, "received event:%x freq:%d\n",
+ event, freq);
break;
}
}
@@ -584,8 +585,9 @@
p54_rx_eeprom_readback(priv, skb);
break;
default:
- printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n",
- wiphy_name(priv->hw->wiphy), le16_to_cpu(hdr->type));
+ wiphy_debug(priv->hw->wiphy,
+ "not handling 0x%02x type control frame\n",
+ le16_to_cpu(hdr->type));
break;
}
return 0;