| /* | 
 |  * at91_cf.c -- AT91 CompactFlash controller driver | 
 |  * | 
 |  * Copyright (C) 2005 David Brownell | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 |  | 
 | #include <pcmcia/ss.h> | 
 |  | 
 | #include <asm/hardware.h> | 
 | #include <asm/io.h> | 
 | #include <asm/sizes.h> | 
 |  | 
 | #include <asm/arch/board.h> | 
 | #include <asm/arch/gpio.h> | 
 | #include <asm/arch/at91rm9200_mc.h> | 
 |  | 
 |  | 
 | /* | 
 |  * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW; | 
 |  * some other bit in {A24,A22..A11} is nREG to flag memory access | 
 |  * (vs attributes).  So more than 2KB/region would just be waste. | 
 |  * Note: These are offsets from the physical base address. | 
 |  */ | 
 | #define	CF_ATTR_PHYS	(0) | 
 | #define	CF_IO_PHYS	(1 << 23) | 
 | #define	CF_MEM_PHYS	(0x017ff800) | 
 |  | 
 | /*--------------------------------------------------------------------------*/ | 
 |  | 
 | static const char driver_name[] = "at91_cf"; | 
 |  | 
 | struct at91_cf_socket { | 
 | 	struct pcmcia_socket	socket; | 
 |  | 
 | 	unsigned		present:1; | 
 |  | 
 | 	struct platform_device	*pdev; | 
 | 	struct at91_cf_data	*board; | 
 |  | 
 | 	unsigned long		phys_baseaddr; | 
 | }; | 
 |  | 
 | #define	SZ_2K			(2 * SZ_1K) | 
 |  | 
 | static inline int at91_cf_present(struct at91_cf_socket *cf) | 
 | { | 
 | 	return !at91_get_gpio_value(cf->board->det_pin); | 
 | } | 
 |  | 
 | /*--------------------------------------------------------------------------*/ | 
 |  | 
 | static int at91_cf_ss_init(struct pcmcia_socket *s) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static irqreturn_t at91_cf_irq(int irq, void *_cf) | 
 | { | 
 | 	struct at91_cf_socket *cf = _cf; | 
 |  | 
 | 	if (irq == cf->board->det_pin) { | 
 | 		unsigned present = at91_cf_present(cf); | 
 |  | 
 | 		/* kick pccard as needed */ | 
 | 		if (present != cf->present) { | 
 | 			cf->present = present; | 
 | 			pr_debug("%s: card %s\n", driver_name, | 
 | 					present ? "present" : "gone"); | 
 | 			pcmcia_parse_events(&cf->socket, SS_DETECT); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp) | 
 | { | 
 | 	struct at91_cf_socket	*cf; | 
 |  | 
 | 	if (!sp) | 
 | 		return -EINVAL; | 
 |  | 
 | 	cf = container_of(s, struct at91_cf_socket, socket); | 
 |  | 
 | 	/* NOTE: CF is always 3VCARD */ | 
 | 	if (at91_cf_present(cf)) { | 
 | 		int rdy	= cf->board->irq_pin;	/* RDY/nIRQ */ | 
 | 		int vcc	= cf->board->vcc_pin; | 
 |  | 
 | 		*sp = SS_DETECT | SS_3VCARD; | 
 | 		if (!rdy || at91_get_gpio_value(rdy)) | 
 | 			*sp |= SS_READY; | 
 | 		if (!vcc || at91_get_gpio_value(vcc)) | 
 | 			*sp |= SS_POWERON; | 
 | 	} else | 
 | 		*sp = 0; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s) | 
 | { | 
 | 	struct at91_cf_socket	*cf; | 
 |  | 
 | 	cf = container_of(sock, struct at91_cf_socket, socket); | 
 |  | 
 | 	/* switch Vcc if needed and possible */ | 
 | 	if (cf->board->vcc_pin) { | 
 | 		switch (s->Vcc) { | 
 | 			case 0: | 
 | 				at91_set_gpio_value(cf->board->vcc_pin, 0); | 
 | 				break; | 
 | 			case 33: | 
 | 				at91_set_gpio_value(cf->board->vcc_pin, 1); | 
 | 				break; | 
 | 			default: | 
 | 				return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* toggle reset if needed */ | 
 | 	at91_set_gpio_value(cf->board->rst_pin, s->flags & SS_RESET); | 
 |  | 
 | 	pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n", | 
 | 		driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int at91_cf_ss_suspend(struct pcmcia_socket *s) | 
 | { | 
 | 	return at91_cf_set_socket(s, &dead_socket); | 
 | } | 
 |  | 
 | /* we already mapped the I/O region */ | 
 | static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) | 
 | { | 
 | 	struct at91_cf_socket	*cf; | 
