drivers/net/wireless: Use wiphy_<level>
Standardize the logging macros used.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c
index c43a5d4..47006bc 100644
--- a/drivers/net/wireless/p54/fwio.c
+++ b/drivers/net/wireless/p54/fwio.c
@@ -62,16 +62,15 @@
case FW_LM20:
case FW_LM87: {
char *iftype = (char *)bootrec->data;
- printk(KERN_INFO "%s: p54 detected a LM%c%c "
- "firmware\n",
- wiphy_name(priv->hw->wiphy),
- iftype[2], iftype[3]);
+ wiphy_info(priv->hw->wiphy,
+ "p54 detected a LM%c%c firmware\n",
+ iftype[2], iftype[3]);
break;
}
case FW_FMAC:
default:
- printk(KERN_ERR "%s: unsupported firmware\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy,
+ "unsupported firmware\n");
return -ENODEV;
}
break;
@@ -125,15 +124,15 @@
}
if (fw_version)
- printk(KERN_INFO "%s: FW rev %s - Softmac protocol %x.%x\n",
- wiphy_name(priv->hw->wiphy), fw_version,
- priv->fw_var >> 8, priv->fw_var & 0xff);
+ wiphy_info(priv->hw->wiphy,
+ "fw rev %s - softmac protocol %x.%x\n",
+ fw_version, priv->fw_var >> 8, priv->fw_var & 0xff);
if (priv->fw_var < 0x500)
- printk(KERN_INFO "%s: you are using an obsolete firmware. "
- "visit http://wireless.kernel.org/en/users/Drivers/p54 "
- "and grab one for \"kernel >= 2.6.28\"!\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_info(priv->hw->wiphy,
+ "you are using an obsolete firmware. "
+ "visit http://wireless.kernel.org/en/users/Drivers/p54 "
+ "and grab one for \"kernel >= 2.6.28\"!\n");
if (priv->fw_var >= 0x300) {
/* Firmware supports QoS, use it! */
@@ -152,13 +151,14 @@
priv->hw->queues = P54_QUEUE_AC_NUM;
}
- printk(KERN_INFO "%s: cryptographic accelerator "
- "WEP:%s, TKIP:%s, CCMP:%s\n", wiphy_name(priv->hw->wiphy),
- (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" :
- "no", (priv->privacy_caps & (BR_DESC_PRIV_CAP_TKIP |
- BR_DESC_PRIV_CAP_MICHAEL)) ? "YES" : "no",
- (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ?
- "YES" : "no");
+ wiphy_info(priv->hw->wiphy,
+ "cryptographic accelerator WEP:%s, TKIP:%s, CCMP:%s\n",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" : "no",
+ (priv->privacy_caps &
+ (BR_DESC_PRIV_CAP_TKIP | BR_DESC_PRIV_CAP_MICHAEL))
+ ? "YES" : "no",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)
+ ? "YES" : "no");
if (priv->rx_keycache_size) {
/*
@@ -247,8 +247,7 @@
if (!wait_for_completion_interruptible_timeout(
&priv->eeprom_comp, HZ)) {
- printk(KERN_ERR "%s: device does not respond!\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy, "device does not respond!\n");
ret = -EBUSY;
}
priv->eeprom = NULL;
@@ -523,9 +522,9 @@
return 0;
err:
- printk(KERN_ERR "%s: frequency change to channel %d failed.\n",
- wiphy_name(priv->hw->wiphy), ieee80211_frequency_to_channel(
- priv->hw->conf.channel->center_freq));
+ wiphy_err(priv->hw->wiphy, "frequency change to channel %d failed.\n",
+ ieee80211_frequency_to_channel(
+ priv->hw->conf.channel->center_freq));
dev_kfree_skb_any(skb);
return -EINVAL;
@@ -676,8 +675,8 @@
break;
default:
- printk(KERN_ERR "%s: invalid cryptographic algorithm: %d\n",
- wiphy_name(priv->hw->wiphy), algo);
+ wiphy_err(priv->hw->wiphy,
+ "invalid cryptographic algorithm: %d\n", algo);
dev_kfree_skb(skb);
return -EINVAL;
}