| /* | 
 |  * Network device driver for the MACE ethernet controller on | 
 |  * Apple Powermacs.  Assumes it's under a DBDMA controller. | 
 |  * | 
 |  * Copyright (C) 1996 Paul Mackerras. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/string.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/init.h> | 
 | #include <linux/crc32.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/bitrev.h> | 
 | #include <asm/prom.h> | 
 | #include <asm/dbdma.h> | 
 | #include <asm/io.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/macio.h> | 
 |  | 
 | #include "mace.h" | 
 |  | 
 | static int port_aaui = -1; | 
 |  | 
 | #define N_RX_RING	8 | 
 | #define N_TX_RING	6 | 
 | #define MAX_TX_ACTIVE	1 | 
 | #define NCMDS_TX	1	/* dma commands per element in tx ring */ | 
 | #define RX_BUFLEN	(ETH_FRAME_LEN + 8) | 
 | #define TX_TIMEOUT	HZ	/* 1 second */ | 
 |  | 
 | /* Chip rev needs workaround on HW & multicast addr change */ | 
 | #define BROKEN_ADDRCHG_REV	0x0941 | 
 |  | 
 | /* Bits in transmit DMA status */ | 
 | #define TX_DMA_ERR	0x80 | 
 |  | 
 | struct mace_data { | 
 |     volatile struct mace __iomem *mace; | 
 |     volatile struct dbdma_regs __iomem *tx_dma; | 
 |     int tx_dma_intr; | 
 |     volatile struct dbdma_regs __iomem *rx_dma; | 
 |     int rx_dma_intr; | 
 |     volatile struct dbdma_cmd *tx_cmds;	/* xmit dma command list */ | 
 |     volatile struct dbdma_cmd *rx_cmds;	/* recv dma command list */ | 
 |     struct sk_buff *rx_bufs[N_RX_RING]; | 
 |     int rx_fill; | 
 |     int rx_empty; | 
 |     struct sk_buff *tx_bufs[N_TX_RING]; | 
 |     int tx_fill; | 
 |     int tx_empty; | 
 |     unsigned char maccc; | 
 |     unsigned char tx_fullup; | 
 |     unsigned char tx_active; | 
 |     unsigned char tx_bad_runt; | 
 |     struct net_device_stats stats; | 
 |     struct timer_list tx_timeout; | 
 |     int timeout_active; | 
 |     int port_aaui; | 
 |     int chipid; | 
 |     struct macio_dev *mdev; | 
 |     spinlock_t lock; | 
 | }; | 
 |  | 
 | /* | 
 |  * Number of bytes of private data per MACE: allow enough for | 
 |  * the rx and tx dma commands plus a branch dma command each, | 
 |  * and another 16 bytes to allow us to align the dma command | 
 |  * buffers on a 16 byte boundary. | 
 |  */ | 
 | #define PRIV_BYTES	(sizeof(struct mace_data) \ | 
 | 	+ (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd)) | 
 |  | 
 | static int mace_open(struct net_device *dev); | 
 | static int mace_close(struct net_device *dev); | 
 | static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev); | 
 | static struct net_device_stats *mace_stats(struct net_device *dev); | 
 | static void mace_set_multicast(struct net_device *dev); | 
 | static void mace_reset(struct net_device *dev); | 
 | static int mace_set_address(struct net_device *dev, void *addr); | 
 | static irqreturn_t mace_interrupt(int irq, void *dev_id); | 
 | static irqreturn_t mace_txdma_intr(int irq, void *dev_id); | 
 | static irqreturn_t mace_rxdma_intr(int irq, void *dev_id); | 
 | static void mace_set_timeout(struct net_device *dev); | 
 | static void mace_tx_timeout(unsigned long data); | 
 | static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma); | 
 | static inline void mace_clean_rings(struct mace_data *mp); | 
 | static void __mace_set_address(struct net_device *dev, void *addr); | 
 |  | 
 | /* | 
 |  * If we can't get a skbuff when we need it, we use this area for DMA. | 
 |  */ | 
 | static unsigned char *dummy_buf; | 
 |  | 
 | static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_id *match) | 
 | { | 
 | 	struct device_node *mace = macio_get_of_node(mdev); | 
 | 	struct net_device *dev; | 
 | 	struct mace_data *mp; | 
 | 	const unsigned char *addr; | 
 | 	int j, rev, rc = -EBUSY; | 
 |  | 
 | 	if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) { | 
 | 		printk(KERN_ERR "can't use MACE %s: need 3 addrs and 3 irqs\n", | 
 | 		       mace->full_name); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	addr = get_property(mace, "mac-address", NULL); | 
 | 	if (addr == NULL) { | 
 | 		addr = get_property(mace, "local-mac-address", NULL); | 
 | 		if (addr == NULL) { | 
 | 			printk(KERN_ERR "Can't get mac-address for MACE %s\n", | 
