Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into sh-latest
Conflicts:
arch/arm/mach-shmobile/clock-sh73a0.c
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/Kconfig b/arch/Kconfig
index 4b0669c..2505740 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -30,6 +30,10 @@
config HAVE_OPROFILE
bool
+config OPROFILE_NMI_TIMER
+ def_bool y
+ depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+
config KPROBES
bool "Kprobes"
depends on MODULES
diff --git a/arch/alpha/include/asm/ipcbuf.h b/arch/alpha/include/asm/ipcbuf.h
index d9c0e1a..84c7e51 100644
--- a/arch/alpha/include/asm/ipcbuf.h
+++ b/arch/alpha/include/asm/ipcbuf.h
@@ -1,28 +1 @@
-#ifndef _ALPHA_IPCBUF_H
-#define _ALPHA_IPCBUF_H
-
-/*
- * The ipc64_perm structure for alpha architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid_t uid;
- __kernel_gid_t gid;
- __kernel_uid_t cuid;
- __kernel_gid_t cgid;
- __kernel_mode_t mode;
- unsigned short seq;
- unsigned short __pad1;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ALPHA_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 06edfef..082355f 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -69,6 +69,9 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
/* O_NONBLOCK clashes with the bits used for socket types. Therefore we
* have to define SOCK_NONBLOCK to a different value here.
*/
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index ff73db0..28335bd 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -79,7 +79,6 @@
#define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */
#define TIF_MEMDIE 13 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */
-#define TIF_FREEZE 16 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
@@ -87,7 +86,6 @@
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
/* Work to do on interrupt/exception return. */
#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h
index 8815443..0a05790 100644
--- a/arch/alpha/include/asm/types.h
+++ b/arch/alpha/include/asm/types.h
@@ -15,9 +15,4 @@
#include <asm-generic/int-l64.h>
#endif
-#ifndef __ASSEMBLY__
-
-typedef unsigned int umode_t;
-
-#endif /* __ASSEMBLY__ */
#endif /* _ALPHA_TYPES_H */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44789ef..f72e170 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -220,8 +220,9 @@
be avoided when possible.
config PHYS_OFFSET
- hex "Physical address of main memory"
+ hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ default DRAM_BASE if !MMU
help
Please provide the physical address corresponding to the
location of main memory in your system.
@@ -257,6 +258,7 @@
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
+ select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
@@ -340,10 +342,12 @@
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
+ select CACHE_L2X0
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
+ select HAVE_SMP
select USE_OF
help
Support for the Calxeda Highbank SoC based boards.
@@ -361,6 +365,7 @@
select CPU_V6K
select GENERIC_CLOCKEVENTS
select ARM_GIC
+ select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
@@ -381,6 +386,7 @@
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select ZONE_DMA
help
@@ -633,6 +639,8 @@
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SCHED_CLOCK
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_CPUFREQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -702,7 +710,9 @@
select HAVE_CLK
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
+ select HAVE_SMP
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
@@ -867,16 +877,6 @@
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
-config ARCH_TCC_926
- bool "Telechips TCC ARM926-based systems"
- select CLKSRC_MMIO
- select CPU_ARM926T
- select HAVE_CLK
- select CLKDEV_LOOKUP
- select GENERIC_CLOCKEVENTS
- help
- Support for Telechips TCC ARM926-based systems.
-
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
@@ -904,6 +904,8 @@
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Support for ST-Ericsson's Ux500 architecture
@@ -914,6 +916,7 @@
select CPU_ARM926T
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
@@ -973,6 +976,7 @@
select ARM_GIC
select ARM_AMBA
select ICST
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
help
Support for Xilinx Zynq ARM Cortex A9 Platform
@@ -1059,8 +1063,6 @@
source "arch/arm/plat-spear/Kconfig"
-source "arch/arm/plat-tcc/Kconfig"
-
if ARCH_S3C2410
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
@@ -1125,6 +1127,11 @@
source arch/arm/mm/Kconfig
+config ARM_NR_BANKS
+ int
+ default 16 if ARCH_EP93XX
+ default 8
+
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
@@ -1133,10 +1140,9 @@
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
-# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
config XSCALE_PMU
bool
- depends on CPU_XSCALE && !XSCALE_PMU_TIMER
+ depends on CPU_XSCALE
default y
config CPU_HAS_PMU
@@ -1231,7 +1237,7 @@
capabilities of the processor.
config PL310_ERRATA_588369
- bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+ bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
@@ -1245,7 +1251,7 @@
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
- depends on CPU_V7 && SMP
+ depends on CPU_V7
help
This option enables the workaround for the 720789 Cortex-A9 (prior to
r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
@@ -1256,7 +1262,7 @@
entries regardless of the ASID.
config PL310_ERRATA_727915
- bool "Background Clean & Invalidate by Way operation can cause data corruption"
+ bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
depends on CACHE_L2X0
help
PL310 implements the Clean & Invalidate by Way L2 cache maintenance
@@ -1281,7 +1287,7 @@
config ARM_ERRATA_751472
bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
- depends on CPU_V7 && SMP
+ depends on CPU_V7
help
This option enables the workaround for the 751472 Cortex-A9 (prior
to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
@@ -1289,8 +1295,8 @@
operation is received by a CPU before the ICIALLUIS has completed,
potentially leading to corrupted entries in the cache or TLB.
-config ARM_ERRATA_753970
- bool "ARM errata: cache sync operation may be faulty"
+config PL310_ERRATA_753970
+ bool "PL310 errata: cache sync operation may be faulty"
depends on CACHE_PL310
help
This option enables the workaround for the 753970 PL310 (r3p0) erratum.
@@ -1352,6 +1358,18 @@
relevant cache maintenance functions and sets a specific bit
in the diagnostic control register of the SCU.
+config PL310_ERRATA_769419
+ bool "PL310 errata: no automatic Store Buffer drain"
+ depends on CACHE_L2X0
+ help
+ On revisions of the PL310 prior to r3p2, the Store Buffer does
+ not automatically drain. This can cause normal, non-cacheable
+ writes to be retained when the memory system is idle, leading
+ to suboptimal I/O performance for drivers using coherent DMA.
+ This option adds a write barrier to the cpu_idle loop so that,
+ on systems with an outer cache, the store buffer is drained
+ explicitly.
+
endmenu
source "arch/arm/common/Kconfig"
@@ -1422,14 +1440,20 @@
source "kernel/time/Kconfig"
+config HAVE_SMP
+ bool
+ help
+ This option should be selected by machines which have an SMP-
+ capable CPU.
+
+ The only effect of this option is to make the SMP-related
+ options available to the user for configuration.
+
config SMP
bool "Symmetric Multi-Processing"
depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
- depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
- ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
+ depends on HAVE_SMP
depends on MMU
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
@@ -1547,6 +1571,16 @@
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
+config ARCH_NR_GPIO
+ int
+ default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
+ default 350 if ARCH_U8500
+ default 0
+ help
+ Maximum number of GPIOs in the system.
+
+ If unsure, leave the default value.
+
source kernel/Kconfig.preempt
config HZ
@@ -1959,7 +1993,7 @@
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
- depends on !ZBOOT_ROM
+ depends on !ZBOOT_ROM && !ARM_LPAE
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -1989,7 +2023,7 @@
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index dfcf3b0..40319d9 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -184,7 +184,6 @@
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
@@ -204,7 +203,6 @@
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
-plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_ARCH_ZYNQ) := versatile
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 21f56ff..cf0a64c 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -126,7 +126,8 @@
asflags-y := -Wa,-march=all
# Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
+ awk 'END{print $$3}')
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c2effc9..c5d6025 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -659,6 +659,7 @@
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
#endif
+ mcr p15, 0, r0, c7, c5, 4 @ ISB
mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back
mov r0, #0
diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi
new file mode 100644
index 0000000..ec0c4e6
--- /dev/null
+++ b/arch/arm/boot/dts/testcases/tests-phandle.dtsi
@@ -0,0 +1,37 @@
+
+/ {
+ testcase-data {
+ phandle-tests {
+ provider0: provider0 {
+ #phandle-cells = <0>;
+ };
+
+ provider1: provider1 {
+ #phandle-cells = <1>;
+ };
+
+ provider2: provider2 {
+ #phandle-cells = <2>;
+ };
+
+ provider3: provider3 {
+ #phandle-cells = <3>;
+ };
+
+ consumer-a {
+ phandle-list = <&provider1 1>,
+ <&provider2 2 0>,
+ <0>,
+ <&provider3 4 4 3>,
+ <&provider2 5 100>,
+ <&provider0>,
+ <&provider1 7>;
+ phandle-list-names = "first", "second", "third";
+
+ phandle-list-bad-phandle = <12345678 0 0>;
+ phandle-list-bad-args = <&provider2 1 0>,
+ <&provider3 0>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi
new file mode 100644
index 0000000..a7c5067
--- /dev/null
+++ b/arch/arm/boot/dts/testcases/tests.dtsi
@@ -0,0 +1 @@
+/include/ "tests-phandle.dtsi"
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 8a614e3..1664610 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -46,3 +46,5 @@
};
};
};
+
+/include/ "testcases/tests.dtsi"
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 74df9ca..81a933e 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,8 +1,14 @@
config ARM_GIC
select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+ bool
+
+config GIC_NON_BANKED
bool
config ARM_VIC
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
bool
config ARM_VIC_NR
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 0e6ae47..b2dc2dd 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -40,13 +40,36 @@
#include <linux/slab.h>
#include <asm/irq.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
-static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+union gic_base {
+ void __iomem *common_base;
+ void __percpu __iomem **percpu_base;
+};
-/* Address of GIC 0 CPU interface */
-void __iomem *gic_cpu_base_addr __read_mostly;
+struct gic_chip_data {
+ unsigned int irq_offset;
+ union gic_base dist_base;
+ union gic_base cpu_base;
+#ifdef CONFIG_CPU_PM
+ u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+ u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+ u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_conf;
+#endif
+#ifdef CONFIG_IRQ_DOMAIN
+ struct irq_domain domain;
+#endif
+ unsigned int gic_irqs;
+#ifdef CONFIG_GIC_NON_BANKED
+ void __iomem *(*get_base)(union gic_base *);
+#endif
+};
+
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
/*
* Supported arch specific GIC irq extension.
@@ -67,16 +90,48 @@
static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
+#ifdef CONFIG_GIC_NON_BANKED
+static void __iomem *gic_get_percpu_base(union gic_base *base)
+{
+ return *__this_cpu_ptr(base->percpu_base);
+}
+
+static void __iomem *gic_get_common_base(union gic_base *base)
+{
+ return base->common_base;
+}
+
+static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
+{
+ return data->get_base(&data->dist_base);
+}
+
+static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
+{
+ return data->get_base(&data->cpu_base);
+}
+
+static inline void gic_set_base_accessor(struct gic_chip_data *data,
+ void __iomem *(*f)(union gic_base *))
+{
+ data->get_base = f;
+}
+#else
+#define gic_data_dist_base(d) ((d)->dist_base.common_base)
+#define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
+#define gic_set_base_accessor(d,f)
+#endif
+
static inline void __iomem *gic_dist_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
- return gic_data->dist_base;
+ return gic_data_dist_base(gic_data);
}
static inline void __iomem *gic_cpu_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
- return gic_data->cpu_base;
+ return gic_data_cpu_base(gic_data);
}
static inline unsigned int gic_irq(struct irq_data *d)
@@ -215,6 +270,32 @@
#define gic_set_wake NULL
#endif
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+ u32 irqstat, irqnr;
+ struct gic_chip_data *gic = &gic_data[0];
+ void __iomem *cpu_base = gic_data_cpu_base(gic);
+
+ do {
+ irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
+ irqnr = irqstat & ~0x1c00;
+
+ if (likely(irqnr > 15 && irqnr < 1021)) {
+ irqnr = irq_domain_to_irq(&gic->domain, irqnr);
+ handle_IRQ(irqnr, regs);
+ continue;
+ }
+ if (irqnr < 16) {
+ writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+#ifdef CONFIG_SMP
+ handle_IPI(irqnr, regs);
+#endif
+ continue;
+ }
+ break;
+ } while (1);
+}
+
static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
{
struct gic_chip_data *chip_data = irq_get_handler_data(irq);
@@ -225,7 +306,7 @@
chained_irq_enter(chip, desc);
raw_spin_lock(&irq_controller_lock);
- status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK);
+ status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
raw_spin_unlock(&irq_controller_lock);
gic_irq = (status & 0x3ff);
@@ -270,7 +351,7 @@
u32 cpumask;
unsigned int gic_irqs = gic->gic_irqs;
struct irq_domain *domain = &gic->domain;
- void __iomem *base = gic->dist_base;
+ void __iomem *base = gic_data_dist_base(gic);
u32 cpu = 0;
#ifdef CONFIG_SMP
@@ -330,8 +411,8 @@
static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
{
- void __iomem *dist_base = gic->dist_base;
- void __iomem *base = gic->cpu_base;
+ void __iomem *dist_base = gic_data_dist_base(gic);
+ void __iomem *base = gic_data_cpu_base(gic);
int i;
/*
@@ -368,7 +449,7 @@
BUG();
gic_irqs = gic_data[gic_nr].gic_irqs;
- dist_base = gic_data[gic_nr].dist_base;
+ dist_base = gic_data_dist_base(&gic_data[gic_nr]);
if (!dist_base)
return;
@@ -403,7 +484,7 @@
BUG();
gic_irqs = gic_data[gic_nr].gic_irqs;
- dist_base = gic_data[gic_nr].dist_base;
+ dist_base = gic_data_dist_base(&gic_data[gic_nr]);
if (!dist_base)
return;
@@ -439,8 +520,8 @@
if (gic_nr >= MAX_GIC_NR)
BUG();
- dist_base = gic_data[gic_nr].dist_base;
- cpu_base = gic_data[gic_nr].cpu_base;
+ dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+ cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
if (!dist_base || !cpu_base)
return;
@@ -465,8 +546,8 @@
if (gic_nr >= MAX_GIC_NR)
BUG();
- dist_base = gic_data[gic_nr].dist_base;
- cpu_base = gic_data[gic_nr].cpu_base;
+ dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+ cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
if (!dist_base || !cpu_base)
return;
@@ -491,6 +572,11 @@
int i;
for (i = 0; i < MAX_GIC_NR; i++) {
+#ifdef CONFIG_GIC_NON_BANKED
+ /* Skip over unused GICs */
+ if (!gic_data[i].get_base)
+ continue;
+#endif
switch (cmd) {
case CPU_PM_ENTER:
gic_cpu_save(i);
@@ -526,7 +612,8 @@
sizeof(u32));
BUG_ON(!gic->saved_ppi_conf);
- cpu_pm_register_notifier(&gic_notifier_block);
+ if (gic == &gic_data[0])
+ cpu_pm_register_notifier(&gic_notifier_block);
}
#else
static void __init gic_pm_init(struct gic_chip_data *gic)
@@ -563,8 +650,9 @@
#endif
};
-void __init gic_init(unsigned int gic_nr, int irq_start,
- void __iomem *dist_base, void __iomem *cpu_base)
+void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+ void __iomem *dist_base, void __iomem *cpu_base,
+ u32 percpu_offset)
{
struct gic_chip_data *gic;
struct irq_domain *domain;
@@ -574,26 +662,55 @@
gic = &gic_data[gic_nr];
domain = &gic->domain;
- gic->dist_base = dist_base;
- gic->cpu_base = cpu_base;
+#ifdef CONFIG_GIC_NON_BANKED
+ if (percpu_offset) { /* Frankein-GIC without banked registers... */
+ unsigned int cpu;
+
+ gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
+ gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
+ if (WARN_ON(!gic->dist_base.percpu_base ||
+ !gic->cpu_base.percpu_base)) {
+ free_percpu(gic->dist_base.percpu_base);
+ free_percpu(gic->cpu_base.percpu_base);
+ return;
+ }
+
+ for_each_possible_cpu(cpu) {
+ unsigned long offset = percpu_offset * cpu_logical_map(cpu);
+ *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
+ *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
+ }
+
+ gic_set_base_accessor(gic, gic_get_percpu_base);
+ } else
+#endif
+ { /* Normal, sane GIC... */
+ WARN(percpu_offset,
+ "GIC_NON_BANKED not enabled, ignoring %08x offset!",
+ percpu_offset);
+ gic->dist_base.common_base = dist_base;
+ gic->cpu_base.common_base = cpu_base;
+ gic_set_base_accessor(gic, gic_get_common_base);
+ }
/*
* For primary GICs, skip over SGIs.
* For secondary GICs, skip over PPIs, too.
*/
+ domain->hwirq_base = 32;
if (gic_nr == 0) {
- gic_cpu_base_addr = cpu_base;
- domain->hwirq_base = 16;
- if (irq_start > 0)
- irq_start = (irq_start & ~31) + 16;
- } else
- domain->hwirq_base = 32;
+ if ((irq_start & 31) > 0) {
+ domain->hwirq_base = 16;
+ if (irq_start != -1)
+ irq_start = (irq_start & ~31) + 16;
+ }
+ }
/*
* Find out how many interrupts are supported.
* The GIC only supports up to 1020 interrupt sources.
*/
- gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
gic_irqs = (gic_irqs + 1) * 32;
if (gic_irqs > 1020)
gic_irqs = 1020;
@@ -641,7 +758,7 @@
dsb();
/* this always happens on GIC0 */
- writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
+ writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
}
#endif
@@ -652,6 +769,7 @@
{
void __iomem *cpu_base;
void __iomem *dist_base;
+ u32 percpu_offset;
int irq;
struct irq_domain *domain = &gic_data[gic_cnt].domain;
@@ -664,9 +782,12 @@
cpu_base = of_iomap(node, 1);
WARN(!cpu_base, "unable to map gic cpu registers\n");
+ if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
+ percpu_offset = 0;
+
domain->of_node = of_node_get(node);
- gic_init(gic_cnt, -1, dist_base, cpu_base);
+ gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset);
if (parent) {
irq = irq_of_parse_and_map(node, 0);
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 7129cfb..d8e44a4 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -221,17 +221,6 @@
*/
#define MCODE_BUFF_PER_REQ 256
-/*
- * Mark a _pl330_req as free.
- * We do it by writing DMAEND as the first instruction
- * because no valid request is going to have DMAEND as
- * its first instruction to execute.
- */
-#define MARK_FREE(req) do { \
- _emit_END(0, (req)->mc_cpu); \
- (req)->mc_len = 0; \
- } while (0)
-
/* If the _pl330_req is available to the client */
#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
@@ -301,8 +290,10 @@
struct pl330_dmac *dmac;
/* Only two at a time */
struct _pl330_req req[2];
- /* Index of the last submitted request */
+ /* Index of the last enqueued request */
unsigned lstenq;
+ /* Index of the last submitted request or -1 if the DMA is stopped */
+ int req_running;
};
enum pl330_dmac_state {
@@ -778,6 +769,22 @@
writel(0, regs + DBGCMD);
}
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+static void mark_free(struct pl330_thread *thrd, int idx)
+{
+ struct _pl330_req *req = &thrd->req[idx];
+
+ _emit_END(0, req->mc_cpu);
+ req->mc_len = 0;
+
+ thrd->req_running = -1;
+}
+
static inline u32 _state(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
@@ -836,31 +843,6 @@
}
}
-/* If the request 'req' of thread 'thrd' is currently active */
-static inline bool _req_active(struct pl330_thread *thrd,
- struct _pl330_req *req)
-{
- void __iomem *regs = thrd->dmac->pinfo->base;
- u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
-
- if (IS_FREE(req))
- return false;
-
- return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
-}
-
-/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
-static inline unsigned _thrd_active(struct pl330_thread *thrd)
-{
- if (_req_active(thrd, &thrd->req[0]))
- return 1; /* First req active */
-
- if (_req_active(thrd, &thrd->req[1]))
- return 2; /* Second req active */
-
- return 0;
-}
-
static void _stop(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
@@ -892,17 +874,22 @@
struct _arg_GO go;
unsigned ns;
u8 insn[6] = {0, 0, 0, 0, 0, 0};
+ int idx;
/* Return if already ACTIVE */
if (_state(thrd) != PL330_STATE_STOPPED)
return true;
- if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
- req = &thrd->req[1 - thrd->lstenq];
- else if (!IS_FREE(&thrd->req[thrd->lstenq]))
- req = &thrd->req[thrd->lstenq];
- else
- req = NULL;
+ idx = 1 - thrd->lstenq;
+ if (!IS_FREE(&thrd->req[idx]))
+ req = &thrd->req[idx];
+ else {
+ idx = thrd->lstenq;
+ if (!IS_FREE(&thrd->req[idx]))
+ req = &thrd->req[idx];
+ else
+ req = NULL;
+ }
/* Return if no request */
if (!req || !req->r)
@@ -933,6 +920,8 @@
/* Only manager can execute GO */
_execute_DBGINSN(thrd, insn, true);
+ thrd->req_running = idx;
+
return true;
}
@@ -1211,8 +1200,8 @@
ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
- ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
- ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+ ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+ ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
ccr |= (rqc->swap << CC_SWAP_SHFT);
@@ -1382,8 +1371,8 @@
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[0]);
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 0);
+ mark_free(thrd, 1);
/* Clear the reset flag */
pl330->dmac_tbd.reset_chan &= ~(1 << i);
@@ -1461,14 +1450,12 @@
thrd = &pl330->channels[id];
- active = _thrd_active(thrd);
- if (!active) /* Aborted */
+ active = thrd->req_running;
+ if (active == -1) /* Aborted */
continue;
- active -= 1;
-
rqdone = &thrd->req[active];
- MARK_FREE(rqdone);
+ mark_free(thrd, active);
/* Get going again ASAP */
_start(thrd);
@@ -1480,13 +1467,19 @@
/* Now that we are in no hurry, do the callbacks */
while (!list_empty(&pl330->req_done)) {
+ struct pl330_req *r;
+
rqdone = container_of(pl330->req_done.next,
struct _pl330_req, rqd);
list_del_init(&rqdone->rqd);
+ /* Detach the req */
+ r = rqdone->r;
+ rqdone->r = NULL;
+
spin_unlock_irqrestore(&pl330->lock, flags);
- _callback(rqdone->r, PL330_ERR_NONE);
+ _callback(r, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
@@ -1509,7 +1502,7 @@
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
- int ret = 0, active;
+ int ret = 0, active = thrd->req_running;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
@@ -1525,28 +1518,24 @@
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[0]);
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 0);
+ mark_free(thrd, 1);
break;
case PL330_OP_ABORT:
- active = _thrd_active(thrd);
-
/* Make sure the channel is stopped */
_stop(thrd);
/* ABORT is only for the active req */
- if (!active)
+ if (active == -1)
break;
- active--;
-
thrd->req[active].r = NULL;
- MARK_FREE(&thrd->req[active]);
+ mark_free(thrd, active);
/* Start the next */
case PL330_OP_START:
- if (!_thrd_active(thrd) && !_start(thrd))
+ if ((active == -1) && !_start(thrd))
ret = -EIO;
break;
@@ -1587,14 +1576,13 @@
else
pstatus->faulting = false;
- active = _thrd_active(thrd);
+ active = thrd->req_running;
- if (!active) {
+ if (active == -1) {
/* Indicate that the thread is not running */
pstatus->top_req = NULL;
pstatus->wait_req = NULL;
} else {
- active--;
pstatus->top_req = thrd->req[active].r;
pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
? thrd->req[1 - active].r : NULL;
@@ -1623,6 +1611,11 @@
return -1;
}
+static bool _chan_ns(const struct pl330_info *pi, int i)
+{
+ return pi->pcfg.irq_ns & (1 << i);
+}
+
/* Upon success, returns IdentityToken for the
* allocated channel, NULL otherwise.
*/
@@ -1647,15 +1640,16 @@
for (i = 0; i < chans; i++) {
thrd = &pl330->channels[i];
- if (thrd->free) {
+ if ((thrd->free) && (!_manager_ns(thrd) ||
+ _chan_ns(pi, i))) {
thrd->ev = _alloc_event(thrd);
if (thrd->ev >= 0) {
thrd->free = false;
thrd->lstenq = 1;
thrd->req[0].r = NULL;
- MARK_FREE(&thrd->req[0]);
+ mark_free(thrd, 0);
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 1);
break;
}
}
@@ -1761,14 +1755,14 @@
thrd->req[0].mc_bus = pl330->mcode_bus
+ (thrd->id * pi->mcbufsz);
thrd->req[0].r = NULL;
- MARK_FREE(&thrd->req[0]);
+ mark_free(thrd, 0);
thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+ pi->mcbufsz / 2;
thrd->req[1].mc_bus = thrd->req[0].mc_bus
+ pi->mcbufsz / 2;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 1);
}
static int dmac_alloc_threads(struct pl330_dmac *pl330)
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 2393b5b..8794a34 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -143,7 +143,6 @@
}
static struct clock_event_device sp804_clockevent = {
- .shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sp804_set_mode,
.set_next_event = sp804_set_next_event,
@@ -169,13 +168,9 @@
clkevt_base = base;
clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
-
evt->name = name;
evt->irq = irq;
- evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
- evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
- evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
setup_irq(irq, &sp804_timer_irq);
- clockevents_register_device(evt);
+ clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 01f18a4..dcb004a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -19,17 +19,22 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/syscore_ops.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-#ifdef CONFIG_PM
/**
* struct vic_device - VIC PM device
* @irq: The IRQ number for the base of the VIC.
@@ -40,6 +45,7 @@
* @int_enable: Save for VIC_INT_ENABLE.
* @soft_int: Save for VIC_INT_SOFT.
* @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
*/
struct vic_device {
void __iomem *base;
@@ -50,13 +56,13 @@
u32 int_enable;
u32 soft_int;
u32 protect;
+ struct irq_domain domain;
};
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static int vic_id;
-#endif /* CONFIG_PM */
/**
* vic_init2 - common initialisation code
@@ -156,39 +162,50 @@
return 0;
}
late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
/**
- * vic_pm_register - Register a VIC for later power management control
+ * vic_register() - Register a VIC.
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
*/
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+static void __init vic_register(void __iomem *base, unsigned int irq,
+ u32 resume_sources, struct device_node *node)
{
struct vic_device *v;
- if (vic_id >= ARRAY_SIZE(vic_devices))
+ if (vic_id >= ARRAY_SIZE(vic_devices)) {
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
- else {
- v = &vic_devices[vic_id];
- v->base = base;
- v->resume_sources = resume_sources;
- v->irq = irq;
- vic_id++;
+ return;
}
+
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+
+ v->domain.irq_base = irq;
+ v->domain.nr_irq = 32;
+#ifdef CONFIG_OF_IRQ
+ v->domain.of_node = of_node_get(node);
+#endif /* CONFIG_OF */
+ v->domain.ops = &irq_domain_simple_ops;
+ irq_domain_add(&v->domain);
}
-#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-#endif /* CONFIG_PM */
static void vic_ack_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
/* moreover, clear the soft-triggered, in case it was the reason */
writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
@@ -197,14 +214,14 @@
static void vic_mask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE);
}
@@ -226,7 +243,7 @@
static int vic_set_wake(struct irq_data *d, unsigned int on)
{
struct vic_device *v = vic_from_irq(d->irq);
- unsigned int off = d->irq & 31;
+ unsigned int off = d->hwirq;
u32 bit = 1 << off;
if (!v)
@@ -301,7 +318,7 @@
* and 020 within the page. We call this "second block".
*/
static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
- u32 vic_sources)
+ u32 vic_sources, struct device_node *node)
{
unsigned int i;
int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
@@ -328,17 +345,12 @@
}
vic_set_irq_sources(base, irq_start, vic_sources);
+ vic_register(base, irq_start, 0, node);
}
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources, u32 resume_sources)
+static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources,
+ struct device_node *node)
{
unsigned int i;
u32 cellid = 0;
@@ -356,7 +368,7 @@
switch(vendor) {
case AMBA_VENDOR_ST:
- vic_init_st(base, irq_start, vic_sources);
+ vic_init_st(base, irq_start, vic_sources, node);
return;
default:
printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
@@ -375,5 +387,81 @@
vic_set_irq_sources(base, irq_start, vic_sources);
- vic_pm_register(base, irq_start, resume_sources);
+ vic_register(base, irq_start, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources)
+{
+ __vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+ void __iomem *regs;
+ int irq_base;
+
+ if (WARN(parent, "non-root VICs are not supported"))
+ return -EINVAL;
+
+ regs = of_iomap(node, 0);
+ if (WARN_ON(!regs))
+ return -EIO;
+
+ irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+ if (WARN_ON(irq_base < 0))
+ goto out_unmap;
+
+ __vic_init(regs, irq_base, ~0, ~0, node);
+
+ return 0;
+
+ out_unmap:
+ iounmap(regs);
+
+ return -EIO;
+}
+#endif /* CONFIG OF */
+
+/*
+ * Handle each interrupt in a single VIC. Returns non-zero if we've
+ * handled at least one interrupt. This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+ u32 stat, irq;
+ int handled = 0;
+
+ stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
+ while (stat) {
+ irq = ffs(stat) - 1;
+ handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+ stat &= ~(1 << irq);
+ handled = 1;
+ }
+
+ return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+ int i, handled;
+
+ do {
+ for (i = 0, handled = 0; i < vic_id; ++i)
+ handled |= handle_one_vic(&vic_devices[i], regs);
+ } while (handled);
}
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9_defconfig
similarity index 93%
rename from arch/arm/configs/at91cap9adk_defconfig
rename to arch/arm/configs/at91cap9_defconfig
index ffb1edd..8826eb2 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9_defconfig
@@ -38,7 +38,6 @@
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -52,16 +51,12 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
@@ -81,7 +76,6 @@
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
@@ -99,7 +93,6 @@
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index 38cb7c9..bbe4e1a 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -5,7 +5,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
@@ -56,7 +55,6 @@
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@@ -75,18 +73,8 @@
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
@@ -108,8 +96,6 @@
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
@@ -119,14 +105,23 @@
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_TUN=m
+CONFIG_ARM_AT91_ETHER=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
@@ -139,18 +134,6 @@
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
@@ -158,9 +141,9 @@
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_LEGACY_PTY_COUNT=32
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -290,7 +273,6 @@
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
@@ -335,7 +317,6 @@
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260_defconfig
similarity index 86%
rename from arch/arm/configs/at91sam9260ek_defconfig
rename to arch/arm/configs/at91sam9260_defconfig
index f8a9226..505b376 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260_defconfig
@@ -12,11 +12,23 @@
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
@@ -33,12 +45,10 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -55,7 +65,6 @@
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
@@ -71,7 +80,6 @@
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20_defconfig
similarity index 90%
rename from arch/arm/configs/at91sam9g20ek_defconfig
rename to arch/arm/configs/at91sam9g20_defconfig
index 9e90e6d..9123568 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -14,6 +14,15 @@
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_AT91SAM9G20EK=y
CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+CONFIG_MACH_CPU9G20=y
+CONFIG_MACH_ACMENETUSFOXG20=y
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+CONFIG_MACH_PCONTROL_G20=y
+CONFIG_MACH_GSIA18S=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
@@ -21,9 +30,10 @@
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -37,8 +47,6 @@
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -48,17 +56,13 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
@@ -66,15 +70,14 @@
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
CONFIG_HW_RANDOM=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
@@ -82,7 +85,6 @@
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_AT73C213=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
@@ -105,7 +107,6 @@
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index c5876d2..606d48f 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -18,6 +18,7 @@
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
@@ -73,11 +74,8 @@
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_DAVICOM_PHY=y
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AT76C50X_USB=m
@@ -131,7 +129,6 @@
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_FB_UDL=m
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rl_defconfig
similarity index 94%
rename from arch/arm/configs/at91sam9rlek_defconfig
rename to arch/arm/configs/at91sam9rl_defconfig
index 75621e4..ad562ee 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -23,8 +23,6 @@
CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -35,7 +33,6 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
@@ -62,13 +59,11 @@
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 227a477..d95763d 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -287,7 +287,7 @@
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 176ec22..fd996bb 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -263,7 +263,7 @@
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 11a4192..cf497ce 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -18,9 +18,10 @@
CONFIG_ARCH_IMX_V4_V5=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
@@ -72,17 +73,16 @@
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
CONFIG_DM9000=y
+CONFIG_SMC91X=y
CONFIG_SMC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
@@ -100,6 +100,7 @@
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
@@ -139,6 +140,7 @@
CONFIG_MMC_MXC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index a88e64d..443675d 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -132,7 +132,7 @@
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_GADGETFS=m
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7b63462..945a34f 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -48,13 +48,7 @@
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-CONFIG_OMAP_ARM_216MHZ=y
-CONFIG_OMAP_ARM_195MHZ=y
-CONFIG_OMAP_ARM_192MHZ=y
CONFIG_OMAP_ARM_182MHZ=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_OMAP_CF=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 4a5a126..374000e 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -14,8 +14,6 @@
CONFIG_ARCH_U300=y
CONFIG_MACH_U300=y
CONFIG_MACH_U300_BS335=y
-CONFIG_MACH_U300_DUAL_RAM=y
-CONFIG_U300_DEBUG=y
CONFIG_MACH_U300_SPIDUMMY=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -26,19 +24,21 @@
CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_HWMON is not set
@@ -51,6 +51,7 @@
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
CONFIG_MMC_ARMMMCI=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
@@ -65,10 +66,8 @@
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 97d31a4..2d7b6e7 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -10,7 +10,7 @@
CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
-CONFIG_MACH_U8500=y
+CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
CONFIG_NO_HZ=y
@@ -24,6 +24,7 @@
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_VFP=y
CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -41,11 +42,8 @@
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
@@ -72,15 +70,12 @@
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
-# CONFIG_HWMON is not set
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
+CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_GADGET=y
CONFIG_AB8500_USB=y
CONFIG_MMC=y
@@ -97,6 +92,7 @@
CONFIG_STE_DMA40=y
CONFIG_STAGING=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
+CONFIG_HSEM_U8500=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 59577ad..547a3c1 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -140,7 +140,7 @@
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 29035e8..b6e65de 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -187,6 +187,17 @@
#endif
/*
+ * Instruction barrier
+ */
+ .macro instr_sync
+#if __LINUX_ARM_ARCH__ >= 7
+ isb
+#elif __LINUX_ARM_ARCH__ == 6
+ mcr p15, 0, r0, c7, c5, 4
+#endif
+ .endm
+
+/*
* SMP data memory barrier
*/
.macro smp_dmb mode
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 9abe7a0..fac79dc 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -32,7 +32,6 @@
#define __BUG(__file, __line, __value) \
do { \
- BUILD_BUG_ON(sizeof(struct bug_entry) != 12); \
asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n" \
".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
"2:\t.asciz " #__file "\n" \
diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h
new file mode 100644
index 0000000..a0ada3e
--- /dev/null
+++ b/arch/arm/include/asm/cti.h
@@ -0,0 +1,179 @@
+#ifndef __ASMARM_CTI_H
+#define __ASMARM_CTI_H
+
+#include <asm/io.h>
+
+/* The registers' definition is from section 3.2 of
+ * Embedded Cross Trigger Revision: r0p0
+ */
+#define CTICONTROL 0x000
+#define CTISTATUS 0x004
+#define CTILOCK 0x008
+#define CTIPROTECTION 0x00C
+#define CTIINTACK 0x010
+#define CTIAPPSET 0x014
+#define CTIAPPCLEAR 0x018
+#define CTIAPPPULSE 0x01c
+#define CTIINEN 0x020
+#define CTIOUTEN 0x0A0
+#define CTITRIGINSTATUS 0x130
+#define CTITRIGOUTSTATUS 0x134
+#define CTICHINSTATUS 0x138
+#define CTICHOUTSTATUS 0x13c
+#define CTIPERIPHID0 0xFE0
+#define CTIPERIPHID1 0xFE4
+#define CTIPERIPHID2 0xFE8
+#define CTIPERIPHID3 0xFEC
+#define CTIPCELLID0 0xFF0
+#define CTIPCELLID1 0xFF4
+#define CTIPCELLID2 0xFF8
+#define CTIPCELLID3 0xFFC
+
+/* The below are from section 3.6.4 of
+ * CoreSight v1.0 Architecture Specification
+ */
+#define LOCKACCESS 0xFB0
+#define LOCKSTATUS 0xFB4
+
+/* write this value to LOCKACCESS will unlock the module, and
+ * other value will lock the module
+ */
+#define LOCKCODE 0xC5ACCE55
+
+/**
+ * struct cti - cross trigger interface struct
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out_for_irq: triger out number which will cause
+ * the @irq happen
+ *
+ * cti struct used to operate cti registers.
+ */
+struct cti {
+ void __iomem *base;
+ int irq;
+ int trig_out_for_irq;
+};
+
+/**
+ * cti_init - initialize the cti instance
+ * @cti: cti instance
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out: triger out number which will cause
+ * the @irq happen
+ *
+ * called by machine code to pass the board dependent
+ * @base, @irq and @trig_out to cti.
+ */
+static inline void cti_init(struct cti *cti,
+ void __iomem *base, int irq, int trig_out)
+{
+ cti->base = base;
+ cti->irq = irq;
+ cti->trig_out_for_irq = trig_out;
+}
+
+/**
+ * cti_map_trigger - use the @chan to map @trig_in to @trig_out
+ * @cti: cti instance
+ * @trig_in: trigger in number
+ * @trig_out: trigger out number
+ * @channel: channel number
+ *
+ * This function maps one trigger in of @trig_in to one trigger
+ * out of @trig_out using the channel @chan.
+ */
+static inline void cti_map_trigger(struct cti *cti,
+ int trig_in, int trig_out, int chan)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + CTIINEN + trig_in * 4);
+ val |= BIT(chan);
+ __raw_writel(val, base + CTIINEN + trig_in * 4);
+
+ val = __raw_readl(base + CTIOUTEN + trig_out * 4);
+ val |= BIT(chan);
+ __raw_writel(val, base + CTIOUTEN + trig_out * 4);
+}
+
+/**
+ * cti_enable - enable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_enable(struct cti *cti)
+{
+ __raw_writel(0x1, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_disable - disable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_disable(struct cti *cti)
+{
+ __raw_writel(0, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_irq_ack - clear the cti irq
+ * @cti: cti instance
+ *
+ * clear the cti irq
+ */
+static inline void cti_irq_ack(struct cti *cti)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + CTIINTACK);
+ val |= BIT(cti->trig_out_for_irq);
+ __raw_writel(val, base + CTIINTACK);
+}
+
+/**
+ * cti_unlock - unlock cti module
+ * @cti: cti instance
+ *
+ * unlock the cti module, or else any writes to the cti
+ * module is not allowed.
+ */
+static inline void cti_unlock(struct cti *cti)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + LOCKSTATUS);
+
+ if (val & 1) {
+ val = LOCKCODE;
+ __raw_writel(val, base + LOCKACCESS);
+ }
+}
+
+/**
+ * cti_lock - lock cti module
+ * @cti: cti instance
+ *
+ * lock the cti module, so any writes to the cti
+ * module will be not allowed.
+ */
+static inline void cti_lock(struct cti *cti)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + LOCKSTATUS);
+
+ if (!(val & 1)) {
+ val = ~LOCKCODE;
+ __raw_writel(val, base + LOCKACCESS);
+ }
+}
+#endif
diff --git a/arch/arm/include/asm/edac.h b/arch/arm/include/asm/edac.h
new file mode 100644
index 0000000..0df7a2c
--- /dev/null
+++ b/arch/arm/include/asm/edac.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ * Based on PPC version Copyright 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+/*
+ * ECC atomic, DMA, SMP and interrupt safe scrub function.
+ * Implements the per arch atomic_scrub() that EDAC use for software
+ * ECC scrubbing. It reads memory and then writes back the original
+ * value, allowing the hardware to detect and correct memory errors.
+ */
+static inline void atomic_scrub(void *va, u32 size)
+{
+#if __LINUX_ARM_ARCH__ >= 6
+ unsigned int *virt_addr = va;
+ unsigned int temp, temp2;
+ unsigned int i;
+
+ for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
+ /* Very carefully read and write to memory atomically
+ * so we are interrupt, DMA and SMP safe.
+ */
+ __asm__ __volatile__("\n"
+ "1: ldrex %0, [%2]\n"
+ " strex %1, %0, [%2]\n"
+ " teq %1, #0\n"
+ " bne 1b\n"
+ : "=&r"(temp), "=&r"(temp2)
+ : "r"(virt_addr)
+ : "cc");
+ }
+#endif
+}
+
+#endif
diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S
deleted file mode 100644
index 3ceb85e..0000000
--- a/arch/arm/include/asm/entry-macro-vic2.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* arch/arm/include/asm/entry-macro-vic2.S
- *
- * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for a device with two VICs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* This should be included from <mach/entry-macro.S> with the necessary
- * defines for virtual addresses and IRQ bases for the two vics.
- *
- * The code needs the following defined:
- * IRQ_VIC0_BASE IRQ number of VIC0's first IRQ
- * IRQ_VIC1_BASE IRQ number of VIC1's first IRQ
- * VA_VIC0 Virtual address of VIC0
- * VA_VIC1 Virtual address of VIC1
- *
- * Note, code assumes VIC0's virtual address is an ARM immediate constant
- * away from VIC1.
-*/
-
-#include <asm/hardware/vic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =VA_VIC0
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, #IRQ_VIC0_BASE + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
- addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 11ad0bf..7151753b 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -1,6 +1,10 @@
#ifndef _ARCH_ARM_GPIO_H
#define _ARCH_ARM_GPIO_H
+#if CONFIG_ARCH_NR_GPIO > 0
+#define ARCH_NR_GPIO CONFIG_ARCH_NR_GPIO
+#endif
+
/* not all ARM platforms necessarily support this API ... */
#include <mach/gpio.h>
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index ddf07a9..436e60b 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -27,23 +27,6 @@
#define arch_irq_stat_cpu smp_irq_stat_cpu
-#if NR_IRQS > 512
-#define HARDIRQ_BITS 10
-#elif NR_IRQS > 256
-#define HARDIRQ_BITS 9
-#else
-#define HARDIRQ_BITS 8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have space
- * for potentially all IRQ sources in the system nesting
- * on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1
#endif /* __ASM_HARDIRQ_H */
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
deleted file mode 100644
index 74ebc80..0000000
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/entry-macro-gic.S
- *
- * Low-level IRQ helper macros for GIC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/gic.h>
-
-#ifndef HAVE_GET_IRQNR_PREAMBLE
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-#endif
-
-/*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK]
- /* bits 12-10 = src CPU, 9-0 = int # */
-
- ldr \tmp, =1021
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
- .endm
-
-/* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 3e91f22..4bdfe00 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -36,30 +36,22 @@
#include <linux/irqdomain.h>
struct device_node;
-extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
-void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
+ u32 offset);
int gic_of_init(struct device_node *node, struct device_node *parent);
void gic_secondary_init(unsigned int);
+void gic_handle_irq(struct pt_regs *regs);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-struct gic_chip_data {
- void __iomem *dist_base;
- void __iomem *cpu_base;
-#ifdef CONFIG_CPU_PM
- u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
- u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
- u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
- u32 __percpu *saved_ppi_enable;
- u32 __percpu *saved_ppi_conf;
-#endif
-#ifdef CONFIG_IRQ_DOMAIN
- struct irq_domain domain;
-#endif
- unsigned int gic_irqs;
-};
+static inline void gic_init(unsigned int nr, int start,
+ void __iomem *dist , void __iomem *cpu)
+{
+ gic_init_bases(nr, start, dist, cpu, 0);
+}
+
#endif
#endif
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 5daea29..077c323 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -234,6 +234,7 @@
void iop3xx_map_io(void);
void iop_init_cp6_handler(void);
void iop_init_time(unsigned long tickrate);
+void iop3xx_restart(char, const char *);
static inline u32 read_tmr0(void)
{
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index 5d72550..f42ebd6 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,15 @@
#define VIC_PL192_VECT_ADDR 0xF00
#ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-#endif
+#include <linux/compiler.h>
+#include <linux/types.h>
+struct device_node;
+struct pt_regs;
+
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
+int vic_of_init(struct device_node *node, struct device_node *parent);
+void vic_handle_irq(struct pt_regs *regs);
+
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/include/asm/idmap.h b/arch/arm/include/asm/idmap.h
new file mode 100644
index 0000000..bf863ed
--- /dev/null
+++ b/arch/arm/include/asm/idmap.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_IDMAP_H
+#define __ASM_IDMAP_H
+
+#include <linux/compiler.h>
+#include <asm/pgtable.h>
+
+/* Tag a function as requiring to be executed via an identity mapping. */
+#define __idmap __section(.idmap.text) noinline notrace
+
+extern pgd_t *idmap_pgd;
+
+void setup_mm_for_reboot(void);
+
+#endif /* __ASM_IDMAP_H */
diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h
index 9768397..84c7e51 100644
--- a/arch/arm/include/asm/ipcbuf.h
+++ b/arch/arm/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __ASMARM_IPCBUF_H
-#define __ASMARM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __ASMARM_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 2b0efc3..d7692ca 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -19,7 +19,7 @@
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
unsigned long atag_offset; /* tagged list (relative) */
- const char **dt_compat; /* array of device tree
+ const char *const *dt_compat; /* array of device tree
* 'compatible' strings */
unsigned int nr_irqs; /* number of IRQs */
@@ -31,10 +31,10 @@
unsigned int video_start; /* start of video RAM */
unsigned int video_end; /* end of video RAM */
- unsigned int reserve_lp0 :1; /* never has lp0 */
- unsigned int reserve_lp1 :1; /* never has lp1 */
- unsigned int reserve_lp2 :1; /* never has lp2 */
- unsigned int soft_reboot :1; /* soft reboot */
+ unsigned char reserve_lp0 :1; /* never has lp0 */
+ unsigned char reserve_lp1 :1; /* never has lp1 */
+ unsigned char reserve_lp2 :1; /* never has lp2 */
+ char restart_mode; /* default restart mode */
void (*fixup)(struct tag *, char **,
struct meminfo *);
void (*reserve)(void);/* reserve mem blocks */
@@ -46,6 +46,7 @@
#ifdef CONFIG_MULTI_IRQ_HANDLER
void (*handle_irq)(struct pt_regs *);
#endif
+ void (*restart)(char, const char *);
};
/*
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index d5adaae..f73c908 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -10,8 +10,6 @@
#ifndef __ASM_ARM_MACH_TIME_H
#define __ASM_ARM_MACH_TIME_H
-#include <linux/sysdev.h>
-
/*
* This is our kernel timer structure.
*
diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
new file mode 100644
index 0000000..c0efdd6
--- /dev/null
+++ b/arch/arm/include/asm/opcodes.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/include/asm/opcodes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OPCODES_H
+#define __ASM_ARM_OPCODES_H
+
+#ifndef __ASSEMBLY__
+extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
+#endif
+
+#define ARM_OPCODE_CONDTEST_FAIL 0
+#define ARM_OPCODE_CONDTEST_PASS 1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
+
+#endif /* __ASM_ARM_OPCODES_H */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index ca94653..97b440c 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -151,7 +151,11 @@
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-types.h>
+#else
#include <asm/pgtable-2level-types.h>
+#endif
#endif /* CONFIG_MMU */
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index 0f8e382..99cfe36 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -32,7 +32,4 @@
extern enum arm_perf_pmu_ids
armpmu_get_pmu_id(void);
-extern int
-armpmu_get_max_events(void);
-
#endif /* __ARM_PERF_EVENT_H__ */
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3e08fd3..943504f 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -25,12 +25,34 @@
#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
+#ifdef CONFIG_ARM_LPAE
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+ return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+ BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+ free_page((unsigned long)pmd);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+ set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
+}
+
+#else /* !CONFIG_ARM_LPAE */
+
/*
* Since we have only two-level page tables, these are trivial
*/
#define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); })
#define pmd_free(mm, pmd) do { } while (0)
-#define pgd_populate(mm,pmd,pte) BUG()
+#define pud_populate(mm,pmd,pte) BUG()
+
+#endif /* CONFIG_ARM_LPAE */
extern pgd_t *pgd_alloc(struct mm_struct *mm);
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
@@ -109,7 +131,9 @@
{
pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot;
pmdp[0] = __pmd(pmdval);
+#ifndef CONFIG_ARM_LPAE
pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+#endif
flush_pmd_entry(pmdp);
}
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 470457e..2317a71 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -140,4 +140,45 @@
#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */
#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2)
+#ifndef __ASSEMBLY__
+
+/*
+ * The "pud_xxx()" functions here are trivial when the pmd is folded into
+ * the pud: the pud entry is never bad, always exists, and can't be set or
+ * cleared.
+ */
+#define pud_none(pud) (0)
+#define pud_bad(pud) (0)
+#define pud_present(pud) (1)
+#define pud_clear(pudp) do { } while (0)
+#define set_pud(pud,pudp) do { } while (0)
+
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+ return (pmd_t *)pud;
+}
+
+#define pmd_bad(pmd) (pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps) \
+ do { \
+ pmdpd[0] = pmdps[0]; \
+ pmdpd[1] = pmdps[1]; \
+ flush_pmd_entry(pmdpd); \
+ } while (0)
+
+#define pmd_clear(pmdp) \
+ do { \
+ pmdp[0] = __pmd(0); \
+ pmdp[1] = __pmd(0); \
+ clean_pmd_entry(pmdp); \
+ } while (0)
+
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end) (end)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_PGTABLE_2LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
new file mode 100644
index 0000000..d795282
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/include/asm/pgtable-3level-hwdef.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_HWDEF_H
+#define _ASM_PGTABLE_3LEVEL_HWDEF_H
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1/2 descriptor
+ * - common
+ */
+#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0)
+#define PMD_TYPE_TABLE (_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0)
+#define PMD_BIT4 (_AT(pmdval_t, 0))
+#define PMD_DOMAIN(x) (_AT(pmdval_t, 0))
+
+/*
+ * - section
+ */
+#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3)
+#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
+#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10)
+#define PMD_SECT_nG (_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_XN (_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 0))
+#define PMD_SECT_AP_READ (_AT(pmdval_t, 0))
+#define PMD_SECT_TEX(x) (_AT(pmdval_t, 0))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_SECT_UNCACHED (_AT(pmdval_t, 0) << 2) /* strongly ordered */
+#define PMD_SECT_BUFFERED (_AT(pmdval_t, 1) << 2) /* normal non-cacheable */
+#define PMD_SECT_WT (_AT(pmdval_t, 2) << 2) /* normal inner write-through */
+#define PMD_SECT_WB (_AT(pmdval_t, 3) << 2) /* normal inner write-back */
+#define PMD_SECT_WBWA (_AT(pmdval_t, 7) << 2) /* normal inner write-alloc */
+
+/*
+ * + Level 3 descriptor (PTE)
+ */
+#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0)
+#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0)
+#define PTE_TYPE_PAGE (_AT(pteval_t, 3) << 0)
+#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */
+#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */
+#define PTE_EXT_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */
+#define PTE_EXT_AF (_AT(pteval_t, 1) << 10) /* Access Flag */
+#define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* nG */
+#define PTE_EXT_XN (_AT(pteval_t, 1) << 54) /* XN */
+
+/*
+ * 40-bit physical address supported.
+ */
+#define PHYS_MASK_SHIFT (40)
+#define PHYS_MASK ((1ULL << PHYS_MASK_SHIFT) - 1)
+
+#endif
diff --git a/arch/arm/include/asm/pgtable-3level-types.h b/arch/arm/include/asm/pgtable-3level-types.h
new file mode 100644
index 0000000..921aa30
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level-types.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/include/asm/pgtable-3level-types.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_TYPES_H
+#define _ASM_PGTABLE_3LEVEL_TYPES_H
+
+#include <asm/types.h>
+
+typedef u64 pteval_t;
+typedef u64 pmdval_t;
+typedef u64 pgdval_t;
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pteval_t pte; } pte_t;
+typedef struct { pmdval_t pmd; } pmd_t;
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pteval_t pgprot; } pgprot_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((x).pmd)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+
+typedef pteval_t pte_t;
+typedef pmdval_t pmd_t;
+typedef pgdval_t pgd_t;
+typedef pteval_t pgprot_t;
+
+#define pte_val(x) (x)
+#define pmd_val(x) (x)
+#define pgd_val(x) (x)
+#define pgprot_val(x) (x)
+
+#define __pte(x) (x)
+#define __pmd(x) (x)
+#define __pgd(x) (x)
+#define __pgprot(x) (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+#endif /* _ASM_PGTABLE_3LEVEL_TYPES_H */
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
new file mode 100644
index 0000000..759af70
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/include/asm/pgtable-3level.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_H
+#define _ASM_PGTABLE_3LEVEL_H
+
+/*
+ * With LPAE, there are 3 levels of page tables. Each level has 512 entries of
+ * 8 bytes each, occupying a 4K page. The first level table covers a range of
+ * 512GB, each entry representing 1GB. Since we are limited to 4GB input
+ * address range, only 4 entries in the PGD are used.
+ *
+ * There are enough spare bits in a page table entry for the kernel specific
+ * state.
+ */
+#define PTRS_PER_PTE 512
+#define PTRS_PER_PMD 512
+#define PTRS_PER_PGD 4
+
+#define PTE_HWTABLE_PTRS (PTRS_PER_PTE)
+#define PTE_HWTABLE_OFF (0)
+#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u64))
+
+/*
+ * PGDIR_SHIFT determines the size a top-level page table entry can map.
+ */
+#define PGDIR_SHIFT 30
+
+/*
+ * PMD_SHIFT determines the size a middle-level page table entry can map.
+ */
+#define PMD_SHIFT 21
+
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT 21
+#define SECTION_SIZE (1UL << SECTION_SHIFT)
+#define SECTION_MASK (~(SECTION_SIZE-1))
+
+#define USER_PTRS_PER_PGD (PAGE_OFFSET / PGDIR_SIZE)
+
+/*
+ * "Linux" PTE definitions for LPAE.
+ *
+ * These bits overlap with the hardware bits but the naming is preserved for
+ * consistency with the classic page table format.
+ */
+#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Valid */
+#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */
+#define L_PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */
+#define L_PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */
+#define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */
+#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) /* AP[2] */
+#define L_PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */
+#define L_PTE_YOUNG (_AT(pteval_t, 1) << 10) /* AF */
+#define L_PTE_XN (_AT(pteval_t, 1) << 54) /* XN */
+#define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) /* unused */
+#define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */
+
+/*
+ * To be used in assembly code with the upper page attributes.
+ */
+#define L_PTE_XN_HIGH (1 << (54 - 32))
+#define L_PTE_DIRTY_HIGH (1 << (55 - 32))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0) << 2) /* strongly ordered */
+#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 1) << 2) /* normal non-cacheable */
+#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 2) << 2) /* normal inner write-through */
+#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 3) << 2) /* normal inner write-back */
+#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 7) << 2) /* normal inner write-alloc */
+#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 4) << 2) /* device */
+#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 4) << 2) /* device */
+#define L_PTE_MT_DEV_WC (_AT(pteval_t, 1) << 2) /* normal non-cacheable */
+#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 3) << 2) /* normal inner write-back */
+#define L_PTE_MT_MASK (_AT(pteval_t, 7) << 2)
+
+/*
+ * Software PGD flags.
+ */
+#define L_PGD_SWAPPER (_AT(pgdval_t, 1) << 55) /* swapper_pg_dir entry */
+
+#ifndef __ASSEMBLY__
+
+#define pud_none(pud) (!pud_val(pud))
+#define pud_bad(pud) (!(pud_val(pud) & 2))
+#define pud_present(pud) (pud_val(pud))
+
+#define pud_clear(pudp) \
+ do { \
+ *pudp = __pud(0); \
+ clean_pmd_entry(pudp); \
+ } while (0)
+
+#define set_pud(pudp, pud) \
+ do { \
+ *pudp = pud; \
+ flush_pmd_entry(pudp); \
+ } while (0)
+
+static inline pmd_t *pud_page_vaddr(pud_t pud)
+{
+ return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
+}
+
+/* Find an entry in the second-level page table.. */
+#define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+ return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
+}
+
+#define pmd_bad(pmd) (!(pmd_val(pmd) & 2))
+
+#define copy_pmd(pmdpd,pmdps) \
+ do { \
+ *pmdpd = *pmdps; \
+ flush_pmd_entry(pmdpd); \
+ } while (0)
+
+#define pmd_clear(pmdp) \
+ do { \
+ *pmdp = __pmd(0); \
+ clean_pmd_entry(pmdp); \
+ } while (0)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_3LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h
index 1831111..8426229 100644
--- a/arch/arm/include/asm/pgtable-hwdef.h
+++ b/arch/arm/include/asm/pgtable-hwdef.h
@@ -10,6 +10,10 @@
#ifndef _ASMARM_PGTABLE_HWDEF_H
#define _ASMARM_PGTABLE_HWDEF_H
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-hwdef.h>
+#else
#include <asm/pgtable-2level-hwdef.h>
+#endif
#endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9451dce..f66626d 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -11,20 +11,24 @@
#define _ASMARM_PGTABLE_H
#include <linux/const.h>
-#include <asm-generic/4level-fixup.h>
#include <asm/proc-fns.h>
#ifndef CONFIG_MMU
+#include <asm-generic/4level-fixup.h>
#include "pgtable-nommu.h"
#else
+#include <asm-generic/pgtable-nopud.h>
#include <asm/memory.h>
-#include <mach/vmalloc.h>
#include <asm/pgtable-hwdef.h>
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level.h>
+#else
#include <asm/pgtable-2level.h>
+#endif
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
@@ -33,15 +37,10 @@
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
*/
-#ifndef VMALLOC_START
#define VMALLOC_OFFSET (8*1024*1024)
#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#endif
+#define VMALLOC_END 0xff000000UL
#define LIBRARY_TEXT_START 0x0c000000
@@ -163,39 +162,8 @@
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(addr) pgd_offset(&init_mm, addr)
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_present(pgd) (1)
-#define pgd_clear(pgdp) do { } while (0)
-#define set_pgd(pgd,pgdp) do { } while (0)
-#define set_pud(pud,pudp) do { } while (0)
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(dir, addr) ((pmd_t *)(dir))
-
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd))
-#define pmd_bad(pmd) (pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps) \
- do { \
- pmdpd[0] = pmdps[0]; \
- pmdpd[1] = pmdps[1]; \
- flush_pmd_entry(pmdpd); \
- } while (0)
-
-#define pmd_clear(pmdp) \
- do { \
- pmdp[0] = __pmd(0); \
- pmdp[1] = __pmd(0); \
- clean_pmd_entry(pmdp); \
- } while (0)
static inline pte_t *pmd_page_vaddr(pmd_t pmd)
{
@@ -204,10 +172,6 @@
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
-/* we don't need complex calculations here as the pmd is folded into the pgd */
-#define pmd_addr_end(addr,end) (end)
-
-
#ifndef CONFIG_HIGHPTE
#define __pte_map(pmd) pmd_page_vaddr(*(pmd))
#define __pte_unmap(pte) do { } while (0)
@@ -229,7 +193,6 @@
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
#define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot)
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
#if __LINUX_ARM_ARCH__ < 6
@@ -336,6 +299,7 @@
* We provide our own arch_get_unmapped_area to cope with VIPT caches.
*/
#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
/*
* remap a physical page `pfn' of size `size' with page protection `prot'
@@ -346,9 +310,6 @@
#define pgtable_cache_init() do { } while (0)
-void identity_mapping_add(pgd_t *, unsigned long, unsigned long);
-void identity_mapping_del(pgd_t *, unsigned long, unsigned long);
-
#endif /* !__ASSEMBLY__ */
#endif /* CONFIG_MMU */
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 71d99b8..b5a5be2 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -27,13 +27,22 @@
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
- * @handle_irq: an optional handler which will be called from the interrupt and
- * passed the address of the low level handler, and can be used to implement
- * any platform specific handling before or after calling it.
+ * @handle_irq: an optional handler which will be called from the
+ * interrupt and passed the address of the low level handler,
+ * and can be used to implement any platform specific handling
+ * before or after calling it.
+ * @enable_irq: an optional handler which will be called after
+ * request_irq and be used to handle some platform specific
+ * irq enablement
+ * @disable_irq: an optional handler which will be called before
+ * free_irq and be used to handle some platform specific
+ * irq disablement
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
+ void (*enable_irq)(int irq);
+ void (*disable_irq)(int irq);
};
#ifdef CONFIG_CPU_HAS_PMU
@@ -55,16 +64,6 @@
extern void
release_pmu(enum arm_pmu_type type);
-/**
- * init_pmu() - Initialise the PMU.
- *
- * Initialise the system ready for PMU enabling. This should typically set the
- * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
- * the actual hardware initialisation.
- */
-extern int
-init_pmu(enum arm_pmu_type type);
-
#else /* CONFIG_CPU_HAS_PMU */
#include <linux/err.h>
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 9e92cb2..f3628fb 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -65,7 +65,11 @@
* Set a possibly extended PTE. Non-extended PTEs should
* ignore 'ext'.
*/
+#ifdef CONFIG_ARM_LPAE
+ void (*set_pte_ext)(pte_t *ptep, pte_t pte);
+#else
void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
/* Suspend/resume */
unsigned int suspend_size;
@@ -79,7 +83,11 @@
extern int cpu_do_idle(void);
extern void cpu_dcache_clean_area(void *, int);
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+#ifdef CONFIG_ARM_LPAE
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
+#else
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
/* These three are private to arch/arm/kernel/suspend.c */
@@ -107,6 +115,18 @@
#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
+#ifdef CONFIG_ARM_LPAE
+#define cpu_get_pgd() \
+ ({ \
+ unsigned long pg, pg2; \
+ __asm__("mrrc p15, 0, %0, %1, c2" \
+ : "=r" (pg), "=r" (pg2) \
+ : \
+ : "cc"); \
+ pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1); \
+ (pgd_t *)phys_to_virt(pg); \
+ })
+#else
#define cpu_get_pgd() \
({ \
unsigned long pg; \
@@ -115,6 +135,7 @@
pg &= ~0x3fff; \
(pgd_t *)phys_to_virt(pg); \
})
+#endif
#endif
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index b2d9df5..ce280b8 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -123,6 +123,8 @@
#endif
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
#endif
#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index 6f65ca8..ee03633 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -13,7 +13,6 @@
#ifdef CONFIG_OF
-#include <asm/setup.h>
#include <asm/irq.h>
extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index c8e6ddf..e3f7572 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -8,113 +8,7 @@
#ifndef ASM_SCHED_CLOCK
#define ASM_SCHED_CLOCK
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct clock_data {
- u64 epoch_ns;
- u32 epoch_cyc;
- u32 epoch_cyc_copy;
- u32 mult;
- u32 shift;
-};
-
-#define DEFINE_CLOCK_DATA(name) struct clock_data name
-
-static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
-{
- return (cyc * mult) >> shift;
-}
-
-/*
- * Atomically update the sched_clock epoch. Your update callback will
- * be called from a timer before the counter wraps - read the current
- * counter value, and call this function to safely move the epochs
- * forward. Only use this from the update callback.
- */
-static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask)
-{
- unsigned long flags;
- u64 ns = cd->epoch_ns +
- cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift);
-
- /*
- * Write epoch_cyc and epoch_ns in a way that the update is
- * detectable in cyc_to_fixed_sched_clock().
- */
- raw_local_irq_save(flags);
- cd->epoch_cyc = cyc;
- smp_wmb();
- cd->epoch_ns = ns;
- smp_wmb();
- cd->epoch_cyc_copy = cyc;
- raw_local_irq_restore(flags);
-}
-
-/*
- * If your clock rate is known at compile time, using this will allow
- * you to optimize the mult/shift loads away. This is paired with
- * init_fixed_sched_clock() to ensure that your mult/shift are correct.
- */
-static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd,
- u32 cyc, u32 mask, u32 mult, u32 shift)
-{
- u64 epoch_ns;
- u32 epoch_cyc;
-
- /*
- * Load the epoch_cyc and epoch_ns atomically. We do this by
- * ensuring that we always write epoch_cyc, epoch_ns and
- * epoch_cyc_copy in strict order, and read them in strict order.
- * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
- * the middle of an update, and we should repeat the load.
- */
- do {
- epoch_cyc = cd->epoch_cyc;
- smp_rmb();
- epoch_ns = cd->epoch_ns;
- smp_rmb();
- } while (epoch_cyc != cd->epoch_cyc_copy);
-
- return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift);
-}
-
-/*
- * Otherwise, you need to use this, which will obtain the mult/shift
- * from the clock_data structure. Use init_sched_clock() with this.
- */
-static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd,
- u32 cyc, u32 mask)
-{
- return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift);
-}
-
-/*
- * Initialize the clock data - calculate the appropriate multiplier
- * and shift. Also setup a timer to ensure that the epoch is refreshed
- * at the appropriate time interval, which will call your update
- * handler.
- */
-void init_sched_clock(struct clock_data *, void (*)(void),
- unsigned int, unsigned long);
-
-/*
- * Use this initialization function rather than init_sched_clock() if
- * you're using cyc_to_fixed_sched_clock, which will warn if your
- * constants are incorrect.
- */
-static inline void init_fixed_sched_clock(struct clock_data *cd,
- void (*update)(void), unsigned int bits, unsigned long rate,
- u32 mult, u32 shift)
-{
- init_sched_clock(cd, update, bits, rate);
- if (cd->mult != mult || cd->shift != shift) {
- pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n"
- "sched_clock: fix multiply/shift to avoid scheduler hiccups\n",
- mult, shift, cd->mult, cd->shift);
- }
-}
-
extern void sched_clock_postinit(void);
+extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
#endif
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 915696d..23ebc0c 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -192,11 +192,7 @@
/*
* Memory map description
*/
-#ifdef CONFIG_ARCH_EP93XX
-# define NR_BANKS 16
-#else
-# define NR_BANKS 8
-#endif
+#define NR_BANKS CONFIG_ARM_NR_BANKS
struct membank {
phys_addr_t start;
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 90ffd04..dec6f9a 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -62,4 +62,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index 9997ad2..32ee164 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -24,12 +24,13 @@
#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
{
__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
return x;
}
-#define __arch_swab16 __arch_swab16
+#define __arch_swahb32 __arch_swahb32
+#define __arch_swab16(x) ((__u16)__arch_swahb32(x))
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 984014b..e4c96cc 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -80,6 +80,14 @@
void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
unsigned long err, unsigned long trap);
+#ifdef CONFIG_ARM_LPAE
+#define FAULT_CODE_ALIGNMENT 33
+#define FAULT_CODE_DEBUG 34
+#else
+#define FAULT_CODE_ALIGNMENT 1
+#define FAULT_CODE_DEBUG 2
+#endif
+
void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
struct pt_regs *),
int sig, int code, const char *name);
@@ -100,7 +108,7 @@
extern int __pure cpu_architecture(void);
extern void cpu_init(void);
-void arm_machine_restart(char mode, const char *cmd);
+void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);
#define UDBG_UNDEFINED (1 << 0)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 7b5cc8d..0f30c3a 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -142,7 +142,6 @@
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
-#define TIF_FREEZE 19
#define TIF_RESTORE_SIGMASK 20
#define TIF_SECCOMP 21
@@ -152,7 +151,6 @@
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 265f908..5d3ed7e3 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -202,8 +202,18 @@
tlb_remove_page(tlb, pte);
}
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
+ unsigned long addr)
+{
+#ifdef CONFIG_ARM_LPAE
+ tlb_add_flush(tlb, addr);
+ tlb_remove_page(tlb, virt_to_page(pmdp));
+#endif
+}
+
#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
-#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
+#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp)
#define tlb_migrate_finish(mm) do { } while (0)
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index a7e457e..58b8b84 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -25,7 +25,7 @@
void init_cpu_topology(void);
void store_cpu_topology(unsigned int cpuid);
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+const struct cpumask *cpu_coregroup_mask(int cpu);
#else
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
index 48192ac..28beab9 100644
--- a/arch/arm/include/asm/types.h
+++ b/arch/arm/include/asm/types.h
@@ -3,12 +3,6 @@
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index a5edf42..d1c3f3a 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -30,14 +30,15 @@
};
struct unwind_idx {
- unsigned long addr;
+ unsigned long addr_offset;
unsigned long insn;
};
struct unwind_table {
struct list_head list;
- struct unwind_idx *start;
- struct unwind_idx *stop;
+ const struct unwind_idx *start;
+ const struct unwind_idx *origin;
+ const struct unwind_idx *stop;
unsigned long begin_addr;
unsigned long end_addr;
};
@@ -49,15 +50,6 @@
extern void unwind_table_del(struct unwind_table *tab);
extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
-#ifdef CONFIG_ARM_UNWIND
-extern int __init unwind_init(void);
-#else
-static inline int __init unwind_init(void)
-{
- return 0;
-}
-#endif
-
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_ARM_UNWIND
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 16eed6a..43b740d 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -13,7 +13,7 @@
# Object file lists.
-obj-y := elf.o entry-armv.o entry-common.o irq.o \
+obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \
process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9ad50c4..3a456c6 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -36,12 +36,11 @@
#ifdef CONFIG_MULTI_IRQ_HANDLER
ldr r1, =handle_arch_irq
mov r0, sp
- ldr r1, [r1]
adr lr, BSYM(9997f)
- teq r1, #0
- movne pc, r1
-#endif
+ ldr pc, [r1]
+#else
arch_irq_handler_default
+#endif
9997:
.endm
@@ -497,7 +496,7 @@
.popsection
.pushsection __ex_table,"a"
.long 1b, 4b
-#if __LINUX_ARM_ARCH__ >= 7
+#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
.long 2b, 4b
.long 3b, 4b
#endif
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 08c82fd..14e277d 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -39,8 +39,14 @@
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
+#ifdef CONFIG_ARM_LPAE
+ /* LPAE requires an additional page for the PGD */
+#define PG_DIR_SIZE 0x5000
+#define PMD_ORDER 3
+#else
#define PG_DIR_SIZE 0x4000
#define PMD_ORDER 2
+#endif
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
@@ -164,17 +170,36 @@
teq r0, r6
bne 1b
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Build the PGD table (first level) to point to the PMD table. A PGD
+ * entry is 64-bit wide.
+ */
+ mov r0, r4
+ add r3, r4, #0x1000 @ first PMD table address
+ orr r3, r3, #3 @ PGD block type
+ mov r6, #4 @ PTRS_PER_PGD
+ mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER
+1: str r3, [r0], #4 @ set bottom PGD entry bits
+ str r7, [r0], #4 @ set top PGD entry bits
+ add r3, r3, #0x1000 @ next PMD table
+ subs r6, r6, #1
+ bne 1b
+
+ add r4, r4, #0x1000 @ point to the PMD tables
+#endif
+
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
* Create identity mapping to cater for __enable_mmu.
* This identity mapping will be removed by paging_init().
*/
- adr r0, __enable_mmu_loc
+ adr r0, __turn_mmu_on_loc
ldmia r0, {r3, r5, r6}
sub r0, r0, r3 @ virt->phys offset
- add r5, r5, r0 @ phys __enable_mmu
- add r6, r6, r0 @ phys __enable_mmu_end
+ add r5, r5, r0 @ phys __turn_mmu_on
+ add r6, r6, r0 @ phys __turn_mmu_on_end
mov r5, r5, lsr #SECTION_SHIFT
mov r6, r6, lsr #SECTION_SHIFT
@@ -219,8 +244,8 @@
#endif
/*
- * Then map boot params address in r2 or
- * the first 1MB of ram if boot params address is not specified.
+ * Then map boot params address in r2 or the first 1MB (2MB with LPAE)
+ * of ram if boot params address is not specified.
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
@@ -251,7 +276,15 @@
mov r3, r7, lsr #SECTION_SHIFT
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
orr r3, r7, r3, lsl #SECTION_SHIFT
+#ifdef CONFIG_ARM_LPAE
+ mov r7, #1 << (54 - 32) @ XN
+#else
+ orr r3, r3, #PMD_SECT_XN
+#endif
1: str r3, [r0], #4
+#ifdef CONFIG_ARM_LPAE
+ str r7, [r0], #4
+#endif
add r3, r3, #1 << SECTION_SHIFT
cmp r0, r6
blo 1b
@@ -283,14 +316,17 @@
str r3, [r0]
#endif
#endif
+#ifdef CONFIG_ARM_LPAE
+ sub r4, r4, #0x1000 @ point to the PGD table
+#endif
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
.align
-__enable_mmu_loc:
+__turn_mmu_on_loc:
.long .
- .long __enable_mmu
- .long __enable_mmu_end
+ .long __turn_mmu_on
+ .long __turn_mmu_on_end
#if defined(CONFIG_SMP)
__CPUINIT
@@ -374,12 +410,17 @@
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
+#ifdef CONFIG_ARM_LPAE
+ mov r5, #0
+ mcrr p15, 0, r4, r5, c2 @ load TTBR0
+#else
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
domain_val(DOMAIN_IO, DOMAIN_CLIENT))
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
+#endif
b __turn_mmu_on
ENDPROC(__enable_mmu)
@@ -398,15 +439,19 @@
* other registers depend on the function called upon completion
*/
.align 5
-__turn_mmu_on:
+ .pushsection .idmap.text, "ax"
+ENTRY(__turn_mmu_on)
mov r0, r0
+ instr_sync
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mrc p15, 0, r3, c0, c0, 0 @ read id reg
+ instr_sync
mov r3, r3
mov r3, r13
mov pc, r3
-__enable_mmu_end:
+__turn_mmu_on_end:
ENDPROC(__turn_mmu_on)
+ .popsection
#ifdef CONFIG_SMP_ON_UP
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 814a52a9..d6a95ef 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -1016,10 +1016,10 @@
}
/* Register debug fault handler. */
- hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
- "watchpoint debug exception");
- hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
- "breakpoint debug exception");
+ hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+ TRAP_HWBKPT, "watchpoint debug exception");
+ hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+ TRAP_HWBKPT, "breakpoint debug exception");
/* Register hotplug notifier. */
register_cpu_notifier(&dbg_reset_nb);
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 9fe8910..8a30c89 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -519,10 +519,12 @@
static const union decode_item arm_cccc_0001_____1001_table[] = {
/* Synchronization primitives */
+#if __LINUX_ARM_ARCH__ < 6
+ /* Deprecated on ARMv6 and may be UNDEFINED on v7 */
/* SMP/SWPB cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
DECODE_EMULATEX (0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
REGS(NOPC, NOPC, 0, 0, NOPC)),
-
+#endif
/* LDREX/STREX{,D,B,H} cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
/* And unallocated instructions... */
DECODE_END
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index fc82de8..ba32b39 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -427,18 +427,25 @@
TEST_GROUP("Synchronization primitives")
- /*
- * Use hard coded constants for SWP instructions to avoid warnings
- * about deprecated instructions.
- */
- TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]")
- TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]")
- TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]")
+#if __LINUX_ARM_ARCH__ < 6
+ TEST_RP("swp lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( "swpvs r0, r",1,VAL1,", [sp]")
+ TEST_RP("swp sp, r",14,VAL2,", [r",12,13*4,"]")
+#else
+ TEST_UNSUPPORTED(".word 0xe108e097 @ swp lr, r7, [r8]")
+ TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs r0, r1, [sp]")
+ TEST_UNSUPPORTED(".word 0xe10cd09e @ swp sp, r14 [r12]")
+#endif
TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
- TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]")
- TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]")
+#if __LINUX_ARM_ARCH__ < 6
+ TEST_RP("swpb lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( "swpvsb r0, r",1,VAL1,", [sp]")
+#else
+ TEST_UNSUPPORTED(".word 0xe148e097 @ swpb lr, r7, [r8]")
+ TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb r0, r1, [sp]")
+#endif
TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
@@ -550,7 +557,7 @@
TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
- TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+ TEST_RPR( "strd r",2, VAL1,", [r",5, 24,"], r",4,48,"")
TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!")
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
index 5e726c3..5d8b857 100644
--- a/arch/arm/kernel/kprobes-test-thumb.c
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -222,8 +222,8 @@
DONT_TEST_IN_ITBLOCK(
TEST_BF_R( "cbnz r",0,0, ", 2f")
TEST_BF_R( "cbz r",2,-1,", 2f")
- TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20)
- TEST_BF_RX( "cbz r",7,0, ", 2f",0x40)
+ TEST_BF_RX( "cbnz r",4,1, ", 2f", SPACE_0x20)
+ TEST_BF_RX( "cbz r",7,0, ", 2f", SPACE_0x40)
)
TEST_R("sxth r0, r",7, HH1,"")
TEST_R("sxth r7, r",0, HH2,"")
@@ -246,7 +246,7 @@
TESTCASE_START(code) \
TEST_ARG_PTR(13, offset) \
TEST_ARG_END("") \
- TEST_BRANCH_F(code,0) \
+ TEST_BRANCH_F(code) \
TESTCASE_END
TEST("push {r0}")
@@ -319,8 +319,8 @@
TEST_BF( "b 2f")
TEST_BB( "b 2b")
- TEST_BF_X("b 2f", 0x400)
- TEST_BB_X("b 2b", 0x400)
+ TEST_BF_X("b 2f", SPACE_0x400)
+ TEST_BB_X("b 2b", SPACE_0x400)
TEST_GROUP("Testing instructions in IT blocks")
@@ -746,7 +746,7 @@
TEST_BB("bne.w 2b")
TEST_BF("bgt.w 2f")
TEST_BB("blt.w 2b")
- TEST_BF_X("bpl.w 2f",0x1000)
+ TEST_BF_X("bpl.w 2f", SPACE_0x1000)
)
TEST_UNSUPPORTED("msr cpsr, r0")
@@ -786,11 +786,11 @@
TEST_BF( "b.w 2f")
TEST_BB( "b.w 2b")
- TEST_BF_X("b.w 2f", 0x1000)
+ TEST_BF_X("b.w 2f", SPACE_0x1000)
TEST_BF( "bl.w 2f")
TEST_BB( "bl.w 2b")
- TEST_BB_X("bl.w 2b", 0x1000)
+ TEST_BB_X("bl.w 2b", SPACE_0x1000)
TEST_X( "blx __dummy_arm_subroutine",
".arm \n\t"
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
index e17cdd6..1862d8f 100644
--- a/arch/arm/kernel/kprobes-test.c
+++ b/arch/arm/kernel/kprobes-test.c
@@ -202,6 +202,8 @@
#include <linux/slab.h>
#include <linux/kprobes.h>
+#include <asm/opcodes.h>
+
#include "kprobes.h"
#include "kprobes-test.h"
@@ -1050,65 +1052,9 @@
static unsigned long test_check_cc(int cc, unsigned long cpsr)
{
- unsigned long temp;
+ int ret = arm_check_condition(cc << 28, cpsr);
- switch (cc) {
- case 0x0: /* eq */
- return cpsr & PSR_Z_BIT;
-
- case 0x1: /* ne */
- return (~cpsr) & PSR_Z_BIT;
-
- case 0x2: /* cs */
- return cpsr & PSR_C_BIT;
-
- case 0x3: /* cc */
- return (~cpsr) & PSR_C_BIT;
-
- case 0x4: /* mi */
- return cpsr & PSR_N_BIT;
-
- case 0x5: /* pl */
- return (~cpsr) & PSR_N_BIT;
-
- case 0x6: /* vs */
- return cpsr & PSR_V_BIT;
-
- case 0x7: /* vc */
- return (~cpsr) & PSR_V_BIT;
-
- case 0x8: /* hi */
- cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
- return cpsr & PSR_C_BIT;
-
- case 0x9: /* ls */
- cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
- return (~cpsr) & PSR_C_BIT;
-
- case 0xa: /* ge */
- cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- return (~cpsr) & PSR_N_BIT;
-
- case 0xb: /* lt */
- cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- return cpsr & PSR_N_BIT;
-
- case 0xc: /* gt */
- temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
- return (~temp) & PSR_N_BIT;
-
- case 0xd: /* le */
- temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
- return temp & PSR_N_BIT;
-
- case 0xe: /* al */
- case 0xf: /* unconditional */
- return true;
- }
- BUG();
- return false;
+ return (ret != ARM_OPCODE_CONDTEST_FAIL);
}
static int is_last_scenario;
@@ -1128,7 +1074,9 @@
if (!test_case_is_thumb) {
/* Testing ARM code */
- probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+ int cc = current_instruction >> 28;
+
+ probe_should_run = test_check_cc(cc, cpsr) != 0;
if (scenario == 15)
is_last_scenario = true;
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
index 0dc5d77..e28a869 100644
--- a/arch/arm/kernel/kprobes-test.h
+++ b/arch/arm/kernel/kprobes-test.h
@@ -149,23 +149,31 @@
"1: "instruction" \n\t" \
" nop \n\t"
-#define TEST_BRANCH_F(instruction, xtra_dist) \
+#define TEST_BRANCH_F(instruction) \
TEST_INSTRUCTION(instruction) \
- ".if "#xtra_dist" \n\t" \
- " b 99f \n\t" \
- ".space "#xtra_dist" \n\t" \
- ".endif \n\t" \
" b 99f \n\t" \
"2: nop \n\t"
-#define TEST_BRANCH_B(instruction, xtra_dist) \
+#define TEST_BRANCH_B(instruction) \
" b 50f \n\t" \
" b 99f \n\t" \
"2: nop \n\t" \
" b 99f \n\t" \
- ".if "#xtra_dist" \n\t" \
- ".space "#xtra_dist" \n\t" \
- ".endif \n\t" \
+ TEST_INSTRUCTION(instruction)
+
+#define TEST_BRANCH_FX(instruction, codex) \
+ TEST_INSTRUCTION(instruction) \
+ " b 99f \n\t" \
+ codex" \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t"
+
+#define TEST_BRANCH_BX(instruction, codex) \
+ " b 50f \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t" \
+ " b 99f \n\t" \
+ codex" \n\t" \
TEST_INSTRUCTION(instruction)
#define TESTCASE_END \
@@ -301,47 +309,60 @@
TESTCASE_START(code1 #reg1 code2) \
TEST_ARG_PTR(reg1, val1) \
TEST_ARG_END("") \
- TEST_BRANCH_F(code1 #reg1 code2, 0) \
+ TEST_BRANCH_F(code1 #reg1 code2) \
TESTCASE_END
-#define TEST_BF_X(code, xtra_dist) \
+#define TEST_BF(code) \
TESTCASE_START(code) \
TEST_ARG_END("") \
- TEST_BRANCH_F(code, xtra_dist) \
+ TEST_BRANCH_F(code) \
TESTCASE_END
-#define TEST_BB_X(code, xtra_dist) \
+#define TEST_BB(code) \
TESTCASE_START(code) \
TEST_ARG_END("") \
- TEST_BRANCH_B(code, xtra_dist) \
+ TEST_BRANCH_B(code) \
TESTCASE_END
-#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \
- TESTCASE_START(code1 #reg code2) \
- TEST_ARG_REG(reg, val) \
- TEST_ARG_END("") \
- TEST_BRANCH_F(code1 #reg code2, xtra_dist) \
+#define TEST_BF_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg code2) \
TESTCASE_END
-#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \
- TESTCASE_START(code1 #reg code2) \
- TEST_ARG_REG(reg, val) \
- TEST_ARG_END("") \
- TEST_BRANCH_B(code1 #reg code2, xtra_dist) \
+#define TEST_BB_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code1 #reg code2) \
TESTCASE_END
-#define TEST_BF(code) TEST_BF_X(code, 0)
-#define TEST_BB(code) TEST_BB_X(code, 0)
-
-#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
-#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
-
#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
TEST_ARG_REG(reg1, val1) \
TEST_ARG_REG(reg2, val2) \
TEST_ARG_END("") \
- TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \
+ TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_BF_X(code, codex) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_FX(code, codex) \
+ TESTCASE_END
+
+#define TEST_BB_X(code, codex) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_BX(code, codex) \
+ TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, codex) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_FX(code1 #reg code2, codex) \
TESTCASE_END
#define TEST_X(code, codex) \
@@ -372,6 +393,25 @@
TESTCASE_END
+/*
+ * Macros for defining space directives spread over multiple lines.
+ * These are required so the compiler guesses better the length of inline asm
+ * code and will spill the literal pool early enough to avoid generating PC
+ * relative loads with out of range offsets.
+ */
+#define TWICE(x) x x
+#define SPACE_0x8 TWICE(".space 4\n\t")
+#define SPACE_0x10 TWICE(SPACE_0x8)
+#define SPACE_0x20 TWICE(SPACE_0x10)
+#define SPACE_0x40 TWICE(SPACE_0x20)
+#define SPACE_0x80 TWICE(SPACE_0x40)
+#define SPACE_0x100 TWICE(SPACE_0x80)
+#define SPACE_0x200 TWICE(SPACE_0x100)
+#define SPACE_0x400 TWICE(SPACE_0x200)
+#define SPACE_0x800 TWICE(SPACE_0x400)
+#define SPACE_0x1000 TWICE(SPACE_0x800)
+
+
/* Various values used in test cases... */
#define N(val) (val ^ 0xffffffff)
#define VAL1 0x12345678
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
index 0bcd383..1911dae 100644
--- a/arch/arm/kernel/leds.c
+++ b/arch/arm/kernel/leds.c
@@ -9,7 +9,7 @@
*/
#include <linux/export.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/string.h>
@@ -34,8 +34,8 @@
{ "red", led_red_on, led_red_off },
};
-static ssize_t leds_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t leds_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
int ret = -EINVAL, len = strcspn(buf, " ");
@@ -69,15 +69,16 @@
return ret;
}
-static SYSDEV_ATTR(event, 0200, NULL, leds_store);
+static DEVICE_ATTR(event, 0200, NULL, leds_store);
-static struct sysdev_class leds_sysclass = {
+static struct bus_type leds_subsys = {
.name = "leds",
+ .dev_name = "leds",
};
-static struct sys_device leds_device = {
+static struct device leds_device = {
.id = 0,
- .cls = &leds_sysclass,
+ .bus = &leds_subsys,
};
static int leds_suspend(void)
@@ -105,11 +106,11 @@
static int __init leds_init(void)
{
int ret;
- ret = sysdev_class_register(&leds_sysclass);
+ ret = subsys_system_register(&leds_subsys, NULL);
if (ret == 0)
- ret = sysdev_register(&leds_device);
+ ret = device_register(&leds_device);
if (ret == 0)
- ret = sysdev_create_file(&leds_device, &attr_event);
+ ret = device_create_file(&leds_device, &dev_attr_event);
if (ret == 0)
register_syscore_ops(&leds_syscore_ops);
return ret;
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index e59bbd4..764bd45 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -12,12 +12,11 @@
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
+#include <asm/system.h>
extern const unsigned char relocate_new_kernel[];
extern const unsigned int relocate_new_kernel_size;
-extern void setup_mm_for_reboot(char mode);
-
extern unsigned long kexec_start_address;
extern unsigned long kexec_indirection_page;
extern unsigned long kexec_mach_type;
@@ -111,14 +110,6 @@
if (kexec_reinit)
kexec_reinit();
- local_irq_disable();
- local_fiq_disable();
- setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
- flush_cache_all();
- outer_flush_all();
- outer_disable();
- cpu_proc_fin();
- outer_inv_all();
- flush_cache_all();
- cpu_reset(reboot_code_buffer_phys);
+
+ soft_restart(reboot_code_buffer_phys);
}
diff --git a/arch/arm/kernel/opcodes.c b/arch/arm/kernel/opcodes.c
new file mode 100644
index 0000000..f8179c6
--- /dev/null
+++ b/arch/arm/kernel/opcodes.c
@@ -0,0 +1,72 @@
+/*
+ * linux/arch/arm/kernel/opcodes.c
+ *
+ * A32 condition code lookup feature moved from nwfpe/fpopcode.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <asm/opcodes.h>
+
+#define ARM_OPCODE_CONDITION_UNCOND 0xf
+
+/*
+ * condition code lookup table
+ * index into the table is test code: EQ, NE, ... LT, GT, AL, NV
+ *
+ * bit position in short is condition code: NZCV
+ */
+static const unsigned short cc_map[16] = {
+ 0xF0F0, /* EQ == Z set */
+ 0x0F0F, /* NE */
+ 0xCCCC, /* CS == C set */
+ 0x3333, /* CC */
+ 0xFF00, /* MI == N set */
+ 0x00FF, /* PL */
+ 0xAAAA, /* VS == V set */
+ 0x5555, /* VC */
+ 0x0C0C, /* HI == C set && Z clear */
+ 0xF3F3, /* LS == C clear || Z set */
+ 0xAA55, /* GE == (N==V) */
+ 0x55AA, /* LT == (N!=V) */
+ 0x0A05, /* GT == (!Z && (N==V)) */
+ 0xF5FA, /* LE == (Z || (N!=V)) */
+ 0xFFFF, /* AL always */
+ 0 /* NV */
+};
+
+/*
+ * Returns:
+ * ARM_OPCODE_CONDTEST_FAIL - if condition fails
+ * ARM_OPCODE_CONDTEST_PASS - if condition passes (including AL)
+ * ARM_OPCODE_CONDTEST_UNCOND - if NV condition, or separate unconditional
+ * opcode space from v5 onwards
+ *
+ * Code that tests whether a conditional instruction would pass its condition
+ * check should check that return value == ARM_OPCODE_CONDTEST_PASS.
+ *
+ * Code that tests if a condition means that the instruction would be executed
+ * (regardless of conditional or unconditional) should instead check that the
+ * return value != ARM_OPCODE_CONDTEST_FAIL.
+ */
+asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr)
+{
+ u32 cc_bits = opcode >> 28;
+ u32 psr_cond = psr >> 28;
+ unsigned int ret;
+
+ if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
+ if ((cc_map[cc_bits] >> (psr_cond)) & 1)
+ ret = ARM_OPCODE_CONDTEST_PASS;
+ else
+ ret = ARM_OPCODE_CONDTEST_FAIL;
+ } else {
+ ret = ARM_OPCODE_CONDTEST_UNCOND;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(arm_check_condition);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 24e2347..5bb91bf 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -59,8 +59,7 @@
}
EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
-int
-armpmu_get_max_events(void)
+int perf_num_counters(void)
{
int max_events = 0;
@@ -69,12 +68,6 @@
return max_events;
}
-EXPORT_SYMBOL_GPL(armpmu_get_max_events);
-
-int perf_num_counters(void)
-{
- return armpmu_get_max_events();
-}
EXPORT_SYMBOL_GPL(perf_num_counters);
#define HW_OP_UNSUPPORTED 0xFFFF
@@ -343,19 +336,25 @@
{
struct perf_event *sibling, *leader = event->group_leader;
struct pmu_hw_events fake_pmu;
+ DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
- memset(&fake_pmu, 0, sizeof(fake_pmu));
+ /*
+ * Initialise the fake PMU. We only need to populate the
+ * used_mask for the purposes of validation.
+ */
+ memset(fake_used_mask, 0, sizeof(fake_used_mask));
+ fake_pmu.used_mask = fake_used_mask;
if (!validate_event(&fake_pmu, leader))
- return -ENOSPC;
+ return -EINVAL;
list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
if (!validate_event(&fake_pmu, sibling))
- return -ENOSPC;
+ return -EINVAL;
}
if (!validate_event(&fake_pmu, event))
- return -ENOSPC;
+ return -EINVAL;
return 0;
}
@@ -374,6 +373,8 @@
{
int i, irq, irqs;
struct platform_device *pmu_device = armpmu->plat_device;
+ struct arm_pmu_platdata *plat =
+ dev_get_platdata(&pmu_device->dev);
irqs = min(pmu_device->num_resources, num_possible_cpus());
@@ -381,8 +382,11 @@
if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
continue;
irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
+ if (irq >= 0) {
+ if (plat && plat->disable_irq)
+ plat->disable_irq(irq);
free_irq(irq, armpmu);
+ }
}
release_pmu(armpmu->type);
@@ -396,6 +400,9 @@
int i, err, irq, irqs;
struct platform_device *pmu_device = armpmu->plat_device;
+ if (!pmu_device)
+ return -ENODEV;
+
err = reserve_pmu(armpmu->type);
if (err) {
pr_warning("unable to reserve pmu\n");
@@ -439,7 +446,8 @@
irq);
armpmu_release_hardware(armpmu);
return err;
- }
+ } else if (plat && plat->enable_irq)
+ plat->enable_irq(irq);
cpumask_set_cpu(i, &armpmu->active_irqs);
}
@@ -631,6 +639,9 @@
static int __devinit armpmu_device_probe(struct platform_device *pdev)
{
+ if (!cpu_pmu)
+ return -ENODEV;
+
cpu_pmu->plat_device = pdev;
return 0;
}
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index e63d811..533be99 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -65,13 +65,15 @@
* accesses/misses in hardware.
*/
static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL,
};
static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -218,13 +220,15 @@
* accesses/misses in hardware.
*/
static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
};
static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 1ef6d00..460bbbb 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -28,165 +28,87 @@
* they are not available.
*/
enum armv7_perf_types {
- ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
- ARMV7_PERFCTR_IFETCH_MISS = 0x01,
- ARMV7_PERFCTR_ITLB_MISS = 0x02,
- ARMV7_PERFCTR_DCACHE_REFILL = 0x03, /* L1 */
- ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, /* L1 */
- ARMV7_PERFCTR_DTLB_REFILL = 0x05,
- ARMV7_PERFCTR_DREAD = 0x06,
- ARMV7_PERFCTR_DWRITE = 0x07,
- ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
- ARMV7_PERFCTR_EXC_TAKEN = 0x09,
- ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
- ARMV7_PERFCTR_CID_WRITE = 0x0B,
- /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+ ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
+ ARMV7_PERFCTR_L1_ICACHE_REFILL = 0x01,
+ ARMV7_PERFCTR_ITLB_REFILL = 0x02,
+ ARMV7_PERFCTR_L1_DCACHE_REFILL = 0x03,
+ ARMV7_PERFCTR_L1_DCACHE_ACCESS = 0x04,
+ ARMV7_PERFCTR_DTLB_REFILL = 0x05,
+ ARMV7_PERFCTR_MEM_READ = 0x06,
+ ARMV7_PERFCTR_MEM_WRITE = 0x07,
+ ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
+ ARMV7_PERFCTR_EXC_TAKEN = 0x09,
+ ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
+ ARMV7_PERFCTR_CID_WRITE = 0x0B,
+
+ /*
+ * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
* It counts:
- * - all branch instructions,
+ * - all (taken) branch instructions,
* - instructions that explicitly write the PC,
* - exception generating instructions.
*/
- ARMV7_PERFCTR_PC_WRITE = 0x0C,
- ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
- ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
- ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
+ ARMV7_PERFCTR_PC_WRITE = 0x0C,
+ ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
+ ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
+ ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS = 0x0F,
+ ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
+ ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
+ ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12,
/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
- ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
- ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
- ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12,
- ARMV7_PERFCTR_MEM_ACCESS = 0x13,
- ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14,
- ARMV7_PERFCTR_L1_DCACHE_WB = 0x15,
- ARMV7_PERFCTR_L2_DCACHE_ACCESS = 0x16,
- ARMV7_PERFCTR_L2_DCACHE_REFILL = 0x17,
- ARMV7_PERFCTR_L2_DCACHE_WB = 0x18,
- ARMV7_PERFCTR_BUS_ACCESS = 0x19,
- ARMV7_PERFCTR_MEMORY_ERROR = 0x1A,
- ARMV7_PERFCTR_INSTR_SPEC = 0x1B,
- ARMV7_PERFCTR_TTBR_WRITE = 0x1C,
- ARMV7_PERFCTR_BUS_CYCLES = 0x1D,
+ ARMV7_PERFCTR_MEM_ACCESS = 0x13,
+ ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14,
+ ARMV7_PERFCTR_L1_DCACHE_WB = 0x15,
+ ARMV7_PERFCTR_L2_CACHE_ACCESS = 0x16,
+ ARMV7_PERFCTR_L2_CACHE_REFILL = 0x17,
+ ARMV7_PERFCTR_L2_CACHE_WB = 0x18,
+ ARMV7_PERFCTR_BUS_ACCESS = 0x19,
+ ARMV7_PERFCTR_MEM_ERROR = 0x1A,
+ ARMV7_PERFCTR_INSTR_SPEC = 0x1B,
+ ARMV7_PERFCTR_TTBR_WRITE = 0x1C,
+ ARMV7_PERFCTR_BUS_CYCLES = 0x1D,
- ARMV7_PERFCTR_CPU_CYCLES = 0xFF
+ ARMV7_PERFCTR_CPU_CYCLES = 0xFF
};
/* ARMv7 Cortex-A8 specific event types */
enum armv7_a8_perf_types {
- ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
- ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
- ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
- ARMV7_PERFCTR_L2_ACCESS = 0x43,
- ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
- ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
- ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
- ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
- ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
- ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
- ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
- ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
- ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
- ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
- ARMV7_PERFCTR_L2_NEON = 0x4E,
- ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
- ARMV7_PERFCTR_L1_INST = 0x50,
- ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
- ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
- ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
- ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
- ARMV7_PERFCTR_OP_EXECUTED = 0x55,
- ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
- ARMV7_PERFCTR_CYCLES_INST = 0x57,
- ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
- ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
- ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
-
- ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
- ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
- ARMV7_PERFCTR_PMU_EVENTS = 0x72,
+ ARMV7_A8_PERFCTR_L2_CACHE_ACCESS = 0x43,
+ ARMV7_A8_PERFCTR_L2_CACHE_REFILL = 0x44,
+ ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS = 0x50,
+ ARMV7_A8_PERFCTR_STALL_ISIDE = 0x56,
};
/* ARMv7 Cortex-A9 specific event types */
enum armv7_a9_perf_types {
- ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
- ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
- ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
-
- ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
- ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
-
- ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
- ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
- ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
- ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
- ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
- ARMV7_PERFCTR_DATA_EVICTION = 0x65,
- ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
- ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
- ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
-
- ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
-
- ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
- ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
- ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
- ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
- ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
-
- ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
- ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
- ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
- ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
- ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
- ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
- ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
-
- ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
- ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
-
- ARMV7_PERFCTR_ISB_INST = 0x90,
- ARMV7_PERFCTR_DSB_INST = 0x91,
- ARMV7_PERFCTR_DMB_INST = 0x92,
- ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
-
- ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
- ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
- ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
- ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
- ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
- ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
+ ARMV7_A9_PERFCTR_INSTR_CORE_RENAME = 0x68,
+ ARMV7_A9_PERFCTR_STALL_ICACHE = 0x60,
+ ARMV7_A9_PERFCTR_STALL_DISPATCH = 0x66,
};
/* ARMv7 Cortex-A5 specific event types */
enum armv7_a5_perf_types {
- ARMV7_PERFCTR_IRQ_TAKEN = 0x86,
- ARMV7_PERFCTR_FIQ_TAKEN = 0x87,
-
- ARMV7_PERFCTR_EXT_MEM_RQST = 0xc0,
- ARMV7_PERFCTR_NC_EXT_MEM_RQST = 0xc1,
- ARMV7_PERFCTR_PREFETCH_LINEFILL = 0xc2,
- ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3,
- ARMV7_PERFCTR_ENTER_READ_ALLOC = 0xc4,
- ARMV7_PERFCTR_READ_ALLOC = 0xc5,
-
- ARMV7_PERFCTR_STALL_SB_FULL = 0xc9,
+ ARMV7_A5_PERFCTR_PREFETCH_LINEFILL = 0xc2,
+ ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3,
};
/* ARMv7 Cortex-A15 specific event types */
enum armv7_a15_perf_types {
- ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS = 0x40,
- ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS = 0x41,
- ARMV7_PERFCTR_L1_DCACHE_READ_REFILL = 0x42,
- ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL = 0x43,
+ ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ = 0x40,
+ ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE = 0x41,
+ ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ = 0x42,
+ ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE = 0x43,
- ARMV7_PERFCTR_L1_DTLB_READ_REFILL = 0x4C,
- ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL = 0x4D,
+ ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ = 0x4C,
+ ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE = 0x4D,
- ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS = 0x50,
- ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS = 0x51,
- ARMV7_PERFCTR_L2_DCACHE_READ_REFILL = 0x52,
- ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL = 0x53,
+ ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ = 0x50,
+ ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE = 0x51,
+ ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ = 0x52,
+ ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE = 0x53,
- ARMV7_PERFCTR_SPEC_PC_WRITE = 0x76,
+ ARMV7_A15_PERFCTR_PC_WRITE_SPEC = 0x76,
};
/*
@@ -197,13 +119,15 @@
* accesses/misses in hardware.
*/
static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A8_PERFCTR_STALL_ISIDE,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
};
static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -217,12 +141,12 @@
* combined.
*/
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -231,12 +155,12 @@
},
[C(L1I)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -245,12 +169,12 @@
},
[C(LL)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -274,11 +198,11 @@
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -287,14 +211,12 @@
},
[C(BPU)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -321,14 +243,15 @@
* Cortex-A9 HW events mapping
*/
static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] =
- ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
- [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_DCACHE_REFILL,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_A9_PERFCTR_INSTR_CORE_RENAME,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A9_PERFCTR_STALL_ICACHE,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV7_A9_PERFCTR_STALL_DISPATCH,
};
static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -342,12 +265,12 @@
* combined.
*/
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -357,11 +280,11 @@
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -399,11 +322,11 @@
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -412,14 +335,12 @@
},
[C(BPU)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -446,13 +367,15 @@
* Cortex-A5 HW events mapping
*/
static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
};
static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -460,42 +383,34 @@
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_PREFETCH_LINEFILL,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+ [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
+ [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
},
},
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
/*
* The prefetch counters don't differentiate between the I
* side and the D side.
*/
[C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_PREFETCH_LINEFILL,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+ [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
+ [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
},
},
[C(LL)] = {
@@ -529,11 +444,11 @@
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -543,13 +458,11 @@
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -562,13 +475,15 @@
* Cortex-A15 HW events mapping
*/
static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_SPEC_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A15_PERFCTR_PC_WRITE_SPEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
};
static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -576,16 +491,12 @@
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L1_DCACHE_READ_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -601,11 +512,11 @@
*/
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -614,16 +525,12 @@
},
[C(LL)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L2_DCACHE_READ_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -633,13 +540,11 @@
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L1_DTLB_READ_REFILL,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -649,11 +554,11 @@
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
@@ -663,13 +568,11 @@
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index e0cca10..3b99d82 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -48,13 +48,15 @@
};
static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
- [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
- [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
+ [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
+ [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = XSCALE_PERFCTR_ICACHE_NO_DELIVER,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
};
static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index 2c3407e..2334bf8 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -33,3 +33,4 @@
{
clear_bit_unlock(type, pmu_lock);
}
+EXPORT_SYMBOL_GPL(release_pmu);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 75316f0..971d65c 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -57,7 +57,7 @@
"ARM" , "Thumb" , "Jazelle", "ThumbEE"
};
-extern void setup_mm_for_reboot(char mode);
+extern void setup_mm_for_reboot(void);
static volatile int hlt_counter;
@@ -92,18 +92,24 @@
__setup("nohlt", nohlt_setup);
__setup("hlt", hlt_setup);
-void arm_machine_restart(char mode, const char *cmd)
-{
- /* Disable interrupts first */
- local_irq_disable();
- local_fiq_disable();
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+typedef void (*phys_reset_t)(unsigned long);
- /*
- * Tell the mm system that we are going to reboot -
- * we may need it to insert some 1:1 mappings so that
- * soft boot works.
- */
- setup_mm_for_reboot(mode);
+/*
+ * A temporary stack to use for CPU reset. This is static so that we
+ * don't clobber it with the identity mapping. When running with this
+ * stack, any references to the current task *will not work* so you
+ * should really do as little as possible before jumping to your reset
+ * code.
+ */
+static u64 soft_restart_stack[16];
+
+static void __soft_restart(void *addr)
+{
+ phys_reset_t phys_reset;
+
+ /* Take out a flat memory mapping. */
+ setup_mm_for_reboot();
/* Clean and invalidate caches */
flush_cache_all();
@@ -114,18 +120,35 @@
/* Push out any further dirty data, and ensure cache is empty */
flush_cache_all();
- /*
- * Now call the architecture specific reboot code.
- */
- arch_reset(mode, cmd);
+ /* Switch to the identity mapping. */
+ phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+ phys_reset((unsigned long)addr);
- /*
- * Whoops - the architecture was unable to reboot.
- * Tell the user!
- */
- mdelay(1000);
- printk("Reboot failed -- System halted\n");
- while (1);
+ /* Should never get here. */
+ BUG();
+}
+
+void soft_restart(unsigned long addr)
+{
+ u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
+
+ /* Disable interrupts first */
+ local_irq_disable();
+ local_fiq_disable();
+
+ /* Disable the L2 if we're the last man standing. */
+ if (num_online_cpus() == 1)
+ outer_disable();
+
+ /* Change to the new stack and continue with the reset. */
+ call_with_stack(__soft_restart, (void *)addr, (void *)stack);
+
+ /* Should never get here. */
+ BUG();
+}
+
+static void null_restart(char mode, const char *cmd)
+{
}
/*
@@ -134,7 +157,7 @@
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
-void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = null_restart;
EXPORT_SYMBOL_GPL(arm_pm_restart);
static void do_nothing(void *unused)
@@ -183,7 +206,8 @@
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
leds_event(led_idle_start);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
@@ -192,6 +216,9 @@
#endif
local_irq_disable();
+#ifdef CONFIG_PL310_ERRATA_769419
+ wmb();
+#endif
if (hlt_counter) {
local_irq_enable();
cpu_relax();
@@ -210,7 +237,8 @@
}
}
leds_event(led_idle_end);
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
@@ -250,7 +278,15 @@
void machine_restart(char *cmd)
{
machine_shutdown();
+
arm_pm_restart(reboot_mode, cmd);
+
+ /* Give a grace period for failure to restart of 1s */
+ mdelay(1000);
+
+ /* Whoops - the platform was unable to reboot. Tell the user! */
+ printk("Reboot failed -- System halted\n");
+ while (1);
}
void __show_regs(struct pt_regs *regs)
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 9a46370..5416c7c 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -14,61 +14,153 @@
#include <asm/sched_clock.h>
+struct clock_data {
+ u64 epoch_ns;
+ u32 epoch_cyc;
+ u32 epoch_cyc_copy;
+ u32 mult;
+ u32 shift;
+};
+
static void sched_clock_poll(unsigned long wrap_ticks);
static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
-static void (*sched_clock_update_fn)(void);
+
+static struct clock_data cd = {
+ .mult = NSEC_PER_SEC / HZ,
+};
+
+static u32 __read_mostly sched_clock_mask = 0xffffffff;
+
+static u32 notrace jiffy_sched_clock_read(void)
+{
+ return (u32)(jiffies - INITIAL_JIFFIES);
+}
+
+static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
+
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+ return (cyc * mult) >> shift;
+}
+
+static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
+{
+ u64 epoch_ns;
+ u32 epoch_cyc;
+
+ /*
+ * Load the epoch_cyc and epoch_ns atomically. We do this by
+ * ensuring that we always write epoch_cyc, epoch_ns and
+ * epoch_cyc_copy in strict order, and read them in strict order.
+ * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
+ * the middle of an update, and we should repeat the load.
+ */
+ do {
+ epoch_cyc = cd.epoch_cyc;
+ smp_rmb();
+ epoch_ns = cd.epoch_ns;
+ smp_rmb();
+ } while (epoch_cyc != cd.epoch_cyc_copy);
+
+ return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd.mult, cd.shift);
+}
+
+/*
+ * Atomically update the sched_clock epoch.
+ */
+static void notrace update_sched_clock(void)
+{
+ unsigned long flags;
+ u32 cyc;
+ u64 ns;
+
+ cyc = read_sched_clock();
+ ns = cd.epoch_ns +
+ cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask,
+ cd.mult, cd.shift);
+ /*
+ * Write epoch_cyc and epoch_ns in a way that the update is
+ * detectable in cyc_to_fixed_sched_clock().
+ */
+ raw_local_irq_save(flags);
+ cd.epoch_cyc = cyc;
+ smp_wmb();
+ cd.epoch_ns = ns;
+ smp_wmb();
+ cd.epoch_cyc_copy = cyc;
+ raw_local_irq_restore(flags);
+}
static void sched_clock_poll(unsigned long wrap_ticks)
{
mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
- sched_clock_update_fn();
+ update_sched_clock();
}
-void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
- unsigned int clock_bits, unsigned long rate)
+void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
{
unsigned long r, w;
u64 res, wrap;
char r_unit;
- sched_clock_update_fn = update;
+ BUG_ON(bits > 32);
+ WARN_ON(!irqs_disabled());
+ WARN_ON(read_sched_clock != jiffy_sched_clock_read);
+ read_sched_clock = read;
+ sched_clock_mask = (1 << bits) - 1;
/* calculate the mult/shift to convert counter ticks to ns. */
- clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 0);
+ clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
r = rate;
if (r >= 4000000) {
r /= 1000000;
r_unit = 'M';
- } else {
+ } else if (r >= 1000) {
r /= 1000;
r_unit = 'k';
- }
+ } else
+ r_unit = ' ';
/* calculate how many ns until we wrap */
- wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift);
+ wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift);
do_div(wrap, NSEC_PER_MSEC);
w = wrap;
/* calculate the ns resolution of this counter */
- res = cyc_to_ns(1ULL, cd->mult, cd->shift);
+ res = cyc_to_ns(1ULL, cd.mult, cd.shift);
pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n",
- clock_bits, r, r_unit, res, w);
+ bits, r, r_unit, res, w);
/*
* Start the timer to keep sched_clock() properly updated and
* sets the initial epoch.
*/
sched_clock_timer.data = msecs_to_jiffies(w - (w / 10));
- update();
+ update_sched_clock();
/*
* Ensure that sched_clock() starts off at 0ns
*/
- cd->epoch_ns = 0;
+ cd.epoch_ns = 0;
+
+ pr_debug("Registered %pF as sched_clock source\n", read);
+}
+
+unsigned long long notrace sched_clock(void)
+{
+ u32 cyc = read_sched_clock();
+ return cyc_to_sched_clock(cyc, sched_clock_mask);
}
void __init sched_clock_postinit(void)
{
+ /*
+ * If no sched_clock function has been provided at that point,
+ * make it the final one one.
+ */
+ if (read_sched_clock == jiffy_sched_clock_read)
+ setup_sched_clock(jiffy_sched_clock_read, 32, HZ);
+
sched_clock_poll(sched_clock_timer.data);
}
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3448a3f..129fbd5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -31,6 +31,7 @@
#include <linux/memblock.h>
#include <linux/bug.h>
#include <linux/compiler.h>
+#include <linux/sort.h>
#include <asm/unified.h>
#include <asm/cpu.h>
@@ -52,6 +53,7 @@
#include <asm/mach/time.h>
#include <asm/traps.h>
#include <asm/unwind.h>
+#include <asm/memblock.h>
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
#include "compat.h"
@@ -890,13 +892,17 @@
return mdesc;
}
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+ const struct membank *a = _a, *b = _b;
+ long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+ return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
void __init setup_arch(char **cmdline_p)
{
struct machine_desc *mdesc;
- unwind_init();
-
setup_processor();
mdesc = setup_machine_fdt(__atags_pointer);
if (!mdesc)
@@ -904,8 +910,14 @@
machine_desc = mdesc;
machine_name = mdesc->name;
- if (mdesc->soft_reboot)
- reboot_setup("s");
+#ifdef CONFIG_ZONE_DMA
+ if (mdesc->dma_zone_size) {
+ extern unsigned long arm_dma_zone_size;
+ arm_dma_zone_size = mdesc->dma_zone_size;
+ }
+#endif
+ if (mdesc->restart_mode)
+ reboot_setup(&mdesc->restart_mode);
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
@@ -918,12 +930,16 @@
parse_early_param();
+ sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
sanity_check_meminfo();
arm_memblock_init(&meminfo, mdesc);
paging_init(mdesc);
request_standard_resources(mdesc);
+ if (mdesc->restart)
+ arm_pm_restart = mdesc->restart;
+
unflatten_device_tree();
#ifdef CONFIG_SMP
@@ -934,12 +950,6 @@
tcm_init();
-#ifdef CONFIG_ZONE_DMA
- if (mdesc->dma_zone_size) {
- extern unsigned long arm_dma_zone_size;
- arm_dma_zone_size = mdesc->dma_zone_size;
- }
-#endif
#ifdef CONFIG_MULTI_IRQ_HANDLER
handle_arch_irq = mdesc->handle_irq;
#endif
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 020e99c..1f268bd 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -54,14 +54,18 @@
* r0 = control register value
*/
.align 5
+ .pushsection .idmap.text,"ax"
ENTRY(cpu_resume_mmu)
ldr r3, =cpu_resume_after_mmu
+ instr_sync
mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc
mrc p15, 0, r0, c0, c0, 0 @ read id reg
+ instr_sync
mov r0, r0
mov r0, r0
mov pc, r3 @ jump to virtual address
ENDPROC(cpu_resume_mmu)
+ .popsection
cpu_resume_after_mmu:
bl cpu_init @ restore the und/abt/irq banked regs
mov r0, #0 @ return zero on success
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ef5640b..57db122 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -31,6 +31,7 @@
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/exception.h>
+#include <asm/idmap.h>
#include <asm/topology.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
@@ -61,7 +62,6 @@
{
struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
struct task_struct *idle = ci->idle;
- pgd_t *pgd;
int ret;
/*
@@ -84,29 +84,11 @@
}
/*
- * Allocate initial page tables to allow the new CPU to
- * enable the MMU safely. This essentially means a set
- * of our "standard" page tables, with the addition of
- * a 1:1 mapping for the physical address of the kernel.
- */
- pgd = pgd_alloc(&init_mm);
- if (!pgd)
- return -ENOMEM;
-
- if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
- identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
- identity_mapping_add(pgd, __pa(_stext), __pa(_etext));
- identity_mapping_add(pgd, __pa(_sdata), __pa(_edata));
- }
-
- /*
* We need to tell the secondary core where to find
* its stack and the page tables.
*/
secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
- secondary_data.pgdir = virt_to_phys(pgd);
+ secondary_data.pgdir = virt_to_phys(idmap_pgd);
secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
@@ -142,16 +124,6 @@
secondary_data.stack = NULL;
secondary_data.pgdir = 0;
- if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
- identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
- identity_mapping_del(pgd, __pa(_stext), __pa(_etext));
- identity_mapping_del(pgd, __pa(_sdata), __pa(_edata));
- }
-
- pgd_free(&init_mm, pgd);
-
return ret;
}
@@ -550,6 +522,10 @@
local_fiq_disable();
local_irq_disable();
+#ifdef CONFIG_HOTPLUG_CPU
+ platform_cpu_kill(cpu);
+#endif
+
while (1)
cpu_relax();
}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index a8a6682..c8e9385 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -10,8 +10,11 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/smp.h>
#include <linux/jiffies.h>
#include <linux/clockchips.h>
@@ -25,6 +28,7 @@
/* set up by the platform code */
void __iomem *twd_base;
+static struct clk *twd_clk;
static unsigned long twd_timer_rate;
static struct clock_event_device __percpu **twd_evt;
@@ -89,6 +93,52 @@
disable_percpu_irq(clk->irq);
}
+#ifdef CONFIG_CPU_FREQ
+
+/*
+ * Updates clockevent frequency when the cpu frequency changes.
+ * Called on the cpu that is changing frequency with interrupts disabled.
+ */
+static void twd_update_frequency(void *data)
+{
+ twd_timer_rate = clk_get_rate(twd_clk);
+
+ clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+}
+
+static int twd_cpufreq_transition(struct notifier_block *nb,
+ unsigned long state, void *data)
+{
+ struct cpufreq_freqs *freqs = data;
+
+ /*
+ * The twd clock events must be reprogrammed to account for the new
+ * frequency. The timer is local to a cpu, so cross-call to the
+ * changing cpu.
+ */
+ if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
+ smp_call_function_single(freqs->cpu, twd_update_frequency,
+ NULL, 1);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block twd_cpufreq_nb = {
+ .notifier_call = twd_cpufreq_transition,
+};
+
+static int twd_cpufreq_init(void)
+{
+ if (!IS_ERR(twd_clk))
+ return cpufreq_register_notifier(&twd_cpufreq_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ return 0;
+}
+core_initcall(twd_cpufreq_init);
+
+#endif
+
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long count;
@@ -140,6 +190,35 @@
return IRQ_NONE;
}
+static struct clk *twd_get_clock(void)
+{
+ struct clk *clk;
+ int err;
+
+ clk = clk_get_sys("smp_twd", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
+ return clk;
+ }
+
+ err = clk_prepare(clk);
+ if (err) {
+ pr_err("smp_twd: clock failed to prepare: %d\n", err);
+ clk_put(clk);
+ return ERR_PTR(err);
+ }
+
+ err = clk_enable(clk);
+ if (err) {
+ pr_err("smp_twd: clock failed to enable: %d\n", err);
+ clk_unprepare(clk);
+ clk_put(clk);
+ return ERR_PTR(err);
+ }
+
+ return clk;
+}
+
/*
* Setup the local clock events for a CPU.
*/
@@ -165,7 +244,13 @@
}
}
- twd_calibrate_rate();
+ if (!twd_clk)
+ twd_clk = twd_get_clock();
+
+ if (!IS_ERR_OR_NULL(twd_clk))
+ twd_timer_rate = clk_get_rate(twd_clk);
+ else
+ twd_calibrate_rate();
clk->name = "local_timer";
clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
@@ -173,15 +258,11 @@
clk->rating = 350;
clk->set_mode = twd_set_mode;
clk->set_next_event = twd_set_next_event;
- clk->shift = 20;
- clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
- clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
- clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
this_cpu_clk = __this_cpu_ptr(twd_evt);
*this_cpu_clk = clk;
- clockevents_register_device(clk);
-
+ clockevents_config_and_register(clk, twd_timer_rate,
+ 0xf, 0xffffffff);
enable_percpu_irq(clk->irq, 0);
}
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index 93a22d2..1794cc3 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -1,13 +1,12 @@
#include <linux/init.h>
+#include <asm/idmap.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/memory.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
-static pgd_t *suspend_pgd;
-
extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
extern void cpu_resume_mmu(void);
@@ -21,7 +20,7 @@
*save_ptr = virt_to_phys(ptr);
/* This must correspond to the LDM in cpu_resume() assembly */
- *ptr++ = virt_to_phys(suspend_pgd);
+ *ptr++ = virt_to_phys(idmap_pgd);
*ptr++ = sp;
*ptr++ = virt_to_phys(cpu_do_resume);
@@ -42,7 +41,7 @@
struct mm_struct *mm = current->active_mm;
int ret;
- if (!suspend_pgd)
+ if (!idmap_pgd)
return -EINVAL;
/*
@@ -59,14 +58,3 @@
return ret;
}
-
-static int __init cpu_suspend_init(void)
-{
- suspend_pgd = pgd_alloc(&init_mm);
- if (suspend_pgd) {
- unsigned long addr = virt_to_phys(cpu_resume_mmu);
- identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
- }
- return suspend_pgd ? 0 : -ENOMEM;
-}
-core_initcall(cpu_suspend_init);
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 5f452f8..df74518 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -25,6 +25,7 @@
#include <linux/syscalls.h>
#include <linux/perf_event.h>
+#include <asm/opcodes.h>
#include <asm/traps.h>
#include <asm/uaccess.h>
@@ -185,6 +186,21 @@
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
+ res = arm_check_condition(instr, regs->ARM_cpsr);
+ switch (res) {
+ case ARM_OPCODE_CONDTEST_PASS:
+ break;
+ case ARM_OPCODE_CONDTEST_FAIL:
+ /* Condition failed - return to next instruction */
+ regs->ARM_pc += 4;
+ return 0;
+ case ARM_OPCODE_CONDTEST_UNCOND:
+ /* If unconditional encoding - not a SWP, undef */
+ return -EFAULT;
+ default:
+ return -EINVAL;
+ }
+
if (current->pid != previous_pid) {
pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
current->comm, (unsigned long)current->pid);
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
index 30e302d..01ec453 100644
--- a/arch/arm/kernel/tcm.c
+++ b/arch/arm/kernel/tcm.c
@@ -180,9 +180,9 @@
*/
void __init tcm_init(void)
{
- u32 tcm_status = read_cpuid_tcmstatus();
- u8 dtcm_banks = (tcm_status >> 16) & 0x03;
- u8 itcm_banks = (tcm_status & 0x03);
+ u32 tcm_status;
+ u8 dtcm_banks;
+ u8 itcm_banks;
size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data;
size_t itcm_code_sz = &__eitcm_text - &__sitcm_text;
char *start;
@@ -191,6 +191,22 @@
int ret;
int i;
+ /*
+ * Prior to ARMv5 there is no TCM, and trying to read the status
+ * register will hang the processor.
+ */
+ if (cpu_architecture() < CPU_ARCH_ARMv5) {
+ if (dtcm_code_sz || itcm_code_sz)
+ pr_info("CPU TCM: %u bytes of DTCM and %u bytes of "
+ "ITCM code compiled in, but no TCM present "
+ "in pre-v5 CPU\n", dtcm_code_sz, itcm_code_sz);
+ return;
+ }
+
+ tcm_status = read_cpuid_tcmstatus();
+ dtcm_banks = (tcm_status >> 16) & 0x03;
+ itcm_banks = (tcm_status & 0x03);
+
/* Values greater than 2 for D/ITCM banks are "reserved" */
if (dtcm_banks > 2)
dtcm_banks = 0;
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 1040c00..8200dea 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -43,7 +43,7 @@
struct cputopo_arm cpu_topology[NR_CPUS];
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+const struct cpumask *cpu_coregroup_mask(int cpu)
{
return &cpu_topology[cpu].core_sibling;
}
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index e7e8365..00df012 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -67,7 +67,7 @@
struct unwind_ctrl_block {
unsigned long vrs[16]; /* virtual register set */
- unsigned long *insn; /* pointer to the current instructions word */
+ const unsigned long *insn; /* pointer to the current instructions word */
int entries; /* number of entries left to interpret */
int byte; /* current byte number in the instructions word */
};
@@ -83,8 +83,9 @@
PC = 15
};
-extern struct unwind_idx __start_unwind_idx[];
-extern struct unwind_idx __stop_unwind_idx[];
+extern const struct unwind_idx __start_unwind_idx[];
+static const struct unwind_idx *__origin_unwind_idx;
+extern const struct unwind_idx __stop_unwind_idx[];
static DEFINE_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);
@@ -98,45 +99,99 @@
})
/*
- * Binary search in the unwind index. The entries entries are
+ * Binary search in the unwind index. The entries are
* guaranteed to be sorted in ascending order by the linker.
+ *
+ * start = first entry
+ * origin = first entry with positive offset (or stop if there is no such entry)
+ * stop - 1 = last entry
*/
-static struct unwind_idx *search_index(unsigned long addr,
- struct unwind_idx *first,
- struct unwind_idx *last)
+static const struct unwind_idx *search_index(unsigned long addr,
+ const struct unwind_idx *start,
+ const struct unwind_idx *origin,
+ const struct unwind_idx *stop)
{
- pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+ unsigned long addr_prel31;
- if (addr < first->addr) {
- pr_warning("unwind: Unknown symbol address %08lx\n", addr);
- return NULL;
- } else if (addr >= last->addr)
- return last;
+ pr_debug("%s(%08lx, %p, %p, %p)\n",
+ __func__, addr, start, origin, stop);
- while (first < last - 1) {
- struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+ /*
+ * only search in the section with the matching sign. This way the
+ * prel31 numbers can be compared as unsigned longs.
+ */
+ if (addr < (unsigned long)start)
+ /* negative offsets: [start; origin) */
+ stop = origin;
+ else
+ /* positive offsets: [origin; stop) */
+ start = origin;
- if (addr < mid->addr)
- last = mid;
- else
- first = mid;
+ /* prel31 for address relavive to start */
+ addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
+
+ while (start < stop - 1) {
+ const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+ /*
+ * As addr_prel31 is relative to start an offset is needed to
+ * make it relative to mid.
+ */
+ if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
+ mid->addr_offset)
+ stop = mid;
+ else {
+ /* keep addr_prel31 relative to start */
+ addr_prel31 -= ((unsigned long)mid -
+ (unsigned long)start);
+ start = mid;
+ }
}
- return first;
+ if (likely(start->addr_offset <= addr_prel31))
+ return start;
+ else {
+ pr_warning("unwind: Unknown symbol address %08lx\n", addr);
+ return NULL;
+ }
}
-static struct unwind_idx *unwind_find_idx(unsigned long addr)
+static const struct unwind_idx *unwind_find_origin(
+ const struct unwind_idx *start, const struct unwind_idx *stop)
{
- struct unwind_idx *idx = NULL;
+ pr_debug("%s(%p, %p)\n", __func__, start, stop);
+ while (start < stop) {
+ const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+ if (mid->addr_offset >= 0x40000000)
+ /* negative offset */
+ start = mid + 1;
+ else
+ /* positive offset */
+ stop = mid;
+ }
+ pr_debug("%s -> %p\n", __func__, stop);
+ return stop;
+}
+
+static const struct unwind_idx *unwind_find_idx(unsigned long addr)
+{
+ const struct unwind_idx *idx = NULL;
unsigned long flags;
pr_debug("%s(%08lx)\n", __func__, addr);
- if (core_kernel_text(addr))
+ if (core_kernel_text(addr)) {
+ if (unlikely(!__origin_unwind_idx))
+ __origin_unwind_idx =
+ unwind_find_origin(__start_unwind_idx,
+ __stop_unwind_idx);
+
/* main unwind table */
idx = search_index(addr, __start_unwind_idx,
- __stop_unwind_idx - 1);
- else {
+ __origin_unwind_idx,
+ __stop_unwind_idx);
+ } else {
/* module unwind tables */
struct unwind_table *table;
@@ -145,7 +200,8 @@
if (addr >= table->begin_addr &&
addr < table->end_addr) {
idx = search_index(addr, table->start,
- table->stop - 1);
+ table->origin,
+ table->stop);
/* Move-to-front to exploit common traces */
list_move(&table->list, &unwind_tables);
break;
@@ -274,7 +330,7 @@
int unwind_frame(struct stackframe *frame)
{
unsigned long high, low;
- struct unwind_idx *idx;
+ const struct unwind_idx *idx;
struct unwind_ctrl_block ctrl;
/* only go to a higher address on the stack */
@@ -399,7 +455,6 @@
unsigned long text_size)
{
unsigned long flags;
- struct unwind_idx *idx;
struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@@ -408,15 +463,12 @@
if (!tab)
return tab;
- tab->start = (struct unwind_idx *)start;
- tab->stop = (struct unwind_idx *)(start + size);
+ tab->start = (const struct unwind_idx *)start;
+ tab->stop = (const struct unwind_idx *)(start + size);
+ tab->origin = unwind_find_origin(tab->start, tab->stop);
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;
- /* Convert the symbol addresses to absolute values */
- for (idx = tab->start; idx < tab->stop; idx++)
- idx->addr = prel31_to_addr(&idx->addr);
-
spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
spin_unlock_irqrestore(&unwind_lock, flags);
@@ -437,16 +489,3 @@
kfree(tab);
}
-
-int __init unwind_init(void)
-{
- struct unwind_idx *idx;
-
- /* Convert the symbol addresses to absolute values */
- for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
- idx->addr = prel31_to_addr(&idx->addr);
-
- pr_debug("unwind: ARM stack unwinding initialised\n");
-
- return 0;
-}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 20b3041..f76e755 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -13,6 +13,12 @@
*(.proc.info.init) \
VMLINUX_SYMBOL(__proc_info_end) = .;
+#define IDMAP_TEXT \
+ ALIGN_FUNCTION(); \
+ VMLINUX_SYMBOL(__idmap_text_start) = .; \
+ *(.idmap.text) \
+ VMLINUX_SYMBOL(__idmap_text_end) = .;
+
#ifdef CONFIG_HOTPLUG_CPU
#define ARM_CPU_DISCARD(x)
#define ARM_CPU_KEEP(x) x
@@ -92,6 +98,7 @@
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
+ IDMAP_TEXT
#ifdef CONFIG_MMU
*(.fixup)
#endif
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index cf73a7f..0ade0ac 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -13,7 +13,8 @@
testchangebit.o testclearbit.o testsetbit.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o \
- io-readsb.o io-writesb.o io-readsl.o io-writesl.o
+ io-readsb.o io-writesb.o io-readsl.o io-writesl.o \
+ call_with_stack.o
mmu-y := clear_user.o copy_page.o getuser.o putuser.o
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 10d868a..d6408d1 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,5 +1,9 @@
+#include <asm/unwind.h>
+
#if __LINUX_ARM_ARCH__ >= 6
- .macro bitop, instr
+ .macro bitop, name, instr
+ENTRY( \name )
+UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
mov r2, #1
@@ -13,9 +17,13 @@
cmp r0, #0
bne 1b
bx lr
+UNWIND( .fnend )
+ENDPROC(\name )
.endm
- .macro testop, instr, store
+ .macro testop, name, instr, store
+ENTRY( \name )
+UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
mov r2, #1
@@ -34,9 +42,13 @@
cmp r0, #0
movne r0, #1
2: bx lr
+UNWIND( .fnend )
+ENDPROC(\name )
.endm
#else
- .macro bitop, instr
+ .macro bitop, name, instr
+ENTRY( \name )
+UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
and r2, r0, #31
@@ -49,6 +61,8 @@
str r2, [r1, r0, lsl #2]
restore_irqs ip
mov pc, lr
+UNWIND( .fnend )
+ENDPROC(\name )
.endm
/**
@@ -59,7 +73,9 @@
* Note: we can trivially conditionalise the store instruction
* to avoid dirtying the data cache.
*/
- .macro testop, instr, store
+ .macro testop, name, instr, store
+ENTRY( \name )
+UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
and r3, r0, #31
@@ -73,5 +89,7 @@
moveq r0, #0
restore_irqs ip
mov pc, lr
+UNWIND( .fnend )
+ENDPROC(\name )
.endm
#endif
diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S
new file mode 100644
index 0000000..916c80f
--- /dev/null
+++ b/arch/arm/lib/call_with_stack.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/lib/call_with_stack.S
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Written by Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
+ *
+ * Change the stack to that pointed at by sp, then invoke fn(arg) with
+ * the new stack.
+ */
+ENTRY(call_with_stack)
+ str sp, [r2, #-4]!
+ str lr, [r2, #-4]!
+
+ mov sp, r2
+ mov r2, r0
+ mov r0, r1
+
+ adr lr, BSYM(1f)
+ mov pc, r2
+
+1: ldr lr, [sp]
+ ldr sp, [sp, #4]
+ mov pc, lr
+ENDPROC(call_with_stack)
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index 68ed5b6..f402786 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -12,6 +12,4 @@
#include "bitops.h"
.text
-ENTRY(_change_bit)
- bitop eor
-ENDPROC(_change_bit)
+bitop _change_bit, eor
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index 4c04c3b..f6b75fb 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -12,6 +12,4 @@
#include "bitops.h"
.text
-ENTRY(_clear_bit)
- bitop bic
-ENDPROC(_clear_bit)
+bitop _clear_bit, bic
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index bbee5c6..618feda 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -12,6 +12,4 @@
#include "bitops.h"
.text
-ENTRY(_set_bit)
- bitop orr
-ENDPROC(_set_bit)
+bitop _set_bit, orr
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 15a4d43..4becdc3 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -12,6 +12,4 @@
#include "bitops.h"
.text
-ENTRY(_test_and_change_bit)
- testop eor, str
-ENDPROC(_test_and_change_bit)
+testop _test_and_change_bit, eor, str
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 521b66b..918841d 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -12,6 +12,4 @@
#include "bitops.h"
.text
-ENTRY(_test_and_clear_bit)
- testop bicne, strne
-ENDPROC(_test_and_clear_bit)
+testop _test_and_clear_bit, bicne, strne
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 1c98cc2..8d1b2fe 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -12,6 +12,4 @@
#include "bitops.h"
.text
-ENTRY(_test_and_set_bit)
- testop orreq, streq
-ENDPROC(_test_and_set_bit)
+testop _test_and_set_bit, orreq, streq
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index ecdd54d..2937339 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -313,7 +313,7 @@
}
};
-static void at91cap9_reset(void)
+static void at91cap9_restart(char mode, const char *cmd)
{
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
@@ -335,7 +335,7 @@
static void __init at91cap9_initialize(void)
{
- at91_arch_reset = at91cap9_reset;
+ arm_pm_restart = at91cap9_restart;
pm_power_off = at91cap9_poweroff;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 713d3bd..430a9fd 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -288,7 +288,7 @@
}
};
-static void at91rm9200_reset(void)
+static void at91rm9200_restart(char mode, const char *cmd)
{
/*
* Perform a hardware reset with the use of the Watchdog timer.
@@ -309,7 +309,7 @@
static void __init at91rm9200_initialize(void)
{
- at91_arch_reset = at91rm9200_reset;
+ arm_pm_restart = at91rm9200_restart;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 66591fa..ad93068 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index b84a9f6..e76cd49 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -195,9 +195,9 @@
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
- CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
- CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
- CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
@@ -327,7 +327,7 @@
static void __init at91sam9260_initialize(void)
{
- at91_arch_reset = at91sam9_alt_reset;
+ arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9260_poweroff;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 25e3464..629fa97 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 658a518..19ac7c0 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -287,7 +287,7 @@
static void __init at91sam9261_initialize(void)
{
- at91_arch_reset = at91sam9_alt_reset;
+ arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9261_poweroff;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ae78f4d..a178b58 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f83fbb0..50d0163 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -305,7 +305,7 @@
static void __init at91sam9263_initialize(void)
{
- at91_arch_reset = at91sam9_alt_reset;
+ arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9263_poweroff;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ad017eb..d5fbac9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -92,7 +92,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
index e0256de..d3f931c 100644
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -14,20 +14,15 @@
*/
#include <linux/linkage.h>
-#include <asm/system.h>
#include <mach/hardware.h>
#include <mach/at91sam9_sdramc.h>
#include <mach/at91_rstc.h>
.arm
- .globl at91sam9_alt_reset
+ .globl at91sam9_alt_restart
-at91sam9_alt_reset: mrc p15, 0, r0, c1, c0, 0
- orr r0, r0, #CR_I
- mcr p15, 0, r0, c1, c0, 0 @ enable I-cache
-
- ldr r0, .at91_va_base_sdramc @ preload constants
+at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants
ldr r1, .at91_va_base_rstc_cr
mov r2, #1
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 318b040..ff21f7a 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -317,7 +317,7 @@
}
};
-static void at91sam9g45_reset(void)
+static void at91sam9g45_restart(char mode, const char *cmd)
{
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
@@ -340,7 +340,7 @@
static void __init at91sam9g45_initialize(void)
{
- at91_arch_reset = at91sam9g45_reset;
+ arm_pm_restart = at91sam9g45_restart;
pm_power_off = at91sam9g45_poweroff;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index a238105..61cbb46 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -292,7 +292,7 @@
static void __init at91sam9rl_initialize(void)
{
- at91_arch_reset = at91sam9_alt_reset;
+ arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9rl_poweroff;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 938b34f..7f4503b 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -57,7 +57,7 @@
extern void at91_irq_resume(void);
/* reset */
-extern void at91sam9_alt_reset(void);
+extern void at91sam9_alt_restart(char, const char *);
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
@@ -71,5 +71,4 @@
extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
extern void __init at91_gpio_irq_setup(void);
-extern void (*at91_arch_reset)(void);
extern int at91_extern_irq;
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
index 4298e78..4ca09ef 100644
--- a/arch/arm/mach-at91/include/mach/io.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -30,14 +30,6 @@
#ifndef __ASSEMBLY__
-#ifndef CONFIG_ARCH_AT91X40
-#define __arch_ioremap at91_ioremap
-#define __arch_iounmap at91_iounmap
-#endif
-
-void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type);
-void at91_iounmap(volatile void __iomem *addr);
-
static inline unsigned int at91_sys_read(unsigned int reg_offset)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index 36af14b..cbd64f3 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -47,13 +47,4 @@
#endif
}
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* call the CPU-specific reset function */
- if (at91_arch_reset)
- (at91_arch_reset)();
-}
-
#endif
diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
index 8f48660..ec164a4 100644
--- a/arch/arm/mach-at91/include/mach/system_rev.h
+++ b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -19,7 +19,7 @@
#define BOARD_HAVE_NAND_16BIT (1 << 31)
static inline int board_have_nand_16bit(void)
{
- return system_rev & BOARD_HAVE_NAND_16BIT;
+ return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
}
#endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
deleted file mode 100644
index 8e4a1bd..0000000
--- a/arch/arm/mach-at91/include/mach/vmalloc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/vmalloc.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#include <mach/hardware.h>
-
-#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index aa64294..cf98a8f 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -73,24 +73,6 @@
.type = MT_DEVICE,
};
-void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type)
-{
- if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1))
- return (void __iomem *)AT91_IO_P2V(p);
-
- return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(at91_ioremap);
-
-void at91_iounmap(volatile void __iomem *addr)
-{
- unsigned long virt = (unsigned long)addr;
-
- if (virt >= VMALLOC_START && virt < VMALLOC_END)
- __iounmap(addr);
-}
-EXPORT_SYMBOL(at91_iounmap);
-
#define AT91_DBGU0 0xfffff200
#define AT91_DBGU1 0xffffee00
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 31a1435..9e5e755 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -49,7 +49,29 @@
#endif
/* sysctl */
-int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
+static int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
+
+static void bcmring_restart(char mode, const char *cmd)
+{
+ printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+ if (mode == 'h') {
+ /* Reboot configured in proc entry */
+ if (bcmring_arch_warm_reboot) {
+ printk("warm reset\n");
+ /* Issue Warm reset (do not reset ethernet switch, keep alive) */
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+}
static struct ctl_table_header *bcmring_sysctl_header;
@@ -173,4 +195,5 @@
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
.init_machine = bcmring_init_machine
+ .restart = bcmring_restart,
MACHINE_END
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 430da12..6b67b7e 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -25,7 +25,6 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/clkdev.h>
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index f4d4d6d..1a1a27d 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -1615,7 +1615,7 @@
{
unsigned long addrVal = (unsigned long)addr;
- if (addrVal >= VMALLOC_END) {
+ if (addrVal >= CONSISTENT_BASE) {
/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
/* dma_alloc_xxx pages are physically and virtually contiguous */
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index 38b3706..cb78250 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -20,35 +20,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/csp/chipcHw_inline.h>
-
-extern int bcmring_arch_warm_reboot;
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
-
- if (mode == 'h') {
- /* Reboot configured in proc entry */
- if (bcmring_arch_warm_reboot) {
- printk("warm reset\n");
- /* Issue Warm reset (do not reset ethernet switch, keep alive) */
- chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
- } else {
- /* Force reset of everything */
- printk("force reset\n");
- chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
- }
- } else {
- /* Force reset of everything */
- printk("force reset\n");
- chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
- }
-}
-
#endif
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
deleted file mode 100644
index 7397bd7..0000000
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
- * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
- * larger physical memory designs better.
- */
-#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a19731..f2f0256 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := irq.o mm.o time.o
+obj-y := common.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 0276091..3fb79a1 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -68,5 +68,6 @@
.map_io = autcpu12_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 25b3bfd..c314f49 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -59,4 +59,5 @@
.map_io = cdb89712_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 1df9ec6..a70147e 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -60,4 +60,5 @@
.map_io = ceiva_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 80496c0..dbc7842 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -41,5 +41,6 @@
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
new file mode 100644
index 0000000..ab1711b
--- /dev/null
+++ b/arch/arm/mach-clps711x/common.c
@@ -0,0 +1,227 @@
+/*
+ * linux/arch/arm/mach-clps711x/core.c
+ *
+ * Core support for the CLPS711x-based machines.
+ *
+ * Copyright (C) 2001,2011 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/timex.h>
+
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/clps7111.h>
+
+/*
+ * This maps the generic CLPS711x registers
+ */
+static struct map_desc clps711x_io_desc[] __initdata = {
+ {
+ .virtual = CLPS7111_VIRT_BASE,
+ .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
+};
+
+void __init clps711x_map_io(void)
+{
+ iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
+}
+
+static void int1_mask(struct irq_data *d)
+{
+ u32 intmr1;
+
+ intmr1 = clps_readl(INTMR1);
+ intmr1 &= ~(1 << d->irq);
+ clps_writel(intmr1, INTMR1);
+}
+
+static void int1_ack(struct irq_data *d)
+{
+ u32 intmr1;
+
+ intmr1 = clps_readl(INTMR1);
+ intmr1 &= ~(1 << d->irq);
+ clps_writel(intmr1, INTMR1);
+
+ switch (d->irq) {
+ case IRQ_CSINT: clps_writel(0, COEOI); break;
+ case IRQ_TC1OI: clps_writel(0, TC1EOI); break;
+ case IRQ_TC2OI: clps_writel(0, TC2EOI); break;
+ case IRQ_RTCMI: clps_writel(0, RTCEOI); break;
+ case IRQ_TINT: clps_writel(0, TEOI); break;
+ case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
+ }
+}
+
+static void int1_unmask(struct irq_data *d)
+{
+ u32 intmr1;
+
+ intmr1 = clps_readl(INTMR1);
+ intmr1 |= 1 << d->irq;
+ clps_writel(intmr1, INTMR1);
+}
+
+static struct irq_chip int1_chip = {
+ .irq_ack = int1_ack,
+ .irq_mask = int1_mask,
+ .irq_unmask = int1_unmask,
+};
+
+static void int2_mask(struct irq_data *d)
+{
+ u32 intmr2;
+
+ intmr2 = clps_readl(INTMR2);
+ intmr2 &= ~(1 << (d->irq - 16));
+ clps_writel(intmr2, INTMR2);
+}
+
+static void int2_ack(struct irq_data *d)
+{
+ u32 intmr2;
+
+ intmr2 = clps_readl(INTMR2);
+ intmr2 &= ~(1 << (d->irq - 16));
+ clps_writel(intmr2, INTMR2);
+
+ switch (d->irq) {
+ case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
+ }
+}
+
+static void int2_unmask(struct irq_data *d)
+{
+ u32 intmr2;
+
+ intmr2 = clps_readl(INTMR2);
+ intmr2 |= 1 << (d->irq - 16);
+ clps_writel(intmr2, INTMR2);
+}
+
+static struct irq_chip int2_chip = {
+ .irq_ack = int2_ack,
+ .irq_mask = int2_mask,
+ .irq_unmask = int2_unmask,
+};
+
+void __init clps711x_init_irq(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ if (INT1_IRQS & (1 << i)) {
+ irq_set_chip_and_handler(i, &int1_chip,
+ handle_level_irq);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+ if (INT2_IRQS & (1 << i)) {
+ irq_set_chip_and_handler(i, &int2_chip,
+ handle_level_irq);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+
+ /*
+ * Disable interrupts
+ */
+ clps_writel(0, INTMR1);
+ clps_writel(0, INTMR2);
+
+ /*
+ * Clear down any pending interrupts
+ */
+ clps_writel(0, COEOI);
+ clps_writel(0, TC1EOI);
+ clps_writel(0, TC2EOI);
+ clps_writel(0, RTCEOI);
+ clps_writel(0, TEOI);
+ clps_writel(0, UMSEOI);
+ clps_writel(0, SYNCIO);
+ clps_writel(0, KBDEOI);
+}
+
+/*
+ * gettimeoffset() returns time since last timer tick, in usecs.
+ *
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy.
+ */
+static unsigned long clps711x_gettimeoffset(void)
+{
+ unsigned long hwticks;
+ hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */
+ return (hwticks * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ return IRQ_HANDLED;
+}
+
+static struct irqaction clps711x_timer_irq = {
+ .name = "CLPS711x Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = p720t_timer_interrupt,
+};
+
+static void __init clps711x_timer_init(void)
+{
+ struct timespec tv;
+ unsigned int syscon;
+
+ syscon = clps_readl(SYSCON1);
+ syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
+ clps_writel(syscon, SYSCON1);
+
+ clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
+
+ setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = clps_readl(RTCDR);
+ do_settimeofday(&tv);
+}
+
+struct sys_timer clps711x_timer = {
+ .init = clps711x_timer_init,
+ .offset = clps711x_gettimeoffset,
+};
+
+void clps711x_restart(char mode, const char *cmd)
+{
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index 2b8b801..fc0f065 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -9,3 +9,4 @@
extern void clps711x_map_io(void);
extern void clps711x_init_irq(void);
extern struct sys_timer clps711x_timer;
+extern void clps711x_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 9721f61..5fad0b4 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -62,4 +62,5 @@
.reserve = edb7211_reserve,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index d992566..3a3f0b7 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -78,4 +78,5 @@
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index f916cd7..23d6ef8 100644
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -32,9 +32,4 @@
mov r0, r0");
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- cpu_reset(0);
-}
-
#endif
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
deleted file mode 100644
index 467b961..0000000
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-clps711x/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
deleted file mode 100644
index c2eceee..0000000
--- a/arch/arm/mach-clps711x/irq.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/irq.c
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/hardware/clps7111.h>
-
-static void int1_mask(struct irq_data *d)
-{
- u32 intmr1;
-
- intmr1 = clps_readl(INTMR1);
- intmr1 &= ~(1 << d->irq);
- clps_writel(intmr1, INTMR1);
-}
-
-static void int1_ack(struct irq_data *d)
-{
- u32 intmr1;
-
- intmr1 = clps_readl(INTMR1);
- intmr1 &= ~(1 << d->irq);
- clps_writel(intmr1, INTMR1);
-
- switch (d->irq) {
- case IRQ_CSINT: clps_writel(0, COEOI); break;
- case IRQ_TC1OI: clps_writel(0, TC1EOI); break;
- case IRQ_TC2OI: clps_writel(0, TC2EOI); break;
- case IRQ_RTCMI: clps_writel(0, RTCEOI); break;
- case IRQ_TINT: clps_writel(0, TEOI); break;
- case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
- }
-}
-
-static void int1_unmask(struct irq_data *d)
-{
- u32 intmr1;
-
- intmr1 = clps_readl(INTMR1);
- intmr1 |= 1 << d->irq;
- clps_writel(intmr1, INTMR1);
-}
-
-static struct irq_chip int1_chip = {
- .irq_ack = int1_ack,
- .irq_mask = int1_mask,
- .irq_unmask = int1_unmask,
-};
-
-static void int2_mask(struct irq_data *d)
-{
- u32 intmr2;
-
- intmr2 = clps_readl(INTMR2);
- intmr2 &= ~(1 << (d->irq - 16));
- clps_writel(intmr2, INTMR2);
-}
-
-static void int2_ack(struct irq_data *d)
-{
- u32 intmr2;
-
- intmr2 = clps_readl(INTMR2);
- intmr2 &= ~(1 << (d->irq - 16));
- clps_writel(intmr2, INTMR2);
-
- switch (d->irq) {
- case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
- }
-}
-
-static void int2_unmask(struct irq_data *d)
-{
- u32 intmr2;
-
- intmr2 = clps_readl(INTMR2);
- intmr2 |= 1 << (d->irq - 16);
- clps_writel(intmr2, INTMR2);
-}
-
-static struct irq_chip int2_chip = {
- .irq_ack = int2_ack,
- .irq_mask = int2_mask,
- .irq_unmask = int2_unmask,
-};
-
-void __init clps711x_init_irq(void)
-{
- unsigned int i;
-
- for (i = 0; i < NR_IRQS; i++) {
- if (INT1_IRQS & (1 << i)) {
- irq_set_chip_and_handler(i, &int1_chip,
- handle_level_irq);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
- if (INT2_IRQS & (1 << i)) {
- irq_set_chip_and_handler(i, &int2_chip,
- handle_level_irq);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
- }
-
- /*
- * Disable interrupts
- */
- clps_writel(0, INTMR1);
- clps_writel(0, INTMR2);
-
- /*
- * Clear down any pending interrupts
- */
- clps_writel(0, COEOI);
- clps_writel(0, TC1EOI);
- clps_writel(0, TC2EOI);
- clps_writel(0, RTCEOI);
- clps_writel(0, TEOI);
- clps_writel(0, UMSEOI);
- clps_writel(0, SYNCIO);
- clps_writel(0, KBDEOI);
-}
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
deleted file mode 100644
index 9865921..0000000
--- a/arch/arm/mach-clps711x/mm.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/mm.c
- *
- * Generic MM setup for the CLPS711x-based machines.
- *
- * Copyright (C) 2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
- {
- .virtual = CLPS7111_VIRT_BASE,
- .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- }
-};
-
-void __init clps711x_map_io(void)
-{
- iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 6ecea95..42ee8f3 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -93,6 +93,7 @@
.map_io = p720t_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
static int p720t_hw_init(void)
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
deleted file mode 100644
index d581ef0..0000000
--- a/arch/arm/mach-clps711x/time.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/time.c
- *
- * Copyright (C) 2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-#include <asm/mach/time.h>
-
-
-/*
- * gettimeoffset() returns time since last timer tick, in usecs.
- *
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy.
- */
-static unsigned long clps711x_gettimeoffset(void)
-{
- unsigned long hwticks;
- hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */
- return (hwticks * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction clps711x_timer_irq = {
- .name = "CLPS711x Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = p720t_timer_interrupt,
-};
-
-static void __init clps711x_timer_init(void)
-{
- struct timespec tv;
- unsigned int syscon;
-
- syscon = clps_readl(SYSCON1);
- syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
- clps_writel(syscon, SYSCON1);
-
- clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
-
- setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
-
- tv.tv_nsec = 0;
- tv.tv_sec = clps_readl(RTCDR);
- do_settimeofday(&tv);
-}
-
-struct sys_timer clps711x_timer = {
- .init = clps711x_timer_init,
- .offset = clps711x_gettimeoffset,
-};
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 55f7b4b..2c5fb4c 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -26,6 +26,7 @@
#include <linux/mtd/partitions.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -201,5 +202,7 @@
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
.timer = &cns3xxx_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = cns3420_init,
+ .restart = cns3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index fcd2253..4894b8c 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -22,5 +22,6 @@
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
+void cns3xxx_restart(char, const char *);
#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
index d87bfc3..01c57df 100644
--- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
@@ -8,8 +8,6 @@
* published by the Free Software Foundation.
*/
-#include <asm/hardware/entry-macro-gic.S>
-
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
index 4f16c9b..9e56b7d 100644
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ b/arch/arm/mach-cns3xxx/include/mach/system.h
@@ -11,7 +11,6 @@
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
-#include <linux/io.h>
#include <asm/proc-fns.h>
static inline void arch_idle(void)
@@ -23,6 +22,4 @@
cpu_do_idle();
}
-void arch_reset(char mode, const char *cmd);
-
#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
deleted file mode 100644
index 1dd231d..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright 2000 Russell King.
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#define VMALLOC_END 0xd8000000UL
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 0c04678..3645808 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -11,9 +11,9 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/atomic.h>
-#include <mach/system.h>
#include <mach/cns3xxx.h>
#include <mach/pm.h>
+#include "core.h"
void cns3xxx_pwr_clk_en(unsigned int block)
{
@@ -89,7 +89,7 @@
}
EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
-void arch_reset(char mode, const char *cmd)
+void cns3xxx_restart(char mode, const char *cmd)
{
/*
* To reset, we hit the on-board reset register
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 495e313..2db78bd 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,7 +4,7 @@
#
# Common objects
-obj-y := time.o clock.o serial.o io.o psc.o \
+obj-y := time.o clock.o serial.o psc.o \
dma.o usb.o common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 11c3db9..dc1afe5 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -682,4 +682,5 @@
.timer = &davinci_timer,
.init_machine = da830_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1d7d249..f8a682f 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -753,7 +753,7 @@
.num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
.tdm_slots = 2,
.serial_dir = da850_iis_serializer_direction,
- .asp_chan_q = EVENTQ_1,
+ .asp_chan_q = EVENTQ_0,
.version = MCASP_VERSION_2,
.txnumevt = 1,
.rxnumevt = 1,
@@ -1411,4 +1411,5 @@
.timer = &davinci_timer,
.init_machine = da850_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 4e0e707..275341f 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -357,4 +357,5 @@
.timer = &davinci_timer,
.init_machine = dm355_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index ff2d241..e99db28 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -276,4 +276,5 @@
.timer = &davinci_timer,
.init_machine = dm355_leopard_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 1918ae7..346e1de 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -107,7 +107,7 @@
/* UBL (a few copies) plus U-Boot */
.name = "bootloader",
.offset = 0,
- .size = 28 * NAND_BLOCK_SIZE,
+ .size = 30 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
/* U-Boot environment */
@@ -618,5 +618,6 @@
.timer = &davinci_timer,
.init_machine = dm365_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 0cf8abf..a64b49c 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -719,4 +719,5 @@
.timer = &davinci_timer,
.init_machine = davinci_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index e574d7f..6401755 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -564,7 +564,7 @@
int val;
u32 value;
- if (!vpif_vsclkdis_reg || !cpld_client)
+ if (!vpif_vidclkctl_reg || !cpld_client)
return -ENXIO;
val = i2c_smbus_read_byte(cpld_client);
@@ -572,7 +572,7 @@
return val;
spin_lock_irqsave(&vpif_reg_lock, flags);
- value = __raw_readl(vpif_vsclkdis_reg);
+ value = __raw_readl(vpif_vidclkctl_reg);
if (mux_mode) {
val &= VPIF_INPUT_TWO_CHANNEL;
value |= VIDCH1CLK;
@@ -580,7 +580,7 @@
val |= VPIF_INPUT_ONE_CHANNEL;
value &= ~VIDCH1CLK;
}
- __raw_writel(value, vpif_vsclkdis_reg);
+ __raw_writel(value, vpif_vidclkctl_reg);
spin_unlock_irqrestore(&vpif_reg_lock, flags);
err = i2c_smbus_write_byte(cpld_client, val);
@@ -799,6 +799,7 @@
.timer = &davinci_timer,
.init_machine = evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
@@ -808,5 +809,6 @@
.timer = &davinci_timer,
.init_machine = evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 3cfff55..672d820 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -573,4 +573,5 @@
.timer = &davinci_timer,
.init_machine = mityomapl138_init,
.dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index e5f231a..6c4a164 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -278,4 +278,5 @@
.timer = &davinci_timer,
.init_machine = davinci_ntosd2_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index c6701e4..e7c0c7c 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -344,4 +344,5 @@
.timer = &davinci_timer,
.init_machine = omapl138_hawk_init,
.dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5dd4da9..0b136a8 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -157,4 +157,5 @@
.timer = &davinci_timer,
.init_machine = davinci_sffsdr_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index f69e40a..5f14e30 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -283,4 +283,5 @@
.timer = &davinci_timer,
.init_machine = tnetv107x_evm_board_init,
.dma_zone_size = SZ_128M,
+ .restart = tnetv107x_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 865ffe5..cb9b2e4 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -97,9 +97,6 @@
local_flush_tlb_all();
flush_cache_all();
- if (!davinci_soc_info.reset)
- davinci_soc_info.reset = davinci_watchdog_reset;
-
/*
* We want to check CPU revision early for cpu_is_xxxx() macros.
* IO space mapping must be initialized before we can do that.
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index a6bf5dc..deee5c2 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1201,7 +1201,6 @@
.gpio_irq = IRQ_DA8XX_GPIO0,
.serial_dev = &da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
- .reset_device = &da8xx_wdt_device,
};
void __init da830_init(void)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index b047f87..0ed7fdb 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1121,7 +1121,6 @@
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_ARM_RAM_BASE,
.sram_len = SZ_8K,
- .reset_device = &da8xx_wdt_device,
};
void __init da850_init(void)
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 68def71..42dbf3d 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -363,6 +363,11 @@
.resource = da8xx_watchdog_resources,
};
+void da8xx_restart(char mode, const char *cmd)
+{
+ davinci_watchdog_reset(&da8xx_wdt_device);
+}
+
int __init da8xx_register_watchdog(void)
{
return platform_device_register(&da8xx_wdt_device);
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 806a2f0..50c0156 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -291,6 +291,11 @@
.resource = wdt_resources,
};
+void davinci_restart(char mode, const char *cmd)
+{
+ davinci_watchdog_reset(&davinci_wdt_device);
+}
+
static void davinci_init_wdt(void)
{
platform_device_register(&davinci_wdt_device);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index fe520d4..19667cf 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -853,7 +853,6 @@
.serial_dev = &dm355_serial_device,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
- .reset_device = &davinci_wdt_device,
};
void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 679e168..f15b435 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1083,7 +1083,6 @@
.emac_pdata = &dm365_emac_pdata,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
- .reset_device = &davinci_wdt_device,
};
void __init dm365_init_asp(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 3470983..0800f9c 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -767,7 +767,6 @@
.emac_pdata = &dm644x_emac_pdata,
.sram_dma = 0x00008000,
.sram_len = SZ_16K,
- .reset_device = &davinci_wdt_device,
};
void __init dm644x_init_asp(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 0b68ed5..00f7743 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -161,7 +161,6 @@
.name = "dsp",
.parent = &pll1_sysclk1,
.lpsc = DM646X_LPSC_C64X_CPU,
- .flags = PSC_DSP,
.usecount = 1, /* REVISIT how to disable? */
};
@@ -855,7 +854,6 @@
.emac_pdata = &dm646x_emac_pdata,
.sram_dma = 0x10010000,
.sram_len = SZ_32K,
- .reset_device = &davinci_wdt_device,
};
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a57cba2..5cd39a4 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -77,14 +77,13 @@
struct emac_platform_data *emac_pdata;
dma_addr_t sram_dma;
unsigned sram_len;
- struct platform_device *reset_device;
- void (*reset)(struct platform_device *);
};
extern struct davinci_soc_info davinci_soc_info;
extern void davinci_common_init(struct davinci_soc_info *soc_info);
extern void davinci_init_ide(void);
+void davinci_restart(char mode, const char *cmd);
/* standard place to map on-chip SRAMs; they *may* support DMA */
#define SRAM_VIRT 0xfffe0000
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index eaca7d8..ee3461d 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -91,6 +91,7 @@
void __iomem * __init da8xx_get_mem_ctlr(void);
int da850_register_pm(struct platform_device *pdev);
int __init da850_register_sata(unsigned long refclkpn);
+void da8xx_restart(char mode, const char *cmd);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index d1b9549..b2267d1 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -21,12 +21,4 @@
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
-#ifndef __ASSEMBLER__
-#define __arch_ioremap davinci_ioremap
-#define __arch_iounmap davinci_iounmap
-
-void __iomem *davinci_ioremap(unsigned long phys, size_t size,
- unsigned int type);
-void davinci_iounmap(volatile void __iomem *addr);
-#endif
#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index fa59c09..8bc3fc2 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -233,7 +233,7 @@
#define PTCMD 0x120
#define PTSTAT 0x128
#define PDSTAT 0x200
-#define PDCTL1 0x304
+#define PDCTL 0x300
#define MDSTAT 0x800
#define MDCTL 0xA00
@@ -244,7 +244,10 @@
#define PSC_STATE_ENABLE 3
#define MDSTAT_STATE_MASK 0x3f
+#define PDSTAT_STATE_MASK 0x1f
#define MDCTL_FORCE BIT(31)
+#define PDCTL_NEXT BIT(1)
+#define PDCTL_EPCGOOD BIT(8)
#ifndef __ASSEMBLER__
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index e65629c..fcb7a01 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -18,10 +18,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (davinci_soc_info.reset)
- davinci_soc_info.reset(davinci_soc_info.reset_device);
-}
-
#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 89c1fdc..83e5926 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -54,6 +54,7 @@
extern void __init tnetv107x_init(void);
extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
extern void __init tnetv107x_irq_init(void);
+void tnetv107x_restart(char mode, const char *cmd);
#endif
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
deleted file mode 100644
index d49646a..0000000
--- a/arch/arm/mach-davinci/include/mach/vmalloc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <mach/hardware.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
deleted file mode 100644
index 8ea60a8b..0000000
--- a/arch/arm/mach-davinci/io.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * DaVinci I/O mapping code
- *
- * Copyright (C) 2005-2006 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/tlb.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
-{
- struct map_desc *desc = davinci_soc_info.io_desc;
- int desc_num = davinci_soc_info.io_desc_num;
- int i;
-
- for (i = 0; i < desc_num; i++, desc++) {
- unsigned long iophys = __pfn_to_phys(desc->pfn);
- unsigned long iosize = desc->length;
-
- if (p >= iophys && (p + size) <= (iophys + iosize))
- return __io(desc->virtual + p - iophys);
- }
-
- return __arm_ioremap_caller(p, size, type,
- __builtin_return_address(0));
-}
-EXPORT_SYMBOL(davinci_ioremap);
-
-void davinci_iounmap(volatile void __iomem *addr)
-{
- unsigned long virt = (unsigned long)addr;
-
- if (virt >= VMALLOC_START && virt < VMALLOC_END)
- __iounmap(addr);
-}
-EXPORT_SYMBOL(davinci_iounmap);
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1fb6bdf..d7e210f 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -52,7 +52,7 @@
void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, bool enable, u32 flags)
{
- u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+ u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
void __iomem *psc_base;
struct davinci_soc_info *soc_info = &davinci_soc_info;
u32 next_state = PSC_STATE_ENABLE;
@@ -79,11 +79,11 @@
mdctl |= MDCTL_FORCE;
__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
- pdstat = __raw_readl(psc_base + PDSTAT);
- if ((pdstat & 0x00000001) == 0) {
- pdctl1 = __raw_readl(psc_base + PDCTL1);
- pdctl1 |= 0x1;
- __raw_writel(pdctl1, psc_base + PDCTL1);
+ pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
+ if ((pdstat & PDSTAT_STATE_MASK) == 0) {
+ pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+ pdctl |= PDCTL_NEXT;
+ __raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
ptcmd = 1 << domain;
__raw_writel(ptcmd, psc_base + PTCMD);
@@ -92,9 +92,9 @@
epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
- pdctl1 = __raw_readl(psc_base + PDCTL1);
- pdctl1 |= 0x100;
- __raw_writel(pdctl1, psc_base + PDCTL1);
+ pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+ pdctl |= PDCTL_EPCGOOD;
+ __raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
} else {
ptcmd = 1 << domain;
__raw_writel(ptcmd, psc_base + PTCMD);
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 409bb86..dc1a209 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -730,6 +730,11 @@
__raw_writel(1, ®s->kick);
}
+void tnetv107x_restart(char mode, const char *cmd)
+{
+ tnetv107x_watchdog_reset(&tnetv107x_wdt_device);
+}
+
static struct davinci_soc_info tnetv107x_soc_info = {
.io_desc = io_desc,
.io_desc_num = ARRAY_SIZE(io_desc),
@@ -752,8 +757,6 @@
.gpio_num = TNETV107X_N_GPIO,
.timer_info = &timer_info,
.serial_dev = &tnetv107x_serial_device,
- .reset = tnetv107x_watchdog_reset,
- .reset_device = &tnetv107x_wdt_device,
};
void __init tnetv107x_init(void)
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index c8a406f..792b4e2 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -93,4 +93,5 @@
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
+ .restart = dove_restart,
MACHINE_END
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index a9e0dae..13bb236 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -292,3 +292,19 @@
dove_xor0_init();
dove_xor1_init();
}
+
+void dove_restart(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 6a2046e..4202730 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -39,5 +39,6 @@
void dove_i2c_init(void);
void dove_sdio0_init(void);
void dove_sdio1_init(void);
+void dove_restart(char, const char *);
#endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 11ea34e..ea77ae4 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -100,4 +100,5 @@
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
+ .restart = dove_restart,
MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index b20ec9a..ad1165d 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -11,8 +11,6 @@
#ifndef __ASM_ARCH_DOVE_H
#define __ASM_ARCH_DOVE_H
-#include <mach/vmalloc.h>
-
/*
* Marvell Dove address maps.
*
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
index 356afda..3027954 100644
--- a/arch/arm/mach-dove/include/mach/system.h
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -9,28 +9,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/bridge-regs.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
#endif
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
deleted file mode 100644
index a28792c..0000000
--- a/arch/arm/mach-dove/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfd800000UL
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index d0ce8ab..294aad0 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -278,13 +278,19 @@
arch_initcall(ebsa110_init);
+static void ebsa110_restart(char mode, const char *cmd)
+{
+ soft_restart(0x80000000);
+}
+
MACHINE_START(EBSA110, "EBSA110")
/* Maintainer: Russell King */
.atag_offset = 0x400,
.reserve_lp0 = 1,
.reserve_lp2 = 1,
- .soft_reboot = 1,
+ .restart_mode = 's',
.map_io = ebsa110_map_io,
.init_irq = ebsa110_init_irq,
.timer = &ebsa110_timer,
+ .restart = ebsa110_restart,
MACHINE_END
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
index 9a26245..2e4af65 100644
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -34,6 +34,4 @@
asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
}
-#define arch_reset(mode, cmd) cpu_reset(0x80000000)
-
#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
deleted file mode 100644
index ea141b7a..0000000
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/vmalloc.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END 0xdf000000UL
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 0713448..681e939 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -16,6 +16,7 @@
#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -36,6 +37,8 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = adssphere_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 2432a6b..24203f9 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -906,3 +906,15 @@
platform_device_register(&ep93xx_ohci_device);
platform_device_register(&ep93xx_leds);
}
+
+void ep93xx_restart(char mode, const char *cmd)
+{
+ /*
+ * Set then clear the SWRST bit to initiate a software reset
+ */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 70ef8c5..d115653 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -39,6 +39,7 @@
#include <mach/ep93xx_spi.h>
#include <mach/gpio-ep93xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -250,8 +251,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -261,8 +264,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -272,8 +277,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -283,8 +290,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -294,8 +303,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -305,8 +316,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -316,8 +329,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -327,7 +342,9 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 45ee205..af46970 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -16,6 +16,7 @@
#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -36,6 +37,8 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = gesbc9312_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
index 96b85e2..9be6edc 100644
--- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -9,51 +9,9 @@
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
-#include <mach/ep93xx-regs.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =(EP93XX_AHB_VIRT_BASE)
- orr \base, \base, #0x000b0000
- mov \irqnr, #0
- ldr \irqstat, [\base] @ lower 32 interrupts
- cmp \irqstat, #0
- bne 1001f
-
- eor \base, \base, #0x00070000
- ldr \irqstat, [\base] @ upper 32 interrupts
- cmp \irqstat, #0
- beq 1002f
- mov \irqnr, #0x20
-
-1001:
- movs \tmp, \irqstat, lsl #16
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
-
- movs \tmp, \irqstat, lsl #8
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #8
-
- movs \tmp, \irqstat, lsl #4
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #4
-
- movs \tmp, \irqstat, lsl #2
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #2
-
- movs \tmp, \irqstat, lsl #1
- addeq \irqnr, \irqnr, #1
- orrs \base, \base, #1
-
-1002:
- .endm
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 5066045..d4c9349 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -66,4 +66,6 @@
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
+void ep93xx_restart(char, const char *);
+
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index 6d661fe..b5bec7c 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -1,24 +1,7 @@
/*
* arch/arm/mach-ep93xx/include/mach/system.h
*/
-
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- local_irq_disable();
-
- /*
- * Set then clear the SWRST bit to initiate a software reset
- */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
deleted file mode 100644
index 1b3f25d..0000000
--- a/arch/arm/mach-ep93xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe800000UL
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index e72f736..7b98084 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -18,6 +18,7 @@
#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -80,8 +81,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -91,8 +94,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -102,8 +107,10 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -113,7 +120,9 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 52e090d..f4e553e 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -25,6 +25,7 @@
#include <mach/fb.h>
#include <mach/gpio-ep93xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -80,6 +81,8 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = simone_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 8121e3a..fd84633 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -31,6 +31,7 @@
#include <mach/fb.h>
#include <mach/gpio-ep93xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -177,6 +178,8 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = snappercl15_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 8b2f143..79f8ecf 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -23,6 +23,7 @@
#include <mach/hardware.h>
#include <mach/ts72xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
@@ -247,6 +248,8 @@
.atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = ts72xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index d96e4db..03dd401 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -361,4 +361,5 @@
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = vision_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f..e1efbca 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,8 @@
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 SoCs based systems
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 59069a3..bcb9efc 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -10,15 +10,17 @@
obj-n :=
obj- :=
-# Core support for EXYNOS4 system
+# Core
-obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += common.o clock.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
+
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_ARCH_EXYNOS4) += dma.o pmu.o
+
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_EXYNOS4_MCT) += mct.o
@@ -45,6 +47,7 @@
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
+obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index b9d5ef6..a5823a7 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -23,7 +23,6 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/hardware.h>
@@ -31,6 +30,8 @@
#include <mach/regs-clock.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 77d5dec..26a668b 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -23,7 +23,6 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/hardware.h>
@@ -31,6 +30,8 @@
#include <mach/regs-clock.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 2894f0a..83616a0 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -21,7 +21,6 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/map.h>
@@ -29,6 +28,8 @@
#include <mach/sysmmu.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
new file mode 100644
index 0000000..b6ac6ee
--- /dev/null
+++ b/arch/arm/mach-exynos/common.c
@@ -0,0 +1,714 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Codes for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/serial_core.h>
+
+#include <asm/proc-fns.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/fimc-core.h>
+#include <plat/iic-core.h>
+#include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+unsigned int gic_bank_offset __read_mostly;
+
+static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = EXYNOS4210_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4210,
+ }, {
+ .idcode = EXYNOS4212_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4212,
+ }, {
+ .idcode = EXYNOS4412_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4412,
+ },
+};
+
+/* Initial IO mappings */
+
+static struct map_desc exynos_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
+ .length = SZ_128K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_L2CC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO1,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO2,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO3,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC0,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void exynos_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+void exynos4_restart(char mode, const char *cmd)
+{
+ __raw_writel(0x1, S5P_SWRESET);
+}
+
+/*
+ * exynos_map_io
+ *
+ * register the standard cpu IO areas
+ */
+
+void __init exynos_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init exynos4_map_io(void)
+{
+ iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
+ /* initialize device information early */
+ exynos4_default_sdhci0();
+ exynos4_default_sdhci1();
+ exynos4_default_sdhci2();
+ exynos4_default_sdhci3();
+
+ s3c_adc_setname("samsung-adc-v3");
+
+ s3c_fimc_setname(0, "exynos4-fimc");
+ s3c_fimc_setname(1, "exynos4-fimc");
+ s3c_fimc_setname(2, "exynos4-fimc");
+ s3c_fimc_setname(3, "exynos4-fimc");
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
+
+ s5p_fb_setname(0, "exynos4-fb");
+ s5p_hdmi_setname("exynos4-hdmi");
+}
+
+void __init exynos4_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+
+ if (soc_is_exynos4210())
+ exynos4210_register_clocks();
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4212_register_clocks();
+
+ exynos4_register_clocks();
+ exynos4_setup_clocks();
+}
+
+#define COMBINER_ENABLE_SET 0x0
+#define COMBINER_ENABLE_CLEAR 0x4
+#define COMBINER_INT_STATUS 0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+ unsigned int irq_offset;
+ unsigned int irq_mask;
+ void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+ struct combiner_chip_data *combiner_data =
+ irq_data_get_irq_chip_data(data);
+
+ return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->irq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->irq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ unsigned int cascade_irq, combiner_irq;
+ unsigned long status;
+
+ chained_irq_enter(chip, desc);
+
+ spin_lock(&irq_controller_lock);
+ status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+ spin_unlock(&irq_controller_lock);
+ status &= chip_data->irq_mask;
+
+ if (status == 0)
+ goto out;
+
+ combiner_irq = __ffs(status);
+
+ cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+ if (unlikely(cascade_irq >= NR_IRQS))
+ do_bad_IRQ(cascade_irq, desc);
+ else
+ generic_handle_irq(cascade_irq);
+
+ out:
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+ .name = "COMBINER",
+ .irq_mask = combiner_mask_irq,
+ .irq_unmask = combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+ if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+ BUG();
+ irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+ unsigned int irq_start)
+{
+ unsigned int i;
+
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+
+ combiner_data[combiner_nr].base = base;
+ combiner_data[combiner_nr].irq_offset = irq_start;
+ combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+ /* Disable all interrupts */
+
+ __raw_writel(combiner_data[combiner_nr].irq_mask,
+ base + COMBINER_ENABLE_CLEAR);
+
+ /* Setup the Linux IRQ subsystem */
+
+ for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+ + MAX_IRQ_IN_COMBINER; i++) {
+ irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
+ irq_set_chip_data(i, &combiner_data[combiner_nr]);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+}
+
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
+{
+ struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+ gic_data->cpu_base = S5P_VA_GIC_CPU +
+ (gic_bank_offset * smp_processor_id());
+
+ gic_data->dist_base = S5P_VA_GIC_DIST +
+ (gic_bank_offset * smp_processor_id());
+}
+
+void __init exynos4_init_irq(void)
+{
+ int irq;
+
+ gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+
+ for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /*
+ * The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because EXYNOS4
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
+struct bus_type exynos4_subsys = {
+ .name = "exynos4-core",
+ .dev_name = "exynos4-core",
+};
+
+static struct device exynos4_dev = {
+ .bus = &exynos4_subsys,
+};
+
+static int __init exynos4_core_init(void)
+{
+ return subsys_system_register(&exynos4_subsys, NULL);
+}
+core_initcall(exynos4_core_init);
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init exynos4_l2x0_cache_init(void)
+{
+ /* TAG, Data Latency Control: 2cycle */
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+
+ if (soc_is_exynos4210())
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ /* L2X0 Prefetch Control */
+ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+ /* L2X0 Power Control */
+ __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+ S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+ l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+
+ return 0;
+}
+
+early_initcall(exynos4_l2x0_cache_init);
+#endif
+
+int __init exynos_init(void)
+{
+ printk(KERN_INFO "EXYNOS: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = exynos_idle;
+
+ return device_register(&exynos4_dev);
+}
+
+static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
+ [0] = {
+ .name = "uclk1",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+
+void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->has_fracval = 1;
+ tcfg->clocks = exynos4_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
+ }
+ tcfg->flags |= NO_NEED_CHECK_CLKSRC;
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int exynos4_get_irq_nr(unsigned int number)
+{
+ u32 ret = 0;
+
+ switch (number) {
+ case 0 ... 3:
+ ret = (number + IRQ_EINT0);
+ break;
+ case 4 ... 7:
+ ret = (number + (IRQ_EINT4 - 4));
+ break;
+ case 8 ... 15:
+ ret = (number + (IRQ_EINT8 - 8));
+ break;
+ default:
+ printk(KERN_ERR "number available : %d\n", number);
+ }
+
+ return ret;
+}
+
+static inline void exynos4_irq_eint_mask(struct irq_data *data)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask |= eint_irq_to_bit(data->irq);
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+}
+
+static void exynos4_irq_eint_unmask(struct irq_data *data)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask &= ~(eint_irq_to_bit(data->irq));
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+}
+
+static inline void exynos4_irq_eint_ack(struct irq_data *data)
+{
+ __raw_writel(eint_irq_to_bit(data->irq),
+ S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void exynos4_irq_eint_maskack(struct irq_data *data)
+{
+ exynos4_irq_eint_mask(data);
+ exynos4_irq_eint_ack(data);
+}
+
+static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = EINT_OFFSET(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs & 0x7) * 4;
+ mask = 0x7 << shift;
+
+ spin_lock(&eint_lock);
+ ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+
+ switch (offs) {
+ case 0 ... 7:
+ s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+ break;
+ case 8 ... 15:
+ s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+ break;
+ case 16 ... 23:
+ s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+ break;
+ case 24 ... 31:
+ s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+ break;
+ default:
+ printk(KERN_ERR "No such irq number %d", offs);
+ }
+
+ return 0;
+}
+
+static struct irq_chip exynos4_irq_eint = {
+ .name = "exynos4-eint",
+ .irq_mask = exynos4_irq_eint_mask,
+ .irq_unmask = exynos4_irq_eint_unmask,
+ .irq_mask_ack = exynos4_irq_eint_maskack,
+ .irq_ack = exynos4_irq_eint_ack,
+ .irq_set_type = exynos4_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .irq_set_wake = s3c_irqext_wake,
+#endif
+};
+
+/*
+ * exynos4_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void exynos4_irq_demux_eint(unsigned int start)
+{
+ unsigned int irq;
+
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+ u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+ status &= ~mask;
+ status &= 0xff;
+
+ while (status) {
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
+ status &= ~(1 << irq);
+ }
+}
+
+static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
+ exynos4_irq_demux_eint(IRQ_EINT(16));
+ exynos4_irq_demux_eint(IRQ_EINT(24));
+ chained_irq_exit(chip, desc);
+}
+
+static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+ u32 *irq_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+
+ chained_irq_enter(chip, desc);
+ chip->irq_mask(&desc->irq_data);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ generic_handle_irq(*irq_data);
+
+ chip->irq_unmask(&desc->irq_data);
+ chained_irq_exit(chip, desc);
+}
+
+int __init exynos4_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = 0 ; irq <= 31 ; irq++) {
+ irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+ handle_level_irq);
+ set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+ }
+
+ irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+
+ for (irq = 0 ; irq <= 15 ; irq++) {
+ eint0_15_data[irq] = IRQ_EINT(irq);
+
+ irq_set_handler_data(exynos4_get_irq_nr(irq),
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos4_get_irq_nr(irq),
+ exynos4_irq_eint0_15);
+ }
+
+ return 0;
+}
+arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
new file mode 100644
index 0000000..1ac49de
--- /dev/null
+++ b/arch/arm/mach-exynos/common.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for EXYNOS machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
+#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+
+void exynos_init_io(struct map_desc *mach_desc, int size);
+void exynos4_init_irq(void);
+
+void exynos4_register_clocks(void);
+void exynos4_setup_clocks(void);
+
+void exynos4210_register_clocks(void);
+void exynos4212_register_clocks(void);
+
+void exynos4_restart(char mode, const char *cmd);
+
+extern struct sys_timer exynos4_timer;
+
+#ifdef CONFIG_ARCH_EXYNOS
+extern int exynos_init(void);
+extern void exynos4_map_io(void);
+extern void exynos4_init_clocks(int xtal);
+extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define exynos4_init_clocks NULL
+#define exynos4_init_uarts NULL
+#define exynos4_map_io NULL
+#define exynos_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
deleted file mode 100644
index 90ec247..0000000
--- a/arch/arm/mach-exynos/cpu.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/* linux/arch/arm/mach-exynos/cpu.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/adc-core.h>
-#include <plat/sdhci.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/reset.h>
-#include <plat/tv-core.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
-
-unsigned int gic_bank_offset __read_mostly;
-
-extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start);
-extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
-
-/* Initial IO mappings */
-static struct map_desc exynos_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS_PA_PMU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
- .pfn = __phys_to_pfn(EXYNOS_PA_COMBINER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_CPU,
- .pfn = __phys_to_pfn(EXYNOS_PA_GIC_CPU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_DIST,
- .pfn = __phys_to_pfn(EXYNOS_PA_GIC_DIST),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
- .length = SZ_128K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
- .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
- .length = SZ_8K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_L2CC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO1,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO2,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO3,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
- .length = SZ_256,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_DMC0,
- .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void exynos_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
-static void exynos4_sw_reset(void)
-{
- __raw_writel(0x1, S5P_SWRESET);
-}
-
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-void __init exynos4_map_io(void)
-{
- iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
- iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
- if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
- iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
- else
- iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
- /* initialize device information early */
- exynos4_default_sdhci0();
- exynos4_default_sdhci1();
- exynos4_default_sdhci2();
- exynos4_default_sdhci3();
-
- s3c_adc_setname("samsung-adc-v3");
-
- s3c_fimc_setname(0, "exynos4-fimc");
- s3c_fimc_setname(1, "exynos4-fimc");
- s3c_fimc_setname(2, "exynos4-fimc");
- s3c_fimc_setname(3, "exynos4-fimc");
-
- /* The I2C bus controllers are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
- s3c_i2c2_setname("s3c2440-i2c");
-
- s5p_fb_setname(0, "exynos4-fb");
- s5p_hdmi_setname("exynos4-hdmi");
-}
-
-void __init exynos4_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- if (soc_is_exynos4210())
- exynos4210_register_clocks();
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- exynos4212_register_clocks();
-
- exynos4_register_clocks();
- exynos4_setup_clocks();
-}
-
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
- struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
- gic_data->cpu_base = S5P_VA_GIC_CPU +
- (gic_bank_offset * smp_processor_id());
-
- gic_data->dist_base = S5P_VA_GIC_DIST +
- (gic_bank_offset * smp_processor_id());
-}
-
-void __init exynos4_init_irq(void)
-{
- int irq;
-
- gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
- gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
- gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
- gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
-
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
-
- combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
- COMBINER_IRQ(irq, 0));
- combiner_cascade_irq(irq, IRQ_SPI(irq));
- }
-
- /* The parameters of s5p_init_irq() are for VIC init.
- * Theses parameters should be NULL and 0 because EXYNOS4
- * uses GIC instead of VIC.
- */
- s5p_init_irq(NULL, 0);
-}
-
-struct sysdev_class exynos4_sysclass = {
- .name = "exynos4-core",
-};
-
-static struct sys_device exynos4_sysdev = {
- .cls = &exynos4_sysclass,
-};
-
-static int __init exynos4_core_init(void)
-{
- return sysdev_class_register(&exynos4_sysclass);
-}
-core_initcall(exynos4_core_init);
-
-#ifdef CONFIG_CACHE_L2X0
-static int __init exynos4_l2x0_cache_init(void)
-{
- /* TAG, Data Latency Control: 2cycle */
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-
- if (soc_is_exynos4210())
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
- /* L2X0 Prefetch Control */
- __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
- /* L2X0 Power Control */
- __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
- S5P_VA_L2CC + L2X0_POWER_CTRL);
-
- l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
-
- return 0;
-}
-
-early_initcall(exynos4_l2x0_cache_init);
-#endif
-
-int __init exynos_init(void)
-{
- printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = exynos_idle;
-
- /* set sw_reset function */
- if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
- s5p_reset_hook = exynos4_sw_reset;
-
- return sysdev_register(&exynos4_sysdev);
-}
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 35f6502..4ebb382 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/cpuidle.h>
#include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
#include <asm/proc-fns.h>
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index f5e9fd8..3ba4f54 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -9,83 +9,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- mov \tmp, #0
-
- mrc p15, 0, \base, c0, c0, 5
- and \base, \base, #3
- cmp \base, #0
- beq 1f
-
- ldr \tmp, =gic_bank_offset
- ldr \tmp, [\tmp]
- cmp \base, #1
- beq 1f
-
- cmp \base, #2
- addeq \tmp, \tmp, \tmp
- addne \tmp, \tmp, \tmp, LSL #1
-
-1: ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- add \base, \base, \tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
- ldr \tmp, =1021
-
- bic \irqnr, \irqstat, #0x1c00
-
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
- addne \irqnr, \irqnr, #32
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 058541d..d182986 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -149,7 +149,6 @@
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
#define S3C_PA_UART EXYNOS4_PA_UART
-#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
@@ -166,26 +165,17 @@
#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
#define S5P_PA_SDO EXYNOS4_PA_SDO
#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC EXYNOS4_PA_SROMC
-#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER EXYNOS4_PA_TIMER
#define S5P_PA_VP EXYNOS4_PA_VP
#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
-#define EXYNOS_PA_COMBINER EXYNOS4_PA_COMBINER
-#define EXYNOS_PA_GIC_CPU EXYNOS4_PA_GIC_CPU
-#define EXYNOS_PA_GIC_DIST EXYNOS4_PA_GIC_DIST
-#define EXYNOS_PA_PMU EXYNOS4_PA_PMU
-#define EXYNOS_PA_SYSTIMER EXYNOS4_PA_SYSTIMER
-
/* Compatibility UART */
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_PA_UART0 S5P_PA_UART(0)
#define S5P_PA_UART1 S5P_PA_UART(1)
#define S5P_PA_UART2 S5P_PA_UART(2)
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
index 5e3220c..0063a6d 100644
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ b/arch/arm/mach-exynos/include/mach/system.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/system-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
diff --git a/arch/arm/mach-exynos/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h
deleted file mode 100644
index 284330e..0000000
--- a/arch/arm/mach-exynos/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-exynos/init.c b/arch/arm/mach-exynos/init.c
deleted file mode 100644
index a8a83e3..0000000
--- a/arch/arm/mach-exynos/init.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-exynos4/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
- [0] = {
- .name = "uclk1",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->has_fracval = 1;
- tcfg->clocks = exynos4_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
- }
- tcfg->flags |= NO_NEED_CHECK_CLKSRC;
- }
-
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-exynos/irq-combiner.c b/arch/arm/mach-exynos/irq-combiner.c
deleted file mode 100644
index 5a2758a..0000000
--- a/arch/arm/mach-exynos/irq-combiner.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-combiner.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/common/gic.c
- *
- * IRQ COMBINER support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#define COMBINER_ENABLE_SET 0x0
-#define COMBINER_ENABLE_CLEAR 0x4
-#define COMBINER_INT_STATUS 0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
- unsigned int irq_offset;
- unsigned int irq_mask;
- void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
- struct combiner_chip_data *combiner_data =
- irq_data_get_irq_chip_data(data);
-
- return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->irq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->irq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
- struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
- unsigned int cascade_irq, combiner_irq;
- unsigned long status;
-
- chained_irq_enter(chip, desc);
-
- spin_lock(&irq_controller_lock);
- status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
- spin_unlock(&irq_controller_lock);
- status &= chip_data->irq_mask;
-
- if (status == 0)
- goto out;
-
- combiner_irq = __ffs(status);
-
- cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
- if (unlikely(cascade_irq >= NR_IRQS))
- do_bad_IRQ(cascade_irq, desc);
- else
- generic_handle_irq(cascade_irq);
-
- out:
- chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
- .name = "COMBINER",
- .irq_mask = combiner_mask_irq,
- .irq_unmask = combiner_unmask_irq,
-};
-
-void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
- if (combiner_nr >= MAX_COMBINER_NR)
- BUG();
- if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
- BUG();
- irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start)
-{
- unsigned int i;
-
- if (combiner_nr >= MAX_COMBINER_NR)
- BUG();
-
- combiner_data[combiner_nr].base = base;
- combiner_data[combiner_nr].irq_offset = irq_start;
- combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
- /* Disable all interrupts */
-
- __raw_writel(combiner_data[combiner_nr].irq_mask,
- base + COMBINER_ENABLE_CLEAR);
-
- /* Setup the Linux IRQ subsystem */
-
- for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
- + MAX_IRQ_IN_COMBINER; i++) {
- irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
- irq_set_chip_data(i, &combiner_data[combiner_nr]);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
-}
diff --git a/arch/arm/mach-exynos/irq-eint.c b/arch/arm/mach-exynos/irq-eint.c
deleted file mode 100644
index badb8c6..0000000
--- a/arch/arm/mach-exynos/irq-eint.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-eint.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-
-#include <plat/pm.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-
-#include <asm/mach/irq.h>
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
- u32 ret = 0;
-
- switch (number) {
- case 0 ... 3:
- ret = (number + IRQ_EINT0);
- break;
- case 4 ... 7:
- ret = (number + (IRQ_EINT4 - 4));
- break;
- case 8 ... 15:
- ret = (number + (IRQ_EINT8 - 8));
- break;
- default:
- printk(KERN_ERR "number available : %d\n", number);
- }
-
- return ret;
-}
-
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-}
-
-static void exynos4_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-}
-
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void exynos4_irq_eint_maskack(struct irq_data *data)
-{
- exynos4_irq_eint_mask(data);
- exynos4_irq_eint_ack(data);
-}
-
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = EINT_OFFSET(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_IRQ_TYPE_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs & 0x7) * 4;
- mask = 0x7 << shift;
-
- spin_lock(&eint_lock);
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-
- switch (offs) {
- case 0 ... 7:
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
- break;
- case 8 ... 15:
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
- break;
- case 16 ... 23:
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
- break;
- case 24 ... 31:
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
- break;
- default:
- printk(KERN_ERR "No such irq number %d", offs);
- }
-
- return 0;
-}
-
-static struct irq_chip exynos4_irq_eint = {
- .name = "exynos4-eint",
- .irq_mask = exynos4_irq_eint_mask,
- .irq_unmask = exynos4_irq_eint_unmask,
- .irq_mask_ack = exynos4_irq_eint_maskack,
- .irq_ack = exynos4_irq_eint_ack,
- .irq_set_type = exynos4_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-/* exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos4_irq_demux_eint(unsigned int start)
-{
- unsigned int irq;
-
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-
- status &= ~mask;
- status &= 0xff;
-
- while (status) {
- irq = fls(status) - 1;
- generic_handle_irq(irq + start);
- status &= ~(1 << irq);
- }
-}
-
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
- exynos4_irq_demux_eint(IRQ_EINT(16));
- exynos4_irq_demux_eint(IRQ_EINT(24));
- chained_irq_exit(chip, desc);
-}
-
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
- u32 *irq_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
-
- chained_irq_enter(chip, desc);
- chip->irq_mask(&desc->irq_data);
-
- if (chip->irq_ack)
- chip->irq_ack(&desc->irq_data);
-
- generic_handle_irq(*irq_data);
-
- chip->irq_unmask(&desc->irq_data);
- chained_irq_exit(chip, desc);
-}
-
-int __init exynos4_init_irq_eint(void)
-{
- int irq;
-
- for (irq = 0 ; irq <= 31 ; irq++) {
- irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
- handle_level_irq);
- set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-
- for (irq = 0 ; irq <= 15 ; irq++) {
- eint0_15_data[irq] = IRQ_EINT(irq);
-
- irq_set_handler_data(exynos4_get_irq_nr(irq),
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos4_get_irq_nr(irq),
- exynos4_irq_eint0_15);
- }
-
- return 0;
-}
-
-arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index f0ca6c1..d726fcd 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,11 +16,11 @@
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/exynos4.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
@@ -28,6 +28,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -187,7 +189,7 @@
static void __init armlex4210_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
@@ -210,6 +212,8 @@
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = armlex4210_machine_init,
.timer = &exynos4_timer,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 236bbe1..635fb97 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -32,12 +32,12 @@
#include <media/v4l2-mediabus.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/adc.h>
#include <plat/regs-fb-v4.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
@@ -54,6 +54,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -1283,7 +1285,7 @@
static void __init nuri_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
@@ -1333,7 +1335,9 @@
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = nuri_machine_init,
.timer = &exynos4_timer,
.reserve = &nuri_reserve,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f80b563..586eb99 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -22,13 +22,13 @@
#include <linux/lcd.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
@@ -43,6 +43,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -638,7 +640,7 @@
static void __init origen_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
@@ -694,7 +696,9 @@
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = origen_machine_init,
.timer = &exynos4_timer,
.reserve = &origen_reserve,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fcf2e0e..d00e4f0 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -21,13 +21,13 @@
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/backlight.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/exynos4.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <plat/keypad.h>
@@ -36,6 +36,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -249,7 +251,7 @@
{
clk_xusbxti.rate = 24000000;
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
}
@@ -287,8 +289,10 @@
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
+ .restart = exynos4_restart,
MACHINE_END
MACHINE_START(SMDK4412, "SMDK4412")
@@ -297,6 +301,8 @@
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afa..5b36561 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -21,13 +21,13 @@
#include <linux/pwm_backlight.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
@@ -43,6 +43,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -332,7 +334,7 @@
static void __init smdkv310_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}
@@ -375,9 +377,11 @@
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
.reserve = &smdkv310_reserve,
+ .restart = exynos4_restart,
MACHINE_END
MACHINE_START(SMDKC210, "SMDKC210")
@@ -385,6 +389,8 @@
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index a2a177f..52aea97 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -24,10 +24,10 @@
#include <linux/i2c/atmel_mxt_ts.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
@@ -47,6 +47,8 @@
#include <media/s5p_fimc.h>
#include <media/m5mols.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -992,7 +994,7 @@
static void __init universal_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
@@ -1058,7 +1060,9 @@
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = universal_machine_init,
.timer = &exynos4_timer,
.reserve = &universal_reserve,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 97343df..85b5527 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -44,8 +44,6 @@
char name[10];
};
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
static void exynos4_mct_write(unsigned int value, void *addr)
{
void __iomem *stat_addr;
@@ -264,6 +262,9 @@
}
#ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
/* Clock event handling */
static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
{
@@ -428,9 +429,13 @@
void local_timer_stop(struct clock_event_device *evt)
{
+ unsigned int cpu = smp_processor_id();
evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
if (mct_int_type == MCT_INT_SPI)
- disable_irq(evt->irq);
+ if (cpu == 0)
+ remove_irq(evt->irq, &mct_tick0_event_irq);
+ else
+ remove_irq(evt->irq, &mct_tick1_event_irq);
else
disable_percpu_irq(IRQ_MCT_LOCALTIMER);
}
@@ -443,6 +448,7 @@
clk_rate = clk_get_rate(mct_clk);
+#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
@@ -452,6 +458,7 @@
WARN(err, "MCT: can't request IRQ %d (%d)\n",
IRQ_MCT_LOCALTIMER, err);
}
+#endif /* CONFIG_LOCAL_TIMERS */
}
static void __init exynos4_timer_init(void)
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 69ffb2f..60bc45e 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,7 +32,6 @@
#include <plat/cpu.h>
-extern unsigned int gic_bank_offset;
extern void exynos4_secondary_startup(void);
#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
@@ -65,31 +64,6 @@
static DEFINE_SPINLOCK(boot_lock);
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
- void __iomem *dist_base = S5P_VA_GIC_DIST +
- (gic_bank_offset * smp_processor_id());
- void __iomem *cpu_base = S5P_VA_GIC_CPU +
- (gic_bank_offset * smp_processor_id());
- int i;
-
- /*
- * Deal with the banked PPI and SGI interrupts - disable all
- * PPI interrupts, ensure all SGI interrupts are enabled.
- */
- __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
- __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
- /*
- * Set priority on PPI and SGI interrupts
- */
- for (i = 0; i < 32; i += 4)
- __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
- __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
- __raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/*
@@ -97,7 +71,7 @@
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- exynos4_gic_secondary_init();
+ gic_secondary_init(0);
/*
* let the primary processor know we're out of the
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 509a435..c4f792d 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -205,7 +205,7 @@
}
-static int exynos4_pm_add(struct sys_device *sysdev)
+static int exynos4_pm_add(struct device *dev)
{
pm_cpu_prep = exynos4_pm_prepare;
pm_cpu_sleep = exynos4_cpu_suspend;
@@ -301,8 +301,10 @@
} while (epll_wait || vpll_wait);
}
-static struct sysdev_driver exynos4_pm_driver = {
- .add = exynos4_pm_add,
+static struct subsys_interface exynos4_pm_interface = {
+ .name = "exynos4_pm",
+ .subsys = &exynos4_subsys,
+ .add_dev = exynos4_pm_add,
};
static __init int exynos4_pm_drvinit(void)
@@ -325,7 +327,7 @@
clk_put(pll_base);
}
- return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+ return subsys_interface_register(&exynos4_pm_interface);
}
arch_initcall(exynos4_pm_drvinit);
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index d5f1785..25b4536 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,9 +86,10 @@
MACHINE_START(CATS, "Chalice-CATS")
/* Maintainer: Philip Blundell */
.atag_offset = 0x100,
- .soft_reboot = 1,
+ .restart_mode = 's',
.fixup = fixup_cats,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
+ .restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 38a44f9..41978ee 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -199,6 +199,33 @@
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
}
+void footbridge_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into the ROM */
+ soft_restart(0x41000000);
+ } else {
+ /*
+ * Force the watchdog to do a CPU reset.
+ *
+ * After making sure that the watchdog is disabled
+ * (so we can change the timer registers) we first
+ * enable the timer to autoreload itself. Next, the
+ * timer interval is set really short and any
+ * current interrupt request is cleared (so we can
+ * see an edge transition). Finally, TIMER4 is
+ * enabled as the watchdog.
+ */
+ *CSR_SA110_CNTL &= ~(1 << 13);
+ *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+ TIMER_CNTL_AUTORELOAD |
+ TIMER_CNTL_DIV16;
+ *CSR_TIMER4_LOAD = 0x2;
+ *CSR_TIMER4_CLR = 0;
+ *CSR_SA110_CNTL |= (1 << 13);
+ }
+}
+
#ifdef CONFIG_FOOTBRIDGE_ADDIN
static inline unsigned long fb_bus_sdram_offset(void)
diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h
index b05e662..c9767b8 100644
--- a/arch/arm/mach-footbridge/common.h
+++ b/arch/arm/mach-footbridge/common.h
@@ -8,3 +8,4 @@
extern void footbridge_init_irq(void);
extern void isa_init_irq(unsigned int irq);
+extern void footbridge_restart(char, const char *);
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 012210c..27716a7 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -21,5 +21,6 @@
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
+ .restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 0b29315..a174a58 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -7,63 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/io.h>
-#include <asm/hardware/dec21285.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- /*
- * Jump into the ROM
- */
- cpu_reset(0x41000000);
- } else {
- if (machine_is_netwinder()) {
- /* open up the SuperIO chip
- */
- outb(0x87, 0x370);
- outb(0x87, 0x370);
-
- /* aux function group 1 (logical device 7)
- */
- outb(0x07, 0x370);
- outb(0x07, 0x371);
-
- /* set GP16 for WD-TIMER output
- */
- outb(0xe6, 0x370);
- outb(0x00, 0x371);
-
- /* set a RED LED and toggle WD_TIMER for rebooting
- */
- outb(0xc4, 0x338);
- } else {
- /*
- * Force the watchdog to do a CPU reset.
- *
- * After making sure that the watchdog is disabled
- * (so we can change the timer registers) we first
- * enable the timer to autoreload itself. Next, the
- * timer interval is set really short and any
- * current interrupt request is cleared (so we can
- * see an edge transition). Finally, TIMER4 is
- * enabled as the watchdog.
- */
- *CSR_SA110_CNTL &= ~(1 << 13);
- *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
- TIMER_CNTL_AUTORELOAD |
- TIMER_CNTL_DIV16;
- *CSR_TIMER4_LOAD = 0x2;
- *CSR_TIMER4_CLR = 0;
- *CSR_SA110_CNTL |= (1 << 13);
- }
- }
-}
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
deleted file mode 100644
index 40ba78e..0000000
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 0d3846f..80a1c5c 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -645,6 +645,32 @@
#endif
}
+static void netwinder_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into the ROM */
+ soft_restart(0x41000000);
+ } else {
+ local_irq_disable();
+ local_fiq_disable();
+
+ /* open up the SuperIO chip */
+ outb(0x87, 0x370);
+ outb(0x87, 0x370);
+
+ /* aux function group 1 (logical device 7) */
+ outb(0x07, 0x370);
+ outb(0x07, 0x371);
+
+ /* set GP16 for WD-TIMER output */
+ outb(0xe6, 0x370);
+ outb(0x00, 0x371);
+
+ /* set a RED LED and toggle WD_TIMER for rebooting */
+ outb(0xc4, 0x338);
+ }
+}
+
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.atag_offset = 0x100,
@@ -656,4 +682,5 @@
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
+ .restart = netwinder_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index f41dba3..e1e9990 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -19,5 +19,6 @@
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
+ .restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h
deleted file mode 100644
index 45371eb..0000000
--- a/arch/arm/mach-gemini/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 51d4e44..f8a2f6b 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -242,3 +242,8 @@
{
iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc));
}
+
+void h720x_restart(char mode, const char *cmd)
+{
+ CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h
index 7dd5fa6..2489537 100644
--- a/arch/arm/mach-h720x/common.h
+++ b/arch/arm/mach-h720x/common.h
@@ -16,6 +16,7 @@
extern unsigned long h720x_gettimeoffset(void);
extern void __init h720x_init_irq(void);
extern void __init h720x_map_io(void);
+extern void h720x_restart(char, const char *);
#ifdef CONFIG_ARCH_H7202
extern struct sys_timer h7202_timer;
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 9886f19..5fdb20c 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -34,4 +34,5 @@
.init_irq = h720x_init_irq,
.timer = &h7201_timer,
.dma_zone_size = SZ_256M,
+ .restart = h720x_restart,
MACHINE_END
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 284a134..1696730 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -77,4 +77,5 @@
.timer = &h7202_timer,
.init_machine = init_eval_h7202,
.dma_zone_size = SZ_256M,
+ .restart = h720x_restart,
MACHINE_END
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
index a708d24..16ac46e 100644
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -24,10 +24,4 @@
nop();
}
-
-static __inline__ void arch_reset(char mode, const char *cmd)
-{
- CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
#endif
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
deleted file mode 100644
index 8520b4a..0000000
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END 0xd0000000UL
-
-#endif
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index 7e33fc9..d8e2d0b 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -1,5 +1,6 @@
extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
extern void highbank_clocks_init(void);
+extern void highbank_restart(char, const char *);
extern void __iomem *scu_base_addr;
#ifdef CONFIG_DEBUG_HIGHBANK_UART
extern void highbank_lluart_map_io(void);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index b82dcf0..804c4a5 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -22,6 +22,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
+#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/unified.h>
@@ -72,6 +73,9 @@
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
+#ifdef CONFIG_SMP
+ cpu = cpu_logical_map(cpu);
+#endif
writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
@@ -140,6 +144,8 @@
.map_io = highbank_map_io,
.init_irq = highbank_init_irq,
.timer = &highbank_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = highbank_init,
.dt_compat = highbank_match,
+ .restart = highbank_restart,
MACHINE_END
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
index 73c11297..a14f9e6 100644
--- a/arch/arm/mach-highbank/include/mach/entry-macro.S
+++ b/arch/arm/mach-highbank/include/mach/entry-macro.S
@@ -1,5 +1,3 @@
-#include <asm/hardware/entry-macro-gic.S>
-
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
index 7e81922..b1d8b5f 100644
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ b/arch/arm/mach-highbank/include/mach/system.h
@@ -21,6 +21,4 @@
cpu_do_idle();
}
-extern void arch_reset(char mode, const char *cmd);
-
#endif
diff --git a/arch/arm/mach-highbank/include/mach/vmalloc.h b/arch/arm/mach-highbank/include/mach/vmalloc.h
deleted file mode 100644
index 1969e95..0000000
--- a/arch/arm/mach-highbank/include/mach/vmalloc.h
+++ /dev/null
@@ -1 +0,0 @@
-#define VMALLOC_END 0xFEE00000UL
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index 53f0c4c..82c27230 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -20,7 +20,7 @@
#include "core.h"
#include "sysregs.h"
-void arch_reset(char mode, const char *cmd)
+void highbank_restart(char mode, const char *cmd)
{
if (mode == 'h')
hignbank_set_pwr_hard_reset();
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2..35a218c 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -10,11 +10,6 @@
config HAVE_IMX_SRC
bool
-#
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
config ARCH_MX1
bool
@@ -27,12 +22,6 @@
config MACH_MX27
bool
-config ARCH_MX31
- bool
-
-config ARCH_MX35
- bool
-
config SOC_IMX1
bool
select ARCH_MX1
@@ -72,7 +61,6 @@
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select ARCH_MXC_AUDMUX_V2
- select ARCH_MX31
select MXC_AVIC
select SMP_ON_UP if SMP
@@ -82,7 +70,6 @@
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select HAVE_EPIT
- select ARCH_MX35
select MXC_AVIC
select SMP_ON_UP if SMP
@@ -145,7 +132,7 @@
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-config MACH_EUKREA_CPUIMX25
+config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
@@ -161,7 +148,7 @@
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX25
+ depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
@@ -555,7 +542,7 @@
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
-config MACH_EUKREA_CPUIMX35
+config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
@@ -573,7 +560,7 @@
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX35
+ depends on MACH_EUKREA_CPUIMX35SD
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
@@ -609,12 +596,12 @@
config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_GIC
- select CACHE_L2X0
select CPU_V7
select HAVE_ARM_SCU
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
+ select HAVE_SMP
select USE_OF
help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index aba7321..d97f409 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -24,7 +24,7 @@
# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
# i.MX27 based machines
@@ -57,7 +57,7 @@
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 8116f11..ac8238c 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -507,7 +507,7 @@
int __init mx35_clocks_init()
{
- unsigned int cgr2 = 3 << 26, cgr3 = 0;
+ unsigned int cgr2 = 3 << 26;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
cgr2 |= 3 << 16;
@@ -521,6 +521,12 @@
__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
CCM_BASE + CCM_CGR1);
+ __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+ __raw_writel(0, CCM_BASE + CCM_CGR3);
+
+ clk_enable(&iim_clk);
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+ clk_disable(&iim_clk);
/*
* Check if we came up in internal boot mode. If yes, we need some
@@ -529,17 +535,11 @@
*/
if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
/* Additionally turn on UART1, SCC, and IIM clocks */
- cgr2 |= 3 << 16 | 3 << 4;
- cgr3 |= 3 << 2;
+ clk_enable(&iim_clk);
+ clk_enable(&uart1_clk);
+ clk_enable(&scc_clk);
}
- __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
- __raw_writel(cgr3, CCM_BASE + CCM_CGR3);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX35", mx35_revision());
- clk_disable(&iim_clk);
-
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 613a1b9..9273c2a 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1931,14 +1931,12 @@
val |= 0x1 << BP_CLPCR_LPM;
val &= ~BM_CLPCR_VSTBY;
val &= ~BM_CLPCR_SBYOS;
- val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
case STOP_POWER_OFF:
val |= 0x2 << BP_CLPCR_LPM;
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
- val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
default:
return -EINVAL;
@@ -1953,14 +1951,17 @@
imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
};
+void __init imx6q_clock_map_io(void)
+{
+ iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+}
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
int i, irq;
- iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-
/* retrieve the freqency of fixed clocks from device tree */
for_each_compatible_node(np, NULL, "fixed-clock") {
u32 rate;
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 1e486e6..146a4f0 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -139,4 +139,5 @@
.handle_irq = imx1_handle_irq,
.timer = &apf9328_timer,
.init_machine = apf9328_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index c9a9cf6..e4f426a 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -561,4 +561,5 @@
.handle_irq = imx31_handle_irq,
.timer = &armadillo5x0_timer,
.init_machine = armadillo5x0_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 313f62d..9a98977 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -65,4 +65,5 @@
.handle_irq = imx31_handle_irq,
.timer = &bug_timer,
.init_machine = bug_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index edb3730..d085aea 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -318,4 +318,5 @@
.handle_irq = imx27_handle_irq,
.timer = &eukrea_cpuimx27_timer,
.init_machine = eukrea_cpuimx27_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 66af2e8..8ecc872 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -53,12 +53,18 @@
.bitrate = 100000,
};
+#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
+static int tsc2007_get_pendown_state(void)
+{
+ return !gpio_get_value(TSC2007_IRQGPIO);
+}
+
static struct tsc2007_platform_data tsc2007_info = {
.model = 2007,
.x_plate_ohms = 180,
+ .get_pendown_state = tsc2007_get_pendown_state,
};
-#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
@@ -201,4 +207,5 @@
.handle_irq = imx35_handle_irq,
.timer = &eukrea_cpuimx35_timer,
.init_machine = eukrea_cpuimx35_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index ab8fbcc..76a97a5 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -170,4 +170,5 @@
.handle_irq = imx25_handle_irq,
.timer = &eukrea_cpuimx25_timer,
.init_machine = eukrea_cpuimx25_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 38eb9e4..c2766ae 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -282,4 +282,5 @@
.handle_irq = imx27_handle_irq,
.timer = &visstrim_m10_timer,
.init_machine = visstrim_m10_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 7052155..c9d350c 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -78,4 +78,5 @@
.handle_irq = imx27_handle_irq,
.timer = &mx27ipcam_timer,
.init_machine = mx27ipcam_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 8d6a635..1f45b91 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -84,4 +84,5 @@
.handle_irq = imx27_handle_irq,
.timer = &mx27lite_timer,
.init_machine = mx27lite_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 8bf5fa3..05b49bb 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,10 +10,13 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/hardware/cache-l2x0.h>
@@ -23,6 +26,36 @@
#include <mach/common.h>
#include <mach/hardware.h>
+void imx6q_restart(char mode, const char *cmd)
+{
+ struct device_node *np;
+ void __iomem *wdog_base;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
+ wdog_base = of_iomap(np, 0);
+ if (!wdog_base)
+ goto soft;
+
+ imx_src_prepare_restart();
+
+ /* enable wdog */
+ writew_relaxed(1 << 2, wdog_base);
+ /* write twice to ensure the request will not get ignored */
+ writew_relaxed(1 << 2, wdog_base);
+
+ /* wait for reset to assert ... */
+ mdelay(500);
+
+ pr_err("Watchdog reset failed to assert reset\n");
+
+ /* delay to allow the serial port to show the message */
+ mdelay(50);
+
+soft:
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
+
static void __init imx6q_init_machine(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -34,16 +67,18 @@
{
imx_lluart_map_io();
imx_scu_map_io();
+ imx6q_clock_map_io();
}
-static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
- 32 * 7; /* imx6q gets 7 gpio ports */
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
+ gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
- gpio_irq_base += 32;
+
+ return 0;
}
static const struct of_device_id imx6q_irq_match[] __initconst = {
@@ -81,4 +116,5 @@
.timer = &imx6q_timer,
.init_machine = imx6q_init_machine,
.dt_compat = imx6q_dt_compat,
+ .restart = imx6q_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 5f37f89..fc78e80 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -279,4 +279,5 @@
.handle_irq = imx31_handle_irq,
.timer = &kzm_timer,
.init_machine = kzm_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index fc49785..9704608 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -147,6 +147,7 @@
.handle_irq = imx1_handle_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
+ .restart = mxc_restart,
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
@@ -157,4 +158,5 @@
.handle_irq = imx1_handle_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 25f8402..8d9f955 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -312,4 +312,5 @@
.handle_irq = imx21_handle_irq,
.timer = &mx21ads_timer,
.init_machine = mx21ads_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 88dccf1..f267342 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -270,4 +270,5 @@
.handle_irq = imx25_handle_irq,
.timer = &mx25pdk_timer,
.init_machine = mx25pdk_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index ba232d7..18f3581 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -425,4 +425,5 @@
.handle_irq = imx27_handle_irq,
.timer = &mx27pdk_timer,
.init_machine = mx27pdk_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 74dd573..0228d2e 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -351,4 +351,5 @@
.handle_irq = imx27_handle_irq,
.timer = &mx27ads_timer,
.init_machine = mx27ads_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index b8c54b8..2b565c3 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -770,4 +770,5 @@
.timer = &mx31_3ds_timer,
.init_machine = mx31_3ds_init,
.reserve = mx31_3ds_reserve,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 9cc1a49..4917aab 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -542,4 +542,5 @@
.handle_irq = imx31_handle_irq,
.timer = &mx31ads_timer,
.init_machine = mx31ads_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 102ec99..02401bb 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -303,4 +303,5 @@
.handle_irq = imx31_handle_irq,
.timer = &mx31lilly_timer,
.init_machine = mx31lilly_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 5366d2d..ef80751 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -287,4 +287,5 @@
.handle_irq = imx31_handle_irq,
.timer = &mx31lite_timer,
.init_machine = mx31lite_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 9326915..b95981d 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -600,4 +600,5 @@
.handle_irq = imx31_handle_irq,
.timer = &mx31moboard_timer,
.init_machine = mx31moboard_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 7a46202..0af6c9c 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -224,4 +224,5 @@
.handle_irq = imx35_handle_irq,
.timer = &mx35pdk_timer,
.init_machine = mx35_3ds_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 125c196..8b3d3f0 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -274,4 +274,5 @@
.handle_irq = imx27_handle_irq,
.timer = &mxt_td60_timer,
.init_machine = mxt_td60_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 26072f4..d3b9c6b 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -442,4 +442,5 @@
.handle_irq = imx27_handle_irq,
.init_machine = pca100_init,
.timer = &pca100_timer,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index efd6b53..d7e1516 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -696,4 +696,5 @@
.handle_irq = imx31_handle_irq,
.timer = &pcm037_timer,
.init_machine = pcm037_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index a17e9c7..16f126d 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -357,4 +357,5 @@
.handle_irq = imx27_handle_irq,
.timer = &pcm038_timer,
.init_machine = pcm038_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 7366c2a..06dc106 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -425,4 +425,5 @@
.handle_irq = imx35_handle_irq,
.timer = &pcm043_timer,
.init_machine = pcm043_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 4ff5faf..2606210 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -273,4 +273,5 @@
.handle_irq = imx31_handle_irq,
.timer = &qong_timer,
.init_machine = qong_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index bb6e5b2..cb9ceae 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -144,4 +144,5 @@
.handle_irq = imx1_handle_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 6909245..033257e 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -322,4 +322,5 @@
.handle_irq = imx35_handle_irq,
.timer = &vpr200_timer,
.init_machine = vpr200_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9f0e82e..31807d2 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -33,29 +33,32 @@
static void imx3_idle(void)
{
unsigned long reg = 0;
- __asm__ __volatile__(
- /* disable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "bic %0, %0, #0x00001000\n"
- "bic %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- /* invalidate I cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c5, 0\n"
- /* clear and invalidate D cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c14, 0\n"
- /* WFI */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c0, 4\n"
- "nop\n" "nop\n" "nop\n" "nop\n"
- "nop\n" "nop\n" "nop\n"
- /* enable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "orr %0, %0, #0x00001000\n"
- "orr %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- : "=r" (reg));
+
+ if (!need_resched())
+ __asm__ __volatile__(
+ /* disable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #0x00001000\n"
+ "bic %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ /* invalidate I cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c5, 0\n"
+ /* clear and invalidate D cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c14, 0\n"
+ /* WFI */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c0, 4\n"
+ "nop\n" "nop\n" "nop\n" "nop\n"
+ "nop\n" "nop\n" "nop\n"
+ /* enable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #0x00001000\n"
+ "orr %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : "=r" (reg));
+ local_irq_enable();
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -108,6 +111,7 @@
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
}
+#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
@@ -126,33 +130,11 @@
iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
}
-static struct map_desc mx35_io_desc[] __initdata = {
- imx_map_entry(MX35, X_MEMC, MT_DEVICE),
- imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
- iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
void __init imx31_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- imx_idle = imx3_idle;
- imx_ioremap = imx3_ioremap;
-}
-
-void __init imx35_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- imx_idle = imx3_idle;
+ pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
@@ -161,11 +143,6 @@
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
}
-void __init mx35_init_irq(void)
-{
- mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
.per_2_per_addr = 1677,
};
@@ -199,6 +176,35 @@
imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
}
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+ imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+ iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+ mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+ pm_idle = imx3_idle;
+ imx_ioremap = imx3_ioremap;
+}
+
+void __init mx35_init_irq(void)
+{
+ mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
.ap_2_ap_addr = 642,
@@ -254,3 +260,4 @@
imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
}
+#endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 36cacbd..4bde04f 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -14,19 +14,26 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/smp.h>
#include <asm/unified.h>
#define SRC_SCR 0x000
#define SRC_GPR1 0x020
+#define BP_SRC_SCR_WARM_RESET_ENABLE 0
#define BP_SRC_SCR_CORE1_RST 14
#define BP_SRC_SCR_CORE1_ENABLE 22
static void __iomem *src_base;
+#ifndef CONFIG_SMP
+#define cpu_logical_map(cpu) 0
+#endif
+
void imx_enable_cpu(int cpu, bool enable)
{
u32 mask, val;
+ cpu = cpu_logical_map(cpu);
mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
@@ -35,15 +42,38 @@
void imx_set_cpu_jump(int cpu, void *jump_addr)
{
+ cpu = cpu_logical_map(cpu);
writel_relaxed(BSYM(virt_to_phys(jump_addr)),
src_base + SRC_GPR1 + cpu * 8);
}
+void imx_src_prepare_restart(void)
+{
+ u32 val;
+
+ /* clear enable bits of secondary cores */
+ val = readl_relaxed(src_base + SRC_SCR);
+ val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
+ writel_relaxed(val, src_base + SRC_SCR);
+
+ /* clear persistent entry register of primary core */
+ writel_relaxed(0, src_base + SRC_GPR1);
+}
+
void __init imx_src_init(void)
{
struct device_node *np;
+ u32 val;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
src_base = of_iomap(np, 0);
WARN_ON(!src_base);
+
+ /*
+ * force warm reset sources to generate cold reset
+ * for a more reliable restart
+ */
+ val = readl_relaxed(src_base + SRC_SCR);
+ val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
+ writel_relaxed(val, src_base + SRC_SCR);
}
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index dfd18f3..350e266 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -6,6 +6,8 @@
bool "Support Integrator/AP and Integrator/PP2 platforms"
select CLKSRC_MMIO
select MIGHT_HAVE_PCI
+ select SERIAL_AMBA_PL010
+ select SERIAL_AMBA_PL010_CONSOLE
help
Include support for the ARM(R) Integrator/AP and
Integrator/PP2 platforms.
@@ -15,6 +17,8 @@
select ARCH_CINTEGRATOR
select ARM_TIMER_SP804
select PLAT_VERSATILE_CLCD
+ select SERIAL_AMBA_PL011
+ select SERIAL_AMBA_PL011_CONSOLE
help
Include support for the ARM(R) Integrator CP platform.
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
index a08f9b0..899561d 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-integrator/common.h
@@ -1,2 +1,3 @@
void integrator_init_early(void);
void integrator_reserve(void);
+void integrator_restart(char, const char *);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 4b38e13..019f0ab 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -29,6 +29,7 @@
#include <mach/cm.h>
#include <asm/system.h>
#include <asm/leds.h>
+#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
@@ -44,7 +45,6 @@
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_RTCINT, NO_IRQ },
- .periphid = 0x00041030,
};
static struct amba_device uart0_device = {
@@ -58,7 +58,6 @@
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_UARTINT0, NO_IRQ },
- .periphid = 0x0041010,
};
static struct amba_device uart1_device = {
@@ -72,7 +71,6 @@
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_UARTINT1, NO_IRQ },
- .periphid = 0x0041010,
};
static struct amba_device kmi0_device = {
@@ -85,7 +83,6 @@
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_KMIINT0, NO_IRQ },
- .periphid = 0x00041050,
};
static struct amba_device kmi1_device = {
@@ -98,7 +95,6 @@
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_KMIINT1, NO_IRQ },
- .periphid = 0x00041050,
};
static struct amba_device *amba_devs[] __initdata = {
@@ -157,6 +153,19 @@
{
int i;
+ /*
+ * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
+ * hard-code them. The Integator/CP and forward have proper cell IDs.
+ * Else we leave them undefined to the bus driver can autoprobe them.
+ */
+ if (machine_is_integrator()) {
+ rtc_device.periphid = 0x00041030;
+ uart0_device.periphid = 0x00041010;
+ uart1_device.periphid = 0x00041010;
+ kmi0_device.periphid = 0x00041050;
+ kmi1_device.periphid = 0x00041050;
+ }
+
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
@@ -238,3 +247,11 @@
{
memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
}
+
+/*
+ * To reset, we hit the on-board reset register in the system FPGA
+ */
+void integrator_restart(char mode, const char *cmd)
+{
+ cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
index e1551b8..901514e 100644
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -21,8 +21,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/cm.h>
-
static inline void arch_idle(void)
{
/*
@@ -32,13 +30,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * To reset, we hit the on-board reset register
- * in the system FPGA
- */
- cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
#endif
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
deleted file mode 100644
index 2f5a2baf..0000000
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index a1769f3..21a1d6c 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -472,4 +472,5 @@
.init_irq = ap_init_irq,
.timer = &ap_timer,
.init_machine = ap_init,
+ .restart = integrator_restart,
MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 5de49c3..a8b6aa6 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -14,7 +14,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/string.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
@@ -499,4 +499,5 @@
.init_irq = intcp_init_irq,
.timer = &cp_timer,
.init_machine = intcp_init,
+ .restart = integrator_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
index 52b7fab..07e9ff7 100644
--- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
@@ -10,6 +10,7 @@
void iop13xx_platform_init(void);
void iop13xx_add_tpmi_devices(void);
void iop13xx_init_irq(void);
+void iop13xx_restart(char, const char *);
/* CPUID CP6 R0 Page 0 */
static inline int iop13xx_cpu_id(void)
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
index d0c66ef..1f31ed3 100644
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -7,21 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <mach/iop13xx.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Reset the internal bus (warning both cores are reset)
- */
- write_wdtcr(IOP_WDTCR_EN_ARM);
- write_wdtcr(IOP_WDTCR_EN);
- write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
- write_wdtcr(0x1000);
-
- for(;;);
-}
diff --git a/arch/arm/mach-iop13xx/include/mach/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
deleted file mode 100644
index c534567..0000000
--- a/arch/arm/mach-iop13xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _VMALLOC_H_
-#define _VMALLOC_H_
-#define VMALLOC_END 0xfa000000UL
-#endif
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 4cf2cc4..abaee88 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -96,4 +96,5 @@
.init_irq = iop13xx_init_irq,
.timer = &iq81340mc_timer,
.init_machine = iq81340mc_init,
+ .restart = iop13xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index cd9e274..690916a 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -98,4 +98,5 @@
.init_irq = iop13xx_init_irq,
.timer = &iq81340sc_timer,
.init_machine = iq81340sc_init,
+ .restart = iop13xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index a5b9897..daabb1f 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -606,3 +606,14 @@
__setup("iop13xx_init_adma", iop13xx_init_adma_setup);
__setup("iop13xx_init_uart", iop13xx_init_uart_setup);
__setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
+
+void iop13xx_restart(char mode, const char *cmd)
+{
+ /*
+ * Reset the internal bus (warning both cores are reset)
+ */
+ write_wdtcr(IOP_WDTCR_EN_ARM);
+ write_wdtcr(IOP_WDTCR_EN);
+ write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+ write_wdtcr(0x1000);
+}
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 4325055..24069e0 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -208,4 +208,5 @@
.init_irq = iop32x_init_irq,
.timer = &em7210_timer,
.init_machine = em7210_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 0edc880..204e1d1 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -212,4 +212,5 @@
.init_irq = iop32x_init_irq,
.timer = &glantank_timer,
.init_machine = glantank_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
index 059c783..2d88264 100644
--- a/arch/arm/mach-iop32x/include/mach/io.h
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -13,15 +13,8 @@
#include <asm/hardware/iop3xx.h>
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
-#define __arch_ioremap __iop3xx_ioremap
-#define __arch_iounmap __iop3xx_iounmap
-
#endif
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
index a4b808f..4a88727 100644
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -7,28 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <asm/mach-types.h>
-#include <asm/hardware/iop3xx.h>
-#include <mach/n2100.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- local_irq_disable();
-
- if (machine_is_n2100()) {
- gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
- gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
- while (1)
- ;
- }
-
- *IOP3XX_PCSR = 0x30;
-
- /* Jump into ROM at address 0 */
- cpu_reset(0);
-}
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
deleted file mode 100644
index c4862d4..0000000
--- a/arch/arm/mach-iop32x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 9e7aacc..3eb642a 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -318,6 +318,7 @@
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
.init_machine = iq31244_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
/* There should have been an ep80219 machine identifier from the beginning.
@@ -332,4 +333,5 @@
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
.init_machine = iq31244_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 53ea86f..2ec724b 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -191,4 +191,5 @@
.init_irq = iop32x_init_irq,
.timer = &iq80321_timer,
.init_machine = iq80321_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index d726927..6b6d559 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -291,6 +291,14 @@
;
}
+static void n2100_restart(char mode, const char *cmd)
+{
+ gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
+ gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+ while (1)
+ ;
+}
+
static struct timer_list power_button_poll_timer;
@@ -332,4 +340,5 @@
.init_irq = iop32x_init_irq,
.timer = &n2100_timer,
.init_machine = n2100_init_machine,
+ .restart = n2100_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
index 39e893e..a8a66fc 100644
--- a/arch/arm/mach-iop33x/include/mach/io.h
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -13,15 +13,8 @@
#include <asm/hardware/iop3xx.h>
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
-#define __arch_ioremap __iop3xx_ioremap
-#define __arch_iounmap __iop3xx_iounmap
-
#endif
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
index f192a34..4f98e76 100644
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -7,17 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <asm/hardware/iop3xx.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- *IOP3XX_PCSR = 0x30;
-
- /* Jump into ROM at address 0 */
- cpu_reset(0);
-}
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
deleted file mode 100644
index 48331dc..0000000
--- a/arch/arm/mach-iop33x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 9e14ccc..abce934 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -146,4 +146,5 @@
.init_irq = iop33x_init_irq,
.timer = &iq80331_timer,
.init_machine = iq80331_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 09c899a..7513559 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -146,4 +146,5 @@
.init_irq = iop33x_init_irq,
.timer = &iq80332_timer,
.init_machine = iq80332_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 24f0fe3..81c4537 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -515,3 +515,7 @@
}
}
+void ixp2000_restart(char mode, const char *cmd)
+{
+ ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
+}
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index af99945..ee52541 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -259,6 +259,7 @@
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
.init_machine = enp2611_init_machine,
+ .restart = ixp2000_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
index 42182c79..bb0f8dc 100644
--- a/arch/arm/mach-ixp2000/include/mach/platform.h
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -122,6 +122,7 @@
void ixp2000_uart_init(void);
void ixp2000_init_irq(void);
void ixp2000_init_time(unsigned long);
+void ixp2000_restart(char, const char *);
unsigned long ixp2000_gettimeoffset(void);
struct pci_sys_data;
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
index de37099..a7fb08b 100644
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -8,42 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- local_irq_disable();
-
- /*
- * Reset flash banking register so that we are pointing at
- * RedBoot bank.
- */
- if (machine_is_ixdp2401()) {
- ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
- ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
- | IXDP2X01_CPLD_FLASH_INTERN));
- ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
- }
-
- /*
- * On IXDP2801 we need to write this magic sequence to the CPLD
- * to cause a complete reset of the CPU and all external devices
- * and move the flash bank register back to 0.
- */
- if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
- unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
- reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
- ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
- ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
- }
-
- ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
deleted file mode 100644
index 61c8dae..0000000
--- a/arch/arm/mach-ixp2000/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/vmalloc.h
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END 0xfb000000UL
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index f7dfd97..f53e911 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -176,5 +176,6 @@
.init_irq = ixdp2400_init_irq,
.timer = &ixdp2400_timer,
.init_machine = ixdp2x00_init_machine,
+ .restart = ixp2000_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index d33bcac..a2e7c39 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -291,5 +291,6 @@
.init_irq = ixdp2800_init_irq,
.timer = &ixdp2800_timer,
.init_machine = ixdp2x00_init_machine,
+ .restart = ixp2000_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 61a2867..7632bea 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -413,6 +413,35 @@
ixdp2x01_uart_init();
}
+static void ixdp2401_restart(char mode, const char *cmd)
+{
+ /*
+ * Reset flash banking register so that we are pointing at
+ * RedBoot bank.
+ */
+ ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+ ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+ | IXDP2X01_CPLD_FLASH_INTERN));
+ ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
+
+ ixp2000_restart(mode, cmd);
+}
+
+static void ixdp280x_restart(char mode, const char *cmd)
+{
+ /*
+ * On IXDP2801 we need to write this magic sequence to the CPLD
+ * to cause a complete reset of the CPU and all external devices
+ * and move the flash bank register back to 0.
+ */
+ unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
+ reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+ ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+ ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
+
+ ixp2000_restart(mode, cmd);
+}
#ifdef CONFIG_ARCH_IXDP2401
MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
@@ -422,6 +451,7 @@
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
+ .restart = ixdp2401_restart,
MACHINE_END
#endif
@@ -433,6 +463,7 @@
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
+ .restart = ixdp280x_restart,
MACHINE_END
/*
@@ -446,6 +477,7 @@
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
+ .restart = ixdp280x_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index a1bee33..0923bb9 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -444,3 +444,9 @@
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
}
+
+void ixp23xx_restart(char mode, const char *cmd)
+{
+ /* Use on-chip reset capability */
+ *IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index 30dd316..8f2487e 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -90,4 +90,5 @@
.timer = &ixp23xx_timer,
.atag_offset = 0x100,
.init_machine = espresso_init,
+ .restart = ixp23xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
index a1749d0..4ce4353 100644
--- a/arch/arm/mach-ixp23xx/include/mach/io.h
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -20,33 +20,4 @@
#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
#define __mem_pci(a) (a)
-static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
-{
- if (addr >= IXP23XX_PCI_MEM_START &&
- addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
- if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
- return NULL;
-
- return (void __iomem *)
- ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
- }
-
- return __arm_ioremap(addr, size, mtype);
-}
-
-static inline void
-ixp23xx_iounmap(void __iomem *addr)
-{
- if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
- (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
- return;
-
- __iounmap(addr);
-}
-
-#define __arch_ioremap ixp23xx_ioremap
-#define __arch_iounmap ixp23xx_iounmap
-
-
#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
index db9d941..50de558 100644
--- a/arch/arm/mach-ixp23xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -34,6 +34,7 @@
void ixp23xx_map_io(void);
void ixp23xx_init_irq(void);
void ixp23xx_sys_init(void);
+void ixp23xx_restart(char, const char *);
int ixp23xx_pci_setup(int, struct pci_sys_data *);
void ixp23xx_pci_preinit(void);
struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
index 8920ff2..277dda7 100644
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -7,10 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
static inline void arch_idle(void)
{
#if 0
@@ -18,16 +14,3 @@
cpu_do_idle();
#endif
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* First try machine specific support */
- if (machine_is_ixdp2351()) {
- *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
- (void) *IXDP2351_CPLD_RESET1_REG;
- *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
- }
-
- /* Use on-chip reset capability */
- *IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
deleted file mode 100644
index 896c56a..0000000
--- a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * NPU mappings end at 0xf0000000 and we allocate 64MB for board
- * specific static I/O.
- */
-
-#define VMALLOC_END (0xec000000UL)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index b3a57e0..5d5dd3e 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -326,6 +326,17 @@
ixp23xx_sys_init();
}
+static void ixdp2351_restart(char mode, const char *cmd)
+{
+ /* First try machine specific support */
+
+ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+ (void) *IXDP2351_CPLD_RESET1_REG;
+ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+
+ ixp23xx_restart(mode, cmd);
+}
+
MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.map_io = ixdp2351_map_io,
@@ -333,4 +344,5 @@
.timer = &ixp23xx_timer,
.atag_offset = 0x100,
.init_machine = ixdp2351_init,
+ .restart = ixdp2351_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 8f4dcbb..377283f 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -177,4 +177,5 @@
.timer = &ixp23xx_timer,
.atag_offset = 0x100,
.init_machine = roadrunner_init,
+ .restart = ixp23xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 37609a2..a7277ad 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -172,6 +172,7 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
/*
@@ -190,6 +191,7 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index b86a005..3841ab4 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -17,7 +17,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
@@ -403,18 +402,9 @@
/*
* sched_clock()
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace ixp4xx_read_sched_clock(void)
{
- u32 cyc = *IXP4XX_OSTS;
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace ixp4xx_update_sched_clock(void)
-{
- u32 cyc = *IXP4XX_OSTS;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return *IXP4XX_OSTS;
}
/*
@@ -430,7 +420,7 @@
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
- init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
+ setup_sched_clock(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
ixp4xx_clocksource_read);
@@ -501,3 +491,23 @@
clockevents_register_device(&clockevent_ixp4xx);
}
+
+void ixp4xx_restart(char mode, const char *cmd)
+{
+ if ( 1 && mode == 's') {
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ /* Use on-chip reset capability */
+
+ /* set the "key" register to enable access to
+ * "timer" and "enable" registers
+ */
+ *IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+ /* write 0 to the timer register for an immediate reset */
+ *IXP4XX_OSWT = 0;
+
+ *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+ }
+}
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 81dfec3..a74f86c 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -117,6 +117,7 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -132,6 +133,7 @@
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
.init_machine = coyote_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 8837fbc..67be177 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -286,4 +286,5 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 2887c35..6d58182 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -277,5 +277,6 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d69d1b0..7ecf9b2 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -104,5 +104,6 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index bf6678d..c0e3d69 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -504,4 +504,5 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index aa029fc..a23f893 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -172,6 +172,7 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index e824c02..df9250b 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -125,6 +125,7 @@
extern void ixp4xx_sys_init(void);
extern void ixp4xx_timer_init(void);
extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_restart(char, const char *);
extern void ixp4xx_pci_preinit(void);
struct pci_sys_data;
extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 54c0af7..140a9be 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -8,9 +8,6 @@
* published by the Free Software Foundation.
*
*/
-
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
/* ixp4xx does not implement the XScale PWRMODE register,
@@ -20,25 +17,3 @@
cpu_do_idle();
#endif
}
-
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if ( 1 && mode == 's') {
- /* Jump into ROM at address 0 */
- cpu_reset(0);
- } else {
- /* Use on-chip reset capability */
-
- /* set the "key" register to enable access to
- * "timer" and "enable" registers
- */
- *IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
- /* write 0 to the timer register for an immediate reset */
- *IXP4XX_OSWT = 0;
-
- *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
- }
-}
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
deleted file mode 100644
index 9bcd64d..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
- */
-#define VMALLOC_END (0xff000000UL)
-
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index f235f82..8a38b39 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -261,6 +261,7 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index de716fa..1010eb7 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -321,4 +321,5 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ac81ccb..aa355c3 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -307,4 +307,5 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 3b6a81a..0940869 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -246,6 +246,7 @@
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -259,6 +260,7 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -269,5 +271,6 @@
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 27e469e..9dec206 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -244,4 +244,5 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index b14144b..5ac0f0a 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -105,5 +105,6 @@
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index f3248cf..0bff4a9 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -534,3 +534,19 @@
return 0;
}
late_initcall(kirkwood_clock_gate);
+
+void kirkwood_restart(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index b9b0f09..1529280 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -50,6 +50,7 @@
void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
+void kirkwood_restart(char, const char *);
extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index f457e07..6e1bac9 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -227,4 +227,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index ff4c21c..d933593 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -103,4 +103,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index e4d199b..61d9a55 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -108,4 +108,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 6c40f78..bdaed38 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -127,4 +127,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index 1aaddc3..49dd0cb 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -19,31 +19,6 @@
+ KIRKWOOD_PCIE_IO_VIRT_BASE);
}
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
- void __iomem *retval;
- unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
- if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
- size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
- retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
- } else {
- retval = __arm_ioremap(paddr, size, mtype);
- }
-
- return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
- if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
- addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
- __iounmap(addr);
-}
-
-#define __arch_ioremap __arch_ioremap
-#define __arch_iounmap __arch_iounmap
#define __io(a) __io(a)
#define __mem_pci(a) (a)
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 7568e95..5fddde0 100644
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -9,28 +9,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/bridge-regs.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
deleted file mode 100644
index bf162ca..0000000
--- a/arch/arm/mach-kirkwood/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe800000UL
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 9a1e917..85f6169 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -169,4 +169,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 8849bcc..e6bba01 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -264,6 +264,7 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -275,6 +276,7 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -286,5 +288,6 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 1ba12c4..31ae8de 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -405,6 +405,7 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -416,5 +417,6 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 5660ca6..01f8c89 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -220,6 +220,7 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -232,6 +233,7 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -244,5 +246,6 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6663869..fd2c9c8 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -85,4 +85,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 66b3c05..ef92207 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -121,4 +121,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 8b102d6..4ea70e5 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -107,7 +107,7 @@
kirkwood_init();
/* setup gpio pin select */
- if (machine_is_sheeva_esata())
+ if (machine_is_esata_sheevaplug())
kirkwood_mpp_conf(sheeva_esata_mpp_config);
else
kirkwood_mpp_conf(sheevaplug_mpp_config);
@@ -123,11 +123,11 @@
kirkwood_ge00_init(&sheevaplug_ge00_data);
/* honor lower power consumption for plugs with out eSATA */
- if (machine_is_sheeva_esata())
+ if (machine_is_esata_sheevaplug())
kirkwood_sata_init(&sheeva_esata_sata_data);
/* enable sd wp and sd cd on plugs with esata */
- if (machine_is_sheeva_esata())
+ if (machine_is_esata_sheevaplug())
kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
else
kirkwood_sdio_init(&sheevaplug_mvsdio_data);
@@ -144,6 +144,7 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -155,5 +156,6 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index ea104fb..966b2b3 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -207,4 +207,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 262c034..73e2b6c 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -138,4 +138,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index b68f5b4..5bbca26 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -182,4 +182,5 @@
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index a91f99d..255502d 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -228,4 +228,5 @@
.init_irq = ks8695_init_irq,
.init_machine = acs5k_init,
.timer = &ks8695_timer,
+ .restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index d24bcef..e0d36ce 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -126,4 +126,5 @@
.init_irq = ks8695_init_irq,
.init_machine = dsm320_init,
.timer = &ks8695_timer,
+ .restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 16c9565..a827072 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -58,4 +58,5 @@
.init_irq = ks8695_init_irq,
.init_machine = micrel_init,
.timer = &ks8695_timer,
+ .restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
index 2fbfab8..f8bdb11 100644
--- a/arch/arm/mach-ks8695/generic.h
+++ b/arch/arm/mach-ks8695/generic.h
@@ -12,4 +12,5 @@
extern __init void ks8695_map_io(void);
extern __init void ks8695_init_irq(void);
+extern void ks8695_restart(char, const char *);
extern struct sys_timer ks8695_timer;
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index fb1dda9..59fe992 100644
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -14,9 +14,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/regs-timer.h>
-
static void arch_idle(void)
{
/*
@@ -27,22 +24,4 @@
}
-static void arch_reset(char mode, const char *cmd)
-{
- unsigned int reg;
-
- if (mode == 's')
- cpu_reset(0);
-
- /* disable timer0 */
- reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
- __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-
- /* enable watchdog mode */
- __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
-
- /* re-enable timer0 */
- __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-}
-
#endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
deleted file mode 100644
index 744ac66..0000000
--- a/arch/arm/mach-ks8695/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/vmalloc.h
- *
- * Copyright (C) 2006 Ben Dooks
- * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
- *
- * KS8695 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK)
-
-#endif
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index a78092d..76802aa 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -23,7 +23,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 69c072c..37dfcd5 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -109,3 +109,21 @@
.offset = ks8695_gettimeoffset,
.resume = ks8695_timer_setup,
};
+
+void ks8695_restart(char mode, const char *cmd)
+{
+ unsigned int reg;
+
+ if (mode == 's')
+ soft_restart(0);
+
+ /* disable timer0 */
+ reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+ __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+ /* enable watchdog mode */
+ __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+ /* re-enable timer0 */
+ __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 205b2db..369b152 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -164,7 +164,7 @@
/*
* System reset via the watchdog timer
*/
-void lpc32xx_watchdog_reset(void)
+static void lpc32xx_watchdog_reset(void)
{
/* Make sure WDT clocks are enabled */
__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
@@ -311,3 +311,21 @@
{
iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
}
+
+void lpc23xx_restart(char mode, const char *cmd)
+{
+ switch (mode) {
+ case 's':
+ case 'h':
+ lpc32xx_watchdog_reset();
+ break;
+
+ default:
+ /* Do nothing */
+ break;
+ }
+
+ /* Wait for watchdog to reset system */
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 5583f52..4b4e700 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -39,6 +39,8 @@
extern void __init lpc32xx_map_io(void);
extern void __init lpc32xx_serial_init(void);
extern void __init lpc32xx_gpio_init(void);
+extern void lpc23xx_restart(char, const char *);
+
/*
* Structure used for setting up and querying the PLLS
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
index df3b0de..bf176c9 100644
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -24,29 +24,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- extern void lpc32xx_watchdog_reset(void);
-
- switch (mode) {
- case 's':
- case 'h':
- printk(KERN_CRIT "RESET: Rebooting system\n");
-
- /* Disable interrupts */
- local_irq_disable();
-
- lpc32xx_watchdog_reset();
- break;
-
- default:
- /* Do nothing */
- break;
- }
-
- /* Wait for watchdog to reset system */
- while (1)
- ;
-}
-
#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
deleted file mode 100644
index 720fa43..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF0000000UL
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 6d2f0d1..bfee5b4 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
@@ -388,4 +388,5 @@
.init_irq = lpc32xx_init_irq,
.timer = &lpc32xx_timer,
.init_machine = phy3250_board_init,
+ .restart = lpc23xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 7a60bbb..3e6dfab 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -243,6 +243,7 @@
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
+ .restart = pxa168_restart,
MACHINE_END
MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
@@ -251,4 +252,5 @@
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
+ .restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 39f0878..8de3dc6 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -45,4 +45,5 @@
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = avengers_lite_init,
+ .restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 983cfb1..e16f04b 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -219,4 +219,5 @@
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = brownstone_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 5720674..062b5b9 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -45,3 +45,8 @@
/* this is early, initialize mmp_chip_id here */
mmp_chip_id = __raw_readl(MMP_CHIPID);
}
+
+void mmp_restart(char mode, const char *cmd)
+{
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index ec8d65d..1c9d6c1 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -6,3 +6,4 @@
extern void __init icu_init_irq(void);
extern void __init mmp_map_io(void);
+extern void mmp_restart(char, const char *);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index c4fd806..5a6a27a 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -121,4 +121,5 @@
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = flint_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 6915656..1e3abbe 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -182,7 +182,7 @@
/* on-chip devices */
pxa168_add_uart(3);
- pxa168_add_ssp(0);
+ pxa168_add_ssp(1);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
pxa168_add_eth(&gplugd_eth_platform_data);
@@ -194,4 +194,5 @@
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = gplugd_init,
+ .restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
index d14eeaf..99b4ce1 100644
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -7,7 +7,7 @@
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 7fb568d..a677aa7 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -5,6 +5,7 @@
extern struct sys_timer pxa168_timer;
extern void __init pxa168_init_irq(void);
+extern void pxa168_restart(char, const char *);
extern void pxa168_clear_keypad_wakeup(void);
#include <linux/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
index 1a8a25e..1d001ea 100644
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -9,18 +9,8 @@
#ifndef __ASM_MACH_SYSTEM_H
#define __ASM_MACH_SYSTEM_H
-#include <mach/cputype.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (cpu_is_pxa168())
- cpu_reset(0xffff0000);
- else
- cpu_reset(0);
-}
#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
deleted file mode 100644
index 1d0bac0..0000000
--- a/arch/arm/mach-mmp/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 8bfac66..96cf5c8 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -175,4 +175,5 @@
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = jasper_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 76ca15c..13f2386 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -214,3 +214,8 @@
pxa168_device_usb_host.dev.platform_data = pdata;
return platform_device_register(&pxa168_device_usb_host);
}
+
+void pxa168_restart(char mode, const char *cmd)
+{
+ soft_restart(0xffff0000);
+}
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index eb5be87..257a212 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -103,4 +103,5 @@
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = tavorevb_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index bbe4727..8ac22a6 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -86,4 +86,5 @@
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = teton_bga_init,
+ .restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 4e91ee6..71fc4ee 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -25,7 +25,6 @@
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/sched.h>
#include <asm/sched_clock.h>
#include <mach/addr-map.h>
@@ -42,8 +41,6 @@
#define MAX_DELTA (0xfffffffe)
#define MIN_DELTA (16)
-static DEFINE_CLOCK_DATA(cd);
-
/*
* FIXME: the timer needs some delay to stablize the counter capture
*/
@@ -59,16 +56,9 @@
return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
}
-unsigned long long notrace sched_clock(void)
+static u32 notrace mmp_read_sched_clock(void)
{
- u32 cyc = timer_read();
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace mmp_update_sched_clock(void)
-{
- u32 cyc = timer_read();
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_read();
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -201,7 +191,7 @@
{
timer_config();
- init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE);
+ setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 176515a..f026588 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -159,4 +159,5 @@
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = ttc_dkb_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ebde97f..e6beaff 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -67,6 +67,7 @@
bool
config ARCH_MSM_SCORPIONMP
bool
+ select HAVE_SMP
config ARCH_MSM_ARM11
bool
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index 6dc1cbd..ed35981 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -99,6 +99,7 @@
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8960_sim_init,
MACHINE_END
@@ -108,6 +109,7 @@
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8960_rumi3_init,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 44bf716..0a11342 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -108,6 +108,7 @@
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
@@ -117,6 +118,7 @@
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
@@ -126,6 +128,7 @@
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
@@ -135,6 +138,7 @@
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 32b4657..97b8191 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -18,7 +18,7 @@
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/delay.h>
diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c
index 24030d0..0fb7a17 100644
--- a/arch/arm/mach-msm/devices-iommu.c
+++ b/arch/arm/mach-msm/devices-iommu.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
+#include <linux/module.h>
#include <mach/irqs.h>
#include <mach/iommu.h>
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
deleted file mode 100644
index 717076f..0000000
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Low-level IRQ helper macros
- *
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/entry-macro-gic.S>
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
deleted file mode 100644
index 70563ed..0000000
--- a/arch/arm/mach-msm/include/mach/entry-macro-vic.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <mach/msm_iomap.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- @ enable imprecise aborts
- cpsie a
- mov \base, #MSM_VIC_BASE
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ 0xD0 has irq# or old irq# if the irq has been handled
- @ 0xD4 has irq# or -1 if none pending *but* if you just
- @ read 0xD4 you never get the first irq for some reason
- ldr \irqnr, [\base, #0xD0]
- ldr \irqnr, [\base, #0xD4]
- cmp \irqnr, #0xffffffff
- .endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index b16f082..41f7003 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -16,8 +16,27 @@
*
*/
-#if defined(CONFIG_ARM_GIC)
-#include <mach/entry-macro-qgic.S>
-#else
-#include <mach/entry-macro-vic.S>
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+#if !defined(CONFIG_ARM_GIC)
+#include <mach/msm_iomap.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ @ enable imprecise aborts
+ cpsie a
+ mov \base, #MSM_VIC_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ 0xD0 has irq# or old irq# if the irq has been handled
+ @ 0xD4 has irq# or -1 if none pending *but* if you just
+ @ read 0xD4 you never get the first irq for some reason
+ ldr \irqnr, [\base, #0xD0]
+ ldr \irqnr, [\base, #0xD4]
+ cmp \irqnr, #0xffffffff
+ .endm
#endif
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index d2e83f4..311db2b 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,16 +12,8 @@
* GNU General Public License for more details.
