[media] common: move media/common/tuners to media/tuners
Move the tuners one level up, as the "common" directory will be used
by drivers that are shared between more than one driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/common/Makefile b/drivers/media/common/Makefile
index d0512d7..a471242 100644
--- a/drivers/media/common/Makefile
+++ b/drivers/media/common/Makefile
@@ -1,6 +1,6 @@
saa7146-objs := saa7146_i2c.o saa7146_core.o
saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
-obj-y += tuners/ b2c2/
+obj-y += b2c2/
obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o
diff --git a/drivers/media/common/b2c2/Makefile b/drivers/media/common/b2c2/Makefile
index 377d051..48a4c90 100644
--- a/drivers/media/common/b2c2/Makefile
+++ b/drivers/media/common/b2c2/Makefile
@@ -4,4 +4,4 @@
ccflags-y += -Idrivers/media/dvb-core/
ccflags-y += -Idrivers/media/dvb-frontends/
-ccflags-y += -Idrivers/media/common/tuners/
+ccflags-y += -Idrivers/media/tuners/
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
deleted file mode 100644
index 94c6ff7..0000000
--- a/drivers/media/common/tuners/Kconfig
+++ /dev/null
@@ -1,243 +0,0 @@
-config MEDIA_ATTACH
- bool "Load and attach frontend and tuner driver modules as needed"
- depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
- depends on MODULES
- default y if !EXPERT
- help
- Remove the static dependency of DVB card drivers on all
- frontend modules for all possible card variants. Instead,
- allow the card drivers to only load the frontend modules
- they require.
-
- Also, tuner module will automatically load a tuner driver
- when needed, for analog mode.
-
- This saves several KBytes of memory.
-
- Note: You will need module-init-tools v3.2 or later for this feature.
-
- If unsure say Y.
-
-config MEDIA_TUNER
- tristate
- depends on (MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT) && I2C
- default y
- select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
- select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
- select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
- select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMISE
- select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
- select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMISE && MEDIA_RADIO_SUPPORT && EXPERIMENTAL
- select MEDIA_TUNER_TEA5767 if !MEDIA_TUNER_CUSTOMISE && MEDIA_RADIO_SUPPORT
- select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
- select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE
- select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
-
-config MEDIA_TUNER_CUSTOMISE
- bool "Customize analog and hybrid tuner modules to build"
- depends on MEDIA_TUNER
- default y if EXPERT
- help
- This allows the user to deselect tuner drivers unnecessary
- for their hardware from the build. Use this option with care
- as deselecting tuner drivers which are in fact necessary will
- result in V4L/DVB devices which cannot be tuned due to lack of
- driver support
-
- If unsure say N.
-
-menu "Customize TV tuners"
- visible if MEDIA_TUNER_CUSTOMISE
- depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
-
-config MEDIA_TUNER_SIMPLE
- tristate "Simple tuner support"
- depends on MEDIA_SUPPORT && I2C
- select MEDIA_TUNER_TDA9887
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Say Y here to include support for various simple tuners.
-
-config MEDIA_TUNER_TDA8290
- tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo"
- depends on MEDIA_SUPPORT && I2C
- select MEDIA_TUNER_TDA827X
- select MEDIA_TUNER_TDA18271
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Say Y here to include support for Philips TDA8290+8275(a) tuner.
-
-config MEDIA_TUNER_TDA827X
- tristate "Philips TDA827X silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A DVB-T silicon tuner module. Say Y when you want to support this tuner.
-
-config MEDIA_TUNER_TDA18271
- tristate "NXP TDA18271 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A silicon tuner module. Say Y when you want to support this tuner.
-
-config MEDIA_TUNER_TDA9887
- tristate "TDA 9885/6/7 analog IF demodulator"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Say Y here to include support for Philips TDA9885/6/7
- analog IF demodulator.
-
-config MEDIA_TUNER_TEA5761
- tristate "TEA 5761 radio tuner (EXPERIMENTAL)"
- depends on MEDIA_SUPPORT && I2C
- depends on EXPERIMENTAL
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Say Y here to include support for the Philips TEA5761 radio tuner.
-
-config MEDIA_TUNER_TEA5767
- tristate "TEA 5767 radio tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Say Y here to include support for the Philips TEA5767 radio tuner.