 | 	u32			csr; | 
 |  | 
 | 	cf = container_of(s, struct at91_cf_socket, socket); | 
 | 	io->flags &= (MAP_ACTIVE | MAP_16BIT | MAP_AUTOSZ); | 
 |  | 
 | 	/* | 
 | 	 * Use 16 bit accesses unless/until we need 8-bit i/o space. | 
 | 	 */ | 
 | 	csr = at91_sys_read(AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW; | 
 |  | 
 | 	/* | 
 | 	 * NOTE: this CF controller ignores IOIS16, so we can't really do | 
 | 	 * MAP_AUTOSZ.  The 16bit mode allows single byte access on either | 
 | 	 * D0-D7 (even addr) or D8-D15 (odd), so it's close enough for many | 
 | 	 * purposes (and handles ide-cs). | 
 | 	 * | 
 | 	 * The 8bit mode is needed for odd byte access on D0-D7.  It seems | 
 | 	 * some cards only like that way to get at the odd byte, despite | 
 | 	 * CF 3.0 spec table 35 also giving the D8-D15 option. | 
 | 	 */ | 
 | 	if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) { | 
 | 		csr |= AT91_SMC_DBW_8; | 
 | 		pr_debug("%s: 8bit i/o bus\n", driver_name); | 
 | 	} else { | 
 | 		csr |= AT91_SMC_DBW_16; | 
 | 		pr_debug("%s: 16bit i/o bus\n", driver_name); | 
 | 	} | 
 | 	at91_sys_write(AT91_SMC_CSR(cf->board->chipselect), csr); | 
 |  | 
 | 	io->start = cf->socket.io_offset; | 
 | 	io->stop = io->start + SZ_2K - 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* pcmcia layer maps/unmaps mem regions */ | 
 | static int | 
 | at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map) | 
 | { | 
 | 	struct at91_cf_socket	*cf; | 
 |  | 
 | 	if (map->card_start) | 
 | 		return -EINVAL; | 
 |  | 
 | 	cf = container_of(s, struct at91_cf_socket, socket); | 
 |  | 
 | 	map->flags &= (MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT); | 
 | 	if (map->flags & MAP_ATTRIB) | 
 | 		map->static_start = cf->phys_baseaddr + CF_ATTR_PHYS; | 
 | 	else | 
 | 		map->static_start = cf->phys_baseaddr + CF_MEM_PHYS; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct pccard_operations at91_cf_ops = { | 
 | 	.init			= at91_cf_ss_init, | 
 | 	.suspend		= at91_cf_ss_suspend, | 
 | 	.get_status		= at91_cf_get_status, | 
 | 	.set_socket		= at91_cf_set_socket, | 
 | 	.set_io_map		= at91_cf_set_io_map, | 
 | 	.set_mem_map		= at91_cf_set_mem_map, | 
 | }; | 
 |  | 
 | /*--------------------------------------------------------------------------*/ | 
 |  | 
 | static int __init at91_cf_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct at91_cf_socket	*cf; | 
 | 	struct at91_cf_data	*board = pdev->dev.platform_data; | 
 | 	struct resource		*io; | 
 | 	int			status; | 
 |  | 
 | 	if (!board || !board->det_pin || !board->rst_pin) | 
 | 		return -ENODEV; | 
 |  | 
 | 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!io) | 
 | 		return -ENODEV; | 
 |  | 
 | 	cf = kzalloc(sizeof *cf, GFP_KERNEL); | 
 | 	if (!cf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	cf->board = board; | 
 | 	cf->pdev = pdev; | 
 | 	cf->phys_baseaddr = io->start; | 
 | 	platform_set_drvdata(pdev, cf); | 
 |  | 
 | 	/* must be a GPIO; ergo must trigger on both edges */ | 
 | 	status = request_irq(board->det_pin, at91_cf_irq, 0, driver_name, cf); | 
 | 	if (status < 0) | 
 | 		goto fail0; | 
 | 	device_init_wakeup(&pdev->dev, 1); | 
 |  | 
 | 	/* | 
 | 	 * The card driver will request this irq later as needed. | 
 | 	 * but it causes lots of "irqNN: nobody cared" messages | 
 | 	 * unless we report that we handle everything (sigh). | 
 | 	 * (Note:  DK board doesn't wire the IRQ pin...) | 
 | 	 */ | 
 | 	if (board->irq_pin) { | 
 | 		status = request_irq(board->irq_pin, at91_cf_irq, | 
 | 				IRQF_SHARED, driver_name, cf); | 
 | 		if (status < 0) | 
 | 			goto fail0a; | 
 | 		cf->socket.pci_irq = board->irq_pin; | 
 | 	} else | 
 | 		cf->socket.pci_irq = NR_IRQS + 1; | 