*
*/
-
-#include <mach/hardware.h>
-
void arch_idle(void);
-static inline void arch_reset(char mode, const char *cmd)
-{
- for (;;) ; /* depends on IPC w/ other core */
-}
-
/* low level hardware reset hook -- for example, hitting the
* PSHOLD line on the PMIC to hard reset the system
*/
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
deleted file mode 100644
index d138448..0000000
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-msm/include/mach/vmalloc.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_VMALLOC_H
-#define __ASM_ARCH_MSM_VMALLOC_H
-
-#define VMALLOC_END 0xd0000000UL
-
-#endif
-
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
index 8736aff..0c56a5a 100644
--- a/arch/arm/mach-msm/smd_debug.c
+++ b/arch/arm/mach-msm/smd_debug.c
@@ -215,7 +215,7 @@
.llseek = default_llseek,
};
-static void debug_create(const char *name, mode_t mode,
+static void debug_create(const char *name, umode_t mode,
struct dentry *dent,
int (*fill)(char *buf, int max))
{
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 0e94268..ee74ec9 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -151,4 +151,5 @@
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
+ .restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 23d3980..5b9632b 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -401,3 +401,19 @@
feroceon_l2_init(is_l2_writethrough());
#endif
}
+
+void mv78xx0_restart(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 632e63d..07d5f8f 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -46,6 +46,7 @@
void mv78xx0_uart2_init(void);
void mv78xx0_uart3_init(void);
void mv78xx0_i2c_init(void);
+void mv78xx0_restart(char, const char *);
extern struct sys_timer mv78xx0_timer;
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 50b85ae..4d6d48b 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -99,4 +99,5 @@
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
+ .restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 66e7ce4..8c3a538 100644
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -9,28 +9,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/bridge-regs.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
deleted file mode 100644
index ba26fe9..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index e85222e..9a88270 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -84,4 +84,5 @@
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
+ .restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 1fc1103..944025d 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -297,4 +297,5 @@
.handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 52a11c1..9fbe923 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -335,4 +335,5 @@
.handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51sd_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index fc3621d..42b66e8 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -222,4 +222,5 @@
.handle_irq = imx50_handle_irq,
.timer = &mx50_rdp_timer,
.init_machine = mx50_rdp_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 0578390..83eab41 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -175,4 +175,5 @@
.handle_irq = imx51_handle_irq,
.timer = &mx51_3ds_timer,
.init_machine = mx51_3ds_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 5c83760..e4b822e 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -362,7 +362,7 @@
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
- PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+ PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
imx51_soc_init();
@@ -426,4 +426,5 @@
.handle_irq = imx51_handle_irq,
.timer = &mx51_babbage_timer,
.init_machine = mx51_babbage_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index a9e4866..3a5ed2d 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -182,7 +182,7 @@
.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
};
-void mx51_efikamx_reset(void)
+static void mx51_efikamx_restart(char mode, const char *cmd)
{
if (system_rev == 0x11)
gpio_direction_output(EFIKAMX_RESET1_1, 0);
@@ -292,4 +292,5 @@
.handle_irq = imx51_handle_irq,
.timer = &mx51_efikamx_timer,
.init_machine = mx51_efikamx_init,
+ .restart = mx51_efikamx_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 38c4a3e..ea5f65b 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -287,4 +287,5 @@
.handle_irq = imx51_handle_irq,
.init_machine = efikasb_board_init,
.timer = &mx51_efikasb_timer,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 0d7f0ff..5f224f1 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -257,4 +257,5 @@
.handle_irq = imx53_handle_irq,
.timer = &mx53_ard_timer,
.init_machine = mx53_ard_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 6bea31a..d6ce137 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -106,7 +106,7 @@
gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
@@ -175,4 +175,5 @@
.handle_irq = imx53_handle_irq,
.timer = &mx53_evk_timer,
.init_machine = mx53_evk_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 7678f77..fd8b524 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -242,7 +242,7 @@
gpio_set_value(LOCO_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
@@ -317,4 +317,5 @@
.handle_irq = imx53_handle_irq,
.timer = &mx53_loco_timer,
.init_machine = mx53_loco_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 59c0845..22c53c9 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -104,7 +104,7 @@
gpio_set_value(SMD_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
@@ -164,4 +164,5 @@
.handle_irq = imx53_handle_irq,
.timer = &mx53_smd_timer,
.init_machine = mx53_smd_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 5c53282..5e2e7a8 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <mach/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
static int mx5_cpu_rev = -1;
@@ -67,7 +67,8 @@
if (!cpu_is_mx51())
return 0;
- if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
+ if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
+ (elf_hwcap & HWCAP_NEON)) {
elf_hwcap &= ~HWCAP_NEON;
pr_info("Turning off NEON support, detected broken NEON implementation\n");
}
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
index ccc6158..e6bad17 100644
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -44,20 +44,22 @@
{ /* sentinel */ }
};
-static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+static int __init imx51_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
+ return 0;
}
-static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+static int __init imx51_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
- 32 * 4; /* imx51 gets 4 gpio ports */
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
+ gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
- gpio_irq_base += 32;
+
+ return 0;
}
static const struct of_device_id imx51_irq_match[] __initconst = {
@@ -113,4 +115,5 @@
.timer = &imx51_timer,
.init_machine = imx51_dt_init,
.dt_compat = imx51_dt_board_compat,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
index ccaa0b8..05ebb3e 100644
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -48,20 +48,22 @@
{ /* sentinel */ }
};
-static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+static int __init imx53_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
+ return 0;
}
-static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+static int __init imx53_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
- 32 * 7; /* imx53 gets 7 gpio ports */
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
+ gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
- gpio_irq_base += 32;
+
+ return 0;
}
static const struct of_device_id imx53_irq_match[] __initconst = {
@@ -123,4 +125,5 @@
.timer = &imx53_timer,
.init_machine = imx53_dt_init,
.dt_compat = imx53_dt_board_compat,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index 26eacc9..df4a508f 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -23,7 +23,9 @@
static void imx5_idle(void)
{
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if (!need_resched())
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ local_irq_enable();
}
/*
@@ -89,7 +91,7 @@
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- imx_idle = imx5_idle;
+ pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 229ae34..da6e4aa 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -404,7 +404,7 @@
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
reg &= ~BM_CLKCTRL_##dr##_DIV; \
reg |= div << BP_CLKCTRL_##dr##_DIV; \
- if (reg | (1 << clk->enable_shift)) { \
+ if (reg & (1 << clk->enable_shift)) { \
pr_err("%s: clock is gated\n", __func__); \
return -EINVAL; \
} \
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 635bb5d..1388485 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -16,6 +16,7 @@
extern const u32 *mxs_get_ocotp(void);
extern int mxs_reset_block(void __iomem *);
extern void mxs_timer_init(struct clk *, int);
+extern void mxs_restart(char, const char *);
extern int mx23_register_gpios(void);
extern int mx23_clocks_init(void);
diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
index 75d8611..30c7990 100644
--- a/arch/arm/mach-mxs/include/mach/mx28.h
+++ b/arch/arm/mach-mxs/include/mach/mx28.h
@@ -104,8 +104,8 @@
#define MX28_INT_CAN1 9
#define MX28_INT_LRADC_TOUCH 10
#define MX28_INT_HSADC 13
-#define MX28_INT_IRADC_THRESH0 14
-#define MX28_INT_IRADC_THRESH1 15
+#define MX28_INT_LRADC_THRESH0 14
+#define MX28_INT_LRADC_THRESH1 15
#define MX28_INT_LRADC_CH0 16
#define MX28_INT_LRADC_CH1 17
#define MX28_INT_LRADC_CH2 18
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 0d2d2b4..bde5f66 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -30,6 +30,7 @@
*/
#define cpu_is_mx23() ( \
machine_is_mx23evk() || \
+ machine_is_stmp378x() || \
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
index 0e42823..e7ad1bb 100644
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ b/arch/arm/mach-mxs/include/mach/system.h
@@ -22,6 +22,4 @@
cpu_do_idle();
}
-void arch_reset(char mode, const char *cmd);
-
#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/vmalloc.h b/arch/arm/mach-mxs/include/mach/vmalloc.h
deleted file mode 100644
index 103b016..0000000
--- a/arch/arm/mach-mxs/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2000 Russell King.
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_VMALLOC_H__
-#define __MACH_MXS_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END 0xf4000000UL
-
-#endif /* __MACH_MXS_VMALLOC_H__ */
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 3b1681e..2f27582 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -361,6 +361,7 @@
MACHINE_START(M28EVK, "DENX M28 EVK")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
- .init_machine = m28evk_init,
.timer = &m28evk_timer,
+ .init_machine = m28evk_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index c325fbe..5ea1c57 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -184,4 +184,5 @@
.init_irq = mx23_init_irq,
.timer = &mx23evk_timer,
.init_machine = mx23evk_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 064ec5a..d0cc37f 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -501,4 +501,5 @@
.init_irq = mx28_init_irq,
.timer = &mx28evk_timer,
.init_machine = mx28evk_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index 177e531..a626c07 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -115,6 +115,7 @@
MACHINE_START(STMP378X, "STMP378X")
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
- .init_machine = stmp378x_dvb_init,
.timer = &stmp378x_dvb_timer,
+ .init_machine = stmp378x_dvb_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 9a1f0e7..2c0862e 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -178,4 +178,5 @@
.init_irq = mx28_init_irq,
.timer = &tx28_timer,
.init_machine = tx28_stk5v3_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index 0fcff47..9a7b08b 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -66,11 +66,11 @@
MX28_PAD_ENET0_CRS__ENET1_RX_EN,
};
-static struct fec_platform_data tx28_fec0_data = {
+static const struct fec_platform_data tx28_fec0_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
-static struct fec_platform_data tx28_fec1_data = {
+static const struct fec_platform_data tx28_fec1_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 20ec3bd..b936633 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -42,7 +42,7 @@
/*
* Reset the system. It is called by machine_restart().
*/
-void arch_reset(char mode, const char *cmd)
+void mxs_restart(char mode, const char *cmd)
{
/* reset the chip */
__mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
@@ -53,7 +53,7 @@
mdelay(50);
/* We'll take a jump through zero as a poor second */
- cpu_reset(0);
+ soft_restart(0);
}
static int __init mxs_arch_reset_init(void)
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 00023b5..59e6797 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -187,3 +187,8 @@
subsys_initcall(netx_init);
+void netx_restart(char mode, const char *cmd)
+{
+ writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
+ NETX_SYSTEM_RES_CR);
+}
diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h
index ede2d35..9b91511 100644
--- a/arch/arm/mach-netx/generic.h
+++ b/arch/arm/mach-netx/generic.h
@@ -19,6 +19,7 @@
extern void __init netx_map_io(void);
extern void __init netx_init_irq(void);
+extern void netx_restart(char, const char *);
struct sys_timer;
extern struct sys_timer netx_timer;
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index 844f1f9..6e9f1cb 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -18,22 +18,9 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <mach/hardware.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =io_p2v(0x001ff000)
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #0]
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
- cmp \irqstat, #0
- .endm
-
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
index dc7b4bc..b38fa36 100644
--- a/arch/arm/mach-netx/include/mach/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -19,20 +19,10 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include "netx-regs.h"
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
- NETX_SYSTEM_RES_CR);
-}
-
#endif
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
deleted file mode 100644
index 871f1ef..0000000
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/vmalloc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 90903dd..180ea89 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <mach/eth.h>
@@ -203,6 +204,8 @@
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxdb500_init,
+ .restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index c63384a..58009e2 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <mach/eth.h>
@@ -96,6 +97,8 @@
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxdkn_init,
+ .restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 8f548ec..122e998 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <mach/eth.h>
@@ -180,6 +181,8 @@
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxeb500hmi_init,
+ .restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 0cbb74c..7c878bf 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -21,6 +21,7 @@
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -34,6 +35,8 @@
#include <mach/nand.h>
#include <mach/fsmc.h>
+#include "cpu-8815.h"
+
/* Initial value for SRC control register: all timers use MXTAL/8 source */
#define SRC_CR_INIT_MASK 0x00007fff
#define SRC_CR_INIT_VAL 0x2aaa8000
@@ -280,6 +283,8 @@
.atag_offset = 0x100,
.map_io = cpu8815_map_io,
.init_irq = cpu8815_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &nomadik_timer,
.init_machine = nhk8815_platform_init,
+ .restart = cpu8815_restart,
MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index dc67717..65df7b4 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -21,6 +21,7 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
@@ -32,6 +33,7 @@
#include <asm/hardware/cache-l2x0.h>
#include "clock.h"
+#include "cpu-8815.h"
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
@@ -164,3 +166,13 @@
#endif
return;
}
+
+void cpu8815_restart(char mode, const char *cmd)
+{
+ void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+ /* FIXME: use egpio when implemented */
+
+ /* Write anything to Reset status register */
+ writel(1, src_rstsr);
+}
diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h
new file mode 100644
index 0000000..71c21e8
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.h
@@ -0,0 +1,4 @@
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern void cpu8815_restart(char, const char *);
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
index 49f1aa3..98ea1c1 100644
--- a/arch/arm/mach-nomadik/include/mach/entry-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -6,38 +6,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(NOMADIK_IC_BASE)
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- /* This stanza gets the irq mask from one of two status registers */
- mov \irqnr, #0
- ldr \irqstat, [\base, #VIC_REG_IRQSR0] @ get masked status
- cmp \irqstat, #0
- bne 1001f
- add \irqnr, \irqnr, #32
- ldr \irqstat, [\base, #VIC_REG_IRQSR1] @ get masked status
-
-1001: tst \irqstat, #15
- bne 1002f
- add \irqnr, \irqnr, #4
- movs \irqstat, \irqstat, lsr #4
- bne 1001b
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
- .endm
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index b7897ed..bcaeaf4 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -12,9 +12,6 @@
#ifdef CONFIG_NOMADIK_8815
-extern void cpu8815_map_io(void);
-extern void cpu8815_platform_init(void);
-extern void cpu8815_init_irq(void);
extern void nmdk_timer_init(void);
#endif /* NOMADIK_8815 */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
index 7119f68..25e198b 100644
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -20,9 +20,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
/*
@@ -32,14 +29,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
-
- /* FIXME: use egpio when implemented */
-
- /* Write anything to Reset status register */
- writel(1, src_rstsr);
-}
-
#endif
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
deleted file mode 100644
index f83d574..0000000
--- a/arch/arm/mach-nomadik/include/mach/vmalloc.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-#define VMALLOC_END 0xe8000000UL
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index e0a0281..73f287d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -171,14 +171,6 @@
comment "OMAP CPU Speed"
depends on ARCH_OMAP1
-config OMAP_CLOCKS_SET_BY_BOOTLOADER
- bool "OMAP clocks set by bootloader"
- depends on ARCH_OMAP1
- help
- Enable this option to prevent the kernel from overriding the clock
- frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
- internal LCD controller and MPU peripherals.
-
config OMAP_ARM_216MHZ
bool "OMAP ARM 216 MHz CPU (1710 only)"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 51bae31..88909cc 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -35,7 +35,7 @@
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <mach/camera.h>
#include <mach/ams-delta-fiq.h>
@@ -302,8 +302,6 @@
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
- iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-
omap_board_config = ams_delta_config;
omap_board_config_size = ARRAY_SIZE(ams_delta_config);
omap_serial_init();
@@ -373,15 +371,22 @@
}
arch_initcall(ams_delta_modem_init);
+static void __init ams_delta_map_io(void)
+{
+ omap15xx_map_io();
+ iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.atag_offset = 0x100,
- .map_io = omap15xx_map_io,
+ .map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
EXPORT_SYMBOL(ams_delta_latch1_write);
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 2317827..0b9464b 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -32,7 +32,7 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
/* fsample is pretty close to p2-sample */
@@ -390,4 +390,5 @@
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index dc5b75d..9a5fe58 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -25,7 +25,7 @@
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
/* assume no Mini-AB port */
@@ -89,4 +89,5 @@
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index b334b14..00ad6b2 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -43,7 +43,7 @@
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include "board-h2.h"
@@ -456,4 +456,5 @@
.init_irq = omap1_init_irq,
.init_machine = h2_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 74ebe72..4a7f251 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include "board-h3.h"
@@ -444,4 +444,5 @@
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 3e91baa..731cc3d 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -41,7 +41,7 @@
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
@@ -610,4 +610,5 @@
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 273153d..309369e 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -37,7 +37,7 @@
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/mmc.h>
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
@@ -460,4 +460,5 @@
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 6798b84..f9efc03 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -30,7 +30,7 @@
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
@@ -259,4 +259,5 @@
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index c385927..675de06 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,7 +51,7 @@
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
-#include <plat/common.h>
+#include "common.h"
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
#define OMAP_OSK_ETHR_START 0x04800300
@@ -578,4 +578,5 @@
.init_irq = omap1_init_irq,
.init_machine = osk_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index f9c44cb..81fa27f 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -41,7 +41,7 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
@@ -270,4 +270,5 @@
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 11a9853..81cb821 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -39,7 +39,7 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -317,4 +317,5 @@
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 4206157..e881945 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -41,7 +41,7 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -334,4 +334,5 @@
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 203ae07..c000bed 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -32,7 +32,7 @@
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
static const unsigned int p2_keymap[] = {
@@ -352,4 +352,5 @@
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 092a4c0..7bcd82a 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -40,7 +40,7 @@
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/keypad.h>
#include <plat/board-sx1.h>
@@ -416,4 +416,5 @@
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 61ed6cd..f83a502d 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -28,13 +28,12 @@
#include <linux/export.h>
#include <mach/hardware.h>
-#include <mach/system.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board-voiceblue.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
@@ -221,7 +220,7 @@
gpio_set_value(0, wdt_gpio_state);
}
-static void voiceblue_reset(char mode, const char *cmd)
+static void voiceblue_restart(char mode, const char *cmd)
{
/*
* Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -285,8 +284,6 @@
* (it is connected through invertor) */
omap_writeb(0x00, OMAP_LPG1_LCR);
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
-
- arch_reset = voiceblue_reset;
}
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
@@ -298,4 +295,5 @@
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.timer = &omap1_timer,
+ .restart = voiceblue_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index eaf09ef..16b1423 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,7 +17,8 @@
#include <plat/clock.h>
-extern int __init omap1_clk_init(void);
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
extern int omap1_clk_enable(struct clk *clk);
extern void omap1_clk_disable(struct clk *clk);
extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9..9ff90a7 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -16,6 +16,8 @@
#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <asm/mach-types.h> /* for machine_is_* */
@@ -767,6 +769,15 @@
.clk_disable_unused = omap1_clk_disable_unused,
};
+static void __init omap1_show_rates(void)
+{
+ pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+ "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+ ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+ ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+ arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
int __init omap1_clk_init(void)
{
struct omap_clk *c;
@@ -835,9 +846,12 @@
/* We want to be in syncronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
- /* Use values set by bootloader. Determine PLL rate and recalculate
- * dependent clocks as if kernel had changed PLL or divisors.
+
+ /*
+ * Initially use the values set by bootloader. Determine PLL rate and
+ * recalculate dependent clocks as if kernel had changed PLL or
+ * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+ * after the SRAM is initialized.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@@ -862,25 +876,10 @@
}
}
}
-#else
- /* Find the highest supported frequency and enable it */
- if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
- printk(KERN_ERR "System frequencies not set. Check your config.\n");
- /* Guess sane values (60MHz) */
- omap_writew(0x2290, DPLL_CTL);
- omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
- ck_dpll1.rate = 60000000;
- }
-#endif
propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
- printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
- "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
- ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
- ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
- arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+ omap1_show_rates();
if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -925,3 +924,27 @@
return 0;
}
+
+#define OMAP1_DPLL1_SANE_VALUE 60000000
+
+void __init omap1_clk_late_init(void)
+{
+ unsigned long rate = ck_dpll1.rate;
+
+ if (rate >= OMAP1_DPLL1_SANE_VALUE)
+ return;
+
+ /* System booting at unusable rate, force reprogramming of DPLL1 */
+ ck_dpll1_p->rate = 0;
+
+ /* Find the highest supported frequency and enable it */
+ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+ pr_err("System frequencies not set, using default. Check your config.\n");
+ omap_writew(0x2290, DPLL_CTL);
+ omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
+ ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+ }
+ propagate_rate(&ck_dpll1);
+ omap1_show_rates();
+ loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
+}
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
new file mode 100644
index 0000000..a9a5146
--- /dev/null
+++ b/arch/arm/mach-omap1/common.h
@@ -0,0 +1,62 @@
+/*
+ *
+ * Header for code common to all OMAP1 machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
+#define __ARCH_ARM_MACH_OMAP1_COMMON_H
+
+#include <plat/common.h>
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap7xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
+void omap1_init_irq(void);
+void omap1_restart(char, const char *);
+
+extern struct sys_timer omap1_timer;
+extern bool omap_32k_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 48ef988..1d76a63 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,7 +22,7 @@
#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
@@ -30,6 +30,8 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
+#include "clock.h"
+
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -293,6 +295,7 @@
return -ENODEV;
omap_sram_init();
+ omap1_clk_late_init();
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
deleted file mode 100644
index 22ec4a47..0000000
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd8000000UL
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 7969cfd..8e55b6f 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -121,7 +121,6 @@
void omap1_init_early(void)
{
omap_check_revision();
- omap_ioremap_init();
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index ad951ee..91d199b 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -5,10 +5,9 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/system.h>
#include <plat/prcm.h>
-void omap1_arch_reset(char mode, const char *cmd)
+void omap1_restart(char mode, const char *cmd)
{
/*
* Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -21,5 +20,3 @@
omap_writew(1, ARM_RSTCT1);
}
-
-void (*arch_reset)(char, const char *) = omap1_arch_reset;
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a183777..b8faffa 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -37,7 +37,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -54,7 +53,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <plat/common.h>
+#include "common.h"
#ifdef CONFIG_OMAP_MPU_TIMER
@@ -190,30 +189,9 @@
* ---------------------------------------------------------------------------
*/
-static DEFINE_CLOCK_DATA(cd);
-
-static inline unsigned long long notrace _omap_mpu_sched_clock(void)
+static u32 notrace omap_mpu_read_sched_clock(void)
{
- u32 cyc = ~omap_mpu_timer_read(1);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-#ifndef CONFIG_OMAP_32K_TIMER
-unsigned long long notrace sched_clock(void)
-{
- return _omap_mpu_sched_clock();
-}
-#else
-static unsigned long long notrace omap_mpu_sched_clock(void)
-{
- return _omap_mpu_sched_clock();
-}
-#endif
-
-static void notrace mpu_update_sched_clock(void)
-{
- u32 cyc = ~omap_mpu_timer_read(1);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return ~omap_mpu_timer_read(1);
}
static void __init omap_init_clocksource(unsigned long rate)
@@ -223,7 +201,7 @@
"%s: can't register clocksource!\n";
omap_mpu_timer_start(1, ~0, 1);
- init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
+ setup_sched_clock(omap_mpu_read_sched_clock, 32, rate);
if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
300, 32, clocksource_mmio_readl_down))
@@ -254,30 +232,6 @@
}
#endif /* CONFIG_OMAP_MPU_TIMER */
-#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER)
-static unsigned long long (*preferred_sched_clock)(void);
-
-unsigned long long notrace sched_clock(void)
-{
- if (!preferred_sched_clock)
- return 0;
-
- return preferred_sched_clock();
-}
-
-static inline void preferred_sched_clock_init(bool use_32k_sched_clock)
-{
- if (use_32k_sched_clock)
- preferred_sched_clock = omap_32k_sched_clock;
- else
- preferred_sched_clock = omap_mpu_sched_clock;
-}
-#else
-static inline void preferred_sched_clock_init(bool use_32k_sched_clcok)
-{
-}
-#endif
-
static inline int omap_32k_timer_usable(void)
{
int res = false;
@@ -299,12 +253,8 @@
*/
static void __init omap1_timer_init(void)
{
- if (omap_32k_timer_usable()) {
- preferred_sched_clock_init(1);
- } else {
+ if (!omap_32k_timer_usable())
omap_mpu_timer_init();
- preferred_sched_clock_init(0);
- }
}
struct sys_timer omap1_timer = {
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 96604a5..9a54ef4 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -52,7 +52,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dmtimer.h>
/*
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5034147..4f01533 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,6 +25,7 @@
depends on ARCH_OMAP2PLUS
default y
select CPU_V6
+ select MULTI_IRQ_HANDLER
config ARCH_OMAP3
bool "TI OMAP3"
@@ -36,13 +37,16 @@
select ARCH_HAS_OPP
select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
+ select MULTI_IRQ_HANDLER
config ARCH_OMAP4
bool "TI OMAP4"
default y
depends on ARCH_OMAP2PLUS
+ select CACHE_L2X0
select CPU_V7
select ARM_GIC
+ select HAVE_SMP
select LOCAL_TIMERS if SMP
select PL310_ERRATA_588369
select PL310_ERRATA_727915
@@ -334,6 +338,7 @@
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends on ARCH_OMAP3
+ select ARM_AMBA
select OC_ETM
help
Say Y here to enable debugging hardware of omap3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 69ab1c0..b009f17 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o
+ common.o gpio.o dma.o wd_timer.o display.o
omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
@@ -264,7 +264,4 @@
obj-y += $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
-disp-$(CONFIG_OMAP2_DSS) := display.o
-obj-y += $(disp-m) $(disp-y)
-
obj-y += common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d704f0a..7370983 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -34,7 +34,7 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
@@ -301,6 +301,8 @@
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 77142c1..9996334 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -33,7 +33,7 @@
#include <plat/mcspi.h>
#include <plat/board.h>
#include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
@@ -728,6 +728,8 @@
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index f552305..6ef350d 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -16,7 +16,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/gpmc-smc91x.h>
#include <plat/usb.h>
@@ -215,6 +215,8 @@
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 5156468..bad5d5a 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -27,13 +27,13 @@
#include <linux/leds_pwm.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
@@ -984,6 +984,8 @@
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 7834536..c3851e8 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -27,7 +27,7 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include "mux.h"
@@ -98,6 +98,8 @@
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d314f03..f5a3a3f 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -32,7 +32,7 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
@@ -491,6 +491,8 @@
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index de8134b..ac77382 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -37,7 +37,7 @@
#include <plat/led.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <video/omapdss.h>
@@ -354,6 +354,8 @@
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index bd1bcac..1545102 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -37,7 +37,7 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
@@ -634,8 +634,10 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
@@ -644,6 +646,8 @@
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 3f4dc66..f36d694 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -39,7 +39,7 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/nand.h>
#include <plat/gpmc.h>
@@ -299,6 +299,8 @@
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 90154e4..e873063 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -41,7 +41,7 @@
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@@ -660,6 +660,8 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fb55fa3d..f8c5b2c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,8 +20,7 @@
#include <asm/mach/arch.h>
#include <plat/board.h>
-#include <plat/common.h>
-#include <mach/omap4-common.h>
+#include "common.h"
#include "common-board-devices.h"
/*
@@ -107,6 +106,7 @@
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
+ .restart = omap_prcm_restart,
MACHINE_END
#endif
@@ -122,9 +122,11 @@
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap243x_boards_compat,
+ .restart = omap_prcm_restart,
MACHINE_END
#endif
@@ -143,6 +145,7 @@
.init_machine = omap3_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
+ .restart = omap_prcm_restart,
MACHINE_END
#endif
@@ -161,5 +164,6 @@
.init_machine = omap4_init,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
+ .restart = omap_prcm_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8b351d9..54af800 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -34,7 +34,7 @@
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
@@ -396,6 +396,8 @@
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d0a3f78..a59ace0 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -28,7 +28,7 @@
#include <asm/mach/arch.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
@@ -672,8 +672,10 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -682,6 +684,8 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index e179da0..2d2a61f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -36,7 +36,7 @@
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
@@ -434,6 +434,8 @@
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e9d5f4a..cef2cf1 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -26,7 +26,7 @@
#include <asm/mach-types.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/menelaus.h>
#include <mach/irqs.h>
#include <plat/mcspi.h>
@@ -689,8 +689,10 @@
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
@@ -699,8 +701,10 @@
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
@@ -709,6 +713,8 @@
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4a71cb7..7ffcd28 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -40,7 +40,7 @@
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
@@ -559,6 +559,8 @@
.map_io = omap3_map_io,
.init_early = omap3_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ec00b2e..003fe34 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,7 +43,7 @@
#include <plat/board.h>
#include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
@@ -681,6 +681,8 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7c0f193..4198dd0 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -40,7 +40,7 @@
#include <plat/mux.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc-smsc911x.h>
#include <plat/gpmc.h>
#include <plat/sdrc.h>
@@ -208,8 +208,10 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
@@ -217,6 +219,8 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index f7811f4..1644b73 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -41,7 +41,7 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
@@ -606,6 +606,8 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index ddb7d66..cb089a4 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -35,7 +35,7 @@
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@@ -454,6 +454,8 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index a2d0d19..a0b851a 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -44,7 +44,7 @@
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@@ -381,6 +381,8 @@
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index a8c2c42..8b06c6a 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,14 +30,14 @@
#include <linux/wl12xx.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-dvi.h>
@@ -577,6 +577,8 @@
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4cf7aea..52c0cef 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -43,7 +43,7 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
@@ -562,6 +562,8 @@
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 616fb39..8678b38 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -25,7 +25,7 @@
#include <plat/mmc.h>
#include <plat/usb.h>
#include <plat/gpmc.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/onenand.h>
#include "mux.h"
@@ -149,6 +149,8 @@
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ba1aa07..108fee6 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,7 +27,7 @@
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/onenand.h>
@@ -193,7 +193,7 @@
static void __init rx51_charger_init(void)
{
WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
- GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+ GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
platform_device_register(&rx51_charger_device);
}
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 4af7c4b..27f01f0 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -25,7 +25,7 @@
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
@@ -127,6 +127,8 @@
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index e6ee884..74713e3 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -22,7 +22,7 @@
#include <plat/irqs.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
};
@@ -48,4 +48,5 @@
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6d0aa4f..8d7ce11 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -24,7 +24,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index be6684d..5c20bcc 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -21,7 +21,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/usb.h>
@@ -135,8 +135,10 @@
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
@@ -145,6 +147,8 @@
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 38830d8..04d39cd 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c
index e96f53e..6a83630 100644
--- a/arch/arm/mach-omap2/cm44xx.c
+++ b/arch/arm/mach-omap2/cm44xx.c
@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index eb2a472..6204dea 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -20,7 +20,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 110e5b9..684b8a7 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -17,7 +17,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/mux.h>
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
new file mode 100644
index 0000000..cda888a
--- /dev/null
+++ b/arch/arm/mach-omap2/common.h
@@ -0,0 +1,186 @@
+/*
+ * Header for code common to all OMAP2+ machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+
+#include <linux/delay.h>
+#include <plat/common.h>
+
+#ifdef CONFIG_SOC_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
+extern void omap2_init_common_infrastructure(void);
+
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
+
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void omap3_init_early(void); /* Do not use this one */
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+void omap_prcm_restart(char, const char *);
+
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
+struct omap_globals {
+ u32 class; /* OMAP class to detect */
+ void __iomem *tap; /* Control module ID code */
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *ctrl_pad; /* PAD Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+ void __iomem *cm2;
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_3xxx(void);
+void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+void omap242x_map_io(void);
+void omap243x_map_io(void);
+void omap3_map_io(void);
+void omap4_map_io(void);
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed. To use, define some integer @index in the
+ * calling code. After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index) \
+({ \
+ for (index = 0; index < timeout; index++) { \
+ if (cond) \
+ break; \
+ udelay(1); \
+ } \
+})
+
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_iva_device(void);
+extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
+
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti816x_init_irq(void);
+extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
+void omap2_intc_handle_irq(struct pt_regs *regs);
+void omap3_intc_handle_irq(struct pt_regs *regs);
+
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define do_wfi() \
+ __asm__ __volatile__ (".word 0xe320f003" : : : "memory")
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
+
+#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index e34d27f..114c037 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/sdrc.h>
#include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 1fe35c2..e20332f 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -24,6 +24,7 @@
#include <linux/sched.h>
#include <linux/cpuidle.h>
+#include <linux/export.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
@@ -33,6 +34,7 @@
#include "pm.h"
#include "control.h"
+#include "common.h"
#ifdef CONFIG_CPU_IDLE
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index adb2756..bc6cf86 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -22,13 +22,41 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/delay.h>
#include <video/omapdss.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
+#include "common.h"
#include "control.h"
+#include "display.h"
+
+#define DISPC_CONTROL 0x0040
+#define DISPC_CONTROL2 0x0238
+#define DISPC_IRQSTATUS 0x0018
+
+#define DSS_SYSCONFIG 0x10
+#define DSS_SYSSTATUS 0x14
+#define DSS_CONTROL 0x40
+#define DSS_SDI_CONTROL 0x44
+#define DSS_PLL_CONTROL 0x48
+
+#define LCD_EN_MASK (0x1 << 0)
+#define DIGIT_EN_MASK (0x1 << 1)
+
+#define FRAMEDONE_IRQ_SHIFT 0
+#define EVSYNC_EVEN_IRQ_SHIFT 2
+#define EVSYNC_ODD_IRQ_SHIFT 3
+#define FRAMEDONE2_IRQ_SHIFT 22
+#define FRAMEDONETV_IRQ_SHIFT 24
+
+/*
+ * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
+ * reset before deciding that something has gone wrong
+ */
+#define FRAMEDONE_IRQ_TIMEOUT 100
static struct platform_device omap_display_device = {
.name = "omapdss",
@@ -172,3 +200,135 @@
return r;
}
+
+static void dispc_disable_outputs(void)
+{
+ u32 v, irq_mask = 0;
+ bool lcd_en, digit_en, lcd2_en = false;
+ int i;
+ struct omap_dss_dispc_dev_attr *da;
+ struct omap_hwmod *oh;
+
+ oh = omap_hwmod_lookup("dss_dispc");
+ if (!oh) {
+ WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
+ return;
+ }
+
+ if (!oh->dev_attr) {
+ pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
+ return;
+ }
+
+ da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
+
+ /* store value of LCDENABLE and DIGITENABLE bits */
+ v = omap_hwmod_read(oh, DISPC_CONTROL);
+ lcd_en = v & LCD_EN_MASK;
+ digit_en = v & DIGIT_EN_MASK;
+
+ /* store value of LCDENABLE for LCD2 */
+ if (da->manager_count > 2) {
+ v = omap_hwmod_read(oh, DISPC_CONTROL2);
+ lcd2_en = v & LCD_EN_MASK;
+ }
+
+ if (!(lcd_en | digit_en | lcd2_en))
+ return; /* no managers currently enabled */
+
+ /*
+ * If any manager was enabled, we need to disable it before
+ * DSS clocks are disabled or DISPC module is reset
+ */
+ if (lcd_en)
+ irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
+
+ if (digit_en) {
+ if (da->has_framedonetv_irq) {
+ irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
+ } else {
+ irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
+ 1 << EVSYNC_ODD_IRQ_SHIFT;
+ }
+ }
+
+ if (lcd2_en)
+ irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
+
+ /*
+ * clear any previous FRAMEDONE, FRAMEDONETV,
+ * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
+ */
+ omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
+
+ /* disable LCD and TV managers */
+ v = omap_hwmod_read(oh, DISPC_CONTROL);
+ v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
+ omap_hwmod_write(v, oh, DISPC_CONTROL);
+
+ /* disable LCD2 manager */
+ if (da->manager_count > 2) {
+ v = omap_hwmod_read(oh, DISPC_CONTROL2);
+ v &= ~LCD_EN_MASK;
+ omap_hwmod_write(v, oh, DISPC_CONTROL2);
+ }
+
+ i = 0;
+ while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
+ irq_mask) {
+ i++;
+ if (i > FRAMEDONE_IRQ_TIMEOUT) {
+ pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
+ break;
+ }
+ mdelay(1);
+ }
+}
+
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+int omap_dss_reset(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_opt_clk *oc;
+ int c = 0;
+ int i, r;
+
+ if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
+ pr_err("dss_core: hwmod data doesn't contain reset data\n");
+ return -EINVAL;
+ }
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk)
+ clk_enable(oc->_clk);
+
+ dispc_disable_outputs();
+
+ /* clear SDI registers */
+ if (cpu_is_omap3430()) {
+ omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
+ omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
+ }
+
+ /*
+ * clear DSS_CONTROL register to switch DSS clock sources to
+ * PRCM clock, if any
+ */
+ omap_hwmod_write(0x0, oh, DSS_CONTROL);
+
+ omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+
+ if (c == MAX_MODULE_SOFTRESET_WAIT)
+ pr_warning("dss_core: waiting for reset to finish failed\n");
+ else
+ pr_debug("dss_core: softreset done\n");
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk)
+ clk_disable(oc->_clk);
+
+ r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+ return r;
+}
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
new file mode 100644
index 0000000..b871b017
--- /dev/null
+++ b/arch/arm/mach-omap2/display.h
@@ -0,0 +1,29 @@
+/*
+ * display.h - OMAP2+ integration-specific DSS header
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+
+#include <linux/kernel.h>
+
+struct omap_dss_dispc_dev_attr {
+ u8 manager_count;
+ bool has_framedonetv_irq;
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index ace9994..a12e224 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,7 +21,7 @@
#include <plat/cpu.h>
#include <plat/i2c.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap_hwmod.h>
#include "mux.h"
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 7f47092..27ad722 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -21,7 +21,7 @@
#include <asm/cputype.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <mach/id.h>
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index feb90a1..56964a0 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -10,146 +10,9 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
-#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
- /*
- * Configure the interrupt base on the first interrupt.
- * See also omap_irq_base_init for setting omap_irq_base.
- */
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =omap_irq_base @ irq base address
- ldr \base, [\base, #0] @ irq base value
- .endm
-
- /* Check the pending interrupts. Note that base already set */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- tst \base, #0x100 @ gic address?
- bne 4401f @ found gic
-
- /* Handle omap2 and omap3 */
- ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
- cmp \irqnr, #0x0
- bne 9998f
- ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
- cmp \irqnr, #0x0
- bne 9998f
- ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
- cmp \irqnr, #0x0
- bne 9998f
-
- /*
- * ti816x has additional IRQ pending register. Checking this
- * register on omap2 & omap3 has no effect (read as 0).
- */
- ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
- cmp \irqnr, #0x0
-9998:
- ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
- and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
- b 9999f
-
- /* Handle omap4 */
-4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
- ldr \tmp, =1021
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-9999:
- .endm
-
-#ifdef CONFIG_SMP
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt
- * on the controller, since this requires the original irqstat
- * value which we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- it cc
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- it cs
- cmpcs \irqnr, \irqnr
- .endm
-#endif /* CONFIG_SMP */
-
-#else /* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- .macro get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
- ldr \base, =OMAP2_IRQ_BASE
-#else
- ldr \base, =OMAP3_IRQ_BASE
-#endif
- .endm
-
- /* Check the pending interrupts. Note that base already set */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
- cmp \irqnr, #0x0
- bne 9999f
- ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
- cmp \irqnr, #0x0
- bne 9999f
- ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
- cmp \irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
- bne 9999f
- ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
- cmp \irqnr, #0x0
-#endif
-9999:
- ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
- and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
- .endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =OMAP4_IRQ_BASE
- .endm
-
-#endif
-
-#endif /* MULTI_OMAP2 */
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
deleted file mode 100644
index e4bd87619..0000000
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * omap4-common.h: OMAP4 specific common header file
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * Author:
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_OMAP4_COMMON_H
-#define OMAP_ARCH_OMAP4_COMMON_H
-
-/*
- * wfi used in low power code. Directly opcode is used instead
- * of instruction to avoid mulit-omap build break
- */
-#ifdef CONFIG_THUMB2_KERNEL
-#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
-#else
-#define do_wfi() \
- __asm__ __volatile__ (".word 0xe320f003" : : : "memory")
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-extern void __iomem *l2cache_base;
-#endif
-
-extern void __iomem *gic_dist_base_addr;
-
-extern void __init gic_init_irq(void);
-extern void omap_smc1(u32 fn, u32 arg);
-
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-#endif
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
deleted file mode 100644
index 8663199..0000000
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xf8000000UL
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 25d20ce..3f565dd 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -35,7 +35,7 @@
#include "clock3xxx.h"
#include "clock44xx.h"
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap-pm.h>
#include "voltage.h"
#include "powerdomain.h"
@@ -43,7 +43,7 @@
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
-#include <plat/common.h>
+#include "common.h"
/*
* The machine specific code may provide the extra mapping besides the
@@ -316,13 +316,9 @@
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
-/* See irq.c, omap4-common.c and entry-macro.S */
-void __iomem *omap_irq_base;
-
static void __init omap_common_init_early(void)
{
omap2_check_revision();
- omap_ioremap_init();
omap_init_consistent_dma_size();
}
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-omap2/io.h
+++ /dev/null
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 65f1be6..42b1d65 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -15,6 +15,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
@@ -35,6 +36,11 @@
/* Number of IRQ state bits in each MIR register */
#define IRQ_BITS_PER_REG 32
+#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
+#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
+
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
* controller is identified as its own "bank". Register definitions are
@@ -143,6 +149,7 @@
static void __init omap_init_irq(u32 base, int nr_irqs)
{
+ void __iomem *omap_irq_base;
unsigned long nr_of_irqs = 0;
unsigned int nr_banks = 0;
int i, j;
@@ -191,6 +198,44 @@
omap_init_irq(OMAP34XX_IC_BASE, 128);
}
+static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
+{
+ u32 irqnr;
+
+ do {
+ irqnr = readl_relaxed(base_addr + 0x98);
+ if (irqnr)
+ goto out;
+
+ irqnr = readl_relaxed(base_addr + 0xb8);
+ if (irqnr)
+ goto out;
+
+ irqnr = readl_relaxed(base_addr + 0xd8);
+#ifdef CONFIG_SOC_OMAPTI816X
+ if (irqnr)
+ goto out;
+ irqnr = readl_relaxed(base_addr + 0xf8);
+#endif
+
+out:
+ if (!irqnr)
+ break;
+
+ irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
+ irqnr &= ACTIVEIRQ_MASK;
+
+ if (irqnr)
+ handle_IRQ(irqnr, regs);
+ } while (irqnr);
+}
+
+asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
+{
+ void __iomem *base_addr = OMAP2_IRQ_BASE;
+ omap_intc_handle_irq(base_addr, regs);
+}
+
#ifdef CONFIG_ARCH_OMAP3
static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
@@ -263,4 +308,10 @@
/* Re-enable autoidle */
intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
}
+
+asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs)
+{
+ void __iomem *base_addr = OMAP3_IRQ_BASE;
+ omap_intc_handle_irq(base_addr, regs);
+}
#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 292eee3..28fcb27 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -145,6 +145,9 @@
pdata->reg_size = 4;
pdata->has_ccr = true;
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@@ -174,9 +177,6 @@
name, oh->name);
return PTR_ERR(pdev);
}
- pdata->set_clk_src = omap2_mcbsp_set_clk_src;
- if (id == 1)
- pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 4976b93..e5a1c3f 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -19,7 +19,8 @@
#include <linux/smp.h>
#include <asm/cacheflush.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
int platform_cpu_kill(unsigned int cpu)
{
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 4412ddb..e99bc6c 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,7 +24,8 @@
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
/* SCU base address */
static void __iomem *scu_base;
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 35ac3e5..beecfdd 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -22,17 +22,18 @@
#include <plat/irqs.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2cache_base;
#endif
-void __iomem *gic_dist_base_addr;
-
-
void __init gic_init_irq(void)
{
+ void __iomem *omap_irq_base;
+ void __iomem *gic_dist_base_addr;
+
/* Static mapping, never released */
gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
BUG_ON(!gic_dist_base_addr);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 6b3088d..529142a 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -137,7 +137,7 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include "clockdomain.h"
#include "powerdomain.h"
@@ -749,7 +749,7 @@
ohii = &oh->mpu_irqs[i++];
} while (ohii->irq != -1);
- return i;
+ return i-1;
}
/**
@@ -772,7 +772,7 @@
ohdi = &oh->sdma_reqs[i++];
} while (ohdi->dma_req != -1);
- return i;
+ return i-1;
}
/**
@@ -795,7 +795,7 @@
mem = &os->addr[i++];
} while (mem->pa_start != mem->pa_end);
- return i;
+ return i-1;
}
/**
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 6d72062..a5409ce 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -875,6 +875,10 @@
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ /*
+ * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+ * driver does not use these clocks.
+ */
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
@@ -899,7 +903,7 @@
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
- .flags = HWMOD_NO_IDLEST,
+ .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
/* l4_core -> dss_dispc */
@@ -939,6 +943,7 @@
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
+ .dev_attr = &omap2_3_dss_dispc_dev_attr
};
/* l4_core -> dss_rfbi */
@@ -961,6 +966,10 @@
&omap2420_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@@ -972,6 +981,8 @@
.module_offs = CORE_MOD,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
@@ -981,7 +992,7 @@
static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_dss_venc_hwmod,
- .clk = "dss_54m_fck",
+ .clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
@@ -1001,7 +1012,7 @@
static struct omap_hwmod omap2420_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
- .main_clk = "dss1_fck",
+ .main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a2580d0..c4f56cb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -942,6 +942,10 @@
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ /*
+ * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+ * driver does not use these clocks.
+ */
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
@@ -966,7 +970,7 @@
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
- .flags = HWMOD_NO_IDLEST,
+ .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
/* l4_core -> dss_dispc */
@@ -1000,6 +1004,7 @@
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
+ .dev_attr = &omap2_3_dss_dispc_dev_attr
};
/* l4_core -> dss_rfbi */
@@ -1016,6 +1021,10 @@
&omap2430_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@@ -1027,6 +1036,8 @@
.module_offs = CORE_MOD,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
@@ -1036,7 +1047,7 @@
static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_dss_venc_hwmod,
- .clk = "dss_54m_fck",
+ .clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1050,7 +1061,7 @@
static struct omap_hwmod omap2430_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
- .main_clk = "dss1_fck",
+ .main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c451729..c11273d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -11,6 +11,7 @@
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
#include <plat/dma.h>
+#include <plat/common.h>
#include <mach/irqs.h>
@@ -43,13 +44,15 @@
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
.sysc_fields = &omap_hwmod_sysc_type1,
};
struct omap_hwmod_class omap2_dss_hwmod_class = {
.name = "dss",
.sysc = &omap2_dss_sysc,
+ .reset = omap_dss_reset,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index bc9035e..eef43e2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1369,9 +1369,14 @@
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- { .role = "tv_clk", .clk = "dss_tv_fck" },
- { .role = "video_clk", .clk = "dss_96m_fck" },
+ /*
+ * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+ * driver does not use these clocks.
+ */
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+ { .role = "tv_clk", .clk = "dss_tv_fck" },
+ /* required only on OMAP3430 */
+ { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3430es1_dss_core_hwmod = {
@@ -1394,11 +1399,12 @@
.slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .flags = HWMOD_NO_IDLEST,
+ .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
static struct omap_hwmod omap3xxx_dss_core_hwmod = {
.name = "dss_core",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_alwon_fck", /* instead of dss_fck */
.sdma_reqs = omap3xxx_dss_sdma_chs,
@@ -1456,6 +1462,7 @@
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
+ .dev_attr = &omap2_3_dss_dispc_dev_attr
};
/*
@@ -1486,6 +1493,7 @@
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_dsi1_hwmod,
+ .clk = "dss_ick",
.addr = omap3xxx_dss_dsi1_addrs,
.fw = {
.omap2 = {
@@ -1502,6 +1510,10 @@
&omap3xxx_l4_core__dss_dsi1,
};
+static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss2_alwon_fck" },
+};
+
static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap3xxx_dsi_hwmod_class,
@@ -1514,6 +1526,8 @@
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = dss_dsi1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
.flags = HWMOD_NO_IDLEST,
@@ -1540,6 +1554,10 @@
&omap3xxx_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@@ -1551,6 +1569,8 @@
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
@@ -1560,7 +1580,7 @@
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_venc_hwmod,
- .clk = "dss_tv_fck",
+ .clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
@@ -1578,10 +1598,15 @@
&omap3xxx_l4_core__dss_venc,
};
+static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
+ /* required only on OMAP3430 */
+ { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+};
+
static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
- .main_clk = "dss1_alwon_fck",
+ .main_clk = "dss_tv_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -1589,6 +1614,8 @@
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = dss_venc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks),
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
.flags = HWMOD_NO_IDLEST,
@@ -3220,18 +3247,14 @@
/* 3430ES1-only hwmods */
static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3430es1_dss_core_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
/* 3430ES2+-only hwmods */
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 7695e5d..daaf165 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,6 +30,7 @@
#include <plat/mmc.h>
#include <plat/i2c.h>
#include <plat/dmtimer.h>
+#include <plat/common.h>
#include "omap_hwmod_common_data.h"
@@ -1187,6 +1188,7 @@
static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
.name = "dss",
.sysc = &omap44xx_dss_sysc,
+ .reset = omap_dss_reset,
};
/* dss */
@@ -1240,12 +1242,12 @@
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
{ .role = "tv_clk", .clk = "dss_tv_clk" },
- { .role = "dss_clk", .clk = "dss_dss_clk" },
- { .role = "video_clk", .clk = "dss_48mhz_clk" },
+ { .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
};
static struct omap_hwmod omap44xx_dss_hwmod = {
.name = "dss_core",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap44xx_dss_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
.main_clk = "dss_dss_clk",
@@ -1325,6 +1327,11 @@
{ }
};
+static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
+ .manager_count = 3,
+ .has_framedonetv_irq = 1
+};
+
/* l4_per -> dss_dispc */
static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
.master = &omap44xx_l4_per_hwmod,
@@ -1340,12 +1347,6 @@
&omap44xx_l4_per__dss_dispc,
};
-static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
- { .role = "sys_clk", .clk = "dss_sys_clk" },
- { .role = "tv_clk", .clk = "dss_tv_clk" },
- { .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap44xx_dispc_hwmod_class,
@@ -1359,10 +1360,9 @@
.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
- .opt_clks = dss_dispc_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
+ .dev_attr = &omap44xx_dss_dispc_dev_attr
};
/*
@@ -1624,7 +1624,7 @@
.clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
- .main_clk = "dss_dss_clk",
+ .main_clk = "dss_48mhz_clk",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
@@ -1785,7 +1785,7 @@
.name = "dss_venc",
.class = &omap44xx_venc_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
- .main_clk = "dss_dss_clk",
+ .main_clk = "dss_tv_clk",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index de832eb..51e5418 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -49,3 +49,7 @@
.srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
};
+struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
+ .manager_count = 2,
+ .has_framedonetv_irq = 0
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 39a7c37..ad5d8f0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -16,6 +16,8 @@
#include <plat/omap_hwmod.h>
+#include "display.h"
+
/* Common address space across OMAP2xxx */
extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
@@ -111,4 +113,6 @@
extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mcspi_class;
+extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
+
#endif
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 6a66aa5..d15225f 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -237,7 +237,7 @@
static const struct of_device_id l3_noc_match[] = {
{.compatible = "ti,omap4-l3-noc", },
{},
-}
+};
MODULE_DEVICE_TABLE(of, l3_noc_match);
#else
#define l3_noc_match NULL
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1e79bdf..1881fe9 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -18,12 +18,13 @@
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
-#include <plat/common.h>
+#include "common.h"
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include "pm.h"
+#include "twl-common.h"
static struct omap_device_pm_latency *pm_lats;
@@ -226,11 +227,8 @@
static int __init omap2_common_pm_late_init(void)
{
- /* Init the OMAP TWL parameters */
- omap3_twl_init();
- omap4_twl_init();
-
/* Init the voltage layer */
+ omap_pmic_late_init();
omap_voltage_late_init();
/* Initialize the voltages */
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index cf0c216..ef8595c 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -42,6 +42,7 @@
#include <plat/dma.h>
#include <plat/board.h>
+#include "common.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index efa6649..fa637df 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -42,6 +42,7 @@
#include <plat/gpmc.h>
#include <plat/dma.h>
+#include "common.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 59a870b..8edb015 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -16,8 +16,8 @@
#include <linux/err.h>
#include <linux/slab.h>
+#include "common.h"
#include "powerdomain.h"
-#include <mach/omap4-common.h>
struct power_state {
struct powerdomain *pwrdm;
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 597e2da..626acfa 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -25,8 +25,7 @@
#include <linux/delay.h>
#include <linux/export.h>
-#include <mach/system.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/prcm.h>
#include <plat/irqs.h>
@@ -59,7 +58,7 @@
EXPORT_SYMBOL(omap_prcm_get_reset_sources);
/* Resets clock rates and reboots the system. Only called from system.h */
-static void omap_prcm_arch_reset(char mode, const char *cmd)
+void omap_prcm_restart(char mode, const char *cmd)
{
s16 prcm_offs = 0;
@@ -110,8 +109,6 @@
omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
}
-void (*arch_reset)(char, const char *) = omap_prcm_arch_reset;
-
/**
* omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
* @reg: physical address of module IDLEST register
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
index 171fe17..ca669b5 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -15,7 +15,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "prcm_mpu44xx.h"
#include "cm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index f02d87f..9a08ba3 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -16,7 +16,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 495a31a..dd885ee 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,7 +17,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 3a7bab1..f6de5bc 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -16,7 +16,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prminst44xx.h"
diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c
index 14caa22..ee3a8ad 100644
--- a/arch/arm/mach-omap2/sdram-nokia.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -18,7 +18,7 @@
#include <linux/io.h>
#include <plat/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sdrc.h>
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 8f27828..e3d345f 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -23,7 +23,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sram.h>
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index ccdb010..791a63c 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,7 +24,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sram.h>
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 9992dbf..42c3267 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -33,7 +33,7 @@
#include <plat/omap-serial.h>
#endif
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/clock.h>
#include <plat/dma.h>
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 6a4f683..9dd9345 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -26,7 +26,7 @@
#include <linux/slab.h>
#include <linux/pm_runtime.h>
-#include <plat/common.h>
+#include "common.h"
#include "pm.h"
#include "smartreflex.h"
@@ -139,7 +139,7 @@
sr_write_reg(sr_info, ERRCONFIG_V1, status);
} else if (sr_info->ip_type == SR_TYPE_V2) {
/* Read the status bits */
- sr_read_reg(sr_info, IRQSTATUS);
+ status = sr_read_reg(sr_info, IRQSTATUS);
/* Clear them by writing back */
sr_write_reg(sr_info, IRQSTATUS, status);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 037b0d7..6eeff0e 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -41,7 +41,7 @@
#include <plat/dmtimer.h>
#include <asm/localtimer.h>
#include <asm/sched_clock.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
@@ -254,7 +254,6 @@
/*
* clocksource
*/
-static DEFINE_CLOCK_DATA(cd);
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
@@ -268,23 +267,12 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void notrace dmtimer_update_sched_clock(void)
+static u32 notrace dmtimer_read_sched_clock(void)
{
- u32 cyc;
-
- cyc = __omap_dm_timer_read_counter(&clksrc, 1);
-
- update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-unsigned long long notrace sched_clock(void)
-{
- u32 cyc = 0;
-
if (clksrc.reserved)
- cyc = __omap_dm_timer_read_counter(&clksrc, 1);
+ return __omap_dm_timer_read_counter(clksrc.io_base, 1);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+ return 0;
}
/* Setup free-running counter for clocksource */
@@ -301,7 +289,7 @@
__omap_dm_timer_load_start(&clksrc,
OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
- init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
+ setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
pr_err("Could not register clocksource %s\n",
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 52243577..10b20c6 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -30,6 +30,7 @@
#include <plat/usb.h>
#include "twl-common.h"
+#include "pm.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
@@ -48,6 +49,16 @@
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
+void __init omap_pmic_late_init(void)
+{
+ /* Init the OMAP TWL parameters (if PMIC has been registerd) */
+ if (!pmic_i2c_board_info.irq)
+ return;
+
+ omap3_twl_init();
+ omap4_twl_init();
+}
+
#if defined(CONFIG_ARCH_OMAP3)
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 5e83a5b..275dde8 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -1,6 +1,8 @@
#ifndef __OMAP_PMIC_COMMON__
#define __OMAP_PMIC_COMMON__
+#include <plat/irqs.h>
+
#define TWL_COMMON_PDATA_USB (1 << 0)
#define TWL_COMMON_PDATA_BCI (1 << 1)
#define TWL_COMMON_PDATA_MADC (1 << 2)
@@ -30,6 +32,7 @@
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
+void omap_pmic_late_init(void);
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index cfe348e..a5ec7f8f 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "voltage.h"
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index 2740a96..d70b930 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 1f8fdf7..8a36342 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -27,7 +27,7 @@
#include <linux/slab.h>
#include <linux/clk.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "prm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index 071101d..474559d 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index c4584e9..4e11d02 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -21,7 +21,7 @@
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index 66bd700..807391d 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -1,7 +1,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "voltage.h"
#include "vp.h"
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 260c554..bd89f80 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -19,7 +19,7 @@
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "voltage.h"
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index b4e7704..8c031d1 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -19,7 +19,7 @@
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 22ace0b..41127e8 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,6 +18,7 @@
#include <linux/mbus.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
+#include <linux/delay.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <asm/setup.h>
@@ -304,6 +305,17 @@
orion5x_wdt_init();
}
+void orion5x_restart(char mode, const char *cmd)
+{
+ /*
+ * Enable and issue soft reset
+ */
+ orion5x_setbits(RSTOUTn_MASK, (1 << 2));
+ orion5x_setbits(CPU_SOFT_RESET, 1);
+ mdelay(200);
+ orion5x_clrbits(CPU_SOFT_RESET, 1);
+}
+
/*
* Many orion-based systems have buggy bootloader implementations.
* This is a common fixup for bogus memory tags.
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 909489f..37ef18d 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -39,6 +39,7 @@
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
void orion5x_xor_init(void);
+void orion5x_restart(char, const char *);
/*
* PCIe/PCI functions.
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 8c83009..d75dcfa 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -343,6 +343,7 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
@@ -355,6 +356,7 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 4b79a80..a104d5a 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -364,4 +364,5 @@
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 343f60e..91b0f47 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -736,4 +736,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index 70a4e92..355e962 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -258,4 +258,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
index c519610..e9d9afd 100644
--- a/arch/arm/mach-orion5x/include/mach/io.h
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -15,31 +15,6 @@
#define IO_SPACE_LIMIT 0xffffffff
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
- void __iomem *retval;
- unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
- if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
- size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
- retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
- } else {
- retval = __arm_ioremap(paddr, size, mtype);
- }
-
- return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
- if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
- addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
- __iounmap(addr);
-}
-
-#define __arch_ioremap __arch_ioremap
-#define __arch_iounmap __arch_iounmap
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index a1d6e46..825a265 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -11,23 +11,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/bridge-regs.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable and issue soft reset
- */
- orion5x_setbits(RSTOUTn_MASK, (1 << 2));
- orion5x_setbits(CPU_SOFT_RESET, 1);
- mdelay(200);
- orion5x_clrbits(CPU_SOFT_RESET, 1);
-}
-
-
#endif
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
deleted file mode 100644
index 06b50ae..0000000
--- a/arch/arm/mach-orion5x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfd800000UL
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index d3cd3f6..47587b8 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -386,6 +386,7 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
@@ -399,5 +400,6 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 9503fff..5272131 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -140,7 +140,7 @@
static void lschl_power_off(void)
{
- arm_machine_restart('h', NULL);
+ orion5x_restart('h', NULL);
}
/*****************************************************************************
@@ -325,4 +325,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index ed6d772..9a8697b 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -186,7 +186,7 @@
static void ls_hgl_power_off(void)
{
- arm_machine_restart('h', NULL);
+ orion5x_restart('h', NULL);
}
@@ -272,4 +272,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 743f7f1..09c7365 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -186,7 +186,7 @@
static void lsmini_power_off(void)
{
- arm_machine_restart('h', NULL);
+ orion5x_restart('h', NULL);
}
@@ -274,5 +274,6 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 6020e26b..65faaa3 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -267,5 +267,6 @@
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
- .fixup = tag_fixup_mem32
+ .fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 201ae36..c87fde4 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -234,5 +234,6 @@
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
- .fixup = tag_fixup_mem32
+ .fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 6197c79..0180c39 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -426,5 +426,6 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index ebd6767..292038f 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -175,4 +175,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 05db2d3..c44eaba 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -187,4 +187,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index e47fa05..96438b6 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -311,4 +311,5 @@
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 6431725..2c5fab0 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -128,4 +128,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 29f1526..632a861 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -364,4 +364,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 31e51f9..5d64087 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -178,7 +178,7 @@
static int __init qnap_ts209_pci_init(void)
{
- if (machine_is_ts_x09())
+ if (machine_is_ts209())
pci_common_init(&qnap_ts209_pci);
return 0;
@@ -329,4 +329,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 0fbcc14..4e6ff75 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -318,4 +318,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index b35e200..c96f374 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -627,4 +627,5 @@
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index b8be7d8..078c03f 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -179,4 +179,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index faf81a0..46a9778 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -267,4 +267,5 @@
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index 34d0834..ad871bd 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -11,6 +11,7 @@
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
@@ -33,22 +34,20 @@
};
static const struct of_device_id vic_of_match[] __initconst = {
- { .compatible = "arm,pl192-vic" },
+ { .compatible = "arm,pl192-vic", .data = vic_of_init, },
{ /* Sentinel */ }
};
static void __init picoxcell_init_irq(void)
{
- vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
- vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
- irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
- irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+ of_irq_init(vic_of_match);
}
DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.map_io = picoxcell_map_io,
.nr_irqs = ARCH_NR_IRQS,
.init_irq = picoxcell_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &picoxcell_timer,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
index a6b09f7..9b505ac 100644
--- a/arch/arm/mach-picoxcell/include/mach/entry-macro.S
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -9,11 +9,8 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
+ .macro disable_fiq
+ .endm
-#define VA_VIC0 IO_ADDRESS(PICOXCELL_VIC0_BASE)
-#define VA_VIC1 IO_ADDRESS(PICOXCELL_VIC1_BASE)
-
-#include <asm/entry-macro-vic2.S>
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
index 67c589b..1a5d8cb 100644
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ b/arch/arm/mach-picoxcell/include/mach/system.h
@@ -23,9 +23,4 @@
cpu_do_idle();
}
-static inline void arch_reset(int mode, const char *cmd)
-{
- /* Watchdog reset to go here. */
-}
-
#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
deleted file mode 100644
index 0216cc4..0000000
--- a/arch/arm/mach-picoxcell/include/mach/vmalloc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
index 90a554f..6c89cf8 100644
--- a/arch/arm/mach-picoxcell/time.c
+++ b/arch/arm/mach-picoxcell/time.c
@@ -11,7 +11,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/sched.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
@@ -66,21 +65,11 @@
dw_apb_clocksource_register(cs);
}
-static DEFINE_CLOCK_DATA(cd);
static void __iomem *sched_io_base;
-unsigned long long notrace sched_clock(void)
+unsigned u32 notrace picoxcell_read_sched_clock(void)
{
- cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
-
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace picoxcell_update_sched_clock(void)
-{
- cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
-
- update_sched_clock(&cd, cyc, (u32)~0);
+ return __raw_readl(sched_io_base);
}
static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
@@ -100,7 +89,7 @@
timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
of_node_put(sched_timer);
- init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+ setup_sched_clock(picoxcell_read_sched_clock, 32, rate);
}
static const struct of_device_id picoxcell_timer_ids[] __initconst = {
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index cdb95e7..4cfb40b 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -260,6 +260,11 @@
iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
}
+static void pnx4008_restart(char mode, const char *cmd)
+{
+ soft_restart(0);
+}
+
extern struct sys_timer pnx4008_timer;
MACHINE_START(PNX4008, "Philips PNX4008")
@@ -269,4 +274,5 @@
.init_irq = pnx4008_init_irq,
.init_machine = pnx4008_init,
.timer = &pnx4008_timer,
+ .restart = pnx4008_restart,
MACHINE_END
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index 5dda2bb..60cfe71 100644
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -21,18 +21,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
static void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- cpu_reset(0);
-}
-
#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
deleted file mode 100644
index 184913c..0000000
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/vmalloc.h
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 83e5d212..b28a930 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -16,6 +16,7 @@
extern void __init sirfsoc_of_irq_init(void);
extern void __init sirfsoc_of_clk_init(void);
+extern void sirfsoc_restart(char, const char *);
#ifndef CONFIG_DEBUG_LL
static inline void sirfsoc_map_lluart(void) {}
diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h
index 66b1ae2..6f24353 100644
--- a/arch/arm/mach-prima2/include/mach/map.h
+++ b/arch/arm/mach-prima2/include/mach/map.h
@@ -9,8 +9,10 @@
#ifndef __MACH_PRIMA2_MAP_H__
#define __MACH_PRIMA2_MAP_H__
-#include <mach/vmalloc.h>
+#include <linux/const.h>
-#define SIRFSOC_VA(x) (VMALLOC_END + ((x) & 0x00FFF000))
+#define SIRFSOC_VA_BASE _AC(0xFEC00000, UL)
+
+#define SIRFSOC_VA(x) (SIRFSOC_VA_BASE + ((x) & 0x00FFF000))
#endif
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
index 0dbd257..2c7d2a9 100644
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ b/arch/arm/mach-prima2/include/mach/system.h
@@ -9,21 +9,9 @@
#ifndef __MACH_SYSTEM_H__
#define __MACH_SYSTEM_H__
-#include <linux/bitops.h>
-#include <mach/hardware.h>
-
-#define SIRFSOC_SYS_RST_BIT BIT(31)
-
-extern void __iomem *sirfsoc_rstc_base;
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
-}
-
#endif
diff --git a/arch/arm/mach-prima2/include/mach/vmalloc.h b/arch/arm/mach-prima2/include/mach/vmalloc.h
deleted file mode 100644
index c9f90fe..0000000
--- a/arch/arm/mach-prima2/include/mach/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/ach-prima2/include/mach/vmalloc.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <linux/const.h>
-
-#define VMALLOC_END _AC(0xFEC00000, UL)
-
-#endif
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index cb53160..26ebb57 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index ef555c0..02b9c05 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -8,6 +8,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/of.h>
@@ -39,4 +40,5 @@
.dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.dt_compat = prima2cb_dt_match,
+ .restart = sirfsoc_restart,
MACHINE_END
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index 492cfa8..762adb7 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -68,3 +68,10 @@
return 0;
}
+
+#define SIRFSOC_SYS_RST_BIT BIT(31)
+
+void sirfsoc_restart(char mode, const char *cmd)
+{
+ writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
+}
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index fc0b854..82514f5 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -307,7 +307,7 @@
/******************************************************************************
* USB Gadget
******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static void balloon3_udc_command(int cmd)
{
if (cmd == PXA2XX_UDC_CMD_CONNECT)
@@ -829,4 +829,5 @@
.timer = &pxa_timer,
.init_machine = balloon3_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d..c2f0be0 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -153,5 +153,6 @@
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
- .init_machine = capc7117_init
+ .init_machine = capc7117_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index f2e4190..ec170a5 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -524,4 +524,5 @@
#ifdef CONFIG_PCI
.dma_zone_size = SZ_64M,
#endif
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index e096bba..7236974 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -858,4 +858,5 @@
.timer = &pxa_timer,
.init_machine = cm_x300_init,
.fixup = cm_x300_fixup,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 80538b8..248804b 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -183,7 +183,7 @@
/******************************************************************************
* Backlight
******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct platform_pwm_backlight_data income_backlight_data = {
.pwm_id = 0,
.max_brightness = 0x3ff,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 05bfa1b..6a68516 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -313,6 +313,7 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
@@ -322,5 +323,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8b..c01059a 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -189,5 +189,6 @@
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 692e1ff..5028f23 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -146,7 +146,7 @@
static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
.gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
.gpio_pullup = -1,
@@ -259,5 +259,6 @@
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 549468d..9d4dc59 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -655,7 +655,7 @@
/* Green LED off tells the bootloader to halt */
gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
- arm_machine_restart('h', NULL);
+ pxa_restart('h', NULL);
}
static void corgi_restart(char mode, const char *cmd)
@@ -664,13 +664,12 @@
/* Green LED on tells the bootloader to reboot */
gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
- arm_machine_restart('h', cmd);
+ pxa_restart('h', cmd);
}
static void __init corgi_init(void)
{
pm_power_off = corgi_poweroff;
- arm_pm_restart = corgi_restart;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
@@ -726,6 +725,7 @@
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
@@ -737,6 +737,7 @@
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
@@ -748,6 +749,7 @@
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 5e2cf39..fb5a51d 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -278,4 +278,5 @@
.handle_irq = pxa27x_handle_irq,
.init_machine = csb726_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b..bd396ba 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1305,6 +1305,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(EXEDA, "Compulab eXeda")
@@ -1314,4 +1315,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d82b7aa..69473db 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -196,6 +196,7 @@
.fixup = eseries_fixup,
.init_machine = e330_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -246,6 +247,7 @@
.fixup = eseries_fixup,
.init_machine = e350_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -369,6 +371,7 @@
.fixup = eseries_fixup,
.init_machine = e400_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -558,6 +561,7 @@
.fixup = eseries_fixup,
.init_machine = e740_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -750,6 +754,7 @@
.fixup = eseries_fixup,
.init_machine = e750_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -955,5 +960,6 @@
.fixup = eseries_fixup,
.init_machine = e800_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 8308eee..15ab253 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -804,6 +804,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a780_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -870,6 +871,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e680_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -936,6 +938,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a1200_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1127,6 +1130,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a910_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1193,6 +1197,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e6_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1233,5 +1238,6 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e2_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 92a2e85..0d729e6 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -57,3 +57,5 @@
void __init pxa_set_btuart_info(void *info);
void __init pxa_set_stuart_info(void *info);
void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(char, const char *);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 9c8208c..ac3b1ce 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -106,7 +106,7 @@
}
#endif
-#ifdef CONFIG_USB_GADGET_PXA25X
+#ifdef CONFIG_USB_PXA25X
static struct gpio_vbus_mach_info gumstix_udc_info = {
.gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
.gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
@@ -239,4 +239,5 @@
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = gumstix_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 4b5e110..fde6b4c 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -209,4 +209,5 @@
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index f2c3245..26d069a 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -164,4 +164,5 @@
.handle_irq = pxa25x_handle_irq,
.init_machine = himalaya_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368e..ce16bda 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -845,4 +845,5 @@
.handle_irq = pxa27x_handle_irq,
.init_machine = hx4700_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db..e239b82 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -196,5 +196,6 @@
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
- .init_machine = icontrol_init
+ .init_machine = icontrol_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5..fbabd84 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -199,4 +199,5 @@
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = idp_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index a73bc86..260c0c1 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -7,45 +7,9 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/irqs.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
- mov \tmp, \tmp, lsr #13
- and \tmp, \tmp, #0x7 @ Core G
- cmp \tmp, #1
- bhi 1002f
-
- @ Core Generation 1 (PXA25x)
- mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000
- add \base, \base, #0x00d00000
- ldr \irqstat, [\base, #0] @ ICIP
- ldr \irqnr, [\base, #4] @ ICMR
-
- ands \irqnr, \irqstat, \irqnr
- beq 1001f
- rsb \irqstat, \irqnr, #0
- and \irqstat, \irqstat, \irqnr
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
- b 1001f
-1002:
- @ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
- mrc p6, 0, \irqstat, c5, c0, 0 @ ICHP
- tst \irqstat, #0x80000000
- beq 1001f
- bic \irqstat, \irqstat, #0x80000000
- mov \irqnr, \irqstat, lsr #16
- add \irqnr, \irqnr, #(PXA_IRQ(0))
-1001:
- .endm
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
index f80bbe2..d4eac3d 100644
--- a/arch/arm/mach-pxa/include/mach/palm27x.h
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -37,8 +37,8 @@
#define palm27x_lcd_init(power, mode) do {} while (0)
#endif
-#if defined(CONFIG_USB_GADGET_PXA27X) || \
- defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X) || \
+ defined(CONFIG_USB_PXA27X_MODULE)
extern void __init palm27x_udc_init(int vbus, int pullup,
int vbus_inverted);
#else
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index d1fce8b..c5afacd 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -9,15 +9,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-
-void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
deleted file mode 100644
index bfecfbf..0000000
--- a/arch/arm/mach-pxa/include/mach/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/vmalloc.h
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END (0xe8000000UL)
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 7b324ec..c337c7e 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -445,4 +445,5 @@
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = littleton_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1dd5302..6119c01 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -505,4 +505,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = lpd270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c48ce6d..4b7a528 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -556,4 +556,5 @@
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = lubbock_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c3..4e6774f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -760,4 +760,5 @@
.handle_irq = pxa27x_handle_irq,
.init_machine = magician_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 0567d39..ca14555 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -622,4 +622,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = mainstone_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index b938fc2..924a3b5 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -696,13 +696,13 @@
static void mioa701_poweroff(void)
{
mioa701_machine_exit();
- arm_machine_restart('s', NULL);
+ pxa_restart('s', NULL);
}
static void mioa701_restart(char c, const char *cmd)
{
mioa701_machine_exit();
- arm_machine_restart('s', cmd);
+ pxa_restart('s', cmd);
}
static struct gpio global_gpios[] = {
@@ -734,7 +734,6 @@
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
- arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
@@ -752,9 +751,11 @@
MACHINE_START(MIOA701, "MIO A701")
.atag_offset = 0x100,
+ .restart_mode = 's',
.map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.handle_irq = &pxa27x_handle_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
+ .restart = mioa701_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 4af5d51..169bf8f 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -98,5 +98,6 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_machine = mp900c_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 325c245..fbc10d7 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -164,8 +164,8 @@
/******************************************************************************
* USB Gadget
******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X) || \
- defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X) || \
+ defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info palm27x_udc_info = {
.gpio_vbus_inverted = 1,
};
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 3d4a281..1fa80f4f 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -347,5 +347,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmld_init
+ .init_machine = palmld_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 99d6bcf..5ba1431 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -208,5 +208,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmt5_init
+ .init_machine = palmt5_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ec7cae..29b51b4 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -338,7 +338,7 @@
/******************************************************************************
* UDC
******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
static struct gpio_vbus_mach_info palmtc_udc_info = {
.gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
.gpio_vbus_inverted = 1,
@@ -542,5 +542,6 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmtc_init
+ .init_machine = palmtc_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 9376da0..5ebf49acb 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -361,5 +361,6 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmte2_init
+ .init_machine = palmte2_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 94e9708..ec82491 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -452,6 +452,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = treo680_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -464,5 +465,6 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = centro_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4e3e459..6170d76 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -369,5 +369,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmtx_init
+ .init_machine = palmtx_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 68e18ba..b2dff9d 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -404,5 +404,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmz72_init
+ .init_machine = palmz72_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 0b825a3..fe90544 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -265,4 +265,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = pcm027_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 50c8331..b260ce8 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -417,12 +417,7 @@
static void poodle_poweroff(void)
{
- arm_machine_restart('h', NULL);
-}
-
-static void poodle_restart(char mode, const char *cmd)
-{
- arm_machine_restart('h', cmd);
+ pxa_restart('h', NULL);
}
static void __init poodle_init(void)
@@ -430,7 +425,6 @@
int ret = 0;
pm_power_off = poodle_poweroff;
- arm_pm_restart = poodle_restart;
PCFR |= PCFR_OPDE;
@@ -472,4 +466,5 @@
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index f0c05f4..4962b16 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1093,6 +1093,7 @@
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1104,6 +1105,7 @@
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1115,5 +1117,6 @@
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 01e9d64..c8497b0 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -81,14 +81,17 @@
OSMR3 = OSCR + 368640; /* ... in 100 ms */
}
-void arch_reset(char mode, const char *cmd)
+void pxa_restart(char mode, const char *cmd)
{
+ local_irq_disable();
+ local_fiq_disable();
+
clear_reset_status(RESET_STATUS_ALL);
switch (mode) {
case 's':
/* Jump into ROM at address 0 */
- cpu_reset(0);
+ soft_restart(0);
break;
case 'g':
do_gpio_reset();
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e0..8787070 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -602,4 +602,5 @@
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saar_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3e999e3..b6dbaca 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -111,5 +111,6 @@
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saarb_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 953a919..a7f81a3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -926,7 +926,7 @@
******************************************************************************/
static void spitz_poweroff(void)
{
- arm_machine_restart('g', NULL);
+ pxa_restart('g', NULL);
}
static void spitz_restart(char mode, const char *cmd)
@@ -943,7 +943,6 @@
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
- arm_pm_restart = spitz_restart;
PMCR = 0x00;
@@ -982,33 +981,39 @@
#ifdef CONFIG_MACH_SPITZ
MACHINE_START(SPITZ, "SHARP Spitz")
+ .restart_mode = 'g',
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_BORZOI
MACHINE_START(BORZOI, "SHARP Borzoi")
+ .restart_mode = 'g',
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_AKITA
MACHINE_START(AKITA, "SHARP Akita")
+ .restart_mode = 'g',
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48b..80d7f23 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1005,6 +1005,7 @@
.timer = &pxa_timer,
.init_machine = imote2_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1017,5 +1018,6 @@
.timer = &pxa_timer,
.init_machine = stargate2_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb9..4fa36a3 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -495,4 +495,5 @@
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = tavorevb_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd56916..8a22879 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -132,4 +132,5 @@
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = evb3_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index de68470..b503049 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -16,7 +16,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
-#include <linux/sched.h>
#include <asm/div64.h>
#include <asm/mach/irq.h>
@@ -32,18 +31,10 @@
* long as there is always less than 582 seconds between successive
* calls to sched_clock() which should always be the case in practice.
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace pxa_read_sched_clock(void)
{
- u32 cyc = OSCR;
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace pxa_update_sched_clock(void)
-{
- u32 cyc = OSCR;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return OSCR;
}
@@ -119,7 +110,7 @@
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
+ setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
ckevt_pxa_osmr0.max_delta_ns =
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 402b0c9..dfe40f8 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -905,7 +905,7 @@
static void tosa_poweroff(void)
{
- arm_machine_restart('g', NULL);
+ pxa_restart('g', NULL);
}
static void tosa_restart(char mode, const char *cmd)
@@ -935,7 +935,6 @@
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
- arm_pm_restart = tosa_restart;
PCFR |= PCFR_OPDE;
@@ -970,6 +969,7 @@
}
MACHINE_START(TOSA, "SHARP Tosa")
+ .restart_mode = 'g',
.fixup = fixup_tosa,
.map_io = pxa25x_map_io,
.nr_irqs = TOSA_NR_IRQS,
@@ -977,4 +977,5 @@
.handle_irq = pxa25x_handle_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
+ .restart = tosa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 1aaed2b..0f30af6 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -561,6 +561,7 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
@@ -571,4 +572,5 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae..afe2b74 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -998,4 +998,5 @@
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = viper_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index a7539a6..fed5fb0 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -343,7 +343,7 @@
/******************************************************************************
* USB Gadget
******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
.gpio_vbus = GPIO41_VPAC270_UDC_DETECT,
.gpio_pullup = -1,
@@ -721,5 +721,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = vpac270_init
+ .init_machine = vpac270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 70e1730..4bbe9a3 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -185,5 +185,6 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index ead32c9..d75f66a 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -725,4 +725,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = z2_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 498b83b..9db35a7 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -911,5 +911,6 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = zeus_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 6c39c33..7678b1b 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -430,4 +430,5 @@
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = zylonite_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dba6d0c..c593be4 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,8 @@
bool "Support Multicore Cortex-A9 Tile"
depends on MACH_REALVIEW_EB
select CPU_V7
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Enable support for the Cortex-A9MPCore tile fitted to the
Realview(R) Emulation Baseboard platform.
@@ -21,6 +23,8 @@
depends on MACH_REALVIEW_EB
select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Enable support for the ARM11MPCore tile fitted to the Realview(R)
Emulation Baseboard platform.
@@ -39,6 +43,8 @@
select CPU_V6K
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_BARRIERS if SMP
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
@@ -51,6 +57,7 @@
select CPU_V6
select ARM_GIC
select HAVE_TCM
+ select MIGHT_HAVE_CACHE_L2X0
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
ARM1176JZF-S.
@@ -78,6 +85,8 @@
bool "Support RealView(R) Platform Baseboard Explore"
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM
help
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index d5ed5d4..acd329a 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 47259c8..735b57a 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -65,6 +65,5 @@
extern void realview_init_early(void);
extern void realview_fixup(struct tag *tags, char **from,
struct meminfo *meminfo);
-extern void (*realview_reset)(char);
#endif
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
index 4071164..e8a5179 100644
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -7,8 +7,6 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index 6657ff23..471b671 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -21,12 +21,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-void (*realview_reset)(char mode);
-
static inline void arch_idle(void)
{
/*
@@ -36,15 +30,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * To reset, we hit the on-board reset register
- * in the system FPGA
- */
- if (realview_reset)
- realview_reset(mode);
- dsb();
-}
-
#endif
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
deleted file mode 100644
index a2a4c68..0000000
--- a/arch/arm/mach-realview/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/vmalloc.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xf8000000UL
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 026c66a..0069561 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
@@ -91,8 +91,8 @@
static struct map_desc realview_eb11mp_io_desc[] __initdata = {
{
- .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_CPU_BASE),
- .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_CPU_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
@@ -415,7 +415,7 @@
.init = realview_eb_timer_init,
};
-static void realview_eb_reset(char mode)
+static void realview_eb_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -427,6 +427,7 @@
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
if (core_tile_eb11mp())
__raw_writel(0x0008, reset_ctrl);
+ dsb();
}
static void __init realview_eb_init(void)
@@ -458,7 +459,6 @@
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_eb_reset;
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
@@ -469,8 +469,10 @@
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_eb_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_eb_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_eb_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index c057540..8fe3955 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
@@ -336,12 +336,13 @@
.init = realview_pb1176_timer_init,
};
-static void realview_pb1176_reset(char mode)
+static void realview_pb1176_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
+ dsb();
}
static void realview_pb1176_fixup(struct tag *tags, char **from,
@@ -381,7 +382,6 @@
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_pb1176_reset;
}
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
@@ -392,8 +392,10 @@
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pb1176_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pb1176_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_pb1176_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 671ad6d..34a2601 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
@@ -315,7 +315,7 @@
.init = realview_pb11mp_timer_init,
};
-static void realview_pb11mp_reset(char mode)
+static void realview_pb11mp_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -327,6 +327,7 @@
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x0000, reset_ctrl);
__raw_writel(0x0004, reset_ctrl);
+ dsb();
}
static void __init realview_pb11mp_init(void)
@@ -355,7 +356,6 @@
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_pb11mp_reset;
}
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
@@ -366,8 +366,10 @@
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pb11mp_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pb11mp_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_pb11mp_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index cbf22df..d26a6de 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
@@ -271,7 +271,7 @@
.init = realview_pba8_timer_init,
};
-static void realview_pba8_reset(char mode)
+static void realview_pba8_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -283,6 +283,7 @@
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x0000, reset_ctrl);
__raw_writel(0x0004, reset_ctrl);
+ dsb();
}
static void __init realview_pba8_init(void)
@@ -305,7 +306,6 @@
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_pba8_reset;
}
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
@@ -316,8 +316,10 @@
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pba8_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pba8_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_pba8_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 63c4114..a250fb4 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -20,7 +20,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
@@ -98,8 +98,8 @@
static struct map_desc realview_local_io_desc[] __initdata = {
{
- .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
- .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
@@ -339,7 +339,7 @@
#endif
}
-static void realview_pbx_reset(char mode)
+static void realview_pbx_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -351,6 +351,7 @@
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x00F0, reset_ctrl);
__raw_writel(0x00F4, reset_ctrl);
+ dsb();
}
static void __init realview_pbx_init(void)
@@ -388,7 +389,6 @@
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_pbx_reset;
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
@@ -399,8 +399,10 @@
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pbx_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pbx_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_pbx_restart,
MACHINE_END
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
index 45c7b93..359bab9 100644
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -7,21 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- iomd_writeb(0, IOMD_ROMCR0);
-
- /*
- * Jump into the ROM
- */
- cpu_reset(0);
-}
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
deleted file mode 100644
index fb70022..0000000
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-rpc/include/mach/vmalloc.h
- *
- * Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END 0xdc000000UL
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 8559598..3d44a59 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -24,6 +24,7 @@
#include <asm/elf.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
#include <asm/page.h>
#include <asm/domain.h>
#include <asm/setup.h>
@@ -214,6 +215,16 @@
arch_initcall(rpc_init);
+static void rpc_restart(char mode, const char *cmd)
+{
+ iomd_writeb(0, IOMD_ROMCR0);
+
+ /*
+ * Jump into the ROM
+ */
+ soft_restart(0);
+}
+
extern struct sys_timer ioc_timer;
MACHINE_START(RISCPC, "Acorn-RiscPC")
@@ -224,4 +235,5 @@
.map_io = rpc_map_io,
.init_irq = rpc_init_irq,
.timer = &ioc_timer,
+ .restart = rpc_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index bc53d2d..ac7b2ad 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -24,7 +24,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/common.h b/arch/arm/mach-s3c2410/common.h
new file mode 100644
index 0000000..f65dc80
--- /dev/null
+++ b/arch/arm/mach-s3c2410/common.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S3C2410 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
+#define __ARCH_ARM_MACH_S3C2410_COMMON_H
+
+void s3c2410_restart(char mode, const char *cmd);
+
+#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 75189df..7dc6c46 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -16,7 +16,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -115,24 +115,25 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+static int s3c2410_cpufreq_add(struct device *dev)
{
return s3c_cpufreq_register(&s3c2410_cpufreq_info);
}
-static struct sysdev_driver s3c2410_cpufreq_driver = {
- .add = s3c2410_cpufreq_add,
+static struct subsys_interface s3c2410_cpufreq_interface = {
+ .name = "s3c2410_cpufreq",
+ .subsys = &s3c2410_subsys,
+ .add_dev = s3c2410_cpufreq_add,
};
static int __init s3c2410_cpufreq_init(void)
{
- return sysdev_driver_register(&s3c2410_sysclass,
- &s3c2410_cpufreq_driver);
+ return subsys_interface_register(&s3c2410_cpufreq_interface);
}
arch_initcall(s3c2410_cpufreq_init);
-static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+static int s3c2410a_cpufreq_add(struct device *dev)
{
/* alter the maximum freq settings for S3C2410A. If a board knows
* it only has a maximum of 200, then it should register its own
@@ -143,17 +144,18 @@
s3c2410_cpufreq_info.max.pclk = 66500000;
s3c2410_cpufreq_info.name = "s3c2410a";
- return s3c2410_cpufreq_add(sysdev);
+ return s3c2410_cpufreq_add(dev);
}
-static struct sysdev_driver s3c2410a_cpufreq_driver = {
- .add = s3c2410a_cpufreq_add,
+static struct subsys_interface s3c2410a_cpufreq_interface = {
+ .name = "s3c2410a_cpufreq",
+ .subsys = &s3c2410a_subsys,
+ .add_dev = s3c2410a_cpufreq_add,
};
static int __init s3c2410a_cpufreq_init(void)
{
- return sysdev_driver_register(&s3c2410a_sysclass,
- &s3c2410a_cpufreq_driver);
+ return subsys_interface_register(&s3c2410a_cpufreq_interface);
}
arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbe43df..2afd000 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -14,7 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/serial_core.h>
#include <mach/map.h>
@@ -132,7 +132,7 @@
},
};
-static int __init s3c2410_dma_add(struct sys_device *sysdev)
+static int __init s3c2410_dma_add(struct device *dev)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2410_dma_order);
@@ -140,24 +140,28 @@
}
#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_dma_driver = {
- .add = s3c2410_dma_add,
+static struct subsys_interface s3c2410_dma_interface = {
+ .name = "s3c2410_dma",
+ .subsys = &s3c2410_subsys,
+ .add_dev = s3c2410_dma_add,
};
static int __init s3c2410_dma_drvinit(void)
{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
+ return subsys_interface_register(&s3c2410_interface);
}
arch_initcall(s3c2410_dma_drvinit);
-static struct sysdev_driver s3c2410a_dma_driver = {
- .add = s3c2410_dma_add,
+static struct subsys_interface s3c2410a_dma_interface = {
+ .name = "s3c2410a_dma",
+ .subsys = &s3c2410a_subsys,
+ .add_dev = s3c2410_dma_add,
};
static int __init s3c2410a_dma_drvinit(void)
{
- return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+ return subsys_interface_register(&s3c2410a_dma_interface);
}
arch_initcall(s3c2410a_dma_drvinit);
@@ -165,13 +169,15 @@
#if defined(CONFIG_CPU_S3C2442)
/* S3C2442 DMA contains the same selection table as the S3C2410 */
-static struct sysdev_driver s3c2442_dma_driver = {
- .add = s3c2410_dma_add,
+static struct subsys_interface s3c2442_dma_interface = {
+ .name = "s3c2442_dma",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2410_dma_add,
};
static int __init s3c2442_dma_drvinit(void)
{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
+ return subsys_interface_register(&s3c2442_dma_interface);
}
arch_initcall(s3c2442_dma_drvinit);
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index ae8e482..acbdfec 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
-#include <linux/sysdev.h>
+#include <linux/device.h>
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
@@ -202,7 +202,7 @@
struct s3c2410_dma_buf *end; /* end of queue */
/* system device */
- struct sys_device dev;
+ struct device dev;
};
typedef unsigned long dma_device_t;
diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
deleted file mode 100644
index f8c9387..0000000
--- a/arch/arm/mach-s3c2410/include/mach/reset.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/reset.h
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU reset controls
-*/
-
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H __FILE__
-
-/* This allows the over-ride of the default reset code
-*/
-
-extern void (*s3c24xx_reset_hook)(void);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
deleted file mode 100644
index 6faadce..0000000
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/hardware.h>
-#include <plat/watchdog-reset.h>
-
-extern void (*s3c24xx_reset_hook)(void);
-
-static void
-arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- cpu_reset(0);
- }
-
- if (s3c24xx_reset_hook)
- s3c24xx_reset_hook();
-
- arch_wdt_reset();
-
- /* we'll take a jump through zero as a poor second */
- cpu_reset(0);
-}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
index a8cbca6..5e215c1 100644
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -15,12 +15,10 @@
#include <mach/map.h>
#include <mach/idle.h>
-#include <mach/reset.h>
#include <mach/regs-clock.h>
void (*s3c24xx_idle)(void);
-void (*s3c24xx_reset_hook)(void);
void s3c24xx_default_idle(void)
{
@@ -54,5 +52,3 @@
else
s3c24xx_default_idle();
}
-
-#include <mach/system-reset.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
deleted file mode 100644
index 7a311e8..0000000
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 7983894..4220cc6 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -63,6 +63,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include "common.h"
+
static struct resource amlm5900_nor_resource = {
.start = 0x00000000,
.end = 0x01000000 - 1,
@@ -241,4 +243,5 @@
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index a20ae1a..c6133c6 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -66,6 +66,7 @@
#include "usb-simtec.h"
#include "nor-simtec.h"
+#include "common.h"
#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
@@ -662,4 +663,5 @@
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 05a7d16..41245a6 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -18,7 +18,7 @@
#include <linux/memblock.h>
#include <linux/timer.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -70,6 +70,8 @@
#include <sound/uda1380.h>
+#include "common.h"
+
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#define H1940_PA_LATCH S3C2410_CS2
@@ -751,4 +753,5 @@
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 1dc3e32..383d00c 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -51,6 +51,8 @@
#include <plat/s3c2410.h>
#include <plat/udc.h>
+#include "common.h"
+
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
};
@@ -591,6 +593,7 @@
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
+ .restart = s3c2410_restart,
MACHINE_END
MACHINE_START(N35, "Acer-N35")
@@ -601,4 +604,5 @@
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f03f3fd..5f1e0ee 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -38,6 +38,8 @@
#include <plat/iic.h>
#include <plat/cpu.h>
+#include "common.h"
+
static struct map_desc otom11_iodesc[] __initdata = {
/* Device area */
{ (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
@@ -121,4 +123,5 @@
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 4518521..91c16d9 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -28,7 +28,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/spi/spi.h>
@@ -62,6 +62,8 @@
#include <plat/cpu.h>
#include <plat/pm.h>
+#include "common.h"
+
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
};
@@ -350,6 +352,5 @@
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
-
-
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 99c9dfd..bdc27e7 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -54,6 +54,8 @@
#include <plat/common-smdk.h>
+#include "common.h"
+
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
};
@@ -116,6 +118,5 @@
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
-
-
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index e0d0b6f..1114666f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -54,6 +54,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include "common.h"
+
static struct resource tct_hammer_nor_resource = {
.start = 0x00000000,
.end = 0x01000000 - 1,
@@ -151,4 +153,5 @@
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index df47e8e..cc7032b 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -53,6 +53,7 @@
#include "usb-simtec.h"
#include "nor-simtec.h"
+#include "common.h"
/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -405,4 +406,5 @@
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index 8338865..c07438b 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -25,7 +25,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -66,30 +66,34 @@
{ .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
};
-static int s3c2410_plls_add(struct sys_device *dev)
+static int s3c2410_plls_add(struct device *dev)
{
return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
}
-static struct sysdev_driver s3c2410_plls_drv = {
- .add = s3c2410_plls_add,
+static struct subsys_interface s3c2410_plls_interface = {
+ .name = "s3c2410_plls",
+ .subsys = &s3c2410_subsys,
+ .add_dev = s3c2410_plls_add,
};
static int __init s3c2410_pll_init(void)
{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+ return subsys_interface_register(&s3c2410_plls_interface);
}
arch_initcall(s3c2410_pll_init);
-static struct sysdev_driver s3c2410a_plls_drv = {
- .add = s3c2410_plls_add,
+static struct subsys_interface s3c2410a_plls_interface = {
+ .name = "s3c2410a_plls",
+ .subsys = &s3c2410a_subsys,
+ .add_dev = s3c2410_plls_add,
};
static int __init s3c2410a_pll_init(void)
{
- return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+ return subsys_interface_register(&s3c2410a_plls_interface);
}
arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 4728f9a..fda5385 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -24,7 +24,7 @@
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <linux/io.h>
@@ -111,7 +111,7 @@
.resume = s3c2410_pm_resume,
};
-static int s3c2410_pm_add(struct sys_device *dev)
+static int s3c2410_pm_add(struct device *dev)
{
pm_cpu_prep = s3c2410_pm_prepare;
pm_cpu_sleep = s3c2410_cpu_suspend;
@@ -120,52 +120,60 @@
}
#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_pm_driver = {
- .add = s3c2410_pm_add,
+static struct subsys_interface s3c2410_pm_interface = {
+ .name = "s3c2410_pm",
+ .subsys = &s3c2410_subsys,
+ .add_dev = s3c2410_pm_add,
};
/* register ourselves */
static int __init s3c2410_pm_drvinit(void)
{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
+ return subsys_interface_register(&s3c2410_pm_interface);
}
arch_initcall(s3c2410_pm_drvinit);
-static struct sysdev_driver s3c2410a_pm_driver = {
- .add = s3c2410_pm_add,
+static struct subsys_interface s3c2410a_pm_interface = {
+ .name = "s3c2410a_pm",
+ .subsys = &s3c2410a_subsys,
+ .add_dev = s3c2410_pm_add,
};
static int __init s3c2410a_pm_drvinit(void)
{
- return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+ return subsys_interface_register(&s3c2410a_pm_interface);
}
arch_initcall(s3c2410a_pm_drvinit);
#endif
#if defined(CONFIG_CPU_S3C2440)
-static struct sysdev_driver s3c2440_pm_driver = {
- .add = s3c2410_pm_add,
+static struct subsys_interface s3c2440_pm_interface = {
+ .name = "s3c2440_pm",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2410_pm_add,
};
static int __init s3c2440_pm_drvinit(void)
{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
+ return subsys_interface_register(&s3c2440_pm_interface);
}
arch_initcall(s3c2440_pm_drvinit);
#endif
#if defined(CONFIG_CPU_S3C2442)
-static struct sysdev_driver s3c2442_pm_driver = {
- .add = s3c2410_pm_add,
+static struct subsys_interface s3c2442_pm_interface = {
+ .name = "s3c2442_pm",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2410_pm_add,
};
static int __init s3c2442_pm_drvinit(void)
{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
+ return subsys_interface_register(&s3c2442_pm_interface);
}
arch_initcall(s3c2442_pm_drvinit);
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 3d7ebc5..eea559e 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -42,6 +42,7 @@
#include <plat/clock.h>
#include <plat/pll.h>
#include <plat/pm.h>
+#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -131,22 +132,24 @@
s3c24xx_register_clock(&s3c2410_armclk);
}
-struct sysdev_class s3c2410_sysclass = {
+struct bus_type s3c2410_subsys = {
.name = "s3c2410-core",
+ .dev_name = "s3c2410-core",
};
/* Note, we would have liked to name this s3c2410-core, but we cannot
- * register two sysdev_class with the same name.
+ * register two subsystems with the same name.
*/
-struct sysdev_class s3c2410a_sysclass = {
+struct bus_type s3c2410a_subsys = {
.name = "s3c2410a-core",
+ .dev_name = "s3c2410a-core",
};
-static struct sys_device s3c2410_sysdev = {
- .cls = &s3c2410_sysclass,
+static struct device s3c2410_dev = {
+ .bus = &s3c2410_subsys,
};
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2410 based system)
* as a driver which may support both 2410 and 2440 may try and use it.
@@ -154,14 +157,14 @@
static int __init s3c2410_core_init(void)
{
- return sysdev_class_register(&s3c2410_sysclass);
+ return subsys_system_register(&s3c2410_subsys, NULL);
}
core_initcall(s3c2410_core_init);
static int __init s3c2410a_core_init(void)
{
- return sysdev_class_register(&s3c2410a_sysclass);
+ return subsys_system_register(&s3c2410a_subsys, NULL);
}
core_initcall(s3c2410a_core_init);
@@ -175,11 +178,23 @@
#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
- return sysdev_register(&s3c2410_sysdev);
+ return device_register(&s3c2410_dev);
}
int __init s3c2410a_init(void)
{
- s3c2410_sysdev.cls = &s3c2410a_sysclass;
+ s3c2410_dev.bus = &s3c2410a_subsys;
return s3c2410_init();
}
+
+void s3c2410_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ soft_restart(0);
+ }
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 140711d..5168816 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -26,7 +26,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index eb3ea17..d8664b7 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -16,7 +16,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -194,7 +194,7 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
};
-static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+static int s3c2412_cpufreq_add(struct device *dev)
{
unsigned long fclk_rate;
@@ -244,14 +244,15 @@
return -ENOENT;
}
-static struct sysdev_driver s3c2412_cpufreq_driver = {
- .add = s3c2412_cpufreq_add,
+static struct subsys_interface s3c2412_cpufreq_interface = {
+ .name = "s3c2412_cpufreq",
+ .subsys = &s3c2412_subsys,
+ .add_dev = s3c2412_cpufreq_add,
};
static int s3c2412_cpufreq_init(void)
{
- return sysdev_driver_register(&s3c2412_sysclass,
- &s3c2412_cpufreq_driver);
+ return subsys_interface_register(&s3c2412_cpufreq_interface);
}
arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index d2a7d5ef..142acd3 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -14,7 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/io.h>
@@ -159,19 +159,21 @@
.map_size = ARRAY_SIZE(s3c2412_dma_mappings),
};
-static int __init s3c2412_dma_add(struct sys_device *sysdev)
+static int __init s3c2412_dma_add(struct device *dev)
{
s3c2410_dma_init();
return s3c24xx_dma_init_map(&s3c2412_dma_sel);
}
-static struct sysdev_driver s3c2412_dma_driver = {
- .add = s3c2412_dma_add,
+static struct subsys_interface s3c2412_dma_interface = {
+ .name = "s3c2412_dma",
+ .subsys = &s3c2412_subsys,
+ .add_dev = s3c2412_dma_add,
};
static int __init s3c2412_dma_init(void)
{
- return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver);
+ return subsys_interface_register(&s3c2412_dma_interface);
}
arch_initcall(s3c2412_dma_init);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index 1a1aa22..a8a46c1 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -23,7 +23,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -170,7 +170,7 @@
static struct irq_chip s3c2412_irq_rtc_chip;
-static int s3c2412_irq_add(struct sys_device *sysdev)
+static int s3c2412_irq_add(struct device *dev)
{
unsigned int irqno;
@@ -200,13 +200,15 @@
return 0;
}
-static struct sysdev_driver s3c2412_irq_driver = {
- .add = s3c2412_irq_add,
+static struct subsys_interface s3c2412_irq_interface = {
+ .name = "s3c2412_irq",
+ .subsys = &s3c2412_subsys,
+ .add_dev = s3c2412_irq_add,
};
static int s3c2412_irq_init(void)
{
- return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
+ return subsys_interface_register(&s3c2412_irq_interface);
}
arch_initcall(s3c2412_irq_init);
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 286ef17..ae73ba3 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -48,6 +48,7 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <plat/s3c2412.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
@@ -661,4 +662,5 @@
.map_io = jive_map_io,
.init_machine = jive_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index f1eec1b..b11451b 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -134,6 +134,7 @@
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
MACHINE_START(SMDK2412, "SMDK2412")
@@ -145,6 +146,7 @@
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
MACHINE_START(SMDK2413, "SMDK2413")
@@ -156,4 +158,5 @@
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 1bbb1ef..94bfaa1 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -162,4 +162,5 @@
.init_machine = vstms_init,
.map_io = vstms_map_io,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index f4077ef..d1adfa6 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -16,7 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -56,7 +56,7 @@
{
}
-static int s3c2412_pm_add(struct sys_device *sysdev)
+static int s3c2412_pm_add(struct device *dev)
{
pm_cpu_prep = s3c2412_pm_prepare;
pm_cpu_sleep = s3c2412_cpu_suspend;
@@ -87,13 +87,15 @@
SAVE_ITEM(S3C2413_GPJSLPCON),
};
-static struct sysdev_driver s3c2412_pm_driver = {
- .add = s3c2412_pm_add,
+static struct subsys_interface s3c2412_pm_interface = {
+ .name = "s3c2412_pm",
+ .subsys = &s3c2412_subsys,
+ .add_dev = s3c2412_pm_add,
};
static __init int s3c2412_pm_init(void)
{
- return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+ return subsys_interface_register(&s3c2412_pm_interface);
}
arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 57a1e01..aff6e85 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -32,7 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/reset.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
@@ -131,8 +130,11 @@
cpu_do_idle();
}
-static void s3c2412_hard_reset(void)
+void s3c2412_restart(char mode, const char *cmd)
{
+ if (mode == 's')
+ soft_restart(0);
+
/* errata "Watch-dog/Software Reset Problem" specifies that
* this reset must be done with the SYSCLK sourced from
* EXTCLK instead of FOUT to avoid a glitch in the reset
@@ -164,10 +166,6 @@
s3c24xx_idle = s3c2412_idle;
- /* set custom reset hook */
-
- s3c24xx_reset_hook = s3c2412_hard_reset;
-
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
@@ -220,25 +218,26 @@
s3c2412_baseclk_add();
}
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2412 based system)
* as a driver which may support both 2410 and 2440 may try and use it.
*/
-struct sysdev_class s3c2412_sysclass = {
+struct bus_type s3c2412_subsys = {
.name = "s3c2412-core",
+ .dev_name = "s3c2412-core",
};
static int __init s3c2412_core_init(void)
{
- return sysdev_class_register(&s3c2412_sysclass);
+ return subsys_system_register(&s3c2412_subsys, NULL);
}
core_initcall(s3c2412_core_init);
-static struct sys_device s3c2412_sysdev = {
- .cls = &s3c2412_sysclass,
+static struct device s3c2412_dev = {
+ .bus = &s3c2412_subsys,
};
int __init s3c2412_init(void)
@@ -250,5 +249,5 @@
#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
- return sysdev_register(&s3c2412_sysdev);
+ return device_register(&s3c2412_dev);
}
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 28ad20d..36df761 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -25,7 +25,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -213,7 +213,7 @@
return 0;
}
-static int __init s3c2416_irq_add(struct sys_device *sysdev)
+static int __init s3c2416_irq_add(struct device *dev)
{
printk(KERN_INFO "S3C2416: IRQ Support\n");
@@ -234,13 +234,15 @@
return 0;
}
-static struct sysdev_driver s3c2416_irq_driver = {
- .add = s3c2416_irq_add,
+static struct subsys_interface s3c2416_irq_interface = {
+ .name = "s3c2416_irq",
+ .subsys = &s3c2416_subsys,
+ .add_dev = s3c2416_irq_add,
};
static int __init s3c2416_irq_init(void)
{
- return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver);
+ return subsys_interface_register(&s3c2416_irq_interface);
}
arch_initcall(s3c2416_irq_init);
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index a9eee53..66b7173 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -251,4 +251,5 @@
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2416_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 9ec54f1..3bdb15a 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/io.h>
@@ -48,7 +48,7 @@
__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
}
-static int s3c2416_pm_add(struct sys_device *sysdev)
+static int s3c2416_pm_add(struct device *dev)
{
pm_cpu_prep = s3c2416_pm_prepare;
pm_cpu_sleep = s3c2416_cpu_suspend;
@@ -56,13 +56,15 @@
return 0;
}
-static struct sysdev_driver s3c2416_pm_driver = {
- .add = s3c2416_pm_add,
+static struct subsys_interface s3c2416_pm_interface = {
+ .name = "s3c2416_pm",
+ .subsys = &s3c2416_subsys,
+ .add_dev = s3c2416_pm_add,
};
static __init int s3c2416_pm_init(void)
{
- return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
+ return subsys_interface_register(&s3c2416_pm_interface);
}
arch_initcall(s3c2416_pm_init);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index ee214bc..5287d28 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -31,7 +31,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/reset.h>
#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
@@ -68,16 +67,20 @@
IODESC_ENT(TIMER),
};
-struct sysdev_class s3c2416_sysclass = {
+struct bus_type s3c2416_subsys = {
.name = "s3c2416-core",
+ .dev_name = "s3c2416-core",
};
-static struct sys_device s3c2416_sysdev = {
- .cls = &s3c2416_sysclass,
+static struct device s3c2416_dev = {
+ .bus = &s3c2416_subsys,
};
-static void s3c2416_hard_reset(void)
+void s3c2416_restart(char mode, const char *cmd)
{
+ if (mode == 's')
+ soft_restart(0);
+
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
@@ -85,7 +88,6 @@
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
- s3c24xx_reset_hook = s3c2416_hard_reset;
/* s3c24xx_idle = s3c2416_idle; */
/* change WDT IRQ number */
@@ -105,7 +107,7 @@
#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
- return sysdev_register(&s3c2416_sysdev);
+ return device_register(&s3c2416_dev);
}
void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -133,7 +135,7 @@
iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
}
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2416 based system)
* as a driver which may support both 2443 and 2440 may try and use it.
@@ -141,7 +143,7 @@
static int __init s3c2416_core_init(void)
{
- return sysdev_class_register(&s3c2416_sysclass);
+ return subsys_system_register(&s3c2416_subsys, NULL);
}
core_initcall(s3c2416_core_init);
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index f9e6bda..d895759 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -28,7 +28,6 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
@@ -108,7 +107,7 @@
.ctrlbit = S3C2440_CLKCON_CAMERA,
};
-static int s3c2440_clk_add(struct sys_device *sysdev)
+static int s3c2440_clk_add(struct device *dev)
{
struct clk *clock_upll;
struct clk *clock_h;
@@ -137,13 +136,15 @@
return 0;
}
-static struct sysdev_driver s3c2440_clk_driver = {
- .add = s3c2440_clk_add,
+static struct subsys_interface s3c2440_clk_interface = {
+ .name = "s3c2440_clk",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_clk_add,
};
-static __init int s3c24xx_clk_driver(void)
+static __init int s3c24xx_clk_init(void)
{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+ return subsys_interface_register(&s3c2440_clk_interface);
}
-arch_initcall(s3c24xx_clk_driver);
+arch_initcall(s3c24xx_clk_init);
diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
new file mode 100644
index 0000000..db8a98a
--- /dev/null
+++ b/arch/arm/mach-s3c2440/common.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S3C2440 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
+#define __ARCH_ARM_MACH_S3C2440_COMMON_H
+
+void s3c2440_restart(char mode, const char *cmd);
+
+#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 0e73f8f..15b1ddf 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -14,7 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/serial_core.h>
#include <mach/map.h>
@@ -174,20 +174,22 @@
},
};
-static int __init s3c2440_dma_add(struct sys_device *sysdev)
+static int __init s3c2440_dma_add(struct device *dev)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2440_dma_order);
return s3c24xx_dma_init_map(&s3c2440_dma_sel);
}
-static struct sysdev_driver s3c2440_dma_driver = {
- .add = s3c2440_dma_add,
+static struct subsys_interface s3c2440_dma_interface = {
+ .name = "s3c2440_dma",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_dma_add,
};
static int __init s3c2440_dma_init(void)
{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver);
+ return subsys_interface_register(&s3c2440_dma_interface);
}
arch_initcall(s3c2440_dma_init);
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index eb1cc0f..4fee9bc 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -23,7 +23,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -92,7 +92,7 @@
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct sys_device *sysdev)
+static int s3c2440_irq_add(struct device *dev)
{
unsigned int irqno;
@@ -113,13 +113,15 @@
return 0;
}
-static struct sysdev_driver s3c2440_irq_driver = {
- .add = s3c2440_irq_add,
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_irq_add,
};
static int s3c2440_irq_init(void)
{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+ return subsys_interface_register(&s3c2440_irq_interface);
}
arch_initcall(s3c2440_irq_init);
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 74f92fc..121ff8d 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -55,6 +55,8 @@
#include <plat/cpu.h>
#include <plat/audio-simtec.h>
+#include "common.h"
+
#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
static struct map_desc anubis_iodesc[] __initdata = {
@@ -503,4 +505,5 @@
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 38887ee..b7e334f 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -49,6 +49,8 @@
#include <plat/cpu.h>
#include <plat/mci.h>
+#include "common.h"
+
static struct map_desc at2440evb_iodesc[] __initdata = {
/* Nothing here */
};
@@ -238,4 +240,5 @@
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index de1e0ff..5859e60 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -90,6 +90,7 @@
#include <plat/iic.h>
#include <plat/ts.h>
+#include "common.h"
static struct pcf50633 *gta02_pcf;
@@ -600,4 +601,5 @@
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 91fe0b4..437322f 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -60,6 +60,8 @@
#include <sound/s3c24xx_uda134x.h>
+#include "common.h"
+
#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
static struct map_desc mini2440_iodesc[] __initdata = {
@@ -681,4 +683,5 @@
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 61c0bf1..40eaf84 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -47,6 +47,8 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include "common.h"
+
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
};
@@ -156,4 +158,5 @@
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index dc142eb..e795715 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -54,6 +54,8 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include "common.h"
+
/* onboard perihperal map */
static struct map_desc osiris_iodesc[] __initdata = {
@@ -452,4 +454,5 @@
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 0d3453b..332d753 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -24,7 +24,7 @@
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/pwm.h>
@@ -62,6 +62,8 @@
#include <sound/uda1380.h>
+#include "common.h"
+
#define LCD_PWM_PERIOD 192960
#define LCD_PWM_DUTY 127353
@@ -832,4 +834,5 @@
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index e19499c..80a0972 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -20,7 +20,7 @@
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/console.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
@@ -51,6 +51,8 @@
#include <plat/cpu.h>
#include <plat/pm.h>
+#include "common.h"
+
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
@@ -224,4 +226,5 @@
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 36eeb41..1deb60d 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -47,6 +47,8 @@
#include <plat/common-smdk.h>
+#include "common.h"
+
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -181,4 +183,5 @@
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
index 976002f..cf75966 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
@@ -17,7 +17,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -270,7 +270,7 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+static int s3c2440_cpufreq_add(struct device *dev)
{
xtal = s3c_cpufreq_clk_get(NULL, "xtal");
hclk = s3c_cpufreq_clk_get(NULL, "hclk");
@@ -285,27 +285,29 @@
return s3c_cpufreq_register(&s3c2440_cpufreq_info);
}
-static struct sysdev_driver s3c2440_cpufreq_driver = {
- .add = s3c2440_cpufreq_add,
+static struct subsys_interface s3c2440_cpufreq_interface = {
+ .name = "s3c2440_cpufreq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_cpufreq_add,
};
static int s3c2440_cpufreq_init(void)
{
- return sysdev_driver_register(&s3c2440_sysclass,
- &s3c2440_cpufreq_driver);
+ return subsys_interface_register(&s3c2440_cpufreq_interface);
}
/* arch_initcall adds the clocks we need, so use subsys_initcall. */
subsys_initcall(s3c2440_cpufreq_init);
-static struct sysdev_driver s3c2442_cpufreq_driver = {
- .add = s3c2440_cpufreq_add,
+static struct subsys_interface s3c2442_cpufreq_interface = {
+ .name = "s3c2442_cpufreq",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2440_cpufreq_add,
};
static int s3c2442_cpufreq_init(void)
{
- return sysdev_driver_register(&s3c2442_sysclass,
- &s3c2442_cpufreq_driver);
+ return subsys_interface_register(&s3c2442_cpufreq_interface);
}
subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
index f105d5e..b5368ae 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -14,7 +14,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -51,7 +51,7 @@
{ .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
};
-static int s3c2440_plls12_add(struct sys_device *dev)
+static int s3c2440_plls12_add(struct device *dev)
{
struct clk *xtal_clk;
unsigned long xtal;
@@ -72,25 +72,29 @@
return 0;
}
-static struct sysdev_driver s3c2440_plls12_drv = {
- .add = s3c2440_plls12_add,
+static struct subsys_interface s3c2440_plls12_interface = {
+ .name = "s3c2440_plls12",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_plls12_add,
};
static int __init s3c2440_pll_12mhz(void)
{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+ return subsys_interface_register(&s3c2440_plls12_interface);
}
arch_initcall(s3c2440_pll_12mhz);
-static struct sysdev_driver s3c2442_plls12_drv = {
- .add = s3c2440_plls12_add,
+static struct subsys_interface s3c2442_plls12_interface = {
+ .name = "s3c2442_plls12",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2440_plls12_add,
};
static int __init s3c2442_pll_12mhz(void)
{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+ return subsys_interface_register(&s3c2442_plls12_interface);
}
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
index c8a8f90..42f2b5c 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -14,7 +14,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -79,7 +79,7 @@
{ .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
};
-static int s3c2440_plls169344_add(struct sys_device *dev)
+static int s3c2440_plls169344_add(struct device *dev)
{
struct clk *xtal_clk;
unsigned long xtal;
@@ -100,28 +100,28 @@
return 0;
}
-static struct sysdev_driver s3c2440_plls169344_drv = {
- .add = s3c2440_plls169344_add,
+static struct subsys_interface s3c2440_plls169344_interface = {
+ .name = "s3c2440_plls169344",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_plls169344_add,
};
static int __init s3c2440_pll_16934400(void)
{
- return sysdev_driver_register(&s3c2440_sysclass,
- &s3c2440_plls169344_drv);
-
+ return subsys_interface_register(&s3c2440_plls169344_interface);
}
arch_initcall(s3c2440_pll_16934400);
-static struct sysdev_driver s3c2442_plls169344_drv = {
- .add = s3c2440_plls169344_add,
+static struct subsys_interface s3c2442_plls169344_interface = {
+ .name = "s3c2442_plls169344",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2440_plls169344_add,
};
static int __init s3c2442_pll_16934400(void)
{
- return sysdev_driver_register(&s3c2442_sysclass,
- &s3c2442_plls169344_drv);
-
+ return subsys_interface_register(&s3c2442_plls169344_interface);
}
arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 37f8cc6..517623a 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <linux/clk.h>
@@ -35,13 +35,14 @@
#include <plat/cpu.h>
#include <plat/s3c244x.h>
#include <plat/pm.h>
+#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-static struct sys_device s3c2440_sysdev = {
- .cls = &s3c2440_sysclass,
+static struct device s3c2440_dev = {
+ .bus = &s3c2440_subsys,
};
int __init s3c2440_init(void)
@@ -63,7 +64,7 @@
/* register our system device for everything else */
- return sysdev_register(&s3c2440_sysdev);
+ return device_register(&s3c2440_dev);
}
void __init s3c2440_map_io(void)
@@ -73,3 +74,15 @@
s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
+
+void s3c2440_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ soft_restart(0);
+ }
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 2c822e0..8004e04 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -28,7 +28,6 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
@@ -123,7 +122,7 @@
},
};
-static int s3c2442_clk_add(struct sys_device *sysdev)
+static int s3c2442_clk_add(struct device *dev)
{
struct clk *clock_upll;
struct clk *clock_h;
@@ -149,20 +148,22 @@
return 0;
}
-static struct sysdev_driver s3c2442_clk_driver = {
- .add = s3c2442_clk_add,
+static struct subsys_interface s3c2442_clk_interface = {
+ .name = "s3c2442_clk",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2442_clk_add,
};
static __init int s3c2442_clk_init(void)
{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+ return subsys_interface_register(&s3c2442_clk_interface);
}
arch_initcall(s3c2442_clk_init);
-static struct sys_device s3c2442_sysdev = {
- .cls = &s3c2442_sysclass,
+static struct device s3c2442_dev = {
+ .bus = &s3c2442_subsys,
};
int __init s3c2442_init(void)
@@ -175,7 +176,7 @@
register_syscore_ops(&s3c244x_pm_syscore_ops);
register_syscore_ops(&s3c24xx_irq_syscore_ops);
- return sysdev_register(&s3c2442_sysdev);
+ return device_register(&s3c2442_dev);
}
void __init s3c2442_map_io(void)
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
index 7f5ea0a..b3fdbdd 100644
--- a/arch/arm/mach-s3c2440/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -28,7 +28,6 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
@@ -73,7 +72,7 @@
},
};
-static int s3c244x_clk_add(struct sys_device *sysdev)
+static int s3c244x_clk_add(struct device *dev)
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
@@ -115,24 +114,28 @@
return 0;
}
-static struct sysdev_driver s3c2440_clk_driver = {
- .add = s3c244x_clk_add,
+static struct subsys_interface s3c2440_clk_interface = {
+ .name = "s3c2440_clk",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c244x_clk_add,
};
static int s3c2440_clk_init(void)
{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+ return subsys_interface_register(&s3c2440_clk_interface);
}
arch_initcall(s3c2440_clk_init);
-static struct sysdev_driver s3c2442_clk_driver = {
- .add = s3c244x_clk_add,
+static struct subsys_interface s3c2442_clk_interface = {
+ .name = "s3c2442_clk",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c244x_clk_add,
};
static int s3c2442_clk_init(void)
{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+ return subsys_interface_register(&s3c2442_clk_interface);
}
arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index c63e8f2..74d3dcf 100644
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
@@ -23,7 +23,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -91,7 +91,7 @@
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct sys_device *sysdev)
+static int s3c244x_irq_add(struct device *dev)
{
unsigned int irqno;
@@ -114,25 +114,29 @@
return 0;
}
-static struct sysdev_driver s3c2440_irq_driver = {
- .add = s3c244x_irq_add,
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c244x_irq_add,
};
static int s3c2440_irq_init(void)
{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+ return subsys_interface_register(&s3c2440_irq_interface);
}
arch_initcall(s3c2440_irq_init);
-static struct sysdev_driver s3c2442_irq_driver = {
- .add = s3c244x_irq_add,
+static struct subsys_interface s3c2442_irq_interface = {
+ .name = "s3c2442_irq",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c244x_irq_add,
};
static int s3c2442_irq_init(void)
{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
+ return subsys_interface_register(&s3c2442_irq_interface);
}
arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 7e8a23d..36bc60f 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -135,17 +135,19 @@
s3c2410_baseclk_add();
}
-/* Since the S3C2442 and S3C2440 share items, put both sysclasses here */
+/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
-struct sysdev_class s3c2440_sysclass = {
+struct bus_type s3c2440_subsys = {
.name = "s3c2440-core",
+ .dev_name = "s3c2440-core",
};
-struct sysdev_class s3c2442_sysclass = {
+struct bus_type s3c2442_subsys = {
.name = "s3c2442-core",
+ .dev_name = "s3c2442-core",
};
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2440 based system)
* as a driver which may support both 2410 and 2440 may try and use it.
@@ -153,14 +155,14 @@
static int __init s3c2440_core_init(void)
{
- return sysdev_class_register(&s3c2440_sysclass);
+ return subsys_system_register(&s3c2440_subsys, NULL);
}
core_initcall(s3c2440_core_init);
static int __init s3c2442_core_init(void)
{
- return sysdev_class_register(&s3c2442_sysclass);
+ return subsys_system_register(&s3c2442_subsys, NULL);
}
core_initcall(s3c2442_core_init);
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 1c2c088..6dde269 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -27,7 +27,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/serial_core.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index fe52151..de6b4a2 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -14,7 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/io.h>
@@ -135,19 +135,21 @@
.map_size = ARRAY_SIZE(s3c2443_dma_mappings),
};
-static int __init s3c2443_dma_add(struct sys_device *sysdev)
+static int __init s3c2443_dma_add(struct device *dev)
{
s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
return s3c24xx_dma_init_map(&s3c2443_dma_sel);
}
-static struct sysdev_driver s3c2443_dma_driver = {
- .add = s3c2443_dma_add,
+static struct subsys_interface s3c2443_dma_interface = {
+ .name = "s3c2443_dma",
+ .subsys = &s3c2443_subsys,
+ .add_dev = s3c2443_dma_add,
};
static int __init s3c2443_dma_init(void)
{
- return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver);
+ return subsys_interface_register(&s3c2443_dma_interface);
}
arch_initcall(s3c2443_dma_init);
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 83ecb11..35e4ff2 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -23,7 +23,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -241,7 +241,7 @@
return 0;
}
-static int __init s3c2443_irq_add(struct sys_device *sysdev)
+static int __init s3c2443_irq_add(struct device *dev)
{
printk("S3C2443: IRQ Support\n");
@@ -265,13 +265,15 @@
return 0;
}
-static struct sysdev_driver s3c2443_irq_driver = {
- .add = s3c2443_irq_add,
+static struct subsys_interface s3c2443_irq_interface = {
+ .name = "s3c2443_irq",
+ .subsys = &s3c2443_subsys,
+ .add_dev = s3c2443_irq_add,
};
static int __init s3c2443_irq_init(void)
{
- return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver);
+ return subsys_interface_register(&s3c2443_irq_interface);
}
arch_initcall(s3c2443_irq_init);
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index bec107e..2092369 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -145,4 +145,5 @@
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2443_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index a22b771..b9deaeb 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -19,7 +19,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -31,7 +31,6 @@
#include <asm/irq.h>
#include <mach/regs-s3c2443-clock.h>
-#include <mach/reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -49,16 +48,20 @@
IODESC_ENT(TIMER),
};
-struct sysdev_class s3c2443_sysclass = {
+struct bus_type s3c2443_subsys = {
.name = "s3c2443-core",
+ .dev_name = "s3c2443-core",
};
-static struct sys_device s3c2443_sysdev = {
- .cls = &s3c2443_sysclass,
+static struct device s3c2443_dev = {
+ .bus = &s3c2443_subsys,
};
-static void s3c2443_hard_reset(void)
+void s3c2443_restart(char mode, const char *cmd)
{
+ if (mode == 's')
+ soft_restart(0);
+
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
@@ -66,8 +69,6 @@
{
printk("S3C2443: Initialising architecture\n");
- s3c24xx_reset_hook = s3c2443_hard_reset;
-
s3c_nand_setname("s3c2412-nand");
s3c_fb_setname("s3c2443-fb");
@@ -77,7 +78,7 @@
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
- return sysdev_register(&s3c2443_sysdev);
+ return device_register(&s3c2443_dev);
}
void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -99,7 +100,7 @@
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2443 based system)
* as a driver which may support both 2443 and 2440 may try and use it.
@@ -107,7 +108,7 @@
static int __init s3c2443_core_init(void)
{
- return sysdev_class_register(&s3c2443_sysclass);
+ return subsys_system_register(&s3c2443_subsys, NULL);
}
core_initcall(s3c2443_core_init);
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 5552e04..381586c 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -8,6 +8,7 @@
bool
depends on ARCH_S3C64XX
select SAMSUNG_WAKEMASK
+ select PM_GENERIC_DOMAINS
default y
help
Base platform code for any Samsung S3C64XX device
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index cfc0b99..f37016ce 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -10,54 +10,49 @@
obj-n :=
obj- :=
-# Core files
-obj-y += cpu.o
-obj-y += clock.o
+# Core
-# Core support for S3C6400 system
+obj-y += common.o clock.o
+
+# Core support
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
-obj-y += irq.o
-obj-y += irq-eint.o
+# PM
+
+obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o
# DMA support
obj-$(CONFIG_S3C64XX_DMA) += dma.o
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-
-# PM
-
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_PM) += irq-pm.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
-
-# device support
+# Device support
obj-y += dev-uart.o
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 39c238d..625219b 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -705,7 +705,7 @@
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-void __init_or_cpufreq s3c6400_setup_clocks(void)
+void __init_or_cpufreq s3c64xx_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long xtal;
@@ -804,7 +804,7 @@
* as ARMCLK as well as the necessary parent clocks.
*
* This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * s3c64xx_setup_clocks() call which may be needed by the cpufreq
* or resume code to re-set the clocks if the bootloader has changed
* them.
*/
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
new file mode 100644
index 0000000..4a7394d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -0,0 +1,385 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Common Codes for S3C64XX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irq-uart.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+/* uart registration process */
+
+void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6400_map_io,
+ .init_clocks = s3c6400_init_clocks,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6400_init,
+ .name = name_s3c6400,
+ }, {
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6410_map_io,
+ .init_clocks = s3c6410_init_clocks,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6410_init,
+ .name = name_s3c6410,
+ },
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_MEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S3C_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_GPIO,
+ .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_MODEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+ .length = SZ_1K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct bus_type s3c64xx_subsys = {
+ .name = "s3c64xx-core",
+ .dev_name = "s3c64xx-core",
+};
+
+static struct device s3c64xx_dev = {
+ .bus = &s3c64xx_subsys,
+};
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+ iotable_init(mach_desc, size);
+ init_consistent_dma_size(SZ_8M);
+
+ /* detect cpu id */
+ s3c64xx_init_cpu();
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+static __init int s3c64xx_dev_init(void)
+{
+ subsys_system_register(&s3c64xx_subsys, NULL);
+ return device_register(&s3c64xx_dev);
+}
+core_initcall(s3c64xx_dev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+ vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+
+ /* add the timer sub-irqs */
+ s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}
+
+#define eint_offset(irq) ((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
+
+static inline void s3c_irq_eint_mask(struct irq_data *data)
+{
+ u32 mask;
+
+ mask = __raw_readl(S3C64XX_EINT0MASK);
+ mask |= (u32)data->chip_data;
+ __raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(struct irq_data *data)
+{
+ u32 mask;
+
+ mask = __raw_readl(S3C64XX_EINT0MASK);
+ mask &= ~((u32)data->chip_data);
+ __raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(struct irq_data *data)
+{
+ __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(struct irq_data *data)
+{
+ /* compiler should in-line these */
+ s3c_irq_eint_mask(data);
+ s3c_irq_eint_ack(data);
+}
+
+static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = eint_offset(data->irq);
+ int pin, pin_val;
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+ void __iomem *reg;
+
+ if (offs > 27)
+ return -EINVAL;
+
+ if (offs <= 15)
+ reg = S3C64XX_EINT0CON0;
+ else
+ reg = S3C64XX_EINT0CON1;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -1;
+ }
+
+ if (offs <= 15)
+ shift = (offs / 2) * 4;
+ else
+ shift = ((offs - 16) / 2) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(reg);
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, reg);
+
+ /* set the GPIO pin appropriately */
+
+ if (offs < 16) {
+ pin = S3C64XX_GPN(offs);
+ pin_val = S3C_GPIO_SFN(2);
+ } else if (offs < 23) {
+ pin = S3C64XX_GPL(offs + 8 - 16);
+ pin_val = S3C_GPIO_SFN(3);
+ } else {
+ pin = S3C64XX_GPM(offs - 23);
+ pin_val = S3C_GPIO_SFN(3);
+ }
+
+ s3c_gpio_cfgpin(pin, pin_val);
+
+ return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+ .name = "s3c-eint",
+ .irq_mask = s3c_irq_eint_mask,
+ .irq_unmask = s3c_irq_eint_unmask,
+ .irq_mask_ack = s3c_irq_eint_maskack,
+ .irq_ack = s3c_irq_eint_ack,
+ .irq_set_type = s3c_irq_eint_set_type,
+ .irq_set_wake = s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S3C64XX_EINT0PEND);
+ u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+ unsigned int irq;
+
+ status &= ~mask;
+ status >>= start;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+
+ status >>= 1;
+ }
+}
+
+static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(20, 27);
+}
+
+static int __init s3c64xx_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+ irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
+ irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+ irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+ irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+ irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+ return 0;
+}
+arch_initcall(s3c64xx_init_irq_eint);
+
+void s3c64xx_restart(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ /* if all else fails, or mode was for soft, jump to 0 */
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
new file mode 100644
index 0000000..5eb9c9a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Common Header for S3C64XX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
+
+void s3c64xx_init_irq(u32 vic0, u32 vic1);
+void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+
+void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+void s3c64xx_setup_clocks(void);
+
+void s3c64xx_restart(char mode, const char *cmd);
+
+extern struct syscore_ops s3c64xx_irq_syscore_ops;
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
deleted file mode 100644
index de085b7..0000000
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpu.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S3C6400_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6400_map_io,
- .init_clocks = s3c6400_init_clocks,
- .init_uarts = s3c6400_init_uarts,
- .init = s3c6400_init,
- .name = name_s3c6400,
- }, {
- .idcode = S3C6410_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6410_map_io,
- .init_clocks = s3c6410_init_clocks,
- .init_uarts = s3c6410_init_uarts,
- .init = s3c6410_init,
- .name = name_s3c6410,
- },
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_MEM,
- .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S3C_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C64XX_VA_GPIO,
- .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C64XX_VA_MODEM,
- .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
- .length = SZ_1K,
- .type = MT_DEVICE,
- },
-};
-
-
-struct sysdev_class s3c64xx_sysclass = {
- .name = "s3c64xx-core",
-};
-
-static struct sys_device s3c64xx_sysdev = {
- .cls = &s3c64xx_sysclass,
-};
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialise the io descriptors we need for initialisation */
- iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
- iotable_init(mach_desc, size);
- init_consistent_dma_size(SZ_8M);
-
- /* detect cpu id */
- s3c64xx_init_cpu();
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static __init int s3c64xx_sysdev_init(void)
-{
- sysdev_class_register(&s3c64xx_sysclass);
- return sysdev_register(&s3c64xx_sysdev);
-}
-
-core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 5e6b420..3341fd1 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 17d62f4..f2a7a17 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -16,7 +16,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/dmapool.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -35,7 +35,7 @@
/* dma channel state information */
struct s3c64xx_dmac {
- struct sys_device sysdev;
+ struct device dev;
struct clk *clk;
void __iomem *regs;
struct s3c2410_dma_chan *channels;
@@ -631,8 +631,9 @@
return IRQ_HANDLED;
}
-static struct sysdev_class dma_sysclass = {
+static struct bus_type dma_subsys = {
.name = "s3c64xx-dma",
+ .dev_name = "s3c64xx-dma",
};
static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
@@ -651,12 +652,12 @@
return -ENOMEM;
}
- dmac->sysdev.id = chno / 8;
- dmac->sysdev.cls = &dma_sysclass;
+ dmac->dev.id = chno / 8;
+ dmac->dev.bus = &dma_subsys;
- err = sysdev_register(&dmac->sysdev);
+ err = device_register(&dmac->dev);
if (err) {
- printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+ printk(KERN_ERR "%s: failed to register device\n", __func__);
goto err_alloc;
}
@@ -667,7 +668,7 @@
goto err_dev;
}
- snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+ snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id);
dmac->clk = clk_get(NULL, clkname);
if (IS_ERR(dmac->clk)) {
@@ -715,7 +716,7 @@
err_map:
iounmap(regs);
err_dev:
- sysdev_unregister(&dmac->sysdev);
+ device_unregister(&dmac->dev);
err_alloc:
kfree(dmac);
return err;
@@ -733,9 +734,9 @@
return -ENOMEM;
}
- ret = sysdev_class_register(&dma_sysclass);
+ ret = subsys_system_register(&dma_subsys, NULL);
if (ret) {
- printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+ printk(KERN_ERR "%s: failed to create subsys\n", __func__);
return -ENOMEM;
}
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
index dd36260..dc2bc15 100644
--- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -12,7 +12,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/map.h>
-#include <mach/irqs.h>
+ .macro disable_fiq
+ .endm
-#include <asm/entry-macro-vic2.S>
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
index 2e58cb7..353ed43 100644
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ b/arch/arm/mach-s3c64xx/include/mach/system.h
@@ -11,20 +11,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/watchdog-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
}
-static void arch_reset(char mode, const char *cmd)
-{
- if (mode != 's')
- arch_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- cpu_reset(0);
-}
-
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
deleted file mode 100644
index 23f75e5..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
deleted file mode 100644
index 4d203be..0000000
--- a/arch/arm/mach-s3c64xx/irq-eint.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq-eint.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <plat/regs-irqtype.h>
-#include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#define eint_offset(irq) ((irq) - IRQ_EINT(0))
-#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
-
-static inline void s3c_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S3C64XX_EINT0MASK);
- mask |= (u32)data->chip_data;
- __raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static void s3c_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S3C64XX_EINT0MASK);
- mask &= ~((u32)data->chip_data);
- __raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static inline void s3c_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
-}
-
-static void s3c_irq_eint_maskack(struct irq_data *data)
-{
- /* compiler should in-line these */
- s3c_irq_eint_mask(data);
- s3c_irq_eint_ack(data);
-}
-
-static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = eint_offset(data->irq);
- int pin, pin_val;
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
- void __iomem *reg;
-
- if (offs > 27)
- return -EINVAL;
-
- if (offs <= 15)
- reg = S3C64XX_EINT0CON0;
- else
- reg = S3C64XX_EINT0CON1;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -1;
- }
-
- if (offs <= 15)
- shift = (offs / 2) * 4;
- else
- shift = ((offs - 16) / 2) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(reg);
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, reg);
-
- /* set the GPIO pin appropriately */
-
- if (offs < 16) {
- pin = S3C64XX_GPN(offs);
- pin_val = S3C_GPIO_SFN(2);
- } else if (offs < 23) {
- pin = S3C64XX_GPL(offs + 8 - 16);
- pin_val = S3C_GPIO_SFN(3);
- } else {
- pin = S3C64XX_GPM(offs - 23);
- pin_val = S3C_GPIO_SFN(3);
- }
-
- s3c_gpio_cfgpin(pin, pin_val);
-
- return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
- .name = "s3c-eint",
- .irq_mask = s3c_irq_eint_mask,
- .irq_unmask = s3c_irq_eint_unmask,
- .irq_mask_ack = s3c_irq_eint_maskack,
- .irq_ack = s3c_irq_eint_ack,
- .irq_set_type = s3c_irq_eint_set_type,
- .irq_set_wake = s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S3C64XX_EINT0PEND);
- u32 mask = __raw_readl(S3C64XX_EINT0MASK);
- unsigned int irq;
-
- status &= ~mask;
- status >>= start;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
-
- status >>= 1;
- }
-}
-
-static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_eint(0, 3);
-}
-
-static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_eint(4, 11);
-}
-
-static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_eint(12, 19);
-}
-
-static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_eint(20, 27);
-}
-
-static int __init s3c64xx_init_irq_eint(void)
-{
- int irq;
-
- for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
- irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
- irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
- set_irq_flags(irq, IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
- irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
- irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
- irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
-
- return 0;
-}
-
-arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
deleted file mode 100644
index b07357e..0000000
--- a/arch/arm/mach-s3c64xx/irq.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* setup the sources the vic should advertise resume for, even though it
- * is not doing the wake (set_irq_wake needs to be valid) */
-#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
-#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
- 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
- vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
- /* add the timer sub-irqs */
- s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 8eba88e..b86f277 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -30,6 +30,7 @@
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -45,13 +46,14 @@
#include <plat/fb.h>
#include <plat/regs-fb-v4.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
+#include "common.h"
+
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
@@ -236,7 +238,9 @@
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 6666856..f208154 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index d04b654..fb786b6 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -37,6 +37,7 @@
#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -50,7 +51,6 @@
#include <mach/regs-gpio-memport.h>
-#include <plat/s3c6410.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
@@ -66,6 +66,8 @@
#include <plat/iic.h>
#include <plat/pm.h>
+#include "common.h"
+
/* serial port setup */
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -704,14 +706,16 @@
regulator_has_full_constraints();
- s3c_pm_init();
+ s3c64xx_pm_init();
}
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 952f75f..521e07b 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -29,6 +29,7 @@
#include <mach/hardware.h>
#include <mach/map.h>
+#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -37,12 +38,13 @@
#include <plat/fb.h>
#include <plat/nand.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -267,7 +269,9 @@
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 1bc85c3..c34c2ab 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -24,6 +24,7 @@
#include <linux/serial_core.h>
#include <linux/types.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -33,7 +34,6 @@
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -45,6 +45,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -345,7 +347,9 @@
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index cb13cba..0efa2ba 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -25,6 +25,7 @@
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -39,12 +40,13 @@
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -99,7 +101,9 @@
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 87281e4..be2a9a2 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -25,6 +25,7 @@
#include <linux/serial_core.h>
#include <linux/types.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -34,7 +35,6 @@
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -46,6 +46,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -326,7 +328,9 @@
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index cb1ebeb..ce31db1 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -40,6 +40,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 94c831d..3f42431 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -17,19 +17,20 @@
#include <linux/leds.h>
#include <linux/platform_device.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
#include "mach-smartq.h"
static struct gpio_led smartq5_leds[] = {
@@ -148,7 +149,9 @@
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index f112547..e5c09b6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -17,19 +17,20 @@
#include <linux/leds.h>
#include <linux/platform_device.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
#include "mach-smartq.h"
static struct gpio_led smartq7_leds[] = {
@@ -164,7 +165,9 @@
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 73450c2..5f09653 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -22,6 +22,7 @@
#include <asm/mach-types.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -31,12 +32,13 @@
#include <plat/regs-serial.h>
-#include <plat/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -88,7 +90,9 @@
.atag_offset = 0x100,
.init_irq = s3c6400_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 8bc8edd..ca6fc20 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -43,6 +43,7 @@
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -63,7 +64,6 @@
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -73,6 +73,8 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -700,7 +702,9 @@
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index b375cd5..7d3e81b 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -17,10 +17,12 @@
#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/pm_domain.h>
#include <mach/map.h>
#include <mach/irqs.h>
+#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
@@ -31,6 +33,148 @@
#include <mach/regs-gpio-memport.h>
#include <mach/regs-modem.h>
+struct s3c64xx_pm_domain {
+ char *const name;
+ u32 ena;
+ u32 pwr_stat;
+ struct generic_pm_domain pd;
+};
+
+static int s3c64xx_pd_off(struct generic_pm_domain *domain)
+{
+ struct s3c64xx_pm_domain *pd;
+ u32 val;
+
+ pd = container_of(domain, struct s3c64xx_pm_domain, pd);
+
+ val = __raw_readl(S3C64XX_NORMAL_CFG);
+ val &= ~(pd->ena);
+ __raw_writel(val, S3C64XX_NORMAL_CFG);
+
+ return 0;
+}
+
+static int s3c64xx_pd_on(struct generic_pm_domain *domain)
+{
+ struct s3c64xx_pm_domain *pd;
+ u32 val;
+ long retry = 1000000L;
+
+ pd = container_of(domain, struct s3c64xx_pm_domain, pd);
+
+ val = __raw_readl(S3C64XX_NORMAL_CFG);
+ val |= pd->ena;
+ __raw_writel(val, S3C64XX_NORMAL_CFG);
+
+ /* Not all domains provide power status readback */
+ if (pd->pwr_stat) {
+ do {
+ cpu_relax();
+ if (__raw_readl(S3C64XX_BLK_PWR_STAT) & pd->pwr_stat)
+ break;
+ } while (retry--);
+
+ if (!retry) {
+ pr_err("Failed to start domain %s\n", pd->name);
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+static struct s3c64xx_pm_domain s3c64xx_pm_irom = {
+ .name = "IROM",
+ .ena = S3C64XX_NORMALCFG_IROM_ON,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_etm = {
+ .name = "ETM",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_ETM_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_ETM,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_s = {
+ .name = "S",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_S_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_S,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_f = {
+ .name = "F",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_F_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_F,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_p = {
+ .name = "P",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_P_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_P,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_i = {
+ .name = "I",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_I_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_I,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_g = {
+ .name = "G",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_G_ON,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_v = {
+ .name = "V",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_V_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_V,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain *s3c64xx_always_on_pm_domains[] = {
+ &s3c64xx_pm_irom,
+};
+
+static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
+ &s3c64xx_pm_etm,
+ &s3c64xx_pm_g,
+ &s3c64xx_pm_v,
+ &s3c64xx_pm_i,
+ &s3c64xx_pm_p,
+ &s3c64xx_pm_s,
+ &s3c64xx_pm_f,
+};
+
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
@@ -89,6 +233,8 @@
SAVE_ITEM(S3C64XX_SDMA_SEL),
SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
+
+ SAVE_ITEM(S3C64XX_NORMAL_CFG),
};
void s3c_pm_configure_extint(void)
@@ -179,7 +325,26 @@
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
}
-static int s3c64xx_pm_init(void)
+int __init s3c64xx_pm_init(void)
+{
+ int i;
+
+ s3c_pm_init();
+
+ for (i = 0; i < ARRAY_SIZE(s3c64xx_always_on_pm_domains); i++)
+ pm_genpd_init(&s3c64xx_always_on_pm_domains[i]->pd,
+ &pm_domain_always_on_gov, false);
+
+ for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
+ pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
+
+ if (dev_get_platdata(&s3c_device_fb.dev))
+ pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+
+ return 0;
+}
+
+static __init int s3c64xx_pm_initcall(void)
{
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
@@ -198,5 +363,12 @@
return 0;
}
+arch_initcall(s3c64xx_pm_initcall);
-arch_initcall(s3c64xx_pm_init);
+static __init int s3c64xx_pm_late_initcall(void)
+{
+ pm_genpd_poweroff_unused();
+
+ return 0;
+}
+late_initcall(s3c64xx_pm_late_initcall);
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 7a3bc32..4869714 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -38,7 +38,8 @@
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
+
+#include "common.h"
void __init s3c6400_map_io(void)
{
@@ -60,7 +61,7 @@
void __init s3c6400_init_clocks(int xtal)
{
s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
- s3c6400_setup_clocks();
+ s3c64xx_setup_clocks();
}
void __init s3c6400_init_irq(void)
@@ -70,17 +71,18 @@
s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
}
-struct sysdev_class s3c6400_sysclass = {
- .name = "s3c6400-core",
+static struct bus_type s3c6400_subsys = {
+ .name = "s3c6400-core",
+ .dev_name = "s3c6400-core",
};
-static struct sys_device s3c6400_sysdev = {
- .cls = &s3c6400_sysclass,
+static struct device s3c6400_dev = {
+ .bus = &s3c6400_subsys,
};
static int __init s3c6400_core_init(void)
{
- return sysdev_class_register(&s3c6400_sysclass);
+ return subsys_system_register(&s3c6400_subsys, NULL);
}
core_initcall(s3c6400_core_init);
@@ -89,5 +91,5 @@
{
printk("S3C6400: Initialising architecture\n");
- return sysdev_register(&s3c6400_sysdev);
+ return device_register(&s3c6400_dev);
}
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 4117003..31c29fd 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -41,8 +41,8 @@
#include <plat/adc-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+
+#include "common.h"
void __init s3c6410_map_io(void)
{
@@ -66,7 +66,7 @@
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
- s3c6400_setup_clocks();
+ s3c64xx_setup_clocks();
}
void __init s3c6410_init_irq(void)
@@ -75,17 +75,18 @@
s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
}
-struct sysdev_class s3c6410_sysclass = {
- .name = "s3c6410-core",
+struct bus_type s3c6410_subsys = {
+ .name = "s3c6410-core",
+ .dev_name = "s3c6410-core",
};
-static struct sys_device s3c6410_sysdev = {
- .cls = &s3c6410_sysclass,
+static struct device s3c6410_dev = {
+ .bus = &s3c6410_subsys,
};
static int __init s3c6410_core_init(void)
{
- return sysdev_class_register(&s3c6410_sysclass);
+ return subsys_system_register(&s3c6410_subsys, NULL);
}
core_initcall(s3c6410_core_init);
@@ -94,5 +95,5 @@
{
printk("S3C6410: Initialising architecture\n");
- return sysdev_register(&s3c6410_sysdev);
+ return device_register(&s3c6410_dev);
}
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 83d2afb..2cf8002 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -20,7 +20,7 @@
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-extern void s3c64xx_fb_gpio_setup_24bpp(void)
+void s3c64xx_fb_gpio_setup_24bpp(void)
{
s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index a1324d8..d3f7409 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -10,14 +10,16 @@
obj-n :=
obj- :=
-# Core support for S5P64X0 system
+# Core
-obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o
-obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o
+obj-y += common.o clock.o
obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
+
obj-$(CONFIG_PM) += pm.o irq-pm.o
+obj-y += dma.o
+
# machine support
obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
@@ -28,5 +30,6 @@
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-y += setup-i2c0.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index c54c65d..eb4ffe3 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -17,7 +17,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -31,7 +31,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5p6440.h>
+
+#include "common.h"
static u32 epll_div[][5] = {
{ 36000000, 0, 48, 1, 4 },
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index 2d04abf..bb7ee91 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -17,7 +17,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -31,7 +31,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5p6450.h>
+
+#include "common.h"
static struct clksrc_clk clk_mout_dpll = {
.clk = {
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
index b52c6e2..241d0e6 100644
--- a/arch/arm/mach-s5p64x0/clock.c
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -17,7 +17,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -30,8 +30,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
+
+#include "common.h"
struct clksrc_clk clk_mout_apll = {
.clk = {
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
new file mode 100644
index 0000000..28d0b91
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -0,0 +1,469 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Codes for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6450[] = "S5P6450";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5P6440_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
+ .map_io = s5p6440_map_io,
+ .init_clocks = s5p6440_init_clocks,
+ .init_uarts = s5p6440_init_uarts,
+ .init = s5p64x0_init,
+ .name = name_s5p6440,
+ }, {
+ .idcode = S5P6450_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
+ .map_io = s5p6450_map_io,
+ .init_clocks = s5p6450_init_clocks,
+ .init_uarts = s5p6450_init_uarts,
+ .init = s5p64x0_init,
+ .name = name_s5p6450,
+ },
+};
+
+/* Initial IO mappings */
+
+static struct map_desc s5p64x0_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5P64X0_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5P64X0_PA_WDT),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5P64X0_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO,
+ .pfn = __phys_to_pfn(S5P64X0_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S5P64X0_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S5P64X0_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc s5p6440_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S5P6440_PA_UART(0)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc s5p6450_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S5P6450_PA_UART(0)),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART + SZ_512K,
+ .pfn = __phys_to_pfn(S5P6450_PA_UART(5)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void s5p64x0_idle(void)
+{
+ unsigned long val;
+
+ if (!need_resched()) {
+ val = __raw_readl(S5P64X0_PWR_CFG);
+ val &= ~(0x3 << 5);
+ val |= (0x1 << 5);
+ __raw_writel(val, S5P64X0_PWR_CFG);
+
+ cpu_do_idle();
+ }
+ local_irq_enable();
+}
+
+/*
+ * s5p64x0_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P64X0_SYS_ID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5p6440_map_io(void)
+{
+ /* initialize any device information early */
+ s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
+
+ iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+ init_consistent_dma_size(SZ_8M);
+}
+
+void __init s5p6450_map_io(void)
+{
+ /* initialize any device information early */
+ s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
+
+ iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+ init_consistent_dma_size(SZ_8M);
+}
+
+/*
+ * s5p64x0_init_clocks
+ *
+ * register and setup the CPU clocks
+ */
+
+void __init s5p6440_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6440_register_clocks();
+ s5p6440_setup_clocks();
+}
+
+void __init s5p6450_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6450_register_clocks();
+ s5p6450_setup_clocks();
+}
+
+/*
+ * s5p64x0_init_irq
+ *
+ * register the CPU interrupts
+ */
+
+void __init s5p6440_init_irq(void)
+{
+ /* S5P6440 supports 2 VIC */
+ u32 vic[2];
+
+ /*
+ * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+ * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+ */
+ vic[0] = 0xff800ae7;
+ vic[1] = 0xffbf23e5;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+void __init s5p6450_init_irq(void)
+{
+ /* S5P6450 supports only 2 VIC */
+ u32 vic[2];
+
+ /*
+ * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
+ * VIC1 is missing IRQ VIC1[12, 14, 23]
+ */
+ vic[0] = 0xff9f1fff;
+ vic[1] = 0xff7fafff;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct bus_type s5p64x0_subsys = {
+ .name = "s5p64x0-core",
+ .dev_name = "s5p64x0-core",
+};
+
+static struct device s5p64x0_dev = {
+ .bus = &s5p64x0_subsys,
+};
+
+static int __init s5p64x0_core_init(void)
+{
+ return subsys_system_register(&s5p64x0_subsys, NULL);
+}
+core_initcall(s5p64x0_core_init);
+
+int __init s5p64x0_init(void)
+{
+ printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5p64x0_idle;
+
+ return device_register(&s5p64x0_dev);
+}
+
+static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
+ [0] = {
+ .name = "pclk_low",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+ [1] = {
+ .name = "uclk1",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+
+void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->clocks = s5p64x0_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
+ }
+ }
+}
+
+void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ int uart;
+
+ for (uart = 0; uart < no; uart++) {
+ s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
+ s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
+ }
+
+ s5p64x0_common_init_uarts(cfg, no);
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s5p64x0_common_init_uarts(cfg, no);
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+#define eint_offset(irq) ((irq) - IRQ_EINT(0))
+
+static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = eint_offset(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ if (offs > 15)
+ return -EINVAL;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs / 2) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P64X0_EINT0CON0);
+
+ /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
+
+ return 0;
+}
+
+/*
+ * s5p64x0_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
+ * the specific handlers s5p64x0_irq_demux_eintX_Y.
+ */
+static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S5P64X0_EINT0PEND);
+ u32 mask = __raw_readl(S5P64X0_EINT0MASK);
+ unsigned int irq;
+
+ status &= ~mask;
+ status >>= start;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+ status >>= 1;
+ }
+}
+
+static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(0, 3);
+}
+
+static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(4, 11);
+}
+
+static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
+ struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(12, 15);
+}
+
+static int s5p64x0_alloc_gc(void)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
+ S5P_VA_GPIO, handle_level_irq);
+ if (!gc) {
+ printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
+ "external interrupts failed\n", __func__);
+ return -EINVAL;
+ }
+
+ ct = gc->chip_types;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+ ct->chip.irq_set_wake = s3c_irqext_wake;
+ ct->regs.ack = EINT0PEND_OFFSET;
+ ct->regs.mask = EINT0MASK_OFFSET;
+ irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+ return 0;
+}
+
+static int __init s5p64x0_init_irq_eint(void)
+{
+ int ret = s5p64x0_alloc_gc();
+ irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
+ irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
+ irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
+
+ return ret;
+}
+arch_initcall(s5p64x0_init_irq_eint);
+
+void s5p64x0_restart(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
new file mode 100644
index 0000000..f8a60fd
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/common.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H
+#define __ARCH_ARM_MACH_S5P64X0_COMMON_H
+
+void s5p6440_init_irq(void);
+void s5p6450_init_irq(void);
+void s5p64x0_init_io(struct map_desc *mach_desc, int size);
+
+void s5p6440_register_clocks(void);
+void s5p6440_setup_clocks(void);
+
+void s5p6450_register_clocks(void);
+void s5p6450_setup_clocks(void);
+
+void s5p64x0_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern int s5p64x0_init(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern int s5p64x0_init(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
deleted file mode 100644
index ecab40c..0000000
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/cpu.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/adc-core.h>
-#include <plat/fb-core.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s5p64x0_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5P64X0_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5P64X0_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5P64X0_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc s5p6440_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S5P6440_PA_UART(0)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc s5p6450_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S5P6450_PA_UART(0)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART + SZ_512K,
- .pfn = __phys_to_pfn(S5P6450_PA_UART(5)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void s5p64x0_idle(void)
-{
- unsigned long val;
-
- if (!need_resched()) {
- val = __raw_readl(S5P64X0_PWR_CFG);
- val &= ~(0x3 << 5);
- val |= (0x1 << 5);
- __raw_writel(val, S5P64X0_PWR_CFG);
-
- cpu_do_idle();
- }
- local_irq_enable();
-}
-
-/*
- * s5p64x0_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5p6440_map_io(void)
-{
- /* initialize any device information early */
- s3c_adc_setname("s3c64xx-adc");
- s3c_fb_setname("s5p64x0-fb");
-
- iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
- iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
- init_consistent_dma_size(SZ_8M);
-}
-
-void __init s5p6450_map_io(void)
-{
- /* initialize any device information early */
- s3c_adc_setname("s3c64xx-adc");
- s3c_fb_setname("s5p64x0-fb");
-
- iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
- iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
- init_consistent_dma_size(SZ_8M);
-}
-
-/*
- * s5p64x0_init_clocks
- *
- * register and setup the CPU clocks
- */
-
-void __init s5p6440_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6440_register_clocks();
- s5p6440_setup_clocks();
-}
-
-void __init s5p6450_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6450_register_clocks();
- s5p6450_setup_clocks();
-}
-
-/*
- * s5p64x0_init_irq
- *
- * register the CPU interrupts
- */
-
-void __init s5p6440_init_irq(void)
-{
- /* S5P6440 supports 2 VIC */
- u32 vic[2];
-
- /*
- * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
- * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
- */
- vic[0] = 0xff800ae7;
- vic[1] = 0xffbf23e5;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-void __init s5p6450_init_irq(void)
-{
- /* S5P6450 supports only 2 VIC */
- u32 vic[2];
-
- /*
- * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
- * VIC1 is missing IRQ VIC1[12, 14, 23]
- */
- vic[0] = 0xff9f1fff;
- vic[1] = 0xff7fafff;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p64x0_sysclass = {
- .name = "s5p64x0-core",
-};
-
-static struct sys_device s5p64x0_sysdev = {
- .cls = &s5p64x0_sysclass,
-};
-
-static int __init s5p64x0_core_init(void)
-{
- return sysdev_class_register(&s5p64x0_sysclass);
-}
-core_initcall(s5p64x0_core_init);
-
-int __init s5p64x0_init(void)
-{
- printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5p64x0_idle;
-
- return sysdev_register(&s5p64x0_sysdev);
-}
diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
index 10b62b4..fbb246d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
@@ -10,7 +10,8 @@
* published by the Free Software Foundation.
*/
-#include <mach/map.h>
-#include <plat/irqs.h>
+ .macro disable_fiq
+ .endm
-#include <asm/entry-macro-vic2.S>
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
index 60f5753..cf26e09 100644
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ b/arch/arm/mach-s5p64x0/include/mach/system.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/system-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
diff --git a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
deleted file mode 100644
index 38dcc71..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c
deleted file mode 100644
index 79833ca..0000000
--- a/arch/arm/mach-s5p64x0/init.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/init.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Init support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
- [0] = {
- .name = "pclk_low",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "uclk1",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-
-void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->clocks = s5p64x0_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
- }
- }
-}
-
-void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- int uart;
-
- for (uart = 0; uart < no; uart++) {
- s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
- s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
- }
-
- s5p64x0_common_init_uarts(cfg, no);
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s5p64x0_common_init_uarts(cfg, no);
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
deleted file mode 100644
index 275dc74..0000000
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* arch/arm/mach-s5p64x0/irq-eint.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
- * http://www.samsung.com/
- *
- * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c
- *
- * S5P64X0 - Interrupt handling for External Interrupts.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#define eint_offset(irq) ((irq) - IRQ_EINT(0))
-
-static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = eint_offset(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- if (offs > 15)
- return -EINVAL;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs / 2) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P64X0_EINT0CON0);
-
- /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
- if (soc_is_s5p6450())
- s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-/*
- * s5p64x0_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
- * the specific handlers s5p64x0_irq_demux_eintX_Y.
- */
-static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S5P64X0_EINT0PEND);
- u32 mask = __raw_readl(S5P64X0_EINT0MASK);
- unsigned int irq;
-
- status &= ~mask;
- status >>= start;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
- status >>= 1;
- }
-}
-
-static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(0, 3);
-}
-
-static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(4, 11);
-}
-
-static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
- struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(12, 15);
-}
-
-static int s5p64x0_alloc_gc(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
- S5P_VA_GPIO, handle_level_irq);
- if (!gc) {
- printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
- "external interrupts failed\n", __func__);
- return -EINVAL;
- }
-
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
- ct->chip.irq_set_wake = s3c_irqext_wake;
- ct->regs.ack = EINT0PEND_OFFSET;
- ct->regs.mask = EINT0MASK_OFFSET;
- irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
- return 0;
-}
-
-static int __init s5p64x0_init_irq_eint(void)
-{
- int ret = s5p64x0_alloc_gc();
- irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
- irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
- irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
-
- return ret;
-}
-arch_initcall(s5p64x0_init_irq_eint);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 4a1250c..34d98a1 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -27,6 +27,7 @@
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/irq.h>
@@ -40,7 +41,6 @@
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
-#include <plat/s5p6440.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -53,6 +53,8 @@
#include <plat/fb.h>
#include <plat/regs-fb.h>
+#include "common.h"
+
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
@@ -201,7 +203,7 @@
static void __init smdk6440_map_io(void)
{
- s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+ s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -242,7 +244,9 @@
.atag_offset = 0x100,
.init_irq = s5p6440_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
.timer = &s5p_timer,
+ .restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 0ab129e..135cf5d 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -27,6 +27,7 @@
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/irq.h>
@@ -40,7 +41,6 @@
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
-#include <plat/s5p6450.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -53,6 +53,8 @@
#include <plat/fb.h>
#include <plat/regs-fb.h>
+#include "common.h"
+
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
@@ -221,7 +223,7 @@
static void __init smdk6450_map_io(void)
{
- s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+ s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(19200000);
s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -262,7 +264,9 @@
.atag_offset = 0x100,
.init_irq = s5p6450_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
.timer = &s5p_timer,
+ .restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 6992724..23f9b22 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -160,7 +160,7 @@
}
-static int s5p64x0_pm_add(struct sys_device *sysdev)
+static int s5p64x0_pm_add(struct device *dev)
{
pm_cpu_prep = s5p64x0_pm_prepare;
pm_cpu_sleep = s5p64x0_cpu_suspend;
@@ -169,15 +169,17 @@
return 0;
}
-static struct sysdev_driver s5p64x0_pm_driver = {
- .add = s5p64x0_pm_add,
+static struct subsys_interface s5p64x0_pm_interface = {
+ .name = "s5p64x0_pm",
+ .subsys = &s5p64x0_subsys,
+ .add_dev = s5p64x0_pm_add,
};
static __init int s5p64x0_pm_drvinit(void)
{
s3c_pm_init();
- return sysdev_driver_register(&s5p64x0_sysclass, &s5p64x0_pm_driver);
+ return subsys_interface_register(&s5p64x0_pm_interface);
}
arch_initcall(s5p64x0_pm_drvinit);
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index a5e6e60..c3166c4 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -9,28 +9,25 @@
obj-n :=
obj- :=
-# Core support for S5PC100 system
+# Core
-obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o
-obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
-obj-$(CONFIG_CPU_S5PC100) += dma.o
+obj-y += common.o clock.o
-# Helper and device support
-
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-
-# device support
-obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-y += dma.o
# machine support
obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
# device support
+
obj-y += dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+
+obj-y += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 8d47709..c4c7489 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -27,7 +27,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5pc100.h>
+
+#include "common.h"
static struct clk s5p_clk_otgphy = {
.name = "otg_phy",
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/common.c
similarity index 61%
rename from arch/arm/mach-s5pc100/cpu.c
rename to arch/arm/mach-s5pc100/common.c
index fd2708e..c909573 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -1,17 +1,16 @@
-/* linux/arch/arm/mach-s5pc100/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * Based on mach-s3c6410/cpu.c
+ * Common Codes for S5PC100
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
#include <linux/kernel.h>
#include <linux/types.h>
@@ -21,40 +20,78 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
+#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/ata-core.h>
-#include <plat/iic-core.h>
#include <plat/sdhci.h>
#include <plat/adc-core.h>
-#include <plat/onenand-core.h>
+#include <plat/ata-core.h>
#include <plat/fb-core.h>
+#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
-#include <plat/s5pc100.h>
+#include "common.h"
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5PC100_CPU_ID,
+ .idmask = S5PC100_CPU_MASK,
+ .map_io = s5pc100_map_io,
+ .init_clocks = s5pc100_init_clocks,
+ .init_uarts = s5pc100_init_uarts,
+ .init = s5pc100_init,
+ .name = name_s5pc100,
+ },
+};
/* Initial IO mappings */
static struct map_desc s5pc100_iodesc[] __initdata = {
{
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PC100_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5PC100_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PC100_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PC100_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
.length = SZ_16K,
@@ -100,15 +137,27 @@
local_irq_enable();
}
-/* s5pc100_map_io
+/*
+ * s5pc100_map_io
*
- * register the standard cpu IO areas
-*/
+ * register the standard CPU IO areas
+ */
+
+void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
void __init s5pc100_map_io(void)
{
- iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
-
/* initialise device information early */
s5pc100_default_sdhci0();
s5pc100_default_sdhci1();
@@ -143,19 +192,19 @@
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
-static struct sysdev_class s5pc100_sysclass = {
- .name = "s5pc100-core",
+static struct bus_type s5pc100_subsys = {
+ .name = "s5pc100-core",
+ .dev_name = "s5pc100-core",
};
-static struct sys_device s5pc100_sysdev = {
- .cls = &s5pc100_sysclass,
+static struct device s5pc100_dev = {
+ .bus = &s5pc100_subsys,
};
static int __init s5pc100_core_init(void)
{
- return sysdev_class_register(&s5pc100_sysclass);
+ return subsys_system_register(&s5pc100_subsys, NULL);
}
-
core_initcall(s5pc100_core_init);
int __init s5pc100_init(void)
@@ -165,5 +214,20 @@
/* set idle function */
pm_idle = s5pc100_idle;
- return sysdev_register(&s5pc100_sysdev);
+ return device_register(&s5pc100_dev);
+}
+
+/* uart registration process */
+
+void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void s5pc100_restart(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ soft_restart(0);
}
diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h
new file mode 100644
index 0000000..9fbd3ae
--- /dev/null
+++ b/arch/arm/mach-s5pc100/common.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5PC100 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
+#define __ARCH_ARM_MACH_S5PC100_COMMON_H
+
+void s5pc100_init_io(struct map_desc *mach_desc, int size);
+void s5pc100_init_irq(void);
+
+void s5pc100_register_clocks(void);
+void s5pc100_setup_clocks(void);
+
+void s5pc100_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index ba76af0..b8c242e 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -12,39 +12,14 @@
* warranty of any kind, whether express or implied.
*/
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, # S5P_IRQ_OFFSET + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- @ otherwise try vic2
- addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index a9ea57c..afc96c2 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,8 +11,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/system-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
deleted file mode 100644
index 44c8e57..0000000
--- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/init.c b/arch/arm/mach-s5pc100/init.c
deleted file mode 100644
index 19d7b52..0000000
--- a/arch/arm/mach-s5pc100/init.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* uart registration process */
-void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 26f5c91..674d229 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -25,6 +25,7 @@
#include <linux/input.h>
#include <linux/pwm_backlight.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -42,7 +43,6 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/s5pc100.h>
#include <plat/fb.h>
#include <plat/iic.h>
#include <plat/ata.h>
@@ -53,6 +53,8 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -215,7 +217,7 @@
static void __init smdkc100_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pc100_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
}
@@ -250,7 +252,9 @@
/* Maintainer: Byungho Min <bhmin@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pc100_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s5pc100_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 009fbe5..4c59186 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -10,18 +10,20 @@
obj-n :=
obj- :=
-# Core support for S5PV210 system
+# Core
-obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
-obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
+obj-y += common.o clock.o
+
obj-$(CONFIG_PM) += pm.o
+obj-y += dma.o
+
# machine support
obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o
-obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
-obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
obj-$(CONFIG_MACH_GONI) += mach-goni.o
+obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
+obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o
# device support
@@ -29,11 +31,12 @@
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-y += setup-i2c0.o
obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o
-obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 4c5ac7a..04c9b57 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -17,7 +17,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <mach/map.h>
@@ -29,7 +29,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5pv210.h>
+
+#include "common.h"
static unsigned long xtal;
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/common.c
similarity index 63%
rename from arch/arm/mach-s5pv210/cpu.c
rename to arch/arm/mach-s5pv210/common.c
index 84ec746..0ec3933 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -1,12 +1,13 @@
-/* linux/arch/arm/mach-s5pv210/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
+ * Common Codes for S5PV210
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
#include <linux/kernel.h>
#include <linux/types.h>
@@ -17,37 +18,78 @@
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include <linux/serial_core.h>
+#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/proc-fns.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
-#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/fb-core.h>
-#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
#include <plat/adc-core.h>
#include <plat/ata-core.h>
+#include <plat/fb-core.h>
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
-#include <plat/sdhci.h>
-#include <plat/reset.h>
#include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+static const char name_s5pv210[] = "S5PV210/S5PC110";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5PV210_CPU_ID,
+ .idmask = S5PV210_CPU_MASK,
+ .map_io = s5pv210_map_io,
+ .init_clocks = s5pv210_init_clocks,
+ .init_uarts = s5pv210_init_uarts,
+ .init = s5pv210_init,
+ .name = name_s5pv210,
+ },
+};
/* Initial IO mappings */
static struct map_desc s5pv210_iodesc[] __initdata = {
{
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PV210_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5PV210_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PV210_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5PV210_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PV210_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER),
.length = SZ_4K,
@@ -108,19 +150,32 @@
local_irq_enable();
}
-static void s5pv210_sw_reset(void)
+void s5pv210_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
}
-/* s5pv210_map_io
+/*
+ * s5pv210_map_io
*
* register the standard cpu IO areas
-*/
+ */
+
+void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
void __init s5pv210_map_io(void)
{
- iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
init_consistent_dma_size(14 << 20);
/* initialise device information early */
@@ -174,19 +229,19 @@
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
-struct sysdev_class s5pv210_sysclass = {
- .name = "s5pv210-core",
+struct bus_type s5pv210_subsys = {
+ .name = "s5pv210-core",
+ .dev_name = "s5pv210-core",
};
-static struct sys_device s5pv210_sysdev = {
- .cls = &s5pv210_sysclass,
+static struct device s5pv210_dev = {
+ .bus = &s5pv210_subsys,
};
static int __init s5pv210_core_init(void)
{
- return sysdev_class_register(&s5pv210_sysclass);
+ return subsys_system_register(&s5pv210_subsys, NULL);
}
-
core_initcall(s5pv210_core_init);
int __init s5pv210_init(void)
@@ -196,8 +251,31 @@
/* set idle function */
pm_idle = s5pv210_idle;
- /* set sw_reset function */
- s5p_reset_hook = s5pv210_sw_reset;
+ return device_register(&s5pv210_dev);
+}
- return sysdev_register(&s5pv210_sysdev);
+static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
+ [0] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+
+void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->clocks = s5pv210_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
+ }
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
}
diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h
new file mode 100644
index 0000000..6ed2af5
--- /dev/null
+++ b/arch/arm/mach-s5pv210/common.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5PV210 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H
+#define __ARCH_ARM_MACH_S5PV210_COMMON_H
+
+void s5pv210_init_io(struct map_desc *mach_desc, int size);
+void s5pv210_init_irq(void);
+
+void s5pv210_register_clocks(void);
+void s5pv210_setup_clocks(void);
+
+void s5pv210_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern int s5pv210_init(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
index 3aa41ac..bebca1b 100644
--- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -10,45 +10,8 @@
* published by the Free Software Foundation.
*/
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =VA_VIC0
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, # S5P_IRQ_OFFSET + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- @ otherwise try vic2
- addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- @ otherwise try vic3
- addeq \tmp, \base, #(VA_VIC3 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
index af8a200..bf288ce 100644
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/system-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
deleted file mode 100644
index a6c659d..0000000
--- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * S5PV210 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
deleted file mode 100644
index 4865ae2..0000000
--- a/arch/arm/mach-s5pv210/init.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pv210.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
- [0] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->clocks = s5pv210_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
- }
- }
-
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 5811a96..6f7dfe9 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -22,6 +22,7 @@
#include <linux/input.h>
#include <linux/gpio.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -32,7 +33,6 @@
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
@@ -41,6 +41,8 @@
#include <plat/s5p-time.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -644,7 +646,7 @@
static void __init aquila_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -680,7 +682,9 @@
Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
.timer = &s5p_timer,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 15edcae..12c6937 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -27,6 +27,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -37,7 +38,6 @@
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
@@ -54,6 +54,8 @@
#include <media/s5p_fimc.h>
#include <media/noon010pc30.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -890,7 +892,7 @@
static void __init goni_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -956,8 +958,10 @@
/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
.timer = &s5p_timer,
.reserve = &goni_reserve,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index f7266bb..b323983 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -13,8 +13,9 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/i2c.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -24,7 +25,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/ata.h>
@@ -32,6 +32,8 @@
#include <plat/pm.h>
#include <plat/s5p-time.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -109,7 +111,7 @@
static void __init smdkc110_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -138,7 +140,9 @@
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
.timer = &s5p_timer,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index a9106c3..b4021dd 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,13 +13,14 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/dm9000.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -33,7 +34,6 @@
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/gpio-cfg.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
@@ -47,6 +47,8 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -273,11 +275,12 @@
static struct platform_pwm_backlight_data smdkv210_bl_data = {
.pwm_id = 3,
+ .pwm_period_ns = 1000,
};
static void __init smdkv210_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
@@ -315,7 +318,9 @@
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
.timer = &s5p_timer,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 97cc066..74e99bc 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -23,12 +24,13 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
#include <plat/s5p-time.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -102,7 +104,7 @@
static void __init torbreck_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -127,7 +129,9 @@
/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
.timer = &s5p_timer,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index f149d27..677c71c 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -133,7 +133,7 @@
s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
}
-static int s5pv210_pm_add(struct sys_device *sysdev)
+static int s5pv210_pm_add(struct device *dev)
{
pm_cpu_prep = s5pv210_pm_prepare;
pm_cpu_sleep = s5pv210_cpu_suspend;
@@ -141,13 +141,15 @@
return 0;
}
-static struct sysdev_driver s5pv210_pm_driver = {
- .add = s5pv210_pm_add,
+static struct subsys_interface s5pv210_pm_interface = {
+ .name = "s5pv210_pm",
+ .subsys = &s5pv210_subsys,
+ .add_dev = s5pv210_pm_add,
};
static __init int s5pv210_pm_drvinit(void)
{
- return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+ return subsys_interface_register(&s5pv210_pm_interface);
}
arch_initcall(s5pv210_pm_drvinit);
diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot
index 5a616f6..f7951aa 100644
--- a/arch/arm/mach-sa1100/Makefile.boot
+++ b/arch/arm/mach-sa1100/Makefile.boot
@@ -1,5 +1,5 @@
-ifeq ($(CONFIG_ARCH_SA1100),y)
- zreladdr-$(CONFIG_SA1111) += 0xc0208000
+ifeq ($(CONFIG_SA1111),y)
+ zreladdr-y += 0xc0208000
else
zreladdr-y += 0xc0008000
endif
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 3dd133f..6b93e20 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -455,4 +455,5 @@
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index bda83e1..b07a2c0 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -309,4 +309,5 @@
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 7f3da4b..11bb6d0 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -139,4 +139,5 @@
.init_irq = cerf_init_irq,
.timer = &sa1100_timer,
.init_machine = cerf_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2965cc9..b9060e2 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -387,4 +387,5 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 5fa5ae1..bb10ee2 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -126,6 +126,17 @@
PMCR = PMCR_SF;
}
+void sa11x0_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ /* Use on-chip reset capability */
+ RSRR = RSRR_SWR;
+ }
+}
+
static void sa11x0_register_device(struct platform_device *dev, void *data)
{
int err;
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index b7a9a60..33268cf 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -10,6 +10,7 @@
extern void __init sa1100_map_io(void);
extern void __init sa1100_init_irq(void);
extern void __init sa1100_init_gpio(void);
+extern void sa11x0_restart(char, const char *);
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index b30733a..1e6b3c1 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -89,5 +89,6 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3100_mach_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6fd324d..6b58e74 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -130,5 +130,6 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3600_mach_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 30f4a55..c01bb36 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -200,4 +200,5 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = hackkit_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index ba9da9f..e17b208 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -3,20 +3,7 @@
*
* Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
*/
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- /* Jump into ROM at address 0 */
- cpu_reset(0);
- } else {
- /* Use on-chip reset capability */
- RSRR = RSRR_SWR;
- }
-}
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
deleted file mode 100644
index b3d0023..0000000
--- a/arch/arm/mach-sa1100/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/vmalloc.h
- */
-#define VMALLOC_END (0xe8000000UL)
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 77198fe..ee121d6 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -373,4 +373,5 @@
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 5bc59d0..af4e276 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -66,4 +66,5 @@
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
.timer = &sa1100_timer,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 032f388..85f6ee6 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -19,6 +19,7 @@
#include <asm/mach-types.h>
#include <asm/setup.h>
+#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -116,4 +117,5 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = nanoengine_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 65161f2..9307df0 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -150,4 +150,5 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = pleb_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 1cccbf5..318b2b7 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -87,4 +87,5 @@
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = shannon_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 4790f3f..e17c04d 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -396,4 +396,5 @@
.map_io = simpad_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index fa66024..69e3353 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -12,7 +12,6 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/sched.h> /* just for sched_clock() - funny that */
#include <linux/timex.h>
#include <linux/clockchips.h>
@@ -20,29 +19,9 @@
#include <asm/sched_clock.h>
#include <mach/hardware.h>
-/*
- * This is the SA11x0 sched_clock implementation.
- */
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz,
- * NSEC_PER_SEC, 60).
- * This gives a resolution of about 271ns and a wrap period of about 19min.
- */
-#define SC_MULT 2275555556u
-#define SC_SHIFT 23
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace sa1100_read_sched_clock(void)
{
- u32 cyc = OSCR;
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-static void notrace sa1100_update_sched_clock(void)
-{
- u32 cyc = OSCR;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return OSCR;
}
#define MIN_OSCR_DELTA 2
@@ -109,8 +88,7 @@
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32,
- 3686400, SC_MULT, SC_SHIFT);
+ setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
ckevt_sa1100_osmr0.max_delta_ns =
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index feda3ca..a851c25 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -26,10 +26,9 @@
#define ROMCARD_SIZE 0x08000000
#define ROMCARD_START 0x10000000
-void arch_reset(char mode, const char *cmd)
+static void shark_restart(char mode, const char *cmd)
{
short temp;
- local_irq_disable();
/* Reset the Machine via pc[3] of the sequoia chipset */
outw(0x09,0x24);
temp=inw(0x26);
@@ -157,4 +156,5 @@
.init_irq = shark_init_irq,
.timer = &shark_timer,
.dma_zone_size = SZ_4M,
+ .restart = shark_restart,
MACHINE_END
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index 21c373b..1b2f2c5 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,9 +6,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-/* Found in arch/mach-shark/core.c */
-extern void arch_reset(char mode, const char *cmd);
-
static inline void arch_idle(void)
{
}
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
deleted file mode 100644
index b10df98..0000000
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/vmalloc.h
- */
-#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 737bdc6..5ca1f9d 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -28,7 +28,6 @@
obj-$(CONFIG_ARCH_SH7367) += entry-intc.o
obj-$(CONFIG_ARCH_SH7377) += entry-intc.o
obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
-obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index b862e9f..a4e6ca0 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -466,8 +466,6 @@
static void __init ag5evm_map_io(void)
{
iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh73a0_add_early_devices();
@@ -607,8 +605,9 @@
MACHINE_START(AG5EVM, "ag5evm")
.map_io = ag5evm_map_io,
+ .nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
- .handle_irq = shmobile_handle_irq_gic,
+ .handle_irq = gic_handle_irq,
.init_machine = ag5evm_init,
.timer = &ag5evm_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 4c865ec..6a6f9f7 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1172,8 +1172,6 @@
static void __init ap4evb_map_io(void)
{
iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 8b620bf..72d5572 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -261,8 +261,6 @@
static void __init g3evm_map_io(void)
{
iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 7719ddc..2220b88 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -275,8 +275,6 @@
static void __init g4evm_map_io(void)
{
iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index bd9a784..857ceee 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -33,6 +33,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mfd/tmio.h>
@@ -56,7 +57,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(33), /* PINTA2 @ PORT144 */
+ .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */
.flags = IORESOURCE_IRQ,
},
};
@@ -157,10 +158,6 @@
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
- GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
- GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
- GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
- GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
@@ -179,6 +176,119 @@
},
};
+/* TPU LED */
+static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
+ .name = "V2513",
+ .pin_gpio_fn = GPIO_FN_TPU1TO2,
+ .pin_gpio = GPIO_PORT153,
+ .channel_offset = 0x90,
+ .timer_bit = 2,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu12_resources[] = {
+ [0] = {
+ .name = "TPU12",
+ .start = 0xe6610090,
+ .end = 0xe66100b5,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu12_device = {
+ .name = "leds-renesas-tpu",
+ .id = 12,
+ .dev = {
+ .platform_data = &led_renesas_tpu12_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu12_resources),
+ .resource = tpu12_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
+ .name = "V2514",
+ .pin_gpio_fn = GPIO_FN_TPU4TO1,
+ .pin_gpio = GPIO_PORT199,
+ .channel_offset = 0x50,
+ .timer_bit = 1,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu41_resources[] = {
+ [0] = {
+ .name = "TPU41",
+ .start = 0xe6640050,
+ .end = 0xe6640075,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu41_device = {
+ .name = "leds-renesas-tpu",
+ .id = 41,
+ .dev = {
+ .platform_data = &led_renesas_tpu41_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu41_resources),
+ .resource = tpu41_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
+ .name = "V2515",
+ .pin_gpio_fn = GPIO_FN_TPU2TO1,
+ .pin_gpio = GPIO_PORT197,
+ .channel_offset = 0x50,
+ .timer_bit = 1,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu21_resources[] = {
+ [0] = {
+ .name = "TPU21",
+ .start = 0xe6620050,
+ .end = 0xe6620075,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu21_device = {
+ .name = "leds-renesas-tpu",
+ .id = 21,
+ .dev = {
+ .platform_data = &led_renesas_tpu21_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu21_resources),
+ .resource = tpu21_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
+ .name = "KEYLED",
+ .pin_gpio_fn = GPIO_FN_TPU3TO0,
+ .pin_gpio = GPIO_PORT163,
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu30_resources[] = {
+ [0] = {
+ .name = "TPU30",
+ .start = 0xe6630010,
+ .end = 0xe6630035,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu30_device = {
+ .name = "leds-renesas-tpu",
+ .id = 30,
+ .dev = {
+ .platform_data = &led_renesas_tpu30_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu30_resources),
+ .resource = tpu30_resources,
+};
+
/* MMCIF */
static struct resource mmcif_resources[] = {
[0] = {
@@ -291,6 +401,10 @@
&keysc_device,
&gpio_keys_device,
&gpio_leds_device,
+ &leds_tpu12_device,
+ &leds_tpu41_device,
+ &leds_tpu21_device,
+ &leds_tpu30_device,
&mmcif_device,
&sdhi0_device,
&sdhi1_device,
@@ -317,18 +431,6 @@
shmobile_setup_console();
}
-#define PINTER0A 0xe69000a0
-#define PINTCR0A 0xe69000b0
-
-void __init kota2_init_irq(void)
-{
- sh73a0_init_irq();
-
- /* setup PINT: enable PINTA2 as active low */
- __raw_writel(1 << 29, PINTER0A);
- __raw_writew(2 << 10, PINTCR0A);
-}
-
static void __init kota2_init(void)
{
sh73a0_pinmux_init();
@@ -447,8 +549,9 @@
MACHINE_START(KOTA2, "kota2")
.map_io = kota2_map_io,
- .init_irq = kota2_init_irq,
- .handle_irq = shmobile_handle_irq_gic,
+ .nr_irqs = NR_IRQS_LEGACY,
+ .init_irq = sh73a0_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = kota2_init,
.timer = &kota2_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9c5e598..ed52566 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1390,8 +1390,6 @@
static void __init mackerel_map_io(void)
{
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 8ea8c81..34944d0 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -131,6 +131,7 @@
.ops = &main_clk_ops,
};
+/* Divide Main clock by two */
static struct clk main_div2_clk = {
.ops = &div2_clk_ops,
.parent = &main_clk,
@@ -328,7 +329,7 @@
vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
[DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
- [DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, 0,
+ [DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
[DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
@@ -370,6 +371,7 @@
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
MSTP314, MSTP313, MSTP312, MSTP311,
+ MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
MSTP_NR };
@@ -403,6 +405,10 @@
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
+ [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
+ [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
+ [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
+ [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
@@ -452,6 +458,10 @@
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
diff --git a/arch/arm/mach-shmobile/entry-gic.S b/arch/arm/mach-shmobile/entry-gic.S
deleted file mode 100644
index e20239b..0000000
--- a/arch/arm/mach-shmobile/entry-gic.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * ARM Interrupt demux handler using GIC
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2011 Paul Mundt
- * Copyright (C) 2010 - 2011 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/assembler.h>
-#include <asm/entry-macro-multi.S>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/entry-macro-gic.S>
-
- arch_irq_handler shmobile_handle_irq_gic
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index d055d05..13a18d3 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -7,7 +7,6 @@
struct clk;
extern int clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
-extern void shmobile_handle_irq_gic(struct pt_regs *);
extern struct platform_suspend_ops shmobile_suspend_ops;
struct cpuidle_driver;
extern void (*shmobile_cpuidle_modes[])(void);
@@ -35,8 +34,8 @@
extern void sh7372_clock_init(void);
extern void sh7372_pinmux_init(void);
extern void sh7372_pm_init(void);
-extern void sh7372_resume_core_standby_a3sm(void);
-extern int sh7372_do_idle_a3sm(unsigned long unused);
+extern void sh7372_resume_core_standby_sysc(void);
+extern int sh7372_do_idle_sysc(unsigned long sleep_mode);
extern struct clk sh7372_extal1_clk;
extern struct clk sh7372_extal2_clk;
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index 8d4a416..2a57b29 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -18,14 +18,5 @@
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- .endm
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 7bf0890..de795b4 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -12,8 +12,6 @@
#include <linux/kernel.h>
#include <linux/errno.h>
-
-#define ARCH_NR_GPIOS 1024
#include <linux/sh_pfc.h>
#ifdef CONFIG_GPIOLIB
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index 84532f9..8254ab8 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -480,11 +480,10 @@
struct sh7372_pm_domain {
struct generic_pm_domain genpd;
struct dev_power_governor *gov;
- void (*suspend)(void);
+ int (*suspend)(void);
void (*resume)(void);
unsigned int bit_shift;
bool no_debug;
- bool stay_on;
};
static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d)
@@ -499,6 +498,7 @@
extern struct sh7372_pm_domain sh7372_a4r;
extern struct sh7372_pm_domain sh7372_a3rv;
extern struct sh7372_pm_domain sh7372_a3ri;
+extern struct sh7372_pm_domain sh7372_a4s;
extern struct sh7372_pm_domain sh7372_a3sp;
extern struct sh7372_pm_domain sh7372_a3sg;
@@ -515,5 +515,7 @@
extern void sh7372_intcs_suspend(void);
extern void sh7372_intcs_resume(void);
+extern void sh7372_intca_suspend(void);
+extern void sh7372_intca_resume(void);
#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
index 76a687e..956ac18 100644
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -8,7 +8,7 @@
static inline void arch_reset(char mode, const char *cmd)
{
- cpu_reset(0);
+ soft_restart(0);
}
#endif
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
deleted file mode 100644
index 2b8fd8b..0000000
--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_VMALLOC_H
-#define __ASM_MACH_VMALLOC_H
-
-/* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000UL
-
-#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 2d8856d..89afcab 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -535,6 +535,7 @@
static struct intc_desc intcs_desc __initdata = {
.name = "sh7372-intcs",
.force_enable = ENABLED_INTCS,
+ .skip_syscore_suspend = true,
.resource = intcs_resources,
.num_resources = ARRAY_SIZE(intcs_resources),
.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
@@ -611,3 +612,52 @@
for (k = 0x80; k <= 0x9c; k += 4)
__raw_writeb(ffd5[k], intcs_ffd5 + k);
}
+
+static unsigned short e694[0x200];
+static unsigned short e695[0x200];
+
+void sh7372_intca_suspend(void)
+{
+ int k;
+
+ for (k = 0x00; k <= 0x38; k += 4)
+ e694[k] = __raw_readw(0xe6940000 + k);
+
+ for (k = 0x80; k <= 0xb4; k += 4)
+ e694[k] = __raw_readb(0xe6940000 + k);
+
+ for (k = 0x180; k <= 0x1b4; k += 4)
+ e694[k] = __raw_readb(0xe6940000 + k);
+
+ for (k = 0x00; k <= 0x50; k += 4)
+ e695[k] = __raw_readw(0xe6950000 + k);
+
+ for (k = 0x80; k <= 0xa8; k += 4)
+ e695[k] = __raw_readb(0xe6950000 + k);
+
+ for (k = 0x180; k <= 0x1a8; k += 4)
+ e695[k] = __raw_readb(0xe6950000 + k);
+}
+
+void sh7372_intca_resume(void)
+{
+ int k;
+
+ for (k = 0x00; k <= 0x38; k += 4)
+ __raw_writew(e694[k], 0xe6940000 + k);
+
+ for (k = 0x80; k <= 0xb4; k += 4)
+ __raw_writeb(e694[k], 0xe6940000 + k);
+
+ for (k = 0x180; k <= 0x1b4; k += 4)
+ __raw_writeb(e694[k], 0xe6940000 + k);
+
+ for (k = 0x00; k <= 0x50; k += 4)
+ __raw_writew(e695[k], 0xe6950000 + k);
+
+ for (k = 0x80; k <= 0xa8; k += 4)
+ __raw_writeb(e695[k], 0xe6950000 + k);
+
+ for (k = 0x180; k <= 0x1a8; k += 4)
+ __raw_writeb(e695[k], 0xe6950000 + k);
+}
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 34bbcbf..77b8fc1 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -82,11 +82,12 @@
struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
unsigned int mask = 1 << sh7372_pd->bit_shift;
- if (sh7372_pd->suspend)
- sh7372_pd->suspend();
+ if (sh7372_pd->suspend) {
+ int ret = sh7372_pd->suspend();
- if (sh7372_pd->stay_on)
- return 0;
+ if (ret)
+ return ret;
+ }
if (__raw_readl(PSTR) & mask) {
unsigned int retry_count;
@@ -101,8 +102,8 @@
}
if (!sh7372_pd->no_debug)
- pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n",
- mask, __raw_readl(PSTR));
+ pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n",
+ genpd->name, mask, __raw_readl(PSTR));
return 0;
}
@@ -113,9 +114,6 @@
unsigned int retry_count;
int ret = 0;
- if (sh7372_pd->stay_on)
- goto out;
-
if (__raw_readl(PSTR) & mask)
goto out;
@@ -133,8 +131,8 @@
ret = -EIO;
if (!sh7372_pd->no_debug)
- pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n",
- mask, __raw_readl(PSTR));
+ pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n",
+ sh7372_pd->genpd.name, mask, __raw_readl(PSTR));
out:
if (ret == 0 && sh7372_pd->resume && do_resume)
@@ -148,35 +146,60 @@
return __pd_power_up(to_sh7372_pd(genpd), true);
}
-static void sh7372_a4r_suspend(void)
+static int sh7372_a4r_suspend(void)
{
sh7372_intcs_suspend();
__raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */
+ return 0;
}
static bool pd_active_wakeup(struct device *dev)
{
- return true;
+ bool (*active_wakeup)(struct device *dev);
+
+ active_wakeup = dev_gpd_data(dev)->ops.active_wakeup;
+ return active_wakeup ? active_wakeup(dev) : true;
}
-static bool sh7372_power_down_forbidden(struct dev_pm_domain *domain)
+static int sh7372_stop_dev(struct device *dev)
{
- return false;
+ int (*stop)(struct device *dev);
+
+ stop = dev_gpd_data(dev)->ops.stop;
+ if (stop) {
+ int ret = stop(dev);
+ if (ret)
+ return ret;
+ }
+ return pm_clk_suspend(dev);
}
-struct dev_power_governor sh7372_always_on_gov = {
- .power_down_ok = sh7372_power_down_forbidden,
-};
+static int sh7372_start_dev(struct device *dev)
+{
+ int (*start)(struct device *dev);
+ int ret;
+
+ ret = pm_clk_resume(dev);
+ if (ret)
+ return ret;
+
+ start = dev_gpd_data(dev)->ops.start;
+ if (start)
+ ret = start(dev);
+
+ return ret;
+}
void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
{
struct generic_pm_domain *genpd = &sh7372_pd->genpd;
+ struct dev_power_governor *gov = sh7372_pd->gov;
- pm_genpd_init(genpd, sh7372_pd->gov, false);
- genpd->stop_device = pm_clk_suspend;
- genpd->start_device = pm_clk_resume;
+ pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
+ genpd->dev_ops.stop = sh7372_stop_dev;
+ genpd->dev_ops.start = sh7372_start_dev;
+ genpd->dev_ops.active_wakeup = pd_active_wakeup;
genpd->dev_irq_safe = true;
- genpd->active_wakeup = pd_active_wakeup;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
__pd_power_up(sh7372_pd, false);
@@ -199,48 +222,73 @@
}
struct sh7372_pm_domain sh7372_a4lc = {
+ .genpd.name = "A4LC",
.bit_shift = 1,
};
struct sh7372_pm_domain sh7372_a4mp = {
+ .genpd.name = "A4MP",
.bit_shift = 2,
};
struct sh7372_pm_domain sh7372_d4 = {
+ .genpd.name = "D4",
.bit_shift = 3,
};
struct sh7372_pm_domain sh7372_a4r = {
+ .genpd.name = "A4R",
.bit_shift = 5,
- .gov = &sh7372_always_on_gov,
.suspend = sh7372_a4r_suspend,
.resume = sh7372_intcs_resume,
- .stay_on = true,
};
struct sh7372_pm_domain sh7372_a3rv = {
+ .genpd.name = "A3RV",
.bit_shift = 6,
};
struct sh7372_pm_domain sh7372_a3ri = {
+ .genpd.name = "A3RI",
.bit_shift = 8,
};
-struct sh7372_pm_domain sh7372_a3sp = {
- .bit_shift = 11,
- .gov = &sh7372_always_on_gov,
- .no_debug = true,
-};
-
-static void sh7372_a3sp_init(void)
+static int sh7372_a4s_suspend(void)
{
- /* serial consoles make use of SCIF hardware located in A3SP,
- * keep such power domain on if "no_console_suspend" is set.
+ /*
+ * The A4S domain contains the CPU core and therefore it should
+ * only be turned off if the CPU is in use.
*/
- sh7372_a3sp.stay_on = !console_suspend_enabled;
+ return -EBUSY;
}
+struct sh7372_pm_domain sh7372_a4s = {
+ .genpd.name = "A4S",
+ .bit_shift = 10,
+ .gov = &pm_domain_always_on_gov,
+ .no_debug = true,
+ .suspend = sh7372_a4s_suspend,
+};
+
+static int sh7372_a3sp_suspend(void)
+{
+ /*
+ * Serial consoles make use of SCIF hardware located in A3SP,
+ * keep such power domain on if "no_console_suspend" is set.
+ */
+ return console_suspend_enabled ? -EBUSY : 0;
+}
+
+struct sh7372_pm_domain sh7372_a3sp = {
+ .genpd.name = "A3SP",
+ .bit_shift = 11,
+ .gov = &pm_domain_always_on_gov,
+ .no_debug = true,
+ .suspend = sh7372_a3sp_suspend,
+};
+
struct sh7372_pm_domain sh7372_a3sg = {
+ .genpd.name = "A3SG",
.bit_shift = 13,
};
@@ -257,11 +305,16 @@
return 0;
}
-static void sh7372_enter_core_standby(void)
+static void sh7372_set_reset_vector(unsigned long address)
{
/* set reset vector, translate 4k */
- __raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR);
+ __raw_writel(address, SBAR);
__raw_writel(0, APARMBAREA);
+}
+
+static void sh7372_enter_core_standby(void)
+{
+ sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
/* enter sleep mode with SYSTBCR to 0x10 */
__raw_writel(0x10, SYSTBCR);
@@ -274,27 +327,22 @@
#endif
#ifdef CONFIG_SUSPEND
-static void sh7372_enter_a3sm_common(int pllc0_on)
+static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode)
{
- /* set reset vector, translate 4k */
- __raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR);
- __raw_writel(0, APARMBAREA);
-
if (pllc0_on)
__raw_writel(0, PLLC01STPCR);
else
__raw_writel(1 << 28, PLLC01STPCR);
- __raw_writel(0, PDNSEL); /* power-down A3SM only, not A4S */
__raw_readl(WUPSFAC); /* read wakeup int. factor before sleep */
- cpu_suspend(0, sh7372_do_idle_a3sm);
+ cpu_suspend(sleep_mode, sh7372_do_idle_sysc);
__raw_readl(WUPSFAC); /* read wakeup int. factor after wakeup */
/* disable reset vector translation */
__raw_writel(0, SBAR);
}
-static int sh7372_a3sm_valid(unsigned long *mskp, unsigned long *msk2p)
+static int sh7372_sysc_valid(unsigned long *mskp, unsigned long *msk2p)
{
unsigned long mstpsr0, mstpsr1, mstpsr2, mstpsr3, mstpsr4;
unsigned long msk, msk2;
@@ -382,7 +430,7 @@
*irqcr2p = irqcr2;
}
-static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2)
+static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2)
{
u16 irqcrx_low, irqcrx_high, irqcry_low, irqcry_high;
unsigned long tmp;
@@ -415,6 +463,22 @@
__raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR3);
__raw_writel((irqcry_high << 16) | irqcry_low, IRQCR4);
}
+
+static void sh7372_enter_a3sm_common(int pllc0_on)
+{
+ sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
+ sh7372_enter_sysc(pllc0_on, 1 << 12);
+}
+
+static void sh7372_enter_a4s_common(int pllc0_on)
+{
+ sh7372_intca_suspend();
+ memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
+ sh7372_set_reset_vector(SMFRAM);
+ sh7372_enter_sysc(pllc0_on, 1 << 10);
+ sh7372_intca_resume();
+}
+
#endif
#ifdef CONFIG_CPU_IDLE
@@ -448,14 +512,20 @@
unsigned long msk, msk2;
/* check active clocks to determine potential wakeup sources */
- if (sh7372_a3sm_valid(&msk, &msk2)) {
-
+ if (sh7372_sysc_valid(&msk, &msk2)) {
/* convert INTC mask and sense to SYSC mask and sense */
- sh7372_setup_a3sm(msk, msk2);
+ sh7372_setup_sysc(msk, msk2);
- /* enter A3SM sleep with PLLC0 off */
- pr_debug("entering A3SM\n");
- sh7372_enter_a3sm_common(0);
+ if (!console_suspend_enabled &&
+ sh7372_a4s.genpd.status == GPD_STATE_POWER_OFF) {
+ /* enter A4S sleep with PLLC0 off */
+ pr_debug("entering A4S\n");
+ sh7372_enter_a4s_common(0);
+ } else {
+ /* enter A3SM sleep with PLLC0 off */
+ pr_debug("entering A3SM\n");
+ sh7372_enter_a3sm_common(0);
+ }
} else {
/* default to Core Standby that supports all wakeup sources */
pr_debug("entering Core Standby\n");
@@ -464,9 +534,37 @@
return 0;
}
+/**
+ * sh7372_pm_notifier_fn - SH7372 PM notifier routine.
+ * @notifier: Unused.
+ * @pm_event: Event being handled.
+ * @unused: Unused.
+ */
+static int sh7372_pm_notifier_fn(struct notifier_block *notifier,
+ unsigned long pm_event, void *unused)
+{
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ /*
+ * This is necessary, because the A4R domain has to be "on"
+ * when suspend_device_irqs() and resume_device_irqs() are
+ * executed during system suspend and resume, respectively, so
+ * that those functions don't crash while accessing the INTCS.
+ */
+ pm_genpd_poweron(&sh7372_a4r.genpd);
+ break;
+ case PM_POST_SUSPEND:
+ pm_genpd_poweroff_unused();
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
static void sh7372_suspend_init(void)
{
shmobile_suspend_ops.enter = sh7372_enter_suspend;
+ pm_notifier(sh7372_pm_notifier_fn, 0);
}
#else
static void sh7372_suspend_init(void) {}
@@ -482,8 +580,6 @@
/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
__raw_writel(0, PDNSEL);
- sh7372_a3sp_init();
-
sh7372_suspend_init();
sh7372_cpuidle_init();
}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2380389..c197f9d 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -994,12 +994,16 @@
sh7372_init_pm_domain(&sh7372_a4r);
sh7372_init_pm_domain(&sh7372_a3rv);
sh7372_init_pm_domain(&sh7372_a3ri);
- sh7372_init_pm_domain(&sh7372_a3sg);
+ sh7372_init_pm_domain(&sh7372_a4s);
sh7372_init_pm_domain(&sh7372_a3sp);
+ sh7372_init_pm_domain(&sh7372_a3sg);
sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv);
sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc);
+ sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sg);
+ sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sp);
+
platform_add_devices(sh7372_early_devices,
ARRAY_SIZE(sh7372_early_devices));
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index f3ab3c5..1d56467 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -37,13 +37,18 @@
#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
.align 12
.text
- .global sh7372_resume_core_standby_a3sm
-sh7372_resume_core_standby_a3sm:
+ .global sh7372_resume_core_standby_sysc
+sh7372_resume_core_standby_sysc:
ldr pc, 1f
1: .long cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
- .global sh7372_do_idle_a3sm
-sh7372_do_idle_a3sm:
+#define SPDCR 0xe6180008
+
+ /* A3SM & A4S power down */
+ .global sh7372_do_idle_sysc
+sh7372_do_idle_sysc:
+ mov r8, r0 /* sleep mode passed in r0 */
+
/*
* Clear the SCTLR.C bit to prevent further data cache
* allocation. Clearing SCTLR.C would make all the data accesses
@@ -80,13 +85,9 @@
dsb
dmb
-#define SPDCR 0xe6180008
-#define A3SM (1 << 12)
-
- /* A3SM power down */
+ /* SYSC power down */
ldr r0, =SPDCR
- ldr r1, =A3SM
- str r1, [r0]
+ str r8, [r0]
1:
b 1b
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
index 53da422..de3bb41 100644
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -11,35 +11,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =VA_SPEAR3XX_ML1_VIC_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status
- teq \irqstat, #0
- beq 1001f @ this will set/reset
- @ zero register
- /*
- * Following code will find bit position of least significang
- * bit set in irqstat, using following equation
- * least significant bit set in n = (n & ~(n-1))
- */
- sub \tmp, \irqstat, #1 @ tmp = irqstat - 1
- mvn \tmp, \tmp @ tmp = ~tmp
- and \irqstat, \irqstat, \tmp @ irqstat &= tmp
- /* Now, irqstat is = bit no. of 1st bit set in vic irq status */
- clz \tmp, \irqstat @ tmp = leading zeros
- rsb \irqnr, \tmp, #0x1F @ irqnr = 32 - tmp - 1
-
-1001: /* EQ will be set if no irqs pending */
- .endm
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index b8f31c3..14276e5 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -42,6 +42,8 @@
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
+void spear_restart(char, const char *);
+
/* pad mux declarations */
#define PMX_FIRDA_MASK (1 << 14)
#define PMX_I2C_MASK (1 << 13)
diff --git a/arch/arm/mach-spear3xx/include/mach/vmalloc.h b/arch/arm/mach-spear3xx/include/mach/vmalloc.h
deleted file mode 100644
index df977b3..0000000
--- a/arch/arm/mach-spear3xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <plat/vmalloc.h>
-
-#endif /* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index a5ff98e..3462ab9 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -11,6 +11,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
@@ -67,6 +68,8 @@
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear300_evb_init,
+ .restart = spear_restart,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index 45d180d..f92c499 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -11,6 +11,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
@@ -73,6 +74,8 @@
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear310_evb_init,
+ .restart = spear_restart,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index 2287984..105334a 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -11,6 +11,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
@@ -71,6 +72,8 @@
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear320_evb_init,
+ .restart = spear_restart,
MACHINE_END
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
index 8a0b0ed..d490a91 100644
--- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
@@ -11,44 +11,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status
- mov \irqnr, #0
- teq \irqstat, #0
- bne 1001f
- ldr \base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status
- teq \irqstat, #0
- beq 1002f @ this will set/reset
- @ zero register
- mov \irqnr, #32
-1001:
- /*
- * Following code will find bit position of least significang
- * bit set in irqstat, using following equation
- * least significant bit set in n = (n & ~(n-1))
- */
- sub \tmp, \irqstat, #1 @ tmp = irqstat - 1
- mvn \tmp, \tmp @ tmp = ~tmp
- and \irqstat, \irqstat, \tmp @ irqstat &= tmp
- /* Now, irqstat is = bit no. of 1st bit set in vic irq status */
- clz \tmp, \irqstat @ tmp = leading zeros
-
- rsb \tmp, \tmp, #0x1F @ tmp = 32 - tmp - 1
- add \irqnr, \irqnr, \tmp
-
-1002: /* EQ will be set if no irqs pending */
- .endm
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 183f023..116b993 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -41,6 +41,8 @@
void __init spear600_init(void);
void __init spear6xx_clk_init(void);
+void spear_restart(char, const char *);
+
/* Add spear600 machine device structure declarations here */
#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/vmalloc.h b/arch/arm/mach-spear6xx/include/mach/vmalloc.h
deleted file mode 100644
index 4a0b56c..0000000
--- a/arch/arm/mach-spear6xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <plat/vmalloc.h>
-
-#endif /* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index 8238fe3..c6e4254 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -11,6 +11,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
@@ -46,6 +47,8 @@
.atag_offset = 0x100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &spear6xx_timer,
.init_machine = spear600_evb_init,
+ .restart = spear_restart,
MACHINE_END
diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig
deleted file mode 100644
index ad86415..0000000
--- a/arch/arm/mach-tcc8k/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if ARCH_TCC8K
-
-comment "TCC8000 systems:"
-
-config MACH_TCC8000_SDK
- bool "Telechips TCC8000-SDK development kit"
- default y
- help
- Support for the Telechips TCC8000-SDK board.
-
-endif
diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile
deleted file mode 100644
index 9bacf31..0000000
--- a/arch/arm/mach-tcc8k/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for TCC8K boards and common files.
-#
-
-# Common support
-obj-y += clock.o irq.o time.o io.o devices.o
-
-# Board specific support
-obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o
diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot
deleted file mode 100644
index 5e02d41..0000000
--- a/arch/arm/mach-tcc8k/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
-initrd_phys-y := 0x20800000
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
deleted file mode 100644
index 777a5bb..0000000
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/clock.h>
-#include <mach/tcc-nand.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define XI_FREQUENCY 12000000
-#define XTI_FREQUENCY 32768
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND */
-static struct tcc_nand_platform_data tcc8k_sdk_nand_data = {
- .width = 1,
- .hw_ecc = 0,
-};
-#endif
-
-static void __init tcc8k_init(void)
-{
-#ifdef CONFIG_MTD_NAND_TCC
- tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data;
- platform_device_register(&tcc_nand_device);
-#endif
-}
-
-static void __init tcc8k_init_timer(void)
-{
- tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY);
-}
-
-static struct sys_timer tcc8k_timer = {
- .init = tcc8k_init_timer,
-};
-
-static void __init tcc8k_map_io(void)
-{
- tcc8k_map_common_io();
-
- /* set PLL0 clock to 96MHz, adapt UART0 divisor */
- __raw_writel(0x00026003, CKC_BASE + PLL0CFG_OFFS);
- __raw_writel(0x10000001, CKC_BASE + ACLKUART0_OFFS);
-
- /* set PLL1 clock to 192MHz */
- __raw_writel(0x00016003, CKC_BASE + PLL1CFG_OFFS);
-
- /* set PLL2 clock to 48MHz */
- __raw_writel(0x00036003, CKC_BASE + PLL2CFG_OFFS);
-
- /* with CPU freq higher than 150 MHz, need extra DTCM wait */
- __raw_writel(0x00000001, SCFG_BASE + DTCMWAIT_OFFS);
-
- /* PLL locking time as specified */
- udelay(300);
-}
-
-MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .atag_offset = 0x100,
- .map_io = tcc8k_map_io,
- .init_irq = tcc8k_init_irq,
- .init_machine = tcc8k_init,
- .timer = &tcc8k_timer,
-MACHINE_END
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
deleted file mode 100644
index e7cdae5..0000000
--- a/arch/arm/mach-tcc8k/clock.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * Lowlevel clock handling for Telechips TCC8xxx SoCs
- *
- * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/irqs.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define BCLKCTR0 (CKC_BASE + BCLKCTR0_OFFS)
-#define BCLKCTR1 (CKC_BASE + BCLKCTR1_OFFS)
-
-#define ACLKREF (CKC_BASE + ACLKREF_OFFS)
-#define ACLKUART0 (CKC_BASE + ACLKUART0_OFFS)
-#define ACLKUART1 (CKC_BASE + ACLKUART1_OFFS)
-#define ACLKUART2 (CKC_BASE + ACLKUART2_OFFS)
-#define ACLKUART3 (CKC_BASE + ACLKUART3_OFFS)
-#define ACLKUART4 (CKC_BASE + ACLKUART4_OFFS)
-#define ACLKI2C (CKC_BASE + ACLKI2C_OFFS)
-#define ACLKADC (CKC_BASE + ACLKADC_OFFS)
-#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS)
-#define ACLKLCD (CKC_BASE + ACLKLCD_OFFS)
-#define ACLKSDH0 (CKC_BASE + ACLKSDH0_OFFS)
-#define ACLKSDH1 (CKC_BASE + ACLKSDH1_OFFS)
-#define ACLKSPI0 (CKC_BASE + ACLKSPI0_OFFS)
-#define ACLKSPI1 (CKC_BASE + ACLKSPI1_OFFS)
-#define ACLKSPDIF (CKC_BASE + ACLKSPDIF_OFFS)
-#define ACLKC3DEC (CKC_BASE + ACLKC3DEC_OFFS)
-#define ACLKCAN0 (CKC_BASE + ACLKCAN0_OFFS)
-#define ACLKCAN1 (CKC_BASE + ACLKCAN1_OFFS)
-#define ACLKGSB0 (CKC_BASE + ACLKGSB0_OFFS)
-#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS)
-#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS)
-#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS)
-#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS)
-#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS)
-#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS)
-
-#define ACLK_MAX_DIV (0xfff + 1)
-
-/* Crystal frequencies */
-static unsigned long xi_rate, xti_rate;
-
-static void __iomem *pll_cfg_addr(int pll)
-{
- switch (pll) {
- case 0: return (CKC_BASE + PLL0CFG_OFFS);
- case 1: return (CKC_BASE + PLL1CFG_OFFS);
- case 2: return (CKC_BASE + PLL2CFG_OFFS);
- default:
- BUG();
- }
-}
-
-static int pll_enable(int pll, int enable)
-{
- u32 reg;
- void __iomem *addr = pll_cfg_addr(pll);
-
- reg = __raw_readl(addr);
- if (enable)
- reg &= ~PLLxCFG_PD;
- else
- reg |= PLLxCFG_PD;
-
- __raw_writel(reg, addr);
- return 0;
-}
-
-static int xi_enable(int enable)
-{
- u32 reg;
-
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- if (enable)
- reg |= CLKCTRL_XE;
- else
- reg &= ~CLKCTRL_XE;
-
- __raw_writel(reg, CKC_BASE + CLKCTRL_OFFS);
- return 0;
-}
-
-static int root_clk_enable(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return pll_enable(0, 1);
- case CLK_SRC_PLL1: return pll_enable(1, 1);
- case CLK_SRC_PLL2: return pll_enable(2, 1);
- case CLK_SRC_XI: return xi_enable(1);
- default:
- BUG();
- }
- return 0;
-}
-
-static int root_clk_disable(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return pll_enable(0, 0);
- case CLK_SRC_PLL1: return pll_enable(1, 0);
- case CLK_SRC_PLL2: return pll_enable(2, 0);
- case CLK_SRC_XI: return xi_enable(0);
- default:
- BUG();
- }
- return 0;
-}
-
-static int enable_clk(struct clk *clk)
-{
- u32 reg;
-
- if (clk->root_id != CLK_SRC_NOROOT)
- return root_clk_enable(clk->root_id);
-
- if (clk->aclkreg) {
- reg = __raw_readl(clk->aclkreg);
- reg |= ACLK_EN;
- __raw_writel(reg, clk->aclkreg);
- }
- if (clk->bclkctr) {
- reg = __raw_readl(clk->bclkctr);
- reg |= 1 << clk->bclk_shift;
- __raw_writel(reg, clk->bclkctr);
- }
- return 0;
-}
-
-static void disable_clk(struct clk *clk)
-{
- u32 reg;
-
- if (clk->root_id != CLK_SRC_NOROOT) {
- root_clk_disable(clk->root_id);
- return;
- }
-
- if (clk->bclkctr) {
- reg = __raw_readl(clk->bclkctr);
- reg &= ~(1 << clk->bclk_shift);
- __raw_writel(reg, clk->bclkctr);
- }
- if (clk->aclkreg) {
- reg = __raw_readl(clk->aclkreg);
- reg &= ~ACLK_EN;
- __raw_writel(reg, clk->aclkreg);
- }
-}
-
-static unsigned long get_rate_pll(int pll)
-{
- u32 reg;
- unsigned long s, m, p;
- void __iomem *addr = pll_cfg_addr(pll);
-
- reg = __raw_readl(addr);
- s = (reg >> 16) & 0x07;
- m = (reg >> 8) & 0xff;
- p = reg & 0x3f;
-
- return (m * xi_rate) / (p * (1 << s));
-}
-
-static unsigned long get_rate_pll_div(int pll)
-{
- u32 reg;
- unsigned long div = 0;
- void __iomem *addr;
-
- switch (pll) {
- case 0:
- addr = CKC_BASE + CLKDIVC0_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC0_P0E)
- div = (reg >> 24) & 0x3f;
- break;
- case 1:
- addr = CKC_BASE + CLKDIVC0_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC0_P1E)
- div = (reg >> 16) & 0x3f;
- break;
- case 2:
- addr = CKC_BASE + CLKDIVC1_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC1_P2E)
- div = reg & 0x3f;
- break;
- }
- return get_rate_pll(pll) / (div + 1);
-}
-
-static unsigned long get_rate_xi_div(void)
-{
- unsigned long div = 0;
- u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
- if (reg & CLKDIVC0_XE)
- div = (reg >> 8) & 0x3f;
-
- return xi_rate / (div + 1);
-}
-
-static unsigned long get_rate_xti_div(void)
-{
- unsigned long div = 0;
- u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
- if (reg & CLKDIVC0_XTE)
- div = reg & 0x3f;
-
- return xti_rate / (div + 1);
-}
-
-static unsigned long root_clk_get_rate(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return get_rate_pll(0);
- case CLK_SRC_PLL1: return get_rate_pll(1);
- case CLK_SRC_PLL2: return get_rate_pll(2);
- case CLK_SRC_PLL0DIV: return get_rate_pll_div(0);
- case CLK_SRC_PLL1DIV: return get_rate_pll_div(1);
- case CLK_SRC_PLL2DIV: return get_rate_pll_div(2);
- case CLK_SRC_XI: return xi_rate;
- case CLK_SRC_XTI: return xti_rate;
- case CLK_SRC_XIDIV: return get_rate_xi_div();
- case CLK_SRC_XTIDIV: return get_rate_xti_div();
- default: return 0;
- }
-}
-
-static unsigned long aclk_get_rate(struct clk *clk)
-{
- u32 reg;
- unsigned long div;
- unsigned int src;
-
- reg = __raw_readl(clk->aclkreg);
- div = reg & 0x0fff;
- src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK;
- return root_clk_get_rate(src) / (div + 1);
-}
-
-static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
-{
- unsigned long div, src, freq, r1, r2;
-
- if (!rate)
- return ACLK_MAX_DIV;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
- freq = root_clk_get_rate(src);
- div = freq / rate;
- if (!div)
- return 1;
- if (div >= ACLK_MAX_DIV)
- return ACLK_MAX_DIV;
- r1 = freq / div;
- r2 = freq / (div + 1);
- if ((rate - r2) < (r1 - rate))
- return div + 1;
-
- return div;
-}
-
-static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int src;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
-
- return root_clk_get_rate(src) / aclk_best_div(clk, rate);
-}
-
-static int aclk_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
-
- reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
- reg |= aclk_best_div(clk, rate) - 1;
- __raw_writel(reg, clk->aclkreg);
- return 0;
-}
-
-static unsigned long get_rate_sys(struct clk *clk)
-{
- unsigned int src;
-
- src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
- return root_clk_get_rate(src);
-}
-
-static unsigned long get_rate_bus(struct clk *clk)
-{
- unsigned int reg, sdiv, bdiv, rate;
-
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- rate = get_rate_sys(clk);
- sdiv = (reg >> 20) & 3;
- if (sdiv)
- rate /= sdiv + 1;
- bdiv = (reg >> 4) & 0xff;
- if (bdiv)
- rate /= bdiv + 1;
- return rate;
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
- unsigned int reg, div, fsys, fbus;
-
- fbus = get_rate_bus(clk);
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- if (reg & (1 << 29))
- return fbus;
- fsys = get_rate_sys(clk);
- div = (reg >> 16) & 0x0f;
- return fbus + ((fsys - fbus) * (div + 1)) / 16;
-}
-
-static unsigned long get_rate_root(struct clk *clk)
-{
- return root_clk_get_rate(clk->root_id);
-}
-
-static int aclk_set_parent(struct clk *clock, struct clk *parent)
-{
- u32 reg;
-
- if (clock->parent == parent)
- return 0;
-
- clock->parent = parent;
-
- if (!parent)
- return 0;
-
- if (parent->root_id == CLK_SRC_NOROOT)
- return 0;
- reg = __raw_readl(clock->aclkreg);
- reg &= ~ACLK_SEL_MASK;
- reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK;
- __raw_writel(reg, clock->aclkreg);
-
- return 0;
-}
-
-#define DEFINE_ROOT_CLOCK(name, ri, p) \
- static struct clk name = { \
- .root_id = ri, \
- .get_rate = get_rate_root, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .parent = p, \
- };
-
-#define DEFINE_SPECIAL_CLOCK(name, gr, p) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .get_rate = gr, \
- .parent = p, \
- };
-
-#define DEFINE_ACLOCK(name, bc, bs, ar) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .bclkctr = bc, \
- .bclk_shift = bs, \
- .aclkreg = ar, \
- .get_rate = aclk_get_rate, \
- .set_rate = aclk_set_rate, \
- .round_rate = aclk_round_rate, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .set_parent = aclk_set_parent, \
- };
-
-#define DEFINE_BCLOCK(name, bc, bs, gr, p) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .bclkctr = bc, \
- .bclk_shift = bs, \
- .get_rate = gr, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .parent = p, \
- };
-
-DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL)
-DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL)
-DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi)
-DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti)
-DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi)
-DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi)
-DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi)
-DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0)
-DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1)
-DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2)
-
-/* The following 3 clocks are special and are initialized explicitly later */
-DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL)
-DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys)
-DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys)
-
-DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT)
-DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX)
-DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ)
-DEFINE_ACLOCK(ref, NULL, 0, ACLKREF)
-DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0)
-DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1)
-DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2)
-DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3)
-DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4)
-DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C)
-DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC)
-DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH)
-DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD)
-DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0)
-DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1)
-DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0)
-DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1)
-DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF)
-DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC)
-DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0)
-DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1)
-DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0)
-DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1)
-DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2)
-DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3)
-DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH)
-
-DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL)
-DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL)
-DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL)
-DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL)
-DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL)
-DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL)
-DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL)
-DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL)
-DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL)
-DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL)
-DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL)
-DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL)
-DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL)
-DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL)
-DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL)
-DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL)
-DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL)
-DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL)
-DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL)
-DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL)
-DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL)
-DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL)
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "bus", bus)
- _REGISTER_CLOCK(NULL, "cpu", cpu)
- _REGISTER_CLOCK(NULL, "tct", tct)
- _REGISTER_CLOCK(NULL, "tcx", tcx)
- _REGISTER_CLOCK(NULL, "tcz", tcz)
- _REGISTER_CLOCK(NULL, "ref", ref)
- _REGISTER_CLOCK(NULL, "dai0", dai0)
- _REGISTER_CLOCK(NULL, "pic", pic)
- _REGISTER_CLOCK(NULL, "tc", tc)
- _REGISTER_CLOCK(NULL, "gpio", gpio)
- _REGISTER_CLOCK(NULL, "usbd", usbd)
- _REGISTER_CLOCK("tcc-uart.0", NULL, uart0)
- _REGISTER_CLOCK("tcc-uart.2", NULL, uart2)
- _REGISTER_CLOCK("tcc-i2c", NULL, i2c)
- _REGISTER_CLOCK("tcc-uart.3", NULL, uart3)
- _REGISTER_CLOCK(NULL, "ecc", ecc)
- _REGISTER_CLOCK(NULL, "adc", adc)
- _REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0)
- _REGISTER_CLOCK(NULL, "gdma0", gdma0)
- _REGISTER_CLOCK(NULL, "lcd", lcd)
- _REGISTER_CLOCK(NULL, "rtc", rtc)
- _REGISTER_CLOCK(NULL, "nfc", nfc)
- _REGISTER_CLOCK("tcc-mmc.0", NULL, sd0)
- _REGISTER_CLOCK(NULL, "g2d", g2d)
- _REGISTER_CLOCK(NULL, "gdma1", gdma1)
- _REGISTER_CLOCK("tcc-uart.1", NULL, uart1)
- _REGISTER_CLOCK("tcc-spi.0", NULL, spi0)
- _REGISTER_CLOCK(NULL, "mscl", mscl)
- _REGISTER_CLOCK("tcc-spi.1", NULL, spi1)
- _REGISTER_CLOCK(NULL, "bdma", bdma)
- _REGISTER_CLOCK(NULL, "adma0", adma0)
- _REGISTER_CLOCK(NULL, "spdif", spdif)
- _REGISTER_CLOCK(NULL, "scfg", scfg)
- _REGISTER_CLOCK(NULL, "cid", cid)
- _REGISTER_CLOCK("tcc-mmc.1", NULL, sd1)
- _REGISTER_CLOCK("tcc-uart.4", NULL, uart4)
- _REGISTER_CLOCK(NULL, "dai1", dai1)
- _REGISTER_CLOCK(NULL, "adma1", adma1)
- _REGISTER_CLOCK(NULL, "c3dec", c3dec)
- _REGISTER_CLOCK("tcc-can.0", NULL, can0)
- _REGISTER_CLOCK("tcc-can.1", NULL, can1)
- _REGISTER_CLOCK(NULL, "gps", gps)
- _REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0)
- _REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1)
- _REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2)
- _REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3)
- _REGISTER_CLOCK(NULL, "gdma2", gdma2)
- _REGISTER_CLOCK(NULL, "gdma3", gdma3)
- _REGISTER_CLOCK(NULL, "ddrc", ddrc)
- _REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1)
-};
-
-static struct clk *root_clk_by_index(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return &pll0;
- case CLK_SRC_PLL1: return &pll1;
- case CLK_SRC_PLL2: return &pll2;
- case CLK_SRC_PLL0DIV: return &pll0div;
- case CLK_SRC_PLL1DIV: return &pll1div;
- case CLK_SRC_PLL2DIV: return &pll2div;
- case CLK_SRC_XI: return ξ
- case CLK_SRC_XTI: return &xti;
- case CLK_SRC_XIDIV: return &xidiv;
- case CLK_SRC_XTIDIV: return &xtidiv;
- default: return NULL;
- }
-}
-
-static void find_aclk_parent(struct clk *clk)
-{
- unsigned int src;
- struct clk *clock;
-
- if (!clk->aclkreg)
- return;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
-
- clock = root_clk_by_index(src);
- if (!clock)
- return;
-
- clk->parent = clock;
- clk->set_parent = aclk_set_parent;
-}
-
-void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq)
-{
- int i;
-
- xi_rate = xi_freq;
- xti_rate = xti_freq;
-
- /* fixup parents and add the clock */
- for (i = 0; i < ARRAY_SIZE(lookups); i++) {
- find_aclk_parent(lookups[i].clk);
- clkdev_add(&lookups[i]);
- }
- tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32);
-}
diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h
deleted file mode 100644
index 705690a..0000000
--- a/arch/arm/mach-tcc8k/common.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef MACH_TCC8K_COMMON_H
-#define MACH_TCC8K_COMMON_H
-
-#include <linux/platform_device.h>
-
-extern struct platform_device tcc_nand_device;
-
-struct clk;
-
-extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq);
-extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq);
-extern void tcc8k_init_irq(void);
-extern void tcc8k_map_common_io(void);
-
-#endif
diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c
deleted file mode 100644
index 6722ad7..0000000
--- a/arch/arm/mach-tcc8k/devices.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/devices.c
- *
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of GPL v2.
- *
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static u64 tcc8k_dmamask = DMA_BIT_MASK(32);
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND controller */
-static struct resource tcc_nand_resources[] = {
- {
- .start = (resource_size_t)NFC_BASE,
- .end = (resource_size_t)NFC_BASE + 0x7f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = INT_NFC,
- .end = INT_NFC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device tcc_nand_device = {
- .name = "tcc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(tcc_nand_resources),
- .resource = tcc_nand_resources,
-};
-#endif
-
-#ifdef CONFIG_MMC_TCC8K
-/* MMC controller */
-static struct resource tcc8k_mmc0_resource[] = {
- {
- .start = INT_SD0,
- .end = INT_SD0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource tcc8k_mmc1_resource[] = {
- {
- .start = INT_SD1,
- .end = INT_SD1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device tcc8k_mmc0_device = {
- .name = "tcc-mmc",
- .id = 0,
- .num_resources = ARRAY_SIZE(tcc8k_mmc0_resource),
- .resource = tcc8k_mmc0_resource,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-struct platform_device tcc8k_mmc1_device = {
- .name = "tcc-mmc",
- .id = 1,
- .num_resources = ARRAY_SIZE(tcc8k_mmc1_resource),
- .resource = tcc8k_mmc1_resource,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-static inline void tcc8k_init_mmc(void)
-{
- u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
- reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS;
- __raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
- platform_device_register(&tcc8k_mmc0_device);
- platform_device_register(&tcc8k_mmc1_device);
-}
-#else
-static inline void tcc8k_init_mmc(void) { }
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD
-static int tcc8k_ohci_init(struct device *dev)
-{
- u32 reg;
-
- /* Use GPIO PK19 as VBUS control output */
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS);
- reg &= ~(1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS);
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS);
- reg &= ~(1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS);
-
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS);
- reg |= (1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS);
- /* Turn on VBUS */
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS);
- reg |= (1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS);
-
- return 0;
-}
-
-static struct resource tcc8k_ohci0_resources[] = {
- [0] = {
- .start = (resource_size_t)USBH0_BASE,
- .end = (resource_size_t)USBH0_BASE + 0x5c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_USBH0,
- .end = INT_USBH0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource tcc8k_ohci1_resources[] = {
- [0] = {
- .start = (resource_size_t)USBH1_BASE,
- .end = (resource_size_t)USBH1_BASE + 0x5c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_USBH1,
- .end = INT_USBH1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct tccohci_platform_data tcc8k_ohci0_platform_data = {
- .controller = 0,
- .port_mode = PMM_PERPORT_MODE,
- .init = tcc8k_ohci_init,
-};
-
-static struct tccohci_platform_data tcc8k_ohci1_platform_data = {
- .controller = 1,
- .port_mode = PMM_PERPORT_MODE,
- .init = tcc8k_ohci_init,
-};
-
-static struct platform_device ohci0_device = {
- .name = "tcc-ohci",
- .id = 0,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tcc8k_ohci0_platform_data,
- },
- .num_resources = ARRAY_SIZE(tcc8k_ohci0_resources),
- .resource = tcc8k_ohci0_resources,
-};
-
-static struct platform_device ohci1_device = {
- .name = "tcc-ohci",
- .id = 1,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tcc8k_ohci1_platform_data,
- },
- .num_resources = ARRAY_SIZE(tcc8k_ohci1_resources),
- .resource = tcc8k_ohci1_resources,
-};
-
-static void __init tcc8k_init_usbhost(void)
-{
- platform_device_register(&ohci0_device);
- platform_device_register(&ohci1_device);
-}
-#else
-static void __init tcc8k_init_usbhost(void) { }
-#endif
-
-/* USB device controller*/
-#ifdef CONFIG_USB_GADGET_TCC8K
-static struct resource udc_resources[] = {
- [0] = {
- .start = INT_USBD,
- .end = INT_USBD,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = INT_UDMA,
- .end = INT_UDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device tcc8k_udc_device = {
- .name = "tcc-udc",
- .id = 0,
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static void __init tcc8k_init_usb_gadget(void)
-{
- platform_device_register(&tcc8k_udc_device);
-}
-#else
-static void __init tcc8k_init_usb_gadget(void) { }
-#endif /* CONFIG_USB_GADGET_TCC83X */
-
-static int __init tcc8k_init_devices(void)
-{
- tcc8k_init_mmc();
- tcc8k_init_usbhost();
- tcc8k_init_usb_gadget();
- return 0;
-}
-
-arch_initcall(tcc8k_init_devices);
diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c
deleted file mode 100644
index 9b39d7f..0000000
--- a/arch/arm/mach-tcc8k/io.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/io.c
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * derived from TCC83xx io.c
- * Copyright (C) Telechips, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc tcc8k_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)CS1_BASE_VIRT,
- .pfn = __phys_to_pfn(CS1_BASE),
- .length = CS1_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)AHB_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(AHB_PERI_BASE),
- .length = AHB_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)APB0_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(APB0_PERI_BASE),
- .length = APB0_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)APB1_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(APB1_PERI_BASE),
- .length = APB1_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)EXT_MEM_CTRL_BASE_VIRT,
- .pfn = __phys_to_pfn(EXT_MEM_CTRL_BASE),
- .length = EXT_MEM_CTRL_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/*
- * Maps common IO regions for tcc8k.
- *
- */
-void __init tcc8k_map_common_io(void)
-{
- iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc));
-}
diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c
deleted file mode 100644
index 209fa5c..0000000
--- a/arch/arm/mach-tcc8k/irq.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU GPL version 2.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-/* Disable IRQ */
-static void tcc8000_mask_ack_irq0(struct irq_data *d)
-{
- PIC0_IEN &= ~(1 << d->irq);
- PIC0_CREQ |= (1 << d->irq);
-}
-
-static void tcc8000_mask_ack_irq1(struct irq_data *d)
-{
- PIC1_IEN &= ~(1 << (d->irq - 32));
- PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-static void tcc8000_mask_irq0(struct irq_data *d)
-{
- PIC0_IEN &= ~(1 << d->irq);
-}
-
-static void tcc8000_mask_irq1(struct irq_data *d)
-{
- PIC1_IEN &= ~(1 << (d->irq - 32));
-}
-
-static void tcc8000_ack_irq0(struct irq_data *d)
-{
- PIC0_CREQ |= (1 << d->irq);
-}
-
-static void tcc8000_ack_irq1(struct irq_data *d)
-{
- PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-/* Enable IRQ */
-static void tcc8000_unmask_irq0(struct irq_data *d)
-{
- PIC0_IEN |= (1 << d->irq);
- PIC0_INTOEN |= (1 << d->irq);
-}
-
-static void tcc8000_unmask_irq1(struct irq_data *d)
-{
- PIC1_IEN |= (1 << (d->irq - 32));
- PIC1_INTOEN |= (1 << (d->irq - 32));
-}
-
-static struct irq_chip tcc8000_irq_chip0 = {
- .name = "tcc_irq0",
- .irq_mask = tcc8000_mask_irq0,
- .irq_ack = tcc8000_ack_irq0,
- .irq_mask_ack = tcc8000_mask_ack_irq0,
- .irq_unmask = tcc8000_unmask_irq0,
-};
-
-static struct irq_chip tcc8000_irq_chip1 = {
- .name = "tcc_irq1",
- .irq_mask = tcc8000_mask_irq1,
- .irq_ack = tcc8000_ack_irq1,
- .irq_mask_ack = tcc8000_mask_ack_irq1,
- .irq_unmask = tcc8000_unmask_irq1,
-};
-
-void __init tcc8k_init_irq(void)
-{
- int irqno;
-
- /* Mask and clear all interrupts */
- PIC0_IEN = 0x00000000;
- PIC0_CREQ = 0xffffffff;
- PIC1_IEN = 0x00000000;
- PIC1_CREQ = 0xffffffff;
-
- PIC0_MEN0 = 0x00000003;
- PIC1_MEN1 = 0x00000003;
- PIC1_MEN = 0x00000003;
-
- /* let all IRQs be level triggered */
- PIC0_TMODE = 0xffffffff;
- PIC1_TMODE = 0xffffffff;
- /* all IRQs are IRQs (not FIQs) */
- PIC0_IRQSEL = 0xffffffff;
- PIC1_IRQSEL = 0xffffffff;
-
- for (irqno = 0; irqno < NR_IRQS; irqno++) {
- if (irqno < 32)
- irq_set_chip(irqno, &tcc8000_irq_chip0);
- else
- irq_set_chip(irqno, &tcc8000_irq_chip1);
- irq_set_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
deleted file mode 100644
index a96babe..0000000
--- a/arch/arm/mach-tcc8k/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * TCC8000 system timer setup
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL version 2.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static void __iomem *timer_base;
-
-static int tcc_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS);
-
- __raw_writel(reg + evt, timer_base + TC32CMP0_OFFS);
- return 0;
-}
-
-static void tcc_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned long tc32irq;
-
- switch (mode) {
- case CLOCK_EVT_MODE_ONESHOT:
- tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
- tc32irq |= TC32IRQ_IRQEN0;
- __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
- tc32irq &= ~TC32IRQ_IRQEN0;
- __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
- break;
- case CLOCK_EVT_MODE_PERIODIC:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- /* Acknowledge TC32 interrupt by reading TC32IRQ */
- __raw_readl(timer_base + TC32IRQ_OFFS);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct clock_event_device clockevent_tcc = {
- .name = "tcc_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_mode = tcc_set_mode,
- .set_next_event = tcc_set_next_event,
- .rating = 200,
-};
-
-static struct irqaction tcc8k_timer_irq = {
- .name = "TC32_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = tcc8k_timer_interrupt,
- .dev_id = &clockevent_tcc,
-};
-
-static int __init tcc_clockevent_init(struct clk *clock)
-{
- unsigned int c = clk_get_rate(clock);
-
- clocksource_mmio_init(timer_base + TC32MCNT_OFFS, "tcc_tc32", c,
- 200, 32, clocksource_mmio_readl_up);
-
- clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
- clockevent_tcc.shift);
- clockevent_tcc.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_tcc);
- clockevent_tcc.min_delta_ns =
- clockevent_delta2ns(0xff, &clockevent_tcc);
-
- clockevent_tcc.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_tcc);
-
- return 0;
-}
-
-void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq)
-{
- u32 reg;
-
- timer_base = base;
- tcc8k_timer_irq.irq = irq;
-
- /* Enable clocks */
- clk_enable(clock);
-
- /* Initialize 32-bit timer */
- reg = __raw_readl(timer_base + TC32EN_OFFS);
- reg &= ~TC32EN_ENABLE; /* Disable timer */
- __raw_writel(reg, timer_base + TC32EN_OFFS);
- /* Free running timer, counting from 0 to 0xffffffff */
- __raw_writel(0, timer_base + TC32EN_OFFS);
- __raw_writel(0, timer_base + TC32LDV_OFFS);
- reg = __raw_readl(timer_base + TC32IRQ_OFFS);
- reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */
- __raw_writel(reg, timer_base + TC32IRQ_OFFS);
-
- __raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS);
-
- tcc_clockevent_init(clock);
- setup_irq(irq, &tcc8k_timer_irq);
-}
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 74743ad..e417a83 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -32,6 +32,7 @@
#include <linux/i2c.h>
#include <linux/i2c-tegra.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -130,7 +131,9 @@
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_dt_init,
+ .restart = tegra_assert_system_reset,
.dt_compat = tegra_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index f0bdc5e..70ee674 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -31,6 +31,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
#include <asm/setup.h>
#include <mach/tegra_wm8903_pdata.h>
@@ -187,6 +188,8 @@
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_harmony_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 55c55ba..33d6205 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -29,6 +29,7 @@
#include <linux/gpio.h>
#include <linux/rfkill-gpio.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -190,6 +191,8 @@
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_paz00_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index bf13ea3..c1599eb 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -34,6 +34,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include "board.h"
#include "board-seaboard.h"
@@ -284,8 +285,10 @@
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_seaboard_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
MACHINE_START(KAEN, "kaen")
@@ -293,8 +296,10 @@
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_kaen_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
MACHINE_START(WARIO, "wario")
@@ -302,6 +307,8 @@
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_wario_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 1a6617b..c242314 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -26,6 +26,7 @@
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
@@ -176,6 +177,8 @@
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_trimslice_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 690b888..20f396d 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -31,8 +31,6 @@
#include "clock.h"
#include "fuse.h"
-void (*arch_reset)(char mode, const char *cmd) = tegra_assert_system_reset;
-
void tegra_assert_system_reset(char mode, const char *cmd)
{
void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04);
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
index dd165c5..ac11262 100644
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -12,30 +12,15 @@
* GNU General Public License for more details.
*
*/
-#include <mach/iomap.h>
-#include <mach/io.h>
-
-#if defined(CONFIG_ARM_GIC)
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
- /* Uses the GIC interrupt controller built into the cpu */
-#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- movw \base, #(ICTRL_BASE & 0x0000ffff)
- movt \base, #((ICTRL_BASE & 0xffff0000) >> 16)
+ .macro arch_ret_to_user, tmp1, tmp2
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-#else
+#if !defined(CONFIG_ARM_GIC)
/* legacy interrupt controller for AP16 */
- .macro disable_fiq
- .endm
.macro get_irqnr_preamble, base, tmp
@ enable imprecise aborts
@@ -46,9 +31,6 @@
orr \base, #0x0000f000
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #0x20] @ EVT_IRQ_STS
cmp \irqnr, #0x80
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
index 35a011f..f15deff 100644
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -71,12 +71,6 @@
#ifndef __ASSEMBLER__
-#define __arch_ioremap tegra_ioremap
-#define __arch_iounmap tegra_iounmap
-
-void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
-void tegra_iounmap(volatile void __iomem *addr);
-
#define IO_ADDRESS(n) (IO_TO_VIRT(n))
#ifdef CONFIG_TEGRA_PCI
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
index 027c421..a312988 100644
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ b/arch/arm/mach-tegra/include/mach/system.h
@@ -21,10 +21,6 @@
#ifndef __MACH_TEGRA_SYSTEM_H
#define __MACH_TEGRA_SYSTEM_H
-#include <mach/iomap.h>
-
-extern void (*arch_reset)(char mode, const char *cmd);
-
static inline void arch_idle(void)
{
}
diff --git a/arch/arm/mach-tegra/include/mach/vmalloc.h b/arch/arm/mach-tegra/include/mach/vmalloc.h
deleted file mode 100644
index fd6aa65..0000000
--- a/arch/arm/mach-tegra/include/mach/vmalloc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/vmalloc.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_VMALLOC_H
-#define __MACH_TEGRA_VMALLOC_H
-
-#include <asm/sizes.h>
-
-#define VMALLOC_END 0xFE000000UL
-
-#endif
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index 5489f8b..d23ee2d 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -60,24 +60,3 @@
{
iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
}
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *tegra_ioremap(unsigned long p, size_t size, unsigned int type)
-{
- void __iomem *v = IO_ADDRESS(p);
- if (v == NULL)
- v = __arm_ioremap(p, size, type);
- return v;
-}
-EXPORT_SYMBOL(tegra_ioremap);
-
-void tegra_iounmap(volatile void __iomem *addr)
-{
- unsigned long virt = (unsigned long)addr;
-
- if (virt >= VMALLOC_START && virt < VMALLOC_END)
- __iounmap(addr);
-}
-EXPORT_SYMBOL(tegra_iounmap);
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index e2272d2..732c724 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -19,7 +19,6 @@
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/sched.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -106,25 +105,9 @@
.set_mode = tegra_timer_set_mode,
};
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60).
- * This gives a resolution of about 1us and a wrap period of about 1h11min.
- */
-#define SC_MULT 4194304000u
-#define SC_SHIFT 22
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace tegra_read_sched_clock(void)
{
- u32 cyc = timer_readl(TIMERUS_CNTR_1US);
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-static void notrace tegra_update_sched_clock(void)
-{
- u32 cyc = timer_readl(TIMERUS_CNTR_1US);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_readl(TIMERUS_CNTR_1US);
}
/*
@@ -218,8 +201,7 @@
WARN(1, "Unknown clock rate");
}
- init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32,
- 1000000, SC_MULT, SC_SHIFT);
+ setup_sched_clock(tegra_read_sched_clock, 32, 1000000);
if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index ac0791e..6979307 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1888,3 +1888,23 @@
return mmc_init(&mmcsd_device);
}
module_init(core_module_init);
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+void u300_restart(char mode, const char *cmd)
+{
+ switch (mode) {
+ case 's':
+ case 'h':
+#ifdef CONFIG_COH901327_WATCHDOG
+ coh901327_watchdog_reset();
+#endif
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ /* Wait for system do die/reset. */
+ while (1);
+}
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
index 20731ae..7181d6a 100644
--- a/arch/arm/mach-u300/include/mach/entry-macro.S
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -8,33 +8,9 @@
* Low-level IRQ helper macros for ST-Ericsson U300
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
-#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #0
- teq \irqstat, #0
- bne 1002f
-1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #32
- teq \irqstat, #0
- beq 1003f
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
- .endm
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
index 77d9210..096333f 100644
--- a/arch/arm/mach-u300/include/mach/platform.h
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -14,6 +14,7 @@
void u300_map_io(void);
void u300_init_irq(void);
void u300_init_devices(void);
+void u300_restart(char, const char *);
extern struct sys_timer u300_timer;
#endif
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
index 8daf136..574d46e 100644
--- a/arch/arm/mach-u300/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -8,35 +8,7 @@
* System shutdown and reset functions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-
-/* Forward declare this function from the watchdog */
-void coh901327_watchdog_reset(void);
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static void arch_reset(char mode, const char *cmd)
-{
- switch (mode) {
- case 's':
- case 'h':
- printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
- /* Disable interrupts */
- local_irq_disable();
-#ifdef CONFIG_COH901327_WATCHDOG
- coh901327_watchdog_reset();
-#endif
- break;
- default:
- /* Do nothing */
- break;
- }
- /* Wait for system do die/reset. */
- while (1);
-}
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
deleted file mode 100644
index ec423b9..0000000
--- a/arch/arm/mach-u300/include/mach/vmalloc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/vmalloc.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Virtual memory allocations
- * End must be above the I/O registers and on an even 2MiB boundary.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#define VMALLOC_END 0xfe800000UL
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 5f51bde..bc1c789 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -9,7 +9,6 @@
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/interrupt.h>
-#include <linux/sched.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/clockchips.h>
@@ -337,18 +336,10 @@
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by OMAP implementation.)
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace u300_read_sched_clock(void)
{
- u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace u300_update_sched_clock(void)
-{
- u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
}
@@ -366,7 +357,7 @@
clk_enable(clk);
rate = clk_get_rate(clk);
- init_sched_clock(&cd, u300_update_sched_clock, 32, rate);
+ setup_sched_clock(u300_read_sched_clock, 32, rate);
/*
* Disable the "OS" and "DD" timers - these are designed for Symbian!
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 89422ee..def45bd 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/memory.h>
@@ -49,6 +50,8 @@
.atag_offset = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
.init_irq = u300_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &u300_timer,
.init_machine = u300_init_machine,
+ .restart = u300_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bdd7b80..de1f5f8 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -33,6 +33,7 @@
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
@@ -695,6 +696,7 @@
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = mop500_init_machine,
MACHINE_END
@@ -703,6 +705,7 @@
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = hrefv60_init_machine,
MACHINE_END
@@ -712,5 +715,6 @@
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = snowball_init_machine,
MACHINE_END
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 82025ba..fe1569b 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -12,6 +12,7 @@
#include <linux/i2c.h>
#include <linux/mfd/ab5500/ab5500.h>
+#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -149,5 +150,6 @@
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = u5500_init_machine,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 9de1af0..5323286 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -30,12 +30,11 @@
};
static struct map_desc u5500_io_desc[] __initdata = {
- __IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K),
+ /* SCU base also covers GIC CPU BASE and TWD with its 4K page */
+ __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 13e8890..7f2729c 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -35,12 +35,11 @@
};
static struct map_desc u8500_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+ /* SCU base also covers GIC CPU BASE and TWD with its 4K page */
+ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index 071bba9..e16299e 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -10,8 +10,6 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index 7389df9..c01ef66 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -1,10 +1,5 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-/*
- * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough
- * room for a couple of GPIO expanders.