 | 			       mace->full_name); | 
 | 			return -ENODEV; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * lazy allocate the driver-wide dummy buffer. (Note that we | 
 | 	 * never have more than one MACE in the system anyway) | 
 | 	 */ | 
 | 	if (dummy_buf == NULL) { | 
 | 		dummy_buf = kmalloc(RX_BUFLEN+2, GFP_KERNEL); | 
 | 		if (dummy_buf == NULL) { | 
 | 			printk(KERN_ERR "MACE: couldn't allocate dummy buffer\n"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (macio_request_resources(mdev, "mace")) { | 
 | 		printk(KERN_ERR "MACE: can't request IO resources !\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	dev = alloc_etherdev(PRIV_BYTES); | 
 | 	if (!dev) { | 
 | 		printk(KERN_ERR "MACE: can't allocate ethernet device !\n"); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_release; | 
 | 	} | 
 | 	SET_MODULE_OWNER(dev); | 
 | 	SET_NETDEV_DEV(dev, &mdev->ofdev.dev); | 
 |  | 
 | 	mp = dev->priv; | 
 | 	mp->mdev = mdev; | 
 | 	macio_set_drvdata(mdev, dev); | 
 |  | 
 | 	dev->base_addr = macio_resource_start(mdev, 0); | 
 | 	mp->mace = ioremap(dev->base_addr, 0x1000); | 
 | 	if (mp->mace == NULL) { | 
 | 		printk(KERN_ERR "MACE: can't map IO resources !\n"); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_free; | 
 | 	} | 
 | 	dev->irq = macio_irq(mdev, 0); | 
 |  | 
 | 	rev = addr[0] == 0 && addr[1] == 0xA0; | 
 | 	for (j = 0; j < 6; ++j) { | 
 | 		dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j]; | 
 | 	} | 
 | 	mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) | | 
 | 			in_8(&mp->mace->chipid_lo); | 
 |  | 
 |  | 
 | 	mp = (struct mace_data *) dev->priv; | 
 | 	mp->maccc = ENXMT | ENRCV; | 
 |  | 
 | 	mp->tx_dma = ioremap(macio_resource_start(mdev, 1), 0x1000); | 
 | 	if (mp->tx_dma == NULL) { | 
 | 		printk(KERN_ERR "MACE: can't map TX DMA resources !\n"); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_unmap_io; | 
 | 	} | 
 | 	mp->tx_dma_intr = macio_irq(mdev, 1); | 
 |  | 
 | 	mp->rx_dma = ioremap(macio_resource_start(mdev, 2), 0x1000); | 
 | 	if (mp->rx_dma == NULL) { | 
 | 		printk(KERN_ERR "MACE: can't map RX DMA resources !\n"); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_unmap_tx_dma; | 
 | 	} | 
 | 	mp->rx_dma_intr = macio_irq(mdev, 2); | 
 |  | 
 | 	mp->tx_cmds = (volatile struct dbdma_cmd *) DBDMA_ALIGN(mp + 1); | 
 | 	mp->rx_cmds = mp->tx_cmds + NCMDS_TX * N_TX_RING + 1; | 
 |  | 
 | 	memset(&mp->stats, 0, sizeof(mp->stats)); | 
 | 	memset((char *) mp->tx_cmds, 0, | 
 | 	       (NCMDS_TX*N_TX_RING + N_RX_RING + 2) * sizeof(struct dbdma_cmd)); | 
 | 	init_timer(&mp->tx_timeout); | 
 | 	spin_lock_init(&mp->lock); | 
 | 	mp->timeout_active = 0; | 
 |  | 
 | 	if (port_aaui >= 0) | 
 | 		mp->port_aaui = port_aaui; | 
 | 	else { | 
 | 		/* Apple Network Server uses the AAUI port */ | 
 | 		if (machine_is_compatible("AAPL,ShinerESB")) | 
 | 			mp->port_aaui = 1; | 
 | 		else { | 
 | #ifdef CONFIG_MACE_AAUI_PORT | 
 | 			mp->port_aaui = 1; | 
 | #else | 
 | 			mp->port_aaui = 0; | 
 | #endif | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dev->open = mace_open; | 
 | 	dev->stop = mace_close; | 
 | 	dev->hard_start_xmit = mace_xmit_start; | 
 | 	dev->get_stats = mace_stats; | 
 | 	dev->set_multicast_list = mace_set_multicast; | 
 | 	dev->set_mac_address = mace_set_address; | 
 |  | 
 | 	/* | 
 | 	 * Most of what is below could be moved to mace_open() | 
 | 	 */ | 
 | 	mace_reset(dev); | 
 |  | 
 | 	rc = request_irq(dev->irq, mace_interrupt, 0, "MACE", dev); | 
 | 	if (rc) { | 
 | 		printk(KERN_ERR "MACE: can't get irq %d\n", dev->irq); | 
 | 		goto err_unmap_rx_dma; | 
 | 	} | 
 | 	rc = request_irq(mp->tx_dma_intr, mace_txdma_intr, 0, "MACE-txdma", dev); | 
 | 	if (rc) { | 
 | 		printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr); | 
 | 		goto err_free_irq; | 
 | 	} | 
 | 	rc = request_irq(mp->rx_dma_intr, mace_rxdma_intr, 0, "MACE-rxdma", dev); | 
 | 	if (rc) { | 
 | 		printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr); | 
 | 		goto err_free_tx_irq; | 
 | 	} | 
 |  | 
 | 	rc = register_netdev(dev); | 
 | 	if (rc) { | 
 | 		printk(KERN_ERR "MACE: Cannot register net device, aborting.\n"); | 
 | 		goto err_free_rx_irq; | 
 | 	} | 
 |  | 
 | 	printk(KERN_INFO "%s: MACE at", dev->name); | 