-
-config MEDIA_TUNER_MT20XX
- tristate "Microtune 2032 / 2050 tuners"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Say Y here to include support for the MT2032 / MT2050 tuner.
-
-config MEDIA_TUNER_MT2060
- tristate "Microtune MT2060 silicon IF tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon IF tuner MT2060 from Microtune.
-
-config MEDIA_TUNER_MT2063
- tristate "Microtune MT2063 silicon IF tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon IF tuner MT2063 from Microtune.
-
-config MEDIA_TUNER_MT2266
- tristate "Microtune MT2266 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon baseband tuner MT2266 from Microtune.
-
-config MEDIA_TUNER_MT2131
- tristate "Microtune MT2131 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon baseband tuner MT2131 from Microtune.
-
-config MEDIA_TUNER_QT1010
- tristate "Quantek QT1010 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon tuner QT1010 from Quantek.
-
-config MEDIA_TUNER_XC2028
- tristate "XCeive xc2028/xc3028 tuners"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Say Y here to include support for the xc2028/xc3028 tuners.
-
-config MEDIA_TUNER_XC5000
- tristate "Xceive XC5000 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon tuner XC5000 from Xceive.
- This device is only used inside a SiP called together with a
- demodulator for now.
-
-config MEDIA_TUNER_XC4000
- tristate "Xceive XC4000 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon tuner XC4000 from Xceive.
- This device is only used inside a SiP called together with a
- demodulator for now.
-
-config MEDIA_TUNER_MXL5005S
- tristate "MaxLinear MSL5005S silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon tuner MXL5005S from MaxLinear.
-
-config MEDIA_TUNER_MXL5007T
- tristate "MaxLinear MxL5007T silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon tuner MxL5007T from MaxLinear.
-
-config MEDIA_TUNER_MC44S803
- tristate "Freescale MC44S803 Low Power CMOS Broadband tuners"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Say Y here to support the Freescale MC44S803 based tuners
-
-config MEDIA_TUNER_MAX2165
- tristate "Maxim MAX2165 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- A driver for the silicon tuner MAX2165 from Maxim.
-
-config MEDIA_TUNER_TDA18218
- tristate "NXP TDA18218 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- NXP TDA18218 silicon tuner driver.
-
-config MEDIA_TUNER_FC0011
- tristate "Fitipower FC0011 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Fitipower FC0011 silicon tuner driver.
-
-config MEDIA_TUNER_FC0012
- tristate "Fitipower FC0012 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Fitipower FC0012 silicon tuner driver.
-
-config MEDIA_TUNER_FC0013
- tristate "Fitipower FC0013 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Fitipower FC0013 silicon tuner driver.
-
-config MEDIA_TUNER_TDA18212
- tristate "NXP TDA18212 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- NXP TDA18212 silicon tuner driver.
-
-config MEDIA_TUNER_TUA9001
- tristate "Infineon TUA 9001 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if MEDIA_TUNER_CUSTOMISE
- help
- Infineon TUA 9001 silicon tuner driver.