- */
-#define ARCH_NR_GPIOS 350
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
index c0cd800..258e5c9 100644
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -17,9 +17,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* yet to be implemented - TODO */
-}
-
#endif
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
deleted file mode 100644
index a4945cb..0000000
--- a/arch/arm/mach-ux500/include/mach/vmalloc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index e340a54..02b7b93 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -22,7 +22,6 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
@@ -141,11 +140,6 @@
},
#ifdef CONFIG_MACH_VERSATILE_AB
{
- .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE),
- .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
.pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
.length = SZ_64M,
@@ -745,6 +739,19 @@
}
#endif /* CONFIG_LEDS */
+void versatile_restart(char mode, const char *cmd)
+{
+ void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
+ u32 val;
+
+ val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
+ val |= 0x105;
+
+ __raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
+ __raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
+ __raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
+}
+
/* Early initializations */
void __init versatile_init_early(void)
{
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index e014227..2ef2f55 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -30,6 +30,7 @@
extern void __init versatile_init_irq(void);
extern void __init versatile_map_io(void);
extern struct sys_timer versatile_timer;
+extern void versatile_restart(char, const char *);
extern unsigned int mmc_status(struct device *dev);
#ifdef CONFIG_OF
extern struct of_dev_auxdata versatile_auxdata_lookup[];
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
index e6f7c16..b6f0dbf 100644
--- a/arch/arm/mach-versatile/include/mach/entry-macro.S
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -7,39 +7,9 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #0
- teq \irqstat, #0
- beq 1003f
-
-1001: tst \irqstat, #15
- bne 1002f
- add \irqnr, \irqnr, #4
- movs \irqstat, \irqstat, lsr #4
- bne 1001b
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
-
-@ clz \irqnr, \irqstat
-@1003: /* EQ will be set if we reach MAXIRQNUM */
- .endm
-
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
index 8ffc12a..f3fa347 100644
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -21,10 +21,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
static inline void arch_idle(void)
{
/*
@@ -34,16 +30,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- u32 val;
-
- val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
- val |= 0x105;
-
- __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
- __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
- __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
-}
-
#endif
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
deleted file mode 100644
index 7d8e069..0000000
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/vmalloc.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd8000000UL
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index fda4866..98f6549 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -21,12 +21,12 @@
#include <linux/init.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,6 +39,8 @@
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &versatile_timer,
.init_machine = versatile_init,
+ .restart = versatile_restart,
MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 54e037c..ae5ad3c 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -45,7 +46,9 @@
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &versatile_timer,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
+ .restart = versatile_restart,
MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index feaf9cb..9581c19 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -21,13 +21,13 @@
#include <linux/init.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -107,6 +107,8 @@
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &versatile_timer,
.init_machine = versatile_pb_init,
+ .restart = versatile_restart,
MACHINE_END
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9311484..9b3d0fb 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,5 +8,7 @@
select ARM_ERRATA_720789
select ARM_ERRATA_751472
select ARM_ERRATA_753970
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
endmenu
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
index 73c11297..a14f9e6 100644
--- a/arch/arm/mach-vexpress/include/mach/entry-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S
@@ -1,5 +1,3 @@
-#include <asm/hardware/entry-macro-gic.S>
-
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
index 899a4e6..f653a8e 100644
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ b/arch/arm/mach-vexpress/include/mach/system.h
@@ -30,8 +30,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
-}
-
#endif
diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h
deleted file mode 100644
index f43a36e..0000000
--- a/arch/arm/mach-vexpress/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/vmalloc.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xf8000000UL
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 1fafc32..b4a28ca 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -10,7 +10,7 @@
#include <linux/ata_platform.h>
#include <linux/smsc911x.h>
#include <linux/spinlock.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/usb/isp1760.h>
#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
@@ -23,6 +23,7 @@
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/sp810.h>
+#include <asm/hardware/gic.h>
#include <mach/ct-ca9x4.h>
#include <mach/motherboard.h>
@@ -437,7 +438,6 @@
amba_device_register(v2m_amba_devs[i], &iomem_resource);
pm_power_off = v2m_power_off;
- arm_pm_restart = v2m_restart;
ct_desc->init_tile();
}
@@ -448,5 +448,7 @@
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
.timer = &v2m_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = v2m_init,
+ .restart = v2m_restart,
MACHINE_END
diff --git a/arch/arm/mach-vt8500/include/mach/vmalloc.h b/arch/arm/mach-vt8500/include/mach/vmalloc.h
deleted file mode 100644
index 4642290..0000000
--- a/arch/arm/mach-vt8500/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 0a235e5..604e1db 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -33,9 +33,11 @@
#include <mach/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-ebi.h>
+#include <mach/regs-timer.h>
#include "cpu.h"
#include "clock.h"
+#include "nuc9xx.h"
/* Initial IO mappings */
@@ -222,3 +224,17 @@
clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
}
+#define WTCR (TMR_BA + 0x1C)
+#define WTCLK (1 << 10)
+#define WTE (1 << 7)
+#define WTRE (1 << 1)
+
+void nuc9xx_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ __raw_writel(WTE | WTRE | WTCLK, WTCR);
+ }
+}
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index ce228bd..2aaeb93 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -14,28 +14,6 @@
* (at your option) any later version.
*
*/
-
-#include <linux/io.h>
-#include <asm/proc-fns.h>
-#include <mach/map.h>
-#include <mach/regs-timer.h>
-
-#define WTCR (TMR_BA + 0x1C)
-#define WTCLK (1 << 10)
-#define WTE (1 << 7)
-#define WTRE (1 << 1)
-
static void arch_idle(void)
{
}
-
-static void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- /* Jump into ROM at address 0 */
- cpu_reset(0);
- } else {
- __raw_writel(WTE | WTRE | WTCLK, WTCR);
- }
-}
-
diff --git a/arch/arm/mach-w90x900/include/mach/vmalloc.h b/arch/arm/mach-w90x900/include/mach/vmalloc.h
deleted file mode 100644
index b067e44..0000000
--- a/arch/arm/mach-w90x900/include/mach/vmalloc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/vmalloc.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (0xe0000000UL)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 7bf143c..d66d43a 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -19,7 +19,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/ptrace.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -28,6 +28,8 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
+#include "nuc9xx.h"
+
struct group_irq {
unsigned long gpen;
unsigned int enabled;
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 31c1090..b4243e4 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -38,4 +38,5 @@
.init_irq = nuc900_init_irq,
.init_machine = nuc910evb_init,
.timer = &nuc900_timer,
+ .restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 4062e55..067d8f9 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -41,4 +41,5 @@
.init_irq = nuc900_init_irq,
.init_machine = nuc950evb_init,
.timer = &nuc900_timer,
+ .restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index 0ab9995..cbb3adc3 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -38,4 +38,5 @@
.init_irq = nuc900_init_irq,
.init_machine = nuc960evb_init,
.timer = &nuc900_timer,
+ .restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
index 83e9ba5..b14c71a 100644
--- a/arch/arm/mach-w90x900/nuc910.h
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -12,14 +12,7 @@
* published by the Free Software Foundation.
*
*/
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
/* extern file from nuc910.c */
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
index 98a1148..6e9de30 100644
--- a/arch/arm/mach-w90x900/nuc950.h
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -12,14 +12,7 @@
* published by the Free Software Foundation.
*
*/
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
/* extern file from nuc950.c */
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
index f0c07cb..9f6df9a 100644
--- a/arch/arm/mach-w90x900/nuc960.h
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -12,14 +12,7 @@
* published by the Free Software Foundation.
*
*/
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
/* extern file from nuc960.c */
diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h
new file mode 100644
index 0000000..91acb40
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc9xx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-w90x900/nuc9xx.h
+ *
+ * Copied from nuc910.h, which had:
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+extern void nuc9xx_restart(char, const char *);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index a2c4e2d..fa27c49 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -33,6 +33,8 @@
#include <mach/map.h>
#include <mach/regs-timer.h>
+#include "nuc9xx.h"
+
#define RESETINT 0x1f
#define PERIOD (0x01 << 27)
#define ONESHOT (0x00 << 27)
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 73e9368..ab5cfdd 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -112,6 +112,7 @@
MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
.map_io = xilinx_map_io,
.init_irq = xilinx_irq_init,
+ .handle_irq = gic_handle_irq,
.init_machine = xilinx_init_machine,
.timer = &xttcpss_sys_timer,
.dt_compat = xilinx_dt_match,
diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S
index 3cfc01b..d621fb7 100644
--- a/arch/arm/mach-zynq/include/mach/entry-macro.S
+++ b/arch/arm/mach-zynq/include/mach/entry-macro.S
@@ -20,9 +20,6 @@
* GNU General Public License for more details.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
-
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
index 1b84d70..8e88e0b 100644
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ b/arch/arm/mach-zynq/include/mach/system.h
@@ -20,9 +20,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* Add architecture specific reset processing here */
-}
-
#endif
diff --git a/arch/arm/mach-zynq/include/mach/vmalloc.h b/arch/arm/mach-zynq/include/mach/vmalloc.h
deleted file mode 100644
index 2398eff..0000000
--- a/arch/arm/mach-zynq/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/vmalloc.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_VMALLOC_H__
-#define __MACH_VMALLOC_H__
-
-#define VMALLOC_END 0xE0000000UL
-
-#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0..4cefb57 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -629,6 +629,23 @@
comment "Processor Features"
+config ARM_LPAE
+ bool "Support for the Large Physical Address Extension"
+ depends on MMU && CPU_V7
+ help
+ Say Y if you have an ARMv7 processor supporting the LPAE page
+ table format and you would like to access memory beyond the
+ 4GB limit. The resulting kernel image will not run on
+ processors without the LPA extension.
+
+ If unsure, say N.
+
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool ARM_LPAE
+
+config ARCH_DMA_ADDR_T_64BIT
+ bool
+
config ARM_THUMB
bool "Support Thumb user binaries"
depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
@@ -816,14 +833,23 @@
Say Y here to use the Feroceon L2 cache in writethrough mode.
Unless you specifically require this, say N for writeback mode.
+config MIGHT_HAVE_CACHE_L2X0
+ bool
+ help
+ This option should be selected by machines which have a L2x0
+ or PL310 cache controller, but where its use is optional.
+
+ The only effect of this option is to make CACHE_L2X0 and
+ related options available to the user for configuration.
+
+ Boards or SoCs which always require the cache controller
+ support to be present should select CACHE_L2X0 directly
+ instead of this option, thus preventing the user from
+ inadvertently configuring a broken kernel.
+
config CACHE_L2X0
- bool "Enable the L2x0 outer cache controller"
- depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
- ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
- default y
+ bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
+ default MIGHT_HAVE_CACHE_L2X0
select OUTER_CACHE
select OUTER_CACHE_SYNC
help
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index c335c76..caf14dc 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -968,7 +968,7 @@
ai_usermode = safe_usermode(ai_usermode, false);
}
- hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+ hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN,
"alignment exception");
/*
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 8ac9e9f..b1e192b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -61,7 +61,7 @@
{
void __iomem *base = l2x0_base;
-#ifdef CONFIG_ARM_ERRATA_753970
+#ifdef CONFIG_PL310_ERRATA_753970
/* write to an unmmapped register */
writel_relaxed(0, base + L2X0_DUMMY_REG);
#else
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 93aac06..ee9bb36 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -22,6 +22,21 @@
DEFINE_PER_CPU(struct mm_struct *, current_mm);
#endif
+#ifdef CONFIG_ARM_LPAE
+#define cpu_set_asid(asid) { \
+ unsigned long ttbl, ttbh; \
+ asm volatile( \
+ " mrrc p15, 0, %0, %1, c2 @ read TTBR0\n" \
+ " mov %1, %2, lsl #(48 - 32) @ set ASID\n" \
+ " mcrr p15, 0, %0, %1, c2 @ set TTBR0\n" \
+ : "=&r" (ttbl), "=&r" (ttbh) \
+ : "r" (asid & ~ASID_MASK)); \
+}
+#else
+#define cpu_set_asid(asid) \
+ asm(" mcr p15, 0, %0, c13, c0, 1\n" : : "r" (asid))
+#endif
+
/*
* We fork()ed a process, and we need a new context for the child
* to run in. We reserve version 0 for initial tasks so we will
@@ -37,7 +52,7 @@
static void flush_context(void)
{
/* set the reserved ASID before flushing the TLB */
- asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
+ cpu_set_asid(0);
isb();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
@@ -99,7 +114,7 @@
set_mm_context(mm, asid);
/* set the new ASID */
- asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (mm->context.id));
+ cpu_set_asid(mm->context.id);
isb();
}
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e4e7f6c..1aa664a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -168,7 +168,7 @@
pte_t *pte;
int i = 0;
unsigned long base = consistent_base;
- unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+ unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
if (!consistent_pte) {
@@ -332,6 +332,15 @@
struct page *page;
void *addr;
+ /*
+ * Following is a work-around (a.k.a. hack) to prevent pages
+ * with __GFP_COMP being passed to split_page() which cannot
+ * handle them. The real problem is that this flag probably
+ * should be 0 on ARM as it is not supported on this
+ * platform; see CONFIG_HUGETLBFS.
+ */
+ gfp &= ~(__GFP_COMP);
+
*handle = ~0;
size = PAGE_ALIGN(size);
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index aa33949..bb7eac3 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -27,19 +27,6 @@
#include "fault.h"
-/*
- * Fault status register encodings. We steal bit 31 for our own purposes.
- */
-#define FSR_LNX_PF (1 << 31)
-#define FSR_WRITE (1 << 11)
-#define FSR_FS4 (1 << 10)
-#define FSR_FS3_0 (15)
-
-static inline int fsr_fs(unsigned int fsr)
-{
- return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
-}
-
#ifdef CONFIG_MMU
#ifdef CONFIG_KPROBES
@@ -123,8 +110,10 @@
pte = pte_offset_map(pmd, addr);
printk(", *pte=%08llx", (long long)pte_val(*pte));
+#ifndef CONFIG_ARM_LPAE
printk(", *ppte=%08llx",
(long long)pte_val(pte[PTE_HWTABLE_PTRS]));
+#endif
pte_unmap(pte);
} while(0);
@@ -231,7 +220,7 @@
static int __kprobes
__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
- struct task_struct *tsk)
+ unsigned int flags, struct task_struct *tsk)
{
struct vm_area_struct *vma;
int fault;
@@ -253,18 +242,7 @@
goto out;
}
- /*
- * If for any reason at all we couldn't handle the fault, make
- * sure we exit gracefully rather than endlessly redo the fault.
- */
- fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
- if (unlikely(fault & VM_FAULT_ERROR))
- return fault;
- if (fault & VM_FAULT_MAJOR)
- tsk->maj_flt++;
- else
- tsk->min_flt++;
- return fault;
+ return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
check_stack:
if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
@@ -279,6 +257,9 @@
struct task_struct *tsk;
struct mm_struct *mm;
int fault, sig, code;
+ int write = fsr & FSR_WRITE;
+ unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+ (write ? FAULT_FLAG_WRITE : 0);
if (notify_page_fault(regs, fsr))
return 0;
@@ -305,6 +286,7 @@
if (!down_read_trylock(&mm->mmap_sem)) {
if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
goto no_context;
+retry:
down_read(&mm->mmap_sem);
} else {
/*
@@ -320,14 +302,41 @@
#endif
}
- fault = __do_page_fault(mm, addr, fsr, tsk);
- up_read(&mm->mmap_sem);
+ fault = __do_page_fault(mm, addr, fsr, flags, tsk);
+
+ /* If we need to retry but a fatal signal is pending, handle the
+ * signal first. We do not need to release the mmap_sem because
+ * it would already be released in __lock_page_or_retry in
+ * mm/filemap.c. */
+ if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+ return 0;
+
+ /*
+ * Major/minor page fault accounting is only done on the
+ * initial attempt. If we go through a retry, it is extremely
+ * likely that the page will be found in page cache at that point.
+ */
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
- if (fault & VM_FAULT_MAJOR)
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, addr);
- else if (fault & VM_FAULT_MINOR)
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, addr);
+ if (flags & FAULT_FLAG_ALLOW_RETRY) {
+ if (fault & VM_FAULT_MAJOR) {
+ tsk->maj_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+ regs, addr);
+ } else {
+ tsk->min_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+ regs, addr);
+ }
+ if (fault & VM_FAULT_RETRY) {
+ /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
+ * of starvation. */
+ flags &= ~FAULT_FLAG_ALLOW_RETRY;
+ goto retry;
+ }
+ }
+
+ up_read(&mm->mmap_sem);
/*
* Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
@@ -441,6 +450,12 @@
pmd = pmd_offset(pud, addr);
pmd_k = pmd_offset(pud_k, addr);
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Only one hardware entry per PMD with LPAE.
+ */
+ index = 0;
+#else
/*
* On ARM one Linux PGD entry contains two hardware entries (see page
* tables layout in pgtable.h). We normally guarantee that we always
@@ -450,6 +465,7 @@
* for the first of pair.
*/
index = (addr >> SECTION_SHIFT) & 1;
+#endif
if (pmd_none(pmd_k[index]))
goto bad_area;
@@ -489,55 +505,20 @@
return 1;
}
-static struct fsr_info {
+struct fsr_info {
int (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
int sig;
int code;
const char *name;
-} fsr_info[] = {
- /*
- * The following are the standard ARMv3 and ARMv4 aborts. ARMv5
- * defines these to be "precise" aborts.
- */
- { do_bad, SIGSEGV, 0, "vector exception" },
- { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
- { do_bad, SIGKILL, 0, "terminal exception" },
- { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
- { do_bad, SIGBUS, 0, "external abort on linefetch" },
- { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
- { do_bad, SIGBUS, 0, "external abort on linefetch" },
- { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
- { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
- { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
- { do_bad, SIGBUS, 0, "external abort on translation" },
- { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
- { do_bad, SIGBUS, 0, "external abort on translation" },
- { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
- /*
- * The following are "imprecise" aborts, which are signalled by bit
- * 10 of the FSR, and may not be recoverable. These are only
- * supported if the CPU abort handler supports bit 10.
- */
- { do_bad, SIGBUS, 0, "unknown 16" },
- { do_bad, SIGBUS, 0, "unknown 17" },
- { do_bad, SIGBUS, 0, "unknown 18" },
- { do_bad, SIGBUS, 0, "unknown 19" },
- { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */
- { do_bad, SIGBUS, 0, "unknown 21" },
- { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */
- { do_bad, SIGBUS, 0, "unknown 23" },
- { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */
- { do_bad, SIGBUS, 0, "unknown 25" },
- { do_bad, SIGBUS, 0, "unknown 26" },
- { do_bad, SIGBUS, 0, "unknown 27" },
- { do_bad, SIGBUS, 0, "unknown 28" },
- { do_bad, SIGBUS, 0, "unknown 29" },
- { do_bad, SIGBUS, 0, "unknown 30" },
- { do_bad, SIGBUS, 0, "unknown 31" }
};
+/* FSR definition */
+#ifdef CONFIG_ARM_LPAE
+#include "fsr-3level.c"
+#else
+#include "fsr-2level.c"
+#endif
+
void __init
hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
int sig, int code, const char *name)
@@ -573,42 +554,6 @@
arm_notify_die("", regs, &info, fsr, 0);
}
-
-static struct fsr_info ifsr_info[] = {
- { do_bad, SIGBUS, 0, "unknown 0" },
- { do_bad, SIGBUS, 0, "unknown 1" },
- { do_bad, SIGBUS, 0, "debug event" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" },
- { do_bad, SIGBUS, 0, "unknown 4" },
- { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" },
- { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
- { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
- { do_bad, SIGBUS, 0, "unknown 10" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
- { do_bad, SIGBUS, 0, "external abort on translation" },
- { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
- { do_bad, SIGBUS, 0, "external abort on translation" },
- { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
- { do_bad, SIGBUS, 0, "unknown 16" },
- { do_bad, SIGBUS, 0, "unknown 17" },
- { do_bad, SIGBUS, 0, "unknown 18" },
- { do_bad, SIGBUS, 0, "unknown 19" },
- { do_bad, SIGBUS, 0, "unknown 20" },
- { do_bad, SIGBUS, 0, "unknown 21" },
- { do_bad, SIGBUS, 0, "unknown 22" },
- { do_bad, SIGBUS, 0, "unknown 23" },
- { do_bad, SIGBUS, 0, "unknown 24" },
- { do_bad, SIGBUS, 0, "unknown 25" },
- { do_bad, SIGBUS, 0, "unknown 26" },
- { do_bad, SIGBUS, 0, "unknown 27" },
- { do_bad, SIGBUS, 0, "unknown 28" },
- { do_bad, SIGBUS, 0, "unknown 29" },
- { do_bad, SIGBUS, 0, "unknown 30" },
- { do_bad, SIGBUS, 0, "unknown 31" },
-};
-
void __init
hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
int sig, int code, const char *name)
@@ -641,6 +586,7 @@
arm_notify_die("", regs, &info, ifsr, 0);
}
+#ifndef CONFIG_ARM_LPAE
static int __init exceptions_init(void)
{
if (cpu_architecture() >= CPU_ARCH_ARMv6) {
@@ -663,3 +609,4 @@
}
arch_initcall(exceptions_init);
+#endif
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 49e9e38..cf08bdf 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -1,3 +1,28 @@
-void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+#ifndef __ARCH_ARM_FAULT_H
+#define __ARCH_ARM_FAULT_H
+/*
+ * Fault status register encodings. We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF (1 << 31)
+#define FSR_WRITE (1 << 11)
+#define FSR_FS4 (1 << 10)
+#define FSR_FS3_0 (15)
+#define FSR_FS5_0 (0x3f)
+
+#ifdef CONFIG_ARM_LPAE
+static inline int fsr_fs(unsigned int fsr)
+{
+ return fsr & FSR_FS5_0;
+}
+#else
+static inline int fsr_fs(unsigned int fsr)
+{
+ return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+#endif
+
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
unsigned long search_exception_table(unsigned long addr);
+
+#endif /* __ARCH_ARM_FAULT_H */
diff --git a/arch/arm/mm/fsr-2level.c b/arch/arm/mm/fsr-2level.c
new file mode 100644
index 0000000..18ca74c
--- /dev/null
+++ b/arch/arm/mm/fsr-2level.c
@@ -0,0 +1,78 @@
+static struct fsr_info fsr_info[] = {
+ /*
+ * The following are the standard ARMv3 and ARMv4 aborts. ARMv5
+ * defines these to be "precise" aborts.
+ */
+ { do_bad, SIGSEGV, 0, "vector exception" },
+ { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
+ { do_bad, SIGKILL, 0, "terminal exception" },
+ { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
+ { do_bad, SIGBUS, 0, "external abort on linefetch" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
+ { do_bad, SIGBUS, 0, "external abort on linefetch" },
+ { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
+ { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
+ { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
+ /*
+ * The following are "imprecise" aborts, which are signalled by bit
+ * 10 of the FSR, and may not be recoverable. These are only
+ * supported if the CPU abort handler supports bit 10.
+ */
+ { do_bad, SIGBUS, 0, "unknown 16" },
+ { do_bad, SIGBUS, 0, "unknown 17" },
+ { do_bad, SIGBUS, 0, "unknown 18" },
+ { do_bad, SIGBUS, 0, "unknown 19" },
+ { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */
+ { do_bad, SIGBUS, 0, "unknown 21" },
+ { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */
+ { do_bad, SIGBUS, 0, "unknown 23" },
+ { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */
+ { do_bad, SIGBUS, 0, "unknown 25" },
+ { do_bad, SIGBUS, 0, "unknown 26" },
+ { do_bad, SIGBUS, 0, "unknown 27" },
+ { do_bad, SIGBUS, 0, "unknown 28" },
+ { do_bad, SIGBUS, 0, "unknown 29" },
+ { do_bad, SIGBUS, 0, "unknown 30" },
+ { do_bad, SIGBUS, 0, "unknown 31" },
+};
+
+static struct fsr_info ifsr_info[] = {
+ { do_bad, SIGBUS, 0, "unknown 0" },
+ { do_bad, SIGBUS, 0, "unknown 1" },
+ { do_bad, SIGBUS, 0, "debug event" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" },
+ { do_bad, SIGBUS, 0, "unknown 4" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" },
+ { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
+ { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
+ { do_bad, SIGBUS, 0, "unknown 10" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
+ { do_bad, SIGBUS, 0, "unknown 16" },
+ { do_bad, SIGBUS, 0, "unknown 17" },
+ { do_bad, SIGBUS, 0, "unknown 18" },
+ { do_bad, SIGBUS, 0, "unknown 19" },
+ { do_bad, SIGBUS, 0, "unknown 20" },
+ { do_bad, SIGBUS, 0, "unknown 21" },
+ { do_bad, SIGBUS, 0, "unknown 22" },
+ { do_bad, SIGBUS, 0, "unknown 23" },
+ { do_bad, SIGBUS, 0, "unknown 24" },
+ { do_bad, SIGBUS, 0, "unknown 25" },
+ { do_bad, SIGBUS, 0, "unknown 26" },
+ { do_bad, SIGBUS, 0, "unknown 27" },
+ { do_bad, SIGBUS, 0, "unknown 28" },
+ { do_bad, SIGBUS, 0, "unknown 29" },
+ { do_bad, SIGBUS, 0, "unknown 30" },
+ { do_bad, SIGBUS, 0, "unknown 31" },
+};
diff --git a/arch/arm/mm/fsr-3level.c b/arch/arm/mm/fsr-3level.c
new file mode 100644
index 0000000..05a4e94
--- /dev/null
+++ b/arch/arm/mm/fsr-3level.c
@@ -0,0 +1,68 @@
+static struct fsr_info fsr_info[] = {
+ { do_bad, SIGBUS, 0, "unknown 0" },
+ { do_bad, SIGBUS, 0, "unknown 1" },
+ { do_bad, SIGBUS, 0, "unknown 2" },
+ { do_bad, SIGBUS, 0, "unknown 3" },
+ { do_bad, SIGBUS, 0, "reserved translation fault" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 1 translation fault" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 2 translation fault" },
+ { do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" },
+ { do_bad, SIGBUS, 0, "reserved access flag fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" },
+ { do_bad, SIGBUS, 0, "reserved permission fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" },
+ { do_sect_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 permission fault" },
+ { do_bad, SIGBUS, 0, "synchronous external abort" },
+ { do_bad, SIGBUS, 0, "asynchronous external abort" },
+ { do_bad, SIGBUS, 0, "unknown 18" },
+ { do_bad, SIGBUS, 0, "unknown 19" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous parity error" },
+ { do_bad, SIGBUS, 0, "asynchronous parity error" },
+ { do_bad, SIGBUS, 0, "unknown 26" },
+ { do_bad, SIGBUS, 0, "unknown 27" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "unknown 32" },
+ { do_bad, SIGBUS, BUS_ADRALN, "alignment fault" },
+ { do_bad, SIGBUS, 0, "debug event" },
+ { do_bad, SIGBUS, 0, "unknown 35" },
+ { do_bad, SIGBUS, 0, "unknown 36" },
+ { do_bad, SIGBUS, 0, "unknown 37" },
+ { do_bad, SIGBUS, 0, "unknown 38" },
+ { do_bad, SIGBUS, 0, "unknown 39" },
+ { do_bad, SIGBUS, 0, "unknown 40" },
+ { do_bad, SIGBUS, 0, "unknown 41" },
+ { do_bad, SIGBUS, 0, "unknown 42" },
+ { do_bad, SIGBUS, 0, "unknown 43" },
+ { do_bad, SIGBUS, 0, "unknown 44" },
+ { do_bad, SIGBUS, 0, "unknown 45" },
+ { do_bad, SIGBUS, 0, "unknown 46" },
+ { do_bad, SIGBUS, 0, "unknown 47" },
+ { do_bad, SIGBUS, 0, "unknown 48" },
+ { do_bad, SIGBUS, 0, "unknown 49" },
+ { do_bad, SIGBUS, 0, "unknown 50" },
+ { do_bad, SIGBUS, 0, "unknown 51" },
+ { do_bad, SIGBUS, 0, "implementation fault (lockdown abort)" },
+ { do_bad, SIGBUS, 0, "unknown 53" },
+ { do_bad, SIGBUS, 0, "unknown 54" },
+ { do_bad, SIGBUS, 0, "unknown 55" },
+ { do_bad, SIGBUS, 0, "unknown 56" },
+ { do_bad, SIGBUS, 0, "unknown 57" },
+ { do_bad, SIGBUS, 0, "implementation fault (coprocessor abort)" },
+ { do_bad, SIGBUS, 0, "unknown 59" },
+ { do_bad, SIGBUS, 0, "unknown 60" },
+ { do_bad, SIGBUS, 0, "unknown 61" },
+ { do_bad, SIGBUS, 0, "unknown 62" },
+ { do_bad, SIGBUS, 0, "unknown 63" },
+};
+
+#define ifsr_info fsr_info
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index 2be9139..feacf4c 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -1,9 +1,38 @@
#include <linux/kernel.h>
#include <asm/cputype.h>
+#include <asm/idmap.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
+pgd_t *idmap_pgd;
+
+#ifdef CONFIG_ARM_LPAE
+static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
+ unsigned long prot)
+{
+ pmd_t *pmd;
+ unsigned long next;
+
+ if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) {
+ pmd = pmd_alloc_one(&init_mm, addr);
+ if (!pmd) {
+ pr_warning("Failed to allocate identity pmd.\n");
+ return;
+ }
+ pud_populate(&init_mm, pud, pmd);
+ pmd += pmd_index(addr);
+ } else
+ pmd = pmd_offset(pud, addr);
+
+ do {
+ next = pmd_addr_end(addr, end);
+ *pmd = __pmd((addr & PMD_MASK) | prot);
+ flush_pmd_entry(pmd);
+ } while (pmd++, addr = next, addr != end);
+}
+#else /* !CONFIG_ARM_LPAE */
static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
unsigned long prot)
{
@@ -15,6 +44,7 @@
pmd[1] = __pmd(addr);
flush_pmd_entry(pmd);
}
+#endif /* CONFIG_ARM_LPAE */
static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
unsigned long prot)
@@ -28,11 +58,11 @@
} while (pud++, addr = next, addr != end);
}
-void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
+static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
{
unsigned long prot, next;
- prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
+ prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
prot |= PMD_BIT4;
@@ -43,48 +73,41 @@
} while (pgd++, addr = next, addr != end);
}
-#ifdef CONFIG_SMP
-static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end)
+extern char __idmap_text_start[], __idmap_text_end[];
+
+static int __init init_static_idmap(void)
{
- pmd_t *pmd = pmd_offset(pud, addr);
- pmd_clear(pmd);
+ phys_addr_t idmap_start, idmap_end;
+
+ idmap_pgd = pgd_alloc(&init_mm);
+ if (!idmap_pgd)
+ return -ENOMEM;
+
+ /* Add an identity mapping for the physical address of the section. */
+ idmap_start = virt_to_phys((void *)__idmap_text_start);
+ idmap_end = virt_to_phys((void *)__idmap_text_end);
+
+ pr_info("Setting up static identity map for 0x%llx - 0x%llx\n",
+ (long long)idmap_start, (long long)idmap_end);
+ identity_mapping_add(idmap_pgd, idmap_start, idmap_end);
+
+ return 0;
}
-
-static void idmap_del_pud(pgd_t *pgd, unsigned long addr, unsigned long end)
-{
- pud_t *pud = pud_offset(pgd, addr);
- unsigned long next;
-
- do {
- next = pud_addr_end(addr, end);
- idmap_del_pmd(pud, addr, next);
- } while (pud++, addr = next, addr != end);
-}
-
-void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end)
-{
- unsigned long next;
-
- pgd += pgd_index(addr);
- do {
- next = pgd_addr_end(addr, end);
- idmap_del_pud(pgd, addr, next);
- } while (pgd++, addr = next, addr != end);
-}
-#endif
+early_initcall(init_static_idmap);
/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages. This will then ensure that we have predictable
- * results when turning the mmu off
+ * In order to soft-boot, we need to switch to a 1:1 mapping for the
+ * cpu_reset functions. This will then ensure that we have predictable
+ * results when turning off the mmu.
*/
-void setup_mm_for_reboot(char mode)
+void setup_mm_for_reboot(void)
{
- /*
- * We need to access to user-mode page tables here. For kernel threads
- * we don't have any user-mode mappings so we use the context that we
- * "borrowed".
- */
- identity_mapping_add(current->active_mm->pgd, 0, TASK_SIZE);
+ /* Clean and invalidate L1. */
+ flush_cache_all();
+
+ /* Switch to the identity mapping. */
+ cpu_switch_mm(idmap_pgd, &init_mm);
+
+ /* Flush the TLB. */
local_flush_tlb_all();
}
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index fbdd12e..e34ea8a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -20,7 +20,6 @@
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
-#include <linux/sort.h>
#include <asm/mach-types.h>
#include <asm/prom.h>
@@ -32,6 +31,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/memblock.h>
#include "mm.h"
@@ -134,30 +134,18 @@
}
static void __init find_limits(unsigned long *min, unsigned long *max_low,
- unsigned long *max_high)
+ unsigned long *max_high)
{
struct meminfo *mi = &meminfo;
int i;
- *min = -1UL;
- *max_low = *max_high = 0;
-
- for_each_bank (i, mi) {
- struct membank *bank = &mi->bank[i];
- unsigned long start, end;
-
- start = bank_pfn_start(bank);
- end = bank_pfn_end(bank);
-
- if (*min > start)
- *min = start;
- if (*max_high < end)
- *max_high = end;
- if (bank->highmem)
- continue;
- if (*max_low < end)
- *max_low = end;
- }
+ /* This assumes the meminfo array is properly sorted */
+ *min = bank_pfn_start(&mi->bank[0]);
+ for_each_bank (i, mi)
+ if (mi->bank[i].highmem)
+ break;
+ *max_low = bank_pfn_end(&mi->bank[i - 1]);
+ *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
}
static void __init arm_bootmem_init(unsigned long start_pfn,
@@ -319,20 +307,10 @@
}
#endif
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
- const struct membank *a = _a, *b = _b;
- long cmp = bank_pfn_start(a) - bank_pfn_start(b);
- return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
{
int i;
- sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
- memblock_init();
for (i = 0; i < mi->nr_banks; i++)
memblock_add(mi->bank[i].start, mi->bank[i].size);
@@ -371,7 +349,7 @@
if (mdesc->reserve)
mdesc->reserve();
- memblock_analyze();
+ memblock_allow_resize();
memblock_dump_all();
}
@@ -403,8 +381,6 @@
*/
arm_bootmem_free(min, max_low, max_high);
- high_memory = __va(((phys_addr_t)max_low << PAGE_SHIFT) - 1) + 1;
-
/*
* This doesn't seem to be used by the Linux memory manager any
* more, but is used by ll_rw_block. If we can get rid of it, we
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index bdb248c..80632e8 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -36,12 +36,6 @@
#include <asm/mach/map.h>
#include "mm.h"
-/*
- * Used by ioremap() and iounmap() code to mark (super)section-mapped
- * I/O regions in vm_struct->flags field.
- */
-#define VM_ARM_SECTION_MAPPING 0x80000000
-
int ioremap_page(unsigned long virt, unsigned long phys,
const struct mem_type *mtype)
{
@@ -64,7 +58,7 @@
} while (seq != init_mm.context.kvm_seq);
}
-#ifndef CONFIG_SMP
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
* Section support is unsafe on SMP - If you iounmap and ioremap a region,
* the other CPUs will not see this change until their next context switch.
@@ -79,13 +73,16 @@
{
unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmdp;
flush_cache_vunmap(addr, end);
pgd = pgd_offset_k(addr);
+ pud = pud_offset(pgd, addr);
+ pmdp = pmd_offset(pud, addr);
do {
- pmd_t pmd, *pmdp = pmd_offset(pgd, addr);
+ pmd_t pmd = *pmdp;
- pmd = *pmdp;
if (!pmd_none(pmd)) {
/*
* Clear the PMD from the page table, and
@@ -104,8 +101,8 @@
pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
}
- addr += PGDIR_SIZE;
- pgd++;
+ addr += PMD_SIZE;
+ pmdp += 2;
} while (addr < end);
/*
@@ -124,6 +121,8 @@
{
unsigned long addr = virt, end = virt + size;
pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
/*
* Remove and free any PTE-based mapping, and
@@ -132,17 +131,17 @@
unmap_area_sections(virt, size);
pgd = pgd_offset_k(addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
do {
- pmd_t *pmd = pmd_offset(pgd, addr);
-
pmd[0] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
pfn += SZ_1M >> PAGE_SHIFT;
pmd[1] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
pfn += SZ_1M >> PAGE_SHIFT;
flush_pmd_entry(pmd);
- addr += PGDIR_SIZE;
- pgd++;
+ addr += PMD_SIZE;
+ pmd += 2;
} while (addr < end);
return 0;
@@ -154,6 +153,8 @@
{
unsigned long addr = virt, end = virt + size;
pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
/*
* Remove and free any PTE-based mapping, and
@@ -162,6 +163,8 @@
unmap_area_sections(virt, size);
pgd = pgd_offset_k(virt);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
do {
unsigned long super_pmd_val, i;
@@ -170,14 +173,12 @@
super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
for (i = 0; i < 8; i++) {
- pmd_t *pmd = pmd_offset(pgd, addr);
-
pmd[0] = __pmd(super_pmd_val);
pmd[1] = __pmd(super_pmd_val);
flush_pmd_entry(pmd);
- addr += PGDIR_SIZE;
- pgd++;
+ addr += PMD_SIZE;
+ pmd += 2;
}
pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
@@ -195,17 +196,13 @@
unsigned long addr;
struct vm_struct * area;
+#ifndef CONFIG_ARM_LPAE
/*
* High mappings must be supersection aligned
*/
if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
return NULL;
-
- /*
- * Don't allow RAM to be mapped - this causes problems with ARMv6+
- */
- if (WARN_ON(pfn_valid(pfn)))
- return NULL;
+#endif
type = get_mem_type(mtype);
if (!type)
@@ -216,12 +213,40 @@
*/
size = PAGE_ALIGN(offset + size);
+ /*
+ * Try to reuse one of the static mapping whenever possible.
+ */
+ read_lock(&vmlist_lock);
+ for (area = vmlist; area; area = area->next) {
+ if (!size || (sizeof(phys_addr_t) == 4 && pfn >= 0x100000))
+ break;
+ if (!(area->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
+ continue;
+ if (__phys_to_pfn(area->phys_addr) > pfn ||
+ __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
+ continue;
+ /* we can drop the lock here as we know *area is static */
+ read_unlock(&vmlist_lock);
+ addr = (unsigned long)area->addr;
+ addr += __pfn_to_phys(pfn) - area->phys_addr;
+ return (void __iomem *) (offset + addr);
+ }
+ read_unlock(&vmlist_lock);
+
+ /*
+ * Don't allow RAM to be mapped - this causes problems with ARMv6+
+ */
+ if (WARN_ON(pfn_valid(pfn)))
+ return NULL;
+
area = get_vm_area_caller(size, VM_IOREMAP, caller);
if (!area)
return NULL;
addr = (unsigned long)area->addr;
-#ifndef CONFIG_SMP
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
if (DOMAIN_IO == 0 &&
(((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
cpu_is_xsc3()) && pfn >= 0x100000 &&
@@ -313,28 +338,34 @@
void __iounmap(volatile void __iomem *io_addr)
{
void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
-#ifndef CONFIG_SMP
- struct vm_struct **p, *tmp;
+ struct vm_struct *vm;
- /*
- * If this is a section based mapping we need to handle it
- * specially as the VM subsystem does not know how to handle
- * such a beast. We need the lock here b/c we need to clear
- * all the mappings before the area can be reclaimed
- * by someone else.
- */
- write_lock(&vmlist_lock);
- for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
- if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
- if (tmp->flags & VM_ARM_SECTION_MAPPING) {
- unmap_area_sections((unsigned long)tmp->addr,
- tmp->size);
- }
+ read_lock(&vmlist_lock);
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (vm->addr > addr)
+ break;
+ if (!(vm->flags & VM_IOREMAP))
+ continue;
+ /* If this is a static mapping we must leave it alone */
+ if ((vm->flags & VM_ARM_STATIC_MAPPING) &&
+ (vm->addr <= addr) && (vm->addr + vm->size > addr)) {
+ read_unlock(&vmlist_lock);
+ return;
+ }
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
+ /*
+ * If this is a section based mapping we need to handle it
+ * specially as the VM subsystem does not know how to handle
+ * such a beast.
+ */
+ if ((vm->addr == addr) &&
+ (vm->flags & VM_ARM_SECTION_MAPPING)) {
+ unmap_area_sections((unsigned long)vm->addr, vm->size);
break;
}
- }
- write_unlock(&vmlist_lock);
#endif
+ }
+ read_unlock(&vmlist_lock);
vunmap(addr);
}
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index ad7cce3..70f6d3ea 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -21,6 +21,20 @@
extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+/*
+ * ARM specific vm_struct->flags bits.
+ */
+
+/* (super)section-mapped I/O regions used by ioremap()/iounmap() */
+#define VM_ARM_SECTION_MAPPING 0x80000000
+
+/* permanent static mappings from iotable_init() */
+#define VM_ARM_STATIC_MAPPING 0x40000000
+
+/* mapping type (attributes) for permanent static mappings */
+#define VM_ARM_MTYPE(mt) ((mt) << 20)
+#define VM_ARM_MTYPE_MASK (0x1f << 20)
+
#endif
#ifdef CONFIG_ZONE_DMA
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 74be05f..ce8cb19 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -9,13 +9,51 @@
#include <linux/io.h>
#include <linux/personality.h>
#include <linux/random.h>
-#include <asm/cputype.h>
-#include <asm/system.h>
+#include <asm/cachetype.h>
+
+static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr,
+ unsigned long pgoff)
+{
+ unsigned long base = addr & ~(SHMLBA-1);
+ unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1);
+
+ if (base + off <= addr)
+ return base + off;
+
+ return base - off;
+}
#define COLOUR_ALIGN(addr,pgoff) \
((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \
(((pgoff)<<PAGE_SHIFT) & (SHMLBA-1)))
+/* gap between mmap and stack */
+#define MIN_GAP (128*1024*1024UL)
+#define MAX_GAP ((TASK_SIZE)/6*5)
+
+static int mmap_is_legacy(void)
+{
+ if (current->personality & ADDR_COMPAT_LAYOUT)
+ return 1;
+
+ if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
+ return 1;
+
+ return sysctl_legacy_va_layout;
+}
+
+static unsigned long mmap_base(unsigned long rnd)
+{
+ unsigned long gap = rlimit(RLIMIT_STACK);
+
+ if (gap < MIN_GAP)
+ gap = MIN_GAP;
+ else if (gap > MAX_GAP)
+ gap = MAX_GAP;
+
+ return PAGE_ALIGN(TASK_SIZE - gap - rnd);
+}
+
/*
* We need to ensure that shared mappings are correctly aligned to
* avoid aliasing issues with VIPT caches. We need to ensure that
@@ -32,25 +70,15 @@
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long start_addr;
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
- unsigned int cache_type;
- int do_align = 0, aliasing = 0;
+ int do_align = 0;
+ int aliasing = cache_is_vipt_aliasing();
/*
* We only need to do colour alignment if either the I or D
- * caches alias. This is indicated by bits 9 and 21 of the
- * cache type register.
+ * caches alias.
*/
- cache_type = read_cpuid_cachetype();
- if (cache_type != read_cpuid_id()) {
- aliasing = (cache_type | cache_type >> 12) & (1 << 11);
- if (aliasing)
- do_align = filp || flags & MAP_SHARED;
- }
-#else
-#define do_align 0
-#define aliasing 0
-#endif
+ if (aliasing)
+ do_align = filp || (flags & MAP_SHARED);
/*
* We enforce the MAP_FIXED case.
@@ -79,13 +107,9 @@
if (len > mm->cached_hole_size) {
start_addr = addr = mm->free_area_cache;
} else {
- start_addr = addr = TASK_UNMAPPED_BASE;
+ start_addr = addr = mm->mmap_base;
mm->cached_hole_size = 0;
}
- /* 8 bits of randomness in 20 address space bits */
- if ((current->flags & PF_RANDOMIZE) &&
- !(current->personality & ADDR_NO_RANDOMIZE))
- addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
full_search:
if (do_align)
@@ -122,6 +146,134 @@
}
}
+unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+ const unsigned long len, const unsigned long pgoff,
+ const unsigned long flags)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ unsigned long addr = addr0;
+ int do_align = 0;
+ int aliasing = cache_is_vipt_aliasing();
+
+ /*
+ * We only need to do colour alignment if either the I or D
+ * caches alias.
+ */
+ if (aliasing)
+ do_align = filp || (flags & MAP_SHARED);
+
+ /* requested length too big for entire address space */
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+
+ if (flags & MAP_FIXED) {
+ if (aliasing && flags & MAP_SHARED &&
+ (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
+ return -EINVAL;
+ return addr;
+ }
+
+ /* requesting a specific address */
+ if (addr) {
+ if (do_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
+ vma = find_vma(mm, addr);
+ if (TASK_SIZE - len >= addr &&
+ (!vma || addr + len <= vma->vm_start))
+ return addr;
+ }
+
+ /* check if free_area_cache is useful for us */
+ if (len <= mm->cached_hole_size) {
+ mm->cached_hole_size = 0;
+ mm->free_area_cache = mm->mmap_base;
+ }
+
+ /* either no address requested or can't fit in requested address hole */
+ addr = mm->free_area_cache;
+ if (do_align) {
+ unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff);
+ addr = base + len;
+ }
+
+ /* make sure it can fit in the remaining address space */
+ if (addr > len) {
+ vma = find_vma(mm, addr-len);
+ if (!vma || addr <= vma->vm_start)
+ /* remember the address as a hint for next time */
+ return (mm->free_area_cache = addr-len);
+ }
+
+ if (mm->mmap_base < len)
+ goto bottomup;
+
+ addr = mm->mmap_base - len;
+ if (do_align)
+ addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+
+ do {
+ /*
+ * Lookup failure means no vma is above this address,
+ * else if new region fits below vma->vm_start,
+ * return with success:
+ */
+ vma = find_vma(mm, addr);
+ if (!vma || addr+len <= vma->vm_start)
+ /* remember the address as a hint for next time */
+ return (mm->free_area_cache = addr);
+
+ /* remember the largest hole we saw so far */
+ if (addr + mm->cached_hole_size < vma->vm_start)
+ mm->cached_hole_size = vma->vm_start - addr;
+
+ /* try just below the current vma->vm_start */
+ addr = vma->vm_start - len;
+ if (do_align)
+ addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+ } while (len < vma->vm_start);
+
+bottomup:
+ /*
+ * A failed mmap() very likely causes application failure,
+ * so fall back to the bottom-up function here. This scenario
+ * can happen with large stack limits and large mmap()
+ * allocations.
+ */
+ mm->cached_hole_size = ~0UL;
+ mm->free_area_cache = TASK_UNMAPPED_BASE;
+ addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
+ /*
+ * Restore the topdown base:
+ */
+ mm->free_area_cache = mm->mmap_base;
+ mm->cached_hole_size = ~0UL;
+
+ return addr;
+}
+
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+ unsigned long random_factor = 0UL;
+
+ /* 8 bits of randomness in 20 address space bits */
+ if ((current->flags & PF_RANDOMIZE) &&
+ !(current->personality & ADDR_NO_RANDOMIZE))
+ random_factor = (get_random_int() % (1 << 8)) << PAGE_SHIFT;
+
+ if (mmap_is_legacy()) {
+ mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
+ mm->get_unmapped_area = arch_get_unmapped_area;
+ mm->unmap_area = arch_unmap_area;
+ } else {
+ mm->mmap_base = mmap_base(random_factor);
+ mm->get_unmapped_area = arch_get_unmapped_area_topdown;
+ mm->unmap_area = arch_unmap_area_topdown;
+ }
+}
/*
* You really shouldn't be using read() or write() on /dev/mem. This
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index dc8c550..94c5a0c 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -15,6 +15,7 @@
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/fs.h>
+#include <linux/vmalloc.h>
#include <asm/cputype.h>
#include <asm/sections.h>
@@ -150,6 +151,7 @@
}
early_param("nowb", early_nowrite);
+#ifndef CONFIG_ARM_LPAE
static int __init early_ecc(char *p)
{
if (memcmp(p, "on", 2) == 0)
@@ -159,6 +161,7 @@
return 0;
}
early_param("ecc", early_ecc);
+#endif
static int __init noalign_setup(char *__unused)
{
@@ -228,10 +231,12 @@
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_KERNEL,
},
+#ifndef CONFIG_ARM_LPAE
[MT_MINICLEAN] = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
.domain = DOMAIN_KERNEL,
},
+#endif
[MT_LOW_VECTORS] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_RDONLY,
@@ -429,6 +434,7 @@
* ARMv6 and above have extended page tables.
*/
if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
+#ifndef CONFIG_ARM_LPAE
/*
* Mark cache clean areas and XIP ROM read only
* from SVC mode and no access from userspace.
@@ -436,6 +442,7 @@
mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+#endif
if (is_smp()) {
/*
@@ -474,6 +481,18 @@
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
}
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Do not generate access flag faults for the kernel mappings.
+ */
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+ mem_types[i].prot_pte |= PTE_EXT_AF;
+ mem_types[i].prot_sect |= PMD_SECT_AF;
+ }
+ kern_pgprot |= PTE_EXT_AF;
+ vecs_pgprot |= PTE_EXT_AF;
+#endif
+
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
@@ -529,13 +548,18 @@
#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
-static void __init *early_alloc(unsigned long sz)
+static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
{
- void *ptr = __va(memblock_alloc(sz, sz));
+ void *ptr = __va(memblock_alloc(sz, align));
memset(ptr, 0, sz);
return ptr;
}
+static void __init *early_alloc(unsigned long sz)
+{
+ return early_alloc_aligned(sz, sz);
+}
+
static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
{
if (pmd_none(*pmd)) {
@@ -572,8 +596,10 @@
if (((addr | end | phys) & ~SECTION_MASK) == 0) {
pmd_t *p = pmd;
+#ifndef CONFIG_ARM_LPAE
if (addr & SECTION_SIZE)
pmd++;
+#endif
do {
*pmd = __pmd(phys | type->prot_sect);
@@ -603,6 +629,7 @@
} while (pud++, addr = next, addr != end);
}
+#ifndef CONFIG_ARM_LPAE
static void __init create_36bit_mapping(struct map_desc *md,
const struct mem_type *type)
{
@@ -662,6 +689,7 @@
pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
} while (addr != end);
}
+#endif /* !CONFIG_ARM_LPAE */
/*
* Create the page directory entries and any necessary
@@ -685,14 +713,16 @@
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
- md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+ md->virtual >= PAGE_OFFSET &&
+ (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
printk(KERN_WARNING "BUG: mapping for 0x%08llx"
- " at 0x%08lx overlaps vmalloc space\n",
+ " at 0x%08lx out of vmalloc space\n",
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
}
type = &mem_types[md->type];
+#ifndef CONFIG_ARM_LPAE
/*
* Catch 36-bit addresses
*/
@@ -700,6 +730,7 @@
create_36bit_mapping(md, type);
return;
}
+#endif
addr = md->virtual & PAGE_MASK;
phys = __pfn_to_phys(md->pfn);
@@ -729,18 +760,33 @@
*/
void __init iotable_init(struct map_desc *io_desc, int nr)
{
- int i;
+ struct map_desc *md;
+ struct vm_struct *vm;
- for (i = 0; i < nr; i++)
- create_mapping(io_desc + i);
+ if (!nr)
+ return;
+
+ vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm));
+
+ for (md = io_desc; nr; md++, nr--) {
+ create_mapping(md);
+ vm->addr = (void *)(md->virtual & PAGE_MASK);
+ vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
+ vm->phys_addr = __pfn_to_phys(md->pfn);
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->flags |= VM_ARM_MTYPE(md->type);
+ vm->caller = iotable_init;
+ vm_area_add_early(vm++);
+ }
}
-static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
+static void * __initdata vmalloc_min =
+ (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
/*
* vmalloc=size forces the vmalloc area to be exactly 'size'
* bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
+ * area - the default is 240m.
*/
static int __init early_vmalloc(char *arg)
{
@@ -775,6 +821,9 @@
struct membank *bank = &meminfo.bank[j];
*bank = meminfo.bank[i];
+ if (bank->start > ULONG_MAX)
+ highmem = 1;
+
#ifdef CONFIG_HIGHMEM
if (__va(bank->start) >= vmalloc_min ||
__va(bank->start) < (void *)PAGE_OFFSET)
@@ -786,7 +835,7 @@
* Split those memory banks which are partially overlapping
* the vmalloc area greatly simplifying things later.
*/
- if (__va(bank->start) < vmalloc_min &&
+ if (!highmem && __va(bank->start) < vmalloc_min &&
bank->size > vmalloc_min - __va(bank->start)) {
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
@@ -807,6 +856,17 @@
bank->highmem = highmem;
/*
+ * Highmem banks not allowed with !CONFIG_HIGHMEM.
+ */
+ if (highmem) {
+ printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
+ "(!CONFIG_HIGHMEM).\n",
+ (unsigned long long)bank->start,
+ (unsigned long long)bank->start + bank->size - 1);
+ continue;
+ }
+
+ /*
* Check whether this memory bank would entirely overlap
* the vmalloc area.
*/
@@ -860,6 +920,7 @@
}
#endif
meminfo.nr_banks = j;
+ high_memory = __va(lowmem_limit - 1) + 1;
memblock_set_current_limit(lowmem_limit);
}
@@ -890,14 +951,20 @@
/*
* Clear out all the kernel space mappings, except for the first
- * memory bank, up to the end of the vmalloc region.
+ * memory bank, up to the vmalloc region.
*/
for (addr = __phys_to_virt(end);
- addr < VMALLOC_END; addr += PMD_SIZE)
+ addr < VMALLOC_START; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
}
+#ifdef CONFIG_ARM_LPAE
+/* the first page is reserved for pgd */
+#define SWAPPER_PG_DIR_SIZE (PAGE_SIZE + \
+ PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
+#else
#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
+#endif
/*
* Reserve the special regions of memory
@@ -920,8 +987,8 @@
}
/*
- * Set up device the mappings. Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * Set up the device mappings. Since we clear out the page tables for all
+ * mappings above VMALLOC_START, we will remove any debug device mappings.
* This means you have to be careful how you debug this function, or any
* called function. This means you can't use any function or debugging
* method which may touch any device, otherwise the kernel _will_ crash.
@@ -936,7 +1003,7 @@
*/
vectors_page = early_alloc(PAGE_SIZE);
- for (addr = VMALLOC_END; addr; addr += PMD_SIZE)
+ for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
/*
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 941a98c..4fc6794 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -29,6 +29,8 @@
void __init sanity_check_meminfo(void)
{
+ phys_addr_t end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
+ high_memory = __va(end - 1) + 1;
}
/*
@@ -43,7 +45,7 @@
/*
* We don't need to do anything here for nommu machines.
*/
-void setup_mm_for_reboot(char mode)
+void setup_mm_for_reboot(void)
{
}
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index b2027c1..a3e78cc 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -10,6 +10,7 @@
#include <linux/mm.h>
#include <linux/gfp.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
@@ -17,6 +18,14 @@
#include "mm.h"
+#ifdef CONFIG_ARM_LPAE
+#define __pgd_alloc() kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL)
+#define __pgd_free(pgd) kfree(pgd)
+#else
+#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL, 2)
+#define __pgd_free(pgd) free_pages((unsigned long)pgd, 2)
+#endif
+
/*
* need to get a 16k page for level 1
*/
@@ -27,7 +36,7 @@
pmd_t *new_pmd, *init_pmd;
pte_t *new_pte, *init_pte;
- new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
+ new_pgd = __pgd_alloc();
if (!new_pgd)
goto no_pgd;
@@ -42,10 +51,25 @@
clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Allocate PMD table for modules and pkmap mappings.
+ */
+ new_pud = pud_alloc(mm, new_pgd + pgd_index(MODULES_VADDR),
+ MODULES_VADDR);
+ if (!new_pud)
+ goto no_pud;
+
+ new_pmd = pmd_alloc(mm, new_pud, 0);
+ if (!new_pmd)
+ goto no_pmd;
+#endif
+
if (!vectors_high()) {
/*
* On ARM, first page must always be allocated since it
- * contains the machine vectors.
+ * contains the machine vectors. The vectors are always high
+ * with LPAE.
*/
new_pud = pud_alloc(mm, new_pgd, 0);
if (!new_pud)
@@ -74,7 +98,7 @@
no_pmd:
pud_free(mm, new_pud);
no_pud:
- free_pages((unsigned long)new_pgd, 2);
+ __pgd_free(new_pgd);
no_pgd:
return NULL;
}
@@ -111,5 +135,24 @@
pgd_clear(pgd);
pud_free(mm, pud);
no_pgd:
- free_pages((unsigned long) pgd_base, 2);
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Free modules/pkmap or identity pmd tables.
+ */
+ for (pgd = pgd_base; pgd < pgd_base + PTRS_PER_PGD; pgd++) {
+ if (pgd_none_or_clear_bad(pgd))
+ continue;
+ if (pgd_val(*pgd) & L_PGD_SWAPPER)
+ continue;
+ pud = pud_offset(pgd, 0);
+ if (pud_none_or_clear_bad(pud))
+ continue;
+ pmd = pmd_offset(pud, 0);
+ pud_clear(pud);
+ pmd_free(mm, pmd);
+ pgd_clear(pgd);
+ pud_free(mm, pud);
+ }
+#endif
+ __pgd_free(pgd_base);
}
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 6746966..2349513 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -95,6 +95,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm1020_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -107,6 +108,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm1020_reset)
+ .popsection
/*
* cpu_arm1020_do_idle()
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 4251421..c244b06 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -95,6 +95,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm1020e_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -107,6 +108,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm1020e_reset)
+ .popsection
/*
* cpu_arm1020e_do_idle()
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index d283cf3..38fe22e 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -84,6 +84,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm1022_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -96,6 +97,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm1022_reset)
+ .popsection
/*
* cpu_arm1022_do_idle()
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 678a1ce..3eb9c3c 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -84,6 +84,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm1026_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -96,6 +97,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm1026_reset)
+ .popsection
/*
* cpu_arm1026_do_idle()
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index e5b974c..4fbeb5b 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -225,6 +225,7 @@
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm6_reset)
ENTRY(cpu_arm7_reset)
mov r1, #0
@@ -235,6 +236,9 @@
mov r1, #0x30
mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
mov pc, r0
+ENDPROC(cpu_arm6_reset)
+ENDPROC(cpu_arm7_reset)
+ .popsection
__CPUINIT
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 55f4e29..0ac908c 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -101,6 +101,7 @@
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm720_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
@@ -112,6 +113,8 @@
bic ip, ip, #0x2100 @ ..v....s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm720_reset)
+ .popsection
__CPUINIT
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 4506be3..dc5de5d 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -49,6 +49,7 @@
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm740_reset)
mov ip, #0
mcr p15, 0, ip, c7, c0, 0 @ invalidate cache
@@ -56,6 +57,8 @@
bic ip, ip, #0x0000000c @ ............wc..
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm740_reset)
+ .popsection
__CPUINIT
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 7e0e1fe..6ddea3e 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -45,8 +45,11 @@
* Params : loc(r0) address to jump to
* Purpose : Sets up everything for a reset and jump to the location for soft reset.
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm7tdmi_reset)
mov pc, r0
+ENDPROC(cpu_arm7tdmi_reset)
+ .popsection
__CPUINIT
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 88fb3d9..cb941ae 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -85,6 +85,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm920_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -97,6 +98,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm920_reset)
+ .popsection
/*
* cpu_arm920_do_idle()
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 490e188..4ec0e07 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -87,6 +87,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm922_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -99,6 +100,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm922_reset)
+ .popsection
/*
* cpu_arm922_do_idle()
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 51d494b..9dccd9a 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -108,6 +108,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm925_reset)
/* Send software reset to MPU and DSP */
mov ip, #0xff000000
@@ -115,6 +116,8 @@
orr ip, ip, #0x0000ce00
mov r4, #1
strh r4, [ip, #0x10]
+ENDPROC(cpu_arm925_reset)
+ .popsection
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 9f8fd91..820259b 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -77,6 +77,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm926_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -89,6 +90,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm926_reset)
+ .popsection
/*
* cpu_arm926_do_idle()
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index ac750d5..9fdc0a1 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -48,6 +48,7 @@
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm940_reset)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
@@ -58,6 +59,8 @@
bic ip, ip, #0x00001000 @ i-cache
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm940_reset)
+ .popsection
/*
* cpu_arm940_do_idle()
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 683af3a..f684cfe 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -55,6 +55,7 @@
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm946_reset)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
@@ -65,6 +66,8 @@
bic ip, ip, #0x00001000 @ i-cache
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm946_reset)
+ .popsection
/*
* cpu_arm946_do_idle()
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 2120f9e..8881391d 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -45,8 +45,11 @@
* Params : loc(r0) address to jump to
* Purpose : Sets up everything for a reset and jump to the location for soft reset.
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm9tdmi_reset)
mov pc, r0
+ENDPROC(cpu_arm9tdmi_reset)
+ .popsection
__CPUINIT
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 4c7a571..272558a 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -57,6 +57,7 @@
* loc: location to jump to for soft reset
*/
.align 4
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_fa526_reset)
/* TODO: Use CP8 if possible... */
mov ip, #0
@@ -73,6 +74,8 @@
nop
nop
mov pc, r0
+ENDPROC(cpu_fa526_reset)
+ .popsection
/*
* cpu_fa526_do_idle()
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 8a6c2f7..ba3c500 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -98,6 +98,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_feroceon_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -110,6 +111,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_feroceon_reset)
+ .popsection
/*
* cpu_feroceon_do_idle()
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 307a4de..2d8ff3a 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -91,8 +91,9 @@
#if L_PTE_SHARED != PTE_EXT_SHARED
#error PTE shared bit mismatch
#endif
-#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
- L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
+#if !defined (CONFIG_ARM_LPAE) && \
+ (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
+ L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
#error Invalid Linux PTE bit settings
#endif
#endif /* CONFIG_MMU */
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index db52b0f..cdfedc5 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -69,6 +69,7 @@
* (same as arm926)
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_mohawk_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -79,6 +80,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_mohawk_reset)
+ .popsection
/*
* cpu_mohawk_do_idle()
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index d50ada2..775d70f 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -62,6 +62,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_sa110_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -74,6 +75,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_sa110_reset)
+ .popsection
/*
* cpu_sa110_do_idle(type)
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 7d91545..3aa0da1 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -70,6 +70,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_sa1100_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -82,6 +83,8 @@
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_sa1100_reset)
+ .popsection
/*
* cpu_sa1100_do_idle(type)
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index d061d2f..5900cd5 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -55,6 +55,7 @@
* - loc - location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_v6_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
@@ -62,6 +63,8 @@
mov r1, #0
mcr p15, 0, r1, c7, c5, 4 @ ISB
mov pc, r0
+ENDPROC(cpu_v6_reset)
+ .popsection
/*
* cpu_v6_do_idle()
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
new file mode 100644
index 0000000..3a4b3e7
--- /dev/null
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -0,0 +1,171 @@
+/*
+ * arch/arm/mm/proc-v7-2level.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define TTB_S (1 << 1)
+#define TTB_RGN_NC (0 << 3)
+#define TTB_RGN_OC_WBWA (1 << 3)
+#define TTB_RGN_OC_WT (2 << 3)
+#define TTB_RGN_OC_WB (3 << 3)
+#define TTB_NOS (1 << 5)
+#define TTB_IRGN_NC ((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT ((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB ((1 << 0) | (1 << 6))
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS_UP PMD_SECT_WB
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
+
+/*
+ * cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ * Set the translation table base pointer to be pgd_phys
+ *
+ * - pgd_phys - physical address of new TTB
+ *
+ * It is assumed that:
+ * - we are not using split page tables
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+ mov r2, #0
+ ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
+ ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
+#ifdef CONFIG_ARM_ERRATA_430973
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
+ mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
+ isb
+1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
+ isb
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
+ mcr p15, 0, r1, c13, c0, 1 @ set context ID
+ isb
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ * cpu_v7_set_pte_ext(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ *
+ * - ptep - pointer to level 2 translation table entry
+ * (hardware version is stored at +2048 bytes)
+ * - pte - PTE value to store
+ * - ext - value for extended PTE bits
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+ str r1, [r0] @ linux version
+
+ bic r3, r1, #0x000003f0
+ bic r3, r3, #PTE_TYPE_MASK
+ orr r3, r3, r2
+ orr r3, r3, #PTE_EXT_AP0 | 2
+
+ tst r1, #1 << 4
+ orrne r3, r3, #PTE_EXT_TEX(1)
+
+ eor r1, r1, #L_PTE_DIRTY
+ tst r1, #L_PTE_RDONLY | L_PTE_DIRTY
+ orrne r3, r3, #PTE_EXT_APX
+
+ tst r1, #L_PTE_USER
+ orrne r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+ @ allow kernel read/write access to read-only user pages
+ tstne r3, #PTE_EXT_APX
+ bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
+
+ tst r1, #L_PTE_XN
+ orrne r3, r3, #PTE_EXT_XN
+
+ tst r1, #L_PTE_YOUNG
+ tstne r1, #L_PTE_PRESENT
+ moveq r3, #0
+
+ ARM( str r3, [r0, #2048]! )
+ THUMB( add r0, r0, #2048 )
+ THUMB( str r3, [r0] )
+ mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+ /*
+ * Memory region attributes with SCTLR.TRE=1
+ *
+ * n = TEX[0],C,B
+ * TR = PRRR[2n+1:2n] - memory type
+ * IR = NMRR[2n+1:2n] - inner cacheable property
+ * OR = NMRR[2n+17:2n+16] - outer cacheable property
+ *
+ * n TR IR OR
+ * UNCACHED 000 00
+ * BUFFERABLE 001 10 00 00
+ * WRITETHROUGH 010 10 10 10
+ * WRITEBACK 011 10 11 11
+ * reserved 110
+ * WRITEALLOC 111 10 01 01
+ * DEV_SHARED 100 01
+ * DEV_NONSHARED 100 01
+ * DEV_WC 001 10
+ * DEV_CACHED 011 10
+ *
+ * Other attributes:
+ *
+ * DS0 = PRRR[16] = 0 - device shareable property
+ * DS1 = PRRR[17] = 1 - device shareable property
+ * NS0 = PRRR[18] = 0 - normal shareable property
+ * NS1 = PRRR[19] = 1 - normal shareable property
+ * NOS = PRRR[24+n] = 1 - not outer shareable
+ */
+.equ PRRR, 0xff0a81a8
+.equ NMRR, 0x40e040e0
+
+ /*
+ * Macro for setting up the TTBRx and TTBCR registers.
+ * - \ttb0 and \ttb1 updated with the corresponding flags.
+ */
+ .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+ mcr p15, 0, \zero, c2, c0, 2 @ TTB control register
+ ALT_SMP(orr \ttbr0, \ttbr0, #TTB_FLAGS_SMP)
+ ALT_UP(orr \ttbr0, \ttbr0, #TTB_FLAGS_UP)
+ ALT_SMP(orr \ttbr1, \ttbr1, #TTB_FLAGS_SMP)
+ ALT_UP(orr \ttbr1, \ttbr1, #TTB_FLAGS_UP)
+ mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1
+ .endm
+
+ __CPUINIT
+
+ /* AT
+ * TFR EV X F I D LR S
+ * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
+ * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+ * 1 0 110 0011 1100 .111 1101 < we want
+ */
+ .align 2
+ .type v7_crval, #object
+v7_crval:
+ crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
+
+ .previous
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
new file mode 100644
index 0000000..8de0f1d
--- /dev/null
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -0,0 +1,150 @@
+/*
+ * arch/arm/mm/proc-v7-3level.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ * based on arch/arm/mm/proc-v7-2level.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define TTB_IRGN_NC (0 << 8)
+#define TTB_IRGN_WBWA (1 << 8)
+#define TTB_IRGN_WT (2 << 8)
+#define TTB_IRGN_WB (3 << 8)
+#define TTB_RGN_NC (0 << 10)
+#define TTB_RGN_OC_WBWA (1 << 10)
+#define TTB_RGN_OC_WT (2 << 10)
+#define TTB_RGN_OC_WB (3 << 10)
+#define TTB_S (3 << 12)
+#define TTB_EAE (1 << 31)
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP (TTB_IRGN_WB|TTB_RGN_OC_WB)
+#define PMD_FLAGS_UP (PMD_SECT_WB)
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP (TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
+#define PMD_FLAGS_SMP (PMD_SECT_WBWA|PMD_SECT_S)
+
+/*
+ * cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ * Set the translation table base pointer to be pgd_phys (physical address of
+ * the new TTB).
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+ ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ and r3, r1, #0xff
+ mov r3, r3, lsl #(48 - 32) @ ASID
+ mcrr p15, 0, r0, r3, c2 @ set TTB 0
+ isb
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ * cpu_v7_set_pte_ext(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ * - ptep - pointer to level 3 translation table entry
+ * - pte - PTE value to store (64-bit in r2 and r3)
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+ tst r2, #L_PTE_PRESENT
+ beq 1f
+ tst r3, #1 << (55 - 32) @ L_PTE_DIRTY
+ orreq r2, #L_PTE_RDONLY
+1: strd r2, r3, [r0]
+ mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+ /*
+ * Memory region attributes for LPAE (defined in pgtable-3level.h):
+ *
+ * n = AttrIndx[2:0]
+ *
+ * n MAIR
+ * UNCACHED 000 00000000
+ * BUFFERABLE 001 01000100
+ * DEV_WC 001 01000100
+ * WRITETHROUGH 010 10101010
+ * WRITEBACK 011 11101110
+ * DEV_CACHED 011 11101110
+ * DEV_SHARED 100 00000100
+ * DEV_NONSHARED 100 00000100
+ * unused 101
+ * unused 110
+ * WRITEALLOC 111 11111111
+ */
+.equ PRRR, 0xeeaa4400 @ MAIR0
+.equ NMRR, 0xff000004 @ MAIR1
+
+ /*
+ * Macro for setting up the TTBRx and TTBCR registers.
+ * - \ttbr1 updated.
+ */
+ .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+ ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address
+ cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET? (branch below)
+ mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register
+ orr \tmp, \tmp, #TTB_EAE
+ ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP)
+ ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP)
+ ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP << 16)
+ ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP << 16)
+ /*
+ * TTBR0/TTBR1 split (PAGE_OFFSET):
+ * 0x40000000: T0SZ = 2, T1SZ = 0 (not used)
+ * 0x80000000: T0SZ = 0, T1SZ = 1
+ * 0xc0000000: T0SZ = 0, T1SZ = 2
+ *
+ * Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
+ * booting secondary CPUs would end up using TTBR1 for the identity
+ * mapping set up in TTBR0.
+ */
+ bhi 9001f @ PHYS_OFFSET > PAGE_OFFSET?
+ orr \tmp, \tmp, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ
+#if defined CONFIG_VMSPLIT_2G
+ /* PAGE_OFFSET == 0x80000000, T1SZ == 1 */
+ add \ttbr1, \ttbr1, #1 << 4 @ skip two L1 entries
+#elif defined CONFIG_VMSPLIT_3G
+ /* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */
+ add \ttbr1, \ttbr1, #4096 * (1 + 3) @ only L2 used, skip pgd+3*pmd
+#endif
+ /* CONFIG_VMSPLIT_1G does not need TTBR1 adjustment */
+9001: mcr p15, 0, \tmp, c2, c0, 2 @ TTB control register
+ mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
+ .endm
+
+ __CPUINIT
+
+ /*
+ * AT
+ * TFR EV X F IHD LR S
+ * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM
+ * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+ * 11 0 110 1 0011 1100 .111 1101 < we want
+ */
+ .align 2
+ .type v7_crval, #object
+v7_crval:
+ crval clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c
+
+ .previous
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 2c559ac..7e9b5bf 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -19,24 +19,11 @@
#include "proc-macros.S"
-#define TTB_S (1 << 1)
-#define TTB_RGN_NC (0 << 3)
-#define TTB_RGN_OC_WBWA (1 << 3)
-#define TTB_RGN_OC_WT (2 << 3)
-#define TTB_RGN_OC_WB (3 << 3)
-#define TTB_NOS (1 << 5)
-#define TTB_IRGN_NC ((0 << 0) | (0 << 6))
-#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6))
-#define TTB_IRGN_WT ((1 << 0) | (0 << 6))
-#define TTB_IRGN_WB ((1 << 0) | (1 << 6))
-
-/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB
-#define PMD_FLAGS_UP PMD_SECT_WB
-
-/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
-#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
+#ifdef CONFIG_ARM_LPAE
+#include "proc-v7-3level.S"
+#else
+#include "proc-v7-2level.S"
+#endif
ENTRY(cpu_v7_proc_init)
mov pc, lr
@@ -63,6 +50,7 @@
* caches disabled.
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_v7_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
@@ -71,6 +59,7 @@
isb
mov pc, r0
ENDPROC(cpu_v7_reset)
+ .popsection
/*
* cpu_v7_do_idle()
@@ -97,127 +86,12 @@
mov pc, lr
ENDPROC(cpu_v7_dcache_clean_area)
-/*
- * cpu_v7_switch_mm(pgd_phys, tsk)
- *
- * Set the translation table base pointer to be pgd_phys
- *
- * - pgd_phys - physical address of new TTB
- *
- * It is assumed that:
- * - we are not using split page tables
- */
-ENTRY(cpu_v7_switch_mm)
-#ifdef CONFIG_MMU
- mov r2, #0
- ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
- ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
- ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
-#ifdef CONFIG_ARM_ERRATA_430973
- mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
-#endif
-#ifdef CONFIG_ARM_ERRATA_754322
- dsb
-#endif
- mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
- isb
-1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
- isb
-#ifdef CONFIG_ARM_ERRATA_754322
- dsb
-#endif
- mcr p15, 0, r1, c13, c0, 1 @ set context ID
- isb
-#endif
- mov pc, lr
-ENDPROC(cpu_v7_switch_mm)
-
-/*
- * cpu_v7_set_pte_ext(ptep, pte)
- *
- * Set a level 2 translation table entry.
- *
- * - ptep - pointer to level 2 translation table entry
- * (hardware version is stored at +2048 bytes)
- * - pte - PTE value to store
- * - ext - value for extended PTE bits
- */
-ENTRY(cpu_v7_set_pte_ext)
-#ifdef CONFIG_MMU
- str r1, [r0] @ linux version
-
- bic r3, r1, #0x000003f0
- bic r3, r3, #PTE_TYPE_MASK
- orr r3, r3, r2
- orr r3, r3, #PTE_EXT_AP0 | 2
-
- tst r1, #1 << 4
- orrne r3, r3, #PTE_EXT_TEX(1)
-
- eor r1, r1, #L_PTE_DIRTY
- tst r1, #L_PTE_RDONLY | L_PTE_DIRTY
- orrne r3, r3, #PTE_EXT_APX
-
- tst r1, #L_PTE_USER
- orrne r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
- @ allow kernel read/write access to read-only user pages
- tstne r3, #PTE_EXT_APX
- bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
-
- tst r1, #L_PTE_XN
- orrne r3, r3, #PTE_EXT_XN
-
- tst r1, #L_PTE_YOUNG
- tstne r1, #L_PTE_PRESENT
- moveq r3, #0
-
- ARM( str r3, [r0, #2048]! )
- THUMB( add r0, r0, #2048 )
- THUMB( str r3, [r0] )
- mcr p15, 0, r0, c7, c10, 1 @ flush_pte
-#endif
- mov pc, lr
-ENDPROC(cpu_v7_set_pte_ext)
-
string cpu_v7_name, "ARMv7 Processor"
.align
- /*
- * Memory region attributes with SCTLR.TRE=1
- *
- * n = TEX[0],C,B
- * TR = PRRR[2n+1:2n] - memory type
- * IR = NMRR[2n+1:2n] - inner cacheable property
- * OR = NMRR[2n+17:2n+16] - outer cacheable property
- *
- * n TR IR OR
- * UNCACHED 000 00
- * BUFFERABLE 001 10 00 00
- * WRITETHROUGH 010 10 10 10
- * WRITEBACK 011 10 11 11
- * reserved 110
- * WRITEALLOC 111 10 01 01
- * DEV_SHARED 100 01
- * DEV_NONSHARED 100 01
- * DEV_WC 001 10
- * DEV_CACHED 011 10
- *
- * Other attributes:
- *
- * DS0 = PRRR[16] = 0 - device shareable property
- * DS1 = PRRR[17] = 1 - device shareable property
- * NS0 = PRRR[18] = 0 - normal shareable property
- * NS1 = PRRR[19] = 1 - normal shareable property
- * NOS = PRRR[24+n] = 1 - not outer shareable
- */
-.equ PRRR, 0xff0a81a8
-.equ NMRR, 0x40e040e0
-
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 7
+.equ cpu_v7_suspend_size, 4 * 8
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r10, lr}
@@ -226,10 +100,11 @@
stmia r0!, {r4 - r5}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r11, c2, c0, 2 @ TTB control register
mrc p15, 0, r8, c1, c0, 0 @ Control register
mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
- stmia r0, {r6 - r10}
+ stmia r0, {r6 - r11}
ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
@@ -241,13 +116,15 @@
ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
- ldmia r0, {r6 - r10}
+ ldmia r0, {r6 - r11}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+#ifndef CONFIG_ARM_LPAE
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+#endif
mcr p15, 0, r1, c2, c0, 0 @ TTB 0
mcr p15, 0, r7, c2, c0, 1 @ TTB 1
- mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, r11, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
teq r4, r9 @ Is it already set?
mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
@@ -284,6 +161,7 @@
__v7_ca9mp_setup:
mov r10, #(1 << 0) @ TLB ops broadcasting
b 1f
+__v7_ca7mp_setup:
__v7_ca15mp_setup:
mov r10, #0
1:
@@ -363,11 +241,13 @@
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
-#ifdef CONFIG_ARM_ERRATA_751472
- cmp r6, #0x30 @ present prior to r3p0
+#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
+ ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
+ ALT_UP_B(1f)
mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrlt r10, r10, #1 << 11 @ set bit #11
mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
+1:
#endif
3: mov r10, #0
@@ -377,12 +257,7 @@
dsb
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
- mcr p15, 0, r10, c2, c0, 2 @ TTB control register
- ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
- ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
- ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP)
- ALT_UP(orr r8, r8, #TTB_FLAGS_UP)
- mcr p15, 0, r8, c2, c0, 1 @ load TTB1
+ v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup
ldr r5, =PRRR @ PRRR
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
@@ -404,16 +279,7 @@
mov pc, lr @ return to head.S:__ret
ENDPROC(__v7_setup)
- /* AT
- * TFR EV X F I D LR S
- * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
- * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
- * 1 0 110 0011 1100 .111 1101 < we want
- */
- .type v7_crval, #object
-v7_crval:
- crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
-
+ .align 2
__v7_setup_stack:
.space 4 * 11 @ 11 registers
@@ -435,11 +301,11 @@
*/
.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
- PMD_FLAGS_SMP | \mm_mmuflags)
+ PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
- PMD_FLAGS_UP | \mm_mmuflags)
- .long PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ | \io_mmuflags
+ PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags)
+ .long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags
W(b) \initfunc
.long cpu_arch_name
.long cpu_elf_name
@@ -452,6 +318,7 @@
.long v7_cache_fns
.endm
+#ifndef CONFIG_ARM_LPAE
/*
* ARM Ltd. Cortex A5 processor.
*/
@@ -463,6 +330,16 @@
.size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
/*
+ * ARM Ltd. Cortex A7 processor.
+ */
+ .type __v7_ca7mp_proc_info, #object
+__v7_ca7mp_proc_info:
+ .long 0x410fc070
+ .long 0xff0ffff0
+ __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+ .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
+
+ /*
* ARM Ltd. Cortex A9 processor.
*/
.type __v7_ca9mp_proc_info, #object
@@ -471,6 +348,7 @@
.long 0xff0ffff0
__v7_proc __v7_ca9mp_setup
.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+#endif /* CONFIG_ARM_LPAE */
/*
* ARM Ltd. Cortex A15 processor.
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index abf0507..b0d5786 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -105,6 +105,7 @@
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_xsc3_reset)
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
@@ -119,6 +120,8 @@
@ already containing those two last instructions to survive.
mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
mov pc, r0
+ENDPROC(cpu_xsc3_reset)
+ .popsection
/*
* cpu_xsc3_do_idle()
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 3277904..4ffebaa 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -142,6 +142,7 @@
* Beware PXA270 erratum E7.
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_xscale_reset)
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
@@ -160,6 +161,8 @@
@ already containing those two last instructions to survive.
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mov pc, r0
+ENDPROC(cpu_xscale_reset)
+ .popsection
/*
* cpu_xscale_do_idle()
diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
index cafa183..d18dde9 100644
--- a/arch/arm/nwfpe/entry.S
+++ b/arch/arm/nwfpe/entry.S
@@ -20,6 +20,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/opcodes.h>
+
/* This is the kernel's entry point into the floating point emulator.
It is called from the kernel with code similar to this:
@@ -81,11 +83,11 @@
mov r6, r0 @ save the opcode
emulate:
ldr r1, [sp, #S_PSR] @ fetch the PSR
- bl checkCondition @ check the condition
- cmp r0, #0 @ r0 = 0 ==> condition failed
+ bl arm_check_condition @ check the condition
+ cmp r0, #ARM_OPCODE_CONDTEST_PASS @ condition passed?
@ if condition code failed to match, next insn
- beq next @ get the next instruction;
+ bne next @ get the next instruction;
mov r0, r6 @ prepare for EmulateAll()
bl EmulateAll @ emulate the instruction
diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c
index 922b811..ff983467 100644
--- a/arch/arm/nwfpe/fpopcode.c
+++ b/arch/arm/nwfpe/fpopcode.c
@@ -61,29 +61,3 @@
0x41200000 /* single 10.0 */
};
-/* condition code lookup table
- index into the table is test code: EQ, NE, ... LT, GT, AL, NV
- bit position in short is condition code: NZCV */
-static const unsigned short aCC[16] = {
- 0xF0F0, // EQ == Z set
- 0x0F0F, // NE
- 0xCCCC, // CS == C set
- 0x3333, // CC
- 0xFF00, // MI == N set
- 0x00FF, // PL
- 0xAAAA, // VS == V set
- 0x5555, // VC
- 0x0C0C, // HI == C set && Z clear
- 0xF3F3, // LS == C clear || Z set
- 0xAA55, // GE == (N==V)
- 0x55AA, // LT == (N!=V)
- 0x0A05, // GT == (!Z && (N==V))
- 0xF5FA, // LE == (Z || (N!=V))
- 0xFFFF, // AL always
- 0 // NV
-};
-
-unsigned int checkCondition(const unsigned int opcode, const unsigned int ccodes)
-{
- return (aCC[opcode >> 28] >> (ccodes >> 28)) & 1;
-}
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
index 786e4c9..78f02db 100644
--- a/arch/arm/nwfpe/fpopcode.h
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -475,9 +475,6 @@
return (nRc);
}
-extern unsigned int checkCondition(const unsigned int opcode,
- const unsigned int ccodes);
-
extern const float64 float64Constant[];
extern const float32 float32Constant[];
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index c074e66..4e0a371 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -116,7 +116,7 @@
return oprofile_perf_init(ops);
}
-void __exit oprofile_arch_exit(void)
+void oprofile_arch_exit(void)
{
oprofile_perf_exit();
}
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 69b09c1..a99dc15 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -10,10 +10,10 @@
obj-$(CONFIG_ARCH_IOP32X) += pci.o
obj-$(CONFIG_ARCH_IOP32X) += setup.o
obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += io.o
obj-$(CONFIG_ARCH_IOP32X) += cp6.o
obj-$(CONFIG_ARCH_IOP32X) += adma.o
obj-$(CONFIG_ARCH_IOP32X) += pmu.o
+obj-$(CONFIG_ARCH_IOP32X) += restart.o
# IOP33X
obj-$(CONFIG_ARCH_IOP33X) += gpio.o
@@ -21,10 +21,10 @@
obj-$(CONFIG_ARCH_IOP33X) += pci.o
obj-$(CONFIG_ARCH_IOP33X) += setup.o
obj-$(CONFIG_ARCH_IOP33X) += time.o
-obj-$(CONFIG_ARCH_IOP33X) += io.o
obj-$(CONFIG_ARCH_IOP33X) += cp6.o
obj-$(CONFIG_ARCH_IOP33X) += adma.o
obj-$(CONFIG_ARCH_IOP33X) += pmu.o
+obj-$(CONFIG_ARCH_IOP33X) += restart.o
# IOP13XX
obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
deleted file mode 100644
index e15bc17..0000000
--- a/arch/arm/plat-iop/io.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * iop3xx custom ioremap implementation
- * Copyright (c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned int mtype)
-{
- void __iomem * retval;
-
- switch (cookie) {
- case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA:
- retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie);
- break;
- case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA:
- retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
- break;
- default:
- retval = __arm_ioremap_caller(cookie, size, mtype,
- __builtin_return_address(0));
- }
-
- return retval;
-}
-EXPORT_SYMBOL(__iop3xx_ioremap);
-
-void __iop3xx_iounmap(void __iomem *addr)
-{
- extern void __iounmap(volatile void __iomem *addr);
-
- switch ((u32) addr) {
- case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA:
- case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA:
- goto skip;
- }
- __iounmap(addr);
-
-skip:
- return;
-}
-EXPORT_SYMBOL(__iop3xx_iounmap);
diff --git a/arch/arm/plat-iop/restart.c b/arch/arm/plat-iop/restart.c
new file mode 100644
index 0000000..6a85a0c
--- /dev/null
+++ b/arch/arm/plat-iop/restart.c
@@ -0,0 +1,19 @@
+/*
+ * restart.c
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/iop3xx.h>
+#include <mach/hardware.h>
+
+void iop3xx_restart(char mode, const char *cmd)
+{
+ *IOP3XX_PCSR = 0x30;
+
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+}
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 568dd02..cbfbbe4 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,7 +18,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
-#include <linux/sched.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
@@ -52,21 +51,12 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static DEFINE_CLOCK_DATA(cd);
-
/*
* IOP sched_clock() implementation via its clocksource.
*/
-unsigned long long notrace sched_clock(void)
+static u32 notrace iop_read_sched_clock(void)
{
- u32 cyc = 0xffffffffu - read_tcr1();
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace iop_update_sched_clock(void)
-{
- u32 cyc = 0xffffffffu - read_tcr1();
- update_sched_clock(&cd, cyc, (u32)~0);
+ return 0xffffffffu - read_tcr1();
}
/*
@@ -152,7 +142,7 @@
{
u32 timer_ctl;
- init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate);
+ setup_sched_clock(iop_read_sched_clock, 32, tick_rate);
ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
iop_tick_rate = tick_rate;
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b3a1f2b3..b30708e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,7 @@
bool "i.MX3, i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
+ select MIGHT_HAVE_CACHE_L2X0
help
This enables support for systems based on the Freescale i.MX3 and i.MX6
family.
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index b9f0f5f..076db84f 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,7 +5,6 @@
# Common support
obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
-obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 74aac96..73db34b 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -17,6 +17,7 @@
* the CPU clock speed on the fly.
*/
+#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -97,7 +98,7 @@
return ret;
}
-static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+static int mxc_cpufreq_init(struct cpufreq_policy *policy)
{
int ret;
int i;
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
deleted file mode 100644
index 12f8f81..0000000
--- a/arch/arm/plat-mxc/gic.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <asm/exception.h>
-#include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
-{
- u32 irqstat, irqnr;
-
- do {
- irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
- irqnr = irqstat & 0x3ff;
- if (irqnr == 1023)
- break;
-
- if (irqnr > 15 && irqnr < 1021)
- handle_IRQ(irqnr, regs);
-#ifdef CONFIG_SMP
- else {
- writel_relaxed(irqstat, gic_cpu_base_addr +
- GIC_CPU_EOI);
- handle_IPI(irqnr, regs);
- }
-#endif
- } while (1);
-}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 83b745a..83cca9b 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -71,8 +71,8 @@
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_restart(char, const char *);
extern void mxc_arch_reset_init(void __iomem *);
-extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
@@ -85,12 +85,10 @@
};
extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
-extern void (*imx_idle)(void);
extern void imx_print_silicon_rev(const char *cpu, int srev);
void avic_handle_irq(struct pt_regs *);
void tzic_handle_irq(struct pt_regs *);
-void gic_handle_irq(struct pt_regs *);
#define imx1_handle_irq avic_handle_irq
#define imx21_handle_irq avic_handle_irq
@@ -123,6 +121,7 @@
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern void imx_src_init(void);
+extern void imx_src_prepare_restart(void);
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
@@ -133,4 +132,5 @@
extern void imx53_smd_common_init(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_pm_init(void);
+extern void imx6q_clock_map_io(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index ca5cf26..def5d30 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,19 +9,8 @@
* published by the Free Software Foundation.
*/
-/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- .endm
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 97b19e7..2b7c08d 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,8 +12,6 @@
#ifndef __MACH_MX1_H__
#define __MACH_MX1_H__
-#include <mach/vmalloc.h>
-
/*
* Memory map
*/
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 00a7819..a4d36d6 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -50,20 +50,6 @@
#define IMX_CHIP_REVISION_3_3 0x33
#define IMX_CHIP_REVISION_UNKNOWN 0xff
-#define IMX_CHIP_REVISION_1_0_STRING "1.0"
-#define IMX_CHIP_REVISION_1_1_STRING "1.1"
-#define IMX_CHIP_REVISION_1_2_STRING "1.2"
-#define IMX_CHIP_REVISION_1_3_STRING "1.3"
-#define IMX_CHIP_REVISION_2_0_STRING "2.0"
-#define IMX_CHIP_REVISION_2_1_STRING "2.1"
-#define IMX_CHIP_REVISION_2_2_STRING "2.2"
-#define IMX_CHIP_REVISION_2_3_STRING "2.3"
-#define IMX_CHIP_REVISION_3_0_STRING "3.0"
-#define IMX_CHIP_REVISION_3_1_STRING "3.1"
-#define IMX_CHIP_REVISION_3_2_STRING "3.2"
-#define IMX_CHIP_REVISION_3_3_STRING "3.3"
-#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown"
-
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
#endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index cf88b35..13ad0df 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -17,16 +17,9 @@
#ifndef __ASM_ARCH_MXC_SYSTEM_H__
#define __ASM_ARCH_MXC_SYSTEM_H__
-extern void (*imx_idle)(void);
-
static inline void arch_idle(void)
{
- if (imx_idle != NULL)
- (imx_idle)();
- else
- cpu_do_idle();
+ cpu_do_idle();
}
-void arch_reset(char mode, const char *cmd);
-
#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 88fd404..477971b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -98,6 +98,7 @@
case MACH_TYPE_PCM043:
case MACH_TYPE_LILLY1131:
case MACH_TYPE_VPR200:
+ case MACH_TYPE_EUKREA_CPUIMX35SD:
uart_base = MX3X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MAGX_ZN5:
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
deleted file mode 100644
index ef6379c..0000000
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2000 Russell King.
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_VMALLOC_H__
-#define __ASM_ARCH_MXC_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END 0xf4000000UL
-
-#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42d74ea..e032717 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,9 @@
#define MX3_PWMSAR 0x0C /* PWM Sample Register */
#define MX3_PWMPR 0x10 /* PWM Period Register */
#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN (1 << 24)
+#define MX3_PWMCR_WAITEN (1 << 23)
+#define MX3_PWMCR_DBGEN (1 << 22)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_EN (1 << 0)
@@ -74,10 +77,21 @@
do_div(c, period_ns);
duty_cycles = c;
+ /*
+ * according to imx pwm RM, the real period value should be
+ * PERIOD value in PWMPR plus 2.
+ */
+ if (period_cycles > 2)
+ period_cycles -= 2;
+ else
+ period_cycles = 0;
+
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
- cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+ cr = MX3_PWMCR_PRESCALER(prescale) |
+ MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+ MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
if (cpu_is_mx25())
cr |= MX3_PWMCR_CLKSRC_IPG;
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 9dad8dc..3599bf2 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/common.h>
@@ -28,25 +29,18 @@
#include <asm/system.h>
#include <asm/mach-types.h>
-void (*imx_idle)(void) = NULL;
void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
+EXPORT_SYMBOL_GPL(imx_ioremap);
static void __iomem *wdog_base;
/*
* Reset the system. It is called by machine_restart().
*/
-void arch_reset(char mode, const char *cmd)
+void mxc_restart(char mode, const char *cmd)
{
unsigned int wcr_enable;
-#ifdef CONFIG_MACH_MX51_EFIKAMX
- if (machine_is_mx51_efikamx()) {
- mx51_efikamx_reset();
- return;
- }
-#endif
-
if (cpu_is_mx1()) {
wcr_enable = (1 << 0);
} else {
@@ -70,7 +64,7 @@
mdelay(50);
/* we'll take a jump through zero as a poor second */
- cpu_reset(0);
+ soft_restart(0);
}
void mxc_arch_reset_init(void __iomem *base)
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 4b0fe28..1c96cdb 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -108,18 +108,9 @@
static void __iomem *sched_clock_reg;
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace mxc_read_sched_clock(void)
{
- cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
-
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace mxc_update_sched_clock(void)
-{
- cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
}
static int __init mxc_clocksource_init(struct clk *timer_clk)
@@ -129,7 +120,7 @@
sched_clock_reg = reg;
- init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
+ setup_sched_clock(mxc_read_sched_clock, 32, c);
return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
clocksource_mmio_readl_up);
}
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 30b6433..ad1b45b 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -17,7 +17,6 @@
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/err.h>
-#include <linux/sched.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
@@ -79,23 +78,12 @@
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace nomadik_read_sched_clock(void)
{
- u32 cyc;
-
if (unlikely(!mtu_base))
return 0;
- cyc = -readl(mtu_base + MTU_VAL(0));
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace nomadik_update_sched_clock(void)
-{
- u32 cyc = -readl(mtu_base + MTU_VAL(0));
- update_sched_clock(&cd, cyc, (u32)~0);
+ return -readl(mtu_base + MTU_VAL(0));
}
#endif
@@ -231,9 +219,11 @@
rate, 200, 32, clocksource_mmio_readl_down))
pr_err("timer: failed to initialize clock source %s\n",
"mtu_0");
+
#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
- init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
+ setup_sched_clock(nomadik_read_sched_clock, 32, rate);
#endif
+
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 9852622..3df04d9 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
- usb.o fb.o io.o counter_32k.o
+ usb.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index d9f10a3..2ee6341 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
#include <linux/omapfb.h>
#include <plat/common.h>
@@ -66,3 +67,10 @@
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
}
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+ init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index a6cbb71..5f0f229 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -17,7 +17,6 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/sched.h>
#include <linux/clocksource.h>
#include <asm/sched_clock.h>
@@ -37,41 +36,9 @@
#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60).
- * This gives a resolution of about 30us and a wrap period of about 36hrs.
- */
-#define SC_MULT 4000000000u
-#define SC_SHIFT 17
-
-static inline unsigned long long notrace _omap_32k_sched_clock(void)
+static u32 notrace omap_32k_read_sched_clock(void)
{
- u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER)
-unsigned long long notrace sched_clock(void)
-{
- return _omap_32k_sched_clock();
-}
-#else
-unsigned long long notrace omap_32k_sched_clock(void)
-{
- return _omap_32k_sched_clock();
-}
-#endif
-
-static void notrace omap_update_sched_clock(void)
-{
- u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_32k_base ? __raw_readl(timer_32k_base) : 0;
}
/**
@@ -147,8 +114,7 @@
clocksource_mmio_readl_up))
printk(err, "32k_counter");
- init_fixed_sched_clock(&cd, omap_update_sched_clock, 32,
- 32768, SC_MULT, SC_SHIFT);
+ setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
}
return 0;
}
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 197ca03..eb73ab4 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -165,8 +165,8 @@
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
- u8 flags;
# endif
+ u8 flags;
};
#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index c50df48..b4d7ec3 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,94 +27,14 @@
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
-#include <linux/delay.h>
-
#include <plat/i2c.h>
+#include <plat/omap_hwmod.h>
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap1_timer;
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap4_timer;
-extern bool omap_32k_timer_init(void);
extern int __init omap_init_clocksource_32k(void);
-extern unsigned long long notrace omap_32k_sched_clock(void);
extern void omap_reserve(void);
-
-void omap2420_init_early(void);
-void omap2430_init_early(void);
-void omap3430_init_early(void);
-void omap35xx_init_early(void);
-void omap3630_init_early(void);
-void omap3_init_early(void); /* Do not use this one */
-void am35xx_init_early(void);
-void ti816x_init_early(void);
-void omap4430_init_early(void);
+extern int omap_dss_reset(struct omap_hwmod *);
void omap_sram_init(void);
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
- u32 class; /* OMAP class to detect */
- void __iomem *tap; /* Control module ID code */
- void __iomem *sdrc; /* SDRAM Controller */
- void __iomem *sms; /* SDRAM Memory Scheduler */
- void __iomem *ctrl; /* System Control Module */
- void __iomem *ctrl_pad; /* PAD Control Module */
- void __iomem *prm; /* Power and Reset Management */
- void __iomem *cm; /* Clock Management */
- void __iomem *cm2;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_ti816x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_sdrc(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void omap4_map_io(void);
-
-
-/**
- * omap_test_timeout - busy-loop, testing a condition
- * @cond: condition to test until it evaluates to true
- * @timeout: maximum number of microseconds in the timeout
- * @index: loop index (integer)
- *
- * Loop waiting for @cond to become true or until at least @timeout
- * microseconds have passed. To use, define some integer @index in the
- * calling code. After running, if @index == @timeout, then the loop has
- * timed out.
- */
-#define omap_test_timeout(cond, timeout, index) \
-({ \
- for (index = 0; index < timeout; index++) { \
- if (cond) \
- break; \
- udelay(1); \
- } \
-})
-
-extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_iva_device(void);
-extern struct device *omap2_get_l3_device(void);
-extern struct device *omap4_get_dsp_device(void);
-
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 7f2969e..1234944 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -247,8 +247,6 @@
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
-void omap_ioremap_init(void);
-
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
@@ -257,83 +255,9 @@
extern void omap_writel(u32 v, u32 pa);
struct omap_sdrc_params;
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap15xx_map_io(void);
-#else
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
-void omap1_init_early(void);
-
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPTI816X
-extern void omapti816x_map_common_io(void);
-#else
-static inline void omapti816x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
-
-extern void omap2_init_common_infrastructure(void);
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
-#define __arch_ioremap omap_ioremap
-#define __arch_iounmap omap_iounmap
-
-void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
-void omap_iounmap(volatile void __iomem *addr);
-
extern void __init omap_init_consistent_dma_size(void);
#endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 30e1071..ebda738 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -436,20 +436,6 @@
#define INTCPS_NR_MIR_REGS 3
#define INTCPS_NR_IRQS 96
-#ifndef __ASSEMBLY__
-extern void __iomem *omap_irq_base;
-void omap1_init_irq(void);
-void omap2_init_irq(void);
-void omap3_init_irq(void);
-void ti816x_init_irq(void);
-extern int omap_irq_pending(void);
-void omap_intc_save_context(void);
-void omap_intc_restore_context(void);
-void omap3_intc_suspend(void);
-void omap3_intc_prepare_idle(void);
-void omap3_intc_resume_idle(void);
-#endif
-
#include <mach/hardware.h>
#ifdef CONFIG_FIQ
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 1ab9fd6..ac44bde 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -2,7 +2,7 @@
* arch/arm/plat-omap/include/mach/serial.h
*
* Copyright (C) 2009 Texas Instruments
- * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
index c5fa9e9..8e5ebd7 100644
--- a/arch/arm/plat-omap/include/plat/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -12,6 +12,4 @@
cpu_do_idle();
}
-extern void (*arch_reset)(char, const char *);
-
#endif
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
deleted file mode 100644
index 333871f..0000000
--- a/arch/arm/plat-omap/io.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Common io.c file
- * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
-#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
-
-static int initialized;
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-
- WARN(!initialized, "Do not use ioremap before init_early\n");
-
-#ifdef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap1()) {
- if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
- return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
- }
- if (cpu_is_omap7xx()) {
- if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
- return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
-
- if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
- return XLATE(p, OMAP7XX_DSPREG_BASE,
- OMAP7XX_DSPREG_START);
- }
- if (cpu_is_omap15xx()) {
- if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
- return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START);
-
- if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE))
- return XLATE(p, OMAP1510_DSPREG_BASE,
- OMAP1510_DSPREG_START);
- }
- if (cpu_is_omap16xx()) {
- if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE))
- return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START);
-
- if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE))
- return XLATE(p, OMAP16XX_DSPREG_BASE,
- OMAP16XX_DSPREG_START);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP2
- if (cpu_is_omap24xx()) {
- if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
- return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
- if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
- return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
- }
- if (cpu_is_omap2420()) {
- if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
- return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
- if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
- return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
- if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
- return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
- }
- if (cpu_is_omap2430()) {
- if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
- return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
- if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
- return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
- if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
- return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
- if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
- return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP3
- if (cpu_is_ti816x()) {
- if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
- return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
- } else if (cpu_is_omap34xx()) {
- if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
- return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
- if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
- return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
- if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
- return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
- if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
- return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
- if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
- return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
- if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
- return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
- if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
- return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- if (cpu_is_omap44xx()) {
- if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
- return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
- if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
- return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
- if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
- return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
- if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
- return XLATE(p, OMAP44XX_EMIF1_PHYS, \
- OMAP44XX_EMIF1_VIRT);
- if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
- return XLATE(p, OMAP44XX_EMIF2_PHYS, \
- OMAP44XX_EMIF2_VIRT);
- if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
- return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
- if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
- return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
- if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
- return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
- }
-#endif
- return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(omap_ioremap);
-
-void omap_iounmap(volatile void __iomem *addr)
-{
- unsigned long virt = (unsigned long)addr;
-
- if (virt >= VMALLOC_START && virt < VMALLOC_END)
- __iounmap(addr);
-}
-EXPORT_SYMBOL(omap_iounmap);
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
- init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
-
-void __init omap_ioremap_init(void)
-{
- initialized++;
-}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 41ab97e..10d1608 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -384,12 +384,16 @@
struct orion_gpio_chip *ochip;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
+ char gc_label[16];
if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
return;
+ snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
+ orion_gpio_chip_count);
+
ochip = orion_gpio_chips + orion_gpio_chip_count;
- ochip->chip.label = "orion_gpio";
+ ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
ochip->chip.request = orion_gpio_request;
ochip->chip.direction_input = orion_gpio_direction_input;
ochip->chip.get = orion_gpio_get;
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 69a6136..1ed8d13 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -12,7 +12,6 @@
*/
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
@@ -60,24 +59,10 @@
* Orion's sched_clock implementation. It has a resolution of
* at least 7.5ns (133MHz TCLK).
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace orion_read_sched_clock(void)
{
- u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-
-static void notrace orion_update_sched_clock(void)
-{
- u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
- update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void __init setup_sched_clock(unsigned long tclk)
-{
- init_sched_clock(&cd, orion_update_sched_clock, 32, tclk);
+ return ~readl(timer_base + TIMER0_VAL_OFF);
}
/*
@@ -217,7 +202,7 @@
/*
* Set scale and timer for sched_clock.
*/
- setup_sched_clock(tclk);
+ setup_sched_clock(orion_read_sched_clock, 32, tclk);
/*
* Setup free-running clocksource timer (interrupts
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index bcc43f3..084604b 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -19,7 +19,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
index a927666..c7adad0 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -12,7 +12,7 @@
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index b3d3d02..4680799 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -20,7 +20,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 3c63353..1121df1 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -192,27 +192,6 @@
return __raw_readl(S3C2410_GSTATUS1);
}
-/* Hook for arm_pm_restart to ensure we execute the reset code
- * with the caches enabled. It seems at least the S3C2440 has a problem
- * resetting if there is bus activity interrupted by the reset.
- */
-static void s3c24xx_pm_restart(char mode, const char *cmd)
-{
- if (mode != 's') {
- unsigned long flags;
-
- local_irq_save(flags);
- __cpuc_flush_kern_all();
- __cpuc_flush_user_all();
-
- arch_reset(mode, cmd);
- local_irq_restore(flags);
- }
-
- /* fallback, or unhandled */
- arm_machine_restart(mode, cmd);
-}
-
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
/* initialise the io descriptors we need for initialisation */
@@ -226,7 +205,5 @@
}
s3c24xx_init_cpu();
- arm_pm_restart = s3c24xx_pm_restart;
-
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index fc8c5f8..bc42c04 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -22,7 +22,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <asm/irq.h>
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 663b280..68296b1 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -18,7 +18,6 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
#include <linux/device.h>
#include <linux/io.h>
diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
index def76aa..25dc4d4 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
@@ -26,7 +26,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index 0b46d38..48eee39 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -17,7 +17,7 @@
#include <linux/ioport.h>
#include <linux/cpufreq.h>
#include <linux/seq_file.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9b9968f..8167ce6 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -11,6 +11,7 @@
default y
select ARM_VIC if !ARCH_EXYNOS4
select ARM_GIC if ARCH_EXYNOS4
+ select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 8763440..30d8c30 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -13,7 +13,6 @@
# Core files
obj-y += dev-uart.o
-obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 5f84a3f..963edea 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -17,7 +17,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <asm/div64.h>
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
deleted file mode 100644
index a56959e..0000000
--- a/arch/arm/plat-s5p/cpu.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* linux/arch/arm/plat-s5p/cpu.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/s5pc100.h>
-#include <plat/s5pv210.h>
-#include <plat/exynos4.h>
-
-/* table of supported CPUs */
-
-static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6450[] = "S5P6450";
-static const char name_s5pc100[] = "S5PC100";
-static const char name_s5pv210[] = "S5PV210/S5PC110";
-static const char name_exynos4210[] = "EXYNOS4210";
-static const char name_exynos4212[] = "EXYNOS4212";
-static const char name_exynos4412[] = "EXYNOS4412";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S5P6440_CPU_ID,
- .idmask = S5P64XX_CPU_MASK,
- .map_io = s5p6440_map_io,
- .init_clocks = s5p6440_init_clocks,
- .init_uarts = s5p6440_init_uarts,
- .init = s5p64x0_init,
- .name = name_s5p6440,
- }, {
- .idcode = S5P6450_CPU_ID,
- .idmask = S5P64XX_CPU_MASK,
- .map_io = s5p6450_map_io,
- .init_clocks = s5p6450_init_clocks,
- .init_uarts = s5p6450_init_uarts,
- .init = s5p64x0_init,
- .name = name_s5p6450,
- }, {
- .idcode = S5PC100_CPU_ID,
- .idmask = S5PC100_CPU_MASK,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- }, {
- .idcode = S5PV210_CPU_ID,
- .idmask = S5PV210_CPU_MASK,
- .map_io = s5pv210_map_io,
- .init_clocks = s5pv210_init_clocks,
- .init_uarts = s5pv210_init_uarts,
- .init = s5pv210_init,
- .name = name_s5pv210,
- }, {
- .idcode = EXYNOS4210_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4210,
- }, {
- .idcode = EXYNOS4212_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4212,
- }, {
- .idcode = EXYNOS4412_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4412,
- },
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s5p_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5P_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5P_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5P_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S3C_PA_WDT),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5P_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-/* read cpu identification code */
-
-void __init s5p_init_io(struct map_desc *mach_desc,
- int size, void __iomem *cpuid_addr)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(cpuid_addr);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index b5bb774..c496b35 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/gpio.h>
#include <asm/hardware/vic.h>
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
index c833e7b..17c0a2c 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-s5p/s5p-time.c
@@ -10,7 +10,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/err.h>
@@ -321,26 +320,14 @@
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace s5p_read_sched_clock(void)
{
void __iomem *reg = s5p_timer_reg();
if (!reg)
return 0;
- return cyc_to_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
-}
-
-static void notrace s5p_update_sched_clock(void)
-{
- void __iomem *reg = s5p_timer_reg();
-
- if (!reg)
- return;
-
- update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
+ return ~__raw_readl(reg);
}
static void __init s5p_clocksource_init(void)
@@ -358,7 +345,7 @@
s5p_time_setup(timer_source.source_id, TCNT_MAX);
s5p_time_start(timer_source.source_id, PERIODIC);
- init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+ setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
clock_rate, 250, 32, clocksource_mmio_readl_down))
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
index e1cbc72..c8bec9c 100644
--- a/arch/arm/plat-s5p/sysmmu.c
+++ b/arch/arm/plat-s5p/sysmmu.c
@@ -11,6 +11,7 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/export.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c
index ae8b850..786a410 100644
--- a/arch/arm/plat-samsung/clock-clksrc.c
+++ b/arch/arm/plat-samsung/clock-clksrc.c
@@ -16,7 +16,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <plat/clock.h>
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 3b44519..10f7117 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -33,7 +33,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index e657305..a976c02 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/pwm_backlight.h>
-#include <linux/slab.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index dac4760..95509d8 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -202,14 +202,6 @@
extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
#define s3c_cpufreq_debugfs_call(x) x
#else
@@ -226,6 +218,10 @@
extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
#ifdef CONFIG_S3C2410_IOTIMING
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
@@ -235,6 +231,7 @@
extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
#else
+#define s3c2410_iotiming_debugfs NULL
#define s3c2410_iotiming_calc NULL
#define s3c2410_iotiming_get NULL
#define s3c2410_iotiming_set NULL
@@ -242,8 +239,10 @@
/* S3C2412 compatible routines */
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
+#ifdef CONFIG_S3C2412_IOTIMING
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *timings);
@@ -253,6 +252,12 @@
extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
+#else
+#define s3c2412_iotiming_debugfs NULL
+#define s3c2412_iotiming_calc NULL
+#define s3c2412_iotiming_get NULL
+#define s3c2412_iotiming_set NULL
+#endif /* CONFIG_S3C2412_IOTIMING */
#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
#define s3c_freq_dbg(x...) printk(KERN_INFO x)
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 40fd7b6..73cb3cf 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -152,13 +152,9 @@
/* core initialisation functions */
extern void s3c24xx_init_irq(void);
-extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-extern void s5p_init_io(struct map_desc *mach_desc,
- int size, void __iomem *cpuid_addr);
extern void s3c24xx_init_cpu(void);
extern void s3c64xx_init_cpu(void);
@@ -183,22 +179,20 @@
extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
extern struct syscore_ops s3c244x_pm_syscore_ops;
-extern struct syscore_ops s3c64xx_irq_syscore_ops;
-/* system device classes */
+/* system device subsystems */
-extern struct sysdev_class s3c2410_sysclass;
-extern struct sysdev_class s3c2410a_sysclass;
-extern struct sysdev_class s3c2412_sysclass;
-extern struct sysdev_class s3c2416_sysclass;
-extern struct sysdev_class s3c2440_sysclass;
-extern struct sysdev_class s3c2442_sysclass;
-extern struct sysdev_class s3c2443_sysclass;
-extern struct sysdev_class s3c6410_sysclass;
-extern struct sysdev_class s3c64xx_sysclass;
-extern struct sysdev_class s5p64x0_sysclass;
-extern struct sysdev_class s5pv210_sysclass;
-extern struct sysdev_class exynos4_sysclass;
+extern struct bus_type s3c2410_subsys;
+extern struct bus_type s3c2410a_subsys;
+extern struct bus_type s3c2412_subsys;
+extern struct bus_type s3c2416_subsys;
+extern struct bus_type s3c2440_subsys;
+extern struct bus_type s3c2442_subsys;
+extern struct bus_type s3c2443_subsys;
+extern struct bus_type s3c6410_subsys;
+extern struct bus_type s5p64x0_subsys;
+extern struct bus_type s5pv210_subsys;
+extern struct bus_type exynos4_subsys;
extern void (*s5pc1xx_idle)(void);
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 1c1ed54..d015763 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -12,7 +12,7 @@
#include <plat/dma-core.h>
-extern struct sysdev_class dma_sysclass;
+extern struct bus_type dma_subsys;
extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
#define DMA_CH_VALID (1<<31)
diff --git a/arch/arm/plat-samsung/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h
deleted file mode 100644
index f546e88..0000000
--- a/arch/arm/plat-samsung/include/plat/exynos4.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for EXYNOS4 related SoCs */
-
-extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void exynos4_register_clocks(void);
-extern void exynos4210_register_clocks(void);
-extern void exynos4212_register_clocks(void);
-extern void exynos4_setup_clocks(void);
-
-#ifdef CONFIG_ARCH_EXYNOS
-extern int exynos_init(void);
-extern void exynos4_init_irq(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern struct sys_timer exynos4_timer;
-
-#define exynos4_init_uarts exynos4_common_init_uarts
-
-#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index d48245b..df8155b 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -24,6 +24,8 @@
#ifndef __PLAT_GPIO_CFG_H
#define __PLAT_GPIO_CFG_H __FILE__
+#include<linux/types.h>
+
typedef unsigned int __bitwise__ samsung_gpio_pull_t;
typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index dcf6870..61fc537 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -17,11 +17,12 @@
#include <linux/irq.h>
-struct sys_device;
+struct device;
#ifdef CONFIG_PM
extern __init int s3c_pm_init(void);
+extern __init int s3c64xx_pm_init(void);
#else
@@ -29,6 +30,11 @@
{
return 0;
}
+
+static inline int s3c64xx_pm_init(void)
+{
+ return 0;
+}
#endif
/* configuration for the IRQ mask over sleep */
diff --git a/arch/arm/plat-samsung/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h
deleted file mode 100644
index 32ca517..0000000
--- a/arch/arm/plat-samsung/include/plat/reset.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_RESET_H
-#define __PLAT_SAMSUNG_RESET_H __FILE__
-
-extern void (*s5p_reset_hook)(void);
-
-#endif /* __PLAT_SAMSUNG_RESET_H */
diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h
index 5bcfd14..cbae50d 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2412.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2412.h
@@ -21,9 +21,12 @@
extern void s3c2412_init_clocks(int xtal);
extern int s3c2412_baseclk_add(void);
+
+extern void s3c2412_restart(char mode, const char *cmd);
#else
#define s3c2412_init_clocks NULL
#define s3c2412_init_uarts NULL
#define s3c2412_map_io NULL
#define s3c2412_init NULL
+#define s3c2412_restart NULL
#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index a764f85..de2b5bd 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -23,9 +23,11 @@
extern int s3c2416_baseclk_add(void);
+extern void s3c2416_restart(char mode, const char *cmd);
#else
#define s3c2416_init_clocks NULL
#define s3c2416_init_uarts NULL
#define s3c2416_map_io NULL
#define s3c2416_init NULL
+#define s3c2416_restart NULL
#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index 7fae1a0..dce05b4 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -24,11 +24,13 @@
extern int s3c2443_baseclk_add(void);
+extern void s3c2443_restart(char mode, const char *cmd);
#else
#define s3c2443_init_clocks NULL
#define s3c2443_init_uarts NULL
#define s3c2443_map_io NULL
#define s3c2443_init NULL
+#define s3c2443_restart NULL
#endif
/* common code used by s3c2443 and others.
diff --git a/arch/arm/plat-samsung/include/plat/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h
deleted file mode 100644
index 37d428a..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c6400.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S3C6400 related SoCs */
-
-extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_setup_clocks(void);
-
-extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#define s3c6400_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_init_uarts NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h
deleted file mode 100644
index 20a6675..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c6410.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6410 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#define s3c6410_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_init_uarts NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h
deleted file mode 100644
index bf85ebb..0000000
--- a/arch/arm/plat-samsung/include/plat/s5p6440.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p6440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
- /* Common init code for S5P6440 related SoCs */
-
-extern void s5p6440_register_clocks(void);
-extern void s5p6440_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6440
-
-extern int s5p64x0_init(void);
-extern void s5p6440_init_irq(void);
-extern void s5p6440_map_io(void);
-extern void s5p6440_init_clocks(int xtal);
-
-extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6440_init_clocks NULL
-#define s5p6440_init_uarts NULL
-#define s5p6440_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6440 timer */
-
-extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-samsung/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h
deleted file mode 100644
index da25f9a..0000000
--- a/arch/arm/plat-samsung/include/plat/s5p6450.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for s5p6450 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6450 related SoCs */
-
-extern void s5p6450_register_clocks(void);
-extern void s5p6450_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6450
-
-extern int s5p64x0_init(void);
-extern void s5p6450_init_irq(void);
-extern void s5p6450_map_io(void);
-extern void s5p6450_init_clocks(int xtal);
-
-extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6450_init_clocks NULL
-#define s5p6450_init_uarts NULL
-#define s5p6450_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6450 timer */
-
-extern struct sys_timer s5p6450_timer;
diff --git a/arch/arm/plat-samsung/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h
deleted file mode 100644
index 9a21aea..0000000
--- a/arch/arm/plat-samsung/include/plat/s5pc100.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5pc100 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PC100
-
-extern int s5pc100_init(void);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h
deleted file mode 100644
index b4bc6be7..0000000
--- a/arch/arm/plat-samsung/include/plat/s5pv210.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5pv210 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PV210 related SoCs */
-
-extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pv210_register_clocks(void);
-extern void s5pv210_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PV210
-
-extern int s5pv210_init(void);
-extern void s5pv210_init_irq(void);
-extern void s5pv210_map_io(void);
-extern void s5pv210_init_clocks(int xtal);
-
-#define s5pv210_init_uarts s5pv210_common_init_uarts
-
-#else
-#define s5pv210_init_clocks NULL
-#define s5pv210_init_uarts NULL
-#define s5pv210_map_io NULL
-#define s5pv210_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h
deleted file mode 100644
index a448e990..0000000
--- a/arch/arm/plat-samsung/include/plat/system-reset.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/system-reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * S5P - System define for arch_reset()
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/watchdog-reset.h>
-
-void (*s5p_reset_hook)(void);
-
-static void arch_reset(char mode, const char *cmd)
-{
- /* SWRESET support in s5p_reset_hook() */
-
- if (s5p_reset_hook)
- s5p_reset_hook();
-
- /* Perform reset using Watchdog reset
- * if there is no s5p_reset_hook()
- */
-
- arch_wdt_reset();
-}
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 40dbb2b..f19aff1 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/delay.h>
static inline void arch_wdt_reset(void)
{
diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c
index efe1d56..312b510 100644
--- a/arch/arm/plat-samsung/pd.c
+++ b/arch/arm/plat-samsung/pd.c
@@ -11,7 +11,7 @@
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index 4be016e..c2ff92c 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -14,7 +14,7 @@
*/
#include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c
index dc1185d..c559d84 100644
--- a/arch/arm/plat-samsung/pwm.c
+++ b/arch/arm/plat-samsung/pwm.c
@@ -11,7 +11,7 @@
* the Free Software Foundation; either version 2 of the License.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c
index dc81403..20c3d91 100644
--- a/arch/arm/plat-samsung/wakeup-mask.c
+++ b/arch/arm/plat-samsung/wakeup-mask.c
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/spinlock.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/types.h>
#include <linux/irq.h>
#include <linux/io.h>
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index b4f340b..e0f2e5b 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
#
# Common support
-obj-y := clock.o time.o
+obj-y := clock.o restart.o time.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
index a235fa0..86c6f83 100644
--- a/arch/arm/plat-spear/include/plat/system.h
+++ b/arch/arm/plat-spear/include/plat/system.h
@@ -14,10 +14,6 @@
#ifndef __PLAT_SYSTEM_H
#define __PLAT_SYSTEM_H
-#include <linux/io.h>
-#include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
/*
@@ -27,15 +23,4 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- /* software reset, Jump into ROM at address 0 */
- cpu_reset(0);
- } else {
- /* hardware reset, Use on-chip reset capability */
- sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
- }
-}
-
#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
deleted file mode 100644
index 8c8b24d..0000000
--- a/arch/arm/plat-spear/include/plat/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_VMALLOC_H
-#define __PLAT_VMALLOC_H
-
-#define VMALLOC_END 0xF0000000UL
-
-#endif /* __PLAT_VMALLOC_H */
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
new file mode 100644
index 0000000..2b4e3d8
--- /dev/null
+++ b/arch/arm/plat-spear/restart.c
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/plat-spear/restart.c
+ *
+ * SPEAr platform specific restart functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/io.h>
+#include <asm/hardware/sp810.h>
+#include <mach/hardware.h>
+#include <mach/generic.h>
+
+void spear_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* software reset, Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ /* hardware reset, Use on-chip reset capability */
+ sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+ }
+}
diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
deleted file mode 100644
index 1bf4995..0000000
--- a/arch/arm/plat-tcc/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_TCC_926
-
-menu "Telechips ARM926-based CPUs"
-
-choice
- prompt "Telechips CPU type:"
- default ARCH_TCC8K
-
-config ARCH_TCC8K
- bool TCC8000
- select USB_ARCH_HAS_OHCI
- help
- Support for Telechips TCC8000 systems
-
-endchoice
-
-source "arch/arm/mach-tcc8k/Kconfig"
-
-endmenu
-endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
deleted file mode 100644
index eceabc8..0000000
--- a/arch/arm/plat-tcc/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# "Telechips Platform Common Modules"
-
-obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
deleted file mode 100644
index f3ced10..0000000
--- a/arch/arm/plat-tcc/clock.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Clock framework for Telechips SoCs
- * Based on arch/arm/plat-mxc/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2010 Hans J. Koch, hjk@linutronix.de
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
- BUG_ON(clk->refcount == 0);
-
- if (!(--clk->refcount) && clk->disable) {
- /* Unconditionally disable the clock in hardware */
- clk->disable(clk);
- /* recursively disable parents */
- if (clk->parent)
- __clk_disable(clk->parent);
- }
-}
-
-static int __clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->refcount++ == 0 && clk->enable) {
- if (clk->parent)
- ret = __clk_enable(clk->parent);
- if (ret)
- return ret;
- else
- return clk->enable(clk);
- }
-
- return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (!clk)
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = __clk_enable(clk);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
- if (!clk)
- return;
-
- mutex_lock(&clocks_mutex);
- __clk_disable(clk);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (!clk)
- return 0UL;
-
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!clk)
- return 0;
- if (!clk->round_rate)
- return 0;
-
- return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (!clk)
- return ret;
- if (!clk->set_rate || !rate)
- return ret;
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_rate(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk *old;
- int ret = -EINVAL;
-
- if (!clk)
- return ret;
- if (!clk->set_parent || !parent)
- return ret;
-
- mutex_lock(&clocks_mutex);
- old = clk->parent;
- if (clk->refcount)
- __clk_enable(parent);
- ret = clk->set_parent(clk, parent);
- if (ret)
- old = parent;
- if (clk->refcount)
- __clk_disable(old);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (!clk)
- return NULL;
-
- return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
deleted file mode 100644
index a12f58a..0000000
--- a/arch/arm/plat-tcc/include/mach/clock.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Low level clock header file for Telechips TCC architecture
- * (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the GPL v2.
- */
-
-#ifndef __ASM_ARCH_TCC_CLOCK_H__
-#define __ASM_ARCH_TCC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-
-struct clk {
- struct clk *parent;
- /* id number of a root clock, 0 for normal clocks */
- int root_id;
- /* Reference count of clock enable/disable */
- int refcount;
- /* Address of associated BCLKCTRx register. Must be set. */
- void __iomem *bclkctr;
- /* Bit position for BCLKCTRx. Must be set. */
- int bclk_shift;
- /* Address of ACLKxxx register, if any. */
- void __iomem *aclkreg;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
deleted file mode 100644
index cf17d04..0000000
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- .macro addruart, rp, rv, tmp
- moveq \rp, #0x90000000 @ physical base address
- movne \rv, #0xF1000000 @ virtual base
- orr \rp, \rp, #0x00007000 @ UART0
- orr \rv, \rv, #0x00007000 @ UART0
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #0x44]
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1001:
- ldr \rd, [\rx, #0x14]
- tst \rd, #0x20
-
- beq 1001b
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
deleted file mode 100644
index 748f401..0000000
--- a/arch/arm/plat-tcc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-tcc83x/entry-macro.S
- *
- * Author : <linux@telechips.com>
- * Created: June 10, 2008
- * Description: Low-level IRQ helper macros for Telechips-based platforms
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \base, =0xF2003000 @ base address of PIC registers
-
- @@ read MREQ register of PIC0
-
- mov \irqnr, #0
- ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts
- cmp \irqstat, #0
- bne 1001f
-
- @@ read MREQ register of PIC1
-
- ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts
- cmp \irqstat, #0
- beq 1002f
- mov \irqnr, #0x20
-
-1001:
- movs \tmp, \irqstat, lsl #16
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
-
- movs \tmp, \irqstat, lsl #8
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #8
-
- movs \tmp, \irqstat, lsl #4
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #4
-
- movs \tmp, \irqstat, lsl #2
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #2
-
- movs \tmp, \irqstat, lsl #1
- addeq \irqnr, \irqnr, #1
- orrs \base, \base, #1
-1002:
- @@ exit here, Z flag unset if IRQ
-
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
deleted file mode 100644
index e70d126..0000000
--- a/arch/arm/plat-tcc/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- * and Dirk Behme <dirk.behme@de.bosch.com>
- * Rewritten by: <linux@telechips.com>
- * Description: Hardware definitions for TCC8300 processors and boards
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- *
- * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Pulic License version 2.
- */
-
-#ifndef __ASM_ARCH_TCC_HARDWARE_H
-#define __ASM_ARCH_TCC_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#endif
-#include <mach/io.h>
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE 0xfffece00
-#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-/* DPLL control registers */
-#define DPLL_CTL 0xfffecf00
-
-#endif /* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
deleted file mode 100644
index 3e911d3..0000000
--- a/arch/arm/plat-tcc/include/mach/io.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * IO definitions for TCC8000 processors and boards
- *
- * Copyright (C) 1997-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Public License version 2.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
deleted file mode 100644
index da86389..0000000
--- a/arch/arm/plat-tcc/include/mach/irqs.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * IRQ definitions for TCC8xxx
- *
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_TCC_IRQS_H
-#define __ASM_ARCH_TCC_IRQS_H
-
-#define NR_IRQS 64
-
-/* PIC0 interrupts */
-#define INT_ADMA1 0
-#define INT_BDMA 1
-#define INT_ADMA0 2
-#define INT_GDMA1 3
-#define INT_I2S0RX 4
-#define INT_I2S0TX 5
-#define INT_TC 6
-#define INT_UART0 7
-#define INT_USBD 8
-#define INT_SPI0TX 9
-#define INT_UDMA 10
-#define INT_LIRQ 11
-#define INT_GDMA2 12
-#define INT_GDMA0 13
-#define INT_TC32 14
-#define INT_LCD 15
-#define INT_ADC 16
-#define INT_I2C 17
-#define INT_RTCP 18
-#define INT_RTCA 19
-#define INT_NFC 20
-#define INT_SD0 21
-#define INT_GSB0 22
-#define INT_PK 23
-#define INT_USBH0 24
-#define INT_USBH1 25
-#define INT_G2D 26
-#define INT_ECC 27
-#define INT_SPI0RX 28
-#define INT_UART1 29
-#define INT_MSCL 30
-#define INT_GSB1 31
-/* PIC1 interrupts */
-#define INT_E0 32
-#define INT_E1 33
-#define INT_E2 34
-#define INT_E3 35
-#define INT_E4 36
-#define INT_E5 37
-#define INT_E6 38
-#define INT_E7 39
-#define INT_UART2 40
-#define INT_UART3 41
-#define INT_SPI1TX 42
-#define INT_SPI1RX 43
-#define INT_GSB2 44
-#define INT_SPDIF 45
-#define INT_CDIF 46
-#define INT_VBON 47
-#define INT_VBOFF 48
-#define INT_SD1 49
-#define INT_UART4 50
-#define INT_GDMA3 51
-#define INT_I2S1RX 52
-#define INT_I2S1TX 53
-#define INT_CAN0 54
-#define INT_CAN1 55
-#define INT_GSB3 56
-#define INT_KRST 57
-#define INT_UNUSED 58
-#define INT_SD0D3 59
-#define INT_SD1D3 60
-#define INT_GPS0 61
-#define INT_GPS1 62
-#define INT_GPS2 63
-
-#endif /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
deleted file mode 100644
index 909e603..0000000
--- a/arch/arm/plat-tcc/include/mach/system.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- * Description: LINUX SYSTEM FUNCTIONS for TCC83x
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-extern void plat_tcc_reboot(void);
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- plat_tcc_reboot();
-}
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
deleted file mode 100644
index 1d94282..0000000
--- a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Telechips TCC8000 register definitions
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPLv2.
- */
-
-#ifndef TCC8K_REGS_H
-#define TCC8K_REGS_H
-
-#include <linux/types.h>
-
-#define EXT_SDRAM_BASE 0x20000000
-#define INT_SRAM_BASE 0x30000000
-#define INT_SRAM_SIZE SZ_32K
-#define CS0_BASE 0x40000000
-#define CS1_BASE 0x50000000
-#define CS1_SIZE SZ_64K
-#define CS2_BASE 0x60000000
-#define CS3_BASE 0x70000000
-#define AHB_PERI_BASE 0x80000000
-#define AHB_PERI_SIZE SZ_64K
-#define APB0_PERI_BASE 0x90000000
-#define APB0_PERI_SIZE SZ_128K
-#define APB1_PERI_BASE 0x98000000
-#define APB1_PERI_SIZE SZ_128K
-#define DATA_TCM_BASE 0xa0000000
-#define DATA_TCM_SIZE SZ_8K
-#define EXT_MEM_CTRL_BASE 0xf0000000
-#define EXT_MEM_CTRL_SIZE SZ_4K
-
-#define CS1_BASE_VIRT (void __iomem *)0xf7000000
-#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000
-#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000
-#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000
-#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000
-#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000
-#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000
-
-#define __REG(x) (*((volatile u32 *)(x)))
-
-/* USB Device Controller Registers */
-#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000)
-#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000)
-
-#define UDC_IR_OFFS 0x00
-#define UDC_EIR_OFFS 0x04
-#define UDC_EIER_OFFS 0x08
-#define UDC_FAR_OFFS 0x0c
-#define UDC_FNR_OFFS 0x10
-#define UDC_EDR_OFFS 0x14
-#define UDC_RT_OFFS 0x18
-#define UDC_SSR_OFFS 0x1c
-#define UDC_SCR_OFFS 0x20
-#define UDC_EP0SR_OFFS 0x24
-#define UDC_EP0CR_OFFS 0x28
-
-#define UDC_ESR_OFFS 0x2c
-#define UDC_ECR_OFFS 0x30
-#define UDC_BRCR_OFFS 0x34
-#define UDC_BWCR_OFFS 0x38
-#define UDC_MPR_OFFS 0x3c
-#define UDC_DCR_OFFS 0x40
-#define UDC_DTCR_OFFS 0x44
-#define UDC_DFCR_OFFS 0x48
-#define UDC_DTTCR1_OFFS 0x4c
-#define UDC_DTTCR2_OFFS 0x50
-#define UDC_ESR2_OFFS 0x54
-
-#define UDC_SCR2_OFFS 0x58
-#define UDC_EP0BUF_OFFS 0x60
-#define UDC_EP1BUF_OFFS 0x64
-#define UDC_EP2BUF_OFFS 0x68
-#define UDC_EP3BUF_OFFS 0x6c
-#define UDC_PLICR_OFFS 0xa0
-#define UDC_PCR_OFFS 0xa4
-
-#define UDC_UPCR0_OFFS 0xc8
-#define UDC_UPCR1_OFFS 0xcc
-#define UDC_UPCR2_OFFS 0xd0
-#define UDC_UPCR3_OFFS 0xd4
-
-/* Bits in UDC_EIR */
-#define UDC_EIR_EP0I (1 << 0)
-#define UDC_EIR_EP1I (1 << 1)
-#define UDC_EIR_EP2I (1 << 2)
-#define UDC_EIR_EP3I (1 << 3)
-#define UDC_EIR_EPI_MASK 0x0f
-
-/* Bits in UDC_EIER */
-#define UDC_EIER_EP0IE (1 << 0)
-#define UDC_EIER_EP1IE (1 << 1)
-#define UDC_EIER_EP2IE (1 << 2)
-#define UDC_EIER_EP3IE (1 << 3)
-
-/* Bits in UDC_FNR */
-#define UDC_FNR_FN_MASK 0x7ff
-#define UDC_FNR_SM (1 << 13)
-#define UDC_FNR_FTL (1 << 14)
-
-/* Bits in UDC_SSR */
-#define UDC_SSR_HFRES (1 << 0)
-#define UDC_SSR_HFSUSP (1 << 1)
-#define UDC_SSR_HFRM (1 << 2)
-#define UDC_SSR_SDE (1 << 3)
-#define UDC_SSR_HSP (1 << 4)
-#define UDC_SSR_DM (1 << 5)
-#define UDC_SSR_DP (1 << 6)
-#define UDC_SSR_TBM (1 << 7)
-#define UDC_SSR_VBON (1 << 8)
-#define UDC_SSR_VBOFF (1 << 9)
-#define UDC_SSR_EOERR (1 << 10)
-#define UDC_SSR_DCERR (1 << 11)
-#define UDC_SSR_TCERR (1 << 12)
-#define UDC_SSR_BSERR (1 << 13)
-#define UDC_SSR_TMERR (1 << 14)
-#define UDC_SSR_BAERR (1 << 15)
-
-/* Bits in UDC_SCR */
-#define UDC_SCR_HRESE (1 << 0)
-#define UDC_SCR_HSSPE (1 << 1)
-#define UDC_SCR_RRDE (1 << 5)
-#define UDC_SCR_SPDEN (1 << 6)
-#define UDC_SCR_DIEN (1 << 12)
-
-/* Bits in UDC_EP0SR */
-#define UDC_EP0SR_RSR (1 << 0)
-#define UDC_EP0SR_TST (1 << 1)
-#define UDC_EP0SR_SHT (1 << 4)
-#define UDC_EP0SR_LWO (1 << 6)
-
-/* Bits in UDC_EP0CR */
-#define UDC_EP0CR_ESS (1 << 1)
-
-/* Bits in UDC_ESR */
-#define UDC_ESR_RPS (1 << 0)
-#define UDC_ESR_TPS (1 << 1)
-#define UDC_ESR_LWO (1 << 4)
-#define UDC_ESR_FFS (1 << 6)
-
-/* Bits in UDC_ECR */
-#define UDC_ECR_ESS (1 << 1)
-#define UDC_ECR_CDP (1 << 2)
-
-#define UDC_ECR_FLUSH (1 << 6)
-#define UDC_ECR_DUEN (1 << 7)
-
-/* Bits in UDC_UPCR0 */
-#define UDC_UPCR0_VBD (1 << 1)
-#define UDC_UPCR0_VBDS (1 << 6)
-#define UDC_UPCR0_RCD_12 (0x0 << 9)
-#define UDC_UPCR0_RCD_24 (0x1 << 9)
-#define UDC_UPCR0_RCD_48 (0x2 << 9)
-#define UDC_UPCR0_RCS_EXT (0x1 << 11)
-#define UDC_UPCR0_RCS_XTAL (0x0 << 11)
-
-/* Bits in UDC_UPCR1 */
-#define UDC_UPCR1_CDT(x) ((x) << 0)
-#define UDC_UPCR1_OTGT(x) ((x) << 3)
-#define UDC_UPCR1_SQRXT(x) ((x) << 8)
-#define UDC_UPCR1_TXFSLST(x) ((x) << 12)
-
-/* Bits in UDC_UPCR2 */
-#define UDC_UPCR2_TP (1 << 0)
-#define UDC_UPCR2_TXRT(x) ((x) << 2)
-#define UDC_UPCR2_TXVRT(x) ((x) << 5)
-#define UDC_UPCR2_OPMODE(x) ((x) << 9)
-#define UDC_UPCR2_XCVRSEL(x) ((x) << 12)
-#define UDC_UPCR2_TM (1 << 14)
-
-/* USB Host Controller registers */
-#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000)
-#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800)
-
-#define OHCI_INT_ENABLE_OFFS 0x10
-
-#define RH_DESCRIPTOR_A_OFFS 0x48
-#define RH_DESCRIPTOR_B_OFFS 0x4c
-
-#define USBHTCFG0_OFFS 0x100
-#define USBHHCFG0_OFFS 0x104
-#define USBHHCFG1_OFFS 0x104
-
-/* DMA controller registers */
-#define DMAC0_BASE (AHB_PERI_BASE + 0x4000)
-#define DMAC1_BASE (AHB_PERI_BASE + 0xa000)
-#define DMAC2_BASE (AHB_PERI_BASE + 0x4800)
-#define DMAC3_BASE (AHB_PERI_BASE + 0xa800)
-
-#define DMAC_CH_OFFSET(ch) (ch * 0x30)
-
-#define ST_SADR_OFFS 0x00
-#define SPARAM_OFFS 0x04
-#define C_SADR_OFFS 0x0c
-#define ST_DADR_OFFS 0x10
-#define DPARAM_OFFS 0x14
-#define C_DADR_OFFS 0x1c
-#define HCOUNT_OFFS 0x20
-#define CHCTRL_OFFS 0x24
-#define RPTCTRL_OFFS 0x28
-#define EXTREQ_A_OFFS 0x2c
-
-/* Bits in CHCTRL register */
-#define CHCTRL_EN (1 << 0)
-
-#define CHCTRL_IEN (1 << 2)
-#define CHCTRL_FLAG (1 << 3)
-#define CHCTRL_WSIZE8 (0 << 4)
-#define CHCTRL_WSIZE16 (1 << 4)
-#define CHCTRL_WSIZE32 (2 << 4)
-
-#define CHCTRL_BSIZE1 (0 << 6)
-#define CHCTRL_BSIZE2 (1 << 6)
-#define CHCTRL_BSIZE4 (2 << 6)
-#define CHCTRL_BSIZE8 (3 << 6)
-
-#define CHCTRL_TYPE_SINGLE_E (0 << 8)
-#define CHCTRL_TYPE_HW (1 << 8)
-#define CHCTRL_TYPE_SW (2 << 8)
-#define CHCTRL_TYPE_SINGLE_L (3 << 8)
-
-#define CHCTRL_BST (1 << 10)
-
-/* Use DMA controller 0, channel 2 for USB */
-#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2))
-
-/* NAND flash controller registers */
-#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000)
-#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000)
-
-#define NFC_CMD_OFFS 0x00
-#define NFC_LADDR_OFFS 0x04
-#define NFC_BADDR_OFFS 0x08
-#define NFC_SADDR_OFFS 0x0c
-#define NFC_WDATA_OFFS 0x10
-#define NFC_LDATA_OFFS 0x20
-#define NFC_SDATA_OFFS 0x40
-#define NFC_CTRL_OFFS 0x50
-#define NFC_PSTART_OFFS 0x54
-#define NFC_RSTART_OFFS 0x58
-#define NFC_DSIZE_OFFS 0x5c
-#define NFC_IREQ_OFFS 0x60
-#define NFC_RST_OFFS 0x64
-#define NFC_CTRL1_OFFS 0x68
-#define NFC_MDATA_OFFS 0x70
-
-#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS)
-
-/* Bits in NFC_CTRL */
-#define NFC_CTRL_BHLD_MASK (0xf << 0)
-#define NFC_CTRL_BPW_MASK (0xf << 4)
-#define NFC_CTRL_BSTP_MASK (0xf << 8)
-#define NFC_CTRL_CADDR_MASK (0x7 << 12)
-#define NFC_CTRL_CADDR_1 (0x0 << 12)
-#define NFC_CTRL_CADDR_2 (0x1 << 12)
-#define NFC_CTRL_CADDR_3 (0x2 << 12)
-#define NFC_CTRL_CADDR_4 (0x3 << 12)
-#define NFC_CTRL_CADDR_5 (0x4 << 12)
-#define NFC_CTRL_MSK (1 << 15)
-#define NFC_CTRL_PSIZE256 (0 << 16)
-#define NFC_CTRL_PSIZE512 (1 << 16)
-#define NFC_CTRL_PSIZE1024 (2 << 16)
-#define NFC_CTRL_PSIZE2048 (3 << 16)
-#define NFC_CTRL_PSIZE4096 (4 << 16)
-#define NFC_CTRL_PSIZE_MASK (7 << 16)
-#define NFC_CTRL_BSIZE1 (0 << 19)
-#define NFC_CTRL_BSIZE2 (1 << 19)
-#define NFC_CTRL_BSIZE4 (2 << 19)
-#define NFC_CTRL_BSIZE8 (3 << 19)
-#define NFC_CTRL_BSIZE_MASK (3 << 19)
-#define NFC_CTRL_RDY (1 << 21)
-#define NFC_CTRL_CS0SEL (1 << 22)
-#define NFC_CTRL_CS1SEL (1 << 23)
-#define NFC_CTRL_CS2SEL (1 << 24)
-#define NFC_CTRL_CS3SEL (1 << 25)
-#define NFC_CTRL_CSMASK (0xf << 22)
-#define NFC_CTRL_BW (1 << 26)
-#define NFC_CTRL_FS (1 << 27)
-#define NFC_CTRL_DEN (1 << 28)
-#define NFC_CTRL_READ_IEN (1 << 29)
-#define NFC_CTRL_PROG_IEN (1 << 30)
-#define NFC_CTRL_RDY_IEN (1 << 31)
-
-/* Bits in NFC_IREQ */
-#define NFC_IREQ_IRQ0 (1 << 0)
-#define NFC_IREQ_IRQ1 (1 << 1)
-#define NFC_IREQ_IRQ2 (1 << 2)
-
-#define NFC_IREQ_FLAG0 (1 << 4)
-#define NFC_IREQ_FLAG1 (1 << 5)
-#define NFC_IREQ_FLAG2 (1 << 6)
-
-/* MMC controller registers */
-#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000)
-#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800)
-
-/* UART base addresses */
-
-#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000)
-#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000)
-#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000)
-#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000)
-#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000)
-#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000)
-#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000)
-#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000)
-#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000)
-#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000)
-
-#define UART_BASE UART0_BASE
-#define UART_BASE_PHYS UART0_BASE_PHYS
-
-/* ECC controller */
-#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000)
-
-#define ECC_CTRL_OFFS 0x00
-#define ECC_BASE_OFFS 0x04
-#define ECC_MASK_OFFS 0x08
-#define ECC_CLEAR_OFFS 0x0c
-#define ECC4_0_OFFS 0x10
-#define ECC4_1_OFFS 0x14
-
-#define ECC_EADDR0_OFFS 0x50
-
-#define ECC_ERRNUM_OFFS 0x90
-#define ECC_IREQ_OFFS 0x94
-
-/* Bits in ECC_CTRL */
-#define ECC_CTRL_ECC4_DIEN (1 << 28)
-#define ECC_CTRL_ECC8_DIEN (1 << 29)
-#define ECC_CTRL_ECC12_DIEN (1 << 30)
-#define ECC_CTRL_ECC_DISABLE 0x0
-#define ECC_CTRL_ECC_SLC_ENC 0x8
-#define ECC_CTRL_ECC_SLC_DEC 0x9
-#define ECC_CTRL_ECC4_ENC 0xa
-#define ECC_CTRL_ECC4_DEC 0xb
-#define ECC_CTRL_ECC8_ENC 0xc
-#define ECC_CTRL_ECC8_DEC 0xd
-#define ECC_CTRL_ECC12_ENC 0xe
-#define ECC_CTRL_ECC12_DEC 0xf
-
-/* Bits in ECC_IREQ */
-#define ECC_IREQ_E4DI (1 << 4)
-
-#define ECC_IREQ_E4DF (1 << 20)
-#define ECC_IREQ_E4EF (1 << 21)
-
-/* Interrupt controller */
-
-#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000)
-#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000)
-
-#define PIC0_IEN_OFFS 0x00
-#define PIC0_CREQ_OFFS 0x04
-#define PIC0_IREQ_OFFS 0x08
-#define PIC0_IRQSEL_OFFS 0x0c
-#define PIC0_SRC_OFFS 0x10
-#define PIC0_MREQ_OFFS 0x14
-#define PIC0_TSTREQ_OFFS 0x18
-#define PIC0_POL_OFFS 0x1c
-#define PIC0_IRQ_OFFS 0x20
-#define PIC0_FIQ_OFFS 0x24
-#define PIC0_MIRQ_OFFS 0x28
-#define PIC0_MFIQ_OFFS 0x2c
-#define PIC0_TMODE_OFFS 0x30
-#define PIC0_SYNC_OFFS 0x34
-#define PIC0_WKUP_OFFS 0x38
-#define PIC0_TMODEA_OFFS 0x3c
-#define PIC0_INTOEN_OFFS 0x40
-#define PIC0_MEN0_OFFS 0x44
-#define PIC0_MEN_OFFS 0x48
-
-#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS)
-#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
-#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS)
-#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
-#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS)
-#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
-#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
-#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS)
-#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS)
-#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
-#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS)
-#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS)
-#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS)
-#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS)
-#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS)
-#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS)
-#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
-#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS)
-#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS)
-#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS)
-#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS)
-#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS)
-#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS)
-
-#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080)
-
-#define PIC1_IEN_OFFS 0x00
-#define PIC1_CREQ_OFFS 0x04
-#define PIC1_IREQ_OFFS 0x08
-#define PIC1_IRQSEL_OFFS 0x0c
-#define PIC1_SRC_OFFS 0x10
-#define PIC1_MREQ_OFFS 0x14
-#define PIC1_TSTREQ_OFFS 0x18
-#define PIC1_POL_OFFS 0x1c
-#define PIC1_IRQ_OFFS 0x20
-#define PIC1_FIQ_OFFS 0x24
-#define PIC1_MIRQ_OFFS 0x28
-#define PIC1_MFIQ_OFFS 0x2c
-#define PIC1_TMODE_OFFS 0x30
-#define PIC1_SYNC_OFFS 0x34
-#define PIC1_WKUP_OFFS 0x38
-#define PIC1_TMODEA_OFFS 0x3c
-#define PIC1_INTOEN_OFFS 0x40
-#define PIC1_MEN1_OFFS 0x44
-#define PIC1_MEN_OFFS 0x48
-
-#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS)
-#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS)
-#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS)
-#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
-#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS)
-#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS)
-#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
-#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS)
-#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS)
-#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS)
-#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS)
-#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS)
-#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS)
-#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS)
-#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS)
-#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS)
-#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS)
-#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS)
-#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS)
-
-/* Timer registers */
-#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000)
-#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000)
-
-#define TWDCFG_OFFS 0x70
-
-#define TC32EN_OFFS 0x80
-#define TC32LDV_OFFS 0x84
-#define TC32CMP0_OFFS 0x88
-#define TC32CMP1_OFFS 0x8c
-#define TC32PCNT_OFFS 0x90
-#define TC32MCNT_OFFS 0x94
-#define TC32IRQ_OFFS 0x98
-
-/* Bits in TC32EN */
-#define TC32EN_PRESCALE_MASK 0x00ffffff
-#define TC32EN_ENABLE (1 << 24)
-#define TC32EN_LOADZERO (1 << 25)
-#define TC32EN_STOPMODE (1 << 26)
-#define TC32EN_LDM0 (1 << 28)
-#define TC32EN_LDM1 (1 << 29)
-
-/* Bits in TC32IRQ */
-#define TC32IRQ_MSTAT_MASK 0x0000001f
-#define TC32IRQ_RSTAT_MASK (0x1f << 8)
-#define TC32IRQ_IRQEN0 (1 << 16)
-#define TC32IRQ_IRQEN1 (1 << 17)
-#define TC32IRQ_IRQEN2 (1 << 18)
-#define TC32IRQ_IRQEN3 (1 << 19)
-#define TC32IRQ_IRQEN4 (1 << 20)
-#define TC32IRQ_RSYNC (1 << 30)
-#define TC32IRQ_IRQCLR (1 << 31)
-
-/* GPIO registers */
-#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPD_DAT_OFFS 0x00
-#define GPIOPD_DOE_OFFS 0x04
-#define GPIOPD_FS0_OFFS 0x08
-#define GPIOPD_FS1_OFFS 0x0c
-#define GPIOPD_FS2_OFFS 0x10
-#define GPIOPD_RPU_OFFS 0x30
-#define GPIOPD_RPD_OFFS 0x34
-#define GPIOPD_DV0_OFFS 0x38
-#define GPIOPD_DV1_OFFS 0x3c
-
-#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPS_DAT_OFFS 0x40
-#define GPIOPS_DOE_OFFS 0x44
-#define GPIOPS_FS0_OFFS 0x48
-#define GPIOPS_FS1_OFFS 0x4c
-#define GPIOPS_FS2_OFFS 0x50
-#define GPIOPS_FS3_OFFS 0x54
-#define GPIOPS_RPU_OFFS 0x70
-#define GPIOPS_RPD_OFFS 0x74
-#define GPIOPS_DV0_OFFS 0x78
-#define GPIOPS_DV1_OFFS 0x7c
-
-#define GPIOPS_FS1_SDH0_BITS 0x000000ff
-#define GPIOPS_FS1_SDH1_BITS 0x0000ff00
-
-#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPU_DAT_OFFS 0x80
-#define GPIOPU_DOE_OFFS 0x84
-#define GPIOPU_FS0_OFFS 0x88
-#define GPIOPU_FS1_OFFS 0x8c
-#define GPIOPU_FS2_OFFS 0x90
-#define GPIOPU_RPU_OFFS 0xb0
-#define GPIOPU_RPD_OFFS 0xb4
-#define GPIOPU_DV0_OFFS 0xb8
-#define GPIOPU_DV1_OFFS 0xbc
-
-#define GPIOPU_FS0_TXD0 (1 << 0)
-#define GPIOPU_FS0_RXD0 (1 << 1)
-#define GPIOPU_FS0_CTS0 (1 << 2)
-#define GPIOPU_FS0_RTS0 (1 << 3)
-#define GPIOPU_FS0_TXD1 (1 << 4)
-#define GPIOPU_FS0_RXD1 (1 << 5)
-#define GPIOPU_FS0_CTS1 (1 << 6)
-#define GPIOPU_FS0_RTS1 (1 << 7)
-#define GPIOPU_FS0_TXD2 (1 << 8)
-#define GPIOPU_FS0_RXD2 (1 << 9)
-#define GPIOPU_FS0_CTS2 (1 << 10)
-#define GPIOPU_FS0_RTS2 (1 << 11)
-#define GPIOPU_FS0_TXD3 (1 << 12)
-#define GPIOPU_FS0_RXD3 (1 << 13)
-#define GPIOPU_FS0_CTS3 (1 << 14)
-#define GPIOPU_FS0_RTS3 (1 << 15)
-#define GPIOPU_FS0_TXD4 (1 << 16)
-#define GPIOPU_FS0_RXD4 (1 << 17)
-#define GPIOPU_FS0_CTS4 (1 << 18)
-#define GPIOPU_FS0_RTS4 (1 << 19)
-
-#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFC_DAT_OFFS 0xc0
-#define GPIOFC_DOE_OFFS 0xc4
-#define GPIOFC_FS0_OFFS 0xc8
-#define GPIOFC_FS1_OFFS 0xcc
-#define GPIOFC_FS2_OFFS 0xd0
-#define GPIOFC_FS3_OFFS 0xd4
-#define GPIOFC_RPU_OFFS 0xf0
-#define GPIOFC_RPD_OFFS 0xf4
-#define GPIOFC_DV0_OFFS 0xf8
-#define GPIOFC_DV1_OFFS 0xfc
-
-#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFD_DAT_OFFS 0x100
-#define GPIOFD_DOE_OFFS 0x104
-#define GPIOFD_FS0_OFFS 0x108
-#define GPIOFD_FS1_OFFS 0x10c
-#define GPIOFD_FS2_OFFS 0x110
-#define GPIOFD_RPU_OFFS 0x130
-#define GPIOFD_RPD_OFFS 0x134
-#define GPIOFD_DV0_OFFS 0x138
-#define GPIOFD_DV1_OFFS 0x13c
-
-#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLC_DAT_OFFS 0x140
-#define GPIOLC_DOE_OFFS 0x144
-#define GPIOLC_FS0_OFFS 0x148
-#define GPIOLC_FS1_OFFS 0x14c
-#define GPIOLC_RPU_OFFS 0x170
-#define GPIOLC_RPD_OFFS 0x174
-#define GPIOLC_DV0_OFFS 0x178
-#define GPIOLC_DV1_OFFS 0x17c
-
-#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLD_DAT_OFFS 0x180
-#define GPIOLD_DOE_OFFS 0x184
-#define GPIOLD_FS0_OFFS 0x188
-#define GPIOLD_FS1_OFFS 0x18c
-#define GPIOLD_FS2_OFFS 0x190
-#define GPIOLD_RPU_OFFS 0x1b0
-#define GPIOLD_RPD_OFFS 0x1b4
-#define GPIOLD_DV0_OFFS 0x1b8
-#define GPIOLD_DV1_OFFS 0x1bc
-
-#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOAD_DAT_OFFS 0x1c0
-#define GPIOAD_DOE_OFFS 0x1c4
-#define GPIOAD_FS0_OFFS 0x1c8
-#define GPIOAD_RPU_OFFS 0x1f0
-#define GPIOAD_RPD_OFFS 0x1f4
-#define GPIOAD_DV0_OFFS 0x1f8
-#define GPIOAD_DV1_OFFS 0x1fc
-
-#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXC_DAT_OFFS 0x200
-#define GPIOXC_DOE_OFFS 0x204
-#define GPIOXC_FS0_OFFS 0x208
-#define GPIOXC_RPU_OFFS 0x230
-#define GPIOXC_RPD_OFFS 0x234
-#define GPIOXC_DV0_OFFS 0x238
-#define GPIOXC_DV1_OFFS 0x23c
-
-#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
-
-#define GPIOXC_FS0_CS0 (1 << 26)
-#define GPIOXC_FS0_CS1 (1 << 27)
-
-#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXD_DAT_OFFS 0x240
-#define GPIOXD_FS0_OFFS 0x248
-#define GPIOXD_RPU_OFFS 0x270
-#define GPIOXD_RPD_OFFS 0x274
-#define GPIOXD_DV0_OFFS 0x278
-#define GPIOXD_DV1_OFFS 0x27c
-
-#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000)
-
-#define GPIOPK_RST_OFFS 0x008
-#define GPIOPK_DAT_OFFS 0x100
-#define GPIOPK_DOE_OFFS 0x104
-#define GPIOPK_FS0_OFFS 0x108
-#define GPIOPK_FS1_OFFS 0x10c
-#define GPIOPK_FS2_OFFS 0x110
-#define GPIOPK_IRQST_OFFS 0x210
-#define GPIOPK_IRQEN_OFFS 0x214
-#define GPIOPK_IRQPOL_OFFS 0x218
-#define GPIOPK_IRQTM0_OFFS 0x21c
-#define GPIOPK_IRQTM1_OFFS 0x220
-#define GPIOPK_CTL_OFFS 0x22c
-
-#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000)
-#define BACKUP_RAM_BASE PMGPIO_BASE
-
-#define PMGPIO_DAT_OFFS 0x800
-#define PMGPIO_DOE_OFFS 0x804
-#define PMGPIO_FS0_OFFS 0x808
-#define PMGPIO_RPU_OFFS 0x810
-#define PMGPIO_RPD_OFFS 0x814
-#define PMGPIO_DV0_OFFS 0x818
-#define PMGPIO_DV1_OFFS 0x81c
-#define PMGPIO_EE0_OFFS 0x820
-#define PMGPIO_EE1_OFFS 0x824
-#define PMGPIO_CTL_OFFS 0x828
-#define PMGPIO_DI_OFFS 0x82c
-#define PMGPIO_STR_OFFS 0x830
-#define PMGPIO_STF_OFFS 0x834
-#define PMGPIO_POL_OFFS 0x838
-#define PMGPIO_APB_OFFS 0x800
-
-/* Clock controller registers */
-#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
-
-#define CLKCTRL_OFFS 0x00
-#define PLL0CFG_OFFS 0x04
-#define PLL1CFG_OFFS 0x08
-#define CLKDIVC0_OFFS 0x0c
-
-#define BCLKCTR0_OFFS 0x14
-#define SWRESET0_OFFS 0x18
-
-#define BCLKCTR1_OFFS 0x60
-#define SWRESET1_OFFS 0x64
-#define PWDCTL_OFFS 0x68
-#define PLL2CFG_OFFS 0x6c
-#define CLKDIVC1_OFFS 0x70
-
-#define ACLKREF_OFFS 0x80
-#define ACLKI2C_OFFS 0x84
-#define ACLKSPI0_OFFS 0x88
-#define ACLKSPI1_OFFS 0x8c
-#define ACLKUART0_OFFS 0x90
-#define ACLKUART1_OFFS 0x94
-#define ACLKUART2_OFFS 0x98
-#define ACLKUART3_OFFS 0x9c
-#define ACLKUART4_OFFS 0xa0
-#define ACLKTCT_OFFS 0xa4
-#define ACLKTCX_OFFS 0xa8
-#define ACLKTCZ_OFFS 0xac
-#define ACLKADC_OFFS 0xb0
-#define ACLKDAI0_OFFS 0xb4
-#define ACLKDAI1_OFFS 0xb8
-#define ACLKLCD_OFFS 0xbc
-#define ACLKSPDIF_OFFS 0xc0
-#define ACLKUSBH_OFFS 0xc4
-#define ACLKSDH0_OFFS 0xc8
-#define ACLKSDH1_OFFS 0xcc
-#define ACLKC3DEC_OFFS 0xd0
-#define ACLKEXT_OFFS 0xd4
-#define ACLKCAN0_OFFS 0xd8
-#define ACLKCAN1_OFFS 0xdc
-#define ACLKGSB0_OFFS 0xe0
-#define ACLKGSB1_OFFS 0xe4
-#define ACLKGSB2_OFFS 0xe8
-#define ACLKGSB3_OFFS 0xec
-
-#define PLLxCFG_PD (1 << 31)
-
-/* CLKCTRL bits */
-#define CLKCTRL_XE (1 << 31)
-
-/* CLKDIVCx bits */
-#define CLKDIVC0_XTE (1 << 7)
-#define CLKDIVC0_XE (1 << 15)
-#define CLKDIVC0_P1E (1 << 23)
-#define CLKDIVC0_P0E (1 << 31)
-
-#define CLKDIVC1_P2E (1 << 7)
-
-/* BCLKCTR0 clock bits */
-#define BCLKCTR0_USBD (1 << 4)
-#define BCLKCTR0_ECC (1 << 9)
-#define BCLKCTR0_USBH0 (1 << 11)
-#define BCLKCTR0_NFC (1 << 16)
-
-/* BCLKCTR1 clock bits */
-#define BCLKCTR1_USBH1 (1 << 20)
-
-/* SWRESET0 bits */
-#define SWRESET0_USBD (1 << 4)
-#define SWRESET0_USBH0 (1 << 11)
-
-/* SWRESET1 bits */
-#define SWRESET1_USBH1 (1 << 20)
-
-/* System clock sources.
- * Note: These are the clock sources that serve as parents for
- * all other clocks. They have no parents themselves.
- *
- * These values are used for struct clk->root_id. All clocks
- * that are not system clock sources have this value set to
- * CLK_SRC_NOROOT.
- * The values for system clocks start with CLK_SRC_PLL0 == 0
- * because this gives us exactly the values needed for the lower
- * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
- * defined as -1 to not disturb the order.
- */
-enum root_clks {
- CLK_SRC_NOROOT = -1,
- CLK_SRC_PLL0 = 0,
- CLK_SRC_PLL1,
- CLK_SRC_PLL0DIV,
- CLK_SRC_PLL1DIV,
- CLK_SRC_XI,
- CLK_SRC_XIDIV,
- CLK_SRC_XTI,
- CLK_SRC_XTIDIV,
- CLK_SRC_PLL2,
- CLK_SRC_PLL2DIV,
- CLK_SRC_PK0,
- CLK_SRC_PK1,
- CLK_SRC_PK2,
- CLK_SRC_PK3,
- CLK_SRC_PK4,
- CLK_SRC_48MHZ
-};
-
-#define CLK_SRC_MASK 0xf
-
-/* Bits in ACLK* registers */
-#define ACLK_EN (1 << 28)
-#define ACLK_SEL_SHIFT 24
-#define ACLK_SEL_MASK 0x0f000000
-#define ACLK_DIV_MASK 0x00000fff
-
-/* System configuration registers */
-
-#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000)
-
-#define BMI_OFFS 0x00
-#define AHBCON0_OFFS 0x04
-#define APBPWE_OFFS 0x08
-#define DTCMWAIT_OFFS 0x0c
-#define ECCSEL_OFFS 0x10
-#define AHBCON1_OFFS 0x14
-#define SDHCFG_OFFS 0x18
-#define REMAP_OFFS 0x20
-#define LCDSIAE_OFFS 0x24
-#define XMCCFG_OFFS 0xe0
-#define IMCCFG_OFFS 0xe4
-
-/* Values for ECCSEL */
-#define ECCSEL_EXTMEM 0x0
-#define ECCSEL_DTCM 0x1
-#define ECCSEL_INT_SRAM 0x2
-#define ECCSEL_AHB 0x3
-
-/* Bits in XMCCFG */
-#define XMCCFG_NFCE (1 << 1)
-#define XMCCFG_FDXD (1 << 2)
-
-/* External memory controller registers */
-
-#define EMC_BASE EXT_MEM_CTRL_BASE
-
-#define SDCFG_OFFS 0x00
-#define SDFSM_OFFS 0x04
-#define MCFG_OFFS 0x08
-
-#define CSCFG0_OFFS 0x10
-#define CSCFG1_OFFS 0x14
-#define CSCFG2_OFFS 0x18
-#define CSCFG3_OFFS 0x1c
-
-#define MCFG_SDEN (1 << 4)
-
-#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
deleted file mode 100644
index 057acbe..0000000
--- a/arch/arm/plat-tcc/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * A definition needed by arch core code.
- *
- */
-#define CLOCK_TICK_RATE (HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
deleted file mode 100644
index 7a3e33a..0000000
--- a/arch/arm/plat-tcc/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This file is licensed under the terms of the GPL version 2.
- */
-
-#include <linux/serial_reg.h>
-#include <linux/types.h>
-
-#include <mach/tcc8k-regs.h>
-
-unsigned int system_rev;
-
-#define ID_MASK 0x7fff
-
-static void putc(int c)
-{
- u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
- u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
-
- while (!(*uart_lsr & UART_LSR_THRE))
- barrier();
- *uart_tx = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
deleted file mode 100644
index 99414d9..0000000
--- a/arch/arm/plat-tcc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- *
- * Copyright (C) 2000 Russell King.
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- */
-#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
deleted file mode 100644
index cc208fa..0000000
--- a/arch/arm/plat-tcc/system.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * System functions for Telechips TCCxxxx SoCs
- *
- * Copyright (C) Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#include <linux/io.h>
-
-#include <mach/tcc8k-regs.h>
-
-/* System reboot */
-void plat_tcc_reboot(void)
-{
- /* Make sure clocks are on */
- __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
-
- /* Enable watchdog reset */
- __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
- /* Wait for reset */
- while(1)
- ;
-}
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
index 3d6a4c2..b33b74c 100644
--- a/arch/arm/plat-versatile/sched-clock.c
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -18,41 +18,24 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include <linux/io.h>
-#include <linux/sched.h>
#include <asm/sched_clock.h>
#include <plat/sched_clock.h>
-static DEFINE_CLOCK_DATA(cd);
static void __iomem *ctr;
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60).
- * This gives a resolution of about 41ns and a wrap period of about 178s.
- */
-#define SC_MULT 2796202667u
-#define SC_SHIFT 26
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace versatile_read_sched_clock(void)
{
- if (ctr) {
- u32 cyc = readl(ctr);
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0,
- SC_MULT, SC_SHIFT);
- } else
- return 0;
-}
+ if (ctr)
+ return readl(ctr);
-static void notrace versatile_update_sched_clock(void)
-{
- u32 cyc = readl(ctr);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return 0;
}
void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate)
{
ctr = reg;
- init_fixed_sched_clock(&cd, versatile_update_sched_clock,
- 32, rate, SC_MULT, SC_SHIFT);
+ setup_sched_clock(versatile_read_sched_clock, 32, rate);
}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 5bdeef9..f9c9f33 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -16,7 +16,7 @@
# are merged into mainline or have been edited in the machine database
# within the last 12 months. References to machine_is_NAME() do not count!
#
-# Last update: Sat May 7 08:48:24 2011
+# Last update: Tue Dec 6 11:07:38 2011
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -269,7 +269,7 @@
omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546
nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548
pcm038 MACH_PCM038 PCM038 1551
-ts_x09 MACH_TS209 TS209 1565
+ts209 MACH_TS209 TS209 1565
at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566
mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574
vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578
@@ -321,7 +321,6 @@
mx25_3ds MACH_MX25_3DS MX25_3DS 1771
omap3530_lv_som MACH_OMAP3530_LV_SOM OMAP3530_LV_SOM 1773
davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781
-at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783
dove_db MACH_DOVE_DB DOVE_DB 1788
overo MACH_OVERO OVERO 1798
at2440evb MACH_AT2440EVB AT2440EVB 1799
@@ -459,7 +458,7 @@
spear310 MACH_SPEAR310 SPEAR310 2660
spear320 MACH_SPEAR320 SPEAR320 2661
aquila MACH_AQUILA AQUILA 2676
-sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
+esata_sheevaplug MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679
ea2478devkit MACH_EA2478DEVKIT EA2478DEVKIT 2683
terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697
@@ -491,380 +490,53 @@
eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822
eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823
smdkc210 MACH_SMDKC210 SMDKC210 2838
-omap3_braillo MACH_OMAP3_BRAILLO OMAP3_BRAILLO 2839
-spyplug MACH_SPYPLUG SPYPLUG 2840
-ginger MACH_GINGER GINGER 2841
-tny_t3530 MACH_TNY_T3530 TNY_T3530 2842
pca102 MACH_PCA102 PCA102 2843
-spade MACH_SPADE SPADE 2844
-mxc25_topaz MACH_MXC25_TOPAZ MXC25_TOPAZ 2845
t5325 MACH_T5325 T5325 2846
-gw2361 MACH_GW2361 GW2361 2847
-elog MACH_ELOG ELOG 2848
income MACH_INCOME INCOME 2849
-bcm589x MACH_BCM589X BCM589X 2850
-etna MACH_ETNA ETNA 2851
-hawks MACH_HAWKS HAWKS 2852
-meson MACH_MESON MESON 2853
-xsbase255 MACH_XSBASE255 XSBASE255 2854
-pvm2030 MACH_PVM2030 PVM2030 2855
-mioa502 MACH_MIOA502 MIOA502 2856
vvbox_sdorig2 MACH_VVBOX_SDORIG2 VVBOX_SDORIG2 2857
vvbox_sdlite2 MACH_VVBOX_SDLITE2 VVBOX_SDLITE2 2858
vvbox_sdpro4 MACH_VVBOX_SDPRO4 VVBOX_SDPRO4 2859
-htc_spv_m700 MACH_HTC_SPV_M700 HTC_SPV_M700 2860
mx257sx MACH_MX257SX MX257SX 2861
goni MACH_GONI GONI 2862
-msm8x55_svlte_ffa MACH_MSM8X55_SVLTE_FFA MSM8X55_SVLTE_FFA 2863
-msm8x55_svlte_surf MACH_MSM8X55_SVLTE_SURF MSM8X55_SVLTE_SURF 2864
-quickstep MACH_QUICKSTEP QUICKSTEP 2865
-dmw96 MACH_DMW96 DMW96 2866
-hammerhead MACH_HAMMERHEAD HAMMERHEAD 2867
-trident MACH_TRIDENT TRIDENT 2868
-lightning MACH_LIGHTNING LIGHTNING 2869
-iconnect MACH_ICONNECT ICONNECT 2870
-autobot MACH_AUTOBOT AUTOBOT 2871
-coconut MACH_COCONUT COCONUT 2872
-durian MACH_DURIAN DURIAN 2873
-cayenne MACH_CAYENNE CAYENNE 2874
-fuji MACH_FUJI FUJI 2875
-synology_6282 MACH_SYNOLOGY_6282 SYNOLOGY_6282 2876
-em1sy MACH_EM1SY EM1SY 2877
-m502 MACH_M502 M502 2878
-matrix518 MACH_MATRIX518 MATRIX518 2879
-tiny_gurnard MACH_TINY_GURNARD TINY_GURNARD 2880
-spear1310 MACH_SPEAR1310 SPEAR1310 2881
bv07 MACH_BV07 BV07 2882
-mxt_td61 MACH_MXT_TD61 MXT_TD61 2883
openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884
devixp MACH_DEVIXP DEVIXP 2885
miccpt MACH_MICCPT MICCPT 2886
mic256 MACH_MIC256 MIC256 2887
-as1167 MACH_AS1167 AS1167 2888
-omap3_ibiza MACH_OMAP3_IBIZA OMAP3_IBIZA 2889
u5500 MACH_U5500 U5500 2890
-davinci_picto MACH_DAVINCI_PICTO DAVINCI_PICTO 2891
-mecha MACH_MECHA MECHA 2892
-bubba3 MACH_BUBBA3 BUBBA3 2893
-pupitre MACH_PUPITRE PUPITRE 2894
-tegra_vogue MACH_TEGRA_VOGUE TEGRA_VOGUE 2896
-tegra_e1165 MACH_TEGRA_E1165 TEGRA_E1165 2897
-simplenet MACH_SIMPLENET SIMPLENET 2898
-ec4350tbm MACH_EC4350TBM EC4350TBM 2899
-pec_tc MACH_PEC_TC PEC_TC 2900
-pec_hc2 MACH_PEC_HC2 PEC_HC2 2901
-esl_mobilis_a MACH_ESL_MOBILIS_A ESL_MOBILIS_A 2902
-esl_mobilis_b MACH_ESL_MOBILIS_B ESL_MOBILIS_B 2903
-esl_wave_a MACH_ESL_WAVE_A ESL_WAVE_A 2904
-esl_wave_b MACH_ESL_WAVE_B ESL_WAVE_B 2905
-unisense_mmm MACH_UNISENSE_MMM UNISENSE_MMM 2906
-blueshark MACH_BLUESHARK BLUESHARK 2907
-e10 MACH_E10 E10 2908
-app3k_robin MACH_APP3K_ROBIN APP3K_ROBIN 2909
-pov15hd MACH_POV15HD POV15HD 2910
-stella MACH_STELLA STELLA 2911
linkstation_lschl MACH_LINKSTATION_LSCHL LINKSTATION_LSCHL 2913
-netwalker MACH_NETWALKER NETWALKER 2914
-acsx106 MACH_ACSX106 ACSX106 2915
-atlas5_c1 MACH_ATLAS5_C1 ATLAS5_C1 2916
-nsb3ast MACH_NSB3AST NSB3AST 2917
-gnet_slc MACH_GNET_SLC GNET_SLC 2918
-af4000 MACH_AF4000 AF4000 2919
-ark9431 MACH_ARK9431 ARK9431 2920
-fs_s5pc100 MACH_FS_S5PC100 FS_S5PC100 2921
-omap3505nova8 MACH_OMAP3505NOVA8 OMAP3505NOVA8 2922
-omap3621_edp1 MACH_OMAP3621_EDP1 OMAP3621_EDP1 2923
-oratisaes MACH_ORATISAES ORATISAES 2924
smdkv310 MACH_SMDKV310 SMDKV310 2925
-siemens_l0 MACH_SIEMENS_L0 SIEMENS_L0 2926
-ventana MACH_VENTANA VENTANA 2927
wm8505_7in_netbook MACH_WM8505_7IN_NETBOOK WM8505_7IN_NETBOOK 2928
-ec4350sdb MACH_EC4350SDB EC4350SDB 2929
-mimas MACH_MIMAS MIMAS 2930
-titan MACH_TITAN TITAN 2931
craneboard MACH_CRANEBOARD CRANEBOARD 2932
-es2440 MACH_ES2440 ES2440 2933
-najay_a9263 MACH_NAJAY_A9263 NAJAY_A9263 2934
-htctornado MACH_HTCTORNADO HTCTORNADO 2935
-dimm_mx257 MACH_DIMM_MX257 DIMM_MX257 2936
-jigen301 MACH_JIGEN JIGEN 2937
smdk6450 MACH_SMDK6450 SMDK6450 2938
-meno_qng MACH_MENO_QNG MENO_QNG 2939
-ns2416 MACH_NS2416 NS2416 2940
-rpc353 MACH_RPC353 RPC353 2941
-tq6410 MACH_TQ6410 TQ6410 2942
-sky6410 MACH_SKY6410 SKY6410 2943
-dynasty MACH_DYNASTY DYNASTY 2944
-vivo MACH_VIVO VIVO 2945
-bury_bl7582 MACH_BURY_BL7582 BURY_BL7582 2946
-bury_bps5270 MACH_BURY_BPS5270 BURY_BPS5270 2947
-basi MACH_BASI BASI 2948
-tn200 MACH_TN200 TN200 2949
-c2mmi MACH_C2MMI C2MMI 2950
-meson_6236m MACH_MESON_6236M MESON_6236M 2951
-meson_8626m MACH_MESON_8626M MESON_8626M 2952
-tube MACH_TUBE TUBE 2953
-messina MACH_MESSINA MESSINA 2954
-mx50_arm2 MACH_MX50_ARM2 MX50_ARM2 2955
-cetus9263 MACH_CETUS9263 CETUS9263 2956
brownstone MACH_BROWNSTONE BROWNSTONE 2957
-vmx25 MACH_VMX25 VMX25 2958
-vmx51 MACH_VMX51 VMX51 2959
-abacus MACH_ABACUS ABACUS 2960
-cm4745 MACH_CM4745 CM4745 2961
-oratislink MACH_ORATISLINK ORATISLINK 2962
-davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963
-netviz MACH_NETVIZ NETVIZ 2964
flexibity MACH_FLEXIBITY FLEXIBITY 2965
-wlan_computer MACH_WLAN_COMPUTER WLAN_COMPUTER 2966
-lpc24xx MACH_LPC24XX LPC24XX 2967
-spica MACH_SPICA SPICA 2968
-gpsdisplay MACH_GPSDISPLAY GPSDISPLAY 2969
-bipnet MACH_BIPNET BIPNET 2970
-overo_ctu_inertial MACH_OVERO_CTU_INERTIAL OVERO_CTU_INERTIAL 2971
-davinci_dm355_mmm MACH_DAVINCI_DM355_MMM DAVINCI_DM355_MMM 2972
-pc9260_v2 MACH_PC9260_V2 PC9260_V2 2973
-ptx7545 MACH_PTX7545 PTX7545 2974
-tm_efdc MACH_TM_EFDC TM_EFDC 2975
-omap3_waldo1 MACH_OMAP3_WALDO1 OMAP3_WALDO1 2977
-flyer MACH_FLYER FLYER 2978
-tornado3240 MACH_TORNADO3240 TORNADO3240 2979
-soli_01 MACH_SOLI_01 SOLI_01 2980
-omapl138_europalc MACH_OMAPL138_EUROPALC OMAPL138_EUROPALC 2981
-helios_v1 MACH_HELIOS_V1 HELIOS_V1 2982
-netspace_lite_v2 MACH_NETSPACE_LITE_V2 NETSPACE_LITE_V2 2983
-ssc MACH_SSC SSC 2984
-premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985
-wasabi MACH_WASABI WASABI 2986
mx50_rdp MACH_MX50_RDP MX50_RDP 2988
universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989
real6410 MACH_REAL6410 REAL6410 2990
-spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991
-ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992
-omap3_bc10 MACH_OMAP3_BC10 OMAP3_BC10 2993
-thebe MACH_THEBE THEBE 2994
-rv082 MACH_RV082 RV082 2995
-armlguest MACH_ARMLGUEST ARMLGUEST 2996
-tjinc1000 MACH_TJINC1000 TJINC1000 2997
dockstar MACH_DOCKSTAR DOCKSTAR 2998
-ax8008 MACH_AX8008 AX8008 2999
-gnet_sgce MACH_GNET_SGCE GNET_SGCE 3000
-pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001
-ea20 MACH_EA20 EA20 3002
-awm2 MACH_AWM2 AWM2 3003
ti8148evm MACH_TI8148EVM TI8148EVM 3004
seaboard MACH_SEABOARD SEABOARD 3005
-linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006
-tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007
-rubys MACH_RUBYS RUBYS 3008
-aquarius MACH_AQUARIUS AQUARIUS 3009
mx53_ard MACH_MX53_ARD MX53_ARD 3010
mx53_smd MACH_MX53_SMD MX53_SMD 3011
-lswxl MACH_LSWXL LSWXL 3012
-dove_avng_v3 MACH_DOVE_AVNG_V3 DOVE_AVNG_V3 3013
-sdi_ess_9263 MACH_SDI_ESS_9263 SDI_ESS_9263 3014
-jocpu550 MACH_JOCPU550 JOCPU550 3015
msm8x60_rumi3 MACH_MSM8X60_RUMI3 MSM8X60_RUMI3 3016
msm8x60_ffa MACH_MSM8X60_FFA MSM8X60_FFA 3017
-yanomami MACH_YANOMAMI YANOMAMI 3018
-gta04 MACH_GTA04 GTA04 3019
cm_a510 MACH_CM_A510 CM_A510 3020
-omap3_rfs200 MACH_OMAP3_RFS200 OMAP3_RFS200 3021
-kx33xx MACH_KX33XX KX33XX 3022
-ptx7510 MACH_PTX7510 PTX7510 3023
-top9000 MACH_TOP9000 TOP9000 3024
-teenote MACH_TEENOTE TEENOTE 3025
-ts3 MACH_TS3 TS3 3026
-a0 MACH_A0 A0 3027
-fsm9xxx_surf MACH_FSM9XXX_SURF FSM9XXX_SURF 3028
-fsm9xxx_ffa MACH_FSM9XXX_FFA FSM9XXX_FFA 3029
-frrhwcdma60w MACH_FRRHWCDMA60W FRRHWCDMA60W 3030
-remus MACH_REMUS REMUS 3031
-at91cap7xdk MACH_AT91CAP7XDK AT91CAP7XDK 3032
-at91cap7stk MACH_AT91CAP7STK AT91CAP7STK 3033
-kt_sbc_sam9_1 MACH_KT_SBC_SAM9_1 KT_SBC_SAM9_1 3034
-armada_xp_db MACH_ARMADA_XP_DB ARMADA_XP_DB 3036
-spdm MACH_SPDM SPDM 3037
-gtib MACH_GTIB GTIB 3038
-dgm3240 MACH_DGM3240 DGM3240 3039
-htcmega MACH_HTCMEGA HTCMEGA 3041
-tricorder MACH_TRICORDER TRICORDER 3042
tx28 MACH_TX28 TX28 3043
-bstbrd MACH_BSTBRD BSTBRD 3044
-pwb3090 MACH_PWB3090 PWB3090 3045
-idea6410 MACH_IDEA6410 IDEA6410 3046
-qbc9263 MACH_QBC9263 QBC9263 3047
-borabora MACH_BORABORA BORABORA 3048
-valdez MACH_VALDEZ VALDEZ 3049
-ls9g20 MACH_LS9G20 LS9G20 3050
-mios_v1 MACH_MIOS_V1 MIOS_V1 3051
-s5pc110_crespo MACH_S5PC110_CRESPO S5PC110_CRESPO 3052
-controltek9g20 MACH_CONTROLTEK9G20 CONTROLTEK9G20 3053
-tin307 MACH_TIN307 TIN307 3054
-tin510 MACH_TIN510 TIN510 3055
-bluecheese MACH_BLUECHEESE BLUECHEESE 3057
-tem3x30 MACH_TEM3X30 TEM3X30 3058
-harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059
-msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060
-spear900 MACH_SPEAR900 SPEAR900 3061
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062
-rdstor MACH_RDSTOR RDSTOR 3063
-usdloader MACH_USDLOADER USDLOADER 3064
-tsoploader MACH_TSOPLOADER TSOPLOADER 3065
-kronos MACH_KRONOS KRONOS 3066
-ffcore MACH_FFCORE FFCORE 3067
-mone MACH_MONE MONE 3068
-unit2s MACH_UNIT2S UNIT2S 3069
-acer_a5 MACH_ACER_A5 ACER_A5 3070
-etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071
-stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072
-p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073
-tulip MACH_TULIP TULIP 3074
-sunflower MACH_SUNFLOWER SUNFLOWER 3075
-rib MACH_RIB RIB 3076
-clod MACH_CLOD CLOD 3077
-rump MACH_RUMP RUMP 3078
-tenderloin MACH_TENDERLOIN TENDERLOIN 3079
-shortloin MACH_SHORTLOIN SHORTLOIN 3080
-antares MACH_ANTARES ANTARES 3082
-wb40n MACH_WB40N WB40N 3083
-herring MACH_HERRING HERRING 3084
-naxy400 MACH_NAXY400 NAXY400 3085
-naxy1200 MACH_NAXY1200 NAXY1200 3086
vpr200 MACH_VPR200 VPR200 3087
-bug20 MACH_BUG20 BUG20 3088
-goflexnet MACH_GOFLEXNET GOFLEXNET 3089
torbreck MACH_TORBRECK TORBRECK 3090
-saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091
-callisto MACH_CALLISTO CALLISTO 3092
-multhsu MACH_MULTHSU MULTHSU 3093
-saluda MACH_SALUDA SALUDA 3094
-pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095
-vc0718 MACH_VC0718 VC0718 3096
-mvblx MACH_MVBLX MVBLX 3097
-inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098
-inhand_fury MACH_INHAND_FURY INHAND_FURY 3099
-inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100
-hdnvp MACH_HDNVP HDNVP 3101
-softwinner MACH_SOFTWINNER SOFTWINNER 3102
prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
-nas6210 MACH_NAS6210 NAS6210 3104
-unisdev MACH_UNISDEV UNISDEV 3105
-sbca11 MACH_SBCA11 SBCA11 3106
-saga MACH_SAGA SAGA 3107
-ns_k330 MACH_NS_K330 NS_K330 3108
-tanna MACH_TANNA TANNA 3109
-imate8502 MACH_IMATE8502 IMATE8502 3110
-aspen MACH_ASPEN ASPEN 3111
-daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112
-zmx25 MACH_ZMX25 ZMX25 3113
-maple1 MACH_MAPLE1 MAPLE1 3114
-qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115
-qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116
-abilene MACH_ABILENE ABILENE 3117
-eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118
-iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119
-coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120
-santiago MACH_SANTIAGO SANTIAGO 3121
-mx257sol MACH_MX257SOL MX257SOL 3122
-strasbourg MACH_STRASBOURG STRASBOURG 3123
-msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124
-smartqv5 MACH_SMARTQV5 SMARTQV5 3125
-smartqv3 MACH_SMARTQV3 SMARTQV3 3126
-smartqv7 MACH_SMARTQV7 SMARTQV7 3127
paz00 MACH_PAZ00 PAZ00 3128
acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
-fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131
-hdgu MACH_HDGU HDGU 3132
-pyramid MACH_PYRAMID PYRAMID 3133
-epiphan MACH_EPIPHAN EPIPHAN 3134
-omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135
-gurnard MACH_GURNARD GURNARD 3136
-gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137
-bcm2708 MACH_BCM2708 BCM2708 3138
-mx51_ggc MACH_MX51_GGC MX51_GGC 3139
-sharespace MACH_SHARESPACE SHARESPACE 3140
-haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141
-simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142
-crux MACH_CRUX CRUX 3143
-mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144
-charon MACH_CHARON CHARON 3145
-picocom3 MACH_PICOCOM3 PICOCOM3 3146
-picocom4 MACH_PICOCOM4 PICOCOM4 3147
-serrano MACH_SERRANO SERRANO 3148
-doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149
-evsy MACH_EVSY EVSY 3150
-huashan MACH_HUASHAN HUASHAN 3151
-lausanne MACH_LAUSANNE LAUSANNE 3152
-emerald MACH_EMERALD EMERALD 3153
-tqma35 MACH_TQMA35 TQMA35 3154
-marvel MACH_MARVEL MARVEL 3155
-manuae MACH_MANUAE MANUAE 3156
-chacha MACH_CHACHA CHACHA 3157
-lemon MACH_LEMON LEMON 3158
-csc MACH_CSC CSC 3159
-gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160
-t20 MACH_T20 T20 3161
-hdmini MACH_HDMINI HDMINI 3162
-sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163
-express MACH_EXPRESS EXPRESS 3164
-express_kt MACH_EXPRESS_KT EXPRESS_KT 3165
-maximasp MACH_MAXIMASP MAXIMASP 3166
-nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167
-nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168
-sunfire MACH_SUNFIRE SUNFIRE 3169
-arowana MACH_AROWANA AROWANA 3170
-tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171
-tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172
-edison MACH_EDISON EDISON 3173
-svp8500v1 MACH_SVP8500V1 SVP8500V1 3174
-svp8500v2 MACH_SVP8500V2 SVP8500V2 3175
-svp5500 MACH_SVP5500 SVP5500 3176
-b5500 MACH_B5500 B5500 3177
-s5500 MACH_S5500 S5500 3178
-icon MACH_ICON ICON 3179
-elephant MACH_ELEPHANT ELEPHANT 3180
-shooter MACH_SHOOTER SHOOTER 3182
-spade_lte MACH_SPADE_LTE SPADE_LTE 3183
-philhwani MACH_PHILHWANI PHILHWANI 3184
-gsncomm MACH_GSNCOMM GSNCOMM 3185
-strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186
-mmm MACH_MMM MMM 3187
-davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188
ag5evm MACH_AG5EVM AG5EVM 3189
-sc575plc MACH_SC575PLC SC575PLC 3190
-sc575hmi MACH_SC575IPC SC575IPC 3191
-omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192
-top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194
-top9000_su MACH_TOP9000_SU TOP9000_SU 3195
-utm300 MACH_UTM300 UTM300 3196
tsunagi MACH_TSUNAGI TSUNAGI 3197
-ts75xx MACH_TS75XX TS75XX 3198
-ts47xx MACH_TS47XX TS47XX 3200
-da850_k5 MACH_DA850_K5 DA850_K5 3201
-ax502 MACH_AX502 AX502 3202
-igep0032 MACH_IGEP0032 IGEP0032 3203
-antero MACH_ANTERO ANTERO 3204
-synergy MACH_SYNERGY SYNERGY 3205
ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
-punica MACH_PUNICA PUNICA 3208
trimslice MACH_TRIMSLICE TRIMSLICE 3209
-mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210
mackerel MACH_MACKEREL MACKEREL 3211
-fa9x27 MACH_FA9X27 FA9X27 3213
-ns2816tb MACH_NS2816TB NS2816TB 3214
-ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215
-ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216
kaen MACH_KAEN KAEN 3217
-nv1000 MACH_NV1000 NV1000 3218
-nuc950ts MACH_NUC950TS NUC950TS 3219
nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220
-ast2200 MACH_AST2200 AST2200 3221
-lead MACH_LEAD LEAD 3222
-unino1 MACH_UNINO1 UNINO1 3223
-greeco MACH_GREECO GREECO 3224
-verdi MACH_VERDI VERDI 3225
dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226
quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227
abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228
@@ -949,13 +621,11 @@
ts4800 MACH_TS4800 TS4800 3313
tqma9263 MACH_TQMA9263 TQMA9263 3314
holiday MACH_HOLIDAY HOLIDAY 3315
-dma_6410 MACH_DMA6410 DMA6410 3316
pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317
hwgw6410 MACH_HWGW6410 HWGW6410 3318
shenzhou MACH_SHENZHOU SHENZHOU 3319
cwme9210 MACH_CWME9210 CWME9210 3320
cwme9210js MACH_CWME9210JS CWME9210JS 3321
-pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322
colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323
w21 MACH_W21 W21 3324
polysat1 MACH_POLYSAT1 POLYSAT1 3325
@@ -1021,13 +691,11 @@
bockw MACH_BOCKW BOCKW 3386
eva2000 MACH_EVA2000 EVA2000 3387
steelyard MACH_STEELYARD STEELYARD 3388
-sdh001 MACH_MACH_SDH001 MACH_SDH001 3390
nsslsboard MACH_NSSLSBOARD NSSLSBOARD 3392
geneva_b5 MACH_GENEVA_B5 GENEVA_B5 3393
spear1340 MACH_SPEAR1340 SPEAR1340 3394
rexmas MACH_REXMAS REXMAS 3395
msm8960_cdp MACH_MSM8960_CDP MSM8960_CDP 3396
-msm8960_mdp MACH_MSM8960_MDP MSM8960_MDP 3397
msm8960_fluid MACH_MSM8960_FLUID MSM8960_FLUID 3398
msm8960_apq MACH_MSM8960_APQ MSM8960_APQ 3399
helios_v2 MACH_HELIOS_V2 HELIOS_V2 3400
@@ -1123,5 +791,381 @@
thales_adc MACH_THALES_ADC THALES_ADC 3492
ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493
atdgp318 MACH_ATDGP318 ATDGP318 3494
+dma210u MACH_DMA210U DMA210U 3495
+em_t3 MACH_EM_T3 EM_T3 3496
+htx3250 MACH_HTX3250 HTX3250 3497
+g50 MACH_G50 G50 3498
+eco5 MACH_ECO5 ECO5 3499
+wintergrasp MACH_WINTERGRASP WINTERGRASP 3500
+puro MACH_PURO PURO 3501
+shooter_k MACH_SHOOTER_K SHOOTER_K 3502
+nspire MACH_NSPIRE NSPIRE 3503
+mickxx MACH_MICKXX MICKXX 3504
+lxmb MACH_LXMB LXMB 3505
+adam MACH_ADAM ADAM 3507
+b1004 MACH_B1004 B1004 3508
+oboea MACH_OBOEA OBOEA 3509
+a1015 MACH_A1015 A1015 3510
+robin_vbdt30 MACH_ROBIN_VBDT30 ROBIN_VBDT30 3511
+tegra_enterprise MACH_TEGRA_ENTERPRISE TEGRA_ENTERPRISE 3512
+rfl108200_mk10 MACH_RFL108200_MK10 RFL108200_MK10 3513
+rfl108300_mk16 MACH_RFL108300_MK16 RFL108300_MK16 3514
+rover_v7 MACH_ROVER_V7 ROVER_V7 3515
+miphone MACH_MIPHONE MIPHONE 3516
+femtobts MACH_FEMTOBTS FEMTOBTS 3517
+monopoli MACH_MONOPOLI MONOPOLI 3518
+boss MACH_BOSS BOSS 3519
+davinci_dm368_vtam MACH_DAVINCI_DM368_VTAM DAVINCI_DM368_VTAM 3520
+clcon MACH_CLCON CLCON 3521
+nokia_rm696 MACH_NOKIA_RM696 NOKIA_RM696 3522
+tahiti MACH_TAHITI TAHITI 3523
+fighter MACH_FIGHTER FIGHTER 3524
+sgh_i710 MACH_SGH_I710 SGH_I710 3525
+integreproscb MACH_INTEGREPROSCB INTEGREPROSCB 3526
+monza MACH_MONZA MONZA 3527
+calimain MACH_CALIMAIN CALIMAIN 3528
+mx6q_sabreauto MACH_MX6Q_SABREAUTO MX6Q_SABREAUTO 3529
+gma01x MACH_GMA01X GMA01X 3530
+sbc51 MACH_SBC51 SBC51 3531
+fit MACH_FIT FIT 3532
+steelhead MACH_STEELHEAD STEELHEAD 3533
+panther MACH_PANTHER PANTHER 3534
+msm8960_liquid MACH_MSM8960_LIQUID MSM8960_LIQUID 3535
+lexikonct MACH_LEXIKONCT LEXIKONCT 3536
+ns2816_stb MACH_NS2816_STB NS2816_STB 3537
+sei_mm2_lpc3250 MACH_SEI_MM2_LPC3250 SEI_MM2_LPC3250 3538
+cmimx53 MACH_CMIMX53 CMIMX53 3539
+sandwich MACH_SANDWICH SANDWICH 3540
+chief MACH_CHIEF CHIEF 3541
+pogo_e02 MACH_POGO_E02 POGO_E02 3542
+mikrap_x168 MACH_MIKRAP_X168 MIKRAP_X168 3543
+htcmozart MACH_HTCMOZART HTCMOZART 3544
+htcgold MACH_HTCGOLD HTCGOLD 3545
+mt72xx MACH_MT72XX MT72XX 3546
+mx51_ivy MACH_MX51_IVY MX51_IVY 3547
+mx51_lvd MACH_MX51_LVD MX51_LVD 3548
+omap3_wiser2 MACH_OMAP3_WISER2 OMAP3_WISER2 3549
+dreamplug MACH_DREAMPLUG DREAMPLUG 3550
+cobas_c_111 MACH_COBAS_C_111 COBAS_C_111 3551
+cobas_u_411 MACH_COBAS_U_411 COBAS_U_411 3552
+hssd MACH_HSSD HSSD 3553
+iom35x MACH_IOM35X IOM35X 3554
+psom_omap MACH_PSOM_OMAP PSOM_OMAP 3555
+iphone_2g MACH_IPHONE_2G IPHONE_2G 3556
+iphone_3g MACH_IPHONE_3G IPHONE_3G 3557
+ipod_touch_1g MACH_IPOD_TOUCH_1G IPOD_TOUCH_1G 3558
+pharos_tpc MACH_PHAROS_TPC PHAROS_TPC 3559
+mx53_hydra MACH_MX53_HYDRA MX53_HYDRA 3560
+ns2816_dev_board MACH_NS2816_DEV_BOARD NS2816_DEV_BOARD 3561
+iphone_3gs MACH_IPHONE_3GS IPHONE_3GS 3562
+iphone_4 MACH_IPHONE_4 IPHONE_4 3563
+ipod_touch_4g MACH_IPOD_TOUCH_4G IPOD_TOUCH_4G 3564
+dragon_e1100 MACH_DRAGON_E1100 DRAGON_E1100 3565
+topside MACH_TOPSIDE TOPSIDE 3566
+irisiii MACH_IRISIII IRISIII 3567
+deto_macarm9 MACH_DETO_MACARM9 DETO_MACARM9 3568
+eti_d1 MACH_ETI_D1 ETI_D1 3569
+som3530sdk MACH_SOM3530SDK SOM3530SDK 3570
+oc_engine MACH_OC_ENGINE OC_ENGINE 3571
+apq8064_sim MACH_APQ8064_SIM APQ8064_SIM 3572
+alps MACH_ALPS ALPS 3575
+tny_t3730 MACH_TNY_T3730 TNY_T3730 3576
+geryon_nfe MACH_GERYON_NFE GERYON_NFE 3577
+ns2816_ref_board MACH_NS2816_REF_BOARD NS2816_REF_BOARD 3578
+silverstone MACH_SILVERSTONE SILVERSTONE 3579
+mtt2440 MACH_MTT2440 MTT2440 3580
+ynicdb MACH_YNICDB YNICDB 3581
+bct MACH_BCT BCT 3582
+tuscan MACH_TUSCAN TUSCAN 3583
+xbt_sam9g45 MACH_XBT_SAM9G45 XBT_SAM9G45 3584
+enbw_cmc MACH_ENBW_CMC ENBW_CMC 3585
+ch104mx257 MACH_CH104MX257 CH104MX257 3587
+openpri MACH_OPENPRI OPENPRI 3588
+am335xevm MACH_AM335XEVM AM335XEVM 3589
+picodmb MACH_PICODMB PICODMB 3590
+waluigi MACH_WALUIGI WALUIGI 3591
+punicag7 MACH_PUNICAG7 PUNICAG7 3592
+ipad_1g MACH_IPAD_1G IPAD_1G 3593
+appletv_2g MACH_APPLETV_2G APPLETV_2G 3594
+mach_ecog45 MACH_MACH_ECOG45 MACH_ECOG45 3595
+ait_cam_enc_4xx MACH_AIT_CAM_ENC_4XX AIT_CAM_ENC_4XX 3596
+runnymede MACH_RUNNYMEDE RUNNYMEDE 3597
+play MACH_PLAY PLAY 3598
+hw90260 MACH_HW90260 HW90260 3599
+tagh MACH_TAGH TAGH 3600
+filbert MACH_FILBERT FILBERT 3601
+getinge_netcomv3 MACH_GETINGE_NETCOMV3 GETINGE_NETCOMV3 3602
+cw20 MACH_CW20 CW20 3603
+cinema MACH_CINEMA CINEMA 3604
+cinema_tea MACH_CINEMA_TEA CINEMA_TEA 3605
+cinema_coffee MACH_CINEMA_COFFEE CINEMA_COFFEE 3606
+cinema_juice MACH_CINEMA_JUICE CINEMA_JUICE 3607
+mx53_mirage2 MACH_MX53_MIRAGE2 MX53_MIRAGE2 3609
+mx53_efikasb MACH_MX53_EFIKASB MX53_EFIKASB 3610
+stm_b2000 MACH_STM_B2000 STM_B2000 3612
+m28evk MACH_M28EVK M28EVK 3613
+pda MACH_PDA PDA 3614
+meraki_mr58 MACH_MERAKI_MR58 MERAKI_MR58 3615
+kota2 MACH_KOTA2 KOTA2 3616
+letcool MACH_LETCOOL LETCOOL 3617
+mx27iat MACH_MX27IAT MX27IAT 3618
+apollo_td MACH_APOLLO_TD APOLLO_TD 3619
+arena MACH_ARENA ARENA 3620
+gsngateway MACH_GSNGATEWAY GSNGATEWAY 3621
+lf2000 MACH_LF2000 LF2000 3622
+bonito MACH_BONITO BONITO 3623
+asymptote MACH_ASYMPTOTE ASYMPTOTE 3624
+bst2brd MACH_BST2BRD BST2BRD 3625
+tx335s MACH_TX335S TX335S 3626
+pelco_tesla MACH_PELCO_TESLA PELCO_TESLA 3627
+rrhtestplat MACH_RRHTESTPLAT RRHTESTPLAT 3628
+vidtonic_pro MACH_VIDTONIC_PRO VIDTONIC_PRO 3629
+pl_apollo MACH_PL_APOLLO PL_APOLLO 3630
+pl_phoenix MACH_PL_PHOENIX PL_PHOENIX 3631
+m28cu3 MACH_M28CU3 M28CU3 3632
+vvbox_hd MACH_VVBOX_HD VVBOX_HD 3633
+coreware_sam9260_ MACH_COREWARE_SAM9260_ COREWARE_SAM9260_ 3634
+marmaduke MACH_MARMADUKE MARMADUKE 3635
+amg_xlcore_camera MACH_AMG_XLCORE_CAMERA AMG_XLCORE_CAMERA 3636
+omap3_egf MACH_OMAP3_EGF OMAP3_EGF 3637
smdk4212 MACH_SMDK4212 SMDK4212 3638
+dnp9200 MACH_DNP9200 DNP9200 3639
+tf101 MACH_TF101 TF101 3640
+omap3silvio MACH_OMAP3SILVIO OMAP3SILVIO 3641
+picasso2 MACH_PICASSO2 PICASSO2 3642
+vangogh2 MACH_VANGOGH2 VANGOGH2 3643
+olpc_xo_1_75 MACH_OLPC_XO_1_75 OLPC_XO_1_75 3644
+gx400 MACH_GX400 GX400 3645
+gs300 MACH_GS300 GS300 3646
+acer_a9 MACH_ACER_A9 ACER_A9 3647
+vivow_evm MACH_VIVOW_EVM VIVOW_EVM 3648
+veloce_cxq MACH_VELOCE_CXQ VELOCE_CXQ 3649
+veloce_cxm MACH_VELOCE_CXM VELOCE_CXM 3650
+p1852 MACH_P1852 P1852 3651
+naxy100 MACH_NAXY100 NAXY100 3652
+taishan MACH_TAISHAN TAISHAN 3653
+touchlink MACH_TOUCHLINK TOUCHLINK 3654
+stm32f103ze MACH_STM32F103ZE STM32F103ZE 3655
+mcx MACH_MCX MCX 3656
+stm_nmhdk_fli7610 MACH_STM_NMHDK_FLI7610 STM_NMHDK_FLI7610 3657
+top28x MACH_TOP28X TOP28X 3658
+okl4vp_microvisor MACH_OKL4VP_MICROVISOR OKL4VP_MICROVISOR 3659
+pop MACH_POP POP 3660
+layer MACH_LAYER LAYER 3661
+trondheim MACH_TRONDHEIM TRONDHEIM 3662
+eva MACH_EVA EVA 3663
+trust_taurus MACH_TRUST_TAURUS TRUST_TAURUS 3664
+ns2816_huashan MACH_NS2816_HUASHAN NS2816_HUASHAN 3665
+ns2816_yangcheng MACH_NS2816_YANGCHENG NS2816_YANGCHENG 3666
+p852 MACH_P852 P852 3667
+flea3 MACH_FLEA3 FLEA3 3668
+bowfin MACH_BOWFIN BOWFIN 3669
+mv88de3100 MACH_MV88DE3100 MV88DE3100 3670
+pia_am35x MACH_PIA_AM35X PIA_AM35X 3671
+cedar MACH_CEDAR CEDAR 3672
+picasso_e MACH_PICASSO_E PICASSO_E 3673
+samsung_e60 MACH_SAMSUNG_E60 SAMSUNG_E60 3674
+sdvr_mini MACH_SDVR_MINI SDVR_MINI 3676
+omap3_ij3k MACH_OMAP3_IJ3K OMAP3_IJ3K 3677
+modasmc1 MACH_MODASMC1 MODASMC1 3678
+apq8064_rumi3 MACH_APQ8064_RUMI3 APQ8064_RUMI3 3679
+matrix506 MACH_MATRIX506 MATRIX506 3680
+msm9615_mtp MACH_MSM9615_MTP MSM9615_MTP 3681
+dm36x_spawndc MACH_DM36X_SPAWNDC DM36X_SPAWNDC 3682
+sff792 MACH_SFF792 SFF792 3683
+am335xiaevm MACH_AM335XIAEVM AM335XIAEVM 3684
+g3c2440 MACH_G3C2440 G3C2440 3685
+tion270 MACH_TION270 TION270 3686
+w22q7arm02 MACH_W22Q7ARM02 W22Q7ARM02 3687
+omap_cat MACH_OMAP_CAT OMAP_CAT 3688
+at91sam9n12ek MACH_AT91SAM9N12EK AT91SAM9N12EK 3689
+morrison MACH_MORRISON MORRISON 3690
+svdu MACH_SVDU SVDU 3691
+lpp01 MACH_LPP01 LPP01 3692
+ubc283 MACH_UBC283 UBC283 3693
+zeppelin MACH_ZEPPELIN ZEPPELIN 3694
+motus MACH_MOTUS MOTUS 3695
+neomainboard MACH_NEOMAINBOARD NEOMAINBOARD 3696
+devkit3250 MACH_DEVKIT3250 DEVKIT3250 3697
+devkit7000 MACH_DEVKIT7000 DEVKIT7000 3698
+fmc_uic MACH_FMC_UIC FMC_UIC 3699
+fmc_dcm MACH_FMC_DCM FMC_DCM 3700
+batwm MACH_BATWM BATWM 3701
+atlas6cb MACH_ATLAS6CB ATLAS6CB 3702
+blue MACH_BLUE BLUE 3705
+colorado MACH_COLORADO COLORADO 3706
+popc MACH_POPC POPC 3707
+promwad_jade MACH_PROMWAD_JADE PROMWAD_JADE 3708
+amp MACH_AMP AMP 3709
+gnet_amp MACH_GNET_AMP GNET_AMP 3710
+toques MACH_TOQUES TOQUES 3711
+dct_storm MACH_DCT_STORM DCT_STORM 3713
+owl MACH_OWL OWL 3715
+cogent_csb1741 MACH_COGENT_CSB1741 COGENT_CSB1741 3716
+adillustra610 MACH_ADILLUSTRA610 ADILLUSTRA610 3718
+ecafe_na04 MACH_ECAFE_NA04 ECAFE_NA04 3719
+popct MACH_POPCT POPCT 3720
+omap3_helena MACH_OMAP3_HELENA OMAP3_HELENA 3721
+ach MACH_ACH ACH 3722
+module_dtb MACH_MODULE_DTB MODULE_DTB 3723
+oslo_elisabeth MACH_OSLO_ELISABETH OSLO_ELISABETH 3725
+tt01 MACH_TT01 TT01 3726
+msm8930_cdp MACH_MSM8930_CDP MSM8930_CDP 3727
+msm8930_mtp MACH_MSM8930_MTP MSM8930_MTP 3728
+msm8930_fluid MACH_MSM8930_FLUID MSM8930_FLUID 3729
+ltu11 MACH_LTU11 LTU11 3730
+am1808_spawnco MACH_AM1808_SPAWNCO AM1808_SPAWNCO 3731
+flx6410 MACH_FLX6410 FLX6410 3732
+mx6q_qsb MACH_MX6Q_QSB MX6Q_QSB 3733
+mx53_plt424 MACH_MX53_PLT424 MX53_PLT424 3734
+jasmine MACH_JASMINE JASMINE 3735
+l138_owlboard_plus MACH_L138_OWLBOARD_PLUS L138_OWLBOARD_PLUS 3736
+wr21 MACH_WR21 WR21 3737
+peaboy MACH_PEABOY PEABOY 3739
+mx28_plato MACH_MX28_PLATO MX28_PLATO 3740
+kacom2 MACH_KACOM2 KACOM2 3741
+slco MACH_SLCO SLCO 3742
+imx51pico MACH_IMX51PICO IMX51PICO 3743
+glink1 MACH_GLINK1 GLINK1 3744
+diamond MACH_DIAMOND DIAMOND 3745
+d9000 MACH_D9000 D9000 3746
+w5300e01 MACH_W5300E01 W5300E01 3747
+im6000 MACH_IM6000 IM6000 3748
+mx51_fred51 MACH_MX51_FRED51 MX51_FRED51 3749
+stm32f2 MACH_STM32F2 STM32F2 3750
+ville MACH_VILLE VILLE 3751
+ptip_murnau MACH_PTIP_MURNAU PTIP_MURNAU 3752
+ptip_classic MACH_PTIP_CLASSIC PTIP_CLASSIC 3753
+mx53grb MACH_MX53GRB MX53GRB 3754
+gagarin MACH_GAGARIN GAGARIN 3755
+nas2big MACH_NAS2BIG NAS2BIG 3757
+superfemto MACH_SUPERFEMTO SUPERFEMTO 3758
+teufel MACH_TEUFEL TEUFEL 3759
+dinara MACH_DINARA DINARA 3760
+vanquish MACH_VANQUISH VANQUISH 3761
+zipabox1 MACH_ZIPABOX1 ZIPABOX1 3762
+u9540 MACH_U9540 U9540 3763
+jet MACH_JET JET 3764
smdk4412 MACH_SMDK4412 SMDK4412 3765
+elite MACH_ELITE ELITE 3766
+spear320_hmi MACH_SPEAR320_HMI SPEAR320_HMI 3767
+ontario MACH_ONTARIO ONTARIO 3768
+mx6q_sabrelite MACH_MX6Q_SABRELITE MX6Q_SABRELITE 3769
+vc200 MACH_VC200 VC200 3770
+msm7625a_ffa MACH_MSM7625A_FFA MSM7625A_FFA 3771
+msm7625a_surf MACH_MSM7625A_SURF MSM7625A_SURF 3772
+benthossbp MACH_BENTHOSSBP BENTHOSSBP 3773
+smdk5210 MACH_SMDK5210 SMDK5210 3774
+empq2300 MACH_EMPQ2300 EMPQ2300 3775
+minipos MACH_MINIPOS MINIPOS 3776
+omap5_sevm MACH_OMAP5_SEVM OMAP5_SEVM 3777
+shelter MACH_SHELTER SHELTER 3778
+omap3_devkit8500 MACH_OMAP3_DEVKIT8500 OMAP3_DEVKIT8500 3779
+edgetd MACH_EDGETD EDGETD 3780
+copperyard MACH_COPPERYARD COPPERYARD 3781
+edge MACH_EDGE EDGE 3782
+edge_u MACH_EDGE_U EDGE_U 3783
+edge_td MACH_EDGE_TD EDGE_TD 3784
+wdss MACH_WDSS WDSS 3785
+dl_pb25 MACH_DL_PB25 DL_PB25 3786
+dss11 MACH_DSS11 DSS11 3787
+cpa MACH_CPA CPA 3788
+aptp2000 MACH_APTP2000 APTP2000 3789
+marzen MACH_MARZEN MARZEN 3790
+st_turbine MACH_ST_TURBINE ST_TURBINE 3791
+gtl_it3300 MACH_GTL_IT3300 GTL_IT3300 3792
+mx6_mule MACH_MX6_MULE MX6_MULE 3793
+v7pxa_dt MACH_V7PXA_DT V7PXA_DT 3794
+v7mmp_dt MACH_V7MMP_DT V7MMP_DT 3795
+dragon7 MACH_DRAGON7 DRAGON7 3796
+krome MACH_KROME KROME 3797
+oratisdante MACH_ORATISDANTE ORATISDANTE 3798
+fathom MACH_FATHOM FATHOM 3799
+dns325 MACH_DNS325 DNS325 3800
+sarnen MACH_SARNEN SARNEN 3801
+ubisys_g1 MACH_UBISYS_G1 UBISYS_G1 3802
+mx53_pf1 MACH_MX53_PF1 MX53_PF1 3803
+asanti MACH_ASANTI ASANTI 3804
+volta MACH_VOLTA VOLTA 3805
+knight MACH_KNIGHT KNIGHT 3807
+beaglebone MACH_BEAGLEBONE BEAGLEBONE 3808
+becker MACH_BECKER BECKER 3809
+fc360 MACH_FC360 FC360 3810
+pmi2_xls MACH_PMI2_XLS PMI2_XLS 3811
+taranto MACH_TARANTO TARANTO 3812
+plutux MACH_PLUTUX PLUTUX 3813
+ipmp_medcom MACH_IPMP_MEDCOM IPMP_MEDCOM 3814
+absolut MACH_ABSOLUT ABSOLUT 3815
+awpb3 MACH_AWPB3 AWPB3 3816
+nfp32xx_dt MACH_NFP32XX_DT NFP32XX_DT 3817
+dl_pb53 MACH_DL_PB53 DL_PB53 3818
+acu_ii MACH_ACU_II ACU_II 3819
+avalon MACH_AVALON AVALON 3820
+sphinx MACH_SPHINX SPHINX 3821
+titan_t MACH_TITAN_T TITAN_T 3822
+harvest_boris MACH_HARVEST_BORIS HARVEST_BORIS 3823
+mach_msm7x30_m3s MACH_MACH_MSM7X30_M3S MACH_MSM7X30_M3S 3824
+smdk5250 MACH_SMDK5250 SMDK5250 3825
+imxt_lite MACH_IMXT_LITE IMXT_LITE 3826
+imxt_std MACH_IMXT_STD IMXT_STD 3827
+imxt_log MACH_IMXT_LOG IMXT_LOG 3828
+imxt_nav MACH_IMXT_NAV IMXT_NAV 3829
+imxt_full MACH_IMXT_FULL IMXT_FULL 3830
+ag09015 MACH_AG09015 AG09015 3831
+am3517_mt_ventoux MACH_AM3517_MT_VENTOUX AM3517_MT_VENTOUX 3832
+dp1arm9 MACH_DP1ARM9 DP1ARM9 3833
+picasso_m MACH_PICASSO_M PICASSO_M 3834
+video_gadget MACH_VIDEO_GADGET VIDEO_GADGET 3835
+mtt_om3x MACH_MTT_OM3X MTT_OM3X 3836
+mx6q_arm2 MACH_MX6Q_ARM2 MX6Q_ARM2 3837
+picosam9g45 MACH_PICOSAM9G45 PICOSAM9G45 3838
+vpm_dm365 MACH_VPM_DM365 VPM_DM365 3839
+bonfire MACH_BONFIRE BONFIRE 3840
+mt2p2d MACH_MT2P2D MT2P2D 3841
+sigpda01 MACH_SIGPDA01 SIGPDA01 3842
+cn27 MACH_CN27 CN27 3843
+mx25_cwtap MACH_MX25_CWTAP MX25_CWTAP 3844
+apf28 MACH_APF28 APF28 3845
+pelco_maxwell MACH_PELCO_MAXWELL PELCO_MAXWELL 3846
+ge_phoenix MACH_GE_PHOENIX GE_PHOENIX 3847
+empc_a500 MACH_EMPC_A500 EMPC_A500 3848
+ims_arm9 MACH_IMS_ARM9 IMS_ARM9 3849
+mini2416 MACH_MINI2416 MINI2416 3850
+mini2450 MACH_MINI2450 MINI2450 3851
+mini310 MACH_MINI310 MINI310 3852
+spear_hurricane MACH_SPEAR_HURRICANE SPEAR_HURRICANE 3853
+mt7208 MACH_MT7208 MT7208 3854
+lpc178x MACH_LPC178X LPC178X 3855
+farleys MACH_FARLEYS FARLEYS 3856
+efm32gg_dk3750 MACH_EFM32GG_DK3750 EFM32GG_DK3750 3857
+zeus_board MACH_ZEUS_BOARD ZEUS_BOARD 3858
+cc51 MACH_CC51 CC51 3859
+fxi_c210 MACH_FXI_C210 FXI_C210 3860
+msm8627_cdp MACH_MSM8627_CDP MSM8627_CDP 3861
+msm8627_mtp MACH_MSM8627_MTP MSM8627_MTP 3862
+armadillo800eva MACH_ARMADILLO800EVA ARMADILLO800EVA 3863
+primou MACH_PRIMOU PRIMOU 3864
+primoc MACH_PRIMOC PRIMOC 3865
+primoct MACH_PRIMOCT PRIMOCT 3866
+a9500 MACH_A9500 A9500 3867
+pluto MACH_PLUTO PLUTO 3869
+acfx100 MACH_ACFX100 ACFX100 3870
+msm8625_rumi3 MACH_MSM8625_RUMI3 MSM8625_RUMI3 3871
+valente MACH_VALENTE VALENTE 3872
+crfs_rfeye MACH_CRFS_RFEYE CRFS_RFEYE 3873
+rfeye MACH_RFEYE RFEYE 3874
+phidget_sbc3 MACH_PHIDGET_SBC3 PHIDGET_SBC3 3875
+tcw_mika MACH_TCW_MIKA TCW_MIKA 3876
+imx28_egf MACH_IMX28_EGF IMX28_EGF 3877
+valente_wx MACH_VALENTE_WX VALENTE_WX 3878
+huangshans MACH_HUANGSHANS HUANGSHANS 3879
+bosphorus1 MACH_BOSPHORUS1 BOSPHORUS1 3880
+prima MACH_PRIMA PRIMA 3881
+evita_ulk MACH_EVITA_ULK EVITA_ULK 3884
+merisc600 MACH_MERISC600 MERISC600 3885
+dolak MACH_DOLAK DOLAK 3886
+sbc53 MACH_SBC53 SBC53 3887
+elite_ulk MACH_ELITE_ULK ELITE_ULK 3888
+pov2 MACH_POV2 POV2 3889
+ipod_touch_2g MACH_IPOD_TOUCH_2G IPOD_TOUCH_2G 3890
+da850_pqab MACH_DA850_PQAB DA850_PQAB 3891
diff --git a/arch/avr32/boards/merisc/merisc_sysfs.c b/arch/avr32/boards/merisc/merisc_sysfs.c
index df431fd..5a25231 100644
--- a/arch/avr32/boards/merisc/merisc_sysfs.c
+++ b/arch/avr32/boards/merisc/merisc_sysfs.c
@@ -13,7 +13,6 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/timer.h>
#include <linux/err.h>
#include <linux/ctype.h>
diff --git a/arch/avr32/include/asm/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h
index 1552c96..84c7e51 100644
--- a/arch/avr32/include/asm/ipcbuf.h
+++ b/arch/avr32/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __ASM_AVR32_IPCBUF_H
-#define __ASM_AVR32_IPCBUF_H
-
-/*
-* The user_ipc_perm structure for AVR32 architecture.
-* Note extra padding because this structure is passed back and forth
-* between kernel and user space.
-*
-* Pad space is left for:
-* - 32-bit mode_t and seq
-* - 2 miscellaneous 32-bit values
-*/
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __ASM_AVR32_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index c8d1fae..247b88c 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -62,4 +62,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 7a9c03d..e5deda4 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -85,7 +85,6 @@
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
#define TIF_NOTIFY_RESUME 9 /* callback before returning to user */
-#define TIF_FREEZE 29
#define TIF_DEBUG 30 /* debugging enabled */
#define TIF_USERSPACE 31 /* true if FS sets userspace */
@@ -98,7 +97,6 @@
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
/* Note: The masks below must never span more than 16 bits! */
diff --git a/arch/avr32/include/asm/types.h b/arch/avr32/include/asm/types.h
index 72667a3..9bb2d8b 100644
--- a/arch/avr32/include/asm/types.h
+++ b/arch/avr32/include/asm/types.h
@@ -10,12 +10,6 @@
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
index e84faff..2233be7 100644
--- a/arch/avr32/kernel/cpu.c
+++ b/arch/avr32/kernel/cpu.c
@@ -6,7 +6,7 @@
* published by the Free Software Foundation.
*/
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
#include <linux/module.h>
@@ -26,16 +26,16 @@
* XXX: If/when a SMP-capable implementation of AVR32 will ever be
* made, we must make sure that the code executes on the correct CPU.
*/
-static ssize_t show_pc0event(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pc0event(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
unsigned long pccr;
pccr = sysreg_read(PCCR);
return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f);
}
-static ssize_t store_pc0event(struct sys_device *dev,
- struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pc0event(struct device *dev,
+ struct device_attribute *attr, const char *buf,
size_t count)
{
unsigned long val;
@@ -48,16 +48,16 @@
sysreg_write(PCCR, val);
return count;
}
-static ssize_t show_pc0count(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pc0count(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
unsigned long pcnt0;
pcnt0 = sysreg_read(PCNT0);
return sprintf(buf, "%lu\n", pcnt0);
}
-static ssize_t store_pc0count(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t store_pc0count(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long val;
@@ -71,16 +71,16 @@
return count;
}
-static ssize_t show_pc1event(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pc1event(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
unsigned long pccr;
pccr = sysreg_read(PCCR);
return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f);
}
-static ssize_t store_pc1event(struct sys_device *dev,
- struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pc1event(struct device *dev,
+ struct device_attribute *attr, const char *buf,
size_t count)
{
unsigned long val;
@@ -93,16 +93,16 @@
sysreg_write(PCCR, val);
return count;
}
-static ssize_t show_pc1count(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pc1count(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
unsigned long pcnt1;
pcnt1 = sysreg_read(PCNT1);
return sprintf(buf, "%lu\n", pcnt1);
}
-static ssize_t store_pc1count(struct sys_device *dev,
- struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pc1count(struct device *dev,
+ struct device_attribute *attr, const char *buf,
size_t count)
{
unsigned long val;
@@ -116,16 +116,16 @@
return count;
}
-static ssize_t show_pccycles(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pccycles(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
unsigned long pccnt;
pccnt = sysreg_read(PCCNT);
return sprintf(buf, "%lu\n", pccnt);
}
-static ssize_t store_pccycles(struct sys_device *dev,
- struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pccycles(struct device *dev,
+ struct device_attribute *attr, const char *buf,
size_t count)
{
unsigned long val;
@@ -139,16 +139,16 @@
return count;
}
-static ssize_t show_pcenable(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pcenable(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
unsigned long pccr;
pccr = sysreg_read(PCCR);
return sprintf(buf, "%c\n", (pccr & 1)?'1':'0');
}
-static ssize_t store_pcenable(struct sys_device *dev,
- struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pcenable(struct device *dev,
+ struct device_attribute *attr, const char *buf,
size_t count)
{
unsigned long pccr, val;
@@ -167,12 +167,12 @@
return count;
}
-static SYSDEV_ATTR(pc0event, 0600, show_pc0event, store_pc0event);
-static SYSDEV_ATTR(pc0count, 0600, show_pc0count, store_pc0count);
-static SYSDEV_ATTR(pc1event, 0600, show_pc1event, store_pc1event);
-static SYSDEV_ATTR(pc1count, 0600, show_pc1count, store_pc1count);
-static SYSDEV_ATTR(pccycles, 0600, show_pccycles, store_pccycles);
-static SYSDEV_ATTR(pcenable, 0600, show_pcenable, store_pcenable);
+static DEVICE_ATTR(pc0event, 0600, show_pc0event, store_pc0event);
+static DEVICE_ATTR(pc0count, 0600, show_pc0count, store_pc0count);
+static DEVICE_ATTR(pc1event, 0600, show_pc1event, store_pc1event);
+static DEVICE_ATTR(pc1count, 0600, show_pc1count, store_pc1count);
+static DEVICE_ATTR(pccycles, 0600, show_pccycles, store_pccycles);
+static DEVICE_ATTR(pcenable, 0600, show_pcenable, store_pcenable);
#endif /* CONFIG_PERFORMANCE_COUNTERS */
@@ -186,12 +186,12 @@
register_cpu(c, cpu);
#ifdef CONFIG_PERFORMANCE_COUNTERS
- sysdev_create_file(&c->sysdev, &attr_pc0event);
- sysdev_create_file(&c->sysdev, &attr_pc0count);
- sysdev_create_file(&c->sysdev, &attr_pc1event);
- sysdev_create_file(&c->sysdev, &attr_pc1count);
- sysdev_create_file(&c->sysdev, &attr_pccycles);
- sysdev_create_file(&c->sysdev, &attr_pcenable);
+ device_create_file(&c->dev, &dev_attr_pc0event);
+ device_create_file(&c->dev, &dev_attr_pc0count);
+ device_create_file(&c->dev, &dev_attr_pc1event);
+ device_create_file(&c->dev, &dev_attr_pc1count);
+ device_create_file(&c->dev, &dev_attr_pccycles);
+ device_create_file(&c->dev, &dev_attr_pcenable);
#endif
}
diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
index bc3aa18..900e49b 100644
--- a/arch/avr32/kernel/irq.c
+++ b/arch/avr32/kernel/irq.c
@@ -14,7 +14,7 @@
#include <linux/kernel_stat.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
/* May be overridden by platform code */
int __weak nmi_enable(void)
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index ef5a2a0..ea33957 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -34,10 +34,12 @@
{
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched())
cpu_idle_sleep();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 02560fd..53ad100 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -100,7 +100,6 @@
TIF_NEED_RESCHED */
#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
-#define TIF_FREEZE 6 /* is freezing for suspend */
#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
#define TIF_SINGLESTEP 9
@@ -111,7 +110,6 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 6a80a9e..8dd0416 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -88,10 +88,12 @@
#endif
if (!idle)
idle = default_idle;
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched())
idle();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug
index 0b9a630..14881e8 100644
--- a/arch/cris/Kconfig.debug
+++ b/arch/cris/Kconfig.debug
@@ -1,6 +1,5 @@
menu "Kernel hacking"
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
config PROFILING
bool "Kernel profiling support"
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index bb978ed..6773fc8 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -47,14 +47,12 @@
.rating = 300,
.read = read_cont_rotime,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init etrax_init_cont_rotime(void)
{
- cont_rotime.mult = clocksource_khz2mult(100000, cont_rotime.shift);
- clocksource_register(&cont_rotime);
+ clocksource_register_khz(&cont_rotime, 100000);
return 0;
}
arch_initcall(etrax_init_cont_rotime);
diff --git a/arch/cris/include/asm/ipcbuf.h b/arch/cris/include/asm/ipcbuf.h
index 8b0c18b..84c7e51 100644
--- a/arch/cris/include/asm/ipcbuf.h
+++ b/arch/cris/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __CRIS_IPCBUF_H__
-#define __CRIS_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for CRIS architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __CRIS_IPCBUF_H__ */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index 1a4a619..e269264 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -64,6 +64,9 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index 332f19c..29b9288 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -86,7 +86,6 @@
#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 17 /* is terminating due to OOM killer */
-#define TIF_FREEZE 18 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
@@ -94,7 +93,6 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
diff --git a/arch/cris/include/asm/types.h b/arch/cris/include/asm/types.h
index 551a12c..adaf827 100644
--- a/arch/cris/include/asm/types.h
+++ b/arch/cris/include/asm/types.h
@@ -3,12 +3,6 @@
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index bad27a6..c5e69ab 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -341,16 +341,6 @@
source "drivers/pcmcia/Kconfig"
-#config MATH_EMULATION
-# bool "Math emulation support (EXPERIMENTAL)"
-# depends on EXPERIMENTAL
-# help
-# At some point in the future, this will cause floating-point math
-# instructions to be emulated by the kernel on machines that lack a
-# floating-point math coprocessor. Thrill-seekers and chronically
-# sleep-deprived psychotic hacker types can say Y now, everyone else
-# should probably wait a while.
-
menu "Power management options"
config ARCH_SUSPEND_POSSIBLE
diff --git a/arch/frv/include/asm/ipcbuf.h b/arch/frv/include/asm/ipcbuf.h
index b546f67..84c7e51 100644
--- a/arch/frv/include/asm/ipcbuf.h
+++ b/arch/frv/include/asm/ipcbuf.h
@@ -1,30 +1 @@
-#ifndef __ASM_IPCBUF_H__
-#define __ASM_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for FR-V architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __ASM_IPCBUF_H__ */
-
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index a6b2688..ce80fda 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -62,5 +62,8 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index cefbe73..92d83ea 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -111,7 +111,6 @@
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 17 /* is terminating due to OOM killer */
-#define TIF_FREEZE 18 /* freezing for suspend */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
@@ -120,7 +119,6 @@
#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h
index aa3e7fd..390a612 100644
--- a/arch/frv/include/asm/types.h
+++ b/arch/frv/include/asm/types.h
@@ -14,12 +14,6 @@
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/h8300/include/asm/ipcbuf.h b/arch/h8300/include/asm/ipcbuf.h
index 2cd1ebc..84c7e51 100644
--- a/arch/h8300/include/asm/ipcbuf.h
+++ b/arch/h8300/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __H8300_IPCBUF_H__
-#define __H8300_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for H8/300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __H8300_IPCBUF_H__ */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index 04c0f45..cf1daab 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -62,4 +62,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index d6f1784..9c126e0 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -90,7 +90,6 @@
#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
-#define TIF_FREEZE 16 /* is freezing for suspend */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@@ -99,7 +98,6 @@
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
diff --git a/arch/h8300/include/asm/types.h b/arch/h8300/include/asm/types.h
index bb2c91a..07257d9 100644
--- a/arch/h8300/include/asm/types.h
+++ b/arch/h8300/include/asm/types.h
@@ -3,27 +3,10 @@
#include <asm-generic/int-ll64.h>
-#if !defined(__ASSEMBLY__)
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
#ifdef __KERNEL__
#define BITS_PER_LONG 32
#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-
#endif /* _H8300_TYPES_H */
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 27489b6..3b7a7c4 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -23,6 +23,9 @@
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
select HAVE_GENERIC_HARDIRQS
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
select IRQ_PER_CPU
@@ -474,9 +477,6 @@
MAX_NUMNODES will be 2^(This value).
If in doubt, use the default.
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
# VIRTUAL_MEM_MAP has been retained for historical reasons.
config VIRTUAL_MEM_MAP
diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h
index 6073b18..3deac95 100644
--- a/arch/ia64/include/asm/cputime.h
+++ b/arch/ia64/include/asm/cputime.h
@@ -26,59 +26,53 @@
#include <linux/jiffies.h>
#include <asm/processor.h>
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
+typedef u64 __nocast cputime_t;
+typedef u64 __nocast cputime64_t;
-#define cputime_zero ((cputime_t)0)
#define cputime_one_jiffy jiffies_to_cputime(1)
-#define cputime_max ((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b) ((__a) + (__b))
-#define cputime_sub(__a, __b) ((__a) - (__b))
-#define cputime_div(__a, __n) ((__a) / (__n))
-#define cputime_halve(__a) ((__a) >> 1)
-#define cputime_eq(__a, __b) ((__a) == (__b))
-#define cputime_gt(__a, __b) ((__a) > (__b))
-#define cputime_ge(__a, __b) ((__a) >= (__b))
-#define cputime_lt(__a, __b) ((__a) < (__b))
-#define cputime_le(__a, __b) ((__a) <= (__b))
-
-#define cputime64_zero ((cputime64_t)0)
-#define cputime64_add(__a, __b) ((__a) + (__b))
-#define cputime64_sub(__a, __b) ((__a) - (__b))
-#define cputime_to_cputime64(__ct) (__ct)
/*
* Convert cputime <-> jiffies (HZ)
*/
-#define cputime_to_jiffies(__ct) ((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies_to_cputime(__jif) ((__jif) * (NSEC_PER_SEC / HZ))
-#define cputime64_to_jiffies64(__ct) ((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies64_to_cputime64(__jif) ((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime_to_jiffies(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies_to_cputime(__jif) \
+ (__force cputime_t)((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime64_to_jiffies64(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies64_to_cputime64(__jif) \
+ (__force cputime64_t)((__jif) * (NSEC_PER_SEC / HZ))
/*
* Convert cputime <-> microseconds
*/
-#define cputime_to_usecs(__ct) ((__ct) / NSEC_PER_USEC)
-#define usecs_to_cputime(__usecs) ((__usecs) * NSEC_PER_USEC)
+#define cputime_to_usecs(__ct) \
+ ((__force u64)(__ct) / NSEC_PER_USEC)
+#define usecs_to_cputime(__usecs) \
+ (__force cputime_t)((__usecs) * NSEC_PER_USEC)
+#define usecs_to_cputime64(__usecs) \
+ (__force cputime64_t)((__usecs) * NSEC_PER_USEC)
/*
* Convert cputime <-> seconds
*/
-#define cputime_to_secs(__ct) ((__ct) / NSEC_PER_SEC)
-#define secs_to_cputime(__secs) ((__secs) * NSEC_PER_SEC)
+#define cputime_to_secs(__ct) \
+ ((__force u64)(__ct) / NSEC_PER_SEC)
+#define secs_to_cputime(__secs) \
+ (__force cputime_t)((__secs) * NSEC_PER_SEC)
/*
* Convert cputime <-> timespec (nsec)
*/
static inline cputime_t timespec_to_cputime(const struct timespec *val)
{
- cputime_t ret = val->tv_sec * NSEC_PER_SEC;
- return (ret + val->tv_nsec);
+ u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_nsec;
+ return (__force cputime_t) ret;
}
static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
{
- val->tv_sec = ct / NSEC_PER_SEC;
- val->tv_nsec = ct % NSEC_PER_SEC;
+ val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
+ val->tv_nsec = (__force u64) ct % NSEC_PER_SEC;
}
/*
@@ -86,25 +80,28 @@
*/
static inline cputime_t timeval_to_cputime(struct timeval *val)
{
- cputime_t ret = val->tv_sec * NSEC_PER_SEC;
- return (ret + val->tv_usec * NSEC_PER_USEC);
+ u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_usec * NSEC_PER_USEC;
+ return (__force cputime_t) ret;
}
static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
{
- val->tv_sec = ct / NSEC_PER_SEC;
- val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+ val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
+ val->tv_usec = ((__force u64) ct % NSEC_PER_SEC) / NSEC_PER_USEC;
}
/*
* Convert cputime <-> clock (USER_HZ)
*/
-#define cputime_to_clock_t(__ct) ((__ct) / (NSEC_PER_SEC / USER_HZ))
-#define clock_t_to_cputime(__x) ((__x) * (NSEC_PER_SEC / USER_HZ))
+#define cputime_to_clock_t(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / USER_HZ))
+#define clock_t_to_cputime(__x) \
+ (__force cputime_t)((__x) * (NSEC_PER_SEC / USER_HZ))
/*
* Convert cputime64 to clock.
*/
-#define cputime64_to_clock_t(__ct) cputime_to_clock_t((cputime_t)__ct)
+#define cputime64_to_clock_t(__ct) \
+ cputime_to_clock_t((__force cputime_t)__ct)
#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
#endif /* __IA64_CPUTIME_H */
diff --git a/arch/ia64/include/asm/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h
index 079899a..84c7e51 100644
--- a/arch/ia64/include/asm/ipcbuf.h
+++ b/arch/ia64/include/asm/ipcbuf.h
@@ -1,28 +1 @@
-#ifndef _ASM_IA64_IPCBUF_H
-#define _ASM_IA64_IPCBUF_H
-
-/*
- * The ipc64_perm structure for IA-64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid_t uid;
- __kernel_gid_t gid;
- __kernel_uid_t cuid;
- __kernel_gid_t cgid;
- __kernel_mode_t mode;
- unsigned short seq;
- unsigned short __pad1;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_IA64_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 51427ea..4b03664 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -71,4 +71,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ff0cc84..e054bcc 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -113,7 +113,6 @@
#define TIF_MEMDIE 17 /* is terminating due to OOM killer */
#define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */
#define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */
-#define TIF_FREEZE 20 /* is freezing for suspend */
#define TIF_RESTORE_RSE 21 /* user RBS is newer than kernel RBS */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
@@ -126,7 +125,6 @@
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_MCA_INIT (1 << TIF_MCA_INIT)
#define _TIF_DB_DISABLED (1 << TIF_DB_DISABLED)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_RESTORE_RSE (1 << TIF_RESTORE_RSE)
/* "work to do on user-return" bits */
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
index 82b3939..3f5b122 100644
--- a/arch/ia64/include/asm/types.h
+++ b/arch/ia64/include/asm/types.h
@@ -28,8 +28,6 @@
# define __IA64_UL(x) ((unsigned long)(x))
# define __IA64_UL_CONST(x) x##UL
-typedef unsigned int umode_t;
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index c539c68..2d67317 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -24,7 +24,7 @@
* Copyright (C) 2006, Intel Corp. All rights reserved.
*
*/
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/cpu.h>
@@ -35,10 +35,10 @@
#define ERR_DATA_BUFFER_SIZE 3 // Three 8-byte;
#define define_one_ro(name) \
-static SYSDEV_ATTR(name, 0444, show_##name, NULL)
+static DEVICE_ATTR(name, 0444, show_##name, NULL)
#define define_one_rw(name) \
-static SYSDEV_ATTR(name, 0644, show_##name, store_##name)
+static DEVICE_ATTR(name, 0644, show_##name, store_##name)
static u64 call_start[NR_CPUS];
static u64 phys_addr[NR_CPUS];
@@ -55,7 +55,7 @@
#define show(name) \
static ssize_t \
-show_##name(struct sys_device *dev, struct sysdev_attribute *attr, \
+show_##name(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
u32 cpu=dev->id; \
@@ -64,7 +64,7 @@
#define store(name) \
static ssize_t \
-store_##name(struct sys_device *dev, struct sysdev_attribute *attr, \
+store_##name(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t size) \
{ \
unsigned int cpu=dev->id; \
@@ -78,7 +78,7 @@
* processor. The cpu number in driver is only used for storing data.
*/
static ssize_t
-store_call_start(struct sys_device *dev, struct sysdev_attribute *attr,
+store_call_start(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
unsigned int cpu=dev->id;
@@ -127,7 +127,7 @@
store(err_type_info)
static ssize_t
-show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+show_virtual_to_phys(struct device *dev, struct device_attribute *attr,
char *buf)
{
unsigned int cpu=dev->id;
@@ -135,7 +135,7 @@
}
static ssize_t
-store_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+store_virtual_to_phys(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
unsigned int cpu=dev->id;
@@ -159,8 +159,8 @@
store(err_struct_info)
static ssize_t
-show_err_data_buffer(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+show_err_data_buffer(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
unsigned int cpu=dev->id;
@@ -171,8 +171,8 @@
}
static ssize_t
-store_err_data_buffer(struct sys_device *dev,
- struct sysdev_attribute *attr,
+store_err_data_buffer(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
unsigned int cpu=dev->id;
@@ -209,14 +209,14 @@
define_one_ro(resources);
static struct attribute *default_attrs[] = {
- &attr_call_start.attr,
- &attr_virtual_to_phys.attr,
- &attr_err_type_info.attr,
- &attr_err_struct_info.attr,
- &attr_err_data_buffer.attr,
- &attr_status.attr,
- &attr_capabilities.attr,
- &attr_resources.attr,
+ &dev_attr_call_start.attr,
+ &dev_attr_virtual_to_phys.attr,
+ &dev_attr_err_type_info.attr,
+ &dev_attr_err_struct_info.attr,
+ &dev_attr_err_data_buffer.attr,
+ &dev_attr_status.attr,
+ &dev_attr_capabilities.attr,
+ &dev_attr_resources.attr,
NULL
};
@@ -225,12 +225,12 @@
.name = "err_inject"
};
/* Add/Remove err_inject interface for CPU device */
-static int __cpuinit err_inject_add_dev(struct sys_device * sys_dev)
+static int __cpuinit err_inject_add_dev(struct device * sys_dev)
{
return sysfs_create_group(&sys_dev->kobj, &err_inject_attr_group);
}
-static int __cpuinit err_inject_remove_dev(struct sys_device * sys_dev)
+static int __cpuinit err_inject_remove_dev(struct device * sys_dev)
{
sysfs_remove_group(&sys_dev->kobj, &err_inject_attr_group);
return 0;
@@ -239,9 +239,9 @@
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
- struct sys_device *sys_dev;
+ struct device *sys_dev;
- sys_dev = get_cpu_sysdev(cpu);
+ sys_dev = get_cpu_device(cpu);
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
@@ -283,13 +283,13 @@
err_inject_exit(void)
{
int i;
- struct sys_device *sys_dev;
+ struct device *sys_dev;
#ifdef ERR_INJ_DEBUG
printk(KERN_INFO "Exit error injection driver.\n");
#endif
for_each_online_cpu(i) {
- sys_dev = get_cpu_sysdev(i);
+ sys_dev = get_cpu_device(i);
sysfs_remove_group(&sys_dev->kobj, &err_inject_attr_group);
}
unregister_hotcpu_notifier(&err_inject_cpu_notifier);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 89accc6..b2c65e0 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2228,7 +2228,7 @@
/*
* allocate a new dcache entry
*/
- path.dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this);
+ path.dentry = d_alloc(pfmfs_mnt->mnt_root, &this);
if (!path.dentry) {
iput(inode);
return ERR_PTR(-ENOMEM);
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5e2c724..cd57d73 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -220,6 +220,23 @@
}
}
+/* merge overlaps */
+static int __init
+merge_regions (struct rsvd_region *rsvd_region, int max)
+{
+ int i;
+ for (i = 1; i < max; ++i) {
+ if (rsvd_region[i].start >= rsvd_region[i-1].end)
+ continue;
+ if (rsvd_region[i].end > rsvd_region[i-1].end)
+ rsvd_region[i-1].end = rsvd_region[i].end;
+ --max;
+ memmove(&rsvd_region[i], &rsvd_region[i+1],
+ (max - i) * sizeof(struct rsvd_region));
+ }
+ return max;
+}
+
/*
* Request address space for all standard resources
*/
@@ -270,6 +287,7 @@
if (ret == 0 && size > 0) {
if (!base) {
sort_regions(rsvd_region, *n);
+ *n = merge_regions(rsvd_region, *n);
base = kdump_find_rsvd_region(size,
rsvd_region, *n);
}
@@ -373,6 +391,7 @@
BUG_ON(IA64_MAX_RSVD_REGIONS + 1 < n);
sort_regions(rsvd_region, num_rsvd_regions);
+ num_rsvd_regions = merge_regions(rsvd_region, num_rsvd_regions);
}
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 9be1f11..9deb21d 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -350,7 +350,7 @@
}
/* Add cache interface for CPU device */
-static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_add_dev(struct device * sys_dev)
{
unsigned int cpu = sys_dev->id;
unsigned long i, j;
@@ -400,7 +400,7 @@
}
/* Remove cache interface for CPU device */
-static int __cpuinit cache_remove_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_remove_dev(struct device * sys_dev)
{
unsigned int cpu = sys_dev->id;
unsigned long i;
@@ -428,9 +428,9 @@
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
- struct sys_device *sys_dev;
+ struct device *sys_dev;
- sys_dev = get_cpu_sysdev(cpu);
+ sys_dev = get_cpu_device(cpu);
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
@@ -454,7 +454,7 @@
int i;
for_each_online_cpu(i) {
- struct sys_device *sys_dev = get_cpu_sysdev((unsigned int)i);
+ struct device *sys_dev = get_cpu_device((unsigned int)i);
cache_add_dev(sys_dev);
}
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index f114a3b..1516d1d 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -16,6 +16,7 @@
*/
#include <linux/bootmem.h>
#include <linux/efi.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/nmi.h>
#include <linux/swap.h>
@@ -348,7 +349,7 @@
printk("Virtual mem_map starts at 0x%p\n", mem_map);
}
#else /* !CONFIG_VIRTUAL_MEM_MAP */
- add_active_range(0, 0, max_low_pfn);
+ memblock_add_node(0, PFN_PHYS(max_low_pfn), 0);
free_area_init_nodes(max_zone_pfns);
#endif /* !CONFIG_VIRTUAL_MEM_MAP */
zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 00cb0e2..13df239d 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -10,6 +10,7 @@
#include <linux/bootmem.h>
#include <linux/efi.h>
#include <linux/elf.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/module.h>
@@ -557,8 +558,7 @@
#endif
if (start < end)
- add_active_range(nid, __pa(start) >> PAGE_SHIFT,
- __pa(end) >> PAGE_SHIFT);
+ memblock_add_node(__pa(start), end - start, nid);
return 0;
}
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 485c42d..dfac09a 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -150,12 +150,11 @@
* PROM does not support SAL_INTR_REDIRECT, or it failed.
* Revert to old method.
*/
- new_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_ATOMIC);
+ new_irq_info = kmemdup(sn_irq_info, sizeof(struct sn_irq_info),
+ GFP_ATOMIC);
if (new_irq_info == NULL)
return NULL;
- memcpy(new_irq_info, sn_irq_info, sizeof(struct sn_irq_info));
-
/* Free the old PROM new_irq_info structure */
sn_intr_free(local_nasid, local_widget, new_irq_info);
unregister_intr_pda(new_irq_info);
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
index 5698f29..8886a0b 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -127,12 +127,11 @@
* Allocate kernel bus soft and copy from prom.
*/
- soft = kmalloc(sizeof(struct pcibus_info), GFP_KERNEL);
+ soft = kmemdup(prom_bussoft, sizeof(struct pcibus_info), GFP_KERNEL);
if (!soft) {
return NULL;
}
- memcpy(soft, prom_bussoft, sizeof(struct pcibus_info));
soft->pbi_buscommon.bs_base = (unsigned long)
ioremap(REGION_OFFSET(soft->pbi_buscommon.bs_base),
sizeof(struct pic));
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 642451e..e77c477 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -600,11 +600,11 @@
* Allocate kernel bus soft and copy from prom.