 | 	for (j = 0; j < 6; ++j) { | 
 | 		printk("%c%.2x", (j? ':': ' '), dev->dev_addr[j]); | 
 | 	} | 
 | 	printk(", chip revision %d.%d\n", mp->chipid >> 8, mp->chipid & 0xff); | 
 |  | 
 | 	return 0; | 
 |  | 
 |  err_free_rx_irq: | 
 | 	free_irq(macio_irq(mdev, 2), dev); | 
 |  err_free_tx_irq: | 
 | 	free_irq(macio_irq(mdev, 1), dev); | 
 |  err_free_irq: | 
 | 	free_irq(macio_irq(mdev, 0), dev); | 
 |  err_unmap_rx_dma: | 
 | 	iounmap(mp->rx_dma); | 
 |  err_unmap_tx_dma: | 
 | 	iounmap(mp->tx_dma); | 
 |  err_unmap_io: | 
 | 	iounmap(mp->mace); | 
 |  err_free: | 
 | 	free_netdev(dev); | 
 |  err_release: | 
 | 	macio_release_resources(mdev); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int __devexit mace_remove(struct macio_dev *mdev) | 
 | { | 
 | 	struct net_device *dev = macio_get_drvdata(mdev); | 
 | 	struct mace_data *mp; | 
 |  | 
 | 	BUG_ON(dev == NULL); | 
 |  | 
 | 	macio_set_drvdata(mdev, NULL); | 
 |  | 
 | 	mp = dev->priv; | 
 |  | 
 | 	unregister_netdev(dev); | 
 |  | 
 | 	free_irq(dev->irq, dev); | 
 | 	free_irq(mp->tx_dma_intr, dev); | 
 | 	free_irq(mp->rx_dma_intr, dev); | 
 |  | 
 | 	iounmap(mp->rx_dma); | 
 | 	iounmap(mp->tx_dma); | 
 | 	iounmap(mp->mace); | 
 |  | 
 | 	free_netdev(dev); | 
 |  | 
 | 	macio_release_resources(mdev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dbdma_reset(volatile struct dbdma_regs __iomem *dma) | 
 | { | 
 |     int i; | 
 |  | 
 |     out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16); | 
 |  | 
 |     /* | 
 |      * Yes this looks peculiar, but apparently it needs to be this | 
 |      * way on some machines. | 
 |      */ | 
 |     for (i = 200; i > 0; --i) | 
 | 	if (ld_le32(&dma->control) & RUN) | 
 | 	    udelay(1); | 
 | } | 
 |  | 
 | static void mace_reset(struct net_device *dev) | 
 | { | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     int i; | 
 |  | 
 |     /* soft-reset the chip */ | 
 |     i = 200; | 
 |     while (--i) { | 
 | 	out_8(&mb->biucc, SWRST); | 
 | 	if (in_8(&mb->biucc) & SWRST) { | 
 | 	    udelay(10); | 
 | 	    continue; | 
 | 	} | 
 | 	break; | 
 |     } | 
 |     if (!i) { | 
 | 	printk(KERN_ERR "mace: cannot reset chip!\n"); | 
 | 	return; | 
 |     } | 
 |  | 
 |     out_8(&mb->imr, 0xff);	/* disable all intrs for now */ | 
 |     i = in_8(&mb->ir); | 
 |     out_8(&mb->maccc, 0);	/* turn off tx, rx */ | 
 |  | 
 |     out_8(&mb->biucc, XMTSP_64); | 
 |     out_8(&mb->utr, RTRD); | 
 |     out_8(&mb->fifocc, RCVFW_32 | XMTFW_16 | XMTFWU | RCVFWU | XMTBRST); | 
 |     out_8(&mb->xmtfc, AUTO_PAD_XMIT); /* auto-pad short frames */ | 
 |     out_8(&mb->rcvfc, 0); | 
 |  | 
 |     /* load up the hardware address */ | 
 |     __mace_set_address(dev, dev->dev_addr); | 
 |  | 
 |     /* clear the multicast filter */ | 
 |     if (mp->chipid == BROKEN_ADDRCHG_REV) | 
 | 	out_8(&mb->iac, LOGADDR); | 
 |     else { | 
 | 	out_8(&mb->iac, ADDRCHG | LOGADDR); | 
 | 	while ((in_8(&mb->iac) & ADDRCHG) != 0) | 
 | 		; | 
 |     } | 
 |     for (i = 0; i < 8; ++i) | 
 | 	out_8(&mb->ladrf, 0); | 
 |  | 
 |     /* done changing address */ | 
 |     if (mp->chipid != BROKEN_ADDRCHG_REV) | 
 | 	out_8(&mb->iac, 0); | 
 |  | 
 |     if (mp->port_aaui) | 
 |     	out_8(&mb->plscc, PORTSEL_AUI + ENPLSIO); | 
 |     else | 
 |     	out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO); | 
 | } | 
 |  | 
 | static void __mace_set_address(struct net_device *dev, void *addr) | 
 | { | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     unsigned char *p = addr; | 
 |     int i; | 
 |  | 
 |     /* load up the hardware address */ | 
 |     if (mp->chipid == BROKEN_ADDRCHG_REV) | 
 |     	out_8(&mb->iac, PHYADDR); | 
 |     else { | 
 |     	out_8(&mb->iac, ADDRCHG | PHYADDR); | 
 | 	while ((in_8(&mb->iac) & ADDRCHG) != 0) | 
 | 	    ; | 
 |     } | 
 |     for (i = 0; i < 6; ++i) | 
 | 	out_8(&mb->padr, dev->dev_addr[i] = p[i]); | 
 |     if (mp->chipid != BROKEN_ADDRCHG_REV) | 
 |         out_8(&mb->iac, 0); | 
 | } | 
 |  | 
 | static int mace_set_address(struct net_device *dev, void *addr) | 
 | { | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     unsigned long flags; | 
 |  | 
 |     spin_lock_irqsave(&mp->lock, flags); | 
 |  | 