-endmenu
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
deleted file mode 100644
index 112aeee..0000000
--- a/drivers/media/common/tuners/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Makefile for common V4L/DVB tuners
-#
-
-tda18271-objs := tda18271-maps.o tda18271-common.o tda18271-fe.o
-
-obj-$(CONFIG_MEDIA_TUNER_XC2028) += tuner-xc2028.o
-obj-$(CONFIG_MEDIA_TUNER_SIMPLE) += tuner-simple.o
-# tuner-types will be merged into tuner-simple, in the future
-obj-$(CONFIG_MEDIA_TUNER_SIMPLE) += tuner-types.o
-obj-$(CONFIG_MEDIA_TUNER_MT20XX) += mt20xx.o
-obj-$(CONFIG_MEDIA_TUNER_TDA8290) += tda8290.o
-obj-$(CONFIG_MEDIA_TUNER_TEA5767) += tea5767.o
-obj-$(CONFIG_MEDIA_TUNER_TEA5761) += tea5761.o
-obj-$(CONFIG_MEDIA_TUNER_TDA9887) += tda9887.o
-obj-$(CONFIG_MEDIA_TUNER_TDA827X) += tda827x.o
-obj-$(CONFIG_MEDIA_TUNER_TDA18271) += tda18271.o
-obj-$(CONFIG_MEDIA_TUNER_XC5000) += xc5000.o
-obj-$(CONFIG_MEDIA_TUNER_XC4000) += xc4000.o
-obj-$(CONFIG_MEDIA_TUNER_MT2060) += mt2060.o
-obj-$(CONFIG_MEDIA_TUNER_MT2063) += mt2063.o
-obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o
-obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o
-obj-$(CONFIG_MEDIA_TUNER_MT2131) += mt2131.o
-obj-$(CONFIG_MEDIA_TUNER_MXL5005S) += mxl5005s.o
-obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o
-obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc44s803.o
-obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o
-obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o
-obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o
-obj-$(CONFIG_MEDIA_TUNER_TUA9001) += tua9001.o
-obj-$(CONFIG_MEDIA_TUNER_FC0011) += fc0011.o
-obj-$(CONFIG_MEDIA_TUNER_FC0012) += fc0012.o
-obj-$(CONFIG_MEDIA_TUNER_FC0013) += fc0013.o
-
-ccflags-y += -I$(srctree)/drivers/media/dvb-core
-ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
diff --git a/drivers/media/common/tuners/fc0011.c b/drivers/media/common/tuners/fc0011.c
deleted file mode 100644
index e488254..0000000
--- a/drivers/media/common/tuners/fc0011.c
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * Fitipower FC0011 tuner driver
- *
- * Copyright (C) 2012 Michael Buesch <m@bues.ch>
- *
- * Derived from FC0012 tuner driver:
- * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "fc0011.h"
-
-
-/* Tuner registers */
-enum {
- FC11_REG_0,
- FC11_REG_FA, /* FA */
- FC11_REG_FP, /* FP */
- FC11_REG_XINHI, /* XIN high 8 bit */
- FC11_REG_XINLO, /* XIN low 8 bit */
- FC11_REG_VCO, /* VCO */
- FC11_REG_VCOSEL, /* VCO select */
- FC11_REG_7, /* Unknown tuner reg 7 */
- FC11_REG_8, /* Unknown tuner reg 8 */
- FC11_REG_9,
- FC11_REG_10, /* Unknown tuner reg 10 */
- FC11_REG_11, /* Unknown tuner reg 11 */
- FC11_REG_12,
- FC11_REG_RCCAL, /* RC calibrate */
- FC11_REG_VCOCAL, /* VCO calibrate */
- FC11_REG_15,
- FC11_REG_16, /* Unknown tuner reg 16 */
- FC11_REG_17,
-
- FC11_NR_REGS, /* Number of registers */
-};
-
-enum FC11_REG_VCOSEL_bits {
- FC11_VCOSEL_2 = 0x08, /* VCO select 2 */
- FC11_VCOSEL_1 = 0x10, /* VCO select 1 */
- FC11_VCOSEL_CLKOUT = 0x20, /* Fix clock out */
- FC11_VCOSEL_BW7M = 0x40, /* 7MHz bw */
- FC11_VCOSEL_BW6M = 0x80, /* 6MHz bw */
-};
-
-enum FC11_REG_RCCAL_bits {
- FC11_RCCAL_FORCE = 0x10, /* force */
-};
-
-enum FC11_REG_VCOCAL_bits {
- FC11_VCOCAL_RUN = 0, /* VCO calibration run */
- FC11_VCOCAL_VALUEMASK = 0x3F, /* VCO calibration value mask */
- FC11_VCOCAL_OK = 0x40, /* VCO calibration Ok */
- FC11_VCOCAL_RESET = 0x80, /* VCO calibration reset */
-};
-
-
-struct fc0011_priv {
- struct i2c_adapter *i2c;
- u8 addr;
-
- u32 frequency;
- u32 bandwidth;
-};
-
-
-static int fc0011_writereg(struct fc0011_priv *priv, u8 reg, u8 val)