*/
- tioca_common = kzalloc(sizeof(struct tioca_common), GFP_KERNEL);
+ tioca_common = kmemdup(prom_bussoft, sizeof(struct tioca_common),
+ GFP_KERNEL);
if (!tioca_common)
return NULL;
- memcpy(tioca_common, prom_bussoft, sizeof(struct tioca_common));
tioca_common->ca_common.bs_base = (unsigned long)
ioremap(REGION_OFFSET(tioca_common->ca_common.bs_base),
sizeof(struct tioca_common));
diff --git a/arch/m32r/include/asm/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h
index 8d2d7c8..84c7e51 100644
--- a/arch/m32r/include/asm/ipcbuf.h
+++ b/arch/m32r/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef _ASM_M32R_IPCBUF_H
-#define _ASM_M32R_IPCBUF_H
-
-/*
- * The ipc64_perm structure for m32r architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_M32R_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index 469787c3..e8b8c5b 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -62,4 +62,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 0227dba..bf8fa3c 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -138,7 +138,6 @@
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
-#define TIF_FREEZE 19 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
@@ -149,7 +148,6 @@
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
diff --git a/arch/m32r/include/asm/types.h b/arch/m32r/include/asm/types.h
index bd00355..bb2eead 100644
--- a/arch/m32r/include/asm/types.h
+++ b/arch/m32r/include/asm/types.h
@@ -3,12 +3,6 @@
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 361d540..81fdaa7 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -3,7 +3,6 @@
default y
select HAVE_IDE
select HAVE_AOUT if MMU
- select GENERIC_ATOMIC64 if MMU
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
@@ -41,12 +40,15 @@
config GENERIC_IOMAP
def_bool MMU
+config GENERIC_CSUM
+ bool
+
config TIME_LOW_RES
bool
default y
config ARCH_USES_GETTIMEOFFSET
- def_bool MMU
+ def_bool MMU && !COLDFIRE
config NO_IOPORT
def_bool y
@@ -61,6 +63,12 @@
config CPU_HAS_NO_BITFIELDS
bool
+config CPU_HAS_NO_MULDIV64
+ bool
+
+config CPU_HAS_ADDRESS_SPACES
+ bool
+
config HZ
int
default 1000 if CLEOPATRA
@@ -80,9 +88,12 @@
config MMU_MOTOROLA
bool
+config MMU_COLDFIRE
+ bool
+
config MMU_SUN3
bool
- depends on MMU && !MMU_MOTOROLA
+ depends on MMU && !MMU_MOTOROLA && !MMU_COLDFIRE
menu "Platform setup"
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index e632b2d..8a9c767 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -1,8 +1,42 @@
comment "Processor Type"
+choice
+ prompt "CPU family support"
+ default M68KCLASSIC if MMU
+ default COLDFIRE if !MMU
+ help
+ The Freescale (was Motorola) M68K family of processors implements
+ the full 68000 processor instruction set.
+ The Freescale ColdFire family of processors is a modern derivitive
+ of the 68000 processor family. They are mainly targeted at embedded
+ applications, and are all System-On-Chip (SOC) devices, as opposed
+ to stand alone CPUs. They implement a subset of the original 68000
+ processor instruction set.
+ If you anticipate running this kernel on a computer with a classic
+ MC68xxx processor, select M68KCLASSIC.
+ If you anticipate running this kernel on a computer with a ColdFire
+ processor, select COLDFIRE.
+
+config M68KCLASSIC
+ bool "Classic M68K CPU family support"
+
+config COLDFIRE
+ bool "Coldfire CPU family support"
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_HAS_NO_BITFIELDS
+ select CPU_HAS_NO_MULDIV64
+ select GENERIC_CSUM
+
+endchoice
+
+if M68KCLASSIC
+
config M68000
bool
select CPU_HAS_NO_BITFIELDS
+ select CPU_HAS_NO_MULDIV64
+ select GENERIC_CSUM
help
The Freescale (was Motorola) 68000 CPU is the first generation of
the well known M68K family of processors. The CPU core as well as
@@ -18,21 +52,11 @@
based on the 68020 processor. For the most part it is used in
System-On-Chip parts, and does not contain a paging MMU.
-config COLDFIRE
- bool
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select CPU_HAS_NO_BITFIELDS
- help
- The Freescale ColdFire family of processors is a modern derivitive
- of the 68000 processor family. They are mainly targeted at embedded
- applications, and are all System-On-Chip (SOC) devices, as opposed
- to stand alone CPUs. They implement a subset of the original 68000
- processor instruction set.
-
config M68020
bool "68020 support"
depends on MMU
+ select GENERIC_ATOMIC64
+ select CPU_HAS_ADDRESS_SPACES
help
If you anticipate running this kernel on a computer with a MC68020
processor, say Y. Otherwise, say N. Note that the 68020 requires a
@@ -42,6 +66,8 @@
config M68030
bool "68030 support"
depends on MMU && !MMU_SUN3
+ select GENERIC_ATOMIC64
+ select CPU_HAS_ADDRESS_SPACES
help
If you anticipate running this kernel on a computer with a MC68030
processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
@@ -50,6 +76,8 @@
config M68040
bool "68040 support"
depends on MMU && !MMU_SUN3
+ select GENERIC_ATOMIC64
+ select CPU_HAS_ADDRESS_SPACES
help
If you anticipate running this kernel on a computer with a MC68LC040
or MC68040 processor, say Y. Otherwise, say N. Note that an
@@ -59,6 +87,8 @@
config M68060
bool "68060 support"
depends on MMU && !MMU_SUN3
+ select GENERIC_ATOMIC64
+ select CPU_HAS_ADDRESS_SPACES
help
If you anticipate running this kernel on a computer with a MC68060
processor, say Y. Otherwise, say N.
@@ -91,10 +121,13 @@
help
Motorola 68360 processor support.
+endif # M68KCLASSIC
+
+if COLDFIRE
+
config M5206
bool "MCF5206"
depends on !MMU
- select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@@ -103,7 +136,6 @@
config M5206e
bool "MCF5206e"
depends on !MMU
- select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@@ -112,7 +144,6 @@
config M520x
bool "MCF520x"
depends on !MMU
- select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
help
@@ -121,7 +152,6 @@
config M523x
bool "MCF523x"
depends on !MMU
- select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
@@ -131,7 +161,6 @@
config M5249
bool "MCF5249"
depends on !MMU
- select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@@ -143,7 +172,6 @@
config M5271
bool "MCF5271"
depends on !MMU
- select COLDFIRE
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
@@ -154,7 +182,6 @@
config M5272
bool "MCF5272"
depends on !MMU
- select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@@ -163,7 +190,6 @@
config M5275
bool "MCF5275"
depends on !MMU
- select COLDFIRE
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
@@ -174,7 +200,6 @@
config M528x
bool "MCF528x"
depends on !MMU
- select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
@@ -184,7 +209,6 @@
config M5307
bool "MCF5307"
depends on !MMU
- select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -194,7 +218,6 @@
config M532x
bool "MCF532x"
depends on !MMU
- select COLDFIRE
select HAVE_CACHE_CB
help
Freescale (Motorola) ColdFire 532x processor support.
@@ -202,7 +225,6 @@
config M5407
bool "MCF5407"
depends on !MMU
- select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -214,9 +236,8 @@
config M547x
bool "MCF547x"
- depends on !MMU
- select COLDFIRE
select M54xx
+ select MMU_COLDFIRE if MMU
select HAVE_CACHE_CB
select HAVE_MBAR
help
@@ -224,14 +245,15 @@
config M548x
bool "MCF548x"
- depends on !MMU
- select COLDFIRE
+ select MMU_COLDFIRE if MMU
select M54xx
select HAVE_CACHE_CB
select HAVE_MBAR
help
Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
+endif # COLDFIRE
+
comment "Processor Specific Options"
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index 2bdb1b0..87233ac 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -2,6 +2,25 @@
source "lib/Kconfig.debug"
+config BOOTPARAM
+ bool 'Compiled-in Kernel Boot Parameter'
+
+config BOOTPARAM_STRING
+ string 'Kernel Boot Parameter'
+ default 'console=ttyS0,19200'
+ depends on BOOTPARAM
+
+config EARLY_PRINTK
+ bool "Early printk" if EMBEDDED
+ depends on MVME16x || MAC
+ default y
+ help
+ Write kernel log output directly to a serial port.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized.
+ You should normally say N here, unless you want to debug such a crash.
+
if !MMU
config FULLDEBUG
@@ -15,14 +34,6 @@
help
Use a fast secondary clock to produce profiling information.
-config BOOTPARAM
- bool 'Compiled-in Kernel Boot Parameter'
-
-config BOOTPARAM_STRING
- string 'Kernel Boot Parameter'
- default 'console=ttyS0,19200'
- depends on BOOTPARAM
-
config NO_KERNEL_MSG
bool "Suppress Kernel BUG Messages"
help
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index 6033f5d..04a3d9b 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -8,8 +8,8 @@
menu "Platform devices"
config HEARTBEAT
- bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
- default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
+ bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
+ default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
@@ -59,27 +59,6 @@
menu "Character devices"
-config ATARI_MFPSER
- tristate "Atari MFP serial support"
- depends on ATARI
- ---help---
- If you like to use the MFP serial ports ("Modem1", "Serial1") under
- Linux, say Y. The driver equally supports all kinds of MFP serial
- ports and automatically detects whether Serial1 is available.
-
- To compile this driver as a module, choose M here.
-
- Note for Falcon users: You also have an MFP port, it's just not
- wired to the outside... But you could use the port under Linux.
-
-config ATARI_MIDI
- tristate "Atari MIDI serial support"
- depends on ATARI
- help
- If you want to use your Atari's MIDI port in Linux, say Y.
-
- To compile this driver as a module, choose M here.
-
config ATARI_DSP56K
tristate "Atari DSP56k support (EXPERIMENTAL)"
depends on ATARI && EXPERIMENTAL
@@ -99,15 +78,6 @@
To compile this driver as a module, choose M here.
-config MULTIFACE_III_TTY
- tristate "Multiface Card III serial support"
- depends on AMIGA
- help
- If you want to use a Multiface III card's serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
config HPDCA
tristate "HP DCA serial support"
depends on DIO && SERIAL_8250
@@ -122,13 +92,9 @@
If you want to use the internal "APCI" serial ports on an HP400
machine, say Y here.
-config DN_SERIAL
- bool "Support for DN serial port (dummy)"
- depends on APOLLO
-
config SERIAL_CONSOLE
bool "Support for serial port console"
- depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL)
+ depends on AMIGA_BUILTIN_SERIAL=y
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
@@ -140,10 +106,10 @@
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyS1". (Try "man bootparam" or see the documentation of
- your boot loader (lilo or loadlin) about how to pass options to the
- kernel at boot time.)
+ your boot loader about how to pass options to the kernel at boot
+ time.)
- If you don't have a VGA card installed and you say Y here, the
+ If you don't have a graphical console and you say Y here, the
kernel will automatically use the first serial line, /dev/ttyS0, as
system console.
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index ef4a26a..7cdf6b0 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -1,5 +1,7 @@
comment "Machine Types"
+if M68KCLASSIC
+
config AMIGA
bool "Amiga support"
depends on MMU
@@ -130,6 +132,8 @@
If you don't want to compile a kernel exclusively for a Sun 3, say N.
+endif # M68KCLASSIC
+
config PILOT
bool
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index 6d196da..8048e1b 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -82,8 +82,6 @@
extern void atari_microwire_cmd(int cmd);
-extern int atari_SCC_reset_done;
-
static unsigned int atari_irq_startup(struct irq_data *data)
{
unsigned int irq = data->irq;
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 5a48424..a547ba9 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -202,7 +202,6 @@
static void __init atari_init_scc_port(int cflag)
{
- extern int atari_SCC_reset_done;
static int clksrc_table[9] =
/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index dbb49fc..e93fdae 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -255,7 +255,6 @@
CONFIG_HIDRAW=y
# CONFIG_USB_SUPPORT is not set
CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_MULTIFACE_III_TTY=m
CONFIG_SERIAL_CONSOLE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 562b221..66b26c1 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -223,8 +223,6 @@
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_USB_SUPPORT is not set
-CONFIG_DN_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 82978df..1513325 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -235,10 +235,7 @@
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_MFPSER=y
-CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
-CONFIG_SERIAL_CONSOLE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index ad9e857..55d394e 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -318,13 +318,8 @@
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_MFPSER=y
-CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_MULTIFACE_III_TTY=m
-CONFIG_SERIAL167=y
-CONFIG_DN_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index c45aaf3..cdb70d6 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -218,8 +218,6 @@
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_USB_SUPPORT is not set
-CONFIG_SERIAL167=y
-CONFIG_SERIAL_CONSOLE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/m68k/emu/nfeth.c b/arch/m68k/emu/nfeth.c
index c5748bb..a985a7e 100644
--- a/arch/m68k/emu/nfeth.c
+++ b/arch/m68k/emu/nfeth.c
@@ -39,7 +39,7 @@
#define MAX_UNIT 8
/* These identify the driver base version and may not be removed. */
-static const char version[] __devinitdata =
+static const char version[] __devinitconst =
KERN_INFO KBUILD_MODNAME ".c:v" DRV_VERSION " " DRV_RELDATE
" S.Opichal, M.Jurik, P.Stehlik\n"
KERN_INFO " http://aranym.org/\n";
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index 1c05a62..bf16af1 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -24,7 +24,8 @@
unsigned long hp300_model;
unsigned long hp300_uart_scode = -1;
-unsigned char ledstate;
+unsigned char hp300_ledstate;
+EXPORT_SYMBOL(hp300_ledstate);
static char s_hp330[] __initdata = "330";
static char s_hp340[] __initdata = "340";
diff --git a/arch/m68k/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h
deleted file mode 100644
index 871c0d5..0000000
--- a/arch/m68k/include/asm/anchor.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/****************************************************************************/
-
-/*
- * anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
- *
- * (C) Copyright 2000, Moreton Bay (www.moreton.com.au)
- */
-
-/****************************************************************************/
-#ifndef anchor_h
-#define anchor_h
-/****************************************************************************/
-
-/*
- * Define basic addressing info.
- */
-#if defined(CONFIG_M5407C3)
-#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */
-#define COMEM_IRQ 25 /* IRQ of anchor part */
-#else
-#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */
-#define COMEM_IRQ 25 /* IRQ of anchor part */
-#endif
-
-/****************************************************************************/
-
-/*
- * 4-byte registers of CO-MEM, so adjust register addresses for
- * easy access. Handy macro for word access too.
- */
-#define LREG(a) ((a) >> 2)
-#define WREG(a) ((a) >> 1)
-
-
-/*
- * Define base addresses within CO-MEM Lite register address space.
- */
-#define COMEM_I2O 0x0000 /* I2O registers */
-#define COMEM_OPREGS 0x0400 /* Operation registers */
-#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */
-#define COMEM_SHMEM 0x4000 /* Shared memory region */
-
-#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */
-
-
-/*
- * Define CO-MEM Registers.
- */
-#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */
-#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */
-#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */
-#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */
-#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */
-#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */
-#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */
-#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */
-
-#define COMEM_DAHBASE 0x0460 /* Direct access base address */
-
-#define COMEM_NVCMD 0x04a0 /* I2C serial command */
-#define COMEM_NVREAD 0x04a4 /* I2C serial read */
-#define COMEM_NVSTAT 0x04a8 /* I2C status */
-
-#define COMEM_DMALBASE 0x04b0 /* DMA local base address */
-#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */
-#define COMEM_DMASIZE 0x04b8 /* DMA size */
-#define COMEM_DMACTL 0x04bc /* DMA control */
-
-#define COMEM_HCTL 0x04e0 /* Host control */
-#define COMEM_HINT 0x04e4 /* Host interrupt control/status */
-#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */
-#define COMEM_LINT 0x04f4 /* Local interrupt contole status */
-#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */
-
-#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */
-
-
-/*
- * Commands and flags for use with Direct Access Register.
- */
-#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */
-#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */
-#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */
-#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */
-#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */
-#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */
-#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */
-#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */
-
-#define COMEM_DA_ADDR(a) ((a) & 0xffffe000)
-
-#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff)
-
-
-/*
- * The PCI bus will be limited in what slots will actually be used.
- * Define valid device numbers for different boards.
- */
-#if defined(CONFIG_M5407C3)
-#define COMEM_MINDEV 14 /* Minimum valid DEVICE */
-#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */
-#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */
-#else
-#define COMEM_MINDEV 0 /* Minimum valid DEVICE */
-#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */
-#endif
-
-#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */
-
-
-/****************************************************************************/
-#endif /* anchor_h */
diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h
index 0392b28..c0cb363 100644
--- a/arch/m68k/include/asm/atarihw.h
+++ b/arch/m68k/include/asm/atarihw.h
@@ -30,6 +30,8 @@
extern int atari_rtc_year_offset;
extern int atari_dont_touch_floppy_select;
+extern int atari_SCC_reset_done;
+
/* convenience macros for testing machine type */
#define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST)
#define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
index 65c6be6..4eba796 100644
--- a/arch/m68k/include/asm/atomic.h
+++ b/arch/m68k/include/asm/atomic.h
@@ -55,6 +55,16 @@
return c != 0;
}
+static inline int atomic_dec_and_test_lt(atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__(
+ "subql #1,%1; slt %0"
+ : "=d" (c), "=m" (*v)
+ : "m" (*v));
+ return c != 0;
+}
+
static inline int atomic_inc_and_test(atomic_t *v)
{
char c;
diff --git a/arch/m68k/include/asm/blinken.h b/arch/m68k/include/asm/blinken.h
index 1a749cf..0626582 100644
--- a/arch/m68k/include/asm/blinken.h
+++ b/arch/m68k/include/asm/blinken.h
@@ -17,15 +17,15 @@
#define HP300_LEDS 0xf001ffff
-extern unsigned char ledstate;
+extern unsigned char hp300_ledstate;
static __inline__ void blinken_leds(int on, int off)
{
if (MACH_IS_HP300)
{
- ledstate |= on;
- ledstate &= ~off;
- out_8(HP300_LEDS, ~ledstate);
+ hp300_ledstate |= on;
+ hp300_ledstate &= ~off;
+ out_8(HP300_LEDS, ~hp300_ledstate);
}
}
diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h
index 73de7c8..8104bd8 100644
--- a/arch/m68k/include/asm/cacheflush_mm.h
+++ b/arch/m68k/include/asm/cacheflush_mm.h
@@ -2,23 +2,89 @@
#define _M68K_CACHEFLUSH_H
#include <linux/mm.h>
+#ifdef CONFIG_COLDFIRE
+#include <asm/mcfsim.h>
+#endif
/* cache code */
#define FLUSH_I_AND_D (0x00000808)
#define FLUSH_I (0x00000008)
+#ifndef ICACHE_MAX_ADDR
+#define ICACHE_MAX_ADDR 0
+#define ICACHE_SET_MASK 0
+#define DCACHE_MAX_ADDR 0
+#define DCACHE_SETMASK 0
+#endif
+
+static inline void flush_cf_icache(unsigned long start, unsigned long end)
+{
+ unsigned long set;
+
+ for (set = start; set <= end; set += (0x10 - 3)) {
+ __asm__ __volatile__ (
+ "cpushl %%ic,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%ic,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%ic,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%ic,(%0)"
+ : "=a" (set)
+ : "a" (set));
+ }
+}
+
+static inline void flush_cf_dcache(unsigned long start, unsigned long end)
+{
+ unsigned long set;
+
+ for (set = start; set <= end; set += (0x10 - 3)) {
+ __asm__ __volatile__ (
+ "cpushl %%dc,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%dc,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%dc,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%dc,(%0)"
+ : "=a" (set)
+ : "a" (set));
+ }
+}
+
+static inline void flush_cf_bcache(unsigned long start, unsigned long end)
+{
+ unsigned long set;
+
+ for (set = start; set <= end; set += (0x10 - 3)) {
+ __asm__ __volatile__ (
+ "cpushl %%bc,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%bc,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%bc,(%0)\n\t"
+ "addq%.l #1,%0\n\t"
+ "cpushl %%bc,(%0)"
+ : "=a" (set)
+ : "a" (set));
+ }
+}
+
/*
* Cache handling functions
*/
static inline void flush_icache(void)
{
- if (CPU_IS_040_OR_060)
+ if (CPU_IS_COLDFIRE) {
+ flush_cf_icache(0, ICACHE_MAX_ADDR);
+ } else if (CPU_IS_040_OR_060) {
asm volatile ( "nop\n"
" .chip 68040\n"
" cpusha %bc\n"
" .chip 68k");
- else {
+ } else {
unsigned long tmp;
asm volatile ( "movec %%cacr,%0\n"
" or.w %1,%0\n"
@@ -51,12 +117,14 @@
process changes. */
#define __flush_cache_all() \
({ \
- if (CPU_IS_040_OR_060) \
+ if (CPU_IS_COLDFIRE) { \
+ flush_cf_dcache(0, DCACHE_MAX_ADDR); \
+ } else if (CPU_IS_040_OR_060) { \
__asm__ __volatile__("nop\n\t" \
".chip 68040\n\t" \
"cpusha %dc\n\t" \
".chip 68k"); \
- else { \
+ } else { \
unsigned long _tmp; \
__asm__ __volatile__("movec %%cacr,%0\n\t" \
"orw %1,%0\n\t" \
@@ -112,7 +180,17 @@
/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
static inline void __flush_page_to_ram(void *vaddr)
{
- if (CPU_IS_040_OR_060) {
+ if (CPU_IS_COLDFIRE) {
+ unsigned long addr, start, end;
+ addr = ((unsigned long) vaddr) & ~(PAGE_SIZE - 1);
+ start = addr & ICACHE_SET_MASK;
+ end = (addr + PAGE_SIZE - 1) & ICACHE_SET_MASK;
+ if (start > end) {
+ flush_cf_bcache(0, end);
+ end = ICACHE_MAX_ADDR;
+ }
+ flush_cf_bcache(start, end);
+ } else if (CPU_IS_040_OR_060) {
__asm__ __volatile__("nop\n\t"
".chip 68040\n\t"
"cpushp %%bc,(%0)\n\t"
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
index ec51448..2f88d86 100644
--- a/arch/m68k/include/asm/checksum.h
+++ b/arch/m68k/include/asm/checksum.h
@@ -3,6 +3,10 @@
#include <linux/in6.h>
+#ifdef CONFIG_GENERIC_CSUM
+#include <asm-generic/checksum.h>
+#else
+
/*
* computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit)
@@ -34,30 +38,6 @@
void *dst, int len,
__wsum sum);
-
-#ifdef CONFIG_COLDFIRE
-
-/*
- * The ColdFire cores don't support all the 68k instructions used
- * in the optimized checksum code below. So it reverts back to using
- * more standard C coded checksums. The fast checksum code is
- * significantly larger than the optimized version, so it is not
- * inlined here.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int tmp = (__force u32)sum;
-
- tmp = (tmp & 0xffff) + (tmp >> 16);
- tmp = (tmp & 0xffff) + (tmp >> 16);
-
- return (__force __sum16)~tmp;
-}
-
-#else
-
/*
* This is a version of ip_fast_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries.
@@ -97,8 +77,6 @@
return (__force __sum16)~sum;
}
-#endif /* CONFIG_COLDFIRE */
-
static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
@@ -167,4 +145,5 @@
return csum_fold(sum);
}
+#endif /* CONFIG_GENERIC_CSUM */
#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h
index edb6614..444ea8a 100644
--- a/arch/m68k/include/asm/div64.h
+++ b/arch/m68k/include/asm/div64.h
@@ -1,7 +1,9 @@
#ifndef _M68K_DIV64_H
#define _M68K_DIV64_H
-#ifdef CONFIG_MMU
+#ifdef CONFIG_CPU_HAS_NO_MULDIV64
+#include <asm-generic/div64.h>
+#else
#include <linux/types.h>
@@ -27,8 +29,6 @@
__rem; \
})
-#else
-#include <asm-generic/div64.h>
-#endif /* CONFIG_MMU */
+#endif /* CONFIG_CPU_HAS_NO_MULDIV64 */
#endif /* _M68K_DIV64_H */
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
index 01c193d..e9b7cda 100644
--- a/arch/m68k/include/asm/elf.h
+++ b/arch/m68k/include/asm/elf.h
@@ -59,10 +59,10 @@
is actually used on ASV. */
#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
-#ifndef CONFIG_SUN3
-#define ELF_EXEC_PAGESIZE 4096
-#else
+#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE)
#define ELF_EXEC_PAGESIZE 8192
+#else
+#define ELF_EXEC_PAGESIZE 4096
#endif
/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
index c3c5a86..622138d 100644
--- a/arch/m68k/include/asm/entry.h
+++ b/arch/m68k/include/asm/entry.h
@@ -222,16 +222,24 @@
* Non-MMU systems do not reserve %a2 in this way, and this definition is
* not used for them.
*/
+#ifdef CONFIG_MMU
+
#define curptr a2
#define GET_CURRENT(tmp) get_current tmp
.macro get_current reg=%d0
movel %sp,\reg
- andw #-THREAD_SIZE,\reg
+ andl #-THREAD_SIZE,\reg
movel \reg,%curptr
movel %curptr@,%curptr
.endm
+#else
+
+#define GET_CURRENT(tmp)
+
+#endif /* CONFIG_MMU */
+
#else /* C source */
#define STR(X) STR1(X)
diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h
index ffb6b8c..526db9d 100644
--- a/arch/m68k/include/asm/fpu.h
+++ b/arch/m68k/include/asm/fpu.h
@@ -12,6 +12,8 @@
#define FPSTATESIZE (96)
#elif defined(CONFIG_M68KFPU_EMU)
#define FPSTATESIZE (28)
+#elif defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
+#define FPSTATESIZE (16)
#elif defined(CONFIG_M68060)
#define FPSTATESIZE (12)
#else
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index b204683..00d0071 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -225,7 +225,8 @@
static inline int gpio_to_irq(unsigned gpio)
{
- return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL;
+ return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE
+ : __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned irq)
diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h
index a623ea3..84c7e51 100644
--- a/arch/m68k/include/asm/ipcbuf.h
+++ b/arch/m68k/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __m68k_IPCBUF_H__
-#define __m68k_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __m68k_IPCBUF_H__ */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 6198df5..0e89fa0 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -25,7 +25,8 @@
#define NR_IRQS 0
#endif
-#ifdef CONFIG_MMU
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030) || \
+ defined(CONFIG_M68040) || defined(CONFIG_M68060)
/*
* Interrupt source definitions
@@ -80,7 +81,7 @@
#else
#define irq_canonicalize(irq) (irq)
-#endif /* CONFIG_MMU */
+#endif /* !(CONFIG_M68020 || CONFIG_M68030 || CONFIG_M68040 || CONFIG_M68060) */
asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
extern atomic_t irq_err_count;
diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
index 16a1835..47906aa 100644
--- a/arch/m68k/include/asm/m54xxacr.h
+++ b/arch/m68k/include/asm/m54xxacr.h
@@ -39,8 +39,12 @@
#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
#define ACR_CM 0x00000060 /* Cache mode mask */
+#define ACR_SP 0x00000008 /* Supervisor protect */
#define ACR_WPROTECT 0x00000004 /* Write protect */
+#define ACR_BA(x) ((x) & 0xff000000)
+#define ACR_ADMSK(x) ((((x) - 1) & 0xff000000) >> 8)
+
#if defined(CONFIG_M5407)
#define ICACHE_SIZE 0x4000 /* instruction - 16k */
@@ -56,6 +60,11 @@
#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */
#define CACHE_WAYS 4 /* 4 ways */
+#define ICACHE_SET_MASK ((ICACHE_SIZE / 64 - 1) << CACHE_WAYS)
+#define DCACHE_SET_MASK ((DCACHE_SIZE / 64 - 1) << CACHE_WAYS)
+#define ICACHE_MAX_ADDR ICACHE_SET_MASK
+#define DCACHE_MAX_ADDR DCACHE_SET_MASK
+
/*
* Version 4 cores have a true harvard style separate instruction
* and data cache. Enable data and instruction caches, also enable write
@@ -73,6 +82,27 @@
#else
#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP)
#endif
+#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
+
+#if defined(CONFIG_MMU)
+/*
+ * If running with the MMU enabled then we need to map the internal
+ * register region as non-cacheable. And then we map all our RAM as
+ * cacheable and supervisor access only.
+ */
+#define ACR0_MODE (ACR_BA(CONFIG_MBAR)+ACR_ADMSK(0x1000000)+ \
+ ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP)
+#define ACR1_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \
+ ACR_ENABLE+ACR_SUPER+ACR_SP)
+#define ACR2_MODE 0
+#define ACR3_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \
+ ACR_ENABLE+ACR_SUPER+ACR_SP)
+
+#else
+
+/*
+ * For the non-MMU enabled case we map all of RAM as cacheable.
+ */
#if defined(CONFIG_CACHE_COPYBACK)
#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP)
#else
@@ -80,7 +110,6 @@
#endif
#define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY)
-#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
#define CACHE_INVALIDATE (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
#define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA)
#define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA)
@@ -94,4 +123,5 @@
#define CACHE_PUSH
#endif
+#endif /* CONFIG_MMU */
#endif /* m54xxacr_h */
diff --git a/arch/m68k/include/asm/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h
index c2a042b..a2d32f6 100644
--- a/arch/m68k/include/asm/mac_baboon.h
+++ b/arch/m68k/include/asm/mac_baboon.h
@@ -29,4 +29,10 @@
*/
};
+extern int baboon_present;
+
+extern void baboon_register_interrupts(void);
+extern void baboon_irq_enable(int);
+extern void baboon_irq_disable(int);
+
#endif /* __ASSEMBLY **/
diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
index a2c7e6f..fde874a 100644
--- a/arch/m68k/include/asm/mac_iop.h
+++ b/arch/m68k/include/asm/mac_iop.h
@@ -159,4 +159,6 @@
extern void iop_download_code(uint, __u8 *, uint, __u16);
extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16);
+extern void iop_register_interrupts(void);
+
#endif /* __ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h
index 3cf2b6e..425fbff4 100644
--- a/arch/m68k/include/asm/mac_oss.h
+++ b/arch/m68k/include/asm/mac_oss.h
@@ -58,25 +58,6 @@
#define OSS_POWEROFF 0x80
-/*
- * OSS Interrupt levels for various sub-systems
- *
- * This mapping is laid out with two things in mind: first, we try to keep
- * things on their own levels to avoid having to do double-dispatches. Second,
- * the levels match as closely as possible the alternate IRQ mapping mode (aka
- * "A/UX mode") available on some VIA machines.
- */
-
-#define OSS_IRQLEV_DISABLED 0
-#define OSS_IRQLEV_IOPISM 1 /* ADB? */
-#define OSS_IRQLEV_SCSI IRQ_AUTO_2
-#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 /* keep this on its own level */
-#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 /* matches VIA alternate mapping */
-#define OSS_IRQLEV_SOUND IRQ_AUTO_5 /* matches VIA alternate mapping */
-#define OSS_IRQLEV_60HZ 6 /* matches VIA alternate mapping */
-#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 /* matches VIA alternate mapping */
-#define OSS_IRQLEV_PARITY 7 /* matches VIA alternate mapping */
-
#ifndef __ASSEMBLY__
struct mac_oss {
@@ -91,4 +72,8 @@
extern volatile struct mac_oss *oss;
extern int oss_present;
+extern void oss_register_interrupts(void);
+extern void oss_irq_enable(int);
+extern void oss_irq_disable(int);
+
#endif /* __ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/mac_psc.h b/arch/m68k/include/asm/mac_psc.h
index 7808bb0..e5c0d71 100644
--- a/arch/m68k/include/asm/mac_psc.h
+++ b/arch/m68k/include/asm/mac_psc.h
@@ -211,6 +211,10 @@
extern volatile __u8 *psc;
extern int psc_present;
+extern void psc_register_interrupts(void);
+extern void psc_irq_enable(int);
+extern void psc_irq_disable(int);
+
/*
* Access functions
*/
diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h
index a59665e..aeeedf8 100644
--- a/arch/m68k/include/asm/mac_via.h
+++ b/arch/m68k/include/asm/mac_via.h
@@ -254,6 +254,15 @@
extern volatile __u8 *via1,*via2;
extern int rbv_present,via_alt_mapping;
+extern void via_register_interrupts(void);
+extern void via_irq_enable(int);
+extern void via_irq_disable(int);
+extern void via_nubus_irq_startup(int irq);
+extern void via_nubus_irq_shutdown(int irq);
+extern void via1_irq(unsigned int irq, struct irq_desc *desc);
+extern void via1_set_head(int);
+extern int via2_scsi_drq_pending(void);
+
static inline int rbv_set_video_bpp(int bpp)
{
char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h
index 12ebe43..682a1a2 100644
--- a/arch/m68k/include/asm/macintosh.h
+++ b/arch/m68k/include/asm/macintosh.h
@@ -11,17 +11,11 @@
extern void mac_reset(void);
extern void mac_poweroff(void);
extern void mac_init_IRQ(void);
-extern int mac_irq_pending(unsigned int);
+
extern void mac_irq_enable(struct irq_data *data);
extern void mac_irq_disable(struct irq_data *data);
/*
- * Floppy driver magic hook - probably shouldn't be here
- */
-
-extern void via1_set_head(int);
-
-/*
* Macintosh Table
*/
@@ -48,7 +42,7 @@
#define MAC_ADB_IOP 6
#define MAC_VIA_II 1
-#define MAC_VIA_IIci 2
+#define MAC_VIA_IICI 2
#define MAC_VIA_QUADRA 3
#define MAC_SCSI_NONE 0
diff --git a/arch/m68k/include/asm/macints.h b/arch/m68k/include/asm/macints.h
index ebe1b70..92aa8a4 100644
--- a/arch/m68k/include/asm/macints.h
+++ b/arch/m68k/include/asm/macints.h
@@ -104,6 +104,9 @@
#define IRQ_PSC4_3 (35)
#define IRQ_MAC_MACE_DMA IRQ_PSC4_3
+/* OSS Level 4 interrupts */
+#define IRQ_MAC_SCC (33)
+
/* Level 5 (PSC, AV Macs only) interrupts */
#define IRQ_PSC5_0 (40)
#define IRQ_PSC5_1 (41)
@@ -131,9 +134,6 @@
#define IRQ_BABOON_2 (66)
#define IRQ_BABOON_3 (67)
-/* On non-PSC machines, the serial ports share an IRQ */
-#define IRQ_MAC_SCC IRQ_AUTO_4
-
#define SLOT2IRQ(x) (x + 47)
#define IRQ2SLOT(x) (x - 47)
diff --git a/arch/m68k/include/asm/mcf_pgalloc.h b/arch/m68k/include/asm/mcf_pgalloc.h
new file mode 100644
index 0000000..313f3dd
--- /dev/null
+++ b/arch/m68k/include/asm/mcf_pgalloc.h
@@ -0,0 +1,102 @@
+#ifndef M68K_MCF_PGALLOC_H
+#define M68K_MCF_PGALLOC_H
+
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long) pte);
+}
+
+extern const char bad_pmd_string[];
+
+extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT);
+
+ if (!page)
+ return NULL;
+
+ memset((void *)page, 0, PAGE_SIZE);
+ return (pte_t *) (page);
+}
+
+extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address)
+{
+ return (pmd_t *) pgd;
+}
+
+#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
+#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
+
+#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr)
+
+#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \
+ (unsigned long)(page_address(page)))
+
+#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte))
+
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
+ unsigned long address)
+{
+ __free_page(page);
+}
+
+#define __pmd_free_tlb(tlb, pmd, address) do { } while (0)
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0);
+ pte_t *pte;
+
+ if (!page)
+ return NULL;
+
+ pte = kmap(page);
+ if (pte) {
+ clear_page(pte);
+ __flush_page_to_ram(pte);
+ flush_tlb_kernel_page(pte);
+ nocache_page(pte);
+ }
+ kunmap(page);
+
+ return page;
+}
+
+extern inline void pte_free(struct mm_struct *mm, struct page *page)
+{
+ __free_page(page);
+}
+
+/*
+ * In our implementation, each pgd entry contains 1 pmd that is never allocated
+ * or freed. pgd_present is always 1, so this should never be called. -NL
+ */
+#define pmd_free(mm, pmd) BUG()
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ free_page((unsigned long) pgd);
+}
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *new_pgd;
+
+ new_pgd = (pgd_t *)__get_free_page(GFP_DMA | __GFP_NOWARN);
+ if (!new_pgd)
+ return NULL;
+ memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
+ memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT);
+ return new_pgd;
+}
+
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#endif /* M68K_MCF_PGALLOC_H */
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
new file mode 100644
index 0000000..756bde4
--- /dev/null
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -0,0 +1,425 @@
+#ifndef _MCF_PGTABLE_H
+#define _MCF_PGTABLE_H
+
+#include <asm/mcfmmu.h>
+#include <asm/page.h>
+
+/*
+ * MMUDR bits, in proper place. We write these directly into the MMUDR
+ * after masking from the pte.
+ */
+#define CF_PAGE_LOCKED MMUDR_LK /* 0x00000002 */
+#define CF_PAGE_EXEC MMUDR_X /* 0x00000004 */
+#define CF_PAGE_WRITABLE MMUDR_W /* 0x00000008 */
+#define CF_PAGE_READABLE MMUDR_R /* 0x00000010 */
+#define CF_PAGE_SYSTEM MMUDR_SP /* 0x00000020 */
+#define CF_PAGE_COPYBACK MMUDR_CM_CCB /* 0x00000040 */
+#define CF_PAGE_NOCACHE MMUDR_CM_NCP /* 0x00000080 */
+
+#define CF_CACHEMASK (~MMUDR_CM_CCB)
+#define CF_PAGE_MMUDR_MASK 0x000000fe
+
+#define _PAGE_NOCACHE030 CF_PAGE_NOCACHE
+
+/*
+ * MMUTR bits, need shifting down.
+ */
+#define CF_PAGE_MMUTR_MASK 0x00000c00
+#define CF_PAGE_MMUTR_SHIFT 10
+
+#define CF_PAGE_VALID (MMUTR_V << CF_PAGE_MMUTR_SHIFT)
+#define CF_PAGE_SHARED (MMUTR_SG << CF_PAGE_MMUTR_SHIFT)
+
+/*
+ * Fake bits, not implemented in CF, will get masked out before
+ * hitting hardware.
+ */
+#define CF_PAGE_DIRTY 0x00000001
+#define CF_PAGE_FILE 0x00000200
+#define CF_PAGE_ACCESSED 0x00001000
+
+#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */
+#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */
+#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */
+#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */
+#define _DESCTYPE_MASK 0x003
+#define _CACHEMASK040 (~0x060)
+#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */
+
+/*
+ * Externally used page protection values.
+ */
+#define _PAGE_PRESENT (CF_PAGE_VALID)
+#define _PAGE_ACCESSED (CF_PAGE_ACCESSED)
+#define _PAGE_DIRTY (CF_PAGE_DIRTY)
+#define _PAGE_READWRITE (CF_PAGE_READABLE \
+ | CF_PAGE_WRITABLE \
+ | CF_PAGE_SYSTEM \
+ | CF_PAGE_SHARED)
+
+/*
+ * Compound page protection values.
+ */
+#define PAGE_NONE __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED)
+
+#define PAGE_SHARED __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_SHARED)
+
+#define PAGE_INIT __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_READABLE \
+ | CF_PAGE_WRITABLE \
+ | CF_PAGE_EXEC \
+ | CF_PAGE_SYSTEM)
+
+#define PAGE_KERNEL __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_READABLE \
+ | CF_PAGE_WRITABLE \
+ | CF_PAGE_EXEC \
+ | CF_PAGE_SYSTEM)
+
+#define PAGE_COPY __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_READABLE \
+ | CF_PAGE_DIRTY)
+
+/*
+ * Page protections for initialising protection_map. See mm/mmap.c
+ * for use. In general, the bit positions are xwr, and P-items are
+ * private, the S-items are shared.
+ */
+#define __P000 PAGE_NONE
+#define __P001 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_READABLE)
+#define __P010 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_WRITABLE)
+#define __P011 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_READABLE \
+ | CF_PAGE_WRITABLE)
+#define __P100 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_EXEC)
+#define __P101 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_READABLE \
+ | CF_PAGE_EXEC)
+#define __P110 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_WRITABLE \
+ | CF_PAGE_EXEC)
+#define __P111 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_READABLE \
+ | CF_PAGE_WRITABLE \
+ | CF_PAGE_EXEC)
+
+#define __S000 PAGE_NONE
+#define __S001 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_READABLE)
+#define __S010 PAGE_SHARED
+#define __S011 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_SHARED \
+ | CF_PAGE_READABLE)
+#define __S100 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_EXEC)
+#define __S101 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_READABLE \
+ | CF_PAGE_EXEC)
+#define __S110 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_SHARED \
+ | CF_PAGE_EXEC)
+#define __S111 __pgprot(CF_PAGE_VALID \
+ | CF_PAGE_ACCESSED \
+ | CF_PAGE_SHARED \
+ | CF_PAGE_READABLE \
+ | CF_PAGE_EXEC)
+
+#define PTE_MASK PAGE_MASK
+#define CF_PAGE_CHG_MASK (PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+#define pmd_set(pmdp, ptep) do {} while (0)
+
+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
+{
+ pgd_val(*pgdp) = virt_to_phys(pmdp);
+}
+
+#define __pte_page(pte) ((unsigned long) (pte_val(pte) & PAGE_MASK))
+#define __pmd_page(pmd) ((unsigned long) (pmd_val(pmd)))
+
+static inline int pte_none(pte_t pte)
+{
+ return !pte_val(pte);
+}
+
+static inline int pte_present(pte_t pte)
+{
+ return pte_val(pte) & CF_PAGE_VALID;
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ pte_val(*ptep) = 0;
+}
+
+#define pte_pagenr(pte) ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
+#define pte_page(pte) virt_to_page(__pte_page(pte))
+
+static inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); }
+#define pmd_none(pmd) pmd_none2(&(pmd))
+static inline int pmd_bad2(pmd_t *pmd) { return 0; }
+#define pmd_bad(pmd) pmd_bad2(&(pmd))
+#define pmd_present(pmd) (!pmd_none2(&(pmd)))
+static inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; }
+
+static inline int pgd_none(pgd_t pgd) { return 0; }
+static inline int pgd_bad(pgd_t pgd) { return 0; }
+static inline int pgd_present(pgd_t pgd) { return 1; }
+static inline void pgd_clear(pgd_t *pgdp) {}
+
+#define pte_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+ __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \
+ __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+ __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not...
+ * [we have the full set here even if they don't change from m68k]
+ */
+static inline int pte_read(pte_t pte)
+{
+ return pte_val(pte) & CF_PAGE_READABLE;
+}
+
+static inline int pte_write(pte_t pte)
+{
+ return pte_val(pte) & CF_PAGE_WRITABLE;
+}
+
+static inline int pte_exec(pte_t pte)
+{
+ return pte_val(pte) & CF_PAGE_EXEC;
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+ return pte_val(pte) & CF_PAGE_DIRTY;
+}
+
+static inline int pte_young(pte_t pte)
+{
+ return pte_val(pte) & CF_PAGE_ACCESSED;
+}
+
+static inline int pte_file(pte_t pte)
+{
+ return pte_val(pte) & CF_PAGE_FILE;
+}
+
+static inline int pte_special(pte_t pte)
+{
+ return 0;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~CF_PAGE_WRITABLE;
+ return pte;
+}
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+ pte_val(pte) &= ~CF_PAGE_READABLE;
+ return pte;
+}
+
+static inline pte_t pte_exprotect(pte_t pte)
+{
+ pte_val(pte) &= ~CF_PAGE_EXEC;
+ return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+ pte_val(pte) &= ~CF_PAGE_DIRTY;
+ return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+ pte_val(pte) &= ~CF_PAGE_ACCESSED;
+ return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte_val(pte) |= CF_PAGE_WRITABLE;
+ return pte;
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+ pte_val(pte) |= CF_PAGE_READABLE;
+ return pte;
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{
+ pte_val(pte) |= CF_PAGE_EXEC;
+ return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+ pte_val(pte) |= CF_PAGE_DIRTY;
+ return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+ pte_val(pte) |= CF_PAGE_ACCESSED;
+ return pte;
+}
+
+static inline pte_t pte_mknocache(pte_t pte)
+{
+ pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40);
+ return pte;
+}
+
+static inline pte_t pte_mkcache(pte_t pte)
+{
+ pte_val(pte) &= ~CF_PAGE_NOCACHE;
+ return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+ return pte;
+}
+
+#define swapper_pg_dir kernel_pg_dir
+extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
+
+/*
+ * Find an entry in a pagetable directory.
+ */
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * Find an entry in a kernel pagetable directory.
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * Find an entry in the second-level pagetable.
+ */
+static inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address)
+{
+ return (pmd_t *) pgd;
+}
+
+/*
+ * Find an entry in the third-level pagetable.
+ */
+#define __pte_offset(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *) __pmd_page(*(dir)) + __pte_offset(address))
+
+/*
+ * Disable caching for page at given kernel virtual address.
+ */
+static inline void nocache_page(void *vaddr)
+{
+ pgd_t *dir;
+ pmd_t *pmdp;
+ pte_t *ptep;
+ unsigned long addr = (unsigned long) vaddr;
+
+ dir = pgd_offset_k(addr);
+ pmdp = pmd_offset(dir, addr);
+ ptep = pte_offset_kernel(pmdp, addr);
+ *ptep = pte_mknocache(*ptep);
+}
+
+/*
+ * Enable caching for page at given kernel virtual address.
+ */
+static inline void cache_page(void *vaddr)
+{
+ pgd_t *dir;
+ pmd_t *pmdp;
+ pte_t *ptep;
+ unsigned long addr = (unsigned long) vaddr;
+
+ dir = pgd_offset_k(addr);
+ pmdp = pmd_offset(dir, addr);
+ ptep = pte_offset_kernel(pmdp, addr);
+ *ptep = pte_mkcache(*ptep);
+}
+
+#define PTE_FILE_MAX_BITS 21
+#define PTE_FILE_SHIFT 11
+
+static inline unsigned long pte_to_pgoff(pte_t pte)
+{
+ return pte_val(pte) >> PTE_FILE_SHIFT;
+}
+
+static inline pte_t pgoff_to_pte(unsigned pgoff)
+{
+ return __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE);
+}
+
+/*
+ * Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e))
+ */
+#define __swp_type(x) ((x).val & 0xFF)
+#define __swp_offset(x) ((x).val >> PTE_FILE_SHIFT)
+#define __swp_entry(typ, off) ((swp_entry_t) { (typ) | \
+ (off << PTE_FILE_SHIFT) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) (__pte((x).val))
+
+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+
+#define pte_offset_map(pmdp, addr) ((pte_t *)__pmd_page(*pmdp) + \
+ __pte_offset(addr))
+#define pte_unmap(pte) ((void) 0)
+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _MCF_PGTABLE_H */
diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h
new file mode 100644
index 0000000..26cc3d5
--- /dev/null
+++ b/arch/m68k/include/asm/mcfmmu.h
@@ -0,0 +1,112 @@
+/*
+ * mcfmmu.h -- definitions for the ColdFire v4e MMU
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef MCFMMU_H
+#define MCFMMU_H
+
+/*
+ * The MMU support registers are mapped into the address space using
+ * the processor MMUBASE register. We used a fixed address for mapping,
+ * there doesn't seem any need to make this configurable yet.
+ */
+#define MMUBASE 0xfe000000
+
+/*
+ * The support registers of the MMU. Names are the sames as those
+ * used in the Freescale v4e documentation.
+ */
+#define MMUCR (MMUBASE + 0x00) /* Control register */
+#define MMUOR (MMUBASE + 0x04) /* Operation register */
+#define MMUSR (MMUBASE + 0x08) /* Status register */
+#define MMUAR (MMUBASE + 0x10) /* TLB Address register */
+#define MMUTR (MMUBASE + 0x14) /* TLB Tag register */
+#define MMUDR (MMUBASE + 0x18) /* TLB Data register */
+
+/*
+ * MMU Control register bit flags
+ */
+#define MMUCR_EN 0x00000001 /* Virtual mode enable */
+#define MMUCR_ASM 0x00000002 /* Address space mode */
+
+/*
+ * MMU Operation register.
+ */
+#define MMUOR_UAA 0x00000001 /* Update allocatiom address */
+#define MMUOR_ACC 0x00000002 /* TLB access */
+#define MMUOR_RD 0x00000004 /* TLB access read */
+#define MMUOR_WR 0x00000000 /* TLB access write */
+#define MMUOR_ADR 0x00000008 /* TLB address select */
+#define MMUOR_ITLB 0x00000010 /* ITLB operation */
+#define MMUOR_CAS 0x00000020 /* Clear non-locked ASID TLBs */
+#define MMUOR_CNL 0x00000040 /* Clear non-locked TLBs */
+#define MMUOR_CA 0x00000080 /* Clear all TLBs */
+#define MMUOR_STLB 0x00000100 /* Search TLBs */
+#define MMUOR_AAN 16 /* TLB allocation address */
+#define MMUOR_AAMASK 0xffff0000 /* AA mask */
+
+/*
+ * MMU Status register.
+ */
+#define MMUSR_HIT 0x00000002 /* Search TLB hit */
+#define MMUSR_WF 0x00000008 /* Write access fault */
+#define MMUSR_RF 0x00000010 /* Read access fault */
+#define MMUSR_SPF 0x00000020 /* Supervisor protect fault */
+
+/*
+ * MMU Read/Write Tag register.
+ */
+#define MMUTR_V 0x00000001 /* Valid */
+#define MMUTR_SG 0x00000002 /* Shared global */
+#define MMUTR_IDN 2 /* Address Space ID */
+#define MMUTR_IDMASK 0x000003fc /* ASID mask */
+#define MMUTR_VAN 10 /* Virtual Address */
+#define MMUTR_VAMASK 0xfffffc00 /* VA mask */
+
+/*
+ * MMU Read/Write Data register.
+ */
+#define MMUDR_LK 0x00000002 /* Lock entry */
+#define MMUDR_X 0x00000004 /* Execute access enable */
+#define MMUDR_W 0x00000008 /* Write access enable */
+#define MMUDR_R 0x00000010 /* Read access enable */
+#define MMUDR_SP 0x00000020 /* Supervisor access enable */
+#define MMUDR_CM_CWT 0x00000000 /* Cachable write thru */
+#define MMUDR_CM_CCB 0x00000040 /* Cachable copy back */
+#define MMUDR_CM_NCP 0x00000080 /* Non-cachable precise */
+#define MMUDR_CM_NCI 0x000000c0 /* Non-cachable imprecise */
+#define MMUDR_SZ_1MB 0x00000000 /* 1MB page size */
+#define MMUDR_SZ_4KB 0x00000100 /* 4kB page size */
+#define MMUDR_SZ_8KB 0x00000200 /* 8kB page size */
+#define MMUDR_SZ_1KB 0x00000300 /* 1kB page size */
+#define MMUDR_PAN 10 /* Physical address */
+#define MMUDR_PAMASK 0xfffffc00 /* PA mask */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Simple access functions for the MMU registers. Nothing fancy
+ * currently required, just simple 32bit access.
+ */
+static inline u32 mmu_read(u32 a)
+{
+ return *((volatile u32 *) a);
+}
+
+static inline void mmu_write(u32 a, u32 v)
+{
+ *((volatile u32 *) a) = v;
+ __asm__ __volatile__ ("nop");
+}
+
+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word);
+
+#endif
+
+#endif /* MCFMMU_H */
diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h
index 7d4341e..dc3be99 100644
--- a/arch/m68k/include/asm/mmu_context.h
+++ b/arch/m68k/include/asm/mmu_context.h
@@ -8,7 +8,206 @@
}
#ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
+
+#if defined(CONFIG_COLDFIRE)
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/mcfmmu.h>
+#include <asm/mmu.h>
+
+#define NO_CONTEXT 256
+#define LAST_CONTEXT 255
+#define FIRST_CONTEXT 1
+
+extern unsigned long context_map[];
+extern mm_context_t next_mmu_context;
+
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+ mm_context_t ctx;
+
+ if (mm->context != NO_CONTEXT)
+ return;
+ while (atomic_dec_and_test_lt(&nr_free_contexts)) {
+ atomic_inc(&nr_free_contexts);
+ steal_context();
+ }
+ ctx = next_mmu_context;
+ while (test_and_set_bit(ctx, context_map)) {
+ ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+ if (ctx > LAST_CONTEXT)
+ ctx = 0;
+ }
+ next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+ mm->context = ctx;
+ context_mm[ctx] = mm;
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+ if (mm->context != NO_CONTEXT) {
+ clear_bit(mm->context, context_map);
+ mm->context = NO_CONTEXT;
+ atomic_inc(&nr_free_contexts);
+ }
+}
+
+static inline void set_context(mm_context_t context, pgd_t *pgd)
+{
+ __asm__ __volatile__ ("movec %0,%%asid" : : "d" (context));
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ get_mmu_context(tsk->mm);
+ set_context(tsk->mm->context, next->pgd);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *active_mm,
+ struct mm_struct *mm)
+{
+ get_mmu_context(mm);
+ set_context(mm->context, mm->pgd);
+}
+
+#define deactivate_mm(tsk, mm) do { } while (0)
+
+extern void mmu_context_init(void);
+#define prepare_arch_switch(next) load_ksp_mmu(next)
+
+static inline void load_ksp_mmu(struct task_struct *task)
+{
+ unsigned long flags;
+ struct mm_struct *mm;
+ int asid;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ unsigned long mmuar;
+
+ local_irq_save(flags);
+ mmuar = task->thread.ksp;
+
+ /* Search for a valid TLB entry, if one is found, don't remap */
+ mmu_write(MMUAR, mmuar);
+ mmu_write(MMUOR, MMUOR_STLB | MMUOR_ADR);
+ if (mmu_read(MMUSR) & MMUSR_HIT)
+ goto end;
+
+ if (mmuar >= PAGE_OFFSET) {
+ mm = &init_mm;
+ } else {
+ pr_info("load_ksp_mmu: non-kernel mm found: 0x%p\n", task->mm);
+ mm = task->mm;
+ }
+
+ if (!mm)
+ goto bug;
+
+ pgd = pgd_offset(mm, mmuar);
+ if (pgd_none(*pgd))
+ goto bug;
+
+ pmd = pmd_offset(pgd, mmuar);
+ if (pmd_none(*pmd))
+ goto bug;
+
+ pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar)
+ : pte_offset_map(pmd, mmuar);
+ if (pte_none(*pte) || !pte_present(*pte))
+ goto bug;
+
+ set_pte(pte, pte_mkyoung(*pte));
+ asid = mm->context & 0xff;
+ if (!pte_dirty(*pte) && mmuar <= PAGE_OFFSET)
+ set_pte(pte, pte_wrprotect(*pte));
+
+ mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
+ (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
+ >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+
+ mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
+ ((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
+
+ mmu_write(MMUOR, MMUOR_ACC | MMUOR_UAA);
+
+ goto end;
+
+bug:
+ pr_info("ksp load failed: mm=0x%p ksp=0x08%lx\n", mm, mmuar);
+end:
+ local_irq_restore(flags);
+}
+
+#elif defined(CONFIG_SUN3)
+#include <asm/sun3mmu.h>
+#include <linux/sched.h>
+
+extern unsigned long get_free_context(struct mm_struct *mm);
+extern void clear_context(unsigned long context);
+
+/* set the context for a new task to unmapped */
+static inline int init_new_context(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+ mm->context = SUN3_INVALID_CONTEXT;
+ return 0;
+}
+
+/* find the context given to this process, and if it hasn't already
+ got one, go get one for it. */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+ if (mm->context == SUN3_INVALID_CONTEXT)
+ mm->context = get_free_context(mm);
+}
+
+/* flush context if allocated... */
+static inline void destroy_context(struct mm_struct *mm)
+{
+ if (mm->context != SUN3_INVALID_CONTEXT)
+ clear_context(mm->context);
+}
+
+static inline void activate_context(struct mm_struct *mm)
+{
+ get_mmu_context(mm);
+ sun3_put_context(mm->context);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ activate_context(tsk->mm);
+}
+
+#define deactivate_mm(tsk, mm) do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+ struct mm_struct *next_mm)
+{
+ activate_context(next_mm);
+}
+
+#else
#include <asm/setup.h>
#include <asm/page.h>
@@ -103,55 +302,8 @@
switch_mm_0460(next_mm);
}
-#else /* CONFIG_SUN3 */
-#include <asm/sun3mmu.h>
-#include <linux/sched.h>
-
-extern unsigned long get_free_context(struct mm_struct *mm);
-extern void clear_context(unsigned long context);
-
-/* set the context for a new task to unmapped */
-static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
- mm->context = SUN3_INVALID_CONTEXT;
- return 0;
-}
-
-/* find the context given to this process, and if it hasn't already
- got one, go get one for it. */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
- if(mm->context == SUN3_INVALID_CONTEXT)
- mm->context = get_free_context(mm);
-}
-
-/* flush context if allocated... */
-static inline void destroy_context(struct mm_struct *mm)
-{
- if(mm->context != SUN3_INVALID_CONTEXT)
- clear_context(mm->context);
-}
-
-static inline void activate_context(struct mm_struct *mm)
-{
- get_mmu_context(mm);
- sun3_put_context(mm->context);
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
- activate_context(tsk->mm);
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
- struct mm_struct *next_mm)
-{
- activate_context(next_mm);
-}
-
#endif
+
#else /* !CONFIG_MMU */
static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
index 45bd3f5..e0fdd4d 100644
--- a/arch/m68k/include/asm/motorola_pgtable.h
+++ b/arch/m68k/include/asm/motorola_pgtable.h
@@ -8,6 +8,7 @@
#define _PAGE_PRESENT 0x001
#define _PAGE_SHORT 0x002
#define _PAGE_RONLY 0x004
+#define _PAGE_READWRITE 0x000
#define _PAGE_ACCESSED 0x008
#define _PAGE_DIRTY 0x010
#define _PAGE_SUPER 0x080 /* 68040 supervisor only */
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
index dfebb7c..98baa82 100644
--- a/arch/m68k/include/asm/page.h
+++ b/arch/m68k/include/asm/page.h
@@ -6,10 +6,10 @@
#include <asm/page_offset.h>
/* PAGE_SHIFT determines the page size */
-#ifndef CONFIG_SUN3
-#define PAGE_SHIFT (12)
+#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE)
+#define PAGE_SHIFT 13
#else
-#define PAGE_SHIFT (13)
+#define PAGE_SHIFT 12
#endif
#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
@@ -36,6 +36,10 @@
#define __pgd(x) ((pgd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
+extern unsigned long _rambase;
+extern unsigned long _ramstart;
+extern unsigned long _ramend;
+
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_MMU
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index a8d1c60..9059572 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -5,9 +5,6 @@
extern unsigned long memory_start;
extern unsigned long memory_end;
-extern unsigned long _rambase;
-extern unsigned long _ramstart;
-extern unsigned long _ramend;
#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
#define free_user_page(page, addr) free_page(addr)
diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h
index 1780152..82626a8 100644
--- a/arch/m68k/include/asm/page_offset.h
+++ b/arch/m68k/include/asm/page_offset.h
@@ -1,11 +1,9 @@
/* This handles the memory map.. */
-#ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
-#define PAGE_OFFSET_RAW 0x00000000
-#else
+#if defined(CONFIG_RAMBASE)
+#define PAGE_OFFSET_RAW CONFIG_RAMBASE
+#elif defined(CONFIG_SUN3)
#define PAGE_OFFSET_RAW 0x0E000000
-#endif
#else
-#define PAGE_OFFSET_RAW CONFIG_RAMBASE
+#define PAGE_OFFSET_RAW 0x00000000
#endif
diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h
index c294aad..37bee7e 100644
--- a/arch/m68k/include/asm/pgalloc.h
+++ b/arch/m68k/include/asm/pgalloc.h
@@ -7,7 +7,9 @@
#ifdef CONFIG_MMU
#include <asm/virtconvert.h>
-#ifdef CONFIG_SUN3
+#if defined(CONFIG_COLDFIRE)
+#include <asm/mcf_pgalloc.h>
+#elif defined(CONFIG_SUN3)
#include <asm/sun3_pgalloc.h>
#else
#include <asm/motorola_pgalloc.h>
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 87174c9..dc35e0e 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -40,6 +40,8 @@
/* PGDIR_SHIFT determines what a third-level page table entry can map */
#ifdef CONFIG_SUN3
#define PGDIR_SHIFT 17
+#elif defined(CONFIG_COLDFIRE)
+#define PGDIR_SHIFT 22
#else
#define PGDIR_SHIFT 25
#endif
@@ -54,6 +56,10 @@
#define PTRS_PER_PTE 16
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 2048
+#elif defined(CONFIG_COLDFIRE)
+#define PTRS_PER_PTE 512
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PGD 1024
#else
#define PTRS_PER_PTE 1024
#define PTRS_PER_PMD 8
@@ -66,12 +72,22 @@
#ifdef CONFIG_SUN3
#define KMAP_START 0x0DC00000
#define KMAP_END 0x0E000000
+#elif defined(CONFIG_COLDFIRE)
+#define KMAP_START 0xe0000000
+#define KMAP_END 0xf0000000
#else
#define KMAP_START 0xd0000000
#define KMAP_END 0xf0000000
#endif
-#ifndef CONFIG_SUN3
+#ifdef CONFIG_SUN3
+extern unsigned long m68k_vmalloc_end;
+#define VMALLOC_START 0x0f800000
+#define VMALLOC_END m68k_vmalloc_end
+#elif defined(CONFIG_COLDFIRE)
+#define VMALLOC_START 0xd0000000
+#define VMALLOC_END 0xe0000000
+#else
/* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 8MB value just means that there will be a 8MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
@@ -82,11 +98,7 @@
#define VMALLOC_OFFSET (8*1024*1024)
#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
#define VMALLOC_END KMAP_START
-#else
-extern unsigned long m68k_vmalloc_end;
-#define VMALLOC_START 0x0f800000
-#define VMALLOC_END m68k_vmalloc_end
-#endif /* CONFIG_SUN3 */
+#endif
/* zero page used for uninitialized stuff */
extern void *empty_zero_page;
@@ -130,6 +142,8 @@
#ifdef CONFIG_SUN3
#include <asm/sun3_pgtable.h>
+#elif defined(CONFIG_COLDFIRE)
+#include <asm/mcf_pgtable.h>
#else
#include <asm/motorola_pgtable.h>
#endif
@@ -138,6 +152,9 @@
/*
* Macro to mark a page protection value as "uncacheable".
*/
+#ifdef CONFIG_COLDFIRE
+# define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE))
+#else
#ifdef SUN3_PAGE_NOCACHE
# define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE
#else
@@ -152,6 +169,7 @@
? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \
: (prot)))
+#endif /* CONFIG_COLDFIRE */
#include <asm-generic/pgtable.h>
#endif /* !__ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 568facf..46460fa 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -48,10 +48,12 @@
* so don't change it unless you know what you are doing.
*/
#ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
-#define TASK_SIZE (0xF0000000UL)
-#else
+#if defined(CONFIG_COLDFIRE)
+#define TASK_SIZE (0xC0000000UL)
+#elif defined(CONFIG_SUN3)
#define TASK_SIZE (0x0E000000UL)
+#else
+#define TASK_SIZE (0xF0000000UL)
#endif
#else
#define TASK_SIZE (0xFFFFFFFFUL)
@@ -66,10 +68,12 @@
* space during mmap's.
*/
#ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
-#define TASK_UNMAPPED_BASE 0xC0000000UL
-#else
+#if defined(CONFIG_COLDFIRE)
+#define TASK_UNMAPPED_BASE 0x60000000UL
+#elif defined(CONFIG_SUN3)
#define TASK_UNMAPPED_BASE 0x0A000000UL
+#else
+#define TASK_UNMAPPED_BASE 0xC0000000UL
#endif
#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr)
#else
@@ -88,14 +92,12 @@
unsigned long fp[8*3];
unsigned long fpcntl[3]; /* fp control regs */
unsigned char fpstate[FPSTATESIZE]; /* floating point state */
- struct thread_info info;
};
#define INIT_THREAD { \
.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
.sr = PS_S, \
.fs = __KERNEL_DS, \
- .info = INIT_THREAD_INFO(init_task), \
}
#ifdef CONFIG_MMU
diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h
index ee95921..0fa80e9 100644
--- a/arch/m68k/include/asm/segment.h
+++ b/arch/m68k/include/asm/segment.h
@@ -22,23 +22,26 @@
} mm_segment_t;
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define USER_DS MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
+#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES
/*
* Get/set the SFC/DFC registers for MOVES instructions
*/
+#define USER_DS MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
static inline mm_segment_t get_fs(void)
{
-#ifdef CONFIG_MMU
mm_segment_t _v;
__asm__ ("movec %/dfc,%0":"=r" (_v.seg):);
-
return _v;
-#else
- return USER_DS;
-#endif
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+ __asm__ __volatile__ ("movec %0,%/sfc\n\t"
+ "movec %0,%/dfc\n\t"
+ : /* no outputs */ : "r" (val.seg) : "memory");
}
static inline mm_segment_t get_ds(void)
@@ -47,14 +50,13 @@
return KERNEL_DS;
}
-static inline void set_fs(mm_segment_t val)
-{
-#ifdef CONFIG_MMU
- __asm__ __volatile__ ("movec %0,%/sfc\n\t"
- "movec %0,%/dfc\n\t"
- : /* no outputs */ : "r" (val.seg) : "memory");
+#else
+#define USER_DS MAKE_MM_SEG(TASK_SIZE)
+#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
#endif
-}
#define segment_eq(a,b) ((a).seg == (b).seg)
diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h
index 2b90d6e..7267536 100644
--- a/arch/m68k/include/asm/serial.h
+++ b/arch/m68k/include/asm/serial.h
@@ -25,9 +25,11 @@
#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
#endif
+#ifdef CONFIG_ISA
#define SERIAL_PORT_DFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
+#endif
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
index 4dfb395..00c2c53 100644
--- a/arch/m68k/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup.h
@@ -40,6 +40,7 @@
#define MACH_HP300 9
#define MACH_Q40 10
#define MACH_SUN3X 11
+#define MACH_M54XX 12
#define COMMAND_LINE_SIZE 256
@@ -211,23 +212,27 @@
#define CPUB_68030 1
#define CPUB_68040 2
#define CPUB_68060 3
+#define CPUB_COLDFIRE 4
#define CPU_68020 (1<<CPUB_68020)
#define CPU_68030 (1<<CPUB_68030)
#define CPU_68040 (1<<CPUB_68040)
#define CPU_68060 (1<<CPUB_68060)
+#define CPU_COLDFIRE (1<<CPUB_COLDFIRE)
#define FPUB_68881 0
#define FPUB_68882 1
#define FPUB_68040 2 /* Internal FPU */
#define FPUB_68060 3 /* Internal FPU */
#define FPUB_SUNFPA 4 /* Sun-3 FPA */
+#define FPUB_COLDFIRE 5 /* ColdFire FPU */
#define FPU_68881 (1<<FPUB_68881)
#define FPU_68882 (1<<FPUB_68882)
#define FPU_68040 (1<<FPUB_68040)
#define FPU_68060 (1<<FPUB_68060)
#define FPU_SUNFPA (1<<FPUB_SUNFPA)
+#define FPU_COLDFIRE (1<<FPUB_COLDFIRE)
#define MMUB_68851 0
#define MMUB_68030 1 /* Internal MMU */
@@ -235,6 +240,7 @@
#define MMUB_68060 3 /* Internal MMU */
#define MMUB_APOLLO 4 /* Custom Apollo */
#define MMUB_SUN3 5 /* Custom Sun-3 */
+#define MMUB_COLDFIRE 6 /* Internal MMU */
#define MMU_68851 (1<<MMUB_68851)
#define MMU_68030 (1<<MMUB_68030)
@@ -242,6 +248,7 @@
#define MMU_68060 (1<<MMUB_68060)
#define MMU_SUN3 (1<<MMUB_SUN3)
#define MMU_APOLLO (1<<MMUB_APOLLO)
+#define MMU_COLDFIRE (1<<MMUB_COLDFIRE)
#ifdef __KERNEL__
@@ -341,6 +348,13 @@
# endif
#endif
+#if !defined(CONFIG_COLDFIRE)
+# define CPU_IS_COLDFIRE (0)
+#else
+# define CPU_IS_COLDFIRE (1)
+# define MMU_IS_COLDFIRE (1)
+#endif
+
#define CPU_TYPE (m68k_cputype)
#ifdef CONFIG_M68KFPU_EMU
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
index a29dd74..523db2a 100644
--- a/arch/m68k/include/asm/sigcontext.h
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -15,11 +15,7 @@
unsigned long sc_pc;
unsigned short sc_formatvec;
#ifndef __uClinux__
-# ifdef __mcoldfire__
- unsigned long sc_fpregs[2][2]; /* room for two fp registers */
-# else
unsigned long sc_fpregs[2*3]; /* room for two fp registers */
-# endif
unsigned long sc_fpcntl[3];
unsigned char sc_fpstate[216];
#endif
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index 9bf49c8..d4708ce 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -62,4 +62,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
index 7909889..e8665e6 100644
--- a/arch/m68k/include/asm/thread_info.h
+++ b/arch/m68k/include/asm/thread_info.h
@@ -3,6 +3,7 @@
#include <asm/types.h>
#include <asm/page.h>
+#include <asm/segment.h>
/*
* On machines with 4k pages we default to an 8k thread size, though we
@@ -26,6 +27,7 @@
struct task_struct *task; /* main task structure */
unsigned long flags;
struct exec_domain *exec_domain; /* execution domain */
+ mm_segment_t addr_limit; /* thread address space */
int preempt_count; /* 0 => preemptable, <0 => BUG */
__u32 cpu; /* should always be 0 on m68k */
unsigned long tp_value; /* thread pointer */
@@ -39,6 +41,7 @@
{ \
.task = &tsk, \
.exec_domain = &default_exec_domain, \
+ .addr_limit = KERNEL_DS, \
.preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
@@ -47,34 +50,6 @@
#define init_stack (init_thread_union.stack)
-#ifdef CONFIG_MMU
-
-#ifndef __ASSEMBLY__
-#include <asm/current.h>
-#endif
-
-#ifdef ASM_OFFSETS_C
-#define task_thread_info(tsk) ((struct thread_info *) NULL)
-#else
-#include <asm/asm-offsets.h>
-#define task_thread_info(tsk) ((struct thread_info *)((char *)tsk+TASK_TINFO))
-#endif
-
-#define init_thread_info (init_task.thread.info)
-#define task_stack_page(tsk) ((tsk)->stack)
-#define current_thread_info() task_thread_info(current)
-
-#define __HAVE_THREAD_FUNCTIONS
-
-#define setup_thread_stack(p, org) ({ \
- *(struct task_struct **)(p)->stack = (p); \
- task_thread_info(p)->task = (p); \
-})
-
-#define end_of_stack(p) ((unsigned long *)(p)->stack + 1)
-
-#else /* !CONFIG_MMU */
-
#ifndef __ASSEMBLY__
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
@@ -92,8 +67,6 @@
#define init_thread_info (init_thread_union.thread_info)
-#endif /* CONFIG_MMU */
-
/* entry.S relies on these definitions!
* bits 0-7 are tested at every exception exit
* bits 8-15 are also tested at syscall exit
@@ -103,7 +76,6 @@
#define TIF_DELAYED_TRACE 14 /* single step a syscall */
#define TIF_SYSCALL_TRACE 15 /* syscall trace active */
#define TIF_MEMDIE 16 /* is terminating due to OOM killer */
-#define TIF_FREEZE 17 /* thread is freezing for suspend */
#define TIF_RESTORE_SIGMASK 18 /* restore signal mask in do_signal */
#endif /* _ASM_M68K_THREAD_INFO_H */
diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h
index a6b4ed4..965ea35 100644
--- a/arch/m68k/include/asm/tlbflush.h
+++ b/arch/m68k/include/asm/tlbflush.h
@@ -5,10 +5,13 @@
#ifndef CONFIG_SUN3
#include <asm/current.h>
+#include <asm/mcfmmu.h>
static inline void flush_tlb_kernel_page(void *addr)
{
- if (CPU_IS_040_OR_060) {
+ if (CPU_IS_COLDFIRE) {
+ mmu_write(MMUOR, MMUOR_CNL);
+ } else if (CPU_IS_040_OR_060) {
mm_segment_t old_fs = get_fs();
set_fs(KERNEL_DS);
__asm__ __volatile__(".chip 68040\n\t"
@@ -25,12 +28,15 @@
*/
static inline void __flush_tlb(void)
{
- if (CPU_IS_040_OR_060)
+ if (CPU_IS_COLDFIRE) {
+ mmu_write(MMUOR, MMUOR_CNL);
+ } else if (CPU_IS_040_OR_060) {
__asm__ __volatile__(".chip 68040\n\t"
"pflushan\n\t"
".chip 68k");
- else if (CPU_IS_020_OR_030)
+ } else if (CPU_IS_020_OR_030) {
__asm__ __volatile__("pflush #0,#4");
+ }
}
static inline void __flush_tlb040_one(unsigned long addr)
@@ -43,7 +49,9 @@
static inline void __flush_tlb_one(unsigned long addr)
{
- if (CPU_IS_040_OR_060)
+ if (CPU_IS_COLDFIRE)
+ mmu_write(MMUOR, MMUOR_CNL);
+ else if (CPU_IS_040_OR_060)
__flush_tlb040_one(addr);
else if (CPU_IS_020_OR_030)
__asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr));
@@ -56,12 +64,15 @@
*/
static inline void flush_tlb_all(void)
{
- if (CPU_IS_040_OR_060)
+ if (CPU_IS_COLDFIRE) {
+ mmu_write(MMUOR, MMUOR_CNL);
+ } else if (CPU_IS_040_OR_060) {
__asm__ __volatile__(".chip 68040\n\t"
"pflusha\n\t"
".chip 68k");
- else if (CPU_IS_020_OR_030)
+ } else if (CPU_IS_020_OR_030) {
__asm__ __volatile__("pflusha");
+ }
}
static inline void flush_tlb_mm(struct mm_struct *mm)
diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h
index 151068f..4aff335 100644
--- a/arch/m68k/include/asm/traps.h
+++ b/arch/m68k/include/asm/traps.h
@@ -18,6 +18,7 @@
typedef void (*e_vector)(void);
extern e_vector vectors[];
+extern e_vector *_ramvec;
asmlinkage void auto_inthandler(void);
asmlinkage void user_inthandler(void);
diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h
index b17fd11..89705ad 100644
--- a/arch/m68k/include/asm/types.h
+++ b/arch/m68k/include/asm/types.h
@@ -10,12 +10,6 @@
*/
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h
index 7107f3fb..9c80cd5 100644
--- a/arch/m68k/include/asm/uaccess_mm.h
+++ b/arch/m68k/include/asm/uaccess_mm.h
@@ -21,6 +21,22 @@
}
/*
+ * Not all varients of the 68k family support the notion of address spaces.
+ * The traditional 680x0 parts do, and they use the sfc/dfc registers and
+ * the "moves" instruction to access user space from kernel space. Other
+ * family members like ColdFire don't support this, and only have a single
+ * address space, and use the usual "move" instruction for user space access.
+ *
+ * Outside of this difference the user space access functions are the same.
+ * So lets keep the code simple and just define in what we need to use.
+ */
+#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES
+#define MOVES "moves"
+#else
+#define MOVES "move"
+#endif
+
+/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
@@ -43,7 +59,7 @@
#define __put_user_asm(res, x, ptr, bwl, reg, err) \
asm volatile ("\n" \
- "1: moves."#bwl" %2,%1\n" \
+ "1: "MOVES"."#bwl" %2,%1\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .even\n" \
@@ -83,8 +99,8 @@
{ \
const void __user *__pu_ptr = (ptr); \
asm volatile ("\n" \
- "1: moves.l %2,(%1)+\n" \
- "2: moves.l %R2,(%1)\n" \
+ "1: "MOVES".l %2,(%1)+\n" \
+ "2: "MOVES".l %R2,(%1)\n" \
"3:\n" \
" .section .fixup,\"ax\"\n" \
" .even\n" \
@@ -115,12 +131,12 @@
#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \
type __gu_val; \
asm volatile ("\n" \
- "1: moves."#bwl" %2,%1\n" \
+ "1: "MOVES"."#bwl" %2,%1\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .even\n" \
"10: move.l %3,%0\n" \
- " sub."#bwl" %1,%1\n" \
+ " sub.l %1,%1\n" \
" jra 2b\n" \
" .previous\n" \
"\n" \
@@ -152,8 +168,8 @@
const void *__gu_ptr = (ptr); \
u64 __gu_val; \
asm volatile ("\n" \
- "1: moves.l (%2)+,%1\n" \
- "2: moves.l (%2),%R1\n" \
+ "1: "MOVES".l (%2)+,%1\n" \
+ "2: "MOVES".l (%2),%R1\n" \
"3:\n" \
" .section .fixup,\"ax\"\n" \
" .even\n" \
@@ -188,12 +204,12 @@
#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
asm volatile ("\n" \
- "1: moves."#s1" (%2)+,%3\n" \
+ "1: "MOVES"."#s1" (%2)+,%3\n" \
" move."#s1" %3,(%1)+\n" \
- "2: moves."#s2" (%2)+,%3\n" \
+ "2: "MOVES"."#s2" (%2)+,%3\n" \
" move."#s2" %3,(%1)+\n" \
" .ifnc \""#s3"\",\"\"\n" \
- "3: moves."#s3" (%2)+,%3\n" \
+ "3: "MOVES"."#s3" (%2)+,%3\n" \
" move."#s3" %3,(%1)+\n" \
" .endif\n" \
"4:\n" \
@@ -269,13 +285,13 @@
#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \
asm volatile ("\n" \
" move."#s1" (%2)+,%3\n" \
- "11: moves."#s1" %3,(%1)+\n" \
+ "11: "MOVES"."#s1" %3,(%1)+\n" \
"12: move."#s2" (%2)+,%3\n" \
- "21: moves."#s2" %3,(%1)+\n" \
+ "21: "MOVES"."#s2" %3,(%1)+\n" \
"22:\n" \
" .ifnc \""#s3"\",\"\"\n" \
" move."#s3" (%2)+,%3\n" \
- "31: moves."#s3" %3,(%1)+\n" \
+ "31: "MOVES"."#s3" %3,(%1)+\n" \
"32:\n" \
" .endif\n" \
"4:\n" \
diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h
index 00dcc51..e4e2266 100644
--- a/arch/m68k/include/asm/ucontext.h
+++ b/arch/m68k/include/asm/ucontext.h
@@ -7,11 +7,7 @@
typedef struct fpregset {
int f_fpcntl[3];
-#ifdef __mcoldfire__
- int f_fpregs[8][2];
-#else
int f_fpregs[8*3];
-#endif
} fpregset_t;
struct mcontext {
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 43f984e..ea0b502 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -132,10 +132,10 @@
#define __NR_adjtimex 124
#define __NR_mprotect 125
#define __NR_sigprocmask 126
-/*#define __NR_create_module 127*/
+#define __NR_create_module 127
#define __NR_init_module 128
#define __NR_delete_module 129
-/*#define __NR_get_kernel_syms 130*/
+#define __NR_get_kernel_syms 130
#define __NR_quotactl 131
#define __NR_getpgid 132
#define __NR_fchdir 133
@@ -172,7 +172,7 @@
#define __NR_setresuid 164
#define __NR_getresuid 165
#define __NR_getpagesize 166
-/*#define __NR_query_module 167*/
+#define __NR_query_module 167
#define __NR_poll 168
#define __NR_nfsservctl 169
#define __NR_setresgid 170
@@ -193,8 +193,8 @@
#define __NR_capset 185
#define __NR_sigaltstack 186
#define __NR_sendfile 187
-/*#define __NR_getpmsg 188*/ /* some people actually want streams */
-/*#define __NR_putpmsg 189*/ /* some people actually want streams */
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
#define __NR_vfork 190
#define __NR_ugetrlimit 191
#define __NR_mmap2 192
@@ -350,10 +350,12 @@
#define __NR_clock_adjtime 342
#define __NR_syncfs 343
#define __NR_setns 344
+#define __NR_process_vm_readv 345
+#define __NR_process_vm_writev 346
#ifdef __KERNEL__
-#define NR_syscalls 345
+#define NR_syscalls 347
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index c569619..40d29a78 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -2,19 +2,24 @@
# Makefile for the linux kernel.
#
-extra-$(CONFIG_MMU) := head.o
+extra-$(CONFIG_AMIGA) := head.o
+extra-$(CONFIG_ATARI) := head.o
+extra-$(CONFIG_MAC) := head.o
+extra-$(CONFIG_APOLLO) := head.o
+extra-$(CONFIG_VME) := head.o
+extra-$(CONFIG_HP300) := head.o
+extra-$(CONFIG_Q40) := head.o
+extra-$(CONFIG_SUN3X) := head.o
extra-$(CONFIG_SUN3) := sun3-head.o
extra-y += vmlinux.lds
-obj-y := entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \
- signal.o sys_m68k.o syscalltable.o time.o traps.o
+obj-y := entry.o init_task.o irq.o m68k_ksyms.o module.o process.o ptrace.o
+obj-y += setup.o signal.o sys_m68k.o syscalltable.o time.o traps.o
-obj-$(CONFIG_MMU) += ints.o vectors.o
+obj-$(CONFIG_MMU_MOTOROLA) += ints.o vectors.o
+obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o
ifndef CONFIG_MMU_SUN3
-obj-y += dma.o
-endif
-ifndef CONFIG_MMU
-obj-y += init_task.o
+obj-y += dma.o
endif
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 983fed9..a972b00 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -24,8 +24,7 @@
/* offsets into the task struct */
DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
- DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
- DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info));
+ DEFINE(TASK_STACK, offsetof(struct task_struct, stack));
/* offsets into the thread struct */
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 081cf96..b8daf64 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -1,4 +1,4 @@
-#ifdef CONFIG_MMU
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
#include "entry_mm.S"
#else
#include "entry_no.S"
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
index c713f51..675a854 100644
--- a/arch/m68k/kernel/entry_mm.S
+++ b/arch/m68k/kernel/entry_mm.S
@@ -99,7 +99,8 @@
jra .Lret_from_exception
ENTRY(ret_from_signal)
- tstb %curptr@(TASK_INFO+TINFO_FLAGS+2)
+ movel %curptr@(TASK_STACK),%a1
+ tstb %a1@(TINFO_FLAGS+2)
jge 1f
jbsr syscall_trace
1: RESTORE_SWITCH_STACK
@@ -120,11 +121,13 @@
SAVE_ALL_SYS
GET_CURRENT(%d1)
+ movel %d1,%a1
+
| save top of frame
movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
| syscall trace?
- tstb %curptr@(TASK_INFO+TINFO_FLAGS+2)
+ tstb %a1@(TINFO_FLAGS+2)
jmi do_trace_entry
cmpl #NR_syscalls,%d0
jcc badsys
@@ -133,7 +136,8 @@
movel %d0,%sp@(PT_OFF_D0) | save the return value
ret_from_syscall:
|oriw #0x0700,%sr
- movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
+ movel %curptr@(TASK_STACK),%a1
+ movew %a1@(TINFO_FLAGS+2),%d0
jne syscall_exit_work
1: RESTORE_ALL
@@ -159,7 +163,8 @@
andw #ALLOWINT,%sr
resume_userspace:
- moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0
+ movel %curptr@(TASK_STACK),%a1
+ moveb %a1@(TINFO_FLAGS+3),%d0
jne exit_work
1: RESTORE_ALL
@@ -199,7 +204,8 @@
ENTRY(auto_inthandler)
SAVE_ALL_INT
GET_CURRENT(%d0)
- addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
| put exception # in d0
bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
subw #VEC_SPUR,%d0
@@ -211,7 +217,8 @@
addql #8,%sp | pop parameters off stack
ret_from_interrupt:
- subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
jeq ret_from_last_interrupt
2: RESTORE_ALL
@@ -232,7 +239,8 @@
ENTRY(user_inthandler)
SAVE_ALL_INT
GET_CURRENT(%d0)
- addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
| put exception # in d0
bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
user_irqvec_fixup = . + 2
@@ -243,7 +251,8 @@
jsr do_IRQ | process the IRQ
addql #8,%sp | pop parameters off stack
- subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
jeq ret_from_last_interrupt
RESTORE_ALL
@@ -252,13 +261,15 @@
ENTRY(bad_inthandler)
SAVE_ALL_INT
GET_CURRENT(%d0)
- addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
movel %sp,%sp@-
jsr handle_badint
addql #4,%sp
- subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
jeq ret_from_last_interrupt
RESTORE_ALL
diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S
index 1b42890..d80cba4 100644
--- a/arch/m68k/kernel/entry_no.S
+++ b/arch/m68k/kernel/entry_no.S
@@ -44,8 +44,7 @@
ENTRY(buserr)
SAVE_ALL_INT
- moveq #-1,%d0
- movel %d0,%sp@(PT_OFF_ORIG_D0)
+ GET_CURRENT(%d0)
movel %sp,%sp@- /* stack frame pointer argument */
jsr buserr_c
addql #4,%sp
@@ -53,8 +52,7 @@
ENTRY(trap)
SAVE_ALL_INT
- moveq #-1,%d0
- movel %d0,%sp@(PT_OFF_ORIG_D0)
+ GET_CURRENT(%d0)
movel %sp,%sp@- /* stack frame pointer argument */
jsr trap_c
addql #4,%sp
@@ -65,8 +63,7 @@
.globl dbginterrupt
ENTRY(dbginterrupt)
SAVE_ALL_INT
- moveq #-1,%d0
- movel %d0,%sp@(PT_OFF_ORIG_D0)
+ GET_CURRENT(%d0)
movel %sp,%sp@- /* stack frame pointer argument */
jsr dbginterrupt_c
addql #4,%sp
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 27622b3..d197e7f 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -250,9 +250,8 @@
* USE_MFP: Use the ST-MFP port (Modem1) for serial debug.
*
* Macintosh constants:
- * MAC_SERIAL_DEBUG: Turns on serial debug output for the Macintosh.
- * MAC_USE_SCC_A: Use the SCC port A (modem) for serial debug.
- * MAC_USE_SCC_B: Use the SCC port B (printer) for serial debug (default).
+ * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console.
+ * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console.
*/
#include <linux/linkage.h>
@@ -268,33 +267,25 @@
#include <asm/machw.h>
-/*
- * Macintosh console support
- */
-
#ifdef CONFIG_FRAMEBUFFER_CONSOLE
#define CONSOLE
#define CONSOLE_PENGUIN
#endif
-/*
- * Macintosh serial debug support; outputs boot info to the printer
- * and/or modem serial ports
- */
-#undef MAC_SERIAL_DEBUG
+#ifdef CONFIG_EARLY_PRINTK
+#define SERIAL_DEBUG
+#else
+#undef SERIAL_DEBUG
+#endif
-/*
- * Macintosh serial debug port selection; define one or both;
- * requires MAC_SERIAL_DEBUG to be defined
- */
-#define MAC_USE_SCC_A /* Macintosh modem serial port */
-#define MAC_USE_SCC_B /* Macintosh printer serial port */
+#else /* !CONFIG_MAC */
-#endif /* CONFIG_MAC */
+#define SERIAL_DEBUG
+
+#endif /* !CONFIG_MAC */
#undef MMU_PRINT
#undef MMU_NOCACHE_KERNEL
-#define SERIAL_DEBUG
#undef DEBUG
/*
@@ -655,11 +646,11 @@
lea %pc@(L(mac_rowbytes)),%a1
movel %a0@,%a1@
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
get_bi_record BI_MAC_SCCBASE
lea %pc@(L(mac_sccbase)),%a1
movel %a0@,%a1@
-#endif /* MAC_SERIAL_DEBUG */
+#endif
#if 0
/*
@@ -1427,7 +1418,7 @@
subl %d0,L(console_font)
subl %d0,L(console_font_data)
#endif
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
orl #0x50000000,L(mac_sccbase)
#endif
1:
@@ -1917,7 +1908,7 @@
jbne 30b
mmu_print_done:
- puts "\n\n"
+ puts "\n"
func_return mmu_print
@@ -2768,7 +2759,7 @@
.byte 9,0 /* no interrupts */
.byte 10,0 /* NRZ */
.byte 11,0x50 /* use baud rate generator */
- .byte 12,10,13,0 /* 9600 baud */
+ .byte 12,1,13,0 /* 38400 baud */
.byte 14,1 /* Baud rate generator enable */
.byte 3,0xc1 /* enable receiver */
.byte 5,0xea /* enable transmitter */
@@ -2906,10 +2897,12 @@
#endif
#ifdef CONFIG_MAC
is_not_mac(L(serial_init_not_mac))
-#ifdef MAC_SERIAL_DEBUG
-#if !defined(MAC_USE_SCC_A) && !defined(MAC_USE_SCC_B)
-#define MAC_USE_SCC_B
-#endif
+
+#ifdef SERIAL_DEBUG
+/* You may define either or both of these. */
+#define MAC_USE_SCC_A /* Modem port */
+#define MAC_USE_SCC_B /* Printer port */
+
#define mac_scc_cha_b_ctrl_offset 0x0
#define mac_scc_cha_a_ctrl_offset 0x2
#define mac_scc_cha_b_data_offset 0x4
@@ -2940,7 +2933,7 @@
jra 7b
8:
#endif /* MAC_USE_SCC_B */
-#endif /* MAC_SERIAL_DEBUG */
+#endif /* SERIAL_DEBUG */
jra L(serial_init_done)
L(serial_init_not_mac):
@@ -3011,7 +3004,7 @@
#ifdef CONFIG_MAC
is_not_mac(5f)
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
#ifdef MAC_USE_SCC_A
movel %pc@(L(mac_sccbase)),%a1
@@ -3029,7 +3022,7 @@
moveb %d0,%a1@(mac_scc_cha_b_data_offset)
#endif /* MAC_USE_SCC_B */
-#endif /* MAC_SERIAL_DEBUG */
+#endif /* SERIAL_DEBUG */
jra L(serial_putc_done)
5:
@@ -3248,33 +3241,39 @@
#ifdef CONFIG_MAC
/*
- * mac_serial_print
+ * mac_early_print
*
* This routine takes its parameters on the stack. It then
- * turns around and calls the internal routine. This routine
- * is used until the Linux console driver initializes itself.
+ * turns around and calls the internal routines. This routine
+ * is used by the boot console.
*
* The calling parameters are:
- * void mac_serial_print(const char *str);
+ * void mac_early_print(const char *str, unsigned length);
*
* This routine does NOT understand variable arguments only
* simple strings!
*/
-ENTRY(mac_serial_print)
- moveml %d0/%a0,%sp@-
-#if 1
- move %sr,%sp@-
+ENTRY(mac_early_print)
+ moveml %d0/%d1/%a0,%sp@-
+ movew %sr,%sp@-
ori #0x0700,%sr
-#endif
- movel %sp@(10),%a0 /* fetch parameter */
+ movel %sp@(18),%a0 /* fetch parameter */
+ movel %sp@(22),%d1 /* fetch parameter */
jra 2f
-1: serial_putc %d0
-2: moveb %a0@+,%d0
- jne 1b
-#if 1
- move %sp@+,%sr
+1:
+#ifdef CONSOLE
+ console_putc %d0
#endif
- moveml %sp@+,%d0/%a0
+#ifdef SERIAL_DEBUG
+ serial_putc %d0
+#endif
+ subq #1,%d1
+2: jeq 3f
+ moveb %a0@+,%d0
+ jne 1b
+3:
+ movew %sp@+,%sr
+ moveml %sp@+,%d0/%d1/%a0
rts
#endif /* CONFIG_MAC */
@@ -3409,10 +3408,10 @@
* a0 = pointer to boot_info
* d7 = value of boot_info fields
*/
- puts "\nMacLinux\n\n"
+ puts "\nMacLinux\n"
#ifdef SERIAL_DEBUG
- puts " vidaddr:"
+ puts "\n vidaddr:"
putn %pc@(L(mac_videobase)) /* video addr. */
puts "\n _stext:"
@@ -3423,19 +3422,21 @@
lea %pc@(_end),%a0
putn %a0
- puts "\ncpuid:"
+ puts "\n cpuid:"
putn %pc@(L(cputype))
- putc '\n'
-#ifdef MAC_SERIAL_DEBUG
+# ifdef CONFIG_MAC
+ puts "\n sccbase:"
putn %pc@(L(mac_sccbase))
+# endif
+# ifdef MMU_PRINT
putc '\n'
-#endif
-# if defined(MMU_PRINT)
jbsr mmu_print_machine_cpu_types
-# endif /* MMU_PRINT */
+# endif
#endif /* SERIAL_DEBUG */
+ putc '\n'
+
func_return console_put_stats
#ifdef CONSOLE_PENGUIN
@@ -3896,11 +3897,11 @@
.long 0
L(mac_rowbytes):
.long 0
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
L(mac_sccbase):
.long 0
-#endif /* MAC_SERIAL_DEBUG */
#endif
+#endif /* CONFIG_MAC */
#if defined (CONFIG_APOLLO)
LSRB0 = 0x10412
diff --git a/arch/m68k/kernel/init_task.c b/arch/m68k/kernel/init_task.c
index cbf9dc3..c744cfc 100644
--- a/arch/m68k/kernel/init_task.c
+++ b/arch/m68k/kernel/init_task.c
@@ -19,7 +19,6 @@
*
* All other task structs will be allocated on slabs in fork.c
*/
-__asm__(".align 4");
struct task_struct init_task = INIT_TASK(init_task);
EXPORT_SYMBOL(init_task);
@@ -27,7 +26,7 @@
/*
* Initial thread structure.
*
- * We need to make sure that this is 8192-byte aligned due to the
+ * We need to make sure that this is THREAD size aligned due to the
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c
index 1b7a14d..774c1bd 100644
--- a/arch/m68k/kernel/m68k_ksyms.c
+++ b/arch/m68k/kernel/m68k_ksyms.c
@@ -14,7 +14,7 @@
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+#if defined(CONFIG_CPU_HAS_NO_MULDIV64)
/*
* Simpler 68k and ColdFire parts also need a few other gcc functions.
*/
diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c
index 1bc223a..125f34e0 100644
--- a/arch/m68k/kernel/process_mm.c
+++ b/arch/m68k/kernel/process_mm.c
@@ -33,22 +33,6 @@
#include <asm/setup.h>
#include <asm/pgtable.h>
-/*
- * Initial task/thread structure. Make this a per-architecture thing,
- * because different architectures tend to have different
- * alignment requirements and potentially different initial
- * setup.
- */
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union __init_task_data
- __attribute__((aligned(THREAD_SIZE))) =
- { INIT_THREAD_INFO(init_task) };
-
-/* initial task structure */
-struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_task);
asmlinkage void ret_from_fork(void);
@@ -188,9 +172,7 @@
current->thread.fs = __USER_DS;
if (!FPU_IS_EMU)
- asm volatile (".chip 68k/68881\n\t"
- "frestore %0@\n\t"
- ".chip 68k" : : "a" (&zero));
+ asm volatile ("frestore %0@" : : "a" (&zero) : "memory");
}
/*
@@ -264,11 +246,28 @@
/* Copy the current fpu state */
asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
- if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2])
- asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
- "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
- : : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
- : "memory");
+ if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
+ if (CPU_IS_COLDFIRE) {
+ asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
+ "fmovel %/fpiar,%1\n\t"
+ "fmovel %/fpcr,%2\n\t"
+ "fmovel %/fpsr,%3"
+ :
+ : "m" (p->thread.fp[0]),
+ "m" (p->thread.fpcntl[0]),
+ "m" (p->thread.fpcntl[1]),
+ "m" (p->thread.fpcntl[2])
+ : "memory");
+ } else {
+ asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
+ "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
+ :
+ : "m" (p->thread.fp[0]),
+ "m" (p->thread.fpcntl[0])
+ : "memory");
+ }
+ }
+
/* Restore the state in case the fpu was busy */
asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
}
@@ -301,12 +300,28 @@
if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
return 0;
- asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
- :: "m" (fpu->fpcntl[0])
- : "memory");
- asm volatile ("fmovemx %/fp0-%/fp7,%0"
- :: "m" (fpu->fpregs[0])
- : "memory");
+ if (CPU_IS_COLDFIRE) {
+ asm volatile ("fmovel %/fpiar,%0\n\t"
+ "fmovel %/fpcr,%1\n\t"
+ "fmovel %/fpsr,%2\n\t"
+ "fmovemd %/fp0-%/fp7,%3"
+ :
+ : "m" (fpu->fpcntl[0]),
+ "m" (fpu->fpcntl[1]),
+ "m" (fpu->fpcntl[2]),
+ "m" (fpu->fpregs[0])
+ : "memory");
+ } else {
+ asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
+ :
+ : "m" (fpu->fpcntl[0])
+ : "memory");
+ asm volatile ("fmovemx %/fp0-%/fp7,%0"
+ :
+ : "m" (fpu->fpregs[0])
+ : "memory");
+ }
+
return 1;
}
EXPORT_SYMBOL(dump_fpu);
diff --git a/arch/m68k/kernel/ptrace_mm.c b/arch/m68k/kernel/ptrace_mm.c
index 0b25268..7bc999b 100644
--- a/arch/m68k/kernel/ptrace_mm.c
+++ b/arch/m68k/kernel/ptrace_mm.c
@@ -18,6 +18,7 @@
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
+#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
@@ -275,3 +276,20 @@
current->exit_code = 0;
}
}
+
+#ifdef CONFIG_COLDFIRE
+asmlinkage int syscall_trace_enter(void)
+{
+ int ret = 0;
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE))
+ ret = tracehook_report_syscall_entry(task_pt_regs(current));
+ return ret;
+}
+
+asmlinkage void syscall_trace_leave(void)
+{
+ if (test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(task_pt_regs(current), 0);
+}
+#endif /* CONFIG_COLDFIRE */
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index c3b4506..d872ce4 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -221,7 +221,8 @@
#endif
/* The bootinfo is located right after the kernel bss */
- m68k_parse_bootinfo((const struct bi_record *)_end);
+ if (!CPU_IS_COLDFIRE)
+ m68k_parse_bootinfo((const struct bi_record *)_end);
if (CPU_IS_040)
m68k_is040or060 = 4;
@@ -235,7 +236,7 @@
* with them, we should add a test to check_bugs() below] */
#ifndef CONFIG_M68KFPU_EMU_ONLY
/* clear the fpu if we have one */
- if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
+ if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|FPU_COLDFIRE)) {
volatile int zero = 0;
asm volatile ("frestore %0" : : "m" (zero));
}
@@ -258,6 +259,10 @@
init_mm.end_data = (unsigned long)_edata;
init_mm.brk = (unsigned long)_end;
+#if defined(CONFIG_BOOTPARAM)
+ strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE);
+ m68k_command_line[CL_SIZE - 1] = 0;
+#endif /* CONFIG_BOOTPARAM */
*cmdline_p = m68k_command_line;
memcpy(boot_command_line, *cmdline_p, CL_SIZE);
@@ -323,6 +328,11 @@
config_sun3x();
break;
#endif
+#ifdef CONFIG_COLDFIRE
+ case MACH_M54XX:
+ config_BSP(NULL, 0);
+ break;
+#endif
default:
panic("No configuration setup");
}
@@ -384,6 +394,7 @@
#define LOOP_CYCLES_68030 (8)
#define LOOP_CYCLES_68040 (3)
#define LOOP_CYCLES_68060 (1)
+#define LOOP_CYCLES_COLDFIRE (2)
if (CPU_IS_020) {
cpu = "68020";
@@ -397,6 +408,9 @@
} else if (CPU_IS_060) {
cpu = "68060";
clockfactor = LOOP_CYCLES_68060;
+ } else if (CPU_IS_COLDFIRE) {
+ cpu = "ColdFire";
+ clockfactor = LOOP_CYCLES_COLDFIRE;
} else {
cpu = "680x0";
clockfactor = 0;
@@ -415,6 +429,8 @@
fpu = "68060";
else if (m68k_fputype & FPU_SUNFPA)
fpu = "Sun FPA";
+ else if (m68k_fputype & FPU_COLDFIRE)
+ fpu = "ColdFire";
else
fpu = "none";
#endif
@@ -431,6 +447,8 @@
mmu = "Sun-3";
else if (m68k_mmutype & MMU_APOLLO)
mmu = "Apollo";
+ else if (m68k_mmutype & MMU_COLDFIRE)
+ mmu = "ColdFire";
else
mmu = "unknown";
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 2ed8c0f..ca3df0d 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -47,7 +47,6 @@
char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */
-void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
int (*mach_set_clock_mmss)(unsigned long);
/* machine dependent reboot functions */
diff --git a/arch/m68k/kernel/signal_mm.c b/arch/m68k/kernel/signal_mm.c
index a0afc23..cb856f9 100644
--- a/arch/m68k/kernel/signal_mm.c
+++ b/arch/m68k/kernel/signal_mm.c
@@ -56,7 +56,11 @@
[1] = -1, /* sizeof(((struct frame *)0)->un.fmt1), */
[2] = sizeof(((struct frame *)0)->un.fmt2),
[3] = sizeof(((struct frame *)0)->un.fmt3),
+#ifdef CONFIG_COLDFIRE
+ [4] = 0,
+#else
[4] = sizeof(((struct frame *)0)->un.fmt4),
+#endif
[5] = -1, /* sizeof(((struct frame *)0)->un.fmt5), */
[6] = -1, /* sizeof(((struct frame *)0)->un.fmt6), */
[7] = sizeof(((struct frame *)0)->un.fmt7),
@@ -84,7 +88,11 @@
regs->stkadj = frame_extra_sizes[regs->format];
tregs = (struct pt_regs *)((long)regs + regs->stkadj);
tregs->vector = regs->vector;
+#ifdef CONFIG_COLDFIRE
+ tregs->format = 4;
+#else
tregs->format = 0;
+#endif
tregs->pc = fixup->fixup;
tregs->sr = regs->sr;
@@ -195,7 +203,8 @@
if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
/* Verify the frame format. */
- if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version))
+ if (!(CPU_IS_060 || CPU_IS_COLDFIRE) &&
+ (sc->sc_fpstate[0] != fpu_version))
goto out;
if (CPU_IS_020_OR_030) {
if (m68k_fputype & FPU_68881 &&
@@ -214,19 +223,43 @@
sc->sc_fpstate[3] == 0x60 ||
sc->sc_fpstate[3] == 0xe0))
goto out;
+ } else if (CPU_IS_COLDFIRE) {
+ if (!(sc->sc_fpstate[0] == 0x00 ||
+ sc->sc_fpstate[0] == 0x05 ||
+ sc->sc_fpstate[0] == 0xe5))
+ goto out;
} else
goto out;
- __asm__ volatile (".chip 68k/68881\n\t"
- "fmovemx %0,%%fp0-%%fp1\n\t"
- "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
- ".chip 68k"
- : /* no outputs */
- : "m" (*sc->sc_fpregs), "m" (*sc->sc_fpcntl));
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fmovemd %0,%%fp0-%%fp1\n\t"
+ "fmovel %1,%%fpcr\n\t"
+ "fmovel %2,%%fpsr\n\t"
+ "fmovel %3,%%fpiar"
+ : /* no outputs */
+ : "m" (sc->sc_fpregs[0]),
+ "m" (sc->sc_fpcntl[0]),
+ "m" (sc->sc_fpcntl[1]),
+ "m" (sc->sc_fpcntl[2]));
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fmovemx %0,%%fp0-%%fp1\n\t"
+ "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
+ ".chip 68k"
+ : /* no outputs */
+ : "m" (*sc->sc_fpregs),
+ "m" (*sc->sc_fpcntl));
+ }
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "frestore %0\n\t"
- ".chip 68k" : : "m" (*sc->sc_fpstate));
+
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("frestore %0" : : "m" (*sc->sc_fpstate));
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "frestore %0\n\t"
+ ".chip 68k"
+ : : "m" (*sc->sc_fpstate));
+ }
err = 0;
out:
@@ -241,7 +274,7 @@
static inline int rt_restore_fpu_state(struct ucontext __user *uc)
{
unsigned char fpstate[FPCONTEXT_SIZE];
- int context_size = CPU_IS_060 ? 8 : 0;
+ int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0);
fpregset_t fpregs;
int err = 1;
@@ -260,10 +293,11 @@
if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate))
goto out;
if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
- if (!CPU_IS_060)
+ if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
context_size = fpstate[1];
/* Verify the frame format. */
- if (!CPU_IS_060 && (fpstate[0] != fpu_version))
+ if (!(CPU_IS_060 || CPU_IS_COLDFIRE) &&
+ (fpstate[0] != fpu_version))
goto out;
if (CPU_IS_020_OR_030) {
if (m68k_fputype & FPU_68881 &&
@@ -282,26 +316,50 @@
fpstate[3] == 0x60 ||
fpstate[3] == 0xe0))
goto out;
+ } else if (CPU_IS_COLDFIRE) {
+ if (!(fpstate[3] == 0x00 ||
+ fpstate[3] == 0x05 ||
+ fpstate[3] == 0xe5))
+ goto out;
} else
goto out;
if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs,
sizeof(fpregs)))
goto out;
- __asm__ volatile (".chip 68k/68881\n\t"
- "fmovemx %0,%%fp0-%%fp7\n\t"
- "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
- ".chip 68k"
- : /* no outputs */
- : "m" (*fpregs.f_fpregs),
- "m" (*fpregs.f_fpcntl));
+
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fmovemd %0,%%fp0-%%fp7\n\t"
+ "fmovel %1,%%fpcr\n\t"
+ "fmovel %2,%%fpsr\n\t"
+ "fmovel %3,%%fpiar"
+ : /* no outputs */
+ : "m" (fpregs.f_fpregs[0]),
+ "m" (fpregs.f_fpcntl[0]),
+ "m" (fpregs.f_fpcntl[1]),
+ "m" (fpregs.f_fpcntl[2]));
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fmovemx %0,%%fp0-%%fp7\n\t"
+ "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
+ ".chip 68k"
+ : /* no outputs */
+ : "m" (*fpregs.f_fpregs),
+ "m" (*fpregs.f_fpcntl));
+ }
}
if (context_size &&
__copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1,
context_size))
goto out;
- __asm__ volatile (".chip 68k/68881\n\t"
- "frestore %0\n\t"
- ".chip 68k" : : "m" (*fpstate));
+
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("frestore %0" : : "m" (*fpstate));
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "frestore %0\n\t"
+ ".chip 68k"
+ : : "m" (*fpstate));
+ }
err = 0;
out:
@@ -336,8 +394,12 @@
regs->format = formatvec >> 12;
regs->vector = formatvec & 0xfff;
#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
- __asm__ __volatile__
- (" movel %0,%/a0\n\t"
+ __asm__ __volatile__ (
+#ifdef CONFIG_COLDFIRE
+ " movel %0,%/sp\n\t"
+ " bra ret_from_signal\n"
+#else
+ " movel %0,%/a0\n\t"
" subl %1,%/a0\n\t" /* make room on stack */
" movel %/a0,%/sp\n\t" /* set stack pointer */
/* move switch_stack and pt_regs */
@@ -350,6 +412,7 @@
"2: movel %4@+,%/a0@+\n\t"
" dbra %1,2b\n\t"
" bral ret_from_signal\n"
+#endif
: /* no outputs, it doesn't ever return */
: "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
"n" (frame_offset), "a" (buf + fsize/4)
@@ -516,10 +579,15 @@
return;
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "fsave %0\n\t"
- ".chip 68k"
- : : "m" (*sc->sc_fpstate) : "memory");
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fsave %0"
+ : : "m" (*sc->sc_fpstate) : "memory");
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fsave %0\n\t"
+ ".chip 68k"
+ : : "m" (*sc->sc_fpstate) : "memory");
+ }
if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
fpu_version = sc->sc_fpstate[0];
@@ -530,21 +598,35 @@
if (*(unsigned short *) sc->sc_fpstate == 0x1f38)
sc->sc_fpstate[0x38] |= 1 << 3;
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "fmovemx %%fp0-%%fp1,%0\n\t"
- "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
- ".chip 68k"
- : "=m" (*sc->sc_fpregs),
- "=m" (*sc->sc_fpcntl)
- : /* no inputs */
- : "memory");
+
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fmovemd %%fp0-%%fp1,%0\n\t"
+ "fmovel %%fpcr,%1\n\t"
+ "fmovel %%fpsr,%2\n\t"
+ "fmovel %%fpiar,%3"
+ : "=m" (sc->sc_fpregs[0]),
+ "=m" (sc->sc_fpcntl[0]),
+ "=m" (sc->sc_fpcntl[1]),
+ "=m" (sc->sc_fpcntl[2])
+ : /* no inputs */
+ : "memory");
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fmovemx %%fp0-%%fp1,%0\n\t"
+ "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
+ ".chip 68k"
+ : "=m" (*sc->sc_fpregs),
+ "=m" (*sc->sc_fpcntl)
+ : /* no inputs */
+ : "memory");
+ }
}
}
static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *regs)
{
unsigned char fpstate[FPCONTEXT_SIZE];
- int context_size = CPU_IS_060 ? 8 : 0;
+ int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0);
int err = 0;
if (FPU_IS_EMU) {
@@ -557,15 +639,19 @@
return err;
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "fsave %0\n\t"
- ".chip 68k"
- : : "m" (*fpstate) : "memory");
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fsave %0" : : "m" (*fpstate) : "memory");
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fsave %0\n\t"
+ ".chip 68k"
+ : : "m" (*fpstate) : "memory");
+ }
err |= __put_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate);
if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
fpregset_t fpregs;
- if (!CPU_IS_060)
+ if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
context_size = fpstate[1];
fpu_version = fpstate[0];
if (CPU_IS_020_OR_030 &&
@@ -575,14 +661,27 @@
if (*(unsigned short *) fpstate == 0x1f38)
fpstate[0x38] |= 1 << 3;
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "fmovemx %%fp0-%%fp7,%0\n\t"
- "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
- ".chip 68k"
- : "=m" (*fpregs.f_fpregs),
- "=m" (*fpregs.f_fpcntl)
- : /* no inputs */
- : "memory");
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fmovemd %%fp0-%%fp7,%0\n\t"
+ "fmovel %%fpcr,%1\n\t"
+ "fmovel %%fpsr,%2\n\t"
+ "fmovel %%fpiar,%3"
+ : "=m" (fpregs.f_fpregs[0]),
+ "=m" (fpregs.f_fpcntl[0]),
+ "=m" (fpregs.f_fpcntl[1]),
+ "=m" (fpregs.f_fpcntl[2])
+ : /* no inputs */
+ : "memory");
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fmovemx %%fp0-%%fp7,%0\n\t"
+ "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
+ ".chip 68k"
+ : "=m" (*fpregs.f_fpregs),
+ "=m" (*fpregs.f_fpcntl)
+ : /* no inputs */
+ : "memory");
+ }
err |= copy_to_user(&uc->uc_mcontext.fpregs, &fpregs,
sizeof(fpregs));
}
@@ -679,8 +778,7 @@
"cpushl %%bc,(%0)\n\t"
".chip 68k"
: : "a" (temp));
- }
- else {
+ } else if (!CPU_IS_COLDFIRE) {
/*
* 68030/68020 have no writeback cache;
* still need to clear icache.
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index c468f2e..ce827b3 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -365,4 +365,6 @@
.long sys_clock_adjtime
.long sys_syncfs
.long sys_setns
+ .long sys_process_vm_readv /* 345 */
+ .long sys_process_vm_writev
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index a5cf40c..75ab79b 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -1,4 +1,4 @@
-#ifdef CONFIG_MMU
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
#include "time_mm.c"
#else
#include "time_no.c"
diff --git a/arch/m68k/kernel/time_no.c b/arch/m68k/kernel/time_no.c
index 6623909..3ef0f77 100644
--- a/arch/m68k/kernel/time_no.c
+++ b/arch/m68k/kernel/time_no.c
@@ -26,6 +26,9 @@
#define TICK_SIZE (tick_nsec / 1000)
+/* machine dependent timer functions */
+void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
+
static inline int set_rtc_mmss(unsigned long nowtime)
{
if (mach_set_clock_mmss)
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 89362f2..a76452c 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -706,6 +706,88 @@
#endif /* CPU_M68020_OR_M68030 */
#endif /* !CONFIG_SUN3 */
+#if defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
+#include <asm/mcfmmu.h>
+
+/*
+ * The following table converts the FS encoding of a ColdFire
+ * exception stack frame into the error_code value needed by
+ * do_fault.
+*/
+static const unsigned char fs_err_code[] = {
+ 0, /* 0000 */
+ 0, /* 0001 */
+ 0, /* 0010 */
+ 0, /* 0011 */
+ 1, /* 0100 */
+ 0, /* 0101 */
+ 0, /* 0110 */
+ 0, /* 0111 */
+ 2, /* 1000 */
+ 3, /* 1001 */
+ 2, /* 1010 */
+ 0, /* 1011 */
+ 1, /* 1100 */
+ 1, /* 1101 */
+ 0, /* 1110 */
+ 0 /* 1111 */
+};
+
+static inline void access_errorcf(unsigned int fs, struct frame *fp)
+{
+ unsigned long mmusr, addr;
+ unsigned int err_code;
+ int need_page_fault;
+
+ mmusr = mmu_read(MMUSR);
+ addr = mmu_read(MMUAR);
+
+ /*
+ * error_code:
+ * bit 0 == 0 means no page found, 1 means protection fault
+ * bit 1 == 0 means read, 1 means write
+ */
+ switch (fs) {
+ case 5: /* 0101 TLB opword X miss */
+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0);
+ addr = fp->ptregs.pc;
+ break;
+ case 6: /* 0110 TLB extension word X miss */
+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1);
+ addr = fp->ptregs.pc + sizeof(long);
+ break;
+ case 10: /* 1010 TLB W miss */
+ need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0);
+ break;
+ case 14: /* 1110 TLB R miss */
+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0);
+ break;
+ default:
+ /* 0000 Normal */
+ /* 0001 Reserved */
+ /* 0010 Interrupt during debug service routine */
+ /* 0011 Reserved */
+ /* 0100 X Protection */
+ /* 0111 IFP in emulator mode */
+ /* 1000 W Protection*/
+ /* 1001 Write error*/
+ /* 1011 Reserved*/
+ /* 1100 R Protection*/
+ /* 1101 R Protection*/
+ /* 1111 OEP in emulator mode*/
+ need_page_fault = 1;
+ break;
+ }
+
+ if (need_page_fault) {
+ err_code = fs_err_code[fs];
+ if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */
+ err_code |= 2; /* bit1 - write, bit0 - protection */
+ do_page_fault(&fp->ptregs, addr, err_code);
+ }
+}
+#endif /* CONFIG_COLDFIRE CONFIG_MMU */
+
asmlinkage void buserr_c(struct frame *fp)
{
/* Only set esp0 if coming from user mode */
@@ -716,6 +798,28 @@
printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format);
#endif
+#if defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
+ if (CPU_IS_COLDFIRE) {
+ unsigned int fs;
+ fs = (fp->ptregs.vector & 0x3) |
+ ((fp->ptregs.vector & 0xc00) >> 8);
+ switch (fs) {
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ case 0x9:
+ case 0xa:
+ case 0xd:
+ case 0xe:
+ case 0xf:
+ access_errorcf(fs, fp);
+ return;
+ default:
+ break;
+ }
+ }
+#endif /* CONFIG_COLDFIRE && CONFIG_MMU */
+
switch (fp->ptregs.format) {
#if defined (CONFIG_M68060)
case 4: /* 68060 access error */
diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux-nommu.lds
similarity index 96%
rename from arch/m68k/kernel/vmlinux.lds_no.S
rename to arch/m68k/kernel/vmlinux-nommu.lds
index 4e23893..8e66ccb 100644
--- a/arch/m68k/kernel/vmlinux.lds_no.S
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -69,6 +69,7 @@
SCHED_TEXT
LOCK_TEXT
*(.text..lock)
+ *(.fixup)
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
@@ -161,6 +162,13 @@
_edata = . ;
} > DATA
+ .m68k_fixup : {
+ __start_fixup = .;
+ *(.m68k_fixup)
+ __stop_fixup = .;
+ } > DATA
+ NOTES > DATA
+
.init.text : {
. = ALIGN(PAGE_SIZE);
__init_begin = .;
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index d099359..63407c8 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -31,7 +31,9 @@
RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
+ _sbss = .;
BSS_SECTION(0, 0, 0)
+ _ebss = .;
_edata = .; /* End of data section */
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 8080469..ad0f46d 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -44,7 +44,9 @@
. = ALIGN(PAGE_SIZE);
__init_end = .;
+ _sbss = .;
BSS_SECTION(0, 0, 0)
+ _ebss = .;
_end = . ;
diff --git a/arch/m68k/kernel/vmlinux.lds.S b/arch/m68k/kernel/vmlinux.lds.S
index 030dabf..69ec796 100644
--- a/arch/m68k/kernel/vmlinux.lds.S
+++ b/arch/m68k/kernel/vmlinux.lds.S
@@ -1,5 +1,14 @@
-#ifdef CONFIG_MMU
-#include "vmlinux.lds_mm.S"
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
+PHDRS
+{
+ text PT_LOAD FILEHDR PHDRS FLAGS (7);
+ data PT_LOAD FLAGS (7);
+}
+#ifdef CONFIG_SUN3
+#include "vmlinux-sun3.lds"
#else
-#include "vmlinux.lds_no.S"
+#include "vmlinux-std.lds"
+#endif
+#else
+#include "vmlinux-nommu.lds"
#endif
diff --git a/arch/m68k/kernel/vmlinux.lds_mm.S b/arch/m68k/kernel/vmlinux.lds_mm.S
deleted file mode 100644
index 99ba315..0000000
--- a/arch/m68k/kernel/vmlinux.lds_mm.S
+++ /dev/null
@@ -1,10 +0,0 @@
-PHDRS
-{
- text PT_LOAD FILEHDR PHDRS FLAGS (7);
- data PT_LOAD FLAGS (7);
-}
-#ifdef CONFIG_SUN3
-#include "vmlinux-sun3.lds"
-#else
-#include "vmlinux-std.lds"
-#endif
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index 1a1bd90..a9d782d 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -6,9 +6,11 @@
lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
memcpy.o memset.o memmove.o
-ifdef CONFIG_MMU
-lib-y += string.o uaccess.o checksum_mm.o
-else
-lib-y += mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o checksum_no.o
+lib-$(CONFIG_MMU) += string.o uaccess.o
+lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += mulsi3.o divsi3.o udivsi3.o
+lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += modsi3.o umodsi3.o
+
+ifndef CONFIG_GENERIC_CSUM
+lib-y += checksum.o
endif
diff --git a/arch/m68k/lib/checksum_mm.c b/arch/m68k/lib/checksum.c
similarity index 100%
rename from arch/m68k/lib/checksum_mm.c
rename to arch/m68k/lib/checksum.c
diff --git a/arch/m68k/lib/checksum_no.c b/arch/m68k/lib/checksum_no.c
deleted file mode 100644
index e4c6354..0000000
--- a/arch/m68k/lib/checksum_no.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
- * Fixed some nasty bugs, causing some horrible crashes.
- * A: At some points, the sum (%0) was used as
- * length-counter instead of the length counter
- * (%1). Thanks to Roman Hodek for pointing this out.
- * B: GCC seems to mess up if one uses too many
- * data-registers to hold input values and one tries to
- * specify d0 and d1 as scratch registers. Letting gcc choose these
- * registers itself solves the problem.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
- of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
- /* add up 16-bit and 16-bit for 16+c bit */
- x = (x & 0xffff) + (x >> 16);
- /* add up carry.. */
- x = (x & 0xffff) + (x >> 16);
- return x;
-}
-
-static unsigned long do_csum(const unsigned char * buff, int len)
-{
- int odd, count;
- unsigned long result = 0;
-
- if (len <= 0)
- goto out;
- odd = 1 & (unsigned long) buff;
- if (odd) {
- result = *buff;
- len--;
- buff++;
- }
- count = len >> 1; /* nr of 16-bit words.. */
- if (count) {
- if (2 & (unsigned long) buff) {
- result += *(unsigned short *) buff;
- count--;
- len -= 2;
- buff += 2;
- }
- count >>= 1; /* nr of 32-bit words.. */
- if (count) {
- unsigned long carry = 0;
- do {
- unsigned long w = *(unsigned long *) buff;
- count--;
- buff += 4;
- result += carry;
- result += w;
- carry = (w > result);
- } while (count);
- result += carry;
- result = (result & 0xffff) + (result >> 16);
- }
- if (len & 2) {
- result += *(unsigned short *) buff;
- buff += 2;
- }
- }
- if (len & 1)
- result += (*buff << 8);
- result = from32to16(result);
- if (odd)
- result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
- return result;
-}
-
-#ifdef CONFIG_COLDFIRE
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- return (__force __sum16)~do_csum(iph,ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-#endif
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
- unsigned int result = do_csum(buff, len);
-
- /* add in old sum, and carry.. */
- result += (__force u32)sum;
- if ((__force u32)sum > result)
- result += 1;
- return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err)
-{
- if (csum_err) *csum_err = 0;
- memcpy(dst, (__force const void *)src, len);
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c
index 13854ed..5664386 100644
--- a/arch/m68k/lib/uaccess.c
+++ b/arch/m68k/lib/uaccess.c
@@ -15,17 +15,17 @@
asm volatile ("\n"
" tst.l %0\n"
" jeq 2f\n"
- "1: moves.l (%1)+,%3\n"
+ "1: "MOVES".l (%1)+,%3\n"
" move.l %3,(%2)+\n"
" subq.l #1,%0\n"
" jne 1b\n"
"2: btst #1,%5\n"
" jeq 4f\n"
- "3: moves.w (%1)+,%3\n"
+ "3: "MOVES".w (%1)+,%3\n"
" move.w %3,(%2)+\n"
"4: btst #0,%5\n"
" jeq 6f\n"
- "5: moves.b (%1)+,%3\n"
+ "5: "MOVES".b (%1)+,%3\n"
" move.b %3,(%2)+\n"
"6:\n"
" .section .fixup,\"ax\"\n"
@@ -68,17 +68,17 @@
" tst.l %0\n"
" jeq 4f\n"
"1: move.l (%1)+,%3\n"
- "2: moves.l %3,(%2)+\n"
+ "2: "MOVES".l %3,(%2)+\n"
"3: subq.l #1,%0\n"
" jne 1b\n"
"4: btst #1,%5\n"
" jeq 6f\n"
" move.w (%1)+,%3\n"
- "5: moves.w %3,(%2)+\n"
+ "5: "MOVES".w %3,(%2)+\n"
"6: btst #0,%5\n"
" jeq 8f\n"
" move.b (%1)+,%3\n"
- "7: moves.b %3,(%2)+\n"
+ "7: "MOVES".b %3,(%2)+\n"
"8:\n"
" .section .fixup,\"ax\"\n"
" .even\n"
@@ -115,7 +115,7 @@
return count;
asm volatile ("\n"
- "1: moves.b (%2)+,%4\n"
+ "1: "MOVES".b (%2)+,%4\n"
" move.b %4,(%1)+\n"
" jeq 2f\n"
" subq.l #1,%3\n"
@@ -152,7 +152,7 @@
asm volatile ("\n"
"1: subq.l #1,%1\n"
" jmi 3f\n"
- "2: moves.b (%0)+,%2\n"
+ "2: "MOVES".b (%0)+,%2\n"
" tst.b %2\n"
" jne 1b\n"
" jra 4f\n"
@@ -188,15 +188,15 @@
asm volatile ("\n"
" tst.l %0\n"
" jeq 3f\n"
- "1: moves.l %2,(%1)+\n"
+ "1: "MOVES".l %2,(%1)+\n"
"2: subq.l #1,%0\n"
" jne 1b\n"
"3: btst #1,%4\n"
" jeq 5f\n"
- "4: moves.w %2,(%1)+\n"
+ "4: "MOVES".w %2,(%1)+\n"
"5: btst #0,%4\n"
" jeq 7f\n"
- "6: moves.b %2,(%1)\n"
+ "6: "MOVES".b %2,(%1)\n"
"7:\n"
" .section .fixup,\"ax\"\n"
" .even\n"
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index b403924..3fe0e43 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -8,13 +8,8 @@
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/irq.h>
-#include <asm/traps.h>
-#include <asm/bootinfo.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_baboon.h>
@@ -23,7 +18,6 @@
int baboon_present;
static volatile struct baboon *baboon;
-static unsigned char baboon_disabled;
#if 0
extern int macide_ack_intr(struct ata_channel *);
@@ -89,51 +83,32 @@
void __init baboon_register_interrupts(void)
{
- baboon_disabled = 0;
irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
}
/*
- * The means for masking individual baboon interrupts remains a mystery, so
- * enable the umbrella interrupt only when no baboon interrupt is disabled.
+ * The means for masking individual Baboon interrupts remains a mystery.
+ * However, since we only use the IDE IRQ, we can just enable/disable all
+ * Baboon interrupts. If/when we handle more than one Baboon IRQ, we must
+ * either figure out how to mask them individually or else implement the
+ * same workaround that's used for NuBus slots (see nubus_disabled and
+ * via_nubus_irq_shutdown).
*/
void baboon_irq_enable(int irq)
{
- int irq_idx = IRQ_IDX(irq);
-
#ifdef DEBUG_IRQUSE
printk("baboon_irq_enable(%d)\n", irq);
#endif
- baboon_disabled &= ~(1 << irq_idx);
- if (!baboon_disabled)
- mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
+ mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
}
void baboon_irq_disable(int irq)
{
- int irq_idx = IRQ_IDX(irq);
-
#ifdef DEBUG_IRQUSE
printk("baboon_irq_disable(%d)\n", irq);
#endif
- baboon_disabled |= 1 << irq_idx;
- if (baboon_disabled)
- mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
-}
-
-void baboon_irq_clear(int irq)
-{
- int irq_idx = IRQ_IDX(irq);
-
- baboon->mb_ifr &= ~(1 << irq_idx);
-}
-
-int baboon_irq_pending(int irq)
-{
- int irq_idx = IRQ_IDX(irq);
-
- return baboon->mb_ifr & (1 << irq_idx);
+ mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
}
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index c247de0..f60ff5f 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -71,6 +71,31 @@
static void mac_identify(void);
static void mac_report_hardware(void);
+#ifdef CONFIG_EARLY_PRINTK
+asmlinkage void __init mac_early_print(const char *s, unsigned n);
+
+static void __init mac_early_cons_write(struct console *con,
+ const char *s, unsigned n)
+{
+ mac_early_print(s, n);
+}
+
+static struct console __initdata mac_early_cons = {
+ .name = "early",
+ .write = mac_early_cons_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1
+};
+
+int __init mac_unregister_early_cons(void)
+{
+ /* mac_early_print can't be used after init sections are discarded */
+ return unregister_console(&mac_early_cons);
+}
+
+late_initcall(mac_unregister_early_cons);
+#endif
+
static void __init mac_sched_init(irq_handler_t vector)
{
via_init_clock(vector);
@@ -164,6 +189,10 @@
mach_beep = mac_mksound;
#endif
+#ifdef CONFIG_EARLY_PRINTK
+ register_console(&mac_early_cons);
+#endif
+
/*
* Determine hardware present
*/
@@ -192,7 +221,7 @@
* inaccurate, so look here if a new Mac model won't run. Example: if
* a Mac crashes immediately after the VIA1 registers have been dumped
* to the screen, it probably died attempting to read DirB on a RBV.
- * Meaning it should have MAC_VIA_IIci here :-)
+ * Meaning it should have MAC_VIA_IICI here :-)
*/
struct mac_model *macintosh_config;
@@ -267,7 +296,7 @@
.ident = MAC_MODEL_IICI,
.name = "IIci",
.adb_type = MAC_ADB_II,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -276,7 +305,7 @@
.ident = MAC_MODEL_IIFX,
.name = "IIfx",
.adb_type = MAC_ADB_IOP,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_IOP,
.nubus_type = MAC_NUBUS,
@@ -285,7 +314,7 @@
.ident = MAC_MODEL_IISI,
.name = "IIsi",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -294,7 +323,7 @@
.ident = MAC_MODEL_IIVI,
.name = "IIvi",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -303,7 +332,7 @@
.ident = MAC_MODEL_IIVX,
.name = "IIvx",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -318,7 +347,7 @@
.ident = MAC_MODEL_CLII,
.name = "Classic II",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -327,7 +356,7 @@
.ident = MAC_MODEL_CCL,
.name = "Color Classic",
.adb_type = MAC_ADB_CUDA,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -336,7 +365,7 @@
.ident = MAC_MODEL_CCLII,
.name = "Color Classic II",
.adb_type = MAC_ADB_CUDA,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -351,7 +380,7 @@
.ident = MAC_MODEL_LC,
.name = "LC",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -360,7 +389,7 @@
.ident = MAC_MODEL_LCII,
.name = "LC II",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -369,7 +398,7 @@
.ident = MAC_MODEL_LCIII,
.name = "LC III",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -497,7 +526,7 @@
.ident = MAC_MODEL_P460,
.name = "Performa 460",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -524,7 +553,7 @@
.ident = MAC_MODEL_P520,
.name = "Performa 520",
.adb_type = MAC_ADB_CUDA,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -533,7 +562,7 @@
.ident = MAC_MODEL_P550,
.name = "Performa 550",
.adb_type = MAC_ADB_CUDA,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -565,7 +594,7 @@
.ident = MAC_MODEL_TV,
.name = "TV",
.adb_type = MAC_ADB_CUDA,
- .via_type = MAC_VIA_QUADRA,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -574,7 +603,7 @@
.ident = MAC_MODEL_P600,
.name = "Performa 600",
.adb_type = MAC_ADB_IISI,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
@@ -645,8 +674,8 @@
}, {
.ident = MAC_MODEL_PB150,
.name = "PowerBook 150",
- .adb_type = MAC_ADB_PB1,
- .via_type = MAC_VIA_IIci,
+ .adb_type = MAC_ADB_PB2,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.ide_type = MAC_IDE_PB,
.scc_type = MAC_SCC_QUADRA,
@@ -732,17 +761,13 @@
* PowerBook Duos are pretty much like normal PowerBooks
* All of these probably have onboard SONIC in the Dock which
* means we'll have to probe for it eventually.
- *
- * Are these really MAC_VIA_IIci? The developer notes for the
- * Duos show pretty much the same custom parts as in most of
- * the other PowerBooks which would imply MAC_VIA_QUADRA.
*/
{
.ident = MAC_MODEL_PB210,
.name = "PowerBook Duo 210",
.adb_type = MAC_ADB_PB2,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
@@ -751,7 +776,7 @@
.ident = MAC_MODEL_PB230,
.name = "PowerBook Duo 230",
.adb_type = MAC_ADB_PB2,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
@@ -760,7 +785,7 @@
.ident = MAC_MODEL_PB250,
.name = "PowerBook Duo 250",
.adb_type = MAC_ADB_PB2,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
@@ -769,7 +794,7 @@
.ident = MAC_MODEL_PB270C,
.name = "PowerBook Duo 270c",
.adb_type = MAC_ADB_PB2,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
@@ -778,7 +803,7 @@
.ident = MAC_MODEL_PB280,
.name = "PowerBook Duo 280",
.adb_type = MAC_ADB_PB2,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
@@ -787,7 +812,7 @@
.ident = MAC_MODEL_PB280C,
.name = "PowerBook Duo 280c",
.adb_type = MAC_ADB_PB2,
- .via_type = MAC_VIA_IIci,
+ .via_type = MAC_VIA_IICI,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
@@ -864,8 +889,14 @@
scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B;
break;
default:
- scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC;
- scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC;
+ /* On non-PSC machines, the serial ports share an IRQ. */
+ if (macintosh_config->ident == MAC_MODEL_IIFX) {
+ scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC;
+ scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC;
+ } else {
+ scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_AUTO_4;
+ scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_AUTO_4;
+ }
break;
}
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index a5462cc..7d8d461 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -115,7 +115,6 @@
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_iop.h>
-#include <asm/mac_oss.h>
/*#define DEBUG_IOP*/
@@ -149,8 +148,6 @@
irqreturn_t iop_ism_irq(int, void *);
-extern void oss_irq_enable(int);
-
/*
* Private access functions
*/
@@ -304,11 +301,10 @@
void __init iop_register_interrupts(void)
{
if (iop_ism_present) {
- if (oss_present) {
- if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+ if (macintosh_config->ident == MAC_MODEL_IIFX) {
+ if (request_irq(IRQ_MAC_ADB, iop_ism_irq, 0,
"ISM IOP", (void *)IOP_NUM_ISM))
pr_err("Couldn't register ISM IOP interrupt\n");
- oss_irq_enable(IRQ_MAC_ADB);
} else {
if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
(void *)IOP_NUM_ISM))
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index ba220b7..5c1a6b2 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -26,10 +26,6 @@
* - slot 6: timer 1 (not on IIci)
* - slot 7: status of IRQ; signals 'any enabled int.'
*
- * 2 - OSS (IIfx only?)
- * - slot 0: SCSI interrupt
- * - slot 1: Sound interrupt
- *
* Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
*
* 3 - unused (?)
@@ -42,21 +38,30 @@
*
* 6 - off switch (?)
*
- * For OSS Macintoshes (IIfx only at this point):
+ * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
+ * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
+ * sound out to their own autovector IRQs and gives VIA1 a higher priority:
*
- * 3 - Nubus interrupt
- * - slot 0: Slot $9
- * - slot 1: Slot $A
- * - slot 2: Slot $B
- * - slot 3: Slot $C
- * - slot 4: Slot $D
- * - slot 5: Slot $E
+ * 1 - unused (?)
+ *
+ * 3 - on-board SONIC
+ *
+ * 5 - Apple Sound Chip (ASC)
+ *
+ * 6 - VIA1
+ *
+ * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
+ * the Quadra (A/UX) mapping:
+ *
+ * 1 - ISM IOP (ADB)
+ *
+ * 2 - SCSI
+ *
+ * 3 - NuBus
*
* 4 - SCC IOP
*
- * 5 - ISM IOP (ADB?)
- *
- * 6 - unused
+ * 6 - VIA1
*
* For PSC Macintoshes (660AV, 840AV):
*
@@ -100,88 +105,29 @@
* case. They're hidden behind the Nubus slot $C interrupt thus adding a
* third layer of indirection. Why oh why did the Apple engineers do that?
*
- * - We support "fast" and "slow" handlers, just like the Amiga port. The
- * fast handlers are called first and with all interrupts disabled. They
- * are expected to execute quickly (hence the name). The slow handlers are
- * called last with interrupts enabled and the interrupt level restored.
- * They must therefore be reentrant.
- *
- * TODO:
- *
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h> /* for intr_count */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/bootinfo.h>
#include <asm/macintosh.h>
+#include <asm/macints.h>
#include <asm/mac_via.h>
#include <asm/mac_psc.h>
-#include <asm/hwtest.h>
-#include <asm/errno.h>
-#include <asm/macints.h>
-#include <asm/irq_regs.h>
#include <asm/mac_oss.h>
+#include <asm/mac_iop.h>
+#include <asm/mac_baboon.h>
+#include <asm/hwtest.h>
+#include <asm/irq_regs.h>
#define SHUTUP_SONIC
/*
- * VIA/RBV hooks
- */
-
-extern void via_register_interrupts(void);
-extern void via_irq_enable(int);
-extern void via_irq_disable(int);
-extern void via_irq_clear(int);
-extern int via_irq_pending(int);
-
-/*
- * OSS hooks
- */
-
-extern void oss_register_interrupts(void);
-extern void oss_irq_enable(int);
-extern void oss_irq_disable(int);
-extern void oss_irq_clear(int);
-extern int oss_irq_pending(int);
-
-/*
- * PSC hooks
- */
-
-extern void psc_register_interrupts(void);
-extern void psc_irq_enable(int);
-extern void psc_irq_disable(int);
-extern void psc_irq_clear(int);
-extern int psc_irq_pending(int);
-
-/*
- * IOP hooks
- */
-
-extern void iop_register_interrupts(void);
-
-/*
- * Baboon hooks
- */
-
-extern int baboon_present;
-
-extern void baboon_register_interrupts(void);
-extern void baboon_irq_enable(int);
-extern void baboon_irq_disable(int);
-extern void baboon_irq_clear(int);
-
-/*
* console_loglevel determines NMI handler function
*/
@@ -190,10 +136,15 @@
/* #define DEBUG_MACINTS */
+static unsigned int mac_irq_startup(struct irq_data *);
+static void mac_irq_shutdown(struct irq_data *);
+
static struct irq_chip mac_irq_chip = {
.name = "mac",
.irq_enable = mac_irq_enable,
.irq_disable = mac_irq_disable,
+ .irq_startup = mac_irq_startup,
+ .irq_shutdown = mac_irq_shutdown,
};
void __init mac_init_IRQ(void)
@@ -239,8 +190,6 @@
/*
* mac_irq_enable - enable an interrupt source
* mac_irq_disable - disable an interrupt source
- * mac_clear_irq - clears a pending interrupt
- * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending)
*
* These routines are just dispatchers to the VIA/OSS/PSC routines.
*/
@@ -252,8 +201,6 @@
switch(irq_src) {
case 1:
- via_irq_enable(irq);
- break;
case 2:
case 7:
if (oss_present)
@@ -262,6 +209,7 @@
via_irq_enable(irq);
break;
case 3:
+ case 4:
case 5:
case 6:
if (psc_present)
@@ -269,10 +217,6 @@
else if (oss_present)
oss_irq_enable(irq);
break;
- case 4:
- if (psc_present)
- psc_irq_enable(irq);
- break;
case 8:
if (baboon_present)
baboon_irq_enable(irq);
@@ -287,8 +231,6 @@
switch(irq_src) {
case 1:
- via_irq_disable(irq);
- break;
case 2:
case 7:
if (oss_present)
@@ -297,6 +239,7 @@
via_irq_disable(irq);
break;
case 3:
+ case 4:
case 5:
case 6:
if (psc_present)
@@ -304,10 +247,6 @@
else if (oss_present)
oss_irq_disable(irq);
break;
- case 4:
- if (psc_present)
- psc_irq_disable(irq);
- break;
case 8:
if (baboon_present)
baboon_irq_disable(irq);
@@ -315,65 +254,27 @@
}
}
-void mac_clear_irq(unsigned int irq)
+static unsigned int mac_irq_startup(struct irq_data *data)
{
- switch(IRQ_SRC(irq)) {
- case 1:
- via_irq_clear(irq);
- break;
- case 2:
- case 7:
- if (oss_present)
- oss_irq_clear(irq);
- else
- via_irq_clear(irq);
- break;
- case 3:
- case 5:
- case 6:
- if (psc_present)
- psc_irq_clear(irq);
- else if (oss_present)
- oss_irq_clear(irq);
- break;
- case 4:
- if (psc_present)
- psc_irq_clear(irq);
- break;
- case 8:
- if (baboon_present)
- baboon_irq_clear(irq);
- break;
- }
-}
+ int irq = data->irq;
-int mac_irq_pending(unsigned int irq)
-{
- switch(IRQ_SRC(irq)) {
- case 1:
- return via_irq_pending(irq);
- case 2:
- case 7:
- if (oss_present)
- return oss_irq_pending(irq);
- else
- return via_irq_pending(irq);
- case 3:
- case 5:
- case 6:
- if (psc_present)
- return psc_irq_pending(irq);
- else if (oss_present)
- return oss_irq_pending(irq);
- break;
- case 4:
- if (psc_present)
- return psc_irq_pending(irq);
- break;
- }
+ if (IRQ_SRC(irq) == 7 && !oss_present)
+ via_nubus_irq_startup(irq);
+ else
+ mac_irq_enable(data);
+
return 0;
}
-EXPORT_SYMBOL(mac_irq_pending);
+
+static void mac_irq_shutdown(struct irq_data *data)
+{
+ int irq = data->irq;
+
+ if (IRQ_SRC(irq) == 7 && !oss_present)
+ via_nubus_irq_shutdown(irq);
+ else
+ mac_irq_disable(data);
+}
static int num_debug[8];
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index a4c82da..6c4c882 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -1,5 +1,5 @@
/*
- * OSS handling
+ * Operating System Services (OSS) chip handling
* Written by Joshua M. Thompson (funaho@jurai.org)
*
*
@@ -30,8 +30,6 @@
int oss_present;
volatile struct mac_oss *oss;
-extern void via1_irq(unsigned int irq, struct irq_desc *desc);
-
/*
* Initialize the OSS
*
@@ -51,10 +49,8 @@
/* do this by setting the source's interrupt level to zero. */
for (i = 0; i <= OSS_NUM_SOURCES; i++) {
- oss->irq_level[i] = OSS_IRQLEV_DISABLED;
+ oss->irq_level[i] = 0;
}
- /* If we disable VIA1 here, we never really handle it... */
- oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1;
}
/*
@@ -66,17 +62,13 @@
}
/*
- * Handle miscellaneous OSS interrupts. Right now that's just sound
- * and SCSI; everything else is routed to its own autovector IRQ.
+ * Handle miscellaneous OSS interrupts.
*/
static void oss_irq(unsigned int irq, struct irq_desc *desc)
{
- int events;
-
- events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
- if (!events)
- return;
+ int events = oss->irq_pending &
+ (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM);
#ifdef DEBUG_IRQS
if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
@@ -84,16 +76,20 @@
(int) oss->irq_pending);
}
#endif
- /* FIXME: how do you clear a pending IRQ? */
- if (events & OSS_IP_SOUND) {
- oss->irq_pending &= ~OSS_IP_SOUND;
- /* FIXME: call sound handler */
- } else if (events & OSS_IP_SCSI) {
+ if (events & OSS_IP_IOPSCC) {
+ oss->irq_pending &= ~OSS_IP_IOPSCC;
+ generic_handle_irq(IRQ_MAC_SCC);
+ }
+
+ if (events & OSS_IP_SCSI) {
oss->irq_pending &= ~OSS_IP_SCSI;
generic_handle_irq(IRQ_MAC_SCSI);
- } else {
- /* FIXME: error check here? */
+ }
+
+ if (events & OSS_IP_IOPISM) {
+ oss->irq_pending &= ~OSS_IP_IOPISM;
+ generic_handle_irq(IRQ_MAC_ADB);
}
}
@@ -132,14 +128,29 @@
/*
* Register the OSS and NuBus interrupt dispatchers.
+ *
+ * This IRQ mapping is laid out with two things in mind: first, we try to keep
+ * things on their own levels to avoid having to do double-dispatches. Second,
+ * the levels match as closely as possible the alternate IRQ mapping mode (aka
+ * "A/UX mode") available on some VIA machines.
*/
+#define OSS_IRQLEV_IOPISM IRQ_AUTO_1
+#define OSS_IRQLEV_SCSI IRQ_AUTO_2
+#define OSS_IRQLEV_NUBUS IRQ_AUTO_3
+#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4
+#define OSS_IRQLEV_VIA1 IRQ_AUTO_6
+
void __init oss_register_interrupts(void)
{
- irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq);
- irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq);
- irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq);
- irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq);
+ irq_set_chained_handler(OSS_IRQLEV_IOPISM, oss_irq);
+ irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq);
+ irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq);
+ irq_set_chained_handler(OSS_IRQLEV_IOPSCC, oss_irq);
+ irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq);
+
+ /* OSS_VIA1 gets enabled here because it has no machspec interrupt. */
+ oss->irq_level[OSS_VIA1] = IRQ_AUTO_6;
}
/*
@@ -158,13 +169,13 @@
switch(irq) {
case IRQ_MAC_SCC:
oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC;
- break;
+ return;
case IRQ_MAC_ADB:
oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM;
- break;
+ return;
case IRQ_MAC_SCSI:
oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI;
- break;
+ return;
case IRQ_NUBUS_9:
case IRQ_NUBUS_A:
case IRQ_NUBUS_B:
@@ -173,13 +184,11 @@
case IRQ_NUBUS_E:
irq -= NUBUS_SOURCE_BASE;
oss->irq_level[irq] = OSS_IRQLEV_NUBUS;
- break;
-#ifdef DEBUG_IRQUSE
- default:
- printk("%s unknown irq %d\n", __func__, irq);
- break;
-#endif
+ return;
}
+
+ if (IRQ_SRC(irq) == 1)
+ via_irq_enable(irq);
}
/*
@@ -195,14 +204,14 @@
#endif
switch(irq) {
case IRQ_MAC_SCC:
- oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED;
- break;
+ oss->irq_level[OSS_IOPSCC] = 0;
+ return;
case IRQ_MAC_ADB:
- oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_DISABLED;
- break;
+ oss->irq_level[OSS_IOPISM] = 0;
+ return;
case IRQ_MAC_SCSI:
- oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED;
- break;
+ oss->irq_level[OSS_SCSI] = 0;
+ return;
case IRQ_NUBUS_9:
case IRQ_NUBUS_A:
case IRQ_NUBUS_B:
@@ -210,72 +219,10 @@
case IRQ_NUBUS_D:
case IRQ_NUBUS_E:
irq -= NUBUS_SOURCE_BASE;
- oss->irq_level[irq] = OSS_IRQLEV_DISABLED;
- break;
-#ifdef DEBUG_IRQUSE
- default:
- printk("%s unknown irq %d\n", __func__, irq);
- break;
-#endif
+ oss->irq_level[irq] = 0;
+ return;
}
-}
-/*
- * Clear an OSS interrupt
- *
- * Not sure if this works or not but it's the only method I could
- * think of based on the contents of the mac_oss structure.
- */
-
-void oss_irq_clear(int irq) {
- /* FIXME: how to do this on OSS? */
- switch(irq) {
- case IRQ_MAC_SCC:
- oss->irq_pending &= ~OSS_IP_IOPSCC;
- break;
- case IRQ_MAC_ADB:
- oss->irq_pending &= ~OSS_IP_IOPISM;
- break;
- case IRQ_MAC_SCSI:
- oss->irq_pending &= ~OSS_IP_SCSI;
- break;
- case IRQ_NUBUS_9:
- case IRQ_NUBUS_A:
- case IRQ_NUBUS_B:
- case IRQ_NUBUS_C:
- case IRQ_NUBUS_D:
- case IRQ_NUBUS_E:
- irq -= NUBUS_SOURCE_BASE;
- oss->irq_pending &= ~(1 << irq);
- break;
- }
-}
-
-/*
- * Check to see if a specific OSS interrupt is pending
- */
-
-int oss_irq_pending(int irq)
-{
- switch(irq) {
- case IRQ_MAC_SCC:
- return oss->irq_pending & OSS_IP_IOPSCC;
- break;
- case IRQ_MAC_ADB:
- return oss->irq_pending & OSS_IP_IOPISM;
- break;
- case IRQ_MAC_SCSI:
- return oss->irq_pending & OSS_IP_SCSI;
- break;
- case IRQ_NUBUS_9:
- case IRQ_NUBUS_A:
- case IRQ_NUBUS_B:
- case IRQ_NUBUS_C:
- case IRQ_NUBUS_D:
- case IRQ_NUBUS_E:
- irq -= NUBUS_SOURCE_BASE;
- return oss->irq_pending & (1 << irq);
- break;
- }
- return 0;
+ if (IRQ_SRC(irq) == 1)
+ via_irq_disable(irq);
}
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index e6c2d20..6f026fc 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -180,20 +180,3 @@
#endif
psc_write_byte(pIER, 1 << irq_idx);
}
-
-void psc_irq_clear(int irq) {
- int irq_src = IRQ_SRC(irq);
- int irq_idx = IRQ_IDX(irq);
- int pIFR = pIERbase + (irq_src << 4);
-
- psc_write_byte(pIFR, 1 << irq_idx);
-}
-
-int psc_irq_pending(int irq)
-{
- int irq_src = IRQ_SRC(irq);
- int irq_idx = IRQ_IDX(irq);
- int pIFR = pIERbase + (irq_src << 4);
-
- return psc_read_byte(pIFR) & (1 << irq_idx);
-}
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index f1600ad..2d85662 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -63,24 +63,50 @@
#define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF)
#define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8)
-/* To disable a NuBus slot on Quadras we make that slot IRQ line an output set
- * high. On RBV we just use the slot interrupt enable register. On Macs with
- * genuine VIA chips we must use nubus_disabled to keep track of disabled slot
- * interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1
- * or "SLOTS" interrupt. When no slot is disabled, we unmask the CA1 interrupt.
- * So, on genuine VIAs, having more than one NuBus IRQ can mean trouble,
- * because closing one of those drivers can mask all of the NuBus interrupts.
- * Also, since we can't mask the unregistered slot IRQs on genuine VIAs, it's
- * possible to get interrupts from cards that MacOS or the ROM has configured
- * but we have not. FWIW, "Designing Cards and Drivers for Macintosh II and
- * Macintosh SE", page 9-8, says, a slot IRQ with no driver would crash MacOS.
+
+/*
+ * On Macs with a genuine VIA chip there is no way to mask an individual slot
+ * interrupt. This limitation also seems to apply to VIA clone logic cores in
+ * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.)
+ *
+ * We used to fake it by configuring the relevent VIA pin as an output
+ * (to mask the interrupt) or input (to unmask). That scheme did not work on
+ * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector
+ * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE,
+ * p. 10-11 etc) but VIA outputs are not (see datasheet).
+ *
+ * Driving these outputs high must cause the VIA to source current and the
+ * card to sink current when it asserts /NMRQ. Current will flow but the pin
+ * voltage is uncertain and so the /NMRQ condition may still cause a transition
+ * at the VIA2 CA1 input (which explains the lost interrupts). A side effect
+ * is that a disabled slot IRQ can never be tested as pending or not.
+ *
+ * Driving these outputs low doesn't work either. All the slot /NMRQ lines are
+ * (active low) OR'd together to generate the CA1 (aka "SLOTS") interrupt (see
+ * The Guide To Macintosh Family Hardware, 2nd edition p. 167). If we drive a
+ * disabled /NMRQ line low, the falling edge immediately triggers a CA1
+ * interrupt and all slot interrupts after that will generate no transition
+ * and therefore no interrupt, even after being re-enabled.
+ *
+ * So we make the VIA port A I/O lines inputs and use nubus_disabled to keep
+ * track of their states. When any slot IRQ becomes disabled we mask the CA1
+ * umbrella interrupt. Only when all slot IRQs become enabled do we unmask
+ * the CA1 interrupt. It must remain enabled even when cards have no interrupt
+ * handler registered. Drivers must therefore disable a slot interrupt at the
+ * device before they call free_irq (like shared and autovector interrupts).
+ *
+ * There is also a related problem when MacOS is used to boot Linux. A network
+ * card brought up by a MacOS driver may raise an interrupt while Linux boots.
+ * This can be fatal since it can't be handled until the right driver loads
+ * (if such a driver exists at all). Apparently related to this hardware
+ * limitation, "Designing Cards and Drivers", p. 9-8, says that a slot
+ * interrupt with no driver would crash MacOS (the book was written before
+ * the appearance of Macs with RBV or OSS).
*/
+
static u8 nubus_disabled;
void via_debug_dump(void);
-void via_irq_enable(int irq);
-void via_irq_disable(int irq);
-void via_irq_clear(int irq);
/*
* Initialize the VIAs
@@ -100,7 +126,7 @@
/* IIci, IIsi, IIvx, IIvi (P6xx), LC series */
- case MAC_VIA_IIci:
+ case MAC_VIA_IICI:
via1 = (void *) VIA1_BASE;
if (macintosh_config->ident == MAC_MODEL_IIFX) {
via2 = NULL;
@@ -197,38 +223,17 @@
if (oss_present)
return;
- /* Some machines support an alternate IRQ mapping that spreads */
- /* Ethernet and Sound out to their own autolevel IRQs and moves */
- /* VIA1 to level 6. A/UX uses this mapping and we do too. Note */
- /* that the IIfx emulates this alternate mapping using the OSS. */
-
- via_alt_mapping = 0;
- if (macintosh_config->via_type == MAC_VIA_QUADRA)
- switch (macintosh_config->ident) {
- case MAC_MODEL_C660:
- case MAC_MODEL_Q840:
- /* not applicable */
- break;
- case MAC_MODEL_P588:
- case MAC_MODEL_TV:
- case MAC_MODEL_PB140:
- case MAC_MODEL_PB145:
- case MAC_MODEL_PB160:
- case MAC_MODEL_PB165:
- case MAC_MODEL_PB165C:
- case MAC_MODEL_PB170:
- case MAC_MODEL_PB180:
- case MAC_MODEL_PB180C:
- case MAC_MODEL_PB190:
- case MAC_MODEL_PB520:
- /* not yet tested */
- break;
- default:
- via_alt_mapping = 1;
- via1[vDirB] |= 0x40;
- via1[vBufB] &= ~0x40;
- break;
- }
+ if ((macintosh_config->via_type == MAC_VIA_QUADRA) &&
+ (macintosh_config->adb_type != MAC_ADB_PB1) &&
+ (macintosh_config->adb_type != MAC_ADB_PB2) &&
+ (macintosh_config->ident != MAC_MODEL_C660) &&
+ (macintosh_config->ident != MAC_MODEL_Q840)) {
+ via_alt_mapping = 1;
+ via1[vDirB] |= 0x40;
+ via1[vBufB] &= ~0x40;
+ } else {
+ via_alt_mapping = 0;
+ }
/*
* Now initialize VIA2. For RBV we just kill all interrupts;
@@ -248,22 +253,28 @@
via2[vACR] &= ~0x03; /* disable port A & B latches */
}
+ /* Everything below this point is VIA2 only... */
+
+ if (rbv_present)
+ return;
+
/*
- * Set vPCR for control line interrupts (but not on RBV)
+ * Set vPCR for control line interrupts.
+ *
+ * CA1 (SLOTS IRQ), CB1 (ASC IRQ): negative edge trigger.
+ *
+ * Macs with ESP SCSI have a negative edge triggered SCSI interrupt.
+ * Testing reveals that PowerBooks do too. However, the SE/30
+ * schematic diagram shows an active high NCR5380 IRQ line.
*/
- if (!rbv_present) {
- /* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ)
- * are made negative edge triggered here.
- */
- if (macintosh_config->scsi_type == MAC_SCSI_OLD) {
- /* CB2 (IRQ) indep. input, positive edge */
- /* CA2 (DRQ) indep. input, positive edge */
- via2[vPCR] = 0x66;
- } else {
- /* CB2 (IRQ) indep. input, negative edge */
- /* CA2 (DRQ) indep. input, negative edge */
- via2[vPCR] = 0x22;
- }
+
+ pr_debug("VIA2 vPCR is 0x%02X\n", via2[vPCR]);
+ if (macintosh_config->via_type == MAC_VIA_II) {
+ /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, pos. edge */
+ via2[vPCR] = 0x66;
+ } else {
+ /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, neg. edge */
+ via2[vPCR] = 0x22;
}
}
@@ -378,34 +389,55 @@
via2[gBufB] |= 0x02;
}
- /* Disable all the slot interrupts (where possible). */
+ /*
+ * Disable the slot interrupts. On some hardware that's not possible.
+ * On some hardware it's unclear what all of these I/O lines do.
+ */
switch (macintosh_config->via_type) {
case MAC_VIA_II:
- /* Just make the port A lines inputs. */
- switch(macintosh_config->ident) {
- case MAC_MODEL_II:
- case MAC_MODEL_IIX:
- case MAC_MODEL_IICX:
- case MAC_MODEL_SE30:
- /* The top two bits are RAM size outputs. */
- via2[vDirA] &= 0xC0;
- break;
- default:
- via2[vDirA] &= 0x80;
- }
+ case MAC_VIA_QUADRA:
+ pr_debug("VIA2 vDirA is 0x%02X\n", via2[vDirA]);
break;
- case MAC_VIA_IIci:
+ case MAC_VIA_IICI:
/* RBV. Disable all the slot interrupts. SIER works like IER. */
via2[rSIER] = 0x7F;
break;
+ }
+}
+
+void via_nubus_irq_startup(int irq)
+{
+ int irq_idx = IRQ_IDX(irq);
+
+ switch (macintosh_config->via_type) {
+ case MAC_VIA_II:
case MAC_VIA_QUADRA:
- /* Disable the inactive slot interrupts by making those lines outputs. */
- if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
- (macintosh_config->adb_type != MAC_ADB_PB2)) {
- via2[vBufA] |= 0x7F;
- via2[vDirA] |= 0x7F;
+ /* Make the port A line an input. Probably redundant. */
+ if (macintosh_config->via_type == MAC_VIA_II) {
+ /* The top two bits are RAM size outputs. */
+ via2[vDirA] &= 0xC0 | ~(1 << irq_idx);
+ } else {
+ /* Allow NuBus slots 9 through F. */
+ via2[vDirA] &= 0x80 | ~(1 << irq_idx);
}
+ /* fall through */
+ case MAC_VIA_IICI:
+ via_irq_enable(irq);
+ break;
+ }
+}
+
+void via_nubus_irq_shutdown(int irq)
+{
+ switch (macintosh_config->via_type) {
+ case MAC_VIA_II:
+ case MAC_VIA_QUADRA:
+ /* Ensure that the umbrella CA1 interrupt remains enabled. */
+ via_irq_enable(irq);
+ break;
+ case MAC_VIA_IICI:
+ via_irq_disable(irq);
break;
}
}
@@ -531,25 +563,18 @@
} else if (irq_src == 7) {
switch (macintosh_config->via_type) {
case MAC_VIA_II:
+ case MAC_VIA_QUADRA:
nubus_disabled &= ~(1 << irq_idx);
/* Enable the CA1 interrupt when no slot is disabled. */
if (!nubus_disabled)
via2[gIER] = IER_SET_BIT(1);
break;
- case MAC_VIA_IIci:
+ case MAC_VIA_IICI:
/* On RBV, enable the slot interrupt.
* SIER works like IER.
*/
via2[rSIER] = IER_SET_BIT(irq_idx);
break;
- case MAC_VIA_QUADRA:
- /* Make the port A line an input to enable the slot irq.
- * But not on PowerBooks, that's ADB.
- */
- if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
- (macintosh_config->adb_type != MAC_ADB_PB2))
- via2[vDirA] &= ~(1 << irq_idx);
- break;
}
}
}
@@ -569,60 +594,18 @@
} else if (irq_src == 7) {
switch (macintosh_config->via_type) {
case MAC_VIA_II:
+ case MAC_VIA_QUADRA:
nubus_disabled |= 1 << irq_idx;
if (nubus_disabled)
via2[gIER] = IER_CLR_BIT(1);
break;
- case MAC_VIA_IIci:
+ case MAC_VIA_IICI:
via2[rSIER] = IER_CLR_BIT(irq_idx);
break;
- case MAC_VIA_QUADRA:
- if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
- (macintosh_config->adb_type != MAC_ADB_PB2))
- via2[vDirA] |= 1 << irq_idx;
- break;
}
}
}
-void via_irq_clear(int irq) {
- int irq_src = IRQ_SRC(irq);
- int irq_idx = IRQ_IDX(irq);
- int irq_bit = 1 << irq_idx;
-
- if (irq_src == 1) {
- via1[vIFR] = irq_bit;
- } else if (irq_src == 2) {
- via2[gIFR] = irq_bit | rbv_clear;
- } else if (irq_src == 7) {
- /* FIXME: There is no way to clear an individual nubus slot
- * IRQ flag, other than getting the device to do it.
- */
- }
-}
-
-/*
- * Returns nonzero if an interrupt is pending on the given
- * VIA/IRQ combination.
- */
-
-int via_irq_pending(int irq)
-{
- int irq_src = IRQ_SRC(irq);
- int irq_idx = IRQ_IDX(irq);
- int irq_bit = 1 << irq_idx;
-
- if (irq_src == 1) {
- return via1[vIFR] & irq_bit;
- } else if (irq_src == 2) {
- return via2[gIFR] & irq_bit;
- } else if (irq_src == 7) {
- /* Always 0 for MAC_VIA_QUADRA if the slot irq is disabled. */
- return ~via2[gBufA] & irq_bit;
- }
- return 0;
-}
-
void via1_set_head(int head)
{
if (head == 0)
@@ -631,3 +614,9 @@
via1[vBufA] |= VIA1A_vHeadSel;
}
EXPORT_SYMBOL(via1_set_head);
+
+int via2_scsi_drq_pending(void)
+{
+ return via2[gIFR] & (1 << IRQ_IDX(IRQ_MAC_SCSIDRQ));
+}
+EXPORT_SYMBOL(via2_scsi_drq_pending);
diff --git a/arch/m68k/mm/Makefile b/arch/m68k/mm/Makefile
index 09cadf1..cfbf320 100644
--- a/arch/m68k/mm/Makefile
+++ b/arch/m68k/mm/Makefile
@@ -4,6 +4,8 @@
obj-y := init.o
-obj-$(CONFIG_MMU) += cache.o fault.o hwtest.o
-obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o
-obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o
+obj-$(CONFIG_MMU) += cache.o fault.o
+obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o hwtest.o
+obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o hwtest.o
+obj-$(CONFIG_MMU_COLDFIRE) += kmap.o memory.o mcfmmu.o
+
diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c
index 5437fff..95d0bf6 100644
--- a/arch/m68k/mm/cache.c
+++ b/arch/m68k/mm/cache.c
@@ -74,8 +74,16 @@
/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
void flush_icache_range(unsigned long address, unsigned long endaddr)
{
-
- if (CPU_IS_040_OR_060) {
+ if (CPU_IS_COLDFIRE) {
+ unsigned long start, end;
+ start = address & ICACHE_SET_MASK;
+ end = endaddr & ICACHE_SET_MASK;
+ if (start > end) {
+ flush_cf_icache(0, end);
+ end = ICACHE_MAX_ADDR;
+ }
+ flush_cf_icache(start, end);
+ } else if (CPU_IS_040_OR_060) {
address &= PAGE_MASK;
do {
@@ -100,7 +108,17 @@
void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
unsigned long addr, int len)
{
- if (CPU_IS_040_OR_060) {
+ if (CPU_IS_COLDFIRE) {
+ unsigned long start, end;
+ start = addr & ICACHE_SET_MASK;
+ end = (addr + len) & ICACHE_SET_MASK;
+ if (start > end) {
+ flush_cf_icache(0, end);
+ end = ICACHE_MAX_ADDR;
+ }
+ flush_cf_icache(start, end);
+
+ } else if (CPU_IS_040_OR_060) {
asm volatile ("nop\n\t"
".chip 68040\n\t"
"cpushp %%bc,(%0)\n\t"
diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c
index bbe5254..89f3b20 100644
--- a/arch/m68k/mm/init_mm.c
+++ b/arch/m68k/mm/init_mm.c
@@ -24,6 +24,7 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/system.h>
+#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/io.h>
#ifdef CONFIG_ATARI
@@ -75,6 +76,38 @@
extern pmd_t *zero_pgtable;
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
+#define VECTORS &vectors[0]
+#else
+#define VECTORS _ramvec
+#endif
+
+void __init print_memmap(void)
+{
+#define UL(x) ((unsigned long) (x))
+#define MLK(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 10
+#define MLM(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 20
+#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), 1024)
+
+ pr_notice("Virtual kernel memory layout:\n"
+ " vector : 0x%08lx - 0x%08lx (%4ld KiB)\n"
+ " kmap : 0x%08lx - 0x%08lx (%4ld MiB)\n"
+ " vmalloc : 0x%08lx - 0x%08lx (%4ld MiB)\n"
+ " lowmem : 0x%08lx - 0x%08lx (%4ld MiB)\n"
+ " .init : 0x%p" " - 0x%p" " (%4d KiB)\n"
+ " .text : 0x%p" " - 0x%p" " (%4d KiB)\n"
+ " .data : 0x%p" " - 0x%p" " (%4d KiB)\n"
+ " .bss : 0x%p" " - 0x%p" " (%4d KiB)\n",
+ MLK(VECTORS, VECTORS + 256),
+ MLM(KMAP_START, KMAP_END),
+ MLM(VMALLOC_START, VMALLOC_END),
+ MLM(PAGE_OFFSET, (unsigned long)high_memory),
+ MLK_ROUNDUP(__init_begin, __init_end),
+ MLK_ROUNDUP(_stext, _etext),
+ MLK_ROUNDUP(_sdata, _edata),
+ MLK_ROUNDUP(_sbss, _ebss));
+}
+
void __init mem_init(void)
{
pg_data_t *pgdat;
@@ -106,7 +139,7 @@
}
}
-#ifndef CONFIG_SUN3
+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
/* insert pointer tables allocated so far into the tablelist */
init_pointer_table((unsigned long)kernel_pg_dir);
for (i = 0; i < PTRS_PER_PGD; i++) {
@@ -125,6 +158,7 @@
codepages << (PAGE_SHIFT-10),
datapages << (PAGE_SHIFT-10),
initpages << (PAGE_SHIFT-10));
+ print_memmap();
}
#ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 6934584..1cc2bed 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -171,7 +171,8 @@
break;
}
} else {
- physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY);
+ physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED |
+ _PAGE_DIRTY | _PAGE_READWRITE);
switch (cacheflag) {
case IOMAP_NOCACHE_SER:
case IOMAP_NOCACHE_NONSER:
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
new file mode 100644
index 0000000..babd5a9
--- /dev/null
+++ b/arch/m68k/mm/mcfmmu.c
@@ -0,0 +1,198 @@
+/*
+ * Based upon linux/arch/m68k/mm/sun3mmu.c
+ * Based upon linux/arch/ppc/mm/mmu_context.c
+ *
+ * Implementations of mm routines specific to the Coldfire MMU.
+ *
+ * Copyright (c) 2008 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu_context.h>
+#include <asm/mcf_pgalloc.h>
+#include <asm/tlbflush.h>
+
+#define KMAPAREA(x) ((x >= VMALLOC_START) && (x < KMAP_END))
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern unsigned long num_pages;
+
+void free_initmem(void)
+{
+}
+
+/*
+ * ColdFire paging_init derived from sun3.
+ */
+void __init paging_init(void)
+{
+ pgd_t *pg_dir;
+ pte_t *pg_table;
+ unsigned long address, size;
+ unsigned long next_pgtable, bootmem_end;
+ unsigned long zones_size[MAX_NR_ZONES];
+ enum zone_type zone;
+ int i;
+
+ empty_zero_page = (void *) alloc_bootmem_pages(PAGE_SIZE);
+ memset((void *) empty_zero_page, 0, PAGE_SIZE);
+
+ pg_dir = swapper_pg_dir;
+ memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
+
+ size = num_pages * sizeof(pte_t);
+ size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
+ next_pgtable = (unsigned long) alloc_bootmem_pages(size);
+
+ bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK;
+ pg_dir += PAGE_OFFSET >> PGDIR_SHIFT;
+
+ address = PAGE_OFFSET;
+ while (address < (unsigned long)high_memory) {
+ pg_table = (pte_t *) next_pgtable;
+ next_pgtable += PTRS_PER_PTE * sizeof(pte_t);
+ pgd_val(*pg_dir) = (unsigned long) pg_table;
+ pg_dir++;
+
+ /* now change pg_table to kernel virtual addresses */
+ for (i = 0; i < PTRS_PER_PTE; ++i, ++pg_table) {
+ pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
+ if (address >= (unsigned long) high_memory)
+ pte_val(pte) = 0;
+
+ set_pte(pg_table, pte);
+ address += PAGE_SIZE;
+ }
+ }
+
+ current->mm = NULL;
+
+ for (zone = 0; zone < MAX_NR_ZONES; zone++)
+ zones_size[zone] = 0x0;
+ zones_size[ZONE_DMA] = num_pages;
+ free_area_init(zones_size);
+}
+
+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
+{
+ unsigned long flags, mmuar;
+ struct mm_struct *mm;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int asid;
+
+ local_irq_save(flags);
+
+ mmuar = (dtlb) ? mmu_read(MMUAR) :
+ regs->pc + (extension_word * sizeof(long));
+
+ mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm;
+ if (!mm) {
+ local_irq_restore(flags);
+ return -1;
+ }
+
+ pgd = pgd_offset(mm, mmuar);
+ if (pgd_none(*pgd)) {
+ local_irq_restore(flags);
+ return -1;
+ }
+
+ pmd = pmd_offset(pgd, mmuar);
+ if (pmd_none(*pmd)) {
+ local_irq_restore(flags);
+ return -1;
+ }
+
+ pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar)
+ : pte_offset_map(pmd, mmuar);
+ if (pte_none(*pte) || !pte_present(*pte)) {
+ local_irq_restore(flags);
+ return -1;
+ }
+
+ if (write) {
+ if (!pte_write(*pte)) {
+ local_irq_restore(flags);
+ return -1;
+ }
+ set_pte(pte, pte_mkdirty(*pte));
+ }
+
+ set_pte(pte, pte_mkyoung(*pte));
+ asid = mm->context & 0xff;
+ if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
+ set_pte(pte, pte_wrprotect(*pte));
+
+ mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
+ (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
+ >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+
+ mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
+ ((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
+
+ if (dtlb)
+ mmu_write(MMUOR, MMUOR_ACC | MMUOR_UAA);
+ else
+ mmu_write(MMUOR, MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+/*
+ * Initialize the context management stuff.
+ * The following was taken from arch/ppc/mmu_context.c
+ */
+void __init mmu_context_init(void)
+{
+ /*
+ * Some processors have too few contexts to reserve one for
+ * init_mm, and require using context 0 for a normal task.
+ * Other processors reserve the use of context zero for the kernel.
+ * This code assumes FIRST_CONTEXT < 32.
+ */
+ context_map[0] = (1 << FIRST_CONTEXT) - 1;
+ next_mmu_context = FIRST_CONTEXT;
+ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+}
+
+/*
+ * Steal a context from a task that has one at the moment.
+ * This is only used on 8xx and 4xx and we presently assume that
+ * they don't do SMP. If they do then thicfpgalloc.hs will have to check
+ * whether the MM we steal is in use.
+ * We also assume that this is only used on systems that don't
+ * use an MMU hash table - this is true for 8xx and 4xx.
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :). This would be the
+ * place to implement an LRU scheme if anyone was motivated to do it.
+ * -- paulus
+ */
+void steal_context(void)
+{
+ struct mm_struct *mm;
+ /*
+ * free up context `next_mmu_context'
+ * if we shouldn't free context 0, don't...
+ */
+ if (next_mmu_context < FIRST_CONTEXT)
+ next_mmu_context = FIRST_CONTEXT;
+ mm = context_mm[next_mmu_context];
+ flush_tlb_mm(mm);
+ destroy_context(mm);
+}
+
diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c
index 34c77ce..a5dbb74 100644
--- a/arch/m68k/mm/memory.c
+++ b/arch/m68k/mm/memory.c
@@ -203,7 +203,9 @@
void cache_clear (unsigned long paddr, int len)
{
- if (CPU_IS_040_OR_060) {
+ if (CPU_IS_COLDFIRE) {
+ flush_cf_bcache(0, DCACHE_MAX_ADDR);
+ } else if (CPU_IS_040_OR_060) {
int tmp;
/*
@@ -250,7 +252,9 @@
void cache_push (unsigned long paddr, int len)
{
- if (CPU_IS_040_OR_060) {
+ if (CPU_IS_COLDFIRE) {
+ flush_cf_bcache(0, DCACHE_MAX_ADDR);
+ } else if (CPU_IS_040_OR_060) {
int tmp = PAGE_SIZE;
/*
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 31a66d9..c3fb3bd 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -124,6 +124,163 @@
#define PccSCCMICR 0x1d
#define PccSCCTICR 0x1e
#define PccSCCRICR 0x1f
+#define PccTPIACKR 0x25
+
+#ifdef CONFIG_EARLY_PRINTK
+
+/**** cd2401 registers ****/
+#define CD2401_ADDR (0xfff45000)
+
+#define CyGFRCR (0x81)
+#define CyCCR (0x13)
+#define CyCLR_CHAN (0x40)
+#define CyINIT_CHAN (0x20)
+#define CyCHIP_RESET (0x10)
+#define CyENB_XMTR (0x08)
+#define CyDIS_XMTR (0x04)
+#define CyENB_RCVR (0x02)
+#define CyDIS_RCVR (0x01)
+#define CyCAR (0xee)
+#define CyIER (0x11)
+#define CyMdmCh (0x80)
+#define CyRxExc (0x20)
+#define CyRxData (0x08)
+#define CyTxMpty (0x02)
+#define CyTxRdy (0x01)
+#define CyLICR (0x26)
+#define CyRISR (0x89)
+#define CyTIMEOUT (0x80)
+#define CySPECHAR (0x70)
+#define CyOVERRUN (0x08)
+#define CyPARITY (0x04)
+#define CyFRAME (0x02)
+#define CyBREAK (0x01)
+#define CyREOIR (0x84)
+#define CyTEOIR (0x85)
+#define CyMEOIR (0x86)
+#define CyNOTRANS (0x08)
+#define CyRFOC (0x30)
+#define CyRDR (0xf8)
+#define CyTDR (0xf8)
+#define CyMISR (0x8b)
+#define CyRISR (0x89)
+#define CyTISR (0x8a)
+#define CyMSVR1 (0xde)
+#define CyMSVR2 (0xdf)
+#define CyDSR (0x80)
+#define CyDCD (0x40)
+#define CyCTS (0x20)
+#define CyDTR (0x02)
+#define CyRTS (0x01)
+#define CyRTPRL (0x25)
+#define CyRTPRH (0x24)
+#define CyCOR1 (0x10)
+#define CyPARITY_NONE (0x00)
+#define CyPARITY_E (0x40)
+#define CyPARITY_O (0xC0)
+#define Cy_5_BITS (0x04)
+#define Cy_6_BITS (0x05)
+#define Cy_7_BITS (0x06)
+#define Cy_8_BITS (0x07)
+#define CyCOR2 (0x17)
+#define CyETC (0x20)
+#define CyCtsAE (0x02)
+#define CyCOR3 (0x16)
+#define Cy_1_STOP (0x02)
+#define Cy_2_STOP (0x04)
+#define CyCOR4 (0x15)
+#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
+#define CyCOR5 (0x14)
+#define CyCOR6 (0x18)
+#define CyCOR7 (0x07)
+#define CyRBPR (0xcb)
+#define CyRCOR (0xc8)
+#define CyTBPR (0xc3)
+#define CyTCOR (0xc0)
+#define CySCHR1 (0x1f)
+#define CySCHR2 (0x1e)
+#define CyTPR (0xda)
+#define CyPILR1 (0xe3)
+#define CyPILR2 (0xe0)
+#define CyPILR3 (0xe1)
+#define CyCMR (0x1b)
+#define CyASYNC (0x02)
+#define CyLICR (0x26)
+#define CyLIVR (0x09)
+#define CySCRL (0x23)
+#define CySCRH (0x22)
+#define CyTFTC (0x80)
+
+static void cons_write(struct console *co, const char *str, unsigned count)
+{
+ volatile unsigned char *base_addr = (u_char *)CD2401_ADDR;
+ volatile u_char sink;
+ u_char ier;
+ int port;
+ u_char do_lf = 0;
+ int i = 0;
+
+ /* Ensure transmitter is enabled! */
+
+ port = 0;
+ base_addr[CyCAR] = (u_char)port;
+ while (base_addr[CyCCR])
+ ;
+ base_addr[CyCCR] = CyENB_XMTR;
+
+ ier = base_addr[CyIER];
+ base_addr[CyIER] = CyTxMpty;
+
+ while (1) {
+ if (pcc2chip[PccSCCTICR] & 0x20)
+ {
+ /* We have a Tx int. Acknowledge it */
+ sink = pcc2chip[PccTPIACKR];
+ if ((base_addr[CyLICR] >> 2) == port) {
+ if (i == count) {
+ /* Last char of string is now output */
+ base_addr[CyTEOIR] = CyNOTRANS;
+ break;
+ }
+ if (do_lf) {
+ base_addr[CyTDR] = '\n';
+ str++;
+ i++;
+ do_lf = 0;
+ }
+ else if (*str == '\n') {
+ base_addr[CyTDR] = '\r';
+ do_lf = 1;
+ }
+ else {
+ base_addr[CyTDR] = *str++;
+ i++;
+ }
+ base_addr[CyTEOIR] = 0;
+ }
+ else
+ base_addr[CyTEOIR] = CyNOTRANS;
+ }
+ }
+
+ base_addr[CyIER] = ier;
+}
+
+static struct console cons_info =
+{
+ .name = "sercon",
+ .write = cons_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1,
+};
+
+static void __init mvme16x_early_console(void)
+{
+ register_console(&cons_info);
+
+ printk(KERN_INFO "MVME16x: early console registered\n");
+}
+#endif
void __init config_mvme16x(void)
{
@@ -183,6 +340,9 @@
pcc2chip[PccSCCMICR] = 0x10;
pcc2chip[PccSCCTICR] = 0x10;
pcc2chip[PccSCCRICR] = 0x10;
+#ifdef CONFIG_EARLY_PRINTK
+ mvme16x_early_console();
+#endif
}
}
diff --git a/arch/m68k/platform/54xx/config.c b/arch/m68k/platform/54xx/config.c
index 7813098..ee04354 100644
--- a/arch/m68k/platform/54xx/config.c
+++ b/arch/m68k/platform/54xx/config.c
@@ -13,11 +13,17 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <asm/pgalloc.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/m54xxsim.h>
#include <asm/mcfuart.h>
#include <asm/m54xxgpt.h>
+#ifdef CONFIG_MMU
+#include <asm/mmu_context.h>
+#endif
/***************************************************************************/
@@ -95,8 +101,49 @@
/***************************************************************************/
+#ifdef CONFIG_MMU
+
+unsigned long num_pages;
+
+static void __init mcf54xx_bootmem_alloc(void)
+{
+ unsigned long start_pfn;
+ unsigned long memstart;
+
+ /* _rambase and _ramend will be naturally page aligned */
+ m68k_memory[0].addr = _rambase;
+ m68k_memory[0].size = _ramend - _rambase;
+
+ /* compute total pages in system */
+ num_pages = (_ramend - _rambase) >> PAGE_SHIFT;
+
+ /* page numbers */
+ memstart = PAGE_ALIGN(_ramstart);
+ min_low_pfn = _rambase >> PAGE_SHIFT;
+ start_pfn = memstart >> PAGE_SHIFT;
+ max_low_pfn = _ramend >> PAGE_SHIFT;
+ high_memory = (void *)_ramend;
+
+ m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
+ module_fixup(NULL, __start_fixup, __stop_fixup);
+
+ /* setup bootmem data */
+ m68k_setup_node(0);
+ memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
+ min_low_pfn, max_low_pfn);
+ free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
+}
+
+#endif /* CONFIG_MMU */
+
+/***************************************************************************/
+
void __init config_BSP(char *commandp, int size)
{
+#ifdef CONFIG_MMU
+ mcf54xx_bootmem_alloc();
+ mmu_context_init();
+#endif
mach_reset = mcf54xx_reset;
m54xx_uarts_init();
}
diff --git a/arch/m68k/platform/68328/Makefile b/arch/m68k/platform/68328/Makefile
index e4dfd8f..ee61bf8 100644
--- a/arch/m68k/platform/68328/Makefile
+++ b/arch/m68k/platform/68328/Makefile
@@ -14,12 +14,8 @@
obj-$(CONFIG_ROM) += romvec.o
extra-y := head.o
-extra-$(CONFIG_M68328) += bootlogo.rh head.o
-
-$(obj)/bootlogo.rh: $(src)/bootlogo.h
- perl $(src)/bootlogo.pl < $(src)/bootlogo.h > $(obj)/bootlogo.rh
$(obj)/head.o: $(obj)/$(head-y)
ln -sf $(head-y) $(obj)/head.o
-clean-files := $(obj)/bootlogo.rh $(obj)/head.o $(head-y)
+clean-files := $(obj)/head.o $(head-y)
diff --git a/arch/m68k/platform/68328/bootlogo.h b/arch/m68k/platform/68328/bootlogo.h
index 67bc2c1..b896c93 100644
--- a/arch/m68k/platform/68328/bootlogo.h
+++ b/arch/m68k/platform/68328/bootlogo.h
@@ -1,6 +1,6 @@
#define bootlogo_width 160
#define bootlogo_height 160
-static unsigned char bootlogo_bits[] = {
+unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x01, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x40, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
diff --git a/arch/m68k/platform/68328/bootlogo.pl b/arch/m68k/platform/68328/bootlogo.pl
deleted file mode 100644
index b04ae3f..0000000
--- a/arch/m68k/platform/68328/bootlogo.pl
+++ /dev/null
@@ -1,10 +0,0 @@
-
-$_ = join("", <>);
-
-s/(0x[0-9a-f]{2})/sprintf("0x%.2x",ord(pack("b8",unpack("B8",chr(hex($1))))))/gei;
-
-s/^ / .byte /gm;
-s/[,};]+$//gm;
-s/^static.*//gm;
-
-print $_;
diff --git a/arch/m68k/platform/68328/config.c b/arch/m68k/platform/68328/config.c
index a7bd21d..d70bf26 100644
--- a/arch/m68k/platform/68328/config.c
+++ b/arch/m68k/platform/68328/config.c
@@ -20,6 +20,9 @@
#include <asm/system.h>
#include <asm/machdep.h>
#include <asm/MC68328.h>
+#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD)
+#include "bootlogo.h"
+#endif
/***************************************************************************/
diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S
index aecff53..2ebfd64 100644
--- a/arch/m68k/platform/68328/head-pilot.S
+++ b/arch/m68k/platform/68328/head-pilot.S
@@ -24,19 +24,7 @@
.global _ramstart
.global _ramend
-.global penguin_bits
-
-#ifdef CONFIG_PILOT
-
-#define IMR 0xFFFFF304
-
- .data
- .align 16
-
-penguin_bits:
-#include "bootlogo.rh"
-
-#endif
+.global bootlogo_bits
/*****************************************************************************/
@@ -185,9 +173,6 @@
moveq #79, %d7
movel %d0, _ramend
- movel %a3, %d0
- movel %d0, rom_length
-
pea 0
pea env
pea %sp@(4)
@@ -196,7 +181,7 @@
DBG_PUTC('H')
#ifdef CONFIG_PILOT
- movel #penguin_bits, 0xFFFFFA00
+ movel #bootlogo_bits, 0xFFFFFA00
moveb #10, 0xFFFFFA05
movew #160, 0xFFFFFA08
movew #160, 0xFFFFFA0A
diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S
index 6ec77d3..a5ff96d 100644
--- a/arch/m68k/platform/68328/head-rom.S
+++ b/arch/m68k/platform/68328/head-rom.S
@@ -8,7 +8,7 @@
.global _ramend
#ifdef CONFIG_INIT_LCD
- .global splash_bits
+ .global bootlogo_bits
#endif
.data
@@ -29,16 +29,11 @@
#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-#ifdef CONFIG_INIT_LCD
-splash_bits:
-#include "bootlogo.rh"
-#endif
-
.text
_start:
_stext: movew #0x2700,%sr
#ifdef CONFIG_INIT_LCD
- movel #splash_bits, 0xfffffA00 /* LSSA */
+ movel #bootlogo_bits, 0xfffffA00 /* LSSA */
moveb #0x28, 0xfffffA05 /* LVPW */
movew #0x280, 0xFFFFFa08 /* LXMAX */
movew #0x1df, 0xFFFFFa0a /* LYMAX */
diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
index 309f725..f267886 100644
--- a/arch/m68k/platform/68328/timers.c
+++ b/arch/m68k/platform/68328/timers.c
@@ -93,7 +93,6 @@
.name = "timer",
.rating = 250,
.read = m68328_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -115,8 +114,7 @@
/* Enable timer 1 */
TCTL |= TCTL_TEN;
- m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
- clocksource_register(&m68328_clk);
+ clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
}
/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/dma_timer.c b/arch/m68k/platform/coldfire/dma_timer.c
index a5f5628..235ad57 100644
--- a/arch/m68k/platform/coldfire/dma_timer.c
+++ b/arch/m68k/platform/coldfire/dma_timer.c
@@ -44,7 +44,6 @@
.rating = 200,
.read = cf_dt_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -60,9 +59,7 @@
__raw_writeb(0x00, DTER0);
__raw_writel(0x00000000, DTRR0);
__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
- clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
- clocksource_cf_dt.shift);
- return clocksource_register(&clocksource_cf_dt);
+ return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
}
arch_initcall(init_cf_dt_clocksource);
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index 3157461..863889f 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -54,7 +54,6 @@
.globl ret_from_signal
.globl sys_call_table
.globl inthandler
-.globl fasthandler
enosys:
mov.l #sys_ni_syscall,%d3
@@ -63,6 +62,7 @@
ENTRY(system_call)
SAVE_ALL_SYS
move #0x2000,%sr /* enable intrs again */
+ GET_CURRENT(%d2)
cmpl #NR_syscalls,%d0
jcc enosys
@@ -166,6 +166,7 @@
*/
ENTRY(inthandler)
SAVE_ALL_INT
+ GET_CURRENT(%d2)
movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
andl #0x03fc,%d0 /* mask out vector only */
@@ -191,7 +192,9 @@
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
RDUSP /* movel %usp,%a3 */
movel %a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */
-
+#ifdef CONFIG_MMU
+ movel %a1,%a2 /* set new current */
+#endif
movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */
WRUSP /* movel %a3,%usp */
movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */
diff --git a/arch/m68k/platform/coldfire/gpio.c b/arch/m68k/platform/coldfire/gpio.c
index ff004579..292a1a5 100644
--- a/arch/m68k/platform/coldfire/gpio.c
+++ b/arch/m68k/platform/coldfire/gpio.c
@@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <asm/gpio.h>
#include <asm/pinmux.h>
@@ -115,13 +115,14 @@
mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
}
-struct sysdev_class mcf_gpio_sysclass = {
- .name = "gpio",
+struct bus_type mcf_gpio_subsys = {
+ .name = "gpio",
+ .dev_name = "gpio",
};
static int __init mcf_gpio_sysinit(void)
{
- return sysdev_class_register(&mcf_gpio_sysclass);
+ return subsys_system_register(&mcf_gpio_subsys, NULL);
}
core_initcall(mcf_gpio_sysinit);
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
index c334838..38f04a3 100644
--- a/arch/m68k/platform/coldfire/head.S
+++ b/arch/m68k/platform/coldfire/head.S
@@ -3,7 +3,7 @@
/*
* head.S -- common startup code for ColdFire CPUs.
*
- * (C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
+ * (C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
*/
/*****************************************************************************/
@@ -13,6 +13,7 @@
#include <asm/asm-offsets.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
+#include <asm/mcfmmu.h>
#include <asm/thread_info.h>
/*****************************************************************************/
@@ -135,6 +136,14 @@
__HEAD
+#ifdef CONFIG_MMU
+_start0:
+ jmp _start
+.global kernel_pg_dir
+.equ kernel_pg_dir,_start0
+.equ .,_start0+0x1000
+#endif
+
/*
* This is the codes first entry point. This is where it all
* begins...
@@ -143,6 +152,9 @@
_start:
nop /* filler */
movew #0x2700, %sr /* no interrupts */
+ movel #CACHE_INIT,%d0 /* disable cache */
+ movec %d0,%CACR
+ nop
#if defined(CONFIG_UBOOT)
movel %sp,_init_sp /* save initial stack pointer */
#endif
@@ -176,9 +188,6 @@
* it is very similar. Define the exact settings in the headers
* then the code here is the same for all.
*/
- movel #CACHE_INIT,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
movel #ACR0_MODE,%d0 /* set RAM region for caching */
movec %d0,%ACR0
movel #ACR1_MODE,%d0 /* anything else to cache? */
@@ -193,6 +202,26 @@
movec %d0,%CACR
nop
+#ifdef CONFIG_MMU
+ /*
+ * Identity mapping for the kernel region.
+ */
+ movel #(MMUBASE+1),%d0 /* enable MMUBAR registers */
+ movec %d0,%MMUBAR
+ movel #MMUOR_CA,%d0 /* clear TLB entries */
+ movel %d0,MMUOR
+ movel #0,%d0 /* set ASID to 0 */
+ movec %d0,%asid
+
+ movel #MMUCR_EN,%d0 /* Enable the identity map */
+ movel %d0,MMUCR
+ nop /* sync i-pipeline */
+
+ movel #_vstart,%a0 /* jump to "virtual" space */
+ jmp %a0@
+_vstart:
+#endif /* CONFIG_MMU */
+
#ifdef CONFIG_ROMFS_FS
/*
* Move ROM filesystem above bss :-)
@@ -238,6 +267,22 @@
lea init_thread_union,%a0
lea THREAD_SIZE(%a0),%sp
+#ifdef CONFIG_MMU
+.global m68k_cputype
+.global m68k_mmutype
+.global m68k_fputype
+.global m68k_machtype
+ movel #CPU_COLDFIRE,%d0
+ movel %d0,m68k_cputype /* Mark us as a ColdFire */
+ movel #MMU_COLDFIRE,%d0
+ movel %d0,m68k_mmutype
+ movel #FPU_COLDFIRE,%d0
+ movel %d0,m68k_fputype
+ movel #MACH_M54XX,%d0
+ movel %d0,m68k_machtype /* Mark us as a 54xx machine */
+ lea init_task,%a2 /* Set "current" init task */
+#endif
+
/*
* Assember start up done, start code proper.
*/
diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
index c2b9809..02663d2 100644
--- a/arch/m68k/platform/coldfire/pit.c
+++ b/arch/m68k/platform/coldfire/pit.c
@@ -144,7 +144,6 @@
.name = "pit",
.rating = 100,
.read = pit_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
};
@@ -162,8 +161,7 @@
setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
- pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
- clocksource_register(&pit_clk);
+ clocksource_register_hz(&pit_clk, FREQ);
}
/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
index 6a85daf..54e1452 100644
--- a/arch/m68k/platform/coldfire/sltimers.c
+++ b/arch/m68k/platform/coldfire/sltimers.c
@@ -98,23 +98,25 @@
static cycle_t mcfslt_read_clk(struct clocksource *cs)
{
unsigned long flags;
- u32 cycles;
- u16 scnt;
+ u32 cycles, scnt;
local_irq_save(flags);
scnt = __raw_readl(TA(MCFSLT_SCNT));
cycles = mcfslt_cnt;
+ if (__raw_readl(TA(MCFSLT_SSR)) & MCFSLT_SSR_TE) {
+ cycles += mcfslt_cycles_per_jiffy;
+ scnt = __raw_readl(TA(MCFSLT_SCNT));
+ }
local_irq_restore(flags);
/* subtract because slice timers count down */
- return cycles - scnt;
+ return cycles + ((mcfslt_cycles_per_jiffy - 1) - scnt);
}
static struct clocksource mcfslt_clk = {
.name = "slt",
.rating = 250,
.read = mcfslt_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -136,8 +138,7 @@
setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
- mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
- clocksource_register(&mcfslt_clk);
+ clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
#ifdef CONFIG_HIGHPROFILE
mcfslt_profile_init();
diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
index 60242f6..0d90da3 100644
--- a/arch/m68k/platform/coldfire/timers.c
+++ b/arch/m68k/platform/coldfire/timers.c
@@ -88,7 +88,6 @@
.name = "tmr",
.rating = 250,
.read = mcftmr_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -109,8 +108,7 @@
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
- mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
- clocksource_register(&mcftmr_clk);
+ clocksource_register_hz(&mcftmr_clk, FREQ);
setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h
deleted file mode 100644
index 20a8e25..0000000
--- a/arch/microblaze/include/asm/memblock.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
-#define _ASM_MICROBLAZE_MEMBLOCK_H
-
-#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
-
-
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index b73da2a..1a8ab6a 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -125,7 +125,6 @@
#define TIF_MEMDIE 6 /* is terminating due to OOM killer */
#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
#define TIF_SECCOMP 10 /* secure computing */
-#define TIF_FREEZE 14 /* Freezing for suspend */
/* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_POLLING_NRFLAG 16
@@ -137,7 +136,6 @@
#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
#define _TIF_IRET (1 << TIF_IRET)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 95cc295..7dcb5bf 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -103,10 +103,12 @@
if (!idle)
idle = default_idle;
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched())
idle();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 977484a..80d314e 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -122,7 +122,6 @@
of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
- memblock_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
@@ -130,7 +129,7 @@
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
- memblock_analyze();
+ memblock_allow_resize();
pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index bd8ccab..88a0163 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -19,50 +19,11 @@
static int handle; /* reset pin handle */
static unsigned int reset_val;
-static int of_reset_gpio_handle(void)
-{
- int ret; /* variable which stored handle reset gpio pin */
- struct device_node *root; /* root node */
- struct device_node *gpio; /* gpio node */
- struct gpio_chip *gc;
- u32 flags;
- const void *gpio_spec;
-
- /* find out root node */
- root = of_find_node_by_path("/");
-
- /* give me handle for gpio node to be possible allocate pin */
- ret = of_parse_phandles_with_args(root, "hard-reset-gpios",
- "#gpio-cells", 0, &gpio, &gpio_spec);
- if (ret) {
- pr_debug("%s: can't parse gpios property\n", __func__);
- goto err0;
- }
-
- gc = of_node_to_gpiochip(gpio);
- if (!gc) {
- pr_debug("%s: gpio controller %s isn't registered\n",
- root->full_name, gpio->full_name);
- ret = -ENODEV;
- goto err1;
- }
-
- ret = gc->of_xlate(gc, root, gpio_spec, &flags);
- if (ret < 0)
- goto err1;
-
- ret += gc->base;
-err1:
- of_node_put(gpio);
-err0:
- pr_debug("%s exited with status %d\n", __func__, ret);
- return ret;
-}
-
void of_platform_reset_gpio_probe(void)
{
int ret;
- handle = of_reset_gpio_handle();
+ handle = of_get_named_gpio(of_find_node_by_path("/"),
+ "hard-reset-gpios", 0);
if (!gpio_is_valid(handle)) {
printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n",
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d46f1da..a7636d3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -25,6 +25,9 @@
select GENERIC_IRQ_SHOW
select HAVE_ARCH_JUMP_LABEL
select IRQ_FORCED_THREADING
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
menu "Machine selection"
@@ -65,7 +68,6 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT_UART16550
select ARCH_REQUIRE_GPIOLIB
- select GCD
select VLYNQ
help
Support for the Texas Instruments AR7 System-on-a-Chip
@@ -2064,9 +2066,6 @@
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
config ARCH_SPARSEMEM_ENABLE
bool
select SPARSEMEM_STATIC
@@ -2369,10 +2368,6 @@
Linux driver support status is documented at:
<http://www.linux-mips.org/wiki/DECstation>
-#config ACCESSBUS
-# bool "Access.Bus support"
-# depends on TC
-
config MMU
bool
default y
diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h
index d08d7c6..c523123 100644
--- a/arch/mips/include/asm/ip32/mace.h
+++ b/arch/mips/include/asm/ip32/mace.h
@@ -95,7 +95,7 @@
* Ethernet interface
*/
struct mace_ethernet {
- volatile unsigned long mac_ctrl;
+ volatile u64 mac_ctrl;
volatile unsigned long int_stat;
volatile unsigned long dma_ctrl;
volatile unsigned long timer;
diff --git a/arch/mips/include/asm/ipcbuf.h b/arch/mips/include/asm/ipcbuf.h
index d47d08f..84c7e51 100644
--- a/arch/mips/include/asm/ipcbuf.h
+++ b/arch/mips/include/asm/ipcbuf.h
@@ -1,28 +1 @@
-#ifndef _ASM_IPCBUF_H
-#define _ASM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for alpha architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid_t uid;
- __kernel_gid_t gid;
- __kernel_uid_t cuid;
- __kernel_gid_t cgid;
- __kernel_mode_t mode;
- unsigned short seq;
- unsigned short __pad1;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index 9de5190..ad5c0a7 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -82,6 +82,9 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#ifdef __KERNEL__
/** sock_type - Socket types
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 97f8bf6..0d85d8e 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -117,7 +117,6 @@
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
-#define TIF_FREEZE 19
#define TIF_FIXADE 20 /* Fix address errors in software */
#define TIF_LOGADE 21 /* Log address errors to syslog */
#define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */
@@ -141,7 +140,6 @@
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_FIXADE (1<<TIF_FIXADE)
#define _TIF_LOGADE (1<<TIF_LOGADE)
#define _TIF_32BIT_REGS (1<<TIF_32BIT_REGS)
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
index 533812b..43bf70e 100644
--- a/arch/mips/include/asm/types.h
+++ b/arch/mips/include/asm/types.h
@@ -21,12 +21,6 @@
# include <asm-generic/int-ll64.h>
#endif
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 4f2971b..315fc0b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -623,7 +623,7 @@
if (!atomic_inc_not_zero(&active_events)) {
if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
atomic_dec(&active_events);
- return -ENOSPC;
+ return -EINVAL;
}
mutex_lock(&pmu_reserve_mutex);
@@ -732,15 +732,15 @@
memset(&fake_cpuc, 0, sizeof(fake_cpuc));
if (!validate_event(&fake_cpuc, leader))
- return -ENOSPC;
+ return -EINVAL;
list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
if (!validate_event(&fake_cpuc, sibling))
- return -ENOSPC;
+ return -EINVAL;
}
if (!validate_event(&fake_cpuc, event))
- return -ENOSPC;
+ return -EINVAL;
return 0;
}
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c47f96e..7955409 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -56,7 +56,8 @@
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched() && cpu_online(cpu)) {
#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
@@ -77,7 +78,8 @@
system_state == SYSTEM_BOOTING))
play_dead();
#endif
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 84af26a..b1cb8f8 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -14,6 +14,7 @@
#include <linux/ioport.h>
#include <linux/export.h>
#include <linux/screen_info.h>
+#include <linux/memblock.h>
#include <linux/bootmem.h>
#include <linux/initrd.h>
#include <linux/root_dev.h>
@@ -352,7 +353,7 @@
continue;
#endif
- add_active_range(0, start, end);
+ memblock_add_node(PFN_PHYS(start), PFN_PHYS(end - start), 0);
}
/*
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
index bc5e976..4b2ea28 100644
--- a/arch/mips/sgi-ip27/Kconfig
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -1,9 +1,3 @@
-#config SGI_SN0_XXL
-# bool "IP27 XXL"
-# depends on SGI_IP27
-# This options adds support for userspace processes up to 16TB size.
-# Normally the limit is just .5TB.
-
choice
prompt "Node addressing mode"
depends on SGI_IP27
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index bc12971..b105eca 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -12,6 +12,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/module.h>
@@ -381,8 +382,8 @@
continue;
}
num_physpages += slot_psize;
- add_active_range(node, slot_getbasepfn(node, slot),
- slot_getbasepfn(node, slot) + slot_psize);
+ memblock_add_node(PFN_PHYS(slot_getbasepfn(node, slot)),
+ PFN_PHYS(slot_psize), node);
}
}
}
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 3e639bd..3cd937e 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -71,7 +71,6 @@
bool
select DMA_COHERENT
select IRQ_CPU
- select SIBYTE_CFE
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c
index 7f8416f..8e93b21 100644
--- a/arch/mips/txx9/generic/7segled.c
+++ b/arch/mips/txx9/generic/7segled.c
@@ -9,7 +9,7 @@
* (C) Copyright TOSHIBA CORPORATION 2005-2007
* All Rights Reserved.
*/
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/slab.h>
#include <linux/map_to_7segment.h>
#include <asm/txx9/generic.h>
@@ -37,8 +37,8 @@
return 0;
}
-static ssize_t ascii_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t ascii_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
unsigned int ch = dev->id;
@@ -46,8 +46,8 @@
return size;
}
-static ssize_t raw_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t raw_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
unsigned int ch = dev->id;
@@ -55,19 +55,19 @@
return size;
}
-static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store);
-static SYSDEV_ATTR(raw, 0200, NULL, raw_store);
+static DEVICE_ATTR(ascii, 0200, NULL, ascii_store);
+static DEVICE_ATTR(raw, 0200, NULL, raw_store);
-static ssize_t map_seg7_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t map_seg7_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map));
return sizeof(txx9_seg7map);
}
-static ssize_t map_seg7_store(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t map_seg7_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
if (size != sizeof(txx9_seg7map))
@@ -76,10 +76,11 @@
return size;
}
-static SYSDEV_CLASS_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store);
+static DEVICE_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store);
-static struct sysdev_class tx_7segled_sysdev_class = {
- .name = "7segled",
+static struct bus_type tx_7segled_subsys = {
+ .name = "7segled",
+ .dev_name = "7segled",
};
static int __init tx_7segled_init_sysfs(void)
@@ -87,26 +88,25 @@
int error, i;
if (!tx_7segled_num)
return -ENODEV;
- error = sysdev_class_register(&tx_7segled_sysdev_class);
+ error = subsys_system_register(&tx_7segled_subsys, NULL);
if (error)
return error;
- error = sysdev_class_create_file(&tx_7segled_sysdev_class,
- &attr_map_seg7);
+ error = device_create_file(tx_7segled_subsys.dev_root, &dev_attr_map_seg7);
if (error)
return error;
for (i = 0; i < tx_7segled_num; i++) {
- struct sys_device *dev;
+ struct device *dev;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
error = -ENODEV;
break;
}
dev->id = i;
- dev->cls = &tx_7segled_sysdev_class;
- error = sysdev_register(dev);
+ dev->dev = &tx_7segled_subsys;
+ error = device_register(dev);
if (!error) {
- sysdev_create_file(dev, &attr_ascii);
- sysdev_create_file(dev, &attr_raw);
+ device_create_file(dev, &dev_attr_ascii);
+ device_create_file(dev, &dev_attr_raw);
}
}
return error;
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index ec38e00..ae77a79 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -22,7 +22,7 @@
#include <linux/serial_core.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <asm/bootinfo.h>
@@ -897,10 +897,13 @@
#endif
}
-static struct sysdev_class txx9_sramc_sysdev_class;
+static struct bus_type txx9_sramc_subsys = {
+ .name = "txx9_sram",
+ .dev_name = "txx9_sram",
+};
-struct txx9_sramc_sysdev {
- struct sys_device dev;
+struct txx9_sramc_dev {
+ struct device dev;
struct bin_attribute bindata_attr;
void __iomem *base;
};
@@ -909,7 +912,7 @@
struct bin_attribute *bin_attr,
char *buf, loff_t pos, size_t size)
{
- struct txx9_sramc_sysdev *dev = bin_attr->private;
+ struct txx9_sramc_dev *dev = bin_attr->private;
size_t ramsize = bin_attr->size;
if (pos >= ramsize)
@@ -924,7 +927,7 @@
struct bin_attribute *bin_attr,
char *buf, loff_t pos, size_t size)
{
- struct txx9_sramc_sysdev *dev = bin_attr->private;
+ struct txx9_sramc_dev *dev = bin_attr->private;
size_t ramsize = bin_attr->size;
if (pos >= ramsize)
@@ -937,18 +940,13 @@
void __init txx9_sramc_init(struct resource *r)
{
- struct txx9_sramc_sysdev *dev;
+ struct txx9_sramc_dev *dev;
size_t size;
int err;
- if (!txx9_sramc_sysdev_class.name) {
- txx9_sramc_sysdev_class.name = "txx9_sram";
- err = sysdev_class_register(&txx9_sramc_sysdev_class);
- if (err) {
- txx9_sramc_sysdev_class.name = NULL;
- return;
- }
- }
+ err = subsys_system_register(&txx9_sramc_subsys, NULL);
+ if (err)
+ return;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return;
@@ -956,7 +954,7 @@
dev->base = ioremap(r->start, size);
if (!dev->base)
goto exit;
- dev->dev.cls = &txx9_sramc_sysdev_class;
+ dev->dev.bus = &txx9_sramc_subsys;
sysfs_bin_attr_init(&dev->bindata_attr);
dev->bindata_attr.attr.name = "bindata";
dev->bindata_attr.attr.mode = S_IRUSR | S_IWUSR;
@@ -964,12 +962,12 @@
dev->bindata_attr.write = txx9_sram_write;
dev->bindata_attr.size = size;
dev->bindata_attr.private = dev;
- err = sysdev_register(&dev->dev);
+ err = device_register(&dev->dev);
if (err)
goto exit;
err = sysfs_create_bin_file(&dev->dev.kobj, &dev->bindata_attr);
if (err) {
- sysdev_unregister(&dev->dev);
+ device_unregister(&dev->dev);
goto exit;
}
return;
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index ba3cec3..6567895 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -15,7 +15,7 @@
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/notifier.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/ethtool.h>
#include <linux/param.h>
#include <linux/ptrace.h>
diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/asm/ipcbuf.h
index f6f63d4..84c7e51 100644
--- a/arch/mn10300/include/asm/ipcbuf.h
+++ b/arch/mn10300/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef _ASM_IPCBUF_H
-#define _ASM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for MN10300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index 4e60c42..876356d 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -62,4 +62,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 87c2130..28cf521 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -165,7 +165,6 @@
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 17 /* is terminating due to OOM killer */
-#define TIF_FREEZE 18 /* freezing for suspend */
#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME)
@@ -174,7 +173,6 @@
#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP)
#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK)
#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE +(1 << TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h
index c1833eb..713d4ba 100644
--- a/arch/mn10300/include/asm/types.h
+++ b/arch/mn10300/include/asm/types.h
@@ -13,12 +13,6 @@
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/openrisc/include/asm/memblock.h b/arch/openrisc/include/asm/memblock.h
deleted file mode 100644
index bbe5a1c..0000000
--- a/arch/openrisc/include/asm/memblock.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others. All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_OPENRISC_MEMBLOCK_H
-#define __ASM_OPENRISC_MEMBLOCK_H
-
-/* empty */
-
-#endif /* __ASM_OPENRISC_MEMBLOCK_H */
diff --git a/arch/openrisc/kernel/idle.c b/arch/openrisc/kernel/idle.c
index d5bc5f8..e5fc7887 100644
--- a/arch/openrisc/kernel/idle.c
+++ b/arch/openrisc/kernel/idle.c
@@ -51,7 +51,8 @@
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched()) {
check_pgt_cache();
@@ -69,7 +70,8 @@
set_thread_flag(TIF_POLLING_NRFLAG);
}
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index 1bb58ba..3d4478f 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -76,14 +76,13 @@
of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
- memblock_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
/* Save command line for /proc/cmdline and then parse parameters */
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
- memblock_analyze();
+ memblock_allow_resize();
/* We must copy the flattend device tree from init memory to regular
* memory because the device tree references the strings in it
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 6ab9580..d9dc6cd 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -136,16 +136,9 @@
*/
static int hpux_ustat(dev_t dev, struct hpux_ustat __user *ubuf)
{
- struct super_block *s;
struct hpux_ustat tmp; /* Changed to hpux_ustat */
struct kstatfs sbuf;
- int err = -EINVAL;
-
- s = user_get_super(dev);
- if (s == NULL)
- goto out;
- err = statfs_by_dentry(s->s_root, &sbuf);
- drop_super(s);
+ int err = vfs_ustat(dev, &sbuf);
if (err)
goto out;
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index 225b7d6..d28c51b 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -61,6 +61,9 @@
#define SO_RXQ_OVFL 0x4021
+#define SO_WIFI_STATUS 0x4022
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
/* O_NONBLOCK clashes with the bits used for socket types. Therefore we
* have to define SOCK_NONBLOCK to a different value here.
*/
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index aa8de72..6d9c7c7 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -58,7 +58,6 @@
#define TIF_32BIT 4 /* 32 bit binary */
#define TIF_MEMDIE 5 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */
-#define TIF_FREEZE 7 /* is freezing for suspend */
#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
#define TIF_SINGLESTEP 9 /* single stepping? */
#define TIF_BLOCKSTEP 10 /* branch stepping? */
@@ -69,7 +68,6 @@
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_32BIT (1 << TIF_32BIT)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
#define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP)
diff --git a/arch/parisc/include/asm/types.h b/arch/parisc/include/asm/types.h
index 80e415c..8866f9b 100644
--- a/arch/parisc/include/asm/types.h
+++ b/arch/parisc/include/asm/types.h
@@ -3,10 +3,4 @@
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
#endif
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 45b7389..7c07743 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -198,8 +198,6 @@
.rating = 300,
.read = read_cr16,
.mask = CLOCKSOURCE_MASK(BITS_PER_LONG),
- .mult = 0, /* to be set */
- .shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -270,7 +268,5 @@
/* register at clocksource framework */
current_cr16_khz = PAGE0->mem_10msec/10; /* kHz */
- clocksource_cr16.mult = clocksource_khz2mult(current_cr16_khz,
- clocksource_cr16.shift);
- clocksource_register(&clocksource_cr16);
+ clocksource_register_khz(&clocksource_cr16, current_cr16_khz);
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 951e18f..692ac75 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -87,6 +87,10 @@
bool
default y if 64BIT
+config ARCH_HAS_CPU_IDLE_WAIT
+ bool
+ default y
+
config GENERIC_HWEIGHT
bool
default y
@@ -117,6 +121,7 @@
select HAVE_KRETPROBES
select HAVE_ARCH_TRACEHOOK
select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select USE_GENERIC_SMP_HELPERS if SMP
@@ -132,6 +137,7 @@
select IRQ_PER_CPU
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
+ select IRQ_FORCED_THREADING
select HAVE_RCU_TABLE_FREE if SMP
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_BPF_JIT if (PPC64 && NET)
@@ -362,8 +368,9 @@
config CRASH_DUMP
bool "Build a kdump crash kernel"
- depends on PPC64 || 6xx || FSL_BOOKE
- select RELOCATABLE if PPC64 || FSL_BOOKE
+ depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x)
+ select RELOCATABLE if PPC64 || 44x
+ select DYNAMIC_MEMSTART if FSL_BOOKE
help
Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump
@@ -421,9 +428,6 @@
def_bool y
depends on (SMP && PPC_PSERIES) || PPC_PS3
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
config SYS_SUPPORTS_HUGETLBFS
bool
@@ -687,6 +691,10 @@
controller. Also contains some common code used by
drivers for specific local bus peripherals.
+config FSL_IFC
+ bool
+ depends on FSL_SOC
+
config FSL_GTM
bool
depends on PPC_83xx || QUICC_ENGINE || CPM2
@@ -772,6 +780,10 @@
endmenu
+config NONSTATIC_KERNEL
+ bool
+ default n
+
menu "Advanced setup"
depends on PPC32
@@ -821,13 +833,32 @@
int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
default 3
+config DYNAMIC_MEMSTART
+ bool "Enable page aligned dynamic load address for kernel (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
+ select NONSTATIC_KERNEL
+ help
+ This option enables the kernel to be loaded at any page aligned
+ physical address. The kernel creates a mapping from KERNELBASE to
+ the address where the kernel is loaded. The page size here implies
+ the TLB page size of the mapping for kernel on the particular platform.
+ Please refer to the init code for finding the TLB page size.
+
+ DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
+ kernel image, where the only restriction is the page aligned kernel
+ load address. When this option is enabled, the compile time physical
+ address CONFIG_PHYSICAL_START is ignored.
+
+ This option is overridden by CONFIG_RELOCATABLE
+
config RELOCATABLE
bool "Build a relocatable kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x)
+ depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && 44x
+ select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running at the
- location the kernel is loaded at (some alignment restrictions may
- exist).
+ location the kernel is loaded at, without any alignment restrictions.
+ This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
One use is for the kexec on panic case where the recovery kernel
must live at a different physical address than the primary
@@ -837,7 +868,11 @@
it has been loaded at and the compile time physical addresses
CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
setting can still be useful to bootwrappers that need to know the
- load location of the kernel (eg. u-boot/mkimage).
+ load address of the kernel (eg. u-boot/mkimage).
+
+config RELOCATABLE_PPC32
+ def_bool y
+ depends on PPC32 && RELOCATABLE
config PAGE_OFFSET_BOOL
bool "Set custom page offset address"
@@ -867,7 +902,7 @@
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
default PAGE_OFFSET if PAGE_OFFSET_BOOL
- default "0xc2000000" if CRASH_DUMP && !RELOCATABLE
+ default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
default "0xc0000000"
config PHYSICAL_START_BOOL
@@ -880,7 +915,7 @@
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
- default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE
+ default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL
default "0x00000000"
config PHYSICAL_ALIGN
@@ -926,6 +961,7 @@
if PPC64
config RELOCATABLE
bool "Build a relocatable kernel"
+ select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running anywhere
in the RMA (real memory area) at any 16k-aligned base address.
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 1b8a9c9..4ccb2a0 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -336,4 +336,16 @@
platform probing is done, all platforms selected must
share the same address.
+config STRICT_DEVMEM
+ def_bool y
+ prompt "Filter access to /dev/mem"
+ help
+ This option restricts access to /dev/mem. If this option is
+ disabled, you allow userspace access to all memory, including
+ kernel and userspace memory. Accidental memory access is likely
+ to be disastrous.
+ Memory access is required for experts who want to debug the kernel.
+
+ If you are unsure, say Y.
+
endmenu
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 70ba0c0..b8b105c 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -63,9 +63,9 @@
override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
endif
-LDFLAGS_vmlinux-yy := -Bstatic
-LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie
-LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-yy)
+LDFLAGS_vmlinux-y := -Bstatic
+LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
+LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y)
CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
@@ -131,8 +131,7 @@
endif
cpu-as-$(CONFIG_4xx) += -Wa,-m405
-cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
-cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
+cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
cpu-as-$(CONFIG_E500) += -Wa,-me500
cpu-as-$(CONFIG_E200) += -Wa,-me200
@@ -166,7 +165,7 @@
# With make 3.82 we cannot mix normal and wildcard targets
BOOT_TARGETS1 := zImage zImage.initrd uImage
-BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
+BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 72ee8c1..15986e7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -45,6 +45,7 @@
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
@@ -79,7 +80,8 @@
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
- gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
+ gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
+ treeboot-currituck.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -199,6 +201,7 @@
image-$(CONFIG_HOTFOOT) += cuImage.hotfoot
image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_ACADIA) += cuImage.acadia
+image-$(CONFIG_OBS600) += uImage.obs600
# Board ports in arch/powerpc/platform/44x/Kconfig
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
@@ -212,6 +215,7 @@
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
treeImage.iss4xx-mpic
+image-$(CONFIG_CURRITUCK) += treeImage.currituck
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
@@ -316,6 +320,12 @@
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
+$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
+
$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index 645a7c9..cc73f7a 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -9,6 +9,12 @@
})
#define mtdcr(rn, val) \
asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val))
+#define mfdcrx(rn) \
+ ({ \
+ unsigned long rval; \
+ asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
+ rval; \
+ })
/* 440GP/440GX SDRAM controller DCRs */
#define DCRN_SDRAM0_CFGADDR 0x010
diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S
index d271ab5..bbcb8a4 100644
--- a/arch/powerpc/boot/div64.S
+++ b/arch/powerpc/boot/div64.S
@@ -57,3 +57,55 @@
stw r8,4(r3)
mr r3,r6 # return the remainder in r3
blr
+
+/*
+ * Extended precision shifts.
+ *
+ * Updated to be valid for shift counts from 0 to 63 inclusive.
+ * -- Gabriel
+ *
+ * R3/R4 has 64 bit value
+ * R5 has shift count
+ * result in R3/R4
+ *
+ * ashrdi3: arithmetic right shift (sign propagation)
+ * lshrdi3: logical right shift
+ * ashldi3: left shift
+ */
+ .globl __ashrdi3
+__ashrdi3:
+ subfic r6,r5,32
+ srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
+ addi r7,r5,32 # could be xori, or addi with -32
+ slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
+ rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0
+ sraw r7,r3,r7 # t2 = MSW >> (count-32)
+ or r4,r4,r6 # LSW |= t1
+ slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2
+ sraw r3,r3,r5 # MSW = MSW >> count
+ or r4,r4,r7 # LSW |= t2
+ blr
+
+ .globl __ashldi3
+__ashldi3:
+ subfic r6,r5,32
+ slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count
+ addi r7,r5,32 # could be xori, or addi with -32
+ srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count)
+ slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32)
+ or r3,r3,r6 # MSW |= t1
+ slw r4,r4,r5 # LSW = LSW << count
+ or r3,r3,r7 # MSW |= t2
+ blr
+
+ .globl __lshrdi3
+__lshrdi3:
+ subfic r6,r5,32
+ srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
+ addi r7,r5,32 # could be xori, or addi with -32
+ slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
+ srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32)
+ or r4,r4,r6 # LSW |= t1
+ srw r3,r3,r5 # MSW = MSW >> count
+ or r4,r4,r7 # LSW |= t2
+ blr
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 261d10c..227290d 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -256,7 +256,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <400000000>;
interrupts = <9 0x8>;
@@ -266,7 +266,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <400000000>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts
new file mode 100644
index 0000000..b801dd0
--- /dev/null
+++ b/arch/powerpc/boot/dts/currituck.dts
@@ -0,0 +1,237 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000; // spin table
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "ibm,currituck";
+ compatible = "ibm,currituck";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <0>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <1>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x01f00000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00040000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ };
+
+ plb {
+ compatible = "ibm,plb6";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-frequency = <200000000>; // 200Mhz
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full
+ * 32-bit range
+ */
+ ranges = <0x00000000 0x00000200 0x00000000 0x80000000
+ 0x80000000 0x00000200 0x80000000 0x80000000>;
+ clock-frequency = <100000000>;
+
+ UART0: serial@10000000 {
+ device_type = "serial";
+ compatible = "ns16750", "ns16550";
+ reg = <0x10000000 0x00000008>;
+ virtual-reg = <0xe1000000>;
+ clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
+ current-speed = <115200>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <34 2>;
+ };
+
+ IIC0: i2c@00000000 {
+ compatible = "ibm,iic-currituck", "ibm,iic";
+ reg = <0x0 0x00000014>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <79 2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80", "m41st85";
+ reg = <0x68>;
+ };
+ };
+ };
+
+ PCIE0: pciex@10100000000 { // 4xGBIF1
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x80 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
+ };
+
+ PCIE1: pciex@30100000000 { // 4xGBIF0
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x60 0x20>;
+
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
+ };
+
+ PCIE2: pciex@38100000000 { // 2xGBIF0
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x2>; /* port number */
+ reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0xA0 0x20>;
+
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
+ };
+
+ };
+
+ chosen {
+ linux,stdout-path = &UART0;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
new file mode 100644
index 0000000..89af626
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -0,0 +1,248 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8536-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8536-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ /* mark compat w/8572 to get some erratum treatment */
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2 0 0>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8536-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ usb@22000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+ };
+
+ usb@23000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <46 0x2 0 0>;
+ };
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+ usb@2b000 {
+ compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+ reg = <0x2b000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <60 0x2 0 0>;
+ };
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8536-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
new file mode 100644
index 0000000..7de45a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8536";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8536@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
new file mode 100644
index 0000000..b68eb11
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
@@ -0,0 +1,191 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8544-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8544-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8544-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8544-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
new file mode 100644
index 0000000..8777f92
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8544";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8544@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
new file mode 100644
index 0000000..9d8023a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
@@ -0,0 +1,143 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <25 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8548-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8548-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8548-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
new file mode 100644
index 0000000..289f121
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -0,0 +1,62 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8548";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
new file mode 100644
index 0000000..64e7075
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
@@ -0,0 +1,270 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+ sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ sleep = <&pmc 0x80000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+ sleep = <&pmc 0x20000000>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ sleep = <&pmc 0x00080000>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8568-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8568-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ i2c-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+ };
+
+ duart-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8568-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+ dma@21300 {
+ sleep = <&pmc 0x00000400>;
+ };
+
+/include/ "pq3-etsec1-0.dtsi"
+ ethernet@24000 {
+ sleep = <&pmc 0x00000080>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+ ethernet@25000 {
+ sleep = <&pmc 0x00000040>;
+ };
+
+ par_io@e0100 {
+ reg = <0xe0100 0x100>;
+ device_type = "par_io";
+ };
+
+/include/ "pq3-sec2.1-0.dtsi"
+ crypto@30000 {
+ sleep = <&pmc 0x01000000>;
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+ rmu@d3000 {
+ sleep = <&pmc 0x00040000>;
+ };
+
+ global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
+ fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8568-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ sleep = <&pmc 0x00000800>;
+ brg-frequency = <0>;
+ bus-frequency = <396000000>;
+ fsl,qe-num-riscs = <2>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@4c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,spi";
+ reg = <0x4c0 0x40>;
+ cell-index = <0>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ };
+
+ spi@500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3000 {
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x10000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x10000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
new file mode 100644
index 0000000..eacd62c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
@@ -0,0 +1,65 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8568";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8568@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
new file mode 100644
index 0000000..3e6346a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
@@ -0,0 +1,304 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+ sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+ sleep = <&pmc 0x20000000>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ sleep = <&pmc 0x00080000>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8569-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8569-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ i2c-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+ };
+
+ duart-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8569-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ sleep = <&pmc 0x00200000>;
+ };
+
+ par_io@e0100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe0100 0x100>;
+ ranges = <0x0 0xe0100 0x100>;
+ device_type = "par_io";
+ };
+
+/include/ "pq3-sec3.1-0.dtsi"
+ crypto@30000 {
+ sleep = <&pmc 0x01000000>;
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+ rmu@d3000 {
+ sleep = <&pmc 0x00040000>;
+ };
+
+ global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
+ fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8569-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ sleep = <&pmc 0x00000800>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ fsl,qe-num-riscs = <4>;
+ fsl,qe-num-snums = <46>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+ interrupt-parent = <&mpic>;
+ };
+
+ timer@440 {
+ compatible = "fsl,mpc8569-qe-gtm",
+ "fsl,qe-gtm", "fsl,gtm";
+ reg = <0x440 0x40>;
+ interrupts = <12 13 14 15>;
+ interrupt-parent = <&qeic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ spi@4c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+ reg = <0x4c0 0x40>;
+ cell-index = <0>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ };
+
+ spi@500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ };
+
+ usb@6c0 {
+ compatible = "fsl,mpc8569-qe-usb",
+ "fsl,mpc8323-qe-usb";
+ reg = <0x6c0 0x40 0x8b00 0x100>;
+ interrupts = <11>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3000 {
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3200 {
+ cell-index = <4>;
+ reg = <0x3200 0x200>;
+ interrupts = <35>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3400 {
+ cell-index = <6>;
+ reg = <0x3400 0x200>;
+ interrupts = <41>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3600 {
+ cell-index = <8>;
+ reg = <0x3600 0x200>;
+ interrupts = <43>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x20000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x20000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
new file mode 100644
index 0000000..b07064d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8569";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8569@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
new file mode 100644
index 0000000..d44e25a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -0,0 +1,196 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8572-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x100000>; // L2,1M
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
new file mode 100644
index 0000000..ca18832
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
@@ -0,0 +1,70 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8572";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
new file mode 100644
index 0000000..bd9e163
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -0,0 +1,198 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <16 2 0 0 19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1010-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1010-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1010-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ can0: can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2 0 0>;
+ };
+
+ can1: can@1d000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1d000 0x1000>;
+ interrupts = <61 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1010-l2-cache-controller",
+ "fsl,p1014-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-sec4.4-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: ethernet@b2000 {
+ queue-group@b2000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1010-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
new file mode 100644
index 0000000..7354a8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1010";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ can0 = &can0;
+ can1 = &can1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1010@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 0000000..fc924c5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,174 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet@b2000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 0000000..6f0376e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
new file mode 100644
index 0000000..38ba54d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -0,0 +1,225 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1021-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1021-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1021-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1021-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet@b2000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1021-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ compatible = "fsl,ucc-mdio";
+ };
+
+ ucc@2400 {
+ cell-index = <5>;
+ reg = <0x2400 0x200>;
+ interrupts = <40>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
new file mode 100644
index 0000000..4abd54b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1021";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1021@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1021@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 0000000..16239b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,235 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1022-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1022-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1022-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+ dma@c300 {
+ dma00: dma-channel@0 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ dma01: dma-channel@80 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ display@10000 {
+ compatible = "fsl,diu", "fsl,p1022-diu";
+ reg = <0x10000 1000>;
+ interrupts = <64 2 0 0>;
+ };
+
+ ssi@15000 {
+ compatible = "fsl,mpc8610-ssi";
+ cell-index = <0>;
+ reg = <0x15000 0x100>;
+ interrupts = <75 2 0 0>;
+ fsl,playback-dma = <&dma00>;
+ fsl,capture-dma = <&dma01>;
+ fsl,fifo-depth = <15>;
+ };
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1022-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1022-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ power@e0070{
+ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+ reg = <0xe0070 0x20>;
+ };
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
new file mode 100644
index 0000000..e930f4f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1022";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1022@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1022@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
new file mode 100644
index 0000000..b06bb4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -0,0 +1,224 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1023-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1023-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1023-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1023-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+ crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000 0x10000>;
+ ranges = <0 0x30000 0x10000>;
+ interrupts = <58 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <57 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <57 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1023-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
new file mode 100644
index 0000000..ac45f6d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
@@ -0,0 +1,76 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1023";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1023@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1023@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
new file mode 100644
index 0000000..c041050
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
@@ -0,0 +1,194 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x8000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
+ };
+
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
new file mode 100644
index 0000000..3213288
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
@@ -0,0 +1,69 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
new file mode 100644
index 0000000..234a399
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -0,0 +1,325 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p2041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
new file mode 100644
index 0000000..2d0a40d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -0,0 +1,111 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
new file mode 100644
index 0000000..d41d08d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -0,0 +1,352 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
new file mode 100644
index 0000000..136def3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -0,0 +1,112 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
new file mode 100644
index 0000000..a63edd1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
@@ -0,0 +1,296 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3060-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3060-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.1-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
new file mode 100644
index 0000000..00c8e70
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
@@ -0,0 +1,125 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3060";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
new file mode 100644
index 0000000..8d35d2c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -0,0 +1,350 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p4080-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ voltage-ranges = <3300 3300>;
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
new file mode 100644
index 0000000..b9556ee
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -0,0 +1,143 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P4080";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
new file mode 100644
index 0000000..914074b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -0,0 +1,355 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p5020-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
new file mode 100644
index 0000000..ae823a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -0,0 +1,96 @@
+/*
+ * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P5020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e5500@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e5500@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
new file mode 100644
index 0000000..b5b37ad
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <20 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <21 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <22 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <23 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
new file mode 100644
index 0000000..28cb8a5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <79 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
new file mode 100644
index 0000000..5e268fd
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
+
+serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
new file mode 100644
index 0000000..5743433
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc@2e000 {
+ compatible = "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2 0 0>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
new file mode 100644
index 0000000..75854b2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
new file mode 100644
index 0000000..a1979ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+};
+
+mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
new file mode 100644
index 0000000..4c4fdde
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+};
+
+mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
new file mode 100644
index 0000000..4b8ab43
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+};
+
+mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
new file mode 100644
index 0000000..40c9137
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
+};
+
+mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
new file mode 100644
index 0000000..efe2ca0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ptp_clock@24e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0x24e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
new file mode 100644
index 0000000..1382fec
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+};
+
+ethernet@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000 0x1000>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
new file mode 100644
index 0000000..221cd2e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb1000 0x1000>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
new file mode 100644
index 0000000..61456c3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -0,0 +1,59 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mdio@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x26000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb2000 0x1000>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
new file mode 100644
index 0000000..034ab8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet0_grp2 {
+ queue-group@b4000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb4000 0x1000>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
new file mode 100644
index 0000000..3be9ba3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet1_grp2 {
+ queue-group@b5000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb5000 0x1000>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
new file mode 100644
index 0000000..02a3345
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet2_grp2 {
+ queue-group@b6000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb6000 0x1000>;
+ interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
new file mode 100644
index 0000000..72a3ef5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,pq3-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2 0 0>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
new file mode 100644
index 0000000..d1dd6fb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
new file mode 100644
index 0000000..a9bd803
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
new file mode 100644
index 0000000..8734cff
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
new file mode 100644
index 0000000..5c80460
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic";
+ device_type = "open-pic";
+};
+
+timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
new file mode 100644
index 0000000..587ca9f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 0 0 /* msg1_tx_irq */
+ 54 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 0 0 /* msg2_tx_irq */
+ 56 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 0 0 /* bell_outb_irq */
+ 50 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
new file mode 100644
index 0000000..3c28dd0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@18000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
new file mode 100644
index 0000000..eefaf28
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@19000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
new file mode 100644
index 0000000..02a5c7a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
new file mode 100644
index 0000000..bba1ba4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
new file mode 100644
index 0000000..8f0a566
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
new file mode 100644
index 0000000..c227f27
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
new file mode 100644
index 0000000..bf957a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -0,0 +1,65 @@
+/*
+ * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec4.4", "fsl,sec4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000 0x10000>;
+ interrupts = <58 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
new file mode 100644
index 0000000..185ab9d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@22000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
new file mode 100644
index 0000000..fe24cd6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <46 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
new file mode 100644
index 0000000..1aebf3e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <31 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
new file mode 100644
index 0000000..ecf5e18
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <35 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
new file mode 100644
index 0000000..225c07b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+};
+
+serial1: serial@11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
new file mode 100644
index 0000000..d23233a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial2: serial@11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+};
+
+serial3: serial@11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
new file mode 100644
index 0000000..20835ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc: sdhc@114000 {
+ compatible = "fsl,esdhc";
+ reg = <0x114000 0x1000>;
+ interrupts = <48 2 0 0>;
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
new file mode 100644
index 0000000..6db0697
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@110000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
new file mode 100644
index 0000000..cf714f5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio0: gpio@130000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
new file mode 100644
index 0000000..5f9bf7d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+};
+
+i2c@118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
new file mode 100644
index 0000000..7989bf5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+};
+
+i2c@119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
new file mode 100644
index 0000000..b9bada6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic", "chrp,open-pic";
+ device_type = "open-pic";
+ clock-frequency = <0x0>;
+};
+
+timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+msi0: msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
+
+msi1: msi@41800 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41800 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe8 0 0 0
+ 0xe9 0 0 0
+ 0xea 0 0 0
+ 0xeb 0 0 0
+ 0xec 0 0 0
+ 0xed 0 0 0
+ 0xee 0 0 0
+ 0xef 0 0 0>;
+};
+
+msi2: msi@41a00 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41a00 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xf0 0 0 0
+ 0xf1 0 0 0
+ 0xf2 0 0 0
+ 0xf3 0 0 0
+ 0xf4 0 0 0
+ 0xf5 0 0 0
+ 0xf6 0 0 0
+ 0xf7 0 0 0>;
+};
+
+timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
new file mode 100644
index 0000000..ca7fec7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <16 2 1 11>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
new file mode 100644
index 0000000..b642047
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@220000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x220000 0x1000>;
+ interrupts = <68 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
new file mode 100644
index 0000000..c573702
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@221000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x221000 0x1000>;
+ interrupts = <69 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
new file mode 100644
index 0000000..0cbbac3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
@@ -0,0 +1,100 @@
+/*
+ * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
new file mode 100644
index 0000000..3308986
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.1-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
new file mode 100644
index 0000000..7990e0d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
new file mode 100644
index 0000000..4dd6f84
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@211000 {
+ compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <45 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
new file mode 100644
index 0000000..f053835
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+ compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 2266bbb..38dcb96 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -339,7 +339,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x2a 0x2>;
@@ -349,7 +349,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 429e87d..5ab8932 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -337,7 +337,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x2a 0x2>;
@@ -347,7 +347,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index d81201a..d5341f5 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -337,7 +337,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x2a 0x2>;
@@ -347,7 +347,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts
new file mode 100644
index 0000000..8c94290
--- /dev/null
+++ b/arch/powerpc/boot/dts/klondike.dts
@@ -0,0 +1,227 @@
+/*
+ * Device Tree for Klondike (APM8018X) board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tanmay Inamdar <tinamdar@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "apm,klondike";
+ compatible = "apm,klondike";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,apm8018x";
+ reg = <0x00000000>;
+ clock-frequency = <300000000>; /* Filled in by U-Boot */
+ timebase-frequency = <300000000>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x010>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x010>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x010>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x010>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ plb {
+ compatible = "ibm,plb4";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-apm8018x";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <2>;
+ num-rx-chans = <16>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = </*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x1 0x4
+ /*TXDE*/ 0x2 0x4
+ /*RXDE*/ 0x3 0x4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x20000000 0x20000000 0x30000000
+ 0x50000000 0x50000000 0x10000000
+ 0x60000000 0x60000000 0x10000000
+ 0xFE000000 0xFE000000 0x00010000>;
+ dcr-reg = <0x100 0x020>;
+ clock-frequency = <300000000>; /* Filled in by U-Boot */
+
+ RGMII0: emac-rgmii@400a2000 {
+ compatible = "ibm,rgmii";
+ reg = <0x400a2000 0x00000010>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@400a3000 {
+ compatible = "ibm,tah";
+ reg = <0x400a3000 0x100>;
+ };
+
+ TAH1: emac-tah@400a4000 {
+ compatible = "ibm,tah";
+ reg = <0x400a4000 0x100>;
+ };
+
+ EMAC0: ethernet@400a0000 {
+ compatible = "ibm,emac4", "ibm-emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
+ reg = <0x400a0000 0x00000100>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0x0>;
+ mal-rx-channel = <0x0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-address = <0x2>;
+ turbo = "no";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@400a1000 {
+ compatible = "ibm,emac4", "ibm-emac4sync";
+ status = "disabled";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
+ reg = <0x400a1000 0x00000100>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-address = <0x3>;
+ turbo = "no";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@50001000";
+ };
+};
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index d16bae1..983aee1 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -80,7 +80,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 8d725d1..0a45451 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -84,7 +84,7 @@
serial0: serial@80004500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x80004500 0x8>;
clock-frequency = <97553800>;
current-speed = <9600>;
@@ -95,7 +95,7 @@
serial1: serial@80004600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x80004600 0x8>;
clock-frequency = <97553800>;
current-speed = <57600>;
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index b13a11e..0e758b3 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -84,7 +84,7 @@
serial0: serial@80004500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x80004500 0x8>;
clock-frequency = <130041000>;
current-speed = <9600>;
@@ -95,7 +95,7 @@
serial1: serial@80004600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x80004600 0x8>;
clock-frequency = <130041000>;
current-speed = <57600>;
diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
index 697b3f6..22b0832 100644
--- a/arch/powerpc/boot/dts/mpc8308_p1m.dts
+++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
@@ -233,7 +233,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
@@ -243,7 +243,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
index a0bd188..f66d10d 100644
--- a/arch/powerpc/boot/dts/mpc8308rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -208,7 +208,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
@@ -218,7 +218,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index ac1eb32..1c836c6 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -261,7 +261,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -271,7 +271,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 4dd08c3..811848e 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -265,7 +265,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
@@ -275,7 +275,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 05ad8c9..da9c72d 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -105,7 +105,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -115,7 +115,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index f4fadb23a..ff7b15b 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -83,7 +83,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -93,7 +93,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 505dc84..2608679 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -283,7 +283,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 0x8>;
@@ -293,7 +293,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>; // from bootloader
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index eb73211..6cd044d 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -189,7 +189,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 0x8>;
@@ -199,7 +199,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>; // from bootloader
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 230febb..4552864 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -242,7 +242,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -252,7 +252,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 45cfa1c5..c0e450a 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -136,7 +136,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
@@ -146,7 +146,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <264000000>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index bdf4459..b6e9aec 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -102,7 +102,7 @@
serial0: serial@4500 {
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
interrupts = <9 8>;
interrupt-parent = <&ipic>;
@@ -112,7 +112,7 @@
serial1: serial@4600 {
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
interrupts = <10 8>;
interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 855782c..cfccef57 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -276,7 +276,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -286,7 +286,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index dbc1b98..353deff 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -321,7 +321,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -331,7 +331,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
index 9ea7830..ef4a305 100644
--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -304,7 +304,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -314,7 +314,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index f70cf60..538fcb9 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -315,7 +315,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -325,7 +325,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 3447eb9..32333a9 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -321,7 +321,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -331,7 +331,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 645ec51..5387092 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -313,7 +313,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -323,7 +323,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 15560c6..46224c2 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -319,7 +319,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -329,7 +329,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index a75c10e..c158815 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -9,24 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
cpus {
#cpus = <1>;
@@ -45,403 +32,34 @@
reg = <0 0 0 0>; // Filled by U-Boot
};
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ };
+
+ board_soc: soc: soc@ffe00000 {
ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8536-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8536-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8536-l2-cache-controller";
- reg = <0x20000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0 0x1>;
- interrupt-parent = <&mpic>;
- };
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <4>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>;
- partition@u-boot {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@kernel {
- label = "kernel";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@dtb {
- label = "dtb";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@fs {
- label = "file system";
- reg = <0x00700000 0x00900000>;
- };
- };
- flash@1 {
- compatible = "spansion,s25sl12801";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
- flash@2 {
- compatible = "spansion,s25sl12801";
- reg = <2>;
- spi-max-frequency = <40000000>;
- };
- flash@3 {
- compatible = "spansion,s25sl12801";
- reg = <3>;
- spi-max-frequency = <40000000>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- phy_type = "ulpi";
- };
-
- usb@23000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- usb@2b000 {
- compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
- reg = <0x2b000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <60 0x2>;
- dr_mode = "peripheral";
- phy_type = "ulpi";
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <250000000>;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
};
pci0: pci@ffe08000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xffe08000 0 0x1000>;
+ ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+ 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0 0 1 &mpic 1 1
- 0x8800 0 0 2 &mpic 2 1
- 0x8800 0 0 3 &mpic 3 1
- 0x8800 0 0 4 &mpic 4 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 0x2>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
- 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
+ 0x8800 0 0 1 &mpic 1 1 0 0
+ 0x8800 0 0 2 &mpic 2 1 0 0
+ 0x8800 0 0 3 &mpic 3 1 0 0
+ 0x8800 0 0 4 &mpic 4 1 0 0>;
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0x98000000
0x02000000 0 0x98000000
0 0x08000000
@@ -453,31 +71,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0x90000000
0x02000000 0 0x90000000
0 0x08000000
@@ -489,32 +86,10 @@
};
pci3: pcie@ffe0b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0b000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
-
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xa0000000
0x02000000 0 0xa0000000
0 0x20000000
@@ -525,3 +100,6 @@
};
};
};
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
new file mode 100644
index 0000000..1462e4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -0,0 +1,141 @@
+/*
+ * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ i2c@3100 {
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0 0x1 0 0>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ flash@1 {
+ compatible = "spansion,s25sl12801";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@2 {
+ compatible = "spansion,s25sl12801";
+ reg = <2>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@3 {
+ compatible = "spansion,s25sl12801";
+ reg = <3>;
+ spi-max-frequency = <40000000>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 0x1 0 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 0x1 0 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ usb@2b000 {
+ dr_mode = "peripheral";
+ phy_type = "ulpi";
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index d95b260..8f4b929 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8536 DS Device Tree Source
+ * MPC8536DS Device Tree Source (36-bit address map)
*
* Copyright 2008-2009 Freescale Semiconductor, Inc.