 |     __mace_set_address(dev, addr); | 
 |  | 
 |     /* note: setting ADDRCHG clears ENRCV */ | 
 |     out_8(&mb->maccc, mp->maccc); | 
 |  | 
 |     spin_unlock_irqrestore(&mp->lock, flags); | 
 |     return 0; | 
 | } | 
 |  | 
 | static inline void mace_clean_rings(struct mace_data *mp) | 
 | { | 
 |     int i; | 
 |  | 
 |     /* free some skb's */ | 
 |     for (i = 0; i < N_RX_RING; ++i) { | 
 | 	if (mp->rx_bufs[i] != 0) { | 
 | 	    dev_kfree_skb(mp->rx_bufs[i]); | 
 | 	    mp->rx_bufs[i] = NULL; | 
 | 	} | 
 |     } | 
 |     for (i = mp->tx_empty; i != mp->tx_fill; ) { | 
 | 	dev_kfree_skb(mp->tx_bufs[i]); | 
 | 	if (++i >= N_TX_RING) | 
 | 	    i = 0; | 
 |     } | 
 | } | 
 |  | 
 | static int mace_open(struct net_device *dev) | 
 | { | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     volatile struct dbdma_regs __iomem *rd = mp->rx_dma; | 
 |     volatile struct dbdma_regs __iomem *td = mp->tx_dma; | 
 |     volatile struct dbdma_cmd *cp; | 
 |     int i; | 
 |     struct sk_buff *skb; | 
 |     unsigned char *data; | 
 |  | 
 |     /* reset the chip */ | 
 |     mace_reset(dev); | 
 |  | 
 |     /* initialize list of sk_buffs for receiving and set up recv dma */ | 
 |     mace_clean_rings(mp); | 
 |     memset((char *)mp->rx_cmds, 0, N_RX_RING * sizeof(struct dbdma_cmd)); | 
 |     cp = mp->rx_cmds; | 
 |     for (i = 0; i < N_RX_RING - 1; ++i) { | 
 | 	skb = dev_alloc_skb(RX_BUFLEN + 2); | 
 | 	if (skb == 0) { | 
 | 	    data = dummy_buf; | 
 | 	} else { | 
 | 	    skb_reserve(skb, 2);	/* so IP header lands on 4-byte bdry */ | 
 | 	    data = skb->data; | 
 | 	} | 
 | 	mp->rx_bufs[i] = skb; | 
 | 	st_le16(&cp->req_count, RX_BUFLEN); | 
 | 	st_le16(&cp->command, INPUT_LAST + INTR_ALWAYS); | 
 | 	st_le32(&cp->phy_addr, virt_to_bus(data)); | 
 | 	cp->xfer_status = 0; | 
 | 	++cp; | 
 |     } | 
 |     mp->rx_bufs[i] = NULL; | 
 |     st_le16(&cp->command, DBDMA_STOP); | 
 |     mp->rx_fill = i; | 
 |     mp->rx_empty = 0; | 
 |  | 
 |     /* Put a branch back to the beginning of the receive command list */ | 
 |     ++cp; | 
 |     st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS); | 
 |     st_le32(&cp->cmd_dep, virt_to_bus(mp->rx_cmds)); | 
 |  | 
 |     /* start rx dma */ | 
 |     out_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ | 
 |     out_le32(&rd->cmdptr, virt_to_bus(mp->rx_cmds)); | 
 |     out_le32(&rd->control, (RUN << 16) | RUN); | 
 |  | 
 |     /* put a branch at the end of the tx command list */ | 
 |     cp = mp->tx_cmds + NCMDS_TX * N_TX_RING; | 
 |     st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS); | 
 |     st_le32(&cp->cmd_dep, virt_to_bus(mp->tx_cmds)); | 
 |  | 
 |     /* reset tx dma */ | 
 |     out_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16); | 
 |     out_le32(&td->cmdptr, virt_to_bus(mp->tx_cmds)); | 
 |     mp->tx_fill = 0; | 
 |     mp->tx_empty = 0; | 
 |     mp->tx_fullup = 0; | 
 |     mp->tx_active = 0; | 
 |     mp->tx_bad_runt = 0; | 
 |  | 
 |     /* turn it on! */ | 
 |     out_8(&mb->maccc, mp->maccc); | 
 |     /* enable all interrupts except receive interrupts */ | 
 |     out_8(&mb->imr, RCVINT); | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static int mace_close(struct net_device *dev) | 
 | { | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     volatile struct dbdma_regs __iomem *rd = mp->rx_dma; | 
 |     volatile struct dbdma_regs __iomem *td = mp->tx_dma; | 
 |  | 
 |     /* disable rx and tx */ | 
 |     out_8(&mb->maccc, 0); | 
 |     out_8(&mb->imr, 0xff);		/* disable all intrs */ | 
 |  | 
 |     /* disable rx and tx dma */ | 
 |     st_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ | 
 |     st_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */ | 
 |  | 
 |     mace_clean_rings(mp); | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static inline void mace_set_timeout(struct net_device *dev) | 
 | { | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |  | 
 |     if (mp->timeout_active) | 
 | 	del_timer(&mp->tx_timeout); | 
 |     mp->tx_timeout.expires = jiffies + TX_TIMEOUT; | 
 |     mp->tx_timeout.function = mace_tx_timeout; | 
 |     mp->tx_timeout.data = (unsigned long) dev; | 
 |     add_timer(&mp->tx_timeout); | 