 |  | 
 | 	/* pcmcia layer only remaps "real" memory not iospace */ | 
 | 	cf->socket.io_offset = (unsigned long) ioremap(cf->phys_baseaddr + CF_IO_PHYS, SZ_2K); | 
 | 	if (!cf->socket.io_offset) { | 
 | 		status = -ENXIO; | 
 | 		goto fail1; | 
 | 	} | 
 |  | 
 | 	/* reserve chip-select regions */ | 
 | 	if (!request_mem_region(io->start, io->end + 1 - io->start, | 
 | 				driver_name)) { | 
 | 		status = -ENXIO; | 
 | 		goto fail1; | 
 | 	} | 
 |  | 
 | 	pr_info("%s: irqs det #%d, io #%d\n", driver_name, | 
 | 		board->det_pin, board->irq_pin); | 
 |  | 
 | 	cf->socket.owner = THIS_MODULE; | 
 | 	cf->socket.dev.parent = &pdev->dev; | 
 | 	cf->socket.ops = &at91_cf_ops; | 
 | 	cf->socket.resource_ops = &pccard_static_ops; | 
 | 	cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP | 
 | 				| SS_CAP_MEM_ALIGN; | 
 | 	cf->socket.map_size = SZ_2K; | 
 | 	cf->socket.io[0].res = io; | 
 |  | 
 | 	status = pcmcia_register_socket(&cf->socket); | 
 | 	if (status < 0) | 
 | 		goto fail2; | 
 |  | 
 | 	return 0; | 
 |  | 
 | fail2: | 
 | 	release_mem_region(io->start, io->end + 1 - io->start); | 
 | fail1: | 
 | 	if (cf->socket.io_offset) | 
 | 		iounmap((void __iomem *) cf->socket.io_offset); | 
 | 	if (board->irq_pin) | 
 | 		free_irq(board->irq_pin, cf); | 
 | fail0a: | 
 | 	device_init_wakeup(&pdev->dev, 0); | 
 | 	free_irq(board->det_pin, cf); | 
 | fail0: | 
 | 	kfree(cf); | 
 | 	return status; | 
 | } | 
 |  | 
 | static int __exit at91_cf_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev); | 
 | 	struct at91_cf_data	*board = cf->board; | 
 | 	struct resource		*io = cf->socket.io[0].res; | 
 |  | 
 | 	pcmcia_unregister_socket(&cf->socket); | 
 | 	if (board->irq_pin) | 
 | 		free_irq(board->irq_pin, cf); | 
 | 	device_init_wakeup(&pdev->dev, 0); | 
 | 	free_irq(board->det_pin, cf); | 
 | 	iounmap((void __iomem *) cf->socket.io_offset); | 
 | 	release_mem_region(io->start, io->end + 1 - io->start); | 
 |  | 
 | 	kfree(cf); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef	CONFIG_PM | 
 |  | 
 | static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg) | 
 | { | 
 | 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev); | 
 | 	struct at91_cf_data	*board = cf->board; | 
 |  | 
 | 	pcmcia_socket_dev_suspend(&pdev->dev, mesg); | 
 | 	if (device_may_wakeup(&pdev->dev)) { | 
 | 		enable_irq_wake(board->det_pin); | 
 | 		if (board->irq_pin) | 
 | 			enable_irq_wake(board->irq_pin); | 
 | 	} else { | 
 | 		disable_irq_wake(board->det_pin); | 
 | 		if (board->irq_pin) | 
 | 			disable_irq_wake(board->irq_pin); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int at91_cf_resume(struct platform_device *pdev) | 
 | { | 
 | 	pcmcia_socket_dev_resume(&pdev->dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #else | 
 | #define	at91_cf_suspend		NULL | 
 | #define	at91_cf_resume		NULL | 
 | #endif | 
 |  | 
 | static struct platform_driver at91_cf_driver = { | 
 | 	.driver = { | 
 | 		.name		= (char *) driver_name, | 
 | 		.owner		= THIS_MODULE, | 
 | 	}, | 
 | 	.probe		= at91_cf_probe, | 
 | 	.remove		= __exit_p(at91_cf_remove), | 
 | 	.suspend	= at91_cf_suspend, | 
 | 	.resume		= at91_cf_resume, | 
 | }; | 
 |  | 
 | /*--------------------------------------------------------------------------*/ | 
 |  | 
 | static int __init at91_cf_init(void) | 
 | { | 
 | 	return platform_driver_register(&at91_cf_driver); | 
 | } | 
 | module_init(at91_cf_init); | 
 |  | 
 | static void __exit at91_cf_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&at91_cf_driver); | 
 | } | 
 | module_exit(at91_cf_exit); | 
 |  | 
 | MODULE_DESCRIPTION("AT91 Compact Flash Driver"); | 
 | MODULE_AUTHOR("David Brownell"); | 
 | MODULE_LICENSE("GPL"); |