*
@@ -9,24 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
cpus {
#cpus = <1>;
@@ -45,351 +32,34 @@
reg = <0 0 0 0>; // Filled by U-Boot
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8536-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8536-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8536-l2-cache-controller";
- reg = <0x20000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0 0x1>;
- interrupt-parent = <&mpic>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- phy_type = "ulpi";
- };
-
- usb@23000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- usb@2b000 {
- compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
- reg = <0x2b000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <60 0x2>;
- dr_mode = "peripheral";
- phy_type = "ulpi";
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <250000000>;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
};
- pci0: pci@fffe08000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pci@ffe08000 {
+ reg = <0xf 0xffe08000 0 0x1000>;
+ ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0 0 1 &mpic 1 1
- 0x8800 0 0 2 &mpic 2 1
- 0x8800 0 0 3 &mpic 3 1
- 0x8800 0 0 4 &mpic 4 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 0x2>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
- 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf 0xffe08000 0 0x1000>;
+ 0x8800 0 0 1 &mpic 1 1 0 0
+ 0x8800 0 0 2 &mpic 2 1 0 0
+ 0x8800 0 0 3 &mpic 3 1 0 0
+ 0x8800 0 0 4 &mpic 4 1 0 0>;
};
- pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ pci1: pcie@ffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xf8000000
0x02000000 0 0xf8000000
0 0x08000000
@@ -401,31 +71,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xf8000000
0x02000000 0 0xf8000000
0 0x08000000
@@ -437,32 +86,10 @@
};
pci3: pcie@fffe0b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
-
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
@@ -473,3 +100,6 @@
};
};
};
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 8d1bf0f..f99fb11 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -243,7 +243,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -253,7 +253,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 87ff965..0f5e939 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -209,7 +209,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -219,7 +219,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index d793968..e934987 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -9,339 +9,52 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8544si-pre.dtsi"
+
/ {
model = "MPC8544DS";
compatible = "MPC8544DS", "MPC85xxDS";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8544@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ reg = <0 0 0 0>; // Filled by U-Boot
};
- soc8544@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8544-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8544-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8544-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc8544@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
};
pci0: pci@e0008000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x12 J16 Slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
};
pci1: pcie@e0009000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0x0 0xe0009000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -353,31 +66,10 @@
};
pci2: pcie@e000a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -388,44 +80,11 @@
};
};
- pci3: pcie@e000b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000b000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
- 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
- interrupt-map = <
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ board_pci3: pci3: pcie@e000b000 {
+ reg = <0x0 0xe000b000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
+ 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xb0000000
0x2000000 0x0 0xb0000000
0x0 0x100000
@@ -433,70 +92,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
-
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xb0000000
- 0x2000000 0x0 0xb0000000
- 0x0 0x100000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0
- 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent = <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
};
};
+
+/*
+ * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
new file mode 100644
index 0000000..270f64b
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi
@@ -0,0 +1,161 @@
+/*
+ * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ enet0: ethernet@24000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci3 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index a17a557..07b8dae0 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -9,13 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
ethernet0 = &enet0;
@@ -29,76 +27,19 @@
pci2 = &pci2;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8548@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // 166 MHz
- clock-frequency = <0>; // 825 MHz, from uboot
- next-level-cache = <&L2>;
- };
- };
-
memory {
device_type = "memory";
- reg = <0x0 0x8000000>; // 128M at 0x0
+ reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
- soc8548@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8548-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8548-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8548-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ soc: soc8548@e0000000 {
+ ranges = <0 0x0 0xe0000000 0x100000>;
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
@@ -116,351 +57,178 @@
};
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <5 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <5 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities reg
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
pci0: pci@e0008000 {
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
- 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
- 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
- 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
- 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
- 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
- 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
- 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
- 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
@@ -492,7 +260,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <0 1>;
+ interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
@@ -505,56 +273,25 @@
};
pci1: pci@e0009000 {
+ reg = <0 0xe0009000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
- clock-frequency = <33333333>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
+ reg = <0 0xe000a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -565,3 +302,5 @@
};
};
};
+
+/include/ "fsl/mpc8548si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 5c5614f..fe10438 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -209,7 +209,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -219,7 +219,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 647daf8..09598bb 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -9,60 +9,25 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8568si-pre.dtsi"
/ {
model = "MPC8568EMDS";
compatible = "MPC8568EMDS", "MPC85xxMDS";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
- rapidio0 = &rio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8568@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- sleep = <&pmc 0x00008000 // core
- &pmc 0x00004000>; // timebase
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
+ rapidio0 = &rio;
};
memory {
device_type = "memory";
- reg = <0x0 0x10000000>;
+ reg = <0x0 0x0 0x0 0x0>;
};
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
- "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <19 2>;
-
+ lbc: localbus@e0005000 {
+ reg = <0x0 0xe0005000 0x0 0x1000>;
ranges = <0x0 0x0 0xfe000000 0x02000000
0x1 0x0 0xf8000000 0x00008000
0x2 0x0 0xf0000000 0x04000000
@@ -104,288 +69,65 @@
};
};
- soc8568@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8568-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8568-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8568-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ soc: soc8568@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
i2c-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000004>;
- ranges;
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
- interrupts = <3 1>;
- interrupt-parent = <&mpic>;
+ interrupts = <3 1 0 0>;
};
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- sleep = <&pmc 0x00000400>;
-
- dma-channel@0 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
};
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
- sleep = <&pmc 0x00000080>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@7 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x7>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@24520 {
+ phy0: ethernet-phy@7 {
+ interrupts = <1 1 0 0>;
+ reg = <0x7>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <1 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <2 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
sleep = <&pmc 0x00000040>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
- duart-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000002>;
- ranges;
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
- };
-
- global-utilities@e0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- ranges = <0 0xe0000 0x1000>;
- fsl,has-rstcr;
-
- pmc: power@70 {
- compatible = "fsl,mpc8568-pmc",
- "fsl,mpc8548-pmc";
- reg = <0x70 0x20>;
- };
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- sleep = <&pmc 0x01000000>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
par_io@e0100 {
- reg = <0xe0100 0x100>;
- device_type = "par_io";
num-ports = <7>;
pio1: ucc_pin@01 {
@@ -448,57 +190,21 @@
};
};
- qe@e0080000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
- ranges = <0x0 0xe0080000 0x40000>;
- reg = <0xe0080000 0x480>;
- sleep = <&pmc 0x00000800>;
- brg-frequency = <0>;
- bus-frequency = <396000000>;
- fsl,qe-num-riscs = <2>;
- fsl,qe-num-snums = <28>;
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x10000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x10000>;
- };
- };
+ qe: qe@e0080000 {
+ ranges = <0x0 0x0 0xe0080000 0x40000>;
+ reg = <0x0 0xe0080000 0x0 0x480>;
spi@4c0 {
- cell-index = <0>;
- compatible = "fsl,spi";
- reg = <0x4c0 0x40>;
- interrupts = <2>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
spi@500 {
- cell-index = <1>;
- compatible = "fsl,spi";
- reg = <0x500 0x40>;
- interrupts = <1>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
enet2: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
@@ -510,10 +216,6 @@
enet3: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <2>;
- reg = <0x3000 0x200>;
- interrupts = <33>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
@@ -532,102 +234,57 @@
* gianfar's MDIO bus */
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
-
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- big-endian;
- interrupts = <46 2 46 2>; //high:30 low:30
- interrupt-parent = <&mpic>;
- };
-
};
pci0: pci@e0008000 {
+ reg = <0x0 0xe0008000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
- 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
/* IDSEL 0x13 AD19 */
- 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
- 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
- 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
- sleep = <&pmc 0x80000000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
+ 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
+ 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
};
/* PCI Express */
pci1: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
- sleep = <&pmc 0x20000000>;
- clock-frequency = <33333333>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -638,22 +295,11 @@
};
};
- rio0: rapidio@e00c00000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
- reg = <0xe00c0000 0x20000>;
- ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
- interrupts = <48 2 /* error */
- 49 2 /* bell_outb */
- 50 2 /* bell_inb */
- 53 2 /* msg1_tx */
- 54 2 /* msg1_rx */
- 55 2 /* msg2_tx */
- 56 2 /* msg2_rx */>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00080000 /* controller */
- &pmc 0x00040000>; /* message unit */
+ rio: rapidio@e00c00000 {
+ reg = <0x0 0xe00c0000 0x0 0x20000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
};
leds {
@@ -672,3 +318,5 @@
};
};
};
+
+/include/ "fsl/mpc8568si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 8b72eaf..7e283c8 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -9,66 +9,36 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8569si-pre.dtsi"
/ {
model = "MPC8569EMDS";
compatible = "fsl,MPC8569EMDS";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet5 = &enet5;
ethernet7 = &enet7;
- pci1 = &pci1;
- rapidio0 = &rio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8569@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- sleep = <&pmc 0x00008000 // core
- &pmc 0x00004000>; // timebase
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
+ rapidio0 = &rio;
};
memory {
device_type = "memory";
};
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x08000000>;
+ lbc: localbus@e0005000 {
+ reg = <0x0 0xe0005000 0x0 0x1000>;
- ranges = <0x0 0x0 0xfe000000 0x02000000
- 0x1 0x0 0xf8000000 0x00008000
- 0x2 0x0 0xf0000000 0x04000000
- 0x3 0x0 0xfc000000 0x00008000
- 0x4 0x0 0xf8008000 0x00008000
- 0x5 0x0 0xf8010000 0x00008000>;
+ ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
+ 0x1 0x0 0x0 0xf8000000 0x00008000
+ 0x2 0x0 0x0 0xf0000000 0x04000000
+ 0x3 0x0 0x0 0xfc000000 0x00008000
+ 0x4 0x0 0x0 0xf8008000 0x00008000
+ 0x5 0x0 0x0 0xf8010000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
@@ -133,220 +103,25 @@
};
};
- soc@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,mpc8569-immr", "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8569-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8569-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
+ soc: soc@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
i2c-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000004>;
- ranges;
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
- interrupts = <3 1>;
- interrupt-parent = <&mpic>;
+ interrupts = <3 1 0 0>;
};
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
};
- duart-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000002>;
- ranges;
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8569-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x8>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00200000>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sdhc@2e000 {
status = "disabled";
sdhci,1-bit-only;
};
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- sleep = <&pmc 0x01000000>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- ranges = <0 0xe0000 0x1000>;
- fsl,has-rstcr;
-
- pmc: power@70 {
- compatible = "fsl,mpc8569-pmc",
- "fsl,mpc8548-pmc";
- reg = <0x70 0x20>;
- };
- };
-
par_io@e0100 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xe0100 0x100>;
- ranges = <0x0 0xe0100 0x100>;
- device_type = "par_io";
num-ports = <7>;
qe_pio_e: gpio-controller@80 {
@@ -447,47 +222,11 @@
};
};
- qe@e0080000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
- ranges = <0x0 0xe0080000 0x40000>;
- reg = <0xe0080000 0x480>;
- sleep = <&pmc 0x00000800>;
- brg-frequency = <0>;
- bus-frequency = <0>;
- fsl,qe-num-riscs = <4>;
- fsl,qe-num-snums = <46>;
-
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- interrupts = <46 2 46 2>; //high:30 low:30
- interrupt-parent = <&mpic>;
- };
-
- timer@440 {
- compatible = "fsl,mpc8569-qe-gtm",
- "fsl,qe-gtm", "fsl,gtm";
- reg = <0x440 0x40>;
- interrupts = <12 13 14 15>;
- interrupt-parent = <&qeic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
+ qe: qe@e0080000 {
+ ranges = <0x0 0x0 0xe0080000 0x40000>;
+ reg = <0x0 0xe0080000 0x0 0x480>;
spi@4c0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
- reg = <0x4c0 0x40>;
- cell-index = <0>;
- interrupts = <2>;
- interrupt-parent = <&qeic>;
gpios = <&qe_pio_e 30 0>;
mode = "cpu-qe";
@@ -499,20 +238,10 @@
};
spi@500 {
- cell-index = <1>;
- compatible = "fsl,spi";
- reg = <0x500 0x40>;
- interrupts = <1>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
usb@6c0 {
- compatible = "fsl,mpc8569-qe-usb",
- "fsl,mpc8323-qe-usb";
- reg = <0x6c0 0x40 0x8b00 0x100>;
- interrupts = <11>;
- interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk5";
fsl,lowspeed-clock = "brg10";
gpios = <&qe_pio_f 3 0 /* USBOE */
@@ -527,10 +256,6 @@
enet0: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk12";
@@ -548,35 +273,33 @@
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <4 1>;
+ interrupts = <4 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
qe_phy5: ethernet-phy@04 {
- interrupt-parent = <&mpic>;
reg = <0x04>;
device_type = "ethernet-phy";
};
qe_phy7: ethernet-phy@06 {
- interrupt-parent = <&mpic>;
reg = <0x6>;
device_type = "ethernet-phy";
};
@@ -610,10 +333,6 @@
enet2: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <3>;
- reg = <0x2200 0x200>;
- interrupts = <34>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk12";
@@ -637,10 +356,6 @@
enet1: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <2>;
- reg = <0x3000 0x200>;
- interrupts = <33>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
@@ -664,10 +379,6 @@
enet3: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <4>;
- reg = <0x3200 0x200>;
- interrupts = <35>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
@@ -691,10 +402,6 @@
enet5: ucc@3400 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <6>;
- reg = <0x3400 0x200>;
- interrupts = <41>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
@@ -706,10 +413,6 @@
enet7: ucc@3600 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <8>;
- reg = <0x3600 0x200>;
- interrupts = <43>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
@@ -717,50 +420,14 @@
phy-handle = <&qe_phy7>;
phy-connection-type = "sgmii";
};
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x20000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x20000>;
- };
- };
-
};
/* PCI Express */
pci1: pcie@e000a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
- sleep = <&pmc 0x20000000>;
- clock-frequency = <33333333>;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -771,20 +438,15 @@
};
};
- rio0: rapidio@e00c00000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
- reg = <0xe00c0000 0x20000>;
- ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
- interrupts = <48 2 /* error */
- 49 2 /* bell_outb */
- 50 2 /* bell_inb */
- 53 2 /* msg1_tx */
- 54 2 /* msg1_rx */
- 55 2 /* msg2_tx */
- 56 2 /* msg2_rx */>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00080000>;
+ rio: rapidio@e00c00000 {
+ reg = <0x0 0xe00c0000 0x0 0x20000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
+ port2 {
+ status = "disabled";
+ };
};
};
+
+/include/ "fsl/mpc8569si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index f6c04d2..0c9f295 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
@@ -78,601 +29,17 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@ffe00000 {
ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2 71 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xAAAAAAAB>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x3B9AC9FB>;
- fsl,max-adj = <499999999>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -680,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -784,31 +66,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -819,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi
new file mode 100644
index 0000000..c3d4fac
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi
@@ -0,0 +1,397 @@
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xAAAAAAAB>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x3B9AC9FB>;
+ fsl,max-adj = <499999999>;
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci0 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index f6365db..6c3d0b3 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8572 DS Device Tree Source
+ * MPC8572DS Device Tree Source (36-bit address map)
*
* Copyright 2007-2009 Freescale Semiconductor Inc.
*
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
@@ -78,588 +29,17 @@
0x4 0x0 0xf 0xffa40000 0x00040000
0x5 0x0 0xf 0xffa80000 0x00040000
0x6 0x0 0xf 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@fffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -667,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -771,31 +66,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -806,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 3375c2a..d34d127 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -14,494 +14,69 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- pci0 = &pci0;
- pci1 = &pci1;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
-
+ PowerPC,8572@1 {
+ status = "disabled";
+ };
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
+ serial@4600 {
+ status = "disabled";
};
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ dma@c300 {
+ status = "disabled";
};
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ gpio-controller@f000 {
};
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
+ l2-cache-controller@20000 {
cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
};
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ ethernet@26000 {
+ status = "disabled";
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ mdio@26520 {
+ status = "disabled";
};
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
+ ethernet@27000 {
+ status = "disabled";
};
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- };
+ mdio@27520 {
+ status = "disabled";
};
-
- enet1: ethernet@25000 {
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x80>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ pic@40000 {
protected-sources = <
31 32 33 37 38 39 /* enet2 enet3 */
76 77 78 79 26 42 /* dma2 pci2 serial*/
0xe4 0xe5 0xe6 0xe7 /* msi */
>;
};
- };
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe08000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
+ msi@41600 {
+ msi-available-ranges = <0 0x80>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0>;
};
-
- };
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe09000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
+ timer@42100 {
+ status = "disabled";
};
};
+ pcie@ffe0a000 {
+ status = "disabled";
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index e7b477f..d6a8faf 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -15,169 +15,74 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- pci2 = &pci2;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
+ PowerPC,8572@0 {
+ status = "disabled";
+ };
PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
+ ecm-law@0 {
+ status = "disabled";
};
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
+ ecm@1000 {
+ status = "disabled";
};
-
+ memory-controller@2000 {
+ status = "disabled";
+ };
+ memory-controller@6000 {
+ status = "disabled";
+ };
+ i2c@3000 {
+ status = "disabled";
+ };
+ i2c@3100 {
+ status = "disabled";
+ };
+ serial@4500 {
+ status = "disabled";
+ };
+ gpio-controller@f000 {
+ status = "disabled";
+ };
+ l2-cache-controller@20000 {
+ cache-size = <0x80000>; // L2, 512K
+ };
+ dma@21300 {
+ status = "disabled";
+ };
+ ethernet@24000 {
+ status = "disabled";
+ };
mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- reg = <0x3>;
- };
+ status = "disabled";
};
-
- enet2: ethernet@26000 {
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
+ ptp_clock@24e00 {
+ status = "disabled";
};
-
- enet3: ethernet@27000 {
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
+ ethernet@25000 {
+ status = "disabled";
};
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0x80 0x80>;
- interrupts = <
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ mdio@25520 {
+ status = "disabled";
};
-
- serial0: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ crypto@30000 {
+ status = "disabled";
};
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ pic@40000 {
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
@@ -189,41 +94,25 @@
0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe0a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
+ timer@41100 {
+ status = "disabled";
};
+ msi@41600 {
+ msi-available-ranges = <0x80 0x80>;
+ interrupts = <
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ };
+ global-utilities@e0000 {
+ status = "disabled";
+ };
+ };
+ pcie@ffe08000 {
+ status = "disabled";
+ };
+ pcie@ffe09000 {
+ status = "disabled";
};
};
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 83c3218..6a109a0 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -175,7 +175,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -186,7 +186,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 848320e..1e8666c 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,13 +26,6 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
-/*
- * Only one of Rapid IO or PCI can be present due to HW limitations and
- * due to the fact that the 2 now share address space in the new memory
- * map. The most likely case is that we have PCI, so comment out the
- * rapidio node. Leave it here for reference.
- */
- /* rapidio0 = &rapidio0; */
};
cpus {
@@ -335,7 +328,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -345,7 +338,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <28 2>;
@@ -361,6 +354,41 @@
device_type = "open-pic";
};
+ rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 /* msg1_tx_irq */
+ 54 2>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 /* msg2_tx_irq */
+ 56 2>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 /* bell_outb_irq */
+ 50 2>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2>;
+ };
+ };
+
global-utilities@e0000 {
compatible = "fsl,mpc8641-guts";
reg = <0xe0000 0x1000>;
@@ -612,16 +640,27 @@
};
};
/*
- rapidio0: rapidio@ffec0000 {
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map. The most likely case is that we have PCI, so comment out the
+ * rapidio node. Leave it here for reference.
+
+ rapidio@ffec0000 {
+ reg = <0xffec0000 0x11000>;
+ compatible = "fsl,srio";
+ interrupt-parent = <&mpic>;
+ interrupts = <48 2>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- reg = <0xffec0000 0x20000>;
- ranges = <0 0 0x80000000 0 0x20000000>;
- interrupt-parent = <&mpic>;
- // err_irq bell_outb_irq bell_inb_irq
- // msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq
- interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ ranges = <0 0 0x80000000 0 0x20000000>;
+ };
};
*/
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
index 8be8e70..fd4cd4d 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
@@ -328,7 +328,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -338,7 +338,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <28 2>;
diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts
new file mode 100644
index 0000000..18e7d79
--- /dev/null
+++ b/arch/powerpc/boot/dts/obs600.dts
@@ -0,0 +1,314 @@
+/*
+ * Device Tree Source for PlatHome OpenBlockS 600 (405EX)
+ *
+ * Copyright 2011 Ben Herrenschmidt, IBM Corp.
+ *
+ * Based on Kilauea by:
+ *
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "PlatHome,OpenBlockS 600";
+ compatible = "plathome,obs600";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,405EX";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic-405ex", "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-405ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-405ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ CPM0: cpm {
+ compatible = "ibm,cpm";
+ dcr-access-method = "native";
+ dcr-reg = <0x0b0 0x003>;
+ unused-units = <0x00000000>;
+ idle-doze = <0x02000000>;
+ standby = <0xe3e74800>;
+ };
+
+ plb {
+ compatible = "ibm,plb-405ex", "ibm,plb4";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
+ dcr-reg = <0x010 0x002>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x5 0x4 /* ECC DED Error */
+ 0x6 0x4>; /* ECC SEC Error */
+ };
+
+ CRYPTO: crypto@ef700000 {
+ compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
+ reg = <0xef700000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x17 0x2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <2>;
+ num-rx-chans = <2>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-405ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x80000000 0x80000000 0x10000000
+ 0xef600000 0xef600000 0x00a00000
+ 0xf0000000 0xf0000000 0x10000000>;
+ dcr-reg = <0x0a0 0x005>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-405ex", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x5 0x1>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x08000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel + initrd";
+ reg = <0x00000000 0x03de0000>;
+ };
+ partition@3de0000 {
+ label = "user config area";
+ reg = <0x03de0000 0x00080000>;
+ };
+ partition@3e60000 {
+ label = "user program area";
+ reg = <0x03e60000 0x04000000>;
+ };
+ partition@7e60000 {
+ label = "flat device tree";
+ reg = <0x07e60000 0x00080000>;
+ };
+ partition@7ee0000 {
+ label = "test program";
+ reg = <0x07ee0000 0x00080000>;
+ };
+ partition@7f60000 {
+ label = "u-boot env";
+ reg = <0x07f60000 0x00040000>;
+ };
+ partition@7fa0000 {
+ label = "u-boot";
+ reg = <0x07fa0000 0x00060000>;
+ };
+ };
+ };
+
+ UART0: serial@ef600200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1a 0x4>;
+ };
+
+ UART1: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600400 {
+ compatible = "ibm,iic-405ex", "ibm,iic";
+ reg = <0xef600400 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "dallas,ds1340";
+ reg = <0x68>;
+ };
+ };
+
+ IIC1: i2c@ef600500 {
+ compatible = "ibm,iic-405ex", "ibm,iic";
+ reg = <0xef600500 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x7 0x4>;
+ };
+
+ RGMII0: emac-rgmii@ef600b00 {
+ compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+ reg = <0xef600b00 0x00000104>;
+ has-mdio;
+ };
+
+ EMAC0: ethernet@ef600900 {
+ linux,network-index = <0x0>;
+ device_type = "network";
+ compatible = "ibm,emac-405ex", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600900 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600a00 {
+ linux,network-index = <0x1>;
+ device_type = "network";
+ compatible = "ibm,emac-405ex", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600a00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <1>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ GPIO: gpio@ef600800 {
+ device_type = "gpio";
+ compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio";
+ reg = <0xef600800 0x50>;
+ };
+ };
+ };
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600200";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
index d6c669c..b868d22 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ b/arch/powerpc/boot/dts/p1010rdb.dts
@@ -9,230 +9,33 @@
* option) any later version.
*/
-/include/ "p1010si.dtsi"
+/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- can0 = &can0;
- can1 = &can1;
- };
-
memory {
device_type = "memory";
};
- ifc@ffe1e000 {
+ board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR DTB Image";
- };
-
- partition@80000 {
- /* 7 MB for Linux Kernel Image */
- reg = <0x00080000 0x00700000>;
- label = "NOR Linux Kernel Image";
- };
-
- partition@800000 {
- /* 20MB for JFFS2 based Root file System */
- reg = <0x00800000 0x01400000>;
- label = "NOR JFFS2 Root File System";
- };
-
- partition@1f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x01f00000 0x00100000>;
- label = "NOR U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,ifc-nand";
- reg = <0x1 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND Compressed RFS Image";
- };
-
- partition@a00000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00f00000>;
- label = "NAND JFFS2 Root File System";
- };
-
- partition@1900000 {
- /* 7MB for User Area */
- reg = <0x01900000 0x00700000>;
- label = "NAND User area";
- };
- };
-
- cpld@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010rdb-cpld";
- reg = <0x3 0x0 0x0000020>;
- bank-width = <1>;
- device-width = <1>;
- };
+ reg = <0x0 0xffe1e000 0 0x2000>;
};
- soc@ffe00000 {
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partition@0 {
- /* 1MB for u-boot Bootloader Image */
- /* 1MB for Environment */
- reg = <0x0 0x00100000>;
- label = "SPI Flash U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 512KB for DTB Image */
- reg = <0x00100000 0x00080000>;
- label = "SPI Flash DTB Image";
- };
-
- partition@180000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00180000 0x00400000>;
- label = "SPI Flash Linux Kernel Image";
- };
-
- partition@580000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00580000 0x00400000>;
- label = "SPI Flash Compressed RFSImage";
- };
-
- partition@980000 {
- /* 6.5MB for JFFS2 based RFS */
- reg = <0x00980000 0x00680000>;
- label = "SPI Flash JFFS2 RFS";
- };
- };
- };
-
- usb@22000 {
- phy_type = "utmi";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x0>;
- };
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x2>;
- };
- };
-
- enet0: ethernet@b0000 {
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy1>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy2>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "sgmii";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
-
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -244,24 +47,10 @@
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -272,3 +61,6 @@
};
};
};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
new file mode 100644
index 0000000..d4c4a77
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -0,0 +1,234 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 7 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00700000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@800000 {
+ /* 20MB for JFFS2 based Root file System */
+ reg = <0x00800000 0x01400000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@1f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x01f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND User area";
+ };
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1010rdb-cpld";
+ reg = <0x3 0x0 0x0000020>;
+ bank-width = <1>;
+ device-width = <1>;
+ };
+};
+
+&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ /* 1MB for u-boot Bootloader Image */
+ /* 1MB for Environment */
+ reg = <0x0 0x00100000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 512KB for DTB Image */
+ reg = <0x00100000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ partition@180000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00180000 0x00400000>;
+ label = "SPI Flash Linux Kernel Image";
+ };
+
+ partition@580000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00580000 0x00400000>;
+ label = "SPI Flash Compressed RFSImage";
+ };
+
+ partition@980000 {
+ /* 6.5MB for JFFS2 based RFS */
+ reg = <0x00980000 0x00680000>;
+ label = "SPI Flash JFFS2 RFS";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "utmi";
+ dr_mode = "host";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy2: ethernet-phy@2 {
+ interrupts = <2 1 0 0>;
+ reg = <0x2>;
+ };
+
+ tbi-phy@3 {
+ device-type = "tbi-phy";
+ reg = <0x3>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy2>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb_36b.dts
new file mode 100644
index 0000000..64776f4
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB";
+ compatible = "fsl,P1010RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_ifc: ifc: ifc@fffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+ 0x1 0x0 0xf 0xff800000 0x00010000
+ 0x3 0x0 0xf 0xffb00000 0x00000020>;
+ reg = <0xf 0xffe1e000 0 0x2000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi
deleted file mode 100644
index cabe0a4..0000000
--- a/arch/powerpc/boot/dts/p1010si.dtsi
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * P1010si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1010";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1010@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
- };
-
- ifc@ffe1e000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
- reg = <0x0 0xffe1e000 0 0x2000>;
- interrupts = <16 2 19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1010-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1010-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1010-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <1>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- sata@18000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can0: can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can1: can@1d000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1d000 0x1000>;
- interrupts = <61 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1010-l2-cache-controller",
- "fsl,p1014-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- dr_mode = "host";
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x26000 0x1000 0xb1030 0x4>;
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x8>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- fsl,sdhci-auto-cmd12;
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <29 2 30 2 34 2>;
- };
-
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <35 2 36 2 40 2>;
- };
-
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <31 2 32 2 33 2>;
- };
-
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1010-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1010-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-};
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index d6a8ae4..518bf99 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -9,267 +9,33 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
-
+/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB";
compatible = "fsl,P1020RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
+ board_lbc: lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- /* This location must not be altered */
- /* 256KB for Vitesse 7385 Switch firmware */
- reg = <0x0 0x00040000>;
- label = "NOR (RO) Vitesse-7385 Firmware";
- read-only;
- };
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR (RO) DTB Image";
- read-only;
- };
-
- partition@80000 {
- /* 3.5 MB for Linux Kernel Image */
- reg = <0x00080000 0x00380000>;
- label = "NOR (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@400000 {
- /* 11MB for JFFS2 based Root file System */
- reg = <0x00400000 0x00b00000>;
- label = "NOR (RW) JFFS2 Root File System";
- };
-
- partition@f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x00f00000 0x00100000>;
- label = "NOR (RO) U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1020-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x1 0x0 0x40000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND (RO) U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND (RO) DTB Image";
- read-only;
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@a00000 {
- /* 7MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00700000>;
- label = "NAND (RW) JFFS2 Root File System";
- };
-
- partition@1100000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x01100000 0x00f00000>;
- label = "NAND (RW) Writable User area";
- };
- };
-
- L2switch@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "vitesse-7385";
- reg = <0x2 0x0 0x20000>;
- };
-
};
- soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
- spi@7000 {
-
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
- mdio@24000 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -281,21 +47,10 @@
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -306,3 +61,6 @@
};
};
};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
new file mode 100644
index 0000000..b5bd86f
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -0,0 +1,247 @@
+/*
+ * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+};
+
+&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@u-boot {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@dtb {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@kernel {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "kernel";
+ read-only;
+ };
+
+ partition@fs {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "file system";
+ read-only;
+ };
+
+ partition@jffs-fs {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "file system jffs2";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+ */
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+
+ tbi-phy@2 {
+ device_type = "tbi-phy";
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts
new file mode 100644
index 0000000..bdbdb60
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts
@@ -0,0 +1,66 @@
+/*
+ * P1020 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1020RDB";
+ compatible = "fsl,P1020RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00020000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
index f0bf7f4..41b4585 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
@@ -16,7 +16,7 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
/ {
model = "fsl,P1020RDB";
@@ -32,7 +32,7 @@
cpus {
PowerPC,P1020@1 {
- status = "disabled";
+ status = "disabled";
};
};
@@ -45,169 +45,19 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- spi-max-frequency = <40000000>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@b0000 {
status = "disabled";
};
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
mpic: pic@40000 {
protected-sources = <
42 29 30 34 /* serial1, enet0-queue-group0 */
17 18 24 45 /* enet0-queue-group1, crypto */
>;
};
-
- };
-
- pci0: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
};
};
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
index 6ec0220..5174538 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
@@ -15,7 +15,7 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
/ {
model = "fsl,P1020RDB";
@@ -28,7 +28,7 @@
cpus {
PowerPC,P1020@0 {
- status = "disabled";
+ status = "disabled";
};
};
@@ -85,12 +85,6 @@
status = "disabled";
};
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@b1000 {
status = "disabled";
};
@@ -135,7 +129,6 @@
global-utilities@e0000 { //global utilities block
status = "disabled";
};
-
};
pci0: pcie@ffe09000 {
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
deleted file mode 100644
index 5c5acb6..0000000
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * P1020si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1020";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- mode = "cpu";
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
-
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
- };
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
- };
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
- */
-
- sdhci@2e000 {
- compatible = "fsl,p1020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1020-guts","fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index ad5b852..d954079 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -9,53 +9,22 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet4 = &enet4;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1021@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1021@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
};
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ lbc: localbus@ffe05000 {
+ reg = <0x0 0xffe05000 0x0 0x1000>;
/* NAND Flash, BCSR, PMC0/1*/
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
@@ -138,99 +107,26 @@
};
};
- soc@ffe00000 {
-
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
+ soc: soc@ffe00000 {
compatible = "fsl,p1021-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1021-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1021-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@u-boot {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -253,237 +149,49 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1021-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
+ mdio@24000 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
};
phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
reg = <0x4>;
};
+ tbi-phy@5 {
+ device_type = "tbi-phy";
+ reg = <0x5>;
+ };
};
mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b1000 {
phy-handle = <&phy4>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
- };
};
- enet2: ethernet@B2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1021-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1",
- "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1021-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1021-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
par_io@e0100 {
@@ -499,8 +207,7 @@
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
- 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
-*/
+ 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
@@ -535,31 +242,10 @@
};
pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -571,31 +257,10 @@
};
pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -606,36 +271,16 @@
};
};
- qe@ffe80000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
+ qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
- fsl,qe-num-riscs = <1>;
- fsl,qe-num-snums = <28>;
status = "disabled"; /* no firmware loaded */
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- interrupts = <63 2 60 2>; //high:47 low:44
- interrupt-parent = <&mpic>;
- };
-
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk12";
tx-clock-name = "clk9";
@@ -645,20 +290,15 @@
};
mdio@2120 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x2120 0x18>;
- compatible = "fsl,ucc-mdio";
-
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <4 1>;
+ interrupts = <4 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <5 1>;
+ interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
@@ -671,10 +311,6 @@
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <5>;
- reg = <0x2400 0x200>;
- interrupts = <40>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk13";
@@ -682,18 +318,7 @@
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x6000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x6000>;
- };
- };
};
};
+
+/include/ "fsl/p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index b9b8719..ef95717 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -8,57 +8,36 @@
* kind, whether express or implied.
*/
-/dts-v1/;
+/include/ "fsl/p1022si-pre.dtsi"
/ {
- model = "fsl,P1022";
+ model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1022@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1022@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
-
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
- 0x2 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xff800000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
+ /*
+ * This node is used to access the pixis via "indirect" mode,
+ * which is done by writing the pixis register index to chip
+ * select 0 and the value to/from chip select 1. Indirect
+ * mode is the only way to access the pixis when DIU video
+ * is enabled. Note that this assumes that the first column
+ * of the 'ranges' property above is the chip select number.
+ */
+ board-control@0,0 {
+ compatible = "fsl,p1022ds-indirect-pixis";
+ reg = <0x0 0x0 1 /* CS0 */
+ 0x1 0x0 1>; /* CS1 */
+ };
+
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -161,51 +140,10 @@
};
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1022-immr", "simple-bus";
+ soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1022-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1022-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
-
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
@@ -216,41 +154,14 @@
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -274,115 +185,20 @@
};
ssi@15000 {
- compatible = "fsl,mpc8610-ssi";
- cell-index = <0>;
- reg = <0x15000 0x100>;
- interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
- fsl,playback-dma = <&dma00>;
- fsl,capture-dma = <&dma01>;
- fsl,fifo-depth = <15>;
fsl,ssi-asynchronous;
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma00: dma-channel@0 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma01: dma-channel@80 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1022-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
+ usb@23000 {
+ status = "disabled";
+ };
+ mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
@@ -391,189 +207,28 @@
interrupts = <9 1 0 0>;
reg = <0x2>;
};
+ tbi-phy@2 {
+ device_type = "tbi-phy";
+ reg = <0x2>;
+ };
};
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- };
-
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- fsl,wake-on-filer;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1022-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- fsl,sdhci-auto-cmd12;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- sata@18000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2 0 0>;
- };
-
- sata@19000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2 0 0>;
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
- reg = <0xe0070 0x20>;
- };
-
- display@10000 {
- compatible = "fsl,diu", "fsl,p1022-diu";
- reg = <0x10000 1000>;
- interrupts = <64 2 0 0>;
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1022-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1022-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
};
pci0: pcie@fffe09000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -585,30 +240,11 @@
};
pci1: pcie@fffe0a000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -619,32 +255,11 @@
};
};
-
pci2: pcie@fffe0b000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -655,3 +270,5 @@
};
};
};
+
+/include/ "fsl/p1022si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
index d3b4782..beb6cb1 100644
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ b/arch/powerpc/boot/dts/p1023rds.dts
@@ -34,137 +34,30 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/dts-v1/;
+/include/ "fsl/p1023si-pre.dtsi"
/ {
model = "fsl,P1023";
compatible = "fsl,P1023RDS";
#address-cells = <2>;
#size-cells = <2>;
-
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,P1023@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- cpu1: PowerPC,P1023@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
+ interrupt-parent = <&mpic>;
memory {
device_type = "memory";
};
- soc@ff600000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1023-immr", "simple-bus";
+ soc: soc@ff600000 {
ranges = <0x0 0x0 0xff600000 0x200000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1023-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1023-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p1023-espi", "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <4>;
-
fsl_dataflash@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -186,197 +79,14 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,qoriq-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1023-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
dr_mode = "host";
phy_type = "ulpi";
};
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30000 0x10000>;
- ranges = <0 0x30000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <58 2>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <45 2>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <45 2>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <57 2>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <57 2>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",
- "fsl,p1022-pmc";
- reg = <0xe0070 0x20>;
- etsec1_clk: soc-clk@B0{
- fsl,pmcdr-mask = <0x00000080>;
- };
- etsec2_clk: soc-clk@B1{
- fsl,pmcdr-mask = <0x00000040>;
- };
- etsec3_clk: soc-clk@B2{
- fsl,pmcdr-mask = <0x00000020>;
- };
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1023-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1023-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
};
- localbus@ff605000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+ lbc: localbus@ff605000 {
reg = <0 0xff605000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
/* NOR Flash, BCSR */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
@@ -428,34 +138,18 @@
};
pci0: pcie@ff60a000 {
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- cell-index = <1>;
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff60a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
/* IRQ[0:3] are pulled up on board, set to active-low */
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0 0 1 &mpic 0 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
>;
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
@@ -467,38 +161,22 @@
};
};
- pci1: pcie@ff609000 {
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- cell-index = <2>;
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci1: pci1: pcie@ff609000 {
reg = <0 0xff609000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
/*
* IRQ[4:6] only for PCIe, set to active-high,
* IRQ[7] is pulled up on board, set to active-low
*/
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 2
- 0000 0 0 2 &mpic 5 2
- 0000 0 0 3 &mpic 6 2
- 0000 0 0 4 &mpic 7 1
+ 0000 0 0 1 &mpic 4 2 0 0
+ 0000 0 0 2 &mpic 5 2 0 0
+ 0000 0 0 3 &mpic 6 2 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
>;
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
@@ -511,37 +189,21 @@
};
pci2: pcie@ff60b000 {
- cell-index = <3>;
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff60b000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
/*
* IRQ[8:10] are pulled up on board, set to active-low
* IRQ[11] only for PCIe, set to active-high,
*/
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 2
+ 0000 0 0 1 &mpic 8 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 2 0 0
>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
@@ -553,3 +215,5 @@
};
};
};
+
+/include/ "fsl/p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index 66f03d6..237310c 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -9,30 +9,17 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020DS";
compatible = "fsl,P2020DS";
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- compatible = "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
@@ -40,203 +27,18 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
- reg = <0x3 0x0 0x30>;
- };
-
- nand@4,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
+ reg = <0 0xffe05000 0 0x1000>;
};
- soc@ffe00000 {
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x2>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
-
- };
-
- mdio@25520 {
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
-
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xCCCCCCCD>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x0001869B>;
- fsl,max-adj = <249999999>;
- };
-
- enet0: ethernet@24000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@25000 {
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet2: ethernet@26000 {
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
- };
-
-
- msi@41600 {
- compatible = "fsl,mpic-msi";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
- pci0: pcie@ffe08000 {
+ pci2: pcie@ffe08000 {
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x8 0x1
- 0000 0x0 0x0 0x2 &mpic 0x9 0x1
- 0000 0x0 0x0 0x3 &mpic 0xa 0x1
- 0000 0x0 0x0 0x4 &mpic 0xb 0x1
- >;
+ reg = <0 0xffe08000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -247,61 +49,11 @@
};
};
- pci1: pcie@ffe09000 {
+ board_pci1: pci1: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
-
- // IDSEL 0x11 func 0 - PCI slot 1
- 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 1 - PCI slot 1
- 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 2 - PCI slot 1
- 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 3 - PCI slot 1
- 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 4 - PCI slot 1
- 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 5 - PCI slot 1
- 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 6 - PCI slot 1
- 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 7 - PCI slot 1
- 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -309,89 +61,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <4 1>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
- pci2: pcie@ffe0a000 {
+ pci0: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0 0xffe0a000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -402,3 +79,11 @@
};
};
};
+
+/*
+ * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi
new file mode 100644
index 0000000..c1cf6ce
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dtsi
@@ -0,0 +1,316 @@
+/*
+ * P2020DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <0x3 0x0 0x30>;
+ };
+
+ nand@4,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <3 1 0 0>;
+ reg = <0x2>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xCCCCCCCD>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x0001869B>;
+ fsl,max-adj = <249999999>;
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+};
+
+&board_pci1 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ // IDSEL 0x11 func 0 - PCI slot 1
+ 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 1 - PCI slot 1
+ 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 2 - PCI slot 1
+ 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 3 - PCI slot 1
+ 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 4 - PCI slot 1
+ 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 5 - PCI slot 1
+ 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 6 - PCI slot 1
+ 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 7 - PCI slot 1
+ 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <4 1 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 1d7a05f..26759a5 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -9,7 +9,7 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
@@ -29,7 +29,8 @@
device_type = "memory";
};
- localbus@ffe05000 {
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -140,7 +141,9 @@
};
- soc@ffe00000 {
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
@@ -148,17 +151,13 @@
};
};
- spi@7000 {
-
- fsl_m25p80@0 {
+ spi@7000 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
spi-max-frequency = <50000000>;
- mode = <0>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
@@ -202,15 +201,17 @@
mdio@24520 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x0>;
- };
+ };
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x1>;
- };
+ };
+ tbi-phy@2 {
+ device_type = "tbi-phy";
+ reg = <0x2>;
+ };
};
mdio@25520 {
@@ -224,11 +225,7 @@
status = "disabled";
};
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
+ ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xCCCCCCCD>;
@@ -252,29 +249,18 @@
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
-
};
pci0: pcie@ffe08000 {
+ reg = <0 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
+ pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -286,21 +272,10 @@
};
pci2: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -311,3 +286,5 @@
};
};
};
+
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index fc8dddd..66aac86 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -14,28 +14,16 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- pci0 = &pci0;
- };
-
cpus {
PowerPC,P2020@1 {
- status = "disabled";
+ status = "disabled";
};
-
- };
-
- memory {
- device_type = "memory";
};
localbus@ffe05000 {
@@ -43,115 +31,18 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
-
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
dma@c300 {
status = "disabled";
};
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25520 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- status = "disabled";
- };
-
enet0: ethernet@24000 {
status = "disabled";
};
- enet1: ethernet@25000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@26000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
-
mpic: pic@40000 {
protected-sources = <
42 76 77 78 79 /* serial1 , dma2 */
@@ -164,40 +55,12 @@
msi@41600 {
status = "disabled";
};
-
-
};
pci0: pcie@ffe08000 {
status = "disabled";
};
- pci1: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
pci2: pcie@ffe0a000 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index 261c34b..9bd8ef4 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -15,28 +15,18 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet0 = &enet0;
- serial0 = &serial1;
- pci1 = &pci1;
- };
-
cpus {
PowerPC,P2020@0 {
- status = "disabled";
+ status = "disabled";
};
};
- memory {
- device_type = "memory";
- };
-
localbus@ffe05000 {
status = "disabled";
};
@@ -70,55 +60,10 @@
status = "disabled";
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
gpio: gpio-controller@f000 {
status = "disabled";
};
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- };
-
dma@21300 {
status = "disabled";
};
@@ -139,12 +84,6 @@
status = "disabled";
};
- enet0: ethernet@24000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@25000 {
status = "disabled";
};
@@ -170,22 +109,6 @@
>;
};
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
global-utilities@e0000 { //global utilities block
status = "disabled";
};
@@ -199,30 +122,4 @@
pci1: pcie@ffe09000 {
status = "disabled";
};
-
- pci2: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
};
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
deleted file mode 100644
index 6def17f..0000000
--- a/arch/powerpc/boot/dts/p2020si.dtsi
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * P2020 Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P2020";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P2020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p2020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p2020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- mode = "cpu";
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
-
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
-
- };
-
- sdhci@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- };
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- };
-};
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 79b6895..4f957db 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p2041si.dtsi"
+/include/ "fsl/p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -106,7 +108,18 @@
};
};
- localbus@ffe124000 {
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
@@ -122,6 +135,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -137,6 +151,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -152,6 +167,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -163,3 +179,5 @@
};
};
};
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2041si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi
deleted file mode 100644
index f7492ed..0000000
--- a/arch/powerpc/boot/dts/p2041si.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-/*
- * P2041 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P2041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p2041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p2041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p2041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p2041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
-
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index bbd113b..f469145 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3041si.dtsi"
+/include/ "fsl/p3041si-pre.dtsi"
/ {
model = "fsl,P3041DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,18 @@
};
};
- localbus@ffe124000 {
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,6 +173,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -175,6 +189,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -190,6 +205,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -205,6 +221,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -216,3 +233,5 @@
};
};
};
+
+/include/ "fsl/p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi
deleted file mode 100644
index 87130b7..0000000
--- a/arch/powerpc/boot/dts/p3041si.dtsi
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * P3041 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p3041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
index 08b9193..529042e 100644
--- a/arch/powerpc/boot/dts/p3060qds.dts
+++ b/arch/powerpc/boot/dts/p3060qds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3060si.dtsi"
+/include/ "fsl/p3060si-pre.dtsi"
/ {
model = "fsl,P3060QDS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -138,7 +140,7 @@
};
};
- rapidio@ffe0c0000 {
+ rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
@@ -149,7 +151,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -210,6 +212,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -225,6 +228,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -236,3 +240,5 @@
};
};
};
+
+/include/ "fsl/p3060si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
deleted file mode 100644
index 68947e1..0000000
--- a/arch/powerpc/boot/dts/p3060si.dtsi
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * P3060 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3060";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3060-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- rmu: rmu@d3000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,srio-rmu";
- reg = <0xd3000 0x500>;
- ranges = <0x0 0xd3000 0x500>;
-
- message-unit@0 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x0 0x100>;
- interrupts = <
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0>;/* msg1_rx_irq */
- };
- message-unit@100 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x100 0x100>;
- interrupts = <
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>;/* msg2_rx_irq */
- };
- doorbell-unit@400 {
- compatible = "fsl,srio-dbell-unit";
- reg = <0x400 0x80>;
- interrupts = <
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0>;/* bell_inb_irq */
- };
- port-write-unit@4e0 {
- compatible = "fsl,srio-port-write-unit";
- reg = <0x4e0 0x20>;
- interrupts = <16 2 1 11>;
- };
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3060-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3060-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3060-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio@ffe0c0000 {
- compatible = "fsl,srio";
- interrupts = <16 2 1 11>;
- #address-cells = <2>;
- #size-cells = <2>;
- fsl,srio-rmu-handle = <&rmu>;
- ranges;
-
- port1 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <1>;
- };
-
- port2 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <2>;
- };
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index c7916dc2..6d60e54 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p4080si.dtsi"
+/include/ "fsl/p4080si-pre.dtsi"
/ {
model = "fsl,P4080DS";
@@ -50,6 +50,9 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -105,12 +108,18 @@
};
};
- rapidio0: rapidio@ffe0c0000 {
- reg = <0xf 0xfe0c0000 0 0x20000>;
- ranges = <0 0 0xc 0x20000000 0 0x01000000>;
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
3 0 0xf 0xffdf0000 0x00008000>;
@@ -132,6 +141,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -147,6 +157,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -162,6 +173,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -174,3 +186,5 @@
};
};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi
deleted file mode 100644
index f20c01a..0000000
--- a/arch/powerpc/boot/dts/p4080si.dtsi
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * P4080 Silicon Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P4080";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
- rio0 = &rapidio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p4080-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p4080-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p4080-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- voltage-ranges = <3300 3300>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p4080-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p4080-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio0: rapidio@ffe0c0000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- interrupts = <
- 16 2 1 11 /* err_irq */
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0 /* bell_inb_irq */
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0 /* msg1_rx_irq */
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>; /* msg2_rx_irq */
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index e6d4099..1c25068 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p5020si.dtsi"
+/include/ "fsl/p5020si-pre.dtsi"
/ {
model = "fsl,P5020DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,18 @@
};
};
- localbus@ffe124000 {
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,7 +173,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -176,6 +189,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -191,6 +205,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -206,6 +221,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -217,3 +233,5 @@
};
};
};
+
+/include/ "fsl/p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
deleted file mode 100644
index e7948ad..0000000
--- a/arch/powerpc/boot/dts/p5020si.dtsi
+++ /dev/null
@@ -1,716 +0,0 @@
-/*
- * P5020 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P5020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e5500@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e5500@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p5020-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p5020-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p5020-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p5020-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 0dc90f9..b1e45a8 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -222,7 +222,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -232,7 +232,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 94a3322..77be771 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -316,7 +316,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <0x2a 0x2>;
@@ -326,7 +326,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <0x2a 0x2>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index ee5538f..56bebce 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -347,7 +347,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -357,7 +357,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <28 2>;
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
index 38c3540..134a5ff 100644
--- a/arch/powerpc/boot/dts/socrates.dts
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -199,7 +199,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -209,7 +209,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
index eab680c..2a55573 100644
--- a/arch/powerpc/boot/dts/storcenter.dts
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -74,7 +74,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x20>;
clock-frequency = <97553800>; /* Hz */
current-speed = <115200>;
@@ -85,7 +85,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x20>;
clock-frequency = <97553800>; /* Hz */
current-speed = <9600>;
diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts
index 49efd44..4f166b0 100644
--- a/arch/powerpc/boot/dts/stxssa8555.dts
+++ b/arch/powerpc/boot/dts/stxssa8555.dts
@@ -210,7 +210,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -220,7 +220,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 0a4cedb..ed264d9 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -250,7 +250,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -260,7 +260,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index f49d091..9252421 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -224,7 +224,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -234,7 +234,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 9452c3c..6e1ac50 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -305,7 +305,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
current-speed = <115200>;
@@ -316,7 +316,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
current-speed = <115200>;
@@ -352,7 +352,7 @@
ranges = <
0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1
1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0
- 2 0x0 0xa3000000 0x00008000 // CAN (2 x i82527)
+ 2 0x0 0xa3000000 0x00008000 // CAN (2 x CC770)
3 0x0 0xa3010000 0x00008000 // NAND FLASH
>;
@@ -393,18 +393,27 @@
};
/* Note: CAN support needs be enabled in U-Boot */
- can0@2,0 {
- compatible = "intel,82527"; // Bosch CC770
+ can@2,0 {
+ compatible = "bosch,cc770"; // Bosch CC770
reg = <2 0x0 0x100>;
interrupts = <4 1>;
interrupt-parent = <&mpic>;
+ bosch,external-clock-frequency = <16000000>;
+ bosch,disconnect-rx1-input;
+ bosch,disconnect-tx1-output;
+ bosch,iso-low-speed-mux;
+ bosch,clock-out-frequency = <16000000>;
};
- can1@2,100 {
- compatible = "intel,82527"; // Bosch CC770
+ can@2,100 {
+ compatible = "bosch,cc770"; // Bosch CC770
reg = <2 0x100 0x100>;
interrupts = <4 1>;
interrupt-parent = <&mpic>;
+ bosch,external-clock-frequency = <16000000>;
+ bosch,disconnect-rx1-input;
+ bosch,disconnect-tx1-output;
+ bosch,iso-low-speed-mux;
};
/* Note: NAND support needs to be enabled in U-Boot */
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 619776f..161e75e 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -305,7 +305,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
current-speed = <115200>;
@@ -316,7 +316,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
current-speed = <115200>;
@@ -352,7 +352,7 @@
ranges = <
0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1
1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0
- 2 0x0 0xe3000000 0x00008000 // CAN (2 x i82527)
+ 2 0x0 0xe3000000 0x00008000 // CAN (2 x CC770)
3 0x0 0xe3010000 0x00008000 // NAND FLASH
>;
@@ -393,18 +393,27 @@
};
/* Note: CAN support needs be enabled in U-Boot */
- can0@2,0 {
- compatible = "intel,82527"; // Bosch CC770
+ can@2,0 {
+ compatible = "bosch,cc770"; // Bosch CC770
reg = <2 0x0 0x100>;
interrupts = <4 1>;
interrupt-parent = <&mpic>;
+ bosch,external-clock-frequency = <16000000>;
+ bosch,disconnect-rx1-input;
+ bosch,disconnect-tx1-output;
+ bosch,iso-low-speed-mux;
+ bosch,clock-out-frequency = <16000000>;
};
- can1@2,100 {
- compatible = "intel,82527"; // Bosch CC770
+ can@2,100 {
+ compatible = "bosch,cc770"; // Bosch CC770
reg = <2 0x100 0x100>;
interrupts = <4 1>;
interrupt-parent = <&mpic>;
+ bosch,external-clock-frequency = <16000000>;
+ bosch,disconnect-rx1-input;
+ bosch,disconnect-tx1-output;
+ bosch,iso-low-speed-mux;
};
/* Note: NAND support needs to be enabled in U-Boot */
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 81bad8c..aa6ff0d 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -224,7 +224,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -234,7 +234,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts
index f6da7ec..c3dba25 100644
--- a/arch/powerpc/boot/dts/tqm8xx.dts
+++ b/arch/powerpc/boot/dts/tqm8xx.dts
@@ -57,6 +57,7 @@
ranges = <
0x0 0x0 0x40000000 0x800000
+ 0x3 0x0 0xc0000000 0x200
>;
flash@0,0 {
@@ -67,6 +68,30 @@
bank-width = <4>;
device-width = <2>;
};
+
+ /* Note: CAN support needs be enabled in U-Boot */
+ can@3,0 {
+ compatible = "intc,82527";
+ reg = <3 0x0 0x80>;
+ interrupts = <8 1>;
+ interrupt-parent = <&PIC>;
+ bosch,external-clock-frequency = <16000000>;
+ bosch,disconnect-rx1-input;
+ bosch,disconnect-tx1-output;
+ bosch,iso-low-speed-mux;
+ bosch,clock-out-frequency = <16000000>;
+ };
+
+ can@3,100 {
+ compatible = "intc,82527";
+ reg = <3 0x100 0x80>;
+ interrupts = <8 1>;
+ interrupt-parent = <&PIC>;
+ bosch,external-clock-frequency = <16000000>;
+ bosch,disconnect-rx1-input;
+ bosch,disconnect-tx1-output;
+ bosch,iso-low-speed-mux;
+ };
};
soc@fff00000 {
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
index ac0a617..cc00f4d 100644
--- a/arch/powerpc/boot/dts/xcalibur1501.dts
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -531,7 +531,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -542,7 +542,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts
index c41a80c..8fd7b70 100644
--- a/arch/powerpc/boot/dts/xpedite5200.dts
+++ b/arch/powerpc/boot/dts/xpedite5200.dts
@@ -333,7 +333,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
current-speed = <115200>;
@@ -344,7 +344,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
current-speed = <115200>;
diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
index c0efcbb..0baa828 100644
--- a/arch/powerpc/boot/dts/xpedite5200_xmon.dts
+++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
@@ -337,7 +337,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
current-speed = <9600>;
@@ -348,7 +348,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
current-speed = <9600>;
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
index db7faf5..53c1c6a 100644
--- a/arch/powerpc/boot/dts/xpedite5301.dts
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -441,7 +441,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -452,7 +452,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
index c364ca6..2152259 100644
--- a/arch/powerpc/boot/dts/xpedite5330.dts
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -477,7 +477,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -488,7 +488,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
index 7a8a4af..11dbda1 100644
--- a/arch/powerpc/boot/dts/xpedite5370.dts
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -439,7 +439,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -450,7 +450,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c
new file mode 100644
index 0000000..925ae43
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-currituck.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ * Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ * Copyright © 2011 David Kleikamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+#define MAX_RANKS 0x4
+#define DDR3_MR0CF 0x80010011U
+
+static unsigned long long ibm_currituck_memsize;
+static unsigned long long ibm_currituck_detect_memsize(void)
+{
+ u32 reg;
+ unsigned i;
+ unsigned long long memsize = 0;
+
+ for(i = 0; i < MAX_RANKS; i++){
+ reg = mfdcrx(DDR3_MR0CF + i);
+
+ if (!(reg & 1))
+ continue;
+
+ reg &= 0x0000f000;
+ reg >>= 12;
+ memsize += (0x800000ULL << reg);
+ }
+
+ return memsize;
+}
+
+static void ibm_currituck_fixups(void)
+{
+ void *devp = finddevice("/");
+ u32 dma_ranges[7];
+
+ dt_fixup_memory(0x0ULL, ibm_currituck_memsize);
+
+ while ((devp = find_node_by_devtype(devp, "pci"))) {
+ if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) {
+ printf("%s: Failed to get dma-ranges\r\n", __func__);
+ continue;
+ }
+
+ dma_ranges[5] = ibm_currituck_memsize >> 32;
+ dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL;
+
+ setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges));
+ }
+}
+
+#define SPRN_PIR 0x11E /* Processor Indentification Register */
+void platform_init(void)
+{
+ unsigned long end_of_ram, avail_ram;
+ u32 pir_reg;
+ int node, size;
+ const u32 *timebase;
+
+ ibm_currituck_memsize = ibm_currituck_detect_memsize();
+ if (ibm_currituck_memsize >> 32)
+ end_of_ram = ~0UL;
+ else
+ end_of_ram = ibm_currituck_memsize;
+ avail_ram = end_of_ram - (unsigned long)_end;
+
+ simple_alloc_init(_end, avail_ram, 128, 64);
+ platform_ops.fixups = ibm_currituck_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ pir_reg = mfspr(SPRN_PIR);
+
+ /* Make sure FDT blob is sane */
+ if (fdt_check_header(_dtb_start) != 0)
+ fatal("Invalid device tree blob\n");
+
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "cpu", sizeof("cpu"));
+ if (!node)
+ fatal("Cannot find cpu node\n");
+ timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+ if (timebase && (size == 4))
+ timebase_period_ns = 1000000000 / *timebase;
+
+ fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+ fdt_init(_dtb_start);
+
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index c74531a..f090e6d 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -163,7 +163,7 @@
link_address='0x500000'
pie=
;;
-miboot|uboot)
+miboot|uboot*)
# miboot and U-boot want just the bare bits, not an ELF binary
ext=bin
objflags="-O binary"
@@ -244,6 +244,9 @@
link_address='0x600000'
platformo="$object/$platform-head.o $object/$platform.o"
;;
+treeboot-currituck)
+ link_address='0x1000000'
+ ;;
treeboot-iss4xx-mpic)
platformo="$object/treeboot-iss4xx.o"
;;
@@ -257,6 +260,8 @@
if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
+ strip_size=$(stat -c %s $vmz.$$)
+
if [ -n "$gzip" ]; then
gzip -n -f -9 "$vmz.$$"
fi
@@ -266,6 +271,24 @@
else
vmz="$vmz.$$"
fi
+else
+ # Calculate the vmlinux.strip size
+ ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
+ strip_size=$(stat -c %s $vmz.$$)
+ rm -f $vmz.$$
+fi
+
+# Round the size to next higher MB limit
+round_size=$(((strip_size + 0xfffff) & 0xfff00000))
+
+round_size=0x$(printf "%x" $round_size)
+link_addr=$(printf "%d" $link_address)
+
+if [ $link_addr -lt $strip_size ]; then
+ echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
+ "overlaps the address of the wrapper($link_address)"
+ echo "INFO: Fixing the link_address of wrapper to ($round_size)"
+ link_address=$round_size
fi
vmz="$vmz$gzip"
@@ -291,6 +314,26 @@
fi
exit 0
;;
+uboot-obs600)
+ rm -f "$ofile"
+ # obs600 wants a multi image with an initrd, so we need to put a fake
+ # one in even when building a "normal" image.
+ if [ -n "$initrd" ]; then
+ real_rd="$initrd"
+ else
+ real_rd=`mktemp`
+ echo "\0" >>"$real_rd"
+ fi
+ ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \
+ $uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile"
+ if [ -z "$initrd" ]; then
+ rm -f "$real_rd"
+ fi
+ if [ -z "$cacheit" ]; then
+ rm -f "$vmz"
+ fi
+ exit 0
+ ;;
esac
addsec() {
diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig
new file mode 100644
index 0000000..c0d228d
--- /dev/null
+++ b/arch/powerpc/configs/40x/klondike_defconfig
@@ -0,0 +1,55 @@
+CONFIG_40x=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_WALNUT is not set
+CONFIG_APM8018X=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MIGRATION is not set
+# CONFIG_SUSPEND is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_AVERAGE=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_FTRACE is not set
diff --git a/arch/powerpc/configs/40x/obs600_defconfig b/arch/powerpc/configs/40x/obs600_defconfig
new file mode 100644
index 0000000..91c110d
--- /dev/null
+++ b/arch/powerpc/configs/40x/obs600_defconfig
@@ -0,0 +1,83 @@
+CONFIG_40x=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_WALNUT is not set
+CONFIG_OBS600=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MATH_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_NDFC=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_NETDEVICES=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IBM_IIC=y
+CONFIG_SENSORS_LM75=y
+CONFIG_THERMAL=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_EXT2_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig
new file mode 100644
index 0000000..4192322
--- /dev/null
+++ b/arch/powerpc/configs/44x/currituck_defconfig
@@ -0,0 +1,110 @@
+CONFIG_44x=y
+CONFIG_SMP=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PPC_47x=y
+# CONFIG_EBONY is not set
+CONFIG_CURRITUCK=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_E1000E=y
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NLS_DEFAULT="n"
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x10000000
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x200
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index a6eb6ad..ca00cf7 100644
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -25,7 +25,8 @@
CONFIG_CMDLINE="root=/dev/issblk0"
# CONFIG_PCI is not set
CONFIG_ADVANCED_OPTIONS=y
-CONFIG_RELOCATABLE=y
+CONFIG_NONSTATIC_KERNEL=y
+CONFIG_DYNAMIC_MEMSTART=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig
new file mode 100644
index 0000000..acf7fb2
--- /dev/null
+++ b/arch/powerpc/configs/chroma_defconfig
@@ -0,0 +1,307 @@
+CONFIG_PPC64=y
+CONFIG_PPC_BOOK3E_64=y
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=256
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_NAMESPACES=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_COUNTERS=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_SCOM_DEBUGFS=y
+CONFIG_PPC_A2_DD2=y
+CONFIG_KVM_GUEST=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_NUMA=y
+# CONFIG_MIGRATION is not set
+CONFIG_PPC_64K_PAGES=y
+CONFIG_SCHED_SMT=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SECCOMP is not set
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
+CONFIG_IPV6_TUNNEL=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NET_TCPPROBE=y
+# CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_DEBUG=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_CDROM_PKTCDVD=y
+CONFIG_MISC_DEVICES=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_SIL=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_SIL680=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_E1000E=y
+CONFIG_TIGON3=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_HWMON is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1511=y
+CONFIG_RTC_DRV_DS1553=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_CIFS=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=m
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_PPC_EMULATED_STATS=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_VIRQ_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_VIRTUALIZATION=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index f087de6..f8aef20 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -37,6 +37,8 @@
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEASPM is not set
+CONFIG_RAPIDIO=y
+CONFIG_FSL_RIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -94,17 +96,17 @@
CONFIG_SATA_SIL=y
CONFIG_PATA_SIL680=y
CONFIG_NETDEVICES=y
-CONFIG_VITESSE_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_E1000=y
CONFIG_E1000E=y
-CONFIG_FSL_PQ_MDIO=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
@@ -155,6 +157,7 @@
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 782822c..7ed8d4c 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -23,6 +23,8 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
+CONFIG_RAPIDIO=y
+CONFIG_FSL_RIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -57,7 +59,6 @@
CONFIG_EEPROM_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
@@ -81,6 +82,7 @@
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index a1e5a17..f37a2ab 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,5 +1,4 @@
CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -93,15 +92,14 @@
CONFIG_PATA_ALI=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
@@ -120,6 +118,9 @@
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -163,6 +164,10 @@
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
@@ -182,6 +187,7 @@
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
@@ -213,4 +219,5 @@
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index dd1e413..abdcd31 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,5 +1,4 @@
CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_EXPERIMENTAL=y
@@ -26,6 +25,7 @@
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
+CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
@@ -94,15 +94,14 @@
CONFIG_PATA_ALI=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
@@ -121,6 +120,9 @@
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -164,6 +166,10 @@
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
@@ -183,6 +189,7 @@
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
@@ -214,4 +221,5 @@
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 535711f..2156e07 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -390,6 +390,11 @@
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 185c292..ded8678 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -6,10 +6,10 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_NAMESPACES=y
+CONFIG_SPARSE_IRQ=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
# CONFIG_PERF_EVENTS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
@@ -17,6 +17,7 @@
CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
+# CONFIG_PPC_POWERNV is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_PS3=y
@@ -27,14 +28,14 @@
CONFIG_PS3_LPM=m
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=y
CONFIG_KEXEC=y
-CONFIG_SPARSE_IRQ=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_SCHED_SMT=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
-CONFIG_PM=y
+CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
# CONFIG_SECCOMP is not set
# CONFIG_PCI is not set
@@ -81,20 +82,23 @@
CONFIG_MD=y
CONFIG_BLK_DEV_DM=m
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_JOYDEV=m
@@ -135,22 +139,21 @@
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_STORAGE=m
CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PS3=m
+CONFIG_RTC_DRV_PS3=y
+# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT4_FS=y
-CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
@@ -167,19 +170,17 @@
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_LOCKDEP=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_STACKOVERFLOW=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index a72f241..30e7d0d 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -304,6 +304,11 @@
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index d51df17..7e313f1 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -34,3 +34,5 @@
header-y += types.h
header-y += ucontext.h
header-y += unistd.h
+
+generic-y += rwsem.h
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e30442c..ad55a1c 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -201,6 +201,7 @@
#define CPU_FTR_POPCNTB LONG_ASM_CONST(0x0400000000000000)
#define CPU_FTR_POPCNTD LONG_ASM_CONST(0x0800000000000000)
#define CPU_FTR_ICSWX LONG_ASM_CONST(0x1000000000000000)
+#define CPU_FTR_VMX_COPY LONG_ASM_CONST(0x2000000000000000)
#ifndef __ASSEMBLY__
@@ -425,7 +426,7 @@
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
- CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE)
+ CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -437,7 +438,7 @@
#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
- CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+ CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX)
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index 1cf20bd..487d46f 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -29,25 +29,8 @@
#include <asm/time.h>
#include <asm/param.h>
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
-
-#define cputime_zero ((cputime_t)0)
-#define cputime_max ((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b) ((__a) + (__b))
-#define cputime_sub(__a, __b) ((__a) - (__b))
-#define cputime_div(__a, __n) ((__a) / (__n))
-#define cputime_halve(__a) ((__a) >> 1)
-#define cputime_eq(__a, __b) ((__a) == (__b))
-#define cputime_gt(__a, __b) ((__a) > (__b))
-#define cputime_ge(__a, __b) ((__a) >= (__b))
-#define cputime_lt(__a, __b) ((__a) < (__b))
-#define cputime_le(__a, __b) ((__a) <= (__b))
-
-#define cputime64_zero ((cputime64_t)0)
-#define cputime64_add(__a, __b) ((__a) + (__b))
-#define cputime64_sub(__a, __b) ((__a) - (__b))
-#define cputime_to_cputime64(__ct) (__ct)
+typedef u64 __nocast cputime_t;
+typedef u64 __nocast cputime64_t;
#ifdef __KERNEL__
@@ -65,7 +48,7 @@
static inline unsigned long cputime_to_jiffies(const cputime_t ct)
{
- return mulhdu(ct, __cputime_jiffies_factor);
+ return mulhdu((__force u64) ct, __cputime_jiffies_factor);
}
/* Estimate the scaled cputime by scaling the real cputime based on
@@ -74,14 +57,15 @@
{
if (cpu_has_feature(CPU_FTR_SPURR) &&
__get_cpu_var(cputime_last_delta))
- return ct * __get_cpu_var(cputime_scaled_last_delta) /
- __get_cpu_var(cputime_last_delta);
+ return (__force u64) ct *
+ __get_cpu_var(cputime_scaled_last_delta) /
+ __get_cpu_var(cputime_last_delta);
return ct;
}
static inline cputime_t jiffies_to_cputime(const unsigned long jif)
{
- cputime_t ct;
+ u64 ct;
unsigned long sec;
/* have to be a little careful about overflow */
@@ -93,7 +77,7 @@
}
if (sec)
ct += (cputime_t) sec * tb_ticks_per_sec;
- return ct;
+ return (__force cputime_t) ct;
}
static inline void setup_cputime_one_jiffy(void)
@@ -103,7 +87,7 @@
static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
{
- cputime_t ct;
+ u64 ct;
u64 sec;
/* have to be a little careful about overflow */
@@ -114,28 +98,28 @@
do_div(ct, HZ);
}
if (sec)
- ct += (cputime_t) sec * tb_ticks_per_sec;
- return ct;
+ ct += (u64) sec * tb_ticks_per_sec;
+ return (__force cputime64_t) ct;
}
static inline u64 cputime64_to_jiffies64(const cputime_t ct)
{
- return mulhdu(ct, __cputime_jiffies_factor);
+ return mulhdu((__force u64) ct, __cputime_jiffies_factor);
}
/*
* Convert cputime <-> microseconds
*/
-extern u64 __cputime_msec_factor;
+extern u64 __cputime_usec_factor;
static inline unsigned long cputime_to_usecs(const cputime_t ct)
{
- return mulhdu(ct, __cputime_msec_factor) * USEC_PER_MSEC;
+ return mulhdu((__force u64) ct, __cputime_usec_factor);
}
static inline cputime_t usecs_to_cputime(const unsigned long us)
{
- cputime_t ct;
+ u64 ct;
unsigned long sec;
/* have to be a little careful about overflow */
@@ -143,13 +127,15 @@
sec = us / 1000000;
if (ct) {
ct *= tb_ticks_per_sec;
- do_div(ct, 1000);
+ do_div(ct, 1000000);
}
if (sec)
ct += (cputime_t) sec * tb_ticks_per_sec;
- return ct;
+ return (__force cputime_t) ct;
}
+#define usecs_to_cputime64(us) usecs_to_cputime(us)
+
/*
* Convert cputime <-> seconds
*/
@@ -157,12 +143,12 @@
static inline unsigned long cputime_to_secs(const cputime_t ct)
{
- return mulhdu(ct, __cputime_sec_factor);
+ return mulhdu((__force u64) ct, __cputime_sec_factor);
}
static inline cputime_t secs_to_cputime(const unsigned long sec)
{
- return (cputime_t) sec * tb_ticks_per_sec;
+ return (__force cputime_t)((u64) sec * tb_ticks_per_sec);
}
/*
@@ -170,7 +156,7 @@
*/
static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
{
- u64 x = ct;
+ u64 x = (__force u64) ct;
unsigned int frac;
frac = do_div(x, tb_ticks_per_sec);
@@ -182,11 +168,11 @@
static inline cputime_t timespec_to_cputime(const struct timespec *p)
{
- cputime_t ct;
+ u64 ct;
ct = (u64) p->tv_nsec * tb_ticks_per_sec;
do_div(ct, 1000000000);
- return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+ return (__force cputime_t)(ct + (u64) p->tv_sec * tb_ticks_per_sec);
}
/*
@@ -194,7 +180,7 @@
*/
static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
{
- u64 x = ct;
+ u64 x = (__force u64) ct;
unsigned int frac;
frac = do_div(x, tb_ticks_per_sec);
@@ -206,11 +192,11 @@
static inline cputime_t timeval_to_cputime(const struct timeval *p)
{
- cputime_t ct;
+ u64 ct;
ct = (u64) p->tv_usec * tb_ticks_per_sec;
do_div(ct, 1000000);
- return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+ return (__force cputime_t)(ct + (u64) p->tv_sec * tb_ticks_per_sec);
}
/*
@@ -220,12 +206,12 @@
static inline unsigned long cputime_to_clock_t(const cputime_t ct)
{
- return mulhdu(ct, __cputime_clockt_factor);
+ return mulhdu((__force u64) ct, __cputime_clockt_factor);
}
static inline cputime_t clock_t_to_cputime(const unsigned long clk)
{
- cputime_t ct;
+ u64 ct;
unsigned long sec;
/* have to be a little careful about overflow */
@@ -236,8 +222,8 @@
do_div(ct, USER_HZ);
}
if (sec)
- ct += (cputime_t) sec * tb_ticks_per_sec;
- return ct;
+ ct += (u64) sec * tb_ticks_per_sec;
+ return (__force cputime_t) ct;
}
#define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct))
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
new file mode 100644
index 0000000..b955012
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -0,0 +1,834 @@
+/* Freescale Integrated Flash Controller
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc
+ *
+ * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_FSL_IFC_H
+#define __ASM_FSL_IFC_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+
+#define FSL_IFC_BANK_COUNT 4
+
+/*
+ * CSPR - Chip Select Property Register
+ */
+#define CSPR_BA 0xFFFF0000
+#define CSPR_BA_SHIFT 16
+#define CSPR_PORT_SIZE 0x00000180
+#define CSPR_PORT_SIZE_SHIFT 7
+/* Port Size 8 bit */
+#define CSPR_PORT_SIZE_8 0x00000080
+/* Port Size 16 bit */
+#define CSPR_PORT_SIZE_16 0x00000100
+/* Port Size 32 bit */
+#define CSPR_PORT_SIZE_32 0x00000180
+/* Write Protect */
+#define CSPR_WP 0x00000040
+#define CSPR_WP_SHIFT 6
+/* Machine Select */
+#define CSPR_MSEL 0x00000006
+#define CSPR_MSEL_SHIFT 1
+/* NOR */
+#define CSPR_MSEL_NOR 0x00000000
+/* NAND */
+#define CSPR_MSEL_NAND 0x00000002
+/* GPCM */
+#define CSPR_MSEL_GPCM 0x00000004
+/* Bank Valid */
+#define CSPR_V 0x00000001
+#define CSPR_V_SHIFT 0
+
+/*
+ * Address Mask Register
+ */
+#define IFC_AMASK_MASK 0xFFFF0000
+#define IFC_AMASK_SHIFT 16
+#define IFC_AMASK(n) (IFC_AMASK_MASK << \
+ (__ilog2(n) - IFC_AMASK_SHIFT))
+
+/*
+ * Chip Select Option Register IFC_NAND Machine
+ */
+/* Enable ECC Encoder */
+#define CSOR_NAND_ECC_ENC_EN 0x80000000
+#define CSOR_NAND_ECC_MODE_MASK 0x30000000
+/* 4 bit correction per 520 Byte sector */
+#define CSOR_NAND_ECC_MODE_4 0x00000000
+/* 8 bit correction per 528 Byte sector */
+#define CSOR_NAND_ECC_MODE_8 0x10000000
+/* Enable ECC Decoder */
+#define CSOR_NAND_ECC_DEC_EN 0x04000000
+/* Row Address Length */
+#define CSOR_NAND_RAL_MASK 0x01800000
+#define CSOR_NAND_RAL_SHIFT 20
+#define CSOR_NAND_RAL_1 0x00000000
+#define CSOR_NAND_RAL_2 0x00800000
+#define CSOR_NAND_RAL_3 0x01000000
+#define CSOR_NAND_RAL_4 0x01800000
+/* Page Size 512b, 2k, 4k */
+#define CSOR_NAND_PGS_MASK 0x00180000
+#define CSOR_NAND_PGS_SHIFT 16
+#define CSOR_NAND_PGS_512 0x00000000
+#define CSOR_NAND_PGS_2K 0x00080000
+#define CSOR_NAND_PGS_4K 0x00100000
+/* Spare region Size */
+#define CSOR_NAND_SPRZ_MASK 0x0000E000
+#define CSOR_NAND_SPRZ_SHIFT 13
+#define CSOR_NAND_SPRZ_16 0x00000000
+#define CSOR_NAND_SPRZ_64 0x00002000
+#define CSOR_NAND_SPRZ_128 0x00004000
+#define CSOR_NAND_SPRZ_210 0x00006000
+#define CSOR_NAND_SPRZ_218 0x00008000
+#define CSOR_NAND_SPRZ_224 0x0000A000
+/* Pages Per Block */
+#define CSOR_NAND_PB_MASK 0x00000700
+#define CSOR_NAND_PB_SHIFT 8
+#define CSOR_NAND_PB(n) ((__ilog2(n) - 5) << CSOR_NAND_PB_SHIFT)
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_NAND_TRHZ_MASK 0x0000001C
+#define CSOR_NAND_TRHZ_SHIFT 2
+#define CSOR_NAND_TRHZ_20 0x00000000
+#define CSOR_NAND_TRHZ_40 0x00000004
+#define CSOR_NAND_TRHZ_60 0x00000008
+#define CSOR_NAND_TRHZ_80 0x0000000C
+#define CSOR_NAND_TRHZ_100 0x00000010
+/* Buffer control disable */
+#define CSOR_NAND_BCTLD 0x00000001
+
+/*
+ * Chip Select Option Register - NOR Flash Mode
+ */
+/* Enable Address shift Mode */
+#define CSOR_NOR_ADM_SHFT_MODE_EN 0x80000000
+/* Page Read Enable from NOR device */
+#define CSOR_NOR_PGRD_EN 0x10000000
+/* AVD Toggle Enable during Burst Program */
+#define CSOR_NOR_AVD_TGL_PGM_EN 0x01000000
+/* Address Data Multiplexing Shift */
+#define CSOR_NOR_ADM_MASK 0x0003E000
+#define CSOR_NOR_ADM_SHIFT_SHIFT 13
+#define CSOR_NOR_ADM_SHIFT(n) ((n) << CSOR_NOR_ADM_SHIFT_SHIFT)
+/* Type of the NOR device hooked */
+#define CSOR_NOR_NOR_MODE_AYSNC_NOR 0x00000000
+#define CSOR_NOR_NOR_MODE_AVD_NOR 0x00000020
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_NOR_TRHZ_MASK 0x0000001C
+#define CSOR_NOR_TRHZ_SHIFT 2
+#define CSOR_NOR_TRHZ_20 0x00000000
+#define CSOR_NOR_TRHZ_40 0x00000004
+#define CSOR_NOR_TRHZ_60 0x00000008
+#define CSOR_NOR_TRHZ_80 0x0000000C
+#define CSOR_NOR_TRHZ_100 0x00000010
+/* Buffer control disable */
+#define CSOR_NOR_BCTLD 0x00000001
+
+/*
+ * Chip Select Option Register - GPCM Mode
+ */
+/* GPCM Mode - Normal */
+#define CSOR_GPCM_GPMODE_NORMAL 0x00000000
+/* GPCM Mode - GenericASIC */
+#define CSOR_GPCM_GPMODE_ASIC 0x80000000
+/* Parity Mode odd/even */
+#define CSOR_GPCM_PARITY_EVEN 0x40000000
+/* Parity Checking enable/disable */
+#define CSOR_GPCM_PAR_EN 0x20000000
+/* GPCM Timeout Count */
+#define CSOR_GPCM_GPTO_MASK 0x0F000000
+#define CSOR_GPCM_GPTO_SHIFT 24
+#define CSOR_GPCM_GPTO(n) ((__ilog2(n) - 8) << CSOR_GPCM_GPTO_SHIFT)
+/* GPCM External Access Termination mode for read access */
+#define CSOR_GPCM_RGETA_EXT 0x00080000
+/* GPCM External Access Termination mode for write access */
+#define CSOR_GPCM_WGETA_EXT 0x00040000
+/* Address Data Multiplexing Shift */
+#define CSOR_GPCM_ADM_MASK 0x0003E000
+#define CSOR_GPCM_ADM_SHIFT_SHIFT 13
+#define CSOR_GPCM_ADM_SHIFT(n) ((n) << CSOR_GPCM_ADM_SHIFT_SHIFT)
+/* Generic ASIC Parity error indication delay */
+#define CSOR_GPCM_GAPERRD_MASK 0x00000180
+#define CSOR_GPCM_GAPERRD_SHIFT 7
+#define CSOR_GPCM_GAPERRD(n) (((n) - 1) << CSOR_GPCM_GAPERRD_SHIFT)
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_GPCM_TRHZ_MASK 0x0000001C
+#define CSOR_GPCM_TRHZ_20 0x00000000
+#define CSOR_GPCM_TRHZ_40 0x00000004
+#define CSOR_GPCM_TRHZ_60 0x00000008
+#define CSOR_GPCM_TRHZ_80 0x0000000C
+#define CSOR_GPCM_TRHZ_100 0x00000010
+/* Buffer control disable */
+#define CSOR_GPCM_BCTLD 0x00000001
+
+/*
+ * Ready Busy Status Register (RB_STAT)
+ */
+/* CSn is READY */
+#define IFC_RB_STAT_READY_CS0 0x80000000
+#define IFC_RB_STAT_READY_CS1 0x40000000
+#define IFC_RB_STAT_READY_CS2 0x20000000
+#define IFC_RB_STAT_READY_CS3 0x10000000
+
+/*
+ * General Control Register (GCR)
+ */
+#define IFC_GCR_MASK 0x8000F800
+/* reset all IFC hardware */
+#define IFC_GCR_SOFT_RST_ALL 0x80000000
+/* Turnaroud Time of external buffer */
+#define IFC_GCR_TBCTL_TRN_TIME 0x0000F800
+#define IFC_GCR_TBCTL_TRN_TIME_SHIFT 11
+
+/*
+ * Common Event and Error Status Register (CM_EVTER_STAT)
+ */
+/* Chip select error */
+#define IFC_CM_EVTER_STAT_CSER 0x80000000
+
+/*
+ * Common Event and Error Enable Register (CM_EVTER_EN)
+ */
+/* Chip select error checking enable */
+#define IFC_CM_EVTER_EN_CSEREN 0x80000000
+
+/*
+ * Common Event and Error Interrupt Enable Register (CM_EVTER_INTR_EN)
+ */
+/* Chip select error interrupt enable */
+#define IFC_CM_EVTER_INTR_EN_CSERIREN 0x80000000
+
+/*
+ * Common Transfer Error Attribute Register-0 (CM_ERATTR0)
+ */
+/* transaction type of error Read/Write */
+#define IFC_CM_ERATTR0_ERTYP_READ 0x80000000
+#define IFC_CM_ERATTR0_ERAID 0x0FF00000
+#define IFC_CM_ERATTR0_ERAID_SHIFT 20
+#define IFC_CM_ERATTR0_ESRCID 0x0000FF00
+#define IFC_CM_ERATTR0_ESRCID_SHIFT 8
+
+/*
+ * Clock Control Register (CCR)
+ */
+#define IFC_CCR_MASK 0x0F0F8800
+/* Clock division ratio */
+#define IFC_CCR_CLK_DIV_MASK 0x0F000000
+#define IFC_CCR_CLK_DIV_SHIFT 24
+#define IFC_CCR_CLK_DIV(n) ((n-1) << IFC_CCR_CLK_DIV_SHIFT)
+/* IFC Clock Delay */
+#define IFC_CCR_CLK_DLY_MASK 0x000F0000
+#define IFC_CCR_CLK_DLY_SHIFT 16
+#define IFC_CCR_CLK_DLY(n) ((n) << IFC_CCR_CLK_DLY_SHIFT)
+/* Invert IFC clock before sending out */
+#define IFC_CCR_INV_CLK_EN 0x00008000
+/* Fedback IFC Clock */
+#define IFC_CCR_FB_IFC_CLK_SEL 0x00000800
+
+/*
+ * Clock Status Register (CSR)
+ */
+/* Clk is stable */
+#define IFC_CSR_CLK_STAT_STABLE 0x80000000
+
+/*
+ * IFC_NAND Machine Specific Registers
+ */
+/*
+ * NAND Configuration Register (NCFGR)
+ */
+/* Auto Boot Mode */
+#define IFC_NAND_NCFGR_BOOT 0x80000000
+/* Addressing Mode-ROW0+n/COL0 */
+#define IFC_NAND_NCFGR_ADDR_MODE_RC0 0x00000000
+/* Addressing Mode-ROW0+n/COL0+n */
+#define IFC_NAND_NCFGR_ADDR_MODE_RC1 0x00400000
+/* Number of loop iterations of FIR sequences for multi page operations */
+#define IFC_NAND_NCFGR_NUM_LOOP_MASK 0x0000F000
+#define IFC_NAND_NCFGR_NUM_LOOP_SHIFT 12
+#define IFC_NAND_NCFGR_NUM_LOOP(n) ((n) << IFC_NAND_NCFGR_NUM_LOOP_SHIFT)
+/* Number of wait cycles */
+#define IFC_NAND_NCFGR_NUM_WAIT_MASK 0x000000FF
+#define IFC_NAND_NCFGR_NUM_WAIT_SHIFT 0
+
+/*
+ * NAND Flash Command Registers (NAND_FCR0/NAND_FCR1)
+ */
+/* General purpose FCM flash command bytes CMD0-CMD7 */
+#define IFC_NAND_FCR0_CMD0 0xFF000000
+#define IFC_NAND_FCR0_CMD0_SHIFT 24
+#define IFC_NAND_FCR0_CMD1 0x00FF0000
+#define IFC_NAND_FCR0_CMD1_SHIFT 16
+#define IFC_NAND_FCR0_CMD2 0x0000FF00
+#define IFC_NAND_FCR0_CMD2_SHIFT 8
+#define IFC_NAND_FCR0_CMD3 0x000000FF
+#define IFC_NAND_FCR0_CMD3_SHIFT 0
+#define IFC_NAND_FCR1_CMD4 0xFF000000
+#define IFC_NAND_FCR1_CMD4_SHIFT 24
+#define IFC_NAND_FCR1_CMD5 0x00FF0000
+#define IFC_NAND_FCR1_CMD5_SHIFT 16
+#define IFC_NAND_FCR1_CMD6 0x0000FF00
+#define IFC_NAND_FCR1_CMD6_SHIFT 8
+#define IFC_NAND_FCR1_CMD7 0x000000FF
+#define IFC_NAND_FCR1_CMD7_SHIFT 0
+
+/*
+ * Flash ROW and COL Address Register (ROWn, COLn)
+ */
+/* Main/spare region locator */
+#define IFC_NAND_COL_MS 0x80000000
+/* Column Address */
+#define IFC_NAND_COL_CA_MASK 0x00000FFF
+
+/*
+ * NAND Flash Byte Count Register (NAND_BC)
+ */
+/* Byte Count for read/Write */
+#define IFC_NAND_BC 0x000001FF
+
+/*
+ * NAND Flash Instruction Registers (NAND_FIR0/NAND_FIR1/NAND_FIR2)
+ */
+/* NAND Machine specific opcodes OP0-OP14*/
+#define IFC_NAND_FIR0_OP0 0xFC000000
+#define IFC_NAND_FIR0_OP0_SHIFT 26
+#define IFC_NAND_FIR0_OP1 0x03F00000
+#define IFC_NAND_FIR0_OP1_SHIFT 20
+#define IFC_NAND_FIR0_OP2 0x000FC000
+#define IFC_NAND_FIR0_OP2_SHIFT 14
+#define IFC_NAND_FIR0_OP3 0x00003F00
+#define IFC_NAND_FIR0_OP3_SHIFT 8
+#define IFC_NAND_FIR0_OP4 0x000000FC
+#define IFC_NAND_FIR0_OP4_SHIFT 2
+#define IFC_NAND_FIR1_OP5 0xFC000000
+#define IFC_NAND_FIR1_OP5_SHIFT 26
+#define IFC_NAND_FIR1_OP6 0x03F00000
+#define IFC_NAND_FIR1_OP6_SHIFT 20
+#define IFC_NAND_FIR1_OP7 0x000FC000
+#define IFC_NAND_FIR1_OP7_SHIFT 14
+#define IFC_NAND_FIR1_OP8 0x00003F00
+#define IFC_NAND_FIR1_OP8_SHIFT 8
+#define IFC_NAND_FIR1_OP9 0x000000FC
+#define IFC_NAND_FIR1_OP9_SHIFT 2
+#define IFC_NAND_FIR2_OP10 0xFC000000
+#define IFC_NAND_FIR2_OP10_SHIFT 26
+#define IFC_NAND_FIR2_OP11 0x03F00000
+#define IFC_NAND_FIR2_OP11_SHIFT 20
+#define IFC_NAND_FIR2_OP12 0x000FC000
+#define IFC_NAND_FIR2_OP12_SHIFT 14
+#define IFC_NAND_FIR2_OP13 0x00003F00
+#define IFC_NAND_FIR2_OP13_SHIFT 8
+#define IFC_NAND_FIR2_OP14 0x000000FC
+#define IFC_NAND_FIR2_OP14_SHIFT 2
+
+/*
+ * Instruction opcodes to be programmed
+ * in FIR registers- 6bits
+ */
+enum ifc_nand_fir_opcodes {
+ IFC_FIR_OP_NOP,
+ IFC_FIR_OP_CA0,
+ IFC_FIR_OP_CA1,
+ IFC_FIR_OP_CA2,
+ IFC_FIR_OP_CA3,
+ IFC_FIR_OP_RA0,
+ IFC_FIR_OP_RA1,
+ IFC_FIR_OP_RA2,
+ IFC_FIR_OP_RA3,
+ IFC_FIR_OP_CMD0,
+ IFC_FIR_OP_CMD1,
+ IFC_FIR_OP_CMD2,
+ IFC_FIR_OP_CMD3,
+ IFC_FIR_OP_CMD4,
+ IFC_FIR_OP_CMD5,
+ IFC_FIR_OP_CMD6,
+ IFC_FIR_OP_CMD7,
+ IFC_FIR_OP_CW0,
+ IFC_FIR_OP_CW1,
+ IFC_FIR_OP_CW2,
+ IFC_FIR_OP_CW3,
+ IFC_FIR_OP_CW4,
+ IFC_FIR_OP_CW5,
+ IFC_FIR_OP_CW6,
+ IFC_FIR_OP_CW7,
+ IFC_FIR_OP_WBCD,
+ IFC_FIR_OP_RBCD,
+ IFC_FIR_OP_BTRD,
+ IFC_FIR_OP_RDSTAT,
+ IFC_FIR_OP_NWAIT,
+ IFC_FIR_OP_WFR,
+ IFC_FIR_OP_SBRD,
+ IFC_FIR_OP_UA,
+ IFC_FIR_OP_RB,
+};
+
+/*
+ * NAND Chip Select Register (NAND_CSEL)
+ */
+#define IFC_NAND_CSEL 0x0C000000
+#define IFC_NAND_CSEL_SHIFT 26
+#define IFC_NAND_CSEL_CS0 0x00000000
+#define IFC_NAND_CSEL_CS1 0x04000000
+#define IFC_NAND_CSEL_CS2 0x08000000
+#define IFC_NAND_CSEL_CS3 0x0C000000
+
+/*
+ * NAND Operation Sequence Start (NANDSEQ_STRT)
+ */
+/* NAND Flash Operation Start */
+#define IFC_NAND_SEQ_STRT_FIR_STRT 0x80000000
+/* Automatic Erase */
+#define IFC_NAND_SEQ_STRT_AUTO_ERS 0x00800000
+/* Automatic Program */
+#define IFC_NAND_SEQ_STRT_AUTO_PGM 0x00100000
+/* Automatic Copyback */
+#define IFC_NAND_SEQ_STRT_AUTO_CPB 0x00020000
+/* Automatic Read Operation */
+#define IFC_NAND_SEQ_STRT_AUTO_RD 0x00004000
+/* Automatic Status Read */
+#define IFC_NAND_SEQ_STRT_AUTO_STAT_RD 0x00000800
+
+/*
+ * NAND Event and Error Status Register (NAND_EVTER_STAT)
+ */
+/* Operation Complete */
+#define IFC_NAND_EVTER_STAT_OPC 0x80000000
+/* Flash Timeout Error */
+#define IFC_NAND_EVTER_STAT_FTOER 0x08000000
+/* Write Protect Error */
+#define IFC_NAND_EVTER_STAT_WPER 0x04000000
+/* ECC Error */
+#define IFC_NAND_EVTER_STAT_ECCER 0x02000000
+/* RCW Load Done */
+#define IFC_NAND_EVTER_STAT_RCW_DN 0x00008000
+/* Boot Loadr Done */
+#define IFC_NAND_EVTER_STAT_BOOT_DN 0x00004000
+/* Bad Block Indicator search select */
+#define IFC_NAND_EVTER_STAT_BBI_SRCH_SE 0x00000800
+
+/*
+ * NAND Flash Page Read Completion Event Status Register
+ * (PGRDCMPL_EVT_STAT)
+ */
+#define PGRDCMPL_EVT_STAT_MASK 0xFFFF0000
+/* Small Page 0-15 Done */
+#define PGRDCMPL_EVT_STAT_SECTION_SP(n) (1 << (31 - (n)))
+/* Large Page(2K) 0-3 Done */
+#define PGRDCMPL_EVT_STAT_LP_2K(n) (0xF << (28 - (n)*4))
+/* Large Page(4K) 0-1 Done */
+#define PGRDCMPL_EVT_STAT_LP_4K(n) (0xFF << (24 - (n)*8))
+
+/*
+ * NAND Event and Error Enable Register (NAND_EVTER_EN)
+ */
+/* Operation complete event enable */
+#define IFC_NAND_EVTER_EN_OPC_EN 0x80000000
+/* Page read complete event enable */
+#define IFC_NAND_EVTER_EN_PGRDCMPL_EN 0x20000000
+/* Flash Timeout error enable */
+#define IFC_NAND_EVTER_EN_FTOER_EN 0x08000000
+/* Write Protect error enable */
+#define IFC_NAND_EVTER_EN_WPER_EN 0x04000000
+/* ECC error logging enable */
+#define IFC_NAND_EVTER_EN_ECCER_EN 0x02000000
+
+/*
+ * NAND Event and Error Interrupt Enable Register (NAND_EVTER_INTR_EN)
+ */
+/* Enable interrupt for operation complete */
+#define IFC_NAND_EVTER_INTR_OPCIR_EN 0x80000000
+/* Enable interrupt for Page read complete */
+#define IFC_NAND_EVTER_INTR_PGRDCMPLIR_EN 0x20000000
+/* Enable interrupt for Flash timeout error */
+#define IFC_NAND_EVTER_INTR_FTOERIR_EN 0x08000000
+/* Enable interrupt for Write protect error */
+#define IFC_NAND_EVTER_INTR_WPERIR_EN 0x04000000
+/* Enable interrupt for ECC error*/
+#define IFC_NAND_EVTER_INTR_ECCERIR_EN 0x02000000
+
+/*
+ * NAND Transfer Error Attribute Register-0 (NAND_ERATTR0)
+ */
+#define IFC_NAND_ERATTR0_MASK 0x0C080000
+/* Error on CS0-3 for NAND */
+#define IFC_NAND_ERATTR0_ERCS_CS0 0x00000000
+#define IFC_NAND_ERATTR0_ERCS_CS1 0x04000000
+#define IFC_NAND_ERATTR0_ERCS_CS2 0x08000000
+#define IFC_NAND_ERATTR0_ERCS_CS3 0x0C000000
+/* Transaction type of error Read/Write */
+#define IFC_NAND_ERATTR0_ERTTYPE_READ 0x00080000
+
+/*
+ * NAND Flash Status Register (NAND_FSR)
+ */
+/* First byte of data read from read status op */
+#define IFC_NAND_NFSR_RS0 0xFF000000
+/* Second byte of data read from read status op */
+#define IFC_NAND_NFSR_RS1 0x00FF0000
+
+/*
+ * ECC Error Status Registers (ECCSTAT0-ECCSTAT3)
+ */
+/* Number of ECC errors on sector n (n = 0-15) */
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_MASK 0x0F000000
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_SHIFT 24
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_MASK 0x000F0000
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_SHIFT 16
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_MASK 0x00000F00
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_SHIFT 8
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_MASK 0x0000000F
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_SHIFT 0
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_MASK 0x0F000000
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_SHIFT 24
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_MASK 0x000F0000
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_SHIFT 16
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_MASK 0x00000F00
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_SHIFT 8
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_MASK 0x0000000F
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_SHIFT 0
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_MASK 0x0F000000
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_SHIFT 24
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_MASK 0x000F0000
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_SHIFT 16
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_MASK 0x00000F00
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_SHIFT 8
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_MASK 0x0000000F
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_SHIFT 0
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_MASK 0x0F000000
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_SHIFT 24
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_MASK 0x000F0000
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_SHIFT 16
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_MASK 0x00000F00
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_SHIFT 8
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_MASK 0x0000000F
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_SHIFT 0
+
+/*
+ * NAND Control Register (NANDCR)
+ */
+#define IFC_NAND_NCR_FTOCNT_MASK 0x1E000000
+#define IFC_NAND_NCR_FTOCNT_SHIFT 25
+#define IFC_NAND_NCR_FTOCNT(n) ((_ilog2(n) - 8) << IFC_NAND_NCR_FTOCNT_SHIFT)
+
+/*
+ * NAND_AUTOBOOT_TRGR
+ */
+/* Trigger RCW load */
+#define IFC_NAND_AUTOBOOT_TRGR_RCW_LD 0x80000000
+/* Trigget Auto Boot */
+#define IFC_NAND_AUTOBOOT_TRGR_BOOT_LD 0x20000000
+
+/*
+ * NAND_MDR
+ */
+/* 1st read data byte when opcode SBRD */
+#define IFC_NAND_MDR_RDATA0 0xFF000000
+/* 2nd read data byte when opcode SBRD */
+#define IFC_NAND_MDR_RDATA1 0x00FF0000
+
+/*
+ * NOR Machine Specific Registers
+ */
+/*
+ * NOR Event and Error Status Register (NOR_EVTER_STAT)
+ */
+/* NOR Command Sequence Operation Complete */
+#define IFC_NOR_EVTER_STAT_OPC_NOR 0x80000000
+/* Write Protect Error */
+#define IFC_NOR_EVTER_STAT_WPER 0x04000000
+/* Command Sequence Timeout Error */
+#define IFC_NOR_EVTER_STAT_STOER 0x01000000
+
+/*
+ * NOR Event and Error Enable Register (NOR_EVTER_EN)
+ */
+/* NOR Command Seq complete event enable */
+#define IFC_NOR_EVTER_EN_OPCEN_NOR 0x80000000
+/* Write Protect Error Checking Enable */
+#define IFC_NOR_EVTER_EN_WPEREN 0x04000000
+/* Timeout Error Enable */
+#define IFC_NOR_EVTER_EN_STOEREN 0x01000000
+
+/*
+ * NOR Event and Error Interrupt Enable Register (NOR_EVTER_INTR_EN)
+ */
+/* Enable interrupt for OPC complete */
+#define IFC_NOR_EVTER_INTR_OPCEN_NOR 0x80000000
+/* Enable interrupt for write protect error */
+#define IFC_NOR_EVTER_INTR_WPEREN 0x04000000
+/* Enable interrupt for timeout error */
+#define IFC_NOR_EVTER_INTR_STOEREN 0x01000000
+
+/*
+ * NOR Transfer Error Attribute Register-0 (NOR_ERATTR0)
+ */
+/* Source ID for error transaction */
+#define IFC_NOR_ERATTR0_ERSRCID 0xFF000000
+/* AXI ID for error transation */
+#define IFC_NOR_ERATTR0_ERAID 0x000FF000
+/* Chip select corresponds to NOR error */
+#define IFC_NOR_ERATTR0_ERCS_CS0 0x00000000
+#define IFC_NOR_ERATTR0_ERCS_CS1 0x00000010
+#define IFC_NOR_ERATTR0_ERCS_CS2 0x00000020
+#define IFC_NOR_ERATTR0_ERCS_CS3 0x00000030
+/* Type of transaction read/write */
+#define IFC_NOR_ERATTR0_ERTYPE_READ 0x00000001
+
+/*
+ * NOR Transfer Error Attribute Register-2 (NOR_ERATTR2)
+ */
+#define IFC_NOR_ERATTR2_ER_NUM_PHASE_EXP 0x000F0000
+#define IFC_NOR_ERATTR2_ER_NUM_PHASE_PER 0x00000F00
+
+/*
+ * NOR Control Register (NORCR)
+ */
+#define IFC_NORCR_MASK 0x0F0F0000
+/* No. of Address/Data Phase */
+#define IFC_NORCR_NUM_PHASE_MASK 0x0F000000
+#define IFC_NORCR_NUM_PHASE_SHIFT 24
+#define IFC_NORCR_NUM_PHASE(n) ((n-1) << IFC_NORCR_NUM_PHASE_SHIFT)
+/* Sequence Timeout Count */
+#define IFC_NORCR_STOCNT_MASK 0x000F0000
+#define IFC_NORCR_STOCNT_SHIFT 16
+#define IFC_NORCR_STOCNT(n) ((__ilog2(n) - 8) << IFC_NORCR_STOCNT_SHIFT)
+
+/*
+ * GPCM Machine specific registers
+ */
+/*
+ * GPCM Event and Error Status Register (GPCM_EVTER_STAT)
+ */
+/* Timeout error */
+#define IFC_GPCM_EVTER_STAT_TOER 0x04000000
+/* Parity error */
+#define IFC_GPCM_EVTER_STAT_PER 0x01000000
+
+/*
+ * GPCM Event and Error Enable Register (GPCM_EVTER_EN)
+ */
+/* Timeout error enable */
+#define IFC_GPCM_EVTER_EN_TOER_EN 0x04000000
+/* Parity error enable */
+#define IFC_GPCM_EVTER_EN_PER_EN 0x01000000
+
+/*
+ * GPCM Event and Error Interrupt Enable Register (GPCM_EVTER_INTR_EN)
+ */
+/* Enable Interrupt for timeout error */
+#define IFC_GPCM_EEIER_TOERIR_EN 0x04000000
+/* Enable Interrupt for Parity error */
+#define IFC_GPCM_EEIER_PERIR_EN 0x01000000
+
+/*
+ * GPCM Transfer Error Attribute Register-0 (GPCM_ERATTR0)
+ */
+/* Source ID for error transaction */
+#define IFC_GPCM_ERATTR0_ERSRCID 0xFF000000
+/* AXI ID for error transaction */
+#define IFC_GPCM_ERATTR0_ERAID 0x000FF000
+/* Chip select corresponds to GPCM error */
+#define IFC_GPCM_ERATTR0_ERCS_CS0 0x00000000
+#define IFC_GPCM_ERATTR0_ERCS_CS1 0x00000040
+#define IFC_GPCM_ERATTR0_ERCS_CS2 0x00000080
+#define IFC_GPCM_ERATTR0_ERCS_CS3 0x000000C0
+/* Type of transaction read/Write */
+#define IFC_GPCM_ERATTR0_ERTYPE_READ 0x00000001
+
+/*
+ * GPCM Transfer Error Attribute Register-2 (GPCM_ERATTR2)
+ */
+/* On which beat of address/data parity error is observed */
+#define IFC_GPCM_ERATTR2_PERR_BEAT 0x00000C00
+/* Parity Error on byte */
+#define IFC_GPCM_ERATTR2_PERR_BYTE 0x000000F0
+/* Parity Error reported in addr or data phase */
+#define IFC_GPCM_ERATTR2_PERR_DATA_PHASE 0x00000001
+
+/*
+ * GPCM Status Register (GPCM_STAT)
+ */
+#define IFC_GPCM_STAT_BSY 0x80000000 /* GPCM is busy */
+
+/*
+ * IFC Controller NAND Machine registers
+ */
+struct fsl_ifc_nand {
+ __be32 ncfgr;
+ u32 res1[0x4];
+ __be32 nand_fcr0;
+ __be32 nand_fcr1;
+ u32 res2[0x8];
+ __be32 row0;
+ u32 res3;
+ __be32 col0;
+ u32 res4;
+ __be32 row1;
+ u32 res5;
+ __be32 col1;
+ u32 res6;
+ __be32 row2;
+ u32 res7;
+ __be32 col2;
+ u32 res8;
+ __be32 row3;
+ u32 res9;
+ __be32 col3;
+ u32 res10[0x24];
+ __be32 nand_fbcr;
+ u32 res11;
+ __be32 nand_fir0;
+ __be32 nand_fir1;
+ __be32 nand_fir2;
+ u32 res12[0x10];
+ __be32 nand_csel;
+ u32 res13;
+ __be32 nandseq_strt;
+ u32 res14;
+ __be32 nand_evter_stat;
+ u32 res15;
+ __be32 pgrdcmpl_evt_stat;
+ u32 res16[0x2];
+ __be32 nand_evter_en;
+ u32 res17[0x2];
+ __be32 nand_evter_intr_en;
+ u32 res18[0x2];
+ __be32 nand_erattr0;
+ __be32 nand_erattr1;
+ u32 res19[0x10];
+ __be32 nand_fsr;
+ u32 res20;
+ __be32 nand_eccstat[4];
+ u32 res21[0x20];
+ __be32 nanndcr;
+ u32 res22[0x2];
+ __be32 nand_autoboot_trgr;
+ u32 res23;
+ __be32 nand_mdr;
+ u32 res24[0x5C];
+};
+
+/*
+ * IFC controller NOR Machine registers
+ */
+struct fsl_ifc_nor {
+ __be32 nor_evter_stat;
+ u32 res1[0x2];
+ __be32 nor_evter_en;
+ u32 res2[0x2];
+ __be32 nor_evter_intr_en;
+ u32 res3[0x2];
+ __be32 nor_erattr0;
+ __be32 nor_erattr1;
+ __be32 nor_erattr2;
+ u32 res4[0x4];
+ __be32 norcr;
+ u32 res5[0xEF];
+};
+
+/*
+ * IFC controller GPCM Machine registers
+ */
+struct fsl_ifc_gpcm {
+ __be32 gpcm_evter_stat;
+ u32 res1[0x2];
+ __be32 gpcm_evter_en;
+ u32 res2[0x2];
+ __be32 gpcm_evter_intr_en;
+ u32 res3[0x2];
+ __be32 gpcm_erattr0;
+ __be32 gpcm_erattr1;
+ __be32 gpcm_erattr2;
+ __be32 gpcm_stat;
+ u32 res4[0x1F3];
+};
+
+/*
+ * IFC Controller Registers
+ */
+struct fsl_ifc_regs {
+ __be32 ifc_rev;
+ u32 res1[0x3];
+ struct {
+ __be32 cspr;
+ u32 res2[0x2];
+ } cspr_cs[FSL_IFC_BANK_COUNT];
+ u32 res3[0x18];
+ struct {
+ __be32 amask;
+ u32 res4[0x2];
+ } amask_cs[FSL_IFC_BANK_COUNT];
+ u32 res5[0x18];
+ struct {
+ __be32 csor;
+ u32 res6[0x2];
+ } csor_cs[FSL_IFC_BANK_COUNT];
+ u32 res7[0x18];
+ struct {
+ __be32 ftim[4];
+ u32 res8[0x8];
+ } ftim_cs[FSL_IFC_BANK_COUNT];
+ u32 res9[0x60];
+ __be32 rb_stat;
+ u32 res10[0x2];
+ __be32 ifc_gcr;
+ u32 res11[0x2];
+ __be32 cm_evter_stat;
+ u32 res12[0x2];
+ __be32 cm_evter_en;
+ u32 res13[0x2];
+ __be32 cm_evter_intr_en;
+ u32 res14[0x2];
+ __be32 cm_erattr0;
+ __be32 cm_erattr1;
+ u32 res15[0x2];
+ __be32 ifc_ccr;
+ __be32 ifc_csr;
+ u32 res16[0x2EB];
+ struct fsl_ifc_nand ifc_nand;
+ struct fsl_ifc_nor ifc_nor;
+ struct fsl_ifc_gpcm ifc_gpcm;
+};
+
+extern unsigned int convert_ifc_address(phys_addr_t addr_base);
+extern int fsl_ifc_find(phys_addr_t addr_base);
+
+/* overview of the fsl ifc controller */
+
+struct fsl_ifc_ctrl {
+ /* device info */
+ struct device *dev;
+ struct fsl_ifc_regs __iomem *regs;
+ int irq;
+ int nand_irq;
+ spinlock_t lock;
+ void *nand;
+
+ u32 nand_stat;
+ wait_queue_head_t nand_wait;
+};
+
+extern struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+
+
+#endif /* __ASM_FSL_IFC_H */
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 8a0b5ec..420b453 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -238,8 +238,6 @@
#define FPAR_LP_CI_SHIFT 0
__be32 fbcr; /**< Flash Byte Count Register */
#define FBCR_BC 0x00000FFF
- u8 res11[0x8];
- u8 res8[0xF00];
};
/*
@@ -294,6 +292,11 @@
/* status read from LTESR by irq handler */
unsigned int irq_status;
+
+#ifdef CONFIG_SUSPEND
+ /* save regs when system go to deep-sleep */
+ struct fsl_lbc_regs *saved_regs;
+#endif
};
extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index 8600493..dfdb95b 100644
--- a/arch/powerpc/include/asm/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -5,7 +5,6 @@
#include <asm/page.h>
extern struct kmem_cache *hugepte_cache;
-extern void __init reserve_hugetlb_gpages(void);
static inline pte_t *hugepd_page(hugepd_t hpd)
{
@@ -22,14 +21,14 @@
unsigned pdshift)
{
/*
- * On 32-bit, we have multiple higher-level table entries that point to
- * the same hugepte. Just use the first one since they're all
+ * On FSL BookE, we have multiple higher-level table entries that
+ * point to the same hugepte. Just use the first one since they're all
* identical. So for that case, idx=0.
*/
unsigned long idx = 0;
pte_t *dir = hugepd_page(*hpdp);
-#ifdef CONFIG_PPC64
+#ifndef CONFIG_PPC_FSL_BOOK3E
idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
#endif
@@ -53,7 +52,8 @@
}
#endif
-void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte);
+void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
+ pte_t pte);
void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
@@ -124,7 +124,17 @@
unsigned long addr, pte_t *ptep,
pte_t pte, int dirty)
{
+#ifdef HUGETLB_NEED_PRELOAD
+ /*
+ * The "return 1" forces a call of update_mmu_cache, which will write a
+ * TLB entry. Without this, platforms that don't do a write of the TLB
+ * entry in the TLB miss handler asm will fault ad infinitum.
+ */
+ ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+ return 1;
+#else
return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+#endif
}
static inline pte_t huge_ptep_get(pte_t *ptep)
@@ -142,14 +152,24 @@
}
#else /* ! CONFIG_HUGETLB_PAGE */
-static inline void reserve_hugetlb_gpages(void)
-{
- pr_err("Cannot reserve gpages without hugetlb enabled\n");
-}
static inline void flush_hugetlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+
+/*
+ * FSL Book3E platforms require special gpage handling - the gpages
+ * are reserved early in the boot process by memblock instead of via
+ * the .dts as on IBM platforms.
+ */
+#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_PPC_FSL_BOOK3E)
+extern void __init reserve_hugetlb_gpages(void);
+#else
+static inline void reserve_hugetlb_gpages(void)
+{
+}
#endif
#endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 45698d5..a3855b8 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -394,7 +394,7 @@
#endif /* CONFIG_PPC32 */
/* The "__do_*" operations below provide the actual "base" implementation
- * for each of the defined acccessor. Some of them use the out_* functions
+ * for each of the defined accessors. Some of them use the out_* functions
* directly, some of them still use EEH, though we might change that in the
* future. Those macros below provide the necessary argument swapping and
* handling of the IO base for PIO.
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index bffd062..c977620 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -32,11 +32,11 @@
#ifndef __ASSEMBLY__
-#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE)
+#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_NONSTATIC_KERNEL)
extern void reserve_kdump_trampoline(void);
extern void setup_kdump_trampoline(void);
#else
-/* !CRASH_DUMP || RELOCATABLE */
+/* !CRASH_DUMP || !NONSTATIC_KERNEL */
static inline void reserve_kdump_trampoline(void) { ; }
static inline void setup_kdump_trampoline(void) { ; }
#endif
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index f921eb1..16d7e33 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -49,7 +49,6 @@
#define KEXEC_STATE_REAL_MODE 2
#ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
#include <asm/reg.h>
typedef void (*crash_shutdown_t)(void);
@@ -73,11 +72,6 @@
master to copy new code to 0 */
extern int crashing_cpu;
extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
-extern cpumask_t cpus_in_sr;
-static inline int kexec_sr_activated(int cpu)
-{
- return cpumask_test_cpu(cpu, &cpus_in_sr);
-}
struct kimage;
struct pt_regs;
@@ -94,7 +88,6 @@
extern void machine_kexec_mask_interrupts(void);
#else /* !CONFIG_KEXEC */
-static inline int kexec_sr_activated(int cpu) { return 0; }
static inline void crash_kexec_secondary(struct pt_regs *regs) { }
static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h
index d8520ef..fc195d0 100644
--- a/arch/powerpc/include/asm/keylargo.h
+++ b/arch/powerpc/include/asm/keylargo.h
@@ -51,7 +51,7 @@
#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05)
-/* Hrm... this one is only to be used on Pismo. It seeem to also
+/* Hrm... this one is only to be used on Pismo. It seems to also
* control the timebase enable on other machines. Still to be
* experimented... --BenH.
*/
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index d4df013..69c7377 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -381,39 +381,6 @@
}
#endif
-static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
- unsigned long pte_index)
-{
- unsigned long rb, va_low;
-
- rb = (v & ~0x7fUL) << 16; /* AVA field */
- va_low = pte_index >> 3;
- if (v & HPTE_V_SECONDARY)
- va_low = ~va_low;
- /* xor vsid from AVA */
- if (!(v & HPTE_V_1TB_SEG))
- va_low ^= v >> 12;
- else
- va_low ^= v >> 24;
- va_low &= 0x7ff;
- if (v & HPTE_V_LARGE) {
- rb |= 1; /* L field */
- if (cpu_has_feature(CPU_FTR_ARCH_206) &&
- (r & 0xff000)) {
- /* non-16MB large page, must be 64k */
- /* (masks depend on page size) */
- rb |= 0x1000; /* page encoding in LP field */
- rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
- rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */
- }
- } else {
- /* 4kB page */
- rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */
- }
- rb |= (v >> 54) & 0x300; /* B field */
- return rb;
-}
-
/* Magic register values loaded into r3 and r4 before the 'sc' assembly
* instruction for the OSI hypercalls */
#define OSI_SC_MAGIC_R3 0x113724FA
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index e43fe42..d0ac94f 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -29,4 +29,37 @@
#define SPAPR_TCE_SHIFT 12
+static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
+ unsigned long pte_index)
+{
+ unsigned long rb, va_low;
+
+ rb = (v & ~0x7fUL) << 16; /* AVA field */
+ va_low = pte_index >> 3;
+ if (v & HPTE_V_SECONDARY)
+ va_low = ~va_low;
+ /* xor vsid from AVA */
+ if (!(v & HPTE_V_1TB_SEG))
+ va_low ^= v >> 12;
+ else
+ va_low ^= v >> 24;
+ va_low &= 0x7ff;
+ if (v & HPTE_V_LARGE) {
+ rb |= 1; /* L field */
+ if (cpu_has_feature(CPU_FTR_ARCH_206) &&
+ (r & 0xff000)) {
+ /* non-16MB large page, must be 64k */
+ /* (masks depend on page size) */
+ rb |= 0x1000; /* page encoding in LP field */
+ rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
+ rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */
+ }
+ } else {
+ /* 4kB page */
+ rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */
+ }
+ rb |= (v >> 54) & 0x300; /* B field */
+ return rb;
+}
+
#endif /* __ASM_KVM_BOOK3S_64_H__ */
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index f77c708..233f9ec 100644
--- a/arch/powerpc/include/asm/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -231,7 +231,7 @@
LV1_CALL(write_htab_entry, 4, 0, 1 )
LV1_CALL(construct_virtual_address_space, 3, 2, 2 )
LV1_CALL(invalidate_htab_entries, 5, 0, 3 )
-LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 )
+LV1_CALL(get_virtual_address_space_id_of_ppe, 0, 1, 4 )
LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 )
LV1_CALL(select_virtual_address_space, 1, 0, 7 )
LV1_CALL(pause, 1, 0, 9 )
@@ -264,7 +264,7 @@
LV1_CALL(get_spe_irq_outlet, 2, 1, 78 )
LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 )
LV1_CALL(create_repository_node, 6, 0, 90 )
-LV1_CALL(get_repository_node_value, 5, 2, 91 )
+LV1_CALL(read_repository_node, 5, 2, 91 )
LV1_CALL(modify_repository_node_value, 6, 0, 92 )
LV1_CALL(remove_repository_node, 4, 0, 93 )
LV1_CALL(read_htab_entries, 2, 5, 95 )
@@ -276,7 +276,7 @@
LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 )
LV1_CALL(map_htab, 1, 1, 122 )
LV1_CALL(unmap_htab, 1, 0, 123 )
-LV1_CALL(get_version_info, 0, 1, 127 )
+LV1_CALL(get_version_info, 0, 2, 127 )
LV1_CALL(insert_htab_entry, 6, 3, 158 )
LV1_CALL(read_virtual_uart, 3, 1, 162 )
LV1_CALL(write_virtual_uart, 3, 1, 163 )
@@ -294,9 +294,9 @@
LV1_CALL(net_add_multicast_address, 4, 0, 185 )
LV1_CALL(net_remove_multicast_address, 4, 0, 186 )
LV1_CALL(net_start_tx_dma, 4, 0, 187 )
-LV1_CALL(net_stop_tx_dma, 3, 0, 188 )
+LV1_CALL(net_stop_tx_dma, 2, 0, 188 )
LV1_CALL(net_start_rx_dma, 4, 0, 189 )
-LV1_CALL(net_stop_rx_dma, 3, 0, 190 )
+LV1_CALL(net_stop_rx_dma, 2, 0, 190 )
LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 )
LV1_CALL(net_set_interrupt_mask, 4, 0, 193 )
LV1_CALL(net_control, 6, 2, 194 )
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index b540d6f..bf37931 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -213,6 +213,9 @@
* allow assignment/enabling of the device. */
int (*pcibios_enable_device_hook)(struct pci_dev *);
+ /* Called after scan and before resource survey */
+ void (*pcibios_fixup_phb)(struct pci_controller *hose);
+
/* Called to shutdown machine specific hardware not already controlled
* by other drivers.
*/
diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h
deleted file mode 100644
index 43efc34..0000000
--- a/arch/powerpc/include/asm/memblock.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_POWERPC_MEMBLOCK_H
-#define _ASM_POWERPC_MEMBLOCK_H
-
-#include <asm/udbg.h>
-
-#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
-
-#endif /* _ASM_POWERPC_MEMBLOCK_H */
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 0260ea5..f5f89ca 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -214,6 +214,10 @@
unsigned int id;
unsigned int active;
unsigned long vdso_base;
+#ifdef CONFIG_PPC_ICSWX
+ struct spinlock *cop_lockp; /* guard cop related stuff */
+ unsigned long acop; /* mask of enabled coprocessor types */
+#endif /* CONFIG_PPC_ICSWX */
#ifdef CONFIG_PPC_MM_SLICES
u64 low_slices_psize; /* SLB page size encodings */
u64 high_slices_psize; /* 4 bits per slice for now */
@@ -254,6 +258,13 @@
#ifdef CONFIG_PPC64
extern unsigned long linear_map_top;
+
+/*
+ * 64-bit booke platforms don't load the tlb in the tlb miss handler code.
+ * HUGETLB_NEED_PRELOAD handles this - it causes huge_ptep_set_access_flags to
+ * return 1, indicating that the tlb requires preloading.
+ */
+#define HUGETLB_NEED_PRELOAD
#endif
#endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index db645ec..412ba49 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -312,10 +312,9 @@
* (i.e. everything above 0xC000000000000000), except the very top
* segment, which simplifies several things.
*
- * - We allow for 15 significant bits of ESID and 20 bits of
- * context for user addresses. i.e. 8T (43 bits) of address space for
- * up to 1M contexts (although the page table structure and context
- * allocation will need changes to take advantage of this).
+ * - We allow for 16 significant bits of ESID and 19 bits of
+ * context for user addresses. i.e. 16T (44 bits) of address space for
+ * up to half a million contexts.
*
* - The scramble function gives robust scattering in the hash
* table (at least based on some initial results). The previous
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index e6fae49..67b4d98 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -251,6 +251,9 @@
/* The instance data of a given MPIC */
struct mpic
{
+ /* The OpenFirmware dt node for this MPIC */
+ struct device_node *node;
+
/* The remapper for this MPIC */
struct irq_host *irqhost;
@@ -293,6 +296,9 @@
/* Register access method */
enum mpic_reg_type reg_type;
+ /* The physical base address of the MPIC */
+ phys_addr_t paddr;
+
/* The various ioremap'ed bases */
struct mpic_reg_bank gregs;
struct mpic_reg_bank tmregs;
@@ -331,11 +337,11 @@
* Note setting any ID (leaving those bits to 0) means standard MPIC
*/
-/* This is the primary controller, only that one has IPIs and
- * has afinity control. A non-primary MPIC always uses CPU0
- * registers only
+/*
+ * This is a secondary ("chained") controller; it only uses the CPU0
+ * registers. Primary controllers have IPIs and affinity control.
*/
-#define MPIC_PRIMARY 0x00000001
+#define MPIC_SECONDARY 0x00000001
/* Set this for a big-endian MPIC */
#define MPIC_BIG_ENDIAN 0x00000002
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 2893e8f..a4b28f1 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -109,6 +109,14 @@
#define OPAL_PCI_MAP_PE_DMA_WINDOW 44
#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45
#define OPAL_PCI_RESET 49
+#define OPAL_PCI_GET_HUB_DIAG_DATA 50
+#define OPAL_PCI_GET_PHB_DIAG_DATA 51
+#define OPAL_PCI_FENCE_PHB 52
+#define OPAL_PCI_REINIT 53
+#define OPAL_PCI_MASK_PE_ERROR 54
+#define OPAL_SET_SLOT_LED_STATUS 55
+#define OPAL_GET_EPOW_STATUS 56
+#define OPAL_SET_SYSTEM_ATTENTION_LED 57
#ifndef __ASSEMBLY__
@@ -169,7 +177,11 @@
OPAL_EVENT_NVRAM = 0x2,
OPAL_EVENT_RTC = 0x4,
OPAL_EVENT_CONSOLE_OUTPUT = 0x8,
- OPAL_EVENT_CONSOLE_INPUT = 0x10
+ OPAL_EVENT_CONSOLE_INPUT = 0x10,
+ OPAL_EVENT_ERROR_LOG_AVAIL = 0x20,
+ OPAL_EVENT_ERROR_LOG = 0x40,
+ OPAL_EVENT_EPOW = 0x80,
+ OPAL_EVENT_LED_STATUS = 0x100
};
/* Machine check related definitions */
@@ -258,13 +270,49 @@
OPAL_MAP_PE = 1
};
+enum OpalPeltvAction {
+ OPAL_REMOVE_PE_FROM_DOMAIN = 0,
+ OPAL_ADD_PE_TO_DOMAIN = 1
+};
+
+enum OpalMveEnableAction {
+ OPAL_DISABLE_MVE = 0,
+ OPAL_ENABLE_MVE = 1
+};
+
enum OpalPciResetAndReinitScope {
OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
- OPAL_PCI_IODA_RESET = 6,
+ OPAL_PCI_IODA_TABLE_RESET = 6,
};
-enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 };
+enum OpalPciResetState {
+ OPAL_DEASSERT_RESET = 0,
+ OPAL_ASSERT_RESET = 1
+};
+
+enum OpalPciMaskAction {
+ OPAL_UNMASK_ERROR_TYPE = 0,
+ OPAL_MASK_ERROR_TYPE = 1
+};
+
+enum OpalSlotLedType {
+ OPAL_SLOT_LED_ID_TYPE = 0,
+ OPAL_SLOT_LED_FAULT_TYPE = 1
+};
+
+enum OpalLedAction {
+ OPAL_TURN_OFF_LED = 0,
+ OPAL_TURN_ON_LED = 1,
+ OPAL_QUERY_LED_STATE_AFTER_BUSY = 2
+};
+
+enum OpalEpowStatus {
+ OPAL_EPOW_NONE = 0,
+ OPAL_EPOW_UPS = 1,
+ OPAL_EPOW_OVER_AMBIENT_TEMP = 2,
+ OPAL_EPOW_OVER_INTERNAL_TEMP = 3
+};
struct opal_machine_check_event {
enum OpalMCE_Version version:8; /* 0x00 */
@@ -314,8 +362,74 @@
} u;
};
+/**
+ * This structure defines the overlay which will be used to store PHB error
+ * data upon request.
+ */
+enum {
+ OPAL_P7IOC_NUM_PEST_REGS = 128,
+};
+
+struct OpalIoP7IOCPhbErrorData {
+ uint32_t brdgCtl;
+
+ // P7IOC utl regs
+ uint32_t portStatusReg;
+ uint32_t rootCmplxStatus;
+ uint32_t busAgentStatus;
+
+ // P7IOC cfg regs
+ uint32_t deviceStatus;
+ uint32_t slotStatus;
+ uint32_t linkStatus;
+ uint32_t devCmdStatus;
+ uint32_t devSecStatus;
+
+ // cfg AER regs
+ uint32_t rootErrorStatus;
+ uint32_t uncorrErrorStatus;
+ uint32_t corrErrorStatus;
+ uint32_t tlpHdr1;
+ uint32_t tlpHdr2;
+ uint32_t tlpHdr3;
+ uint32_t tlpHdr4;
+ uint32_t sourceId;
+
+ uint32_t rsv3;
+
+ // Record data about the call to allocate a buffer.
+ uint64_t errorClass;
+ uint64_t correlator;
+
+ //P7IOC MMIO Error Regs
+ uint64_t p7iocPlssr; // n120
+ uint64_t p7iocCsr; // n110
+ uint64_t lemFir; // nC00
+ uint64_t lemErrorMask; // nC18
+ uint64_t lemWOF; // nC40
+ uint64_t phbErrorStatus; // nC80
+ uint64_t phbFirstErrorStatus; // nC88
+ uint64_t phbErrorLog0; // nCC0
+ uint64_t phbErrorLog1; // nCC8
+ uint64_t mmioErrorStatus; // nD00
+ uint64_t mmioFirstErrorStatus; // nD08
+ uint64_t mmioErrorLog0; // nD40
+ uint64_t mmioErrorLog1; // nD48
+ uint64_t dma0ErrorStatus; // nD80
+ uint64_t dma0FirstErrorStatus; // nD88
+ uint64_t dma0ErrorLog0; // nDC0
+ uint64_t dma0ErrorLog1; // nDC8
+ uint64_t dma1ErrorStatus; // nE00
+ uint64_t dma1FirstErrorStatus; // nE08
+ uint64_t dma1ErrorLog0; // nE40
+ uint64_t dma1ErrorLog1; // nE48
+ uint64_t pestA[OPAL_P7IOC_NUM_PEST_REGS];
+ uint64_t pestB[OPAL_P7IOC_NUM_PEST_REGS];
+};
+
typedef struct oppanel_line {
- /* XXX */
+ const char * line;
+ uint64_t line_len;
} oppanel_line_t;
/* API functions */
@@ -413,6 +527,15 @@
uint64_t pci_mem_size);
int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
+int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer, uint64_t diag_buffer_len);
+int64_t opal_pci_get_phb_diag_data(uint64_t phb_id, void *diag_buffer, uint64_t diag_buffer_len);
+int64_t opal_pci_fence_phb(uint64_t phb_id);
+int64_t opal_pci_reinit(uint64_t phb_id, uint8_t reinit_scope);
+int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action);
+int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action);
+int64_t opal_get_epow_status(uint64_t *status);
+int64_t opal_set_system_attention_led(uint8_t led_action);
+
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 17722c7..269c05a 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -135,6 +135,7 @@
u8 hard_enabled; /* set if irqs are enabled in MSR */
u8 io_sync; /* writel() needs spin_unlock sync */
u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */
+ u8 nap_state_lost; /* NV GPR values lost in power7_idle */
#ifdef CONFIG_PPC_POWERNV
/* Pointer to OPAL machine check event structure set by the
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index dd9c4fd..f072e97 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -92,20 +92,34 @@
#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET)
#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
-#if defined(CONFIG_RELOCATABLE)
+#if defined(CONFIG_NONSTATIC_KERNEL)
#ifndef __ASSEMBLY__
extern phys_addr_t memstart_addr;
extern phys_addr_t kernstart_addr;
+
+#ifdef CONFIG_RELOCATABLE_PPC32
+extern long long virt_phys_offset;
#endif
+
+#endif /* __ASSEMBLY__ */
#define PHYSICAL_START kernstart_addr
-#else
+
+#else /* !CONFIG_NONSTATIC_KERNEL */
#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START)
#endif
+/* See Description below for VIRT_PHYS_OFFSET */
+#ifdef CONFIG_RELOCATABLE_PPC32
+#define VIRT_PHYS_OFFSET virt_phys_offset
+#else
+#define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
+#endif
+
+
#ifdef CONFIG_PPC64
#define MEMORY_START 0UL
-#elif defined(CONFIG_RELOCATABLE)
+#elif defined(CONFIG_NONSTATIC_KERNEL)
#define MEMORY_START memstart_addr
#else
#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
@@ -125,12 +139,77 @@
* determine MEMORY_START until then. However we can determine PHYSICAL_START
* from information at hand (program counter, TLB lookup).
*
+ * On BookE with RELOCATABLE (RELOCATABLE_PPC32)
+ *
+ * With RELOCATABLE_PPC32, we support loading the kernel at any physical
+ * address without any restriction on the page alignment.
+ *
+ * We find the runtime address of _stext and relocate ourselves based on
+ * the following calculation:
+ *
+ * virtual_base = ALIGN_DOWN(KERNELBASE,256M) +
+ * MODULO(_stext.run,256M)
+ * and create the following mapping:
+ *
+ * ALIGN_DOWN(_stext.run,256M) => ALIGN_DOWN(KERNELBASE,256M)
+ *
+ * When we process relocations, we cannot depend on the
+ * existing equation for the __va()/__pa() translations:
+ *
+ * __va(x) = (x) - PHYSICAL_START + KERNELBASE
+ *
+ * Where:
+ * PHYSICAL_START = kernstart_addr = Physical address of _stext
+ * KERNELBASE = Compiled virtual address of _stext.
+ *
+ * This formula holds true iff, kernel load address is TLB page aligned.
+ *
+ * In our case, we need to also account for the shift in the kernel Virtual
+ * address.
+ *
+ * E.g.,
+ *
+ * Let the kernel be loaded at 64MB and KERNELBASE be 0xc0000000 (same as PAGE_OFFSET).
+ * In this case, we would be mapping 0 to 0xc0000000, and kernstart_addr = 64M
+ *
+ * Now __va(1MB) = (0x100000) - (0x4000000) + 0xc0000000
+ * = 0xbc100000 , which is wrong.
+ *
+ * Rather, it should be : 0xc0000000 + 0x100000 = 0xc0100000
+ * according to our mapping.
+ *
+ * Hence we use the following formula to get the translations right:
+ *
+ * __va(x) = (x) - [ PHYSICAL_START - Effective KERNELBASE ]
+ *
+ * Where :
+ * PHYSICAL_START = dynamic load address.(kernstart_addr variable)
+ * Effective KERNELBASE = virtual_base =
+ * = ALIGN_DOWN(KERNELBASE,256M) +
+ * MODULO(PHYSICAL_START,256M)
+ *
+ * To make the cost of __va() / __pa() more light weight, we introduce
+ * a new variable virt_phys_offset, which will hold :
+ *
+ * virt_phys_offset = Effective KERNELBASE - PHYSICAL_START
+ * = ALIGN_DOWN(KERNELBASE,256M) -
+ * ALIGN_DOWN(PHYSICALSTART,256M)
+ *
+ * Hence :
+ *
+ * __va(x) = x - PHYSICAL_START + Effective KERNELBASE
+ * = x + virt_phys_offset
+ *
+ * and
+ * __pa(x) = x + PHYSICAL_START - Effective KERNELBASE
+ * = x - virt_phys_offset
+ *
* On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
* the other definitions for __va & __pa.
*/
#ifdef CONFIG_BOOKE
-#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) - PHYSICAL_START + KERNELBASE))
-#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
+#define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
#else
#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START))
#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
@@ -290,6 +369,7 @@
extern void copy_user_page(void *to, void *from, unsigned long vaddr,
struct page *p);
extern int page_is_ram(unsigned long pfn);
+extern int devmem_is_allowed(unsigned long pfn);
#ifdef CONFIG_PPC_SMLPAR
void arch_free_page(struct page *page, int order);
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index fb40ede..fed85e6 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -130,7 +130,9 @@
#ifdef CONFIG_HUGETLB_PAGE
+#ifdef CONFIG_PPC_MM_SLICES
#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
#endif /* !CONFIG_HUGETLB_PAGE */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 56b879a..882b6aa 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -153,8 +153,8 @@
int pci_ext_config_space; /* for pci devices */
-#ifdef CONFIG_EEH
struct pci_dev *pcidev; /* back-pointer to the pci device */
+#ifdef CONFIG_EEH
int class_code; /* pci device class */
int eeh_mode; /* See eeh.h for possible EEH_MODEs */
int eeh_config_addr;
@@ -164,6 +164,10 @@
int eeh_false_positives; /* # times this device reported #ff's */
u32 config_space[16]; /* saved PCI config space */
#endif
+#define IODA_INVALID_PE (-1)
+#ifdef CONFIG_PPC_POWERNV
+ int pe_number;
+#endif
};
/* Get the pointer to a device_node's pci_dn */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 49c3de5..1c92013 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -184,8 +184,6 @@
extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
-extern int pci_read_irq_line(struct pci_dev *dev);
-
struct file;
extern pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 88b0bd9..2e0e411 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -170,6 +170,9 @@
#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
_PAGE_COHERENT | _PAGE_WRITETHRU))
+#define pgprot_cached_noncoherent(prot) \
+ (__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL))
+
#define pgprot_writecombine pgprot_noncached_wc
struct file;
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index eb11a44..b585bff 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -382,6 +382,9 @@
}
#endif
+extern unsigned long cpuidle_disable;
+enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 559da19..7fdc2c0 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -951,6 +951,7 @@
#define PVR_403GCX 0x00201400
#define PVR_405GP 0x40110000
#define PVR_476 0x11a52000
+#define PVR_476FPE 0x7ff50000
#define PVR_STB03XXX 0x40310000
#define PVR_NP405H 0x41410000
#define PVR_NP405L 0x41610000
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 03c48e8..500fe1d 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -187,6 +187,10 @@
#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */
#endif
+#ifdef CONFIG_PPC_ICSWX
+#define SPRN_HACOP 0x15F /* Hypervisor Available Coprocessor Register */
+#endif
+
/* Bit definitions for CCR1. */
#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
#define CCR1_TCS 0x00000080 /* Timer Clock Select */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 41f69ae..01c143b 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -245,6 +245,12 @@
extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+#ifdef CONFIG_PPC_RTAS_DAEMON
+extern void rtas_cancel_event_scan(void);
+#else
+static inline void rtas_cancel_event_scan(void) { }
+#endif
+
/* Error types logged. */
#define ERR_FLAG_ALREADY_LOGGED 0x0
#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */
@@ -307,5 +313,17 @@
extern void __cpuinit rtas_give_timebase(void);
extern void __cpuinit rtas_take_timebase(void);
+#ifdef CONFIG_PPC_RTAS
+static inline int page_is_rtas_user_buf(unsigned long pfn)
+{
+ unsigned long paddr = (pfn << PAGE_SHIFT);
+ if (paddr >= rtas_rmo_buf && paddr < (rtas_rmo_buf + RTAS_RMOBUF_MAX))
+ return 1;
+ return 0;
+}
+#else
+static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;}
+#endif
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h
deleted file mode 100644
index bb1e2cd..0000000
--- a/arch/powerpc/include/asm/rwsem.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _ASM_POWERPC_RWSEM_H
-#define _ASM_POWERPC_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
-#endif
-
-#ifdef __KERNEL__
-
-/*
- * R/W semaphores for PPC using the stuff in lib/rwsem.c.
- * Adapted largely from include/asm-i386/rwsem.h
- * by Paul Mackerras <paulus@samba.org>.
- */
-
-/*
- * the semaphore definition
- */
-#ifdef CONFIG_PPC64
-# define RWSEM_ACTIVE_MASK 0xffffffffL
-#else
-# define RWSEM_ACTIVE_MASK 0x0000ffffL
-#endif
-
-#define RWSEM_UNLOCKED_VALUE 0x00000000L
-#define RWSEM_ACTIVE_BIAS 0x00000001L
-#define RWSEM_WAITING_BIAS (-RWSEM_ACTIVE_MASK-1)
-#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
- if (unlikely(atomic_long_inc_return((atomic_long_t *)&sem->count) <= 0))
- rwsem_down_read_failed(sem);
-}
-
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
- long tmp;
-
- while ((tmp = sem->count) >= 0) {
- if (tmp == cmpxchg(&sem->count, tmp,
- tmp + RWSEM_ACTIVE_READ_BIAS)) {
- return 1;
- }
- }
- return 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
- long tmp;
-
- tmp = atomic_long_add_return(RWSEM_ACTIVE_WRITE_BIAS,
- (atomic_long_t *)&sem->count);
- if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
- rwsem_down_write_failed(sem);
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
- __down_write_nested(sem, 0);
-}
-
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
- long tmp;
-
- tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
- RWSEM_ACTIVE_WRITE_BIAS);
- return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
- long tmp;
-
- tmp = atomic_long_dec_return((atomic_long_t *)&sem->count);
- if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
- rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
- if (unlikely(atomic_long_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
- (atomic_long_t *)&sem->count) < 0))
- rwsem_wake(sem);
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
-{
- atomic_long_add(delta, (atomic_long_t *)&sem->count);
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
- long tmp;
-
- tmp = atomic_long_add_return(-RWSEM_WAITING_BIAS,
- (atomic_long_t *)&sem->count);
- if (tmp < 0)
- rwsem_downgrade_wake(sem);
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
-{
- return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_RWSEM_H */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 866f760..2fc2af8 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -69,4 +69,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
index 4e360bd..93f280e 100644
--- a/arch/powerpc/include/asm/spu.h
+++ b/arch/powerpc/include/asm/spu.h
@@ -25,7 +25,7 @@
#ifdef __KERNEL__
#include <linux/workqueue.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/mutex.h>
#define LS_SIZE (256 * 1024)
@@ -166,7 +166,7 @@
/* beat only */
u64 shadow_int_mask_RW[3];
- struct sys_device sysdev;
+ struct device dev;
int has_mem_affinity;
struct list_head aff_list;
@@ -237,7 +237,7 @@
struct file;
struct spufs_calls {
long (*create_thread)(const char __user *name,
- unsigned int flags, mode_t mode,
+ unsigned int flags, umode_t mode,
struct file *neighbor);
long (*spu_run)(struct file *filp, __u32 __user *unpc,
__u32 __user *ustatus);
@@ -270,11 +270,11 @@
int register_spu_syscalls(struct spufs_calls *calls);
void unregister_spu_syscalls(struct spufs_calls *calls);
-int spu_add_sysdev_attr(struct sysdev_attribute *attr);
-void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
+int spu_add_dev_attr(struct device_attribute *attr);
+void spu_remove_dev_attr(struct device_attribute *attr);
-int spu_add_sysdev_attr_group(struct attribute_group *attrs);
-void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
+int spu_add_dev_attr_group(struct attribute_group *attrs);
+void spu_remove_dev_attr_group(struct attribute_group *attrs);
int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
unsigned long dsisr, unsigned *flt);
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index e30a13d..c377457 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -193,8 +193,8 @@
extern void *cacheable_memcpy(void *, const void *, unsigned int);
extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
extern void bad_page_fault(struct pt_regs *, unsigned long, int);
-extern int die(const char *, struct pt_regs *, long);
extern void _exception(int, struct pt_regs *, int, unsigned long);
+extern void die(const char *, struct pt_regs *, long);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
#ifdef CONFIG_BOOKE_WDT
@@ -221,6 +221,15 @@
extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
extern int powersave_nap; /* set if nap mode can be used in idle loop */
+void cpu_idle_wait(void);
+
+#ifdef CONFIG_PSERIES_IDLE
+extern void update_smt_snooze_delay(int snooze);
+extern int pseries_notify_cpuidle_add_cpu(int cpu);
+#else
+static inline void update_smt_snooze_delay(int snooze) {}
+static inline int pseries_notify_cpuidle_add_cpu(int cpu) { return 0; }
+#endif
/*
* Atomic exchange
diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h
index f663634..743f36b 100644
--- a/arch/powerpc/include/asm/tce.h
+++ b/arch/powerpc/include/asm/tce.h
@@ -26,10 +26,14 @@
/*
* Tces come in two formats, one for the virtual bus and a different
- * format for PCI
+ * format for PCI. PCI TCEs can have hardware or software maintianed
+ * coherency.
*/
-#define TCE_VB 0
-#define TCE_PCI 1
+#define TCE_VB 0
+#define TCE_PCI 1
+#define TCE_PCI_SWINV_CREATE 2
+#define TCE_PCI_SWINV_FREE 4
+#define TCE_PCI_SWINV_PAIR 8
/* TCE page size is 4096 bytes (1 << 12) */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 836f231..96471494 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -109,7 +109,6 @@
#define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */
#define TIF_NOERROR 12 /* Force successful syscall return */
#define TIF_NOTIFY_RESUME 13 /* callback before returning to user */
-#define TIF_FREEZE 14 /* Freezing for suspend */
#define TIF_SYSCALL_TRACEPOINT 15 /* syscall tracepoint instrumentation */
#define TIF_RUNLATCH 16 /* Is the runlatch enabled? */
@@ -127,7 +126,6 @@
#define _TIF_RESTOREALL (1<<TIF_RESTOREALL)
#define _TIF_NOERROR (1<<TIF_NOERROR)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
#define _TIF_RUNLATCH (1<<TIF_RUNLATCH)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index fe6f7c2..7eb10fb 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -219,5 +219,7 @@
extern void secondary_cpu_time_init(void);
extern void iSeries_time_init_early(void);
+DECLARE_PER_CPU(u64, decrementers_next_tb);
+
#endif /* __KERNEL__ */
#endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 1e104af..c971858 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -3,7 +3,7 @@
#ifdef __KERNEL__
-struct sys_device;
+struct device;
struct device_node;
#ifdef CONFIG_NUMA
@@ -86,19 +86,19 @@
extern void __init dump_numa_cpu_topology(void);
-extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
-extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
+extern int sysfs_add_device_to_node(struct device *dev, int nid);
+extern void sysfs_remove_device_from_node(struct device *dev, int nid);
#else
static inline void dump_numa_cpu_topology(void) {}
-static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+static inline int sysfs_add_device_to_node(struct device *dev, int nid)
{
return 0;
}
-static inline void sysfs_remove_device_from_node(struct sys_device *dev,
+static inline void sysfs_remove_device_from_node(struct device *dev,
int nid)
{
}
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index 8947b98..0abf7f2 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -5,8 +5,11 @@
* This is here because we used to use l64 for 64bit powerpc
* and we don't want to impact user mode with our change to ll64
* in the kernel.
+ *
+ * However, some user programs are fine with this. They can
+ * flag __SANE_USERSPACE_TYPES__ to get int-ll64.h here.
*/
-#if defined(__powerpc64__) && !defined(__KERNEL__)
+#if !defined(__SANE_USERSPACE_TYPES__) && defined(__powerpc64__) && !defined(__KERNEL__)
# include <asm-generic/int-l64.h>
#else
# include <asm-generic/int-ll64.h>
@@ -27,12 +30,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#ifdef __powerpc64__
-typedef unsigned int umode_t;
-#else
-typedef unsigned short umode_t;
-#endif
-
typedef struct {
__u32 u[4];
} __attribute__((aligned(16))) __vector128;
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index ce4f7f1..ee728e4 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -85,6 +85,8 @@
extra-$(CONFIG_8xx) := head_8xx.o
extra-y += vmlinux.lds
+obj-$(CONFIG_RELOCATABLE_PPC32) += reloc_32.o
+
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 7c5324f..04caee7 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -208,6 +208,7 @@
DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
+ DEFINE(PACA_NAPSTATELOST, offsetof(struct paca_struct, nap_state_lost));
#endif /* CONFIG_PPC64 */
/* RTAS */
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index a3c684b..92c6b00 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -451,15 +451,15 @@
static struct cache_dir *__cpuinit cacheinfo_create_cache_dir(unsigned int cpu_id)
{
struct cache_dir *cache_dir;
- struct sys_device *sysdev;
+ struct device *dev;
struct kobject *kobj = NULL;
- sysdev = get_cpu_sysdev(cpu_id);
- WARN_ONCE(!sysdev, "no sysdev for CPU %i\n", cpu_id);
- if (!sysdev)
+ dev = get_cpu_device(cpu_id);
+ WARN_ONCE(!dev, "no dev for CPU %i\n", cpu_id);
+ if (!dev)
goto err;
- kobj = kobject_create_and_add("cache", &sysdev->kobj);
+ kobj = kobject_create_and_add("cache", &dev->kobj);
if (!kobj)
goto err;
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
index 7f818fe..ebc62f4 100644
--- a/arch/powerpc/kernel/cpu_setup_a2.S
+++ b/arch/powerpc/kernel/cpu_setup_a2.S
@@ -41,11 +41,16 @@
* core local but doing it always won't hurt
*/
-#ifdef CONFIG_PPC_WSP_COPRO
+#ifdef CONFIG_PPC_ICSWX
/* Make sure ACOP starts out as zero */
li r3,0
mtspr SPRN_ACOP,r3
+ /* Skip the following if we are in Guest mode */
+ mfmsr r3
+ andis. r0,r3,MSR_GS@h
+ bne _icswx_skip_guest
+
/* Enable icswx instruction */
mfspr r3,SPRN_A2_CCR2
ori r3,r3,A2_CCR2_ENABLE_ICSWX
@@ -54,7 +59,8 @@
/* Unmask all CTs in HACOP */
li r3,-1
mtspr SPRN_HACOP,r3
-#endif /* CONFIG_PPC_WSP_COPRO */
+_icswx_skip_guest:
+#endif /* CONFIG_PPC_ICSWX */
/* Enable doorbell */
mfspr r3,SPRN_A2_CCR2
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index edae5bb..81db9e2 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1505,6 +1505,19 @@
.machine_check = machine_check_4xx,
.platform = "ppc405",
},
+ { /* APM8018X */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x7ff11432,
+ .cpu_name = "APM8018X",
+ .cpu_features = CPU_FTRS_40X,
+ .cpu_user_features = PPC_FEATURE_32 |
+ PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .machine_check = machine_check_4xx,
+ .platform = "ppc405",
+ },
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
@@ -1830,6 +1843,20 @@
.machine_check = machine_check_47x,
.platform = "ppc470",
},
+ { /* 476fpe */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x7ff50000,
+ .cpu_name = "476fpe",
+ .cpu_features = CPU_FTRS_47X | CPU_FTR_476_DD2,
+ .cpu_user_features = COMMON_USER_BOOKE |
+ PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_47x |
+ MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+ .icache_bsize = 32,
+ .dcache_bsize = 128,
+ .machine_check = machine_check_47x,
+ .platform = "ppc470",
+ },
{ /* 476 iss */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00050000,
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index d879809..28be345 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -10,85 +10,85 @@
*
*/
-#undef DEBUG
-
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/reboot.h>
#include <linux/kexec.h>
-#include <linux/bootmem.h>
#include <linux/export.h>
#include <linux/crash_dump.h>
#include <linux/delay.h>
-#include <linux/elf.h>
-#include <linux/elfcore.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
-#include <linux/memblock.h>
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/kexec.h>
#include <asm/kdump.h>
#include <asm/prom.h>
-#include <asm/firmware.h>
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/setjmp.h>
-#ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
+/*
+ * The primary CPU waits a while for all secondary CPUs to enter. This is to
+ * avoid sending an IPI if the secondary CPUs are entering
+ * crash_kexec_secondary on their own (eg via a system reset).
+ *
+ * The secondary timeout has to be longer than the primary. Both timeouts are
+ * in milliseconds.
+ */
+#define PRIMARY_TIMEOUT 500
+#define SECONDARY_TIMEOUT 1000
-/* This keeps a track of which one is crashing cpu. */
+#define IPI_TIMEOUT 10000
+#define REAL_MODE_TIMEOUT 10000
+
+/* This keeps a track of which one is the crashing cpu. */
int crashing_cpu = -1;
-static cpumask_t cpus_in_crash = CPU_MASK_NONE;
-cpumask_t cpus_in_sr = CPU_MASK_NONE;
+static atomic_t cpus_in_crash;
+static int time_to_dump;
#define CRASH_HANDLER_MAX 3
/* NULL terminated list of shutdown handles */
static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1];
static DEFINE_SPINLOCK(crash_handlers_lock);
+static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
+static int crash_shutdown_cpu = -1;
+
+static int handle_fault(struct pt_regs *regs)
+{
+ if (crash_shutdown_cpu == smp_processor_id())
+ longjmp(crash_shutdown_buf, 1);
+ return 0;
+}
+
#ifdef CONFIG_SMP
-static atomic_t enter_on_soft_reset = ATOMIC_INIT(0);
void crash_ipi_callback(struct pt_regs *regs)
{
+ static cpumask_t cpus_state_saved = CPU_MASK_NONE;
+
int cpu = smp_processor_id();
if (!cpu_online(cpu))
return;
hard_irq_disable();
- if (!cpumask_test_cpu(cpu, &cpus_in_crash))
+ if (!cpumask_test_cpu(cpu, &cpus_state_saved)) {
crash_save_cpu(regs, cpu);
- cpumask_set_cpu(cpu, &cpus_in_crash);
-
- /*
- * Entered via soft-reset - could be the kdump
- * process is invoked using soft-reset or user activated
- * it if some CPU did not respond to an IPI.
- * For soft-reset, the secondary CPU can enter this func
- * twice. 1 - using IPI, and 2. soft-reset.
- * Tell the kexec CPU that entered via soft-reset and ready
- * to go down.
- */
- if (cpumask_test_cpu(cpu, &cpus_in_sr)) {
- cpumask_clear_cpu(cpu, &cpus_in_sr);
- atomic_inc(&enter_on_soft_reset);
+ cpumask_set_cpu(cpu, &cpus_state_saved);
}
+ atomic_inc(&cpus_in_crash);
+ smp_mb__after_atomic_inc();
+
/*
* Starting the kdump boot.
* This barrier is needed to make sure that all CPUs are stopped.
- * If not, soft-reset will be invoked to bring other CPUs.
*/
- while (!cpumask_test_cpu(crashing_cpu, &cpus_in_crash))
+ while (!time_to_dump)
cpu_relax();
if (ppc_md.kexec_cpu_down)
@@ -103,106 +103,99 @@
/* NOTREACHED */
}
-/*
- * Wait until all CPUs are entered via soft-reset.
- */
-static void crash_soft_reset_check(int cpu)
-{
- unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
-
- cpumask_clear_cpu(cpu, &cpus_in_sr);
- while (atomic_read(&enter_on_soft_reset) != ncpus)
- cpu_relax();
-}
-
-
static void crash_kexec_prepare_cpus(int cpu)
{
unsigned int msecs;
-
unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+ int tries = 0;
+ int (*old_handler)(struct pt_regs *regs);
+
+ printk(KERN_EMERG "Sending IPI to other CPUs\n");
crash_send_ipi(crash_ipi_callback);
smp_wmb();
+again:
/*
* FIXME: Until we will have the way to stop other CPUs reliably,
* the crash CPU will send an IPI and wait for other CPUs to
* respond.
- * Delay of at least 10 seconds.
*/
- printk(KERN_EMERG "Sending IPI to other cpus...\n");
- msecs = 10000;
- while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) {
- cpu_relax();
+ msecs = IPI_TIMEOUT;
+ while ((atomic_read(&cpus_in_crash) < ncpus) && (--msecs > 0))
mdelay(1);
- }
/* Would it be better to replace the trap vector here? */
+ if (atomic_read(&cpus_in_crash) >= ncpus) {
+ printk(KERN_EMERG "IPI complete\n");
+ return;
+ }
+
+ printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n",
+ ncpus - atomic_read(&cpus_in_crash));
+
/*
- * FIXME: In case if we do not get all CPUs, one possibility: ask the
- * user to do soft reset such that we get all.
- * Soft-reset will be used until better mechanism is implemented.
+ * If we have a panic timeout set then we can't wait indefinitely
+ * for someone to activate system reset. We also give up on the
+ * second time through if system reset fail to work.
*/
- if (cpumask_weight(&cpus_in_crash) < ncpus) {
- printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",
- ncpus - cpumask_weight(&cpus_in_crash));
- printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");
- cpumask_clear(&cpus_in_sr);
- atomic_set(&enter_on_soft_reset, 0);
- while (cpumask_weight(&cpus_in_crash) < ncpus)
+ if ((panic_timeout > 0) || (tries > 0))
+ return;
+
+ /*
+ * A system reset will cause all CPUs to take an 0x100 exception.
+ * The primary CPU returns here via setjmp, and the secondary
+ * CPUs reexecute the crash_kexec_secondary path.
+ */
+ old_handler = __debugger;
+ __debugger = handle_fault;
+ crash_shutdown_cpu = smp_processor_id();
+
+ if (setjmp(crash_shutdown_buf) == 0) {
+ printk(KERN_EMERG "Activate system reset (dumprestart) "
+ "to stop other cpu(s)\n");
+
+ /*
+ * A system reset will force all CPUs to execute the
+ * crash code again. We need to reset cpus_in_crash so we
+ * wait for everyone to do this.
+ */
+ atomic_set(&cpus_in_crash, 0);
+ smp_mb();
+
+ while (atomic_read(&cpus_in_crash) < ncpus)
cpu_relax();
}
- /*
- * Make sure all CPUs are entered via soft-reset if the kdump is
- * invoked using soft-reset.
- */
- if (cpumask_test_cpu(cpu, &cpus_in_sr))
- crash_soft_reset_check(cpu);
- /* Leave the IPI callback set */
+
+ crash_shutdown_cpu = -1;
+ __debugger = old_handler;
+
+ tries++;
+ goto again;
}
/*
- * This function will be called by secondary cpus or by kexec cpu
- * if soft-reset is activated to stop some CPUs.
+ * This function will be called by secondary cpus.
*/
void crash_kexec_secondary(struct pt_regs *regs)
{
- int cpu = smp_processor_id();
unsigned long flags;
- int msecs = 5;
+ int msecs = SECONDARY_TIMEOUT;
local_irq_save(flags);
- /* Wait 5ms if the kexec CPU is not entered yet. */
+
+ /* Wait for the primary crash CPU to signal its progress */
while (crashing_cpu < 0) {
if (--msecs < 0) {
- /*
- * Either kdump image is not loaded or
- * kdump process is not started - Probably xmon
- * exited using 'x'(exit and recover) or
- * kexec_should_crash() failed for all running tasks.
- */
- cpumask_clear_cpu(cpu, &cpus_in_sr);
+ /* No response, kdump image may not have been loaded */
local_irq_restore(flags);
return;
}
+
mdelay(1);
- cpu_relax();
}
- if (cpu == crashing_cpu) {
- /*
- * Panic CPU will enter this func only via soft-reset.
- * Wait until all secondary CPUs entered and
- * then start kexec boot.
- */
- crash_soft_reset_check(cpu);
- cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
- if (ppc_md.kexec_cpu_down)
- ppc_md.kexec_cpu_down(1, 0);
- machine_kexec(kexec_crash_image);
- /* NOTREACHED */
- }
+
crash_ipi_callback(regs);
}
@@ -211,7 +204,7 @@
static void crash_kexec_prepare_cpus(int cpu)
{
/*
- * move the secondarys to us so that we can copy
+ * move the secondaries to us so that we can copy
* the new kernel 0-0x100 safely
*
* do this if kexec in setup.c ?
@@ -225,7 +218,6 @@
void crash_kexec_secondary(struct pt_regs *regs)
{
- cpumask_clear(&cpus_in_sr);
}
#endif /* CONFIG_SMP */
@@ -236,7 +228,7 @@
unsigned int msecs;
int i;
- msecs = 10000;
+ msecs = REAL_MODE_TIMEOUT;
for (i=0; i < nr_cpu_ids && msecs > 0; i++) {
if (i == cpu)
continue;
@@ -308,22 +300,11 @@
}
EXPORT_SYMBOL(crash_shutdown_unregister);
-static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
-static int crash_shutdown_cpu = -1;
-
-static int handle_fault(struct pt_regs *regs)
-{
- if (crash_shutdown_cpu == smp_processor_id())
- longjmp(crash_shutdown_buf, 1);
- return 0;
-}
-
void default_machine_crash_shutdown(struct pt_regs *regs)
{
unsigned int i;
int (*old_handler)(struct pt_regs *regs);
-
/*
* This function is only called after the system
* has panicked or is otherwise in a critical state.
@@ -341,15 +322,26 @@
* such that another IPI will not be sent.
*/
crashing_cpu = smp_processor_id();
- crash_save_cpu(regs, crashing_cpu);
+
+ /*
+ * If we came in via system reset, wait a while for the secondary
+ * CPUs to enter.
+ */
+ if (TRAP(regs) == 0x100)
+ mdelay(PRIMARY_TIMEOUT);
+
crash_kexec_prepare_cpus(crashing_cpu);
- cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
+
+ crash_save_cpu(regs, crashing_cpu);
+
+ time_to_dump = 1;
+
crash_kexec_wait_realmode(crashing_cpu);
machine_kexec_mask_interrupts();
/*
- * Call registered shutdown routines savely. Swap out
+ * Call registered shutdown routines safely. Swap out
* __debugger_fault_handler, and replace on exit.
*/
old_handler = __debugger_fault_handler;
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 424afb6..b3ba516 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -28,7 +28,7 @@
#define DBG(fmt...)
#endif
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
void __init reserve_kdump_trampoline(void)
{
memblock_reserve(0, KDUMP_RESERVE_LIMIT);
@@ -67,7 +67,7 @@
DBG(" <- setup_kdump_trampoline()\n");
}
-#endif /* CONFIG_RELOCATABLE */
+#endif /* CONFIG_NONSTATIC_KERNEL */
static int __init parse_savemaxmem(char *p)
{
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index cf9c69b..d4be7bb 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -65,7 +65,7 @@
lbz r0,PACAPROCSTART(r13)
cmpwi r0,0x80
bne 1f
- li r0,0
+ li r0,1
stb r0,PACAPROCSTART(r13)
b kvm_start_guest
1:
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b725dab..7dd2981 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -64,6 +64,35 @@
mr r31,r3 /* save device tree ptr */
li r24,0 /* CPU number */
+#ifdef CONFIG_RELOCATABLE
+/*
+ * Relocate ourselves to the current runtime address.
+ * This is called only by the Boot CPU.
+ * "relocate" is called with our current runtime virutal
+ * address.
+ * r21 will be loaded with the physical runtime address of _stext
+ */
+ bl 0f /* Get our runtime address */
+0: mflr r21 /* Make it accessible */
+ addis r21,r21,(_stext - 0b)@ha
+ addi r21,r21,(_stext - 0b)@l /* Get our current runtime base */
+
+ /*
+ * We have the runtime (virutal) address of our base.
+ * We calculate our shift of offset from a 256M page.
+ * We could map the 256M page we belong to at PAGE_OFFSET and
+ * get going from there.
+ */
+ lis r4,KERNELBASE@h
+ ori r4,r4,KERNELBASE@l
+ rlwinm r6,r21,0,4,31 /* r6 = PHYS_START % 256M */
+ rlwinm r5,r4,0,4,31 /* r5 = KERNELBASE % 256M */
+ subf r3,r5,r6 /* r3 = r6 - r5 */
+ add r3,r4,r3 /* Required Virutal Address */
+
+ bl relocate
+#endif
+
bl init_cpu_state
/*
@@ -88,6 +117,65 @@
#ifdef CONFIG_RELOCATABLE
/*
+ * Relocatable kernel support based on processing of dynamic
+ * relocation entries.
+ *
+ * r25 will contain RPN/ERPN for the start address of memory
+ * r21 will contain the current offset of _stext
+ */
+ lis r3,kernstart_addr@ha
+ la r3,kernstart_addr@l(r3)
+
+ /*
+ * Compute the kernstart_addr.
+ * kernstart_addr => (r6,r8)
+ * kernstart_addr & ~0xfffffff => (r6,r7)
+ */
+ rlwinm r6,r25,0,28,31 /* ERPN. Bits 32-35 of Address */
+ rlwinm r7,r25,0,0,3 /* RPN - assuming 256 MB page size */
+ rlwinm r8,r21,0,4,31 /* r8 = (_stext & 0xfffffff) */
+ or r8,r7,r8 /* Compute the lower 32bit of kernstart_addr */
+
+ /* Store kernstart_addr */
+ stw r6,0(r3) /* higher 32bit */
+ stw r8,4(r3) /* lower 32bit */
+
+ /*
+ * Compute the virt_phys_offset :
+ * virt_phys_offset = stext.run - kernstart_addr
+ *
+ * stext.run = (KERNELBASE & ~0xfffffff) + (kernstart_addr & 0xfffffff)
+ * When we relocate, we have :
+ *
+ * (kernstart_addr & 0xfffffff) = (stext.run & 0xfffffff)
+ *
+ * hence:
+ * virt_phys_offset = (KERNELBASE & ~0xfffffff) - (kernstart_addr & ~0xfffffff)
+ *
+ */
+
+ /* KERNELBASE&~0xfffffff => (r4,r5) */
+ li r4, 0 /* higer 32bit */
+ lis r5,KERNELBASE@h
+ rlwinm r5,r5,0,0,3 /* Align to 256M, lower 32bit */
+
+ /*
+ * 64bit subtraction.
+ */
+ subfc r5,r7,r5
+ subfe r4,r6,r4
+
+ /* Store virt_phys_offset */
+ lis r3,virt_phys_offset@ha
+ la r3,virt_phys_offset@l(r3)
+
+ stw r4,0(r3)
+ stw r5,4(r3)
+
+#elif defined(CONFIG_DYNAMIC_MEMSTART)
+ /*
+ * Mapping based, page aligned dynamic kernel loading.
+ *
* r25 will contain RPN/ERPN for the start address of memory
*
* Add the difference between KERNELBASE and PAGE_OFFSET to the
@@ -732,6 +820,8 @@
/* We use the PVR to differenciate 44x cores from 476 */
mfspr r3,SPRN_PVR
srwi r3,r3,16
+ cmplwi cr0,r3,PVR_476FPE@h
+ beq head_start_47x
cmplwi cr0,r3,PVR_476@h
beq head_start_47x
cmplwi cr0,r3,PVR_476_ISS@h
@@ -800,12 +890,29 @@
/*
* Configure and load pinned entry into TLB slot 63.
*/
+#ifdef CONFIG_NONSTATIC_KERNEL
+ /*
+ * In case of a NONSTATIC_KERNEL we reuse the TLB XLAT
+ * entries of the initial mapping set by the boot loader.
+ * The XLAT entry is stored in r25
+ */
+
+ /* Read the XLAT entry for our current mapping */
+ tlbre r25,r23,PPC44x_TLB_XLAT
+
+ lis r3,KERNELBASE@h
+ ori r3,r3,KERNELBASE@l
+
+ /* Use our current RPN entry */
+ mr r4,r25
+#else
lis r3,PAGE_OFFSET@h
ori r3,r3,PAGE_OFFSET@l
/* Kernel is at the base of RAM */
li r4, 0 /* Load the kernel physical address */
+#endif
/* Load the kernel PID = 0 */
li r0,0
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 9f5d210..d5d78c4 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -197,7 +197,7 @@
bl early_init
-#ifdef CONFIG_RELOCATABLE
+#ifdef CONFIG_DYNAMIC_MEMSTART
lis r3,kernstart_addr@ha
la r3,kernstart_addr@l(r3)
#ifdef CONFIG_PHYS_64BIT
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 39a2baa..7c66ce1 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -39,13 +39,23 @@
#define cpu_should_die() 0
#endif
+unsigned long cpuidle_disable = IDLE_NO_OVERRIDE;
+EXPORT_SYMBOL(cpuidle_disable);
+
static int __init powersave_off(char *arg)
{
ppc_md.power_save = NULL;
+ cpuidle_disable = IDLE_POWERSAVE_OFF;
return 0;
}
__setup("powersave=off", powersave_off);
+#if defined(CONFIG_PPC_PSERIES) && defined(CONFIG_TRACEPOINTS)
+static const bool idle_uses_rcu = 1;
+#else
+static const bool idle_uses_rcu;
+#endif
+
/*
* The body of the idle task.
*/
@@ -56,7 +66,10 @@
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ if (!idle_uses_rcu)
+ rcu_idle_enter();
+
while (!need_resched() && !cpu_should_die()) {
ppc64_runlatch_off();
@@ -93,7 +106,9 @@
HMT_medium();
ppc64_runlatch_on();
- tick_nohz_restart_sched_tick();
+ if (!idle_uses_rcu)
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
if (cpu_should_die())
cpu_die();
@@ -102,6 +117,29 @@
}
}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs come out of the old
+ * idle loop and start using the new idle loop.
+ * Required while changing idle handler on SMP systems.
+ * Caller must have changed idle handler to the new value before the call.
+ * This window may be larger on shared systems.
+ */
+void cpu_idle_wait(void)
+{
+ int cpu;
+ smp_mb();
+
+ /* kick all the CPUs so that they exit out of old idle routine */
+ get_online_cpus();
+ for_each_online_cpu(cpu) {
+ if (cpu != smp_processor_id())
+ smp_send_reschedule(cpu);
+ }
+ put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
+
int powersave_nap;
#ifdef CONFIG_SYSCTL
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 3a70845..fcdff19 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -54,6 +54,7 @@
li r0,0
stb r0,PACASOFTIRQEN(r13) /* we'll hard-enable shortly */
stb r0,PACAHARDIRQEN(r13)
+ stb r0,PACA_NAPSTATELOST(r13)
/* Continue saving state */
SAVE_GPR(2, r1)
@@ -86,6 +87,9 @@
rfid
_GLOBAL(power7_wakeup_noloss)
+ lbz r0,PACA_NAPSTATELOST(r13)
+ cmpwi r0,0
+ bne .power7_wakeup_loss
ld r1,PACAR1(r13)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 5c3c469..701d4ac 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -115,6 +115,15 @@
: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
}
+static inline notrace void decrementer_check_overflow(void)
+{
+ u64 now = get_tb_or_rtc();
+ u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+
+ if (now >= *next_tb)
+ set_dec(1);
+}
+
notrace void arch_local_irq_restore(unsigned long en)
{
/*
@@ -164,24 +173,21 @@
*/
local_paca->hard_enabled = en;
-#ifndef CONFIG_BOOKE
- /* On server, re-trigger the decrementer if it went negative since
- * some processors only trigger on edge transitions of the sign bit.
- *
- * BookE has a level sensitive decrementer (latches in TSR) so we
- * don't need that
+ /*
+ * Trigger the decrementer if we have a pending event. Some processors
+ * only trigger on edge transitions of the sign bit. We might also
+ * have disabled interrupts long enough that the decrementer wrapped
+ * to positive.
*/
- if ((int)mfspr(SPRN_DEC) < 0)
- mtspr(SPRN_DEC, 1);
-#endif /* CONFIG_BOOKE */
+ decrementer_check_overflow();
/*
* Force the delivery of pending soft-disabled interrupts on PS3.
* Any HV call will have this side effect.
*/
if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
- u64 tmp;
- lv1_get_version_info(&tmp);
+ u64 tmp, tmp2;
+ lv1_get_version_info(&tmp, &tmp2);
}
__hard_irq_enable();
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 84daabe..578f35f 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -783,7 +783,7 @@
static int __init lparcfg_init(void)
{
struct proc_dir_entry *ent;
- mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
+ umode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
/* Allow writing if we have FW_FEATURE_SPLPAR */
if (firmware_has_feature(FW_FEATURE_SPLPAR) &&
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 9ce1672..c957b12 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -107,9 +107,6 @@
unsigned long long crash_size, crash_base;
int ret;
- /* this is necessary because of memblock_phys_mem_size() */
- memblock_analyze();
-
/* use common parsing */
ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
&crash_size, &crash_base);
@@ -128,7 +125,7 @@
crash_size = resource_size(&crashk_res);
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
if (crashk_res.start != KDUMP_KERNELBASE)
printk("Crash kernel location must be 0x%x\n",
KDUMP_KERNELBASE);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 458ed3b..fa4a573 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -214,7 +214,7 @@
* If the interrupt is used, then gets the interrupt line from the
* openfirmware and sets it in the pci_dev and pci_config line.
*/
-int pci_read_irq_line(struct pci_dev *pci_dev)
+static int pci_read_irq_line(struct pci_dev *pci_dev)
{
struct of_irq oirq;
unsigned int virq;
@@ -283,7 +283,6 @@
return 0;
}
-EXPORT_SYMBOL(pci_read_irq_line);
/*
* Platform support for /proc/bus/pci/X/Y mmap()s,
@@ -921,18 +920,22 @@
struct resource *res = dev->resource + i;
if (!res->flags)
continue;
- /* On platforms that have PCI_PROBE_ONLY set, we don't
- * consider 0 as an unassigned BAR value. It's technically
- * a valid value, but linux doesn't like it... so when we can
- * re-assign things, we do so, but if we can't, we keep it
- * around and hope for the best...
+
+ /* If we're going to re-assign everything, we mark all resources
+ * as unset (and 0-base them). In addition, we mark BARs starting
+ * at 0 as unset as well, except if PCI_PROBE_ONLY is also set
+ * since in that case, we don't want to re-assign anything
*/
- if (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY)) {
- pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n",
- pci_name(dev), i,
- (unsigned long long)res->start,
- (unsigned long long)res->end,
- (unsigned int)res->flags);
+ if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) ||
+ (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
+ /* Only print message if not re-assigning */
+ if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
+ pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] "
+ "is unassigned\n",
+ pci_name(dev), i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned int)res->flags);
res->end -= res->start;
res->start = 0;
res->flags |= IORESOURCE_UNSET;
@@ -1042,6 +1045,16 @@
if (i >= 3 && bus->self->transparent)
continue;
+ /* If we are going to re-assign everything, mark the resource
+ * as unset and move it down to 0
+ */
+ if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
+ res->flags |= IORESOURCE_UNSET;
+ res->end -= res->start;
+ res->start = 0;
+ continue;
+ }
+
pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
pci_name(dev), i,
(unsigned long long)res->start,\
@@ -1262,18 +1275,15 @@
pci_bus_for_each_resource(bus, res, i) {
if (!res || !res->flags || res->start > res->end || res->parent)
continue;
+
+ /* If the resource was left unset at this point, we clear it */
+ if (res->flags & IORESOURCE_UNSET)
+ goto clear_resource;
+
if (bus->parent == NULL)
pr = (res->flags & IORESOURCE_IO) ?
&ioport_resource : &iomem_resource;
else {
- /* Don't bother with non-root busses when
- * re-assigning all resources. We clear the
- * resource flags as if they were colliding
- * and as such ensure proper re-allocation
- * later.
- */
- if (pci_has_flag(PCI_REASSIGN_ALL_RSRC))
- goto clear_resource;
pr = pci_find_parent_resource(bus->self, res);
if (pr == res) {
/* this happens when the generic PCI
@@ -1304,9 +1314,9 @@
if (reparent_resources(pr, res) == 0)
continue;
}
- printk(KERN_WARNING "PCI: Cannot allocate resource region "
- "%d of PCI bridge %d, will remap\n", i, bus->number);
-clear_resource:
+ pr_warning("PCI: Cannot allocate resource region "
+ "%d of PCI bridge %d, will remap\n", i, bus->number);
+ clear_resource:
res->start = res->end = 0;
res->flags = 0;
}
@@ -1451,16 +1461,11 @@
{
struct pci_bus *b;
- /* Allocate and assign resources. If we re-assign everything, then
- * we skip the allocate phase
- */
+ /* Allocate and assign resources */
list_for_each_entry(b, &pci_root_buses, node)
pcibios_allocate_bus_resources(b);
-
- if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
- pcibios_allocate_resources(0);
- pcibios_allocate_resources(1);
- }
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
/* Before we start assigning unassigned resource, we try to reserve
* the low IO area and the VGA memory area if they intersect the
@@ -1732,6 +1737,12 @@
if (mode == PCI_PROBE_NORMAL)
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+ /* Platform gets a chance to do some global fixups before
+ * we proceed to resource allocation
+ */
+ if (ppc_md.pcibios_fixup_phb)
+ ppc_md.pcibios_fixup_phb(hose);
+
/* Configure PCI Express settings */
if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
struct pci_bus *child;
@@ -1747,10 +1758,13 @@
static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
{
int i, class = dev->class >> 8;
+ /* When configured as agent, programing interface = 1 */
+ int prog_if = dev->class & 0xf;
if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
class == PCI_CLASS_BRIDGE_OTHER) &&
(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
+ (prog_if == 0) &&
(dev->bus->parent == NULL)) {
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 4e69deb..dd9e4a0 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -50,6 +50,9 @@
dn->data = pdn;
pdn->node = dn;
pdn->phb = phb;
+#ifdef CONFIG_PPC_POWERNV
+ pdn->pe_number = IODA_INVALID_PE;
+#endif
regs = of_get_property(dn, "reg", NULL);
if (regs) {
/* First register entry is addr (00BBSS00) */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 6457574..ebe5766 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -584,16 +584,32 @@
unsigned long bit;
const char *name;
} msr_bits[] = {
+#if defined(CONFIG_PPC64) && !defined(CONFIG_BOOKE)
+ {MSR_SF, "SF"},
+ {MSR_HV, "HV"},
+#endif
+ {MSR_VEC, "VEC"},
+ {MSR_VSX, "VSX"},
+#ifdef CONFIG_BOOKE
+ {MSR_CE, "CE"},
+#endif
{MSR_EE, "EE"},
{MSR_PR, "PR"},
{MSR_FP, "FP"},
- {MSR_VEC, "VEC"},
- {MSR_VSX, "VSX"},
{MSR_ME, "ME"},
- {MSR_CE, "CE"},
+#ifdef CONFIG_BOOKE
{MSR_DE, "DE"},
+#else
+ {MSR_SE, "SE"},
+ {MSR_BE, "BE"},
+#endif
{MSR_IR, "IR"},
{MSR_DR, "DR"},
+ {MSR_PMM, "PMM"},
+#ifndef CONFIG_BOOKE
+ {MSR_RI, "RI"},
+ {MSR_LE, "LE"},
+#endif
{0, NULL}
};
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index fa1235b..abe405d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -733,8 +733,6 @@
of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
- memblock_init();
-
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
@@ -756,20 +754,14 @@
early_reserve_mem();
phyp_dump_reserve_mem();
- limit = memory_limit;
- if (! limit) {
- phys_addr_t memsize;
-
- /* Ensure that total memory size is page-aligned, because
- * otherwise mark_bootmem() gets upset. */
- memblock_analyze();
- memsize = memblock_phys_mem_size();
- if ((memsize & PAGE_MASK) != memsize)
- limit = memsize & PAGE_MASK;
- }
+ /*
+ * Ensure that total memory size is page-aligned, because otherwise
+ * mark_bootmem() gets upset.
+ */
+ limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
memblock_enforce_memory_limit(limit);
- memblock_analyze();
+ memblock_allow_resize();
memblock_dump_all();
DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index cc58486..eca626e 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -742,7 +742,7 @@
W(0xffffffff), /* virt_base */
W(0xffffffff), /* virt_size */
W(0xffffffff), /* load_base */
- W(64), /* 64MB min RMA */
+ W(256), /* 256MB min RMA */
W(0xffffffff), /* full client load */
0, /* min RMA percentage of total RAM */
48, /* max log_2(hash table size) */
@@ -1224,14 +1224,6 @@
RELOC(alloc_bottom) = PAGE_ALIGN((unsigned long)&RELOC(_end) + 0x4000);
- /* Check if we have an initrd after the kernel, if we do move our bottom
- * point to after it
- */
- if (RELOC(prom_initrd_start)) {
- if (RELOC(prom_initrd_end) > RELOC(alloc_bottom))
- RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
- }
-
/*
* If prom_memory_limit is set we reduce the upper limits *except* for
* alloc_top_high. This must be the real top of RAM so we can put
@@ -1269,6 +1261,15 @@
RELOC(alloc_top) = RELOC(rmo_top);
RELOC(alloc_top_high) = RELOC(ram_top);
+ /*
+ * Check if we have an initrd after the kernel but still inside
+ * the RMO. If we do move our bottom point to after it.
+ */
+ if (RELOC(prom_initrd_start) &&
+ RELOC(prom_initrd_start) < RELOC(rmo_top) &&
+ RELOC(prom_initrd_end) > RELOC(alloc_bottom))
+ RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
+
prom_printf("memory layout at init:\n");
prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
@@ -2079,7 +2080,7 @@
/* Setup a usable color table when the appropriate
* method is available. Should update this to set-colors */
clut = RELOC(default_colors);
- for (i = 0; i < 32; i++, clut += 3)
+ for (i = 0; i < 16; i++, clut += 3)
if (prom_set_color(ih, i, clut[0], clut[1],
clut[2]) != 0)
break;
@@ -2844,7 +2845,7 @@
RELOC(of_platform) = prom_find_machine_type();
prom_printf("Detected machine type: %x\n", RELOC(of_platform));
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
/* Bail if this is a kdump kernel. */
if (PHYSICAL_START > 0)
prom_panic("Error: You can't boot a kdump kernel from OF!\n");
@@ -2969,9 +2970,11 @@
/*
* in case stdin is USB and still active on IBM machines...
* Unfortunately quiesce crashes on some powermacs if we have
- * closed stdin already (in particular the powerbook 101).
+ * closed stdin already (in particular the powerbook 101). It
+ * appears that the OPAL version of OFW doesn't like it either.
*/
- if (RELOC(of_platform) != PLATFORM_POWERMAC)
+ if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+ RELOC(of_platform) != PLATFORM_OPAL)
prom_close_stdin();
/*
@@ -2987,8 +2990,12 @@
* is common to us and kexec
*/
hdr = RELOC(dt_header_start);
- prom_printf("returning from prom_init\n");
- prom_debug("->dt_header_start=0x%x\n", hdr);
+
+ /* Don't print anything after quiesce under OPAL, it crashes OFW */
+ if (RELOC(of_platform) != PLATFORM_OPAL) {
+ prom_printf("returning from prom_init\n");
+ prom_debug("->dt_header_start=0x%x\n", hdr);
+ }
#ifdef CONFIG_PPC32
reloc_got2(-offset);
diff --git a/arch/powerpc/kernel/reloc_32.S b/arch/powerpc/kernel/reloc_32.S
new file mode 100644
index 0000000..ef46ba6
--- /dev/null
+++ b/arch/powerpc/kernel/reloc_32.S
@@ -0,0 +1,208 @@
+/*
+ * Code to process dynamic relocations for PPC32.
+ *
+ * Copyrights (C) IBM Corporation, 2011.
+ * Author: Suzuki Poulose <suzuki@in.ibm.com>
+ *
+ * - Based on ppc64 code - reloc_64.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+
+/* Dynamic section table entry tags */
+DT_RELA = 7 /* Tag for Elf32_Rela section */
+DT_RELASZ = 8 /* Size of the Rela relocs */
+DT_RELAENT = 9 /* Size of one Rela reloc entry */
+
+STN_UNDEF = 0 /* Undefined symbol index */
+STB_LOCAL = 0 /* Local binding for the symbol */
+
+R_PPC_ADDR16_LO = 4 /* Lower half of (S+A) */
+R_PPC_ADDR16_HI = 5 /* Upper half of (S+A) */
+R_PPC_ADDR16_HA = 6 /* High Adjusted (S+A) */
+R_PPC_RELATIVE = 22
+
+/*
+ * r3 = desired final address
+ */
+
+_GLOBAL(relocate)
+
+ mflr r0 /* Save our LR */
+ bl 0f /* Find our current runtime address */
+0: mflr r12 /* Make it accessible */
+ mtlr r0
+
+ lwz r11, (p_dyn - 0b)(r12)
+ add r11, r11, r12 /* runtime address of .dynamic section */
+ lwz r9, (p_rela - 0b)(r12)
+ add r9, r9, r12 /* runtime address of .rela.dyn section */
+ lwz r10, (p_st - 0b)(r12)
+ add r10, r10, r12 /* runtime address of _stext section */
+ lwz r13, (p_sym - 0b)(r12)
+ add r13, r13, r12 /* runtime address of .dynsym section */
+
+ /*
+ * Scan the dynamic section for RELA, RELASZ entries
+ */
+ li r6, 0
+ li r7, 0
+ li r8, 0
+1: lwz r5, 0(r11) /* ELF_Dyn.d_tag */
+ cmpwi r5, 0 /* End of ELF_Dyn[] */
+ beq eodyn
+ cmpwi r5, DT_RELA
+ bne relasz
+ lwz r7, 4(r11) /* r7 = rela.link */
+ b skip
+relasz:
+ cmpwi r5, DT_RELASZ
+ bne relaent
+ lwz r8, 4(r11) /* r8 = Total Rela relocs size */
+ b skip
+relaent:
+ cmpwi r5, DT_RELAENT
+ bne skip
+ lwz r6, 4(r11) /* r6 = Size of one Rela reloc */
+skip:
+ addi r11, r11, 8
+ b 1b
+eodyn: /* End of Dyn Table scan */
+
+ /* Check if we have found all the entries */
+ cmpwi r7, 0
+ beq done
+ cmpwi r8, 0
+ beq done
+ cmpwi r6, 0
+ beq done
+
+
+ /*
+ * Work out the current offset from the link time address of .rela
+ * section.
+ * cur_offset[r7] = rela.run[r9] - rela.link [r7]
+ * _stext.link[r12] = _stext.run[r10] - cur_offset[r7]
+ * final_offset[r3] = _stext.final[r3] - _stext.link[r12]
+ */
+ subf r7, r7, r9 /* cur_offset */
+ subf r12, r7, r10
+ subf r3, r12, r3 /* final_offset */
+
+ subf r8, r6, r8 /* relaz -= relaent */
+ /*
+ * Scan through the .rela table and process each entry
+ * r9 - points to the current .rela table entry
+ * r13 - points to the symbol table
+ */
+
+ /*
+ * Check if we have a relocation based on symbol
+ * r5 will hold the value of the symbol.
+ */
+applyrela:
+ lwz r4, 4(r9) /* r4 = rela.r_info */
+ srwi r5, r4, 8 /* ELF32_R_SYM(r_info) */
+ cmpwi r5, STN_UNDEF /* sym == STN_UNDEF ? */
+ beq get_type /* value = 0 */
+ /* Find the value of the symbol at index(r5) */
+ slwi r5, r5, 4 /* r5 = r5 * sizeof(Elf32_Sym) */
+ add r12, r13, r5 /* r12 = &__dyn_sym[Index] */
+
+ /*
+ * GNU ld has a bug, where dynamic relocs based on
+ * STB_LOCAL symbols, the value should be assumed
+ * to be zero. - Alan Modra
+ */
+ /* XXX: Do we need to check if we are using GNU ld ? */
+ lbz r5, 12(r12) /* r5 = dyn_sym[Index].st_info */
+ extrwi r5, r5, 4, 24 /* r5 = ELF32_ST_BIND(r5) */
+ cmpwi r5, STB_LOCAL /* st_value = 0, ld bug */
+ beq get_type /* We have r5 = 0 */
+ lwz r5, 4(r12) /* r5 = __dyn_sym[Index].st_value */
+
+get_type:
+ /* Load the relocation type to r4 */
+ extrwi r4, r4, 8, 24 /* r4 = ELF32_R_TYPE(r_info) = ((char*)r4)[3] */
+
+ /* R_PPC_RELATIVE */
+ cmpwi r4, R_PPC_RELATIVE
+ bne hi16
+ lwz r4, 0(r9) /* r_offset */
+ lwz r0, 8(r9) /* r_addend */
+ add r0, r0, r3 /* final addend */
+ stwx r0, r4, r7 /* memory[r4+r7]) = (u32)r0 */
+ b nxtrela /* continue */
+
+ /* R_PPC_ADDR16_HI */
+hi16:
+ cmpwi r4, R_PPC_ADDR16_HI
+ bne ha16
+ lwz r4, 0(r9) /* r_offset */
+ lwz r0, 8(r9) /* r_addend */
+ add r0, r0, r3
+ add r0, r0, r5 /* r0 = (S+A+Offset) */
+ extrwi r0, r0, 16, 0 /* r0 = (r0 >> 16) */
+ b store_half
+
+ /* R_PPC_ADDR16_HA */
+ha16:
+ cmpwi r4, R_PPC_ADDR16_HA
+ bne lo16
+ lwz r4, 0(r9) /* r_offset */
+ lwz r0, 8(r9) /* r_addend */
+ add r0, r0, r3
+ add r0, r0, r5 /* r0 = (S+A+Offset) */
+ extrwi r5, r0, 1, 16 /* Extract bit 16 */
+ extrwi r0, r0, 16, 0 /* r0 = (r0 >> 16) */
+ add r0, r0, r5 /* Add it to r0 */
+ b store_half
+
+ /* R_PPC_ADDR16_LO */
+lo16:
+ cmpwi r4, R_PPC_ADDR16_LO
+ bne nxtrela
+ lwz r4, 0(r9) /* r_offset */
+ lwz r0, 8(r9) /* r_addend */
+ add r0, r0, r3
+ add r0, r0, r5 /* r0 = (S+A+Offset) */
+ extrwi r0, r0, 16, 16 /* r0 &= 0xffff */
+ /* Fall through to */
+
+ /* Store half word */
+store_half:
+ sthx r0, r4, r7 /* memory[r4+r7] = (u16)r0 */
+
+nxtrela:
+ /*
+ * We have to flush the modified instructions to the
+ * main storage from the d-cache. And also, invalidate the
+ * cached instructions in i-cache which has been modified.
+ *
+ * We delay the sync / isync operation till the end, since
+ * we won't be executing the modified instructions until
+ * we return from here.
+ */
+ dcbst r4,r7
+ sync /* Ensure the data is flushed before icbi */
+ icbi r4,r7
+ cmpwi r8, 0 /* relasz = 0 ? */
+ ble done
+ add r9, r9, r6 /* move to next entry in the .rela table */
+ subf r8, r6, r8 /* relasz -= relaent */
+ b applyrela
+
+done:
+ sync /* Wait for the flush to finish */
+ isync /* Discard prefetched instructions */
+ blr
+
+p_dyn: .long __dynamic_start - 0b
+p_rela: .long __rela_dyn_start - 0b
+p_sym: .long __dynamic_symtab - 0b
+p_st: .long _stext - 0b
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index e037c74..4174b4b 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -568,6 +568,12 @@
}
/*
+ * Just before starting the firmware flash, cancel the event scan work
+ * to avoid any soft lockup issues.
+ */
+ rtas_cancel_event_scan();
+
+ /*
* NOTE: the "first" block must be under 4GB, so we create
* an entry with no data blocks in the reserved buffer in
* the kernel data segment.
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 481ef06..1045ff4 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -472,6 +472,13 @@
&event_scan_work, event_scan_delay);
}
+/* Cancel the rtas event scan work */
+void rtas_cancel_event_scan(void)
+{
+ cancel_delayed_work_sync(&event_scan_work);
+}
+EXPORT_SYMBOL_GPL(rtas_cancel_event_scan);
+
static int __init rtas_init(void)
{
struct proc_dir_entry *entry;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index fb9bb46..4cb8f1e 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -35,6 +35,8 @@
#include <linux/pci.h>
#include <linux/lockdep.h>
#include <linux/memblock.h>
+#include <linux/hugetlb.h>
+
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
@@ -64,6 +66,7 @@
#include <asm/mmu_context.h>
#include <asm/code-patching.h>
#include <asm/kvm_ppc.h>
+#include <asm/hugetlb.h>
#include "setup.h"
@@ -217,6 +220,13 @@
/* Initialize the hash table or TLB handling */
early_init_mmu();
+ /*
+ * Reserve any gigantic pages requested on the command line.
+ * memblock needs to have been initialized by the time this is
+ * called since this will reserve memory.
+ */
+ reserve_hugetlb_gpages();
+
DBG(" <- early_setup()\n");
}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 6df7090..46695fe 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -27,7 +27,7 @@
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/topology.h>
@@ -187,7 +187,8 @@
return 1;
}
#endif
- err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU,
+ err = request_irq(virq, smp_ipi_action[msg],
+ IRQF_PERCPU | IRQF_NO_THREAD,
smp_ipi_name[msg], 0);
WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
virq, smp_ipi_name[msg], err);
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index ce035c1..883e74c 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -1,4 +1,4 @@
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/percpu.h>
@@ -18,6 +18,7 @@
#include <asm/machdep.h>
#include <asm/smp.h>
#include <asm/pmc.h>
+#include <asm/system.h>
#include "cacheinfo.h"
@@ -37,12 +38,12 @@
/* Time in microseconds we delay before sleeping in the idle loop */
DEFINE_PER_CPU(long, smt_snooze_delay) = { 100 };
-static ssize_t store_smt_snooze_delay(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t store_smt_snooze_delay(struct device *dev,
+ struct device_attribute *attr,
const char *buf,
size_t count)
{
- struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+ struct cpu *cpu = container_of(dev, struct cpu, dev);
ssize_t ret;
long snooze;
@@ -50,21 +51,22 @@
if (ret != 1)
return -EINVAL;
- per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze;
+ per_cpu(smt_snooze_delay, cpu->dev.id) = snooze;
+ update_smt_snooze_delay(snooze);
return count;
}
-static ssize_t show_smt_snooze_delay(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t show_smt_snooze_delay(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
- struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+ struct cpu *cpu = container_of(dev, struct cpu, dev);
- return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
+ return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->dev.id));
}
-static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay,
+static DEVICE_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay,
store_smt_snooze_delay);
static int __init setup_smt_snooze_delay(char *str)
@@ -117,25 +119,25 @@
ppc_enable_pmcs(); \
mtspr(ADDRESS, *(unsigned long *)val); \
} \
-static ssize_t show_##NAME(struct sys_device *dev, \
- struct sysdev_attribute *attr, \
+static ssize_t show_##NAME(struct device *dev, \
+ struct device_attribute *attr, \
char *buf) \
{ \
- struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
+ struct cpu *cpu = container_of(dev, struct cpu, dev); \
unsigned long val; \
- smp_call_function_single(cpu->sysdev.id, read_##NAME, &val, 1); \
+ smp_call_function_single(cpu->dev.id, read_##NAME, &val, 1); \
return sprintf(buf, "%lx\n", val); \
} \
static ssize_t __used \
- store_##NAME(struct sys_device *dev, struct sysdev_attribute *attr, \
+ store_##NAME(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
+ struct cpu *cpu = container_of(dev, struct cpu, dev); \
unsigned long val; \
int ret = sscanf(buf, "%lx", &val); \
if (ret != 1) \
return -EINVAL; \
- smp_call_function_single(cpu->sysdev.id, write_##NAME, &val, 1); \
+ smp_call_function_single(cpu->dev.id, write_##NAME, &val, 1); \
return count; \
}
@@ -177,23 +179,25 @@
SYSFS_PMCSETUP(purr, SPRN_PURR);
SYSFS_PMCSETUP(spurr, SPRN_SPURR);
SYSFS_PMCSETUP(dscr, SPRN_DSCR);
+SYSFS_PMCSETUP(pir, SPRN_PIR);
-static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
-static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
-static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
-static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
+static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
+static DEVICE_ATTR(spurr, 0600, show_spurr, NULL);
+static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
+static DEVICE_ATTR(purr, 0600, show_purr, store_purr);
+static DEVICE_ATTR(pir, 0400, show_pir, NULL);
unsigned long dscr_default = 0;
EXPORT_SYMBOL(dscr_default);
-static ssize_t show_dscr_default(struct sysdev_class *class,
- struct sysdev_class_attribute *attr, char *buf)
+static ssize_t show_dscr_default(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%lx\n", dscr_default);
}
-static ssize_t __used store_dscr_default(struct sysdev_class *class,
- struct sysdev_class_attribute *attr, const char *buf,
+static ssize_t __used store_dscr_default(struct device *dev,
+ struct device_attribute *attr, const char *buf,
size_t count)
{
unsigned long val;
@@ -207,15 +211,14 @@
return count;
}
-static SYSDEV_CLASS_ATTR(dscr_default, 0600,
+static DEVICE_ATTR(dscr_default, 0600,
show_dscr_default, store_dscr_default);
static void sysfs_create_dscr_default(void)
{
int err = 0;
if (cpu_has_feature(CPU_FTR_DSCR))
- err = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
- &attr_dscr_default.attr);
+ err = device_create_file(cpu_subsys.dev_root, &dev_attr_dscr_default);
}
#endif /* CONFIG_PPC64 */
@@ -259,72 +262,72 @@
#endif /* HAS_PPC_PMC_PA6T */
#ifdef HAS_PPC_PMC_IBM
-static struct sysdev_attribute ibm_common_attrs[] = {
- _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
- _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
+static struct device_attribute ibm_common_attrs[] = {
+ __ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
+ __ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
};
#endif /* HAS_PPC_PMC_G4 */
#ifdef HAS_PPC_PMC_G4
-static struct sysdev_attribute g4_common_attrs[] = {
- _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
- _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
- _SYSDEV_ATTR(mmcr2, 0600, show_mmcr2, store_mmcr2),
+static struct device_attribute g4_common_attrs[] = {
+ __ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
+ __ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
+ __ATTR(mmcr2, 0600, show_mmcr2, store_mmcr2),
};
#endif /* HAS_PPC_PMC_G4 */
-static struct sysdev_attribute classic_pmc_attrs[] = {
- _SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1),
- _SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2),
- _SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3),
- _SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4),
- _SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5),
- _SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6),
+static struct device_attribute classic_pmc_attrs[] = {
+ __ATTR(pmc1, 0600, show_pmc1, store_pmc1),
+ __ATTR(pmc2, 0600, show_pmc2, store_pmc2),
+ __ATTR(pmc3, 0600, show_pmc3, store_pmc3),
+ __ATTR(pmc4, 0600, show_pmc4, store_pmc4),
+ __ATTR(pmc5, 0600, show_pmc5, store_pmc5),
+ __ATTR(pmc6, 0600, show_pmc6, store_pmc6),
#ifdef CONFIG_PPC64
- _SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7),
- _SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8),
+ __ATTR(pmc7, 0600, show_pmc7, store_pmc7),
+ __ATTR(pmc8, 0600, show_pmc8, store_pmc8),
#endif
};
#ifdef HAS_PPC_PMC_PA6T
-static struct sysdev_attribute pa6t_attrs[] = {
- _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
- _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
- _SYSDEV_ATTR(pmc0, 0600, show_pa6t_pmc0, store_pa6t_pmc0),
- _SYSDEV_ATTR(pmc1, 0600, show_pa6t_pmc1, store_pa6t_pmc1),
- _SYSDEV_ATTR(pmc2, 0600, show_pa6t_pmc2, store_pa6t_pmc2),
- _SYSDEV_ATTR(pmc3, 0600, show_pa6t_pmc3, store_pa6t_pmc3),
- _SYSDEV_ATTR(pmc4, 0600, show_pa6t_pmc4, store_pa6t_pmc4),
- _SYSDEV_ATTR(pmc5, 0600, show_pa6t_pmc5, store_pa6t_pmc5),
+static struct device_attribute pa6t_attrs[] = {
+ __ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
+ __ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
+ __ATTR(pmc0, 0600, show_pa6t_pmc0, store_pa6t_pmc0),
+ __ATTR(pmc1, 0600, show_pa6t_pmc1, store_pa6t_pmc1),
+ __ATTR(pmc2, 0600, show_pa6t_pmc2, store_pa6t_pmc2),
+ __ATTR(pmc3, 0600, show_pa6t_pmc3, store_pa6t_pmc3),
+ __ATTR(pmc4, 0600, show_pa6t_pmc4, store_pa6t_pmc4),
+ __ATTR(pmc5, 0600, show_pa6t_pmc5, store_pa6t_pmc5),
#ifdef CONFIG_DEBUG_KERNEL
- _SYSDEV_ATTR(hid0, 0600, show_hid0, store_hid0),
- _SYSDEV_ATTR(hid1, 0600, show_hid1, store_hid1),
- _SYSDEV_ATTR(hid4, 0600, show_hid4, store_hid4),
- _SYSDEV_ATTR(hid5, 0600, show_hid5, store_hid5),
- _SYSDEV_ATTR(ima0, 0600, show_ima0, store_ima0),
- _SYSDEV_ATTR(ima1, 0600, show_ima1, store_ima1),
- _SYSDEV_ATTR(ima2, 0600, show_ima2, store_ima2),
- _SYSDEV_ATTR(ima3, 0600, show_ima3, store_ima3),
- _SYSDEV_ATTR(ima4, 0600, show_ima4, store_ima4),
- _SYSDEV_ATTR(ima5, 0600, show_ima5, store_ima5),
- _SYSDEV_ATTR(ima6, 0600, show_ima6, store_ima6),
- _SYSDEV_ATTR(ima7, 0600, show_ima7, store_ima7),
- _SYSDEV_ATTR(ima8, 0600, show_ima8, store_ima8),
- _SYSDEV_ATTR(ima9, 0600, show_ima9, store_ima9),
- _SYSDEV_ATTR(imaat, 0600, show_imaat, store_imaat),
- _SYSDEV_ATTR(btcr, 0600, show_btcr, store_btcr),
- _SYSDEV_ATTR(pccr, 0600, show_pccr, store_pccr),
- _SYSDEV_ATTR(rpccr, 0600, show_rpccr, store_rpccr),
- _SYSDEV_ATTR(der, 0600, show_der, store_der),
- _SYSDEV_ATTR(mer, 0600, show_mer, store_mer),
- _SYSDEV_ATTR(ber, 0600, show_ber, store_ber),
- _SYSDEV_ATTR(ier, 0600, show_ier, store_ier),
- _SYSDEV_ATTR(sier, 0600, show_sier, store_sier),
- _SYSDEV_ATTR(siar, 0600, show_siar, store_siar),
- _SYSDEV_ATTR(tsr0, 0600, show_tsr0, store_tsr0),
- _SYSDEV_ATTR(tsr1, 0600, show_tsr1, store_tsr1),
- _SYSDEV_ATTR(tsr2, 0600, show_tsr2, store_tsr2),
- _SYSDEV_ATTR(tsr3, 0600, show_tsr3, store_tsr3),
+ __ATTR(hid0, 0600, show_hid0, store_hid0),
+ __ATTR(hid1, 0600, show_hid1, store_hid1),
+ __ATTR(hid4, 0600, show_hid4, store_hid4),
+ __ATTR(hid5, 0600, show_hid5, store_hid5),
+ __ATTR(ima0, 0600, show_ima0, store_ima0),
+ __ATTR(ima1, 0600, show_ima1, store_ima1),
+ __ATTR(ima2, 0600, show_ima2, store_ima2),
+ __ATTR(ima3, 0600, show_ima3, store_ima3),
+ __ATTR(ima4, 0600, show_ima4, store_ima4),
+ __ATTR(ima5, 0600, show_ima5, store_ima5),
+ __ATTR(ima6, 0600, show_ima6, store_ima6),
+ __ATTR(ima7, 0600, show_ima7, store_ima7),
+ __ATTR(ima8, 0600, show_ima8, store_ima8),
+ __ATTR(ima9, 0600, show_ima9, store_ima9),
+ __ATTR(imaat, 0600, show_imaat, store_imaat),
+ __ATTR(btcr, 0600, show_btcr, store_btcr),
+ __ATTR(pccr, 0600, show_pccr, store_pccr),
+ __ATTR(rpccr, 0600, show_rpccr, store_rpccr),
+ __ATTR(der, 0600, show_der, store_der),
+ __ATTR(mer, 0600, show_mer, store_mer),
+ __ATTR(ber, 0600, show_ber, store_ber),
+ __ATTR(ier, 0600, show_ier, store_ier),
+ __ATTR(sier, 0600, show_sier, store_sier),
+ __ATTR(siar, 0600, show_siar, store_siar),
+ __ATTR(tsr0, 0600, show_tsr0, store_tsr0),
+ __ATTR(tsr1, 0600, show_tsr1, store_tsr1),
+ __ATTR(tsr2, 0600, show_tsr2, store_tsr2),
+ __ATTR(tsr3, 0600, show_tsr3, store_tsr3),
#endif /* CONFIG_DEBUG_KERNEL */
};
#endif /* HAS_PPC_PMC_PA6T */
@@ -333,14 +336,14 @@
static void __cpuinit register_cpu_online(unsigned int cpu)
{
struct cpu *c = &per_cpu(cpu_devices, cpu);
- struct sys_device *s = &c->sysdev;
- struct sysdev_attribute *attrs, *pmc_attrs;
+ struct device *s = &c->dev;
+ struct device_attribute *attrs, *pmc_attrs;
int i, nattrs;
#ifdef CONFIG_PPC64
if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
cpu_has_feature(CPU_FTR_SMT))
- sysdev_create_file(s, &attr_smt_snooze_delay);
+ device_create_file(s, &dev_attr_smt_snooze_delay);
#endif
/* PMC stuff */
@@ -348,14 +351,14 @@
#ifdef HAS_PPC_PMC_IBM
case PPC_PMC_IBM:
attrs = ibm_common_attrs;
- nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute);
+ nattrs = sizeof(ibm_common_attrs) / sizeof(struct device_attribute);
pmc_attrs = classic_pmc_attrs;
break;
#endif /* HAS_PPC_PMC_IBM */
#ifdef HAS_PPC_PMC_G4
case PPC_PMC_G4:
attrs = g4_common_attrs;
- nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute);
+ nattrs = sizeof(g4_common_attrs) / sizeof(struct device_attribute);
pmc_attrs = classic_pmc_attrs;
break;
#endif /* HAS_PPC_PMC_G4 */
@@ -363,7 +366,7 @@
case PPC_PMC_PA6T:
/* PA Semi starts counting at PMC0 */
attrs = pa6t_attrs;
- nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute);
+ nattrs = sizeof(pa6t_attrs) / sizeof(struct device_attribute);
pmc_attrs = NULL;
break;
#endif /* HAS_PPC_PMC_PA6T */
@@ -374,24 +377,27 @@
}
for (i = 0; i < nattrs; i++)
- sysdev_create_file(s, &attrs[i]);
+ device_create_file(s, &attrs[i]);
if (pmc_attrs)
for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
- sysdev_create_file(s, &pmc_attrs[i]);
+ device_create_file(s, &pmc_attrs[i]);
#ifdef CONFIG_PPC64
if (cpu_has_feature(CPU_FTR_MMCRA))
- sysdev_create_file(s, &attr_mmcra);
+ device_create_file(s, &dev_attr_mmcra);
if (cpu_has_feature(CPU_FTR_PURR))
- sysdev_create_file(s, &attr_purr);
+ device_create_file(s, &dev_attr_purr);
if (cpu_has_feature(CPU_FTR_SPURR))
- sysdev_create_file(s, &attr_spurr);
+ device_create_file(s, &dev_attr_spurr);
if (cpu_has_feature(CPU_FTR_DSCR))
- sysdev_create_file(s, &attr_dscr);
+ device_create_file(s, &dev_attr_dscr);
+
+ if (cpu_has_feature(CPU_FTR_PPCAS_ARCH_V2))
+ device_create_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
cacheinfo_cpu_online(cpu);
@@ -401,8 +407,8 @@
static void unregister_cpu_online(unsigned int cpu)
{
struct cpu *c = &per_cpu(cpu_devices, cpu);
- struct sys_device *s = &c->sysdev;
- struct sysdev_attribute *attrs, *pmc_attrs;
+ struct device *s = &c->dev;
+ struct device_attribute *attrs, *pmc_attrs;
int i, nattrs;
BUG_ON(!c->hotpluggable);
@@ -410,7 +416,7 @@
#ifdef CONFIG_PPC64
if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
cpu_has_feature(CPU_FTR_SMT))
- sysdev_remove_file(s, &attr_smt_snooze_delay);
+ device_remove_file(s, &dev_attr_smt_snooze_delay);
#endif
/* PMC stuff */
@@ -418,14 +424,14 @@
#ifdef HAS_PPC_PMC_IBM
case PPC_PMC_IBM:
attrs = ibm_common_attrs;
- nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute);
+ nattrs = sizeof(ibm_common_attrs) / sizeof(struct device_attribute);
pmc_attrs = classic_pmc_attrs;
break;
#endif /* HAS_PPC_PMC_IBM */
#ifdef HAS_PPC_PMC_G4
case PPC_PMC_G4:
attrs = g4_common_attrs;
- nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute);
+ nattrs = sizeof(g4_common_attrs) / sizeof(struct device_attribute);
pmc_attrs = classic_pmc_attrs;
break;
#endif /* HAS_PPC_PMC_G4 */
@@ -433,7 +439,7 @@
case PPC_PMC_PA6T:
/* PA Semi starts counting at PMC0 */
attrs = pa6t_attrs;
- nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute);
+ nattrs = sizeof(pa6t_attrs) / sizeof(struct device_attribute);
pmc_attrs = NULL;
break;
#endif /* HAS_PPC_PMC_PA6T */
@@ -444,24 +450,27 @@
}
for (i = 0; i < nattrs; i++)
- sysdev_remove_file(s, &attrs[i]);
+ device_remove_file(s, &attrs[i]);
if (pmc_attrs)
for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
- sysdev_remove_file(s, &pmc_attrs[i]);
+ device_remove_file(s, &pmc_attrs[i]);
#ifdef CONFIG_PPC64
if (cpu_has_feature(CPU_FTR_MMCRA))
- sysdev_remove_file(s, &attr_mmcra);
+ device_remove_file(s, &dev_attr_mmcra);
if (cpu_has_feature(CPU_FTR_PURR))
- sysdev_remove_file(s, &attr_purr);
+ device_remove_file(s, &dev_attr_purr);
if (cpu_has_feature(CPU_FTR_SPURR))
- sysdev_remove_file(s, &attr_spurr);
+ device_remove_file(s, &dev_attr_spurr);
if (cpu_has_feature(CPU_FTR_DSCR))
- sysdev_remove_file(s, &attr_dscr);
+ device_remove_file(s, &dev_attr_dscr);
+
+ if (cpu_has_feature(CPU_FTR_PPCAS_ARCH_V2))
+ device_remove_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
cacheinfo_cpu_offline(cpu);
@@ -513,70 +522,70 @@
static DEFINE_MUTEX(cpu_mutex);
-int cpu_add_sysdev_attr(struct sysdev_attribute *attr)
+int cpu_add_dev_attr(struct device_attribute *attr)
{
int cpu;
mutex_lock(&cpu_mutex);
for_each_possible_cpu(cpu) {
- sysdev_create_file(get_cpu_sysdev(cpu), attr);
+ device_create_file(get_cpu_device(cpu), attr);
}
mutex_unlock(&cpu_mutex);
return 0;
}
-EXPORT_SYMBOL_GPL(cpu_add_sysdev_attr);
+EXPORT_SYMBOL_GPL(cpu_add_dev_attr);
-int cpu_add_sysdev_attr_group(struct attribute_group *attrs)
+int cpu_add_dev_attr_group(struct attribute_group *attrs)
{
int cpu;
- struct sys_device *sysdev;
+ struct device *dev;
int ret;
mutex_lock(&cpu_mutex);
for_each_possible_cpu(cpu) {
- sysdev = get_cpu_sysdev(cpu);
- ret = sysfs_create_group(&sysdev->kobj, attrs);
+ dev = get_cpu_device(cpu);
+ ret = sysfs_create_group(&dev->kobj, attrs);
WARN_ON(ret != 0);
}
mutex_unlock(&cpu_mutex);
return 0;
}
-EXPORT_SYMBOL_GPL(cpu_add_sysdev_attr_group);
+EXPORT_SYMBOL_GPL(cpu_add_dev_attr_group);
-void cpu_remove_sysdev_attr(struct sysdev_attribute *attr)
+void cpu_remove_dev_attr(struct device_attribute *attr)
{
int cpu;
mutex_lock(&cpu_mutex);
for_each_possible_cpu(cpu) {
- sysdev_remove_file(get_cpu_sysdev(cpu), attr);
+ device_remove_file(get_cpu_device(cpu), attr);
}
mutex_unlock(&cpu_mutex);
}
-EXPORT_SYMBOL_GPL(cpu_remove_sysdev_attr);
+EXPORT_SYMBOL_GPL(cpu_remove_dev_attr);
-void cpu_remove_sysdev_attr_group(struct attribute_group *attrs)
+void cpu_remove_dev_attr_group(struct attribute_group *attrs)
{
int cpu;
- struct sys_device *sysdev;
+ struct device *dev;
mutex_lock(&cpu_mutex);
for_each_possible_cpu(cpu) {
- sysdev = get_cpu_sysdev(cpu);
- sysfs_remove_group(&sysdev->kobj, attrs);
+ dev = get_cpu_device(cpu);
+ sysfs_remove_group(&dev->kobj, attrs);
}
mutex_unlock(&cpu_mutex);
}
-EXPORT_SYMBOL_GPL(cpu_remove_sysdev_attr_group);
+EXPORT_SYMBOL_GPL(cpu_remove_dev_attr_group);
/* NUMA stuff */
@@ -590,18 +599,18 @@
register_one_node(i);
}
-int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+int sysfs_add_device_to_node(struct device *dev, int nid)
{
struct node *node = &node_devices[nid];
- return sysfs_create_link(&node->sysdev.kobj, &dev->kobj,
+ return sysfs_create_link(&node->dev.kobj, &dev->kobj,
kobject_name(&dev->kobj));
}
EXPORT_SYMBOL_GPL(sysfs_add_device_to_node);
-void sysfs_remove_device_from_node(struct sys_device *dev, int nid)
+void sysfs_remove_device_from_node(struct device *dev, int nid)
{
struct node *node = &node_devices[nid];
- sysfs_remove_link(&node->sysdev.kobj, kobject_name(&dev->kobj));
+ sysfs_remove_link(&node->dev.kobj, kobject_name(&dev->kobj));
}
EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node);
@@ -614,14 +623,14 @@
#endif
/* Only valid if CPU is present. */
-static ssize_t show_physical_id(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_physical_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+ struct cpu *cpu = container_of(dev, struct cpu, dev);
- return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->sysdev.id));
+ return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->dev.id));
}
-static SYSDEV_ATTR(physical_id, 0444, show_physical_id, NULL);
+static DEVICE_ATTR(physical_id, 0444, show_physical_id, NULL);
static int __init topology_init(void)
{
@@ -646,7 +655,7 @@
if (cpu_online(cpu) || c->hotpluggable) {
register_cpu(c, cpu);
- sysdev_create_file(&c->sysdev, &attr_physical_id);
+ device_create_file(&c->dev, &dev_attr_physical_id);
}
if (cpu_online(cpu))
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 522bb1d..567dd7c 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -86,8 +86,6 @@
.rating = 400,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.mask = CLOCKSOURCE_MASK(64),
- .shift = 22,
- .mult = 0, /* To be filled in */
.read = rtc_read,
};
@@ -97,8 +95,6 @@
.rating = 400,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.mask = CLOCKSOURCE_MASK(64),
- .shift = 22,
- .mult = 0, /* To be filled in */
.read = timebase_read,
};
@@ -110,22 +106,16 @@
struct clock_event_device *dev);
static struct clock_event_device decrementer_clockevent = {
- .name = "decrementer",
- .rating = 200,
- .shift = 0, /* To be filled in */
- .mult = 0, /* To be filled in */
- .irq = 0,
- .set_next_event = decrementer_set_next_event,
- .set_mode = decrementer_set_mode,
- .features = CLOCK_EVT_FEAT_ONESHOT,
+ .name = "decrementer",
+ .rating = 200,
+ .irq = 0,
+ .set_next_event = decrementer_set_next_event,
+ .set_mode = decrementer_set_mode,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
};
-struct decrementer_clock {
- struct clock_event_device event;
- u64 next_tb;
-};
-
-static DEFINE_PER_CPU(struct decrementer_clock, decrementers);
+DEFINE_PER_CPU(u64, decrementers_next_tb);
+static DEFINE_PER_CPU(struct clock_event_device, decrementers);
#ifdef CONFIG_PPC_ISERIES
static unsigned long __initdata iSeries_recal_titan;
@@ -168,13 +158,13 @@
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
/*
* Factors for converting from cputime_t (timebase ticks) to
- * jiffies, milliseconds, seconds, and clock_t (1/USER_HZ seconds).
+ * jiffies, microseconds, seconds, and clock_t (1/USER_HZ seconds).
* These are all stored as 0.64 fixed-point binary fractions.
*/
u64 __cputime_jiffies_factor;
EXPORT_SYMBOL(__cputime_jiffies_factor);
-u64 __cputime_msec_factor;
-EXPORT_SYMBOL(__cputime_msec_factor);
+u64 __cputime_usec_factor;
+EXPORT_SYMBOL(__cputime_usec_factor);
u64 __cputime_sec_factor;
EXPORT_SYMBOL(__cputime_sec_factor);
u64 __cputime_clockt_factor;
@@ -192,8 +182,8 @@
div128_by_32(HZ, 0, tb_ticks_per_sec, &res);
__cputime_jiffies_factor = res.result_low;
- div128_by_32(1000, 0, tb_ticks_per_sec, &res);
- __cputime_msec_factor = res.result_low;
+ div128_by_32(1000000, 0, tb_ticks_per_sec, &res);
+ __cputime_usec_factor = res.result_low;
div128_by_32(1, 0, tb_ticks_per_sec, &res);
__cputime_sec_factor = res.result_low;
div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res);
@@ -441,7 +431,7 @@
/*
* This function recalibrates the timebase based on the 49-bit time-of-day
* value in the Titan chip. The Titan is much more accurate than the value
- * returned by the service processor for the timebase frequency.
+ * returned by the service processor for the timebase frequency.
*/
static int __init iSeries_tb_recal(void)
@@ -576,9 +566,8 @@
void timer_interrupt(struct pt_regs * regs)
{
struct pt_regs *old_regs;
- struct decrementer_clock *decrementer = &__get_cpu_var(decrementers);
- struct clock_event_device *evt = &decrementer->event;
- u64 now;
+ u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+ struct clock_event_device *evt = &__get_cpu_var(decrementers);
/* Ensure a positive value is written to the decrementer, or else
* some CPUs will continue to take decrementer exceptions.
@@ -613,16 +602,9 @@
get_lppaca()->int_dword.fields.decr_int = 0;
#endif
- now = get_tb_or_rtc();
- if (now >= decrementer->next_tb) {
- decrementer->next_tb = ~(u64)0;
- if (evt->event_handler)
- evt->event_handler(evt);
- } else {
- now = decrementer->next_tb - now;
- if (now <= DECREMENTER_MAX)
- set_dec((int)now);
- }
+ *next_tb = ~(u64)0;
+ if (evt->event_handler)
+ evt->event_handler(evt);
#ifdef CONFIG_PPC_ISERIES
if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending())
@@ -650,9 +632,9 @@
* with suspending.
*/
- set_dec(0x7fffffff);
+ set_dec(DECREMENTER_MAX);
local_irq_disable();
- set_dec(0x7fffffff);
+ set_dec(DECREMENTER_MAX);
}
static void generic_suspend_enable_irqs(void)
@@ -824,9 +806,8 @@
++vdso_data->tb_update_count;
smp_mb();
- /* XXX this assumes clock->shift == 22 */
- /* 4611686018 ~= 2^(20+64-22) / 1e9 */
- new_tb_to_xs = (u64) mult * 4611686018ULL;
+ /* 19342813113834067 ~= 2^(20+64) / 1e9 */
+ new_tb_to_xs = (u64) mult * (19342813113834067ULL >> clock->shift);
new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC;
do_div(new_stamp_xsec, 1000000000);
new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC;
@@ -877,9 +858,7 @@
else
clock = &clocksource_timebase;
- clock->mult = clocksource_hz2mult(tb_ticks_per_sec, clock->shift);
-
- if (clocksource_register(clock)) {
+ if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
printk(KERN_ERR "clocksource: %s is already registered\n",
clock->name);
return;
@@ -892,7 +871,7 @@
static int decrementer_set_next_event(unsigned long evt,
struct clock_event_device *dev)
{
- __get_cpu_var(decrementers).next_tb = get_tb_or_rtc() + evt;
+ __get_cpu_var(decrementers_next_tb) = get_tb_or_rtc() + evt;
set_dec(evt);
return 0;
}
@@ -904,34 +883,9 @@
decrementer_set_next_event(DECREMENTER_MAX, dev);
}
-static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec,
- int shift)
-{
- uint64_t tmp = ((uint64_t)ticks) << shift;
-
- do_div(tmp, nsec);
- return tmp;
-}
-
-static void __init setup_clockevent_multiplier(unsigned long hz)
-{
- u64 mult, shift = 32;
-
- while (1) {
- mult = div_sc64(hz, NSEC_PER_SEC, shift);
- if (mult && (mult >> 32UL) == 0UL)
- break;
-
- shift--;
- }
-
- decrementer_clockevent.shift = shift;
- decrementer_clockevent.mult = mult;
-}
-
static void register_decrementer_clockevent(int cpu)
{
- struct clock_event_device *dec = &per_cpu(decrementers, cpu).event;
+ struct clock_event_device *dec = &per_cpu(decrementers, cpu);
*dec = decrementer_clockevent;
dec->cpumask = cpumask_of(cpu);
@@ -946,7 +900,8 @@
{
int cpu = smp_processor_id();
- setup_clockevent_multiplier(ppc_tb_freq);
+ clockevents_calc_mult_shift(&decrementer_clockevent, ppc_tb_freq, 4);
+
decrementer_clockevent.max_delta_ns =
clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
decrementer_clockevent.min_delta_ns =
@@ -1014,10 +969,10 @@
boot_tb = get_tb_or_rtc();
/* If platform provided a timezone (pmac), we correct the time */
- if (timezone_offset) {
+ if (timezone_offset) {
sys_tz.tz_minuteswest = -timezone_offset / 60;
sys_tz.tz_dsttime = 0;
- }
+ }
vdso_data->tb_update_count = 0;
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 5459d14..c091527 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -98,18 +98,14 @@
static inline void pmac_backlight_unblank(void) { }
#endif
-int die(const char *str, struct pt_regs *regs, long err)
+static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+static int die_counter;
+
+static unsigned __kprobes long oops_begin(struct pt_regs *regs)
{
- static struct {
- raw_spinlock_t lock;
- u32 lock_owner;
- int lock_owner_depth;
- } die = {
- .lock = __RAW_SPIN_LOCK_UNLOCKED(die.lock),
- .lock_owner = -1,
- .lock_owner_depth = 0
- };
- static int die_counter;
+ int cpu;
unsigned long flags;
if (debugger(regs))
@@ -117,66 +113,109 @@
oops_enter();
- if (die.lock_owner != raw_smp_processor_id()) {
- console_verbose();
- raw_spin_lock_irqsave(&die.lock, flags);
- die.lock_owner = smp_processor_id();
- die.lock_owner_depth = 0;
- bust_spinlocks(1);
- if (machine_is(powermac))
- pmac_backlight_unblank();
- } else {
- local_save_flags(flags);
+ /* racy, but better than risking deadlock. */
+ raw_local_irq_save(flags);
+ cpu = smp_processor_id();
+ if (!arch_spin_trylock(&die_lock)) {
+ if (cpu == die_owner)
+ /* nested oops. should stop eventually */;
+ else
+ arch_spin_lock(&die_lock);
}
+ die_nest_count++;
+ die_owner = cpu;
+ console_verbose();
+ bust_spinlocks(1);
+ if (machine_is(powermac))
+ pmac_backlight_unblank();
+ return flags;
+}
- if (++die.lock_owner_depth < 3) {
- printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
-#ifdef CONFIG_PREEMPT
- printk("PREEMPT ");
-#endif
-#ifdef CONFIG_SMP
- printk("SMP NR_CPUS=%d ", NR_CPUS);
-#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
- printk("DEBUG_PAGEALLOC ");
-#endif
-#ifdef CONFIG_NUMA
- printk("NUMA ");
-#endif
- printk("%s\n", ppc_md.name ? ppc_md.name : "");
-
- if (notify_die(DIE_OOPS, str, regs, err, 255,
- SIGSEGV) == NOTIFY_STOP)
- return 1;
-
- print_modules();
- show_regs(regs);
- } else {
- printk("Recursive die() failure, output suppressed\n");
- }
-
+static void __kprobes oops_end(unsigned long flags, struct pt_regs *regs,
+ int signr)
+{
bust_spinlocks(0);
- die.lock_owner = -1;
+ die_owner = -1;
add_taint(TAINT_DIE);
- raw_spin_unlock_irqrestore(&die.lock, flags);
+ die_nest_count--;
+ oops_exit();
+ printk("\n");
+ if (!die_nest_count)
+ /* Nest count reaches zero, release the lock. */
+ arch_spin_unlock(&die_lock);
+ raw_local_irq_restore(flags);
- if (kexec_should_crash(current) ||
- kexec_sr_activated(smp_processor_id()))
+ /*
+ * A system reset (0x100) is a request to dump, so we always send
+ * it through the crashdump code.
+ */
+ if (kexec_should_crash(current) || (TRAP(regs) == 0x100)) {
crash_kexec(regs);
- crash_kexec_secondary(regs);
+
+ /*
+ * We aren't the primary crash CPU. We need to send it
+ * to a holding pattern to avoid it ending up in the panic
+ * code.
+ */
+ crash_kexec_secondary(regs);
+ }
+
+ if (!signr)
+ return;
+
+ /*
+ * While our oops output is serialised by a spinlock, output
+ * from panic() called below can race and corrupt it. If we
+ * know we are going to panic, delay for 1 second so we have a
+ * chance to get clean backtraces from all CPUs that are oopsing.
+ */
+ if (in_interrupt() || panic_on_oops || !current->pid ||
+ is_global_init(current)) {
+ mdelay(MSEC_PER_SEC);
+ }
if (in_interrupt())
panic("Fatal exception in interrupt");
-
if (panic_on_oops)
panic("Fatal exception");
+ do_exit(signr);
+}
- oops_exit();
- do_exit(err);
+static int __kprobes __die(const char *str, struct pt_regs *regs, long err)
+{
+ printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
+#ifdef CONFIG_PREEMPT
+ printk("PREEMPT ");
+#endif
+#ifdef CONFIG_SMP
+ printk("SMP NR_CPUS=%d ", NR_CPUS);
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+ printk("DEBUG_PAGEALLOC ");
+#endif
+#ifdef CONFIG_NUMA
+ printk("NUMA ");
+#endif
+ printk("%s\n", ppc_md.name ? ppc_md.name : "");
+
+ if (notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV) == NOTIFY_STOP)
+ return 1;
+
+ print_modules();
+ show_regs(regs);
return 0;
}
+void die(const char *str, struct pt_regs *regs, long err)
+{
+ unsigned long flags = oops_begin(regs);
+
+ if (__die(str, regs, err))
+ err = 0;
+ oops_end(flags, regs, err);
+}
+
void user_single_step_siginfo(struct task_struct *tsk,
struct pt_regs *regs, siginfo_t *info)
{
@@ -195,10 +234,11 @@
"at %016lx nip %016lx lr %016lx code %x\n";
if (!user_mode(regs)) {
- if (die("Exception in kernel mode", regs, signr))
- return;
- } else if (show_unhandled_signals &&
- unhandled_signal(current, signr)) {
+ die("Exception in kernel mode", regs, signr);
+ return;
+ }
+
+ if (show_unhandled_signals && unhandled_signal(current, signr)) {
printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
current->comm, current->pid, signr,
addr, regs->nip, regs->link, code);
@@ -220,25 +260,8 @@
return;
}
-#ifdef CONFIG_KEXEC
- cpumask_set_cpu(smp_processor_id(), &cpus_in_sr);
-#endif
-
die("System Reset", regs, SIGABRT);
- /*
- * Some CPUs when released from the debugger will execute this path.
- * These CPUs entered the debugger via a soft-reset. If the CPU was
- * hung before entering the debugger it will return to the hung
- * state when exiting this function. This causes a problem in
- * kdump since the hung CPU(s) will not respond to the IPI sent
- * from kdump. To prevent the problem we call crash_kexec_secondary()
- * here. If a kdump had not been initiated or we exit the debugger
- * with the "exit and recover" command (x) crash_kexec_secondary()
- * will return after 5ms and the CPU returns to its previous state.
- */
- crash_kexec_secondary(regs);
-
/* Must die if the interrupt is not recoverable */
if (!(regs->msr & MSR_RI))
panic("Unrecoverable System Reset");
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index f65af61..8b08629 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1406,7 +1406,6 @@
.match = vio_bus_match,
.probe = vio_bus_probe,
.remove = vio_bus_remove,
- .pm = GENERIC_SUBSYS_PM_OPS,
};
/**
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 920276c..710a540 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -170,7 +170,13 @@
}
#ifdef CONFIG_RELOCATABLE
. = ALIGN(8);
- .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) }
+ .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET)
+ {
+#ifdef CONFIG_RELOCATABLE_PPC32
+ __dynamic_symtab = .;
+#endif
+ *(.dynsym)
+ }
.dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
.dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET)
{
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 0cb137a..336983d 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -538,7 +538,7 @@
tpaca->kvm_hstate.napping = 0;
vcpu->cpu = vc->pcpu;
smp_wmb();
-#ifdef CONFIG_PPC_ICP_NATIVE
+#if defined(CONFIG_PPC_ICP_NATIVE) && defined(CONFIG_SMP)
if (vcpu->arch.ptid) {
tpaca->cpu_start = 0x80;
wmb();
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 44d8829..5c8b261 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -112,6 +112,9 @@
stbcix r0, r5, r6 /* clear it */
stwcix r8, r5, r7 /* EOI it */
+ /* NV GPR values from power7_idle() will no longer be valid */
+ stb r0, PACA_NAPSTATELOST(r13)
+
.global kvmppc_hv_entry
kvmppc_hv_entry:
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 3c791e1..e2cfb9e 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -658,10 +658,12 @@
ulong cmd = kvmppc_get_gpr(vcpu, 3);
int i;
+#ifdef CONFIG_KVM_BOOK3S_64_PR
if (kvmppc_h_pr(vcpu, cmd) == EMULATE_DONE) {
r = RESUME_GUEST;
break;
}
+#endif
run->papr_hcall.nr = cmd;
for (i = 0; i < 9; ++i) {
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 26d2090..8c0d45a 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -15,6 +15,7 @@
#include <linux/kvm_host.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/reg.h>
#include <asm/cputable.h>
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 166a6a0..7735a2c 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -16,13 +16,15 @@
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
memcpy_64.o usercopy_64.o mem_64.o string.o \
- checksum_wrappers_64.o hweight_64.o
+ checksum_wrappers_64.o hweight_64.o \
+ copyuser_power7.o
obj-$(CONFIG_XMON) += sstep.o ldstfp.o
obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
+obj-$(CONFIG_ALTIVEC) += copyuser_power7_vmx.o
endif
obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 578b625..773d38f 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -11,6 +11,12 @@
.align 7
_GLOBAL(__copy_tofrom_user)
+BEGIN_FTR_SECTION
+ nop
+FTR_SECTION_ELSE
+ b __copy_tofrom_user_power7
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
+_GLOBAL(__copy_tofrom_user_base)
/* first check for a whole page copy on a page boundary */
cmpldi cr1,r5,16
cmpdi cr6,r5,4096
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
new file mode 100644
index 0000000..497db7b
--- /dev/null
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -0,0 +1,683 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2011
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <asm/ppc_asm.h>
+
+#define STACKFRAMESIZE 256
+#define STK_REG(i) (112 + ((i)-14)*8)
+
+ .macro err1
+100:
+ .section __ex_table,"a"
+ .align 3
+ .llong 100b,.Ldo_err1
+ .previous
+ .endm
+
+ .macro err2
+200:
+ .section __ex_table,"a"
+ .align 3
+ .llong 200b,.Ldo_err2
+ .previous
+ .endm
+
+#ifdef CONFIG_ALTIVEC
+ .macro err3
+300:
+ .section __ex_table,"a"
+ .align 3
+ .llong 300b,.Ldo_err3
+ .previous
+ .endm
+
+ .macro err4
+400:
+ .section __ex_table,"a"
+ .align 3
+ .llong 400b,.Ldo_err4
+ .previous
+ .endm
+
+
+.Ldo_err4:
+ ld r16,STK_REG(r16)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r14,STK_REG(r14)(r1)
+.Ldo_err3:
+ bl .exit_vmx_copy
+ ld r0,STACKFRAMESIZE+16(r1)
+ mtlr r0
+ b .Lexit
+#endif /* CONFIG_ALTIVEC */
+
+.Ldo_err2:
+ ld r22,STK_REG(r22)(r1)
+ ld r21,STK_REG(r21)(r1)
+ ld r20,STK_REG(r20)(r1)
+ ld r19,STK_REG(r19)(r1)
+ ld r18,STK_REG(r18)(r1)
+ ld r17,STK_REG(r17)(r1)
+ ld r16,STK_REG(r16)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r14,STK_REG(r14)(r1)
+.Lexit:
+ addi r1,r1,STACKFRAMESIZE
+.Ldo_err1:
+ ld r3,48(r1)
+ ld r4,56(r1)
+ ld r5,64(r1)
+ b __copy_tofrom_user_base
+
+
+_GLOBAL(__copy_tofrom_user_power7)
+#ifdef CONFIG_ALTIVEC
+ cmpldi r5,16
+ cmpldi cr1,r5,4096
+
+ std r3,48(r1)
+ std r4,56(r1)
+ std r5,64(r1)
+
+ blt .Lshort_copy
+ bgt cr1,.Lvmx_copy
+#else
+ cmpldi r5,16
+
+ std r3,48(r1)
+ std r4,56(r1)
+ std r5,64(r1)
+
+ blt .Lshort_copy
+#endif
+
+.Lnonvmx_copy:
+ /* Get the source 8B aligned */
+ neg r6,r4
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-3)
+
+ bf cr7*4+3,1f
+err1; lbz r0,0(r4)
+ addi r4,r4,1
+err1; stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+err1; lhz r0,0(r4)
+ addi r4,r4,2
+err1; sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+err1; lwz r0,0(r4)
+ addi r4,r4,4
+err1; stw r0,0(r3)
+ addi r3,r3,4
+
+3: sub r5,r5,r6
+ cmpldi r5,128
+ blt 5f
+
+ mflr r0
+ stdu r1,-STACKFRAMESIZE(r1)
+ std r14,STK_REG(r14)(r1)
+ std r15,STK_REG(r15)(r1)
+ std r16,STK_REG(r16)(r1)
+ std r17,STK_REG(r17)(r1)
+ std r18,STK_REG(r18)(r1)
+ std r19,STK_REG(r19)(r1)
+ std r20,STK_REG(r20)(r1)
+ std r21,STK_REG(r21)(r1)
+ std r22,STK_REG(r22)(r1)
+ std r0,STACKFRAMESIZE+16(r1)
+
+ srdi r6,r5,7
+ mtctr r6
+
+ /* Now do cacheline (128B) sized loads and stores. */
+ .align 5
+4:
+err2; ld r0,0(r4)
+err2; ld r6,8(r4)
+err2; ld r7,16(r4)
+err2; ld r8,24(r4)
+err2; ld r9,32(r4)
+err2; ld r10,40(r4)
+err2; ld r11,48(r4)
+err2; ld r12,56(r4)
+err2; ld r14,64(r4)
+err2; ld r15,72(r4)
+err2; ld r16,80(r4)
+err2; ld r17,88(r4)
+err2; ld r18,96(r4)
+err2; ld r19,104(r4)
+err2; ld r20,112(r4)
+err2; ld r21,120(r4)
+ addi r4,r4,128
+err2; std r0,0(r3)
+err2; std r6,8(r3)
+err2; std r7,16(r3)
+err2; std r8,24(r3)
+err2; std r9,32(r3)
+err2; std r10,40(r3)
+err2; std r11,48(r3)
+err2; std r12,56(r3)
+err2; std r14,64(r3)
+err2; std r15,72(r3)
+err2; std r16,80(r3)
+err2; std r17,88(r3)
+err2; std r18,96(r3)
+err2; std r19,104(r3)
+err2; std r20,112(r3)
+err2; std r21,120(r3)
+ addi r3,r3,128
+ bdnz 4b
+
+ clrldi r5,r5,(64-7)
+
+ ld r14,STK_REG(r14)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r16,STK_REG(r16)(r1)
+ ld r17,STK_REG(r17)(r1)
+ ld r18,STK_REG(r18)(r1)
+ ld r19,STK_REG(r19)(r1)
+ ld r20,STK_REG(r20)(r1)
+ ld r21,STK_REG(r21)(r1)
+ ld r22,STK_REG(r22)(r1)
+ addi r1,r1,STACKFRAMESIZE
+
+ /* Up to 127B to go */
+5: srdi r6,r5,4
+ mtocrf 0x01,r6
+
+6: bf cr7*4+1,7f
+err1; ld r0,0(r4)
+err1; ld r6,8(r4)
+err1; ld r7,16(r4)
+err1; ld r8,24(r4)
+err1; ld r9,32(r4)
+err1; ld r10,40(r4)
+err1; ld r11,48(r4)
+err1; ld r12,56(r4)
+ addi r4,r4,64
+err1; std r0,0(r3)
+err1; std r6,8(r3)
+err1; std r7,16(r3)
+err1; std r8,24(r3)
+err1; std r9,32(r3)
+err1; std r10,40(r3)
+err1; std r11,48(r3)
+err1; std r12,56(r3)
+ addi r3,r3,64
+
+ /* Up to 63B to go */
+7: bf cr7*4+2,8f
+err1; ld r0,0(r4)
+err1; ld r6,8(r4)
+err1; ld r7,16(r4)
+err1; ld r8,24(r4)
+ addi r4,r4,32
+err1; std r0,0(r3)
+err1; std r6,8(r3)
+err1; std r7,16(r3)
+err1; std r8,24(r3)
+ addi r3,r3,32
+
+ /* Up to 31B to go */
+8: bf cr7*4+3,9f
+err1; ld r0,0(r4)
+err1; ld r6,8(r4)
+ addi r4,r4,16
+err1; std r0,0(r3)
+err1; std r6,8(r3)
+ addi r3,r3,16
+
+9: clrldi r5,r5,(64-4)
+
+ /* Up to 15B to go */
+.Lshort_copy:
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+err1; lwz r0,0(r4) /* Less chance of a reject with word ops */
+err1; lwz r6,4(r4)
+ addi r4,r4,8
+err1; stw r0,0(r3)
+err1; stw r6,4(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+err1; lwz r0,0(r4)
+ addi r4,r4,4
+err1; stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+err1; lhz r0,0(r4)
+ addi r4,r4,2
+err1; sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+err1; lbz r0,0(r4)
+err1; stb r0,0(r3)
+
+15: li r3,0
+ blr
+
+.Lunwind_stack_nonvmx_copy:
+ addi r1,r1,STACKFRAMESIZE
+ b .Lnonvmx_copy
+
+#ifdef CONFIG_ALTIVEC
+.Lvmx_copy:
+ mflr r0
+ std r0,16(r1)
+ stdu r1,-STACKFRAMESIZE(r1)
+ bl .enter_vmx_copy
+ cmpwi r3,0
+ ld r0,STACKFRAMESIZE+16(r1)
+ ld r3,STACKFRAMESIZE+48(r1)
+ ld r4,STACKFRAMESIZE+56(r1)
+ ld r5,STACKFRAMESIZE+64(r1)
+ mtlr r0
+
+ beq .Lunwind_stack_nonvmx_copy
+
+ /*
+ * If source and destination are not relatively aligned we use a
+ * slower permute loop.
+ */
+ xor r6,r4,r3
+ rldicl. r6,r6,0,(64-4)
+ bne .Lvmx_unaligned_copy
+
+ /* Get the destination 16B aligned */
+ neg r6,r3
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-4)
+
+ bf cr7*4+3,1f
+err3; lbz r0,0(r4)
+ addi r4,r4,1
+err3; stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+err3; lhz r0,0(r4)
+ addi r4,r4,2
+err3; sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+err3; lwz r0,0(r4)
+ addi r4,r4,4
+err3; stw r0,0(r3)
+ addi r3,r3,4
+
+3: bf cr7*4+0,4f
+err3; ld r0,0(r4)
+ addi r4,r4,8
+err3; std r0,0(r3)
+ addi r3,r3,8
+
+4: sub r5,r5,r6
+
+ /* Get the desination 128B aligned */
+ neg r6,r3
+ srdi r7,r6,4
+ mtocrf 0x01,r7
+ clrldi r6,r6,(64-7)
+
+ li r9,16
+ li r10,32
+ li r11,48
+
+ bf cr7*4+3,5f
+err3; lvx vr1,r0,r4
+ addi r4,r4,16
+err3; stvx vr1,r0,r3
+ addi r3,r3,16
+
+5: bf cr7*4+2,6f
+err3; lvx vr1,r0,r4
+err3; lvx vr0,r4,r9
+ addi r4,r4,32
+err3; stvx vr1,r0,r3
+err3; stvx vr0,r3,r9
+ addi r3,r3,32
+
+6: bf cr7*4+1,7f
+err3; lvx vr3,r0,r4
+err3; lvx vr2,r4,r9
+err3; lvx vr1,r4,r10
+err3; lvx vr0,r4,r11
+ addi r4,r4,64
+err3; stvx vr3,r0,r3
+err3; stvx vr2,r3,r9
+err3; stvx vr1,r3,r10
+err3; stvx vr0,r3,r11
+ addi r3,r3,64
+
+7: sub r5,r5,r6
+ srdi r6,r5,7
+
+ std r14,STK_REG(r14)(r1)
+ std r15,STK_REG(r15)(r1)
+ std r16,STK_REG(r16)(r1)
+
+ li r12,64
+ li r14,80
+ li r15,96
+ li r16,112
+
+ mtctr r6
+
+ /*
+ * Now do cacheline sized loads and stores. By this stage the
+ * cacheline stores are also cacheline aligned.
+ */
+ .align 5
+8:
+err4; lvx vr7,r0,r4
+err4; lvx vr6,r4,r9
+err4; lvx vr5,r4,r10
+err4; lvx vr4,r4,r11
+err4; lvx vr3,r4,r12
+err4; lvx vr2,r4,r14
+err4; lvx vr1,r4,r15
+err4; lvx vr0,r4,r16
+ addi r4,r4,128
+err4; stvx vr7,r0,r3
+err4; stvx vr6,r3,r9
+err4; stvx vr5,r3,r10
+err4; stvx vr4,r3,r11
+err4; stvx vr3,r3,r12
+err4; stvx vr2,r3,r14
+err4; stvx vr1,r3,r15
+err4; stvx vr0,r3,r16
+ addi r3,r3,128
+ bdnz 8b
+
+ ld r14,STK_REG(r14)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r16,STK_REG(r16)(r1)
+
+ /* Up to 127B to go */
+ clrldi r5,r5,(64-7)
+ srdi r6,r5,4
+ mtocrf 0x01,r6
+
+ bf cr7*4+1,9f
+err3; lvx vr3,r0,r4
+err3; lvx vr2,r4,r9
+err3; lvx vr1,r4,r10
+err3; lvx vr0,r4,r11
+ addi r4,r4,64
+err3; stvx vr3,r0,r3
+err3; stvx vr2,r3,r9
+err3; stvx vr1,r3,r10
+err3; stvx vr0,r3,r11
+ addi r3,r3,64
+
+9: bf cr7*4+2,10f
+err3; lvx vr1,r0,r4
+err3; lvx vr0,r4,r9
+ addi r4,r4,32
+err3; stvx vr1,r0,r3
+err3; stvx vr0,r3,r9
+ addi r3,r3,32
+
+10: bf cr7*4+3,11f
+err3; lvx vr1,r0,r4
+ addi r4,r4,16
+err3; stvx vr1,r0,r3
+ addi r3,r3,16
+
+ /* Up to 15B to go */
+11: clrldi r5,r5,(64-4)
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+err3; ld r0,0(r4)
+ addi r4,r4,8
+err3; std r0,0(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+err3; lwz r0,0(r4)
+ addi r4,r4,4
+err3; stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+err3; lhz r0,0(r4)
+ addi r4,r4,2
+err3; sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+err3; lbz r0,0(r4)
+err3; stb r0,0(r3)
+
+15: addi r1,r1,STACKFRAMESIZE
+ b .exit_vmx_copy /* tail call optimise */
+
+.Lvmx_unaligned_copy:
+ /* Get the destination 16B aligned */
+ neg r6,r3
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-4)
+
+ bf cr7*4+3,1f
+err3; lbz r0,0(r4)
+ addi r4,r4,1
+err3; stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+err3; lhz r0,0(r4)
+ addi r4,r4,2
+err3; sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+err3; lwz r0,0(r4)
+ addi r4,r4,4
+err3; stw r0,0(r3)
+ addi r3,r3,4
+
+3: bf cr7*4+0,4f
+err3; lwz r0,0(r4) /* Less chance of a reject with word ops */
+err3; lwz r7,4(r4)
+ addi r4,r4,8
+err3; stw r0,0(r3)
+err3; stw r7,4(r3)
+ addi r3,r3,8
+
+4: sub r5,r5,r6
+
+ /* Get the desination 128B aligned */
+ neg r6,r3
+ srdi r7,r6,4
+ mtocrf 0x01,r7
+ clrldi r6,r6,(64-7)
+
+ li r9,16
+ li r10,32
+ li r11,48
+
+ lvsl vr16,0,r4 /* Setup permute control vector */
+err3; lvx vr0,0,r4
+ addi r4,r4,16
+
+ bf cr7*4+3,5f
+err3; lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+ addi r4,r4,16
+err3; stvx vr8,r0,r3
+ addi r3,r3,16
+ vor vr0,vr1,vr1
+
+5: bf cr7*4+2,6f
+err3; lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+err3; lvx vr0,r4,r9
+ vperm vr9,vr1,vr0,vr16
+ addi r4,r4,32
+err3; stvx vr8,r0,r3
+err3; stvx vr9,r3,r9
+ addi r3,r3,32
+
+6: bf cr7*4+1,7f
+err3; lvx vr3,r0,r4
+ vperm vr8,vr0,vr3,vr16
+err3; lvx vr2,r4,r9
+ vperm vr9,vr3,vr2,vr16
+err3; lvx vr1,r4,r10
+ vperm vr10,vr2,vr1,vr16
+err3; lvx vr0,r4,r11
+ vperm vr11,vr1,vr0,vr16
+ addi r4,r4,64
+err3; stvx vr8,r0,r3
+err3; stvx vr9,r3,r9
+err3; stvx vr10,r3,r10
+err3; stvx vr11,r3,r11
+ addi r3,r3,64
+
+7: sub r5,r5,r6
+ srdi r6,r5,7
+
+ std r14,STK_REG(r14)(r1)
+ std r15,STK_REG(r15)(r1)
+ std r16,STK_REG(r16)(r1)
+
+ li r12,64
+ li r14,80
+ li r15,96
+ li r16,112
+
+ mtctr r6
+
+ /*
+ * Now do cacheline sized loads and stores. By this stage the
+ * cacheline stores are also cacheline aligned.
+ */
+ .align 5
+8:
+err4; lvx vr7,r0,r4
+ vperm vr8,vr0,vr7,vr16
+err4; lvx vr6,r4,r9
+ vperm vr9,vr7,vr6,vr16
+err4; lvx vr5,r4,r10
+ vperm vr10,vr6,vr5,vr16
+err4; lvx vr4,r4,r11
+ vperm vr11,vr5,vr4,vr16
+err4; lvx vr3,r4,r12
+ vperm vr12,vr4,vr3,vr16
+err4; lvx vr2,r4,r14
+ vperm vr13,vr3,vr2,vr16
+err4; lvx vr1,r4,r15
+ vperm vr14,vr2,vr1,vr16
+err4; lvx vr0,r4,r16
+ vperm vr15,vr1,vr0,vr16
+ addi r4,r4,128
+err4; stvx vr8,r0,r3
+err4; stvx vr9,r3,r9
+err4; stvx vr10,r3,r10
+err4; stvx vr11,r3,r11
+err4; stvx vr12,r3,r12
+err4; stvx vr13,r3,r14
+err4; stvx vr14,r3,r15
+err4; stvx vr15,r3,r16
+ addi r3,r3,128
+ bdnz 8b
+
+ ld r14,STK_REG(r14)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r16,STK_REG(r16)(r1)
+
+ /* Up to 127B to go */
+ clrldi r5,r5,(64-7)
+ srdi r6,r5,4
+ mtocrf 0x01,r6
+
+ bf cr7*4+1,9f
+err3; lvx vr3,r0,r4
+ vperm vr8,vr0,vr3,vr16
+err3; lvx vr2,r4,r9
+ vperm vr9,vr3,vr2,vr16
+err3; lvx vr1,r4,r10
+ vperm vr10,vr2,vr1,vr16
+err3; lvx vr0,r4,r11
+ vperm vr11,vr1,vr0,vr16
+ addi r4,r4,64
+err3; stvx vr8,r0,r3
+err3; stvx vr9,r3,r9
+err3; stvx vr10,r3,r10
+err3; stvx vr11,r3,r11
+ addi r3,r3,64
+
+9: bf cr7*4+2,10f
+err3; lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+err3; lvx vr0,r4,r9
+ vperm vr9,vr1,vr0,vr16
+ addi r4,r4,32
+err3; stvx vr8,r0,r3
+err3; stvx vr9,r3,r9
+ addi r3,r3,32
+
+10: bf cr7*4+3,11f
+err3; lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+ addi r4,r4,16
+err3; stvx vr8,r0,r3
+ addi r3,r3,16
+
+ /* Up to 15B to go */
+11: clrldi r5,r5,(64-4)
+ addi r4,r4,-16 /* Unwind the +16 load offset */
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+err3; lwz r0,0(r4) /* Less chance of a reject with word ops */
+err3; lwz r6,4(r4)
+ addi r4,r4,8
+err3; stw r0,0(r3)
+err3; stw r6,4(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+err3; lwz r0,0(r4)
+ addi r4,r4,4
+err3; stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+err3; lhz r0,0(r4)
+ addi r4,r4,2
+err3; sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+err3; lbz r0,0(r4)
+err3; stb r0,0(r3)
+
+15: addi r1,r1,STACKFRAMESIZE
+ b .exit_vmx_copy /* tail call optimise */
+#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/copyuser_power7_vmx.c b/arch/powerpc/lib/copyuser_power7_vmx.c
new file mode 100644
index 0000000..6e1efad
--- /dev/null
+++ b/arch/powerpc/lib/copyuser_power7_vmx.c
@@ -0,0 +1,50 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2011
+ *
+ * Authors: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
+ * Anton Blanchard <anton@au.ibm.com>
+ */
+#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+
+int enter_vmx_copy(void)
+{
+ if (in_interrupt())
+ return 0;
+
+ /* This acts as preempt_disable() as well and will make
+ * enable_kernel_altivec(). We need to disable page faults
+ * as they can call schedule and thus make us lose the VMX
+ * context. So on page faults, we just fail which will cause
+ * a fallback to the normal non-vmx copy.
+ */
+ pagefault_disable();
+
+ enable_kernel_altivec();
+
+ return 1;
+}
+
+/*
+ * This function must return 0 because we tail call optimise when calling
+ * from __copy_tofrom_user_power7 which returns 0 on success.
+ */
+int exit_vmx_copy(void)
+{
+ pagefault_enable();
+ return 0;
+}
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index f60e006..388b95e 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -78,11 +78,7 @@
"tlbwe %1,%3,%5\n"
"tlbwe %0,%3,%6\n"
:
-#ifdef CONFIG_PPC47x
- : "r" (PPC47x_TLB2_S_RWX),
-#else
: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
-#endif
"r" (phys),
"r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
"r" (entry),
@@ -221,7 +217,7 @@
{
u64 size;
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
/* We don't currently support the first MEMBLOCK not mapping 0
* physical on those processors
*/
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 991ee81..3787b61 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -21,6 +21,8 @@
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_hash$(CONFIG_WORD_SIZE).o \
mmu_context_hash$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_PPC_ICSWX) += icswx.o
+obj-$(CONFIG_PPC_ICSWX_PID) += icswx_pid.o
obj-$(CONFIG_40x) += 40x_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke_mmu.o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 5efe8c9..2f0d1b0 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -44,6 +44,8 @@
#include <asm/siginfo.h>
#include <mm/mmu_decl.h>
+#include "icswx.h"
+
#ifdef CONFIG_KPROBES
static inline int notify_page_fault(struct pt_regs *regs)
{
@@ -143,6 +145,21 @@
is_write = error_code & ESR_DST;
#endif /* CONFIG_4xx || CONFIG_BOOKE */
+#ifdef CONFIG_PPC_ICSWX
+ /*
+ * we need to do this early because this "data storage
+ * interrupt" does not update the DAR/DEAR so we don't want to
+ * look at it
+ */
+ if (error_code & ICSWX_DSI_UCT) {
+ int ret;
+
+ ret = acop_handle_fault(regs, address, error_code);
+ if (ret)
+ return ret;
+ }
+#endif
+
if (notify_page_fault(regs))
return 0;
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
index 343ad0b..3bc7006 100644
--- a/arch/powerpc/mm/hugetlbpage-book3e.c
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -37,31 +37,32 @@
return found;
}
-void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte)
+void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
+ pte_t pte)
{
unsigned long mas1, mas2;
u64 mas7_3;
unsigned long psize, tsize, shift;
unsigned long flags;
+ struct mm_struct *mm;
#ifdef CONFIG_PPC_FSL_BOOK3E
- int index, lz, ncams;
- struct vm_area_struct *vma;
+ int index, ncams;
#endif
if (unlikely(is_kernel_addr(ea)))
return;
+ mm = vma->vm_mm;
+
#ifdef CONFIG_PPC_MM_SLICES
- psize = mmu_get_tsize(get_slice_psize(mm, ea));
- tsize = mmu_get_psize(psize);
+ psize = get_slice_psize(mm, ea);
+ tsize = mmu_get_tsize(psize);
shift = mmu_psize_defs[psize].shift;
#else
- vma = find_vma(mm, ea);
- psize = vma_mmu_pagesize(vma); /* returns actual size in bytes */
- asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (psize));
- shift = 31 - lz;
- tsize = 21 - lz;
+ psize = vma_mmu_pagesize(vma);
+ shift = __ilog2(psize);
+ tsize = shift - 10;
#endif
/*
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 8558b57..a8b3cc7 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -29,22 +29,22 @@
/*
* Tracks gpages after the device tree is scanned and before the
- * huge_boot_pages list is ready. On 64-bit implementations, this is
- * just used to track 16G pages and so is a single array. 32-bit
- * implementations may have more than one gpage size due to limitations
- * of the memory allocators, so we need multiple arrays
+ * huge_boot_pages list is ready. On non-Freescale implementations, this is
+ * just used to track 16G pages and so is a single array. FSL-based
+ * implementations may have more than one gpage size, so we need multiple
+ * arrays
*/
-#ifdef CONFIG_PPC64
-#define MAX_NUMBER_GPAGES 1024
-static u64 gpage_freearray[MAX_NUMBER_GPAGES];
-static unsigned nr_gpages;
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
#define MAX_NUMBER_GPAGES 128
struct psize_gpages {
u64 gpage_list[MAX_NUMBER_GPAGES];
unsigned int nr_gpages;
};
static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT];
+#else
+#define MAX_NUMBER_GPAGES 1024
+static u64 gpage_freearray[MAX_NUMBER_GPAGES];
+static unsigned nr_gpages;
#endif
static inline int shift_to_mmu_psize(unsigned int shift)
@@ -115,12 +115,12 @@
struct kmem_cache *cachep;
pte_t *new;
-#ifdef CONFIG_PPC64
- cachep = PGT_CACHE(pdshift - pshift);
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
int i;
int num_hugepd = 1 << (pshift - pdshift);
cachep = hugepte_cache;
+#else
+ cachep = PGT_CACHE(pdshift - pshift);
#endif
new = kmem_cache_zalloc(cachep, GFP_KERNEL|__GFP_REPEAT);
@@ -132,12 +132,7 @@
return -ENOMEM;
spin_lock(&mm->page_table_lock);
-#ifdef CONFIG_PPC64
- if (!hugepd_none(*hpdp))
- kmem_cache_free(cachep, new);
- else
- hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
/*
* We have multiple higher-level entries that point to the same
* actual pte location. Fill in each as we go and backtrack on error.