 |     mp->timeout_active = 1; | 
 | } | 
 |  | 
 | static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct dbdma_regs __iomem *td = mp->tx_dma; | 
 |     volatile struct dbdma_cmd *cp, *np; | 
 |     unsigned long flags; | 
 |     int fill, next, len; | 
 |  | 
 |     /* see if there's a free slot in the tx ring */ | 
 |     spin_lock_irqsave(&mp->lock, flags); | 
 |     fill = mp->tx_fill; | 
 |     next = fill + 1; | 
 |     if (next >= N_TX_RING) | 
 | 	next = 0; | 
 |     if (next == mp->tx_empty) { | 
 | 	netif_stop_queue(dev); | 
 | 	mp->tx_fullup = 1; | 
 | 	spin_unlock_irqrestore(&mp->lock, flags); | 
 | 	return 1;		/* can't take it at the moment */ | 
 |     } | 
 |     spin_unlock_irqrestore(&mp->lock, flags); | 
 |  | 
 |     /* partially fill in the dma command block */ | 
 |     len = skb->len; | 
 |     if (len > ETH_FRAME_LEN) { | 
 | 	printk(KERN_DEBUG "mace: xmit frame too long (%d)\n", len); | 
 | 	len = ETH_FRAME_LEN; | 
 |     } | 
 |     mp->tx_bufs[fill] = skb; | 
 |     cp = mp->tx_cmds + NCMDS_TX * fill; | 
 |     st_le16(&cp->req_count, len); | 
 |     st_le32(&cp->phy_addr, virt_to_bus(skb->data)); | 
 |  | 
 |     np = mp->tx_cmds + NCMDS_TX * next; | 
 |     out_le16(&np->command, DBDMA_STOP); | 
 |  | 
 |     /* poke the tx dma channel */ | 
 |     spin_lock_irqsave(&mp->lock, flags); | 
 |     mp->tx_fill = next; | 
 |     if (!mp->tx_bad_runt && mp->tx_active < MAX_TX_ACTIVE) { | 
 | 	out_le16(&cp->xfer_status, 0); | 
 | 	out_le16(&cp->command, OUTPUT_LAST); | 
 | 	out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE)); | 
 | 	++mp->tx_active; | 
 | 	mace_set_timeout(dev); | 
 |     } | 
 |     if (++next >= N_TX_RING) | 
 | 	next = 0; | 
 |     if (next == mp->tx_empty) | 
 | 	netif_stop_queue(dev); | 
 |     spin_unlock_irqrestore(&mp->lock, flags); | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static struct net_device_stats *mace_stats(struct net_device *dev) | 
 | { | 
 |     struct mace_data *p = (struct mace_data *) dev->priv; | 
 |  | 
 |     return &p->stats; | 
 | } | 
 |  | 
 | static void mace_set_multicast(struct net_device *dev) | 
 | { | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     int i, j; | 
 |     u32 crc; | 
 |     unsigned long flags; | 
 |  | 
 |     spin_lock_irqsave(&mp->lock, flags); | 
 |     mp->maccc &= ~PROM; | 
 |     if (dev->flags & IFF_PROMISC) { | 
 | 	mp->maccc |= PROM; | 
 |     } else { | 
 | 	unsigned char multicast_filter[8]; | 
 | 	struct dev_mc_list *dmi = dev->mc_list; | 
 |  | 
 | 	if (dev->flags & IFF_ALLMULTI) { | 
 | 	    for (i = 0; i < 8; i++) | 
 | 		multicast_filter[i] = 0xff; | 
 | 	} else { | 
 | 	    for (i = 0; i < 8; i++) | 
 | 		multicast_filter[i] = 0; | 
 | 	    for (i = 0; i < dev->mc_count; i++) { | 
 | 	        crc = ether_crc_le(6, dmi->dmi_addr); | 
 | 		j = crc >> 26;	/* bit number in multicast_filter */ | 
 | 		multicast_filter[j >> 3] |= 1 << (j & 7); | 
 | 		dmi = dmi->next; | 
 | 	    } | 
 | 	} | 
 | #if 0 | 
 | 	printk("Multicast filter :"); | 
 | 	for (i = 0; i < 8; i++) | 
 | 	    printk("%02x ", multicast_filter[i]); | 
 | 	printk("\n"); | 
 | #endif | 
 |  | 
 | 	if (mp->chipid == BROKEN_ADDRCHG_REV) | 
 | 	    out_8(&mb->iac, LOGADDR); | 
 | 	else { | 
 | 	    out_8(&mb->iac, ADDRCHG | LOGADDR); | 
 | 	    while ((in_8(&mb->iac) & ADDRCHG) != 0) | 
 | 		; | 
 | 	} | 
 | 	for (i = 0; i < 8; ++i) | 
 | 	    out_8(&mb->ladrf, multicast_filter[i]); | 
 | 	if (mp->chipid != BROKEN_ADDRCHG_REV) | 
 | 	    out_8(&mb->iac, 0); | 
 |     } | 
 |     /* reset maccc */ | 
 |     out_8(&mb->maccc, mp->maccc); | 
 |     spin_unlock_irqrestore(&mp->lock, flags); | 
 | } | 
 |  | 
 | static void mace_handle_misc_intrs(struct mace_data *mp, int intr) | 
 | { | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     static int mace_babbles, mace_jabbers; | 
 |  | 
 |     if (intr & MPCO) | 
 | 	mp->stats.rx_missed_errors += 256; | 
 |     mp->stats.rx_missed_errors += in_8(&mb->mpc);   /* reading clears it */ | 
 |     if (intr & RNTPCO) | 
 | 	mp->stats.rx_length_errors += 256; | 
 |     mp->stats.rx_length_errors += in_8(&mb->rntpc); /* reading clears it */ | 
 |     if (intr & CERR) | 
 | 	++mp->stats.tx_heartbeat_errors; | 