@@ -156,11 +151,28 @@
hpdp->pd = 0;
kmem_cache_free(cachep, new);
}
+#else
+ if (!hugepd_none(*hpdp))
+ kmem_cache_free(cachep, new);
+ else
+ hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
#endif
spin_unlock(&mm->page_table_lock);
return 0;
}
+/*
+ * These macros define how to determine which level of the page table holds
+ * the hpdp.
+ */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+#define HUGEPD_PGD_SHIFT PGDIR_SHIFT
+#define HUGEPD_PUD_SHIFT PUD_SHIFT
+#else
+#define HUGEPD_PGD_SHIFT PUD_SHIFT
+#define HUGEPD_PUD_SHIFT PMD_SHIFT
+#endif
+
pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
{
pgd_t *pg;
@@ -173,12 +185,13 @@
addr &= ~(sz-1);
pg = pgd_offset(mm, addr);
- if (pshift >= PUD_SHIFT) {
+
+ if (pshift >= HUGEPD_PGD_SHIFT) {
hpdp = (hugepd_t *)pg;
} else {
pdshift = PUD_SHIFT;
pu = pud_alloc(mm, pg, addr);
- if (pshift >= PMD_SHIFT) {
+ if (pshift >= HUGEPD_PUD_SHIFT) {
hpdp = (hugepd_t *)pu;
} else {
pdshift = PMD_SHIFT;
@@ -198,7 +211,7 @@
return hugepte_offset(hpdp, addr, pdshift);
}
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy or bootmem allocator is setup.
*/
@@ -318,7 +331,7 @@
}
}
-#else /* PPC64 */
+#else /* !PPC_FSL_BOOK3E */
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy or bootmem allocator is setup.
@@ -356,7 +369,7 @@
return 0;
}
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
#define HUGEPD_FREELIST_SIZE \
((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t))
@@ -416,11 +429,11 @@
unsigned long pdmask = ~((1UL << pdshift) - 1);
unsigned int num_hugepd = 1;
-#ifdef CONFIG_PPC64
- unsigned int shift = hugepd_shift(*hpdp);
-#else
- /* Note: On 32-bit the hpdp may be the first of several */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ /* Note: On fsl the hpdp may be the first of several */
num_hugepd = (1 << (hugepd_shift(*hpdp) - pdshift));
+#else
+ unsigned int shift = hugepd_shift(*hpdp);
#endif
start &= pdmask;
@@ -438,10 +451,11 @@
hpdp->pd = 0;
tlb->need_flush = 1;
-#ifdef CONFIG_PPC64
- pgtable_free_tlb(tlb, hugepte, pdshift - shift);
-#else
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
hugepd_free(tlb, hugepte);
+#else
+ pgtable_free_tlb(tlb, hugepte, pdshift - shift);
#endif
}
@@ -454,14 +468,23 @@
unsigned long start;
start = addr;
- pmd = pmd_offset(pud, addr);
do {
+ pmd = pmd_offset(pud, addr);
next = pmd_addr_end(addr, end);
if (pmd_none(*pmd))
continue;
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ /*
+ * Increment next by the size of the huge mapping since
+ * there may be more than one entry at this level for a
+ * single hugepage, but all of them point to
+ * the same kmem cache that holds the hugepte.
+ */
+ next = addr + (1 << hugepd_shift(*(hugepd_t *)pmd));
+#endif
free_hugepd_range(tlb, (hugepd_t *)pmd, PMD_SHIFT,
addr, next, floor, ceiling);
- } while (pmd++, addr = next, addr != end);
+ } while (addr = next, addr != end);
start &= PUD_MASK;
if (start < floor)
@@ -488,8 +511,8 @@
unsigned long start;
start = addr;
- pud = pud_offset(pgd, addr);
do {
+ pud = pud_offset(pgd, addr);
next = pud_addr_end(addr, end);
if (!is_hugepd(pud)) {
if (pud_none_or_clear_bad(pud))
@@ -497,10 +520,19 @@
hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
ceiling);
} else {
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ /*
+ * Increment next by the size of the huge mapping since
+ * there may be more than one entry at this level for a
+ * single hugepage, but all of them point to
+ * the same kmem cache that holds the hugepte.
+ */
+ next = addr + (1 << hugepd_shift(*(hugepd_t *)pud));
+#endif
free_hugepd_range(tlb, (hugepd_t *)pud, PUD_SHIFT,
addr, next, floor, ceiling);
}
- } while (pud++, addr = next, addr != end);
+ } while (addr = next, addr != end);
start &= PGDIR_MASK;
if (start < floor)
@@ -555,12 +587,12 @@
continue;
hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
} else {
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
/*
* Increment next by the size of the huge mapping since
- * on 32-bit there may be more than one entry at the pgd
- * level for a single hugepage, but all of them point to
- * the same kmem cache that holds the hugepte.
+ * there may be more than one entry at the pgd level
+ * for a single hugepage, but all of them point to the
+ * same kmem cache that holds the hugepte.
*/
next = addr + (1 << hugepd_shift(*(hugepd_t *)pgd));
#endif
@@ -698,19 +730,17 @@
return 1;
}
+#ifdef CONFIG_PPC_MM_SLICES
unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
unsigned long len, unsigned long pgoff,
unsigned long flags)
{
-#ifdef CONFIG_PPC_MM_SLICES
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
-#else
- return get_unmapped_area(file, addr, len, pgoff, flags);
-#endif
}
+#endif
unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
{
@@ -784,7 +814,7 @@
}
__setup("hugepagesz=", hugepage_setup_sz);
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
struct kmem_cache *hugepte_cache;
static int __init hugetlbpage_init(void)
{
diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c
new file mode 100644
index 0000000..5d9a59e
--- /dev/null
+++ b/arch/powerpc/mm/icswx.c
@@ -0,0 +1,273 @@
+/*
+ * ICSWX and ACOP Management
+ *
+ * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+#include "icswx.h"
+
+/*
+ * The processor and its L2 cache cause the icswx instruction to
+ * generate a COP_REQ transaction on PowerBus. The transaction has no
+ * address, and the processor does not perform an MMU access to
+ * authenticate the transaction. The command portion of the PowerBus
+ * COP_REQ transaction includes the LPAR_ID (LPID) and the coprocessor
+ * Process ID (PID), which the coprocessor compares to the authorized
+ * LPID and PID held in the coprocessor, to determine if the process
+ * is authorized to generate the transaction. The data of the COP_REQ
+ * transaction is 128-byte or less in size and is placed in cacheable
+ * memory on a 128-byte cache line boundary.
+ *
+ * The task to use a coprocessor should use use_cop() to mark the use
+ * of the Coprocessor Type (CT) and context switching. On a server
+ * class processor, the PID register is used only for coprocessor
+ * management + * and so a coprocessor PID is allocated before
+ * executing icswx + * instruction. Drop_cop() is used to free the
+ * coprocessor PID.
+ *
+ * Example:
+ * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
+ * Each HFI have multiple windows. Each HFI window serves as a
+ * network device sending to and receiving from HFI network.
+ * HFI immediate send function uses icswx instruction. The immediate
+ * send function allows small (single cache-line) packets be sent
+ * without using the regular HFI send FIFO and doorbell, which are
+ * much slower than immediate send.
+ *
+ * For each task intending to use HFI immediate send, the HFI driver
+ * calls use_cop() to obtain a coprocessor PID for the task.
+ * The HFI driver then allocate a free HFI window and save the
+ * coprocessor PID to the HFI window to allow the task to use the
+ * HFI window.
+ *
+ * The HFI driver repeatedly creates immediate send packets and
+ * issues icswx instruction to send data through the HFI window.
+ * The HFI compares the coprocessor PID in the CPU PID register
+ * to the PID held in the HFI window to determine if the transaction
+ * is allowed.
+ *
+ * When the task to release the HFI window, the HFI driver calls
+ * drop_cop() to release the coprocessor PID.
+ */
+
+void switch_cop(struct mm_struct *next)
+{
+#ifdef CONFIG_ICSWX_PID
+ mtspr(SPRN_PID, next->context.cop_pid);
+#endif
+ mtspr(SPRN_ACOP, next->context.acop);
+}
+
+/**
+ * Start using a coprocessor.
+ * @acop: mask of coprocessor to be used.
+ * @mm: The mm the coprocessor to associate with. Most likely current mm.
+ *
+ * Return a positive PID if successful. Negative errno otherwise.
+ * The returned PID will be fed to the coprocessor to determine if an
+ * icswx transaction is authenticated.
+ */
+int use_cop(unsigned long acop, struct mm_struct *mm)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_ICSWX))
+ return -ENODEV;
+
+ if (!mm || !acop)
+ return -EINVAL;
+
+ /* The page_table_lock ensures mm_users won't change under us */
+ spin_lock(&mm->page_table_lock);
+ spin_lock(mm->context.cop_lockp);
+
+ ret = get_cop_pid(mm);
+ if (ret < 0)
+ goto out;
+
+ /* update acop */
+ mm->context.acop |= acop;
+
+ sync_cop(mm);
+
+ /*
+ * If this is a threaded process then there might be other threads
+ * running. We need to send an IPI to force them to pick up any
+ * change in PID and ACOP.
+ */
+ if (atomic_read(&mm->mm_users) > 1)
+ smp_call_function(sync_cop, mm, 1);
+
+out:
+ spin_unlock(mm->context.cop_lockp);
+ spin_unlock(&mm->page_table_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(use_cop);
+
+/**
+ * Stop using a coprocessor.
+ * @acop: mask of coprocessor to be stopped.
+ * @mm: The mm the coprocessor associated with.
+ */
+void drop_cop(unsigned long acop, struct mm_struct *mm)
+{
+ int free_pid;
+
+ if (!cpu_has_feature(CPU_FTR_ICSWX))
+ return;
+
+ if (WARN_ON_ONCE(!mm))
+ return;
+
+ /* The page_table_lock ensures mm_users won't change under us */
+ spin_lock(&mm->page_table_lock);
+ spin_lock(mm->context.cop_lockp);
+
+ mm->context.acop &= ~acop;
+
+ free_pid = disable_cop_pid(mm);
+ sync_cop(mm);
+
+ /*
+ * If this is a threaded process then there might be other threads
+ * running. We need to send an IPI to force them to pick up any
+ * change in PID and ACOP.
+ */
+ if (atomic_read(&mm->mm_users) > 1)
+ smp_call_function(sync_cop, mm, 1);
+
+ if (free_pid != COP_PID_NONE)
+ free_cop_pid(free_pid);
+
+ spin_unlock(mm->context.cop_lockp);
+ spin_unlock(&mm->page_table_lock);
+}
+EXPORT_SYMBOL_GPL(drop_cop);
+
+static int acop_use_cop(int ct)
+{
+ /* todo */
+ return -1;
+}
+
+/*
+ * Get the instruction word at the NIP
+ */
+static u32 acop_get_inst(struct pt_regs *regs)
+{
+ u32 inst;
+ u32 __user *p;
+
+ p = (u32 __user *)regs->nip;
+ if (!access_ok(VERIFY_READ, p, sizeof(*p)))
+ return 0;
+
+ if (__get_user(inst, p))
+ return 0;
+
+ return inst;
+}
+
+/**
+ * @regs: regsiters at time of interrupt
+ * @address: storage address
+ * @error_code: Fault code, usually the DSISR or ESR depending on
+ * processor type
+ *
+ * Return 0 if we are able to resolve the data storage fault that
+ * results from a CT miss in the ACOP register.
+ */
+int acop_handle_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+ int ct;
+ u32 inst = 0;
+
+ if (!cpu_has_feature(CPU_FTR_ICSWX)) {
+ pr_info("No coprocessors available");
+ _exception(SIGILL, regs, ILL_ILLOPN, address);
+ }
+
+ if (!user_mode(regs)) {
+ /* this could happen if the HV denies the
+ * kernel access, for now we just die */
+ die("ICSWX from kernel failed", regs, SIGSEGV);
+ }
+
+ /* Some implementations leave us a hint for the CT */
+ ct = ICSWX_GET_CT_HINT(error_code);
+ if (ct < 0) {
+ /* we have to peek at the instruction word to figure out CT */
+ u32 ccw;
+ u32 rs;
+
+ inst = acop_get_inst(regs);
+ if (inst == 0)
+ return -1;
+
+ rs = (inst >> (31 - 10)) & 0x1f;
+ ccw = regs->gpr[rs];
+ ct = (ccw >> 16) & 0x3f;
+ }
+
+ if (!acop_use_cop(ct))
+ return 0;
+
+ /* at this point the CT is unknown to the system */
+ pr_warn("%s[%d]: Coprocessor %d is unavailable",
+ current->comm, current->pid, ct);
+
+ /* get inst if we don't already have it */
+ if (inst == 0) {
+ inst = acop_get_inst(regs);
+ if (inst == 0)
+ return -1;
+ }
+
+ /* Check if the instruction is the "record form" */
+ if (inst & 1) {
+ /*
+ * the instruction is "record" form so we can reject
+ * using CR0
+ */
+ regs->ccr &= ~(0xful << 28);
+ regs->ccr |= ICSWX_RC_NOT_FOUND << 28;
+
+ /* Move on to the next instruction */
+ regs->nip += 4;
+ } else {
+ /*
+ * There is no architected mechanism to report a bad
+ * CT so we could either SIGILL or report nothing.
+ * Since the non-record version should only bu used
+ * for "hints" or "don't care" we should probably do
+ * nothing. However, I could see how some people
+ * might want an SIGILL so it here if you want it.
+ */
+#ifdef CONFIG_PPC_ICSWX_USE_SIGILL
+ _exception(SIGILL, regs, ILL_ILLOPN, address);
+#else
+ regs->nip += 4;
+#endif
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acop_handle_fault);
diff --git a/arch/powerpc/mm/icswx.h b/arch/powerpc/mm/icswx.h
new file mode 100644
index 0000000..42176bd
--- /dev/null
+++ b/arch/powerpc/mm/icswx.h
@@ -0,0 +1,62 @@
+#ifndef _ARCH_POWERPC_MM_ICSWX_H_
+#define _ARCH_POWERPC_MM_ICSWX_H_
+
+/*
+ * ICSWX and ACOP Management
+ *
+ * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/mmu_context.h>
+
+/* also used to denote that PIDs are not used */
+#define COP_PID_NONE 0
+
+static inline void sync_cop(void *arg)
+{
+ struct mm_struct *mm = arg;
+
+ if (mm == current->active_mm)
+ switch_cop(current->active_mm);
+}
+
+#ifdef CONFIG_PPC_ICSWX_PID
+extern int get_cop_pid(struct mm_struct *mm);
+extern int disable_cop_pid(struct mm_struct *mm);
+extern void free_cop_pid(int free_pid);
+#else
+#define get_cop_pid(m) (COP_PID_NONE)
+#define disable_cop_pid(m) (COP_PID_NONE)
+#define free_cop_pid(p)
+#endif
+
+/*
+ * These are implementation bits for architected registers. If this
+ * ever becomes architecture the should be moved to reg.h et. al.
+ */
+/* UCT is the same bit for Server and Embedded */
+#define ICSWX_DSI_UCT 0x00004000 /* Unavailable Coprocessor Type */
+
+#ifdef CONFIG_PPC_BOOK3E
+/* Embedded implementation gives us no hints as to what the CT is */
+#define ICSWX_GET_CT_HINT(x) (-1)
+#else
+/* Server implementation contains the CT value in the DSISR */
+#define ICSWX_DSISR_CTMASK 0x00003f00
+#define ICSWX_GET_CT_HINT(x) (((x) & ICSWX_DSISR_CTMASK) >> 8)
+#endif
+
+#define ICSWX_RC_STARTED 0x8 /* The request has been started */
+#define ICSWX_RC_NOT_IDLE 0x4 /* No coprocessor found idle */
+#define ICSWX_RC_NOT_FOUND 0x2 /* No coprocessor found */
+#define ICSWX_RC_UNDEFINED 0x1 /* Reserved */
+
+extern int acop_handle_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code);
+#endif /* !_ARCH_POWERPC_MM_ICSWX_H_ */
diff --git a/arch/powerpc/mm/icswx_pid.c b/arch/powerpc/mm/icswx_pid.c
new file mode 100644
index 0000000..91e30eb
--- /dev/null
+++ b/arch/powerpc/mm/icswx_pid.c
@@ -0,0 +1,87 @@
+/*
+ * ICSWX and ACOP/PID Management
+ *
+ * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include "icswx.h"
+
+#define COP_PID_MIN (COP_PID_NONE + 1)
+#define COP_PID_MAX (0xFFFF)
+
+static DEFINE_SPINLOCK(mmu_context_acop_lock);
+static DEFINE_IDA(cop_ida);
+
+static int new_cop_pid(struct ida *ida, int min_id, int max_id,
+ spinlock_t *lock)
+{
+ int index;
+ int err;
+
+again:
+ if (!ida_pre_get(ida, GFP_KERNEL))
+ return -ENOMEM;
+
+ spin_lock(lock);
+ err = ida_get_new_above(ida, min_id, &index);
+ spin_unlock(lock);
+
+ if (err == -EAGAIN)
+ goto again;
+ else if (err)
+ return err;
+
+ if (index > max_id) {
+ spin_lock(lock);
+ ida_remove(ida, index);
+ spin_unlock(lock);
+ return -ENOMEM;
+ }
+
+ return index;
+}
+
+int get_cop_pid(struct mm_struct *mm)
+{
+ int pid;
+
+ if (mm->context.cop_pid == COP_PID_NONE) {
+ pid = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
+ &mmu_context_acop_lock);
+ if (pid >= 0)
+ mm->context.cop_pid = pid;
+ }
+ return mm->context.cop_pid;
+}
+
+int disable_cop_pid(struct mm_struct *mm)
+{
+ int free_pid = COP_PID_NONE;
+
+ if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
+ free_pid = mm->context.cop_pid;
+ mm->context.cop_pid = COP_PID_NONE;
+ }
+ return free_pid;
+}
+
+void free_cop_pid(int free_pid)
+{
+ spin_lock(&mmu_context_acop_lock);
+ ida_remove(&cop_ida, free_pid);
+ spin_unlock(&mmu_context_acop_lock);
+}
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 161cefd..6157be2 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -65,6 +65,13 @@
EXPORT_SYMBOL(memstart_addr);
phys_addr_t kernstart_addr;
EXPORT_SYMBOL(kernstart_addr);
+
+#ifdef CONFIG_RELOCATABLE_PPC32
+/* Used in __va()/__pa() */
+long long virt_phys_offset;
+EXPORT_SYMBOL(virt_phys_offset);
+#endif
+
phys_addr_t lowmem_end_addr;
int boot_mapsize;
@@ -134,8 +141,7 @@
if (memblock.memory.cnt > 1) {
#ifndef CONFIG_WII
- memblock.memory.cnt = 1;
- memblock_analyze();
+ memblock_enforce_memory_limit(memblock.memory.regions[0].size);
printk(KERN_WARNING "Only using first contiguous memory region");
#else
wii_memory_fixups();
@@ -158,7 +164,6 @@
#ifndef CONFIG_HIGHMEM
total_memory = total_lowmem;
memblock_enforce_memory_limit(total_lowmem);
- memblock_analyze();
#endif /* CONFIG_HIGHMEM */
}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 2dd6bdd..d974b79 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -51,6 +51,7 @@
#include <asm/vdso.h>
#include <asm/fixmap.h>
#include <asm/swiotlb.h>
+#include <asm/rtas.h>
#include "mmu_decl.h"
@@ -199,7 +200,7 @@
unsigned long start_pfn, end_pfn;
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);
- add_active_range(0, start_pfn, end_pfn);
+ memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
}
/* Add all physical memory to the bootmem map, mark each area
@@ -553,7 +554,7 @@
#if (defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_PPC_FSL_BOOK3E)) \
&& defined(CONFIG_HUGETLB_PAGE)
if (is_vm_hugetlb_page(vma))
- book3e_hugetlb_preload(vma->vm_mm, address, *ptep);
+ book3e_hugetlb_preload(vma, address, *ptep);
#endif
}
@@ -585,3 +586,23 @@
return 0;
}
subsys_initcall(add_system_ram_resources);
+
+#ifdef CONFIG_STRICT_DEVMEM
+/*
+ * devmem_is_allowed(): check to see if /dev/mem access to a certain address
+ * is valid. The argument is a physical page number.
+ *
+ * Access has to be given to non-kernel-ram areas as well, these contain the
+ * PCI mmio resources as well as potential bios/acpi data regions.
+ */
+int devmem_is_allowed(unsigned long pfn)
+{
+ if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+ return 0;
+ if (!page_is_ram(pfn))
+ return 1;
+ if (page_is_rtas_user_buf(pfn))
+ return 1;
+ return 0;
+}
+#endif /* CONFIG_STRICT_DEVMEM */
diff --git a/arch/powerpc/mm/mmap_64.c b/arch/powerpc/mm/mmap_64.c
index 5a783d8..67a42ed 100644
--- a/arch/powerpc/mm/mmap_64.c
+++ b/arch/powerpc/mm/mmap_64.c
@@ -53,14 +53,6 @@
return sysctl_legacy_va_layout;
}
-/*
- * Since get_random_int() returns the same value within a 1 jiffy window,
- * we will almost always get the same randomisation for the stack and mmap
- * region. This will mean the relative distance between stack and mmap will
- * be the same.
- *
- * To avoid this we can shift the randomness by 1 bit.
- */
static unsigned long mmap_rnd(void)
{
unsigned long rnd = 0;
@@ -68,11 +60,11 @@
if (current->flags & PF_RANDOMIZE) {
/* 8MB for 32bit, 1GB for 64bit */
if (is_32bit_task())
- rnd = (long)(get_random_int() % (1<<(22-PAGE_SHIFT)));
+ rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT)));
else
- rnd = (long)(get_random_int() % (1<<(29-PAGE_SHIFT)));
+ rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT)));
}
- return (rnd << PAGE_SHIFT) * 2;
+ return rnd << PAGE_SHIFT;
}
static inline unsigned long mmap_base(void)
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index ca988a3..40677aa 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -24,200 +24,7 @@
#include <asm/mmu_context.h>
-#ifdef CONFIG_PPC_ICSWX
-/*
- * The processor and its L2 cache cause the icswx instruction to
- * generate a COP_REQ transaction on PowerBus. The transaction has
- * no address, and the processor does not perform an MMU access
- * to authenticate the transaction. The command portion of the
- * PowerBus COP_REQ transaction includes the LPAR_ID (LPID) and
- * the coprocessor Process ID (PID), which the coprocessor compares
- * to the authorized LPID and PID held in the coprocessor, to determine
- * if the process is authorized to generate the transaction.
- * The data of the COP_REQ transaction is 128-byte or less and is
- * placed in cacheable memory on a 128-byte cache line boundary.
- *
- * The task to use a coprocessor should use use_cop() to allocate
- * a coprocessor PID before executing icswx instruction. use_cop()
- * also enables the coprocessor context switching. Drop_cop() is
- * used to free the coprocessor PID.
- *
- * Example:
- * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
- * Each HFI have multiple windows. Each HFI window serves as a
- * network device sending to and receiving from HFI network.
- * HFI immediate send function uses icswx instruction. The immediate
- * send function allows small (single cache-line) packets be sent
- * without using the regular HFI send FIFO and doorbell, which are
- * much slower than immediate send.
- *
- * For each task intending to use HFI immediate send, the HFI driver
- * calls use_cop() to obtain a coprocessor PID for the task.
- * The HFI driver then allocate a free HFI window and save the
- * coprocessor PID to the HFI window to allow the task to use the
- * HFI window.
- *
- * The HFI driver repeatedly creates immediate send packets and
- * issues icswx instruction to send data through the HFI window.
- * The HFI compares the coprocessor PID in the CPU PID register
- * to the PID held in the HFI window to determine if the transaction
- * is allowed.
- *
- * When the task to release the HFI window, the HFI driver calls
- * drop_cop() to release the coprocessor PID.
- */
-
-#define COP_PID_NONE 0
-#define COP_PID_MIN (COP_PID_NONE + 1)
-#define COP_PID_MAX (0xFFFF)
-
-static DEFINE_SPINLOCK(mmu_context_acop_lock);
-static DEFINE_IDA(cop_ida);
-
-void switch_cop(struct mm_struct *next)
-{
- mtspr(SPRN_PID, next->context.cop_pid);
- mtspr(SPRN_ACOP, next->context.acop);
-}
-
-static int new_cop_pid(struct ida *ida, int min_id, int max_id,
- spinlock_t *lock)
-{
- int index;
- int err;
-
-again:
- if (!ida_pre_get(ida, GFP_KERNEL))
- return -ENOMEM;
-
- spin_lock(lock);
- err = ida_get_new_above(ida, min_id, &index);
- spin_unlock(lock);
-
- if (err == -EAGAIN)
- goto again;
- else if (err)
- return err;
-
- if (index > max_id) {
- spin_lock(lock);
- ida_remove(ida, index);
- spin_unlock(lock);
- return -ENOMEM;
- }
-
- return index;
-}
-
-static void sync_cop(void *arg)
-{
- struct mm_struct *mm = arg;
-
- if (mm == current->active_mm)
- switch_cop(current->active_mm);
-}
-
-/**
- * Start using a coprocessor.
- * @acop: mask of coprocessor to be used.
- * @mm: The mm the coprocessor to associate with. Most likely current mm.
- *
- * Return a positive PID if successful. Negative errno otherwise.
- * The returned PID will be fed to the coprocessor to determine if an
- * icswx transaction is authenticated.
- */
-int use_cop(unsigned long acop, struct mm_struct *mm)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_ICSWX))
- return -ENODEV;
-
- if (!mm || !acop)
- return -EINVAL;
-
- /* The page_table_lock ensures mm_users won't change under us */
- spin_lock(&mm->page_table_lock);
- spin_lock(mm->context.cop_lockp);
-
- if (mm->context.cop_pid == COP_PID_NONE) {
- ret = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
- &mmu_context_acop_lock);
- if (ret < 0)
- goto out;
-
- mm->context.cop_pid = ret;
- }
- mm->context.acop |= acop;
-
- sync_cop(mm);
-
- /*
- * If this is a threaded process then there might be other threads
- * running. We need to send an IPI to force them to pick up any
- * change in PID and ACOP.
- */
- if (atomic_read(&mm->mm_users) > 1)
- smp_call_function(sync_cop, mm, 1);
-
- ret = mm->context.cop_pid;
-
-out:
- spin_unlock(mm->context.cop_lockp);
- spin_unlock(&mm->page_table_lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(use_cop);
-
-/**
- * Stop using a coprocessor.
- * @acop: mask of coprocessor to be stopped.
- * @mm: The mm the coprocessor associated with.
- */
-void drop_cop(unsigned long acop, struct mm_struct *mm)
-{
- int free_pid = COP_PID_NONE;
-
- if (!cpu_has_feature(CPU_FTR_ICSWX))
- return;
-
- if (WARN_ON_ONCE(!mm))
- return;
-
- /* The page_table_lock ensures mm_users won't change under us */
- spin_lock(&mm->page_table_lock);
- spin_lock(mm->context.cop_lockp);
-
- mm->context.acop &= ~acop;
-
- if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
- free_pid = mm->context.cop_pid;
- mm->context.cop_pid = COP_PID_NONE;
- }
-
- sync_cop(mm);
-
- /*
- * If this is a threaded process then there might be other threads
- * running. We need to send an IPI to force them to pick up any
- * change in PID and ACOP.
- */
- if (atomic_read(&mm->mm_users) > 1)
- smp_call_function(sync_cop, mm, 1);
-
- if (free_pid != COP_PID_NONE) {
- spin_lock(&mmu_context_acop_lock);
- ida_remove(&cop_ida, free_pid);
- spin_unlock(&mmu_context_acop_lock);
- }
-
- spin_unlock(mm->context.cop_lockp);
- spin_unlock(&mm->page_table_lock);
-}
-EXPORT_SYMBOL_GPL(drop_cop);
-
-#endif /* CONFIG_PPC_ICSWX */
+#include "icswx.h"
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b22a83a..4ff3d8e 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -127,45 +127,25 @@
}
/*
- * get_active_region_work_fn - A helper function for get_node_active_region
- * Returns datax set to the start_pfn and end_pfn if they contain
- * the initial value of datax->start_pfn between them
- * @start_pfn: start page(inclusive) of region to check
- * @end_pfn: end page(exclusive) of region to check
- * @datax: comes in with ->start_pfn set to value to search for and
- * goes out with active range if it contains it
- * Returns 1 if search value is in range else 0
- */
-static int __init get_active_region_work_fn(unsigned long start_pfn,
- unsigned long end_pfn, void *datax)
-{
- struct node_active_region *data;
- data = (struct node_active_region *)datax;
-
- if (start_pfn <= data->start_pfn && end_pfn > data->start_pfn) {
- data->start_pfn = start_pfn;
- data->end_pfn = end_pfn;
- return 1;
- }
- return 0;
-
-}
-
-/*
- * get_node_active_region - Return active region containing start_pfn
+ * get_node_active_region - Return active region containing pfn
* Active range returned is empty if none found.
- * @start_pfn: The page to return the region for.
- * @node_ar: Returned set to the active region containing start_pfn
+ * @pfn: The page to return the region for
+ * @node_ar: Returned set to the active region containing @pfn
*/
-static void __init get_node_active_region(unsigned long start_pfn,
- struct node_active_region *node_ar)
+static void __init get_node_active_region(unsigned long pfn,
+ struct node_active_region *node_ar)
{
- int nid = early_pfn_to_nid(start_pfn);
+ unsigned long start_pfn, end_pfn;
+ int i, nid;
- node_ar->nid = nid;
- node_ar->start_pfn = start_pfn;
- node_ar->end_pfn = start_pfn;
- work_with_active_regions(nid, get_active_region_work_fn, node_ar);
+ for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
+ if (pfn >= start_pfn && pfn < end_pfn) {
+ node_ar->nid = nid;
+ node_ar->start_pfn = start_pfn;
+ node_ar->end_pfn = end_pfn;
+ break;
+ }
+ }
}
static void map_cpu_to_node(int cpu, int node)
@@ -406,7 +386,7 @@
of_node_put(memory);
}
-static unsigned long __devinit read_n_cells(int n, const unsigned int **buf)
+static unsigned long read_n_cells(int n, const unsigned int **buf)
{
unsigned long result = 0;
@@ -521,7 +501,7 @@
aa->n_arrays = *prop++;
aa->array_sz = *prop++;
- /* Now that we know the number of arrrays and size of each array,
+ /* Now that we know the number of arrays and size of each array,
* revalidate the size of the property read in.
*/
if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
@@ -710,9 +690,7 @@
node_set_online(nid);
sz = numa_enforce_memory_limit(base, size);
if (sz)
- add_active_range(nid, base >> PAGE_SHIFT,
- (base >> PAGE_SHIFT)
- + (sz >> PAGE_SHIFT));
+ memblock_set_node(base, sz, nid);
} while (--ranges);
}
}
@@ -802,8 +780,7 @@
continue;
}
- add_active_range(nid, start >> PAGE_SHIFT,
- (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+ memblock_set_node(start, size, nid);
if (--ranges)
goto new_range;
@@ -839,7 +816,8 @@
end_pfn = memblock_region_memory_end_pfn(reg);
fake_numa_create_new_node(end_pfn, &nid);
- add_active_range(nid, start_pfn, end_pfn);
+ memblock_set_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), nid);
node_set_online(nid);
}
}
@@ -969,7 +947,7 @@
.priority = 1 /* Must run before sched domains notifier. */
};
-static void mark_reserved_regions_for_nid(int nid)
+static void __init mark_reserved_regions_for_nid(int nid)
{
struct pglist_data *node = NODE_DATA(nid);
struct memblock_region *reg;
@@ -1462,7 +1440,7 @@
{
int cpu, nid, old_nid;
unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
- struct sys_device *sysdev;
+ struct device *dev;
for_each_cpu(cpu,&cpu_associativity_changes_mask) {
vphn_get_associativity(cpu, associativity);
@@ -1483,9 +1461,9 @@
register_cpu_under_node(cpu, nid);
put_online_cpus();
- sysdev = get_cpu_sysdev(cpu);
- if (sysdev)
- kobject_uevent(&sysdev->kobj, KOBJ_CHANGE);
+ dev = get_cpu_device(cpu);
+ if (dev)
+ kobject_uevent(&dev->kobj, KOBJ_CHANGE);
}
return 1;
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index dc4a5f3..ff672bd 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -94,11 +94,11 @@
srdi r15,r16,60 /* get region */
rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
- bne- dtlb_miss_fault_bolted
+ bne- dtlb_miss_fault_bolted /* Bail if fault addr is invalid */
rlwinm r10,r11,32-19,27,27
rlwimi r10,r11,32-16,19,19
- cmpwi r15,0
+ cmpwi r15,0 /* user vs kernel check */
ori r10,r10,_PAGE_PRESENT
oris r11,r10,_PAGE_ACCESSED@h
@@ -120,44 +120,38 @@
rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
cmpldi cr0,r14,0
clrrdi r15,r15,3
- beq tlb_miss_fault_bolted
+ beq tlb_miss_fault_bolted /* No PGDIR, bail */
BEGIN_MMU_FTR_SECTION
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
PPC_TLBSRX_DOT(0,r16)
- ldx r14,r14,r15
- beq normal_tlb_miss_done
+ ldx r14,r14,r15 /* grab pgd entry */
+ beq normal_tlb_miss_done /* tlb exists already, bail */
MMU_FTR_SECTION_ELSE
- ldx r14,r14,r15
+ ldx r14,r14,r15 /* grab pgd entry */
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
#ifndef CONFIG_PPC_64K_PAGES
rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
clrrdi r15,r15,3
-
- cmpldi cr0,r14,0
- beq tlb_miss_fault_bolted
-
- ldx r14,r14,r15
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted /* Bad pgd entry or hugepage; bail */
+ ldx r14,r14,r15 /* grab pud entry */
#endif /* CONFIG_PPC_64K_PAGES */
rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
clrrdi r15,r15,3
-
- cmpldi cr0,r14,0
- beq tlb_miss_fault_bolted
-
- ldx r14,r14,r15
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted
+ ldx r14,r14,r15 /* Grab pmd entry */
rldicl r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3
clrrdi r15,r15,3
-
- cmpldi cr0,r14,0
- beq tlb_miss_fault_bolted
-
- ldx r14,r14,r15
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted
+ ldx r14,r14,r15 /* Grab PTE, normal (!huge) page */
/* Check if required permissions are met */
andc. r15,r11,r14
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 4e13d6f..df32a83 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -52,7 +52,7 @@
* indirect page table entries.
*/
#ifdef CONFIG_PPC_BOOK3E_MMU
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
[MMU_PAGE_4K] = {
.shift = 12,
@@ -615,7 +615,6 @@
/* limit memory so we dont have linear faults */
memblock_enforce_memory_limit(linear_map_top);
- memblock_analyze();
patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e);
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 1530229..a392d12 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -1,19 +1,3 @@
-#config BUBINGA
-# bool "Bubinga"
-# depends on 40x
-# default n
-# select 405EP
-# help
-# This option enables support for the IBM 405EP evaluation board.
-
-#config CPCI405
-# bool "CPCI405"
-# depends on 40x
-# default n
-# select 405GP
-# help
-# This option enables support for the CPCI405 board.
-
config ACADIA
bool "Acadia"
depends on 40x
@@ -65,14 +49,6 @@
help
This option enables support for the AMCC PPC405EX board.
-#config SYCAMORE
-# bool "Sycamore"
-# depends on 40x
-# default n
-# select 405GPR
-# help
-# This option enables support for the IBM PPC405GPr evaluation board.
-
config WALNUT
bool "Walnut"
depends on 40x
@@ -100,6 +76,16 @@
Most Virtex designs should use this unless it needs to do some
special configuration at board probe time.
+config OBS600
+ bool "OpenBlockS 600"
+ depends on 40x
+ default n
+ select 405EX
+ select PPC40x_SIMPLE
+ help
+ This option enables support for PlatHome OpenBlockS 600 server
+
+
config PPC40x_SIMPLE
bool "Simple PowerPC 40x board support"
depends on 40x
@@ -173,16 +159,11 @@
config IBM405_ERR51
bool
-#config BIOS_FIXUP
-# bool
-# depends on BUBINGA || EP405 || SYCAMORE || WALNUT
-# default y
-
-#config PPC4xx_DMA
-# bool "PPC4xx DMA controller support"
-# depends on 4xx
-
-#config PPC4xx_EDMA
-# bool
-# depends on !STB03xxx && PPC4xx_DMA
-# default y
+config APM8018X
+ bool "APM8018X"
+ depends on 40x
+ default n
+ select PPC40x_SIMPLE
+ help
+ This option enables support for the AppliedMicro APM8018X evaluation
+ board.
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index e8dd5c5..9761206 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -55,7 +55,9 @@
"amcc,haleakala",
"amcc,kilauea",
"amcc,makalu",
- "est,hotfoot"
+ "apm,klondike",
+ "est,hotfoot",
+ "plathome,obs600"
};
static int __init ppc40x_probe(void)
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 762322c..fcf6bf2 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -75,7 +75,7 @@
select PCI
select PPC4xx_PCI_EXPRESS
select PCI_MSI
- select PCC4xx_MSI
+ select PPC4xx_MSI
help
This option enables support for the AMCC PPC440SPe evaluation board.
@@ -186,6 +186,16 @@
help
This option enables support for the IBM ISS simulation environment
+config CURRITUCK
+ bool "IBM Currituck (476fpe) Support"
+ depends on PPC_47x
+ default n
+ select SWIOTLB
+ select 476FPE
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the IBM Currituck (476fpe) evaluation board
+
config ICON
bool "Icon"
depends on 44x
@@ -197,22 +207,6 @@
help
This option enables support for the AMCC PPC440SPe evaluation board.
-#config LUAN
-# bool "Luan"
-# depends on 44x
-# default n
-# select 440SP
-# help
-# This option enables support for the IBM PPC440SP evaluation board.
-
-#config OCOTEA
-# bool "Ocotea"
-# depends on 44x
-# default n
-# select 440GX
-# help
-# This option enables support for the IBM PPC440GX evaluation board.
-
config XILINX_VIRTEX440_GENERIC_BOARD
bool "Generic Xilinx Virtex 5 FXT board support"
depends on 44x
@@ -308,6 +302,10 @@
select IBM_EMAC_ZMII
select IBM_EMAC_TAH
+config 476FPE
+ bool
+ select PPC_FPU
+
config APM821xx
bool
select PPC_FPU
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 553db60..d03833a 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,3 +10,4 @@
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
obj-$(CONFIG_ISS4xx) += iss4xx.o
obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
+obj-$(CONFIG_CURRITUCK) += currituck.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
new file mode 100644
index 0000000..3f6229b
--- /dev/null
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -0,0 +1,204 @@
+/*
+ * Currituck board specific routines
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ * Copyright © 2011 David Kliekamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+#include <linux/pci.h>
+
+static __initdata struct of_device_id ppc47x_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,plb6", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+/* The EEPROM is missing and the default values are bogus. This forces USB in
+ * to EHCI mode */
+static void __devinit quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+ if (of_machine_is_compatible("ibm,currituck")) {
+ pci_write_config_dword(dev, 0xe0, 0x0114231f);
+ pci_write_config_dword(dev, 0xe4, 0x00006c40);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+static int __init ppc47x_device_probe(void)
+{
+ of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init ppc47x_init_irq(void)
+{
+ struct device_node *np;
+
+ /* Find top level interrupt controller */
+ for_each_node_with_property(np, "interrupt-controller") {
+ if (of_get_property(np, "interrupts", NULL) == NULL)
+ break;
+ }
+ if (np == NULL)
+ panic("Can't find top level interrupt controller");
+
+ /* Check type and do appropriate initialization */
+ if (of_device_is_compatible(np, "chrp,open-pic")) {
+ /* The MPIC driver will get everything it needs from the
+ * device-tree, just pass 0 to all arguments
+ */
+ struct mpic *mpic =
+ mpic_alloc(np, 0, 0, 0, 0, " MPIC ");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+ ppc_md.get_irq = mpic_get_irq;
+ } else
+ panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_ppc47x_setup_cpu(int cpu)
+{
+ mpic_setup_this_cpu();
+}
+
+static int __cpuinit smp_ppc47x_kick_cpu(int cpu)
+{
+ struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+ const u64 *spin_table_addr_prop;
+ u32 *spin_table;
+ extern void start_secondary_47x(void);
+
+ BUG_ON(cpunode == NULL);
+
+ /* Assume spin table. We could test for the enable-method in
+ * the device-tree but currently there's little point as it's
+ * our only supported method
+ */
+ spin_table_addr_prop =
+ of_get_property(cpunode, "cpu-release-addr", NULL);
+
+ if (spin_table_addr_prop == NULL) {
+ pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+ cpu);
+ return 1;
+ }
+
+ /* Assume it's mapped as part of the linear mapping. This is a bit
+ * fishy but will work fine for now
+ *
+ * XXX: Is there any reason to assume differently?
+ */
+ spin_table = (u32 *)__va(*spin_table_addr_prop);
+ pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+ spin_table[3] = cpu;
+ smp_wmb();
+ spin_table[1] = __pa(start_secondary_47x);
+ mb();
+
+ return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+ .probe = smp_mpic_probe,
+ .message_pass = smp_mpic_message_pass,
+ .setup_cpu = smp_ppc47x_setup_cpu,
+ .kick_cpu = smp_ppc47x_kick_cpu,
+ .give_timebase = smp_generic_give_timebase,
+ .take_timebase = smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+ if (mmu_has_feature(MMU_FTR_TYPE_47x))
+ smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+ /* No need to check the DMA config as we /know/ our windows are all of
+ * RAM. Lets hope that doesn't change */
+#ifdef CONFIG_SWIOTLB
+ if (memblock_end_of_DRAM() > 0xffffffff) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+ ppc47x_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
+ return 0;
+
+ return 1;
+}
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+ if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+ dev->device == 0x00e0)) {
+ dev->irq = irq_create_mapping(NULL, 47);
+ pr_info("%s: Mapping irq 47 %d\n", __func__, dev->irq);
+ }
+}
+
+define_machine(ppc47x) {
+ .name = "PowerPC 47x",
+ .probe = ppc47x_probe,
+ .progress = udbg_progress,
+ .init_IRQ = ppc47x_init_irq,
+ .setup_arch = ppc47x_setup_arch,
+ .pci_irq_fixup = ppc47x_pci_irq_fixup,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
index 19395f1..5b8cdbb 100644
--- a/arch/powerpc/platforms/44x/iss4xx.c
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -71,7 +71,7 @@
/* The MPIC driver will get everything it needs from the
* device-tree, just pass 0 to all arguments
*/
- struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+ struct mpic *mpic = mpic_alloc(np, 0, 0, 0, 0,
" MPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index b3ebce1..c169998 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -12,7 +12,6 @@
bool "Freescale MPC5121E ADS"
depends on PPC_MPC512x
select DEFAULT_UIMAGE
- select MPC5121_ADS_CPLD
help
This option enables support for the MPC5121E ADS board.
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
index aa0d84d..464ea8e 100644
--- a/arch/powerpc/platforms/83xx/asp834x.c
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -36,38 +36,7 @@
mpc834x_usb_cfg();
}
-static void __init asp834x_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- of_node_put(np);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
-static struct __initdata of_device_id asp8347_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init asp8347_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, asp8347_ids, NULL);
- return 0;
-}
-machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+machine_device_initcall(asp834x, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -82,7 +51,7 @@
.name = "ASP8347E",
.probe = asp834x_probe,
.setup_arch = asp834x_setup_arch,
- .init_IRQ = asp834x_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index c55129f..65eb792 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -51,15 +51,14 @@
*/
static void __init mpc83xx_km_setup_arch(void)
{
+#ifdef CONFIG_QUICC_ENGINE
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("kmpbec83xx_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
@@ -122,54 +121,7 @@
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id kmpbec83xx_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init kmeter_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, kmpbec83xx_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc83xx_km, kmeter_declare_of_platform_devices);
-
-static void __init mpc83xx_km_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,pq2pro-pic");
- if (!np) {
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
- }
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif /* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
/* list of the supported boards */
static char *board[] __initdata = {
@@ -198,7 +150,7 @@
.name = "mpc83xx-km-platform",
.probe = mpc83xx_km_probe,
.setup_arch = mpc83xx_km_setup_arch,
- .init_IRQ = mpc83xx_km_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index f01806c..125336f 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -11,10 +11,15 @@
#include <linux/stddef.h>
#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
#include <asm/io.h>
#include <asm/hw_irq.h>
+#include <asm/ipic.h>
+#include <asm/qe_ic.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
@@ -65,3 +70,75 @@
return 0;
}
+
+void __init mpc83xx_ipic_init_IRQ(void)
+{
+ struct device_node *np;
+
+ /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */
+ np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+ if (!np)
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ of_node_put(np);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc83xx_qe_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+ }
+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+ of_node_put(np);
+}
+
+void __init mpc83xx_ipic_and_qe_init_IRQ(void)
+{
+ mpc83xx_ipic_init_IRQ();
+ mpc83xx_qe_init_IRQ();
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus" },
+ { .compatible = "gianfar" },
+ { .compatible = "gpio-leds", },
+ { .type = "qe", },
+ { .compatible = "fsl,qe", },
+ {},
+};
+
+int __init mpc83xx_declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+void __init mpc83xx_setup_pci(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+ mpc83xx_add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
+}
+#endif
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
index d0c4e15..4f2d9fe 100644
--- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -27,36 +27,13 @@
*/
static void __init mpc830x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc831x_usb_cfg();
}
-static void __init mpc830x_rdb_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
static const char *board[] __initdata = {
"MPC8308RDB",
"fsl,mpc8308rdb",
@@ -72,24 +49,13 @@
return of_flat_dt_match(of_get_flat_dt_root(), board);
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus" },
- { .compatible = "gianfar" },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc830x_rdb, mpc83xx_declare_of_platform_devices);
define_machine(mpc830x_rdb) {
.name = "MPC830x RDB",
.probe = mpc830x_rdb_probe,
.setup_arch = mpc830x_rdb_setup_arch,
- .init_IRQ = mpc830x_rdb_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index f859ead..fa25977 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -28,38 +28,13 @@
*/
static void __init mpc831x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc831x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc831x_usb_cfg();
}
-static void __init mpc831x_rdb_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
static const char *board[] __initdata = {
"MPC8313ERDB",
"fsl,mpc8315erdb",
@@ -74,25 +49,13 @@
return of_flat_dt_match(of_get_flat_dt_root(), board);
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus" },
- { .compatible = "gianfar" },
- { .compatible = "gpio-leds", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc831x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc831x_rdb, mpc83xx_declare_of_platform_devices);
define_machine(mpc831x_rdb) {
.name = "MPC831x RDB",
.probe = mpc831x_rdb_probe,
.setup_arch = mpc831x_rdb_setup_arch,
- .init_IRQ = mpc831x_rdb_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 32a5289..e36bc61 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -72,10 +72,7 @@
of_node_put(np);
}
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
@@ -101,51 +98,7 @@
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc832x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);
-
-static void __init mpc832x_sys_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif /* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -161,7 +114,7 @@
.name = "MPC832x MDS",
.probe = mpc832x_sys_probe,
.setup_arch = mpc832x_sys_setup_arch,
- .init_IRQ = mpc832x_sys_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 17f9974..eff5baa 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -193,17 +193,14 @@
*/
static void __init mpc832x_rdb_setup_arch(void)
{
-#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
+#if defined(CONFIG_QUICC_ENGINE)
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
@@ -218,52 +215,7 @@
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc832x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
-
-static void __init mpc832x_rdb_init_IRQ(void)
-{
-
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif /* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -279,7 +231,7 @@
.name = "MPC832x RDB",
.probe = mpc832x_rdb_probe,
.setup_arch = mpc832x_rdb_setup_arch,
- .init_IRQ = mpc832x_rdb_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 6b45969..39849dd 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,13 +41,12 @@
static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
{},
};
static int __init mpc834x_itx_declare_of_platform_devices(void)
{
+ mpc83xx_declare_of_platform_devices();
return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
}
machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
@@ -59,37 +58,14 @@
*/
static void __init mpc834x_itx_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc834x_itx_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc834x_usb_cfg();
}
-static void __init mpc834x_itx_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
@@ -104,7 +80,7 @@
.name = "MPC834x ITX",
.probe = mpc834x_itx_probe,
.setup_arch = mpc834x_itx_setup_arch,
- .init_IRQ = mpc834x_itx_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 041c517..5828d8e 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -77,51 +77,15 @@
*/
static void __init mpc834x_mds_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc834x_mds_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc834xemds_usb_cfg();
}
-static void __init mpc834x_mds_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
-static struct of_device_id mpc834x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc834x_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, mpc834x_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
+machine_device_initcall(mpc834x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -137,7 +101,7 @@
.name = "MPC834x MDS",
.probe = mpc834x_mds_probe,
.setup_arch = mpc834x_mds_setup_arch,
- .init_IRQ = mpc834x_mds_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 934cc8c..ad8e4bc 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -80,10 +80,7 @@
of_node_put(np);
}
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
@@ -144,23 +141,7 @@
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc836x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc836x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc836x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
+machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
#ifdef CONFIG_QE_USB
static int __init mpc836x_usb_cfg(void)
@@ -226,34 +207,6 @@
machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
#endif /* CONFIG_QE_USB */
-static void __init mpc836x_mds_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif /* CONFIG_QUICC_ENGINE */
-}
-
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
@@ -268,7 +221,7 @@
.name = "MPC836x MDS",
.probe = mpc836x_mds_probe,
.setup_arch = mpc836x_mds_setup_arch,
- .init_IRQ = mpc836x_mds_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index b0090aa..f8769d7 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -27,61 +27,19 @@
#include "mpc83xx.h"
-static struct of_device_id __initdata mpc836x_rdk_ids[] = {
- { .compatible = "simple-bus", },
- {},
-};
-
-static int __init mpc836x_rdk_declare_of_platform_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
-}
-machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
+machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices);
static void __init mpc836x_rdk_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
#endif
}
-static void __init mpc836x_rdk_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /*
- * Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np)
- return;
-
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif
-}
-
/*
* Called very early, MMU is off, device-tree isn't unflattened.
*/
@@ -96,7 +54,7 @@
.name = "MPC836x RDK",
.probe = mpc836x_rdk_probe,
.setup_arch = mpc836x_rdk_setup_arch,
- .init_IRQ = mpc836x_rdk_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 8306832..e53a60b 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -79,54 +79,14 @@
*/
static void __init mpc837x_mds_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc837x_mds_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc837xmds_usb_cfg();
}
-static struct of_device_id mpc837x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
- /* Publish platform_device */
- of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
-
-static void __init mpc837x_mds_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
+machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -142,7 +102,7 @@
.name = "MPC837x MDS",
.probe = mpc837x_mds_probe,
.setup_arch = mpc837x_mds_setup_arch,
- .init_IRQ = mpc837x_mds_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 7bafbf2..16c9c9c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -50,56 +50,15 @@
*/
static void __init mpc837x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc837x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc837x_usb_cfg();
mpc837x_rdb_sd_cfg();
}
-static struct of_device_id mpc837x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "gpio-leds", },
- {},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
- /* Publish platform_device */
- of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc837x_rdb, mpc837x_declare_of_platform_devices);
-
-static void __init mpc837x_rdb_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
+machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices);
static const char *board[] __initdata = {
"fsl,mpc8377rdb",
@@ -121,7 +80,7 @@
.name = "MPC837x RDB/WLAN",
.probe = mpc837x_rdb_probe,
.setup_arch = mpc837x_rdb_setup_arch,
- .init_IRQ = mpc837x_rdb_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 82a4345..0cf74d7 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -70,5 +70,21 @@
extern int mpc837x_usb_cfg(void);
extern int mpc834x_usb_cfg(void);
extern int mpc831x_usb_cfg(void);
+extern void mpc83xx_ipic_init_IRQ(void);
+#ifdef CONFIG_QUICC_ENGINE
+extern void mpc83xx_qe_init_IRQ(void);
+extern void mpc83xx_ipic_and_qe_init_IRQ(void);
+#else
+static inline void __init mpc83xx_qe_init_IRQ(void) {}
+#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
+#endif /* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_PCI
+extern void mpc83xx_setup_pci(void);
+#else
+#define mpc83xx_setup_pci() do {} while (0)
+#endif
+
+extern int mpc83xx_declare_of_platform_devices(void);
#endif /* __MPC83XX_H__ */
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index af41d8c..8a81d76 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -48,52 +48,13 @@
*/
static void __init sbc834x_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("sbc834x_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
-
+ mpc83xx_setup_pci();
}
-static void __init sbc834x_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-
- of_node_put(np);
-}
-
-static struct __initdata of_device_id sbc834x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init sbc834x_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, sbc834x_ids, NULL);
- return 0;
-}
-machine_device_initcall(sbc834x, sbc834x_declare_of_platform_devices);
+machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -102,14 +63,14 @@
{
unsigned long root = of_get_flat_dt_root();
- return of_flat_dt_is_compatible(root, "SBC834x");
+ return of_flat_dt_is_compatible(root, "SBC834xE");
}
define_machine(sbc834x) {
- .name = "SBC834x",
+ .name = "SBC834xE",
.probe = sbc834x_probe,
.setup_arch = sbc834x_setup_arch,
- .init_IRQ = sbc834x_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index bc5acb9..9cb2d43 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,6 +3,8 @@
#
obj-$(CONFIG_SMP) += smp.o
+obj-y += common.o
+
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
new file mode 100644
index 0000000..9fef530
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -0,0 +1,66 @@
+/*
+ * Routines common to most mpc85xx-based boards.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/of_platform.h>
+
+#include <sysdev/cpm2_pic.h>
+
+#include "mpc85xx.h"
+
+static struct of_device_id __initdata mpc85xx_common_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ { .compatible = "gianfar", },
+ { .compatible = "fsl,qe", },
+ { .compatible = "fsl,cpm2", },
+ { .compatible = "fsl,srio", },
+ {},
+};
+
+int __init mpc85xx_common_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, mpc85xx_common_ids, NULL);
+}
+#ifdef CONFIG_CPM2
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ int cascade_irq;
+
+ while ((cascade_irq = cpm2_get_irq()) >= 0)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+
+void __init mpc85xx_cpm2_pic_init(void)
+{
+ struct device_node *np;
+ int irq;
+
+ /* Setup CPM2 PIC */
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+ if (np == NULL) {
+ printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+ return;
+ }
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq == NO_IRQ) {
+ of_node_put(np);
+ printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
+ return;
+ }
+
+ cpm2_pic_init(np);
+ of_node_put(np);
+ irq_set_chained_handler(irq, cpm2_cascade);
+}
+#endif
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 802ad11..07e3e6c 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -31,32 +31,18 @@
#include <linux/of_platform.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "smp.h"
void __init corenet_ds_pic_init(void)
{
struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
- unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN |
+ unsigned int flags = MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU;
- np = of_find_node_by_type(np, "open-pic");
-
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
if (ppc_md.get_irq == mpic_get_coreint_irq)
flags |= MPIC_ENABLE_COREINT;
- mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC ");
+ mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
@@ -65,10 +51,6 @@
/*
* Setup the architecture
*/
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
void __init corenet_ds_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -77,9 +59,7 @@
#endif
dma_addr_t max = 0xffffffff;
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
@@ -112,7 +92,7 @@
.compatible = "simple-bus"
},
{
- .compatible = "fsl,rapidio-delta",
+ .compatible = "fsl,srio",
},
{
.compatible = "fsl,p4080-pcie",
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index c46f935..20f75d7 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -35,6 +35,7 @@
#include <asm/cpm2.h>
#include <sysdev/cpm2_pic.h>
+#include "mpc85xx.h"
#define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */
#define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */
@@ -54,60 +55,15 @@
for (;;);
}
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
static void __init ksi8560_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(NULL, "open-pic");
-
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
#ifdef CONFIG_CPM2
@@ -215,22 +171,7 @@
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .type = "soc", },
- { .type = "simple-bus", },
- { .name = "cpm", },
- { .name = "localbus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(ksi8560, declare_of_platform_devices);
+machine_device_initcall(ksi8560, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index f79f2f1..cf26682 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -32,31 +32,15 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
void __init mpc8536_ds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
}
@@ -104,19 +88,7 @@
printk("MPC8536 DS board from Freescale Semiconductor\n");
}
-static struct of_device_id __initdata mpc8536_ds_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc8536_ds_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc8536_ds_ids, NULL);
-}
-machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices);
+machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
new file mode 100644
index 0000000..2aa7c5d
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -0,0 +1,11 @@
+#ifndef MPC85xx_H
+#define MPC85xx_H
+extern int mpc85xx_common_publish_devices(void);
+
+#ifdef CONFIG_CPM2
+extern void mpc85xx_cpm2_pic_init(void);
+#else
+static inline void __init mpc85xx_cpm2_pic_init(void) {}
+#endif /* CONFIG_CPM2 */
+
+#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 3b2c9bb..3bebb51 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -35,6 +35,8 @@
#include <sysdev/cpm2_pic.h>
#endif
+#include "mpc85xx.h"
+
#ifdef CONFIG_PCI
static int mpc85xx_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
@@ -46,63 +48,15 @@
}
#endif /* CONFIG_PCI */
-#ifdef CONFIG_CPM2
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* CONFIG_CPM2 */
-
static void __init mpc85xx_ads_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(np, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
/*
@@ -221,23 +175,7 @@
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .name = "soc", },
- { .type = "soc", },
- { .name = "cpm", },
- { .name = "localbus", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
+machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 66cb8d6..40f03da 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -46,6 +46,8 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
/* CADMUS info */
/* xxx - galak, move into device tree */
#define CADMUS_BASE (0xf8004000)
@@ -177,7 +179,7 @@
static struct irqaction mpc85xxcds_8259_irqaction = {
.handler = mpc85xx_8259_cascade_action,
- .flags = IRQF_SHARED,
+ .flags = IRQF_SHARED | IRQF_NO_THREAD,
.name = "8259 cascade",
};
#endif /* PPC_I8259 */
@@ -186,30 +188,10 @@
static void __init mpc85xx_cds_pic_init(void)
{
struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-
- np = of_find_node_by_type(np, "open-pic");
-
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
-
- /* Return the mpic node */
- of_node_put(np);
-
mpic_init(mpic);
}
@@ -330,19 +312,7 @@
return of_flat_dt_is_compatible(root, "MPC85xxCDS");
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- return of_platform_bus_probe(NULL, of_bus_ids, NULL);
-}
-machine_device_initcall(mpc85xx_cds, declare_of_platform_devices);
+machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
define_machine(mpc85xx_cds) {
.name = "MPC85xx CDS",
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 1b9a8cf..eefbb91 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -35,6 +35,9 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#undef DEBUG
@@ -60,43 +63,27 @@
void __init mpc85xx_ds_pic_init(void)
{
struct mpic *mpic;
- struct resource r;
- struct device_node *np;
#ifdef CONFIG_PPC_I8259
+ struct device_node *np;
struct device_node *cascade_node = NULL;
int cascade_irq;
#endif
unsigned long root = of_get_flat_dt_root();
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY |
+ mpic = mpic_alloc(NULL, 0,
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
} else {
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
}
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
#ifdef CONFIG_PPC_I8259
@@ -152,9 +139,6 @@
/*
* Setup the architecture
*/
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
static void __init mpc85xx_ds_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -187,9 +171,7 @@
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
#ifdef CONFIG_SWIOTLB
if (memblock_end_of_DRAM() > max) {
@@ -219,21 +201,9 @@
return 0;
}
-static struct of_device_id __initdata mpc85xxds_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc85xxds_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
-}
-machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
-machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
-machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
+machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
+machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
+machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices);
machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a23a3ff..1d15a0c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -51,6 +51,9 @@
#include <asm/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#undef DEBUG
#ifdef DEBUG
@@ -153,30 +156,7 @@
* Setup the architecture
*
*/
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
-
#ifdef CONFIG_QUICC_ENGINE
-static struct of_device_id mpc85xx_qe_ids[] __initdata = {
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- { },
-};
-
-static void __init mpc85xx_publish_qe_devices(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!of_device_is_available(np)) {
- of_node_put(np);
- return;
- }
-
- of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
-}
-
static void __init mpc85xx_mds_reset_ucc_phys(void)
{
struct device_node *np;
@@ -347,7 +327,6 @@
of_node_put(np);
}
#else
-static void __init mpc85xx_publish_qe_devices(void) { }
static void __init mpc85xx_mds_qe_init(void) { }
static void __init mpc85xx_mds_qeic_init(void) { }
#endif /* CONFIG_QUICC_ENGINE */
@@ -381,9 +360,7 @@
}
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
mpc85xx_mds_qe_init();
@@ -429,24 +406,11 @@
machine_arch_initcall(mpc8569_mds, board_fixups);
static struct of_device_id mpc85xx_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "fsl,rapidio-delta", },
{ .compatible = "fsl,mpc8548-guts", },
{ .compatible = "gpio-leds", },
{},
};
-static struct of_device_id p1021_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
static int __init mpc85xx_publish_devices(void)
{
if (machine_is(mpc8568_mds))
@@ -454,23 +418,15 @@
if (machine_is(mpc8569_mds))
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
+ mpc85xx_common_publish_devices();
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
- mpc85xx_publish_qe_devices();
-
- return 0;
-}
-
-static int __init p1021_publish_devices(void)
-{
- of_platform_bus_probe(NULL, p1021_ids, NULL);
- mpc85xx_publish_qe_devices();
return 0;
}
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
-machine_device_initcall(p1021_mds, p1021_publish_devices);
+machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
@@ -478,26 +434,11 @@
static void __init mpc85xx_mds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np)
- return;
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
mpic_init(mpic);
mpc85xx_mds_qeic_init();
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index f5ff911..ccf520e 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -29,6 +29,9 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#undef DEBUG
@@ -42,49 +45,28 @@
void __init mpc85xx_rdb_pic_init(void)
{
struct mpic *mpic;
- struct resource r;
- struct device_node *np;
unsigned long root = of_get_flat_dt_root();
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY |
+ mpic = mpic_alloc(NULL, 0,
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
} else {
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
}
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-
}
/*
* Setup the architecture
*/
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
static void __init mpc85xx_rdb_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -102,27 +84,12 @@
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
-
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
}
-static struct of_device_id __initdata mpc85xxrdb_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc85xxrdb_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
-}
-machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
-machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
+machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index d7387fa..538bc3f 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -28,33 +28,18 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
void __init p1010_rdb_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET |
- MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
mpic_init(mpic);
-
}
@@ -81,18 +66,7 @@
printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
}
-static struct of_device_id __initdata p1010rdb_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- {},
-};
-
-static int __init p1010rdb_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, p1010rdb_ids, NULL);
-}
-machine_device_initcall(p1010_rdb, p1010rdb_publish_devices);
+machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
/*
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index fda1571..bb3d84f 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -26,6 +26,9 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <asm/fsl_guts.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
@@ -238,38 +241,15 @@
void __init p1022_ds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- pr_err("Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- pr_err("Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
-
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
}
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
/*
* Setup the architecture
*/
@@ -309,9 +289,7 @@
diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
#ifdef CONFIG_SWIOTLB
if (memblock_end_of_DRAM() > max) {
@@ -325,10 +303,6 @@
}
static struct of_device_id __initdata p1022_ds_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
/* So that the DMA channel nodes can be probed individually: */
{ .compatible = "fsl,eloplus-dma", },
{},
@@ -336,6 +310,7 @@
static int __init p1022_ds_publish_devices(void)
{
+ mpc85xx_common_publish_devices();
return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
}
machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c
index 835e0b3..d951e70 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rds.c
@@ -30,19 +30,18 @@
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include "smp.h"
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
/* ************************************************************************
*
* Setup the architecture
*
*/
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
static void __init mpc85xx_rds_setup_arch(void)
{
struct device_node *np;
@@ -87,53 +86,19 @@
fsl_add_bridge(np, 0);
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
}
-static struct of_device_id p1023_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- {},
-};
-
-
-static int __init p1023_publish_devices(void)
-{
- of_platform_bus_probe(NULL, p1023_ids, NULL);
-
- return 0;
-}
-
-machine_device_initcall(p1023_rds, p1023_publish_devices);
+machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices);
static void __init mpc85xx_rds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
mpic_init(mpic);
}
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 14632a9..184a507 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -48,35 +48,16 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
static int sbc_rev;
static void __init sbc8548_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-
- np = of_find_node_by_type(np, "open-pic");
-
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
-
- /* Return the mpic node */
- of_node_put(np);
-
mpic_init(mpic);
}
@@ -149,21 +130,7 @@
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .name = "soc", },
- { .type = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(sbc8548, declare_of_platform_devices);
+machine_device_initcall(sbc8548, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index cebd786..940752e 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -32,68 +32,22 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
#ifdef CONFIG_CPM2
#include <asm/cpm2.h>
#include <sysdev/cpm2_pic.h>
#endif
-#ifdef CONFIG_CPM2
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* CONFIG_CPM2 */
-
static void __init sbc8560_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(np, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
/*
@@ -208,23 +162,7 @@
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .name = "soc", },
- { .type = "soc", },
- { .name = "cpm", },
- { .name = "localbus", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(sbc8560, declare_of_platform_devices);
+machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 2df4785..ff42490 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -27,6 +27,7 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/mpic.h>
+#include "smp.h"
extern void __early_start(void);
diff --git a/arch/powerpc/platforms/85xx/smp.h b/arch/powerpc/platforms/85xx/smp.h
new file mode 100644
index 0000000..e2b4493
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/smp.h
@@ -0,0 +1,15 @@
+#ifndef POWERPC_85XX_SMP_H_
+#define POWERPC_85XX_SMP_H_ 1
+
+#include <linux/init.h>
+
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#else
+static inline void mpc85xx_smp_init(void)
+{
+ /* Nothing to do */
+}
+#endif
+
+#endif /* not POWERPC_85XX_SMP_H_ */
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index 747d8fb..18f6359 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -41,32 +41,17 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
#include "socrates_fpga_pic.h"
static void __init socrates_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
struct device_node *np;
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic");
@@ -96,17 +81,7 @@
#endif
}
-static struct of_device_id __initdata socrates_of_bus_ids[] = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init socrates_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
-}
-machine_device_initcall(socrates, socrates_publish_devices);
+machine_device_initcall(socrates, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index 5387e9f..e9e5234 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -40,70 +40,21 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
#ifdef CONFIG_CPM2
#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
#endif /* CONFIG_CPM2 */
static void __init stx_gp3_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- if (irq == NO_IRQ) {
- of_node_put(np);
- printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
- return;
- }
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
/*
@@ -144,19 +95,7 @@
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(stx_gp3, declare_of_platform_devices);
+machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 325de77..bf7c89f 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -38,70 +38,21 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
#ifdef CONFIG_CPM2
#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
#endif /* CONFIG_CPM2 */
static void __init tqm85xx_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- if (irq == NO_IRQ) {
- of_node_put(np);
- printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
- return;
- }
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
/*
@@ -173,19 +124,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
tqm85xx_ti1520_fixup);
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(tqm85xx, declare_of_platform_devices);
+machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices);
static const char *board[] __initdata = {
"tqc,tqm8540",
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index a9dc5e7..3a69f8b 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,6 +32,9 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
/* A few bit definitions needed for fixups on some boards */
#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
@@ -40,29 +43,11 @@
void __init xes_mpc85xx_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
}
@@ -136,9 +121,6 @@
/*
* Setup the architecture
*/
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
static void __init xes_mpc85xx_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -172,26 +154,12 @@
}
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
}
-static struct of_device_id __initdata xes_mpc85xx_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init xes_mpc85xx_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL);
-}
-machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices);
-machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices);
-machine_device_initcall(xes_mpc8540, xes_mpc85xx_publish_devices);
+machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index b11c353..569262c 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -161,7 +161,7 @@
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
- { .compatible = "fsl,rapidio-delta", },
+ { .compatible = "fsl,srio", },
{ .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
index 8ef8960..52bbfa0 100644
--- a/arch/powerpc/platforms/86xx/pic.c
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -31,26 +31,16 @@
void __init mpc86xx_init_irq(void)
{
- struct mpic *mpic;
- struct device_node *np;
- struct resource res;
#ifdef CONFIG_PPC_I8259
+ struct device_node *np;
struct device_node *cascade_node = NULL;
int cascade_irq;
#endif
- /* Determine PIC address. */
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL)
- return;
- of_address_to_resource(np, 0, &res);
-
- mpic = mpic_alloc(np, res.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
- MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
- MPIC_SINGLE_DEST_CPU,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " MPIC ");
- of_node_put(np);
BUG_ON(mpic == NULL);
mpic_init(mpic);
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 3fe6d92..31e1ade 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -211,6 +211,12 @@
endmenu
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
config PPC601_SYNC_FIX
bool "Workarounds for PPC601 bugs"
depends on 6xx && (PPC_PREP || PPC_PMAC)
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index fbecae0..425db18 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -174,7 +174,6 @@
config FSL_BOOKE
bool
depends on (E200 || E500) && PPC32
- select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT
default y
# this is for common code between PPC32 & PPC64 FSL BOOKE
@@ -182,6 +181,7 @@
bool
select FSL_EMB_PERFMON
select PPC_SMP_MUXED_IPI
+ select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64
default y if FSL_BOOKE
config PTE_64BIT
@@ -236,7 +236,7 @@
config PPC_ICSWX
bool "Support for PowerPC icswx coprocessor instruction"
- depends on POWER4
+ depends on POWER4 || PPC_A2
default n
---help---
@@ -252,6 +252,25 @@
If in doubt, say N here.
+config PPC_ICSWX_PID
+ bool "icswx requires direct PID management"
+ depends on PPC_ICSWX && POWER4
+ default y
+ ---help---
+ The PID register in server is used explicitly for ICSWX. In
+ embedded systems PID managment is done by the system.
+
+config PPC_ICSWX_USE_SIGILL
+ bool "Should a bad CT cause a SIGILL?"
+ depends on PPC_ICSWX
+ default n
+ ---help---
+ Should a bad CT used for "non-record form ICSWX" cause an
+ illegal intruction signal or should it be silent as
+ architected.
+
+ If in doubt, say N here.
+
config SPE
bool "SPE Support"
depends on E200 || (E500 && !PPC_E500MC)
@@ -290,7 +309,7 @@
config PPC_MM_SLICES
bool
- default y if (PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
+ default y if (!PPC_FSL_BOOK3E && PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
default n
config VIRT_CPU_ACCOUNTING
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 4d4c8c1..94560db 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -46,7 +46,7 @@
*/
#include <linux/module.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/cpu.h>
#include <asm/spu.h>
@@ -59,8 +59,8 @@
#define TEMP_MIN 65
#define TEMP_MAX 125
-#define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode) \
-struct sysdev_attribute attr_ ## _prefix ## _ ## _name = { \
+#define DEVICE_PREFIX_ATTR(_prefix,_name,_mode) \
+struct device_attribute attr_ ## _prefix ## _ ## _name = { \
.attr = { .name = __stringify(_name), .mode = _mode }, \
.show = _prefix ## _show_ ## _name, \
.store = _prefix ## _store_ ## _name, \
@@ -76,36 +76,36 @@
return ((temp - TEMP_MIN) >> 1) & 0x3f;
}
-static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
+static struct cbe_pmd_regs __iomem *get_pmd_regs(struct device *dev)
{
struct spu *spu;
- spu = container_of(sysdev, struct spu, sysdev);
+ spu = container_of(dev, struct spu, dev);
return cbe_get_pmd_regs(spu_devnode(spu));
}
/* returns the value for a given spu in a given register */
-static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg)
+static u8 spu_read_register_value(struct device *dev, union spe_reg __iomem *reg)
{
union spe_reg value;
struct spu *spu;
- spu = container_of(sysdev, struct spu, sysdev);
+ spu = container_of(dev, struct spu, dev);
value.val = in_be64(®->val);
return value.spe[spu->spe_id];
}
-static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr,
+static ssize_t spu_show_temp(struct device *dev, struct device_attribute *attr,
char *buf)
{
u8 value;
struct cbe_pmd_regs __iomem *pmd_regs;
- pmd_regs = get_pmd_regs(sysdev);
+ pmd_regs = get_pmd_regs(dev);
- value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1);
+ value = spu_read_register_value(dev, &pmd_regs->ts_ctsr1);
return sprintf(buf, "%d\n", reg_to_temp(value));
}
@@ -147,48 +147,48 @@
return size;
}
-static ssize_t spu_show_throttle_end(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t spu_show_throttle_end(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return show_throttle(get_pmd_regs(sysdev), buf, 0);
+ return show_throttle(get_pmd_regs(dev), buf, 0);
}
-static ssize_t spu_show_throttle_begin(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t spu_show_throttle_begin(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return show_throttle(get_pmd_regs(sysdev), buf, 8);
+ return show_throttle(get_pmd_regs(dev), buf, 8);
}
-static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t spu_show_throttle_full_stop(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return show_throttle(get_pmd_regs(sysdev), buf, 16);
+ return show_throttle(get_pmd_regs(dev), buf, 16);
}
-static ssize_t spu_store_throttle_end(struct sys_device *sysdev,
- struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t spu_store_throttle_end(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
{
- return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
+ return store_throttle(get_pmd_regs(dev), buf, size, 0);
}
-static ssize_t spu_store_throttle_begin(struct sys_device *sysdev,
- struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t spu_store_throttle_begin(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
{
- return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
+ return store_throttle(get_pmd_regs(dev), buf, size, 8);
}
-static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev,
- struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t spu_store_throttle_full_stop(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
{
- return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
+ return store_throttle(get_pmd_regs(dev), buf, size, 16);
}
-static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
+static ssize_t ppe_show_temp(struct device *dev, char *buf, int pos)
{
struct cbe_pmd_regs __iomem *pmd_regs;
u64 value;
- pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
+ pmd_regs = cbe_get_cpu_pmd_regs(dev->id);
value = in_be64(&pmd_regs->ts_ctsr2);
value = (value >> pos) & 0x3f;
@@ -199,64 +199,64 @@
/* shows the temperature of the DTS on the PPE,
* located near the linear thermal sensor */
-static ssize_t ppe_show_temp0(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_temp0(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return ppe_show_temp(sysdev, buf, 32);
+ return ppe_show_temp(dev, buf, 32);
}
/* shows the temperature of the second DTS on the PPE */
-static ssize_t ppe_show_temp1(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_temp1(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return ppe_show_temp(sysdev, buf, 0);
+ return ppe_show_temp(dev, buf, 0);
}
-static ssize_t ppe_show_throttle_end(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_throttle_end(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
+ return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 32);
}
-static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_throttle_begin(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
+ return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 40);
}
-static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_throttle_full_stop(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
+ return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 48);
}
-static ssize_t ppe_store_throttle_end(struct sys_device *sysdev,
- struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_end(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
{
- return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
+ return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 32);
}
-static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev,
- struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_begin(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
{
- return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
+ return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 40);
}
-static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev,
- struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_full_stop(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
{
- return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
+ return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 48);
}
-static struct sysdev_attribute attr_spu_temperature = {
+static struct device_attribute attr_spu_temperature = {
.attr = {.name = "temperature", .mode = 0400 },
.show = spu_show_temp,
};
-static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600);
-static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600);
-static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600);
+static DEVICE_PREFIX_ATTR(spu, throttle_end, 0600);
+static DEVICE_PREFIX_ATTR(spu, throttle_begin, 0600);
+static DEVICE_PREFIX_ATTR(spu, throttle_full_stop, 0600);
static struct attribute *spu_attributes[] = {
@@ -272,19 +272,19 @@
.attrs = spu_attributes,
};
-static struct sysdev_attribute attr_ppe_temperature0 = {
+static struct device_attribute attr_ppe_temperature0 = {
.attr = {.name = "temperature0", .mode = 0400 },
.show = ppe_show_temp0,
};
-static struct sysdev_attribute attr_ppe_temperature1 = {
+static struct device_attribute attr_ppe_temperature1 = {
.attr = {.name = "temperature1", .mode = 0400 },
.show = ppe_show_temp1,
};
-static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600);
-static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600);
-static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600);
+static DEVICE_PREFIX_ATTR(ppe, throttle_end, 0600);
+static DEVICE_PREFIX_ATTR(ppe, throttle_begin, 0600);
+static DEVICE_PREFIX_ATTR(ppe, throttle_full_stop, 0600);
static struct attribute *ppe_attributes[] = {
&attr_ppe_temperature0.attr,
@@ -307,7 +307,7 @@
{
int cpu;
struct cbe_pmd_regs __iomem *pmd_regs;
- struct sys_device *sysdev;
+ struct device *dev;
union ppe_spe_reg tpr;
union spe_reg str1;
u64 str2;
@@ -349,14 +349,14 @@
for_each_possible_cpu (cpu) {
pr_debug("processing cpu %d\n", cpu);
- sysdev = get_cpu_sysdev(cpu);
+ dev = get_cpu_device(cpu);
- if (!sysdev) {
- pr_info("invalid sysdev pointer for cbe_thermal\n");
+ if (!dev) {
+ pr_info("invalid dev pointer for cbe_thermal\n");
return -EINVAL;
}
- pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
+ pmd_regs = cbe_get_cpu_pmd_regs(dev->id);
if (!pmd_regs) {
pr_info("invalid CBE regs pointer for cbe_thermal\n");
@@ -379,8 +379,8 @@
int rc = init_default_values();
if (rc == 0) {
- spu_add_sysdev_attr_group(&spu_attribute_group);
- cpu_add_sysdev_attr_group(&ppe_attribute_group);
+ spu_add_dev_attr_group(&spu_attribute_group);
+ cpu_add_dev_attr_group(&ppe_attribute_group);
}
return rc;
@@ -389,8 +389,8 @@
static void __exit thermal_exit(void)
{
- spu_remove_sysdev_attr_group(&spu_attribute_group);
- cpu_remove_sysdev_attr_group(&ppe_attribute_group);
+ spu_remove_dev_attr_group(&spu_attribute_group);
+ cpu_remove_dev_attr_group(&ppe_attribute_group);
}
module_exit(thermal_exit);
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 592c3d5..ae9fc7b 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1037,6 +1037,8 @@
/* The fixed mapping is only supported on axon machines */
np = of_find_node_by_name(NULL, "axon");
+ of_node_put(np);
+
if (!np) {
pr_debug("iommu: fixed mapping disabled, no axons found\n");
return -1;
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 0fc9b72..62002a7 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -184,24 +184,10 @@
}
machine_subsys_initcall(cell, cell_publish_devices);
-static void cell_mpic_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct mpic *mpic = irq_desc_get_handler_data(desc);
- unsigned int virq;
-
- virq = mpic_get_one_irq(mpic);
- if (virq != NO_IRQ)
- generic_handle_irq(virq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
static void __init mpic_init_IRQ(void)
{
struct device_node *dn;
struct mpic *mpic;
- unsigned int virq;
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
@@ -211,19 +197,10 @@
/* The MPIC driver will get everything it needs from the
* device-tree, just pass 0 to all arguments
*/
- mpic = mpic_alloc(dn, 0, 0, 0, 0, " MPIC ");
+ mpic = mpic_alloc(dn, 0, MPIC_SECONDARY, 0, 0, " MPIC ");
if (mpic == NULL)
continue;
mpic_init(mpic);
-
- virq = irq_of_parse_and_map(dn, 0);
- if (virq == NO_IRQ)
- continue;
-
- printk(KERN_INFO "%s : hooking up to IRQ %d\n",
- dn->full_name, virq);
- irq_set_handler_data(virq, mpic);
- irq_set_chained_handler(virq, cell_mpic_cascade);
}
}
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index f5c5c76..4a255cf 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -23,7 +23,7 @@
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/cpu.h>
#include <asm/ptrace.h>
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index e94d3ec..8b12139 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -519,31 +519,32 @@
}
EXPORT_SYMBOL_GPL(spu_init_channels);
-static struct sysdev_class spu_sysdev_class = {
+static struct bus_type spu_subsys = {
.name = "spu",
+ .dev_name = "spu",
};
-int spu_add_sysdev_attr(struct sysdev_attribute *attr)
+int spu_add_dev_attr(struct device_attribute *attr)
{
struct spu *spu;
mutex_lock(&spu_full_list_mutex);
list_for_each_entry(spu, &spu_full_list, full_list)
- sysdev_create_file(&spu->sysdev, attr);
+ device_create_file(&spu->dev, attr);
mutex_unlock(&spu_full_list_mutex);
return 0;
}
-EXPORT_SYMBOL_GPL(spu_add_sysdev_attr);
+EXPORT_SYMBOL_GPL(spu_add_dev_attr);
-int spu_add_sysdev_attr_group(struct attribute_group *attrs)
+int spu_add_dev_attr_group(struct attribute_group *attrs)
{
struct spu *spu;
int rc = 0;
mutex_lock(&spu_full_list_mutex);
list_for_each_entry(spu, &spu_full_list, full_list) {
- rc = sysfs_create_group(&spu->sysdev.kobj, attrs);
+ rc = sysfs_create_group(&spu->dev.kobj, attrs);
/* we're in trouble here, but try unwinding anyway */
if (rc) {
@@ -552,7 +553,7 @@
list_for_each_entry_continue_reverse(spu,
&spu_full_list, full_list)
- sysfs_remove_group(&spu->sysdev.kobj, attrs);
+ sysfs_remove_group(&spu->dev.kobj, attrs);
break;
}
}
@@ -561,45 +562,45 @@
return rc;
}
-EXPORT_SYMBOL_GPL(spu_add_sysdev_attr_group);
+EXPORT_SYMBOL_GPL(spu_add_dev_attr_group);
-void spu_remove_sysdev_attr(struct sysdev_attribute *attr)
+void spu_remove_dev_attr(struct device_attribute *attr)
{
struct spu *spu;
mutex_lock(&spu_full_list_mutex);
list_for_each_entry(spu, &spu_full_list, full_list)
- sysdev_remove_file(&spu->sysdev, attr);
+ device_remove_file(&spu->dev, attr);
mutex_unlock(&spu_full_list_mutex);
}
-EXPORT_SYMBOL_GPL(spu_remove_sysdev_attr);
+EXPORT_SYMBOL_GPL(spu_remove_dev_attr);
-void spu_remove_sysdev_attr_group(struct attribute_group *attrs)
+void spu_remove_dev_attr_group(struct attribute_group *attrs)
{
struct spu *spu;
mutex_lock(&spu_full_list_mutex);
list_for_each_entry(spu, &spu_full_list, full_list)
- sysfs_remove_group(&spu->sysdev.kobj, attrs);
+ sysfs_remove_group(&spu->dev.kobj, attrs);
mutex_unlock(&spu_full_list_mutex);
}
-EXPORT_SYMBOL_GPL(spu_remove_sysdev_attr_group);
+EXPORT_SYMBOL_GPL(spu_remove_dev_attr_group);
-static int spu_create_sysdev(struct spu *spu)
+static int spu_create_dev(struct spu *spu)
{
int ret;
- spu->sysdev.id = spu->number;
- spu->sysdev.cls = &spu_sysdev_class;
- ret = sysdev_register(&spu->sysdev);
+ spu->dev.id = spu->number;
+ spu->dev.bus = &spu_subsys;
+ ret = device_register(&spu->dev);
if (ret) {
printk(KERN_ERR "Can't register SPU %d with sysfs\n",
spu->number);
return ret;
}
- sysfs_add_device_to_node(&spu->sysdev, spu->node);
+ sysfs_add_device_to_node(&spu->dev, spu->node);
return 0;
}
@@ -635,7 +636,7 @@
if (ret)
goto out_destroy;
- ret = spu_create_sysdev(spu);
+ ret = spu_create_dev(spu);
if (ret)
goto out_free_irqs;
@@ -692,10 +693,10 @@
}
-static ssize_t spu_stat_show(struct sys_device *sysdev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t spu_stat_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- struct spu *spu = container_of(sysdev, struct spu, sysdev);
+ struct spu *spu = container_of(dev, struct spu, dev);
return sprintf(buf, "%s %llu %llu %llu %llu "
"%llu %llu %llu %llu %llu %llu %llu %llu\n",
@@ -714,7 +715,7 @@
spu->stats.libassist);
}
-static SYSDEV_ATTR(stat, 0644, spu_stat_show, NULL);
+static DEVICE_ATTR(stat, 0644, spu_stat_show, NULL);
#ifdef CONFIG_KEXEC
@@ -813,8 +814,8 @@
if (!spu_management_ops)
goto out;
- /* create sysdev class for spus */
- ret = sysdev_class_register(&spu_sysdev_class);
+ /* create system subsystem for spus */
+ ret = subsys_system_register(&spu_subsys, NULL);
if (ret)
goto out;
@@ -823,7 +824,7 @@
if (ret < 0) {
printk(KERN_WARNING "%s: Error initializing spus\n",
__func__);
- goto out_unregister_sysdev_class;
+ goto out_unregister_subsys;
}
if (ret > 0)
@@ -833,15 +834,15 @@
xmon_register_spus(&spu_full_list);
crash_register_spus(&spu_full_list);
mutex_unlock(&spu_full_list_mutex);
- spu_add_sysdev_attr(&attr_stat);
+ spu_add_dev_attr(&dev_attr_stat);
register_syscore_ops(&spu_syscore_ops);
spu_init_affinity();
return 0;
- out_unregister_sysdev_class:
- sysdev_class_unregister(&spu_sysdev_class);
+ out_unregister_subsys:
+ bus_unregister(&spu_subsys);
out:
return ret;
}
diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c
index 75530d9..714bbfc 100644
--- a/arch/powerpc/platforms/cell/spu_syscalls.c
+++ b/arch/powerpc/platforms/cell/spu_syscalls.c
@@ -65,8 +65,8 @@
#endif /* CONFIG_SPU_FS_MODULE */
-asmlinkage long sys_spu_create(const char __user *name,
- unsigned int flags, mode_t mode, int neighbor_fd)
+SYSCALL_DEFINE4(spu_create, const char __user *, name, unsigned int, flags,
+ umode_t, mode, int, neighbor_fd)
{
long ret;
struct file *neighbor;
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index e481f6b..d4a094c 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -74,7 +74,6 @@
static void spufs_i_callback(struct rcu_head *head)
{
struct inode *inode = container_of(head, struct inode, i_rcu);
- INIT_LIST_HEAD(&inode->i_dentry);
kmem_cache_free(spufs_inode_cache, SPUFS_I(inode));
}
@@ -92,7 +91,7 @@
}
static struct inode *
-spufs_new_inode(struct super_block *sb, int mode)
+spufs_new_inode(struct super_block *sb, umode_t mode)
{
struct inode *inode;
@@ -124,7 +123,7 @@
static int
spufs_new_file(struct super_block *sb, struct dentry *dentry,
- const struct file_operations *fops, int mode,
+ const struct file_operations *fops, umode_t mode,
size_t size, struct spu_context *ctx)
{
static const struct inode_operations spufs_file_iops = {
@@ -194,7 +193,7 @@
}
static int spufs_fill_dir(struct dentry *dir,
- const struct spufs_tree_descr *files, int mode,
+ const struct spufs_tree_descr *files, umode_t mode,
struct spu_context *ctx)
{
struct dentry *dentry, *tmp;
@@ -264,7 +263,7 @@
static int
spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
- int mode)
+ umode_t mode)
{
int ret;
struct inode *inode;
@@ -447,7 +446,7 @@
static int
spufs_create_context(struct inode *inode, struct dentry *dentry,
- struct vfsmount *mnt, int flags, int mode,
+ struct vfsmount *mnt, int flags, umode_t mode,
struct file *aff_filp)
{
int ret;
@@ -521,7 +520,7 @@
}
static int
-spufs_mkgang(struct inode *dir, struct dentry *dentry, int mode)
+spufs_mkgang(struct inode *dir, struct dentry *dentry, umode_t mode)
{
int ret;
struct inode *inode;
@@ -584,7 +583,7 @@
static int spufs_create_gang(struct inode *inode,
struct dentry *dentry,
- struct vfsmount *mnt, int mode)
+ struct vfsmount *mnt, umode_t mode)
{
int ret;
@@ -612,7 +611,7 @@
static struct file_system_type spufs_type;
long spufs_create(struct path *path, struct dentry *dentry,
- unsigned int flags, mode_t mode, struct file *filp)
+ unsigned int flags, umode_t mode, struct file *filp)
{
int ret;
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 099245f..67852ad 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -237,7 +237,7 @@
struct spufs_tree_descr {
const char *name;
const struct file_operations *ops;
- int mode;
+ umode_t mode;
size_t size;
};
@@ -249,7 +249,7 @@
extern struct spufs_calls spufs_calls;
long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *status);
long spufs_create(struct path *nd, struct dentry *dentry, unsigned int flags,
- mode_t mode, struct file *filp);
+ umode_t mode, struct file *filp);
/* ELF coredump callbacks for writing SPU ELF notes */
extern int spufs_coredump_extra_notes_size(void);
extern int spufs_coredump_extra_notes_write(struct file *file, loff_t *foffset);
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index 71a5b52..8591bb6 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -60,7 +60,7 @@
}
static long do_spu_create(const char __user *pathname, unsigned int flags,
- mode_t mode, struct file *neighbor)
+ umode_t mode, struct file *neighbor)
{
struct path path;
struct dentry *dentry;
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 1227864..f1f17bb 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -435,8 +435,7 @@
if (len > 1)
isu_size = iranges[3];
- chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY,
- isu_size, 0, " MPIC ");
+ chrp_mpic = mpic_alloc(np, opaddr, 0, isu_size, 0, " MPIC ");
if (chrp_mpic == NULL) {
printk(KERN_ERR "Failed to allocate MPIC structure\n");
goto bail;
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 2e9bcf6..9cfcf20 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -148,30 +148,14 @@
static void __init holly_init_IRQ(void)
{
struct mpic *mpic;
- phys_addr_t mpic_paddr = 0;
- struct device_node *tsi_pic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
struct device_node *tsi_pci;
struct device_node *cascade_node = NULL;
#endif
- tsi_pic = of_find_node_by_type(NULL, "open-pic");
- if (tsi_pic) {
- unsigned int size;
- const void *prop = of_get_property(tsi_pic, "reg", &size);
- mpic_paddr = of_translate_address(tsi_pic, prop);
- }
-
- if (mpic_paddr == 0) {
- printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__);
- return;
- }
-
- pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr);
-
- mpic = mpic_alloc(tsi_pic, mpic_paddr,
- MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24,
NR_IRQS-4, /* num_sources used */
@@ -179,7 +163,7 @@
BUG_ON(mpic == NULL);
- mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
mpic_init(mpic);
@@ -204,7 +188,6 @@
#endif
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
- of_node_put(tsi_pic);
}
void holly_show_cpuinfo(struct seq_file *m)
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 244f997..bcfad92 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -81,29 +81,19 @@
static void __init linkstation_init_IRQ(void)
{
struct mpic *mpic;
- struct device_node *dnp;
- const u32 *prop;
- int size;
- phys_addr_t paddr;
- dnp = of_find_node_by_type(NULL, "open-pic");
- if (dnp == NULL)
- return;
-
- prop = of_get_property(dnp, "reg", &size);
- paddr = (phys_addr_t)of_translate_address(dnp, prop);
-
- mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC ");
+ mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET,
+ 4, 32, " EPIC ");
BUG_ON(mpic == NULL);
/* PCI IRQs */
- mpic_assign_isu(mpic, 0, paddr + 0x10200);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
/* I2C */
- mpic_assign_isu(mpic, 1, paddr + 0x11000);
+ mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
/* ttyS0, ttyS1 */
- mpic_assign_isu(mpic, 2, paddr + 0x11100);
+ mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100);
mpic_init(mpic);
}
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index f8f33e1..f3350d7 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -102,31 +102,14 @@
static void __init mpc7448_hpc2_init_IRQ(void)
{
struct mpic *mpic;
- phys_addr_t mpic_paddr = 0;
- struct device_node *tsi_pic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
struct device_node *tsi_pci;
struct device_node *cascade_node = NULL;
#endif
- tsi_pic = of_find_node_by_type(NULL, "open-pic");
- if (tsi_pic) {
- unsigned int size;
- const void *prop = of_get_property(tsi_pic, "reg", &size);
- mpic_paddr = of_translate_address(tsi_pic, prop);
- }
-
- if (mpic_paddr == 0) {
- printk("%s: No tsi108 PIC found !\n", __func__);
- return;
- }
-
- DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
- (u32) mpic_paddr);
-
- mpic = mpic_alloc(tsi_pic, mpic_paddr,
- MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24,
NR_IRQS-4, /* num_sources used */
@@ -134,7 +117,7 @@
BUG_ON(mpic == NULL);
- mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
mpic_init(mpic);
@@ -159,7 +142,6 @@
#endif
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
- of_node_put(tsi_pic);
}
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index f1eebca..afa6388 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -83,35 +83,17 @@
static void __init storcenter_init_IRQ(void)
{
struct mpic *mpic;
- struct device_node *dnp;
- const void *prop;
- int size;
- phys_addr_t paddr;
- dnp = of_find_node_by_type(NULL, "open-pic");
- if (dnp == NULL)
- return;
-
- prop = of_get_property(dnp, "reg", &size);
- if (prop == NULL) {
- of_node_put(dnp);
- return;
- }
-
- paddr = (phys_addr_t)of_translate_address(dnp, prop);
- mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
+ mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET,
16, 32, " OpenPIC ");
-
- of_node_put(dnp);
-
BUG_ON(mpic == NULL);
/*
* 16 Serial Interrupts followed by 16 Internal Interrupts.
* I2C is the second internal, so it is at 17, 0x11020.
*/
- mpic_assign_isu(mpic, 0, paddr + 0x10200);
- mpic_assign_isu(mpic, 1, paddr + 0x11000);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
+ mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
mpic_init(mpic);
}
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
index 1b5dc1a..6d8dadf 100644
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -79,24 +79,19 @@
BUG_ON(memblock.memory.cnt != 2);
BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base));
- p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE);
- p[1].size = _ALIGN_DOWN(p[1].size, PAGE_SIZE);
+ /* trim unaligned tail */
+ memblock_remove(ALIGN(p[1].base + p[1].size, PAGE_SIZE),
+ (phys_addr_t)ULLONG_MAX);
- wii_hole_start = p[0].base + p[0].size;
+ /* determine hole, add & reserve them */
+ wii_hole_start = ALIGN(p[0].base + p[0].size, PAGE_SIZE);
wii_hole_size = p[1].base - wii_hole_start;
-
- pr_info("MEM1: <%08llx %08llx>\n", p[0].base, p[0].size);
- pr_info("HOLE: <%08lx %08lx>\n", wii_hole_start, wii_hole_size);
- pr_info("MEM2: <%08llx %08llx>\n", p[1].base, p[1].size);
-
- p[0].size += wii_hole_size + p[1].size;
-
- memblock.memory.cnt = 1;
- memblock_analyze();
-
- /* reserve the hole */
+ memblock_add(wii_hole_start, wii_hole_size);
memblock_reserve(wii_hole_start, wii_hole_size);
+ BUG_ON(memblock.memory.cnt != 1);
+ __memblock_dump_all();
+
/* allow ioremapping the address space in the hole */
__allow_ioremap_reserved = 1;
}
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index ea0acbd..8fc6258 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -563,7 +563,8 @@
static void iseries_shared_idle(void)
{
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched() && !hvlpevent_is_pending()) {
local_irq_disable();
ppc64_runlatch_off();
@@ -577,7 +578,8 @@
}
ppc64_runlatch_on();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
if (hvlpevent_is_pending())
process_iSeries_events();
@@ -593,7 +595,8 @@
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
if (!need_resched()) {
while (!need_resched()) {
ppc64_runlatch_off();
@@ -610,7 +613,8 @@
}
ppc64_runlatch_on();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c
index 7e2a551..02df49f 100644
--- a/arch/powerpc/platforms/iseries/smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -24,7 +24,7 @@
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/cpu.h>
#include <asm/ptrace.h>
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index dd2e48b..401e3f3 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -207,6 +207,54 @@
return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
}
+static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
+ int len, u32 *val)
+{
+ volatile void __iomem *addr;
+
+ addr = hose->cfg_addr;
+ addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_be16(addr);
+ break;
+ default:
+ *val = in_be32(addr);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
+ int len, u32 val)
+{
+ volatile void __iomem *addr;
+
+ addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+ if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
+ return PCIBIOS_SUCCESSFUL;
+
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_be16(addr, val);
+ break;
+ default:
+ out_be32(addr, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
@@ -217,6 +265,9 @@
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
+ if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+ return u3_ht_root_read_config(hose, offset, len, val);
+
if (offset > 0xff)
return PCIBIOS_BAD_REGISTER_NUMBER;
@@ -252,6 +303,9 @@
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
+ if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+ return u3_ht_root_write_config(hose, offset, len, val);
+
if (offset > 0xff)
return PCIBIOS_BAD_REGISTER_NUMBER;
@@ -428,6 +482,7 @@
* reg_property and using some accessor functions instead
*/
hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+ hose->cfg_addr = ioremap(0xf8070000, 0x1000);
hose->first_busno = 0;
hose->last_busno = 0xef;
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 4c37204..0bcbfe7 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -221,7 +221,7 @@
unsigned long openpic_addr = 0;
int naddr, n, i, opplen, has_isus = 0;
struct mpic *mpic;
- unsigned int flags = MPIC_PRIMARY;
+ unsigned int flags = 0;
/* Locate MPIC in the device-tree. Note that there is a bug
* in Maple device-tree where the type of the controller is
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 6f35582..98b7a7c 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -224,7 +224,7 @@
openpic_addr = of_read_number(opprop, naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
- mpic_flags = MPIC_PRIMARY | MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
+ mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
if (nmiprop)
@@ -234,7 +234,7 @@
mpic_flags, 0, 0, "PASEMI-OPIC");
BUG_ON(!mpic);
- mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
mpic_init(mpic);
/* The NMI/MCK source needs to be prio 15 */
if (nmiprop) {
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 04af5f4..1fc386a 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -23,7 +23,7 @@
#include <linux/pmu.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/hardirq.h>
#include <asm/prom.h>
#include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 901bfbd..7761aab 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -52,13 +52,8 @@
/* Default addresses */
static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4];
-#define GC_LEVEL_MASK 0x3ff00000
-#define OHARE_LEVEL_MASK 0x1ff00000
-#define HEATHROW_LEVEL_MASK 0x1ff00000
-
static int max_irqs;
static int max_real_irqs;
-static u32 level_mask[4];
static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
@@ -217,8 +212,7 @@
for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
int i = irq >> 5;
bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
- /* We must read level interrupts from the level register */
- bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits |= in_le32(&pmac_irq_hw[i]->level);
bits &= ppc_cached_irq_mask[i];
if (bits == 0)
continue;
@@ -248,8 +242,7 @@
for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
int i = irq >> 5;
bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
- /* We must read level interrupts from the level register */
- bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits |= in_le32(&pmac_irq_hw[i]->level);
bits &= ppc_cached_irq_mask[i];
if (bits == 0)
continue;
@@ -284,19 +277,14 @@
static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- int level;
-
if (hw >= max_irqs)
return -EINVAL;
/* Mark level interrupts, set delayed disable for edge ones and set
* handlers
*/
- level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f)));
- if (level)
- irq_set_status_flags(virq, IRQ_LEVEL);
- irq_set_chip_and_handler(virq, &pmac_pic,
- level ? handle_level_irq : handle_edge_irq);
+ irq_set_status_flags(virq, IRQ_LEVEL);
+ irq_set_chip_and_handler(virq, &pmac_pic, handle_level_irq);
return 0;
}
@@ -334,21 +322,14 @@
if ((master = of_find_node_by_name(NULL, "gc")) != NULL) {
max_irqs = max_real_irqs = 32;
- level_mask[0] = GC_LEVEL_MASK;
} else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) {
max_irqs = max_real_irqs = 32;
- level_mask[0] = OHARE_LEVEL_MASK;
-
/* We might have a second cascaded ohare */
slave = of_find_node_by_name(NULL, "pci106b,7");
- if (slave) {
+ if (slave)
max_irqs = 64;
- level_mask[1] = OHARE_LEVEL_MASK;
- }
} else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
max_irqs = max_real_irqs = 64;
- level_mask[0] = HEATHROW_LEVEL_MASK;
- level_mask[1] = 0;
/* We might have a second cascaded heathrow */
slave = of_find_node_by_name(master, "mac-io");
@@ -363,11 +344,8 @@
}
/* We found a slave */
- if (slave) {
+ if (slave)
max_irqs = 128;
- level_mask[2] = HEATHROW_LEVEL_MASK;
- level_mask[3] = 0;
- }
}
BUG_ON(master == NULL);
@@ -464,18 +442,6 @@
}
#endif /* CONFIG_PPC32 */
-static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct mpic *mpic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = mpic_get_one_irq(mpic);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
{
#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
@@ -498,14 +464,8 @@
int master)
{
const char *name = master ? " MPIC 1 " : " MPIC 2 ";
- struct resource r;
struct mpic *mpic;
- unsigned int flags = master ? MPIC_PRIMARY : 0;
- int rc;
-
- rc = of_address_to_resource(np, 0, &r);
- if (rc)
- return NULL;
+ unsigned int flags = master ? 0 : MPIC_SECONDARY;
pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
@@ -519,7 +479,7 @@
if (master && (flags & MPIC_BIG_ENDIAN))
flags |= MPIC_U3_HT_IRQS;
- mpic = mpic_alloc(np, r.start, flags, 0, 0, name);
+ mpic = mpic_alloc(np, 0, flags, 0, 0, name);
if (mpic == NULL)
return NULL;
@@ -532,7 +492,6 @@
{
struct mpic *mpic1, *mpic2;
struct device_node *np, *master = NULL, *slave = NULL;
- unsigned int cascade;
/* We can have up to 2 MPICs cascaded */
for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
@@ -568,27 +527,14 @@
of_node_put(master);
- /* No slave, let's go out */
- if (slave == NULL)
- return 0;
-
- /* Get/Map slave interrupt */
- cascade = irq_of_parse_and_map(slave, 0);
- if (cascade == NO_IRQ) {
- printk(KERN_ERR "Failed to map cascade IRQ\n");
- return 0;
- }
-
- mpic2 = pmac_setup_one_mpic(slave, 0);
- if (mpic2 == NULL) {
- printk(KERN_ERR "Failed to setup slave MPIC\n");
+ /* Set up a cascaded controller, if present */
+ if (slave) {
+ mpic2 = pmac_setup_one_mpic(slave, 0);
+ if (mpic2 == NULL)
+ printk(KERN_ERR "Failed to setup slave MPIC\n");
of_node_put(slave);
- return 0;
}
- irq_set_handler_data(cascade, mpic2);
- irq_set_chained_handler(cascade, pmac_u3_cascade);
- of_node_put(slave);
return 0;
}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 96580b1..970ea1d 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -494,11 +494,15 @@
return -1;
np = of_find_node_by_name(NULL, "valkyrie");
- if (np)
+ if (np) {
of_platform_device_create(np, "valkyrie", NULL);
+ of_node_put(np);
+ }
np = of_find_node_by_name(NULL, "platinum");
- if (np)
+ if (np) {
of_platform_device_create(np, "platinum", NULL);
+ of_node_put(np);
+ }
np = of_find_node_by_type(NULL, "smu");
if (np) {
of_platform_device_create(np, "smu", NULL);
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 9b6a820..44d7692 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -200,7 +200,7 @@
if (psurge_secondary_virq)
rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
- IRQF_PERCPU, "IPI", NULL);
+ IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL);
if (rc)
pr_err("Failed to setup secondary cpu IPI\n");
@@ -408,13 +408,13 @@
static struct irqaction psurge_irqaction = {
.handler = psurge_ipi_intr,
- .flags = IRQF_PERCPU,
+ .flags = IRQF_PERCPU | IRQF_NO_THREAD,
.name = "primary IPI",
};
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
- if (cpu_nr != 0)
+ if (cpu_nr != 0 || !psurge_start)
return;
/* reset the entry point so if we get another intr we won't
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 3185300..bcc3cb4 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,4 +2,4 @@
obj-y += opal-rtc.o opal-nvram.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o
+obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 4a3f46d..3bb07e5 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -99,3 +99,11 @@
OPAL_CALL(opal_pci_map_pe_dma_window, OPAL_PCI_MAP_PE_DMA_WINDOW);
OPAL_CALL(opal_pci_map_pe_dma_window_real, OPAL_PCI_MAP_PE_DMA_WINDOW_REAL);
OPAL_CALL(opal_pci_reset, OPAL_PCI_RESET);
+OPAL_CALL(opal_pci_get_hub_diag_data, OPAL_PCI_GET_HUB_DIAG_DATA);
+OPAL_CALL(opal_pci_get_phb_diag_data, OPAL_PCI_GET_PHB_DIAG_DATA);
+OPAL_CALL(opal_pci_fence_phb, OPAL_PCI_FENCE_PHB);
+OPAL_CALL(opal_pci_reinit, OPAL_PCI_REINIT);
+OPAL_CALL(opal_pci_mask_pe_error, OPAL_PCI_MASK_PE_ERROR);
+OPAL_CALL(opal_set_slot_led_status, OPAL_SET_SLOT_LED_STATUS);
+OPAL_CALL(opal_get_epow_status, OPAL_GET_EPOW_STATUS);
+OPAL_CALL(opal_set_system_attention_led, OPAL_SET_SYSTEM_ATTENTION_LED);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
new file mode 100644
index 0000000..f31162c
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -0,0 +1,1330 @@
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+struct resource_wrap {
+ struct list_head link;
+ resource_size_t size;
+ resource_size_t align;
+ struct pci_dev *dev; /* Set if it's a device */
+ struct pci_bus *bus; /* Set if it's a bridge */
+};
+
+static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe,
+ struct va_format *vaf)
+{
+ char pfix[32];
+
+ if (pe->pdev)
+ strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
+ else
+ sprintf(pfix, "%04x:%02x ",
+ pci_domain_nr(pe->pbus), pe->pbus->number);
+ return printk("pci %s%s: [PE# %.3d] %pV", level, pfix, pe->pe_number, vaf);
+}
+
+#define define_pe_printk_level(func, kern_level) \
+static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...) \
+{ \
+ struct va_format vaf; \
+ va_list args; \
+ int r; \
+ \
+ va_start(args, fmt); \
+ \
+ vaf.fmt = fmt; \
+ vaf.va = &args; \
+ \
+ r = __pe_printk(kern_level, pe, &vaf); \
+ va_end(args); \
+ \
+ return r; \
+} \
+
+define_pe_printk_level(pe_err, KERN_ERR);
+define_pe_printk_level(pe_warn, KERN_WARNING);
+define_pe_printk_level(pe_info, KERN_INFO);
+
+
+/* Calculate resource usage & alignment requirement of a single
+ * device. This will also assign all resources within the device
+ * for a given type starting at 0 for the biggest one and then
+ * assigning in decreasing order of size.
+ */
+static void __devinit pnv_ioda_calc_dev(struct pci_dev *dev, unsigned int flags,
+ resource_size_t *size,
+ resource_size_t *align)
+{
+ resource_size_t start;
+ struct resource *r;
+ int i;
+
+ pr_devel(" -> CDR %s\n", pci_name(dev));
+
+ *size = *align = 0;
+
+ /* Clear the resources out and mark them all unset */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ r = &dev->resource[i];
+ if (!(r->flags & flags))
+ continue;
+ if (r->start) {
+ r->end -= r->start;
+ r->start = 0;
+ }
+ r->flags |= IORESOURCE_UNSET;
+ }
+
+ /* We currently keep all memory resources together, we
+ * will handle prefetch & 64-bit separately in the future
+ * but for now we stick everybody in M32
+ */
+ start = 0;
+ for (;;) {
+ resource_size_t max_size = 0;
+ int max_no = -1;
+
+ /* Find next biggest resource */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ r = &dev->resource[i];
+ if (!(r->flags & IORESOURCE_UNSET) ||
+ !(r->flags & flags))
+ continue;
+ if (resource_size(r) > max_size) {
+ max_size = resource_size(r);
+ max_no = i;
+ }
+ }
+ if (max_no < 0)
+ break;
+ r = &dev->resource[max_no];
+ if (max_size > *align)
+ *align = max_size;
+ *size += max_size;
+ r->start = start;
+ start += max_size;
+ r->end = r->start + max_size - 1;
+ r->flags &= ~IORESOURCE_UNSET;
+ pr_devel(" -> R%d %016llx..%016llx\n",
+ max_no, r->start, r->end);
+ }
+ pr_devel(" <- CDR %s size=%llx align=%llx\n",
+ pci_name(dev), *size, *align);
+}
+
+/* Allocate a resource "wrap" for a given device or bridge and
+ * insert it at the right position in the sorted list
+ */
+static void __devinit pnv_ioda_add_wrap(struct list_head *list,
+ struct pci_bus *bus,
+ struct pci_dev *dev,
+ resource_size_t size,
+ resource_size_t align)
+{
+ struct resource_wrap *w1, *w = kzalloc(sizeof(*w), GFP_KERNEL);
+
+ w->size = size;
+ w->align = align;
+ w->dev = dev;
+ w->bus = bus;
+
+ list_for_each_entry(w1, list, link) {
+ if (w1->align < align) {
+ list_add_tail(&w->link, &w1->link);
+ return;
+ }
+ }
+ list_add_tail(&w->link, list);
+}
+
+/* Offset device resources of a given type */
+static void __devinit pnv_ioda_offset_dev(struct pci_dev *dev,
+ unsigned int flags,
+ resource_size_t offset)
+{
+ struct resource *r;
+ int i;
+
+ pr_devel(" -> ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
+
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ r = &dev->resource[i];
+ if (r->flags & flags) {
+ dev->resource[i].start += offset;
+ dev->resource[i].end += offset;
+ }
+ }
+
+ pr_devel(" <- ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
+}
+
+/* Offset bus resources (& all children) of a given type */
+static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus,
+ unsigned int flags,
+ resource_size_t offset)
+{
+ struct resource *r;
+ struct pci_dev *dev;
+ struct pci_bus *cbus;
+ int i;
+
+ pr_devel(" -> OBR %s [%x] +%016llx\n",
+ bus->self ? pci_name(bus->self) : "root", flags, offset);
+
+ for (i = 0; i < 2; i++) {
+ r = bus->resource[i];
+ if (r && (r->flags & flags)) {
+ bus->resource[i]->start += offset;
+ bus->resource[i]->end += offset;
+ }
+ }
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ pnv_ioda_offset_dev(dev, flags, offset);
+ list_for_each_entry(cbus, &bus->children, node)
+ pnv_ioda_offset_bus(cbus, flags, offset);
+
+ pr_devel(" <- OBR %s [%x]\n",
+ bus->self ? pci_name(bus->self) : "root", flags);
+}
+
+/* This is the guts of our IODA resource allocation. This is called
+ * recursively for each bus in the system. It calculates all the
+ * necessary size and requirements for children and assign them
+ * resources such that:
+ *
+ * - Each function fits in it's own contiguous set of IO/M32
+ * segment
+ *
+ * - All segments behind a P2P bridge are contiguous and obey
+ * alignment constraints of those bridges
+ */
+static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
+ resource_size_t *size,
+ resource_size_t *align)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pnv_phb *phb = hose->private_data;
+ resource_size_t dev_size, dev_align, start;
+ resource_size_t min_align, min_balign;
+ struct pci_dev *cdev;
+ struct pci_bus *cbus;
+ struct list_head head;
+ struct resource_wrap *w;
+ unsigned int bres;
+
+ *size = *align = 0;
+
+ pr_devel("-> CBR %s [%x]\n",
+ bus->self ? pci_name(bus->self) : "root", flags);
+
+ /* Calculate alignment requirements based on the type
+ * of resource we are working on
+ */
+ if (flags & IORESOURCE_IO) {
+ bres = 0;
+ min_align = phb->ioda.io_segsize;
+ min_balign = 0x1000;
+ } else {
+ bres = 1;
+ min_align = phb->ioda.m32_segsize;
+ min_balign = 0x100000;
+ }
+
+ /* Gather all our children resources ordered by alignment */
+ INIT_LIST_HEAD(&head);
+
+ /* - Busses */
+ list_for_each_entry(cbus, &bus->children, node) {
+ pnv_ioda_calc_bus(cbus, flags, &dev_size, &dev_align);
+ pnv_ioda_add_wrap(&head, cbus, NULL, dev_size, dev_align);
+ }
+
+ /* - Devices */
+ list_for_each_entry(cdev, &bus->devices, bus_list) {
+ pnv_ioda_calc_dev(cdev, flags, &dev_size, &dev_align);
+ /* Align them to segment size */
+ if (dev_align < min_align)
+ dev_align = min_align;
+ pnv_ioda_add_wrap(&head, NULL, cdev, dev_size, dev_align);
+ }
+ if (list_empty(&head))
+ goto empty;
+
+ /* Now we can do two things: assign offsets to them within that
+ * level and get our total alignment & size requirements. The
+ * assignment algorithm is going to be uber-trivial for now, we
+ * can try to be smarter later at filling out holes.
+ */
+ start = bus->self ? 0 : bus->resource[bres]->start;
+
+ /* Don't hand out IO 0 */
+ if ((flags & IORESOURCE_IO) && !bus->self)
+ start += 0x1000;
+
+ while(!list_empty(&head)) {
+ w = list_first_entry(&head, struct resource_wrap, link);
+ list_del(&w->link);
+ if (w->size) {
+ if (start) {
+ start = ALIGN(start, w->align);
+ if (w->dev)
+ pnv_ioda_offset_dev(w->dev,flags,start);
+ else if (w->bus)
+ pnv_ioda_offset_bus(w->bus,flags,start);
+ }
+ if (w->align > *align)
+ *align = w->align;
+ }
+ start += w->size;
+ kfree(w);
+ }
+ *size = start;
+
+ /* Align and setup bridge resources */
+ *align = max_t(resource_size_t, *align,
+ max_t(resource_size_t, min_align, min_balign));
+ *size = ALIGN(*size,
+ max_t(resource_size_t, min_align, min_balign));
+ empty:
+ /* Only setup P2P's, not the PHB itself */
+ if (bus->self) {
+ WARN_ON(bus->resource[bres] == NULL);
+ bus->resource[bres]->start = 0;
+ bus->resource[bres]->flags = (*size) ? flags : 0;
+ bus->resource[bres]->end = (*size) ? (*size - 1) : 0;
+
+ /* Clear prefetch bus resources for now */
+ bus->resource[2]->flags = 0;
+ }
+
+ pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n",
+ bus->self ? pci_name(bus->self) : "root", flags,*size,*align);
+}
+
+static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev)
+{
+ struct device_node *np;
+
+ np = pci_device_to_OF_node(dev);
+ if (!np)
+ return NULL;
+ return PCI_DN(np);
+}
+
+static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+ unsigned int pe, i;
+ resource_size_t pos;
+ struct resource io_res;
+ struct resource m32_res;
+ struct pci_bus_region region;
+ int rc;
+
+ /* Anything not referenced in the device-tree gets PE#0 */
+ pe = pdn ? pdn->pe_number : 0;
+
+ /* Calculate the device min/max */
+ io_res.start = m32_res.start = (resource_size_t)-1;
+ io_res.end = m32_res.end = 0;
+ io_res.flags = IORESOURCE_IO;
+ m32_res.flags = IORESOURCE_MEM;
+
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *r = NULL;
+ if (dev->resource[i].flags & IORESOURCE_IO)
+ r = &io_res;
+ if (dev->resource[i].flags & IORESOURCE_MEM)
+ r = &m32_res;
+ if (!r)
+ continue;
+ if (dev->resource[i].start < r->start)
+ r->start = dev->resource[i].start;
+ if (dev->resource[i].end > r->end)
+ r->end = dev->resource[i].end;
+ }
+
+ /* Setup IO segments */
+ if (io_res.start < io_res.end) {
+ pcibios_resource_to_bus(dev, ®ion, &io_res);
+ pos = region.start;
+ i = pos / phb->ioda.io_segsize;
+ while(i < phb->ioda.total_pe && pos <= region.end) {
+ if (phb->ioda.io_segmap[i]) {
+ pr_err("%s: Trying to use IO seg #%d which is"
+ " already used by PE# %d\n",
+ pci_name(dev), i,
+ phb->ioda.io_segmap[i]);
+ /* XXX DO SOMETHING TO DISABLE DEVICE ? */
+ break;
+ }
+ phb->ioda.io_segmap[i] = pe;
+ rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
+ OPAL_IO_WINDOW_TYPE,
+ 0, i);
+ if (rc != OPAL_SUCCESS) {
+ pr_err("%s: OPAL error %d setting up mapping"
+ " for IO seg# %d\n",
+ pci_name(dev), rc, i);
+ /* XXX DO SOMETHING TO DISABLE DEVICE ? */
+ break;
+ }
+ pos += phb->ioda.io_segsize;
+ i++;
+ };
+ }
+
+ /* Setup M32 segments */
+ if (m32_res.start < m32_res.end) {
+ pcibios_resource_to_bus(dev, ®ion, &m32_res);
+ pos = region.start;
+ i = pos / phb->ioda.m32_segsize;
+ while(i < phb->ioda.total_pe && pos <= region.end) {
+ if (phb->ioda.m32_segmap[i]) {
+ pr_err("%s: Trying to use M32 seg #%d which is"
+ " already used by PE# %d\n",
+ pci_name(dev), i,
+ phb->ioda.m32_segmap[i]);
+ /* XXX DO SOMETHING TO DISABLE DEVICE ? */
+ break;
+ }
+ phb->ioda.m32_segmap[i] = pe;
+ rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
+ OPAL_M32_WINDOW_TYPE,
+ 0, i);
+ if (rc != OPAL_SUCCESS) {
+ pr_err("%s: OPAL error %d setting up mapping"
+ " for M32 seg# %d\n",
+ pci_name(dev), rc, i);
+ /* XXX DO SOMETHING TO DISABLE DEVICE ? */
+ break;
+ }
+ pos += phb->ioda.m32_segsize;
+ i++;
+ }
+ }
+}
+
+/* Check if a resource still fits in the total IO or M32 range
+ * for a given PHB
+ */
+static int __devinit pnv_ioda_resource_fit(struct pci_controller *hose,
+ struct resource *r)
+{
+ struct resource *bounds;
+
+ if (r->flags & IORESOURCE_IO)
+ bounds = &hose->io_resource;
+ else if (r->flags & IORESOURCE_MEM)
+ bounds = &hose->mem_resources[0];
+ else
+ return 1;
+
+ if (r->start >= bounds->start && r->end <= bounds->end)
+ return 1;
+ r->flags = 0;
+ return 0;
+}
+
+static void __devinit pnv_ioda_update_resources(struct pci_bus *bus)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pci_bus *cbus;
+ struct pci_dev *cdev;
+ unsigned int i;
+
+ /* We used to clear all device enables here. However it looks like
+ * clearing MEM enable causes Obsidian (IPR SCS) to go bonkers,
+ * and shoot fatal errors to the PHB which in turns fences itself
+ * and we can't recover from that ... yet. So for now, let's leave
+ * the enables as-is and hope for the best.
+ */
+
+ /* Check if bus resources fit in our IO or M32 range */
+ for (i = 0; bus->self && (i < 2); i++) {
+ struct resource *r = bus->resource[i];
+ if (r && !pnv_ioda_resource_fit(hose, r))
+ pr_err("%s: Bus %d resource %d disabled, no room\n",
+ pci_name(bus->self), bus->number, i);
+ }
+
+ /* Update self if it's not a PHB */
+ if (bus->self)
+ pci_setup_bridge(bus);
+
+ /* Update child devices */
+ list_for_each_entry(cdev, &bus->devices, bus_list) {
+ /* Check if resource fits, if not, disabled it */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *r = &cdev->resource[i];
+ if (!pnv_ioda_resource_fit(hose, r))
+ pr_err("%s: Resource %d disabled, no room\n",
+ pci_name(cdev), i);
+ }
+
+ /* Assign segments */
+ pnv_ioda_setup_pe_segments(cdev);
+
+ /* Update HW BARs */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+ pci_update_resource(cdev, i);
+ }
+
+ /* Update child busses */
+ list_for_each_entry(cbus, &bus->children, node)
+ pnv_ioda_update_resources(cbus);
+}
+
+static int __devinit pnv_ioda_alloc_pe(struct pnv_phb *phb)
+{
+ unsigned long pe;
+
+ do {
+ pe = find_next_zero_bit(phb->ioda.pe_alloc,
+ phb->ioda.total_pe, 0);
+ if (pe >= phb->ioda.total_pe)
+ return IODA_INVALID_PE;
+ } while(test_and_set_bit(pe, phb->ioda.pe_alloc));
+
+ phb->ioda.pe_array[pe].pe_number = pe;
+ return pe;
+}
+
+static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
+{
+ WARN_ON(phb->ioda.pe_array[pe].pdev);
+
+ memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe));
+ clear_bit(pe, phb->ioda.pe_alloc);
+}
+
+/* Currently those 2 are only used when MSIs are enabled, this will change
+ * but in the meantime, we need to protect them to avoid warnings
+ */
+#ifdef CONFIG_PCI_MSI
+static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+ if (!pdn)
+ return NULL;
+ if (pdn->pe_number == IODA_INVALID_PE)
+ return NULL;
+ return &phb->ioda.pe_array[pdn->pe_number];
+}
+
+static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
+{
+ struct pnv_ioda_pe *pe = __pnv_ioda_get_one_pe(dev);
+
+ while (!pe && dev->bus->self) {
+ dev = dev->bus->self;
+ pe = __pnv_ioda_get_one_pe(dev);
+ if (pe)
+ pe = pe->bus_pe;
+ }
+ return pe;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ struct pci_dev *parent;
+ uint8_t bcomp, dcomp, fcomp;
+ long rc, rid_end, rid;
+
+ /* Bus validation ? */
+ if (pe->pbus) {
+ int count;
+
+ dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+ fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+ parent = pe->pbus->self;
+ count = pe->pbus->subordinate - pe->pbus->secondary + 1;
+ switch(count) {
+ case 1: bcomp = OpalPciBusAll; break;
+ case 2: bcomp = OpalPciBus7Bits; break;
+ case 4: bcomp = OpalPciBus6Bits; break;
+ case 8: bcomp = OpalPciBus5Bits; break;
+ case 16: bcomp = OpalPciBus4Bits; break;
+ case 32: bcomp = OpalPciBus3Bits; break;
+ default:
+ pr_err("%s: Number of subordinate busses %d"
+ " unsupported\n",
+ pci_name(pe->pbus->self), count);
+ /* Do an exact match only */
+ bcomp = OpalPciBusAll;
+ }
+ rid_end = pe->rid + (count << 8);
+ } else {
+ parent = pe->pdev->bus->self;
+ bcomp = OpalPciBusAll;
+ dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+ fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+ rid_end = pe->rid + 1;
+ }
+
+ /* Associate PE in PELT */
+ rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+ bcomp, dcomp, fcomp, OPAL_MAP_PE);
+ if (rc) {
+ pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
+ return -ENXIO;
+ }
+ opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+ /* Add to all parents PELT-V */
+ while (parent) {
+ struct pci_dn *pdn = pnv_ioda_get_pdn(parent);
+ if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+ rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+ pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
+ /* XXX What to do in case of error ? */
+ }
+ parent = parent->bus->self;
+ }
+ /* Setup reverse map */
+ for (rid = pe->rid; rid < rid_end; rid++)
+ phb->ioda.pe_rmap[rid] = pe->pe_number;
+
+ /* Setup one MVTs on IODA1 */
+ if (phb->type == PNV_PHB_IODA1) {
+ pe->mve_number = pe->pe_number;
+ rc = opal_pci_set_mve(phb->opal_id, pe->mve_number,
+ pe->pe_number);
+ if (rc) {
+ pe_err(pe, "OPAL error %ld setting up MVE %d\n",
+ rc, pe->mve_number);
+ pe->mve_number = -1;
+ } else {
+ rc = opal_pci_set_mve_enable(phb->opal_id,
+ pe->mve_number, OPAL_ENABLE_MVE);
+ if (rc) {
+ pe_err(pe, "OPAL error %ld enabling MVE %d\n",
+ rc, pe->mve_number);
+ pe->mve_number = -1;
+ }
+ }
+ } else if (phb->type == PNV_PHB_IODA2)
+ pe->mve_number = 0;
+
+ return 0;
+}
+
+static void __devinit pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ struct pnv_ioda_pe *lpe;
+
+ list_for_each_entry(lpe, &phb->ioda.pe_list, link) {
+ if (lpe->dma_weight < pe->dma_weight) {
+ list_add_tail(&pe->link, &lpe->link);
+ return;
+ }
+ }
+ list_add_tail(&pe->link, &phb->ioda.pe_list);
+}
+
+static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
+{
+ /* This is quite simplistic. The "base" weight of a device
+ * is 10. 0 means no DMA is to be accounted for it.
+ */
+
+ /* If it's a bridge, no DMA */
+ if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL)
+ return 0;
+
+ /* Reduce the weight of slow USB controllers */
+ if (dev->class == PCI_CLASS_SERIAL_USB_UHCI ||
+ dev->class == PCI_CLASS_SERIAL_USB_OHCI ||
+ dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ return 3;
+
+ /* Increase the weight of RAID (includes Obsidian) */
+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)
+ return 15;
+
+ /* Default */
+ return 10;
+}
+
+static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+ struct pnv_ioda_pe *pe;
+ int pe_num;
+
+ if (!pdn) {
+ pr_err("%s: Device tree node not associated properly\n",
+ pci_name(dev));
+ return NULL;
+ }
+ if (pdn->pe_number != IODA_INVALID_PE)
+ return NULL;
+
+ /* PE#0 has been pre-set */
+ if (dev->bus->number == 0)
+ pe_num = 0;
+ else
+ pe_num = pnv_ioda_alloc_pe(phb);
+ if (pe_num == IODA_INVALID_PE) {
+ pr_warning("%s: Not enough PE# available, disabling device\n",
+ pci_name(dev));
+ return NULL;
+ }
+
+ /* NOTE: We get only one ref to the pci_dev for the pdn, not for the
+ * pointer in the PE data structure, both should be destroyed at the
+ * same time. However, this needs to be looked at more closely again
+ * once we actually start removing things (Hotplug, SR-IOV, ...)
+ *
+ * At some point we want to remove the PDN completely anyways
+ */
+ pe = &phb->ioda.pe_array[pe_num];
+ pci_dev_get(dev);
+ pdn->pcidev = dev;
+ pdn->pe_number = pe_num;
+ pe->pdev = dev;
+ pe->pbus = NULL;
+ pe->tce32_seg = -1;
+ pe->mve_number = -1;
+ pe->rid = dev->bus->number << 8 | pdn->devfn;
+
+ pe_info(pe, "Associated device to PE\n");
+
+ if (pnv_ioda_configure_pe(phb, pe)) {
+ /* XXX What do we do here ? */
+ if (pe_num)
+ pnv_ioda_free_pe(phb, pe_num);
+ pdn->pe_number = IODA_INVALID_PE;
+ pe->pdev = NULL;
+ pci_dev_put(dev);
+ return NULL;
+ }
+
+ /* Assign a DMA weight to the device */
+ pe->dma_weight = pnv_ioda_dma_weight(dev);
+ if (pe->dma_weight != 0) {
+ phb->ioda.dma_weight += pe->dma_weight;
+ phb->ioda.dma_pe_count++;
+ }
+
+ /* Link the PE */
+ pnv_ioda_link_pe_by_weight(phb, pe);
+
+ return pe;
+}
+
+static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+ if (pdn == NULL) {
+ pr_warn("%s: No device node associated with device !\n",
+ pci_name(dev));
+ continue;
+ }
+ pci_dev_get(dev);
+ pdn->pcidev = dev;
+ pdn->pe_number = pe->pe_number;
+ pe->dma_weight += pnv_ioda_dma_weight(dev);
+ if (dev->subordinate)
+ pnv_ioda_setup_same_PE(dev->subordinate, pe);
+ }
+}
+
+static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
+ struct pnv_ioda_pe *ppe)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_bus *bus = dev->subordinate;
+ struct pnv_ioda_pe *pe;
+ int pe_num;
+
+ if (!bus) {
+ pr_warning("%s: Bridge without a subordinate bus !\n",
+ pci_name(dev));
+ return;
+ }
+ pe_num = pnv_ioda_alloc_pe(phb);
+ if (pe_num == IODA_INVALID_PE) {
+ pr_warning("%s: Not enough PE# available, disabling bus\n",
+ pci_name(dev));
+ return;
+ }
+
+ pe = &phb->ioda.pe_array[pe_num];
+ ppe->bus_pe = pe;
+ pe->pbus = bus;
+ pe->pdev = NULL;
+ pe->tce32_seg = -1;
+ pe->mve_number = -1;
+ pe->rid = bus->secondary << 8;
+ pe->dma_weight = 0;
+
+ pe_info(pe, "Secondary busses %d..%d associated with PE\n",
+ bus->secondary, bus->subordinate);
+
+ if (pnv_ioda_configure_pe(phb, pe)) {
+ /* XXX What do we do here ? */
+ if (pe_num)
+ pnv_ioda_free_pe(phb, pe_num);
+ pe->pbus = NULL;
+ return;
+ }
+
+ /* Associate it with all child devices */
+ pnv_ioda_setup_same_PE(bus, pe);
+
+ /* Account for one DMA PE if at least one DMA capable device exist
+ * below the bridge
+ */
+ if (pe->dma_weight != 0) {
+ phb->ioda.dma_weight += pe->dma_weight;
+ phb->ioda.dma_pe_count++;
+ }
+
+ /* Link the PE */
+ pnv_ioda_link_pe_by_weight(phb, pe);
+}
+
+static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ struct pnv_ioda_pe *pe;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ pe = pnv_ioda_setup_dev_PE(dev);
+ if (pe == NULL)
+ continue;
+ /* Leaving the PCIe domain ... single PE# */
+ if (dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+ pnv_ioda_setup_bus_PE(dev, pe);
+ else if (dev->subordinate)
+ pnv_ioda_setup_PEs(dev->subordinate);
+ }
+}
+
+static void __devinit pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb,
+ struct pci_dev *dev)
+{
+ /* We delay DMA setup after we have assigned all PE# */
+}
+
+static void __devinit pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
+ struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ set_iommu_table_base(&dev->dev, &pe->tce32_table);
+ if (dev->subordinate)
+ pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+ }
+}
+
+static void __devinit pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe,
+ unsigned int base,
+ unsigned int segs)
+{
+
+ struct page *tce_mem = NULL;
+ const __be64 *swinvp;
+ struct iommu_table *tbl;
+ unsigned int i;
+ int64_t rc;
+ void *addr;
+
+ /* 256M DMA window, 4K TCE pages, 8 bytes TCE */
+#define TCE32_TABLE_SIZE ((0x10000000 / 0x1000) * 8)
+
+ /* XXX FIXME: Handle 64-bit only DMA devices */
+ /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
+ /* XXX FIXME: Allocate multi-level tables on PHB3 */
+
+ /* We shouldn't already have a 32-bit DMA associated */
+ if (WARN_ON(pe->tce32_seg >= 0))
+ return;
+
+ /* Grab a 32-bit TCE table */
+ pe->tce32_seg = base;
+ pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
+ (base << 28), ((base + segs) << 28) - 1);
+
+ /* XXX Currently, we allocate one big contiguous table for the
+ * TCEs. We only really need one chunk per 256M of TCE space
+ * (ie per segment) but that's an optimization for later, it
+ * requires some added smarts with our get/put_tce implementation
+ */
+ tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
+ get_order(TCE32_TABLE_SIZE * segs));
+ if (!tce_mem) {
+ pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
+ goto fail;
+ }
+ addr = page_address(tce_mem);
+ memset(addr, 0, TCE32_TABLE_SIZE * segs);
+
+ /* Configure HW */
+ for (i = 0; i < segs; i++) {
+ rc = opal_pci_map_pe_dma_window(phb->opal_id,
+ pe->pe_number,
+ base + i, 1,
+ __pa(addr) + TCE32_TABLE_SIZE * i,
+ TCE32_TABLE_SIZE, 0x1000);
+ if (rc) {
+ pe_err(pe, " Failed to configure 32-bit TCE table,"
+ " err %ld\n", rc);
+ goto fail;
+ }
+ }
+
+ /* Setup linux iommu table */
+ tbl = &pe->tce32_table;
+ pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
+ base << 28);
+
+ /* OPAL variant of P7IOC SW invalidated TCEs */
+ swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
+ if (swinvp) {
+ /* We need a couple more fields -- an address and a data
+ * to or. Since the bus is only printed out on table free
+ * errors, and on the first pass the data will be a relative
+ * bus number, print that out instead.
+ */
+ tbl->it_busno = 0;
+ tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE
+ | TCE_PCI_SWINV_PAIR;
+ }
+ iommu_init_table(tbl, phb->hose->node);
+
+ if (pe->pdev)
+ set_iommu_table_base(&pe->pdev->dev, tbl);
+ else
+ pnv_ioda_setup_bus_dma(pe, pe->pbus);
+
+ return;
+ fail:
+ /* XXX Failure: Try to fallback to 64-bit only ? */
+ if (pe->tce32_seg >= 0)
+ pe->tce32_seg = -1;
+ if (tce_mem)
+ __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
+}
+
+static void __devinit pnv_ioda_setup_dma(struct pnv_phb *phb)
+{
+ struct pci_controller *hose = phb->hose;
+ unsigned int residual, remaining, segs, tw, base;
+ struct pnv_ioda_pe *pe;
+
+ /* If we have more PE# than segments available, hand out one
+ * per PE until we run out and let the rest fail. If not,
+ * then we assign at least one segment per PE, plus more based
+ * on the amount of devices under that PE
+ */
+ if (phb->ioda.dma_pe_count > phb->ioda.tce32_count)
+ residual = 0;
+ else
+ residual = phb->ioda.tce32_count -
+ phb->ioda.dma_pe_count;
+
+ pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
+ hose->global_number, phb->ioda.tce32_count);
+ pr_info("PCI: %d PE# for a total weight of %d\n",
+ phb->ioda.dma_pe_count, phb->ioda.dma_weight);
+
+ /* Walk our PE list and configure their DMA segments, hand them
+ * out one base segment plus any residual segments based on
+ * weight
+ */
+ remaining = phb->ioda.tce32_count;
+ tw = phb->ioda.dma_weight;
+ base = 0;
+ list_for_each_entry(pe, &phb->ioda.pe_list, link) {
+ if (!pe->dma_weight)
+ continue;
+ if (!remaining) {
+ pe_warn(pe, "No DMA32 resources available\n");
+ continue;
+ }
+ segs = 1;
+ if (residual) {
+ segs += ((pe->dma_weight * residual) + (tw / 2)) / tw;
+ if (segs > remaining)
+ segs = remaining;
+ }
+ pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
+ pe->dma_weight, segs);
+ pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+ remaining -= segs;
+ base += segs;
+ }
+}
+
+#ifdef CONFIG_PCI_MSI
+static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
+ unsigned int hwirq, unsigned int is_64,
+ struct msi_msg *msg)
+{
+ struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
+ unsigned int xive_num = hwirq - phb->msi_base;
+ uint64_t addr64;
+ uint32_t addr32, data;
+ int rc;
+
+ /* No PE assigned ? bail out ... no MSI for you ! */
+ if (pe == NULL)
+ return -ENXIO;
+
+ /* Check if we have an MVE */
+ if (pe->mve_number < 0)
+ return -ENXIO;
+
+ /* Assign XIVE to PE */
+ rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
+ if (rc) {
+ pr_warn("%s: OPAL error %d setting XIVE %d PE\n",
+ pci_name(dev), rc, xive_num);
+ return -EIO;
+ }
+
+ if (is_64) {
+ rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1,
+ &addr64, &data);
+ if (rc) {
+ pr_warn("%s: OPAL error %d getting 64-bit MSI data\n",
+ pci_name(dev), rc);
+ return -EIO;
+ }
+ msg->address_hi = addr64 >> 32;
+ msg->address_lo = addr64 & 0xfffffffful;
+ } else {
+ rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1,
+ &addr32, &data);
+ if (rc) {
+ pr_warn("%s: OPAL error %d getting 32-bit MSI data\n",
+ pci_name(dev), rc);
+ return -EIO;
+ }
+ msg->address_hi = 0;
+ msg->address_lo = addr32;
+ }
+ msg->data = data;
+
+ pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
+ " address=%x_%08x data=%x PE# %d\n",
+ pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num,
+ msg->address_hi, msg->address_lo, data, pe->pe_number);
+
+ return 0;
+}
+
+static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
+{
+ unsigned int bmap_size;
+ const __be32 *prop = of_get_property(phb->hose->dn,
+ "ibm,opal-msi-ranges", NULL);
+ if (!prop) {
+ /* BML Fallback */
+ prop = of_get_property(phb->hose->dn, "msi-ranges", NULL);
+ }
+ if (!prop)
+ return;
+
+ phb->msi_base = be32_to_cpup(prop);
+ phb->msi_count = be32_to_cpup(prop + 1);
+ bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long);
+ phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL);
+ if (!phb->msi_map) {
+ pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
+ phb->hose->global_number);
+ return;
+ }
+ phb->msi_setup = pnv_pci_ioda_msi_setup;
+ phb->msi32_support = 1;
+ pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
+ phb->msi_count, phb->msi_base);
+}
+#else
+static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
+#endif /* CONFIG_PCI_MSI */
+
+/* This is the starting point of our IODA specific resource
+ * allocation process
+ */
+static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose)
+{
+ resource_size_t size, align;
+ struct pci_bus *child;
+
+ /* Associate PEs per functions */
+ pnv_ioda_setup_PEs(hose->bus);
+
+ /* Calculate all resources */
+ pnv_ioda_calc_bus(hose->bus, IORESOURCE_IO, &size, &align);
+ pnv_ioda_calc_bus(hose->bus, IORESOURCE_MEM, &size, &align);
+
+ /* Apply then to HW */
+ pnv_ioda_update_resources(hose->bus);
+
+ /* Setup DMA */
+ pnv_ioda_setup_dma(hose->private_data);
+
+ /* Configure PCI Express settings */
+ list_for_each_entry(child, &hose->bus->children, node) {
+ struct pci_dev *self = child->self;
+ if (!self)
+ continue;
+ pcie_bus_configure_settings(child, self->pcie_mpss);
+ }
+}
+
+/* Prevent enabling devices for which we couldn't properly
+ * assign a PE
+ */
+static int __devinit pnv_pci_enable_device_hook(struct pci_dev *dev)
+{
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+ if (!pdn || pdn->pe_number == IODA_INVALID_PE)
+ return -EINVAL;
+ return 0;
+}
+
+static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
+ u32 devfn)
+{
+ return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
+}
+
+void __init pnv_pci_init_ioda1_phb(struct device_node *np)
+{
+ struct pci_controller *hose;
+ static int primary = 1;
+ struct pnv_phb *phb;
+ unsigned long size, m32map_off, iomap_off, pemap_off;
+ const u64 *prop64;
+ u64 phb_id;
+ void *aux;
+ long rc;
+
+ pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name);
+
+ prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
+ if (!prop64) {
+ pr_err(" Missing \"ibm,opal-phbid\" property !\n");
+ return;
+ }
+ phb_id = be64_to_cpup(prop64);
+ pr_debug(" PHB-ID : 0x%016llx\n", phb_id);
+
+ phb = alloc_bootmem(sizeof(struct pnv_phb));
+ if (phb) {
+ memset(phb, 0, sizeof(struct pnv_phb));
+ phb->hose = hose = pcibios_alloc_controller(np);
+ }
+ if (!phb || !phb->hose) {
+ pr_err("PCI: Failed to allocate PCI controller for %s\n",
+ np->full_name);
+ return;
+ }
+
+ spin_lock_init(&phb->lock);
+ /* XXX Use device-tree */
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+ hose->private_data = phb;
+ phb->opal_id = phb_id;
+ phb->type = PNV_PHB_IODA1;
+
+ /* Detect specific models for error handling */
+ if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
+ phb->model = PNV_PHB_MODEL_P7IOC;
+ else
+ phb->model = PNV_PHB_MODEL_UNKNOWN;
+
+ /* We parse "ranges" now since we need to deduce the register base
+ * from the IO base
+ */
+ pci_process_bridge_OF_ranges(phb->hose, np, primary);
+ primary = 0;
+
+ /* Magic formula from Milton */
+ phb->regs = of_iomap(np, 0);
+ if (phb->regs == NULL)
+ pr_err(" Failed to map registers !\n");
+
+
+ /* XXX This is hack-a-thon. This needs to be changed so that:
+ * - we obtain stuff like PE# etc... from device-tree
+ * - we properly re-allocate M32 ourselves
+ * (the OFW one isn't very good)
+ */
+
+ /* Initialize more IODA stuff */
+ phb->ioda.total_pe = 128;
+
+ phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
+ /* OFW Has already off top 64k of M32 space (MSI space) */
+ phb->ioda.m32_size += 0x10000;
+
+ phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe;
+ phb->ioda.m32_pci_base = hose->mem_resources[0].start -
+ hose->pci_mem_offset;
+ phb->ioda.io_size = hose->pci_io_size;
+ phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
+ phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
+
+ /* Allocate aux data & arrays */
+ size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
+ m32map_off = size;
+ size += phb->ioda.total_pe;
+ iomap_off = size;
+ size += phb->ioda.total_pe;
+ pemap_off = size;
+ size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
+ aux = alloc_bootmem(size);
+ memset(aux, 0, size);
+ phb->ioda.pe_alloc = aux;
+ phb->ioda.m32_segmap = aux + m32map_off;
+ phb->ioda.io_segmap = aux + iomap_off;
+ phb->ioda.pe_array = aux + pemap_off;
+ set_bit(0, phb->ioda.pe_alloc);
+
+ INIT_LIST_HEAD(&phb->ioda.pe_list);
+
+ /* Calculate how many 32-bit TCE segments we have */
+ phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
+
+ /* Clear unusable m64 */
+ hose->mem_resources[1].flags = 0;
+ hose->mem_resources[1].start = 0;
+ hose->mem_resources[1].end = 0;
+ hose->mem_resources[2].flags = 0;
+ hose->mem_resources[2].start = 0;
+ hose->mem_resources[2].end = 0;
+
+#if 0
+ rc = opal_pci_set_phb_mem_window(opal->phb_id,
+ window_type,
+ window_num,
+ starting_real_address,
+ starting_pci_address,
+ segment_size);
+#endif
+
+ pr_info(" %d PE's M32: 0x%x [segment=0x%x] IO: 0x%x [segment=0x%x]\n",
+ phb->ioda.total_pe,
+ phb->ioda.m32_size, phb->ioda.m32_segsize,
+ phb->ioda.io_size, phb->ioda.io_segsize);
+
+ if (phb->regs) {
+ pr_devel(" BUID = 0x%016llx\n", in_be64(phb->regs + 0x100));
+ pr_devel(" PHB2_CR = 0x%016llx\n", in_be64(phb->regs + 0x160));
+ pr_devel(" IO_BAR = 0x%016llx\n", in_be64(phb->regs + 0x170));
+ pr_devel(" IO_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x178));
+ pr_devel(" IO_SAR = 0x%016llx\n", in_be64(phb->regs + 0x180));
+ pr_devel(" M32_BAR = 0x%016llx\n", in_be64(phb->regs + 0x190));
+ pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198));
+ pr_devel(" M32_SAR = 0x%016llx\n", in_be64(phb->regs + 0x1a0));
+ }
+ phb->hose->ops = &pnv_pci_ops;
+
+ /* Setup RID -> PE mapping function */
+ phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe;
+
+ /* Setup TCEs */
+ phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
+
+ /* Setup MSI support */
+ pnv_pci_init_ioda_msis(phb);
+
+ /* We set both probe_only and PCI_REASSIGN_ALL_RSRC. This is an
+ * odd combination which essentially means that we skip all resource
+ * fixups and assignments in the generic code, and do it all
+ * ourselves here
+ */
+ pci_probe_only = 1;
+ ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb;
+ ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
+ pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+
+ /* Reset IODA tables to a clean state */
+ rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
+ if (rc)
+ pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc);
+ opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+}
+
+void __init pnv_pci_init_ioda_hub(struct device_node *np)
+{
+ struct device_node *phbn;
+ const u64 *prop64;
+ u64 hub_id;
+
+ pr_info("Probing IODA IO-Hub %s\n", np->full_name);
+
+ prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
+ if (!prop64) {
+ pr_err(" Missing \"ibm,opal-hubid\" property !\n");
+ return;
+ }
+ hub_id = be64_to_cpup(prop64);
+ pr_devel(" HUB-ID : 0x%016llx\n", hub_id);
+
+ /* Count child PHBs */
+ for_each_child_of_node(np, phbn) {
+ /* Look for IODA1 PHBs */
+ if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
+ pnv_pci_init_ioda1_phb(phbn);
+ }
+}
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
index 4c80f7c..2649677 100644
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -137,6 +137,7 @@
phb->hose->private_data = phb;
phb->opal_id = phb_id;
phb->type = PNV_PHB_P5IOC2;
+ phb->model = PNV_PHB_MODEL_P5IOC2;
phb->regs = of_iomap(np, 0);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 85bb66d..a70bc1e 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -144,6 +144,112 @@
}
#endif /* CONFIG_PCI_MSI */
+static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
+{
+ struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
+ int i;
+
+ pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
+
+ pr_info(" brdgCtl = 0x%08x\n", data->brdgCtl);
+
+ pr_info(" portStatusReg = 0x%08x\n", data->portStatusReg);
+ pr_info(" rootCmplxStatus = 0x%08x\n", data->rootCmplxStatus);
+ pr_info(" busAgentStatus = 0x%08x\n", data->busAgentStatus);
+
+ pr_info(" deviceStatus = 0x%08x\n", data->deviceStatus);
+ pr_info(" slotStatus = 0x%08x\n", data->slotStatus);
+ pr_info(" linkStatus = 0x%08x\n", data->linkStatus);
+ pr_info(" devCmdStatus = 0x%08x\n", data->devCmdStatus);
+ pr_info(" devSecStatus = 0x%08x\n", data->devSecStatus);
+
+ pr_info(" rootErrorStatus = 0x%08x\n", data->rootErrorStatus);
+ pr_info(" uncorrErrorStatus = 0x%08x\n", data->uncorrErrorStatus);
+ pr_info(" corrErrorStatus = 0x%08x\n", data->corrErrorStatus);
+ pr_info(" tlpHdr1 = 0x%08x\n", data->tlpHdr1);
+ pr_info(" tlpHdr2 = 0x%08x\n", data->tlpHdr2);
+ pr_info(" tlpHdr3 = 0x%08x\n", data->tlpHdr3);
+ pr_info(" tlpHdr4 = 0x%08x\n", data->tlpHdr4);
+ pr_info(" sourceId = 0x%08x\n", data->sourceId);
+
+ pr_info(" errorClass = 0x%016llx\n", data->errorClass);
+ pr_info(" correlator = 0x%016llx\n", data->correlator);
+
+ pr_info(" p7iocPlssr = 0x%016llx\n", data->p7iocPlssr);
+ pr_info(" p7iocCsr = 0x%016llx\n", data->p7iocCsr);
+ pr_info(" lemFir = 0x%016llx\n", data->lemFir);
+ pr_info(" lemErrorMask = 0x%016llx\n", data->lemErrorMask);
+ pr_info(" lemWOF = 0x%016llx\n", data->lemWOF);
+ pr_info(" phbErrorStatus = 0x%016llx\n", data->phbErrorStatus);
+ pr_info(" phbFirstErrorStatus = 0x%016llx\n", data->phbFirstErrorStatus);
+ pr_info(" phbErrorLog0 = 0x%016llx\n", data->phbErrorLog0);
+ pr_info(" phbErrorLog1 = 0x%016llx\n", data->phbErrorLog1);
+ pr_info(" mmioErrorStatus = 0x%016llx\n", data->mmioErrorStatus);
+ pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
+ pr_info(" mmioErrorLog0 = 0x%016llx\n", data->mmioErrorLog0);
+ pr_info(" mmioErrorLog1 = 0x%016llx\n", data->mmioErrorLog1);
+ pr_info(" dma0ErrorStatus = 0x%016llx\n", data->dma0ErrorStatus);
+ pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
+ pr_info(" dma0ErrorLog0 = 0x%016llx\n", data->dma0ErrorLog0);
+ pr_info(" dma0ErrorLog1 = 0x%016llx\n", data->dma0ErrorLog1);
+ pr_info(" dma1ErrorStatus = 0x%016llx\n", data->dma1ErrorStatus);
+ pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
+ pr_info(" dma1ErrorLog0 = 0x%016llx\n", data->dma1ErrorLog0);
+ pr_info(" dma1ErrorLog1 = 0x%016llx\n", data->dma1ErrorLog1);
+
+ for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
+ if ((data->pestA[i] >> 63) == 0 &&
+ (data->pestB[i] >> 63) == 0)
+ continue;
+ pr_info(" PE[%3d] PESTA = 0x%016llx\n", i, data->pestA[i]);
+ pr_info(" PESTB = 0x%016llx\n", data->pestB[i]);
+ }
+}
+
+static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
+{
+ switch(phb->model) {
+ case PNV_PHB_MODEL_P7IOC:
+ pnv_pci_dump_p7ioc_diag_data(phb);
+ break;
+ default:
+ pr_warning("PCI %d: Can't decode this PHB diag data\n",
+ phb->hose->global_number);
+ }
+}
+
+static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
+{
+ unsigned long flags, rc;
+ int has_diag;
+
+ spin_lock_irqsave(&phb->lock, flags);
+
+ rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
+ has_diag = (rc == OPAL_SUCCESS);
+
+ rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ if (rc) {
+ pr_warning("PCI %d: Failed to clear EEH freeze state"
+ " for PE#%d, err %ld\n",
+ phb->hose->global_number, pe_no, rc);
+
+ /* For now, let's only display the diag buffer when we fail to clear
+ * the EEH status. We'll do more sensible things later when we have
+ * proper EEH support. We need to make sure we don't pollute ourselves
+ * with the normal errors generated when probing empty slots
+ */
+ if (has_diag)
+ pnv_pci_dump_phb_diag_data(phb);
+ else
+ pr_warning("PCI %d: No diag data available\n",
+ phb->hose->global_number);
+ }
+
+ spin_unlock_irqrestore(&phb->lock, flags);
+}
+
static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
u32 bdfn)
{
@@ -165,15 +271,8 @@
}
cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
bdfn, pe_no, fstate);
- if (fstate != 0) {
- rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
- OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
- if (rc) {
- pr_warning("PCI %d: Failed to clear EEH freeze state"
- " for PE#%d, err %lld\n",
- phb->hose->global_number, pe_no, rc);
- }
- }
+ if (fstate != 0)
+ pnv_pci_handle_eeh_config(phb, pe_no);
}
static int pnv_pci_read_config(struct pci_bus *bus,
@@ -257,12 +356,54 @@
.write = pnv_pci_write_config,
};
+
+static void pnv_tce_invalidate(struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
+{
+ u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ unsigned long start, end, inc;
+
+ start = __pa(startp);
+ end = __pa(endp);
+
+
+ /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
+ if (tbl->it_busno) {
+ start <<= 12;
+ end <<= 12;
+ inc = 128 << 12;
+ start |= tbl->it_busno;
+ end |= tbl->it_busno;
+ }
+ /* p7ioc-style invalidation, 2 TCEs per write */
+ else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
+ start |= (1ull << 63);
+ end |= (1ull << 63);
+ inc = 16;
+ }
+ /* Default (older HW) */
+ else
+ inc = 128;
+
+ end |= inc - 1; /* round up end to be different than start */
+
+ mb(); /* Ensure above stores are visible */
+ while (start <= end) {
+ __raw_writeq(start, invalidate);
+ start += inc;
+ }
+ /* The iommu layer will do another mb() for us on build() and
+ * we don't care on free()
+ */
+}
+
+
static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
unsigned long uaddr, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
u64 proto_tce;
- u64 *tcep;
+ u64 *tcep, *tces;
u64 rpn;
proto_tce = TCE_PCI_READ; // Read allowed
@@ -270,25 +411,33 @@
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
- tcep = ((u64 *)tbl->it_base) + index;
+ tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
+ rpn = __pa(uaddr) >> TCE_SHIFT;
- while (npages--) {
- /* can't move this out since we might cross LMB boundary */
- rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
- *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+ while (npages--)
+ *(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
- uaddr += TCE_PAGE_SIZE;
- tcep++;
- }
+ /* Some implementations won't cache invalid TCEs and thus may not
+ * need that flush. We'll probably turn it_type into a bit mask
+ * of flags if that becomes the case
+ */
+ if (tbl->it_type & TCE_PCI_SWINV_CREATE)
+ pnv_tce_invalidate(tbl, tces, tcep - 1);
+
return 0;
}
static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
{
- u64 *tcep = ((u64 *)tbl->it_base) + index;
+ u64 *tcep, *tces;
+
+ tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
while (npages--)
*(tcep++) = 0;
+
+ if (tbl->it_type & TCE_PCI_SWINV_FREE)
+ pnv_tce_invalidate(tbl, tces, tcep - 1);
}
void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
@@ -308,13 +457,14 @@
pnv_pci_setup_bml_iommu(struct pci_controller *hose)
{
struct iommu_table *tbl;
- const __be64 *basep;
+ const __be64 *basep, *swinvp;
const __be32 *sizep;
basep = of_get_property(hose->dn, "linux,tce-base", NULL);
sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
if (basep == NULL || sizep == NULL) {
- pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name);
+ pr_err("PCI: %s has missing tce entries !\n",
+ hose->dn->full_name);
return NULL;
}
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
@@ -323,6 +473,15 @@
pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
be32_to_cpup(sizep), 0);
iommu_init_table(tbl, hose->node);
+
+ /* Deal with SW invalidated TCEs when needed (BML way) */
+ swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
+ NULL);
+ if (swinvp) {
+ tbl->it_busno = swinvp[1];
+ tbl->it_index = (unsigned long)ioremap(swinvp[0], 8);
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+ }
return tbl;
}
@@ -356,6 +515,13 @@
pnv_pci_dma_fallback_setup(hose, pdev);
}
+/* Fixup wrong class code in p7ioc root complex */
+static void __devinit pnv_p7ioc_rc_quirk(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
+
static int pnv_pci_probe_mode(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
@@ -400,12 +566,24 @@
init_pci_config_tokens();
find_and_init_phbs();
#endif /* CONFIG_PPC_POWERNV_RTAS */
- } else {
- /* OPAL is here, do our normal stuff */
+ }
+ /* OPAL is here, do our normal stuff */
+ else {
+ int found_ioda = 0;
+
+ /* Look for IODA IO-Hubs. We don't support mixing IODA
+ * and p5ioc2 due to the need to change some global
+ * probing flags
+ */
+ for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
+ pnv_pci_init_ioda_hub(np);
+ found_ioda = 1;
+ }
/* Look for p5ioc2 IO-Hubs */
- for_each_compatible_node(np, NULL, "ibm,p5ioc2")
- pnv_pci_init_p5ioc2_hub(np);
+ if (!found_ioda)
+ for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+ pnv_pci_init_p5ioc2_hub(np);
}
/* Setup the linkage between OF nodes and PHBs */
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index d4dbc49..8bc4796 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -9,9 +9,63 @@
PNV_PHB_IODA2,
};
+/* Precise PHB model for error management */
+enum pnv_phb_model {
+ PNV_PHB_MODEL_UNKNOWN,
+ PNV_PHB_MODEL_P5IOC2,
+ PNV_PHB_MODEL_P7IOC,
+};
+
+#define PNV_PCI_DIAG_BUF_SIZE 4096
+
+/* Data associated with a PE, including IOMMU tracking etc.. */
+struct pnv_ioda_pe {
+ /* A PE can be associated with a single device or an
+ * entire bus (& children). In the former case, pdev
+ * is populated, in the later case, pbus is.
+ */
+ struct pci_dev *pdev;
+ struct pci_bus *pbus;
+
+ /* Effective RID (device RID for a device PE and base bus
+ * RID with devfn 0 for a bus PE)
+ */
+ unsigned int rid;
+
+ /* PE number */
+ unsigned int pe_number;
+
+ /* "Weight" assigned to the PE for the sake of DMA resource
+ * allocations
+ */
+ unsigned int dma_weight;
+
+ /* This is a PCI-E -> PCI-X bridge, this points to the
+ * corresponding bus PE
+ */
+ struct pnv_ioda_pe *bus_pe;
+
+ /* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
+ int tce32_seg;
+ int tce32_segcount;
+ struct iommu_table tce32_table;
+
+ /* XXX TODO: Add support for additional 64-bit iommus */
+
+ /* MSIs. MVE index is identical for for 32 and 64 bit MSI
+ * and -1 if not supported. (It's actually identical to the
+ * PE number)
+ */
+ int mve_number;
+
+ /* Link in list of PE#s */
+ struct list_head link;
+};
+
struct pnv_phb {
struct pci_controller *hose;
enum pnv_phb_type type;
+ enum pnv_phb_model model;
u64 opal_id;
void __iomem *regs;
spinlock_t lock;
@@ -34,7 +88,52 @@
struct {
struct iommu_table iommu_table;
} p5ioc2;
+
+ struct {
+ /* Global bridge info */
+ unsigned int total_pe;
+ unsigned int m32_size;
+ unsigned int m32_segsize;
+ unsigned int m32_pci_base;
+ unsigned int io_size;
+ unsigned int io_segsize;
+ unsigned int io_pci_base;
+
+ /* PE allocation bitmap */
+ unsigned long *pe_alloc;
+
+ /* M32 & IO segment maps */
+ unsigned int *m32_segmap;
+ unsigned int *io_segmap;
+ struct pnv_ioda_pe *pe_array;
+
+ /* Reverse map of PEs, will have to extend if
+ * we are to support more than 256 PEs, indexed
+ * bus { bus, devfn }
+ */
+ unsigned char pe_rmap[0x10000];
+
+ /* 32-bit TCE tables allocation */
+ unsigned long tce32_count;
+
+ /* Total "weight" for the sake of DMA resources
+ * allocation
+ */
+ unsigned int dma_weight;
+ unsigned int dma_pe_count;
+
+ /* Sorted list of used PE's, sorted at
+ * boot for resource allocation purposes
+ */
+ struct list_head pe_list;
+ } ioda;
};
+
+ /* PHB status structure */
+ union {
+ unsigned char blob[PNV_PCI_DIAG_BUF_SIZE];
+ struct OpalIoP7IOCPhbErrorData p7ioc;
+ } diag;
};
extern struct pci_ops pnv_pci_ops;
@@ -43,6 +142,7 @@
void *tce_mem, u64 tce_size,
u64 dma_offset);
extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
+extern void pnv_pci_init_ioda_hub(struct device_node *np);
#endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index e877366..17210c5 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -75,7 +75,7 @@
/* On OPAL v2 the CPU are still spinning inside OPAL itself,
* get them back now
*/
- if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+ if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) {
pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
rc = opal_start_cpu(pcpu, start_here);
if (rc != OPAL_SUCCESS)
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 1d6f4f4..617efa1 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -31,18 +31,18 @@
#if defined(DEBUG)
#define DBG udbg_printf
+#define FAIL udbg_printf
#else
-#define DBG pr_debug
+#define DBG pr_devel
+#define FAIL pr_debug
#endif
/**
* struct ps3_bmp - a per cpu irq status and mask bitmap structure
* @status: 256 bit status bitmap indexed by plug
- * @unused_1:
+ * @unused_1: Alignment
* @mask: 256 bit mask bitmap indexed by plug
- * @unused_2:
- * @lock:
- * @ipi_debug_brk_mask:
+ * @unused_2: Alignment
*
* The HV maintains per SMT thread mappings of HV outlet to HV plug on
* behalf of the guest. These mappings are implemented as 256 bit guest
@@ -73,21 +73,24 @@
unsigned long mask;
u64 unused_2[3];
};
- u64 ipi_debug_brk_mask;
- spinlock_t lock;
};
/**
* struct ps3_private - a per cpu data structure
* @bmp: ps3_bmp structure
+ * @bmp_lock: Syncronize access to bmp.
+ * @ipi_debug_brk_mask: Mask for debug break IPIs
* @ppe_id: HV logical_ppe_id
* @thread_id: HV thread_id
+ * @ipi_mask: Mask of IPI virqs
*/
struct ps3_private {
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
+ spinlock_t bmp_lock;
u64 ppe_id;
u64 thread_id;
+ unsigned long ipi_debug_brk_mask;
unsigned long ipi_mask;
};
@@ -105,7 +108,7 @@
struct ps3_private *pd = irq_data_get_irq_chip_data(d);
unsigned long flags;
- pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
+ DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, d->irq);
local_irq_save(flags);
@@ -126,7 +129,7 @@
struct ps3_private *pd = irq_data_get_irq_chip_data(d);
unsigned long flags;
- pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
+ DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, d->irq);
local_irq_save(flags);
@@ -190,19 +193,19 @@
*virq = irq_create_mapping(NULL, outlet);
if (*virq == NO_IRQ) {
- pr_debug("%s:%d: irq_create_mapping failed: outlet %lu\n",
+ FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n",
__func__, __LINE__, outlet);
result = -ENOMEM;
goto fail_create;
}
- pr_debug("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
+ DBG("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
outlet, cpu, *virq);
result = irq_set_chip_data(*virq, pd);
if (result) {
- pr_debug("%s:%d: irq_set_chip_data failed\n",
+ FAIL("%s:%d: irq_set_chip_data failed\n",
__func__, __LINE__);
goto fail_set;
}
@@ -228,13 +231,13 @@
{
const struct ps3_private *pd = irq_get_chip_data(virq);
- pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
+ DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
irq_set_chip_data(virq, NULL);
irq_dispose_mapping(virq);
- pr_debug("%s:%d <-\n", __func__, __LINE__);
+ DBG("%s:%d <-\n", __func__, __LINE__);
return 0;
}
@@ -257,7 +260,7 @@
result = ps3_virq_setup(cpu, outlet, virq);
if (result) {
- pr_debug("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
+ FAIL("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
goto fail_setup;
}
@@ -269,7 +272,7 @@
outlet, 0);
if (result) {
- pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
+ FAIL("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
__func__, __LINE__, ps3_result(result));
result = -EPERM;
goto fail_connect;
@@ -298,7 +301,7 @@
int result;
const struct ps3_private *pd = irq_get_chip_data(virq);
- pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
+ DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
ps3_chip_mask(irq_get_irq_data(virq));
@@ -306,7 +309,7 @@
result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq);
if (result)
- pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
+ FAIL("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
__func__, __LINE__, ps3_result(result));
ps3_virq_destroy(virq);
@@ -334,7 +337,7 @@
result = lv1_construct_event_receive_port(&outlet);
if (result) {
- pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n",
+ FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
*virq = NO_IRQ;
return result;
@@ -360,14 +363,14 @@
{
int result;
- pr_debug(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
+ DBG(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
ps3_chip_mask(irq_get_irq_data(virq));
result = lv1_destruct_event_receive_port(virq_to_hw(virq));
if (result)
- pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
+ FAIL("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
/*
@@ -375,7 +378,7 @@
* calls from interrupt context (smp_call_function) when kexecing.
*/
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ DBG(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -411,7 +414,7 @@
dev->dev_id, virq_to_hw(*virq), dev->interrupt_id);
if (result) {
- pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port"
+ FAIL("%s:%d: lv1_connect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
ps3_event_receive_port_destroy(*virq);
@@ -419,7 +422,7 @@
return result;
}
- pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+ DBG("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
dev->interrupt_id, *virq);
return 0;
@@ -433,14 +436,14 @@
int result;
- pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+ DBG(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
dev->interrupt_id, virq);
result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id,
dev->dev_id, virq_to_hw(virq), dev->interrupt_id);
if (result)
- pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port"
+ FAIL("%s:%d: lv1_disconnect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
@@ -455,7 +458,7 @@
result = ps3_virq_destroy(virq);
BUG_ON(result);
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ DBG(" <- %s:%d\n", __func__, __LINE__);
return result;
}
EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy);
@@ -480,7 +483,7 @@
result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
if (result) {
- pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
+ FAIL("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
@@ -510,7 +513,7 @@
result = lv1_destruct_io_irq_outlet(outlet);
if (result)
- pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
+ FAIL("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
@@ -542,7 +545,7 @@
result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
if (result) {
- pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+ FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
@@ -562,7 +565,7 @@
result = lv1_deconfigure_virtual_uart_irq();
if (result) {
- pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+ FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
@@ -595,7 +598,7 @@
result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
if (result) {
- pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
+ FAIL("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
@@ -626,7 +629,7 @@
static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
const char* func, int line)
{
- pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n",
+ pr_debug("%s:%d: %s %u {%04llx_%04llx_%04llx_%04llx}\n",
func, line, header, cpu,
*p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
*p & 0xffff);
@@ -635,7 +638,7 @@
static void __maybe_unused _dump_256_bmp(const char *header,
const u64 *p, unsigned cpu, const char* func, int line)
{
- pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n",
+ pr_debug("%s:%d: %s %u {%016llx:%016llx:%016llx:%016llx}\n",
func, line, header, cpu, p[0], p[1], p[2], p[3]);
}
@@ -644,10 +647,10 @@
{
unsigned long flags;
- spin_lock_irqsave(&pd->bmp.lock, flags);
+ spin_lock_irqsave(&pd->bmp_lock, flags);
_dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line);
- _dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
- spin_unlock_irqrestore(&pd->bmp.lock, flags);
+ _dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
+ spin_unlock_irqrestore(&pd->bmp_lock, flags);
}
#define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
@@ -656,9 +659,9 @@
{
unsigned long flags;
- spin_lock_irqsave(&pd->bmp.lock, flags);
- _dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
- spin_unlock_irqrestore(&pd->bmp.lock, flags);
+ spin_lock_irqsave(&pd->bmp_lock, flags);
+ _dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
+ spin_unlock_irqrestore(&pd->bmp_lock, flags);
}
#else
static void dump_bmp(struct ps3_private* pd) {};
@@ -667,7 +670,7 @@
static int ps3_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hwirq)
{
- pr_debug("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
+ DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
virq);
irq_set_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq);
@@ -690,10 +693,10 @@
{
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
- pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
+ set_bit(63 - virq, &pd->ipi_debug_brk_mask);
- pr_debug("%s:%d: cpu %u, virq %u, mask %llxh\n", __func__, __LINE__,
- cpu, virq, pd->bmp.ipi_debug_brk_mask);
+ DBG("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
+ cpu, virq, pd->ipi_debug_brk_mask);
}
void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
@@ -714,14 +717,14 @@
/* check for ipi break first to stop this cpu ASAP */
- if (x & pd->bmp.ipi_debug_brk_mask)
- x &= pd->bmp.ipi_debug_brk_mask;
+ if (x & pd->ipi_debug_brk_mask)
+ x &= pd->ipi_debug_brk_mask;
asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
plug &= 0x3f;
if (unlikely(plug == NO_IRQ)) {
- pr_debug("%s:%d: no plug found: thread_id %llu\n", __func__,
+ DBG("%s:%d: no plug found: thread_id %llu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
dump_bmp(&per_cpu(ps3_private, 1));
@@ -760,9 +763,9 @@
lv1_get_logical_ppe_id(&pd->ppe_id);
pd->thread_id = get_hard_smp_processor_id(cpu);
- spin_lock_init(&pd->bmp.lock);
+ spin_lock_init(&pd->bmp_lock);
- pr_debug("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
+ DBG("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
__func__, __LINE__, pd->ppe_id, pd->thread_id,
ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
@@ -770,7 +773,7 @@
pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
if (result)
- pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:"
+ FAIL("%s:%d: lv1_configure_irq_state_bitmap failed:"
" %s\n", __func__, __LINE__,
ps3_result(result));
}
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 72714ad..8bd6ba5 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -319,7 +319,6 @@
}
memblock_add(start_addr, map.r1.size);
- memblock_analyze();
result = online_pages(start_pfn, nr_pages);
diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c
index ca40f6a..7bdfea3 100644
--- a/arch/powerpc/platforms/ps3/repository.c
+++ b/arch/powerpc/platforms/ps3/repository.c
@@ -44,7 +44,7 @@
s[i] = (in[i] <= 126 && in[i] >= 32) ? in[i] : '.';
s[i] = 0;
- pr_debug("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
+ pr_devel("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
#endif
}
@@ -53,7 +53,7 @@
static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
u64 n4, const char *func, int line)
{
- pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
+ pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id);
_dump_field("n1: ", n1, func, line);
_dump_field("n2: ", n2, func, line);
_dump_field("n3: ", n3, func, line);
@@ -65,13 +65,13 @@
static void _dump_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
u64 v1, u64 v2, const char *func, int line)
{
- pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
+ pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id);
_dump_field("n1: ", n1, func, line);
_dump_field("n2: ", n2, func, line);
_dump_field("n3: ", n3, func, line);
_dump_field("n4: ", n4, func, line);
- pr_debug("%s:%d: v1: %016llx\n", func, line, v1);
- pr_debug("%s:%d: v2: %016llx\n", func, line, v2);
+ pr_devel("%s:%d: v1: %016llx\n", func, line, v1);
+ pr_devel("%s:%d: v2: %016llx\n", func, line, v2);
}
/**
@@ -131,11 +131,11 @@
lpar_id = id;
}
- result = lv1_get_repository_node_value(lpar_id, n1, n2, n3, n4, &v1,
+ result = lv1_read_repository_node(lpar_id, n1, n2, n3, n4, &v1,
&v2);
if (result) {
- pr_debug("%s:%d: lv1_get_repository_node_value failed: %s\n",
+ pr_warn("%s:%d: lv1_read_repository_node failed: %s\n",
__func__, __LINE__, ps3_result(result));
dump_node_name(lpar_id, n1, n2, n3, n4);
return -ENOENT;
@@ -149,10 +149,10 @@
*_v2 = v2;
if (v1 && !_v1)
- pr_debug("%s:%d: warning: discarding non-zero v1: %016llx\n",
+ pr_devel("%s:%d: warning: discarding non-zero v1: %016llx\n",
__func__, __LINE__, v1);
if (v2 && !_v2)
- pr_debug("%s:%d: warning: discarding non-zero v2: %016llx\n",
+ pr_devel("%s:%d: warning: discarding non-zero v2: %016llx\n",
__func__, __LINE__, v2);
return 0;
@@ -323,16 +323,16 @@
result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
if (result) {
- pr_debug("%s:%d read_bus_num_dev failed\n", __func__, __LINE__);
+ pr_devel("%s:%d read_bus_num_dev failed\n", __func__, __LINE__);
return result;
}
- pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
+ pr_devel("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
__func__, __LINE__, tmp.bus_type, tmp.bus_index, tmp.bus_id,
num_dev);
if (tmp.dev_index >= num_dev) {
- pr_debug("%s:%d: no device found\n", __func__, __LINE__);
+ pr_devel("%s:%d: no device found\n", __func__, __LINE__);
return -ENODEV;
}
@@ -340,7 +340,7 @@
&tmp.dev_type);
if (result) {
- pr_debug("%s:%d read_dev_type failed\n", __func__, __LINE__);
+ pr_devel("%s:%d read_dev_type failed\n", __func__, __LINE__);
return result;
}
@@ -348,12 +348,12 @@
&tmp.dev_id);
if (result) {
- pr_debug("%s:%d ps3_repository_read_dev_id failed\n", __func__,
+ pr_devel("%s:%d ps3_repository_read_dev_id failed\n", __func__,
__LINE__);
return result;
}
- pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
+ pr_devel("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
__func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id);
*repo = tmp;
@@ -367,14 +367,14 @@
struct ps3_repository_device tmp;
unsigned int num_dev;
- pr_debug(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
+ pr_devel(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
bus_id, dev_id);
for (tmp.bus_index = 0; tmp.bus_index < 10; tmp.bus_index++) {
result = ps3_repository_read_bus_id(tmp.bus_index,
&tmp.bus_id);
if (result) {
- pr_debug("%s:%u read_bus_id(%u) failed\n", __func__,
+ pr_devel("%s:%u read_bus_id(%u) failed\n", __func__,
__LINE__, tmp.bus_index);
return result;
}
@@ -382,23 +382,23 @@
if (tmp.bus_id == bus_id)
goto found_bus;
- pr_debug("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
+ pr_devel("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
tmp.bus_id);
}
- pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+ pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__);
return result;
found_bus:
result = ps3_repository_read_bus_type(tmp.bus_index, &tmp.bus_type);
if (result) {
- pr_debug("%s:%u read_bus_type(%u) failed\n", __func__,
+ pr_devel("%s:%u read_bus_type(%u) failed\n", __func__,
__LINE__, tmp.bus_index);
return result;
}
result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
if (result) {
- pr_debug("%s:%u read_bus_num_dev failed\n", __func__,
+ pr_devel("%s:%u read_bus_num_dev failed\n", __func__,
__LINE__);
return result;
}
@@ -408,7 +408,7 @@
tmp.dev_index,
&tmp.dev_id);
if (result) {
- pr_debug("%s:%u read_dev_id(%u:%u) failed\n", __func__,
+ pr_devel("%s:%u read_dev_id(%u:%u) failed\n", __func__,
__LINE__, tmp.bus_index, tmp.dev_index);
return result;
}
@@ -416,21 +416,21 @@
if (tmp.dev_id == dev_id)
goto found_dev;
- pr_debug("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
+ pr_devel("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
tmp.dev_id);
}
- pr_debug(" <- %s:%u: dev not found\n", __func__, __LINE__);
+ pr_devel(" <- %s:%u: dev not found\n", __func__, __LINE__);
return result;
found_dev:
result = ps3_repository_read_dev_type(tmp.bus_index, tmp.dev_index,
&tmp.dev_type);
if (result) {
- pr_debug("%s:%u read_dev_type failed\n", __func__, __LINE__);
+ pr_devel("%s:%u read_dev_type failed\n", __func__, __LINE__);
return result;
}
- pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
+ pr_devel(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
__func__, __LINE__, tmp.bus_type, tmp.dev_type, tmp.bus_index,
tmp.dev_index, tmp.bus_id, tmp.dev_id);
*repo = tmp;
@@ -443,18 +443,18 @@
int result = 0;
struct ps3_repository_device repo;
- pr_debug(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
+ pr_devel(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
repo.bus_type = bus_type;
result = ps3_repository_find_bus(repo.bus_type, 0, &repo.bus_index);
if (result) {
- pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+ pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__);
return result;
}
result = ps3_repository_read_bus_id(repo.bus_index, &repo.bus_id);
if (result) {
- pr_debug("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
+ pr_devel("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
repo.bus_index);
return result;
}
@@ -469,13 +469,13 @@
result = callback(&repo);
if (result) {
- pr_debug("%s:%d: abort at callback\n", __func__,
+ pr_devel("%s:%d: abort at callback\n", __func__,
__LINE__);
break;
}
}
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -489,7 +489,7 @@
for (i = from; i < 10; i++) {
error = ps3_repository_read_bus_type(i, &type);
if (error) {
- pr_debug("%s:%d read_bus_type failed\n",
+ pr_devel("%s:%d read_bus_type failed\n",
__func__, __LINE__);
*bus_index = UINT_MAX;
return error;
@@ -509,7 +509,7 @@
int result = 0;
unsigned int res_index;
- pr_debug("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type);
+ pr_devel("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type);
*interrupt_id = UINT_MAX;
@@ -521,7 +521,7 @@
repo->dev_index, res_index, &t, &id);
if (result) {
- pr_debug("%s:%d read_dev_intr failed\n",
+ pr_devel("%s:%d read_dev_intr failed\n",
__func__, __LINE__);
return result;
}
@@ -535,7 +535,7 @@
if (res_index == 10)
return -ENODEV;
- pr_debug("%s:%d: found intr_type %u at res_index %u\n",
+ pr_devel("%s:%d: found intr_type %u at res_index %u\n",
__func__, __LINE__, intr_type, res_index);
return result;
@@ -547,7 +547,7 @@
int result = 0;
unsigned int res_index;
- pr_debug("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type);
+ pr_devel("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type);
*bus_addr = *len = 0;
@@ -560,7 +560,7 @@
repo->dev_index, res_index, &t, &a, &l);
if (result) {
- pr_debug("%s:%d read_dev_reg failed\n",
+ pr_devel("%s:%d read_dev_reg failed\n",
__func__, __LINE__);
return result;
}
@@ -575,7 +575,7 @@
if (res_index == 10)
return -ENODEV;
- pr_debug("%s:%d: found reg_type %u at res_index %u\n",
+ pr_devel("%s:%d: found reg_type %u at res_index %u\n",
__func__, __LINE__, reg_type, res_index);
return result;
@@ -1009,7 +1009,7 @@
int result = 0;
unsigned int res_index;
- pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
+ pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
for (res_index = 0; res_index < 10; res_index++) {
@@ -1021,13 +1021,13 @@
if (result) {
if (result != LV1_NO_ENTRY)
- pr_debug("%s:%d ps3_repository_read_dev_intr"
+ pr_devel("%s:%d ps3_repository_read_dev_intr"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
break;
}
- pr_debug("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n",
+ pr_devel("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n",
__func__, __LINE__, repo->bus_index, repo->dev_index,
intr_type, interrupt_id);
}
@@ -1042,18 +1042,18 @@
if (result) {
if (result != LV1_NO_ENTRY)
- pr_debug("%s:%d ps3_repository_read_dev_reg"
+ pr_devel("%s:%d ps3_repository_read_dev_reg"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
break;
}
- pr_debug("%s:%d (%u:%u) reg_type %u, bus_addr %lxh, len %lxh\n",
+ pr_devel("%s:%d (%u:%u) reg_type %u, bus_addr %llxh, len %llxh\n",
__func__, __LINE__, repo->bus_index, repo->dev_index,
reg_type, bus_addr, len);
}
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -1063,22 +1063,22 @@
unsigned int num_regions, region_index;
u64 port, blk_size, num_blocks;
- pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
+ pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
result = ps3_repository_read_stor_dev_info(repo->bus_index,
repo->dev_index, &port, &blk_size, &num_blocks, &num_regions);
if (result) {
- pr_debug("%s:%d ps3_repository_read_stor_dev_info"
+ pr_devel("%s:%d ps3_repository_read_stor_dev_info"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
goto out;
}
- pr_debug("%s:%d (%u:%u): port %lu, blk_size %lu, num_blocks "
- "%lu, num_regions %u\n",
- __func__, __LINE__, repo->bus_index, repo->dev_index, port,
- blk_size, num_blocks, num_regions);
+ pr_devel("%s:%d (%u:%u): port %llu, blk_size %llu, num_blocks "
+ "%llu, num_regions %u\n",
+ __func__, __LINE__, repo->bus_index, repo->dev_index,
+ port, blk_size, num_blocks, num_regions);
for (region_index = 0; region_index < num_regions; region_index++) {
unsigned int region_id;
@@ -1088,19 +1088,20 @@
repo->dev_index, region_index, ®ion_id,
®ion_start, ®ion_size);
if (result) {
- pr_debug("%s:%d ps3_repository_read_stor_dev_region"
+ pr_devel("%s:%d ps3_repository_read_stor_dev_region"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
break;
}
- pr_debug("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n",
+ pr_devel("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n",
__func__, __LINE__, repo->bus_index, repo->dev_index,
- region_id, region_start, region_size);
+ region_id, (unsigned long)region_start,
+ (unsigned long)region_size);
}
out:
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -1109,7 +1110,7 @@
{
int result = 0;
- pr_debug(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index);
+ pr_devel(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index);
for (repo->dev_index = 0; repo->dev_index < num_dev;
repo->dev_index++) {
@@ -1118,7 +1119,7 @@
repo->dev_index, &repo->dev_type);
if (result) {
- pr_debug("%s:%d ps3_repository_read_dev_type"
+ pr_devel("%s:%d ps3_repository_read_dev_type"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
break;
@@ -1128,15 +1129,15 @@
repo->dev_index, &repo->dev_id);
if (result) {
- pr_debug("%s:%d ps3_repository_read_dev_id"
+ pr_devel("%s:%d ps3_repository_read_dev_id"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
continue;
}
- pr_debug("%s:%d (%u:%u): dev_type %u, dev_id %lu\n", __func__,
+ pr_devel("%s:%d (%u:%u): dev_type %u, dev_id %lu\n", __func__,
__LINE__, repo->bus_index, repo->dev_index,
- repo->dev_type, repo->dev_id);
+ repo->dev_type, (unsigned long)repo->dev_id);
ps3_repository_dump_resource_info(repo);
@@ -1144,7 +1145,7 @@
dump_stor_dev_info(repo);
}
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -1153,7 +1154,7 @@
int result = 0;
struct ps3_repository_device repo;
- pr_debug(" -> %s:%d\n", __func__, __LINE__);
+ pr_devel(" -> %s:%d\n", __func__, __LINE__);
memset(&repo, 0, sizeof(repo));
@@ -1164,7 +1165,7 @@
&repo.bus_type);
if (result) {
- pr_debug("%s:%d read_bus_type(%u) failed\n",
+ pr_devel("%s:%d read_bus_type(%u) failed\n",
__func__, __LINE__, repo.bus_index);
break;
}
@@ -1173,32 +1174,32 @@
&repo.bus_id);
if (result) {
- pr_debug("%s:%d read_bus_id(%u) failed\n",
+ pr_devel("%s:%d read_bus_id(%u) failed\n",
__func__, __LINE__, repo.bus_index);
continue;
}
if (repo.bus_index != repo.bus_id)
- pr_debug("%s:%d bus_index != bus_id\n",
+ pr_devel("%s:%d bus_index != bus_id\n",
__func__, __LINE__);
result = ps3_repository_read_bus_num_dev(repo.bus_index,
&num_dev);
if (result) {
- pr_debug("%s:%d read_bus_num_dev(%u) failed\n",
+ pr_devel("%s:%d read_bus_num_dev(%u) failed\n",
__func__, __LINE__, repo.bus_index);
continue;
}
- pr_debug("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
+ pr_devel("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
__func__, __LINE__, repo.bus_index, repo.bus_type,
- repo.bus_id, num_dev);
+ (unsigned long)repo.bus_id, num_dev);
dump_device_info(&repo, num_dev);
}
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index e8ec1b2..2d664c5 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -193,10 +193,12 @@
static void __init ps3_setup_arch(void)
{
+ u64 tmp;
DBG(" -> %s:%d\n", __func__, __LINE__);
- lv1_get_version_info(&ps3_firmware_version.raw);
+ lv1_get_version_info(&ps3_firmware_version.raw, &tmp);
+
printk(KERN_INFO "PS3 firmware version %u.%u.%u\n",
ps3_firmware_version.major, ps3_firmware_version.minor,
ps3_firmware_version.rev);
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index efc1cd8..4b35166 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -57,7 +57,7 @@
" (%d)\n", __func__, __LINE__, cpu, msg, result);
}
-static int ps3_smp_probe(void)
+static int __init ps3_smp_probe(void)
{
int cpu;
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 451fad1..e17fa14 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -154,7 +154,7 @@
u64 id;
lv1_get_logical_ppe_id(&id);
- lv1_get_virtual_address_space_id_of_ppe(id, &id);
+ lv1_get_virtual_address_space_id_of_ppe(&id);
return id;
}
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c81f6bb..ae7b6d4 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -120,3 +120,12 @@
which are accessible through a debugfs file.
Say N if you are unsure.
+
+config PSERIES_IDLE
+ tristate "Cpuidle driver for pSeries platforms"
+ depends on CPU_IDLE
+ depends on PPC_PSERIES
+ default y
+ help
+ Select this option to enable processor idle state management
+ through cpuidle subsystem.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 3556e40..236db46 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -22,6 +22,7 @@
obj-$(CONFIG_CMM) += cmm.o
obj-$(CONFIG_DTL) += dtl.o
obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o
+obj-$(CONFIG_PSERIES_IDLE) += processor_idle.o
ifeq ($(CONFIG_PPC_PSERIES),y)
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index 3cafc30..c638535 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -33,7 +33,7 @@
#include <linux/sched.h>
#include <linux/stringify.h>
#include <linux/swap.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <asm/firmware.h>
#include <asm/hvcall.h>
#include <asm/mmu.h>
@@ -65,7 +65,7 @@
static unsigned int cmm_debug = CMM_DEBUG;
static unsigned int cmm_disabled = CMM_DISABLE;
static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
-static struct sys_device cmm_sysdev;
+static struct device cmm_dev;
MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
@@ -347,25 +347,25 @@
}
#define CMM_SHOW(name, format, args...) \
- static ssize_t show_##name(struct sys_device *dev, \
- struct sysdev_attribute *attr, \
+ static ssize_t show_##name(struct device *dev, \
+ struct device_attribute *attr, \
char *buf) \
{ \
return sprintf(buf, format, ##args); \
} \
- static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
+ static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
-static ssize_t show_oom_pages(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_oom_pages(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
}
-static ssize_t store_oom_pages(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t store_oom_pages(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long val = simple_strtoul (buf, NULL, 10);
@@ -379,17 +379,18 @@
return count;
}
-static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO,
+static DEVICE_ATTR(oom_freed_kb, S_IWUSR | S_IRUGO,
show_oom_pages, store_oom_pages);
-static struct sysdev_attribute *cmm_attrs[] = {
- &attr_loaned_kb,
- &attr_loaned_target_kb,
- &attr_oom_freed_kb,
+static struct device_attribute *cmm_attrs[] = {
+ &dev_attr_loaned_kb,
+ &dev_attr_loaned_target_kb,
+ &dev_attr_oom_freed_kb,
};
-static struct sysdev_class cmm_sysdev_class = {
+static struct bus_type cmm_subsys = {
.name = "cmm",
+ .dev_name = "cmm",
};
/**
@@ -398,21 +399,21 @@
* Return value:
* 0 on success / other on failure
**/
-static int cmm_sysfs_register(struct sys_device *sysdev)
+static int cmm_sysfs_register(struct device *dev)
{
int i, rc;
- if ((rc = sysdev_class_register(&cmm_sysdev_class)))
+ if ((rc = subsys_system_register(&cmm_subsys, NULL)))
return rc;
- sysdev->id = 0;
- sysdev->cls = &cmm_sysdev_class;
+ dev->id = 0;
+ dev->bus = &cmm_subsys;
- if ((rc = sysdev_register(sysdev)))
- goto class_unregister;
+ if ((rc = device_register(dev)))
+ goto subsys_unregister;
for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
- if ((rc = sysdev_create_file(sysdev, cmm_attrs[i])))
+ if ((rc = device_create_file(dev, cmm_attrs[i])))
goto fail;
}
@@ -420,10 +421,10 @@
fail:
while (--i >= 0)
- sysdev_remove_file(sysdev, cmm_attrs[i]);
- sysdev_unregister(sysdev);
-class_unregister:
- sysdev_class_unregister(&cmm_sysdev_class);
+ device_remove_file(dev, cmm_attrs[i]);
+ device_unregister(dev);
+subsys_unregister:
+ bus_unregister(&cmm_subsys);
return rc;
}
@@ -431,14 +432,14 @@
* cmm_unregister_sysfs - Unregister from sysfs
*
**/
-static void cmm_unregister_sysfs(struct sys_device *sysdev)
+static void cmm_unregister_sysfs(struct device *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
- sysdev_remove_file(sysdev, cmm_attrs[i]);
- sysdev_unregister(sysdev);
- sysdev_class_unregister(&cmm_sysdev_class);
+ device_remove_file(dev, cmm_attrs[i]);
+ device_unregister(dev);
+ bus_unregister(&cmm_subsys);
}
/**
@@ -657,7 +658,7 @@
if ((rc = register_reboot_notifier(&cmm_reboot_nb)))
goto out_oom_notifier;
- if ((rc = cmm_sysfs_register(&cmm_sysdev)))
+ if ((rc = cmm_sysfs_register(&cmm_dev)))
goto out_reboot_notifier;
if (register_memory_notifier(&cmm_mem_nb) ||
@@ -678,7 +679,7 @@
out_unregister_notifier:
unregister_memory_notifier(&cmm_mem_nb);
unregister_memory_isolate_notifier(&cmm_mem_isolate_nb);
- cmm_unregister_sysfs(&cmm_sysdev);
+ cmm_unregister_sysfs(&cmm_dev);
out_reboot_notifier:
unregister_reboot_notifier(&cmm_reboot_nb);
out_oom_notifier:
@@ -701,7 +702,7 @@
unregister_memory_notifier(&cmm_mem_nb);
unregister_memory_isolate_notifier(&cmm_mem_isolate_nb);
cmm_free_pages(loaned_pages);
- cmm_unregister_sysfs(&cmm_sysdev);
+ cmm_unregister_sysfs(&cmm_dev);
}
/**
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index f106662..c9311cf 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -109,7 +109,7 @@
if (opcode > MAX_HCALL_OPCODE)
return;
- h = &get_cpu_var(hcall_stats)[opcode / 4];
+ h = &__get_cpu_var(hcall_stats)[opcode / 4];
h->tb_start = mftb();
h->purr_start = mfspr(SPRN_PURR);
}
@@ -126,8 +126,6 @@
h->num_calls++;
h->tb_total += mftb() - h->tb_start;
h->purr_total += mfspr(SPRN_PURR) - h->purr_start;
-
- put_cpu_var(hcall_stats);
}
static int __init hcall_inst_init(void)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index b719d97..c442f2b 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -52,13 +52,42 @@
#include "plpar_wrappers.h"
+static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
+{
+ u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ unsigned long start, end, inc;
+
+ start = __pa(startp);
+ end = __pa(endp);
+ inc = L1_CACHE_BYTES; /* invalidate a cacheline of TCEs at a time */
+
+ /* If this is non-zero, change the format. We shift the
+ * address and or in the magic from the device tree. */
+ if (tbl->it_busno) {
+ start <<= 12;
+ end <<= 12;
+ inc <<= 12;
+ start |= tbl->it_busno;
+ end |= tbl->it_busno;
+ }
+
+ end |= inc - 1; /* round up end to be different than start */
+
+ mb(); /* Make sure TCEs in memory are written */
+ while (start <= end) {
+ out_be64(invalidate, start);
+ start += inc;
+ }
+}
+
static int tce_build_pSeries(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
u64 proto_tce;
- u64 *tcep;
+ u64 *tcep, *tces;
u64 rpn;
proto_tce = TCE_PCI_READ; // Read allowed
@@ -66,7 +95,7 @@
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
- tcep = ((u64 *)tbl->it_base) + index;
+ tces = tcep = ((u64 *)tbl->it_base) + index;
while (npages--) {
/* can't move this out since we might cross MEMBLOCK boundary */
@@ -76,18 +105,24 @@
uaddr += TCE_PAGE_SIZE;
tcep++;
}
+
+ if (tbl->it_type == TCE_PCI_SWINV_CREATE)
+ tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
return 0;
}
static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
{
- u64 *tcep;
+ u64 *tcep, *tces;
- tcep = ((u64 *)tbl->it_base) + index;
+ tces = tcep = ((u64 *)tbl->it_base) + index;
while (npages--)
*(tcep++) = 0;
+
+ if (tbl->it_type == TCE_PCI_SWINV_FREE)
+ tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
}
static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
@@ -425,7 +460,7 @@
struct iommu_table *tbl)
{
struct device_node *node;
- const unsigned long *basep;
+ const unsigned long *basep, *sw_inval;
const u32 *sizep;
node = phb->dn;
@@ -462,6 +497,22 @@
tbl->it_index = 0;
tbl->it_blocksize = 16;
tbl->it_type = TCE_PCI;
+
+ sw_inval = of_get_property(node, "linux,tce-sw-invalidate-info", NULL);
+ if (sw_inval) {
+ /*
+ * This property contains information on how to
+ * invalidate the TCE entry. The first property is
+ * the base MMIO address used to invalidate entries.
+ * The second property tells us the format of the TCE
+ * invalidate (whether it needs to be shifted) and
+ * some magic routing info to add to our invalidate
+ * command.
+ */
+ tbl->it_index = (unsigned long) ioremap(sw_inval[0], 8);
+ tbl->it_busno = sw_inval[1]; /* overload this with magic */
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+ }
}
/*
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 27a4950..948e0e3 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -554,7 +554,10 @@
goto out;
(*depth)++;
+ preempt_disable();
trace_hcall_entry(opcode, args);
+ if (opcode == H_CEDE)
+ rcu_idle_enter();
(*depth)--;
out:
@@ -575,7 +578,10 @@
goto out;
(*depth)++;
+ if (opcode == H_CEDE)
+ rcu_idle_exit();
trace_hcall_exit(opcode, retval, retbuf);
+ preempt_enable();
(*depth)--;
out:
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index a76b228..330a57b 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -625,6 +625,8 @@
{
static unsigned int oops_count = 0;
static bool panicking = false;
+ static DEFINE_SPINLOCK(lock);
+ unsigned long flags;
size_t text_len;
unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ;
int rc = -1;
@@ -655,6 +657,9 @@
if (clobbering_unread_rtas_event())
return;
+ if (!spin_trylock_irqsave(&lock, flags))
+ return;
+
if (big_oops_buf) {
text_len = capture_last_msgs(old_msgs, old_len,
new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
@@ -670,4 +675,6 @@
(void) nvram_write_os_partition(&oops_log_partition, oops_buf,
(int) (sizeof(*oops_len) + *oops_len), err_type, ++oops_count);
+
+ spin_unlock_irqrestore(&lock, flags);
}
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
new file mode 100644
index 0000000..085fd3f
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -0,0 +1,329 @@
+/*
+ * processor_idle - idle state cpuidle driver.
+ * Adapted from drivers/idle/intel_idle.c and
+ * drivers/acpi/processor_idle.c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu.h>
+
+#include <asm/paca.h>
+#include <asm/reg.h>
+#include <asm/system.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+
+#include "plpar_wrappers.h"
+#include "pseries.h"
+
+struct cpuidle_driver pseries_idle_driver = {
+ .name = "pseries_idle",
+ .owner = THIS_MODULE,
+};
+
+#define MAX_IDLE_STATE_COUNT 2
+
+static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
+static struct cpuidle_device __percpu *pseries_cpuidle_devices;
+static struct cpuidle_state *cpuidle_state_table;
+
+void update_smt_snooze_delay(int snooze)
+{
+ struct cpuidle_driver *drv = cpuidle_get_driver();
+ if (drv)
+ drv->states[0].target_residency = snooze;
+}
+
+static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+{
+
+ *kt_before = ktime_get_real();
+ *in_purr = mfspr(SPRN_PURR);
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ get_lppaca()->idle = 1;
+}
+
+static inline s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+{
+ get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
+ get_lppaca()->idle = 0;
+
+ return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+}
+
+static int snooze_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+ unsigned long start_snooze;
+ long snooze = drv->states[0].target_residency;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+
+ if (snooze) {
+ start_snooze = get_tb() + snooze * tb_ticks_per_usec;
+ local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
+
+ while ((snooze < 0) || (get_tb() < start_snooze)) {
+ if (need_resched() || cpu_is_offline(dev->cpu))
+ goto out;
+ ppc64_runlatch_off();
+ HMT_low();
+ HMT_very_low();
+ }
+
+ HMT_medium();
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb();
+ local_irq_disable();
+ }
+
+out:
+ HMT_medium();
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+static int dedicated_cede_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+ get_lppaca()->donate_dedicated_cpu = 1;
+
+ ppc64_runlatch_off();
+ HMT_medium();
+ cede_processor();
+
+ get_lppaca()->donate_dedicated_cpu = 0;
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+static int shared_cede_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+
+ /*
+ * Yield the processor to the hypervisor. We return if
+ * an external interrupt occurs (which are driven prior
+ * to returning here) or if a prod occurs from another
+ * processor. When returning here, external interrupts
+ * are enabled.
+ */
+ cede_processor();
+
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+/*
+ * States for dedicated partition case.
+ */
+static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
+ { /* Snooze */
+ .name = "snooze",
+ .desc = "snooze",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 0,
+ .target_residency = 0,
+ .enter = &snooze_loop },
+ { /* CEDE */
+ .name = "CEDE",
+ .desc = "CEDE",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 10,
+ .enter = &dedicated_cede_loop },
+};
+
+/*
+ * States for shared partition case.
+ */
+static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
+ { /* Shared Cede */
+ .name = "Shared Cede",
+ .desc = "Shared Cede",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 0,
+ .target_residency = 0,
+ .enter = &shared_cede_loop },
+};
+
+int pseries_notify_cpuidle_add_cpu(int cpu)
+{
+ struct cpuidle_device *dev =
+ per_cpu_ptr(pseries_cpuidle_devices, cpu);
+ if (dev && cpuidle_get_driver()) {
+ cpuidle_disable_device(dev);
+ cpuidle_enable_device(dev);
+ }
+ return 0;
+}
+
+/*
+ * pseries_cpuidle_driver_init()
+ */
+static int pseries_cpuidle_driver_init(void)
+{
+ int idle_state;
+ struct cpuidle_driver *drv = &pseries_idle_driver;
+
+ drv->state_count = 0;
+
+ for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) {
+
+ if (idle_state > max_idle_state)
+ break;
+
+ /* is the state not enabled? */
+ if (cpuidle_state_table[idle_state].enter == NULL)
+ continue;
+
+ drv->states[drv->state_count] = /* structure copy */
+ cpuidle_state_table[idle_state];
+
+ if (cpuidle_state_table == dedicated_states)
+ drv->states[drv->state_count].target_residency =
+ __get_cpu_var(smt_snooze_delay);
+
+ drv->state_count += 1;
+ }
+
+ return 0;
+}
+
+/* pseries_idle_devices_uninit(void)
+ * unregister cpuidle devices and de-allocate memory
+ */
+static void pseries_idle_devices_uninit(void)
+{
+ int i;
+ struct cpuidle_device *dev;
+
+ for_each_possible_cpu(i) {
+ dev = per_cpu_ptr(pseries_cpuidle_devices, i);
+ cpuidle_unregister_device(dev);
+ }
+
+ free_percpu(pseries_cpuidle_devices);
+ return;
+}
+
+/* pseries_idle_devices_init()
+ * allocate, initialize and register cpuidle device
+ */
+static int pseries_idle_devices_init(void)
+{
+ int i;
+ struct cpuidle_driver *drv = &pseries_idle_driver;
+ struct cpuidle_device *dev;
+
+ pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+ if (pseries_cpuidle_devices == NULL)
+ return -ENOMEM;
+
+ for_each_possible_cpu(i) {
+ dev = per_cpu_ptr(pseries_cpuidle_devices, i);
+ dev->state_count = drv->state_count;
+ dev->cpu = i;
+ if (cpuidle_register_device(dev)) {
+ printk(KERN_DEBUG \
+ "cpuidle_register_device %d failed!\n", i);
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * pseries_idle_probe()
+ * Choose state table for shared versus dedicated partition
+ */
+static int pseries_idle_probe(void)
+{
+
+ if (!firmware_has_feature(FW_FEATURE_SPLPAR))
+ return -ENODEV;
+
+ if (cpuidle_disable != IDLE_NO_OVERRIDE)
+ return -ENODEV;
+
+ if (max_idle_state == 0) {
+ printk(KERN_DEBUG "pseries processor idle disabled.\n");
+ return -EPERM;
+ }
+
+ if (get_lppaca()->shared_proc)
+ cpuidle_state_table = shared_states;
+ else
+ cpuidle_state_table = dedicated_states;
+
+ return 0;
+}
+
+static int __init pseries_processor_idle_init(void)
+{
+ int retval;
+
+ retval = pseries_idle_probe();
+ if (retval)
+ return retval;
+
+ pseries_cpuidle_driver_init();
+ retval = cpuidle_register_driver(&pseries_idle_driver);
+ if (retval) {
+ printk(KERN_DEBUG "Registration of pseries driver failed.\n");
+ return retval;
+ }
+
+ retval = pseries_idle_devices_init();
+ if (retval) {
+ pseries_idle_devices_uninit();
+ cpuidle_unregister_driver(&pseries_idle_driver);
+ return retval;
+ }
+
+ printk(KERN_DEBUG "pseries_idle_driver registered\n");
+
+ return 0;
+}
+
+static void __exit pseries_processor_idle_exit(void)
+{
+
+ pseries_idle_devices_uninit();
+ cpuidle_unregister_driver(&pseries_idle_driver);
+
+ return;
+}
+
+module_init(pseries_processor_idle_init);
+module_exit(pseries_processor_idle_exit);
+
+MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("Cpuidle driver for POWER");
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 24c7162..9a3dda0 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -57,4 +57,7 @@
extern int dlpar_attach_node(struct device_node *);
extern int dlpar_detach_node(struct device_node *);
+/* Snooze Delay, pseries_idle */
+DECLARE_PER_CPU(long, smt_snooze_delay);
+
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c
index c8b3c69..af281dc 100644
--- a/arch/powerpc/platforms/pseries/pseries_energy.c
+++ b/arch/powerpc/platforms/pseries/pseries_energy.c
@@ -15,7 +15,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/seq_file.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/cpu.h>
#include <linux/of.h>
#include <asm/cputhreads.h>
@@ -184,7 +184,7 @@
return s-page;
}
-static ssize_t get_best_energy_data(struct sys_device *dev,
+static ssize_t get_best_energy_data(struct device *dev,
char *page, int activate)
{
int rc;
@@ -207,26 +207,26 @@
/* Wrapper functions */
-static ssize_t cpu_activate_hint_list_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr, char *page)
+static ssize_t cpu_activate_hint_list_show(struct device *dev,
+ struct device_attribute *attr, char *page)
{
return get_best_energy_list(page, 1);
}
-static ssize_t cpu_deactivate_hint_list_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr, char *page)
+static ssize_t cpu_deactivate_hint_list_show(struct device *dev,
+ struct device_attribute *attr, char *page)
{
return get_best_energy_list(page, 0);
}
-static ssize_t percpu_activate_hint_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *page)
+static ssize_t percpu_activate_hint_show(struct device *dev,
+ struct device_attribute *attr, char *page)
{
return get_best_energy_data(dev, page, 1);
}
-static ssize_t percpu_deactivate_hint_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *page)
+static ssize_t percpu_deactivate_hint_show(struct device *dev,
+ struct device_attribute *attr, char *page)
{
return get_best_energy_data(dev, page, 0);
}
@@ -241,48 +241,48 @@
* Per-cpu value of the hint
*/
-struct sysdev_class_attribute attr_cpu_activate_hint_list =
- _SYSDEV_CLASS_ATTR(pseries_activate_hint_list, 0444,
+struct device_attribute attr_cpu_activate_hint_list =
+ __ATTR(pseries_activate_hint_list, 0444,
cpu_activate_hint_list_show, NULL);
-struct sysdev_class_attribute attr_cpu_deactivate_hint_list =
- _SYSDEV_CLASS_ATTR(pseries_deactivate_hint_list, 0444,
+struct device_attribute attr_cpu_deactivate_hint_list =
+ __ATTR(pseries_deactivate_hint_list, 0444,
cpu_deactivate_hint_list_show, NULL);
-struct sysdev_attribute attr_percpu_activate_hint =
- _SYSDEV_ATTR(pseries_activate_hint, 0444,
+struct device_attribute attr_percpu_activate_hint =
+ __ATTR(pseries_activate_hint, 0444,
percpu_activate_hint_show, NULL);
-struct sysdev_attribute attr_percpu_deactivate_hint =
- _SYSDEV_ATTR(pseries_deactivate_hint, 0444,
+struct device_attribute attr_percpu_deactivate_hint =
+ __ATTR(pseries_deactivate_hint, 0444,
percpu_deactivate_hint_show, NULL);
static int __init pseries_energy_init(void)
{
int cpu, err;
- struct sys_device *cpu_sys_dev;
+ struct device *cpu_dev;
if (!check_for_h_best_energy()) {
printk(KERN_INFO "Hypercall H_BEST_ENERGY not supported\n");
return 0;
}
/* Create the sysfs files */
- err = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
- &attr_cpu_activate_hint_list.attr);
+ err = device_create_file(cpu_subsys.dev_root,
+ &attr_cpu_activate_hint_list);
if (!err)
- err = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
- &attr_cpu_deactivate_hint_list.attr);
+ err = device_create_file(cpu_subsys.dev_root,
+ &attr_cpu_deactivate_hint_list);
if (err)
return err;
for_each_possible_cpu(cpu) {
- cpu_sys_dev = get_cpu_sysdev(cpu);
- err = sysfs_create_file(&cpu_sys_dev->kobj,
- &attr_percpu_activate_hint.attr);
+ cpu_dev = get_cpu_device(cpu);
+ err = device_create_file(cpu_dev,
+ &attr_percpu_activate_hint);
if (err)
break;
- err = sysfs_create_file(&cpu_sys_dev->kobj,
- &attr_percpu_deactivate_hint.attr);
+ err = device_create_file(cpu_dev,
+ &attr_percpu_deactivate_hint);
if (err)
break;
}
@@ -298,23 +298,20 @@
static void __exit pseries_energy_cleanup(void)
{
int cpu;
- struct sys_device *cpu_sys_dev;
+ struct device *cpu_dev;
if (!sysfs_entries)
return;
/* Remove the sysfs files */
- sysfs_remove_file(&cpu_sysdev_class.kset.kobj,
- &attr_cpu_activate_hint_list.attr);
-
- sysfs_remove_file(&cpu_sysdev_class.kset.kobj,
- &attr_cpu_deactivate_hint_list.attr);
+ device_remove_file(cpu_subsys.dev_root, &attr_cpu_activate_hint_list);
+ device_remove_file(cpu_subsys.dev_root, &attr_cpu_deactivate_hint_list);
for_each_possible_cpu(cpu) {
- cpu_sys_dev = get_cpu_sysdev(cpu);
- sysfs_remove_file(&cpu_sys_dev->kobj,
+ cpu_dev = get_cpu_device(cpu);
+ sysfs_remove_file(&cpu_dev->kobj,
&attr_percpu_activate_hint.attr);
- sysfs_remove_file(&cpu_sys_dev->kobj,
+ sysfs_remove_file(&cpu_dev->kobj,
&attr_percpu_deactivate_hint.attr);
}
}
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c3408ca..f79f127 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,6 +39,7 @@
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
+#include <linux/cpuidle.h>
#include <asm/mmu.h>
#include <asm/processor.h>
@@ -74,9 +75,6 @@
int fwnmi_active; /* TRUE if an FWNMI handler is present */
-static void pseries_shared_idle_sleep(void);
-static void pseries_dedicated_idle_sleep(void);
-
static struct device_node *pSeries_mpic_node;
static void pSeries_show_cpuinfo(struct seq_file *m)
@@ -192,8 +190,7 @@
BUG_ON(openpic_addr == 0);
/* Setup the openpic driver */
- mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
- MPIC_PRIMARY,
+ mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, 0,
16, 250, /* isu size, irq count */
" MPIC ");
BUG_ON(mpic == NULL);
@@ -352,8 +349,25 @@
}
early_initcall(alloc_dispatch_log_kmem_cache);
+static void pSeries_idle(void)
+{
+ /* This would call on the cpuidle framework, and the back-end pseries
+ * driver to go to idle states
+ */
+ if (cpuidle_idle_call()) {
+ /* On error, execute default handler
+ * to go into low thread priority and possibly
+ * low power mode.
+ */
+ HMT_low();
+ HMT_very_low();
+ }
+}
+
static void __init pSeries_setup_arch(void)
{
+ panic_timeout = 10;
+
/* Discover PIC type and setup ppc_md accordingly */
pseries_discover_pic();
@@ -374,18 +388,9 @@
pSeries_nvram_init();
- /* Choose an idle loop */
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
vpa_init(boot_cpuid);
- if (get_lppaca()->shared_proc) {
- printk(KERN_DEBUG "Using shared processor idle loop\n");
- ppc_md.power_save = pseries_shared_idle_sleep;
- } else {
- printk(KERN_DEBUG "Using dedicated idle loop\n");
- ppc_md.power_save = pseries_dedicated_idle_sleep;
- }
- } else {
- printk(KERN_DEBUG "Using default idle loop\n");
+ ppc_md.power_save = pSeries_idle;
}
if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -586,80 +591,6 @@
return 1;
}
-
-DECLARE_PER_CPU(long, smt_snooze_delay);
-
-static void pseries_dedicated_idle_sleep(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned long start_snooze;
- unsigned long in_purr, out_purr;
- long snooze = __get_cpu_var(smt_snooze_delay);
-
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
- get_lppaca()->donate_dedicated_cpu = 1;
- in_purr = mfspr(SPRN_PURR);
-
- /*
- * We come in with interrupts disabled, and need_resched()
- * has been checked recently. If we should poll for a little
- * while, do so.
- */
- if (snooze) {
- start_snooze = get_tb() + snooze * tb_ticks_per_usec;
- local_irq_enable();
- set_thread_flag(TIF_POLLING_NRFLAG);
-
- while ((snooze < 0) || (get_tb() < start_snooze)) {
- if (need_resched() || cpu_is_offline(cpu))
- goto out;
- ppc64_runlatch_off();
- HMT_low();
- HMT_very_low();
- }
-
- HMT_medium();
- clear_thread_flag(TIF_POLLING_NRFLAG);
- smp_mb();
- local_irq_disable();
- if (need_resched() || cpu_is_offline(cpu))
- goto out;
- }
-
- cede_processor();
-
-out:
- HMT_medium();
- out_purr = mfspr(SPRN_PURR);
- get_lppaca()->wait_state_cycles += out_purr - in_purr;
- get_lppaca()->donate_dedicated_cpu = 0;
- get_lppaca()->idle = 0;
-}
-
-static void pseries_shared_idle_sleep(void)
-{
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
-
- /*
- * Yield the processor to the hypervisor. We return if
- * an external interrupt occurs (which are driven prior
- * to returning here) or if a prod occurs from another
- * processor. When returning here, external interrupts
- * are enabled.
- */
- cede_processor();
-
- get_lppaca()->idle = 0;
-}
-
static int pSeries_pci_probe_mode(struct pci_bus *bus)
{
if (firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 26e93fd..eadba95 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -22,7 +22,7 @@
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/cpu.h>
#include <asm/ptrace.h>
@@ -148,6 +148,7 @@
set_cpu_current_state(cpu, CPU_STATE_ONLINE);
set_default_offline_state(cpu);
#endif
+ pseries_notify_cpuidle_add_cpu(cpu);
}
static int __devinit smp_pSeries_kick_cpu(int nr)
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index d3de084..b84a8b2 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -26,7 +26,7 @@
#include <asm/rtas.h>
static u64 stream_id;
-static struct sys_device suspend_sysdev;
+static struct device suspend_dev;
static DECLARE_COMPLETION(suspend_work);
static struct rtas_suspend_me_data suspend_data;
static atomic_t suspending;
@@ -110,8 +110,8 @@
/**
* store_hibernate - Initiate partition hibernation
- * @classdev: sysdev class struct
- * @attr: class device attribute struct
+ * @dev: subsys root device
+ * @attr: device attribute struct
* @buf: buffer
* @count: buffer size
*
@@ -121,8 +121,8 @@
* Return value:
* number of bytes printed to buffer / other on failure
**/
-static ssize_t store_hibernate(struct sysdev_class *classdev,
- struct sysdev_class_attribute *attr,
+static ssize_t store_hibernate(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
int rc;
@@ -148,10 +148,11 @@
return rc;
}
-static SYSDEV_CLASS_ATTR(hibernate, S_IWUSR, NULL, store_hibernate);
+static DEVICE_ATTR(hibernate, S_IWUSR, NULL, store_hibernate);
-static struct sysdev_class suspend_sysdev_class = {
+static struct bus_type suspend_subsys = {
.name = "power",
+ .dev_name = "power",
};
static const struct platform_suspend_ops pseries_suspend_ops = {
@@ -167,23 +168,23 @@
* Return value:
* 0 on success / other on failure
**/
-static int pseries_suspend_sysfs_register(struct sys_device *sysdev)
+static int pseries_suspend_sysfs_register(struct device *dev)
{
int rc;
- if ((rc = sysdev_class_register(&suspend_sysdev_class)))
+ if ((rc = subsys_system_register(&suspend_subsys, NULL)))
return rc;
- sysdev->id = 0;
- sysdev->cls = &suspend_sysdev_class;
+ dev->id = 0;
+ dev->bus = &suspend_subsys;
- if ((rc = sysdev_class_create_file(&suspend_sysdev_class, &attr_hibernate)))
- goto class_unregister;
+ if ((rc = device_create_file(suspend_subsys.dev_root, &dev_attr_hibernate)))
+ goto subsys_unregister;
return 0;
-class_unregister:
- sysdev_class_unregister(&suspend_sysdev_class);
+subsys_unregister:
+ bus_unregister(&suspend_subsys);
return rc;
}
@@ -204,7 +205,7 @@
if (suspend_data.token == RTAS_UNKNOWN_SERVICE)
return 0;
- if ((rc = pseries_suspend_sysfs_register(&suspend_sysdev)))
+ if ((rc = pseries_suspend_sysfs_register(&suspend_dev)))
return rc;
ppc_md.suspend_disable_cpu = pseries_suspend_cpu;
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
index bd560c7..57d22a2 100644
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ b/arch/powerpc/platforms/wsp/Kconfig
@@ -1,20 +1,28 @@
config PPC_WSP
bool
select PPC_A2
+ select GENERIC_TBSYNC
+ select PPC_ICSWX
select PPC_SCOM
select PPC_XICS
select PPC_ICP_NATIVE
select PCI
select PPC_IO_WORKAROUNDS if PCI
select PPC_INDIRECT_PIO if PCI
+ select PPC_WSP_COPRO
default n
menu "WSP platform selection"
depends on PPC_BOOK3E_64
config PPC_PSR2
- bool "PSR-2 platform"
- select GENERIC_TBSYNC
+ bool "PowerEN System Reference Platform 2"
+ select EPAPR_BOOT
+ select PPC_WSP
+ default y
+
+config PPC_CHROMA
+ bool "PowerEN PCIe Chroma Card"
select EPAPR_BOOT
select PPC_WSP
default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
index a1486b4..56817ac 100644
--- a/arch/powerpc/platforms/wsp/Makefile
+++ b/arch/powerpc/platforms/wsp/Makefile
@@ -1,8 +1,10 @@
ccflags-y += -mno-minimal-toc
-obj-y += setup.o ics.o
-obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o
+obj-y += setup.o ics.o wsp.o
+obj-$(CONFIG_PPC_PSR2) += psr2.o
+obj-$(CONFIG_PPC_CHROMA) += chroma.o h8.o
+obj-$(CONFIG_PPC_WSP) += opb_pic.o
obj-$(CONFIG_PPC_WSP) += scom_wsp.o
obj-$(CONFIG_SMP) += smp.o scom_smp.o
obj-$(CONFIG_PCI) += wsp_pci.o
-obj-$(CONFIG_PCI_MSI) += msi.o
\ No newline at end of file
+obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c
new file mode 100644
index 0000000..ca6fa26
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/chroma.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+void __init chroma_setup_arch(void)
+{
+ wsp_setup_arch();
+ wsp_setup_h8();
+
+}
+
+static int __init chroma_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma"))
+ return 0;
+
+ return 1;
+}
+
+define_machine(chroma_md) {
+ .name = "Chroma PCIe",
+ .probe = chroma_probe,
+ .setup_arch = chroma_setup_arch,
+ .restart = wsp_h8_restart,
+ .power_off = wsp_h8_power_off,
+ .halt = wsp_halt,
+ .calibrate_decr = generic_calibrate_decr,
+ .init_IRQ = wsp_setup_irq,
+ .progress = udbg_progress,
+ .power_save = book3e_idle,
+};
+
+machine_arch_initcall(chroma_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c
new file mode 100644
index 0000000..d18e6cc
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/h8.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+#include "wsp.h"
+
+/*
+ * The UART connection to the H8 is over ttyS1 which is just a 16550.
+ * We assume that FW has it setup right and no one messes with it.
+ */
+
+
+static u8 __iomem *h8;
+
+#define RBR 0 /* Receiver Buffer Register */
+#define THR 0 /* Transmitter Holding Register */
+#define LSR 5 /* Line Status Register */
+#define LSR_DR 0x01 /* LSR value for Data-Ready */
+#define LSR_THRE 0x20 /* LSR value for Transmitter-Holding-Register-Empty */
+static void wsp_h8_putc(int c)
+{
+ u8 lsr;
+
+ do {
+ lsr = readb(h8 + LSR);
+ } while ((lsr & LSR_THRE) != LSR_THRE);
+ writeb(c, h8 + THR);
+}
+
+static int wsp_h8_getc(void)
+{
+ u8 lsr;
+
+ do {
+ lsr = readb(h8 + LSR);
+ } while ((lsr & LSR_DR) != LSR_DR);
+
+ return readb(h8 + RBR);
+}
+
+static void wsp_h8_puts(const char *s, int sz)
+{
+ int i;
+
+ for (i = 0; i < sz; i++) {
+ wsp_h8_putc(s[i]);
+
+ /* no flow control so wait for echo */
+ wsp_h8_getc();
+ }
+ wsp_h8_putc('\r');
+ wsp_h8_putc('\n');
+}
+
+static void wsp_h8_terminal_cmd(const char *cmd, int sz)
+{
+ hard_irq_disable();
+ wsp_h8_puts(cmd, sz);
+ /* should never return, but just in case */
+ for (;;)
+ continue;
+}
+
+
+void wsp_h8_restart(char *cmd)
+{
+ static const char restart[] = "warm-reset";
+
+ (void)cmd;
+ wsp_h8_terminal_cmd(restart, sizeof(restart) - 1);
+}
+
+void wsp_h8_power_off(void)
+{
+ static const char off[] = "power-off";
+
+ wsp_h8_terminal_cmd(off, sizeof(off) - 1);
+}
+
+static void __iomem *wsp_h8_getaddr(void)
+{
+ struct device_node *aliases;
+ struct device_node *uart;
+ struct property *path;
+ void __iomem *va = NULL;
+
+ /*
+ * there is nothing in the devtree to tell us which is mapped
+ * to the H8, but se know it is the second serial port.
+ */
+
+ aliases = of_find_node_by_path("/aliases");
+ if (aliases == NULL)
+ return NULL;
+
+ path = of_find_property(aliases, "serial1", NULL);
+ if (path == NULL)
+ goto out;
+
+ uart = of_find_node_by_path(path->value);
+ if (uart == NULL)
+ goto out;
+
+ va = of_iomap(uart, 0);
+
+ /* remove it so no one messes with it */
+ of_detach_node(uart);
+ of_node_put(uart);
+
+out:
+ of_node_put(aliases);
+
+ return va;
+}
+
+void __init wsp_setup_h8(void)
+{
+ h8 = wsp_h8_getaddr();
+
+ /* Devtree change? lets hard map it anyway */
+ if (h8 == NULL) {
+ pr_warn("UART to H8 could not be found");
+ h8 = ioremap(0xffc0008000ULL, 0x100);
+ }
+}
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
index be05631..19f353d 100644
--- a/arch/powerpc/platforms/wsp/opb_pic.c
+++ b/arch/powerpc/platforms/wsp/opb_pic.c
@@ -320,7 +320,8 @@
}
/* Attach opb interrupt handler to new virtual IRQ */
- rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
+ rc = request_irq(virq, opb_irq_handler, IRQF_NO_THREAD,
+ "OPB LS Cascade", opb);
if (rc) {
printk("opb: request_irq failed: %d\n", rc);
continue;
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
index 166f2e4..0c1ae06 100644
--- a/arch/powerpc/platforms/wsp/psr2.c
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -14,10 +14,10 @@
#include <linux/mm.h>
#include <linux/of.h>
#include <linux/smp.h>
+#include <linux/time.h>
#include <asm/machdep.h>
#include <asm/system.h>
-#include <asm/time.h>
#include <asm/udbg.h>
#include "ics.h"
@@ -27,7 +27,8 @@
static void psr2_spin(void)
{
hard_irq_disable();
- for (;;) ;
+ for (;;)
+ continue;
}
static void psr2_restart(char *cmd)
@@ -35,65 +36,32 @@
psr2_spin();
}
-static int psr2_probe_devices(void)
-{
- struct device_node *np;
-
- /* Our RTC is a ds1500. It seems to be programatically compatible
- * with the ds1511 for which we have a driver so let's use that
- */
- np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
- if (np != NULL) {
- struct resource res;
- if (of_address_to_resource(np, 0, &res) == 0)
- platform_device_register_simple("ds1511", 0, &res, 1);
- }
- return 0;
-}
-machine_arch_initcall(psr2_md, psr2_probe_devices);
-
-static void __init psr2_setup_arch(void)
-{
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000;
-
- scom_init_wsp();
-
- /* Setup SMP callback */
-#ifdef CONFIG_SMP
- a2_setup_smp();
-#endif
-#ifdef CONFIG_PCI
- wsp_setup_pci();
-#endif
-
-}
-
static int __init psr2_probe(void)
{
unsigned long root = of_get_flat_dt_root();
+ if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) {
+ /* chroma systems also claim they are psr2s */
+ return 0;
+ }
+
if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
return 0;
return 1;
}
-static void __init psr2_init_irq(void)
-{
- wsp_init_irq();
- opb_pic_init();
-}
-
define_machine(psr2_md) {
.name = "PSR2 A2",
.probe = psr2_probe,
- .setup_arch = psr2_setup_arch,
+ .setup_arch = wsp_setup_arch,
.restart = psr2_restart,
.power_off = psr2_spin,
.halt = psr2_spin,
.calibrate_decr = generic_calibrate_decr,
- .init_IRQ = psr2_init_irq,
+ .init_IRQ = wsp_setup_irq,
.progress = udbg_progress,
.power_save = book3e_idle,
};
+
+machine_arch_initcall(psr2_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
new file mode 100644
index 0000000..d25cc96
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+
+#include <asm/scom.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+#define WSP_SOC_COMPATIBLE "ibm,wsp-soc"
+#define PBIC_COMPATIBLE "ibm,wsp-pbic"
+#define COPRO_COMPATIBLE "ibm,wsp-coprocessor"
+
+static int __init wsp_probe_buses(void)
+{
+ static __initdata struct of_device_id bus_ids[] = {
+ /*
+ * every node in between needs to be here or you won't
+ * find it
+ */
+ { .compatible = WSP_SOC_COMPATIBLE, },
+ { .compatible = PBIC_COMPATIBLE, },
+ { .compatible = COPRO_COMPATIBLE, },
+ {},
+ };
+ of_platform_bus_probe(NULL, bus_ids, NULL);
+
+ return 0;
+}
+
+void __init wsp_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ scom_init_wsp();
+
+ /* Setup SMP callback */
+#ifdef CONFIG_SMP
+ a2_setup_smp();
+#endif
+#ifdef CONFIG_PCI
+ wsp_setup_pci();
+#endif
+}
+
+void __init wsp_setup_irq(void)
+{
+ wsp_init_irq();
+ opb_pic_init();
+}
+
+
+int __init wsp_probe_devices(void)
+{
+ struct device_node *np;
+
+ /* Our RTC is a ds1500. It seems to be programatically compatible
+ * with the ds1511 for which we have a driver so let's use that
+ */
+ np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+ if (np != NULL) {
+ struct resource res;
+ if (of_address_to_resource(np, 0, &res) == 0)
+ platform_device_register_simple("ds1511", 0, &res, 1);
+ }
+
+ wsp_probe_buses();
+
+ return 0;
+}
+
+void wsp_halt(void)
+{
+ u64 val;
+ scom_map_t m;
+ struct device_node *dn;
+ struct device_node *mine;
+ struct device_node *me;
+
+ me = of_get_cpu_node(smp_processor_id(), NULL);
+ mine = scom_find_parent(me);
+
+ /* This will halt all the A2s but not power off the chip */
+ for_each_node_with_property(dn, "scom-controller") {
+ if (dn == mine)
+ continue;
+ m = scom_map(dn, 0, 1);
+
+ /* read-modify-write it so the HW probe does not get
+ * confused */
+ val = scom_read(m, 0);
+ val |= 1;
+ scom_write(m, 0, val);
+ scom_unmap(m);
+ }
+ m = scom_map(mine, 0, 1);
+ val = scom_read(m, 0);
+ val |= 1;
+ scom_write(m, 0, val);
+ /* should never return */
+ scom_unmap(m);
+}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
index 3347981..10c1d1f 100644
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -6,15 +6,25 @@
/* Devtree compatible strings for major devices */
#define PCIE_COMPATIBLE "ibm,wsp-pciex"
+extern void wsp_setup_arch(void);
+extern void wsp_setup_irq(void);
+extern int wsp_probe_devices(void);
+extern void wsp_halt(void);
+
extern void wsp_setup_pci(void);
extern void scom_init_wsp(void);
extern void a2_setup_smp(void);
extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
struct device_node *np);
-int smp_a2_cpu_bootable(unsigned int nr);
-int __devinit smp_a2_kick_cpu(int nr);
+extern int smp_a2_cpu_bootable(unsigned int nr);
+extern int __devinit smp_a2_kick_cpu(int nr);
-void opb_pic_init(void);
+extern void opb_pic_init(void);
+
+/* chroma specific managment */
+extern void wsp_h8_restart(char *cmd);
+extern void wsp_h8_power_off(void);
+extern void __init wsp_setup_h8(void);
#endif /* __WSP_H */
diff --git a/arch/powerpc/relocs_check.pl b/arch/powerpc/relocs_check.pl
index d257109..7f5b838 100755
--- a/arch/powerpc/relocs_check.pl
+++ b/arch/powerpc/relocs_check.pl
@@ -32,8 +32,18 @@
next if (!/\s+R_/);
# These relocations are okay
- next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or
- /R_PPC64_ADDR64\s+mach_/);
+ # On PPC64:
+ # R_PPC64_RELATIVE, R_PPC64_NONE, R_PPC64_ADDR64
+ # On PPC:
+ # R_PPC_RELATIVE, R_PPC_ADDR16_HI,
+ # R_PPC_ADDR16_HA,R_PPC_ADDR16_LO,
+ # R_PPC_NONE
+
+ next if (/\bR_PPC64_RELATIVE\b/ or /\bR_PPC64_NONE\b/ or
+ /\bR_PPC64_ADDR64\s+mach_/);
+ next if (/\bR_PPC_ADDR16_LO\b/ or /\bR_PPC_ADDR16_HI\b/ or
+ /\bR_PPC_ADDR16_HA\b/ or /\bR_PPC_RELATIVE\b/ or
+ /\bR_PPC_NONE\b/);
# If we see this type of relcoation it's an idication that
# we /may/ be using an old version of binutils.
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 84e1325..5e37b47 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -17,10 +17,11 @@
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
+obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
-obj-$(CONFIG_FSL_RIO) += fsl_rio.o
+obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index ba42719..1c16141 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -25,7 +25,6 @@
#include <linux/bio.h>
#include <linux/blkdev.h>
-#include <linux/buffer_head.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/fs.h>
diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c
new file mode 100644
index 0000000..b31f19f
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_ifc.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc
+ *
+ * Freescale Integrated Flash Controller
+ *
+ * Author: Dipen Dudhat <Dipen.Dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/fsl_ifc.h>
+
+struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+EXPORT_SYMBOL(fsl_ifc_ctrl_dev);
+
+/*
+ * convert_ifc_address - convert the base address
+ * @addr_base: base address of the memory bank
+ */
+unsigned int convert_ifc_address(phys_addr_t addr_base)
+{
+ return addr_base & CSPR_BA;
+}
+EXPORT_SYMBOL(convert_ifc_address);
+
+/*
+ * fsl_ifc_find - find IFC bank
+ * @addr_base: base address of the memory bank
+ *
+ * This function walks IFC banks comparing "Base address" field of the CSPR
+ * registers with the supplied addr_base argument. When bases match this
+ * function returns bank number (starting with 0), otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_ifc_find(phys_addr_t addr_base)
+{
+ int i = 0;
+
+ if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(fsl_ifc_ctrl_dev->regs->cspr_cs); i++) {
+ __be32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr);
+ if (cspr & CSPR_V && (cspr & CSPR_BA) ==
+ convert_ifc_address(addr_base))
+ return i;
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL(fsl_ifc_find);
+
+static int __devinit fsl_ifc_ctrl_init(struct fsl_ifc_ctrl *ctrl)
+{
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+ /*
+ * Clear all the common status and event registers
+ */
+ if (in_be32(&ifc->cm_evter_stat) & IFC_CM_EVTER_STAT_CSER)
+ out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER);
+
+ /* enable all error and events */
+ out_be32(&ifc->cm_evter_en, IFC_CM_EVTER_EN_CSEREN);
+
+ /* enable all error and event interrupts */
+ out_be32(&ifc->cm_evter_intr_en, IFC_CM_EVTER_INTR_EN_CSERIREN);
+ out_be32(&ifc->cm_erattr0, 0x0);
+ out_be32(&ifc->cm_erattr1, 0x0);
+
+ return 0;
+}
+
+static int fsl_ifc_ctrl_remove(struct platform_device *dev)
+{
+ struct fsl_ifc_ctrl *ctrl = dev_get_drvdata(&dev->dev);
+
+ free_irq(ctrl->nand_irq, ctrl);
+ free_irq(ctrl->irq, ctrl);
+
+ irq_dispose_mapping(ctrl->nand_irq);
+ irq_dispose_mapping(ctrl->irq);
+
+ iounmap(ctrl->regs);
+
+ dev_set_drvdata(&dev->dev, NULL);
+ kfree(ctrl);
+
+ return 0;
+}
+
+/*
+ * NAND events are split between an operational interrupt which only
+ * receives OPC, and an error interrupt that receives everything else,
+ * including non-NAND errors. Whichever interrupt gets to it first
+ * records the status and wakes the wait queue.
+ */
+static DEFINE_SPINLOCK(nand_irq_lock);
+
+static u32 check_nand_stat(struct fsl_ifc_ctrl *ctrl)
+{
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ unsigned long flags;
+ u32 stat;
+
+ spin_lock_irqsave(&nand_irq_lock, flags);
+
+ stat = in_be32(&ifc->ifc_nand.nand_evter_stat);
+ if (stat) {
+ out_be32(&ifc->ifc_nand.nand_evter_stat, stat);
+ ctrl->nand_stat = stat;
+ wake_up(&ctrl->nand_wait);
+ }
+
+ spin_unlock_irqrestore(&nand_irq_lock, flags);
+
+ return stat;
+}
+
+static irqreturn_t fsl_ifc_nand_irq(int irqno, void *data)
+{
+ struct fsl_ifc_ctrl *ctrl = data;
+
+ if (check_nand_stat(ctrl))
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
+}
+
+/*
+ * NOTE: This interrupt is used to report ifc events of various kinds,
+ * such as transaction errors on the chipselects.
+ */
+static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
+{
+ struct fsl_ifc_ctrl *ctrl = data;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ u32 err_axiid, err_srcid, status, cs_err, err_addr;
+ irqreturn_t ret = IRQ_NONE;
+
+ /* read for chip select error */
+ cs_err = in_be32(&ifc->cm_evter_stat);
+ if (cs_err) {
+ dev_err(ctrl->dev, "transaction sent to IFC is not mapped to"
+ "any memory bank 0x%08X\n", cs_err);
+ /* clear the chip select error */
+ out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER);
+
+ /* read error attribute registers print the error information */
+ status = in_be32(&ifc->cm_erattr0);
+ err_addr = in_be32(&ifc->cm_erattr1);
+
+ if (status & IFC_CM_ERATTR0_ERTYP_READ)
+ dev_err(ctrl->dev, "Read transaction error"
+ "CM_ERATTR0 0x%08X\n", status);
+ else
+ dev_err(ctrl->dev, "Write transaction error"
+ "CM_ERATTR0 0x%08X\n", status);
+
+ err_axiid = (status & IFC_CM_ERATTR0_ERAID) >>
+ IFC_CM_ERATTR0_ERAID_SHIFT;
+ dev_err(ctrl->dev, "AXI ID of the error"
+ "transaction 0x%08X\n", err_axiid);
+
+ err_srcid = (status & IFC_CM_ERATTR0_ESRCID) >>
+ IFC_CM_ERATTR0_ESRCID_SHIFT;
+ dev_err(ctrl->dev, "SRC ID of the error"
+ "transaction 0x%08X\n", err_srcid);
+
+ dev_err(ctrl->dev, "Transaction Address corresponding to error"
+ "ERADDR 0x%08X\n", err_addr);
+
+ ret = IRQ_HANDLED;
+ }
+
+ if (check_nand_stat(ctrl))
+ ret = IRQ_HANDLED;
+
+ return ret;
+}
+
+/*
+ * fsl_ifc_ctrl_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code allocates all of
+ * the resources needed for the controller only. The
+ * resources for the NAND banks themselves are allocated
+ * in the chip probe function.
+*/
+static int __devinit fsl_ifc_ctrl_probe(struct platform_device *dev)
+{
+ int ret = 0;
+
+
+ dev_info(&dev->dev, "Freescale Integrated Flash Controller\n");
+
+ fsl_ifc_ctrl_dev = kzalloc(sizeof(*fsl_ifc_ctrl_dev), GFP_KERNEL);
+ if (!fsl_ifc_ctrl_dev)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dev->dev, fsl_ifc_ctrl_dev);
+
+ /* IOMAP the entire IFC region */
+ fsl_ifc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
+ if (!fsl_ifc_ctrl_dev->regs) {
+ dev_err(&dev->dev, "failed to get memory region\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* get the Controller level irq */
+ fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+ if (fsl_ifc_ctrl_dev->irq == NO_IRQ) {
+ dev_err(&dev->dev, "failed to get irq resource "
+ "for IFC\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* get the nand machine irq */
+ fsl_ifc_ctrl_dev->nand_irq =
+ irq_of_parse_and_map(dev->dev.of_node, 1);
+ if (fsl_ifc_ctrl_dev->nand_irq == NO_IRQ) {
+ dev_err(&dev->dev, "failed to get irq resource "
+ "for NAND Machine\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ fsl_ifc_ctrl_dev->dev = &dev->dev;
+
+ ret = fsl_ifc_ctrl_init(fsl_ifc_ctrl_dev);
+ if (ret < 0)
+ goto err;
+
+ init_waitqueue_head(&fsl_ifc_ctrl_dev->nand_wait);
+
+ ret = request_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_irq, IRQF_SHARED,
+ "fsl-ifc", fsl_ifc_ctrl_dev);
+ if (ret != 0) {
+ dev_err(&dev->dev, "failed to install irq (%d)\n",
+ fsl_ifc_ctrl_dev->irq);
+ goto err_irq;
+ }
+
+ ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq, 0,
+ "fsl-ifc-nand", fsl_ifc_ctrl_dev);
+ if (ret != 0) {
+ dev_err(&dev->dev, "failed to install irq (%d)\n",
+ fsl_ifc_ctrl_dev->nand_irq);
+ goto err_nandirq;
+ }
+
+ return 0;
+
+err_nandirq:
+ free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev);
+ irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq);
+err_irq:
+ free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
+ irq_dispose_mapping(fsl_ifc_ctrl_dev->irq);
+err:
+ return ret;
+}
+
+static const struct of_device_id fsl_ifc_match[] = {
+ {
+ .compatible = "fsl,ifc",
+ },
+ {},
+};
+
+static struct platform_driver fsl_ifc_ctrl_driver = {
+ .driver = {
+ .name = "fsl-ifc",
+ .of_match_table = fsl_ifc_match,
+ },
+ .probe = fsl_ifc_ctrl_probe,
+ .remove = fsl_ifc_ctrl_remove,
+};
+
+module_platform_driver(fsl_ifc_ctrl_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("Freescale Integrated Flash Controller driver");
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index d5c3c90..483126d 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -332,6 +332,38 @@
return ret;
}
+#ifdef CONFIG_SUSPEND
+
+/* save lbc registers */
+static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL);
+ if (!ctrl->saved_regs)
+ return -ENOMEM;
+
+ _memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs));
+ return 0;
+}
+
+/* restore lbc registers */
+static int fsl_lbc_resume(struct platform_device *pdev)
+{
+ struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ if (ctrl->saved_regs) {
+ _memcpy_toio(lbc, ctrl->saved_regs,
+ sizeof(struct fsl_lbc_regs));
+ kfree(ctrl->saved_regs);
+ ctrl->saved_regs = NULL;
+ }
+ return 0;
+}
+#endif /* CONFIG_SUSPEND */
+
static const struct of_device_id fsl_lbc_match[] = {
{ .compatible = "fsl,elbc", },
{ .compatible = "fsl,pq3-localbus", },
@@ -346,6 +378,10 @@
.of_match_table = fsl_lbc_match,
},
.probe = fsl_lbc_ctrl_probe,
+#ifdef CONFIG_SUSPEND
+ .suspend = fsl_lbc_suspend,
+ .resume = fsl_lbc_resume,
+#endif
};
static int __init fsl_lbc_init(void)
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index e5c344d..ecb5c19 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -23,6 +23,8 @@
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
#include <asm/mpic.h>
+#include <asm/fsl_hcalls.h>
+
#include "fsl_msi.h"
#include "fsl_pci.h"
@@ -148,14 +150,49 @@
static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct device_node *np;
+ phandle phandle = 0;
int rc, hwirq = -ENOMEM;
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
struct fsl_msi *msi_data;
+ /*
+ * If the PCI node has an fsl,msi property, then we need to use it
+ * to find the specific MSI.
+ */
+ np = of_parse_phandle(hose->dn, "fsl,msi", 0);
+ if (np) {
+ if (of_device_is_compatible(np, "fsl,mpic-msi") ||
+ of_device_is_compatible(np, "fsl,vmpic-msi"))
+ phandle = np->phandle;
+ else {
+ dev_err(&pdev->dev,
+ "node %s has an invalid fsl,msi phandle %u\n",
+ hose->dn->full_name, np->phandle);
+ return -EINVAL;
+ }
+ }
+
list_for_each_entry(entry, &pdev->msi_list, list) {
+ /*
+ * Loop over all the MSI devices until we find one that has an
+ * available interrupt.
+ */
list_for_each_entry(msi_data, &msi_head, list) {
+ /*
+ * If the PCI node has an fsl,msi property, then we
+ * restrict our search to the corresponding MSI node.
+ * The simplest way is to skip over MSI nodes with the
+ * wrong phandle. Under the Freescale hypervisor, this
+ * has the additional benefit of skipping over MSI
+ * nodes that are not mapped in the PAMU.
+ */
+ if (phandle && (phandle != msi_data->phandle))
+ continue;
+
hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
if (hwirq >= 0)
break;
@@ -163,16 +200,14 @@
if (hwirq < 0) {
rc = hwirq;
- pr_debug("%s: fail allocating msi interrupt\n",
- __func__);
+ dev_err(&pdev->dev, "could not allocate MSI interrupt\n");
goto out_free;
}
virq = irq_create_mapping(msi_data->irqhost, hwirq);
if (virq == NO_IRQ) {
- pr_debug("%s: fail mapping hwirq 0x%x\n",
- __func__, hwirq);
+ dev_err(&pdev->dev, "fail mapping hwirq %i\n", hwirq);
msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1);
rc = -ENOSPC;
goto out_free;
@@ -201,6 +236,7 @@
u32 intr_index;
u32 have_shift = 0;
struct fsl_msi_cascade_data *cascade_data;
+ unsigned int ret;
cascade_data = irq_get_handler_data(irq);
msi_data = cascade_data->msi_data;
@@ -232,6 +268,14 @@
case FSL_PIC_IP_IPIC:
msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x4);
break;
+ case FSL_PIC_IP_VMPIC:
+ ret = fh_vmpic_get_msir(virq_to_hw(irq), &msir_value);
+ if (ret) {
+ pr_err("fsl-msi: fh_vmpic_get_msir() failed for "
+ "irq %u (ret=%u)\n", irq, ret);
+ msir_value = 0;
+ }
+ break;
}
while (msir_value) {
@@ -249,6 +293,7 @@
switch (msi_data->feature & FSL_PIC_IP_MASK) {
case FSL_PIC_IP_MPIC:
+ case FSL_PIC_IP_VMPIC:
chip->irq_eoi(idata);
break;
case FSL_PIC_IP_IPIC:
@@ -278,7 +323,8 @@
}
if (msi->bitmap.bitmap)
msi_bitmap_free(&msi->bitmap);
- iounmap(msi->msi_regs);
+ if ((msi->feature & FSL_PIC_IP_MASK) != FSL_PIC_IP_VMPIC)
+ iounmap(msi->msi_regs);
kfree(msi);
return 0;
@@ -350,25 +396,37 @@
goto error_out;
}
- /* Get the MSI reg base */
- err = of_address_to_resource(dev->dev.of_node, 0, &res);
- if (err) {
- dev_err(&dev->dev, "%s resource error!\n",
+ /*
+ * Under the Freescale hypervisor, the msi nodes don't have a 'reg'
+ * property. Instead, we use hypercalls to access the MSI.
+ */
+ if ((features->fsl_pic_ip & FSL_PIC_IP_MASK) != FSL_PIC_IP_VMPIC) {
+ err = of_address_to_resource(dev->dev.of_node, 0, &res);
+ if (err) {
+ dev_err(&dev->dev, "invalid resource for node %s\n",
dev->dev.of_node->full_name);
- goto error_out;
- }
+ goto error_out;
+ }
- msi->msi_regs = ioremap(res.start, resource_size(&res));
- if (!msi->msi_regs) {
- dev_err(&dev->dev, "ioremap problem failed\n");
- goto error_out;
+ msi->msi_regs = ioremap(res.start, resource_size(&res));
+ if (!msi->msi_regs) {
+ dev_err(&dev->dev, "could not map node %s\n",
+ dev->dev.of_node->full_name);
+ goto error_out;
+ }
+ msi->msiir_offset =
+ features->msiir_offset + (res.start & 0xfffff);
}
msi->feature = features->fsl_pic_ip;
msi->irqhost->host_data = msi;
- msi->msiir_offset = features->msiir_offset + (res.start & 0xfffff);
+ /*
+ * Remember the phandle, so that we can match with any PCI nodes
+ * that have an "fsl,msi" property.