 |     if (intr & BABBLE) | 
 | 	if (mace_babbles++ < 4) | 
 | 	    printk(KERN_DEBUG "mace: babbling transmitter\n"); | 
 |     if (intr & JABBER) | 
 | 	if (mace_jabbers++ < 4) | 
 | 	    printk(KERN_DEBUG "mace: jabbering transceiver\n"); | 
 | } | 
 |  | 
 | static irqreturn_t mace_interrupt(int irq, void *dev_id) | 
 | { | 
 |     struct net_device *dev = (struct net_device *) dev_id; | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     volatile struct dbdma_regs __iomem *td = mp->tx_dma; | 
 |     volatile struct dbdma_cmd *cp; | 
 |     int intr, fs, i, stat, x; | 
 |     int xcount, dstat; | 
 |     unsigned long flags; | 
 |     /* static int mace_last_fs, mace_last_xcount; */ | 
 |  | 
 |     spin_lock_irqsave(&mp->lock, flags); | 
 |     intr = in_8(&mb->ir);		/* read interrupt register */ | 
 |     in_8(&mb->xmtrc);			/* get retries */ | 
 |     mace_handle_misc_intrs(mp, intr); | 
 |  | 
 |     i = mp->tx_empty; | 
 |     while (in_8(&mb->pr) & XMTSV) { | 
 | 	del_timer(&mp->tx_timeout); | 
 | 	mp->timeout_active = 0; | 
 | 	/* | 
 | 	 * Clear any interrupt indication associated with this status | 
 | 	 * word.  This appears to unlatch any error indication from | 
 | 	 * the DMA controller. | 
 | 	 */ | 
 | 	intr = in_8(&mb->ir); | 
 | 	if (intr != 0) | 
 | 	    mace_handle_misc_intrs(mp, intr); | 
 | 	if (mp->tx_bad_runt) { | 
 | 	    fs = in_8(&mb->xmtfs); | 
 | 	    mp->tx_bad_runt = 0; | 
 | 	    out_8(&mb->xmtfc, AUTO_PAD_XMIT); | 
 | 	    continue; | 
 | 	} | 
 | 	dstat = ld_le32(&td->status); | 
 | 	/* stop DMA controller */ | 
 | 	out_le32(&td->control, RUN << 16); | 
 | 	/* | 
 | 	 * xcount is the number of complete frames which have been | 
 | 	 * written to the fifo but for which status has not been read. | 
 | 	 */ | 
 | 	xcount = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK; | 
 | 	if (xcount == 0 || (dstat & DEAD)) { | 
 | 	    /* | 
 | 	     * If a packet was aborted before the DMA controller has | 
 | 	     * finished transferring it, it seems that there are 2 bytes | 
 | 	     * which are stuck in some buffer somewhere.  These will get | 
 | 	     * transmitted as soon as we read the frame status (which | 
 | 	     * reenables the transmit data transfer request).  Turning | 
 | 	     * off the DMA controller and/or resetting the MACE doesn't | 
 | 	     * help.  So we disable auto-padding and FCS transmission | 
 | 	     * so the two bytes will only be a runt packet which should | 
 | 	     * be ignored by other stations. | 
 | 	     */ | 
 | 	    out_8(&mb->xmtfc, DXMTFCS); | 
 | 	} | 
 | 	fs = in_8(&mb->xmtfs); | 
 | 	if ((fs & XMTSV) == 0) { | 
 | 	    printk(KERN_ERR "mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n", | 
 | 		   fs, xcount, dstat); | 
 | 	    mace_reset(dev); | 
 | 		/* | 
 | 		 * XXX mace likes to hang the machine after a xmtfs error. | 
 | 		 * This is hard to reproduce, reseting *may* help | 
 | 		 */ | 
 | 	} | 
 | 	cp = mp->tx_cmds + NCMDS_TX * i; | 
 | 	stat = ld_le16(&cp->xfer_status); | 
 | 	if ((fs & (UFLO|LCOL|LCAR|RTRY)) || (dstat & DEAD) || xcount == 0) { | 
 | 	    /* | 
 | 	     * Check whether there were in fact 2 bytes written to | 
 | 	     * the transmit FIFO. | 
 | 	     */ | 
 | 	    udelay(1); | 
 | 	    x = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK; | 
 | 	    if (x != 0) { | 
 | 		/* there were two bytes with an end-of-packet indication */ | 
 | 		mp->tx_bad_runt = 1; | 
 | 		mace_set_timeout(dev); | 
 | 	    } else { | 
 | 		/* | 
 | 		 * Either there weren't the two bytes buffered up, or they | 
 | 		 * didn't have an end-of-packet indication. | 
 | 		 * We flush the transmit FIFO just in case (by setting the | 
 | 		 * XMTFWU bit with the transmitter disabled). | 
 | 		 */ | 
 | 		out_8(&mb->maccc, in_8(&mb->maccc) & ~ENXMT); | 
 | 		out_8(&mb->fifocc, in_8(&mb->fifocc) | XMTFWU); | 
 | 		udelay(1); | 
 | 		out_8(&mb->maccc, in_8(&mb->maccc) | ENXMT); | 
 | 		out_8(&mb->xmtfc, AUTO_PAD_XMIT); | 
 | 	    } | 
 | 	} | 
 | 	/* dma should have finished */ | 
 | 	if (i == mp->tx_fill) { | 
 | 	    printk(KERN_DEBUG "mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n", | 
 | 		   fs, xcount, dstat); | 
 | 	    continue; | 
 | 	} | 
 | 	/* Update stats */ | 
 | 	if (fs & (UFLO|LCOL|LCAR|RTRY)) { | 
 | 	    ++mp->stats.tx_errors; | 
 | 	    if (fs & LCAR) | 
 | 		++mp->stats.tx_carrier_errors; | 
 | 	    if (fs & (UFLO|LCOL|RTRY)) | 
 | 		++mp->stats.tx_aborted_errors; | 
 | 	} else { | 
 | 	    mp->stats.tx_bytes += mp->tx_bufs[i]->len; | 
 | 	    ++mp->stats.tx_packets; | 
 | 	} | 
 | 	dev_kfree_skb_irq(mp->tx_bufs[i]); | 
 | 	--mp->tx_active; | 
 | 	if (++i >= N_TX_RING) | 
 | 	    i = 0; | 
 | #if 0 | 
 | 	mace_last_fs = fs; | 
 | 	mace_last_xcount = xcount; | 
 | #endif | 
 |     } | 
 |  | 
 |     if (i != mp->tx_empty) { | 
 | 	mp->tx_fullup = 0; | 
 | 	netif_wake_queue(dev); | 
 |     } | 
 |     mp->tx_empty = i; | 
 |     i += mp->tx_active; | 
 |     if (i >= N_TX_RING) | 
 | 	i -= N_TX_RING; | 
 |     if (!mp->tx_bad_runt && i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE) { | 
 | 	do { | 
 | 	    /* set up the next one */ | 
 | 	    cp = mp->tx_cmds + NCMDS_TX * i; | 
 | 	    out_le16(&cp->xfer_status, 0); | 
 | 	    out_le16(&cp->command, OUTPUT_LAST); | 
 | 	    ++mp->tx_active; | 
 | 	    if (++i >= N_TX_RING) | 
 | 		i = 0; | 
 | 	} while (i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE); | 
 | 	out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE)); | 
 | 	mace_set_timeout(dev); | 
 |     } | 
 |     spin_unlock_irqrestore(&mp->lock, flags); | 
 |     return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static void mace_tx_timeout(unsigned long data) | 
 | { | 
 |     struct net_device *dev = (struct net_device *) data; | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct mace __iomem *mb = mp->mace; | 
 |     volatile struct dbdma_regs __iomem *td = mp->tx_dma; | 
 |     volatile struct dbdma_regs __iomem *rd = mp->rx_dma; | 
 |     volatile struct dbdma_cmd *cp; | 
 |     unsigned long flags; | 
 |     int i; | 
 |  | 
 |     spin_lock_irqsave(&mp->lock, flags); | 
 |     mp->timeout_active = 0; | 
 |     if (mp->tx_active == 0 && !mp->tx_bad_runt) | 
 | 	goto out; | 
 |  | 
 |     /* update various counters */ | 
 |     mace_handle_misc_intrs(mp, in_8(&mb->ir)); | 
 |  | 
 |     cp = mp->tx_cmds + NCMDS_TX * mp->tx_empty; | 
 |  | 
 |     /* turn off both tx and rx and reset the chip */ | 
 |     out_8(&mb->maccc, 0); | 
 |     printk(KERN_ERR "mace: transmit timeout - resetting\n"); | 
 |     dbdma_reset(td); | 
 |     mace_reset(dev); | 
 |  | 
 |     /* restart rx dma */ | 
 |     cp = bus_to_virt(ld_le32(&rd->cmdptr)); | 
 |     dbdma_reset(rd); | 
 |     out_le16(&cp->xfer_status, 0); | 
 |     out_le32(&rd->cmdptr, virt_to_bus(cp)); | 
 |     out_le32(&rd->control, (RUN << 16) | RUN); | 
 |  | 
 |     /* fix up the transmit side */ | 
 |     i = mp->tx_empty; | 
 |     mp->tx_active = 0; | 
 |     ++mp->stats.tx_errors; | 
 |     if (mp->tx_bad_runt) { | 
 | 	mp->tx_bad_runt = 0; | 
 |     } else if (i != mp->tx_fill) { | 
 | 	dev_kfree_skb(mp->tx_bufs[i]); | 
 | 	if (++i >= N_TX_RING) | 
 | 	    i = 0; | 
 | 	mp->tx_empty = i; | 
 |     } | 
 |     mp->tx_fullup = 0; | 
 |     netif_wake_queue(dev); | 
 |     if (i != mp->tx_fill) { | 
 | 	cp = mp->tx_cmds + NCMDS_TX * i; | 
 | 	out_le16(&cp->xfer_status, 0); | 
 | 	out_le16(&cp->command, OUTPUT_LAST); | 
 | 	out_le32(&td->cmdptr, virt_to_bus(cp)); | 
 | 	out_le32(&td->control, (RUN << 16) | RUN); | 
 | 	++mp->tx_active; | 
 | 	mace_set_timeout(dev); | 
 |     } | 
 |  | 
 |     /* turn it back on */ | 
 |     out_8(&mb->imr, RCVINT); | 
 |     out_8(&mb->maccc, mp->maccc); | 
 |  | 
 | out: | 
 |     spin_unlock_irqrestore(&mp->lock, flags); | 
 | } | 
 |  | 
 | static irqreturn_t mace_txdma_intr(int irq, void *dev_id) | 
 | { | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t mace_rxdma_intr(int irq, void *dev_id) | 
 | { | 
 |     struct net_device *dev = (struct net_device *) dev_id; | 
 |     struct mace_data *mp = (struct mace_data *) dev->priv; | 
 |     volatile struct dbdma_regs __iomem *rd = mp->rx_dma; | 
 |     volatile struct dbdma_cmd *cp, *np; | 
 |     int i, nb, stat, next; | 
 |     struct sk_buff *skb; | 
 |     unsigned frame_status; | 
 |     static int mace_lost_status; | 
 |     unsigned char *data; | 
 |     unsigned long flags; | 
 |  | 
 |     spin_lock_irqsave(&mp->lock, flags); | 