+ */
+ msi->phandle = dev->dev.of_node->phandle;
rc = fsl_msi_init_allocator(msi);
if (rc) {
@@ -437,6 +495,11 @@
.msiir_offset = 0x38,
};
+static const struct fsl_msi_feature vmpic_msi_feature = {
+ .fsl_pic_ip = FSL_PIC_IP_VMPIC,
+ .msiir_offset = 0,
+};
+
static const struct of_device_id fsl_of_msi_ids[] = {
{
.compatible = "fsl,mpic-msi",
@@ -446,6 +509,10 @@
.compatible = "fsl,ipic-msi",
.data = (void *)&ipic_msi_feature,
},
+ {
+ .compatible = "fsl,vmpic-msi",
+ .data = (void *)&vmpic_msi_feature,
+ },
{}
};
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 1313abb..f6c646a 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -13,15 +13,17 @@
#ifndef _POWERPC_SYSDEV_FSL_MSI_H
#define _POWERPC_SYSDEV_FSL_MSI_H
+#include <linux/of.h>
#include <asm/msi_bitmap.h>
#define NR_MSI_REG 8
#define IRQS_PER_MSI_REG 32
#define NR_MSI_IRQS (NR_MSI_REG * IRQS_PER_MSI_REG)
-#define FSL_PIC_IP_MASK 0x0000000F
-#define FSL_PIC_IP_MPIC 0x00000001
-#define FSL_PIC_IP_IPIC 0x00000002
+#define FSL_PIC_IP_MASK 0x0000000F
+#define FSL_PIC_IP_MPIC 0x00000001
+#define FSL_PIC_IP_IPIC 0x00000002
+#define FSL_PIC_IP_VMPIC 0x00000003
struct fsl_msi {
struct irq_host *irqhost;
@@ -36,6 +38,8 @@
struct msi_bitmap bitmap;
struct list_head list; /* support multiple MSI banks */
+
+ phandle phandle;
};
#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4ce547e..3b61e8c 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -65,6 +65,30 @@
}
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
+
+#define MAX_PHYS_ADDR_BITS 40
+static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS;
+
+static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+ return -EIO;
+
+ /*
+ * Fixup PCI devices that are able to DMA to above the physical
+ * address width of the SoC such that we can address any internal
+ * SoC address from across PCI if needed
+ */
+ if ((dev->bus == &pci_bus_type) &&
+ dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) {
+ set_dma_ops(dev, &dma_direct_ops);
+ set_dma_offset(dev, pci64_dma_offset);
+ }
+
+ *dev->dma_mask = dma_mask;
+ return 0;
+}
+
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
@@ -113,6 +137,8 @@
u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
char *name = hose->dn->full_name;
+ const u64 *reg;
+ int len;
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
(u64)rsrc->start, (u64)resource_size(rsrc));
@@ -205,6 +231,33 @@
/* Setup inbound mem window */
mem = memblock_end_of_DRAM();
+
+ /*
+ * The msi-address-64 property, if it exists, indicates the physical
+ * address of the MSIIR register. Normally, this register is located
+ * inside CCSR, so the ATMU that covers all of CCSR is used. But if
+ * this property exists, then we normally need to create a new ATMU
+ * for it. For now, however, we cheat. The only entity that creates
+ * this property is the Freescale hypervisor, and the address is
+ * specified in the partition configuration. Typically, the address
+ * is located in the page immediately after the end of DDR. If so, we
+ * can avoid allocating a new ATMU by extending the DDR ATMU by one
+ * page.
+ */
+ reg = of_get_property(hose->dn, "msi-address-64", &len);
+ if (reg && (len == sizeof(u64))) {
+ u64 address = be64_to_cpup(reg);
+
+ if ((address >= mem) && (address < (mem + PAGE_SIZE))) {
+ pr_info("%s: extending DDR ATMU to cover MSIIR", name);
+ mem += PAGE_SIZE;
+ } else {
+ /* TODO: Create a new ATMU for MSIIR */
+ pr_warn("%s: msi-address-64 address of %llx is "
+ "unsupported\n", name, address);
+ }
+ }
+
sz = min(mem, paddr_lo);
mem_log = __ilog2_u64(sz);
@@ -228,6 +281,37 @@
hose->dma_window_base_cur = 0x00000000;
hose->dma_window_size = (resource_size_t)sz;
+
+ /*
+ * if we have >4G of memory setup second PCI inbound window to
+ * let devices that are 64-bit address capable to work w/o
+ * SWIOTLB and access the full range of memory
+ */
+ if (sz != mem) {
+ mem_log = __ilog2_u64(mem);
+
+ /* Size window up if we dont fit in exact power-of-2 */
+ if ((1ull << mem_log) != mem)
+ mem_log++;
+
+ piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
+
+ /* Setup inbound memory window */
+ out_be32(&pci->piw[win_idx].pitar, 0x00000000);
+ out_be32(&pci->piw[win_idx].piwbear,
+ pci64_dma_offset >> 44);
+ out_be32(&pci->piw[win_idx].piwbar,
+ pci64_dma_offset >> 12);
+ out_be32(&pci->piw[win_idx].piwar, piwar);
+
+ /*
+ * install our own dma_set_mask handler to fixup dma_ops
+ * and dma_offset
+ */
+ ppc_md.dma_set_mask = fsl_pci_dma_set_mask;
+
+ pr_info("%s: Setup 64-bit PCI DMA window\n", name);
+ }
} else {
u64 paddr = 0;
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 22ffccd..a4c4f4a 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -10,7 +10,7 @@
* - Added Port-Write message handling
* - Added Machine Check exception handling
*
- * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
* Zhang Wei <wei.zhang@freescale.com>
*
* Copyright 2005 MontaVista Software, Inc.
@@ -28,240 +28,33 @@
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include <linux/rio.h>
-#include <linux/rio_drv.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/kfifo.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include <asm/machdep.h>
-#include <asm/uaccess.h>
+
+#include "fsl_rio.h"
#undef DEBUG_PW /* Port-Write debugging */
-/* RapidIO definition irq, which read from OF-tree */
-#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq)
-#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
-#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
-#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
-
-#define IPWSR_CLEAR 0x98
-#define OMSR_CLEAR 0x1cb3
-#define IMSR_CLEAR 0x491
-#define IDSR_CLEAR 0x91
-#define ODSR_CLEAR 0x1c00
-#define LTLEECSR_ENABLE_ALL 0xFFC000FC
-#define ESCSR_CLEAR 0x07120204
-#define IECSR_CLEAR 0x80000000
-
#define RIO_PORT1_EDCSR 0x0640
#define RIO_PORT2_EDCSR 0x0680
#define RIO_PORT1_IECSR 0x10130
#define RIO_PORT2_IECSR 0x101B0
-#define RIO_IM0SR 0x13064
-#define RIO_IM1SR 0x13164
-#define RIO_OM0SR 0x13004
-#define RIO_OM1SR 0x13104
-#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_P_MSG_REGS_OFFSET 0x11000
-#define RIO_S_MSG_REGS_OFFSET 0x13000
#define RIO_GCCSR 0x13c
#define RIO_ESCSR 0x158
+#define ESCSR_CLEAR 0x07120204
#define RIO_PORT2_ESCSR 0x178
#define RIO_CCSR 0x15c
-#define RIO_LTLEDCSR 0x0608
#define RIO_LTLEDCSR_IER 0x80000000
#define RIO_LTLEDCSR_PRT 0x01000000
-#define RIO_LTLEECSR 0x060c
-#define RIO_EPWISR 0x10010
+#define IECSR_CLEAR 0x80000000
#define RIO_ISR_AACR 0x10120
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
-#define RIO_MAINT_WIN_SIZE 0x400000
-#define RIO_DBELL_WIN_SIZE 0x1000
-
-#define RIO_MSG_OMR_MUI 0x00000002
-#define RIO_MSG_OSR_TE 0x00000080
-#define RIO_MSG_OSR_QOI 0x00000020
-#define RIO_MSG_OSR_QFI 0x00000010
-#define RIO_MSG_OSR_MUB 0x00000004
-#define RIO_MSG_OSR_EOMI 0x00000002
-#define RIO_MSG_OSR_QEI 0x00000001
-
-#define RIO_MSG_IMR_MI 0x00000002
-#define RIO_MSG_ISR_TE 0x00000080
-#define RIO_MSG_ISR_QFI 0x00000010
-#define RIO_MSG_ISR_DIQI 0x00000001
-
-#define RIO_IPWMR_SEN 0x00100000
-#define RIO_IPWMR_QFIE 0x00000100
-#define RIO_IPWMR_EIE 0x00000020
-#define RIO_IPWMR_CQ 0x00000002
-#define RIO_IPWMR_PWE 0x00000001
-
-#define RIO_IPWSR_QF 0x00100000
-#define RIO_IPWSR_TE 0x00000080
-#define RIO_IPWSR_QFI 0x00000010
-#define RIO_IPWSR_PWD 0x00000008
-#define RIO_IPWSR_PWB 0x00000004
-
-/* EPWISR Error match value */
-#define RIO_EPWISR_PINT1 0x80000000
-#define RIO_EPWISR_PINT2 0x40000000
-#define RIO_EPWISR_MU 0x00000002
-#define RIO_EPWISR_PW 0x00000001
-
-#define RIO_MSG_DESC_SIZE 32
-#define RIO_MSG_BUFFER_SIZE 4096
-#define RIO_MIN_TX_RING_SIZE 2
-#define RIO_MAX_TX_RING_SIZE 2048
-#define RIO_MIN_RX_RING_SIZE 2
-#define RIO_MAX_RX_RING_SIZE 2048
-
-#define DOORBELL_DMR_DI 0x00000002
-#define DOORBELL_DSR_TE 0x00000080
-#define DOORBELL_DSR_QFI 0x00000010
-#define DOORBELL_DSR_DIQI 0x00000001
-#define DOORBELL_TID_OFFSET 0x02
-#define DOORBELL_SID_OFFSET 0x04
-#define DOORBELL_INFO_OFFSET 0x06
-
-#define DOORBELL_MESSAGE_SIZE 0x08
-#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
-#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
-
-struct rio_atmu_regs {
- u32 rowtar;
- u32 rowtear;
- u32 rowbar;
- u32 pad2;
- u32 rowar;
- u32 pad3[3];
-};
-
-struct rio_msg_regs {
- u32 omr; /* 0xD_3000 - Outbound message 0 mode register */
- u32 osr; /* 0xD_3004 - Outbound message 0 status register */
- u32 pad1;
- u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue
- dequeue pointer address register */
- u32 pad2;
- u32 osar; /* 0xD_3014 - Outbound message 0 source address
- register */
- u32 odpr; /* 0xD_3018 - Outbound message 0 destination port
- register */
- u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes
- Register*/
- u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count
- register */
- u32 pad3;
- u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue
- enqueue pointer address register */
- u32 pad4[13];
- u32 imr; /* 0xD_3060 - Inbound message 0 mode register */
- u32 isr; /* 0xD_3064 - Inbound message 0 status register */
- u32 pad5;
- u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue
- pointer address register*/
- u32 pad6;
- u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue
- pointer address register */
- u32 pad7[226];
- u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */
- u32 odsr; /* 0xD_3404 - Outbound doorbell status register */
- u32 res0[4];
- u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port
- register */
- u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes
- register */
- u32 res1[3];
- u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold
- configuration register */
- u32 res2[12];
- u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */
- u32 dsr; /* 0xD_3464 - Inbound doorbell status register */
- u32 pad8;
- u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer
- address register */
- u32 pad9;
- u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer
- address register */
- u32 pad10[26];
- u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */
- u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */
- u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address
- register */
- u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address
- register */
-};
-
-struct rio_tx_desc {
- u32 res1;
- u32 saddr;
- u32 dport;
- u32 dattr;
- u32 res2;
- u32 res3;
- u32 dwcnt;
- u32 res4;
-};
-
-struct rio_dbell_ring {
- void *virt;
- dma_addr_t phys;
-};
-
-struct rio_msg_tx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_TX_RING_SIZE];
- dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
- int tx_slot;
- int size;
- void *dev_id;
-};
-
-struct rio_msg_rx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_RX_RING_SIZE];
- int rx_slot;
- int size;
- void *dev_id;
-};
-
-struct rio_port_write_msg {
- void *virt;
- dma_addr_t phys;
- u32 msg_count;
- u32 err_count;
- u32 discard_count;
-};
-
-struct rio_priv {
- struct device *dev;
- void __iomem *regs_win;
- struct rio_atmu_regs __iomem *atmu_regs;
- struct rio_atmu_regs __iomem *maint_atmu_regs;
- struct rio_atmu_regs __iomem *dbell_atmu_regs;
- void __iomem *dbell_win;
- void __iomem *maint_win;
- struct rio_msg_regs __iomem *msg_regs;
- struct rio_dbell_ring dbell_ring;
- struct rio_msg_tx_ring msg_tx_ring;
- struct rio_msg_rx_ring msg_rx_ring;
- struct rio_port_write_msg port_write_msg;
- int bellirq;
- int txirq;
- int rxirq;
- int pwirq;
- struct work_struct pw_work;
- struct kfifo pw_fifo;
- spinlock_t pw_fifo_lock;
-};
#define __fsl_read_rio_config(x, addr, err, op) \
__asm__ __volatile__( \
@@ -279,7 +72,12 @@
: "=r" (err), "=r" (x) \
: "b" (addr), "i" (-EFAULT), "0" (err))
-static void __iomem *rio_regs_win;
+void __iomem *rio_regs_win;
+void __iomem *rmu_regs_win;
+resource_size_t rio_law_start;
+
+struct fsl_rio_dbell *dbell;
+struct fsl_rio_pw *pw;
#ifdef CONFIG_E500
int fsl_rio_mcheck_exception(struct pt_regs *regs)
@@ -311,42 +109,6 @@
#endif
/**
- * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
- * @mport: RapidIO master port info
- * @index: ID of RapidIO interface
- * @destid: Destination ID of target device
- * @data: 16-bit info field of RapidIO doorbell message
- *
- * Sends a MPC85xx doorbell message. Returns %0 on success or
- * %-EINVAL on failure.
- */
-static int fsl_rio_doorbell_send(struct rio_mport *mport,
- int index, u16 destid, u16 data)
-{
- struct rio_priv *priv = mport->priv;
- pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
- index, destid, data);
- switch (mport->phy_type) {
- case RIO_PHY_PARALLEL:
- out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
- out_be16(priv->dbell_win, data);
- break;
- case RIO_PHY_SERIAL:
- /* In the serial version silicons, such as MPC8548, MPC8641,
- * below operations is must be.
- */
- out_be32(&priv->msg_regs->odmr, 0x00000000);
- out_be32(&priv->msg_regs->odretcr, 0x00000004);
- out_be32(&priv->msg_regs->oddpr, destid << 16);
- out_be32(&priv->msg_regs->oddatr, data);
- out_be32(&priv->msg_regs->odmr, 0x00000001);
- break;
- }
-
- return 0;
-}
-
-/**
* fsl_local_config_read - Generate a MPC85xx local config space read
* @mport: RapidIO master port info
* @index: ID of RapdiIO interface
@@ -384,8 +146,8 @@
{
struct rio_priv *priv = mport->priv;
pr_debug
- ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
- index, offset, data);
+ ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
+ index, offset, data);
out_be32(priv->regs_win + offset, data);
return 0;
@@ -413,8 +175,9 @@
u32 rval, err = 0;
pr_debug
- ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
- index, destid, hopcount, offset, len);
+ ("fsl_rio_config_read:"
+ " index %d destid %d hopcount %d offset %8.8x len %d\n",
+ index, destid, hopcount, offset, len);
/* 16MB maintenance window possible */
/* allow only aligned access to maintenance registers */
@@ -423,7 +186,7 @@
out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | (offset >> 12));
- out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
@@ -470,8 +233,9 @@
struct rio_priv *priv = mport->priv;
u8 *data;
pr_debug
- ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
- index, destid, hopcount, offset, len, val);
+ ("fsl_rio_config_write:"
+ " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ index, destid, hopcount, offset, len, val);
/* 16MB maintenance windows possible */
/* allow only aligned access to maintenance registers */
@@ -480,7 +244,7 @@
out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | (offset >> 12));
- out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
@@ -500,590 +264,7 @@
return 0;
}
-/**
- * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
- * @mport: Master port with outbound message queue
- * @rdev: Target of outbound message
- * @mbox: Outbound mailbox
- * @buffer: Message to add to outbound queue
- * @len: Length of message
- *
- * Adds the @buffer message to the MPC85xx outbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int
-fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
- void *buffer, size_t len)
-{
- struct rio_priv *priv = mport->priv;
- u32 omr;
- struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt
- + priv->msg_tx_ring.tx_slot;
- int ret = 0;
-
- pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
- "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
-
- if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
- ret = -EINVAL;
- goto out;
- }
-
- /* Copy and clear rest of buffer */
- memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer,
- len);
- if (len < (RIO_MAX_MSG_SIZE - 4))
- memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
- + len, 0, RIO_MAX_MSG_SIZE - len);
-
- switch (mport->phy_type) {
- case RIO_PHY_PARALLEL:
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
-
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
- break;
- case RIO_PHY_SERIAL:
- /* Set mbox field for message, and set destid */
- desc->dport = (rdev->destid << 16) | (mbox & 0x3);
-
- /* Enable EOMI interrupt and priority */
- desc->dattr = 0x28000000;
- break;
- }
-
- /* Set transfer size aligned to next power of 2 (in double words) */
- desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
-
- /* Set snooping and source buffer address */
- desc->saddr = 0x00000004
- | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
-
- /* Increment enqueue pointer */
- omr = in_be32(&priv->msg_regs->omr);
- out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
-
- /* Go to next descriptor */
- if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
- priv->msg_tx_ring.tx_slot = 0;
-
- out:
- return ret;
-}
-
-/**
- * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_tx_handler(int irq, void *dev_instance)
-{
- int osr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- osr = in_be32(&priv->msg_regs->osr);
-
- if (osr & RIO_MSG_OSR_TE) {
- pr_info("RIO: outbound message transmission error\n");
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_QOI) {
- pr_info("RIO: outbound message queue overflow\n");
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_EOMI) {
- u32 dqp = in_be32(&priv->msg_regs->odqdpar);
- int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1,
- slot);
-
- /* Ack the end-of-message interrupt */
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the outbound mailbox ring
- *
- * Initializes buffer ring, request the outbound message interrupt,
- * and enables the outbound message unit. Returns %0 on success and
- * %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, j, rc = 0;
- struct rio_priv *priv = mport->priv;
-
- if ((entries < RIO_MIN_TX_RING_SIZE) ||
- (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize shadow copy ring */
- priv->msg_tx_ring.dev_id = dev_id;
- priv->msg_tx_ring.size = entries;
-
- for (i = 0; i < priv->msg_tx_ring.size; i++) {
- priv->msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
- if (!priv->msg_tx_ring.virt_buffer[i]) {
- rc = -ENOMEM;
- for (j = 0; j < priv->msg_tx_ring.size; j++)
- if (priv->msg_tx_ring.virt_buffer[j])
- dma_free_coherent(priv->dev,
- RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.
- virt_buffer[j],
- priv->msg_tx_ring.
- phys_buffer[j]);
- goto out;
- }
- }
-
- /* Initialize outbound message descriptor ring */
- priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- &priv->msg_tx_ring.phys, GFP_KERNEL);
- if (!priv->msg_tx_ring.virt) {
- rc = -ENOMEM;
- goto out_dma;
- }
- memset(priv->msg_tx_ring.virt, 0,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
- priv->msg_tx_ring.tx_slot = 0;
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
- out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
-
- /* Configure for snooping */
- out_be32(&priv->msg_regs->osar, 0x00000004);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->osr, 0x000000b3);
-
- /* Hook up outbound message handler */
- rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
- "msg_tx", (void *)mport);
- if (rc < 0)
- goto out_irq;
-
- /*
- * Configure outbound message unit
- * Snooping
- * Interrupts (all enabled, except QEIE)
- * Chaining mode
- * Disable
- */
- out_be32(&priv->msg_regs->omr, 0x00100220);
-
- /* Set number of entries */
- out_be32(&priv->msg_regs->omr,
- in_be32(&priv->msg_regs->omr) |
- ((get_bitmask_order(entries) - 2) << 12));
-
- /* Now enable the unit */
- out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1);
-
- out:
- return rc;
-
- out_irq:
- dma_free_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
- out_dma:
- for (i = 0; i < priv->msg_tx_ring.size; i++)
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.virt_buffer[i],
- priv->msg_tx_ring.phys_buffer[i]);
-
- return rc;
-}
-
-/**
- * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the outbound message unit, free all buffers, and
- * frees the outbound message interrupt.
- */
-static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- /* Disable inbound message unit */
- out_be32(&priv->msg_regs->omr, 0);
-
- /* Free ring */
- dma_free_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
- /* Free interrupt */
- free_irq(IRQ_RIO_TX(mport), (void *)mport);
-}
-
-/**
- * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_rx_handler(int irq, void *dev_instance)
-{
- int isr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- isr = in_be32(&priv->msg_regs->isr);
-
- if (isr & RIO_MSG_ISR_TE) {
- pr_info("RIO: inbound message reception error\n");
- out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE);
- goto out;
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (isr & RIO_MSG_ISR_DIQI) {
- /*
- * We implement *only* mailbox 0, but can receive messages
- * for any mailbox/letter to that mailbox destination. So,
- * make the callback with an unknown/invalid mailbox number
- * argument.
- */
- port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
-
- /* Ack the queueing interrupt */
- out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the inbound mailbox ring
- *
- * Initializes buffer ring, request the inbound message interrupt,
- * and enables the inbound message unit. Returns %0 on success
- * and %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, rc = 0;
- struct rio_priv *priv = mport->priv;
-
- if ((entries < RIO_MIN_RX_RING_SIZE) ||
- (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize client buffer ring */
- priv->msg_rx_ring.dev_id = dev_id;
- priv->msg_rx_ring.size = entries;
- priv->msg_rx_ring.rx_slot = 0;
- for (i = 0; i < priv->msg_rx_ring.size; i++)
- priv->msg_rx_ring.virt_buffer[i] = NULL;
-
- /* Initialize inbound message ring */
- priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
- priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- &priv->msg_rx_ring.phys, GFP_KERNEL);
- if (!priv->msg_rx_ring.virt) {
- rc = -ENOMEM;
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
- out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->isr, 0x00000091);
-
- /* Hook up inbound message handler */
- rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
- "msg_rx", (void *)mport);
- if (rc < 0) {
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.virt_buffer[i],
- priv->msg_tx_ring.phys_buffer[i]);
- goto out;
- }
-
- /*
- * Configure inbound message unit:
- * Snooping
- * 4KB max message size
- * Unmask all interrupt sources
- * Disable
- */
- out_be32(&priv->msg_regs->imr, 0x001b0060);
-
- /* Set number of queue entries */
- setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
-
- /* Now enable the unit */
- setbits32(&priv->msg_regs->imr, 0x1);
-
- out:
- return rc;
-}
-
-/**
- * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the inbound message unit, free all buffers, and
- * frees the inbound message interrupt.
- */
-static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- /* Disable inbound message unit */
- out_be32(&priv->msg_regs->imr, 0);
-
- /* Free ring */
- dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
-
- /* Free interrupt */
- free_irq(IRQ_RIO_RX(mport), (void *)mport);
-}
-
-/**
- * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- * @buf: Buffer to add to inbound queue
- *
- * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
-{
- int rc = 0;
- struct rio_priv *priv = mport->priv;
-
- pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
- priv->msg_rx_ring.rx_slot);
-
- if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) {
- printk(KERN_ERR
- "RIO: error adding inbound buffer %d, buffer exists\n",
- priv->msg_rx_ring.rx_slot);
- rc = -EINVAL;
- goto out;
- }
-
- priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
- if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
- priv->msg_rx_ring.rx_slot = 0;
-
- out:
- return rc;
-}
-
-/**
- * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- *
- * Gets the next available inbound message from the inbound message queue.
- * A pointer to the message is returned on success or NULL on failure.
- */
-static void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- u32 phys_buf, virt_buf;
- void *buf = NULL;
- int buf_idx;
-
- phys_buf = in_be32(&priv->msg_regs->ifqdpar);
-
- /* If no more messages, then bail out */
- if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
- goto out2;
-
- virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf
- - priv->msg_rx_ring.phys);
- buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
- buf = priv->msg_rx_ring.virt_buffer[buf_idx];
-
- if (!buf) {
- printk(KERN_ERR
- "RIO: inbound message copy failed, no buffers\n");
- goto out1;
- }
-
- /* Copy max message size, caller is expected to allocate that big */
- memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
-
- /* Clear the available buffer */
- priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
-
- out1:
- setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
-
- out2:
- return buf;
-}
-
-/**
- * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles doorbell interrupts. Parses a list of registered
- * doorbell event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_dbell_handler(int irq, void *dev_instance)
-{
- int dsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- dsr = in_be32(&priv->msg_regs->dsr);
-
- if (dsr & DOORBELL_DSR_TE) {
- pr_info("RIO: doorbell reception error\n");
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
- goto out;
- }
-
- if (dsr & DOORBELL_DSR_QFI) {
- pr_info("RIO: doorbell queue full\n");
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (dsr & DOORBELL_DSR_DIQI) {
- u32 dmsg =
- (u32) priv->dbell_ring.virt +
- (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
- struct rio_dbell *dbell;
- int found = 0;
-
- pr_debug
- ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-
- list_for_each_entry(dbell, &port->dbells, node) {
- if ((dbell->res->start <= DBELL_INF(dmsg)) &&
- (dbell->res->end >= DBELL_INF(dmsg))) {
- found = 1;
- break;
- }
- }
- if (found) {
- dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
- DBELL_INF(dmsg));
- } else {
- pr_debug
- ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
- }
- setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_rio_doorbell_init - MPC85xx doorbell interface init
- * @mport: Master port implementing the inbound doorbell unit
- *
- * Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_doorbell_init(struct rio_mport *mport)
-{
- struct rio_priv *priv = mport->priv;
- int rc = 0;
-
- /* Map outbound doorbell window immediately after maintenance window */
- priv->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
- RIO_DBELL_WIN_SIZE);
- if (!priv->dbell_win) {
- printk(KERN_ERR
- "RIO: unable to map outbound doorbell window\n");
- rc = -ENOMEM;
- goto out;
- }
-
- /* Initialize inbound doorbells */
- priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
- DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
- if (!priv->dbell_ring.virt) {
- printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
- rc = -ENOMEM;
- iounmap(priv->dbell_win);
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
- out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->dsr, 0x00000091);
-
- /* Hook up doorbell handler */
- rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
- "dbell_rx", (void *)mport);
- if (rc < 0) {
- iounmap(priv->dbell_win);
- dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
- priv->dbell_ring.virt, priv->dbell_ring.phys);
- printk(KERN_ERR
- "MPC85xx RIO: unable to request inbound doorbell irq");
- goto out;
- }
-
- /* Configure doorbells for snooping, 512 entries, and enable */
- out_be32(&priv->msg_regs->dmr, 0x00108161);
-
- out:
- return rc;
-}
-
-static void port_error_handler(struct rio_mport *port, int offset)
+void fsl_rio_port_error_handler(int offset)
{
/*XXX: Error recovery is not implemented, we just clear errors */
out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
@@ -1098,263 +279,6 @@
out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
}
}
-
-static void msg_unit_error_handler(struct rio_mport *port)
-{
- struct rio_priv *priv = port->priv;
-
- /*XXX: Error recovery is not implemented, we just clear errors */
- out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
-
- out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
-
- out_be32(&priv->msg_regs->odsr, ODSR_CLEAR);
- out_be32(&priv->msg_regs->dsr, IDSR_CLEAR);
-
- out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR);
-}
-
-/**
- * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles port write interrupts. Parses a list of registered
- * port write event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_port_write_handler(int irq, void *dev_instance)
-{
- u32 ipwmr, ipwsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
- u32 epwisr, tmp;
-
- epwisr = in_be32(priv->regs_win + RIO_EPWISR);
- if (!(epwisr & RIO_EPWISR_PW))
- goto pw_done;
-
- ipwmr = in_be32(&priv->msg_regs->pwmr);
- ipwsr = in_be32(&priv->msg_regs->pwsr);
-
-#ifdef DEBUG_PW
- pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
- if (ipwsr & RIO_IPWSR_QF)
- pr_debug(" QF");
- if (ipwsr & RIO_IPWSR_TE)
- pr_debug(" TE");
- if (ipwsr & RIO_IPWSR_QFI)
- pr_debug(" QFI");
- if (ipwsr & RIO_IPWSR_PWD)
- pr_debug(" PWD");
- if (ipwsr & RIO_IPWSR_PWB)
- pr_debug(" PWB");
- pr_debug(" )\n");
-#endif
- /* Schedule deferred processing if PW was received */
- if (ipwsr & RIO_IPWSR_QFI) {
- /* Save PW message (if there is room in FIFO),
- * otherwise discard it.
- */
- if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
- priv->port_write_msg.msg_count++;
- kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
- RIO_PW_MSG_SIZE);
- } else {
- priv->port_write_msg.discard_count++;
- pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- }
- /* Clear interrupt and issue Clear Queue command. This allows
- * another port-write to be received.
- */
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_QFI);
- out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
-
- schedule_work(&priv->pw_work);
- }
-
- if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
- priv->port_write_msg.err_count++;
- pr_debug("RIO: Port-Write Transaction Err (%d)\n",
- priv->port_write_msg.err_count);
- /* Clear Transaction Error: port-write controller should be
- * disabled when clearing this error
- */
- out_be32(&priv->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_TE);
- out_be32(&priv->msg_regs->pwmr, ipwmr);
- }
-
- if (ipwsr & RIO_IPWSR_PWD) {
- priv->port_write_msg.discard_count++;
- pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_PWD);
- }
-
-pw_done:
- if (epwisr & RIO_EPWISR_PINT1) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- port_error_handler(port, 0);
- }
-
- if (epwisr & RIO_EPWISR_PINT2) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- port_error_handler(port, 1);
- }
-
- if (epwisr & RIO_EPWISR_MU) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- msg_unit_error_handler(port);
- }
-
- return IRQ_HANDLED;
-}
-
-static void fsl_pw_dpc(struct work_struct *work)
-{
- struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
- unsigned long flags;
- u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
-
- /*
- * Process port-write messages
- */
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
- RIO_PW_MSG_SIZE)) {
- /* Process one message */
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-#ifdef DEBUG_PW
- {
- u32 i;
- pr_debug("%s : Port-Write Message:", __func__);
- for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
- if ((i%4) == 0)
- pr_debug("\n0x%02x: 0x%08x", i*4,
- msg_buffer[i]);
- else
- pr_debug(" 0x%08x", msg_buffer[i]);
- }
- pr_debug("\n");
- }
-#endif
- /* Pass the port-write message to RIO core for processing */
- rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- }
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-}
-
-/**
- * fsl_rio_pw_enable - enable/disable port-write interface init
- * @mport: Master port implementing the port write unit
- * @enable: 1=enable; 0=disable port-write message handling
- */
-static int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
-{
- struct rio_priv *priv = mport->priv;
- u32 rval;
-
- rval = in_be32(&priv->msg_regs->pwmr);
-
- if (enable)
- rval |= RIO_IPWMR_PWE;
- else
- rval &= ~RIO_IPWMR_PWE;
-
- out_be32(&priv->msg_regs->pwmr, rval);
-
- return 0;
-}
-
-/**
- * fsl_rio_port_write_init - MPC85xx port write interface init
- * @mport: Master port implementing the port write unit
- *
- * Initializes port write unit hardware and DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_port_write_init(struct rio_mport *mport)
-{
- struct rio_priv *priv = mport->priv;
- int rc = 0;
-
- /* Following configurations require a disabled port write controller */
- out_be32(&priv->msg_regs->pwmr,
- in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
-
- /* Initialize port write */
- priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
- RIO_PW_MSG_SIZE,
- &priv->port_write_msg.phys, GFP_KERNEL);
- if (!priv->port_write_msg.virt) {
- pr_err("RIO: unable allocate port write queue\n");
- return -ENOMEM;
- }
-
- priv->port_write_msg.err_count = 0;
- priv->port_write_msg.discard_count = 0;
-
- /* Point dequeue/enqueue pointers at first entry */
- out_be32(&priv->msg_regs->epwqbar, 0);
- out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
-
- pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
- in_be32(&priv->msg_regs->epwqbar),
- in_be32(&priv->msg_regs->pwqbar));
-
- /* Clear interrupt status IPWSR */
- out_be32(&priv->msg_regs->pwsr,
- (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
-
- /* Configure port write contoller for snooping enable all reporting,
- clear queue full */
- out_be32(&priv->msg_regs->pwmr,
- RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
-
-
- /* Hook up port-write handler */
- rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
- IRQF_SHARED, "port-write", (void *)mport);
- if (rc < 0) {
- pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
- goto err_out;
- }
- /* Enable Error Interrupt */
- out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
-
- INIT_WORK(&priv->pw_work, fsl_pw_dpc);
- spin_lock_init(&priv->pw_fifo_lock);
- if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
- pr_err("FIFO allocation failed\n");
- rc = -ENOMEM;
- goto err_out_irq;
- }
-
- pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
- in_be32(&priv->msg_regs->pwmr),
- in_be32(&priv->msg_regs->pwsr));
-
- return rc;
-
-err_out_irq:
- free_irq(IRQ_RIO_PW(mport), (void *)mport);
-err_out:
- dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
- priv->port_write_msg.virt,
- priv->port_write_msg.phys);
- return rc;
-}
-
static inline void fsl_rio_info(struct device *dev, u32 ccsr)
{
const char *str;
@@ -1411,16 +335,21 @@
struct rio_mport *port;
struct rio_priv *priv;
int rc = 0;
- const u32 *dt_range, *cell;
- struct resource regs;
+ const u32 *dt_range, *cell, *port_index;
+ u32 active_ports = 0;
+ struct resource regs, rmu_regs;
+ struct device_node *np, *rmu_node;
int rlen;
u32 ccsr;
- u64 law_start, law_size;
+ u64 range_start, range_size;
int paw, aw, sw;
+ u32 i;
+ static int tmp;
+ struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
if (!dev->dev.of_node) {
dev_err(&dev->dev, "Device OF-Node is NULL");
- return -EFAULT;
+ return -ENODEV;
}
rc = of_address_to_resource(dev->dev.of_node, 0, ®s);
@@ -1429,37 +358,17 @@
dev->dev.of_node->full_name);
return -EFAULT;
}
- dev_info(&dev->dev, "Of-device full name %s\n", dev->dev.of_node->full_name);
+ dev_info(&dev->dev, "Of-device full name %s\n",
+ dev->dev.of_node->full_name);
dev_info(&dev->dev, "Regs: %pR\n", ®s);
- dt_range = of_get_property(dev->dev.of_node, "ranges", &rlen);
- if (!dt_range) {
- dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
- dev->dev.of_node->full_name);
- return -EFAULT;
+ rio_regs_win = ioremap(regs.start, resource_size(®s));
+ if (!rio_regs_win) {
+ dev_err(&dev->dev, "Unable to map rio register window\n");
+ rc = -ENOMEM;
+ goto err_rio_regs;
}
- /* Get node address wide */
- cell = of_get_property(dev->dev.of_node, "#address-cells", NULL);
- if (cell)
- aw = *cell;
- else
- aw = of_n_addr_cells(dev->dev.of_node);
- /* Get node size wide */
- cell = of_get_property(dev->dev.of_node, "#size-cells", NULL);
- if (cell)
- sw = *cell;
- else
- sw = of_n_size_cells(dev->dev.of_node);
- /* Get parent address wide wide */
- paw = of_n_addr_cells(dev->dev.of_node);
-
- law_start = of_read_number(dt_range + aw, paw);
- law_size = of_read_number(dt_range + aw + paw, sw);
-
- dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
- law_start, law_size);
-
ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
if (!ops) {
rc = -ENOMEM;
@@ -1479,143 +388,257 @@
ops->add_inb_buffer = fsl_add_inb_buffer;
ops->get_inb_message = fsl_get_inb_message;
- port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
- if (!port) {
+ rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
+ if (!rmu_node)
+ goto err_rmu;
+ rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
+ if (rc) {
+ dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+ rmu_node->full_name);
+ goto err_rmu;
+ }
+ rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
+ if (!rmu_regs_win) {
+ dev_err(&dev->dev, "Unable to map rmu register window\n");
rc = -ENOMEM;
- goto err_port;
+ goto err_rmu;
}
- port->index = 0;
+ for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
+ rmu_np[tmp] = np;
+ tmp++;
+ }
- priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
- if (!priv) {
- printk(KERN_ERR "Can't alloc memory for 'priv'\n");
+ /*set up doobell node*/
+ np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
+ if (!np) {
+ rc = -ENODEV;
+ goto err_dbell;
+ }
+ dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
+ if (!(dbell)) {
+ dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
rc = -ENOMEM;
- goto err_priv;
+ goto err_dbell;
}
+ dbell->dev = &dev->dev;
+ dbell->bellirq = irq_of_parse_and_map(np, 1);
+ dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
- INIT_LIST_HEAD(&port->dbells);
- port->iores.start = law_start;
- port->iores.end = law_start + law_size - 1;
- port->iores.flags = IORESOURCE_MEM;
- port->iores.name = "rio_io_win";
-
- if (request_resource(&iomem_resource, &port->iores) < 0) {
- dev_err(&dev->dev, "RIO: Error requesting master port region"
- " 0x%016llx-0x%016llx\n",
- (u64)port->iores.start, (u64)port->iores.end);
- rc = -ENOMEM;
- goto err_res;
+ aw = of_n_addr_cells(np);
+ dt_range = of_get_property(np, "reg", &rlen);
+ if (!dt_range) {
+ pr_err("%s: unable to find 'reg' property\n",
+ np->full_name);
+ rc = -ENOMEM;
+ goto err_pw;
}
+ range_start = of_read_number(dt_range, aw);
+ dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
+ (u32)range_start);
- priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
- priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
- priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3);
- priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4);
- dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n",
- priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq);
-
- rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
- rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
- rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
- strcpy(port->name, "RIO0 mport");
-
- priv->dev = &dev->dev;
-
- port->ops = ops;
- port->priv = priv;
- port->phys_efptr = 0x100;
-
- priv->regs_win = ioremap(regs.start, resource_size(®s));
- rio_regs_win = priv->regs_win;
-
- /* Probe the master port phy type */
- ccsr = in_be32(priv->regs_win + RIO_CCSR);
- port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
- dev_info(&dev->dev, "RapidIO PHY type: %s\n",
- (port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
- ((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
- "unknown"));
- /* Checking the port training status */
- if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
- dev_err(&dev->dev, "Port is not ready. "
- "Try to restart connection...\n");
- switch (port->phy_type) {
- case RIO_PHY_SERIAL:
- /* Disable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0);
- /* Set 1x lane */
- setbits32(priv->regs_win + RIO_CCSR, 0x02000000);
- /* Enable ports */
- setbits32(priv->regs_win + RIO_CCSR, 0x00600000);
- break;
- case RIO_PHY_PARALLEL:
- /* Disable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0x22000000);
- /* Enable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0x44000000);
- break;
- }
- msleep(100);
- if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
- dev_err(&dev->dev, "Port restart failed.\n");
- rc = -ENOLINK;
- goto err;
- }
- dev_info(&dev->dev, "Port restart success!\n");
+ /*set up port write node*/
+ np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
+ if (!np) {
+ rc = -ENODEV;
+ goto err_pw;
}
- fsl_rio_info(&dev->dev, ccsr);
-
- port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
- & RIO_PEF_CTLS) >> 4;
- dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
- port->sys_size ? 65536 : 256);
-
- if (rio_register_mport(port))
+ pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
+ if (!(pw)) {
+ dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
+ rc = -ENOMEM;
+ goto err_pw;
+ }
+ pw->dev = &dev->dev;
+ pw->pwirq = irq_of_parse_and_map(np, 0);
+ dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
+ aw = of_n_addr_cells(np);
+ dt_range = of_get_property(np, "reg", &rlen);
+ if (!dt_range) {
+ pr_err("%s: unable to find 'reg' property\n",
+ np->full_name);
+ rc = -ENOMEM;
goto err;
+ }
+ range_start = of_read_number(dt_range, aw);
+ pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
- if (port->host_deviceid >= 0)
- out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
- RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
- else
- out_be32(priv->regs_win + RIO_GCCSR, 0x00000000);
+ /*set up ports node*/
+ for_each_child_of_node(dev->dev.of_node, np) {
+ port_index = of_get_property(np, "cell-index", NULL);
+ if (!port_index) {
+ dev_err(&dev->dev, "Can't get %s property 'cell-index'\n",
+ np->full_name);
+ continue;
+ }
- priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
- + RIO_ATMU_REGS_OFFSET);
- priv->maint_atmu_regs = priv->atmu_regs + 1;
- priv->dbell_atmu_regs = priv->atmu_regs + 2;
- priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
- ((port->phy_type == RIO_PHY_SERIAL) ?
- RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
+ dt_range = of_get_property(np, "ranges", &rlen);
+ if (!dt_range) {
+ dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
+ np->full_name);
+ continue;
+ }
- /* Set to receive any dist ID for serial RapidIO controller. */
- if (port->phy_type == RIO_PHY_SERIAL)
- out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
+ /* Get node address wide */
+ cell = of_get_property(np, "#address-cells", NULL);
+ if (cell)
+ aw = *cell;
+ else
+ aw = of_n_addr_cells(np);
+ /* Get node size wide */
+ cell = of_get_property(np, "#size-cells", NULL);
+ if (cell)
+ sw = *cell;
+ else
+ sw = of_n_size_cells(np);
+ /* Get parent address wide wide */
+ paw = of_n_addr_cells(np);
+ range_start = of_read_number(dt_range + aw, paw);
+ range_size = of_read_number(dt_range + aw + paw, sw);
- /* Configure maintenance transaction window */
- out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
- out_be32(&priv->maint_atmu_regs->rowar,
- 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
+ dev_info(&dev->dev, "%s: LAW start 0x%016llx, size 0x%016llx.\n",
+ np->full_name, range_start, range_size);
- priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
+ port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!port)
+ continue;
- /* Configure outbound doorbell window */
- out_be32(&priv->dbell_atmu_regs->rowbar,
- (law_start + RIO_MAINT_WIN_SIZE) >> 12);
- out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */
- fsl_rio_doorbell_init(port);
- fsl_rio_port_write_init(port);
+ i = *port_index - 1;
+ port->index = (unsigned char)i;
+
+ priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
+ kfree(port);
+ continue;
+ }
+
+ INIT_LIST_HEAD(&port->dbells);
+ port->iores.start = range_start;
+ port->iores.end = port->iores.start + range_size - 1;
+ port->iores.flags = IORESOURCE_MEM;
+ port->iores.name = "rio_io_win";
+
+ if (request_resource(&iomem_resource, &port->iores) < 0) {
+ dev_err(&dev->dev, "RIO: Error requesting master port region"
+ " 0x%016llx-0x%016llx\n",
+ (u64)port->iores.start, (u64)port->iores.end);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ sprintf(port->name, "RIO mport %d", i);
+
+ priv->dev = &dev->dev;
+ port->ops = ops;
+ port->priv = priv;
+ port->phys_efptr = 0x100;
+ priv->regs_win = rio_regs_win;
+
+ /* Probe the master port phy type */
+ ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
+ port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
+ if (port->phy_type == RIO_PHY_PARALLEL) {
+ dev_err(&dev->dev, "RIO: Parallel PHY type, unsupported port type!\n");
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ dev_info(&dev->dev, "RapidIO PHY type: Serial\n");
+ /* Checking the port training status */
+ if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
+ dev_err(&dev->dev, "Port %d is not ready. "
+ "Try to restart connection...\n", i);
+ /* Disable ports */
+ out_be32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0);
+ /* Set 1x lane */
+ setbits32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x02000000);
+ /* Enable ports */
+ setbits32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x00600000);
+ msleep(100);
+ if (in_be32((priv->regs_win
+ + RIO_ESCSR + i*0x20)) & 1) {
+ dev_err(&dev->dev,
+ "Port %d restart failed.\n", i);
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ dev_info(&dev->dev, "Port %d restart success!\n", i);
+ }
+ fsl_rio_info(&dev->dev, ccsr);
+
+ port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+ & RIO_PEF_CTLS) >> 4;
+ dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
+ if (rio_register_mport(port)) {
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ if (port->host_deviceid >= 0)
+ out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
+ RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
+ else
+ out_be32(priv->regs_win + RIO_GCCSR,
+ RIO_PORT_GEN_MASTER);
+
+ priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
+ RIO_ATMU_REGS_PORT2_OFFSET));
+
+ priv->maint_atmu_regs = priv->atmu_regs + 1;
+
+ /* Set to receive any dist ID for serial RapidIO controller. */
+ if (port->phy_type == RIO_PHY_SERIAL)
+ out_be32((priv->regs_win
+ + RIO_ISR_AACR + i*0x80), RIO_ISR_AACR_AA);
+
+ /* Configure maintenance transaction window */
+ out_be32(&priv->maint_atmu_regs->rowbar,
+ port->iores.start >> 12);
+ out_be32(&priv->maint_atmu_regs->rowar,
+ 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
+
+ priv->maint_win = ioremap(port->iores.start,
+ RIO_MAINT_WIN_SIZE);
+
+ rio_law_start = range_start;
+
+ fsl_rio_setup_rmu(port, rmu_np[i]);
+
+ dbell->mport[i] = port;
+
+ active_ports++;
+ }
+
+ if (!active_ports) {
+ rc = -ENOLINK;
+ goto err;
+ }
+
+ fsl_rio_doorbell_init(dbell);
+ fsl_rio_port_write_init(pw);
return 0;
err:
- iounmap(priv->regs_win);
- release_resource(&port->iores);
-err_res:
- kfree(priv);
-err_priv:
- kfree(port);
-err_port:
+ kfree(pw);
+err_pw:
+ kfree(dbell);
+err_dbell:
+ iounmap(rmu_regs_win);
+err_rmu:
kfree(ops);
err_ops:
+ iounmap(rio_regs_win);
+err_rio_regs:
return rc;
}
@@ -1631,7 +654,7 @@
static const struct of_device_id fsl_of_rio_rpn_ids[] = {
{
- .compatible = "fsl,rapidio-delta",
+ .compatible = "fsl,srio",
},
{},
};
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
new file mode 100644
index 0000000..ae8e274
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -0,0 +1,135 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com>
+ * Liu Gang <Gang.Liu@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FSL_RIO_H
+#define __FSL_RIO_H
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/kfifo.h>
+
+#define RIO_REGS_WIN(mport) (((struct rio_priv *)(mport->priv))->regs_win)
+
+#define RIO_MAINT_WIN_SIZE 0x400000
+#define RIO_LTLEDCSR 0x0608
+
+#define DOORBELL_ROWAR_EN 0x80000000
+#define DOORBELL_ROWAR_TFLOWLV 0x08000000 /* highest priority level */
+#define DOORBELL_ROWAR_PCI 0x02000000 /* PCI window */
+#define DOORBELL_ROWAR_NREAD 0x00040000 /* NREAD */
+#define DOORBELL_ROWAR_MAINTRD 0x00070000 /* maintenance read */
+#define DOORBELL_ROWAR_RES 0x00002000 /* wrtpy: reserverd */
+#define DOORBELL_ROWAR_MAINTWD 0x00007000
+#define DOORBELL_ROWAR_SIZE 0x0000000b /* window size is 4k */
+
+#define RIO_ATMU_REGS_PORT1_OFFSET 0x10c00
+#define RIO_ATMU_REGS_PORT2_OFFSET 0x10e00
+#define RIO_S_DBELL_REGS_OFFSET 0x13400
+#define RIO_S_PW_REGS_OFFSET 0x134e0
+#define RIO_ATMU_REGS_DBELL_OFFSET 0x10C40
+
+#define MAX_MSG_UNIT_NUM 2
+#define MAX_PORT_NUM 4
+
+struct rio_atmu_regs {
+ u32 rowtar;
+ u32 rowtear;
+ u32 rowbar;
+ u32 pad1;
+ u32 rowar;
+ u32 pad2[3];
+};
+
+struct rio_dbell_ring {
+ void *virt;
+ dma_addr_t phys;
+};
+
+struct rio_port_write_msg {
+ void *virt;
+ dma_addr_t phys;
+ u32 msg_count;
+ u32 err_count;
+ u32 discard_count;
+};
+
+struct fsl_rio_dbell {
+ struct rio_mport *mport[MAX_PORT_NUM];
+ struct device *dev;
+ struct rio_dbell_regs __iomem *dbell_regs;
+ struct rio_dbell_ring dbell_ring;
+ int bellirq;
+};
+
+struct fsl_rio_pw {
+ struct device *dev;
+ struct rio_pw_regs __iomem *pw_regs;
+ struct rio_port_write_msg port_write_msg;
+ int pwirq;
+ struct work_struct pw_work;
+ struct kfifo pw_fifo;
+ spinlock_t pw_fifo_lock;
+};
+
+struct rio_priv {
+ struct device *dev;
+ void __iomem *regs_win;
+ struct rio_atmu_regs __iomem *atmu_regs;
+ struct rio_atmu_regs __iomem *maint_atmu_regs;
+ void __iomem *maint_win;
+ void *rmm_handle; /* RapidIO message manager(unit) Handle */
+};
+
+extern void __iomem *rio_regs_win;
+extern void __iomem *rmu_regs_win;
+
+extern resource_size_t rio_law_start;
+
+extern struct fsl_rio_dbell *dbell;
+extern struct fsl_rio_pw *pw;
+
+extern int fsl_rio_setup_rmu(struct rio_mport *mport,
+ struct device_node *node);
+extern int fsl_rio_port_write_init(struct fsl_rio_pw *pw);
+extern int fsl_rio_pw_enable(struct rio_mport *mport, int enable);
+extern void fsl_rio_port_error_handler(int offset);
+extern int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell);
+
+extern int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data);
+extern int fsl_add_outb_message(struct rio_mport *mport,
+ struct rio_dev *rdev,
+ int mbox, void *buffer, size_t len);
+extern int fsl_open_outb_mbox(struct rio_mport *mport,
+ void *dev_id, int mbox, int entries);
+extern void fsl_close_outb_mbox(struct rio_mport *mport, int mbox);
+extern int fsl_open_inb_mbox(struct rio_mport *mport,
+ void *dev_id, int mbox, int entries);
+extern void fsl_close_inb_mbox(struct rio_mport *mport, int mbox);
+extern int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf);
+extern void *fsl_get_inb_message(struct rio_mport *mport, int mbox);
+
+#endif
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
new file mode 100644
index 0000000..1548578
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -0,0 +1,1104 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO RMU support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com>
+ * Liu Gang <Gang.Liu@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include "fsl_rio.h"
+
+#define GET_RMM_HANDLE(mport) \
+ (((struct rio_priv *)(mport->priv))->rmm_handle)
+
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_PW(m) (((struct fsl_rio_pw *)(m))->pwirq)
+#define IRQ_RIO_BELL(m) (((struct fsl_rio_dbell *)(m))->bellirq)
+#define IRQ_RIO_TX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->txirq)
+#define IRQ_RIO_RX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->rxirq)
+
+#define RIO_MIN_TX_RING_SIZE 2
+#define RIO_MAX_TX_RING_SIZE 2048
+#define RIO_MIN_RX_RING_SIZE 2
+#define RIO_MAX_RX_RING_SIZE 2048
+
+#define RIO_IPWMR_SEN 0x00100000
+#define RIO_IPWMR_QFIE 0x00000100
+#define RIO_IPWMR_EIE 0x00000020
+#define RIO_IPWMR_CQ 0x00000002
+#define RIO_IPWMR_PWE 0x00000001
+
+#define RIO_IPWSR_QF 0x00100000
+#define RIO_IPWSR_TE 0x00000080
+#define RIO_IPWSR_QFI 0x00000010
+#define RIO_IPWSR_PWD 0x00000008
+#define RIO_IPWSR_PWB 0x00000004
+
+#define RIO_EPWISR 0x10010
+/* EPWISR Error match value */
+#define RIO_EPWISR_PINT1 0x80000000
+#define RIO_EPWISR_PINT2 0x40000000
+#define RIO_EPWISR_MU 0x00000002
+#define RIO_EPWISR_PW 0x00000001
+
+#define IPWSR_CLEAR 0x98
+#define OMSR_CLEAR 0x1cb3
+#define IMSR_CLEAR 0x491
+#define IDSR_CLEAR 0x91
+#define ODSR_CLEAR 0x1c00
+#define LTLEECSR_ENABLE_ALL 0xFFC000FC
+#define RIO_LTLEECSR 0x060c
+
+#define RIO_IM0SR 0x64
+#define RIO_IM1SR 0x164
+#define RIO_OM0SR 0x4
+#define RIO_OM1SR 0x104
+
+#define RIO_DBELL_WIN_SIZE 0x1000
+
+#define RIO_MSG_OMR_MUI 0x00000002
+#define RIO_MSG_OSR_TE 0x00000080
+#define RIO_MSG_OSR_QOI 0x00000020
+#define RIO_MSG_OSR_QFI 0x00000010
+#define RIO_MSG_OSR_MUB 0x00000004
+#define RIO_MSG_OSR_EOMI 0x00000002
+#define RIO_MSG_OSR_QEI 0x00000001
+
+#define RIO_MSG_IMR_MI 0x00000002
+#define RIO_MSG_ISR_TE 0x00000080
+#define RIO_MSG_ISR_QFI 0x00000010
+#define RIO_MSG_ISR_DIQI 0x00000001
+
+#define RIO_MSG_DESC_SIZE 32
+#define RIO_MSG_BUFFER_SIZE 4096
+
+#define DOORBELL_DMR_DI 0x00000002
+#define DOORBELL_DSR_TE 0x00000080
+#define DOORBELL_DSR_QFI 0x00000010
+#define DOORBELL_DSR_DIQI 0x00000001
+#define DOORBELL_TID_OFFSET 0x02
+#define DOORBELL_SID_OFFSET 0x04
+#define DOORBELL_INFO_OFFSET 0x06
+
+#define DOORBELL_MESSAGE_SIZE 0x08
+#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_msg_regs {
+ u32 omr;
+ u32 osr;
+ u32 pad1;
+ u32 odqdpar;
+ u32 pad2;
+ u32 osar;
+ u32 odpr;
+ u32 odatr;
+ u32 odcr;
+ u32 pad3;
+ u32 odqepar;
+ u32 pad4[13];
+ u32 imr;
+ u32 isr;
+ u32 pad5;
+ u32 ifqdpar;
+ u32 pad6;
+ u32 ifqepar;
+};
+
+struct rio_dbell_regs {
+ u32 odmr;
+ u32 odsr;
+ u32 pad1[4];
+ u32 oddpr;
+ u32 oddatr;
+ u32 pad2[3];
+ u32 odretcr;
+ u32 pad3[12];
+ u32 dmr;
+ u32 dsr;
+ u32 pad4;
+ u32 dqdpar;
+ u32 pad5;
+ u32 dqepar;
+};
+
+struct rio_pw_regs {
+ u32 pwmr;
+ u32 pwsr;
+ u32 epwqbar;
+ u32 pwqbar;
+};
+
+
+struct rio_tx_desc {
+ u32 pad1;
+ u32 saddr;
+ u32 dport;
+ u32 dattr;
+ u32 pad2;
+ u32 pad3;
+ u32 dwcnt;
+ u32 pad4;
+};
+
+struct rio_msg_tx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+ dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+ int tx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct rio_msg_rx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+ int rx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct fsl_rmu {
+ struct rio_msg_regs __iomem *msg_regs;
+ struct rio_msg_tx_ring msg_tx_ring;
+ struct rio_msg_rx_ring msg_rx_ring;
+ int txirq;
+ int rxirq;
+};
+
+/**
+ * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_tx_handler(int irq, void *dev_instance)
+{
+ int osr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ osr = in_be32(&rmu->msg_regs->osr);
+
+ if (osr & RIO_MSG_OSR_TE) {
+ pr_info("RIO: outbound message transmission error\n");
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_TE);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_QOI) {
+ pr_info("RIO: outbound message queue overflow\n");
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_QOI);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_EOMI) {
+ u32 dqp = in_be32(&rmu->msg_regs->odqdpar);
+ int slot = (dqp - rmu->msg_tx_ring.phys) >> 5;
+ if (port->outb_msg[0].mcback != NULL) {
+ port->outb_msg[0].mcback(port, rmu->msg_tx_ring.dev_id,
+ -1,
+ slot);
+ }
+ /* Ack the end-of-message interrupt */
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_EOMI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_rx_handler(int irq, void *dev_instance)
+{
+ int isr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ isr = in_be32(&rmu->msg_regs->isr);
+
+ if (isr & RIO_MSG_ISR_TE) {
+ pr_info("RIO: inbound message reception error\n");
+ out_be32((void *)&rmu->msg_regs->isr, RIO_MSG_ISR_TE);
+ goto out;
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (isr & RIO_MSG_ISR_DIQI) {
+ /*
+ * Can receive messages for any mailbox/letter to that
+ * mailbox destination. So, make the callback with an
+ * unknown/invalid mailbox number argument.
+ */
+ if (port->inb_msg[0].mcback != NULL)
+ port->inb_msg[0].mcback(port, rmu->msg_rx_ring.dev_id,
+ -1,
+ -1);
+
+ /* Ack the queueing interrupt */
+ out_be32(&rmu->msg_regs->isr, RIO_MSG_ISR_DIQI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_dbell_handler(int irq, void *dev_instance)
+{
+ int dsr;
+ struct fsl_rio_dbell *fsl_dbell = (struct fsl_rio_dbell *)dev_instance;
+ int i;
+
+ dsr = in_be32(&fsl_dbell->dbell_regs->dsr);
+
+ if (dsr & DOORBELL_DSR_TE) {
+ pr_info("RIO: doorbell reception error\n");
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_TE);
+ goto out;
+ }
+
+ if (dsr & DOORBELL_DSR_QFI) {
+ pr_info("RIO: doorbell queue full\n");
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_QFI);
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (dsr & DOORBELL_DSR_DIQI) {
+ u32 dmsg =
+ (u32) fsl_dbell->dbell_ring.virt +
+ (in_be32(&fsl_dbell->dbell_regs->dqdpar) & 0xfff);
+ struct rio_dbell *dbell;
+ int found = 0;
+
+ pr_debug
+ ("RIO: processing doorbell,"
+ " sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+ for (i = 0; i < MAX_PORT_NUM; i++) {
+ if (fsl_dbell->mport[i]) {
+ list_for_each_entry(dbell,
+ &fsl_dbell->mport[i]->dbells, node) {
+ if ((dbell->res->start
+ <= DBELL_INF(dmsg))
+ && (dbell->res->end
+ >= DBELL_INF(dmsg))) {
+ found = 1;
+ break;
+ }
+ }
+ if (found && dbell->dinb) {
+ dbell->dinb(fsl_dbell->mport[i],
+ dbell->dev_id, DBELL_SID(dmsg),
+ DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ pr_debug
+ ("RIO: spurious doorbell,"
+ " sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ }
+ setbits32(&fsl_dbell->dbell_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_DIQI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+void msg_unit_error_handler(void)
+{
+
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ out_be32((u32 *)(rmu_regs_win + RIO_IM0SR), IMSR_CLEAR);
+ out_be32((u32 *)(rmu_regs_win + RIO_IM1SR), IMSR_CLEAR);
+ out_be32((u32 *)(rmu_regs_win + RIO_OM0SR), OMSR_CLEAR);
+ out_be32((u32 *)(rmu_regs_win + RIO_OM1SR), OMSR_CLEAR);
+
+ out_be32(&dbell->dbell_regs->odsr, ODSR_CLEAR);
+ out_be32(&dbell->dbell_regs->dsr, IDSR_CLEAR);
+
+ out_be32(&pw->pw_regs->pwsr, IPWSR_CLEAR);
+}
+
+/**
+ * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles port write interrupts. Parses a list of registered
+ * port write event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_port_write_handler(int irq, void *dev_instance)
+{
+ u32 ipwmr, ipwsr;
+ struct fsl_rio_pw *pw = (struct fsl_rio_pw *)dev_instance;
+ u32 epwisr, tmp;
+
+ epwisr = in_be32(rio_regs_win + RIO_EPWISR);
+ if (!(epwisr & RIO_EPWISR_PW))
+ goto pw_done;
+
+ ipwmr = in_be32(&pw->pw_regs->pwmr);
+ ipwsr = in_be32(&pw->pw_regs->pwsr);
+
+#ifdef DEBUG_PW
+ pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
+ if (ipwsr & RIO_IPWSR_QF)
+ pr_debug(" QF");
+ if (ipwsr & RIO_IPWSR_TE)
+ pr_debug(" TE");
+ if (ipwsr & RIO_IPWSR_QFI)
+ pr_debug(" QFI");
+ if (ipwsr & RIO_IPWSR_PWD)
+ pr_debug(" PWD");
+ if (ipwsr & RIO_IPWSR_PWB)
+ pr_debug(" PWB");
+ pr_debug(" )\n");
+#endif
+ /* Schedule deferred processing if PW was received */
+ if (ipwsr & RIO_IPWSR_QFI) {
+ /* Save PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ if (kfifo_avail(&pw->pw_fifo) >= RIO_PW_MSG_SIZE) {
+ pw->port_write_msg.msg_count++;
+ kfifo_in(&pw->pw_fifo, pw->port_write_msg.virt,
+ RIO_PW_MSG_SIZE);
+ } else {
+ pw->port_write_msg.discard_count++;
+ pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
+ pw->port_write_msg.discard_count);
+ }
+ /* Clear interrupt and issue Clear Queue command. This allows
+ * another port-write to be received.
+ */
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_QFI);
+ out_be32(&pw->pw_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+
+ schedule_work(&pw->pw_work);
+ }
+
+ if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
+ pw->port_write_msg.err_count++;
+ pr_debug("RIO: Port-Write Transaction Err (%d)\n",
+ pw->port_write_msg.err_count);
+ /* Clear Transaction Error: port-write controller should be
+ * disabled when clearing this error
+ */
+ out_be32(&pw->pw_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_TE);
+ out_be32(&pw->pw_regs->pwmr, ipwmr);
+ }
+
+ if (ipwsr & RIO_IPWSR_PWD) {
+ pw->port_write_msg.discard_count++;
+ pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
+ pw->port_write_msg.discard_count);
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_PWD);
+ }
+
+pw_done:
+ if (epwisr & RIO_EPWISR_PINT1) {
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ fsl_rio_port_error_handler(0);
+ }
+
+ if (epwisr & RIO_EPWISR_PINT2) {
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ fsl_rio_port_error_handler(1);
+ }
+
+ if (epwisr & RIO_EPWISR_MU) {
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ msg_unit_error_handler();
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void fsl_pw_dpc(struct work_struct *work)
+{
+ struct fsl_rio_pw *pw = container_of(work, struct fsl_rio_pw, pw_work);
+ u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
+
+ /*
+ * Process port-write messages
+ */
+ while (kfifo_out_spinlocked(&pw->pw_fifo, (unsigned char *)msg_buffer,
+ RIO_PW_MSG_SIZE, &pw->pw_fifo_lock)) {
+ /* Process one message */
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ pr_debug("%s : Port-Write Message:", __func__);
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
+ if ((i%4) == 0)
+ pr_debug("\n0x%02x: 0x%08x", i*4,
+ msg_buffer[i]);
+ else
+ pr_debug(" 0x%08x", msg_buffer[i]);
+ }
+ pr_debug("\n");
+ }
+#endif
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+ }
+}
+
+/**
+ * fsl_rio_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
+{
+ u32 rval;
+
+ rval = in_be32(&pw->pw_regs->pwmr);
+
+ if (enable)
+ rval |= RIO_IPWMR_PWE;
+ else
+ rval &= ~RIO_IPWMR_PWE;
+
+ out_be32(&pw->pw_regs->pwmr, rval);
+
+ return 0;
+}
+
+/**
+ * fsl_rio_port_write_init - MPC85xx port write interface init
+ * @mport: Master port implementing the port write unit
+ *
+ * Initializes port write unit hardware and DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+
+int fsl_rio_port_write_init(struct fsl_rio_pw *pw)
+{
+ int rc = 0;
+
+ /* Following configurations require a disabled port write controller */
+ out_be32(&pw->pw_regs->pwmr,
+ in_be32(&pw->pw_regs->pwmr) & ~RIO_IPWMR_PWE);
+
+ /* Initialize port write */
+ pw->port_write_msg.virt = dma_alloc_coherent(pw->dev,
+ RIO_PW_MSG_SIZE,
+ &pw->port_write_msg.phys, GFP_KERNEL);
+ if (!pw->port_write_msg.virt) {
+ pr_err("RIO: unable allocate port write queue\n");
+ return -ENOMEM;
+ }
+
+ pw->port_write_msg.err_count = 0;
+ pw->port_write_msg.discard_count = 0;
+
+ /* Point dequeue/enqueue pointers at first entry */
+ out_be32(&pw->pw_regs->epwqbar, 0);
+ out_be32(&pw->pw_regs->pwqbar, (u32) pw->port_write_msg.phys);
+
+ pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
+ in_be32(&pw->pw_regs->epwqbar),
+ in_be32(&pw->pw_regs->pwqbar));
+
+ /* Clear interrupt status IPWSR */
+ out_be32(&pw->pw_regs->pwsr,
+ (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+ /* Configure port write contoller for snooping enable all reporting,
+ clear queue full */
+ out_be32(&pw->pw_regs->pwmr,
+ RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
+
+
+ /* Hook up port-write handler */
+ rc = request_irq(IRQ_RIO_PW(pw), fsl_rio_port_write_handler,
+ IRQF_SHARED, "port-write", (void *)pw);
+ if (rc < 0) {
+ pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
+ goto err_out;
+ }
+ /* Enable Error Interrupt */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
+
+ INIT_WORK(&pw->pw_work, fsl_pw_dpc);
+ spin_lock_init(&pw->pw_fifo_lock);
+ if (kfifo_alloc(&pw->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ pr_err("FIFO allocation failed\n");
+ rc = -ENOMEM;
+ goto err_out_irq;
+ }
+
+ pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
+ in_be32(&pw->pw_regs->pwmr),
+ in_be32(&pw->pw_regs->pwsr));
+
+ return rc;
+
+err_out_irq:
+ free_irq(IRQ_RIO_PW(pw), (void *)pw);
+err_out:
+ dma_free_coherent(pw->dev, RIO_PW_MSG_SIZE,
+ pw->port_write_msg.virt,
+ pw->port_write_msg.phys);
+ return rc;
+}
+
+/**
+ * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data)
+{
+ pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
+ index, destid, data);
+
+ /* In the serial version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&dbell->dbell_regs->odmr, 0x00000000);
+ out_be32(&dbell->dbell_regs->odretcr, 0x00000004);
+ out_be32(&dbell->dbell_regs->oddpr, destid << 16);
+ out_be32(&dbell->dbell_regs->oddatr, (index << 20) | data);
+ out_be32(&dbell->dbell_regs->odmr, 0x00000001);
+
+ return 0;
+}
+
+/**
+ * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int
+fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ u32 omr;
+ struct rio_tx_desc *desc = (struct rio_tx_desc *)rmu->msg_tx_ring.virt
+ + rmu->msg_tx_ring.tx_slot;
+ int ret = 0;
+
+ pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
+ "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
+ if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Copy and clear rest of buffer */
+ memcpy(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot], buffer,
+ len);
+ if (len < (RIO_MAX_MSG_SIZE - 4))
+ memset(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot]
+ + len, 0, RIO_MAX_MSG_SIZE - len);
+
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | (mbox & 0x3);
+
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000 | ((mport->index) << 20);
+
+ /* Set transfer size aligned to next power of 2 (in double words) */
+ desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+ /* Set snooping and source buffer address */
+ desc->saddr = 0x00000004
+ | rmu->msg_tx_ring.phys_buffer[rmu->msg_tx_ring.tx_slot];
+
+ /* Increment enqueue pointer */
+ omr = in_be32(&rmu->msg_regs->omr);
+ out_be32(&rmu->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+ /* Go to next descriptor */
+ if (++rmu->msg_tx_ring.tx_slot == rmu->msg_tx_ring.size)
+ rmu->msg_tx_ring.tx_slot = 0;
+
+out:
+ return ret;
+}
+
+/**
+ * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int
+fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, j, rc = 0;
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ if ((entries < RIO_MIN_TX_RING_SIZE) ||
+ (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize shadow copy ring */
+ rmu->msg_tx_ring.dev_id = dev_id;
+ rmu->msg_tx_ring.size = entries;
+
+ for (i = 0; i < rmu->msg_tx_ring.size; i++) {
+ rmu->msg_tx_ring.virt_buffer[i] =
+ dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ &rmu->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
+ if (!rmu->msg_tx_ring.virt_buffer[i]) {
+ rc = -ENOMEM;
+ for (j = 0; j < rmu->msg_tx_ring.size; j++)
+ if (rmu->msg_tx_ring.virt_buffer[j])
+ dma_free_coherent(priv->dev,
+ RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.
+ virt_buffer[j],
+ rmu->msg_tx_ring.
+ phys_buffer[j]);
+ goto out;
+ }
+ }
+
+ /* Initialize outbound message descriptor ring */
+ rmu->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ &rmu->msg_tx_ring.phys, GFP_KERNEL);
+ if (!rmu->msg_tx_ring.virt) {
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+ memset(rmu->msg_tx_ring.virt, 0,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+ rmu->msg_tx_ring.tx_slot = 0;
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->odqdpar, rmu->msg_tx_ring.phys);
+ out_be32(&rmu->msg_regs->odqepar, rmu->msg_tx_ring.phys);
+
+ /* Configure for snooping */
+ out_be32(&rmu->msg_regs->osar, 0x00000004);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->osr, 0x000000b3);
+
+ /* Hook up outbound message handler */
+ rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
+ "msg_tx", (void *)mport);
+ if (rc < 0)
+ goto out_irq;
+
+ /*
+ * Configure outbound message unit
+ * Snooping
+ * Interrupts (all enabled, except QEIE)
+ * Chaining mode
+ * Disable
+ */
+ out_be32(&rmu->msg_regs->omr, 0x00100220);
+
+ /* Set number of entries */
+ out_be32(&rmu->msg_regs->omr,
+ in_be32(&rmu->msg_regs->omr) |
+ ((get_bitmask_order(entries) - 2) << 12));
+
+ /* Now enable the unit */
+ out_be32(&rmu->msg_regs->omr, in_be32(&rmu->msg_regs->omr) | 0x1);
+
+out:
+ return rc;
+
+out_irq:
+ dma_free_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+out_dma:
+ for (i = 0; i < rmu->msg_tx_ring.size; i++)
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.virt_buffer[i],
+ rmu->msg_tx_ring.phys_buffer[i]);
+
+ return rc;
+}
+
+/**
+ * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ /* Disable inbound message unit */
+ out_be32(&rmu->msg_regs->omr, 0);
+
+ /* Free ring */
+ dma_free_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_TX(mport), (void *)mport);
+}
+
+/**
+ * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int
+fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, rc = 0;
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ if ((entries < RIO_MIN_RX_RING_SIZE) ||
+ (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize client buffer ring */
+ rmu->msg_rx_ring.dev_id = dev_id;
+ rmu->msg_rx_ring.size = entries;
+ rmu->msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < rmu->msg_rx_ring.size; i++)
+ rmu->msg_rx_ring.virt_buffer[i] = NULL;
+
+ /* Initialize inbound message ring */
+ rmu->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
+ rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ &rmu->msg_rx_ring.phys, GFP_KERNEL);
+ if (!rmu->msg_rx_ring.virt) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->ifqdpar, (u32) rmu->msg_rx_ring.phys);
+ out_be32(&rmu->msg_regs->ifqepar, (u32) rmu->msg_rx_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->isr, 0x00000091);
+
+ /* Hook up inbound message handler */
+ rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+ "msg_rx", (void *)mport);
+ if (rc < 0) {
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.virt_buffer[i],
+ rmu->msg_tx_ring.phys_buffer[i]);
+ goto out;
+ }
+
+ /*
+ * Configure inbound message unit:
+ * Snooping
+ * 4KB max message size
+ * Unmask all interrupt sources
+ * Disable
+ */
+ out_be32(&rmu->msg_regs->imr, 0x001b0060);
+
+ /* Set number of queue entries */
+ setbits32(&rmu->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
+
+ /* Now enable the unit */
+ setbits32(&rmu->msg_regs->imr, 0x1);
+
+out:
+ return rc;
+}
+
+/**
+ * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ /* Disable inbound message unit */
+ out_be32(&rmu->msg_regs->imr, 0);
+
+ /* Free ring */
+ dma_free_coherent(priv->dev, rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_RX(mport), (void *)mport);
+}
+
+/**
+ * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ int rc = 0;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+ rmu->msg_rx_ring.rx_slot);
+
+ if (rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot]) {
+ printk(KERN_ERR
+ "RIO: error adding inbound buffer %d, buffer exists\n",
+ rmu->msg_rx_ring.rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot] = buf;
+ if (++rmu->msg_rx_ring.rx_slot == rmu->msg_rx_ring.size)
+ rmu->msg_rx_ring.rx_slot = 0;
+
+out:
+ return rc;
+}
+
+/**
+ * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ u32 phys_buf, virt_buf;
+ void *buf = NULL;
+ int buf_idx;
+
+ phys_buf = in_be32(&rmu->msg_regs->ifqdpar);
+
+ /* If no more messages, then bail out */
+ if (phys_buf == in_be32(&rmu->msg_regs->ifqepar))
+ goto out2;
+
+ virt_buf = (u32) rmu->msg_rx_ring.virt + (phys_buf
+ - rmu->msg_rx_ring.phys);
+ buf_idx = (phys_buf - rmu->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = rmu->msg_rx_ring.virt_buffer[buf_idx];
+
+ if (!buf) {
+ printk(KERN_ERR
+ "RIO: inbound message copy failed, no buffers\n");
+ goto out1;
+ }
+
+ /* Copy max message size, caller is expected to allocate that big */
+ memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+ /* Clear the available buffer */
+ rmu->msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+out1:
+ setbits32(&rmu->msg_regs->imr, RIO_MSG_IMR_MI);
+
+out2:
+ return buf;
+}
+
+/**
+ * fsl_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell)
+{
+ int rc = 0;
+
+ /* Initialize inbound doorbells */
+ dbell->dbell_ring.virt = dma_alloc_coherent(dbell->dev, 512 *
+ DOORBELL_MESSAGE_SIZE, &dbell->dbell_ring.phys, GFP_KERNEL);
+ if (!dbell->dbell_ring.virt) {
+ printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&dbell->dbell_regs->dqdpar, (u32) dbell->dbell_ring.phys);
+ out_be32(&dbell->dbell_regs->dqepar, (u32) dbell->dbell_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&dbell->dbell_regs->dsr, 0x00000091);
+
+ /* Hook up doorbell handler */
+ rc = request_irq(IRQ_RIO_BELL(dbell), fsl_rio_dbell_handler, 0,
+ "dbell_rx", (void *)dbell);
+ if (rc < 0) {
+ dma_free_coherent(dbell->dev, 512 * DOORBELL_MESSAGE_SIZE,
+ dbell->dbell_ring.virt, dbell->dbell_ring.phys);
+ printk(KERN_ERR
+ "MPC85xx RIO: unable to request inbound doorbell irq");
+ goto out;
+ }
+
+ /* Configure doorbells for snooping, 512 entries, and enable */
+ out_be32(&dbell->dbell_regs->dmr, 0x00108161);
+
+out:
+ return rc;
+}
+
+int fsl_rio_setup_rmu(struct rio_mport *mport, struct device_node *node)
+{
+ struct rio_priv *priv;
+ struct fsl_rmu *rmu;
+ u64 msg_start;
+ const u32 *msg_addr;
+ int mlen;
+ int aw;
+
+ if (!mport || !mport->priv)
+ return -EINVAL;
+
+ priv = mport->priv;
+
+ if (!node) {
+ dev_warn(priv->dev, "Can't get %s property 'fsl,rmu'\n",
+ priv->dev->of_node->full_name);
+ return -EINVAL;
+ }
+
+ rmu = kzalloc(sizeof(struct fsl_rmu), GFP_KERNEL);
+ if (!rmu)
+ return -ENOMEM;
+
+ aw = of_n_addr_cells(node);
+ msg_addr = of_get_property(node, "reg", &mlen);
+ if (!msg_addr) {
+ pr_err("%s: unable to find 'reg' property of message-unit\n",
+ node->full_name);
+ kfree(rmu);
+ return -ENOMEM;
+ }
+ msg_start = of_read_number(msg_addr, aw);
+
+ rmu->msg_regs = (struct rio_msg_regs *)
+ (rmu_regs_win + (u32)msg_start);
+
+ rmu->txirq = irq_of_parse_and_map(node, 0);
+ rmu->rxirq = irq_of_parse_and_map(node, 1);
+ printk(KERN_INFO "%s: txirq: %d, rxirq %d\n",
+ node->full_name, rmu->txirq, rmu->rxirq);
+
+ priv->rmm_handle = rmu;
+
+ rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+ rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8c7e852..4e9ccb1 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -154,7 +154,7 @@
{
unsigned int cpu = 0;
- if (mpic->flags & MPIC_PRIMARY)
+ if (!(mpic->flags & MPIC_SECONDARY))
cpu = hard_smp_processor_id();
return cpu;
@@ -315,29 +315,25 @@
}
#ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
- struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
- const u32 *dbasep;
-
- dbasep = of_get_property(node, "dcr-reg", NULL);
-
- rb->dhost = dcr_map(node, *dbasep + offset, size);
+ phys_addr_t phys_addr = dcr_resource_start(mpic->node, 0);
+ rb->dhost = dcr_map(mpic->node, phys_addr + offset, size);
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
-static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+static inline void mpic_map(struct mpic *mpic,
phys_addr_t phys_addr, struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
if (mpic->flags & MPIC_USES_DCR)
- _mpic_map_dcr(mpic, node, rb, offset, size);
+ _mpic_map_dcr(mpic, rb, offset, size);
else
_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
}
#else /* CONFIG_PPC_DCR */
-#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#endif /* !CONFIG_PPC_DCR */
@@ -901,7 +897,7 @@
if (vold != vnew)
mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vnew);
- return IRQ_SET_MASK_OK_NOCOPY;;
+ return IRQ_SET_MASK_OK_NOCOPY;
}
void mpic_set_vector(unsigned int virq, unsigned int vector)
@@ -990,7 +986,7 @@
#ifdef CONFIG_SMP
else if (hw >= mpic->ipi_vecs[0]) {
- WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+ WARN_ON(mpic->flags & MPIC_SECONDARY);
DBG("mpic: mapping as IPI\n");
irq_set_chip_data(virq, mpic);
@@ -1001,7 +997,7 @@
#endif /* CONFIG_SMP */
if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) {
- WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+ WARN_ON(mpic->flags & MPIC_SECONDARY);
DBG("mpic: mapping as timer\n");
irq_set_chip_data(virq, mpic);
@@ -1115,17 +1111,28 @@
return 0;
}
+/* IRQ handler for a secondary MPIC cascaded from another IRQ controller */
+static void mpic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct mpic *mpic = irq_desc_get_handler_data(desc);
+ unsigned int virq;
+
+ BUG_ON(!(mpic->flags & MPIC_SECONDARY));
+
+ virq = mpic_get_one_irq(mpic);
+ if (virq != NO_IRQ)
+ generic_handle_irq(virq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
static struct irq_host_ops mpic_host_ops = {
.match = mpic_host_match,
.map = mpic_host_map,
.xlate = mpic_host_xlate,
};
-static int mpic_reset_prohibited(struct device_node *node)
-{
- return node && of_get_property(node, "pic-no-reset", NULL);
-}
-
/*
* Exported functions
*/
@@ -1137,27 +1144,60 @@
unsigned int irq_count,
const char *name)
{
- struct mpic *mpic;
- u32 greg_feature;
- const char *vers;
- int i;
- int intvec_top;
- u64 paddr = phys_addr;
+ int i, psize, intvec_top;
+ struct mpic *mpic;
+ u32 greg_feature;
+ const char *vers;
+ const u32 *psrc;
+
+ /* Default MPIC search parameters */
+ static const struct of_device_id __initconst mpic_device_id[] = {
+ { .type = "open-pic", },
+ { .compatible = "open-pic", },
+ {},
+ };
+
+ /*
+ * If we were not passed a device-tree node, then perform the default
+ * search for standardized a standardized OpenPIC.
+ */
+ if (node) {
+ node = of_node_get(node);
+ } else {
+ node = of_find_matching_node(NULL, mpic_device_id);
+ if (!node)
+ return NULL;
+ }
+
+ /* Pick the physical address from the device tree if unspecified */
+ if (!phys_addr) {
+ /* Check if it is DCR-based */
+ if (of_get_property(node, "dcr-reg", NULL)) {
+ flags |= MPIC_USES_DCR;
+ } else {
+ struct resource r;
+ if (of_address_to_resource(node, 0, &r))
+ goto err_of_node_put;
+ phys_addr = r.start;
+ }
+ }
mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
- return NULL;
+ goto err_of_node_put;
mpic->name = name;
+ mpic->node = node;
+ mpic->paddr = phys_addr;
mpic->hc_irq = mpic_irq_chip;
mpic->hc_irq.name = name;
- if (flags & MPIC_PRIMARY)
+ if (!(flags & MPIC_SECONDARY))
mpic->hc_irq.irq_set_affinity = mpic_set_affinity;
#ifdef CONFIG_MPIC_U3_HT_IRQS
mpic->hc_ht_irq = mpic_irq_ht_chip;
mpic->hc_ht_irq.name = name;
- if (flags & MPIC_PRIMARY)
+ if (!(flags & MPIC_SECONDARY))
mpic->hc_ht_irq.irq_set_affinity = mpic_set_affinity;
#endif /* CONFIG_MPIC_U3_HT_IRQS */
@@ -1194,28 +1234,22 @@
mpic->spurious_vec = intvec_top;
/* Check for "big-endian" in device-tree */
- if (node && of_get_property(node, "big-endian", NULL) != NULL)
+ if (of_get_property(mpic->node, "big-endian", NULL) != NULL)
mpic->flags |= MPIC_BIG_ENDIAN;
- if (node && of_device_is_compatible(node, "fsl,mpic"))
+ if (of_device_is_compatible(mpic->node, "fsl,mpic"))
mpic->flags |= MPIC_FSL;
/* Look for protected sources */
- if (node) {
- int psize;
- unsigned int bits, mapsize;
- const u32 *psrc =
- of_get_property(node, "protected-sources", &psize);
- if (psrc) {
- psize /= 4;
- bits = intvec_top + 1;
- mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
- mpic->protected = kzalloc(mapsize, GFP_KERNEL);
- BUG_ON(mpic->protected == NULL);
- for (i = 0; i < psize; i++) {
- if (psrc[i] > intvec_top)
- continue;
- __set_bit(psrc[i], mpic->protected);
- }
+ psrc = of_get_property(mpic->node, "protected-sources", &psize);
+ if (psrc) {
+ /* Allocate a bitmap with one bit per interrupt */
+ unsigned int mapsize = BITS_TO_LONGS(intvec_top + 1);
+ mpic->protected = kzalloc(mapsize*sizeof(long), GFP_KERNEL);
+ BUG_ON(mpic->protected == NULL);
+ for (i = 0; i < psize/sizeof(u32); i++) {
+ if (psrc[i] > intvec_top)
+ continue;
+ __set_bit(psrc[i], mpic->protected);
}
}
@@ -1224,42 +1258,32 @@
#endif
/* default register type */
- mpic->reg_type = (flags & MPIC_BIG_ENDIAN) ?
- mpic_access_mmio_be : mpic_access_mmio_le;
+ if (flags & MPIC_BIG_ENDIAN)
+ mpic->reg_type = mpic_access_mmio_be;
+ else
+ mpic->reg_type = mpic_access_mmio_le;
- /* If no physical address is passed in, a device-node is mandatory */
- BUG_ON(paddr == 0 && node == NULL);
-
- /* If no physical address passed in, check if it's dcr based */
- if (paddr == 0 && of_get_property(node, "dcr-reg", NULL) != NULL) {
+ /*
+ * An MPIC with a "dcr-reg" property must be accessed that way, but
+ * only if the kernel includes DCR support.
+ */
#ifdef CONFIG_PPC_DCR
- mpic->flags |= MPIC_USES_DCR;
+ if (flags & MPIC_USES_DCR)
mpic->reg_type = mpic_access_dcr;
#else
- BUG();
-#endif /* CONFIG_PPC_DCR */
- }
-
- /* If the MPIC is not DCR based, and no physical address was passed
- * in, try to obtain one
- */
- if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
- const u32 *reg = of_get_property(node, "reg", NULL);
- BUG_ON(reg == NULL);
- paddr = of_translate_address(node, reg);
- BUG_ON(paddr == OF_BAD_ADDR);
- }
+ BUG_ON(flags & MPIC_USES_DCR);
+#endif
/* Map the global registers */
- mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
- mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+ mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
/* When using a device-node, reset requests are only honored if the MPIC
* is allowed to reset.
*/
- if (mpic_reset_prohibited(node))
+ if (of_get_property(mpic->node, "pic-no-reset", NULL))
mpic->flags |= MPIC_NO_RESET;
if ((flags & MPIC_WANTS_RESET) && !(mpic->flags & MPIC_NO_RESET)) {
@@ -1307,7 +1331,7 @@
for_each_possible_cpu(i) {
unsigned int cpu = get_hard_smp_processor_id(i);
- mpic_map(mpic, node, paddr, &mpic->cpuregs[cpu],
+ mpic_map(mpic, mpic->paddr, &mpic->cpuregs[cpu],
MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@@ -1315,16 +1339,21 @@
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic_map(mpic, node, paddr, &mpic->isus[0],
+ mpic_map(mpic, mpic->paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
- mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+ mpic->irqhost = irq_alloc_host(mpic->node, IRQ_HOST_MAP_LINEAR,
isu_size ? isu_size : mpic->num_sources,
&mpic_host_ops,
flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+
+ /*
+ * FIXME: The code leaks the MPIC object and mappings here; this
+ * is very unlikely to fail but it ought to be fixed anyways.
+ */
if (mpic->irqhost == NULL)
return NULL;
@@ -1347,19 +1376,23 @@
}
printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx,"
" max %d CPUs\n",
- name, vers, (unsigned long long)paddr, num_possible_cpus());
+ name, vers, (unsigned long long)mpic->paddr, num_possible_cpus());
printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n",
mpic->isu_size, mpic->isu_shift, mpic->isu_mask);
mpic->next = mpics;
mpics = mpic;
- if (flags & MPIC_PRIMARY) {
+ if (!(flags & MPIC_SECONDARY)) {
mpic_primary = mpic;
irq_set_default_host(mpic->irqhost);
}
return mpic;
+
+err_of_node_put:
+ of_node_put(node);
+ return NULL;
}
void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
@@ -1369,7 +1402,7 @@
BUG_ON(isu_num >= MPIC_MAX_ISU);
- mpic_map(mpic, mpic->irqhost->of_node,
+ mpic_map(mpic,
paddr, &mpic->isus[isu_num], 0,
MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
@@ -1385,8 +1418,7 @@
void __init mpic_init(struct mpic *mpic)
{
- int i;
- int cpu;
+ int i, cpu;
BUG_ON(mpic->num_sources == 0);
@@ -1424,7 +1456,7 @@
/* Do the HT PIC fixups on U3 broken mpic */
DBG("MPIC flags: %x\n", mpic->flags);
- if ((mpic->flags & MPIC_U3_HT_IRQS) && (mpic->flags & MPIC_PRIMARY)) {
+ if ((mpic->flags & MPIC_U3_HT_IRQS) && !(mpic->flags & MPIC_SECONDARY)) {
mpic_scan_ht_pics(mpic);
mpic_u3msi_init(mpic);
}
@@ -1471,6 +1503,17 @@
GFP_KERNEL);
BUG_ON(mpic->save_data == NULL);
#endif
+
+ /* Check if this MPIC is chained from a parent interrupt controller */
+ if (mpic->flags & MPIC_SECONDARY) {
+ int virq = irq_of_parse_and_map(mpic->node, 0);
+ if (virq != NO_IRQ) {
+ printk(KERN_INFO "%s: hooking up to IRQ %d\n",
+ mpic->node->full_name, virq);
+ irq_set_handler_data(virq, mpic);
+ irq_set_chained_handler(virq, &mpic_cascade);
+ }
+ }
}
void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio)
diff --git a/arch/powerpc/sysdev/ppc4xx_cpm.c b/arch/powerpc/sysdev/ppc4xx_cpm.c
index 73b86cc..82e2cfe 100644
--- a/arch/powerpc/sysdev/ppc4xx_cpm.c
+++ b/arch/powerpc/sysdev/ppc4xx_cpm.c
@@ -179,12 +179,12 @@
static void cpm_idle_config_sysfs(void)
{
- struct sys_device *sys_dev;
+ struct device *dev;
unsigned long ret;
- sys_dev = get_cpu_sysdev(0);
+ dev = get_cpu_device(0);
- ret = sysfs_create_file(&sys_dev->kobj,
+ ret = sysfs_create_file(&dev->kobj,
&cpm_idle_attr.attr);
if (ret)
printk(KERN_WARNING
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 862f11b..4f05f75 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -185,9 +185,15 @@
out:
dma_offset_set = 1;
pci_dram_offset = res->start;
+ hose->dma_window_base_cur = res->start;
+ hose->dma_window_size = resource_size(res);
printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n",
pci_dram_offset);
+ printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n",
+ (unsigned long long)hose->dma_window_base_cur);
+ printk(KERN_INFO "DMA window size 0x%016llx\n",
+ (unsigned long long)hose->dma_window_size);
return 0;
}
@@ -647,6 +653,7 @@
struct ppc4xx_pciex_hwops
{
+ bool want_sdr;
int (*core_init)(struct device_node *np);
int (*port_init_hw)(struct ppc4xx_pciex_port *port);
int (*setup_utl)(struct ppc4xx_pciex_port *port);
@@ -916,6 +923,7 @@
static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc440spe_pciex_core_init,
.port_init_hw = ppc440speA_pciex_init_port_hw,
.setup_utl = ppc440speA_pciex_init_utl,
@@ -924,6 +932,7 @@
static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc440spe_pciex_core_init,
.port_init_hw = ppc440speB_pciex_init_port_hw,
.setup_utl = ppc440speB_pciex_init_utl,
@@ -1034,6 +1043,7 @@
static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc460ex_pciex_core_init,
.port_init_hw = ppc460ex_pciex_init_port_hw,
.setup_utl = ppc460ex_pciex_init_utl,
@@ -1181,6 +1191,7 @@
}
static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+ .want_sdr = true,
.core_init = ppc460sx_pciex_core_init,
.port_init_hw = ppc460sx_pciex_init_port_hw,
.setup_utl = ppc460sx_pciex_init_utl,
@@ -1276,6 +1287,7 @@
static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc405ex_pciex_core_init,
.port_init_hw = ppc405ex_pciex_init_port_hw,
.setup_utl = ppc405ex_pciex_init_utl,
@@ -1284,6 +1296,52 @@
#endif /* CONFIG_40x */
+#ifdef CONFIG_476FPE
+static int __init ppc_476fpe_pciex_core_init(struct device_node *np)
+{
+ return 4;
+}
+
+static void __init ppc_476fpe_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+ u32 timeout_ms = 20;
+ u32 val = 0, mask = (PECFG_TLDLP_LNKUP|PECFG_TLDLP_PRESENT);
+ void __iomem *mbase = ioremap(port->cfg_space.start + 0x10000000,
+ 0x1000);
+
+ printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
+
+ if (mbase == NULL) {
+ printk(KERN_WARNING "PCIE%d: failed to get cfg space\n",
+ port->index);
+ return;
+ }
+
+ while (timeout_ms--) {
+ val = in_le32(mbase + PECFG_TLDLP);
+
+ if ((val & mask) == mask)
+ break;
+ msleep(10);
+ }
+
+ if (val & PECFG_TLDLP_PRESENT) {
+ printk(KERN_INFO "PCIE%d: link is up !\n", port->index);
+ port->link = 1;
+ } else
+ printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index);
+
+ iounmap(mbase);
+ return;
+}
+
+static struct ppc4xx_pciex_hwops ppc_476fpe_pcie_hwops __initdata =
+{
+ .core_init = ppc_476fpe_pciex_core_init,
+ .check_link = ppc_476fpe_pciex_check_link,
+};
+#endif /* CONFIG_476FPE */
+
/* Check that the core has been initied and if not, do it */
static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
{
@@ -1309,6 +1367,10 @@
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
#endif
+#ifdef CONFIG_476FPE
+ if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe"))
+ ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
+#endif
if (ppc4xx_pciex_hwops == NULL) {
printk(KERN_WARNING "PCIE: unknown host type %s\n",
np->full_name);
@@ -1617,6 +1679,10 @@
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
| DCRO_PEGPL_OMRxMSKL_VAL);
+ else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
else
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
sa | DCRO_PEGPL_OMR1MSKL_UOT
@@ -1739,9 +1805,10 @@
/* Calculate window size */
sa = (0xffffffffffffffffull << ilog2(size));
if (res->flags & IORESOURCE_PREFETCH)
- sa |= 0x8;
+ sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
- if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
+ of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1972,13 +2039,15 @@
}
port->node = of_node_get(np);
- pval = of_get_property(np, "sdr-base", NULL);
- if (pval == NULL) {
- printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
- np->full_name);
- return;
+ if (ppc4xx_pciex_hwops->want_sdr) {
+ pval = of_get_property(np, "sdr-base", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
+ np->full_name);
+ return;
+ }
+ port->sdr_base = *pval;
}
- port->sdr_base = *pval;
/* Check if device_type property is set to "pci" or "pci-endpoint".
* Resulting from this setup this PCIe port will be configured
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 32ce763..bb48219 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -476,6 +476,13 @@
#define DCRO_PEGPL_OMR1MSKL_UOT 0x00000002
#define DCRO_PEGPL_OMR3MSKL_IO 0x00000002
+/* 476FPE */
+#define PCCFG_LCPA 0x270
+#define PECFG_TLDLP 0x3F8
+#define PECFG_TLDLP_LNKUP 0x00000008
+#define PECFG_TLDLP_PRESENT 0x00000010
+#define DCRO_PEGPL_476FPE_OMR1MSKL_UOT 0x00000004
+
/* SDR Bit Mappings */
#define PESDRx_RCSSET_HLDPLB 0x10000000
#define PESDRx_RCSSET_RSTGU 0x01000000
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index e23f23c..521e67a 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -139,14 +139,10 @@
struct qe_pin *qe_pin_request(struct device_node *np, int index)
{
struct qe_pin *qe_pin;
- struct device_node *gpio_np;
struct gpio_chip *gc;
struct of_mm_gpio_chip *mm_gc;
struct qe_gpio_chip *qe_gc;
int err;
- int size;
- const void *gpio_spec;
- const u32 *gpio_cells;
unsigned long flags;
qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
@@ -155,45 +151,25 @@
return ERR_PTR(-ENOMEM);
}
- err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
- &gpio_np, &gpio_spec);
- if (err) {
- pr_debug("%s: can't parse gpios property\n", __func__);
+ err = of_get_gpio(np, index);
+ if (err < 0)
goto err0;
- }
+ gc = gpio_to_chip(err);
+ if (WARN_ON(!gc))
+ goto err0;
- if (!of_device_is_compatible(gpio_np, "fsl,mpc8323-qe-pario-bank")) {
+ if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
pr_debug("%s: tried to get a non-qe pin\n", __func__);
err = -EINVAL;
- goto err1;
+ goto err0;
}
- gc = of_node_to_gpiochip(gpio_np);
- if (!gc) {
- pr_debug("%s: gpio controller %s isn't registered\n",
- np->full_name, gpio_np->full_name);
- err = -ENODEV;
- goto err1;
- }
-
- gpio_cells = of_get_property(gpio_np, "#gpio-cells", &size);
- if (!gpio_cells || size != sizeof(*gpio_cells) ||
- *gpio_cells != gc->of_gpio_n_cells) {
- pr_debug("%s: wrong #gpio-cells for %s\n",
- np->full_name, gpio_np->full_name);
- err = -EINVAL;
- goto err1;
- }
-
- err = gc->of_xlate(gc, np, gpio_spec, NULL);
- if (err < 0)
- goto err1;
-
mm_gc = to_of_mm_gpio_chip(gc);
qe_gc = to_qe_gpio_chip(mm_gc);
spin_lock_irqsave(&qe_gc->lock, flags);
+ err -= gc->base;
if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
qe_pin->controller = qe_gc;
qe_pin->num = err;
@@ -206,8 +182,6 @@
if (!err)
return qe_pin;
-err1:
- of_node_put(gpio_np);
err0:
kfree(qe_pin);
pr_debug("%s failed with status %d\n", __func__, err);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 18e75ca..73034bd 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -22,7 +22,6 @@
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/signal.h>
-#include <linux/sysdev.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/spinlock.h>
@@ -484,13 +483,14 @@
return 0;
}
-static struct sysdev_class qe_ic_sysclass = {
+static struct bus_type qe_ic_subsys = {
.name = "qe_ic",
+ .dev_name = "qe_ic",
};
-static struct sys_device device_qe_ic = {
+static struct device device_qe_ic = {
.id = 0,
- .cls = &qe_ic_sysclass,
+ .bus = &qe_ic_subsys,
};
static int __init init_qe_ic_sysfs(void)
@@ -499,12 +499,12 @@
printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
- rc = sysdev_class_register(&qe_ic_sysclass);
+ rc = subsys_system_register(&qe_ic_subsys, NULL);
if (rc) {
printk(KERN_ERR "Failed registering qe_ic sys class\n");
return -ENODEV;
}
- rc = sysdev_register(&device_qe_ic);
+ rc = device_register(&device_qe_ic);
if (rc) {
printk(KERN_ERR "Failed registering qe_ic sys device\n");
return -ENODEV;
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 3330fec..063c901 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -18,7 +18,6 @@
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/signal.h>
-#include <linux/sysdev.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/spinlock.h>
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 9518d36..253dce9 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -27,33 +27,50 @@
{
unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
long rc;
+ unsigned int ret = XICS_IRQ_SPURIOUS;
rc = plpar_hcall(H_XIRR, retbuf, cppr);
- if (rc != H_SUCCESS)
- panic(" bad return code xirr - rc = %lx\n", rc);
- return (unsigned int)retbuf[0];
-}
+ if (rc == H_SUCCESS) {
+ ret = (unsigned int)retbuf[0];
+ } else {
+ pr_err("%s: bad return code xirr cppr=0x%x returned %ld\n",
+ __func__, cppr, rc);
+ WARN_ON_ONCE(1);
+ }
-static inline void icp_hv_set_xirr(unsigned int value)
-{
- long rc = plpar_hcall_norets(H_EOI, value);
- if (rc != H_SUCCESS)
- panic("bad return code EOI - rc = %ld, value=%x\n", rc, value);
+ return ret;
}
static inline void icp_hv_set_cppr(u8 value)
{
long rc = plpar_hcall_norets(H_CPPR, value);
- if (rc != H_SUCCESS)
- panic("bad return code cppr - rc = %lx\n", rc);
+ if (rc != H_SUCCESS) {
+ pr_err("%s: bad return code cppr cppr=0x%x returned %ld\n",
+ __func__, value, rc);
+ WARN_ON_ONCE(1);
+ }
+}
+
+static inline void icp_hv_set_xirr(unsigned int value)
+{
+ long rc = plpar_hcall_norets(H_EOI, value);
+ if (rc != H_SUCCESS) {
+ pr_err("%s: bad return code eoi xirr=0x%x returned %ld\n",
+ __func__, value, rc);
+ WARN_ON_ONCE(1);
+ icp_hv_set_cppr(value >> 24);
+ }
}
static inline void icp_hv_set_qirr(int n_cpu , u8 value)
{
- long rc = plpar_hcall_norets(H_IPI, get_hard_smp_processor_id(n_cpu),
- value);
- if (rc != H_SUCCESS)
- panic("bad return code qirr - rc = %lx\n", rc);
+ int hw_cpu = get_hard_smp_processor_id(n_cpu);
+ long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+ if (rc != H_SUCCESS) {
+ pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
+ "returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);
+ WARN_ON_ONCE(1);
+ }
}
static void icp_hv_eoi(struct irq_data *d)
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 63762c6..d72eda6 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -137,7 +137,7 @@
* IPIs are marked IRQF_PERCPU. The handler was set in map.
*/
BUG_ON(request_irq(ipi, icp_ops->ipi_action,
- IRQF_PERCPU, "IPI", NULL));
+ IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL));
}
int __init xics_smp_probe(void)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 03a217a..cb95eea 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -228,13 +228,11 @@
t print backtrace\n\
x exit monitor and recover\n\
X exit monitor and dont recover\n"
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E)
" u dump segment table or SLB\n"
-#endif
-#ifdef CONFIG_PPC_STD_MMU_32
+#elif defined(CONFIG_PPC_STD_MMU_32)
" u dump segment registers\n"
-#endif
-#ifdef CONFIG_44x
+#elif defined(CONFIG_44x) || defined(CONFIG_PPC_BOOK3E)
" u dump TLB\n"
#endif
" ? help\n"
@@ -340,7 +338,7 @@
static inline int unrecoverable_excp(struct pt_regs *regs)
{
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOK3E)
+#if defined(CONFIG_4xx) || defined(CONFIG_PPC_BOOK3E)
/* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */
return 0;
#else
@@ -885,13 +883,11 @@
case 'u':
dump_segments();
break;
-#endif
-#ifdef CONFIG_4xx
+#elif defined(CONFIG_4xx)
case 'u':
dump_tlb_44x();
break;
-#endif
-#ifdef CONFIG_PPC_BOOK3E
+#elif defined(CONFIG_PPC_BOOK3E)
case 'u':
dump_tlb_book3e();
break;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 373679b..28d183c 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -87,11 +87,13 @@
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
- select HAVE_GET_USER_PAGES_FAST
select HAVE_ARCH_MUTEX_CPU_RELAX
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
select HAVE_RCU_TABLE_FREE if SMP
select ARCH_SAVE_PAGE_KEYS if HIBERNATION
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
select ARCH_INLINE_SPIN_TRYLOCK
select ARCH_INLINE_SPIN_TRYLOCK_BH
select ARCH_INLINE_SPIN_LOCK
@@ -345,9 +347,6 @@
Say N if you are unsure.
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
comment "Kernel preemption"
source "kernel/Kconfig.preempt"
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 92f1cb7..4de031d 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -115,21 +115,21 @@
j = 0;
for_each_online_cpu(i) {
os_data->os_cpu[j].per_cpu_user =
- cputime_to_jiffies(kstat_cpu(i).cpustat.user);
+ cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_USER]);
os_data->os_cpu[j].per_cpu_nice =
- cputime_to_jiffies(kstat_cpu(i).cpustat.nice);
+ cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_NICE]);
os_data->os_cpu[j].per_cpu_system =
- cputime_to_jiffies(kstat_cpu(i).cpustat.system);
+ cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_SYSTEM]);
os_data->os_cpu[j].per_cpu_idle =
- cputime_to_jiffies(kstat_cpu(i).cpustat.idle);
+ cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IDLE]);
os_data->os_cpu[j].per_cpu_irq =
- cputime_to_jiffies(kstat_cpu(i).cpustat.irq);
+ cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IRQ]);
os_data->os_cpu[j].per_cpu_softirq =
- cputime_to_jiffies(kstat_cpu(i).cpustat.softirq);
+ cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ]);
os_data->os_cpu[j].per_cpu_iowait =
- cputime_to_jiffies(kstat_cpu(i).cpustat.iowait);
+ cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IOWAIT]);
os_data->os_cpu[j].per_cpu_steal =
- cputime_to_jiffies(kstat_cpu(i).cpustat.steal);
+ cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_STEAL]);
os_data->os_cpu[j].cpu_id = i;
j++;
}
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 481f4f7..8a2a887 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -97,7 +97,7 @@
}
}
-static struct inode *hypfs_make_inode(struct super_block *sb, int mode)
+static struct inode *hypfs_make_inode(struct super_block *sb, umode_t mode)
{
struct inode *ret = new_inode(sb);
@@ -107,7 +107,7 @@
ret->i_uid = hypfs_info->uid;
ret->i_gid = hypfs_info->gid;
ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
- if (mode & S_IFDIR)
+ if (S_ISDIR(mode))
set_nlink(ret, 2);
}
return ret;
@@ -259,9 +259,9 @@
return 0;
}
-static int hypfs_show_options(struct seq_file *s, struct vfsmount *mnt)
+static int hypfs_show_options(struct seq_file *s, struct dentry *root)
{
- struct hypfs_sb_info *hypfs_info = mnt->mnt_sb->s_fs_info;
+ struct hypfs_sb_info *hypfs_info = root->d_sb->s_fs_info;
seq_printf(s, ",uid=%u", hypfs_info->uid);
seq_printf(s, ",gid=%u", hypfs_info->gid);
@@ -333,7 +333,7 @@
static struct dentry *hypfs_create_file(struct super_block *sb,
struct dentry *parent, const char *name,
- char *data, mode_t mode)
+ char *data, umode_t mode)
{
struct dentry *dentry;
struct inode *inode;
@@ -350,13 +350,13 @@
dentry = ERR_PTR(-ENOMEM);
goto fail;
}
- if (mode & S_IFREG) {
+ if (S_ISREG(mode)) {
inode->i_fop = &hypfs_file_ops;
if (data)
inode->i_size = strlen(data);
else
inode->i_size = 0;
- } else if (mode & S_IFDIR) {
+ } else if (S_ISDIR(mode)) {
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
inc_nlink(parent->d_inode);
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 0814348..c23c390 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -16,114 +16,100 @@
/* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */
-typedef unsigned long long cputime_t;
-typedef unsigned long long cputime64_t;
+typedef unsigned long long __nocast cputime_t;
+typedef unsigned long long __nocast cputime64_t;
-#ifndef __s390x__
-
-static inline unsigned int
-__div(unsigned long long n, unsigned int base)
+static inline unsigned long __div(unsigned long long n, unsigned long base)
{
+#ifndef __s390x__
register_pair rp;
rp.pair = n >> 1;
asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1));
return rp.subreg.odd;
-}
-
#else /* __s390x__ */
-
-static inline unsigned int
-__div(unsigned long long n, unsigned int base)
-{
return n / base;
+#endif /* __s390x__ */
}
-#endif /* __s390x__ */
-
-#define cputime_zero (0ULL)
#define cputime_one_jiffy jiffies_to_cputime(1)
-#define cputime_max ((~0UL >> 1) - 1)
-#define cputime_add(__a, __b) ((__a) + (__b))
-#define cputime_sub(__a, __b) ((__a) - (__b))
-#define cputime_div(__a, __n) ({ \
- unsigned long long __div = (__a); \
- do_div(__div,__n); \
- __div; \
-})
-#define cputime_halve(__a) ((__a) >> 1)
-#define cputime_eq(__a, __b) ((__a) == (__b))
-#define cputime_gt(__a, __b) ((__a) > (__b))
-#define cputime_ge(__a, __b) ((__a) >= (__b))
-#define cputime_lt(__a, __b) ((__a) < (__b))
-#define cputime_le(__a, __b) ((__a) <= (__b))
-#define cputime_to_jiffies(__ct) (__div((__ct), 4096000000ULL / HZ))
-#define cputime_to_scaled(__ct) (__ct)
-#define jiffies_to_cputime(__hz) ((cputime_t)(__hz) * (4096000000ULL / HZ))
-#define cputime64_zero (0ULL)
-#define cputime64_add(__a, __b) ((__a) + (__b))
-#define cputime_to_cputime64(__ct) (__ct)
-
-static inline u64
-cputime64_to_jiffies64(cputime64_t cputime)
+/*
+ * Convert cputime to jiffies and back.
+ */
+static inline unsigned long cputime_to_jiffies(const cputime_t cputime)
{
- do_div(cputime, 4096000000ULL / HZ);
- return cputime;
+ return __div((__force unsigned long long) cputime, 4096000000ULL / HZ);
+}
+
+static inline cputime_t jiffies_to_cputime(const unsigned int jif)
+{
+ return (__force cputime_t)(jif * (4096000000ULL / HZ));
+}
+
+static inline u64 cputime64_to_jiffies64(cputime64_t cputime)
+{
+ unsigned long long jif = (__force unsigned long long) cputime;
+ do_div(jif, 4096000000ULL / HZ);
+ return jif;
+}
+
+static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
+{
+ return (__force cputime64_t)(jif * (4096000000ULL / HZ));
}
/*
* Convert cputime to microseconds and back.
*/
-static inline unsigned int
-cputime_to_usecs(const cputime_t cputime)
+static inline unsigned int cputime_to_usecs(const cputime_t cputime)
{
- return cputime_div(cputime, 4096);
+ return (__force unsigned long long) cputime >> 12;
}
-static inline cputime_t
-usecs_to_cputime(const unsigned int m)
+static inline cputime_t usecs_to_cputime(const unsigned int m)
{
- return (cputime_t) m * 4096;
+ return (__force cputime_t)(m * 4096ULL);
}
+#define usecs_to_cputime64(m) usecs_to_cputime(m)
+
/*
* Convert cputime to milliseconds and back.
*/
-static inline unsigned int
-cputime_to_secs(const cputime_t cputime)
+static inline unsigned int cputime_to_secs(const cputime_t cputime)
{
- return __div(cputime, 2048000000) >> 1;
+ return __div((__force unsigned long long) cputime, 2048000000) >> 1;
}
-static inline cputime_t
-secs_to_cputime(const unsigned int s)
+static inline cputime_t secs_to_cputime(const unsigned int s)
{
- return (cputime_t) s * 4096000000ULL;
+ return (__force cputime_t)(s * 4096000000ULL);
}
/*
* Convert cputime to timespec and back.
*/
-static inline cputime_t
-timespec_to_cputime(const struct timespec *value)
+static inline cputime_t timespec_to_cputime(const struct timespec *value)
{
- return value->tv_nsec * 4096 / 1000 + (u64) value->tv_sec * 4096000000ULL;
+ unsigned long long ret = value->tv_sec * 4096000000ULL;
+ return (__force cputime_t)(ret + value->tv_nsec * 4096 / 1000);
}
-static inline void
-cputime_to_timespec(const cputime_t cputime, struct timespec *value)
+static inline void cputime_to_timespec(const cputime_t cputime,
+ struct timespec *value)
{
+ unsigned long long __cputime = (__force unsigned long long) cputime;
#ifndef __s390x__
register_pair rp;
- rp.pair = cputime >> 1;
+ rp.pair = __cputime >> 1;
asm ("dr %0,%1" : "+d" (rp) : "d" (2048000000UL));
value->tv_nsec = rp.subreg.even * 1000 / 4096;
value->tv_sec = rp.subreg.odd;
#else
- value->tv_nsec = (cputime % 4096000000ULL) * 1000 / 4096;
- value->tv_sec = cputime / 4096000000ULL;
+ value->tv_nsec = (__cputime % 4096000000ULL) * 1000 / 4096;
+ value->tv_sec = __cputime / 4096000000ULL;
#endif
}
@@ -132,50 +118,52 @@
* Since cputime and timeval have the same resolution (microseconds)
* this is easy.
*/
-static inline cputime_t
-timeval_to_cputime(const struct timeval *value)
+static inline cputime_t timeval_to_cputime(const struct timeval *value)
{
- return value->tv_usec * 4096 + (u64) value->tv_sec * 4096000000ULL;
+ unsigned long long ret = value->tv_sec * 4096000000ULL;
+ return (__force cputime_t)(ret + value->tv_usec * 4096ULL);
}
-static inline void
-cputime_to_timeval(const cputime_t cputime, struct timeval *value)
+static inline void cputime_to_timeval(const cputime_t cputime,
+ struct timeval *value)
{
+ unsigned long long __cputime = (__force unsigned long long) cputime;
#ifndef __s390x__
register_pair rp;
- rp.pair = cputime >> 1;
+ rp.pair = __cputime >> 1;
asm ("dr %0,%1" : "+d" (rp) : "d" (2048000000UL));
value->tv_usec = rp.subreg.even / 4096;
value->tv_sec = rp.subreg.odd;
#else
- value->tv_usec = (cputime % 4096000000ULL) / 4096;
- value->tv_sec = cputime / 4096000000ULL;
+ value->tv_usec = (__cputime % 4096000000ULL) / 4096;
+ value->tv_sec = __cputime / 4096000000ULL;
#endif
}
/*
* Convert cputime to clock and back.
*/
-static inline clock_t
-cputime_to_clock_t(cputime_t cputime)
+static inline clock_t cputime_to_clock_t(cputime_t cputime)
{
- return cputime_div(cputime, 4096000000ULL / USER_HZ);
+ unsigned long long clock = (__force unsigned long long) cputime;
+ do_div(clock, 4096000000ULL / USER_HZ);
+ return clock;
}
-static inline cputime_t
-clock_t_to_cputime(unsigned long x)
+static inline cputime_t clock_t_to_cputime(unsigned long x)
{
- return (cputime_t) x * (4096000000ULL / USER_HZ);
+ return (__force cputime_t)(x * (4096000000ULL / USER_HZ));
}
/*
* Convert cputime64 to clock.
*/
-static inline clock_t
-cputime64_to_clock_t(cputime64_t cputime)
+static inline clock_t cputime64_to_clock_t(cputime64_t cputime)
{
- return cputime_div(cputime, 4096000000ULL / USER_HZ);
+ unsigned long long clock = (__force unsigned long long) cputime;
+ do_div(clock, 4096000000ULL / USER_HZ);
+ return clock;
}
struct s390_idle_data {
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 18124b7..9d88db1 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -73,7 +73,7 @@
struct dentry* debugfs_entries[DEBUG_MAX_VIEWS];
struct debug_view* views[DEBUG_MAX_VIEWS];
char name[DEBUG_MAX_NAME_LEN];
- mode_t mode;
+ umode_t mode;
} debug_info_t;
typedef int (debug_header_proc_t) (debug_info_t* id,
@@ -124,7 +124,7 @@
int buf_size);
debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas,
- int buf_size, mode_t mode, uid_t uid,
+ int buf_size, umode_t mode, uid_t uid,
gid_t gid);
void debug_unregister(debug_info_t* id);
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 524d23b..4f289ff 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -599,10 +599,10 @@
skey = page_get_storage_key(address);
bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
/* Clear page changed & referenced bit in the storage key */
- if (bits) {
- skey ^= bits;
- page_set_storage_key(address, skey, 1);
- }
+ if (bits & _PAGE_CHANGED)
+ page_set_storage_key(address, skey ^ bits, 1);
+ else if (bits)
+ page_reset_referenced(address);
/* Transfer page changed & referenced bit to guest bits in pgste */
pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */
/* Get host changed & referenced bits from pgste */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index fdff1e9..67b5c1b 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -70,4 +70,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index a231834..a730381 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -102,7 +102,6 @@
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 19 /* restore signal mask in do_signal() */
#define TIF_SINGLE_STEP 20 /* This task is single stepped */
-#define TIF_FREEZE 21 /* thread is freezing for suspend */
#define _TIF_SYSCALL (1<<TIF_SYSCALL)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
@@ -119,7 +118,6 @@
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_31BIT (1<<TIF_31BIT)
#define _TIF_SINGLE_STEP (1<<TIF_SINGLE_STEP)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#ifdef CONFIG_64BIT
#define is_32bit_task() (test_thread_flag(TIF_31BIT))
diff --git a/arch/s390/include/asm/types.h b/arch/s390/include/asm/types.h
index eeb52cc..05ebbcd 100644
--- a/arch/s390/include/asm/types.h
+++ b/arch/s390/include/asm/types.h
@@ -13,8 +13,6 @@
#ifndef __ASSEMBLY__
-typedef unsigned short umode_t;
-
/* A address type so that arithmetic can be done on it & it can be upgraded to
64 bit when necessary
*/
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 5ad6bc0..6848828 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -74,7 +74,7 @@
static int debug_open(struct inode *inode, struct file *file);
static int debug_close(struct inode *inode, struct file *file);
static debug_info_t *debug_info_create(const char *name, int pages_per_area,
- int nr_areas, int buf_size, mode_t mode);
+ int nr_areas, int buf_size, umode_t mode);
static void debug_info_get(debug_info_t *);
static void debug_info_put(debug_info_t *);
static int debug_prolog_level_fn(debug_info_t * id,
@@ -330,7 +330,7 @@
static debug_info_t*
debug_info_create(const char *name, int pages_per_area, int nr_areas,
- int buf_size, mode_t mode)
+ int buf_size, umode_t mode)
{
debug_info_t* rc;
@@ -688,7 +688,7 @@
*/
debug_info_t *debug_register_mode(const char *name, int pages_per_area,
- int nr_areas, int buf_size, mode_t mode,
+ int nr_areas, int buf_size, umode_t mode,
uid_t uid, gid_t gid)
{
debug_info_t *rc = NULL;
@@ -1090,7 +1090,7 @@
int rc = 0;
int i;
unsigned long flags;
- mode_t mode;
+ umode_t mode;
struct dentry *pde;
if (!id)
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 9451b21..3201ae4 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -91,10 +91,12 @@
void cpu_idle(void)
{
for (;;) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched())
default_idle();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 450931a..573bc29 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -296,13 +296,6 @@
((data & PSW_MASK_EA) && !(data & PSW_MASK_BA))))
/* Invalid psw mask. */
return -EINVAL;
- if (addr == (addr_t) &dummy->regs.psw.addr)
- /*
- * The debugger changed the instruction address,
- * reset system call restart, see signal.c:do_signal
- */
- task_thread_info(child)->system_call = 0;
-
*(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data;
} else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) {
@@ -614,11 +607,6 @@
/* Transfer 31 bit amode bit to psw mask. */
regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) |
(__u64)(tmp & PSW32_ADDR_AMODE);
- /*
- * The debugger changed the instruction address,
- * reset system call restart, see signal.c:do_signal
- */
- task_thread_info(child)->system_call = 0;
} else {
/* gpr 0-15 */
*(__u32*)((addr_t) ®s->psw + addr*2 + 4) = tmp;
@@ -905,6 +893,14 @@
return 0;
}
+static int s390_last_break_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return 0;
+}
+
#endif
static int s390_system_call_get(struct task_struct *target,
@@ -951,6 +947,7 @@
.size = sizeof(long),
.align = sizeof(long),
.get = s390_last_break_get,
+ .set = s390_last_break_set,
},
#endif
[REGSET_SYSTEM_CALL] = {
@@ -1116,6 +1113,14 @@
return 0;
}
+static int s390_compat_last_break_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return 0;
+}
+
static const struct user_regset s390_compat_regsets[] = {
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
@@ -1139,6 +1144,7 @@
.size = sizeof(long),
.align = sizeof(long),
.get = s390_compat_last_break_get,
+ .set = s390_compat_last_break_set,
},
[REGSET_SYSTEM_CALL] = {
.core_note_type = NT_S390_SYSTEM_CALL,
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index e58a462..f11d1b0 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -21,6 +21,7 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
@@ -579,7 +580,7 @@
*msg = "first memory chunk must be at least crashkernel size";
return 0;
}
- if (is_kdump_kernel() && (crash_size == OLDMEM_SIZE))
+ if (OLDMEM_BASE && crash_size == OLDMEM_SIZE)
return OLDMEM_BASE;
for (i = MEMORY_CHUNKS - 1; i >= 0; i--) {
@@ -820,7 +821,8 @@
end_chunk = min(end_chunk, end_pfn);
if (start_chunk >= end_chunk)
continue;
- add_active_range(0, start_chunk, end_chunk);
+ memblock_add_node(PFN_PHYS(start_chunk),
+ PFN_PHYS(end_chunk - start_chunk), 0);
pfn = max(start_chunk, start_pfn);
for (; pfn < end_chunk; pfn++)
page_set_storage_key(PFN_PHYS(pfn),
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 05a85bc..7f6f9f3 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -460,9 +460,9 @@
regs->svc_code >> 16);
break;
}
- /* No longer in a system call */
- clear_thread_flag(TIF_SYSCALL);
}
+ /* No longer in a system call */
+ clear_thread_flag(TIF_SYSCALL);
if ((is_compat_task() ?
handle_signal32(signr, &ka, &info, oldset, regs) :
@@ -486,6 +486,7 @@
}
/* No handlers present - check for system call restart */
+ clear_thread_flag(TIF_SYSCALL);
if (current_thread_info()->system_call) {
regs->svc_code = current_thread_info()->system_call;
switch (regs->gprs[2]) {
@@ -500,9 +501,6 @@
regs->gprs[2] = regs->orig_gpr2;
set_thread_flag(TIF_SYSCALL);
break;
- default:
- clear_thread_flag(TIF_SYSCALL);
- break;
}
}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 3ea8728..66cca03 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -831,8 +831,8 @@
}
#ifdef CONFIG_HOTPLUG_CPU
-static ssize_t cpu_configure_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t cpu_configure_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
ssize_t count;
@@ -842,8 +842,8 @@
return count;
}
-static ssize_t cpu_configure_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t cpu_configure_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
int cpu = dev->id;
@@ -889,11 +889,11 @@
put_online_cpus();
return rc ? rc : count;
}
-static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
+static DEVICE_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
#endif /* CONFIG_HOTPLUG_CPU */
-static ssize_t cpu_polarization_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t cpu_polarization_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
int cpu = dev->id;
ssize_t count;
@@ -919,22 +919,22 @@
mutex_unlock(&smp_cpu_state_mutex);
return count;
}
-static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
+static DEVICE_ATTR(polarization, 0444, cpu_polarization_show, NULL);
-static ssize_t show_cpu_address(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_cpu_address(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
}
-static SYSDEV_ATTR(address, 0444, show_cpu_address, NULL);
+static DEVICE_ATTR(address, 0444, show_cpu_address, NULL);
static struct attribute *cpu_common_attrs[] = {
#ifdef CONFIG_HOTPLUG_CPU
- &attr_configure.attr,
+ &dev_attr_configure.attr,
#endif
- &attr_address.attr,
- &attr_polarization.attr,
+ &dev_attr_address.attr,
+ &dev_attr_polarization.attr,
NULL,
};
@@ -942,8 +942,8 @@
.attrs = cpu_common_attrs,
};
-static ssize_t show_capability(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_capability(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
unsigned int capability;
int rc;
@@ -953,10 +953,10 @@
return rc;
return sprintf(buf, "%u\n", capability);
}
-static SYSDEV_ATTR(capability, 0444, show_capability, NULL);
+static DEVICE_ATTR(capability, 0444, show_capability, NULL);
-static ssize_t show_idle_count(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_idle_count(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct s390_idle_data *idle;
unsigned long long idle_count;
@@ -976,10 +976,10 @@
goto repeat;
return sprintf(buf, "%llu\n", idle_count);
}
-static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL);
+static DEVICE_ATTR(idle_count, 0444, show_idle_count, NULL);
-static ssize_t show_idle_time(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_idle_time(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct s390_idle_data *idle;
unsigned long long now, idle_time, idle_enter;
@@ -1001,12 +1001,12 @@
goto repeat;
return sprintf(buf, "%llu\n", idle_time >> 12);
}
-static SYSDEV_ATTR(idle_time_us, 0444, show_idle_time, NULL);
+static DEVICE_ATTR(idle_time_us, 0444, show_idle_time, NULL);
static struct attribute *cpu_online_attrs[] = {
- &attr_capability.attr,
- &attr_idle_count.attr,
- &attr_idle_time_us.attr,
+ &dev_attr_capability.attr,
+ &dev_attr_idle_count.attr,
+ &dev_attr_idle_time_us.attr,
NULL,
};
@@ -1019,7 +1019,7 @@
{
unsigned int cpu = (unsigned int)(long)hcpu;
struct cpu *c = &per_cpu(cpu_devices, cpu);
- struct sys_device *s = &c->sysdev;
+ struct device *s = &c->dev;
struct s390_idle_data *idle;
int err = 0;
@@ -1045,7 +1045,7 @@
static int __devinit smp_add_present_cpu(int cpu)
{
struct cpu *c = &per_cpu(cpu_devices, cpu);
- struct sys_device *s = &c->sysdev;
+ struct device *s = &c->dev;
int rc;
c->hotpluggable = 1;
@@ -1098,8 +1098,8 @@
return rc;
}
-static ssize_t __ref rescan_store(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t __ref rescan_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf,
size_t count)
{
@@ -1108,11 +1108,11 @@
rc = smp_rescan_cpus();
return rc ? rc : count;
}
-static SYSDEV_CLASS_ATTR(rescan, 0200, NULL, rescan_store);
+static DEVICE_ATTR(rescan, 0200, NULL, rescan_store);
#endif /* CONFIG_HOTPLUG_CPU */
-static ssize_t dispatching_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t dispatching_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
ssize_t count;
@@ -1123,8 +1123,8 @@
return count;
}
-static ssize_t dispatching_store(struct sysdev_class *dev,
- struct sysdev_class_attribute *attr,
+static ssize_t dispatching_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf,
size_t count)
{
@@ -1148,7 +1148,7 @@
put_online_cpus();
return rc ? rc : count;
}
-static SYSDEV_CLASS_ATTR(dispatching, 0644, dispatching_show,
+static DEVICE_ATTR(dispatching, 0644, dispatching_show,
dispatching_store);
static int __init topology_init(void)
@@ -1159,11 +1159,11 @@
register_cpu_notifier(&smp_cpu_nb);
#ifdef CONFIG_HOTPLUG_CPU
- rc = sysdev_class_create_file(&cpu_sysdev_class, &attr_rescan);
+ rc = device_create_file(cpu_subsys.dev_root, &dev_attr_rescan);
if (rc)
return rc;
#endif
- rc = sysdev_class_create_file(&cpu_sysdev_class, &attr_dispatching);
+ rc = device_create_file(cpu_subsys.dev_root, &dev_attr_dispatching);
if (rc)
return rc;
for_each_present_cpu(cpu) {
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ebbfab3..fa02f44 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -27,7 +27,7 @@
#include <linux/cpu.h>
#include <linux/stop_machine.h>
#include <linux/time.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/smp.h>
@@ -1116,34 +1116,35 @@
/*
* Sysfs interface functions
*/
-static struct sysdev_class etr_sysclass = {
- .name = "etr",
+static struct bus_type etr_subsys = {
+ .name = "etr",
+ .dev_name = "etr",
};
-static struct sys_device etr_port0_dev = {
+static struct device etr_port0_dev = {
.id = 0,
- .cls = &etr_sysclass,
+ .bus = &etr_subsys,
};
-static struct sys_device etr_port1_dev = {
+static struct device etr_port1_dev = {
.id = 1,
- .cls = &etr_sysclass,
+ .bus = &etr_subsys,
};
/*
- * ETR class attributes
+ * ETR subsys attributes
*/
-static ssize_t etr_stepping_port_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t etr_stepping_port_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%i\n", etr_port0.esw.p);
}
-static SYSDEV_CLASS_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL);
+static DEVICE_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL);
-static ssize_t etr_stepping_mode_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t etr_stepping_mode_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
char *mode_str;
@@ -1157,12 +1158,12 @@
return sprintf(buf, "%s\n", mode_str);
}
-static SYSDEV_CLASS_ATTR(stepping_mode, 0400, etr_stepping_mode_show, NULL);
+static DEVICE_ATTR(stepping_mode, 0400, etr_stepping_mode_show, NULL);
/*
* ETR port attributes
*/
-static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
+static inline struct etr_aib *etr_aib_from_dev(struct device *dev)
{
if (dev == &etr_port0_dev)
return etr_port0_online ? &etr_port0 : NULL;
@@ -1170,8 +1171,8 @@
return etr_port1_online ? &etr_port1 : NULL;
}
-static ssize_t etr_online_show(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t etr_online_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
unsigned int online;
@@ -1180,8 +1181,8 @@
return sprintf(buf, "%i\n", online);
}
-static ssize_t etr_online_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t etr_online_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned int value;
@@ -1218,20 +1219,20 @@
return count;
}
-static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
+static DEVICE_ATTR(online, 0600, etr_online_show, etr_online_store);
-static ssize_t etr_stepping_control_show(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t etr_stepping_control_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
etr_eacr.e0 : etr_eacr.e1);
}
-static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
+static DEVICE_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
-static ssize_t etr_mode_code_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_mode_code_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
if (!etr_port0_online && !etr_port1_online)
/* Status word is not uptodate if both ports are offline. */
@@ -1240,10 +1241,10 @@
etr_port0.esw.psc0 : etr_port0.esw.psc1);
}
-static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
+static DEVICE_ATTR(state_code, 0400, etr_mode_code_show, NULL);
-static ssize_t etr_untuned_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_untuned_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
@@ -1252,10 +1253,10 @@
return sprintf(buf, "%i\n", aib->edf1.u);
}
-static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
+static DEVICE_ATTR(untuned, 0400, etr_untuned_show, NULL);
-static ssize_t etr_network_id_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_network_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
@@ -1264,10 +1265,10 @@
return sprintf(buf, "%i\n", aib->edf1.net_id);
}
-static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
+static DEVICE_ATTR(network, 0400, etr_network_id_show, NULL);
-static ssize_t etr_id_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
@@ -1276,10 +1277,10 @@
return sprintf(buf, "%i\n", aib->edf1.etr_id);
}
-static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
+static DEVICE_ATTR(id, 0400, etr_id_show, NULL);
-static ssize_t etr_port_number_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_port_number_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
@@ -1288,10 +1289,10 @@
return sprintf(buf, "%i\n", aib->edf1.etr_pn);
}
-static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
+static DEVICE_ATTR(port, 0400, etr_port_number_show, NULL);
-static ssize_t etr_coupled_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_coupled_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
@@ -1300,10 +1301,10 @@
return sprintf(buf, "%i\n", aib->edf3.c);
}
-static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
+static DEVICE_ATTR(coupled, 0400, etr_coupled_show, NULL);
-static ssize_t etr_local_time_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_local_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
@@ -1312,10 +1313,10 @@
return sprintf(buf, "%i\n", aib->edf3.blto);
}
-static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
+static DEVICE_ATTR(local_time, 0400, etr_local_time_show, NULL);
-static ssize_t etr_utc_offset_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_utc_offset_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
@@ -1324,64 +1325,64 @@
return sprintf(buf, "%i\n", aib->edf3.buo);
}
-static SYSDEV_ATTR(utc_offset, 0400, etr_utc_offset_show, NULL);
+static DEVICE_ATTR(utc_offset, 0400, etr_utc_offset_show, NULL);
-static struct sysdev_attribute *etr_port_attributes[] = {
- &attr_online,
- &attr_stepping_control,
- &attr_state_code,
- &attr_untuned,
- &attr_network,
- &attr_id,
- &attr_port,
- &attr_coupled,
- &attr_local_time,
- &attr_utc_offset,
+static struct device_attribute *etr_port_attributes[] = {
+ &dev_attr_online,
+ &dev_attr_stepping_control,
+ &dev_attr_state_code,
+ &dev_attr_untuned,
+ &dev_attr_network,
+ &dev_attr_id,
+ &dev_attr_port,
+ &dev_attr_coupled,
+ &dev_attr_local_time,
+ &dev_attr_utc_offset,
NULL
};
-static int __init etr_register_port(struct sys_device *dev)
+static int __init etr_register_port(struct device *dev)
{
- struct sysdev_attribute **attr;
+ struct device_attribute **attr;
int rc;
- rc = sysdev_register(dev);
+ rc = device_register(dev);
if (rc)
goto out;
for (attr = etr_port_attributes; *attr; attr++) {
- rc = sysdev_create_file(dev, *attr);
+ rc = device_create_file(dev, *attr);
if (rc)
goto out_unreg;
}
return 0;
out_unreg:
for (; attr >= etr_port_attributes; attr--)
- sysdev_remove_file(dev, *attr);
- sysdev_unregister(dev);
+ device_remove_file(dev, *attr);
+ device_unregister(dev);
out:
return rc;
}
-static void __init etr_unregister_port(struct sys_device *dev)
+static void __init etr_unregister_port(struct device *dev)
{
- struct sysdev_attribute **attr;
+ struct device_attribute **attr;
for (attr = etr_port_attributes; *attr; attr++)
- sysdev_remove_file(dev, *attr);
- sysdev_unregister(dev);
+ device_remove_file(dev, *attr);
+ device_unregister(dev);
}
static int __init etr_init_sysfs(void)
{
int rc;
- rc = sysdev_class_register(&etr_sysclass);
+ rc = subsys_system_register(&etr_subsys, NULL);
if (rc)
goto out;
- rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_port);
+ rc = device_create_file(etr_subsys.dev_root, &dev_attr_stepping_port);
if (rc)
- goto out_unreg_class;
- rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_mode);
+ goto out_unreg_subsys;
+ rc = device_create_file(etr_subsys.dev_root, &dev_attr_stepping_mode);
if (rc)
goto out_remove_stepping_port;
rc = etr_register_port(&etr_port0_dev);
@@ -1395,11 +1396,11 @@
out_remove_port0:
etr_unregister_port(&etr_port0_dev);
out_remove_stepping_mode:
- sysdev_class_remove_file(&etr_sysclass, &attr_stepping_mode);
+ device_remove_file(etr_subsys.dev_root, &dev_attr_stepping_mode);
out_remove_stepping_port:
- sysdev_class_remove_file(&etr_sysclass, &attr_stepping_port);
-out_unreg_class:
- sysdev_class_unregister(&etr_sysclass);
+ device_remove_file(etr_subsys.dev_root, &dev_attr_stepping_port);
+out_unreg_subsys:
+ bus_unregister(&etr_subsys);
out:
return rc;
}
@@ -1599,14 +1600,15 @@
}
/*
- * STP class sysfs interface functions
+ * STP subsys sysfs interface functions
*/
-static struct sysdev_class stp_sysclass = {
- .name = "stp",
+static struct bus_type stp_subsys = {
+ .name = "stp",
+ .dev_name = "stp",
};
-static ssize_t stp_ctn_id_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_ctn_id_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online)
@@ -1615,10 +1617,10 @@
*(unsigned long long *) stp_info.ctnid);
}
-static SYSDEV_CLASS_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
+static DEVICE_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
-static ssize_t stp_ctn_type_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_ctn_type_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online)
@@ -1626,10 +1628,10 @@
return sprintf(buf, "%i\n", stp_info.ctn);
}
-static SYSDEV_CLASS_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
+static DEVICE_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
-static ssize_t stp_dst_offset_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_dst_offset_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online || !(stp_info.vbits & 0x2000))
@@ -1637,10 +1639,10 @@
return sprintf(buf, "%i\n", (int)(s16) stp_info.dsto);
}
-static SYSDEV_CLASS_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
+static DEVICE_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
-static ssize_t stp_leap_seconds_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_leap_seconds_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online || !(stp_info.vbits & 0x8000))
@@ -1648,10 +1650,10 @@
return sprintf(buf, "%i\n", (int)(s16) stp_info.leaps);
}
-static SYSDEV_CLASS_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
+static DEVICE_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
-static ssize_t stp_stratum_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_stratum_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online)
@@ -1659,10 +1661,10 @@
return sprintf(buf, "%i\n", (int)(s16) stp_info.stratum);
}
-static SYSDEV_CLASS_ATTR(stratum, 0400, stp_stratum_show, NULL);
+static DEVICE_ATTR(stratum, 0400, stp_stratum_show, NULL);
-static ssize_t stp_time_offset_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_time_offset_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online || !(stp_info.vbits & 0x0800))
@@ -1670,10 +1672,10 @@
return sprintf(buf, "%i\n", (int) stp_info.tto);
}
-static SYSDEV_CLASS_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
+static DEVICE_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
-static ssize_t stp_time_zone_offset_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_time_zone_offset_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online || !(stp_info.vbits & 0x4000))
@@ -1681,11 +1683,11 @@
return sprintf(buf, "%i\n", (int)(s16) stp_info.tzo);
}
-static SYSDEV_CLASS_ATTR(time_zone_offset, 0400,
+static DEVICE_ATTR(time_zone_offset, 0400,
stp_time_zone_offset_show, NULL);
-static ssize_t stp_timing_mode_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_timing_mode_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online)
@@ -1693,10 +1695,10 @@
return sprintf(buf, "%i\n", stp_info.tmd);
}
-static SYSDEV_CLASS_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
+static DEVICE_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
-static ssize_t stp_timing_state_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_timing_state_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
if (!stp_online)
@@ -1704,17 +1706,17 @@
return sprintf(buf, "%i\n", stp_info.tst);
}
-static SYSDEV_CLASS_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
+static DEVICE_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
-static ssize_t stp_online_show(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_online_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%i\n", stp_online);
}
-static ssize_t stp_online_store(struct sysdev_class *class,
- struct sysdev_class_attribute *attr,
+static ssize_t stp_online_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned int value;
@@ -1736,47 +1738,47 @@
}
/*
- * Can't use SYSDEV_CLASS_ATTR because the attribute should be named
- * stp/online but attr_online already exists in this file ..
+ * Can't use DEVICE_ATTR because the attribute should be named
+ * stp/online but dev_attr_online already exists in this file ..
*/
-static struct sysdev_class_attribute attr_stp_online = {
+static struct device_attribute dev_attr_stp_online = {
.attr = { .name = "online", .mode = 0600 },
.show = stp_online_show,
.store = stp_online_store,
};
-static struct sysdev_class_attribute *stp_attributes[] = {
- &attr_ctn_id,
- &attr_ctn_type,
- &attr_dst_offset,
- &attr_leap_seconds,
- &attr_stp_online,
- &attr_stratum,
- &attr_time_offset,
- &attr_time_zone_offset,
- &attr_timing_mode,
- &attr_timing_state,
+static struct device_attribute *stp_attributes[] = {
+ &dev_attr_ctn_id,
+ &dev_attr_ctn_type,
+ &dev_attr_dst_offset,
+ &dev_attr_leap_seconds,
+ &dev_attr_stp_online,
+ &dev_attr_stratum,
+ &dev_attr_time_offset,
+ &dev_attr_time_zone_offset,
+ &dev_attr_timing_mode,
+ &dev_attr_timing_state,
NULL
};
static int __init stp_init_sysfs(void)
{
- struct sysdev_class_attribute **attr;
+ struct device_attribute **attr;
int rc;
- rc = sysdev_class_register(&stp_sysclass);
+ rc = subsys_system_register(&stp_subsys, NULL);
if (rc)
goto out;
for (attr = stp_attributes; *attr; attr++) {
- rc = sysdev_class_create_file(&stp_sysclass, *attr);
+ rc = device_create_file(stp_subsys.dev_root, *attr);
if (rc)
goto out_unreg;
}
return 0;
out_unreg:
for (; attr >= stp_attributes; attr--)
- sysdev_class_remove_file(&stp_sysclass, *attr);
- sysdev_class_unregister(&stp_sysclass);
+ device_remove_file(stp_subsys.dev_root, *attr);
+ bus_unregister(&stp_subsys);
out:
return rc;
}
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index fdb5b8c..6e0e29b 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -261,7 +261,7 @@
int arch_update_cpu_topology(void)
{
struct sysinfo_15_1_x *info = tl_info;
- struct sys_device *sysdev;
+ struct device *dev;
int cpu;
if (!MACHINE_HAS_TOPOLOGY) {
@@ -273,8 +273,8 @@
tl_to_cores(info);
update_cpu_core_map();
for_each_online_cpu(cpu) {
- sysdev = get_cpu_sysdev(cpu);
- kobject_uevent(&sysdev->kobj, KOBJ_CHANGE);
+ dev = get_cpu_device(cpu);
+ kobject_uevent(&dev->kobj, KOBJ_CHANGE);
}
return 1;
}
diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c
index f43c0e4..9daee91 100644
--- a/arch/s390/oprofile/hwsampler.c
+++ b/arch/s390/oprofile/hwsampler.c
@@ -22,6 +22,7 @@
#include <asm/irq.h>
#include "hwsampler.h"
+#include "op_counter.h"
#define MAX_NUM_SDB 511
#define MIN_NUM_SDB 1
@@ -896,6 +897,8 @@
if (sample_data_ptr->P == 1) {
/* userspace sample */
unsigned int pid = sample_data_ptr->prim_asn;
+ if (!counter_config.user)
+ goto skip_sample;
rcu_read_lock();
tsk = pid_task(find_vpid(pid), PIDTYPE_PID);
if (tsk)
@@ -903,6 +906,8 @@
rcu_read_unlock();
} else {
/* kernelspace sample */
+ if (!counter_config.kernel)
+ goto skip_sample;
regs = task_pt_regs(current);
}
@@ -910,7 +915,7 @@
oprofile_add_ext_hw_sample(sample_data_ptr->ia, regs, 0,
!sample_data_ptr->P, tsk);
mutex_unlock(&hws_sem);
-
+ skip_sample:
sample_data_ptr++;
}
}
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index 6efc18b..2297be4 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -2,10 +2,11 @@
* arch/s390/oprofile/init.c
*
* S390 Version
- * Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002-2011 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Thomas Spatzier (tspat@de.ibm.com)
* Author(s): Mahesh Salgaonkar (mahesh@linux.vnet.ibm.com)
* Author(s): Heinz Graalfs (graalfs@linux.vnet.ibm.com)
+ * Author(s): Andreas Krebbel (krebbel@linux.vnet.ibm.com)
*
* @remark Copyright 2002-2011 OProfile authors
*/
@@ -14,6 +15,8 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/module.h>
+#include <asm/processor.h>
#include "../../../drivers/oprofile/oprof.h"
@@ -22,6 +25,7 @@
#ifdef CONFIG_64BIT
#include "hwsampler.h"
+#include "op_counter.h"
#define DEFAULT_INTERVAL 4127518
@@ -35,16 +39,41 @@
static unsigned long oprofile_sdbt_blocks = DEFAULT_SDBT_BLOCKS;
static unsigned long oprofile_sdb_blocks = DEFAULT_SDB_BLOCKS;
-static int hwsampler_file;
+static int hwsampler_enabled;
static int hwsampler_running; /* start_mutex must be held to change */
+static int hwsampler_available;
static struct oprofile_operations timer_ops;
+struct op_counter_config counter_config;
+
+enum __force_cpu_type {
+ reserved = 0, /* do not force */
+ timer,
+};
+static int force_cpu_type;
+
+static int set_cpu_type(const char *str, struct kernel_param *kp)
+{
+ if (!strcmp(str, "timer")) {
+ force_cpu_type = timer;
+ printk(KERN_INFO "oprofile: forcing timer to be returned "
+ "as cpu type\n");
+ } else {
+ force_cpu_type = 0;
+ }
+
+ return 0;
+}
+module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0);
+MODULE_PARM_DESC(cpu_type, "Force legacy basic mode sampling"
+ "(report cpu_type \"timer\"");
+
static int oprofile_hwsampler_start(void)
{
int retval;
- hwsampler_running = hwsampler_file;
+ hwsampler_running = hwsampler_enabled;
if (!hwsampler_running)
return timer_ops.start();
@@ -72,10 +101,16 @@
return;
}
+/*
+ * File ops used for:
+ * /dev/oprofile/0/enabled
+ * /dev/oprofile/hwsampling/hwsampler (cpu_type = timer)
+ */
+
static ssize_t hwsampler_read(struct file *file, char __user *buf,
size_t count, loff_t *offset)
{
- return oprofilefs_ulong_to_user(hwsampler_file, buf, count, offset);
+ return oprofilefs_ulong_to_user(hwsampler_enabled, buf, count, offset);
}
static ssize_t hwsampler_write(struct file *file, char const __user *buf,
@@ -88,9 +123,12 @@
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
if (oprofile_started)
/*
* save to do without locking as we set
@@ -99,7 +137,7 @@
*/
return -EBUSY;
- hwsampler_file = val;
+ hwsampler_enabled = val;
return count;
}
@@ -109,38 +147,311 @@
.write = hwsampler_write,
};
-static int oprofile_create_hwsampling_files(struct super_block *sb,
- struct dentry *root)
+/*
+ * File ops used for:
+ * /dev/oprofile/0/count
+ * /dev/oprofile/hwsampling/hw_interval (cpu_type = timer)
+ *
+ * Make sure that the value is within the hardware range.
+ */
+
+static ssize_t hw_interval_read(struct file *file, char __user *buf,
+ size_t count, loff_t *offset)
{
- struct dentry *hw_dir;
+ return oprofilefs_ulong_to_user(oprofile_hw_interval, buf,
+ count, offset);
+}
- /* reinitialize default values */
- hwsampler_file = 1;
+static ssize_t hw_interval_write(struct file *file, char const __user *buf,
+ size_t count, loff_t *offset)
+{
+ unsigned long val;
+ int retval;
- hw_dir = oprofilefs_mkdir(sb, root, "hwsampling");
- if (!hw_dir)
+ if (*offset)
+ return -EINVAL;
+ retval = oprofilefs_ulong_from_user(&val, buf, count);
+ if (retval)
+ return retval;
+ if (val < oprofile_min_interval)
+ oprofile_hw_interval = oprofile_min_interval;
+ else if (val > oprofile_max_interval)
+ oprofile_hw_interval = oprofile_max_interval;
+ else
+ oprofile_hw_interval = val;
+
+ return count;
+}
+
+static const struct file_operations hw_interval_fops = {
+ .read = hw_interval_read,
+ .write = hw_interval_write,
+};
+
+/*
+ * File ops used for:
+ * /dev/oprofile/0/event
+ * Only a single event with number 0 is supported with this counter.
+ *
+ * /dev/oprofile/0/unit_mask
+ * This is a dummy file needed by the user space tools.
+ * No value other than 0 is accepted or returned.
+ */
+
+static ssize_t hwsampler_zero_read(struct file *file, char __user *buf,
+ size_t count, loff_t *offset)
+{
+ return oprofilefs_ulong_to_user(0, buf, count, offset);
+}
+
+static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf,
+ size_t count, loff_t *offset)
+{
+ unsigned long val;
+ int retval;
+
+ if (*offset)
return -EINVAL;
- oprofilefs_create_file(sb, hw_dir, "hwsampler", &hwsampler_fops);
- oprofilefs_create_ulong(sb, hw_dir, "hw_interval",
- &oprofile_hw_interval);
- oprofilefs_create_ro_ulong(sb, hw_dir, "hw_min_interval",
- &oprofile_min_interval);
- oprofilefs_create_ro_ulong(sb, hw_dir, "hw_max_interval",
- &oprofile_max_interval);
- oprofilefs_create_ulong(sb, hw_dir, "hw_sdbt_blocks",
- &oprofile_sdbt_blocks);
+ retval = oprofilefs_ulong_from_user(&val, buf, count);
+ if (retval)
+ return retval;
+ if (val != 0)
+ return -EINVAL;
+ return count;
+}
+static const struct file_operations zero_fops = {
+ .read = hwsampler_zero_read,
+ .write = hwsampler_zero_write,
+};
+
+/* /dev/oprofile/0/kernel file ops. */
+
+static ssize_t hwsampler_kernel_read(struct file *file, char __user *buf,
+ size_t count, loff_t *offset)
+{
+ return oprofilefs_ulong_to_user(counter_config.kernel,
+ buf, count, offset);
+}
+
+static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf,
+ size_t count, loff_t *offset)
+{
+ unsigned long val;
+ int retval;
+
+ if (*offset)
+ return -EINVAL;
+
+ retval = oprofilefs_ulong_from_user(&val, buf, count);
+ if (retval)
+ return retval;
+
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ counter_config.kernel = val;
+
+ return count;
+}
+
+static const struct file_operations kernel_fops = {
+ .read = hwsampler_kernel_read,
+ .write = hwsampler_kernel_write,
+};
+
+/* /dev/oprofile/0/user file ops. */
+
+static ssize_t hwsampler_user_read(struct file *file, char __user *buf,
+ size_t count, loff_t *offset)
+{
+ return oprofilefs_ulong_to_user(counter_config.user,
+ buf, count, offset);
+}
+
+static ssize_t hwsampler_user_write(struct file *file, char const __user *buf,
+ size_t count, loff_t *offset)
+{
+ unsigned long val;
+ int retval;
+
+ if (*offset)
+ return -EINVAL;
+
+ retval = oprofilefs_ulong_from_user(&val, buf, count);
+ if (retval)
+ return retval;
+
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ counter_config.user = val;
+
+ return count;
+}
+
+static const struct file_operations user_fops = {
+ .read = hwsampler_user_read,
+ .write = hwsampler_user_write,
+};
+
+
+/*
+ * File ops used for: /dev/oprofile/timer/enabled
+ * The value always has to be the inverted value of hwsampler_enabled. So
+ * no separate variable is created. That way we do not need locking.
+ */
+
+static ssize_t timer_enabled_read(struct file *file, char __user *buf,
+ size_t count, loff_t *offset)
+{
+ return oprofilefs_ulong_to_user(!hwsampler_enabled, buf, count, offset);
+}
+
+static ssize_t timer_enabled_write(struct file *file, char const __user *buf,
+ size_t count, loff_t *offset)
+{
+ unsigned long val;
+ int retval;
+
+ if (*offset)
+ return -EINVAL;
+
+ retval = oprofilefs_ulong_from_user(&val, buf, count);
+ if (retval)
+ return retval;
+
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ /* Timer cannot be disabled without having hardware sampling. */
+ if (val == 0 && !hwsampler_available)
+ return -EINVAL;
+
+ if (oprofile_started)
+ /*
+ * save to do without locking as we set
+ * hwsampler_running in start() when start_mutex is
+ * held
+ */
+ return -EBUSY;
+
+ hwsampler_enabled = !val;
+
+ return count;
+}
+
+static const struct file_operations timer_enabled_fops = {
+ .read = timer_enabled_read,
+ .write = timer_enabled_write,
+};
+
+
+static int oprofile_create_hwsampling_files(struct super_block *sb,
+ struct dentry *root)
+{
+ struct dentry *dir;
+
+ dir = oprofilefs_mkdir(sb, root, "timer");
+ if (!dir)
+ return -EINVAL;
+
+ oprofilefs_create_file(sb, dir, "enabled", &timer_enabled_fops);
+
+ if (!hwsampler_available)
+ return 0;
+
+ /* reinitialize default values */
+ hwsampler_enabled = 1;
+ counter_config.kernel = 1;
+ counter_config.user = 1;
+
+ if (!force_cpu_type) {
+ /*
+ * Create the counter file system. A single virtual
+ * counter is created which can be used to
+ * enable/disable hardware sampling dynamically from
+ * user space. The user space will configure a single
+ * counter with a single event. The value of 'event'
+ * and 'unit_mask' are not evaluated by the kernel code
+ * and can only be set to 0.
+ */
+
+ dir = oprofilefs_mkdir(sb, root, "0");
+ if (!dir)
+ return -EINVAL;
+
+ oprofilefs_create_file(sb, dir, "enabled", &hwsampler_fops);
+ oprofilefs_create_file(sb, dir, "event", &zero_fops);
+ oprofilefs_create_file(sb, dir, "count", &hw_interval_fops);
+ oprofilefs_create_file(sb, dir, "unit_mask", &zero_fops);
+ oprofilefs_create_file(sb, dir, "kernel", &kernel_fops);
+ oprofilefs_create_file(sb, dir, "user", &user_fops);
+ oprofilefs_create_ulong(sb, dir, "hw_sdbt_blocks",
+ &oprofile_sdbt_blocks);
+
+ } else {
+ /*
+ * Hardware sampling can be used but the cpu_type is
+ * forced to timer in order to deal with legacy user
+ * space tools. The /dev/oprofile/hwsampling fs is
+ * provided in that case.
+ */
+ dir = oprofilefs_mkdir(sb, root, "hwsampling");
+ if (!dir)
+ return -EINVAL;
+
+ oprofilefs_create_file(sb, dir, "hwsampler",
+ &hwsampler_fops);
+ oprofilefs_create_file(sb, dir, "hw_interval",
+ &hw_interval_fops);
+ oprofilefs_create_ro_ulong(sb, dir, "hw_min_interval",
+ &oprofile_min_interval);
+ oprofilefs_create_ro_ulong(sb, dir, "hw_max_interval",
+ &oprofile_max_interval);
+ oprofilefs_create_ulong(sb, dir, "hw_sdbt_blocks",
+ &oprofile_sdbt_blocks);
+ }
return 0;
}
static int oprofile_hwsampler_init(struct oprofile_operations *ops)
{
+ /*
+ * Initialize the timer mode infrastructure as well in order
+ * to be able to switch back dynamically. oprofile_timer_init
+ * is not supposed to fail.
+ */
+ if (oprofile_timer_init(ops))
+ BUG();
+
+ memcpy(&timer_ops, ops, sizeof(timer_ops));
+ ops->create_files = oprofile_create_hwsampling_files;
+
+ /*
+ * If the user space tools do not support newer cpu types,
+ * the force_cpu_type module parameter
+ * can be used to always return \"timer\" as cpu type.
+ */
+ if (force_cpu_type != timer) {
+ struct cpuid id;
+
+ get_cpu_id (&id);
+
+ switch (id.machine) {
+ case 0x2097: case 0x2098: ops->cpu_type = "s390/z10"; break;
+ case 0x2817: case 0x2818: ops->cpu_type = "s390/z196"; break;
+ default: return -ENODEV;
+ }
+ }
+
if (hwsampler_setup())
return -ENODEV;
/*
- * create hwsampler files only if hwsampler_setup() succeeds.
+ * Query the range for the sampling interval from the
+ * hardware.
*/
oprofile_min_interval = hwsampler_query_min_interval();
if (oprofile_min_interval == 0)
@@ -155,23 +466,17 @@
if (oprofile_hw_interval > oprofile_max_interval)
oprofile_hw_interval = oprofile_max_interval;
- if (oprofile_timer_init(ops))
- return -ENODEV;
-
- printk(KERN_INFO "oprofile: using hardware sampling\n");
-
- memcpy(&timer_ops, ops, sizeof(timer_ops));
+ printk(KERN_INFO "oprofile: System z hardware sampling "
+ "facility found.\n");
ops->start = oprofile_hwsampler_start;
ops->stop = oprofile_hwsampler_stop;
- ops->create_files = oprofile_create_hwsampling_files;
return 0;
}
static void oprofile_hwsampler_exit(void)
{
- oprofile_timer_exit();
hwsampler_shutdown();
}
@@ -182,7 +487,15 @@
ops->backtrace = s390_backtrace;
#ifdef CONFIG_64BIT
- return oprofile_hwsampler_init(ops);
+
+ /*
+ * -ENODEV is not reported to the caller. The module itself
+ * will use the timer mode sampling as fallback and this is
+ * always available.
+ */
+ hwsampler_available = oprofile_hwsampler_init(ops) == 0;
+
+ return 0;
#else
return -ENODEV;
#endif
diff --git a/arch/s390/oprofile/op_counter.h b/arch/s390/oprofile/op_counter.h
new file mode 100644
index 0000000..1a8d3ca
--- /dev/null
+++ b/arch/s390/oprofile/op_counter.h
@@ -0,0 +1,23 @@
+/**
+ * arch/s390/oprofile/op_counter.h
+ *
+ * Copyright (C) 2011 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s): Andreas Krebbel (krebbel@linux.vnet.ibm.com)
+ *
+ * @remark Copyright 2011 OProfile authors
+ */
+
+#ifndef OP_COUNTER_H
+#define OP_COUNTER_H
+
+struct op_counter_config {
+ /* `enabled' maps to the hwsampler_file variable. */
+ /* `count' maps to the oprofile_hw_interval variable. */
+ /* `event' and `unit_mask' are unused. */
+ unsigned long kernel;
+ unsigned long user;
+};
+
+extern struct op_counter_config counter_config;
+
+#endif /* OP_COUNTER_H */
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index df169e8..8b0c946 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -4,6 +4,9 @@
def_bool y
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
choice
prompt "System type"
@@ -60,9 +63,6 @@
config ARCH_FLATMEM_ENABLE
def_bool y
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
source "mm/Kconfig"
config MEMORY_START
diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c
index 6f898c0..b48459a 100644
--- a/arch/score/kernel/setup.c
+++ b/arch/score/kernel/setup.c
@@ -26,6 +26,7 @@
#include <linux/bootmem.h>
#include <linux/initrd.h>
#include <linux/ioport.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/screen_info.h>
@@ -54,7 +55,8 @@
/* Initialize the boot-time allocator with low memory only. */
bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
min_low_pfn, max_low_pfn);
- add_active_range(0, min_low_pfn, max_low_pfn);
+ memblock_add_node(PFN_PHYS(min_low_pfn),
+ PFN_PHYS(max_low_pfn - min_low_pfn), 0);
free_bootmem(PFN_PHYS(start_pfn),
(max_low_pfn - start_pfn) << PAGE_SHIFT);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5629e20..47a2f1c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -4,6 +4,7 @@
select CLKDEV_LOOKUP
select HAVE_IDE if HAS_IOPORT
select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
select HAVE_OPROFILE
select HAVE_GENERIC_DMA_COHERENT
select HAVE_ARCH_TRACEHOOK
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 83cc704..b1cb271 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -12,18 +12,19 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/stat.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/string.h>
#include <asm/dma.h>
-static struct sysdev_class dma_sysclass = {
+static struct bus_type dma_subsys = {
.name = "dma",
+ .dev_name = "dma",
};
-static ssize_t dma_show_devices(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t dma_show_devices(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
ssize_t len = 0;
int i;
@@ -43,29 +44,29 @@
return len;
}
-static SYSDEV_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
+static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
-static int __init dma_sysclass_init(void)
+static int __init dma_subsys_init(void)
{
int ret;
- ret = sysdev_class_register(&dma_sysclass);
+ ret = subsys_system_register(&dma_subsys, NULL);
if (unlikely(ret))
return ret;
- return sysfs_create_file(&dma_sysclass.kset.kobj, &attr_devices.attr);
+ return device_create_file(dma_subsys.dev_root, &dev_attr_devices.attr);
}
-postcore_initcall(dma_sysclass_init);
+postcore_initcall(dma_subsys_init);
-static ssize_t dma_show_dev_id(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t dma_show_dev_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct dma_channel *channel = to_dma_channel(dev);
return sprintf(buf, "%s\n", channel->dev_id);
}
-static ssize_t dma_store_dev_id(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t dma_store_dev_id(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
struct dma_channel *channel = to_dma_channel(dev);
@@ -73,10 +74,10 @@
return count;
}
-static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
+static DEVICE_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
-static ssize_t dma_store_config(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t dma_store_config(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
struct dma_channel *channel = to_dma_channel(dev);
@@ -88,17 +89,17 @@
return count;
}
-static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config);
+static DEVICE_ATTR(config, S_IWUSR, NULL, dma_store_config);
-static ssize_t dma_show_mode(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t dma_show_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct dma_channel *channel = to_dma_channel(dev);
return sprintf(buf, "0x%08x\n", channel->mode);
}
-static ssize_t dma_store_mode(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t dma_store_mode(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
struct dma_channel *channel = to_dma_channel(dev);
@@ -106,38 +107,38 @@
return count;
}
-static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
#define dma_ro_attr(field, fmt) \
-static ssize_t dma_show_##field(struct sys_device *dev, \
- struct sysdev_attribute *attr, char *buf)\
+static ssize_t dma_show_##field(struct device *dev, \
+ struct device_attribute *attr, char *buf)\
{ \
struct dma_channel *channel = to_dma_channel(dev); \
return sprintf(buf, fmt, channel->field); \
} \
-static SYSDEV_ATTR(field, S_IRUGO, dma_show_##field, NULL);
+static DEVICE_ATTR(field, S_IRUGO, dma_show_##field, NULL);
dma_ro_attr(count, "0x%08x\n");
dma_ro_attr(flags, "0x%08lx\n");
int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
{
- struct sys_device *dev = &chan->dev;
+ struct device *dev = &chan->dev;
char name[16];
int ret;
dev->id = chan->vchan;
- dev->cls = &dma_sysclass;
+ dev->bus = &dma_subsys;
- ret = sysdev_register(dev);
+ ret = device_register(dev);
if (ret)
return ret;
- ret |= sysdev_create_file(dev, &attr_dev_id);
- ret |= sysdev_create_file(dev, &attr_count);
- ret |= sysdev_create_file(dev, &attr_mode);
- ret |= sysdev_create_file(dev, &attr_flags);
- ret |= sysdev_create_file(dev, &attr_config);
+ ret |= device_create_file(dev, &dev_attr_dev_id);
+ ret |= device_create_file(dev, &dev_attr_count);
+ ret |= device_create_file(dev, &dev_attr_mode);
+ ret |= device_create_file(dev, &dev_attr_flags);
+ ret |= device_create_file(dev, &dev_attr_config);
if (unlikely(ret)) {
dev_err(&info->pdev->dev, "Failed creating attrs\n");
@@ -150,17 +151,17 @@
void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
{
- struct sys_device *dev = &chan->dev;
+ struct device *dev = &chan->dev;
char name[16];
- sysdev_remove_file(dev, &attr_dev_id);
- sysdev_remove_file(dev, &attr_count);
- sysdev_remove_file(dev, &attr_mode);
- sysdev_remove_file(dev, &attr_flags);
- sysdev_remove_file(dev, &attr_config);
+ device_remove_file(dev, &dev_attr_dev_id);
+ device_remove_file(dev, &dev_attr_count);
+ device_remove_file(dev, &dev_attr_mode);
+ device_remove_file(dev, &dev_attr_flags);
+ device_remove_file(dev, &dev_attr_config);
snprintf(name, sizeof(name), "dma%d", chan->chan);
sysfs_remove_link(&info->pdev->dev.kobj, name);
- sysdev_unregister(dev);
+ device_unregister(dev);
}
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
index 07373a0..6aa2080 100644
--- a/arch/sh/include/asm/dma.h
+++ b/arch/sh/include/asm/dma.h
@@ -14,7 +14,7 @@
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/sched.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <cpu/dma.h>
#include <asm-generic/dma.h>
@@ -91,7 +91,7 @@
wait_queue_head_t wait_queue;
- struct sys_device dev;
+ struct device dev;
void *priv_data;
};
diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h
deleted file mode 100644
index e87063f..0000000
--- a/arch/sh/include/asm/memblock.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SH_MEMBLOCK_H
-#define __ASM_SH_MEMBLOCK_H
-
-#endif /* __ASM_SH_MEMBLOCK_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index ea2d508..20ee40a 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -122,7 +122,6 @@
#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
-#define TIF_FREEZE 19 /* Freezing for suspend */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
@@ -133,7 +132,6 @@
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
/*
* _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or we
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index f090799..a8140f0 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/bitmap.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -337,9 +337,9 @@
.default_attrs = sq_sysfs_attrs,
};
-static int __devinit sq_sysdev_add(struct sys_device *sysdev)
+static int __devinit sq_dev_add(struct device *dev)
{
- unsigned int cpu = sysdev->id;
+ unsigned int cpu = dev->id;
struct kobject *kobj;
int error;
@@ -348,25 +348,27 @@
return -ENOMEM;
kobj = sq_kobject[cpu];
- error = kobject_init_and_add(kobj, &ktype_percpu_entry, &sysdev->kobj,
+ error = kobject_init_and_add(kobj, &ktype_percpu_entry, &dev->kobj,
"%s", "sq");
if (!error)
kobject_uevent(kobj, KOBJ_ADD);
return error;
}
-static int __devexit sq_sysdev_remove(struct sys_device *sysdev)
+static int __devexit sq_dev_remove(struct device *dev)
{
- unsigned int cpu = sysdev->id;
+ unsigned int cpu = dev->id;
struct kobject *kobj = sq_kobject[cpu];
kobject_put(kobj);
return 0;
}
-static struct sysdev_driver sq_sysdev_driver = {
- .add = sq_sysdev_add,
- .remove = __devexit_p(sq_sysdev_remove),
+static struct subsys_interface sq_interface = {
+ .name = "sq"
+ .subsys = &cpu_subsys,
+ .add_dev = sq_dev_add,
+ .remove_dev = __devexit_p(sq_dev_remove),
};
static int __init sq_api_init(void)
@@ -386,7 +388,7 @@
if (unlikely(!sq_bitmap))
goto out;
- ret = sysdev_driver_register(&cpu_sysdev_class, &sq_sysdev_driver);
+ ret = subsys_interface_register(&sq_interface);
if (unlikely(ret != 0))
goto out;
@@ -401,7 +403,7 @@
static void __exit sq_api_exit(void)
{
- sysdev_driver_unregister(&cpu_sysdev_class, &sq_sysdev_driver);
+ subsys_interface_unregister(&sq_interface);
kfree(sq_bitmap);
kmem_cache_destroy(sq_cache);
}
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index db4ecd7..406508d 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -89,7 +89,8 @@
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched()) {
check_pgt_cache();
@@ -111,7 +112,8 @@
start_critical_timings();
}
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index c5a33f0..9fea49f 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -157,9 +157,6 @@
unsigned long long crash_size, crash_base;
int ret;
- /* this is necessary because of memblock_phys_mem_size() */
- memblock_analyze();
-
ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
&crash_size, &crash_base);
if (ret == 0 && crash_size > 0) {
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 1a0e946..7b57bf1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -230,7 +230,8 @@
pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
PAGE_KERNEL);
- add_active_range(nid, start_pfn, end_pfn);
+ memblock_set_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), nid);
}
void __init __weak plat_early_device_setup(void)
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index c3e61b3..cb8f992 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -143,9 +143,6 @@
CPU_SUBTYPE_SH7785)
default "1"
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
config ARCH_SELECT_MEMORY_MODEL
def_bool y
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 939ca0f..82cc576 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -324,7 +324,6 @@
unsigned long vaddr, end;
int nid;
- memblock_init();
sh_mv.mv_mem_init();
early_reserve_mem();
@@ -337,7 +336,7 @@
sh_mv.mv_mem_reserve();
memblock_enforce_memory_limit(memory_limit);
- memblock_analyze();
+ memblock_allow_resize();
memblock_dump_all();
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index b4c2d2b..e4dd5d5 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -49,7 +49,7 @@
return oprofile_perf_init(ops);
}
-void __exit oprofile_arch_exit(void)
+void oprofile_arch_exit(void)
{
oprofile_perf_exit();
kfree(sh_pmu_op_name);
@@ -60,5 +60,5 @@
ops->backtrace = sh_backtrace;
return -ENODEV;
}
-void __exit oprofile_arch_exit(void) {}
+void oprofile_arch_exit(void) {}
#endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index f92602e..70ae9d8 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -43,6 +43,7 @@
select HAVE_KPROBES
select HAVE_RCU_TABLE_FREE if SMP
select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
select HAVE_SYSCALL_WRAPPERS
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
@@ -352,9 +353,6 @@
def_bool y
depends on NEED_MULTIPLE_NODES
-config ARCH_POPULATES_NODE_MAP
- def_bool y if SPARC64
-
config ARCH_SELECT_MEMORY_MODEL
def_bool y if SPARC64
diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h
deleted file mode 100644
index c67b047..0000000
--- a/arch/sparc/include/asm/memblock.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SPARC64_MEMBLOCK_H
-#define _SPARC64_MEMBLOCK_H
-
-#include <asm/oplib.h>
-
-#define MEMBLOCK_DBG(fmt...) prom_printf(fmt)
-
-#endif /* !(_SPARC64_MEMBLOCK_H) */
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
index 98d6ebb..dbfc1a3 100644
--- a/arch/sparc/include/asm/posix_types.h
+++ b/arch/sparc/include/asm/posix_types.h
@@ -20,7 +20,6 @@
typedef unsigned int __kernel_gid_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned int __kernel_mode_t;
-typedef unsigned short __kernel_umode_t;
typedef unsigned int __kernel_nlink_t;
typedef int __kernel_daddr_t;
typedef long __kernel_off_t;
@@ -55,7 +54,6 @@
typedef unsigned short __kernel_gid_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_umode_t;
typedef short __kernel_nlink_t;
typedef long __kernel_daddr_t;
typedef long __kernel_off_t;
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 9d3fefc..8af1b64 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -58,6 +58,9 @@
#define SO_RXQ_OVFL 0x0024
+#define SO_WIFI_STATUS 0x0025
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define SO_SECURITY_AUTHENTICATION 0x5001
#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x5002
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index fa57532..5cc5888 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -133,7 +133,6 @@
#define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling
* TIF_NEED_RESCHED */
#define TIF_MEMDIE 10 /* is terminating due to OOM killer */
-#define TIF_FREEZE 11 /* is freezing for suspend */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@@ -147,7 +146,6 @@
#define _TIF_DO_NOTIFY_RESUME_MASK (_TIF_NOTIFY_RESUME | \
_TIF_SIGPENDING | \
_TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#endif /* __KERNEL__ */
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 60d86be..01d057f 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -225,7 +225,6 @@
/* flag bit 12 is available */
#define TIF_MEMDIE 13 /* is terminating due to OOM killer */
#define TIF_POLLING_NRFLAG 14
-#define TIF_FREEZE 15 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
@@ -237,7 +236,6 @@
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_USER_WORK_MASK ((0xff << TI_FLAG_WSAVED_SHIFT) | \
_TIF_DO_NOTIFY_RESUME_MASK | \
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
index 91e5a03..383d156 100644
--- a/arch/sparc/include/asm/types.h
+++ b/arch/sparc/include/asm/types.h
@@ -12,12 +12,6 @@
#include <asm-generic/int-ll64.h>
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
#endif /* defined(__sparc__) */
#endif /* defined(_SPARC_TYPES_H) */
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 7429b47..381edcd 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1181,13 +1181,11 @@
dp->rcv_buf_len = 4096;
- dp->ds_states = kzalloc(sizeof(ds_states_template),
- GFP_KERNEL);
+ dp->ds_states = kmemdup(ds_states_template,
+ sizeof(ds_states_template), GFP_KERNEL);
if (!dp->ds_states)
goto out_free_rcv_buf;
- memcpy(dp->ds_states, ds_states_template,
- sizeof(ds_states_template));
dp->num_ds_states = ARRAY_SIZE(ds_states_template);
for (i = 0; i < dp->num_ds_states; i++)
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index b272cda..af5755d 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -849,10 +849,10 @@
if (!irq)
return -ENOMEM;
- if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE))
- return -EINVAL;
if (pci_sun4v_msiq_setvalid(pbm->devhandle, msiqid, HV_MSIQ_VALID))
return -EINVAL;
+ if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE))
+ return -EINVAL;
return irq;
}
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 3739a06..39d8b05 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -95,12 +95,14 @@
set_thread_flag(TIF_POLLING_NRFLAG);
while(1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched() && !cpu_is_offline(cpu))
sparc64_yield(cpu);
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 4661480..741df91 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -58,12 +58,10 @@
void *new_val;
int err;
- new_val = kmalloc(len, GFP_KERNEL);
+ new_val = kmemdup(val, len, GFP_KERNEL);
if (!new_val)
return -ENOMEM;
- memcpy(new_val, val, len);
-
err = -ENODEV;
mutex_lock(&of_set_property_mutex);
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index fe1e3fc..ffb883d 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -84,7 +84,7 @@
prom_printf("PROM SYNC COMMAND...\n");
show_free_areas(0);
- if(current->pid != 0) {
+ if (!is_idle_task(current)) {
local_irq_enable();
sys_sync();
local_irq_disable();
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 7560772..3b1bd7c 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -840,7 +840,7 @@
struct trap_per_cpu *tp = &trap_block[raw_smp_processor_id()];
struct mm_struct *mm = info;
- /* It is not valid to test "currrent->active_mm == mm" here.
+ /* It is not valid to test "current->active_mm == mm" here.
*
* The value of "current" is not changed atomically with
* switch_mm(). But that's OK, we just need to check the
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 441521a..232df99 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -368,11 +368,11 @@
if (current->flags & PF_RANDOMIZE) {
unsigned long val = get_random_int();
if (test_thread_flag(TIF_32BIT))
- rnd = (val % (1UL << (22UL-PAGE_SHIFT)));
+ rnd = (val % (1UL << (23UL-PAGE_SHIFT)));
else
- rnd = (val % (1UL << (29UL-PAGE_SHIFT)));
+ rnd = (val % (1UL << (30UL-PAGE_SHIFT)));
}
- return (rnd << PAGE_SHIFT) * 2;
+ return rnd << PAGE_SHIFT;
}
void arch_pick_mmap_layout(struct mm_struct *mm)
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index 7408201..654e8aa 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -3,7 +3,7 @@
* Copyright (C) 2007 David S. Miller <davem@davemloft.net>
*/
#include <linux/sched.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/percpu.h>
@@ -16,13 +16,13 @@
static DEFINE_PER_CPU(struct hv_mmu_statistics, mmu_stats) __attribute__((aligned(64)));
#define SHOW_MMUSTAT_ULONG(NAME) \
-static ssize_t show_##NAME(struct sys_device *dev, \
- struct sysdev_attribute *attr, char *buf) \
+static ssize_t show_##NAME(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
struct hv_mmu_statistics *p = &per_cpu(mmu_stats, dev->id); \
return sprintf(buf, "%lu\n", p->NAME); \
} \
-static SYSDEV_ATTR(NAME, 0444, show_##NAME, NULL)
+static DEVICE_ATTR(NAME, 0444, show_##NAME, NULL)
SHOW_MMUSTAT_ULONG(immu_tsb_hits_ctx0_8k_tte);
SHOW_MMUSTAT_ULONG(immu_tsb_ticks_ctx0_8k_tte);
@@ -58,38 +58,38 @@
SHOW_MMUSTAT_ULONG(dmmu_tsb_ticks_ctxnon0_256mb_tte);
static struct attribute *mmu_stat_attrs[] = {
- &attr_immu_tsb_hits_ctx0_8k_tte.attr,
- &attr_immu_tsb_ticks_ctx0_8k_tte.attr,
- &attr_immu_tsb_hits_ctx0_64k_tte.attr,
- &attr_immu_tsb_ticks_ctx0_64k_tte.attr,
- &attr_immu_tsb_hits_ctx0_4mb_tte.attr,
- &attr_immu_tsb_ticks_ctx0_4mb_tte.attr,
- &attr_immu_tsb_hits_ctx0_256mb_tte.attr,
- &attr_immu_tsb_ticks_ctx0_256mb_tte.attr,
- &attr_immu_tsb_hits_ctxnon0_8k_tte.attr,
- &attr_immu_tsb_ticks_ctxnon0_8k_tte.attr,
- &attr_immu_tsb_hits_ctxnon0_64k_tte.attr,
- &attr_immu_tsb_ticks_ctxnon0_64k_tte.attr,
- &attr_immu_tsb_hits_ctxnon0_4mb_tte.attr,
- &attr_immu_tsb_ticks_ctxnon0_4mb_tte.attr,
- &attr_immu_tsb_hits_ctxnon0_256mb_tte.attr,
- &attr_immu_tsb_ticks_ctxnon0_256mb_tte.attr,
- &attr_dmmu_tsb_hits_ctx0_8k_tte.attr,
- &attr_dmmu_tsb_ticks_ctx0_8k_tte.attr,
- &attr_dmmu_tsb_hits_ctx0_64k_tte.attr,
- &attr_dmmu_tsb_ticks_ctx0_64k_tte.attr,
- &attr_dmmu_tsb_hits_ctx0_4mb_tte.attr,
- &attr_dmmu_tsb_ticks_ctx0_4mb_tte.attr,
- &attr_dmmu_tsb_hits_ctx0_256mb_tte.attr,
- &attr_dmmu_tsb_ticks_ctx0_256mb_tte.attr,
- &attr_dmmu_tsb_hits_ctxnon0_8k_tte.attr,
- &attr_dmmu_tsb_ticks_ctxnon0_8k_tte.attr,
- &attr_dmmu_tsb_hits_ctxnon0_64k_tte.attr,
- &attr_dmmu_tsb_ticks_ctxnon0_64k_tte.attr,
- &attr_dmmu_tsb_hits_ctxnon0_4mb_tte.attr,
- &attr_dmmu_tsb_ticks_ctxnon0_4mb_tte.attr,
- &attr_dmmu_tsb_hits_ctxnon0_256mb_tte.attr,
- &attr_dmmu_tsb_ticks_ctxnon0_256mb_tte.attr,
+ &dev_attr_immu_tsb_hits_ctx0_8k_tte.attr,
+ &dev_attr_immu_tsb_ticks_ctx0_8k_tte.attr,
+ &dev_attr_immu_tsb_hits_ctx0_64k_tte.attr,
+ &dev_attr_immu_tsb_ticks_ctx0_64k_tte.attr,
+ &dev_attr_immu_tsb_hits_ctx0_4mb_tte.attr,
+ &dev_attr_immu_tsb_ticks_ctx0_4mb_tte.attr,
+ &dev_attr_immu_tsb_hits_ctx0_256mb_tte.attr,
+ &dev_attr_immu_tsb_ticks_ctx0_256mb_tte.attr,
+ &dev_attr_immu_tsb_hits_ctxnon0_8k_tte.attr,
+ &dev_attr_immu_tsb_ticks_ctxnon0_8k_tte.attr,
+ &dev_attr_immu_tsb_hits_ctxnon0_64k_tte.attr,
+ &dev_attr_immu_tsb_ticks_ctxnon0_64k_tte.attr,
+ &dev_attr_immu_tsb_hits_ctxnon0_4mb_tte.attr,
+ &dev_attr_immu_tsb_ticks_ctxnon0_4mb_tte.attr,
+ &dev_attr_immu_tsb_hits_ctxnon0_256mb_tte.attr,
+ &dev_attr_immu_tsb_ticks_ctxnon0_256mb_tte.attr,
+ &dev_attr_dmmu_tsb_hits_ctx0_8k_tte.attr,
+ &dev_attr_dmmu_tsb_ticks_ctx0_8k_tte.attr,
+ &dev_attr_dmmu_tsb_hits_ctx0_64k_tte.attr,
+ &dev_attr_dmmu_tsb_ticks_ctx0_64k_tte.attr,
+ &dev_attr_dmmu_tsb_hits_ctx0_4mb_tte.attr,
+ &dev_attr_dmmu_tsb_ticks_ctx0_4mb_tte.attr,
+ &dev_attr_dmmu_tsb_hits_ctx0_256mb_tte.attr,
+ &dev_attr_dmmu_tsb_ticks_ctx0_256mb_tte.attr,
+ &dev_attr_dmmu_tsb_hits_ctxnon0_8k_tte.attr,
+ &dev_attr_dmmu_tsb_ticks_ctxnon0_8k_tte.attr,
+ &dev_attr_dmmu_tsb_hits_ctxnon0_64k_tte.attr,
+ &dev_attr_dmmu_tsb_ticks_ctxnon0_64k_tte.attr,
+ &dev_attr_dmmu_tsb_hits_ctxnon0_4mb_tte.attr,
+ &dev_attr_dmmu_tsb_ticks_ctxnon0_4mb_tte.attr,
+ &dev_attr_dmmu_tsb_hits_ctxnon0_256mb_tte.attr,
+ &dev_attr_dmmu_tsb_ticks_ctxnon0_256mb_tte.attr,
NULL,
};
@@ -139,15 +139,15 @@
return sun4v_mmustat_conf(ra, &orig_ra);
}
-static ssize_t show_mmustat_enable(struct sys_device *s,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t show_mmustat_enable(struct device *s,
+ struct device_attribute *attr, char *buf)
{
unsigned long val = run_on_cpu(s->id, read_mmustat_enable, 0);
return sprintf(buf, "%lx\n", val);
}
-static ssize_t store_mmustat_enable(struct sys_device *s,
- struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_mmustat_enable(struct device *s,
+ struct device_attribute *attr, const char *buf,
size_t count)
{
unsigned long val, err;
@@ -163,39 +163,39 @@
return count;
}
-static SYSDEV_ATTR(mmustat_enable, 0644, show_mmustat_enable, store_mmustat_enable);
+static DEVICE_ATTR(mmustat_enable, 0644, show_mmustat_enable, store_mmustat_enable);
static int mmu_stats_supported;
-static int register_mmu_stats(struct sys_device *s)
+static int register_mmu_stats(struct device *s)
{
if (!mmu_stats_supported)
return 0;
- sysdev_create_file(s, &attr_mmustat_enable);
+ device_create_file(s, &dev_attr_mmustat_enable);
return sysfs_create_group(&s->kobj, &mmu_stat_group);
}
#ifdef CONFIG_HOTPLUG_CPU
-static void unregister_mmu_stats(struct sys_device *s)
+static void unregister_mmu_stats(struct device *s)
{
if (!mmu_stats_supported)
return;
sysfs_remove_group(&s->kobj, &mmu_stat_group);
- sysdev_remove_file(s, &attr_mmustat_enable);
+ device_remove_file(s, &dev_attr_mmustat_enable);
}
#endif
#define SHOW_CPUDATA_ULONG_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, \
- struct sysdev_attribute *attr, char *buf) \
+static ssize_t show_##NAME(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
cpuinfo_sparc *c = &cpu_data(dev->id); \
return sprintf(buf, "%lu\n", c->MEMBER); \
}
#define SHOW_CPUDATA_UINT_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, \
- struct sysdev_attribute *attr, char *buf) \
+static ssize_t show_##NAME(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
cpuinfo_sparc *c = &cpu_data(dev->id); \
return sprintf(buf, "%u\n", c->MEMBER); \
@@ -209,14 +209,14 @@
SHOW_CPUDATA_UINT_NAME(l2_cache_size, ecache_size);
SHOW_CPUDATA_UINT_NAME(l2_cache_line_size, ecache_line_size);
-static struct sysdev_attribute cpu_core_attrs[] = {
- _SYSDEV_ATTR(clock_tick, 0444, show_clock_tick, NULL),
- _SYSDEV_ATTR(l1_dcache_size, 0444, show_l1_dcache_size, NULL),
- _SYSDEV_ATTR(l1_dcache_line_size, 0444, show_l1_dcache_line_size, NULL),
- _SYSDEV_ATTR(l1_icache_size, 0444, show_l1_icache_size, NULL),
- _SYSDEV_ATTR(l1_icache_line_size, 0444, show_l1_icache_line_size, NULL),
- _SYSDEV_ATTR(l2_cache_size, 0444, show_l2_cache_size, NULL),
- _SYSDEV_ATTR(l2_cache_line_size, 0444, show_l2_cache_line_size, NULL),
+static struct device_attribute cpu_core_attrs[] = {
+ __ATTR(clock_tick, 0444, show_clock_tick, NULL),
+ __ATTR(l1_dcache_size, 0444, show_l1_dcache_size, NULL),
+ __ATTR(l1_dcache_line_size, 0444, show_l1_dcache_line_size, NULL),
+ __ATTR(l1_icache_size, 0444, show_l1_icache_size, NULL),
+ __ATTR(l1_icache_line_size, 0444, show_l1_icache_line_size, NULL),
+ __ATTR(l2_cache_size, 0444, show_l2_cache_size, NULL),
+ __ATTR(l2_cache_line_size, 0444, show_l2_cache_line_size, NULL),
};
static DEFINE_PER_CPU(struct cpu, cpu_devices);
@@ -224,11 +224,11 @@
static void register_cpu_online(unsigned int cpu)
{
struct cpu *c = &per_cpu(cpu_devices, cpu);
- struct sys_device *s = &c->sysdev;
+ struct device *s = &c->dev;
int i;
for (i = 0; i < ARRAY_SIZE(cpu_core_attrs); i++)
- sysdev_create_file(s, &cpu_core_attrs[i]);
+ device_create_file(s, &cpu_core_attrs[i]);
register_mmu_stats(s);
}
@@ -237,12 +237,12 @@
static void unregister_cpu_online(unsigned int cpu)
{
struct cpu *c = &per_cpu(cpu_devices, cpu);
- struct sys_device *s = &c->sysdev;
+ struct device *s = &c->dev;
int i;
unregister_mmu_stats(s);
for (i = 0; i < ARRAY_SIZE(cpu_core_attrs); i++)
- sysdev_remove_file(s, &cpu_core_attrs[i]);
+ device_remove_file(s, &cpu_core_attrs[i]);
}
#endif
diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c
index 5175ac2..8a7f817 100644
--- a/arch/sparc/mm/btfixup.c
+++ b/arch/sparc/mm/btfixup.c
@@ -302,8 +302,7 @@
case 'i': /* INT */
if ((insn & 0xc1c00000) == 0x01000000) /* %HI */
set_addr(addr, q[1], fmangled, (insn & 0xffc00000) | (p[1] >> 10));
- else if ((insn & 0x80002000) == 0x80002000 &&
- (insn & 0x01800000) != 0x01800000) /* %LO */
+ else if ((insn & 0x80002000) == 0x80002000) /* %LO */
set_addr(addr, q[1], fmangled, (insn & 0xffffe000) | (p[1] & 0x3ff));
else {
prom_printf(insn_i, p, addr, insn);
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 8e073d8..b3f5e7d 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -790,7 +790,7 @@
return -1;
}
-u64 memblock_nid_range(u64 start, u64 end, int *nid)
+static u64 memblock_nid_range(u64 start, u64 end, int *nid)
{
*nid = find_node(start);
start += PAGE_SIZE;
@@ -808,7 +808,7 @@
return start;
}
#else
-u64 memblock_nid_range(u64 start, u64 end, int *nid)
+static u64 memblock_nid_range(u64 start, u64 end, int *nid)
{
*nid = 0;
return end;
@@ -816,7 +816,7 @@
#endif
/* This must be invoked after performing all of the necessary
- * add_active_range() calls for 'nid'. We need to be able to get
+ * memblock_set_node() calls for 'nid'. We need to be able to get
* correct data from get_pfn_range_for_nid().
*/
static void __init allocate_node_data(int nid)
@@ -987,14 +987,11 @@
this_end = memblock_nid_range(start, end, &nid);
- numadbg("Adding active range nid[%d] "
+ numadbg("Setting memblock NUMA node nid[%d] "
"start[%lx] end[%lx]\n",
nid, start, this_end);
- add_active_range(nid,
- start >> PAGE_SHIFT,
- this_end >> PAGE_SHIFT);
-
+ memblock_set_node(start, this_end - start, nid);
start = this_end;
}
}
@@ -1282,7 +1279,6 @@
{
unsigned long top_of_ram = memblock_end_of_DRAM();
unsigned long total_ram = memblock_phys_mem_size();
- struct memblock_region *reg;
numadbg("bootmem_init_nonnuma()\n");
@@ -1292,20 +1288,8 @@
(top_of_ram - total_ram) >> 20);
init_node_masks_nonnuma();
-
- for_each_memblock(memory, reg) {
- unsigned long start_pfn, end_pfn;
-
- if (!reg->size)
- continue;
-
- start_pfn = memblock_region_memory_base_pfn(reg);
- end_pfn = memblock_region_memory_end_pfn(reg);
- add_active_range(0, start_pfn, end_pfn);
- }
-
+ memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
allocate_node_data(0);
-
node_set_online(0);
}
@@ -1769,8 +1753,6 @@
sun4v_ktsb_init();
}
- memblock_init();
-
/* Find available physical memory...
*
* Read it twice in order to work around a bug in openfirmware.
@@ -1796,7 +1778,7 @@
memblock_enforce_memory_limit(cmdline_memory_size);
- memblock_analyze();
+ memblock_allow_resize();
memblock_dump_all();
set_bit(0, mmu_context_bmap);
diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h
index 94e9a51..f80f8ce 100644
--- a/arch/tile/include/asm/irq.h
+++ b/arch/tile/include/asm/irq.h
@@ -74,16 +74,6 @@
*/
void tile_irq_activate(unsigned int irq, int tile_irq_type);
-/*
- * For onboard, non-PCI (e.g. TILE_IRQ_PERCPU) devices, drivers know
- * how to use enable/disable_percpu_irq() to manage interrupts on each
- * core. We can't use the generic enable/disable_irq() because they
- * use a single reference count per irq, rather than per cpu per irq.
- */
-void enable_percpu_irq(unsigned int irq);
-void disable_percpu_irq(unsigned int irq);
-
-
void setup_irq_regs(void);
#endif /* _ASM_TILE_IRQ_H */
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
index aa0134d..02e6280 100644
--- a/arch/tile/kernel/irq.c
+++ b/arch/tile/kernel/irq.c
@@ -152,14 +152,13 @@
* Remove an irq from the disabled mask. If we're in an interrupt
* context, defer enabling the HW interrupt until we leave.
*/
-void enable_percpu_irq(unsigned int irq)
+static void tile_irq_chip_enable(struct irq_data *d)
{
- get_cpu_var(irq_disable_mask) &= ~(1UL << irq);
+ get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq);
if (__get_cpu_var(irq_depth) == 0)
- unmask_irqs(1UL << irq);
+ unmask_irqs(1UL << d->irq);
put_cpu_var(irq_disable_mask);
}
-EXPORT_SYMBOL(enable_percpu_irq);
/*
* Add an irq to the disabled mask. We disable the HW interrupt
@@ -167,13 +166,12 @@
* in an interrupt context, the return path is careful to avoid
* unmasking a newly disabled interrupt.
*/
-void disable_percpu_irq(unsigned int irq)
+static void tile_irq_chip_disable(struct irq_data *d)
{
- get_cpu_var(irq_disable_mask) |= (1UL << irq);
- mask_irqs(1UL << irq);
+ get_cpu_var(irq_disable_mask) |= (1UL << d->irq);
+ mask_irqs(1UL << d->irq);
put_cpu_var(irq_disable_mask);
}
-EXPORT_SYMBOL(disable_percpu_irq);
/* Mask an interrupt. */
static void tile_irq_chip_mask(struct irq_data *d)
@@ -209,6 +207,8 @@
static struct irq_chip tile_irq_chip = {
.name = "tile_irq_chip",
+ .irq_enable = tile_irq_chip_enable,
+ .irq_disable = tile_irq_chip_disable,
.irq_ack = tile_irq_chip_ack,
.irq_eoi = tile_irq_chip_eoi,
.irq_mask = tile_irq_chip_mask,
diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c
index 658f2ce..b3ed19f 100644
--- a/arch/tile/kernel/pci-dma.c
+++ b/arch/tile/kernel/pci-dma.c
@@ -15,6 +15,7 @@
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <asm/tlbflush.h>
#include <asm/homecache.h>
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index 2a8014c..9d610d3 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -24,6 +24,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <asm/sections.h>
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 9c45d8b..4c1ac6e 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -85,7 +85,8 @@
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched()) {
if (cpu_is_offline(cpu))
BUG(); /* no HOTPLUG_CPU */
@@ -105,7 +106,8 @@
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
}
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c
index b671a86..f862b00 100644
--- a/arch/tile/kernel/sysfs.c
+++ b/arch/tile/kernel/sysfs.c
@@ -14,10 +14,11 @@
* /sys entry support.
*/
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/cpu.h>
#include <linux/slab.h>
#include <linux/smp.h>
+#include <linux/stat.h>
#include <hv/hypervisor.h>
/* Return a string queried from the hypervisor, truncated to page size. */
@@ -31,55 +32,55 @@
return n;
}
-static ssize_t chip_width_show(struct sysdev_class *dev,
- struct sysdev_class_attribute *attr,
+static ssize_t chip_width_show(struct device *dev,
+ struct device_attribute *attr,
char *page)
{
return sprintf(page, "%u\n", smp_width);
}
-static SYSDEV_CLASS_ATTR(chip_width, 0444, chip_width_show, NULL);
+static DEVICE_ATTR(chip_width, 0444, chip_width_show, NULL);
-static ssize_t chip_height_show(struct sysdev_class *dev,
- struct sysdev_class_attribute *attr,
+static ssize_t chip_height_show(struct device *dev,
+ struct device_attribute *attr,
char *page)
{
return sprintf(page, "%u\n", smp_height);
}
-static SYSDEV_CLASS_ATTR(chip_height, 0444, chip_height_show, NULL);
+static DEVICE_ATTR(chip_height, 0444, chip_height_show, NULL);
-static ssize_t chip_serial_show(struct sysdev_class *dev,
- struct sysdev_class_attribute *attr,
+static ssize_t chip_serial_show(struct device *dev,
+ struct device_attribute *attr,
char *page)
{
return get_hv_confstr(page, HV_CONFSTR_CHIP_SERIAL_NUM);
}
-static SYSDEV_CLASS_ATTR(chip_serial, 0444, chip_serial_show, NULL);
+static DEVICE_ATTR(chip_serial, 0444, chip_serial_show, NULL);
-static ssize_t chip_revision_show(struct sysdev_class *dev,
- struct sysdev_class_attribute *attr,
+static ssize_t chip_revision_show(struct device *dev,
+ struct device_attribute *attr,
char *page)
{
return get_hv_confstr(page, HV_CONFSTR_CHIP_REV);
}
-static SYSDEV_CLASS_ATTR(chip_revision, 0444, chip_revision_show, NULL);
+static DEVICE_ATTR(chip_revision, 0444, chip_revision_show, NULL);
-static ssize_t type_show(struct sysdev_class *dev,
- struct sysdev_class_attribute *attr,
+static ssize_t type_show(struct device *dev,
+ struct device_attribute *attr,
char *page)
{
return sprintf(page, "tilera\n");
}
-static SYSDEV_CLASS_ATTR(type, 0444, type_show, NULL);
+static DEVICE_ATTR(type, 0444, type_show, NULL);
#define HV_CONF_ATTR(name, conf) \
- static ssize_t name ## _show(struct sysdev_class *dev, \
- struct sysdev_class_attribute *attr, \
+ static ssize_t name ## _show(struct device *dev, \
+ struct device_attribute *attr, \
char *page) \
{ \
return get_hv_confstr(page, conf); \
} \
- static SYSDEV_CLASS_ATTR(name, 0444, name ## _show, NULL);
+ static DEVICE_ATTR(name, 0444, name ## _show, NULL);
HV_CONF_ATTR(version, HV_CONFSTR_HV_SW_VER)
HV_CONF_ATTR(config_version, HV_CONFSTR_HV_CONFIG_VER)
@@ -95,15 +96,15 @@
HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL)
static struct attribute *board_attrs[] = {
- &attr_board_part.attr,
- &attr_board_serial.attr,
- &attr_board_revision.attr,
- &attr_board_description.attr,
- &attr_mezz_part.attr,
- &attr_mezz_serial.attr,
- &attr_mezz_revision.attr,
- &attr_mezz_description.attr,
- &attr_switch_control.attr,
+ &dev_attr_board_part.attr,
+ &dev_attr_board_serial.attr,
+ &dev_attr_board_revision.attr,
+ &dev_attr_board_description.attr,
+ &dev_attr_mezz_part.attr,
+ &dev_attr_mezz_serial.attr,
+ &dev_attr_mezz_revision.attr,
+ &dev_attr_mezz_description.attr,
+ &dev_attr_switch_control.attr,
NULL
};
@@ -150,12 +151,11 @@
static int __init create_sysfs_entries(void)
{
- struct sysdev_class *cls = &cpu_sysdev_class;
int err = 0;
#define create_cpu_attr(name) \
if (!err) \
- err = sysfs_create_file(&cls->kset.kobj, &attr_##name.attr);
+ err = device_create_file(cpu_subsys.dev_root, &dev_attr_##name);
create_cpu_attr(chip_width);
create_cpu_attr(chip_height);
create_cpu_attr(chip_serial);
@@ -163,7 +163,7 @@
#define create_hv_attr(name) \
if (!err) \
- err = sysfs_create_file(hypervisor_kobj, &attr_##name.attr);
+ err = sysfs_create_file(hypervisor_kobj, &dev_attr_##name);
create_hv_attr(type);
create_hv_attr(version);
create_hv_attr(config_version);
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
index a87d2a8..2a81d32 100644
--- a/arch/tile/lib/exports.c
+++ b/arch/tile/lib/exports.c
@@ -39,6 +39,9 @@
EXPORT_SYMBOL(current_text_addr);
EXPORT_SYMBOL(dump_stack);
+/* arch/tile/kernel/head.S */
+EXPORT_SYMBOL(empty_zero_page);
+
/* arch/tile/lib/, various memcpy files */
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(__copy_to_user_inatomic);
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index 25b7b90..c1eaaa1 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -54,7 +54,7 @@
if (unlikely(tsk->pid < 2)) {
panic("Signal %d (code %d) at %#lx sent to %s!",
si_signo, si_code & 0xffff, address,
- tsk->pid ? "init" : "the idle task");
+ is_idle_task(tsk) ? "the idle task" : "init");
}
info.si_signo = si_signo;
@@ -515,7 +515,7 @@
if (unlikely(tsk->pid < 2)) {
panic("Kernel page fault running %s!",
- tsk->pid ? "init" : "the idle task");
+ is_idle_task(tsk) ? "the idle task" : "init");
}
/*
diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c
index cbe6f4f..1cc6ae4 100644
--- a/arch/tile/mm/homecache.c
+++ b/arch/tile/mm/homecache.c
@@ -449,9 +449,12 @@
VM_BUG_ON(!virt_addr_valid((void *)addr));
page = virt_to_page((void *)addr);
if (put_page_testzero(page)) {
- int pages = (1 << order);
homecache_change_page_home(page, order, initial_page_home());
- while (pages--)
- __free_page(page++);
+ if (order == 0) {
+ free_hot_cold_page(page, 0);
+ } else {
+ init_page_count(page);
+ __free_pages(page, order);
+ }
}
}
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 5bd1bad..200c4ab 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -71,7 +71,6 @@
#define TIF_MEMDIE 5 /* is terminating due to OOM killer */
#define TIF_SYSCALL_AUDIT 6
#define TIF_RESTORE_SIGMASK 7
-#define TIF_FREEZE 16 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
@@ -80,6 +79,5 @@
#define _TIF_MEMDIE (1 << TIF_MEMDIE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
#endif
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index c533835..69f2490 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -246,10 +246,12 @@
if (need_resched())
schedule();
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
nsecs = disable_timer();
idle_sleep(nsecs);
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
}
}
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index a08d9fa..82a6e22 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -75,8 +75,6 @@
.rating = 300,
.read = itimer_read,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1000,
- .shift = 0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -94,9 +92,9 @@
clockevent_delta2ns(60 * HZ, &itimer_clockevent);
itimer_clockevent.min_delta_ns =
clockevent_delta2ns(1, &itimer_clockevent);
- err = clocksource_register(&itimer_clocksource);
+ err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
if (err) {
- printk(KERN_ERR "clocksource_register returned %d\n", err);
+ printk(KERN_ERR "clocksource_register_hz returned %d\n", err);
return;
}
clockevents_register_device(&itimer_clockevent);
diff --git a/arch/unicore32/include/asm/thread_info.h b/arch/unicore32/include/asm/thread_info.h
index c270e9e..89f7557 100644
--- a/arch/unicore32/include/asm/thread_info.h
+++ b/arch/unicore32/include/asm/thread_info.h
@@ -135,14 +135,12 @@
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_MEMDIE 18
-#define TIF_FREEZE 19
#define TIF_RESTORE_SIGMASK 20
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
/*
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index ba401df..52edc2b 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -55,7 +55,8 @@
{
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched()) {
local_irq_disable();
stop_critical_timings();
@@ -63,7 +64,8 @@
local_irq_enable();
start_critical_timings();
}
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
index 1a505a7..254adee 100644
--- a/arch/unicore32/kernel/puv3-core.c
+++ b/arch/unicore32/kernel/puv3-core.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/io.h>
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
index e731c56..37b12a0 100644
--- a/arch/unicore32/kernel/puv3-nb0916.c
+++ b/arch/unicore32/kernel/puv3-nb0916.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
index 471b6bc..673d7a8 100644
--- a/arch/unicore32/kernel/setup.c
+++ b/arch/unicore32/kernel/setup.c
@@ -37,6 +37,7 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/traps.h>
+#include <asm/memblock.h>
#include "setup.h"
diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c
index 3b379cd..de186bd 100644
--- a/arch/unicore32/mm/init.c
+++ b/arch/unicore32/mm/init.c
@@ -26,6 +26,7 @@
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
+#include <asm/memblock.h>
#include <mach/map.h>
#include "mm.h"
@@ -245,7 +246,6 @@
sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]),
meminfo_cmp, NULL);
- memblock_init();
for (i = 0; i < mi->nr_banks; i++)
memblock_add(mi->bank[i].start, mi->bank[i].size);
@@ -264,7 +264,7 @@
uc32_mm_memblock_reserve();
- memblock_analyze();
+ memblock_allow_resize();
memblock_dump_all();
}
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
index 3e5c3e5..43c20b4 100644
--- a/arch/unicore32/mm/mmu.c
+++ b/arch/unicore32/mm/mmu.c
@@ -25,6 +25,7 @@
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
+#include <asm/memblock.h>
#include <mach/map.h>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cb9a104..1d2a69d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,6 +26,8 @@
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_FRAME_POINTERS
select HAVE_DMA_ATTRS
@@ -204,9 +206,6 @@
bool
default X86_64
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
config AUDIT_ARCH
bool
default X86_64
@@ -343,6 +342,7 @@
If you enable this option then you'll be able to select support
for the following (non-PC) 64 bit x86 platforms:
+ Numascale NumaChip
ScaleMP vSMP
SGI Ultraviolet
@@ -351,6 +351,18 @@
endif
# This is an alphabetically sorted list of 64 bit extended platforms
# Please maintain the alphabetic order if and when there are additions
+config X86_NUMACHIP
+ bool "Numascale NumaChip"
+ depends on X86_64
+ depends on X86_EXTENDED_PLATFORM
+ depends on NUMA
+ depends on SMP
+ depends on X86_X2APIC
+ depends on !EDAC_AMD64
+ ---help---
+ Adds support for Numascale NumaChip large-SMP systems. Needed to
+ enable more than ~168 cores.
+ If you don't have one of these, you should say N here.
config X86_VSMP
bool "ScaleMP vSMP"
@@ -390,7 +402,7 @@
This option compiles in support for the CE4100 SOC for settop
boxes and media devices.
-config X86_INTEL_MID
+config X86_WANT_INTEL_MID
bool "Intel MID platform support"
depends on X86_32
depends on X86_EXTENDED_PLATFORM
@@ -399,7 +411,10 @@
systems which do not have the PCI legacy interfaces (Moorestown,
Medfield). If you are building for a PC class system say N here.
-if X86_INTEL_MID
+if X86_WANT_INTEL_MID
+
+config X86_INTEL_MID
+ bool
config X86_MRST
bool "Moorestown MID platform"
@@ -411,6 +426,7 @@
select SPI
select INTEL_SCU_IPC
select X86_PLATFORM_DEVICES
+ select X86_INTEL_MID
---help---
Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform. Moorestown consists of two chips:
@@ -1726,7 +1742,7 @@
config X86_APM_BOOT
def_bool y
- depends on APM || APM_MODULE
+ depends on APM
menuconfig APM
tristate "APM (Advanced Power Management) BIOS support"
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index a6253ec..3e27456 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -134,7 +134,7 @@
CFI_REL_OFFSET rsp,0
pushfq_cfi
/*CFI_REL_OFFSET rflags,0*/
- movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d
+ movl TI_sysenter_return+THREAD_INFO(%rsp,3*8-KERNEL_STACK_OFFSET),%r10d
CFI_REGISTER rip,r10
pushq_cfi $__USER32_CS
/*CFI_REL_OFFSET cs,0*/
@@ -150,9 +150,8 @@
.section __ex_table,"a"
.quad 1b,ia32_badarg
.previous
- GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,TI_status(%r10)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
CFI_REMEMBER_STATE
jnz sysenter_tracesys
cmpq $(IA32_NR_syscalls-1),%rax
@@ -162,13 +161,12 @@
sysenter_dispatch:
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX-ARGOFFSET(%rsp)
- GET_THREAD_INFO(%r10)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
+ testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz sysexit_audit
sysexit_from_sys_call:
- andl $~TS_COMPAT,TI_status(%r10)
+ andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
/* clear IF, that popfq doesn't enable interrupts early */
andl $~0x200,EFLAGS-R11(%rsp)
movl RIP-R11(%rsp),%edx /* User %eip */
@@ -205,7 +203,7 @@
.endm
.macro auditsys_exit exit
- testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+ testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz ia32_ret_from_sys_call
TRACE_IRQS_ON
sti
@@ -215,12 +213,11 @@
movzbl %al,%edi /* zero-extend that into %edi */
inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
call audit_syscall_exit
- GET_THREAD_INFO(%r10)
movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
cli
TRACE_IRQS_OFF
- testl %edi,TI_flags(%r10)
+ testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jz \exit
CLEAR_RREGS -ARGOFFSET
jmp int_with_check
@@ -238,7 +235,7 @@
sysenter_tracesys:
#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jz sysenter_auditsys
#endif
SAVE_REST
@@ -309,9 +306,8 @@
.section __ex_table,"a"
.quad 1b,ia32_badarg
.previous
- GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,TI_status(%r10)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
CFI_REMEMBER_STATE
jnz cstar_tracesys
cmpq $IA32_NR_syscalls-1,%rax
@@ -321,13 +317,12 @@
cstar_dispatch:
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX-ARGOFFSET(%rsp)
- GET_THREAD_INFO(%r10)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
+ testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz sysretl_audit
sysretl_from_sys_call:
- andl $~TS_COMPAT,TI_status(%r10)
+ andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
RESTORE_ARGS 0,-ARG_SKIP,0,0,0
movl RIP-ARGOFFSET(%rsp),%ecx
CFI_REGISTER rip,rcx
@@ -355,7 +350,7 @@
cstar_tracesys:
#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jz cstar_auditsys
#endif
xchgl %r9d,%ebp
@@ -420,9 +415,8 @@
/* note the registers are not zero extended to the sf.
this could be a problem. */
SAVE_ARGS 0,1,0
- GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,TI_status(%r10)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz ia32_tracesys
cmpq $(IA32_NR_syscalls-1),%rax
ja ia32_badsys
@@ -459,8 +453,8 @@
CFI_ENDPROC
.macro PTREGSCALL label, func, arg
- .globl \label
-\label:
+ ALIGN
+GLOBAL(\label)
leaq \func(%rip),%rax
leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
jmp ia32_ptregs_common
@@ -477,7 +471,8 @@
PTREGSCALL stub32_vfork, sys_vfork, %rdi
PTREGSCALL stub32_iopl, sys_iopl, %rsi
-ENTRY(ia32_ptregs_common)
+ ALIGN
+ia32_ptregs_common:
popq %r11
CFI_ENDPROC
CFI_STARTPROC32 simple
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index 091508b..952bd01 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -4,10 +4,10 @@
#ifdef CONFIG_SMP
.macro LOCK_PREFIX
-1: lock
+672: lock
.section .smp_locks,"a"
.balign 4
- .long 1b - .
+ .long 672b - .
.previous
.endm
#else
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 1a6c09a..3ab9bdd 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -176,6 +176,7 @@
}
extern int x2apic_phys;
+extern int x2apic_preenabled;
extern void check_x2apic(void);
extern void enable_x2apic(void);
extern void x2apic_icr_write(u32 low, u32 id);
@@ -198,6 +199,9 @@
x2apic_phys = 1;
}
#else
+static inline void disable_x2apic(void)
+{
+}
static inline void check_x2apic(void)
{
}
@@ -212,6 +216,7 @@
{
}
+#define nox2apic 0
#define x2apic_preenabled 0
#define x2apic_supported() 0
#endif
@@ -410,6 +415,7 @@
#endif
#ifdef CONFIG_X86_LOCAL_APIC
+
static inline u32 apic_read(u32 reg)
{
return apic->read(reg);
diff --git a/arch/x86/include/asm/apic_flat_64.h b/arch/x86/include/asm/apic_flat_64.h
new file mode 100644
index 0000000..a2d3127
--- /dev/null
+++ b/arch/x86/include/asm/apic_flat_64.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_X86_APIC_FLAT_64_H
+#define _ASM_X86_APIC_FLAT_64_H
+
+extern void flat_init_apic_ldr(void);
+
+#endif
+
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 3925d80..134bba0 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -144,6 +144,7 @@
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
#define APIC_BASE_MSR 0x800
+#define XAPIC_ENABLE (1UL << 11)
#define X2APIC_ENABLE (1UL << 10)
#ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 1775d6e..b97596e 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -380,6 +380,8 @@
return word;
}
+#undef ADDR
+
#ifdef __KERNEL__
/**
* ffs - find first set bit in word
@@ -395,10 +397,25 @@
static inline int ffs(int x)
{
int r;
-#ifdef CONFIG_X86_CMOV
+
+#ifdef CONFIG_X86_64
+ /*
+ * AMD64 says BSFL won't clobber the dest reg if x==0; Intel64 says the
+ * dest reg is undefined if x==0, but their CPU architect says its
+ * value is written to set it to the same as before, except that the
+ * top 32 bits will be cleared.
+ *
+ * We cannot do this on 32 bits because at the very least some
+ * 486 CPUs did not behave this way.
+ */
+ long tmp = -1;
+ asm("bsfl %1,%0"
+ : "=r" (r)
+ : "rm" (x), "0" (tmp));
+#elif defined(CONFIG_X86_CMOV)
asm("bsfl %1,%0\n\t"
"cmovzl %2,%0"
- : "=r" (r) : "rm" (x), "r" (-1));
+ : "=&r" (r) : "rm" (x), "r" (-1));
#else
asm("bsfl %1,%0\n\t"
"jnz 1f\n\t"
@@ -422,7 +439,22 @@
static inline int fls(int x)
{
int r;
-#ifdef CONFIG_X86_CMOV
+
+#ifdef CONFIG_X86_64
+ /*
+ * AMD64 says BSRL won't clobber the dest reg if x==0; Intel64 says the
+ * dest reg is undefined if x==0, but their CPU architect says its
+ * value is written to set it to the same as before, except that the
+ * top 32 bits will be cleared.
+ *
+ * We cannot do this on 32 bits because at the very least some
+ * 486 CPUs did not behave this way.
+ */
+ long tmp = -1;
+ asm("bsrl %1,%0"
+ : "=r" (r)
+ : "rm" (x), "0" (tmp));
+#elif defined(CONFIG_X86_CMOV)
asm("bsrl %1,%0\n\t"
"cmovzl %2,%0"
: "=&r" (r) : "rm" (x), "rm" (-1));
@@ -434,11 +466,35 @@
#endif
return r + 1;
}
-#endif /* __KERNEL__ */
-#undef ADDR
-
-#ifdef __KERNEL__
+/**
+ * fls64 - find last set bit in a 64-bit word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffsll, but returns the position of the most significant set bit.
+ *
+ * fls64(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 64.
+ */
+#ifdef CONFIG_X86_64
+static __always_inline int fls64(__u64 x)
+{
+ long bitpos = -1;
+ /*
+ * AMD64 says BSRQ won't clobber the dest reg if x==0; Intel64 says the
+ * dest reg is undefined if x==0, but their CPU architect says its
+ * value is written to set it to the same as before.
+ */
+ asm("bsrq %1,%0"
+ : "+r" (bitpos)
+ : "rm" (x));
+ return bitpos + 1;
+}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif
#include <asm-generic/bitops/find.h>
@@ -450,12 +506,6 @@
#include <asm-generic/bitops/const_hweight.h>
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls64.h>
-
-#ifdef __KERNEL__
-
#include <asm-generic/bitops/le.h>
#include <asm-generic/bitops/ext2-atomic-setbit.h>
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index 5d3acdf..0c9fa27 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -14,6 +14,8 @@
__compiletime_error("Bad argument size for cmpxchg");
extern void __xadd_wrong_size(void)
__compiletime_error("Bad argument size for xadd");
+extern void __add_wrong_size(void)
+ __compiletime_error("Bad argument size for add");
/*
* Constants for operation sizes. On 32-bit, the 64-bit size it set to
@@ -31,60 +33,47 @@
#define __X86_CASE_Q -1 /* sizeof will never return -1 */
#endif
+/*
+ * An exchange-type operation, which takes a value and a pointer, and
+ * returns a the old value.
+ */
+#define __xchg_op(ptr, arg, op, lock) \
+ ({ \
+ __typeof__ (*(ptr)) __ret = (arg); \
+ switch (sizeof(*(ptr))) { \
+ case __X86_CASE_B: \
+ asm volatile (lock #op "b %b0, %1\n" \
+ : "+r" (__ret), "+m" (*(ptr)) \
+ : : "memory", "cc"); \
+ break; \
+ case __X86_CASE_W: \
+ asm volatile (lock #op "w %w0, %1\n" \
+ : "+r" (__ret), "+m" (*(ptr)) \
+ : : "memory", "cc"); \
+ break; \
+ case __X86_CASE_L: \
+ asm volatile (lock #op "l %0, %1\n" \
+ : "+r" (__ret), "+m" (*(ptr)) \
+ : : "memory", "cc"); \
+ break; \
+ case __X86_CASE_Q: \
+ asm volatile (lock #op "q %q0, %1\n" \
+ : "+r" (__ret), "+m" (*(ptr)) \
+ : : "memory", "cc"); \
+ break; \
+ default: \
+ __ ## op ## _wrong_size(); \
+ } \
+ __ret; \
+ })
+
/*
* Note: no "lock" prefix even on SMP: xchg always implies lock anyway.
* Since this is generally used to protect other memory information, we
* use "asm volatile" and "memory" clobbers to prevent gcc from moving
* information around.
*/
-#define __xchg(x, ptr, size) \
-({ \
- __typeof(*(ptr)) __x = (x); \
- switch (size) { \
- case __X86_CASE_B: \
- { \
- volatile u8 *__ptr = (volatile u8 *)(ptr); \
- asm volatile("xchgb %0,%1" \
- : "=q" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- case __X86_CASE_W: \
- { \
- volatile u16 *__ptr = (volatile u16 *)(ptr); \
- asm volatile("xchgw %0,%1" \
- : "=r" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- case __X86_CASE_L: \
- { \
- volatile u32 *__ptr = (volatile u32 *)(ptr); \
- asm volatile("xchgl %0,%1" \
- : "=r" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- case __X86_CASE_Q: \
- { \
- volatile u64 *__ptr = (volatile u64 *)(ptr); \
- asm volatile("xchgq %0,%1" \
- : "=r" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- default: \
- __xchg_wrong_size(); \
- } \
- __x; \
-})
-
-#define xchg(ptr, v) \
- __xchg((v), (ptr), sizeof(*ptr))
+#define xchg(ptr, v) __xchg_op((ptr), (v), xchg, "")
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
@@ -165,36 +154,6 @@
__cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
#endif
-#define __xadd(ptr, inc, lock) \
- ({ \
- __typeof__ (*(ptr)) __ret = (inc); \
- switch (sizeof(*(ptr))) { \
- case __X86_CASE_B: \
- asm volatile (lock "xaddb %b0, %1\n" \
- : "+r" (__ret), "+m" (*(ptr)) \
- : : "memory", "cc"); \
- break; \
- case __X86_CASE_W: \
- asm volatile (lock "xaddw %w0, %1\n" \
- : "+r" (__ret), "+m" (*(ptr)) \
- : : "memory", "cc"); \
- break; \
- case __X86_CASE_L: \
- asm volatile (lock "xaddl %0, %1\n" \
- : "+r" (__ret), "+m" (*(ptr)) \
- : : "memory", "cc"); \
- break; \
- case __X86_CASE_Q: \
- asm volatile (lock "xaddq %q0, %1\n" \
- : "+r" (__ret), "+m" (*(ptr)) \
- : : "memory", "cc"); \
- break; \
- default: \
- __xadd_wrong_size(); \
- } \
- __ret; \
- })
-
/*
* xadd() adds "inc" to "*ptr" and atomically returns the previous
* value of "*ptr".
@@ -203,8 +162,72 @@
* xadd_sync() is always locked
* xadd_local() is never locked
*/
+#define __xadd(ptr, inc, lock) __xchg_op((ptr), (inc), xadd, lock)
#define xadd(ptr, inc) __xadd((ptr), (inc), LOCK_PREFIX)
#define xadd_sync(ptr, inc) __xadd((ptr), (inc), "lock; ")
#define xadd_local(ptr, inc) __xadd((ptr), (inc), "")
+#define __add(ptr, inc, lock) \
+ ({ \
+ __typeof__ (*(ptr)) __ret = (inc); \
+ switch (sizeof(*(ptr))) { \
+ case __X86_CASE_B: \
+ asm volatile (lock "addb %b1, %0\n" \
+ : "+m" (*(ptr)) : "ri" (inc) \
+ : "memory", "cc"); \
+ break; \
+ case __X86_CASE_W: \
+ asm volatile (lock "addw %w1, %0\n" \
+ : "+m" (*(ptr)) : "ri" (inc) \
+ : "memory", "cc"); \
+ break; \
+ case __X86_CASE_L: \
+ asm volatile (lock "addl %1, %0\n" \
+ : "+m" (*(ptr)) : "ri" (inc) \
+ : "memory", "cc"); \
+ break; \
+ case __X86_CASE_Q: \
+ asm volatile (lock "addq %1, %0\n" \
+ : "+m" (*(ptr)) : "ri" (inc) \
+ : "memory", "cc"); \
+ break; \
+ default: \
+ __add_wrong_size(); \
+ } \
+ __ret; \
+ })
+
+/*
+ * add_*() adds "inc" to "*ptr"
+ *
+ * __add() takes a lock prefix
+ * add_smp() is locked when multiple CPUs are online
+ * add_sync() is always locked
+ */
+#define add_smp(ptr, inc) __add((ptr), (inc), LOCK_PREFIX)
+#define add_sync(ptr, inc) __add((ptr), (inc), "lock; ")
+
+#define __cmpxchg_double(pfx, p1, p2, o1, o2, n1, n2) \
+({ \
+ bool __ret; \
+ __typeof__(*(p1)) __old1 = (o1), __new1 = (n1); \
+ __typeof__(*(p2)) __old2 = (o2), __new2 = (n2); \
+ BUILD_BUG_ON(sizeof(*(p1)) != sizeof(long)); \
+ BUILD_BUG_ON(sizeof(*(p2)) != sizeof(long)); \
+ VM_BUG_ON((unsigned long)(p1) % (2 * sizeof(long))); \
+ VM_BUG_ON((unsigned long)((p1) + 1) != (unsigned long)(p2)); \
+ asm volatile(pfx "cmpxchg%c4b %2; sete %0" \
+ : "=a" (__ret), "+d" (__old2), \
+ "+m" (*(p1)), "+m" (*(p2)) \
+ : "i" (2 * sizeof(long)), "a" (__old1), \
+ "b" (__new1), "c" (__new2)); \
+ __ret; \
+})
+
+#define cmpxchg_double(p1, p2, o1, o2, n1, n2) \
+ __cmpxchg_double(LOCK_PREFIX, p1, p2, o1, o2, n1, n2)
+
+#define cmpxchg_double_local(p1, p2, o1, o2, n1, n2) \
+ __cmpxchg_double(, p1, p2, o1, o2, n1, n2)
+
#endif /* ASM_X86_CMPXCHG_H */
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index fbebb07..53f4b21 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -166,52 +166,6 @@
#endif
-#define cmpxchg8b(ptr, o1, o2, n1, n2) \
-({ \
- char __ret; \
- __typeof__(o2) __dummy; \
- __typeof__(*(ptr)) __old1 = (o1); \
- __typeof__(o2) __old2 = (o2); \
- __typeof__(*(ptr)) __new1 = (n1); \
- __typeof__(o2) __new2 = (n2); \
- asm volatile(LOCK_PREFIX "cmpxchg8b %2; setz %1" \
- : "=d"(__dummy), "=a" (__ret), "+m" (*ptr)\
- : "a" (__old1), "d"(__old2), \
- "b" (__new1), "c" (__new2) \
- : "memory"); \
- __ret; })
-
-
-#define cmpxchg8b_local(ptr, o1, o2, n1, n2) \
-({ \
- char __ret; \
- __typeof__(o2) __dummy; \
- __typeof__(*(ptr)) __old1 = (o1); \
- __typeof__(o2) __old2 = (o2); \
- __typeof__(*(ptr)) __new1 = (n1); \
- __typeof__(o2) __new2 = (n2); \
- asm volatile("cmpxchg8b %2; setz %1" \
- : "=d"(__dummy), "=a"(__ret), "+m" (*ptr)\
- : "a" (__old), "d"(__old2), \
- "b" (__new1), "c" (__new2), \
- : "memory"); \
- __ret; })
-
-
-#define cmpxchg_double(ptr, o1, o2, n1, n2) \
-({ \
- BUILD_BUG_ON(sizeof(*(ptr)) != 4); \
- VM_BUG_ON((unsigned long)(ptr) % 8); \
- cmpxchg8b((ptr), (o1), (o2), (n1), (n2)); \
-})
-
-#define cmpxchg_double_local(ptr, o1, o2, n1, n2) \
-({ \
- BUILD_BUG_ON(sizeof(*(ptr)) != 4); \
- VM_BUG_ON((unsigned long)(ptr) % 8); \
- cmpxchg16b_local((ptr), (o1), (o2), (n1), (n2)); \
-})
-
#define system_has_cmpxchg_double() cpu_has_cx8
#endif /* _ASM_X86_CMPXCHG_32_H */
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
index 285da02..614be87 100644
--- a/arch/x86/include/asm/cmpxchg_64.h
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -20,49 +20,6 @@
cmpxchg_local((ptr), (o), (n)); \
})
-#define cmpxchg16b(ptr, o1, o2, n1, n2) \
-({ \
- char __ret; \
- __typeof__(o2) __junk; \
- __typeof__(*(ptr)) __old1 = (o1); \
- __typeof__(o2) __old2 = (o2); \
- __typeof__(*(ptr)) __new1 = (n1); \
- __typeof__(o2) __new2 = (n2); \
- asm volatile(LOCK_PREFIX "cmpxchg16b %2;setz %1" \
- : "=d"(__junk), "=a"(__ret), "+m" (*ptr) \
- : "b"(__new1), "c"(__new2), \
- "a"(__old1), "d"(__old2)); \
- __ret; })
-
-
-#define cmpxchg16b_local(ptr, o1, o2, n1, n2) \
-({ \
- char __ret; \
- __typeof__(o2) __junk; \
- __typeof__(*(ptr)) __old1 = (o1); \
- __typeof__(o2) __old2 = (o2); \
- __typeof__(*(ptr)) __new1 = (n1); \
- __typeof__(o2) __new2 = (n2); \
- asm volatile("cmpxchg16b %2;setz %1" \
- : "=d"(__junk), "=a"(__ret), "+m" (*ptr) \
- : "b"(__new1), "c"(__new2), \
- "a"(__old1), "d"(__old2)); \
- __ret; })
-
-#define cmpxchg_double(ptr, o1, o2, n1, n2) \
-({ \
- BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
- VM_BUG_ON((unsigned long)(ptr) % 16); \
- cmpxchg16b((ptr), (o1), (o2), (n1), (n2)); \
-})
-
-#define cmpxchg_double_local(ptr, o1, o2, n1, n2) \
-({ \
- BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
- VM_BUG_ON((unsigned long)(ptr) % 16); \
- cmpxchg16b_local((ptr), (o1), (o2), (n1), (n2)); \
-})
-
#define system_has_cmpxchg_double() cpu_has_cx16
#endif /* _ASM_X86_CMPXCHG_64_H */
diff --git a/arch/x86/include/asm/div64.h b/arch/x86/include/asm/div64.h
index 9a2d644..ced283a 100644
--- a/arch/x86/include/asm/div64.h
+++ b/arch/x86/include/asm/div64.h
@@ -4,6 +4,7 @@
#ifdef CONFIG_X86_32
#include <linux/types.h>
+#include <linux/log2.h>
/*
* do_div() is NOT a C function. It wants to return
@@ -21,15 +22,20 @@
({ \
unsigned long __upper, __low, __high, __mod, __base; \
__base = (base); \
- asm("":"=a" (__low), "=d" (__high) : "A" (n)); \
- __upper = __high; \
- if (__high) { \
- __upper = __high % (__base); \
- __high = __high / (__base); \
+ if (__builtin_constant_p(__base) && is_power_of_2(__base)) { \
+ __mod = n & (__base - 1); \
+ n >>= ilog2(__base); \
+ } else { \
+ asm("" : "=a" (__low), "=d" (__high) : "A" (n));\
+ __upper = __high; \
+ if (__high) { \
+ __upper = __high % (__base); \
+ __high = __high / (__base); \
+ } \
+ asm("divl %2" : "=a" (__low), "=d" (__mod) \
+ : "rm" (__base), "0" (__low), "1" (__upper)); \
+ asm("" : "=A" (n) : "a" (__low), "d" (__high)); \
} \
- asm("divl %2":"=a" (__low), "=d" (__mod) \
- : "rm" (__base), "0" (__low), "1" (__upper)); \
- asm("":"=A" (n) : "a" (__low), "d" (__high)); \
__mod; \
})
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 908b969..3778256 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -117,7 +117,7 @@
extern unsigned long e820_end_of_ram_pfn(void);
extern unsigned long e820_end_of_low_ram_pfn(void);
-extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+extern u64 early_reserve_e820(u64 sizet, u64 align);
void memblock_x86_fill(void);
void memblock_find_dma_reserve(void);
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 55e4de6..da0b3ca 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -11,6 +11,7 @@
#ifdef CONFIG_X86_LOCAL_APIC
unsigned int apic_timer_irqs; /* arch dependent */
unsigned int irq_spurious_count;
+ unsigned int icr_read_retry_count;
#endif
unsigned int x86_platform_ipis; /* arch dependent */
unsigned int apic_perf_irqs;
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index c9e09ea..6919e93 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -218,7 +218,7 @@
#ifdef CONFIG_SMP
#define safe_address (__per_cpu_offset[0])
#else
-#define safe_address (kstat_cpu(0).cpustat.user)
+#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
#endif
/*
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
index 88c765e..74df3f1 100644
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -137,6 +137,13 @@
return (insn->vex_prefix.value != 0);
}
+/* Ensure this instruction is decoded completely */
+static inline int insn_complete(struct insn *insn)
+{
+ return insn->opcode.got && insn->modrm.got && insn->sib.got &&
+ insn->displacement.got && insn->immediate.got;
+}
+
static inline insn_byte_t insn_vex_m_bits(struct insn *insn)
{
if (insn->vex_prefix.nbytes == 2) /* 2 bytes VEX */
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 4420993..925b605 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -3,11 +3,15 @@
#include <linux/notifier.h>
-#define IPCMSG_VRTC 0xFA /* Set vRTC device */
+#define IPCMSG_WARM_RESET 0xF0
+#define IPCMSG_COLD_RESET 0xF1
+#define IPCMSG_SOFT_RESET 0xF2
+#define IPCMSG_COLD_BOOT 0xF3
-/* Command id associated with message IPCMSG_VRTC */
-#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
-#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
+#define IPCMSG_VRTC 0xFA /* Set vRTC device */
+ /* Command id associated with message IPCMSG_VRTC */
+ #define IPC_CMD_VRTC_SETTIME 1 /* Set time */
+ #define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
/* Read single register */
int intel_scu_ipc_ioread8(u16 addr, u8 *data);
diff --git a/arch/x86/include/asm/mach_timer.h b/arch/x86/include/asm/mach_timer.h
index 8537285..88d0c3c 100644
--- a/arch/x86/include/asm/mach_timer.h
+++ b/arch/x86/include/asm/mach_timer.h
@@ -15,7 +15,7 @@
#define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
#define CALIBRATE_LATCH \
- ((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
+ ((PIT_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
static inline void mach_prepare_counter(void)
{
diff --git a/arch/x86/include/asm/mc146818rtc.h b/arch/x86/include/asm/mc146818rtc.h
index 01fdf56..0e8e85b 100644
--- a/arch/x86/include/asm/mc146818rtc.h
+++ b/arch/x86/include/asm/mc146818rtc.h
@@ -81,8 +81,8 @@
#else
#define lock_cmos_prefix(reg) do {} while (0)
#define lock_cmos_suffix(reg) do {} while (0)
-#define lock_cmos(reg)
-#define unlock_cmos()
+#define lock_cmos(reg) do { } while (0)
+#define unlock_cmos() do { } while (0)
#define do_i_have_lock_cmos() 0
#define current_lock_cmos_reg() 0
#endif
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 0e8ae57..f35ce43 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -50,10 +50,11 @@
#define MCJ_CTX_MASK 3
#define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK)
#define MCJ_CTX_RANDOM 0 /* inject context: random */
-#define MCJ_CTX_PROCESS 1 /* inject context: process */
-#define MCJ_CTX_IRQ 2 /* inject context: IRQ */
-#define MCJ_NMI_BROADCAST 4 /* do NMI broadcasting */
-#define MCJ_EXCEPTION 8 /* raise as exception */
+#define MCJ_CTX_PROCESS 0x1 /* inject context: process */
+#define MCJ_CTX_IRQ 0x2 /* inject context: IRQ */
+#define MCJ_NMI_BROADCAST 0x4 /* do NMI broadcasting */
+#define MCJ_EXCEPTION 0x8 /* raise as exception */
+#define MCJ_IRQ_BRAODCAST 0x10 /* do IRQ broadcasting */
/* Fields are zero when not available */
struct mce {
@@ -120,7 +121,8 @@
#ifdef __KERNEL__
-extern struct atomic_notifier_head x86_mce_decoder_chain;
+extern void mce_register_decode_chain(struct notifier_block *nb);
+extern void mce_unregister_decode_chain(struct notifier_block *nb);
#include <linux/percpu.h>
#include <linux/init.h>
@@ -149,7 +151,7 @@
void mce_setup(struct mce *m);
void mce_log(struct mce *m);
-DECLARE_PER_CPU(struct sys_device, mce_sysdev);
+DECLARE_PER_CPU(struct device, mce_device);
/*
* Maximum banks number.
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
deleted file mode 100644
index 0cd3800..0000000
--- a/arch/x86/include/asm/memblock.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _X86_MEMBLOCK_H
-#define _X86_MEMBLOCK_H
-
-#define ARCH_DISCARD_MEMBLOCK
-
-u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align);
-
-void memblock_x86_reserve_range(u64 start, u64 end, char *name);
-void memblock_x86_free_range(u64 start, u64 end);
-struct range;
-int __get_free_all_memory_range(struct range **range, int nodeid,
- unsigned long start_pfn, unsigned long end_pfn);
-int get_free_all_memory_range(struct range **rangep, int nodeid);
-
-void memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
- unsigned long last_pfn);
-u64 memblock_x86_hole_size(u64 start, u64 end);
-u64 memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align);
-u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
-u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
-bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align);
-
-#endif
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 2421507..4ebe157 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -48,6 +48,7 @@
#ifdef CONFIG_MICROCODE_AMD
extern struct microcode_ops * __init init_amd_microcode(void);
+extern void __exit exit_amd_microcode(void);
static inline void get_ucode_data(void *to, const u8 *from, size_t n)
{
@@ -59,6 +60,7 @@
{
return NULL;
}
+static inline void __exit exit_amd_microcode(void) {}
#endif
#endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index e628312..93f7909 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -31,11 +31,20 @@
};
extern enum mrst_cpu_type __mrst_cpu_chip;
+
+#ifdef CONFIG_X86_INTEL_MID
+
static inline enum mrst_cpu_type mrst_identify_cpu(void)
{
return __mrst_cpu_chip;
}
+#else /* !CONFIG_X86_INTEL_MID */
+
+#define mrst_identify_cpu() (0)
+
+#endif /* !CONFIG_X86_INTEL_MID */
+
enum mrst_timer_options {
MRST_TIMER_DEFAULT,
MRST_TIMER_APBT_ONLY,
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 084ef95..95203d4 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -169,7 +169,14 @@
return native_write_msr_safe(msr, low, high);
}
-/* rdmsr with exception handling */
+/*
+ * rdmsr with exception handling.
+ *
+ * Please note that the exception handling works only after we've
+ * switched to the "smart" #GP handler in trap_init() which knows about
+ * exception tables - using this macro earlier than that causes machine
+ * hangs on boxes which do not implement the @msr in the first argument.
+ */
#define rdmsr_safe(msr, p1, p2) \
({ \
int __err; \
diff --git a/arch/x86/include/asm/numachip/numachip_csr.h b/arch/x86/include/asm/numachip/numachip_csr.h
new file mode 100644
index 0000000..660f843
--- /dev/null
+++ b/arch/x86/include/asm/numachip/numachip_csr.h
@@ -0,0 +1,167 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Numascale NumaConnect-Specific Header file
+ *
+ * Copyright (C) 2011 Numascale AS. All rights reserved.
+ *
+ * Send feedback to <support@numascale.com>
+ *
+ */
+
+#ifndef _ASM_X86_NUMACHIP_NUMACHIP_CSR_H
+#define _ASM_X86_NUMACHIP_NUMACHIP_CSR_H
+
+#include <linux/numa.h>
+#include <linux/percpu.h>
+#include <linux/io.h>
+#include <linux/swab.h>
+#include <asm/types.h>
+#include <asm/processor.h>
+
+#define CSR_NODE_SHIFT 16
+#define CSR_NODE_BITS(p) (((unsigned long)(p)) << CSR_NODE_SHIFT)
+#define CSR_NODE_MASK 0x0fff /* 4K nodes */
+
+/* 32K CSR space, b15 indicates geo/non-geo */
+#define CSR_OFFSET_MASK 0x7fffUL
+
+/* Global CSR space covers all 4K possible nodes with 64K CSR space per node */
+#define NUMACHIP_GCSR_BASE 0x3fff00000000ULL
+#define NUMACHIP_GCSR_LIM 0x3fff0fffffffULL
+#define NUMACHIP_GCSR_SIZE (NUMACHIP_GCSR_LIM - NUMACHIP_GCSR_BASE + 1)
+
+/*
+ * Local CSR space starts in global CSR space with "nodeid" = 0xfff0, however
+ * when using the direct mapping on x86_64, both start and size needs to be
+ * aligned with PMD_SIZE which is 2M
+ */
+#define NUMACHIP_LCSR_BASE 0x3ffffe000000ULL
+#define NUMACHIP_LCSR_LIM 0x3fffffffffffULL
+#define NUMACHIP_LCSR_SIZE (NUMACHIP_LCSR_LIM - NUMACHIP_LCSR_BASE + 1)
+
+static inline void *gcsr_address(int node, unsigned long offset)
+{
+ return __va(NUMACHIP_GCSR_BASE | (1UL << 15) |
+ CSR_NODE_BITS(node & CSR_NODE_MASK) | (offset & CSR_OFFSET_MASK));
+}
+
+static inline void *lcsr_address(unsigned long offset)
+{
+ return __va(NUMACHIP_LCSR_BASE | (1UL << 15) |
+ CSR_NODE_BITS(0xfff0) | (offset & CSR_OFFSET_MASK));
+}
+
+static inline unsigned int read_gcsr(int node, unsigned long offset)
+{
+ return swab32(readl(gcsr_address(node, offset)));
+}
+
+static inline void write_gcsr(int node, unsigned long offset, unsigned int val)
+{
+ writel(swab32(val), gcsr_address(node, offset));
+}
+
+static inline unsigned int read_lcsr(unsigned long offset)
+{
+ return swab32(readl(lcsr_address(offset)));
+}
+
+static inline void write_lcsr(unsigned long offset, unsigned int val)
+{
+ writel(swab32(val), lcsr_address(offset));
+}
+
+/* ========================================================================= */
+/* CSR_G0_STATE_CLEAR */
+/* ========================================================================= */
+
+#define CSR_G0_STATE_CLEAR (0x000 + (0 << 12))
+union numachip_csr_g0_state_clear {
+ unsigned int v;
+ struct numachip_csr_g0_state_clear_s {
+ unsigned int _state:2;
+ unsigned int _rsvd_2_6:5;
+ unsigned int _lost:1;
+ unsigned int _rsvd_8_31:24;
+ } s;
+};
+
+/* ========================================================================= */
+/* CSR_G0_NODE_IDS */
+/* ========================================================================= */
+
+#define CSR_G0_NODE_IDS (0x008 + (0 << 12))
+union numachip_csr_g0_node_ids {
+ unsigned int v;
+ struct numachip_csr_g0_node_ids_s {
+ unsigned int _initialid:16;
+ unsigned int _nodeid:12;
+ unsigned int _rsvd_28_31:4;
+ } s;
+};
+
+/* ========================================================================= */
+/* CSR_G3_EXT_IRQ_GEN */
+/* ========================================================================= */
+
+#define CSR_G3_EXT_IRQ_GEN (0x030 + (3 << 12))
+union numachip_csr_g3_ext_irq_gen {
+ unsigned int v;
+ struct numachip_csr_g3_ext_irq_gen_s {
+ unsigned int _vector:8;
+ unsigned int _msgtype:3;
+ unsigned int _index:5;
+ unsigned int _destination_apic_id:16;
+ } s;
+};
+
+/* ========================================================================= */
+/* CSR_G3_EXT_IRQ_STATUS */
+/* ========================================================================= */
+
+#define CSR_G3_EXT_IRQ_STATUS (0x034 + (3 << 12))
+union numachip_csr_g3_ext_irq_status {
+ unsigned int v;
+ struct numachip_csr_g3_ext_irq_status_s {
+ unsigned int _result:32;
+ } s;
+};
+
+/* ========================================================================= */
+/* CSR_G3_EXT_IRQ_DEST */
+/* ========================================================================= */
+
+#define CSR_G3_EXT_IRQ_DEST (0x038 + (3 << 12))
+union numachip_csr_g3_ext_irq_dest {
+ unsigned int v;
+ struct numachip_csr_g3_ext_irq_dest_s {
+ unsigned int _irq:8;
+ unsigned int _rsvd_8_31:24;
+ } s;
+};
+
+/* ========================================================================= */
+/* CSR_G3_NC_ATT_MAP_SELECT */
+/* ========================================================================= */
+
+#define CSR_G3_NC_ATT_MAP_SELECT (0x7fc + (3 << 12))
+union numachip_csr_g3_nc_att_map_select {
+ unsigned int v;
+ struct numachip_csr_g3_nc_att_map_select_s {
+ unsigned int _upper_address_bits:4;
+ unsigned int _select_ram:4;
+ unsigned int _rsvd_8_31:24;
+ } s;
+};
+
+/* ========================================================================= */
+/* CSR_G3_NC_ATT_MAP_SELECT_0-255 */
+/* ========================================================================= */
+
+#define CSR_G3_NC_ATT_MAP_SELECT_0 (0x800 + (3 << 12))
+
+#endif /* _ASM_X86_NUMACHIP_NUMACHIP_CSR_H */
+
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 3470c9d..529bf07e 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -451,23 +451,20 @@
#endif /* !CONFIG_M386 */
#ifdef CONFIG_X86_CMPXCHG64
-#define percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) \
+#define percpu_cmpxchg8b_double(pcp1, pcp2, o1, o2, n1, n2) \
({ \
- char __ret; \
- typeof(o1) __o1 = o1; \
- typeof(o1) __n1 = n1; \
- typeof(o2) __o2 = o2; \
- typeof(o2) __n2 = n2; \
- typeof(o2) __dummy = n2; \
+ bool __ret; \
+ typeof(pcp1) __o1 = (o1), __n1 = (n1); \
+ typeof(pcp2) __o2 = (o2), __n2 = (n2); \
asm volatile("cmpxchg8b "__percpu_arg(1)"\n\tsetz %0\n\t" \
- : "=a"(__ret), "=m" (pcp1), "=d"(__dummy) \
- : "b"(__n1), "c"(__n2), "a"(__o1), "d"(__o2)); \
+ : "=a" (__ret), "+m" (pcp1), "+m" (pcp2), "+d" (__o2) \
+ : "b" (__n1), "c" (__n2), "a" (__o1)); \
__ret; \
})
-#define __this_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2)
-#define this_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2)
-#define irqsafe_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2)
+#define __this_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double
+#define this_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double
+#define irqsafe_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double
#endif /* CONFIG_X86_CMPXCHG64 */
/*
@@ -508,31 +505,23 @@
* it in software. The address used in the cmpxchg16 instruction must be
* aligned to a 16 byte boundary.
*/
-#ifdef CONFIG_SMP
-#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP3
-#else
-#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP2
-#endif
-#define percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) \
+#define percpu_cmpxchg16b_double(pcp1, pcp2, o1, o2, n1, n2) \
({ \
- char __ret; \
- typeof(o1) __o1 = o1; \
- typeof(o1) __n1 = n1; \
- typeof(o2) __o2 = o2; \
- typeof(o2) __n2 = n2; \
- typeof(o2) __dummy; \
- alternative_io(CMPXCHG16B_EMU_CALL, \
- "cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t", \
+ bool __ret; \
+ typeof(pcp1) __o1 = (o1), __n1 = (n1); \
+ typeof(pcp2) __o2 = (o2), __n2 = (n2); \
+ alternative_io("leaq %P1,%%rsi\n\tcall this_cpu_cmpxchg16b_emu\n\t", \
+ "cmpxchg16b " __percpu_arg(1) "\n\tsetz %0\n\t", \
X86_FEATURE_CX16, \
- ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)), \
- "S" (&pcp1), "b"(__n1), "c"(__n2), \
- "a"(__o1), "d"(__o2) : "memory"); \
+ ASM_OUTPUT2("=a" (__ret), "+m" (pcp1), \
+ "+m" (pcp2), "+d" (__o2)), \
+ "b" (__n1), "c" (__n2), "a" (__o1) : "rsi"); \
__ret; \
})
-#define __this_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2)
-#define this_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2)
-#define irqsafe_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2)
+#define __this_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double
+#define this_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double
+#define irqsafe_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double
#endif
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index f61c62f..096c975 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -57,6 +57,7 @@
(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
#define ARCH_PERFMON_BRANCH_MISSES_RETIRED 6
+#define ARCH_PERFMON_EVENTS_COUNT 7
/*
* Intel "Architectural Performance Monitoring" CPUID
@@ -72,6 +73,19 @@
unsigned int full;
};
+union cpuid10_ebx {
+ struct {
+ unsigned int no_unhalted_core_cycles:1;
+ unsigned int no_instructions_retired:1;
+ unsigned int no_unhalted_reference_cycles:1;
+ unsigned int no_llc_reference:1;
+ unsigned int no_llc_misses:1;
+ unsigned int no_branch_instruction_retired:1;
+ unsigned int no_branch_misses_retired:1;
+ } split;
+ unsigned int full;
+};
+
union cpuid10_edx {
struct {
unsigned int num_counters_fixed:5;
@@ -81,6 +95,15 @@
unsigned int full;
};
+struct x86_pmu_capability {
+ int version;
+ int num_counters_gp;
+ int num_counters_fixed;
+ int bit_width_gp;
+ int bit_width_fixed;
+ unsigned int events_mask;
+ int events_mask_len;
+};
/*
* Fixed-purpose performance events:
@@ -89,23 +112,24 @@
/*
* All 3 fixed-mode PMCs are configured via this single MSR:
*/
-#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL 0x38d
+#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL 0x38d
/*
* The counts are available in three separate MSRs:
*/
/* Instr_Retired.Any: */
-#define MSR_ARCH_PERFMON_FIXED_CTR0 0x309
-#define X86_PMC_IDX_FIXED_INSTRUCTIONS (X86_PMC_IDX_FIXED + 0)
+#define MSR_ARCH_PERFMON_FIXED_CTR0 0x309
+#define X86_PMC_IDX_FIXED_INSTRUCTIONS (X86_PMC_IDX_FIXED + 0)
/* CPU_CLK_Unhalted.Core: */
-#define MSR_ARCH_PERFMON_FIXED_CTR1 0x30a
-#define X86_PMC_IDX_FIXED_CPU_CYCLES (X86_PMC_IDX_FIXED + 1)
+#define MSR_ARCH_PERFMON_FIXED_CTR1 0x30a
+#define X86_PMC_IDX_FIXED_CPU_CYCLES (X86_PMC_IDX_FIXED + 1)
/* CPU_CLK_Unhalted.Ref: */
-#define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b
-#define X86_PMC_IDX_FIXED_BUS_CYCLES (X86_PMC_IDX_FIXED + 2)
+#define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b
+#define X86_PMC_IDX_FIXED_REF_CYCLES (X86_PMC_IDX_FIXED + 2)
+#define X86_PMC_MSK_FIXED_REF_CYCLES (1ULL << X86_PMC_IDX_FIXED_REF_CYCLES)
/*
* We model BTS tracing as another fixed-mode PMC.