 |     for (i = mp->rx_empty; i != mp->rx_fill; ) { | 
 | 	cp = mp->rx_cmds + i; | 
 | 	stat = ld_le16(&cp->xfer_status); | 
 | 	if ((stat & ACTIVE) == 0) { | 
 | 	    next = i + 1; | 
 | 	    if (next >= N_RX_RING) | 
 | 		next = 0; | 
 | 	    np = mp->rx_cmds + next; | 
 | 	    if (next != mp->rx_fill | 
 | 		&& (ld_le16(&np->xfer_status) & ACTIVE) != 0) { | 
 | 		printk(KERN_DEBUG "mace: lost a status word\n"); | 
 | 		++mace_lost_status; | 
 | 	    } else | 
 | 		break; | 
 | 	} | 
 | 	nb = ld_le16(&cp->req_count) - ld_le16(&cp->res_count); | 
 | 	out_le16(&cp->command, DBDMA_STOP); | 
 | 	/* got a packet, have a look at it */ | 
 | 	skb = mp->rx_bufs[i]; | 
 | 	if (skb == 0) { | 
 | 	    ++mp->stats.rx_dropped; | 
 | 	} else if (nb > 8) { | 
 | 	    data = skb->data; | 
 | 	    frame_status = (data[nb-3] << 8) + data[nb-4]; | 
 | 	    if (frame_status & (RS_OFLO|RS_CLSN|RS_FRAMERR|RS_FCSERR)) { | 
 | 		++mp->stats.rx_errors; | 
 | 		if (frame_status & RS_OFLO) | 
 | 		    ++mp->stats.rx_over_errors; | 
 | 		if (frame_status & RS_FRAMERR) | 
 | 		    ++mp->stats.rx_frame_errors; | 
 | 		if (frame_status & RS_FCSERR) | 
 | 		    ++mp->stats.rx_crc_errors; | 
 | 	    } else { | 
 | 		/* Mace feature AUTO_STRIP_RCV is on by default, dropping the | 
 | 		 * FCS on frames with 802.3 headers. This means that Ethernet | 
 | 		 * frames have 8 extra octets at the end, while 802.3 frames | 
 | 		 * have only 4. We need to correctly account for this. */ | 
 | 		if (*(unsigned short *)(data+12) < 1536) /* 802.3 header */ | 
 | 		    nb -= 4; | 
 | 		else	/* Ethernet header; mace includes FCS */ | 
 | 		    nb -= 8; | 
 | 		skb_put(skb, nb); | 
 | 		skb->dev = dev; | 
 | 		skb->protocol = eth_type_trans(skb, dev); | 
 | 		mp->stats.rx_bytes += skb->len; | 
 | 		netif_rx(skb); | 
 | 		dev->last_rx = jiffies; | 
 | 		mp->rx_bufs[i] = NULL; | 
 | 		++mp->stats.rx_packets; | 
 | 	    } | 
 | 	} else { | 
 | 	    ++mp->stats.rx_errors; | 
 | 	    ++mp->stats.rx_length_errors; | 
 | 	} | 
 |  | 
 | 	/* advance to next */ | 
 | 	if (++i >= N_RX_RING) | 
 | 	    i = 0; | 
 |     } | 
 |     mp->rx_empty = i; | 
 |  | 
 |     i = mp->rx_fill; | 
 |     for (;;) { | 
 | 	next = i + 1; | 
 | 	if (next >= N_RX_RING) | 
 | 	    next = 0; | 
 | 	if (next == mp->rx_empty) | 
 | 	    break; | 
 | 	cp = mp->rx_cmds + i; | 
 | 	skb = mp->rx_bufs[i]; | 
 | 	if (skb == 0) { | 
 | 	    skb = dev_alloc_skb(RX_BUFLEN + 2); | 
 | 	    if (skb != 0) { | 
 | 		skb_reserve(skb, 2); | 
 | 		mp->rx_bufs[i] = skb; | 
 | 	    } | 
 | 	} | 
 | 	st_le16(&cp->req_count, RX_BUFLEN); | 
 | 	data = skb? skb->data: dummy_buf; | 
 | 	st_le32(&cp->phy_addr, virt_to_bus(data)); | 
 | 	out_le16(&cp->xfer_status, 0); | 
 | 	out_le16(&cp->command, INPUT_LAST + INTR_ALWAYS); | 
 | #if 0 | 
 | 	if ((ld_le32(&rd->status) & ACTIVE) != 0) { | 
 | 	    out_le32(&rd->control, (PAUSE << 16) | PAUSE); | 
 | 	    while ((in_le32(&rd->status) & ACTIVE) != 0) | 
 | 		; | 
 | 	} | 
 | #endif | 
 | 	i = next; | 
 |     } | 
 |     if (i != mp->rx_fill) { | 
 | 	out_le32(&rd->control, ((RUN|WAKE) << 16) | (RUN|WAKE)); | 
 | 	mp->rx_fill = i; | 
 |     } | 
 |     spin_unlock_irqrestore(&mp->lock, flags); | 
 |     return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static struct of_device_id mace_match[] = | 
 | { | 
 | 	{ | 
 | 	.name 		= "mace", | 
 | 	}, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE (of, mace_match); | 
 |  | 
 | static struct macio_driver mace_driver = | 
 | { | 
 | 	.name 		= "mace", | 
 | 	.match_table	= mace_match, | 
 | 	.probe		= mace_probe, | 
 | 	.remove		= mace_remove, | 
 | }; | 
 |  | 
 |  | 
 | static int __init mace_init(void) | 
 | { | 
 | 	return macio_register_driver(&mace_driver); | 
 | } | 
 |  | 
 | static void __exit mace_cleanup(void) | 
 | { | 
 | 	macio_unregister_driver(&mace_driver); | 
 |  | 
 | 	kfree(dummy_buf); | 
 | 	dummy_buf = NULL; | 
 | } | 
 |  | 
 | MODULE_AUTHOR("Paul Mackerras"); | 
 | MODULE_DESCRIPTION("PowerMac MACE driver."); | 
 | module_param(port_aaui, int, 0); | 
 | MODULE_PARM_DESC(port_aaui, "MACE uses AAUI port (0-1)"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_init(mace_init); | 
 | module_exit(mace_cleanup); |