@@ -202,6 +226,7 @@
};
extern struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr);
+extern void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap);
#else
static inline perf_guest_switch_msr *perf_guest_get_msrs(int *nr)
{
@@ -209,6 +234,11 @@
return NULL;
}
+static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
+{
+ memset(cap, 0, sizeof(*cap));
+}
+
static inline void perf_events_lapic_init(void) { }
#endif
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 18601c8..49afb3f 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -703,7 +703,7 @@
pte_update(mm, addr, ptep);
}
-#define flush_tlb_fix_spurious_fault(vma, address)
+#define flush_tlb_fix_spurious_fault(vma, address) do { } while (0)
#define mk_pmd(page, pgprot) pfn_pmd(page_to_pfn(page), (pgprot))
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
index 2dddb31..f8ab3ea 100644
--- a/arch/x86/include/asm/processor-flags.h
+++ b/arch/x86/include/asm/processor-flags.h
@@ -6,6 +6,7 @@
* EFLAGS bits
*/
#define X86_EFLAGS_CF 0x00000001 /* Carry Flag */
+#define X86_EFLAGS_BIT1 0x00000002 /* Bit 1 - always on */
#define X86_EFLAGS_PF 0x00000004 /* Parity Flag */
#define X86_EFLAGS_AF 0x00000010 /* Auxiliary carry Flag */
#define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index b650435..aa9088c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -99,7 +99,6 @@
u16 apicid;
u16 initial_apicid;
u16 x86_clflush_size;
-#ifdef CONFIG_SMP
/* number of cores as seen by the OS: */
u16 booted_cores;
/* Physical processor id: */
@@ -110,7 +109,6 @@
u8 compute_unit_id;
/* Index into per_cpu list: */
u16 cpu_index;
-#endif
u32 microcode;
} __attribute__((__aligned__(SMP_CACHE_BYTES)));
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 972c260..a82c2bf 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -79,23 +79,10 @@
return cmpxchg(&lock->head_tail, old.head_tail, new.head_tail) == old.head_tail;
}
-#if (NR_CPUS < 256)
static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock)
{
- asm volatile(UNLOCK_LOCK_PREFIX "incb %0"
- : "+m" (lock->head_tail)
- :
- : "memory", "cc");
+ __add(&lock->tickets.head, 1, UNLOCK_LOCK_PREFIX);
}
-#else
-static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock)
-{
- asm volatile(UNLOCK_LOCK_PREFIX "incw %0"
- : "+m" (lock->head_tail)
- :
- : "memory", "cc");
-}
-#endif
static inline int __ticket_spin_is_locked(arch_spinlock_t *lock)
{
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index c2ff2a1..2d2f01c 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -401,6 +401,7 @@
extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
void default_idle(void);
+bool set_pm_idle_to_default(void);
void stop_this_cpu(void *dummy);
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index a1fe5c1..7404715 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -40,7 +40,8 @@
*/
__u8 supervisor_stack[0];
#endif
- int uaccess_err;
+ int sig_on_uaccess_error:1;
+ int uaccess_err:1; /* uaccess failed */
};
#define INIT_THREAD_INFO(tsk) \
@@ -90,7 +91,6 @@
#define TIF_MEMDIE 20 /* is terminating due to OOM killer */
#define TIF_DEBUG 21 /* uses debug registers */
#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
-#define TIF_FREEZE 23 /* is freezing for suspend */
#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */
#define TIF_BLOCKSTEP 25 /* set when we want DEBUGCTLMSR_BTF */
#define TIF_LAZY_MMU_UPDATES 27 /* task is updating the mmu lazily */
@@ -112,7 +112,6 @@
#define _TIF_FORK (1 << TIF_FORK)
#define _TIF_DEBUG (1 << TIF_DEBUG)
#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_FORCED_TF (1 << TIF_FORCED_TF)
#define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP)
#define _TIF_LAZY_MMU_UPDATES (1 << TIF_LAZY_MMU_UPDATES)
@@ -231,6 +230,12 @@
movq PER_CPU_VAR(kernel_stack),reg ; \
subq $(THREAD_SIZE-KERNEL_STACK_OFFSET),reg
+/*
+ * Same if PER_CPU_VAR(kernel_stack) is, perhaps with some offset, already in
+ * a certain register (to be used in assembler memory operands).
+ */
+#define THREAD_INFO(reg, off) KERNEL_STACK_OFFSET+(off)-THREAD_SIZE(reg)
+
#endif
#endif /* !X86_32 */
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index fa7b917..431793e 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -32,6 +32,22 @@
* (mathieu.desnoyers@polymtl.ca)
*
* -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ *
+ * In:
+ *
+ * ns = cycles * cyc2ns_scale / SC
+ *
+ * Although we may still have enough bits to store the value of ns,
+ * in some cases, we may not have enough bits to store cycles * cyc2ns_scale,
+ * leading to an incorrect result.
+ *
+ * To avoid this, we can decompose 'cycles' into quotient and remainder
+ * of division by SC. Then,
+ *
+ * ns = (quot * SC + rem) * cyc2ns_scale / SC
+ * = quot * cyc2ns_scale + (rem * cyc2ns_scale) / SC
+ *
+ * - sqazi@google.com
*/
DECLARE_PER_CPU(unsigned long, cyc2ns);
@@ -41,9 +57,14 @@
static inline unsigned long long __cycles_2_ns(unsigned long long cyc)
{
+ unsigned long long quot;
+ unsigned long long rem;
int cpu = smp_processor_id();
unsigned long long ns = per_cpu(cyc2ns_offset, cpu);
- ns += cyc * per_cpu(cyc2ns, cpu) >> CYC2NS_SCALE_FACTOR;
+ quot = (cyc >> CYC2NS_SCALE_FACTOR);
+ rem = cyc & ((1ULL << CYC2NS_SCALE_FACTOR) - 1);
+ ns += quot * per_cpu(cyc2ns, cpu) +
+ ((rem * per_cpu(cyc2ns, cpu)) >> CYC2NS_SCALE_FACTOR);
return ns;
}
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index c006924..800f77c 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -130,10 +130,8 @@
.balance_interval = 1, \
}
-#ifdef CONFIG_X86_64
extern int __node_distance(int, int);
#define node_distance(a, b) __node_distance(a, b)
-#endif
#else /* !CONFIG_NUMA */
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 83e2efd..15d9915 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -51,6 +51,8 @@
extern int check_tsc_unstable(void);
extern unsigned long native_calibrate_tsc(void);
+extern int tsc_clocksource_reliable;
+
/*
* Boot-time check whether the TSCs are synchronized across
* all CPUs/cores:
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 36361bf..8be5f54 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -462,7 +462,7 @@
barrier();
#define uaccess_catch(err) \
- (err) |= current_thread_info()->uaccess_err; \
+ (err) |= (current_thread_info()->uaccess_err ? -EFAULT : 0); \
current_thread_info()->uaccess_err = prev_err; \
} while (0)
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index 10474fb..cf1d736 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -57,6 +57,7 @@
#define UV1_HUB_PART_NUMBER 0x88a5
#define UV2_HUB_PART_NUMBER 0x8eb8
+#define UV2_HUB_PART_NUMBER_X 0x1111
/* Compat: if this #define is present, UV headers support UV2 */
#define UV2_HUB_IS_SUPPORTED 1
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 1971e65..1ac860a 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -7,6 +7,7 @@
struct mpc_bus;
struct mpc_cpu;
struct mpc_table;
+struct cpuinfo_x86;
/**
* struct x86_init_mpparse - platform specific mpparse ops
@@ -147,6 +148,7 @@
*/
struct x86_cpuinit_ops {
void (*setup_percpu_clockev)(void);
+ void (*fixup_cpu_id)(struct cpuinfo_x86 *c, int node);
};
/**
@@ -186,5 +188,6 @@
extern void x86_init_noop(void);
extern void x86_init_uint_noop(unsigned int unused);
+extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node);
#endif
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 4558f0d..ce664f3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -219,6 +219,8 @@
acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
{
struct acpi_madt_local_x2apic *processor = NULL;
+ int apic_id;
+ u8 enabled;
processor = (struct acpi_madt_local_x2apic *)header;
@@ -227,6 +229,8 @@
acpi_table_print_madt_entry(header);
+ apic_id = processor->local_apic_id;
+ enabled = processor->lapic_flags & ACPI_MADT_ENABLED;
#ifdef CONFIG_X86_X2APIC
/*
* We need to register disabled CPU as well to permit
@@ -235,8 +239,10 @@
* to not preallocating memory for all NR_CPUS
* when we use CPU hotplug.
*/
- acpi_register_lapic(processor->local_apic_id, /* APIC ID */
- processor->lapic_flags & ACPI_MADT_ENABLED);
+ if (!cpu_has_x2apic && (apic_id >= 0xff) && enabled)
+ printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
+ else
+ acpi_register_lapic(apic_id, enabled);
#else
printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
#endif
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 4c39baa..013c181 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -123,16 +123,14 @@
{
struct pci_dev *link = node_to_amd_nb(amd_get_nb_id(cpu))->link;
unsigned int mask;
- int cuid = 0;
+ int cuid;
if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING))
return 0;
pci_read_config_dword(link, 0x1d4, &mask);
-#ifdef CONFIG_SMP
cuid = cpu_data(cpu).compute_unit_id;
-#endif
return (mask >> (4 * cuid)) & 0xf;
}
@@ -141,7 +139,7 @@
static unsigned int reset, ban;
struct amd_northbridge *nb = node_to_amd_nb(amd_get_nb_id(cpu));
unsigned int reg;
- int cuid = 0;
+ int cuid;
if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING) || mask > 0xf)
return -EINVAL;
@@ -159,9 +157,7 @@
pci_write_config_dword(nb->misc, 0x1b8, reg & ~0x180000);
}
-#ifdef CONFIG_SMP
cuid = cpu_data(cpu).compute_unit_id;
-#endif
mask <<= 4 * cuid;
mask |= (0xf ^ (1 << cuid)) << 26;
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 3d2661c..6e76c19 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -88,13 +88,13 @@
*/
addr = memblock_find_in_range(GART_MIN_ADDR, GART_MAX_ADDR,
aper_size, aper_size);
- if (addr == MEMBLOCK_ERROR || addr + aper_size > GART_MAX_ADDR) {
+ if (!addr || addr + aper_size > GART_MAX_ADDR) {
printk(KERN_ERR
"Cannot allocate aperture memory hole (%lx,%uK)\n",
addr, aper_size>>10);
return 0;
}
- memblock_x86_reserve_range(addr, addr + aper_size, "aperture64");
+ memblock_reserve(addr, aper_size);
/*
* Kmemleak should not scan this block as it may not be mapped via the
* kernel direct mapping.
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 767fd04..0ae0323 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -10,6 +10,7 @@
ifeq ($(CONFIG_X86_64),y)
# APIC probe will depend on the listing order here
+obj-$(CONFIG_X86_NUMACHIP) += apic_numachip.o
obj-$(CONFIG_X86_UV) += x2apic_uv_x.o
obj-$(CONFIG_X86_X2APIC) += x2apic_phys.o
obj-$(CONFIG_X86_X2APIC) += x2apic_cluster.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index f98d84c..2eec05b 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -146,16 +146,26 @@
int x2apic_mode;
#ifdef CONFIG_X86_X2APIC
/* x2apic enabled before OS handover */
-static int x2apic_preenabled;
+int x2apic_preenabled;
+static int x2apic_disabled;
+static int nox2apic;
static __init int setup_nox2apic(char *str)
{
if (x2apic_enabled()) {
- pr_warning("Bios already enabled x2apic, "
- "can't enforce nox2apic");
- return 0;
- }
+ int apicid = native_apic_msr_read(APIC_ID);
- setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+ if (apicid >= 255) {
+ pr_warning("Apicid: %08x, cannot enforce nox2apic\n",
+ apicid);
+ return 0;
+ }
+
+ pr_warning("x2apic already enabled. will disable it\n");
+ } else
+ setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+
+ nox2apic = 1;
+
return 0;
}
early_param("nox2apic", setup_nox2apic);
@@ -250,6 +260,7 @@
send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
if (!send_status)
break;
+ inc_irq_stat(icr_read_retry_count);
udelay(100);
} while (timeout++ < 1000);
@@ -876,8 +887,8 @@
* Besides, if we don't timer interrupts ignore the global
* interrupt lock, which is the WrongThing (tm) to do.
*/
- exit_idle();
irq_enter();
+ exit_idle();
local_apic_timer_interrupt();
irq_exit();
@@ -1431,6 +1442,45 @@
}
#ifdef CONFIG_X86_X2APIC
+/*
+ * Need to disable xapic and x2apic at the same time and then enable xapic mode
+ */
+static inline void __disable_x2apic(u64 msr)
+{
+ wrmsrl(MSR_IA32_APICBASE,
+ msr & ~(X2APIC_ENABLE | XAPIC_ENABLE));
+ wrmsrl(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE);
+}
+
+static __init void disable_x2apic(void)
+{
+ u64 msr;
+
+ if (!cpu_has_x2apic)
+ return;
+
+ rdmsrl(MSR_IA32_APICBASE, msr);
+ if (msr & X2APIC_ENABLE) {
+ u32 x2apic_id = read_apic_id();
+
+ if (x2apic_id >= 255)
+ panic("Cannot disable x2apic, id: %08x\n", x2apic_id);
+
+ pr_info("Disabling x2apic\n");
+ __disable_x2apic(msr);
+
+ if (nox2apic) {
+ clear_cpu_cap(&cpu_data(0), X86_FEATURE_X2APIC);
+ setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+ }
+
+ x2apic_disabled = 1;
+ x2apic_mode = 0;
+
+ register_lapic_address(mp_lapic_addr);
+ }
+}
+
void check_x2apic(void)
{
if (x2apic_enabled()) {
@@ -1441,15 +1491,20 @@
void enable_x2apic(void)
{
- int msr, msr2;
+ u64 msr;
+
+ rdmsrl(MSR_IA32_APICBASE, msr);
+ if (x2apic_disabled) {
+ __disable_x2apic(msr);
+ return;
+ }
if (!x2apic_mode)
return;
- rdmsr(MSR_IA32_APICBASE, msr, msr2);
if (!(msr & X2APIC_ENABLE)) {
printk_once(KERN_INFO "Enabling x2apic\n");
- wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, msr2);
+ wrmsrl(MSR_IA32_APICBASE, msr | X2APIC_ENABLE);
}
}
#endif /* CONFIG_X86_X2APIC */
@@ -1486,25 +1541,34 @@
ret = save_ioapic_entries();
if (ret) {
pr_info("Saving IO-APIC state failed: %d\n", ret);
- goto out;
+ return;
}
local_irq_save(flags);
legacy_pic->mask_all();
mask_ioapic_entries();
+ if (x2apic_preenabled && nox2apic)
+ disable_x2apic();
+
if (dmar_table_init_ret)
ret = -1;
else
ret = enable_IR();
+ if (!x2apic_supported())
+ goto skip_x2apic;
+
if (ret < 0) {
/* IR is required if there is APIC ID > 255 even when running
* under KVM
*/
if (max_physical_apicid > 255 ||
- !hypervisor_x2apic_available())
- goto nox2apic;
+ !hypervisor_x2apic_available()) {
+ if (x2apic_preenabled)
+ disable_x2apic();
+ goto skip_x2apic;
+ }
/*
* without IR all CPUs can be addressed by IOAPIC/MSI
* only in physical mode
@@ -1512,8 +1576,10 @@
x2apic_force_phys();
}
- if (ret == IRQ_REMAP_XAPIC_MODE)
- goto nox2apic;
+ if (ret == IRQ_REMAP_XAPIC_MODE) {
+ pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
+ goto skip_x2apic;
+ }
x2apic_enabled = 1;
@@ -1523,22 +1589,11 @@
pr_info("Enabled x2apic\n");
}
-nox2apic:
+skip_x2apic:
if (ret < 0) /* IR enabling failed */
restore_ioapic_entries();
legacy_pic->restore_mask();
local_irq_restore(flags);
-
-out:
- if (x2apic_enabled || !x2apic_supported())
- return;
-
- if (x2apic_preenabled)
- panic("x2apic: enabled by BIOS but kernel init failed.");
- else if (ret == IRQ_REMAP_XAPIC_MODE)
- pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
- else if (ret < 0)
- pr_info("x2apic not enabled, IRQ remapping init failed\n");
}
#ifdef CONFIG_X86_64
@@ -1809,8 +1864,8 @@
{
u32 v;
- exit_idle();
irq_enter();
+ exit_idle();
/*
* Check if this really is a spurious interrupt and ACK it
* if it is a vectored one. Just in case...
@@ -1846,8 +1901,8 @@
"Illegal register address", /* APIC Error Bit 7 */
};
- exit_idle();
irq_enter();
+ exit_idle();
/* First tickle the hardware, only then report what went on. -- REW */
v0 = apic_read(APIC_ESR);
apic_write(APIC_ESR, 0);
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index f7a41e4..8c3cdde 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -62,7 +62,7 @@
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
-static void flat_init_apic_ldr(void)
+void flat_init_apic_ldr(void)
{
unsigned long val;
unsigned long num, id;
@@ -171,9 +171,14 @@
return initial_apic_id >> index_msb;
}
+static int flat_probe(void)
+{
+ return 1;
+}
+
static struct apic apic_flat = {
.name = "flat",
- .probe = NULL,
+ .probe = flat_probe,
.acpi_madt_oem_check = flat_acpi_madt_oem_check,
.apic_id_registered = flat_apic_id_registered,
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
new file mode 100644
index 0000000..09d3d8c
--- /dev/null
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -0,0 +1,294 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Numascale NumaConnect-Specific APIC Code
+ *
+ * Copyright (C) 2011 Numascale AS. All rights reserved.
+ *
+ * Send feedback to <support@numascale.com>
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/hardirq.h>
+#include <linux/delay.h>
+
+#include <asm/numachip/numachip_csr.h>
+#include <asm/smp.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <asm/apic_flat_64.h>
+
+static int numachip_system __read_mostly;
+
+static struct apic apic_numachip __read_mostly;
+
+static unsigned int get_apic_id(unsigned long x)
+{
+ unsigned long value;
+ unsigned int id;
+
+ rdmsrl(MSR_FAM10H_NODE_ID, value);
+ id = ((x >> 24) & 0xffU) | ((value << 2) & 0x3f00U);
+
+ return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+ unsigned long x;
+
+ x = ((id & 0xffU) << 24);
+ return x;
+}
+
+static unsigned int read_xapic_id(void)
+{
+ return get_apic_id(apic_read(APIC_ID));
+}
+
+static int numachip_apic_id_registered(void)
+{
+ return physid_isset(read_xapic_id(), phys_cpu_present_map);
+}
+
+static int numachip_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+ return initial_apic_id >> index_msb;
+}
+
+static const struct cpumask *numachip_target_cpus(void)
+{
+ return cpu_online_mask;
+}
+
+static void numachip_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+ cpumask_clear(retmask);
+ cpumask_set_cpu(cpu, retmask);
+}
+
+static int __cpuinit numachip_wakeup_secondary(int phys_apicid, unsigned long start_rip)
+{
+ union numachip_csr_g3_ext_irq_gen int_gen;
+
+ int_gen.s._destination_apic_id = phys_apicid;
+ int_gen.s._vector = 0;
+ int_gen.s._msgtype = APIC_DM_INIT >> 8;
+ int_gen.s._index = 0;
+
+ write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
+
+ int_gen.s._msgtype = APIC_DM_STARTUP >> 8;
+ int_gen.s._vector = start_rip >> 12;
+
+ write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
+
+ atomic_set(&init_deasserted, 1);
+ return 0;
+}
+
+static void numachip_send_IPI_one(int cpu, int vector)
+{
+ union numachip_csr_g3_ext_irq_gen int_gen;
+ int apicid = per_cpu(x86_cpu_to_apicid, cpu);
+
+ int_gen.s._destination_apic_id = apicid;
+ int_gen.s._vector = vector;
+ int_gen.s._msgtype = (vector == NMI_VECTOR ? APIC_DM_NMI : APIC_DM_FIXED) >> 8;
+ int_gen.s._index = 0;
+
+ write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
+}
+
+static void numachip_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+ unsigned int cpu;
+
+ for_each_cpu(cpu, mask)
+ numachip_send_IPI_one(cpu, vector);
+}
+
+static void numachip_send_IPI_mask_allbutself(const struct cpumask *mask,
+ int vector)
+{
+ unsigned int this_cpu = smp_processor_id();
+ unsigned int cpu;
+
+ for_each_cpu(cpu, mask) {
+ if (cpu != this_cpu)
+ numachip_send_IPI_one(cpu, vector);
+ }
+}
+
+static void numachip_send_IPI_allbutself(int vector)
+{
+ unsigned int this_cpu = smp_processor_id();
+ unsigned int cpu;
+
+ for_each_online_cpu(cpu) {
+ if (cpu != this_cpu)
+ numachip_send_IPI_one(cpu, vector);
+ }
+}
+
+static void numachip_send_IPI_all(int vector)
+{
+ numachip_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static void numachip_send_IPI_self(int vector)
+{
+ __default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
+}
+
+static unsigned int numachip_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+ int cpu;
+
+ /*
+ * We're using fixed IRQ delivery, can only return one phys APIC ID.
+ * May as well be the first.
+ */
+ cpu = cpumask_first(cpumask);
+ if (likely((unsigned)cpu < nr_cpu_ids))
+ return per_cpu(x86_cpu_to_apicid, cpu);
+
+ return BAD_APICID;
+}
+
+static unsigned int
+numachip_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+ const struct cpumask *andmask)
+{
+ int cpu;
+
+ /*
+ * We're using fixed IRQ delivery, can only return one phys APIC ID.
+ * May as well be the first.
+ */
+ for_each_cpu_and(cpu, cpumask, andmask) {
+ if (cpumask_test_cpu(cpu, cpu_online_mask))
+ break;
+ }
+ return per_cpu(x86_cpu_to_apicid, cpu);
+}
+
+static int __init numachip_probe(void)
+{
+ return apic == &apic_numachip;
+}
+
+static void __init map_csrs(void)
+{
+ printk(KERN_INFO "NumaChip: Mapping local CSR space (%016llx - %016llx)\n",
+ NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_BASE + NUMACHIP_LCSR_SIZE - 1);
+ init_extra_mapping_uc(NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_SIZE);
+
+ printk(KERN_INFO "NumaChip: Mapping global CSR space (%016llx - %016llx)\n",
+ NUMACHIP_GCSR_BASE, NUMACHIP_GCSR_BASE + NUMACHIP_GCSR_SIZE - 1);
+ init_extra_mapping_uc(NUMACHIP_GCSR_BASE, NUMACHIP_GCSR_SIZE);
+}
+
+static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
+{
+ c->phys_proc_id = node;
+ per_cpu(cpu_llc_id, smp_processor_id()) = node;
+}
+
+static int __init numachip_system_init(void)
+{
+ unsigned int val;
+
+ if (!numachip_system)
+ return 0;
+
+ x86_cpuinit.fixup_cpu_id = fixup_cpu_id;
+
+ map_csrs();
+
+ val = read_lcsr(CSR_G0_NODE_IDS);
+ printk(KERN_INFO "NumaChip: Local NodeID = %08x\n", val);
+
+ return 0;
+}
+early_initcall(numachip_system_init);
+
+static int numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (!strncmp(oem_id, "NUMASC", 6)) {
+ numachip_system = 1;
+ return 1;
+ }
+
+ return 0;
+}
+
+static struct apic apic_numachip __refconst = {
+
+ .name = "NumaConnect system",
+ .probe = numachip_probe,
+ .acpi_madt_oem_check = numachip_acpi_madt_oem_check,
+ .apic_id_registered = numachip_apic_id_registered,
+
+ .irq_delivery_mode = dest_Fixed,
+ .irq_dest_mode = 0, /* physical */
+
+ .target_cpus = numachip_target_cpus,
+ .disable_esr = 0,
+ .dest_logical = 0,
+ .check_apicid_used = NULL,
+ .check_apicid_present = NULL,
+
+ .vector_allocation_domain = numachip_vector_allocation_domain,
+ .init_apic_ldr = flat_init_apic_ldr,
+
+ .ioapic_phys_id_map = NULL,
+ .setup_apic_routing = NULL,
+ .multi_timer_check = NULL,
+ .cpu_present_to_apicid = default_cpu_present_to_apicid,
+ .apicid_to_cpu_present = NULL,
+ .setup_portio_remap = NULL,
+ .check_phys_apicid_present = default_check_phys_apicid_present,
+ .enable_apic_mode = NULL,
+ .phys_pkg_id = numachip_phys_pkg_id,
+ .mps_oem_check = NULL,
+
+ .get_apic_id = get_apic_id,
+ .set_apic_id = set_apic_id,
+ .apic_id_mask = 0xffU << 24,
+
+ .cpu_mask_to_apicid = numachip_cpu_mask_to_apicid,
+ .cpu_mask_to_apicid_and = numachip_cpu_mask_to_apicid_and,
+
+ .send_IPI_mask = numachip_send_IPI_mask,
+ .send_IPI_mask_allbutself = numachip_send_IPI_mask_allbutself,
+ .send_IPI_allbutself = numachip_send_IPI_allbutself,
+ .send_IPI_all = numachip_send_IPI_all,
+ .send_IPI_self = numachip_send_IPI_self,
+
+ .wakeup_secondary_cpu = numachip_wakeup_secondary,
+ .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
+ .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
+ .wait_for_init_deassert = NULL,
+ .smp_callin_clear_local_apic = NULL,
+ .inquire_remote_apic = NULL, /* REMRD not supported */
+
+ .read = native_apic_mem_read,
+ .write = native_apic_mem_write,
+ .icr_read = native_apic_icr_read,
+ .icr_write = native_apic_icr_write,
+ .wait_icr_idle = native_apic_wait_icr_idle,
+ .safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
+};
+apic_driver(apic_numachip);
+
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 6d939d7..fb07275 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2421,8 +2421,8 @@
unsigned vector, me;
ack_APIC_irq();
- exit_idle();
irq_enter();
+ exit_idle();
me = smp_processor_id();
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
@@ -2948,6 +2948,10 @@
}
local_irq_disable();
apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+ if (x2apic_preenabled)
+ apic_printk(APIC_QUIET, KERN_INFO
+ "Perhaps problem with the pre-enabled x2apic mode\n"
+ "Try booting with x2apic and interrupt-remapping disabled in the bios.\n");
panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
"report. Then try booting with the 'noapic' option.\n");
out:
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 62ae300..9d59bba 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -93,6 +93,8 @@
if (node_id.s.part_number == UV2_HUB_PART_NUMBER)
uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
+ if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X)
+ uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
uv_hub_info->hub_revision = uv_min_hub_revision_id;
pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);
diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c
index 452932d..5da1269 100644
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -62,7 +62,8 @@
void __init setup_bios_corruption_check(void)
{
- u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */
+ phys_addr_t start, end;
+ u64 i;
if (memory_corruption_check == -1) {
memory_corruption_check =
@@ -82,28 +83,23 @@
corruption_check_size = round_up(corruption_check_size, PAGE_SIZE);
- while (addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) {
- u64 size;
- addr = memblock_x86_find_in_range_size(addr, &size, PAGE_SIZE);
+ for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
+ start = clamp_t(phys_addr_t, round_up(start, PAGE_SIZE),
+ PAGE_SIZE, corruption_check_size);
+ end = clamp_t(phys_addr_t, round_down(end, PAGE_SIZE),
+ PAGE_SIZE, corruption_check_size);
+ if (start >= end)
+ continue;
- if (addr == MEMBLOCK_ERROR)
- break;
-
- if (addr >= corruption_check_size)
- break;
-
- if ((addr + size) > corruption_check_size)
- size = corruption_check_size - addr;
-
- memblock_x86_reserve_range(addr, addr + size, "SCAN RAM");
- scan_areas[num_scan_areas].addr = addr;
- scan_areas[num_scan_areas].size = size;
- num_scan_areas++;
+ memblock_reserve(start, end - start);
+ scan_areas[num_scan_areas].addr = start;
+ scan_areas[num_scan_areas].size = end - start;
/* Assume we've already mapped this early memory */
- memset(__va(addr), 0, size);
+ memset(__va(start), 0, end - start);
- addr += size;
+ if (++num_scan_areas >= MAX_SCAN_AREAS)
+ break;
}
if (num_scan_areas)
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index c7e46cb..f4773f4 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -148,7 +148,6 @@
static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_SMP
/* calling is from identify_secondary_cpu() ? */
if (!c->cpu_index)
return;
@@ -192,7 +191,6 @@
valid_k7:
;
-#endif
}
static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
@@ -353,6 +351,13 @@
if (node == NUMA_NO_NODE)
node = per_cpu(cpu_llc_id, cpu);
+ /*
+ * If core numbers are inconsistent, it's likely a multi-fabric platform,
+ * so invoke platform-specific handler
+ */
+ if (c->phys_proc_id != node)
+ x86_cpuinit.fixup_cpu_id(c, node);
+
if (!node_online(node)) {
/*
* Two possibilities here:
@@ -442,8 +447,6 @@
static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
{
- u32 dummy;
-
early_init_amd_mc(c);
/*
@@ -473,12 +476,12 @@
set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
}
#endif
-
- rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
}
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
{
+ u32 dummy;
+
#ifdef CONFIG_SMP
unsigned long long value;
@@ -657,6 +660,8 @@
checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask);
}
}
+
+ rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
}
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index e58d978..159103c 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -278,7 +278,7 @@
}
#ifdef CONFIG_X86_32
/* Cyrix III family needs CX8 & PGE explicitly enabled. */
- if (c->x86_model >= 6 && c->x86_model <= 9) {
+ if (c->x86_model >= 6 && c->x86_model <= 13) {
rdmsr(MSR_VIA_FCR, lo, hi);
lo |= (1<<1 | 1<<7);
wrmsr(MSR_VIA_FCR, lo, hi);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index aa003b1..850f296 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -676,9 +676,7 @@
if (this_cpu->c_early_init)
this_cpu->c_early_init(c);
-#ifdef CONFIG_SMP
c->cpu_index = 0;
-#endif
filter_cpuid_features(c, false);
setup_smep(c);
@@ -764,10 +762,7 @@
c->apicid = c->initial_apicid;
# endif
#endif
-
-#ifdef CONFIG_X86_HT
c->phys_proc_id = c->initial_apicid;
-#endif
}
setup_smep(c);
@@ -1141,6 +1136,15 @@
#endif /* ! CONFIG_KGDB */
/*
+ * Prints an error where the NUMA and configured core-number mismatch and the
+ * platform didn't override this to fix it up
+ */
+void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node)
+{
+ pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id);
+}
+
+/*
* cpu_init() initializes state that is per-CPU. Some data is already
* initialized (naturally) in the bootstrap process, such as the GDT
* and IDT. We reload them nevertheless, this function acts as a
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 1b22dcc..8bacc78 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -1,5 +1,4 @@
#ifndef ARCH_X86_CPU_H
-
#define ARCH_X86_CPU_H
struct cpu_model_info {
@@ -35,6 +34,4 @@
extern void get_cpu_cap(struct cpuinfo_x86 *c);
extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c);
-extern void get_cpu_cap(struct cpuinfo_x86 *c);
-
-#endif
+#endif /* ARCH_X86_CPU_H */
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 5231312..3e6ff6c 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -181,7 +181,6 @@
static void __cpuinit intel_smp_check(struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_SMP
/* calling is from identify_secondary_cpu() ? */
if (!c->cpu_index)
return;
@@ -198,7 +197,6 @@
WARN_ONCE(1, "WARNING: SMP operation may be unreliable"
"with B stepping processors.\n");
}
-#endif
}
static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index a3b0811..6b45e5e 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -844,8 +844,7 @@
#include <linux/kobject.h>
#include <linux/sysfs.h>
-
-extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */
+#include <linux/cpu.h>
/* pointer to kobject for cpuX/cache */
static DEFINE_PER_CPU(struct kobject *, ici_cache_kobject);
@@ -1073,9 +1072,9 @@
static DECLARE_BITMAP(cache_dev_map, NR_CPUS);
/* Add/Remove cache interface for CPU device */
-static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_add_dev(struct device *dev)
{
- unsigned int cpu = sys_dev->id;
+ unsigned int cpu = dev->id;
unsigned long i, j;
struct _index_kobject *this_object;
struct _cpuid4_info *this_leaf;
@@ -1087,7 +1086,7 @@
retval = kobject_init_and_add(per_cpu(ici_cache_kobject, cpu),
&ktype_percpu_entry,
- &sys_dev->kobj, "%s", "cache");
+ &dev->kobj, "%s", "cache");
if (retval < 0) {
cpuid4_cache_sysfs_exit(cpu);
return retval;
@@ -1124,9 +1123,9 @@
return 0;
}
-static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
+static void __cpuinit cache_remove_dev(struct device *dev)
{
- unsigned int cpu = sys_dev->id;
+ unsigned int cpu = dev->id;
unsigned long i;
if (per_cpu(ici_cpuid4_info, cpu) == NULL)
@@ -1145,17 +1144,17 @@
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
- struct sys_device *sys_dev;
+ struct device *dev;
- sys_dev = get_cpu_sysdev(cpu);
+ dev = get_cpu_device(cpu);
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- cache_add_dev(sys_dev);
+ cache_add_dev(dev);
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- cache_remove_dev(sys_dev);
+ cache_remove_dev(dev);
break;
}
return NOTIFY_OK;
@@ -1174,9 +1173,9 @@
for_each_online_cpu(i) {
int err;
- struct sys_device *sys_dev = get_cpu_sysdev(i);
+ struct device *dev = get_cpu_device(i);
- err = cache_add_dev(sys_dev);
+ err = cache_add_dev(dev);
if (err)
return err;
}
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 319882e..fc4beb3 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/fs.h>
+#include <linux/preempt.h>
#include <linux/smp.h>
#include <linux/notifier.h>
#include <linux/kdebug.h>
@@ -92,6 +93,18 @@
return NMI_HANDLED;
}
+static void mce_irq_ipi(void *info)
+{
+ int cpu = smp_processor_id();
+ struct mce *m = &__get_cpu_var(injectm);
+
+ if (cpumask_test_cpu(cpu, mce_inject_cpumask) &&
+ m->inject_flags & MCJ_EXCEPTION) {
+ cpumask_clear_cpu(cpu, mce_inject_cpumask);
+ raise_exception(m, NULL);
+ }
+}
+
/* Inject mce on current CPU */
static int raise_local(void)
{
@@ -139,9 +152,10 @@
return;
#ifdef CONFIG_X86_LOCAL_APIC
- if (m->inject_flags & MCJ_NMI_BROADCAST) {
+ if (m->inject_flags & (MCJ_IRQ_BRAODCAST | MCJ_NMI_BROADCAST)) {
unsigned long start;
int cpu;
+
get_online_cpus();
cpumask_copy(mce_inject_cpumask, cpu_online_mask);
cpumask_clear_cpu(get_cpu(), mce_inject_cpumask);
@@ -151,13 +165,25 @@
MCJ_CTX(mcpu->inject_flags) != MCJ_CTX_RANDOM)
cpumask_clear_cpu(cpu, mce_inject_cpumask);
}
- if (!cpumask_empty(mce_inject_cpumask))
- apic->send_IPI_mask(mce_inject_cpumask, NMI_VECTOR);
+ if (!cpumask_empty(mce_inject_cpumask)) {
+ if (m->inject_flags & MCJ_IRQ_BRAODCAST) {
+ /*
+ * don't wait because mce_irq_ipi is necessary
+ * to be sync with following raise_local
+ */
+ preempt_disable();
+ smp_call_function_many(mce_inject_cpumask,
+ mce_irq_ipi, NULL, 0);
+ preempt_enable();
+ } else if (m->inject_flags & MCJ_NMI_BROADCAST)
+ apic->send_IPI_mask(mce_inject_cpumask,
+ NMI_VECTOR);
+ }
start = jiffies;
while (!cpumask_empty(mce_inject_cpumask)) {
if (!time_before(jiffies, start + 2*HZ)) {
printk(KERN_ERR
- "Timeout waiting for mce inject NMI %lx\n",
+ "Timeout waiting for mce inject %lx\n",
*cpumask_bits(mce_inject_cpumask));
break;
}
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index fefcc69..ed44c8a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -1,4 +1,4 @@
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <asm/mce.h>
enum severity_level {
@@ -17,7 +17,7 @@
struct mce_bank {
u64 ctl; /* subevents to enable */
unsigned char init; /* initialise bank? */
- struct sysdev_attribute attr; /* sysdev attribute */
+ struct device_attribute attr; /* device attribute */
char attrname[ATTR_LEN]; /* attribute name */
};
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 2af127d..f22a9f7 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -19,7 +19,7 @@
#include <linux/kernel.h>
#include <linux/percpu.h>
#include <linux/string.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/delay.h>
#include <linux/ctype.h>
@@ -95,13 +95,6 @@
static DEFINE_PER_CPU(struct mce, mces_seen);
static int cpu_missing;
-/*
- * CPU/chipset specific EDAC code can register a notifier call here to print
- * MCE errors in a human-readable form.
- */
-ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
-EXPORT_SYMBOL_GPL(x86_mce_decoder_chain);
-
/* MCA banks polled by the period polling timer for corrected events */
DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
@@ -109,6 +102,12 @@
static DEFINE_PER_CPU(struct work_struct, mce_work);
+/*
+ * CPU/chipset specific EDAC code can register a notifier call here to print
+ * MCE errors in a human-readable form.
+ */
+ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
+
/* Do initial initialization of a struct mce */
void mce_setup(struct mce *m)
{
@@ -119,9 +118,7 @@
m->time = get_seconds();
m->cpuvendor = boot_cpu_data.x86_vendor;
m->cpuid = cpuid_eax(1);
-#ifdef CONFIG_SMP
m->socketid = cpu_data(m->extcpu).phys_proc_id;
-#endif
m->apicid = cpu_data(m->extcpu).initial_apicid;
rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap);
}
@@ -190,6 +187,57 @@
set_bit(0, &mce_need_notify);
}
+static void drain_mcelog_buffer(void)
+{
+ unsigned int next, i, prev = 0;
+
+ next = rcu_dereference_check_mce(mcelog.next);
+
+ do {
+ struct mce *m;
+
+ /* drain what was logged during boot */
+ for (i = prev; i < next; i++) {
+ unsigned long start = jiffies;
+ unsigned retries = 1;
+
+ m = &mcelog.entry[i];
+
+ while (!m->finished) {
+ if (time_after_eq(jiffies, start + 2*retries))
+ retries++;
+
+ cpu_relax();
+
+ if (!m->finished && retries >= 4) {
+ pr_err("MCE: skipping error being logged currently!\n");
+ break;
+ }
+ }
+ smp_rmb();
+ atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
+ }
+
+ memset(mcelog.entry + prev, 0, (next - prev) * sizeof(*m));
+ prev = next;
+ next = cmpxchg(&mcelog.next, prev, 0);
+ } while (next != prev);
+}
+
+
+void mce_register_decode_chain(struct notifier_block *nb)
+{
+ atomic_notifier_chain_register(&x86_mce_decoder_chain, nb);
+ drain_mcelog_buffer();
+}
+EXPORT_SYMBOL_GPL(mce_register_decode_chain);
+
+void mce_unregister_decode_chain(struct notifier_block *nb)
+{
+ atomic_notifier_chain_unregister(&x86_mce_decoder_chain, nb);
+}
+EXPORT_SYMBOL_GPL(mce_unregister_decode_chain);
+
static void print_mce(struct mce *m)
{
int ret = 0;
@@ -1770,7 +1818,7 @@
};
/*
- * mce_sysdev: Sysfs support
+ * mce_device: Sysfs support
*/
static void mce_cpu_restart(void *data)
@@ -1806,27 +1854,28 @@
__mcheck_cpu_init_timer();
}
-static struct sysdev_class mce_sysdev_class = {
+static struct bus_type mce_subsys = {
.name = "machinecheck",
+ .dev_name = "machinecheck",
};
-DEFINE_PER_CPU(struct sys_device, mce_sysdev);
+DEFINE_PER_CPU(struct device, mce_device);
__cpuinitdata
void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
-static inline struct mce_bank *attr_to_bank(struct sysdev_attribute *attr)
+static inline struct mce_bank *attr_to_bank(struct device_attribute *attr)
{
return container_of(attr, struct mce_bank, attr);
}
-static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
+static ssize_t show_bank(struct device *s, struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%llx\n", attr_to_bank(attr)->ctl);
}
-static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
+static ssize_t set_bank(struct device *s, struct device_attribute *attr,
const char *buf, size_t size)
{
u64 new;
@@ -1841,14 +1890,14 @@
}
static ssize_t
-show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf)
+show_trigger(struct device *s, struct device_attribute *attr, char *buf)
{
strcpy(buf, mce_helper);
strcat(buf, "\n");
return strlen(mce_helper) + 1;
}
-static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+static ssize_t set_trigger(struct device *s, struct device_attribute *attr,
const char *buf, size_t siz)
{
char *p;
@@ -1863,8 +1912,8 @@
return strlen(mce_helper) + !!p;
}
-static ssize_t set_ignore_ce(struct sys_device *s,
- struct sysdev_attribute *attr,
+static ssize_t set_ignore_ce(struct device *s,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
u64 new;
@@ -1887,8 +1936,8 @@
return size;
}
-static ssize_t set_cmci_disabled(struct sys_device *s,
- struct sysdev_attribute *attr,
+static ssize_t set_cmci_disabled(struct device *s,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
u64 new;
@@ -1910,108 +1959,107 @@
return size;
}
-static ssize_t store_int_with_restart(struct sys_device *s,
- struct sysdev_attribute *attr,
+static ssize_t store_int_with_restart(struct device *s,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
- ssize_t ret = sysdev_store_int(s, attr, buf, size);
+ ssize_t ret = device_store_int(s, attr, buf, size);
mce_restart();
return ret;
}
-static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
-static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
-static SYSDEV_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce);
+static DEVICE_ATTR(trigger, 0644, show_trigger, set_trigger);
+static DEVICE_INT_ATTR(tolerant, 0644, tolerant);
+static DEVICE_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
+static DEVICE_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce);
-static struct sysdev_ext_attribute attr_check_interval = {
- _SYSDEV_ATTR(check_interval, 0644, sysdev_show_int,
- store_int_with_restart),
+static struct dev_ext_attribute dev_attr_check_interval = {
+ __ATTR(check_interval, 0644, device_show_int, store_int_with_restart),
&check_interval
};
-static struct sysdev_ext_attribute attr_ignore_ce = {
- _SYSDEV_ATTR(ignore_ce, 0644, sysdev_show_int, set_ignore_ce),
+static struct dev_ext_attribute dev_attr_ignore_ce = {
+ __ATTR(ignore_ce, 0644, device_show_int, set_ignore_ce),
&mce_ignore_ce
};
-static struct sysdev_ext_attribute attr_cmci_disabled = {
- _SYSDEV_ATTR(cmci_disabled, 0644, sysdev_show_int, set_cmci_disabled),
+static struct dev_ext_attribute dev_attr_cmci_disabled = {
+ __ATTR(cmci_disabled, 0644, device_show_int, set_cmci_disabled),
&mce_cmci_disabled
};
-static struct sysdev_attribute *mce_sysdev_attrs[] = {
- &attr_tolerant.attr,
- &attr_check_interval.attr,
- &attr_trigger,
- &attr_monarch_timeout.attr,
- &attr_dont_log_ce.attr,
- &attr_ignore_ce.attr,
- &attr_cmci_disabled.attr,
+static struct device_attribute *mce_device_attrs[] = {
+ &dev_attr_tolerant.attr,
+ &dev_attr_check_interval.attr,
+ &dev_attr_trigger,
+ &dev_attr_monarch_timeout.attr,
+ &dev_attr_dont_log_ce.attr,
+ &dev_attr_ignore_ce.attr,
+ &dev_attr_cmci_disabled.attr,
NULL
};
-static cpumask_var_t mce_sysdev_initialized;
+static cpumask_var_t mce_device_initialized;
-/* Per cpu sysdev init. All of the cpus still share the same ctrl bank: */
-static __cpuinit int mce_sysdev_create(unsigned int cpu)
+/* Per cpu device init. All of the cpus still share the same ctrl bank: */
+static __cpuinit int mce_device_create(unsigned int cpu)
{
- struct sys_device *sysdev = &per_cpu(mce_sysdev, cpu);
+ struct device *dev = &per_cpu(mce_device, cpu);
int err;
int i, j;
if (!mce_available(&boot_cpu_data))
return -EIO;
- memset(&sysdev->kobj, 0, sizeof(struct kobject));
- sysdev->id = cpu;
- sysdev->cls = &mce_sysdev_class;
+ memset(&dev->kobj, 0, sizeof(struct kobject));
+ dev->id = cpu;
+ dev->bus = &mce_subsys;
- err = sysdev_register(sysdev);
+ err = device_register(dev);
if (err)
return err;
- for (i = 0; mce_sysdev_attrs[i]; i++) {
- err = sysdev_create_file(sysdev, mce_sysdev_attrs[i]);
+ for (i = 0; mce_device_attrs[i]; i++) {
+ err = device_create_file(dev, mce_device_attrs[i]);
if (err)
goto error;
}
for (j = 0; j < banks; j++) {
- err = sysdev_create_file(sysdev, &mce_banks[j].attr);
+ err = device_create_file(dev, &mce_banks[j].attr);
if (err)
goto error2;
}
- cpumask_set_cpu(cpu, mce_sysdev_initialized);
+ cpumask_set_cpu(cpu, mce_device_initialized);
return 0;
error2:
while (--j >= 0)
- sysdev_remove_file(sysdev, &mce_banks[j].attr);
+ device_remove_file(dev, &mce_banks[j].attr);
error:
while (--i >= 0)
- sysdev_remove_file(sysdev, mce_sysdev_attrs[i]);
+ device_remove_file(dev, mce_device_attrs[i]);
- sysdev_unregister(sysdev);
+ device_unregister(dev);
return err;
}
-static __cpuinit void mce_sysdev_remove(unsigned int cpu)
+static __cpuinit void mce_device_remove(unsigned int cpu)
{
- struct sys_device *sysdev = &per_cpu(mce_sysdev, cpu);
+ struct device *dev = &per_cpu(mce_device, cpu);
int i;
- if (!cpumask_test_cpu(cpu, mce_sysdev_initialized))
+ if (!cpumask_test_cpu(cpu, mce_device_initialized))
return;
- for (i = 0; mce_sysdev_attrs[i]; i++)
- sysdev_remove_file(sysdev, mce_sysdev_attrs[i]);
+ for (i = 0; mce_device_attrs[i]; i++)
+ device_remove_file(dev, mce_device_attrs[i]);
for (i = 0; i < banks; i++)
- sysdev_remove_file(sysdev, &mce_banks[i].attr);
+ device_remove_file(dev, &mce_banks[i].attr);
- sysdev_unregister(sysdev);
- cpumask_clear_cpu(cpu, mce_sysdev_initialized);
+ device_unregister(dev);
+ cpumask_clear_cpu(cpu, mce_device_initialized);
}
/* Make sure there are no machine checks on offlined CPUs. */
@@ -2061,7 +2109,7 @@
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- mce_sysdev_create(cpu);
+ mce_device_create(cpu);
if (threshold_cpu_callback)
threshold_cpu_callback(action, cpu);
break;
@@ -2069,7 +2117,7 @@
case CPU_DEAD_FROZEN:
if (threshold_cpu_callback)
threshold_cpu_callback(action, cpu);
- mce_sysdev_remove(cpu);
+ mce_device_remove(cpu);
break;
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
@@ -2103,7 +2151,7 @@
for (i = 0; i < banks; i++) {
struct mce_bank *b = &mce_banks[i];
- struct sysdev_attribute *a = &b->attr;
+ struct device_attribute *a = &b->attr;
sysfs_attr_init(&a->attr);
a->attr.name = b->attrname;
@@ -2123,16 +2171,16 @@
if (!mce_available(&boot_cpu_data))
return -EIO;
- zalloc_cpumask_var(&mce_sysdev_initialized, GFP_KERNEL);
+ zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
mce_init_banks();
- err = sysdev_class_register(&mce_sysdev_class);
+ err = subsys_system_register(&mce_subsys, NULL);
if (err)
return err;
for_each_online_cpu(i) {
- err = mce_sysdev_create(i);
+ err = mce_device_create(i);
if (err)
return err;
}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index f547421..ba0b94a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -17,7 +17,6 @@
#include <linux/notifier.h>
#include <linux/kobject.h>
#include <linux/percpu.h>
-#include <linux/sysdev.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/sysfs.h>
@@ -64,11 +63,9 @@
};
static DEFINE_PER_CPU(struct threshold_bank * [NR_BANKS], threshold_banks);
-#ifdef CONFIG_SMP
static unsigned char shared_bank[NR_BANKS] = {
0, 0, 0, 0, 1
};
-#endif
static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */
@@ -202,10 +199,9 @@
if (!block)
per_cpu(bank_map, cpu) |= (1 << bank);
-#ifdef CONFIG_SMP
if (shared_bank[bank] && c->cpu_core_id)
break;
-#endif
+
offset = setup_APIC_mce(offset,
(high & MASK_LVTOFF_HI) >> 20);
@@ -531,7 +527,6 @@
sprintf(name, "threshold_bank%i", bank);
-#ifdef CONFIG_SMP
if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */
i = cpumask_first(cpu_llc_shared_mask(cpu));
@@ -548,7 +543,7 @@
if (!b)
goto out;
- err = sysfs_create_link(&per_cpu(mce_sysdev, cpu).kobj,
+ err = sysfs_create_link(&per_cpu(mce_device, cpu).kobj,
b->kobj, name);
if (err)
goto out;
@@ -558,7 +553,6 @@
goto out;
}
-#endif
b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
if (!b) {
@@ -571,7 +565,7 @@
goto out;
}
- b->kobj = kobject_create_and_add(name, &per_cpu(mce_sysdev, cpu).kobj);
+ b->kobj = kobject_create_and_add(name, &per_cpu(mce_device, cpu).kobj);
if (!b->kobj)
goto out_free;
@@ -591,7 +585,7 @@
if (i == cpu)
continue;
- err = sysfs_create_link(&per_cpu(mce_sysdev, i).kobj,
+ err = sysfs_create_link(&per_cpu(mce_device, i).kobj,
b->kobj, name);
if (err)
goto out;
@@ -669,7 +663,7 @@
#ifdef CONFIG_SMP
/* sibling symlink */
if (shared_bank[bank] && b->blocks->cpu != cpu) {
- sysfs_remove_link(&per_cpu(mce_sysdev, cpu).kobj, name);
+ sysfs_remove_link(&per_cpu(mce_device, cpu).kobj, name);
per_cpu(threshold_banks, cpu)[bank] = NULL;
return;
@@ -681,7 +675,7 @@
if (i == cpu)
continue;
- sysfs_remove_link(&per_cpu(mce_sysdev, i).kobj, name);
+ sysfs_remove_link(&per_cpu(mce_device, i).kobj, name);
per_cpu(threshold_banks, i)[bank] = NULL;
}
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 787e06c..67bb17a 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/percpu.h>
#include <linux/export.h>
-#include <linux/sysdev.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/smp.h>
@@ -69,16 +68,16 @@
static u32 lvtthmr_init __read_mostly;
#ifdef CONFIG_SYSFS
-#define define_therm_throt_sysdev_one_ro(_name) \
- static SYSDEV_ATTR(_name, 0444, \
- therm_throt_sysdev_show_##_name, \
+#define define_therm_throt_device_one_ro(_name) \
+ static DEVICE_ATTR(_name, 0444, \
+ therm_throt_device_show_##_name, \
NULL) \
-#define define_therm_throt_sysdev_show_func(event, name) \
+#define define_therm_throt_device_show_func(event, name) \
\
-static ssize_t therm_throt_sysdev_show_##event##_##name( \
- struct sys_device *dev, \
- struct sysdev_attribute *attr, \
+static ssize_t therm_throt_device_show_##event##_##name( \
+ struct device *dev, \
+ struct device_attribute *attr, \
char *buf) \
{ \
unsigned int cpu = dev->id; \
@@ -95,20 +94,20 @@
return ret; \
}
-define_therm_throt_sysdev_show_func(core_throttle, count);
-define_therm_throt_sysdev_one_ro(core_throttle_count);
+define_therm_throt_device_show_func(core_throttle, count);
+define_therm_throt_device_one_ro(core_throttle_count);
-define_therm_throt_sysdev_show_func(core_power_limit, count);
-define_therm_throt_sysdev_one_ro(core_power_limit_count);
+define_therm_throt_device_show_func(core_power_limit, count);
+define_therm_throt_device_one_ro(core_power_limit_count);
-define_therm_throt_sysdev_show_func(package_throttle, count);
-define_therm_throt_sysdev_one_ro(package_throttle_count);
+define_therm_throt_device_show_func(package_throttle, count);
+define_therm_throt_device_one_ro(package_throttle_count);
-define_therm_throt_sysdev_show_func(package_power_limit, count);
-define_therm_throt_sysdev_one_ro(package_power_limit_count);
+define_therm_throt_device_show_func(package_power_limit, count);
+define_therm_throt_device_one_ro(package_power_limit_count);
static struct attribute *thermal_throttle_attrs[] = {
- &attr_core_throttle_count.attr,
+ &dev_attr_core_throttle_count.attr,
NULL
};
@@ -223,36 +222,36 @@
#ifdef CONFIG_SYSFS
/* Add/Remove thermal_throttle interface for CPU device: */
-static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev,
+static __cpuinit int thermal_throttle_add_dev(struct device *dev,
unsigned int cpu)
{
int err;
struct cpuinfo_x86 *c = &cpu_data(cpu);
- err = sysfs_create_group(&sys_dev->kobj, &thermal_attr_group);
+ err = sysfs_create_group(&dev->kobj, &thermal_attr_group);
if (err)
return err;
if (cpu_has(c, X86_FEATURE_PLN))
- err = sysfs_add_file_to_group(&sys_dev->kobj,
- &attr_core_power_limit_count.attr,
+ err = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_core_power_limit_count.attr,
thermal_attr_group.name);
if (cpu_has(c, X86_FEATURE_PTS)) {
- err = sysfs_add_file_to_group(&sys_dev->kobj,
- &attr_package_throttle_count.attr,
+ err = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_package_throttle_count.attr,
thermal_attr_group.name);
if (cpu_has(c, X86_FEATURE_PLN))
- err = sysfs_add_file_to_group(&sys_dev->kobj,
- &attr_package_power_limit_count.attr,
+ err = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_package_power_limit_count.attr,
thermal_attr_group.name);
}
return err;
}
-static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
+static __cpuinit void thermal_throttle_remove_dev(struct device *dev)
{
- sysfs_remove_group(&sys_dev->kobj, &thermal_attr_group);
+ sysfs_remove_group(&dev->kobj, &thermal_attr_group);
}
/* Mutex protecting device creation against CPU hotplug: */
@@ -265,16 +264,16 @@
void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
- struct sys_device *sys_dev;
+ struct device *dev;
int err = 0;
- sys_dev = get_cpu_sysdev(cpu);
+ dev = get_cpu_device(cpu);
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
mutex_lock(&therm_cpu_lock);
- err = thermal_throttle_add_dev(sys_dev, cpu);
+ err = thermal_throttle_add_dev(dev, cpu);
mutex_unlock(&therm_cpu_lock);
WARN_ON(err);
break;
@@ -283,7 +282,7 @@
case CPU_DEAD:
case CPU_DEAD_FROZEN:
mutex_lock(&therm_cpu_lock);
- thermal_throttle_remove_dev(sys_dev);
+ thermal_throttle_remove_dev(dev);
mutex_unlock(&therm_cpu_lock);
break;
}
@@ -310,7 +309,7 @@
#endif
/* connect live CPUs to sysfs */
for_each_online_cpu(cpu) {
- err = thermal_throttle_add_dev(get_cpu_sysdev(cpu), cpu);
+ err = thermal_throttle_add_dev(get_cpu_device(cpu), cpu);
WARN_ON(err);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -323,17 +322,6 @@
#endif /* CONFIG_SYSFS */
-/*
- * Set up the most two significant bit to notify mce log that this thermal
- * event type.
- * This is a temp solution. May be changed in the future with mce log
- * infrasture.
- */
-#define CORE_THROTTLED (0)
-#define CORE_POWER_LIMIT ((__u64)1 << 62)
-#define PACKAGE_THROTTLED ((__u64)2 << 62)
-#define PACKAGE_POWER_LIMIT ((__u64)3 << 62)
-
static void notify_thresholds(__u64 msr_val)
{
/* check whether the interrupt handler is defined;
@@ -363,27 +351,23 @@
if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
THERMAL_THROTTLING_EVENT,
CORE_LEVEL) != 0)
- mce_log_therm_throt_event(CORE_THROTTLED | msr_val);
+ mce_log_therm_throt_event(msr_val);
if (this_cpu_has(X86_FEATURE_PLN))
- if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
+ therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
POWER_LIMIT_EVENT,
- CORE_LEVEL) != 0)
- mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val);
+ CORE_LEVEL);
if (this_cpu_has(X86_FEATURE_PTS)) {
rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
- if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
+ therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
THERMAL_THROTTLING_EVENT,
- PACKAGE_LEVEL) != 0)
- mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val);
+ PACKAGE_LEVEL);
if (this_cpu_has(X86_FEATURE_PLN))
- if (therm_throt_process(msr_val &
+ therm_throt_process(msr_val &
PACKAGE_THERM_STATUS_POWER_LIMIT,
POWER_LIMIT_EVENT,
- PACKAGE_LEVEL) != 0)
- mce_log_therm_throt_event(PACKAGE_POWER_LIMIT
- | msr_val);
+ PACKAGE_LEVEL);
}
}
@@ -397,8 +381,8 @@
asmlinkage void smp_thermal_interrupt(struct pt_regs *regs)
{
- exit_idle();
irq_enter();
+ exit_idle();
inc_irq_stat(irq_thermal_count);
smp_thermal_vector();
irq_exit();
diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c b/arch/x86/kernel/cpu/mcheck/threshold.c
index d746df2..aa578ca 100644
--- a/arch/x86/kernel/cpu/mcheck/threshold.c
+++ b/arch/x86/kernel/cpu/mcheck/threshold.c
@@ -19,8 +19,8 @@
asmlinkage void smp_threshold_interrupt(void)
{
- exit_idle();
irq_enter();
+ exit_idle();
inc_irq_stat(irq_threshold_count);
mce_threshold_vector();
irq_exit();
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index a71efcdb..97b2635 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -547,6 +547,7 @@
if (tmp != mask_lo) {
printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n");
+ add_taint(TAINT_FIRMWARE_WORKAROUND);
mask_lo = tmp;
}
}
@@ -693,6 +694,7 @@
/* Disable MTRRs, and set the default type to uncached */
mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
+ wbinvd();
}
static void post_set(void) __releases(set_atomicity_lock)
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 6408910..5adce10 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -312,12 +312,8 @@
return -EOPNOTSUPP;
}
- /*
- * Do not allow config1 (extended registers) to propagate,
- * there's no sane user-space generalization yet:
- */
if (attr->type == PERF_TYPE_RAW)
- return 0;
+ return x86_pmu_extra_regs(event->attr.config, event);
if (attr->type == PERF_TYPE_HW_CACHE)
return set_ext_hw_attr(hwc, event);
@@ -488,18 +484,195 @@
return event->pmu == &pmu;
}
+/*
+ * Event scheduler state:
+ *
+ * Assign events iterating over all events and counters, beginning
+ * with events with least weights first. Keep the current iterator
+ * state in struct sched_state.
+ */
+struct sched_state {
+ int weight;
+ int event; /* event index */
+ int counter; /* counter index */
+ int unassigned; /* number of events to be assigned left */
+ unsigned long used[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+};
+
+/* Total max is X86_PMC_IDX_MAX, but we are O(n!) limited */
+#define SCHED_STATES_MAX 2
+
+struct perf_sched {
+ int max_weight;
+ int max_events;
+ struct event_constraint **constraints;
+ struct sched_state state;
+ int saved_states;
+ struct sched_state saved[SCHED_STATES_MAX];
+};
+
+/*
+ * Initialize interator that runs through all events and counters.
+ */
+static void perf_sched_init(struct perf_sched *sched, struct event_constraint **c,
+ int num, int wmin, int wmax)
+{
+ int idx;
+
+ memset(sched, 0, sizeof(*sched));
+ sched->max_events = num;
+ sched->max_weight = wmax;
+ sched->constraints = c;
+
+ for (idx = 0; idx < num; idx++) {
+ if (c[idx]->weight == wmin)
+ break;
+ }
+
+ sched->state.event = idx; /* start with min weight */
+ sched->state.weight = wmin;
+ sched->state.unassigned = num;
+}
+
+static void perf_sched_save_state(struct perf_sched *sched)
+{
+ if (WARN_ON_ONCE(sched->saved_states >= SCHED_STATES_MAX))
+ return;
+
+ sched->saved[sched->saved_states] = sched->state;
+ sched->saved_states++;
+}
+
+static bool perf_sched_restore_state(struct perf_sched *sched)
+{
+ if (!sched->saved_states)
+ return false;
+
+ sched->saved_states--;
+ sched->state = sched->saved[sched->saved_states];
+
+ /* continue with next counter: */
+ clear_bit(sched->state.counter++, sched->state.used);
+
+ return true;
+}
+
+/*
+ * Select a counter for the current event to schedule. Return true on
+ * success.
+ */
+static bool __perf_sched_find_counter(struct perf_sched *sched)
+{
+ struct event_constraint *c;
+ int idx;
+
+ if (!sched->state.unassigned)
+ return false;
+
+ if (sched->state.event >= sched->max_events)
+ return false;
+
+ c = sched->constraints[sched->state.event];
+
+ /* Prefer fixed purpose counters */
+ if (x86_pmu.num_counters_fixed) {
+ idx = X86_PMC_IDX_FIXED;
+ for_each_set_bit_cont(idx, c->idxmsk, X86_PMC_IDX_MAX) {
+ if (!__test_and_set_bit(idx, sched->state.used))
+ goto done;
+ }
+ }
+ /* Grab the first unused counter starting with idx */
+ idx = sched->state.counter;
+ for_each_set_bit_cont(idx, c->idxmsk, X86_PMC_IDX_FIXED) {
+ if (!__test_and_set_bit(idx, sched->state.used))
+ goto done;
+ }
+
+ return false;
+
+done:
+ sched->state.counter = idx;
+
+ if (c->overlap)
+ perf_sched_save_state(sched);
+
+ return true;
+}
+
+static bool perf_sched_find_counter(struct perf_sched *sched)
+{
+ while (!__perf_sched_find_counter(sched)) {
+ if (!perf_sched_restore_state(sched))
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * Go through all unassigned events and find the next one to schedule.
+ * Take events with the least weight first. Return true on success.
+ */
+static bool perf_sched_next_event(struct perf_sched *sched)
+{
+ struct event_constraint *c;
+
+ if (!sched->state.unassigned || !--sched->state.unassigned)
+ return false;
+
+ do {
+ /* next event */
+ sched->state.event++;
+ if (sched->state.event >= sched->max_events) {
+ /* next weight */
+ sched->state.event = 0;
+ sched->state.weight++;
+ if (sched->state.weight > sched->max_weight)
+ return false;
+ }
+ c = sched->constraints[sched->state.event];
+ } while (c->weight != sched->state.weight);
+
+ sched->state.counter = 0; /* start with first counter */
+
+ return true;
+}
+
+/*
+ * Assign a counter for each event.
+ */
+static int perf_assign_events(struct event_constraint **constraints, int n,
+ int wmin, int wmax, int *assign)
+{
+ struct perf_sched sched;
+
+ perf_sched_init(&sched, constraints, n, wmin, wmax);
+
+ do {
+ if (!perf_sched_find_counter(&sched))
+ break; /* failed */
+ if (assign)
+ assign[sched.state.event] = sched.state.counter;
+ } while (perf_sched_next_event(&sched));
+
+ return sched.state.unassigned;
+}
+
int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
{
struct event_constraint *c, *constraints[X86_PMC_IDX_MAX];
unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
- int i, j, w, wmax, num = 0;
+ int i, wmin, wmax, num = 0;
struct hw_perf_event *hwc;
bitmap_zero(used_mask, X86_PMC_IDX_MAX);
- for (i = 0; i < n; i++) {
+ for (i = 0, wmin = X86_PMC_IDX_MAX, wmax = 0; i < n; i++) {
c = x86_pmu.get_event_constraints(cpuc, cpuc->event_list[i]);
constraints[i] = c;
+ wmin = min(wmin, c->weight);
+ wmax = max(wmax, c->weight);
}
/*
@@ -525,59 +698,11 @@
if (assign)
assign[i] = hwc->idx;
}
- if (i == n)
- goto done;
- /*
- * begin slow path
- */
+ /* slow path */
+ if (i != n)
+ num = perf_assign_events(constraints, n, wmin, wmax, assign);
- bitmap_zero(used_mask, X86_PMC_IDX_MAX);
-
- /*
- * weight = number of possible counters
- *
- * 1 = most constrained, only works on one counter
- * wmax = least constrained, works on any counter
- *
- * assign events to counters starting with most
- * constrained events.
- */
- wmax = x86_pmu.num_counters;
-
- /*
- * when fixed event counters are present,
- * wmax is incremented by 1 to account
- * for one more choice
- */
- if (x86_pmu.num_counters_fixed)
- wmax++;
-
- for (w = 1, num = n; num && w <= wmax; w++) {
- /* for each event */
- for (i = 0; num && i < n; i++) {
- c = constraints[i];
- hwc = &cpuc->event_list[i]->hw;
-
- if (c->weight != w)
- continue;
-
- for_each_set_bit(j, c->idxmsk, X86_PMC_IDX_MAX) {
- if (!test_bit(j, used_mask))
- break;
- }
-
- if (j == X86_PMC_IDX_MAX)
- break;
-
- __set_bit(j, used_mask);
-
- if (assign)
- assign[i] = j;
- num--;
- }
- }
-done:
/*
* scheduling failed or is just a simulation,
* free resources if necessary
@@ -588,7 +713,7 @@
x86_pmu.put_event_constraints(cpuc, cpuc->event_list[i]);
}
}
- return num ? -ENOSPC : 0;
+ return num ? -EINVAL : 0;
}
/*
@@ -607,7 +732,7 @@
if (is_x86_event(leader)) {
if (n >= max_count)
- return -ENOSPC;
+ return -EINVAL;
cpuc->event_list[n] = leader;
n++;
}
@@ -620,7 +745,7 @@
continue;
if (n >= max_count)
- return -ENOSPC;
+ return -EINVAL;
cpuc->event_list[n] = event;
n++;
@@ -1123,6 +1248,7 @@
static int __init init_hw_perf_events(void)
{
+ struct x86_pmu_quirk *quirk;
struct event_constraint *c;
int err;
@@ -1151,8 +1277,8 @@
pr_cont("%s PMU driver.\n", x86_pmu.name);
- if (x86_pmu.quirks)
- x86_pmu.quirks();
+ for (quirk = x86_pmu.quirks; quirk; quirk = quirk->next)
+ quirk->func();
if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
WARN(1, KERN_ERR "hw perf events %d > max(%d), clipping!",
@@ -1175,12 +1301,18 @@
unconstrained = (struct event_constraint)
__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1,
- 0, x86_pmu.num_counters);
+ 0, x86_pmu.num_counters, 0);
if (x86_pmu.event_constraints) {
+ /*
+ * event on fixed counter2 (REF_CYCLES) only works on this
+ * counter, so do not extend mask to generic counters
+ */
for_each_event_constraint(c, x86_pmu.event_constraints) {
- if (c->cmask != X86_RAW_EVENT_MASK)
+ if (c->cmask != X86_RAW_EVENT_MASK
+ || c->idxmsk64 == X86_PMC_MSK_FIXED_REF_CYCLES) {
continue;
+ }
c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
c->weight += x86_pmu.num_counters;
@@ -1316,7 +1448,7 @@
c = x86_pmu.get_event_constraints(fake_cpuc, event);
if (!c || !c->weight)
- ret = -ENOSPC;
+ ret = -EINVAL;
if (x86_pmu.put_event_constraints)
x86_pmu.put_event_constraints(fake_cpuc, event);
@@ -1341,7 +1473,7 @@
{
struct perf_event *leader = event->group_leader;
struct cpu_hw_events *fake_cpuc;
- int ret = -ENOSPC, n;
+ int ret = -EINVAL, n;
fake_cpuc = allocate_fake_cpuc();
if (IS_ERR(fake_cpuc))
@@ -1570,3 +1702,15 @@
return misc;
}
+
+void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
+{
+ cap->version = x86_pmu.version;
+ cap->num_counters_gp = x86_pmu.num_counters;
+ cap->num_counters_fixed = x86_pmu.num_counters_fixed;
+ cap->bit_width_gp = x86_pmu.cntval_bits;
+ cap->bit_width_fixed = x86_pmu.cntval_bits;
+ cap->events_mask = (unsigned int)x86_pmu.events_maskl;
+ cap->events_mask_len = x86_pmu.events_mask_len;
+}
+EXPORT_SYMBOL_GPL(perf_get_x86_pmu_capability);
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index b9698d4..8944062 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -45,6 +45,7 @@
u64 code;
u64 cmask;
int weight;
+ int overlap;
};
struct amd_nb {
@@ -151,15 +152,40 @@
void *kfree_on_online;
};
-#define __EVENT_CONSTRAINT(c, n, m, w) {\
+#define __EVENT_CONSTRAINT(c, n, m, w, o) {\
{ .idxmsk64 = (n) }, \
.code = (c), \
.cmask = (m), \
.weight = (w), \
+ .overlap = (o), \
}
#define EVENT_CONSTRAINT(c, n, m) \
- __EVENT_CONSTRAINT(c, n, m, HWEIGHT(n))
+ __EVENT_CONSTRAINT(c, n, m, HWEIGHT(n), 0)
+
+/*
+ * The overlap flag marks event constraints with overlapping counter
+ * masks. This is the case if the counter mask of such an event is not
+ * a subset of any other counter mask of a constraint with an equal or
+ * higher weight, e.g.:
+ *
+ * c_overlaps = EVENT_CONSTRAINT_OVERLAP(0, 0x09, 0);
+ * c_another1 = EVENT_CONSTRAINT(0, 0x07, 0);
+ * c_another2 = EVENT_CONSTRAINT(0, 0x38, 0);
+ *
+ * The event scheduler may not select the correct counter in the first
+ * cycle because it needs to know which subsequent events will be
+ * scheduled. It may fail to schedule the events then. So we set the
+ * overlap flag for such constraints to give the scheduler a hint which
+ * events to select for counter rescheduling.
+ *
+ * Care must be taken as the rescheduling algorithm is O(n!) which
+ * will increase scheduling cycles for an over-commited system
+ * dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros
+ * and its counter masks must be kept at a minimum.
+ */
+#define EVENT_CONSTRAINT_OVERLAP(c, n, m) \
+ __EVENT_CONSTRAINT(c, n, m, HWEIGHT(n), 1)
/*
* Constraint on the Event code.
@@ -235,6 +261,11 @@
u64 capabilities;
};
+struct x86_pmu_quirk {
+ struct x86_pmu_quirk *next;
+ void (*func)(void);
+};
+
/*
* struct x86_pmu - generic x86 pmu
*/
@@ -259,6 +290,11 @@
int num_counters_fixed;
int cntval_bits;
u64 cntval_mask;
+ union {
+ unsigned long events_maskl;
+ unsigned long events_mask[BITS_TO_LONGS(ARCH_PERFMON_EVENTS_COUNT)];
+ };
+ int events_mask_len;
int apic;
u64 max_period;
struct event_constraint *
@@ -268,7 +304,7 @@
void (*put_event_constraints)(struct cpu_hw_events *cpuc,
struct perf_event *event);
struct event_constraint *event_constraints;
- void (*quirks)(void);
+ struct x86_pmu_quirk *quirks;
int perfctr_second_write;
int (*cpu_prepare)(int cpu);
@@ -309,6 +345,15 @@
struct perf_guest_switch_msr *(*guest_get_msrs)(int *nr);
};
+#define x86_add_quirk(func_) \
+do { \
+ static struct x86_pmu_quirk __quirk __initdata = { \
+ .func = func_, \
+ }; \
+ __quirk.next = x86_pmu.quirks; \
+ x86_pmu.quirks = &__quirk; \
+} while (0)
+
#define ERF_NO_HT_SHARING 1
#define ERF_HAS_RSP_1 2
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index aeefd45..0397b23 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -492,7 +492,7 @@
static struct event_constraint amd_f15_PMC0 = EVENT_CONSTRAINT(0, 0x01, 0);
static struct event_constraint amd_f15_PMC20 = EVENT_CONSTRAINT(0, 0x07, 0);
static struct event_constraint amd_f15_PMC3 = EVENT_CONSTRAINT(0, 0x08, 0);
-static struct event_constraint amd_f15_PMC30 = EVENT_CONSTRAINT(0, 0x09, 0);
+static struct event_constraint amd_f15_PMC30 = EVENT_CONSTRAINT_OVERLAP(0, 0x09, 0);
static struct event_constraint amd_f15_PMC50 = EVENT_CONSTRAINT(0, 0x3F, 0);
static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0);
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index ab6343d..3b8a2d3 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -199,8 +199,7 @@
goto out;
}
- pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset);
- pr_err(FW_BUG "workaround enabled for IBS LVT offset\n");
+ pr_info("IBS: LVT offset %d assigned\n", offset);
return 0;
out:
@@ -265,19 +264,23 @@
static __init int amd_ibs_init(void)
{
u32 caps;
- int ret;
+ int ret = -EINVAL;
caps = __get_ibs_caps();
if (!caps)
return -ENODEV; /* ibs not supported by the cpu */
- if (!ibs_eilvt_valid()) {
- ret = force_ibs_eilvt_setup();
- if (ret) {
- pr_err("Failed to setup IBS, %d\n", ret);
- return ret;
- }
- }
+ /*
+ * Force LVT offset assignment for family 10h: The offsets are
+ * not assigned by the BIOS for this family, so the OS is
+ * responsible for doing it. If the OS assignment fails, fall
+ * back to BIOS settings and try to setup this.
+ */
+ if (boot_cpu_data.x86 == 0x10)
+ force_ibs_eilvt_setup();
+
+ if (!ibs_eilvt_valid())
+ goto out;
get_online_cpus();
ibs_caps = caps;
@@ -287,7 +290,11 @@
smp_call_function(setup_APIC_ibs, NULL, 1);
put_online_cpus();
- return perf_event_ibs_init();
+ ret = perf_event_ibs_init();
+out:
+ if (ret)
+ pr_err("Failed to setup IBS, %d\n", ret);
+ return ret;
}
/* Since we need the pci subsystem to init ibs we can't do this earlier: */
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 2be5ebe..3bd37bd 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -28,6 +28,7 @@
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
[PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
[PERF_COUNT_HW_BUS_CYCLES] = 0x013c,
+ [PERF_COUNT_HW_REF_CPU_CYCLES] = 0x0300, /* pseudo-encoding */
};
static struct event_constraint intel_core_event_constraints[] __read_mostly =
@@ -45,12 +46,7 @@
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
- /*
- * Core2 has Fixed Counter 2 listed as CPU_CLK_UNHALTED.REF and event
- * 0x013c as CPU_CLK_UNHALTED.BUS and specifies there is a fixed
- * ratio between these counters.
- */
- /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+ FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */
INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
@@ -68,7 +64,7 @@
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
- /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+ FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
INTEL_EVENT_CONSTRAINT(0x40, 0x3), /* L1D_CACHE_LD */
INTEL_EVENT_CONSTRAINT(0x41, 0x3), /* L1D_CACHE_ST */
INTEL_EVENT_CONSTRAINT(0x42, 0x3), /* L1D_CACHE_LOCK */
@@ -90,7 +86,7 @@
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
- /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+ FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
@@ -102,7 +98,7 @@
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
- /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+ FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.PENDING */
INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */
INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */
@@ -125,7 +121,7 @@
{
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
- /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+ FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
EVENT_CONSTRAINT_END
};
@@ -1169,7 +1165,7 @@
*/
c = &unconstrained;
} else if (intel_try_alt_er(event, orig_idx)) {
- raw_spin_unlock(&era->lock);
+ raw_spin_unlock_irqrestore(&era->lock, flags);
goto again;
}
raw_spin_unlock_irqrestore(&era->lock, flags);
@@ -1519,7 +1515,7 @@
.guest_get_msrs = intel_guest_get_msrs,
};
-static void intel_clovertown_quirks(void)
+static __init void intel_clovertown_quirk(void)
{
/*
* PEBS is unreliable due to:
@@ -1545,12 +1541,60 @@
x86_pmu.pebs_constraints = NULL;
}
+static __init void intel_sandybridge_quirk(void)
+{
+ printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
+ x86_pmu.pebs = 0;
+ x86_pmu.pebs_constraints = NULL;
+}
+
+static const struct { int id; char *name; } intel_arch_events_map[] __initconst = {
+ { PERF_COUNT_HW_CPU_CYCLES, "cpu cycles" },
+ { PERF_COUNT_HW_INSTRUCTIONS, "instructions" },
+ { PERF_COUNT_HW_BUS_CYCLES, "bus cycles" },
+ { PERF_COUNT_HW_CACHE_REFERENCES, "cache references" },
+ { PERF_COUNT_HW_CACHE_MISSES, "cache misses" },
+ { PERF_COUNT_HW_BRANCH_INSTRUCTIONS, "branch instructions" },
+ { PERF_COUNT_HW_BRANCH_MISSES, "branch misses" },
+};
+
+static __init void intel_arch_events_quirk(void)
+{
+ int bit;
+
+ /* disable event that reported as not presend by cpuid */
+ for_each_set_bit(bit, x86_pmu.events_mask, ARRAY_SIZE(intel_arch_events_map)) {
+ intel_perfmon_event_map[intel_arch_events_map[bit].id] = 0;
+ printk(KERN_WARNING "CPUID marked event: \'%s\' unavailable\n",
+ intel_arch_events_map[bit].name);
+ }
+}
+
+static __init void intel_nehalem_quirk(void)
+{
+ union cpuid10_ebx ebx;
+
+ ebx.full = x86_pmu.events_maskl;
+ if (ebx.split.no_branch_misses_retired) {
+ /*
+ * Erratum AAJ80 detected, we work it around by using
+ * the BR_MISP_EXEC.ANY event. This will over-count
+ * branch-misses, but it's still much better than the
+ * architectural event which is often completely bogus:
+ */
+ intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
+ ebx.split.no_branch_misses_retired = 0;
+ x86_pmu.events_maskl = ebx.full;
+ printk(KERN_INFO "CPU erratum AAJ80 worked around\n");
+ }
+}
+
__init int intel_pmu_init(void)
{
union cpuid10_edx edx;
union cpuid10_eax eax;
+ union cpuid10_ebx ebx;
unsigned int unused;
- unsigned int ebx;
int version;
if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
@@ -1567,8 +1611,8 @@
* Check whether the Architectural PerfMon supports
* Branch Misses Retired hw_event or not.
*/
- cpuid(10, &eax.full, &ebx, &unused, &edx.full);
- if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
+ cpuid(10, &eax.full, &ebx.full, &unused, &edx.full);
+ if (eax.split.mask_length < ARCH_PERFMON_EVENTS_COUNT)
return -ENODEV;
version = eax.split.version_id;
@@ -1582,6 +1626,9 @@
x86_pmu.cntval_bits = eax.split.bit_width;
x86_pmu.cntval_mask = (1ULL << eax.split.bit_width) - 1;
+ x86_pmu.events_maskl = ebx.full;
+ x86_pmu.events_mask_len = eax.split.mask_length;
+
/*
* Quirk: v2 perfmon does not report fixed-purpose events, so
* assume at least 3 events:
@@ -1601,6 +1648,8 @@
intel_ds_init();
+ x86_add_quirk(intel_arch_events_quirk); /* Install first, so it runs last */
+
/*
* Install the hw-cache-events table:
*/
@@ -1610,7 +1659,7 @@
break;
case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
- x86_pmu.quirks = intel_clovertown_quirks;
+ x86_add_quirk(intel_clovertown_quirk);
case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
case 29: /* six-core 45 nm xeon "Dunnington" */
@@ -1644,17 +1693,8 @@
/* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */
intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1;
- if (ebx & 0x40) {
- /*
- * Erratum AAJ80 detected, we work it around by using
- * the BR_MISP_EXEC.ANY event. This will over-count
- * branch-misses, but it's still much better than the
- * architectural event which is often completely bogus:
- */
- intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
+ x86_add_quirk(intel_nehalem_quirk);
- pr_cont("erratum AAJ80 worked around, ");
- }
pr_cont("Nehalem events, ");
break;
@@ -1694,6 +1734,7 @@
break;
case 42: /* SandyBridge */
+ x86_add_quirk(intel_sandybridge_quirk);
case 45: /* SandyBridge, "Romely-EP" */
memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
@@ -1730,5 +1771,6 @@
break;
}
}
+
return 0;
}
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index c0d238f..73da6b6 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -493,6 +493,7 @@
unsigned long from = cpuc->lbr_entries[0].from;
unsigned long old_to, to = cpuc->lbr_entries[0].to;
unsigned long ip = regs->ip;
+ int is_64bit = 0;
/*
* We don't need to fixup if the PEBS assist is fault like
@@ -544,7 +545,10 @@
} else
kaddr = (void *)to;
- kernel_insn_init(&insn, kaddr);
+#ifdef CONFIG_X86_64
+ is_64bit = kernel_ip(to) || !test_thread_flag(TIF_IA32);
+#endif
+ insn_init(&insn, kaddr, is_64bit);
insn_get_length(&insn);
to += insn.length;
} while (to < ip);
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index 492bf13..ef484d9 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -1268,7 +1268,7 @@
}
done:
- return num ? -ENOSPC : 0;
+ return num ? -EINVAL : 0;
}
static __initconst const struct x86_pmu p4_pmu = {
diff --git a/arch/x86/kernel/cpu/powerflags.c b/arch/x86/kernel/cpu/powerflags.c
index 5abbea2..7b3fe56 100644
--- a/arch/x86/kernel/cpu/powerflags.c
+++ b/arch/x86/kernel/cpu/powerflags.c
@@ -16,5 +16,6 @@
"100mhzsteps",
"hwpstate",
"", /* tsc invariant mapped to constant_tsc */
- /* nothing */
+ "cpb", /* core performance boost */
+ "eff_freq_ro", /* Readonly aperf/mperf */
};
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 14b2314..8022c66 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -64,12 +64,10 @@
static int show_cpuinfo(struct seq_file *m, void *v)
{
struct cpuinfo_x86 *c = v;
- unsigned int cpu = 0;
+ unsigned int cpu;
int i;
-#ifdef CONFIG_SMP
cpu = c->cpu_index;
-#endif
seq_printf(m, "processor\t: %u\n"
"vendor_id\t: %s\n"
"cpu family\t: %d\n"
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 212a6a4..a524353 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -177,7 +177,7 @@
.notifier_call = cpuid_class_cpu_callback,
};
-static char *cpuid_devnode(struct device *dev, mode_t *mode)
+static char *cpuid_devnode(struct device *dev, umode_t *mode)
{
return kasprintf(GFP_KERNEL, "cpu/%u/cpuid", MINOR(dev->devt));
}
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 3b97a80..c99f9ed 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -116,16 +116,16 @@
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
- printk(" Bad EIP value.");
+ printk(KERN_CONT " Bad EIP value.");
break;
}
if (ip == (u8 *)regs->ip)
- printk("<%02x> ", c);
+ printk(KERN_CONT "<%02x> ", c);
else
- printk("%02x ", c);
+ printk(KERN_CONT "%02x ", c);
}
}
- printk("\n");
+ printk(KERN_CONT "\n");
}
int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 19853ad..6d728d9 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -284,16 +284,16 @@
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
- printk(" Bad RIP value.");
+ printk(KERN_CONT " Bad RIP value.");
break;
}
if (ip == (u8 *)regs->ip)
- printk("<%02x> ", c);
+ printk(KERN_CONT "<%02x> ", c);
else
- printk("%02x ", c);
+ printk(KERN_CONT "%02x ", c);
}
}
- printk("\n");
+ printk(KERN_CONT "\n");
}
int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 303a0e4..8071e2f 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -738,35 +738,17 @@
/*
* pre allocated 4k and reserved it in memblock and e820_saved
*/
-u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
+u64 __init early_reserve_e820(u64 size, u64 align)
{
- u64 size = 0;
u64 addr;
- u64 start;
- for (start = startt; ; start += size) {
- start = memblock_x86_find_in_range_size(start, &size, align);
- if (start == MEMBLOCK_ERROR)
- return 0;
- if (size >= sizet)
- break;
+ addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
+ if (addr) {
+ e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED);
+ printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
+ update_e820_saved();
}
-#ifdef CONFIG_X86_32
- if (start >= MAXMEM)
- return 0;
- if (start + size > MAXMEM)
- size = MAXMEM - start;
-#endif
-
- addr = round_down(start + size - sizet, align);
- if (addr < start)
- return 0;
- memblock_x86_reserve_range(addr, addr + sizet, "new next");
- e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
- printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
- update_e820_saved();
-
return addr;
}
@@ -1090,7 +1072,7 @@
* We are safe to enable resizing, beause memblock_x86_fill()
* is rather later for x86
*/
- memblock_can_resize = 1;
+ memblock_allow_resize();
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
@@ -1105,22 +1087,36 @@
memblock_add(ei->addr, ei->size);
}
- memblock_analyze();
memblock_dump_all();
}
void __init memblock_find_dma_reserve(void)
{
#ifdef CONFIG_X86_64
- u64 free_size_pfn;
- u64 mem_size_pfn;
+ u64 nr_pages = 0, nr_free_pages = 0;
+ unsigned long start_pfn, end_pfn;
+ phys_addr_t start, end;
+ int i;
+ u64 u;
+
/*
* need to find out used area below MAX_DMA_PFN
* need to use memblock to get free size in [0, MAX_DMA_PFN]
* at first, and assume boot_mem will not take below MAX_DMA_PFN
*/
- mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
- free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
- set_dma_reserve(mem_size_pfn - free_size_pfn);
+ for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
+ start_pfn = min_t(unsigned long, start_pfn, MAX_DMA_PFN);
+ end_pfn = min_t(unsigned long, end_pfn, MAX_DMA_PFN);
+ nr_pages += end_pfn - start_pfn;
+ }
+
+ for_each_free_mem_range(u, MAX_NUMNODES, &start, &end, NULL) {
+ start_pfn = min_t(unsigned long, PFN_UP(start), MAX_DMA_PFN);
+ end_pfn = min_t(unsigned long, PFN_DOWN(end), MAX_DMA_PFN);
+ if (start_pfn < end_pfn)
+ nr_free_pages += end_pfn - start_pfn;
+ }
+
+ set_dma_reserve(nr_pages - nr_free_pages);
#endif
}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index f3f6f53..22d0e21 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -625,6 +625,8 @@
movl %esp, %eax
jne work_notifysig_v86 # returning to kernel-space or
# vm86-space
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
xorl %edx, %edx
call do_notify_resume
jmp resume_userspace_sig
@@ -638,6 +640,8 @@
#else
movl %esp, %eax
#endif
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
xorl %edx, %edx
call do_notify_resume
jmp resume_userspace_sig
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index faf8d5e..a20e1cb 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -221,7 +221,7 @@
/*CFI_REL_OFFSET ss,0*/
pushq_cfi %rax /* rsp */
CFI_REL_OFFSET rsp,0
- pushq_cfi $X86_EFLAGS_IF /* eflags - interrupts on */
+ pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_BIT1) /* eflags - interrupts on */
/*CFI_REL_OFFSET rflags,0*/
pushq_cfi $__KERNEL_CS /* cs */
/*CFI_REL_OFFSET cs,0*/
@@ -411,7 +411,7 @@
RESTORE_REST
testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread?
- je int_ret_from_sys_call
+ jz retint_restore_args
testl $_TIF_IA32, TI_flags(%rcx) # 32-bit compat task needs IRET
jnz int_ret_from_sys_call
@@ -465,7 +465,7 @@
* after the swapgs, so that it can do the swapgs
* for the guest and jump here on syscall.
*/
-ENTRY(system_call_after_swapgs)
+GLOBAL(system_call_after_swapgs)
movq %rsp,PER_CPU_VAR(old_rsp)
movq PER_CPU_VAR(kernel_stack),%rsp
@@ -478,8 +478,7 @@
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
- GET_THREAD_INFO(%rcx)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz tracesys
system_call_fastpath:
cmpq $__NR_syscall_max,%rax
@@ -496,10 +495,9 @@
/* edi: flagmask */
sysret_check:
LOCKDEP_SYS_EXIT
- GET_THREAD_INFO(%rcx)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl TI_flags(%rcx),%edx
+ movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx
andl %edi,%edx
jnz sysret_careful
CFI_REMEMBER_STATE
@@ -583,7 +581,7 @@
/* Do syscall tracing */
tracesys:
#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jz auditsys
#endif
SAVE_REST
@@ -612,8 +610,6 @@
GLOBAL(int_ret_from_sys_call)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $3,CS-ARGOFFSET(%rsp)
- je retint_restore_args
movl $_TIF_ALLWORK_MASK,%edi
/* edi: mask to check */
GLOBAL(int_with_check)
@@ -953,6 +949,7 @@
ENTRY(\sym)
INTR_FRAME
pushq_cfi $~(\num)
+.Lcommon_\sym:
interrupt \do_sym
jmp ret_from_intr
CFI_ENDPROC
@@ -976,13 +973,21 @@
x86_platform_ipi smp_x86_platform_ipi
#ifdef CONFIG_SMP
-.irp idx,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \
+ ALIGN
+ INTR_FRAME
+.irp idx,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \
16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
.if NUM_INVALIDATE_TLB_VECTORS > \idx
-apicinterrupt (INVALIDATE_TLB_VECTOR_START)+\idx \
- invalidate_interrupt\idx smp_invalidate_interrupt
+ENTRY(invalidate_interrupt\idx)
+ pushq_cfi $~(INVALIDATE_TLB_VECTOR_START+\idx)
+ jmp .Lcommon_invalidate_interrupt0
+ CFI_ADJUST_CFA_OFFSET -8
+END(invalidate_interrupt\idx)
.endif
.endr
+ CFI_ENDPROC
+apicinterrupt INVALIDATE_TLB_VECTOR_START, \
+ invalidate_interrupt0, smp_invalidate_interrupt
#endif
apicinterrupt THRESHOLD_APIC_VECTOR \
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
index af0699b..48d9d4e 100644
--- a/arch/x86/kernel/head.c
+++ b/arch/x86/kernel/head.c
@@ -52,5 +52,5 @@
lowmem = 0x9f000;
/* reserve all memory between lowmem and the 1MB mark */
- memblock_x86_reserve_range(lowmem, 0x100000, "* BIOS reserved");
+ memblock_reserve(lowmem, 0x100000 - lowmem);
}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 3bb0850..51ff186 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -31,9 +31,8 @@
void __init i386_start_kernel(void)
{
- memblock_init();
-
- memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
+ memblock_reserve(__pa_symbol(&_text),
+ __pa_symbol(&__bss_stop) - __pa_symbol(&_text));
#ifdef CONFIG_BLK_DEV_INITRD
/* Reserve INITRD */
@@ -42,7 +41,7 @@
u64 ramdisk_image = boot_params.hdr.ramdisk_image;
u64 ramdisk_size = boot_params.hdr.ramdisk_size;
u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
- memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
+ memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
}
#endif
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 5655c22..3a3b779 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -98,9 +98,8 @@
{
copy_bootdata(__va(real_mode_data));
- memblock_init();
-
- memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
+ memblock_reserve(__pa_symbol(&_text),
+ __pa_symbol(&__bss_stop) - __pa_symbol(&_text));
#ifdef CONFIG_BLK_DEV_INITRD
/* Reserve INITRD */
@@ -109,7 +108,7 @@
unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
unsigned long ramdisk_size = boot_params.hdr.ramdisk_size;
unsigned long ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
- memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
+ memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
}
#endif
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index b946a9e..ad0de0c 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -2,7 +2,6 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/export.h>
-#include <linux/sysdev.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/i8253.h>
@@ -32,8 +31,6 @@
#define HPET_MIN_CYCLES 128
#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
-#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
-
/*
* HPET address is set in acpi/boot.c, when an ACPI entry exists
*/
@@ -55,6 +52,11 @@
char name[10];
};
+inline struct hpet_dev *EVT_TO_HPET_DEV(struct clock_event_device *evtdev)
+{
+ return container_of(evtdev, struct hpet_dev, evt);
+}
+
inline unsigned int hpet_readl(unsigned int a)
{
return readl(hpet_virt_address + a);
@@ -1049,6 +1051,14 @@
}
EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
+static void hpet_disable_rtc_channel(void)
+{
+ unsigned long cfg;
+ cfg = hpet_readl(HPET_T1_CFG);
+ cfg &= ~HPET_TN_ENABLE;
+ hpet_writel(cfg, HPET_T1_CFG);
+}
+
/*
* The functions below are called from rtc driver.
* Return 0 if HPET is not being used.
@@ -1060,6 +1070,9 @@
return 0;
hpet_rtc_flags &= ~bit_mask;
+ if (unlikely(!hpet_rtc_flags))
+ hpet_disable_rtc_channel();
+
return 1;
}
EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
@@ -1125,15 +1138,11 @@
static void hpet_rtc_timer_reinit(void)
{
- unsigned int cfg, delta;
+ unsigned int delta;
int lost_ints = -1;
- if (unlikely(!hpet_rtc_flags)) {
- cfg = hpet_readl(HPET_T1_CFG);
- cfg &= ~HPET_TN_ENABLE;
- hpet_writel(cfg, HPET_T1_CFG);
- return;
- }
+ if (unlikely(!hpet_rtc_flags))
+ hpet_disable_rtc_channel();
if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
delta = hpet_default_delta;
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 429e0c9..7943e0c 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -74,6 +74,10 @@
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->apic_irq_work_irqs);
seq_printf(p, " IRQ work interrupts\n");
+ seq_printf(p, "%*s: ", prec, "RTR");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", irq_stats(j)->icr_read_retry_count);
+ seq_printf(p, " APIC ICR read retries\n");
#endif
if (x86_platform_ipi_callback) {
seq_printf(p, "%*s: ", prec, "PLT");
@@ -136,6 +140,7 @@
sum += irq_stats(cpu)->irq_spurious_count;
sum += irq_stats(cpu)->apic_perf_irqs;
sum += irq_stats(cpu)->apic_irq_work_irqs;
+ sum += irq_stats(cpu)->icr_read_retry_count;
#endif
if (x86_platform_ipi_callback)
sum += irq_stats(cpu)->x86_platform_ipis;
@@ -181,8 +186,8 @@
unsigned vector = ~regs->orig_ax;
unsigned irq;
- exit_idle();
irq_enter();
+ exit_idle();
irq = __this_cpu_read(vector_irq[vector]);
@@ -209,10 +214,10 @@
ack_APIC_irq();
- exit_idle();
-
irq_enter();
+ exit_idle();
+
inc_irq_stat(x86_platform_ipis);
if (x86_platform_ipi_callback)
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index acf8fbf..69bca46 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -38,6 +38,9 @@
#ifdef CONFIG_DEBUG_STACKOVERFLOW
u64 curbase = (u64)task_stack_page(current);
+ if (user_mode_vm(regs))
+ return;
+
WARN_ONCE(regs->sp >= curbase &&
regs->sp <= curbase + THREAD_SIZE &&
regs->sp < curbase + sizeof(struct thread_info) +
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index b3300e6..313fb5c 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -9,7 +9,7 @@
#include <linux/kprobes.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/bitops.h>
#include <linux/acpi.h>
#include <linux/io.h>
diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index ea9d5f2f..2889b3d 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -50,7 +50,7 @@
put_online_cpus();
}
-void arch_jump_label_transform_static(struct jump_entry *entry,
+__init_or_module void arch_jump_label_transform_static(struct jump_entry *entry,
enum jump_label_type type)
{
__jump_label_transform(entry, type, text_poke_early);
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index d494799..fe86493 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -1,14 +1,18 @@
/*
* AMD CPU Microcode Update Driver for Linux
- * Copyright (C) 2008 Advanced Micro Devices Inc.
+ * Copyright (C) 2008-2011 Advanced Micro Devices Inc.
*
* Author: Peter Oruba <peter.oruba@amd.com>
*
* Based on work by:
* Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
*
- * This driver allows to upgrade microcode on AMD
- * family 0x10 and 0x11 processors.
+ * Maintainers:
+ * Andreas Herrmann <andreas.herrmann3@amd.com>
+ * Borislav Petkov <borislav.petkov@amd.com>
+ *
+ * This driver allows to upgrade microcode on F10h AMD
+ * CPUs and later.
*
* Licensed under the terms of the GNU General Public
* License version 2. See file COPYING for details.
@@ -71,6 +75,9 @@
static struct equiv_cpu_entry *equiv_cpu_table;
+/* page-sized ucode patch buffer */
+void *patch;
+
static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
@@ -86,27 +93,76 @@
return 0;
}
-static int get_matching_microcode(int cpu, struct microcode_header_amd *mc_hdr,
- int rev)
+static unsigned int verify_ucode_size(int cpu, u32 patch_size,
+ unsigned int size)
{
- unsigned int current_cpu_id;
- u16 equiv_cpu_id = 0;
- unsigned int i = 0;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+ u32 max_size;
+
+#define F1XH_MPB_MAX_SIZE 2048
+#define F14H_MPB_MAX_SIZE 1824
+#define F15H_MPB_MAX_SIZE 4096
+
+ switch (c->x86) {
+ case 0x14:
+ max_size = F14H_MPB_MAX_SIZE;
+ break;
+ case 0x15:
+ max_size = F15H_MPB_MAX_SIZE;
+ break;
+ default:
+ max_size = F1XH_MPB_MAX_SIZE;
+ break;
+ }
+
+ if (patch_size > min_t(u32, size, max_size)) {
+ pr_err("patch size mismatch\n");
+ return 0;
+ }
+
+ return patch_size;
+}
+
+static u16 find_equiv_id(void)
+{
+ unsigned int current_cpu_id, i = 0;
BUG_ON(equiv_cpu_table == NULL);
+
current_cpu_id = cpuid_eax(0x00000001);
while (equiv_cpu_table[i].installed_cpu != 0) {
- if (current_cpu_id == equiv_cpu_table[i].installed_cpu) {
- equiv_cpu_id = equiv_cpu_table[i].equiv_cpu;
- break;
- }
+ if (current_cpu_id == equiv_cpu_table[i].installed_cpu)
+ return equiv_cpu_table[i].equiv_cpu;
+
i++;
}
+ return 0;
+}
+/*
+ * we signal a good patch is found by returning its size > 0
+ */
+static int get_matching_microcode(int cpu, const u8 *ucode_ptr,
+ unsigned int leftover_size, int rev,
+ unsigned int *current_size)
+{
+ struct microcode_header_amd *mc_hdr;
+ unsigned int actual_size;
+ u16 equiv_cpu_id;
+
+ /* size of the current patch we're staring at */
+ *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE;
+
+ equiv_cpu_id = find_equiv_id();
if (!equiv_cpu_id)
return 0;
+ /*
+ * let's look at the patch header itself now
+ */
+ mc_hdr = (struct microcode_header_amd *)(ucode_ptr + SECTION_HDR_SIZE);
+
if (mc_hdr->processor_rev_id != equiv_cpu_id)
return 0;
@@ -120,7 +176,20 @@
if (mc_hdr->patch_id <= rev)
return 0;
- return 1;
+ /*
+ * now that the header looks sane, verify its size
+ */
+ actual_size = verify_ucode_size(cpu, *current_size, leftover_size);
+ if (!actual_size)
+ return 0;
+
+ /* clear the patch buffer */
+ memset(patch, 0, PAGE_SIZE);
+
+ /* all looks ok, get the binary patch */
+ get_ucode_data(patch, ucode_ptr + SECTION_HDR_SIZE, actual_size);
+
+ return actual_size;
}
static int apply_microcode_amd(int cpu)
@@ -155,63 +224,6 @@
return 0;
}
-static unsigned int verify_ucode_size(int cpu, const u8 *buf, unsigned int size)
-{
- struct cpuinfo_x86 *c = &cpu_data(cpu);
- u32 max_size, actual_size;
-
-#define F1XH_MPB_MAX_SIZE 2048
-#define F14H_MPB_MAX_SIZE 1824
-#define F15H_MPB_MAX_SIZE 4096
-
- switch (c->x86) {
- case 0x14:
- max_size = F14H_MPB_MAX_SIZE;
- break;
- case 0x15:
- max_size = F15H_MPB_MAX_SIZE;
- break;
- default:
- max_size = F1XH_MPB_MAX_SIZE;
- break;
- }
-
- actual_size = *(u32 *)(buf + 4);
-
- if (actual_size + SECTION_HDR_SIZE > size || actual_size > max_size) {
- pr_err("section size mismatch\n");
- return 0;
- }
-
- return actual_size;
-}
-
-static struct microcode_header_amd *
-get_next_ucode(int cpu, const u8 *buf, unsigned int size, unsigned int *mc_size)
-{
- struct microcode_header_amd *mc = NULL;
- unsigned int actual_size = 0;
-
- if (*(u32 *)buf != UCODE_UCODE_TYPE) {
- pr_err("invalid type field in container file section header\n");
- goto out;
- }
-
- actual_size = verify_ucode_size(cpu, buf, size);
- if (!actual_size)
- goto out;
-
- mc = vzalloc(actual_size);
- if (!mc)
- goto out;
-
- get_ucode_data(mc, buf + SECTION_HDR_SIZE, actual_size);
- *mc_size = actual_size + SECTION_HDR_SIZE;
-
-out:
- return mc;
-}
-
static int install_equiv_cpu_table(const u8 *buf)
{
unsigned int *ibuf = (unsigned int *)buf;
@@ -247,36 +259,38 @@
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
struct microcode_header_amd *mc_hdr = NULL;
- unsigned int mc_size, leftover;
+ unsigned int mc_size, leftover, current_size = 0;
int offset;
const u8 *ucode_ptr = data;
void *new_mc = NULL;
unsigned int new_rev = uci->cpu_sig.rev;
- enum ucode_state state = UCODE_OK;
+ enum ucode_state state = UCODE_ERROR;
offset = install_equiv_cpu_table(ucode_ptr);
if (offset < 0) {
pr_err("failed to create equivalent cpu table\n");
- return UCODE_ERROR;
+ goto out;
}
-
ucode_ptr += offset;
leftover = size - offset;
+ if (*(u32 *)ucode_ptr != UCODE_UCODE_TYPE) {
+ pr_err("invalid type field in container file section header\n");
+ goto free_table;
+ }
+
while (leftover) {
- mc_hdr = get_next_ucode(cpu, ucode_ptr, leftover, &mc_size);
- if (!mc_hdr)
- break;
-
- if (get_matching_microcode(cpu, mc_hdr, new_rev)) {
- vfree(new_mc);
+ mc_size = get_matching_microcode(cpu, ucode_ptr, leftover,
+ new_rev, ¤t_size);
+ if (mc_size) {
+ mc_hdr = patch;
+ new_mc = patch;
new_rev = mc_hdr->patch_id;
- new_mc = mc_hdr;
- } else
- vfree(mc_hdr);
+ goto out_ok;
+ }
- ucode_ptr += mc_size;
- leftover -= mc_size;
+ ucode_ptr += current_size;
+ leftover -= current_size;
}
if (!new_mc) {
@@ -284,19 +298,16 @@
goto free_table;
}
- if (!leftover) {
- vfree(uci->mc);
- uci->mc = new_mc;
- pr_debug("CPU%d update ucode (0x%08x -> 0x%08x)\n",
- cpu, uci->cpu_sig.rev, new_rev);
- } else {
- vfree(new_mc);
- state = UCODE_ERROR;
- }
+out_ok:
+ uci->mc = new_mc;
+ state = UCODE_OK;
+ pr_debug("CPU%d update ucode (0x%08x -> 0x%08x)\n",
+ cpu, uci->cpu_sig.rev, new_rev);
free_table:
free_equiv_cpu_table();
+out:
return state;
}
@@ -337,7 +348,6 @@
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- vfree(uci->mc);
uci->mc = NULL;
}
@@ -351,5 +361,14 @@
struct microcode_ops * __init init_amd_microcode(void)
{
+ patch = (void *)get_zeroed_page(GFP_KERNEL);
+ if (!patch)
+ return NULL;
+
return µcode_amd_ops;
}
+
+void __exit exit_amd_microcode(void)
+{
+ free_page((unsigned long)patch);
+}
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index f2d2a66..fda91c3 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -256,7 +256,7 @@
return 0;
}
-static void microcode_dev_exit(void)
+static void __exit microcode_dev_exit(void)
{
misc_deregister(µcode_dev);
}
@@ -292,8 +292,8 @@
return err;
}
-static ssize_t reload_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t reload_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t size)
{
unsigned long val;
@@ -318,30 +318,30 @@
return ret;
}
-static ssize_t version_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
}
-static ssize_t pf_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
+static ssize_t pf_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
}
-static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
-static SYSDEV_ATTR(version, 0400, version_show, NULL);
-static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
+static DEVICE_ATTR(reload, 0200, NULL, reload_store);
+static DEVICE_ATTR(version, 0400, version_show, NULL);
+static DEVICE_ATTR(processor_flags, 0400, pf_show, NULL);
static struct attribute *mc_default_attrs[] = {
- &attr_reload.attr,
- &attr_version.attr,
- &attr_processor_flags.attr,
+ &dev_attr_reload.attr,
+ &dev_attr_version.attr,
+ &dev_attr_processor_flags.attr,
NULL
};
@@ -405,43 +405,45 @@
return ustate;
}
-static int mc_sysdev_add(struct sys_device *sys_dev)
+static int mc_device_add(struct device *dev, struct subsys_interface *sif)
{
- int err, cpu = sys_dev->id;
+ int err, cpu = dev->id;
if (!cpu_online(cpu))
return 0;
pr_debug("CPU%d added\n", cpu);
- err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
+ err = sysfs_create_group(&dev->kobj, &mc_attr_group);
if (err)
return err;
if (microcode_init_cpu(cpu) == UCODE_ERROR) {
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+ sysfs_remove_group(&dev->kobj, &mc_attr_group);
return -EINVAL;
}
return err;
}
-static int mc_sysdev_remove(struct sys_device *sys_dev)
+static int mc_device_remove(struct device *dev, struct subsys_interface *sif)
{
- int cpu = sys_dev->id;
+ int cpu = dev->id;
if (!cpu_online(cpu))
return 0;
pr_debug("CPU%d removed\n", cpu);
microcode_fini_cpu(cpu);
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+ sysfs_remove_group(&dev->kobj, &mc_attr_group);
return 0;
}
-static struct sysdev_driver mc_sysdev_driver = {
- .add = mc_sysdev_add,
- .remove = mc_sysdev_remove,
+static struct subsys_interface mc_cpu_interface = {
+ .name = "microcode",
+ .subsys = &cpu_subsys,
+ .add_dev = mc_device_add,
+ .remove_dev = mc_device_remove,
};
/**
@@ -464,9 +466,9 @@
mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
- struct sys_device *sys_dev;
+ struct device *dev;
- sys_dev = get_cpu_sysdev(cpu);
+ dev = get_cpu_device(cpu);
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
@@ -474,13 +476,13 @@
case CPU_DOWN_FAILED:
case CPU_DOWN_FAILED_FROZEN:
pr_debug("CPU%d added\n", cpu);
- if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
+ if (sysfs_create_group(&dev->kobj, &mc_attr_group))
pr_err("Failed to create group for CPU%d\n", cpu);
break;
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
/* Suspend is in progress, only remove the interface */
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+ sysfs_remove_group(&dev->kobj, &mc_attr_group);
pr_debug("CPU%d removed\n", cpu);
break;
@@ -519,27 +521,23 @@
microcode_pdev = platform_device_register_simple("microcode", -1,
NULL, 0);
- if (IS_ERR(microcode_pdev)) {
- microcode_dev_exit();
+ if (IS_ERR(microcode_pdev))
return PTR_ERR(microcode_pdev);
- }
get_online_cpus();
mutex_lock(µcode_mutex);
- error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+ error = subsys_interface_register(&mc_cpu_interface);
mutex_unlock(µcode_mutex);
put_online_cpus();
- if (error) {
- platform_device_unregister(microcode_pdev);
- return error;
- }
+ if (error)
+ goto out_pdev;
error = microcode_dev_init();
if (error)
- return error;
+ goto out_driver;
register_syscore_ops(&mc_syscore_ops);
register_hotcpu_notifier(&mc_cpu_notifier);
@@ -548,11 +546,27 @@
" <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
return 0;
+
+out_driver:
+ get_online_cpus();
+ mutex_lock(µcode_mutex);
+
+ subsys_interface_unregister(&mc_cpu_interface);
+
+ mutex_unlock(µcode_mutex);
+ put_online_cpus();
+
+out_pdev:
+ platform_device_unregister(microcode_pdev);
+ return error;
+
}
module_init(microcode_init);
static void __exit microcode_exit(void)
{
+ struct cpuinfo_x86 *c = &cpu_data(0);
+
microcode_dev_exit();
unregister_hotcpu_notifier(&mc_cpu_notifier);
@@ -561,7 +575,7 @@
get_online_cpus();
mutex_lock(µcode_mutex);
- sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+ subsys_interface_unregister(&mc_cpu_interface);
mutex_unlock(µcode_mutex);
put_online_cpus();
@@ -570,6 +584,9 @@
microcode_ops = NULL;
+ if (c->x86_vendor == X86_VENDOR_AMD)
+ exit_amd_microcode();
+
pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
}
module_exit(microcode_exit);
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 9103b89..ca470e4 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -95,8 +95,8 @@
}
#endif
+ set_bit(m->busid, mp_bus_not_pci);
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
- set_bit(m->busid, mp_bus_not_pci);
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
#endif
@@ -564,9 +564,7 @@
static void __init smp_reserve_memory(struct mpf_intel *mpf)
{
- unsigned long size = get_mpc_size(mpf->physptr);
-
- memblock_x86_reserve_range(mpf->physptr, mpf->physptr+size, "* MP-table mpc");
+ memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
}
static int __init smp_scan_config(unsigned long base, unsigned long length)
@@ -595,7 +593,7 @@
mpf, (u64)virt_to_phys(mpf));
mem = virt_to_phys(mpf);
- memblock_x86_reserve_range(mem, mem + sizeof(*mpf), "* MP-table mpf");
+ memblock_reserve(mem, sizeof(*mpf));
if (mpf->physptr)
smp_reserve_memory(mpf);
@@ -836,10 +834,8 @@
void __init early_reserve_e820_mpc_new(void)
{
- if (enable_update_mptable && alloc_mptable) {
- u64 startt = 0;
- mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4);
- }
+ if (enable_update_mptable && alloc_mptable)
+ mpc_new_phys = early_reserve_e820(mpc_new_length, 4);
}
static int __init update_mp_table(void)
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 12fcbe2..9635676 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -236,7 +236,7 @@
.notifier_call = msr_class_cpu_callback,
};
-static char *msr_devnode(struct device *dev, mode_t *mode)
+static char *msr_devnode(struct device *dev, umode_t *mode)
{
return kasprintf(GFP_KERNEL, "cpu/%u/msr", MINOR(dev->devt));
}
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index b9b3b1a..15763af 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -293,7 +293,7 @@
regs.orig_ax = -1;
regs.ip = (unsigned long) kernel_thread_helper;
regs.cs = __KERNEL_CS | get_kernel_rpl();
- regs.flags = X86_EFLAGS_IF | 0x2;
+ regs.flags = X86_EFLAGS_IF | X86_EFLAGS_BIT1;
/* Ok, create the new process.. */
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
@@ -403,6 +403,14 @@
EXPORT_SYMBOL(default_idle);
#endif
+bool set_pm_idle_to_default(void)
+{
+ bool ret = !!pm_idle;
+
+ pm_idle = default_idle;
+
+ return ret;
+}
void stop_this_cpu(void *dummy)
{
local_irq_disable();
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 795b79f..485204f 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -99,7 +99,8 @@
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched()) {
check_pgt_cache();
@@ -116,7 +117,8 @@
pm_idle();
start_critical_timings();
}
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 3bd7e6e..9b9fe4a 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -122,7 +122,7 @@
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
while (!need_resched()) {
rmb();
@@ -139,8 +139,14 @@
enter_idle();
/* Don't trace irqs off for idle */
stop_critical_timings();
+
+ /* enter_idle() needs rcu for notifiers */
+ rcu_idle_enter();
+
if (cpuidle_idle_call())
pm_idle();
+
+ rcu_idle_exit();
start_critical_timings();
/* In many cases the interrupt that ended idle
@@ -149,7 +155,7 @@
__exit_idle();
}
- tick_nohz_restart_sched_tick();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
@@ -293,13 +299,12 @@
memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
- p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
+ p->thread.io_bitmap_ptr = kmemdup(me->thread.io_bitmap_ptr,
+ IO_BITMAP_BYTES, GFP_KERNEL);
if (!p->thread.io_bitmap_ptr) {
p->thread.io_bitmap_max = 0;
return -ENOMEM;
}
- memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr,
- IO_BITMAP_BYTES);
set_tsk_thread_flag(p, TIF_IO_BITMAP);
}
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 8252879..89a04c7 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -749,7 +749,8 @@
/*
* Handle PTRACE_POKEUSR calls for the debug register area.
*/
-int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val)
+static int ptrace_set_debugreg(struct task_struct *tsk, int n,
+ unsigned long val)
{
struct thread_struct *thread = &(tsk->thread);
int rc = 0;
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index b78643d..03920a1 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -553,4 +553,17 @@
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
+ quirk_amd_nb_node);
+
#endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index e334be1..37a458b 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -124,7 +124,7 @@
*/
/*
- * Some machines require the "reboot=b" commandline option,
+ * Some machines require the "reboot=b" or "reboot=k" commandline options,
* this quirk makes that automatic.
*/
static int __init set_bios_reboot(const struct dmi_system_id *d)
@@ -136,6 +136,15 @@
return 0;
}
+static int __init set_kbd_reboot(const struct dmi_system_id *d)
+{
+ if (reboot_type != BOOT_KBD) {
+ reboot_type = BOOT_KBD;
+ printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident);
+ }
+ return 0;
+}
+
static struct dmi_system_id __initdata reboot_dmi_table[] = {
{ /* Handle problems with rebooting on Dell E520's */
.callback = set_bios_reboot,
@@ -295,7 +304,7 @@
},
},
{ /* Handle reboot issue on Acer Aspire one */
- .callback = set_bios_reboot,
+ .callback = set_kbd_reboot,
.ident = "Acer Aspire One A110",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -443,6 +452,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"),
},
},
+ { /* Handle problems with rebooting on the OptiPlex 990. */
+ .callback = set_pci_reboot,
+ .ident = "Dell OptiPlex 990",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
+ },
+ },
{ }
};
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 348ce01..af6db6e 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -12,6 +12,7 @@
#include <asm/vsyscall.h>
#include <asm/x86_init.h>
#include <asm/time.h>
+#include <asm/mrst.h>
#ifdef CONFIG_X86_32
/*
@@ -242,6 +243,10 @@
if (of_have_populated_dt())
return 0;
+ /* Intel MID platforms don't have ioport rtc */
+ if (mrst_identify_cpu())
+ return -ENODEV;
+
platform_device_register(&rtc_device);
dev_info(&rtc_device.dev,
"registered platform RTC device (no PNP device found)\n");
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index cf0ef98..d05444a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -306,7 +306,8 @@
static void __init reserve_brk(void)
{
if (_brk_end > _brk_start)
- memblock_x86_reserve_range(__pa(_brk_start), __pa(_brk_end), "BRK");
+ memblock_reserve(__pa(_brk_start),
+ __pa(_brk_end) - __pa(_brk_start));
/* Mark brk area as locked down and no longer taking any
new allocations */
@@ -331,13 +332,13 @@
ramdisk_here = memblock_find_in_range(0, end_of_lowmem, area_size,
PAGE_SIZE);
- if (ramdisk_here == MEMBLOCK_ERROR)
+ if (!ramdisk_here)
panic("Cannot find place for new RAMDISK of size %lld\n",
ramdisk_size);
/* Note: this includes all the lowmem currently occupied by
the initrd, we rely on that fact to keep the data intact. */
- memblock_x86_reserve_range(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK");
+ memblock_reserve(ramdisk_here, area_size);
initrd_start = ramdisk_here + PAGE_OFFSET;
initrd_end = initrd_start + ramdisk_size;
printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
@@ -393,7 +394,7 @@
initrd_start = 0;
if (ramdisk_size >= (end_of_lowmem>>1)) {
- memblock_x86_free_range(ramdisk_image, ramdisk_end);
+ memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
printk(KERN_ERR "initrd too large to handle, "
"disabling initrd\n");
return;
@@ -416,7 +417,7 @@
relocate_initrd();
- memblock_x86_free_range(ramdisk_image, ramdisk_end);
+ memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
}
#else
static void __init reserve_initrd(void)
@@ -490,15 +491,13 @@
{
struct setup_data *data;
u64 pa_data;
- char buf[32];
if (boot_params.hdr.version < 0x0209)
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
data = early_memremap(pa_data, sizeof(*data));
- sprintf(buf, "setup data %x", data->type);
- memblock_x86_reserve_range(pa_data, pa_data+sizeof(*data)+data->len, buf);
+ memblock_reserve(pa_data, sizeof(*data) + data->len);
pa_data = data->next;
early_iounmap(data, sizeof(*data));
}
@@ -554,7 +553,7 @@
crash_base = memblock_find_in_range(alignment,
CRASH_KERNEL_ADDR_MAX, crash_size, alignment);
- if (crash_base == MEMBLOCK_ERROR) {
+ if (!crash_base) {
pr_info("crashkernel reservation failed - No suitable area found.\n");
return;
}
@@ -568,7 +567,7 @@
return;
}
}
- memblock_x86_reserve_range(crash_base, crash_base + crash_size, "CRASH KERNEL");
+ memblock_reserve(crash_base, crash_size);
printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
"for crashkernel (System RAM: %ldMB)\n",
@@ -626,7 +625,7 @@
addr = find_ibft_region(&size);
if (size)
- memblock_x86_reserve_range(addr, addr + size, "* ibft");
+ memblock_reserve(addr, size);
}
static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 9f548cb..e38e217 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -840,7 +840,8 @@
pr_debug("++++++++++++++++++++=_---CPU UP %u\n", cpu);
if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
- !physid_isset(apicid, phys_cpu_present_map)) {
+ !physid_isset(apicid, phys_cpu_present_map) ||
+ (!x2apic_mode && apicid >= 255)) {
printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
return -EINVAL;
}
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index a91ae77..a73b610 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -14,11 +14,11 @@
/* Has to be in very low memory so we can execute real-mode AP code. */
mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE);
- if (mem == MEMBLOCK_ERROR)
+ if (!mem)
panic("Cannot allocate trampoline\n");
x86_trampoline_base = __va(mem);
- memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE");
+ memblock_reserve(mem, size);
printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
x86_trampoline_base, (unsigned long long)mem, size);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a8e3eb8..fa1191fb 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -306,15 +306,10 @@
== NOTIFY_STOP)
return;
#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
-#ifdef CONFIG_KPROBES
+
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
== NOTIFY_STOP)
return;
-#else
- if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP)
- == NOTIFY_STOP)
- return;
-#endif
preempt_conditional_sti(regs);
do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index db48336..2c9cf0f 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -35,7 +35,7 @@
erroneous rdtsc usage on !cpu_has_tsc processors */
static int __read_mostly tsc_disabled = -1;
-static int tsc_clocksource_reliable;
+int tsc_clocksource_reliable;
/*
* Scheduler clock - returns current time in nanosec units.
*/
@@ -178,11 +178,11 @@
}
#define CAL_MS 10
-#define CAL_LATCH (CLOCK_TICK_RATE / (1000 / CAL_MS))
+#define CAL_LATCH (PIT_TICK_RATE / (1000 / CAL_MS))
#define CAL_PIT_LOOPS 1000
#define CAL2_MS 50
-#define CAL2_LATCH (CLOCK_TICK_RATE / (1000 / CAL2_MS))
+#define CAL2_LATCH (PIT_TICK_RATE / (1000 / CAL2_MS))
#define CAL2_PIT_LOOPS 5000
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 0aa5fed8..9eba29b 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -113,7 +113,7 @@
if (unsynchronized_tsc())
return;
- if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
+ if (tsc_clocksource_reliable) {
if (cpu == (nr_cpu_ids-1) || system_state != SYSTEM_BOOTING)
pr_info(
"Skipped synchronization checks as TSC is reliable.\n");
@@ -172,7 +172,7 @@
{
int cpus = 2;
- if (unsynchronized_tsc() || boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
+ if (unsynchronized_tsc() || tsc_clocksource_reliable)
return;
/*
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index e4d4a22..b07ba93 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -57,7 +57,7 @@
.lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock),
};
-static enum { EMULATE, NATIVE, NONE } vsyscall_mode = NATIVE;
+static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE;
static int __init vsyscall_setup(char *str)
{
@@ -140,11 +140,40 @@
return nr;
}
+static bool write_ok_or_segv(unsigned long ptr, size_t size)
+{
+ /*
+ * XXX: if access_ok, get_user, and put_user handled
+ * sig_on_uaccess_error, this could go away.
+ */
+
+ if (!access_ok(VERIFY_WRITE, (void __user *)ptr, size)) {
+ siginfo_t info;
+ struct thread_struct *thread = ¤t->thread;
+
+ thread->error_code = 6; /* user fault, no page, write */
+ thread->cr2 = ptr;
+ thread->trap_no = 14;
+
+ memset(&info, 0, sizeof(info));
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_code = SEGV_MAPERR;
+ info.si_addr = (void __user *)ptr;
+
+ force_sig_info(SIGSEGV, &info, current);
+ return false;
+ } else {
+ return true;
+ }
+}
+
bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
{
struct task_struct *tsk;
unsigned long caller;
int vsyscall_nr;
+ int prev_sig_on_uaccess_error;
long ret;
/*
@@ -180,35 +209,65 @@
if (seccomp_mode(&tsk->seccomp))
do_exit(SIGKILL);
+ /*
+ * With a real vsyscall, page faults cause SIGSEGV. We want to
+ * preserve that behavior to make writing exploits harder.
+ */
+ prev_sig_on_uaccess_error = current_thread_info()->sig_on_uaccess_error;
+ current_thread_info()->sig_on_uaccess_error = 1;
+
+ /*
+ * 0 is a valid user pointer (in the access_ok sense) on 32-bit and
+ * 64-bit, so we don't need to special-case it here. For all the
+ * vsyscalls, 0 means "don't write anything" not "write it at
+ * address 0".
+ */
+ ret = -EFAULT;
switch (vsyscall_nr) {
case 0:
+ if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
+ !write_ok_or_segv(regs->si, sizeof(struct timezone)))
+ break;
+
ret = sys_gettimeofday(
(struct timeval __user *)regs->di,
(struct timezone __user *)regs->si);
break;
case 1:
+ if (!write_ok_or_segv(regs->di, sizeof(time_t)))
+ break;
+
ret = sys_time((time_t __user *)regs->di);
break;
case 2:
+ if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
+ !write_ok_or_segv(regs->si, sizeof(unsigned)))
+ break;
+
ret = sys_getcpu((unsigned __user *)regs->di,
(unsigned __user *)regs->si,
0);
break;
}
+ current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
+
if (ret == -EFAULT) {
- /*
- * Bad news -- userspace fed a bad pointer to a vsyscall.
- *
- * With a real vsyscall, that would have caused SIGSEGV.
- * To make writing reliable exploits using the emulated
- * vsyscalls harder, generate SIGSEGV here as well.
- */
+ /* Bad news -- userspace fed a bad pointer to a vsyscall. */
warn_bad_vsyscall(KERN_INFO, regs,
"vsyscall fault (exploit attempt?)");
- goto sigsegv;
+
+ /*
+ * If we failed to generate a signal for any reason,
+ * generate one here. (This should be impossible.)
+ */
+ if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) &&
+ !sigismember(&tsk->pending.signal, SIGSEGV)))
+ goto sigsegv;
+
+ return true; /* Don't emulate the ret. */
}
regs->ax = ret;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index c1d6cd5..91f83e2 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -92,6 +92,7 @@
struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
.setup_percpu_clockev = setup_secondary_APIC_clock,
+ .fixup_cpu_id = x86_default_fixup_cpu_id,
};
static void default_nmi_init(void) { };
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 76e3f1c..405f262 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -338,11 +338,15 @@
return HRTIMER_NORESTART;
}
-static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
+static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
{
+ struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
struct kvm_timer *pt = &ps->pit_timer;
s64 interval;
+ if (!irqchip_in_kernel(kvm))
+ return;
+
interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
pr_debug("create pit timer, interval is %llu nsec\n", interval);
@@ -394,13 +398,13 @@
/* FIXME: enhance mode 4 precision */
case 4:
if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)) {
- create_pit_timer(ps, val, 0);
+ create_pit_timer(kvm, val, 0);
}
break;
case 2:
case 3:
if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)){
- create_pit_timer(ps, val, 1);
+ create_pit_timer(kvm, val, 1);
}
break;
default:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c38efd7..4c938da 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -602,7 +602,6 @@
{
struct kvm_cpuid_entry2 *best;
struct kvm_lapic *apic = vcpu->arch.apic;
- u32 timer_mode_mask;
best = kvm_find_cpuid_entry(vcpu, 1, 0);
if (!best)
@@ -615,15 +614,12 @@
best->ecx |= bit(X86_FEATURE_OSXSAVE);
}
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- best->function == 0x1) {
- best->ecx |= bit(X86_FEATURE_TSC_DEADLINE_TIMER);
- timer_mode_mask = 3 << 17;
- } else
- timer_mode_mask = 1 << 17;
-
- if (apic)
- apic->lapic_timer.timer_mode_mask = timer_mode_mask;
+ if (apic) {
+ if (best->ecx & bit(X86_FEATURE_TSC_DEADLINE_TIMER))
+ apic->lapic_timer.timer_mode_mask = 3 << 17;
+ else
+ apic->lapic_timer.timer_mode_mask = 1 << 17;
+ }
}
int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
@@ -2135,6 +2131,9 @@
case KVM_CAP_TSC_CONTROL:
r = kvm_has_tsc_control;
break;
+ case KVM_CAP_TSC_DEADLINE_TIMER:
+ r = boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER);
+ break;
default:
r = 0;
break;
diff --git a/arch/x86/lib/inat.c b/arch/x86/lib/inat.c
index 46fc4ee..88ad5fb 100644
--- a/arch/x86/lib/inat.c
+++ b/arch/x86/lib/inat.c
@@ -82,9 +82,16 @@
const insn_attr_t *table;
if (vex_m > X86_VEX_M_MAX || vex_p > INAT_LSTPFX_MAX)
return 0;
- table = inat_avx_tables[vex_m][vex_p];
+ /* At first, this checks the master table */
+ table = inat_avx_tables[vex_m][0];
if (!table)
return 0;
+ if (!inat_is_group(table[opcode]) && vex_p) {
+ /* If this is not a group, get attribute directly */
+ table = inat_avx_tables[vex_m][vex_p];
+ if (!table)
+ return 0;
+ }
return table[opcode];
}
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index 374562e..5a1f9f3 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -202,7 +202,7 @@
m = insn_vex_m_bits(insn);
p = insn_vex_p_bits(insn);
insn->attr = inat_get_avx_attribute(op, m, p);
- if (!inat_accept_vex(insn->attr))
+ if (!inat_accept_vex(insn->attr) && !inat_is_group(insn->attr))
insn->attr = 0; /* This instruction is bad */
goto end; /* VEX has only 1 byte for opcode */
}
@@ -249,6 +249,8 @@
pfx = insn_last_prefix(insn);
insn->attr = inat_get_group_attribute(mod, pfx,
insn->attr);
+ if (insn_is_avx(insn) && !inat_accept_vex(insn->attr))
+ insn->attr = 0; /* This is bad */
}
}
diff --git a/arch/x86/lib/string_32.c b/arch/x86/lib/string_32.c
index 82004d2..bd59090 100644
--- a/arch/x86/lib/string_32.c
+++ b/arch/x86/lib/string_32.c
@@ -164,15 +164,13 @@
size_t strlen(const char *s)
{
int d0;
- int res;
+ size_t res;
asm volatile("repne\n\t"
- "scasb\n\t"
- "notl %0\n\t"
- "decl %0"
+ "scasb"
: "=c" (res), "=&D" (d0)
: "1" (s), "a" (0), "0" (0xffffffffu)
: "memory");
- return res;
+ return ~res - 1;
}
EXPORT_SYMBOL(strlen);
#endif
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index a793da5..5b83c51 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -1,5 +1,11 @@
# x86 Opcode Maps
#
+# This is (mostly) based on following documentations.
+# - Intel(R) 64 and IA-32 Architectures Software Developer's Manual Vol.2
+# (#325383-040US, October 2011)
+# - Intel(R) Advanced Vector Extensions Programming Reference
+# (#319433-011,JUNE 2011).
+#
#<Opcode maps>
# Table: table-name
# Referrer: escaped-name
@@ -15,10 +21,13 @@
# EndTable
#
# AVX Superscripts
-# (VEX): this opcode can accept VEX prefix.
-# (oVEX): this opcode requires VEX prefix.
-# (o128): this opcode only supports 128bit VEX.
-# (o256): this opcode only supports 256bit VEX.
+# (v): this opcode requires VEX prefix.
+# (v1): this opcode only supports 128bit VEX.
+#
+# Last Prefix Superscripts
+# - (66): the last prefix is 0x66
+# - (F3): the last prefix is 0xF3
+# - (F2): the last prefix is 0xF2
#
Table: one byte opcode
@@ -199,8 +208,8 @@
a1: MOV rAX,Ov
a2: MOV Ob,AL
a3: MOV Ov,rAX
-a4: MOVS/B Xb,Yb
-a5: MOVS/W/D/Q Xv,Yv
+a4: MOVS/B Yb,Xb
+a5: MOVS/W/D/Q Yv,Xv
a6: CMPS/B Xb,Yb
a7: CMPS/W/D Xv,Yv
a8: TEST AL,Ib
@@ -233,8 +242,8 @@
c1: Grp2 Ev,Ib (1A)
c2: RETN Iw (f64)
c3: RETN
-c4: LES Gz,Mp (i64) | 3bytes-VEX (Prefix)
-c5: LDS Gz,Mp (i64) | 2bytes-VEX (Prefix)
+c4: LES Gz,Mp (i64) | VEX+2byte (Prefix)
+c5: LDS Gz,Mp (i64) | VEX+1byte (Prefix)
c6: Grp11 Eb,Ib (1A)
c7: Grp11 Ev,Iz (1A)
c8: ENTER Iw,Ib
@@ -320,14 +329,19 @@
# 3DNow! uses the last imm byte as opcode extension.
0f: 3DNow! Pq,Qq,Ib
# 0x0f 0x10-0x1f
-10: movups Vps,Wps (VEX) | movss Vss,Wss (F3),(VEX),(o128) | movupd Vpd,Wpd (66),(VEX) | movsd Vsd,Wsd (F2),(VEX),(o128)
-11: movups Wps,Vps (VEX) | movss Wss,Vss (F3),(VEX),(o128) | movupd Wpd,Vpd (66),(VEX) | movsd Wsd,Vsd (F2),(VEX),(o128)
-12: movlps Vq,Mq (VEX),(o128) | movlpd Vq,Mq (66),(VEX),(o128) | movhlps Vq,Uq (VEX),(o128) | movddup Vq,Wq (F2),(VEX) | movsldup Vq,Wq (F3),(VEX)
-13: mpvlps Mq,Vq (VEX),(o128) | movlpd Mq,Vq (66),(VEX),(o128)
-14: unpcklps Vps,Wq (VEX) | unpcklpd Vpd,Wq (66),(VEX)
-15: unpckhps Vps,Wq (VEX) | unpckhpd Vpd,Wq (66),(VEX)
-16: movhps Vq,Mq (VEX),(o128) | movhpd Vq,Mq (66),(VEX),(o128) | movlsps Vq,Uq (VEX),(o128) | movshdup Vq,Wq (F3),(VEX)
-17: movhps Mq,Vq (VEX),(o128) | movhpd Mq,Vq (66),(VEX),(o128)
+# NOTE: According to Intel SDM opcode map, vmovups and vmovupd has no operands
+# but it actually has operands. And also, vmovss and vmovsd only accept 128bit.
+# MOVSS/MOVSD has too many forms(3) on SDM. This map just shows a typical form.
+# Many AVX instructions lack v1 superscript, according to Intel AVX-Prgramming
+# Reference A.1
+10: vmovups Vps,Wps | vmovupd Vpd,Wpd (66) | vmovss Vx,Hx,Wss (F3),(v1) | vmovsd Vx,Hx,Wsd (F2),(v1)
+11: vmovups Wps,Vps | vmovupd Wpd,Vpd (66) | vmovss Wss,Hx,Vss (F3),(v1) | vmovsd Wsd,Hx,Vsd (F2),(v1)
+12: vmovlps Vq,Hq,Mq (v1) | vmovhlps Vq,Hq,Uq (v1) | vmovlpd Vq,Hq,Mq (66),(v1) | vmovsldup Vx,Wx (F3) | vmovddup Vx,Wx (F2)
+13: vmovlps Mq,Vq (v1) | vmovlpd Mq,Vq (66),(v1)
+14: vunpcklps Vx,Hx,Wx | vunpcklpd Vx,Hx,Wx (66)
+15: vunpckhps Vx,Hx,Wx | vunpckhpd Vx,Hx,Wx (66)
+16: vmovhps Vdq,Hq,Mq (v1) | vmovlhps Vdq,Hq,Uq (v1) | vmovhpd Vdq,Hq,Mq (66),(v1) | vmovshdup Vx,Wx (F3)
+17: vmovhps Mq,Vq (v1) | vmovhpd Mq,Vq (66),(v1)
18: Grp16 (1A)
19:
1a:
@@ -345,14 +359,14 @@
25:
26:
27:
-28: movaps Vps,Wps (VEX) | movapd Vpd,Wpd (66),(VEX)
-29: movaps Wps,Vps (VEX) | movapd Wpd,Vpd (66),(VEX)
-2a: cvtpi2ps Vps,Qpi | cvtsi2ss Vss,Ed/q (F3),(VEX),(o128) | cvtpi2pd Vpd,Qpi (66) | cvtsi2sd Vsd,Ed/q (F2),(VEX),(o128)
-2b: movntps Mps,Vps (VEX) | movntpd Mpd,Vpd (66),(VEX)
-2c: cvttps2pi Ppi,Wps | cvttss2si Gd/q,Wss (F3),(VEX),(o128) | cvttpd2pi Ppi,Wpd (66) | cvttsd2si Gd/q,Wsd (F2),(VEX),(o128)
-2d: cvtps2pi Ppi,Wps | cvtss2si Gd/q,Wss (F3),(VEX),(o128) | cvtpd2pi Qpi,Wpd (66) | cvtsd2si Gd/q,Wsd (F2),(VEX),(o128)
-2e: ucomiss Vss,Wss (VEX),(o128) | ucomisd Vsd,Wsd (66),(VEX),(o128)
-2f: comiss Vss,Wss (VEX),(o128) | comisd Vsd,Wsd (66),(VEX),(o128)
+28: vmovaps Vps,Wps | vmovapd Vpd,Wpd (66)
+29: vmovaps Wps,Vps | vmovapd Wpd,Vpd (66)
+2a: cvtpi2ps Vps,Qpi | cvtpi2pd Vpd,Qpi (66) | vcvtsi2ss Vss,Hss,Ey (F3),(v1) | vcvtsi2sd Vsd,Hsd,Ey (F2),(v1)
+2b: vmovntps Mps,Vps | vmovntpd Mpd,Vpd (66)
+2c: cvttps2pi Ppi,Wps | cvttpd2pi Ppi,Wpd (66) | vcvttss2si Gy,Wss (F3),(v1) | vcvttsd2si Gy,Wsd (F2),(v1)
+2d: cvtps2pi Ppi,Wps | cvtpd2pi Qpi,Wpd (66) | vcvtss2si Gy,Wss (F3),(v1) | vcvtsd2si Gy,Wsd (F2),(v1)
+2e: vucomiss Vss,Wss (v1) | vucomisd Vsd,Wsd (66),(v1)
+2f: vcomiss Vss,Wss (v1) | vcomisd Vsd,Wsd (66),(v1)
# 0x0f 0x30-0x3f
30: WRMSR
31: RDTSC
@@ -388,65 +402,66 @@
4e: CMOVLE/NG Gv,Ev
4f: CMOVNLE/G Gv,Ev
# 0x0f 0x50-0x5f
-50: movmskps Gd/q,Ups (VEX) | movmskpd Gd/q,Upd (66),(VEX)
-51: sqrtps Vps,Wps (VEX) | sqrtss Vss,Wss (F3),(VEX),(o128) | sqrtpd Vpd,Wpd (66),(VEX) | sqrtsd Vsd,Wsd (F2),(VEX),(o128)
-52: rsqrtps Vps,Wps (VEX) | rsqrtss Vss,Wss (F3),(VEX),(o128)
-53: rcpps Vps,Wps (VEX) | rcpss Vss,Wss (F3),(VEX),(o128)
-54: andps Vps,Wps (VEX) | andpd Vpd,Wpd (66),(VEX)
-55: andnps Vps,Wps (VEX) | andnpd Vpd,Wpd (66),(VEX)
-56: orps Vps,Wps (VEX) | orpd Vpd,Wpd (66),(VEX)
-57: xorps Vps,Wps (VEX) | xorpd Vpd,Wpd (66),(VEX)
-58: addps Vps,Wps (VEX) | addss Vss,Wss (F3),(VEX),(o128) | addpd Vpd,Wpd (66),(VEX) | addsd Vsd,Wsd (F2),(VEX),(o128)
-59: mulps Vps,Wps (VEX) | mulss Vss,Wss (F3),(VEX),(o128) | mulpd Vpd,Wpd (66),(VEX) | mulsd Vsd,Wsd (F2),(VEX),(o128)
-5a: cvtps2pd Vpd,Wps (VEX) | cvtss2sd Vsd,Wss (F3),(VEX),(o128) | cvtpd2ps Vps,Wpd (66),(VEX) | cvtsd2ss Vsd,Wsd (F2),(VEX),(o128)
-5b: cvtdq2ps Vps,Wdq (VEX) | cvtps2dq Vdq,Wps (66),(VEX) | cvttps2dq Vdq,Wps (F3),(VEX)
-5c: subps Vps,Wps (VEX) | subss Vss,Wss (F3),(VEX),(o128) | subpd Vpd,Wpd (66),(VEX) | subsd Vsd,Wsd (F2),(VEX),(o128)
-5d: minps Vps,Wps (VEX) | minss Vss,Wss (F3),(VEX),(o128) | minpd Vpd,Wpd (66),(VEX) | minsd Vsd,Wsd (F2),(VEX),(o128)
-5e: divps Vps,Wps (VEX) | divss Vss,Wss (F3),(VEX),(o128) | divpd Vpd,Wpd (66),(VEX) | divsd Vsd,Wsd (F2),(VEX),(o128)
-5f: maxps Vps,Wps (VEX) | maxss Vss,Wss (F3),(VEX),(o128) | maxpd Vpd,Wpd (66),(VEX) | maxsd Vsd,Wsd (F2),(VEX),(o128)
+50: vmovmskps Gy,Ups | vmovmskpd Gy,Upd (66)
+51: vsqrtps Vps,Wps | vsqrtpd Vpd,Wpd (66) | vsqrtss Vss,Hss,Wss (F3),(v1) | vsqrtsd Vsd,Hsd,Wsd (F2),(v1)
+52: vrsqrtps Vps,Wps | vrsqrtss Vss,Hss,Wss (F3),(v1)
+53: vrcpps Vps,Wps | vrcpss Vss,Hss,Wss (F3),(v1)
+54: vandps Vps,Hps,Wps | vandpd Vpd,Hpd,Wpd (66)
+55: vandnps Vps,Hps,Wps | vandnpd Vpd,Hpd,Wpd (66)
+56: vorps Vps,Hps,Wps | vorpd Vpd,Hpd,Wpd (66)
+57: vxorps Vps,Hps,Wps | vxorpd Vpd,Hpd,Wpd (66)
+58: vaddps Vps,Hps,Wps | vaddpd Vpd,Hpd,Wpd (66) | vaddss Vss,Hss,Wss (F3),(v1) | vaddsd Vsd,Hsd,Wsd (F2),(v1)
+59: vmulps Vps,Hps,Wps | vmulpd Vpd,Hpd,Wpd (66) | vmulss Vss,Hss,Wss (F3),(v1) | vmulsd Vsd,Hsd,Wsd (F2),(v1)
+5a: vcvtps2pd Vpd,Wps | vcvtpd2ps Vps,Wpd (66) | vcvtss2sd Vsd,Hx,Wss (F3),(v1) | vcvtsd2ss Vss,Hx,Wsd (F2),(v1)
+5b: vcvtdq2ps Vps,Wdq | vcvtps2dq Vdq,Wps (66) | vcvttps2dq Vdq,Wps (F3)
+5c: vsubps Vps,Hps,Wps | vsubpd Vpd,Hpd,Wpd (66) | vsubss Vss,Hss,Wss (F3),(v1) | vsubsd Vsd,Hsd,Wsd (F2),(v1)
+5d: vminps Vps,Hps,Wps | vminpd Vpd,Hpd,Wpd (66) | vminss Vss,Hss,Wss (F3),(v1) | vminsd Vsd,Hsd,Wsd (F2),(v1)
+5e: vdivps Vps,Hps,Wps | vdivpd Vpd,Hpd,Wpd (66) | vdivss Vss,Hss,Wss (F3),(v1) | vdivsd Vsd,Hsd,Wsd (F2),(v1)
+5f: vmaxps Vps,Hps,Wps | vmaxpd Vpd,Hpd,Wpd (66) | vmaxss Vss,Hss,Wss (F3),(v1) | vmaxsd Vsd,Hsd,Wsd (F2),(v1)
# 0x0f 0x60-0x6f
-60: punpcklbw Pq,Qd | punpcklbw Vdq,Wdq (66),(VEX),(o128)
-61: punpcklwd Pq,Qd | punpcklwd Vdq,Wdq (66),(VEX),(o128)
-62: punpckldq Pq,Qd | punpckldq Vdq,Wdq (66),(VEX),(o128)
-63: packsswb Pq,Qq | packsswb Vdq,Wdq (66),(VEX),(o128)
-64: pcmpgtb Pq,Qq | pcmpgtb Vdq,Wdq (66),(VEX),(o128)
-65: pcmpgtw Pq,Qq | pcmpgtw Vdq,Wdq (66),(VEX),(o128)
-66: pcmpgtd Pq,Qq | pcmpgtd Vdq,Wdq (66),(VEX),(o128)
-67: packuswb Pq,Qq | packuswb Vdq,Wdq (66),(VEX),(o128)
-68: punpckhbw Pq,Qd | punpckhbw Vdq,Wdq (66),(VEX),(o128)
-69: punpckhwd Pq,Qd | punpckhwd Vdq,Wdq (66),(VEX),(o128)
-6a: punpckhdq Pq,Qd | punpckhdq Vdq,Wdq (66),(VEX),(o128)
-6b: packssdw Pq,Qd | packssdw Vdq,Wdq (66),(VEX),(o128)
-6c: punpcklqdq Vdq,Wdq (66),(VEX),(o128)
-6d: punpckhqdq Vdq,Wdq (66),(VEX),(o128)
-6e: movd/q/ Pd,Ed/q | movd/q Vdq,Ed/q (66),(VEX),(o128)
-6f: movq Pq,Qq | movdqa Vdq,Wdq (66),(VEX) | movdqu Vdq,Wdq (F3),(VEX)
+60: punpcklbw Pq,Qd | vpunpcklbw Vx,Hx,Wx (66),(v1)
+61: punpcklwd Pq,Qd | vpunpcklwd Vx,Hx,Wx (66),(v1)
+62: punpckldq Pq,Qd | vpunpckldq Vx,Hx,Wx (66),(v1)
+63: packsswb Pq,Qq | vpacksswb Vx,Hx,Wx (66),(v1)
+64: pcmpgtb Pq,Qq | vpcmpgtb Vx,Hx,Wx (66),(v1)
+65: pcmpgtw Pq,Qq | vpcmpgtw Vx,Hx,Wx (66),(v1)
+66: pcmpgtd Pq,Qq | vpcmpgtd Vx,Hx,Wx (66),(v1)
+67: packuswb Pq,Qq | vpackuswb Vx,Hx,Wx (66),(v1)
+68: punpckhbw Pq,Qd | vpunpckhbw Vx,Hx,Wx (66),(v1)
+69: punpckhwd Pq,Qd | vpunpckhwd Vx,Hx,Wx (66),(v1)
+6a: punpckhdq Pq,Qd | vpunpckhdq Vx,Hx,Wx (66),(v1)
+6b: packssdw Pq,Qd | vpackssdw Vx,Hx,Wx (66),(v1)
+6c: vpunpcklqdq Vx,Hx,Wx (66),(v1)
+6d: vpunpckhqdq Vx,Hx,Wx (66),(v1)
+6e: movd/q Pd,Ey | vmovd/q Vy,Ey (66),(v1)
+6f: movq Pq,Qq | vmovdqa Vx,Wx (66) | vmovdqu Vx,Wx (F3)
# 0x0f 0x70-0x7f
-70: pshufw Pq,Qq,Ib | pshufd Vdq,Wdq,Ib (66),(VEX),(o128) | pshufhw Vdq,Wdq,Ib (F3),(VEX),(o128) | pshuflw VdqWdq,Ib (F2),(VEX),(o128)
+70: pshufw Pq,Qq,Ib | vpshufd Vx,Wx,Ib (66),(v1) | vpshufhw Vx,Wx,Ib (F3),(v1) | vpshuflw Vx,Wx,Ib (F2),(v1)
71: Grp12 (1A)
72: Grp13 (1A)
73: Grp14 (1A)
-74: pcmpeqb Pq,Qq | pcmpeqb Vdq,Wdq (66),(VEX),(o128)
-75: pcmpeqw Pq,Qq | pcmpeqw Vdq,Wdq (66),(VEX),(o128)
-76: pcmpeqd Pq,Qq | pcmpeqd Vdq,Wdq (66),(VEX),(o128)
-77: emms/vzeroupper/vzeroall (VEX)
-78: VMREAD Ed/q,Gd/q
-79: VMWRITE Gd/q,Ed/q
+74: pcmpeqb Pq,Qq | vpcmpeqb Vx,Hx,Wx (66),(v1)
+75: pcmpeqw Pq,Qq | vpcmpeqw Vx,Hx,Wx (66),(v1)
+76: pcmpeqd Pq,Qq | vpcmpeqd Vx,Hx,Wx (66),(v1)
+# Note: Remove (v), because vzeroall and vzeroupper becomes emms without VEX.
+77: emms | vzeroupper | vzeroall
+78: VMREAD Ey,Gy
+79: VMWRITE Gy,Ey
7a:
7b:
-7c: haddps Vps,Wps (F2),(VEX) | haddpd Vpd,Wpd (66),(VEX)
-7d: hsubps Vps,Wps (F2),(VEX) | hsubpd Vpd,Wpd (66),(VEX)
-7e: movd/q Ed/q,Pd | movd/q Ed/q,Vdq (66),(VEX),(o128) | movq Vq,Wq (F3),(VEX),(o128)
-7f: movq Qq,Pq | movdqa Wdq,Vdq (66),(VEX) | movdqu Wdq,Vdq (F3),(VEX)
+7c: vhaddpd Vpd,Hpd,Wpd (66) | vhaddps Vps,Hps,Wps (F2)
+7d: vhsubpd Vpd,Hpd,Wpd (66) | vhsubps Vps,Hps,Wps (F2)
+7e: movd/q Ey,Pd | vmovd/q Ey,Vy (66),(v1) | vmovq Vq,Wq (F3),(v1)
+7f: movq Qq,Pq | vmovdqa Wx,Vx (66) | vmovdqu Wx,Vx (F3)
# 0x0f 0x80-0x8f
80: JO Jz (f64)
81: JNO Jz (f64)
-82: JB/JNAE/JC Jz (f64)
-83: JNB/JAE/JNC Jz (f64)
-84: JZ/JE Jz (f64)
-85: JNZ/JNE Jz (f64)
+82: JB/JC/JNAE Jz (f64)
+83: JAE/JNB/JNC Jz (f64)
+84: JE/JZ Jz (f64)
+85: JNE/JNZ Jz (f64)
86: JBE/JNA Jz (f64)
-87: JNBE/JA Jz (f64)
+87: JA/JNBE Jz (f64)
88: JS Jz (f64)
89: JNS Jz (f64)
8a: JP/JPE Jz (f64)
@@ -502,18 +517,18 @@
b9: Grp10 (1A)
ba: Grp8 Ev,Ib (1A)
bb: BTC Ev,Gv
-bc: BSF Gv,Ev
-bd: BSR Gv,Ev
+bc: BSF Gv,Ev | TZCNT Gv,Ev (F3)
+bd: BSR Gv,Ev | LZCNT Gv,Ev (F3)
be: MOVSX Gv,Eb
bf: MOVSX Gv,Ew
# 0x0f 0xc0-0xcf
c0: XADD Eb,Gb
c1: XADD Ev,Gv
-c2: cmpps Vps,Wps,Ib (VEX) | cmpss Vss,Wss,Ib (F3),(VEX),(o128) | cmppd Vpd,Wpd,Ib (66),(VEX) | cmpsd Vsd,Wsd,Ib (F2),(VEX)
-c3: movnti Md/q,Gd/q
-c4: pinsrw Pq,Rd/q/Mw,Ib | pinsrw Vdq,Rd/q/Mw,Ib (66),(VEX),(o128)
-c5: pextrw Gd,Nq,Ib | pextrw Gd,Udq,Ib (66),(VEX),(o128)
-c6: shufps Vps,Wps,Ib (VEX) | shufpd Vpd,Wpd,Ib (66),(VEX)
+c2: vcmpps Vps,Hps,Wps,Ib | vcmppd Vpd,Hpd,Wpd,Ib (66) | vcmpss Vss,Hss,Wss,Ib (F3),(v1) | vcmpsd Vsd,Hsd,Wsd,Ib (F2),(v1)
+c3: movnti My,Gy
+c4: pinsrw Pq,Ry/Mw,Ib | vpinsrw Vdq,Hdq,Ry/Mw,Ib (66),(v1)
+c5: pextrw Gd,Nq,Ib | vpextrw Gd,Udq,Ib (66),(v1)
+c6: vshufps Vps,Hps,Wps,Ib | vshufpd Vpd,Hpd,Wpd,Ib (66)
c7: Grp9 (1A)
c8: BSWAP RAX/EAX/R8/R8D
c9: BSWAP RCX/ECX/R9/R9D
@@ -524,55 +539,55 @@
ce: BSWAP RSI/ESI/R14/R14D
cf: BSWAP RDI/EDI/R15/R15D
# 0x0f 0xd0-0xdf
-d0: addsubps Vps,Wps (F2),(VEX) | addsubpd Vpd,Wpd (66),(VEX)
-d1: psrlw Pq,Qq | psrlw Vdq,Wdq (66),(VEX),(o128)
-d2: psrld Pq,Qq | psrld Vdq,Wdq (66),(VEX),(o128)
-d3: psrlq Pq,Qq | psrlq Vdq,Wdq (66),(VEX),(o128)
-d4: paddq Pq,Qq | paddq Vdq,Wdq (66),(VEX),(o128)
-d5: pmullw Pq,Qq | pmullw Vdq,Wdq (66),(VEX),(o128)
-d6: movq Wq,Vq (66),(VEX),(o128) | movq2dq Vdq,Nq (F3) | movdq2q Pq,Uq (F2)
-d7: pmovmskb Gd,Nq | pmovmskb Gd,Udq (66),(VEX),(o128)
-d8: psubusb Pq,Qq | psubusb Vdq,Wdq (66),(VEX),(o128)
-d9: psubusw Pq,Qq | psubusw Vdq,Wdq (66),(VEX),(o128)
-da: pminub Pq,Qq | pminub Vdq,Wdq (66),(VEX),(o128)
-db: pand Pq,Qq | pand Vdq,Wdq (66),(VEX),(o128)
-dc: paddusb Pq,Qq | paddusb Vdq,Wdq (66),(VEX),(o128)
-dd: paddusw Pq,Qq | paddusw Vdq,Wdq (66),(VEX),(o128)
-de: pmaxub Pq,Qq | pmaxub Vdq,Wdq (66),(VEX),(o128)
-df: pandn Pq,Qq | pandn Vdq,Wdq (66),(VEX),(o128)
+d0: vaddsubpd Vpd,Hpd,Wpd (66) | vaddsubps Vps,Hps,Wps (F2)
+d1: psrlw Pq,Qq | vpsrlw Vx,Hx,Wx (66),(v1)
+d2: psrld Pq,Qq | vpsrld Vx,Hx,Wx (66),(v1)
+d3: psrlq Pq,Qq | vpsrlq Vx,Hx,Wx (66),(v1)
+d4: paddq Pq,Qq | vpaddq Vx,Hx,Wx (66),(v1)
+d5: pmullw Pq,Qq | vpmullw Vx,Hx,Wx (66),(v1)
+d6: vmovq Wq,Vq (66),(v1) | movq2dq Vdq,Nq (F3) | movdq2q Pq,Uq (F2)
+d7: pmovmskb Gd,Nq | vpmovmskb Gd,Ux (66),(v1)
+d8: psubusb Pq,Qq | vpsubusb Vx,Hx,Wx (66),(v1)
+d9: psubusw Pq,Qq | vpsubusw Vx,Hx,Wx (66),(v1)
+da: pminub Pq,Qq | vpminub Vx,Hx,Wx (66),(v1)
+db: pand Pq,Qq | vpand Vx,Hx,Wx (66),(v1)
+dc: paddusb Pq,Qq | vpaddusb Vx,Hx,Wx (66),(v1)
+dd: paddusw Pq,Qq | vpaddusw Vx,Hx,Wx (66),(v1)
+de: pmaxub Pq,Qq | vpmaxub Vx,Hx,Wx (66),(v1)
+df: pandn Pq,Qq | vpandn Vx,Hx,Wx (66),(v1)
# 0x0f 0xe0-0xef
-e0: pavgb Pq,Qq | pavgb Vdq,Wdq (66),(VEX),(o128)
-e1: psraw Pq,Qq | psraw Vdq,Wdq (66),(VEX),(o128)
-e2: psrad Pq,Qq | psrad Vdq,Wdq (66),(VEX),(o128)
-e3: pavgw Pq,Qq | pavgw Vdq,Wdq (66),(VEX),(o128)
-e4: pmulhuw Pq,Qq | pmulhuw Vdq,Wdq (66),(VEX),(o128)
-e5: pmulhw Pq,Qq | pmulhw Vdq,Wdq (66),(VEX),(o128)
-e6: cvtpd2dq Vdq,Wpd (F2),(VEX) | cvttpd2dq Vdq,Wpd (66),(VEX) | cvtdq2pd Vpd,Wdq (F3),(VEX)
-e7: movntq Mq,Pq | movntdq Mdq,Vdq (66),(VEX)
-e8: psubsb Pq,Qq | psubsb Vdq,Wdq (66),(VEX),(o128)
-e9: psubsw Pq,Qq | psubsw Vdq,Wdq (66),(VEX),(o128)
-ea: pminsw Pq,Qq | pminsw Vdq,Wdq (66),(VEX),(o128)
-eb: por Pq,Qq | por Vdq,Wdq (66),(VEX),(o128)
-ec: paddsb Pq,Qq | paddsb Vdq,Wdq (66),(VEX),(o128)
-ed: paddsw Pq,Qq | paddsw Vdq,Wdq (66),(VEX),(o128)
-ee: pmaxsw Pq,Qq | pmaxsw Vdq,Wdq (66),(VEX),(o128)
-ef: pxor Pq,Qq | pxor Vdq,Wdq (66),(VEX),(o128)
+e0: pavgb Pq,Qq | vpavgb Vx,Hx,Wx (66),(v1)
+e1: psraw Pq,Qq | vpsraw Vx,Hx,Wx (66),(v1)
+e2: psrad Pq,Qq | vpsrad Vx,Hx,Wx (66),(v1)
+e3: pavgw Pq,Qq | vpavgw Vx,Hx,Wx (66),(v1)
+e4: pmulhuw Pq,Qq | vpmulhuw Vx,Hx,Wx (66),(v1)
+e5: pmulhw Pq,Qq | vpmulhw Vx,Hx,Wx (66),(v1)
+e6: vcvttpd2dq Vx,Wpd (66) | vcvtdq2pd Vx,Wdq (F3) | vcvtpd2dq Vx,Wpd (F2)
+e7: movntq Mq,Pq | vmovntdq Mx,Vx (66)
+e8: psubsb Pq,Qq | vpsubsb Vx,Hx,Wx (66),(v1)
+e9: psubsw Pq,Qq | vpsubsw Vx,Hx,Wx (66),(v1)
+ea: pminsw Pq,Qq | vpminsw Vx,Hx,Wx (66),(v1)
+eb: por Pq,Qq | vpor Vx,Hx,Wx (66),(v1)
+ec: paddsb Pq,Qq | vpaddsb Vx,Hx,Wx (66),(v1)
+ed: paddsw Pq,Qq | vpaddsw Vx,Hx,Wx (66),(v1)
+ee: pmaxsw Pq,Qq | vpmaxsw Vx,Hx,Wx (66),(v1)
+ef: pxor Pq,Qq | vpxor Vx,Hx,Wx (66),(v1)
# 0x0f 0xf0-0xff
-f0: lddqu Vdq,Mdq (F2),(VEX)
-f1: psllw Pq,Qq | psllw Vdq,Wdq (66),(VEX),(o128)
-f2: pslld Pq,Qq | pslld Vdq,Wdq (66),(VEX),(o128)
-f3: psllq Pq,Qq | psllq Vdq,Wdq (66),(VEX),(o128)
-f4: pmuludq Pq,Qq | pmuludq Vdq,Wdq (66),(VEX),(o128)
-f5: pmaddwd Pq,Qq | pmaddwd Vdq,Wdq (66),(VEX),(o128)
-f6: psadbw Pq,Qq | psadbw Vdq,Wdq (66),(VEX),(o128)
-f7: maskmovq Pq,Nq | maskmovdqu Vdq,Udq (66),(VEX),(o128)
-f8: psubb Pq,Qq | psubb Vdq,Wdq (66),(VEX),(o128)
-f9: psubw Pq,Qq | psubw Vdq,Wdq (66),(VEX),(o128)
-fa: psubd Pq,Qq | psubd Vdq,Wdq (66),(VEX),(o128)
-fb: psubq Pq,Qq | psubq Vdq,Wdq (66),(VEX),(o128)
-fc: paddb Pq,Qq | paddb Vdq,Wdq (66),(VEX),(o128)
-fd: paddw Pq,Qq | paddw Vdq,Wdq (66),(VEX),(o128)
-fe: paddd Pq,Qq | paddd Vdq,Wdq (66),(VEX),(o128)
+f0: vlddqu Vx,Mx (F2)
+f1: psllw Pq,Qq | vpsllw Vx,Hx,Wx (66),(v1)
+f2: pslld Pq,Qq | vpslld Vx,Hx,Wx (66),(v1)
+f3: psllq Pq,Qq | vpsllq Vx,Hx,Wx (66),(v1)
+f4: pmuludq Pq,Qq | vpmuludq Vx,Hx,Wx (66),(v1)
+f5: pmaddwd Pq,Qq | vpmaddwd Vx,Hx,Wx (66),(v1)
+f6: psadbw Pq,Qq | vpsadbw Vx,Hx,Wx (66),(v1)
+f7: maskmovq Pq,Nq | vmaskmovdqu Vx,Ux (66),(v1)
+f8: psubb Pq,Qq | vpsubb Vx,Hx,Wx (66),(v1)
+f9: psubw Pq,Qq | vpsubw Vx,Hx,Wx (66),(v1)
+fa: psubd Pq,Qq | vpsubd Vx,Hx,Wx (66),(v1)
+fb: psubq Pq,Qq | vpsubq Vx,Hx,Wx (66),(v1)
+fc: paddb Pq,Qq | vpaddb Vx,Hx,Wx (66),(v1)
+fd: paddw Pq,Qq | vpaddw Vx,Hx,Wx (66),(v1)
+fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
ff:
EndTable
@@ -580,155 +595,193 @@
Referrer: 3-byte escape 1
AVXcode: 2
# 0x0f 0x38 0x00-0x0f
-00: pshufb Pq,Qq | pshufb Vdq,Wdq (66),(VEX),(o128)
-01: phaddw Pq,Qq | phaddw Vdq,Wdq (66),(VEX),(o128)
-02: phaddd Pq,Qq | phaddd Vdq,Wdq (66),(VEX),(o128)
-03: phaddsw Pq,Qq | phaddsw Vdq,Wdq (66),(VEX),(o128)
-04: pmaddubsw Pq,Qq | pmaddubsw Vdq,Wdq (66),(VEX),(o128)
-05: phsubw Pq,Qq | phsubw Vdq,Wdq (66),(VEX),(o128)
-06: phsubd Pq,Qq | phsubd Vdq,Wdq (66),(VEX),(o128)
-07: phsubsw Pq,Qq | phsubsw Vdq,Wdq (66),(VEX),(o128)
-08: psignb Pq,Qq | psignb Vdq,Wdq (66),(VEX),(o128)
-09: psignw Pq,Qq | psignw Vdq,Wdq (66),(VEX),(o128)
-0a: psignd Pq,Qq | psignd Vdq,Wdq (66),(VEX),(o128)
-0b: pmulhrsw Pq,Qq | pmulhrsw Vdq,Wdq (66),(VEX),(o128)
-0c: Vpermilps /r (66),(oVEX)
-0d: Vpermilpd /r (66),(oVEX)
-0e: vtestps /r (66),(oVEX)
-0f: vtestpd /r (66),(oVEX)
+00: pshufb Pq,Qq | vpshufb Vx,Hx,Wx (66),(v1)
+01: phaddw Pq,Qq | vphaddw Vx,Hx,Wx (66),(v1)
+02: phaddd Pq,Qq | vphaddd Vx,Hx,Wx (66),(v1)
+03: phaddsw Pq,Qq | vphaddsw Vx,Hx,Wx (66),(v1)
+04: pmaddubsw Pq,Qq | vpmaddubsw Vx,Hx,Wx (66),(v1)
+05: phsubw Pq,Qq | vphsubw Vx,Hx,Wx (66),(v1)
+06: phsubd Pq,Qq | vphsubd Vx,Hx,Wx (66),(v1)
+07: phsubsw Pq,Qq | vphsubsw Vx,Hx,Wx (66),(v1)
+08: psignb Pq,Qq | vpsignb Vx,Hx,Wx (66),(v1)
+09: psignw Pq,Qq | vpsignw Vx,Hx,Wx (66),(v1)
+0a: psignd Pq,Qq | vpsignd Vx,Hx,Wx (66),(v1)
+0b: pmulhrsw Pq,Qq | vpmulhrsw Vx,Hx,Wx (66),(v1)
+0c: vpermilps Vx,Hx,Wx (66),(v)
+0d: vpermilpd Vx,Hx,Wx (66),(v)
+0e: vtestps Vx,Wx (66),(v)
+0f: vtestpd Vx,Wx (66),(v)
# 0x0f 0x38 0x10-0x1f
10: pblendvb Vdq,Wdq (66)
11:
12:
-13:
+13: vcvtph2ps Vx,Wx,Ib (66),(v)
14: blendvps Vdq,Wdq (66)
15: blendvpd Vdq,Wdq (66)
-16:
-17: ptest Vdq,Wdq (66),(VEX)
-18: vbroadcastss /r (66),(oVEX)
-19: vbroadcastsd /r (66),(oVEX),(o256)
-1a: vbroadcastf128 /r (66),(oVEX),(o256)
+16: vpermps Vqq,Hqq,Wqq (66),(v)
+17: vptest Vx,Wx (66)
+18: vbroadcastss Vx,Wd (66),(v)
+19: vbroadcastsd Vqq,Wq (66),(v)
+1a: vbroadcastf128 Vqq,Mdq (66),(v)
1b:
-1c: pabsb Pq,Qq | pabsb Vdq,Wdq (66),(VEX),(o128)
-1d: pabsw Pq,Qq | pabsw Vdq,Wdq (66),(VEX),(o128)
-1e: pabsd Pq,Qq | pabsd Vdq,Wdq (66),(VEX),(o128)
+1c: pabsb Pq,Qq | vpabsb Vx,Wx (66),(v1)
+1d: pabsw Pq,Qq | vpabsw Vx,Wx (66),(v1)
+1e: pabsd Pq,Qq | vpabsd Vx,Wx (66),(v1)
1f:
# 0x0f 0x38 0x20-0x2f
-20: pmovsxbw Vdq,Udq/Mq (66),(VEX),(o128)
-21: pmovsxbd Vdq,Udq/Md (66),(VEX),(o128)
-22: pmovsxbq Vdq,Udq/Mw (66),(VEX),(o128)
-23: pmovsxwd Vdq,Udq/Mq (66),(VEX),(o128)
-24: pmovsxwq Vdq,Udq/Md (66),(VEX),(o128)
-25: pmovsxdq Vdq,Udq/Mq (66),(VEX),(o128)
+20: vpmovsxbw Vx,Ux/Mq (66),(v1)
+21: vpmovsxbd Vx,Ux/Md (66),(v1)
+22: vpmovsxbq Vx,Ux/Mw (66),(v1)
+23: vpmovsxwd Vx,Ux/Mq (66),(v1)
+24: vpmovsxwq Vx,Ux/Md (66),(v1)
+25: vpmovsxdq Vx,Ux/Mq (66),(v1)
26:
27:
-28: pmuldq Vdq,Wdq (66),(VEX),(o128)
-29: pcmpeqq Vdq,Wdq (66),(VEX),(o128)
-2a: movntdqa Vdq,Mdq (66),(VEX),(o128)
-2b: packusdw Vdq,Wdq (66),(VEX),(o128)
-2c: vmaskmovps(ld) /r (66),(oVEX)
-2d: vmaskmovpd(ld) /r (66),(oVEX)
-2e: vmaskmovps(st) /r (66),(oVEX)
-2f: vmaskmovpd(st) /r (66),(oVEX)
+28: vpmuldq Vx,Hx,Wx (66),(v1)
+29: vpcmpeqq Vx,Hx,Wx (66),(v1)
+2a: vmovntdqa Vx,Mx (66),(v1)
+2b: vpackusdw Vx,Hx,Wx (66),(v1)
+2c: vmaskmovps Vx,Hx,Mx (66),(v)
+2d: vmaskmovpd Vx,Hx,Mx (66),(v)
+2e: vmaskmovps Mx,Hx,Vx (66),(v)
+2f: vmaskmovpd Mx,Hx,Vx (66),(v)
# 0x0f 0x38 0x30-0x3f
-30: pmovzxbw Vdq,Udq/Mq (66),(VEX),(o128)
-31: pmovzxbd Vdq,Udq/Md (66),(VEX),(o128)
-32: pmovzxbq Vdq,Udq/Mw (66),(VEX),(o128)
-33: pmovzxwd Vdq,Udq/Mq (66),(VEX),(o128)
-34: pmovzxwq Vdq,Udq/Md (66),(VEX),(o128)
-35: pmovzxdq Vdq,Udq/Mq (66),(VEX),(o128)
-36:
-37: pcmpgtq Vdq,Wdq (66),(VEX),(o128)
-38: pminsb Vdq,Wdq (66),(VEX),(o128)
-39: pminsd Vdq,Wdq (66),(VEX),(o128)
-3a: pminuw Vdq,Wdq (66),(VEX),(o128)
-3b: pminud Vdq,Wdq (66),(VEX),(o128)
-3c: pmaxsb Vdq,Wdq (66),(VEX),(o128)
-3d: pmaxsd Vdq,Wdq (66),(VEX),(o128)
-3e: pmaxuw Vdq,Wdq (66),(VEX),(o128)
-3f: pmaxud Vdq,Wdq (66),(VEX),(o128)
+30: vpmovzxbw Vx,Ux/Mq (66),(v1)
+31: vpmovzxbd Vx,Ux/Md (66),(v1)
+32: vpmovzxbq Vx,Ux/Mw (66),(v1)
+33: vpmovzxwd Vx,Ux/Mq (66),(v1)
+34: vpmovzxwq Vx,Ux/Md (66),(v1)
+35: vpmovzxdq Vx,Ux/Mq (66),(v1)
+36: vpermd Vqq,Hqq,Wqq (66),(v)
+37: vpcmpgtq Vx,Hx,Wx (66),(v1)
+38: vpminsb Vx,Hx,Wx (66),(v1)
+39: vpminsd Vx,Hx,Wx (66),(v1)
+3a: vpminuw Vx,Hx,Wx (66),(v1)
+3b: vpminud Vx,Hx,Wx (66),(v1)
+3c: vpmaxsb Vx,Hx,Wx (66),(v1)
+3d: vpmaxsd Vx,Hx,Wx (66),(v1)
+3e: vpmaxuw Vx,Hx,Wx (66),(v1)
+3f: vpmaxud Vx,Hx,Wx (66),(v1)
# 0x0f 0x38 0x40-0x8f
-40: pmulld Vdq,Wdq (66),(VEX),(o128)
-41: phminposuw Vdq,Wdq (66),(VEX),(o128)
-80: INVEPT Gd/q,Mdq (66)
-81: INVPID Gd/q,Mdq (66)
+40: vpmulld Vx,Hx,Wx (66),(v1)
+41: vphminposuw Vdq,Wdq (66),(v1)
+42:
+43:
+44:
+45: vpsrlvd/q Vx,Hx,Wx (66),(v)
+46: vpsravd Vx,Hx,Wx (66),(v)
+47: vpsllvd/q Vx,Hx,Wx (66),(v)
+# Skip 0x48-0x57
+58: vpbroadcastd Vx,Wx (66),(v)
+59: vpbroadcastq Vx,Wx (66),(v)
+5a: vbroadcasti128 Vqq,Mdq (66),(v)
+# Skip 0x5b-0x77
+78: vpbroadcastb Vx,Wx (66),(v)
+79: vpbroadcastw Vx,Wx (66),(v)
+# Skip 0x7a-0x7f
+80: INVEPT Gy,Mdq (66)
+81: INVPID Gy,Mdq (66)
+82: INVPCID Gy,Mdq (66)
+8c: vpmaskmovd/q Vx,Hx,Mx (66),(v)
+8e: vpmaskmovd/q Mx,Vx,Hx (66),(v)
# 0x0f 0x38 0x90-0xbf (FMA)
-96: vfmaddsub132pd/ps /r (66),(VEX)
-97: vfmsubadd132pd/ps /r (66),(VEX)
-98: vfmadd132pd/ps /r (66),(VEX)
-99: vfmadd132sd/ss /r (66),(VEX),(o128)
-9a: vfmsub132pd/ps /r (66),(VEX)
-9b: vfmsub132sd/ss /r (66),(VEX),(o128)
-9c: vfnmadd132pd/ps /r (66),(VEX)
-9d: vfnmadd132sd/ss /r (66),(VEX),(o128)
-9e: vfnmsub132pd/ps /r (66),(VEX)
-9f: vfnmsub132sd/ss /r (66),(VEX),(o128)
-a6: vfmaddsub213pd/ps /r (66),(VEX)
-a7: vfmsubadd213pd/ps /r (66),(VEX)
-a8: vfmadd213pd/ps /r (66),(VEX)
-a9: vfmadd213sd/ss /r (66),(VEX),(o128)
-aa: vfmsub213pd/ps /r (66),(VEX)
-ab: vfmsub213sd/ss /r (66),(VEX),(o128)
-ac: vfnmadd213pd/ps /r (66),(VEX)
-ad: vfnmadd213sd/ss /r (66),(VEX),(o128)
-ae: vfnmsub213pd/ps /r (66),(VEX)
-af: vfnmsub213sd/ss /r (66),(VEX),(o128)
-b6: vfmaddsub231pd/ps /r (66),(VEX)
-b7: vfmsubadd231pd/ps /r (66),(VEX)
-b8: vfmadd231pd/ps /r (66),(VEX)
-b9: vfmadd231sd/ss /r (66),(VEX),(o128)
-ba: vfmsub231pd/ps /r (66),(VEX)
-bb: vfmsub231sd/ss /r (66),(VEX),(o128)
-bc: vfnmadd231pd/ps /r (66),(VEX)
-bd: vfnmadd231sd/ss /r (66),(VEX),(o128)
-be: vfnmsub231pd/ps /r (66),(VEX)
-bf: vfnmsub231sd/ss /r (66),(VEX),(o128)
+90: vgatherdd/q Vx,Hx,Wx (66),(v)
+91: vgatherqd/q Vx,Hx,Wx (66),(v)
+92: vgatherdps/d Vx,Hx,Wx (66),(v)
+93: vgatherqps/d Vx,Hx,Wx (66),(v)
+94:
+95:
+96: vfmaddsub132ps/d Vx,Hx,Wx (66),(v)
+97: vfmsubadd132ps/d Vx,Hx,Wx (66),(v)
+98: vfmadd132ps/d Vx,Hx,Wx (66),(v)
+99: vfmadd132ss/d Vx,Hx,Wx (66),(v),(v1)
+9a: vfmsub132ps/d Vx,Hx,Wx (66),(v)
+9b: vfmsub132ss/d Vx,Hx,Wx (66),(v),(v1)
+9c: vfnmadd132ps/d Vx,Hx,Wx (66),(v)
+9d: vfnmadd132ss/d Vx,Hx,Wx (66),(v),(v1)
+9e: vfnmsub132ps/d Vx,Hx,Wx (66),(v)
+9f: vfnmsub132ss/d Vx,Hx,Wx (66),(v),(v1)
+a6: vfmaddsub213ps/d Vx,Hx,Wx (66),(v)
+a7: vfmsubadd213ps/d Vx,Hx,Wx (66),(v)
+a8: vfmadd213ps/d Vx,Hx,Wx (66),(v)
+a9: vfmadd213ss/d Vx,Hx,Wx (66),(v),(v1)
+aa: vfmsub213ps/d Vx,Hx,Wx (66),(v)
+ab: vfmsub213ss/d Vx,Hx,Wx (66),(v),(v1)
+ac: vfnmadd213ps/d Vx,Hx,Wx (66),(v)
+ad: vfnmadd213ss/d Vx,Hx,Wx (66),(v),(v1)
+ae: vfnmsub213ps/d Vx,Hx,Wx (66),(v)
+af: vfnmsub213ss/d Vx,Hx,Wx (66),(v),(v1)
+b6: vfmaddsub231ps/d Vx,Hx,Wx (66),(v)
+b7: vfmsubadd231ps/d Vx,Hx,Wx (66),(v)
+b8: vfmadd231ps/d Vx,Hx,Wx (66),(v)
+b9: vfmadd231ss/d Vx,Hx,Wx (66),(v),(v1)
+ba: vfmsub231ps/d Vx,Hx,Wx (66),(v)
+bb: vfmsub231ss/d Vx,Hx,Wx (66),(v),(v1)
+bc: vfnmadd231ps/d Vx,Hx,Wx (66),(v)
+bd: vfnmadd231ss/d Vx,Hx,Wx (66),(v),(v1)
+be: vfnmsub231ps/d Vx,Hx,Wx (66),(v)
+bf: vfnmsub231ss/d Vx,Hx,Wx (66),(v),(v1)
# 0x0f 0x38 0xc0-0xff
-db: aesimc Vdq,Wdq (66),(VEX),(o128)
-dc: aesenc Vdq,Wdq (66),(VEX),(o128)
-dd: aesenclast Vdq,Wdq (66),(VEX),(o128)
-de: aesdec Vdq,Wdq (66),(VEX),(o128)
-df: aesdeclast Vdq,Wdq (66),(VEX),(o128)
-f0: MOVBE Gv,Mv | CRC32 Gd,Eb (F2)
-f1: MOVBE Mv,Gv | CRC32 Gd,Ev (F2)
+db: VAESIMC Vdq,Wdq (66),(v1)
+dc: VAESENC Vdq,Hdq,Wdq (66),(v1)
+dd: VAESENCLAST Vdq,Hdq,Wdq (66),(v1)
+de: VAESDEC Vdq,Hdq,Wdq (66),(v1)
+df: VAESDECLAST Vdq,Hdq,Wdq (66),(v1)
+f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2)
+f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2)
+f3: ANDN Gy,By,Ey (v)
+f4: Grp17 (1A)
+f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
+f6: MULX By,Gy,rDX,Ey (F2),(v)
+f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
EndTable
Table: 3-byte opcode 2 (0x0f 0x3a)
Referrer: 3-byte escape 2
AVXcode: 3
# 0x0f 0x3a 0x00-0xff
-04: vpermilps /r,Ib (66),(oVEX)
-05: vpermilpd /r,Ib (66),(oVEX)
-06: vperm2f128 /r,Ib (66),(oVEX),(o256)
-08: roundps Vdq,Wdq,Ib (66),(VEX)
-09: roundpd Vdq,Wdq,Ib (66),(VEX)
-0a: roundss Vss,Wss,Ib (66),(VEX),(o128)
-0b: roundsd Vsd,Wsd,Ib (66),(VEX),(o128)
-0c: blendps Vdq,Wdq,Ib (66),(VEX)
-0d: blendpd Vdq,Wdq,Ib (66),(VEX)
-0e: pblendw Vdq,Wdq,Ib (66),(VEX),(o128)
-0f: palignr Pq,Qq,Ib | palignr Vdq,Wdq,Ib (66),(VEX),(o128)
-14: pextrb Rd/Mb,Vdq,Ib (66),(VEX),(o128)
-15: pextrw Rd/Mw,Vdq,Ib (66),(VEX),(o128)
-16: pextrd/pextrq Ed/q,Vdq,Ib (66),(VEX),(o128)
-17: extractps Ed,Vdq,Ib (66),(VEX),(o128)
-18: vinsertf128 /r,Ib (66),(oVEX),(o256)
-19: vextractf128 /r,Ib (66),(oVEX),(o256)
-20: pinsrb Vdq,Rd/q/Mb,Ib (66),(VEX),(o128)
-21: insertps Vdq,Udq/Md,Ib (66),(VEX),(o128)
-22: pinsrd/pinsrq Vdq,Ed/q,Ib (66),(VEX),(o128)
-40: dpps Vdq,Wdq,Ib (66),(VEX)
-41: dppd Vdq,Wdq,Ib (66),(VEX),(o128)
-42: mpsadbw Vdq,Wdq,Ib (66),(VEX),(o128)
-44: pclmulq Vdq,Wdq,Ib (66),(VEX),(o128)
-4a: vblendvps /r,Ib (66),(oVEX)
-4b: vblendvpd /r,Ib (66),(oVEX)
-4c: vpblendvb /r,Ib (66),(oVEX),(o128)
-60: pcmpestrm Vdq,Wdq,Ib (66),(VEX),(o128)
-61: pcmpestri Vdq,Wdq,Ib (66),(VEX),(o128)
-62: pcmpistrm Vdq,Wdq,Ib (66),(VEX),(o128)
-63: pcmpistri Vdq,Wdq,Ib (66),(VEX),(o128)
-df: aeskeygenassist Vdq,Wdq,Ib (66),(VEX),(o128)
+00: vpermq Vqq,Wqq,Ib (66),(v)
+01: vpermpd Vqq,Wqq,Ib (66),(v)
+02: vpblendd Vx,Hx,Wx,Ib (66),(v)
+03:
+04: vpermilps Vx,Wx,Ib (66),(v)
+05: vpermilpd Vx,Wx,Ib (66),(v)
+06: vperm2f128 Vqq,Hqq,Wqq,Ib (66),(v)
+07:
+08: vroundps Vx,Wx,Ib (66)
+09: vroundpd Vx,Wx,Ib (66)
+0a: vroundss Vss,Wss,Ib (66),(v1)
+0b: vroundsd Vsd,Wsd,Ib (66),(v1)
+0c: vblendps Vx,Hx,Wx,Ib (66)
+0d: vblendpd Vx,Hx,Wx,Ib (66)
+0e: vpblendw Vx,Hx,Wx,Ib (66),(v1)
+0f: palignr Pq,Qq,Ib | vpalignr Vx,Hx,Wx,Ib (66),(v1)
+14: vpextrb Rd/Mb,Vdq,Ib (66),(v1)
+15: vpextrw Rd/Mw,Vdq,Ib (66),(v1)
+16: vpextrd/q Ey,Vdq,Ib (66),(v1)
+17: vextractps Ed,Vdq,Ib (66),(v1)
+18: vinsertf128 Vqq,Hqq,Wqq,Ib (66),(v)
+19: vextractf128 Wdq,Vqq,Ib (66),(v)
+1d: vcvtps2ph Wx,Vx,Ib (66),(v)
+20: vpinsrb Vdq,Hdq,Ry/Mb,Ib (66),(v1)
+21: vinsertps Vdq,Hdq,Udq/Md,Ib (66),(v1)
+22: vpinsrd/q Vdq,Hdq,Ey,Ib (66),(v1)
+38: vinserti128 Vqq,Hqq,Wqq,Ib (66),(v)
+39: vextracti128 Wdq,Vqq,Ib (66),(v)
+40: vdpps Vx,Hx,Wx,Ib (66)
+41: vdppd Vdq,Hdq,Wdq,Ib (66),(v1)
+42: vmpsadbw Vx,Hx,Wx,Ib (66),(v1)
+44: vpclmulqdq Vdq,Hdq,Wdq,Ib (66),(v1)
+46: vperm2i128 Vqq,Hqq,Wqq,Ib (66),(v)
+4a: vblendvps Vx,Hx,Wx,Lx (66),(v)
+4b: vblendvpd Vx,Hx,Wx,Lx (66),(v)
+4c: vpblendvb Vx,Hx,Wx,Lx (66),(v1)
+60: vpcmpestrm Vdq,Wdq,Ib (66),(v1)
+61: vpcmpestri Vdq,Wdq,Ib (66),(v1)
+62: vpcmpistrm Vdq,Wdq,Ib (66),(v1)
+63: vpcmpistri Vdq,Wdq,Ib (66),(v1)
+df: VAESKEYGEN Vdq,Wdq,Ib (66),(v1)
+f0: RORX Gy,Ey,Ib (F2),(v)
EndTable
GrpTable: Grp1
@@ -790,7 +843,7 @@
2: CALLN Ev (f64)
3: CALLF Ep
4: JMPN Ev (f64)
-5: JMPF Ep
+5: JMPF Mp
6: PUSH Ev (d64)
7:
EndTable
@@ -807,7 +860,7 @@
GrpTable: Grp7
0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B)
3: LIDT Ms
4: SMSW Mw/Rv
5:
@@ -824,44 +877,45 @@
GrpTable: Grp9
1: CMPXCHG8B/16B Mq/Mdq
-6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3)
-7: VMPTRST Mq
+6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) | RDRAND Rv (11B)
+7: VMPTRST Mq | VMPTRST Mq (F3)
EndTable
GrpTable: Grp10
EndTable
GrpTable: Grp11
+# Note: the operands are given by group opcode
0: MOV
EndTable
GrpTable: Grp12
-2: psrlw Nq,Ib (11B) | psrlw Udq,Ib (66),(11B),(VEX),(o128)
-4: psraw Nq,Ib (11B) | psraw Udq,Ib (66),(11B),(VEX),(o128)
-6: psllw Nq,Ib (11B) | psllw Udq,Ib (66),(11B),(VEX),(o128)
+2: psrlw Nq,Ib (11B) | vpsrlw Hx,Ux,Ib (66),(11B),(v1)
+4: psraw Nq,Ib (11B) | vpsraw Hx,Ux,Ib (66),(11B),(v1)
+6: psllw Nq,Ib (11B) | vpsllw Hx,Ux,Ib (66),(11B),(v1)
EndTable
GrpTable: Grp13
-2: psrld Nq,Ib (11B) | psrld Udq,Ib (66),(11B),(VEX),(o128)
-4: psrad Nq,Ib (11B) | psrad Udq,Ib (66),(11B),(VEX),(o128)
-6: pslld Nq,Ib (11B) | pslld Udq,Ib (66),(11B),(VEX),(o128)
+2: psrld Nq,Ib (11B) | vpsrld Hx,Ux,Ib (66),(11B),(v1)
+4: psrad Nq,Ib (11B) | vpsrad Hx,Ux,Ib (66),(11B),(v1)
+6: pslld Nq,Ib (11B) | vpslld Hx,Ux,Ib (66),(11B),(v1)
EndTable
GrpTable: Grp14
-2: psrlq Nq,Ib (11B) | psrlq Udq,Ib (66),(11B),(VEX),(o128)
-3: psrldq Udq,Ib (66),(11B),(VEX),(o128)
-6: psllq Nq,Ib (11B) | psllq Udq,Ib (66),(11B),(VEX),(o128)
-7: pslldq Udq,Ib (66),(11B),(VEX),(o128)
+2: psrlq Nq,Ib (11B) | vpsrlq Hx,Ux,Ib (66),(11B),(v1)
+3: vpsrldq Hx,Ux,Ib (66),(11B),(v1)
+6: psllq Nq,Ib (11B) | vpsllq Hx,Ux,Ib (66),(11B),(v1)
+7: vpslldq Hx,Ux,Ib (66),(11B),(v1)
EndTable
GrpTable: Grp15
-0: fxsave
-1: fxstor
-2: ldmxcsr (VEX)
-3: stmxcsr (VEX)
+0: fxsave | RDFSBASE Ry (F3),(11B)
+1: fxstor | RDGSBASE Ry (F3),(11B)
+2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
+3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE
5: XRSTOR | lfence (11B)
-6: mfence (11B)
+6: XSAVEOPT | mfence (11B)
7: clflush | sfence (11B)
EndTable
@@ -872,6 +926,12 @@
3: prefetch T2
EndTable
+GrpTable: Grp17
+1: BLSR By,Ey (v)
+2: BLSMSK By,Ey (v)
+3: BLSI By,Ey (v)
+EndTable
+
# AMD's Prefetch Group
GrpTable: GrpP
0: PREFETCH
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 3d11327..23d8e5f 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -27,6 +27,4 @@
obj-$(CONFIG_ACPI_NUMA) += srat.o
obj-$(CONFIG_NUMA_EMU) += numa_emulation.o
-obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o
-
obj-$(CONFIG_MEMTEST) += memtest.o
diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c
index d0474ad..1fb85db 100644
--- a/arch/x86/mm/extable.c
+++ b/arch/x86/mm/extable.c
@@ -25,7 +25,7 @@
if (fixup) {
/* If fixup is less than 16, it means uaccess error */
if (fixup->fixup < 16) {
- current_thread_info()->uaccess_err = -EFAULT;
+ current_thread_info()->uaccess_err = 1;
regs->ip += fixup->fixup;
return 1;
}
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 5db0490..9d74824 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -626,7 +626,7 @@
static noinline void
no_context(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
+ unsigned long address, int signal, int si_code)
{
struct task_struct *tsk = current;
unsigned long *stackend;
@@ -634,8 +634,17 @@
int sig;
/* Are we prepared to handle this kernel fault? */
- if (fixup_exception(regs))
+ if (fixup_exception(regs)) {
+ if (current_thread_info()->sig_on_uaccess_error && signal) {
+ tsk->thread.trap_no = 14;
+ tsk->thread.error_code = error_code | PF_USER;
+ tsk->thread.cr2 = address;
+
+ /* XXX: hwpoison faults will set the wrong code. */
+ force_sig_info_fault(signal, si_code, address, tsk, 0);
+ }
return;
+ }
/*
* 32-bit:
@@ -755,7 +764,7 @@
if (is_f00f_bug(regs, address))
return;
- no_context(regs, error_code, address);
+ no_context(regs, error_code, address, SIGSEGV, si_code);
}
static noinline void
@@ -819,7 +828,7 @@
/* Kernel mode? Handle exceptions or die: */
if (!(error_code & PF_USER)) {
- no_context(regs, error_code, address);
+ no_context(regs, error_code, address, SIGBUS, BUS_ADRERR);
return;
}
@@ -854,7 +863,7 @@
if (!(fault & VM_FAULT_RETRY))
up_read(¤t->mm->mmap_sem);
if (!(error_code & PF_USER))
- no_context(regs, error_code, address);
+ no_context(regs, error_code, address, 0, 0);
return 1;
}
if (!(fault & VM_FAULT_ERROR))
@@ -864,7 +873,8 @@
/* Kernel mode? Handle exceptions or die: */
if (!(error_code & PF_USER)) {
up_read(¤t->mm->mmap_sem);
- no_context(regs, error_code, address);
+ no_context(regs, error_code, address,
+ SIGSEGV, SEGV_MAPERR);
return 1;
}
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index ea30585..dd74e46 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -201,6 +201,8 @@
do {
VM_BUG_ON(compound_head(page) != head);
pages[*nr] = page;
+ if (PageTail(page))
+ get_huge_page_tail(page);
(*nr)++;
page++;
refs++;
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index b499626..f4f29b1 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -45,6 +45,7 @@
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
BUG_ON(!pte_none(*(kmap_pte-idx)));
set_pte(kmap_pte-idx, mk_pte(page, prot));
+ arch_flush_lazy_mmu_mode();
return (void *)vaddr;
}
@@ -88,6 +89,7 @@
*/
kpte_clear_flush(kmap_pte-idx, vaddr);
kmap_atomic_idx_pop();
+ arch_flush_lazy_mmu_mode();
}
#ifdef CONFIG_DEBUG_HIGHMEM
else {
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 87488b9..a298914 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -67,7 +67,7 @@
good_end = max_pfn_mapped << PAGE_SHIFT;
base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE);
- if (base == MEMBLOCK_ERROR)
+ if (!base)
panic("Cannot find space for the kernel page tables");
pgt_buf_start = base >> PAGE_SHIFT;
@@ -80,7 +80,7 @@
void __init native_pagetable_reserve(u64 start, u64 end)
{
- memblock_x86_reserve_range(start, end, "PGTABLE");
+ memblock_reserve(start, end - start);
}
struct map_range {
@@ -279,8 +279,8 @@
* pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top)
* so that they can be reused for other purposes.
*
- * On native it just means calling memblock_x86_reserve_range, on Xen it
- * also means marking RW the pagetable pages that we allocated before
+ * On native it just means calling memblock_reserve, on Xen it also
+ * means marking RW the pagetable pages that we allocated before
* but that haven't been used.
*
* In fact on xen we mark RO the whole range pgt_buf_start -
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 29f7c6d9..0c1da39 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -427,23 +427,17 @@
void __init add_highpages_with_active_regions(int nid,
unsigned long start_pfn, unsigned long end_pfn)
{
- struct range *range;
- int nr_range;
- int i;
+ phys_addr_t start, end;
+ u64 i;
- nr_range = __get_free_all_memory_range(&range, nid, start_pfn, end_pfn);
-
- for (i = 0; i < nr_range; i++) {
- struct page *page;
- int node_pfn;
-
- for (node_pfn = range[i].start; node_pfn < range[i].end;
- node_pfn++) {
- if (!pfn_valid(node_pfn))
- continue;
- page = pfn_to_page(node_pfn);
- add_one_highpage_init(page);
- }
+ for_each_free_mem_range(i, nid, &start, &end, NULL) {
+ unsigned long pfn = clamp_t(unsigned long, PFN_UP(start),
+ start_pfn, end_pfn);
+ unsigned long e_pfn = clamp_t(unsigned long, PFN_DOWN(end),
+ start_pfn, end_pfn);
+ for ( ; pfn < e_pfn; pfn++)
+ if (pfn_valid(pfn))
+ add_one_highpage_init(pfn_to_page(pfn));
}
}
#else
@@ -650,18 +644,18 @@
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > max_low_pfn)
highstart_pfn = max_low_pfn;
- memblock_x86_register_active_regions(0, 0, highend_pfn);
- sparse_memory_present_with_active_regions(0);
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
pages_to_mb(highend_pfn - highstart_pfn));
num_physpages = highend_pfn;
high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
#else
- memblock_x86_register_active_regions(0, 0, max_low_pfn);
- sparse_memory_present_with_active_regions(0);
num_physpages = max_low_pfn;
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
#endif
+
+ memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
+ sparse_memory_present_with_active_regions(0);
+
#ifdef CONFIG_FLATMEM
max_mapnr = num_physpages;
#endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index bbaaa00..a8a56ce 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -608,7 +608,7 @@
#ifndef CONFIG_NUMA
void __init initmem_init(void)
{
- memblock_x86_register_active_regions(0, 0, max_pfn);
+ memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
}
#endif
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
deleted file mode 100644
index 992da5e..0000000
--- a/arch/x86/mm/memblock.c
+++ /dev/null
@@ -1,348 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/memblock.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/range.h>
-
-/* Check for already reserved areas */
-bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align)
-{
- struct memblock_region *r;
- u64 addr = *addrp, last;
- u64 size = *sizep;
- bool changed = false;
-
-again:
- last = addr + size;
- for_each_memblock(reserved, r) {
- if (last > r->base && addr < r->base) {
- size = r->base - addr;
- changed = true;
- goto again;
- }
- if (last > (r->base + r->size) && addr < (r->base + r->size)) {
- addr = round_up(r->base + r->size, align);
- size = last - addr;
- changed = true;
- goto again;
- }
- if (last <= (r->base + r->size) && addr >= r->base) {
- *sizep = 0;
- return false;
- }
- }
- if (changed) {
- *addrp = addr;
- *sizep = size;
- }
- return changed;
-}
-
-/*
- * Find next free range after start, and size is returned in *sizep
- */
-u64 __init memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align)
-{
- struct memblock_region *r;
-
- for_each_memblock(memory, r) {
- u64 ei_start = r->base;
- u64 ei_last = ei_start + r->size;
- u64 addr;
-
- addr = round_up(ei_start, align);
- if (addr < start)
- addr = round_up(start, align);
- if (addr >= ei_last)
- continue;
- *sizep = ei_last - addr;
- while (memblock_x86_check_reserved_size(&addr, sizep, align))
- ;
-
- if (*sizep)
- return addr;
- }
-
- return MEMBLOCK_ERROR;
-}
-
-static __init struct range *find_range_array(int count)
-{
- u64 end, size, mem;
- struct range *range;
-
- size = sizeof(struct range) * count;
- end = memblock.current_limit;
-
- mem = memblock_find_in_range(0, end, size, sizeof(struct range));
- if (mem == MEMBLOCK_ERROR)
- panic("can not find more space for range array");
-
- /*
- * This range is tempoaray, so don't reserve it, it will not be
- * overlapped because We will not alloccate new buffer before
- * We discard this one
- */
- range = __va(mem);
- memset(range, 0, size);
-
- return range;
-}
-
-static void __init memblock_x86_subtract_reserved(struct range *range, int az)
-{
- u64 final_start, final_end;
- struct memblock_region *r;
-
- /* Take out region array itself at first*/
- memblock_free_reserved_regions();
-
- memblock_dbg("Subtract (%ld early reservations)\n", memblock.reserved.cnt);
-
- for_each_memblock(reserved, r) {
- memblock_dbg(" [%010llx-%010llx]\n", (u64)r->base, (u64)r->base + r->size - 1);
- final_start = PFN_DOWN(r->base);
- final_end = PFN_UP(r->base + r->size);
- if (final_start >= final_end)
- continue;
- subtract_range(range, az, final_start, final_end);
- }
-
- /* Put region array back ? */
- memblock_reserve_reserved_regions();
-}
-
-struct count_data {
- int nr;
-};
-
-static int __init count_work_fn(unsigned long start_pfn,
- unsigned long end_pfn, void *datax)
-{
- struct count_data *data = datax;
-
- data->nr++;
-
- return 0;
-}
-
-static int __init count_early_node_map(int nodeid)
-{
- struct count_data data;
-
- data.nr = 0;
- work_with_active_regions(nodeid, count_work_fn, &data);
-
- return data.nr;
-}
-
-int __init __get_free_all_memory_range(struct range **rangep, int nodeid,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- int count;
- struct range *range;
- int nr_range;
-
- count = (memblock.reserved.cnt + count_early_node_map(nodeid)) * 2;
-
- range = find_range_array(count);
- nr_range = 0;
-
- /*
- * Use early_node_map[] and memblock.reserved.region to get range array
- * at first
- */
- nr_range = add_from_early_node_map(range, count, nr_range, nodeid);
- subtract_range(range, count, 0, start_pfn);
- subtract_range(range, count, end_pfn, -1ULL);
-
- memblock_x86_subtract_reserved(range, count);
- nr_range = clean_sort_range(range, count);
-
- *rangep = range;
- return nr_range;
-}
-
-int __init get_free_all_memory_range(struct range **rangep, int nodeid)
-{
- unsigned long end_pfn = -1UL;
-
-#ifdef CONFIG_X86_32
- end_pfn = max_low_pfn;
-#endif
- return __get_free_all_memory_range(rangep, nodeid, 0, end_pfn);
-}
-
-static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free)
-{
- int i, count;
- struct range *range;
- int nr_range;
- u64 final_start, final_end;
- u64 free_size;
- struct memblock_region *r;
-
- count = (memblock.reserved.cnt + memblock.memory.cnt) * 2;
-
- range = find_range_array(count);
- nr_range = 0;
-
- addr = PFN_UP(addr);
- limit = PFN_DOWN(limit);
-
- for_each_memblock(memory, r) {
- final_start = PFN_UP(r->base);
- final_end = PFN_DOWN(r->base + r->size);
- if (final_start >= final_end)
- continue;
- if (final_start >= limit || final_end <= addr)
- continue;
-
- nr_range = add_range(range, count, nr_range, final_start, final_end);
- }
- subtract_range(range, count, 0, addr);
- subtract_range(range, count, limit, -1ULL);
-
- /* Subtract memblock.reserved.region in range ? */
- if (!get_free)
- goto sort_and_count_them;
- for_each_memblock(reserved, r) {
- final_start = PFN_DOWN(r->base);
- final_end = PFN_UP(r->base + r->size);
- if (final_start >= final_end)
- continue;
- if (final_start >= limit || final_end <= addr)
- continue;
-
- subtract_range(range, count, final_start, final_end);
- }
-
-sort_and_count_them:
- nr_range = clean_sort_range(range, count);
-
- free_size = 0;
- for (i = 0; i < nr_range; i++)
- free_size += range[i].end - range[i].start;
-
- return free_size << PAGE_SHIFT;
-}
-
-u64 __init memblock_x86_free_memory_in_range(u64 addr, u64 limit)
-{
- return __memblock_x86_memory_in_range(addr, limit, true);
-}
-
-u64 __init memblock_x86_memory_in_range(u64 addr, u64 limit)
-{
- return __memblock_x86_memory_in_range(addr, limit, false);
-}
-
-void __init memblock_x86_reserve_range(u64 start, u64 end, char *name)
-{
- if (start == end)
- return;
-
- if (WARN_ONCE(start > end, "memblock_x86_reserve_range: wrong range [%#llx, %#llx)\n", start, end))
- return;
-
- memblock_dbg(" memblock_x86_reserve_range: [%#010llx-%#010llx] %16s\n", start, end - 1, name);
-
- memblock_reserve(start, end - start);
-}
-
-void __init memblock_x86_free_range(u64 start, u64 end)
-{
- if (start == end)
- return;
-
- if (WARN_ONCE(start > end, "memblock_x86_free_range: wrong range [%#llx, %#llx)\n", start, end))
- return;
-
- memblock_dbg(" memblock_x86_free_range: [%#010llx-%#010llx]\n", start, end - 1);
-
- memblock_free(start, end - start);
-}
-
-/*
- * Need to call this function after memblock_x86_register_active_regions,
- * so early_node_map[] is filled already.
- */
-u64 __init memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align)
-{
- u64 addr;
- addr = find_memory_core_early(nid, size, align, start, end);
- if (addr != MEMBLOCK_ERROR)
- return addr;
-
- /* Fallback, should already have start end within node range */
- return memblock_find_in_range(start, end, size, align);
-}
-
-/*
- * Finds an active region in the address range from start_pfn to last_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the memblock entry.
- */
-static int __init memblock_x86_find_active_region(const struct memblock_region *ei,
- unsigned long start_pfn,
- unsigned long last_pfn,
- unsigned long *ei_startpfn,
- unsigned long *ei_endpfn)
-{
- u64 align = PAGE_SIZE;
-
- *ei_startpfn = round_up(ei->base, align) >> PAGE_SHIFT;
- *ei_endpfn = round_down(ei->base + ei->size, align) >> PAGE_SHIFT;
-
- /* Skip map entries smaller than a page */
- if (*ei_startpfn >= *ei_endpfn)
- return 0;
-
- /* Skip if map is outside the node */
- if (*ei_endpfn <= start_pfn || *ei_startpfn >= last_pfn)
- return 0;
-
- /* Check for overlaps */
- if (*ei_startpfn < start_pfn)
- *ei_startpfn = start_pfn;
- if (*ei_endpfn > last_pfn)
- *ei_endpfn = last_pfn;
-
- return 1;
-}
-
-/* Walk the memblock.memory map and register active regions within a node */
-void __init memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
- unsigned long last_pfn)
-{
- unsigned long ei_startpfn;
- unsigned long ei_endpfn;
- struct memblock_region *r;
-
- for_each_memblock(memory, r)
- if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
- &ei_startpfn, &ei_endpfn))
- add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
-/*
- * Find the hole size (in bytes) in the memory range.
- * @start: starting address of the memory range to scan
- * @end: ending address of the memory range to scan
- */
-u64 __init memblock_x86_hole_size(u64 start, u64 end)
-{
- unsigned long start_pfn = start >> PAGE_SHIFT;
- unsigned long last_pfn = end >> PAGE_SHIFT;
- unsigned long ei_startpfn, ei_endpfn, ram = 0;
- struct memblock_region *r;
-
- for_each_memblock(memory, r)
- if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
- &ei_startpfn, &ei_endpfn))
- ram += ei_endpfn - ei_startpfn;
-
- return end - start - ((u64)ram << PAGE_SHIFT);
-}
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 92faf3a..c80b9fb 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -34,7 +34,7 @@
(unsigned long long) pattern,
(unsigned long long) start_bad,
(unsigned long long) end_bad);
- memblock_x86_reserve_range(start_bad, end_bad, "BAD RAM");
+ memblock_reserve(start_bad, end_bad - start_bad);
}
static void __init memtest(u64 pattern, u64 start_phys, u64 size)
@@ -70,24 +70,19 @@
static void __init do_one_pass(u64 pattern, u64 start, u64 end)
{
- u64 size = 0;
+ u64 i;
+ phys_addr_t this_start, this_end;
- while (start < end) {
- start = memblock_x86_find_in_range_size(start, &size, 1);
-
- /* done ? */
- if (start >= end)
- break;
- if (start + size > end)
- size = end - start;
-
- printk(KERN_INFO " %010llx - %010llx pattern %016llx\n",
- (unsigned long long) start,
- (unsigned long long) start + size,
- (unsigned long long) cpu_to_be64(pattern));
- memtest(pattern, start, size);
-
- start += size;
+ for_each_free_mem_range(i, MAX_NUMNODES, &this_start, &this_end, NULL) {
+ this_start = clamp_t(phys_addr_t, this_start, start, end);
+ this_end = clamp_t(phys_addr_t, this_end, start, end);
+ if (this_start < this_end) {
+ printk(KERN_INFO " %010llx - %010llx pattern %016llx\n",
+ (unsigned long long)this_start,
+ (unsigned long long)this_end,
+ (unsigned long long)cpu_to_be64(pattern));
+ memtest(pattern, this_start, this_end - this_start);
+ }
}
}
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index fbeaaf4..496f494 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -192,8 +192,6 @@
/* Initialize NODE_DATA for a node on the local memory */
static void __init setup_node_data(int nid, u64 start, u64 end)
{
- const u64 nd_low = PFN_PHYS(MAX_DMA_PFN);
- const u64 nd_high = PFN_PHYS(max_pfn_mapped);
const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
bool remapped = false;
u64 nd_pa;
@@ -224,17 +222,12 @@
nd_pa = __pa(nd);
remapped = true;
} else {
- nd_pa = memblock_x86_find_in_range_node(nid, nd_low, nd_high,
- nd_size, SMP_CACHE_BYTES);
- if (nd_pa == MEMBLOCK_ERROR)
- nd_pa = memblock_find_in_range(nd_low, nd_high,
- nd_size, SMP_CACHE_BYTES);
- if (nd_pa == MEMBLOCK_ERROR) {
+ nd_pa = memblock_alloc_nid(nd_size, SMP_CACHE_BYTES, nid);
+ if (!nd_pa) {
pr_err("Cannot find %zu bytes in node %d\n",
nd_size, nid);
return;
}
- memblock_x86_reserve_range(nd_pa, nd_pa + nd_size, "NODE_DATA");
nd = __va(nd_pa);
}
@@ -371,8 +364,7 @@
/* numa_distance could be 1LU marking allocation failure, test cnt */
if (numa_distance_cnt)
- memblock_x86_free_range(__pa(numa_distance),
- __pa(numa_distance) + size);
+ memblock_free(__pa(numa_distance), size);
numa_distance_cnt = 0;
numa_distance = NULL; /* enable table creation */
}
@@ -395,13 +387,13 @@
phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
size, PAGE_SIZE);
- if (phys == MEMBLOCK_ERROR) {
+ if (!phys) {
pr_warning("NUMA: Warning: can't allocate distance table!\n");
/* don't retry until explicitly reset */
numa_distance = (void *)1LU;
return -ENOMEM;
}
- memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
+ memblock_reserve(phys, size);
numa_distance = __va(phys);
numa_distance_cnt = cnt;
@@ -482,8 +474,8 @@
numaram = 0;
}
- e820ram = max_pfn - (memblock_x86_hole_size(0,
- PFN_PHYS(max_pfn)) >> PAGE_SHIFT);
+ e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
+
/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
@@ -505,13 +497,10 @@
if (WARN_ON(nodes_empty(node_possible_map)))
return -EINVAL;
- for (i = 0; i < mi->nr_blks; i++)
- memblock_x86_register_active_regions(mi->blk[i].nid,
- mi->blk[i].start >> PAGE_SHIFT,
- mi->blk[i].end >> PAGE_SHIFT);
-
- /* for out of order entries */
- sort_node_map();
+ for (i = 0; i < mi->nr_blks; i++) {
+ struct numa_memblk *mb = &mi->blk[i];
+ memblock_set_node(mb->start, mb->end - mb->start, mb->nid);
+ }
/*
* If sections array is gonna be used for pfn -> nid mapping, check
@@ -545,6 +534,8 @@
setup_node_data(nid, start, end);
}
+ /* Dump memblock with node info and return. */
+ memblock_dump_all();
return 0;
}
@@ -582,7 +573,7 @@
nodes_clear(node_possible_map);
nodes_clear(node_online_map);
memset(&numa_meminfo, 0, sizeof(numa_meminfo));
- remove_all_active_ranges();
+ WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES));
numa_reset_distance();
ret = init_func();
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 3adebe7..534255a 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -199,23 +199,23 @@
/* allocate node memory and the lowmem remap area */
node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES);
- if (node_pa == MEMBLOCK_ERROR) {
+ if (!node_pa) {
pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n",
size, nid);
return;
}
- memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
+ memblock_reserve(node_pa, size);
remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
max_low_pfn << PAGE_SHIFT,
size, LARGE_PAGE_BYTES);
- if (remap_pa == MEMBLOCK_ERROR) {
+ if (!remap_pa) {
pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
size, nid);
- memblock_x86_free_range(node_pa, node_pa + size);
+ memblock_free(node_pa, size);
return;
}
- memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
+ memblock_reserve(remap_pa, size);
remap_va = phys_to_virt(remap_pa);
/* perform actual remap */
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index dd27f40..92e2711 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -19,7 +19,7 @@
for_each_online_node(i)
pages += free_all_bootmem_node(NODE_DATA(i));
- pages += free_all_memory_core_early(MAX_NUMNODES);
+ pages += free_low_memory_core_early(MAX_NUMNODES);
return pages;
}
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index d0ed086..46db568 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -28,6 +28,16 @@
return -ENOENT;
}
+static u64 mem_hole_size(u64 start, u64 end)
+{
+ unsigned long start_pfn = PFN_UP(start);
+ unsigned long end_pfn = PFN_DOWN(end);
+
+ if (start_pfn < end_pfn)
+ return PFN_PHYS(absent_pages_in_range(start_pfn, end_pfn));
+ return 0;
+}
+
/*
* Sets up nid to range from @start to @end. The return value is -errno if
* something went wrong, 0 otherwise.
@@ -89,7 +99,7 @@
* Calculate target node size. x86_32 freaks on __udivdi3() so do
* the division in ulong number of pages and convert back.
*/
- size = max_addr - addr - memblock_x86_hole_size(addr, max_addr);
+ size = max_addr - addr - mem_hole_size(addr, max_addr);
size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes);
/*
@@ -135,8 +145,7 @@
* Continue to add memory to this fake node if its
* non-reserved memory is less than the per-node size.
*/
- while (end - start -
- memblock_x86_hole_size(start, end) < size) {
+ while (end - start - mem_hole_size(start, end) < size) {
end += FAKE_NODE_MIN_SIZE;
if (end > limit) {
end = limit;
@@ -150,7 +159,7 @@
* this one must extend to the boundary.
*/
if (end < dma32_end && dma32_end - end -
- memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+ mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
end = dma32_end;
/*
@@ -158,8 +167,7 @@
* next node, this one must extend to the end of the
* physical node.
*/
- if (limit - end -
- memblock_x86_hole_size(end, limit) < size)
+ if (limit - end - mem_hole_size(end, limit) < size)
end = limit;
ret = emu_setup_memblk(ei, pi, nid++ % nr_nodes,
@@ -180,7 +188,7 @@
{
u64 end = start + size;
- while (end - start - memblock_x86_hole_size(start, end) < size) {
+ while (end - start - mem_hole_size(start, end) < size) {
end += FAKE_NODE_MIN_SIZE;
if (end > max_addr) {
end = max_addr;
@@ -211,8 +219,7 @@
* creates a uniform distribution of node sizes across the entire
* machine (but not necessarily over physical nodes).
*/
- min_size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) /
- MAX_NUMNODES;
+ min_size = (max_addr - addr - mem_hole_size(addr, max_addr)) / MAX_NUMNODES;
min_size = max(min_size, FAKE_NODE_MIN_SIZE);
if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size)
min_size = (min_size + FAKE_NODE_MIN_SIZE) &
@@ -252,7 +259,7 @@
* this one must extend to the boundary.
*/
if (end < dma32_end && dma32_end - end -
- memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+ mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
end = dma32_end;
/*
@@ -260,8 +267,7 @@
* next node, this one must extend to the end of the
* physical node.
*/
- if (limit - end -
- memblock_x86_hole_size(end, limit) < size)
+ if (limit - end - mem_hole_size(end, limit) < size)
end = limit;
ret = emu_setup_memblk(ei, pi, nid++ % MAX_NUMNODES,
@@ -351,11 +357,11 @@
phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
phys_size, PAGE_SIZE);
- if (phys == MEMBLOCK_ERROR) {
+ if (!phys) {
pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");
goto no_emu;
}
- memblock_x86_reserve_range(phys, phys + phys_size, "TMP NUMA DIST");
+ memblock_reserve(phys, phys_size);
phys_dist = __va(phys);
for (i = 0; i < numa_dist_cnt; i++)
@@ -424,7 +430,7 @@
/* free the copied physical distance table */
if (phys_dist)
- memblock_x86_free_range(__pa(phys_dist), __pa(phys_dist) + phys_size);
+ memblock_free(__pa(phys_dist), phys_size);
return;
no_emu:
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index f9e5267..eda2acb 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -998,7 +998,7 @@
}
EXPORT_SYMBOL(set_memory_uc);
-int _set_memory_array(unsigned long *addr, int addrinarray,
+static int _set_memory_array(unsigned long *addr, int addrinarray,
unsigned long new_type)
{
int i, j;
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 81dbfde..fd61b3f 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -69,6 +69,12 @@
if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
return;
pxm = pa->proximity_domain;
+ apic_id = pa->apic_id;
+ if (!cpu_has_x2apic && (apic_id >= 0xff)) {
+ printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n",
+ pxm, apic_id);
+ return;
+ }
node = setup_node(pxm);
if (node < 0) {
printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
@@ -76,7 +82,6 @@
return;
}
- apic_id = pa->apic_id;
if (apic_id >= MAX_LOCAL_APIC) {
printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
return;
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index bfab3fa..7b65f75 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -568,8 +568,8 @@
break;
}
if (filter[i].jt != 0) {
- if (filter[i].jf)
- t_offset += is_near(f_offset) ? 2 : 6;
+ if (filter[i].jf && f_offset)
+ t_offset += is_near(f_offset) ? 2 : 5;
EMIT_COND_JMP(t_op, t_offset);
if (filter[i].jf)
EMIT_JMP(f_offset);
diff --git a/arch/x86/oprofile/Makefile b/arch/x86/oprofile/Makefile
index 446902b..1599f56 100644
--- a/arch/x86/oprofile/Makefile
+++ b/arch/x86/oprofile/Makefile
@@ -4,9 +4,8 @@
oprof.o cpu_buffer.o buffer_sync.o \
event_buffer.o oprofile_files.o \
oprofilefs.o oprofile_stats.o \
- timer_int.o )
+ timer_int.o nmi_timer_int.o )
oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
oprofile-$(CONFIG_X86_LOCAL_APIC) += nmi_int.o op_model_amd.o \
op_model_ppro.o op_model_p4.o
-oprofile-$(CONFIG_X86_IO_APIC) += nmi_timer_int.o
diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c
index cdfe4c5..9e138d0 100644
--- a/arch/x86/oprofile/init.c
+++ b/arch/x86/oprofile/init.c
@@ -16,34 +16,23 @@
* with the NMI mode driver.
*/
+#ifdef CONFIG_X86_LOCAL_APIC
extern int op_nmi_init(struct oprofile_operations *ops);
-extern int op_nmi_timer_init(struct oprofile_operations *ops);
extern void op_nmi_exit(void);
-extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
+#else
+static int op_nmi_init(struct oprofile_operations *ops) { return -ENODEV; }
+static void op_nmi_exit(void) { }
+#endif
+extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
int __init oprofile_arch_init(struct oprofile_operations *ops)
{
- int ret;
-
- ret = -ENODEV;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- ret = op_nmi_init(ops);
-#endif
-#ifdef CONFIG_X86_IO_APIC
- if (ret < 0)
- ret = op_nmi_timer_init(ops);
-#endif
ops->backtrace = x86_backtrace;
-
- return ret;
+ return op_nmi_init(ops);
}
-
void oprofile_arch_exit(void)
{
-#ifdef CONFIG_X86_LOCAL_APIC
op_nmi_exit();
-#endif
}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 75f9528..26b8a85 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -595,24 +595,36 @@
return 0;
}
-static int force_arch_perfmon;
-static int force_cpu_type(const char *str, struct kernel_param *kp)
+enum __force_cpu_type {
+ reserved = 0, /* do not force */
+ timer,
+ arch_perfmon,
+};
+
+static int force_cpu_type;
+
+static int set_cpu_type(const char *str, struct kernel_param *kp)
{
- if (!strcmp(str, "arch_perfmon")) {
- force_arch_perfmon = 1;
+ if (!strcmp(str, "timer")) {
+ force_cpu_type = timer;
+ printk(KERN_INFO "oprofile: forcing NMI timer mode\n");
+ } else if (!strcmp(str, "arch_perfmon")) {
+ force_cpu_type = arch_perfmon;
printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
+ } else {
+ force_cpu_type = 0;
}
return 0;
}
-module_param_call(cpu_type, force_cpu_type, NULL, NULL, 0);
+module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0);
static int __init ppro_init(char **cpu_type)
{
__u8 cpu_model = boot_cpu_data.x86_model;
struct op_x86_model_spec *spec = &op_ppro_spec; /* default */
- if (force_arch_perfmon && cpu_has_arch_perfmon)
+ if (force_cpu_type == arch_perfmon && cpu_has_arch_perfmon)
return 0;
/*
@@ -679,6 +691,9 @@
if (!cpu_has_apic)
return -ENODEV;
+ if (force_cpu_type == timer)
+ return -ENODEV;
+
switch (vendor) {
case X86_VENDOR_AMD:
/* Needs to be at least an Athlon (or hammer in 32bit mode) */
diff --git a/arch/x86/oprofile/nmi_timer_int.c b/arch/x86/oprofile/nmi_timer_int.c
deleted file mode 100644
index 7f8052c..0000000
--- a/arch/x86/oprofile/nmi_timer_int.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/**
- * @file nmi_timer_int.c
- *
- * @remark Copyright 2003 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo <zwane@linuxpower.ca>
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/oprofile.h>
-#include <linux/rcupdate.h>
-#include <linux/kdebug.h>
-
-#include <asm/nmi.h>
-#include <asm/apic.h>
-#include <asm/ptrace.h>
-
-static int profile_timer_exceptions_notify(unsigned int val, struct pt_regs *regs)
-{
- oprofile_add_sample(regs, 0);
- return NMI_HANDLED;
-}
-
-static int timer_start(void)
-{
- if (register_nmi_handler(NMI_LOCAL, profile_timer_exceptions_notify,
- 0, "oprofile-timer"))
- return 1;
- return 0;
-}
-
-
-static void timer_stop(void)
-{
- unregister_nmi_handler(NMI_LOCAL, "oprofile-timer");
- synchronize_sched(); /* Allow already-started NMIs to complete. */
-}
-
-
-int __init op_nmi_timer_init(struct oprofile_operations *ops)
-{
- ops->start = timer_start;
- ops->stop = timer_stop;
- ops->cpu_type = "timer";
- printk(KERN_INFO "oprofile: using NMI timer interrupt.\n");
- return 0;
-}
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index db0e9a5..da8fe05 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -44,7 +44,7 @@
pcibios_enabled = 1;
set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT);
if (__supported_pte_mask & _PAGE_NX)
- printk(KERN_INFO "PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.\n");
+ printk(KERN_INFO "PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
}
/*
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 37718f0..4cf9bd0 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -238,7 +238,8 @@
spin_lock_irqsave(&rtc_lock, flags);
efi_call_phys_prelog();
- status = efi_call_phys2(efi_phys.get_time, tm, tc);
+ status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm),
+ virt_to_phys(tc));
efi_call_phys_epilog();
spin_unlock_irqrestore(&rtc_lock, flags);
return status;
@@ -352,8 +353,7 @@
boot_params.efi_info.efi_memdesc_size;
memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
- memblock_x86_reserve_range(pmap, pmap + memmap.nr_map * memmap.desc_size,
- "EFI memmap");
+ memblock_reserve(pmap, memmap.nr_map * memmap.desc_size);
}
#if EFI_DEBUG
@@ -397,16 +397,14 @@
if ((start+size >= virt_to_phys(_text)
&& start <= virt_to_phys(_end)) ||
!e820_all_mapped(start, start+size, E820_RAM) ||
- memblock_x86_check_reserved_size(&start, &size,
- 1<<EFI_PAGE_SHIFT)) {
+ memblock_is_region_reserved(start, size)) {
/* Could not reserve, skip it */
md->num_pages = 0;
memblock_dbg(PFX "Could not reserve boot range "
"[0x%010llx-0x%010llx]\n",
start, start+size-1);
} else
- memblock_x86_reserve_range(start, start+size,
- "EFI Boot");
+ memblock_reserve(start, size);
}
}
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index e36bf71..40e4469 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -39,43 +39,14 @@
*/
static unsigned long efi_rt_eflags;
-static pgd_t efi_bak_pg_dir_pointer[2];
void efi_call_phys_prelog(void)
{
- unsigned long cr4;
- unsigned long temp;
struct desc_ptr gdt_descr;
local_irq_save(efi_rt_eflags);
- /*
- * If I don't have PAE, I should just duplicate two entries in page
- * directory. If I have PAE, I just need to duplicate one entry in
- * page directory.
- */
- cr4 = read_cr4_safe();
-
- if (cr4 & X86_CR4_PAE) {
- efi_bak_pg_dir_pointer[0].pgd =
- swapper_pg_dir[pgd_index(0)].pgd;
- swapper_pg_dir[0].pgd =
- swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
- } else {
- efi_bak_pg_dir_pointer[0].pgd =
- swapper_pg_dir[pgd_index(0)].pgd;
- efi_bak_pg_dir_pointer[1].pgd =
- swapper_pg_dir[pgd_index(0x400000)].pgd;
- swapper_pg_dir[pgd_index(0)].pgd =
- swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
- temp = PAGE_OFFSET + 0x400000;
- swapper_pg_dir[pgd_index(0x400000)].pgd =
- swapper_pg_dir[pgd_index(temp)].pgd;
- }
-
- /*
- * After the lock is released, the original page table is restored.
- */
+ load_cr3(initial_page_table);
__flush_tlb_all();
gdt_descr.address = __pa(get_cpu_gdt_table(0));
@@ -85,28 +56,13 @@
void efi_call_phys_epilog(void)
{
- unsigned long cr4;
struct desc_ptr gdt_descr;
gdt_descr.address = (unsigned long)get_cpu_gdt_table(0);
gdt_descr.size = GDT_SIZE - 1;
load_gdt(&gdt_descr);
- cr4 = read_cr4_safe();
-
- if (cr4 & X86_CR4_PAE) {
- swapper_pg_dir[pgd_index(0)].pgd =
- efi_bak_pg_dir_pointer[0].pgd;
- } else {
- swapper_pg_dir[pgd_index(0)].pgd =
- efi_bak_pg_dir_pointer[0].pgd;
- swapper_pg_dir[pgd_index(0x400000)].pgd =
- efi_bak_pg_dir_pointer[1].pgd;
- }
-
- /*
- * After the lock is released, the original page table is restored.
- */
+ load_cr3(swapper_pg_dir);
__flush_tlb_all();
local_irq_restore(efi_rt_eflags);
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index b1489a0..ad4ec1c 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -76,6 +76,20 @@
EXPORT_SYMBOL_GPL(sfi_mrtc_array);
int sfi_mrtc_num;
+static void mrst_power_off(void)
+{
+ if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
+ intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1);
+}
+
+static void mrst_reboot(void)
+{
+ if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
+ intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
+ else
+ intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+}
+
/* parse all the mtimer info to a static mtimer array */
static int __init sfi_parse_mtmr(struct sfi_table_header *table)
{
@@ -265,17 +279,6 @@
return 0;
}
-/* Reboot and power off are handled by the SCU on a MID device */
-static void mrst_power_off(void)
-{
- intel_scu_ipc_simple_command(0xf1, 1);
-}
-
-static void mrst_reboot(void)
-{
- intel_scu_ipc_simple_command(0xf1, 0);
-}
-
/*
* Moorestown does not have external NMI source nor port 0x61 to report
* NMI status. The possible NMI sources are from pmu as a result of NMI
@@ -484,6 +487,46 @@
return max7315;
}
+static void *tca6416_platform_data(void *info)
+{
+ static struct pca953x_platform_data tca6416;
+ struct i2c_board_info *i2c_info = info;
+ int gpio_base, intr;
+ char base_pin_name[SFI_NAME_LEN + 1];
+ char intr_pin_name[SFI_NAME_LEN + 1];
+
+ strcpy(i2c_info->type, "tca6416");
+ strcpy(base_pin_name, "tca6416_base");
+ strcpy(intr_pin_name, "tca6416_int");
+
+ gpio_base = get_gpio_by_name(base_pin_name);
+ intr = get_gpio_by_name(intr_pin_name);
+
+ if (gpio_base == -1)
+ return NULL;
+ tca6416.gpio_base = gpio_base;
+ if (intr != -1) {
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
+ } else {
+ i2c_info->irq = -1;
+ tca6416.irq_base = -1;
+ }
+ return &tca6416;
+}
+
+static void *mpu3050_platform_data(void *info)
+{
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("mpu3050_int");
+
+ if (intr == -1)
+ return NULL;
+
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ return NULL;
+}
+
static void __init *emc1403_platform_data(void *info)
{
static short intr2nd_pdata;
@@ -646,12 +689,15 @@
static const struct devs_id __initconst device_ids[] = {
{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+ {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+ {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+ {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
/* MSIC subdevices */
{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
diff --git a/arch/x86/platform/uv/uv_sysfs.c b/arch/x86/platform/uv/uv_sysfs.c
index 309c70f..5d4ba30 100644
--- a/arch/x86/platform/uv/uv_sysfs.c
+++ b/arch/x86/platform/uv/uv_sysfs.c
@@ -19,7 +19,7 @@
* Copyright (c) Russ Anderson
*/
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <asm/uv/bios.h>
#include <asm/uv/uv.h>
diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile
index f820826..d511aa9 100644
--- a/arch/x86/tools/Makefile
+++ b/arch/x86/tools/Makefile
@@ -18,14 +18,21 @@
quiet_cmd_posttest = TEST $@
cmd_posttest = ($(OBJDUMP) -v | $(AWK) -f $(chkobjdump)) || $(OBJDUMP) -d -j .text $(objtree)/vmlinux | $(AWK) -f $(distill_awk) | $(obj)/test_get_len $(posttest_64bit) $(posttest_verbose)
-posttest: $(obj)/test_get_len vmlinux
- $(call cmd,posttest)
+quiet_cmd_sanitytest = TEST $@
+ cmd_sanitytest = $(obj)/insn_sanity $(posttest_64bit) -m 1000000
-hostprogs-y := test_get_len
+posttest: $(obj)/test_get_len vmlinux $(obj)/insn_sanity
+ $(call cmd,posttest)
+ $(call cmd,sanitytest)
+
+hostprogs-y += test_get_len insn_sanity
# -I needed for generated C source and C source which in the kernel tree.
HOSTCFLAGS_test_get_len.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/
+HOSTCFLAGS_insn_sanity.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/
+
# Dependencies are also needed.
$(obj)/test_get_len.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
+$(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk
index eaf11f5..5f6a5b6 100644
--- a/arch/x86/tools/gen-insn-attr-x86.awk
+++ b/arch/x86/tools/gen-insn-attr-x86.awk
@@ -47,7 +47,7 @@
sep_expr = "^\\|$"
group_expr = "^Grp[0-9A-Za-z]+"
- imm_expr = "^[IJAO][a-z]"
+ imm_expr = "^[IJAOL][a-z]"
imm_flag["Ib"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
imm_flag["Jb"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
imm_flag["Iw"] = "INAT_MAKE_IMM(INAT_IMM_WORD)"
@@ -59,6 +59,7 @@
imm_flag["Iv"] = "INAT_MAKE_IMM(INAT_IMM_VWORD)"
imm_flag["Ob"] = "INAT_MOFFSET"
imm_flag["Ov"] = "INAT_MOFFSET"
+ imm_flag["Lx"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
modrm_expr = "^([CDEGMNPQRSUVW/][a-z]+|NTA|T[012])"
force64_expr = "\\([df]64\\)"
@@ -70,8 +71,12 @@
lprefix3_expr = "\\(F2\\)"
max_lprefix = 4
- vexok_expr = "\\(VEX\\)"
- vexonly_expr = "\\(oVEX\\)"
+ # All opcodes starting with lower-case 'v' or with (v1) superscript
+ # accepts VEX prefix
+ vexok_opcode_expr = "^v.*"
+ vexok_expr = "\\(v1\\)"
+ # All opcodes with (v) superscript supports *only* VEX prefix
+ vexonly_expr = "\\(v\\)"
prefix_expr = "\\(Prefix\\)"
prefix_num["Operand-Size"] = "INAT_PFX_OPNDSZ"
@@ -85,8 +90,8 @@
prefix_num["SEG=GS"] = "INAT_PFX_GS"
prefix_num["SEG=SS"] = "INAT_PFX_SS"
prefix_num["Address-Size"] = "INAT_PFX_ADDRSZ"
- prefix_num["2bytes-VEX"] = "INAT_PFX_VEX2"
- prefix_num["3bytes-VEX"] = "INAT_PFX_VEX3"
+ prefix_num["VEX+1byte"] = "INAT_PFX_VEX2"
+ prefix_num["VEX+2byte"] = "INAT_PFX_VEX3"
clear_vars()
}
@@ -310,12 +315,10 @@
if (match(opcode, fpu_expr))
flags = add_flags(flags, "INAT_MODRM")
- # check VEX only code
+ # check VEX codes
if (match(ext, vexonly_expr))
flags = add_flags(flags, "INAT_VEXOK | INAT_VEXONLY")
-
- # check VEX only code
- if (match(ext, vexok_expr))
+ else if (match(ext, vexok_expr) || match(opcode, vexok_opcode_expr))
flags = add_flags(flags, "INAT_VEXOK")
# check prefixes
diff --git a/arch/x86/tools/insn_sanity.c b/arch/x86/tools/insn_sanity.c
new file mode 100644
index 0000000..cc2f8c1
--- /dev/null
+++ b/arch/x86/tools/insn_sanity.c
@@ -0,0 +1,275 @@
+/*
+ * x86 decoder sanity test - based on test_get_insn.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ * Copyright (C) Hitachi, Ltd., 2011
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+
+#define unlikely(cond) (cond)
+#define ARRAY_SIZE(a) (sizeof(a)/sizeof(a[0]))
+
+#include <asm/insn.h>
+#include <inat.c>
+#include <insn.c>
+
+/*
+ * Test of instruction analysis against tampering.
+ * Feed random binary to instruction decoder and ensure not to
+ * access out-of-instruction-buffer.
+ */
+
+#define DEFAULT_MAX_ITER 10000
+#define INSN_NOP 0x90
+
+static const char *prog; /* Program name */
+static int verbose; /* Verbosity */
+static int x86_64; /* x86-64 bit mode flag */
+static unsigned int seed; /* Random seed */
+static unsigned long iter_start; /* Start of iteration number */
+static unsigned long iter_end = DEFAULT_MAX_ITER; /* End of iteration number */
+static FILE *input_file; /* Input file name */
+
+static void usage(const char *err)
+{
+ if (err)
+ fprintf(stderr, "Error: %s\n\n", err);
+ fprintf(stderr, "Usage: %s [-y|-n|-v] [-s seed[,no]] [-m max] [-i input]\n", prog);
+ fprintf(stderr, "\t-y 64bit mode\n");
+ fprintf(stderr, "\t-n 32bit mode\n");
+ fprintf(stderr, "\t-v Verbosity(-vv dumps any decoded result)\n");
+ fprintf(stderr, "\t-s Give a random seed (and iteration number)\n");
+ fprintf(stderr, "\t-m Give a maximum iteration number\n");
+ fprintf(stderr, "\t-i Give an input file with decoded binary\n");
+ exit(1);
+}
+
+static void dump_field(FILE *fp, const char *name, const char *indent,
+ struct insn_field *field)
+{
+ fprintf(fp, "%s.%s = {\n", indent, name);
+ fprintf(fp, "%s\t.value = %d, bytes[] = {%x, %x, %x, %x},\n",
+ indent, field->value, field->bytes[0], field->bytes[1],
+ field->bytes[2], field->bytes[3]);
+ fprintf(fp, "%s\t.got = %d, .nbytes = %d},\n", indent,
+ field->got, field->nbytes);
+}
+
+static void dump_insn(FILE *fp, struct insn *insn)
+{
+ fprintf(fp, "Instruction = {\n");
+ dump_field(fp, "prefixes", "\t", &insn->prefixes);
+ dump_field(fp, "rex_prefix", "\t", &insn->rex_prefix);
+ dump_field(fp, "vex_prefix", "\t", &insn->vex_prefix);
+ dump_field(fp, "opcode", "\t", &insn->opcode);
+ dump_field(fp, "modrm", "\t", &insn->modrm);
+ dump_field(fp, "sib", "\t", &insn->sib);
+ dump_field(fp, "displacement", "\t", &insn->displacement);
+ dump_field(fp, "immediate1", "\t", &insn->immediate1);
+ dump_field(fp, "immediate2", "\t", &insn->immediate2);
+ fprintf(fp, "\t.attr = %x, .opnd_bytes = %d, .addr_bytes = %d,\n",
+ insn->attr, insn->opnd_bytes, insn->addr_bytes);
+ fprintf(fp, "\t.length = %d, .x86_64 = %d, .kaddr = %p}\n",
+ insn->length, insn->x86_64, insn->kaddr);
+}
+
+static void dump_stream(FILE *fp, const char *msg, unsigned long nr_iter,
+ unsigned char *insn_buf, struct insn *insn)
+{
+ int i;
+
+ fprintf(fp, "%s:\n", msg);
+
+ dump_insn(fp, insn);
+
+ fprintf(fp, "You can reproduce this with below command(s);\n");
+
+ /* Input a decoded instruction sequence directly */
+ fprintf(fp, " $ echo ");
+ for (i = 0; i < MAX_INSN_SIZE; i++)
+ fprintf(fp, " %02x", insn_buf[i]);
+ fprintf(fp, " | %s -i -\n", prog);
+
+ if (!input_file) {
+ fprintf(fp, "Or \n");
+ /* Give a seed and iteration number */
+ fprintf(fp, " $ %s -s 0x%x,%lu\n", prog, seed, nr_iter);
+ }
+}
+
+static void init_random_seed(void)
+{
+ int fd;
+
+ fd = open("/dev/urandom", O_RDONLY);
+ if (fd < 0)
+ goto fail;
+
+ if (read(fd, &seed, sizeof(seed)) != sizeof(seed))
+ goto fail;
+
+ close(fd);
+ return;
+fail:
+ usage("Failed to open /dev/urandom");
+}
+
+/* Read given instruction sequence from the input file */
+static int read_next_insn(unsigned char *insn_buf)
+{
+ char buf[256] = "", *tmp;
+ int i;
+
+ tmp = fgets(buf, ARRAY_SIZE(buf), input_file);
+ if (tmp == NULL || feof(input_file))
+ return 0;
+
+ for (i = 0; i < MAX_INSN_SIZE; i++) {
+ insn_buf[i] = (unsigned char)strtoul(tmp, &tmp, 16);
+ if (*tmp != ' ')
+ break;
+ }
+
+ return i;
+}
+
+static int generate_insn(unsigned char *insn_buf)
+{
+ int i;
+
+ if (input_file)
+ return read_next_insn(insn_buf);
+
+ /* Fills buffer with random binary up to MAX_INSN_SIZE */
+ for (i = 0; i < MAX_INSN_SIZE - 1; i += 2)
+ *(unsigned short *)(&insn_buf[i]) = random() & 0xffff;
+
+ while (i < MAX_INSN_SIZE)
+ insn_buf[i++] = random() & 0xff;
+
+ return i;
+}
+
+static void parse_args(int argc, char **argv)
+{
+ int c;
+ char *tmp = NULL;
+ int set_seed = 0;
+
+ prog = argv[0];
+ while ((c = getopt(argc, argv, "ynvs:m:i:")) != -1) {
+ switch (c) {
+ case 'y':
+ x86_64 = 1;
+ break;
+ case 'n':
+ x86_64 = 0;
+ break;
+ case 'v':
+ verbose++;
+ break;
+ case 'i':
+ if (strcmp("-", optarg) == 0)
+ input_file = stdin;
+ else
+ input_file = fopen(optarg, "r");
+ if (!input_file)
+ usage("Failed to open input file");
+ break;
+ case 's':
+ seed = (unsigned int)strtoul(optarg, &tmp, 0);
+ if (*tmp == ',') {
+ optarg = tmp + 1;
+ iter_start = strtoul(optarg, &tmp, 0);
+ }
+ if (*tmp != '\0' || tmp == optarg)
+ usage("Failed to parse seed");
+ set_seed = 1;
+ break;
+ case 'm':
+ iter_end = strtoul(optarg, &tmp, 0);
+ if (*tmp != '\0' || tmp == optarg)
+ usage("Failed to parse max_iter");
+ break;
+ default:
+ usage(NULL);
+ }
+ }
+
+ /* Check errors */
+ if (iter_end < iter_start)
+ usage("Max iteration number must be bigger than iter-num");
+
+ if (set_seed && input_file)
+ usage("Don't use input file (-i) with random seed (-s)");
+
+ /* Initialize random seed */
+ if (!input_file) {
+ if (!set_seed) /* No seed is given */
+ init_random_seed();
+ srand(seed);
+ }
+}
+
+int main(int argc, char **argv)
+{
+ struct insn insn;
+ int insns = 0;
+ int errors = 0;
+ unsigned long i;
+ unsigned char insn_buf[MAX_INSN_SIZE * 2];
+
+ parse_args(argc, argv);
+
+ /* Prepare stop bytes with NOPs */
+ memset(insn_buf + MAX_INSN_SIZE, INSN_NOP, MAX_INSN_SIZE);
+
+ for (i = 0; i < iter_end; i++) {
+ if (generate_insn(insn_buf) <= 0)
+ break;
+
+ if (i < iter_start) /* Skip to given iteration number */
+ continue;
+
+ /* Decode an instruction */
+ insn_init(&insn, insn_buf, x86_64);
+ insn_get_length(&insn);
+
+ if (insn.next_byte <= insn.kaddr ||
+ insn.kaddr + MAX_INSN_SIZE < insn.next_byte) {
+ /* Access out-of-range memory */
+ dump_stream(stderr, "Error: Found an access violation", i, insn_buf, &insn);
+ errors++;
+ } else if (verbose && !insn_complete(&insn))
+ dump_stream(stdout, "Info: Found an undecodable input", i, insn_buf, &insn);
+ else if (verbose >= 2)
+ dump_insn(stdout, &insn);
+ insns++;
+ }
+
+ fprintf(stdout, "%s: decoded and checked %d %s instructions with %d errors (seed:0x%x)\n", (errors) ? "Failure" : "Success", insns, (input_file) ? "given" : "random", errors, seed);
+
+ return errors ? 1 : 0;
+}
diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c
index 7c0fedd..ef1db19 100644
--- a/arch/x86/xen/debugfs.c
+++ b/arch/x86/xen/debugfs.c
@@ -109,7 +109,7 @@
.llseek = no_llseek,
};
-struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode,
+struct dentry *xen_debugfs_create_u32_array(const char *name, umode_t mode,
struct dentry *parent,
u32 *array, unsigned elements)
{
diff --git a/arch/x86/xen/debugfs.h b/arch/x86/xen/debugfs.h
index e281320..78d2549 100644
--- a/arch/x86/xen/debugfs.h
+++ b/arch/x86/xen/debugfs.h
@@ -3,7 +3,7 @@
struct dentry * __init xen_init_debugfs(void);
-struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode,
+struct dentry *xen_debugfs_create_u32_array(const char *name, umode_t mode,
struct dentry *parent,
u32 *array, unsigned elements);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 1f92865..12eb07b 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1215,8 +1215,6 @@
local_irq_disable();
early_boot_irqs_disabled = true;
- memblock_init();
-
xen_raw_console_write("mapping kernel into physical memory\n");
pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
xen_ident_map_ISA();
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 87f6673..f4bf8aa 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1774,10 +1774,8 @@
__xen_write_cr3(true, __pa(pgd));
xen_mc_issue(PARAVIRT_LAZY_CPU);
- memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
- __pa(xen_start_info->pt_base +
- xen_start_info->nr_pt_frames * PAGE_SIZE),
- "XEN PAGETABLES");
+ memblock_reserve(__pa(xen_start_info->pt_base),
+ xen_start_info->nr_pt_frames * PAGE_SIZE);
return pgd;
}
@@ -1853,10 +1851,8 @@
PFN_DOWN(__pa(initial_page_table)));
xen_write_cr3(__pa(initial_page_table));
- memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
- __pa(xen_start_info->pt_base +
- xen_start_info->nr_pt_frames * PAGE_SIZE),
- "XEN PAGETABLES");
+ memblock_reserve(__pa(xen_start_info->pt_base),
+ xen_start_info->nr_pt_frames * PAGE_SIZE));
return initial_page_table;
}
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 38d0af4..e03c636 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -75,7 +75,7 @@
if (i == XEN_EXTRA_MEM_MAX_REGIONS)
printk(KERN_WARNING "Warning: not enough extra memory regions\n");
- memblock_x86_reserve_range(start, start + size, "XEN EXTRA");
+ memblock_reserve(start, size);
xen_max_p2m_pfn = PFN_DOWN(start + size);
@@ -173,9 +173,21 @@
domid_t domid = DOMID_SELF;
int ret;
- ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
- if (ret > 0)
- max_pages = ret;
+ /*
+ * For the initial domain we use the maximum reservation as
+ * the maximum page.
+ *
+ * For guest domains the current maximum reservation reflects
+ * the current maximum rather than the static maximum. In this
+ * case the e820 map provided to us will cover the static
+ * maximum region.
+ */
+ if (xen_initial_domain()) {
+ ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
+ if (ret > 0)
+ max_pages = ret;
+ }
+
return min(max_pages, MAX_DOMAIN_PAGES);
}
@@ -299,9 +311,8 @@
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
*/
- memblock_x86_reserve_range(__pa(xen_start_info->mfn_list),
- __pa(xen_start_info->pt_base),
- "XEN START INFO");
+ memblock_reserve(__pa(xen_start_info->mfn_list),
+ xen_start_info->pt_base - xen_start_info->mfn_list);
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
@@ -410,6 +421,6 @@
#endif
disable_cpuidle();
boot_option_idle_override = IDLE_HALT;
-
+ WARN_ON(set_pm_idle_to_default());
fiddle_vdso();
}
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index cbdf2ff..bb06968 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -73,4 +73,7 @@
#define SO_RXQ_OVFL 40
+#define SO_WIFI_STATUS 41
+#define SCM_WIFI_STATUS SO_WIFI_STATUS
+
#endif /* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 7be8acc..6abbedd 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -132,7 +132,6 @@
#define TIF_MEMDIE 5 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */
#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_FREEZE 17 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
@@ -141,7 +140,6 @@
#define _TIF_IRET (1<<TIF_IRET)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
diff --git a/arch/xtensa/include/asm/types.h b/arch/xtensa/include/asm/types.h
index b1c981e..6d4db7e 100644
--- a/arch/xtensa/include/asm/types.h
+++ b/arch/xtensa/include/asm/types.h
@@ -23,8 +23,6 @@
#ifndef __ASSEMBLY__
-typedef unsigned short umode_t;
-
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index f3e5eb4..ac62f9c 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -41,14 +41,6 @@
.rating = 200,
.read = ccount_read,
.mask = CLOCKSOURCE_MASK(32),
- /*
- * With a shift of 22 the lower limit of the cpu clock is
- * 1MHz, where NSEC_PER_CCOUNT is 1000 or a bit less than
- * 2^10: Since we have 32 bits and the multiplicator can
- * already take up as much as 10 bits, this leaves us with
- * remaining upper 22 bits.
- */
- .shift = 22,
};
static irqreturn_t timer_interrupt(int irq, void *dev_id);
@@ -66,10 +58,7 @@
printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
(int)(ccount_per_jiffy/(10000/HZ))%100);
#endif
- ccount_clocksource.mult =
- clocksource_hz2mult(CCOUNT_PER_JIFFY * HZ,
- ccount_clocksource.shift);
- clocksource_register(&ccount_clocksource);
+ clocksource_register_hz(&ccount_clocksource, CCOUNT_PER_JIFFY * HZ);
/* Initialize the linux timer interrupt. */