-{
- u8 buf[2] = { reg, val };
- struct i2c_msg msg = { .addr = priv->addr,
- .flags = 0, .buf = buf, .len = 2 };
-
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- dev_err(&priv->i2c->dev,
- "I2C write reg failed, reg: %02x, val: %02x\n",
- reg, val);
- return -EIO;
- }
-
- return 0;
-}
-
-static int fc0011_readreg(struct fc0011_priv *priv, u8 reg, u8 *val)
-{
- u8 dummy;
- struct i2c_msg msg[2] = {
- { .addr = priv->addr,
- .flags = 0, .buf = ®, .len = 1 },
- { .addr = priv->addr,
- .flags = I2C_M_RD, .buf = val ? : &dummy, .len = 1 },
- };
-
- if (i2c_transfer(priv->i2c, msg, 2) != 2) {
- dev_err(&priv->i2c->dev,
- "I2C read failed, reg: %02x\n", reg);
- return -EIO;
- }
-
- return 0;
-}
-
-static int fc0011_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int fc0011_init(struct dvb_frontend *fe)
-{
- struct fc0011_priv *priv = fe->tuner_priv;
- int err;
-
- if (WARN_ON(!fe->callback))
- return -EINVAL;
-
- err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
- FC0011_FE_CALLBACK_POWER, priv->addr);
- if (err) {
- dev_err(&priv->i2c->dev, "Power-on callback failed\n");
- return err;
- }
- err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
- FC0011_FE_CALLBACK_RESET, priv->addr);
- if (err) {
- dev_err(&priv->i2c->dev, "Reset callback failed\n");
- return err;
- }
-
- return 0;
-}
-
-/* Initiate VCO calibration */
-static int fc0011_vcocal_trigger(struct fc0011_priv *priv)
-{
- int err;
-
- err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET);
- if (err)
- return err;
- err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
- if (err)
- return err;
-
- return 0;
-}
-
-/* Read VCO calibration value */
-static int fc0011_vcocal_read(struct fc0011_priv *priv, u8 *value)
-{
- int err;
-
- err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
- if (err)
- return err;
- usleep_range(10000, 20000);
- err = fc0011_readreg(priv, FC11_REG_VCOCAL, value);
- if (err)
- return err;
-
- return 0;
-}
-
-static int fc0011_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct fc0011_priv *priv = fe->tuner_priv;
- int err;
- unsigned int i, vco_retries;
- u32 freq = p->frequency / 1000;
- u32 bandwidth = p->bandwidth_hz / 1000;
- u32 fvco, xin, xdiv, xdivr;
- u16 frac;
- u8 fa, fp, vco_sel, vco_cal;
- u8 regs[FC11_NR_REGS] = { };
-
- regs[FC11_REG_7] = 0x0F;
- regs[FC11_REG_8] = 0x3E;
- regs[FC11_REG_10] = 0xB8;
- regs[FC11_REG_11] = 0x80;
- regs[FC11_REG_RCCAL] = 0x04;
- err = fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
- err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
- err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
- err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
- err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
- if (err)
- return -EIO;
-
- /* Set VCO freq and VCO div */
- if (freq < 54000) {
- fvco = freq * 64;
- regs[FC11_REG_VCO] = 0x82;
- } else if (freq < 108000) {
- fvco = freq * 32;
- regs[FC11_REG_VCO] = 0x42;
- } else if (freq < 216000) {
- fvco = freq * 16;
- regs[FC11_REG_VCO] = 0x22;
- } else if (freq < 432000) {
- fvco = freq * 8;
- regs[FC11_REG_VCO] = 0x12;
- } else {
- fvco = freq * 4;
- regs[FC11_REG_VCO] = 0x0A;
- }
-
- /* Calc XIN. The PLL reference frequency is 18 MHz. */
- xdiv = fvco / 18000;
- frac = fvco - xdiv * 18000;
- frac = (frac << 15) / 18000;
- if (frac >= 16384)
- frac += 32786;
- if (!frac)
- xin = 0;
- else if (frac < 511)
- xin = 512;
- else if (frac < 65026)
- xin = frac;
- else
- xin = 65024;
- regs[FC11_REG_XINHI] = xin >> 8;
- regs[FC11_REG_XINLO] = xin;
-
- /* Calc FP and FA */
- xdivr = xdiv;
- if (fvco - xdiv * 18000 >= 9000)
- xdivr += 1; /* round */
- fp = xdivr / 8;
- fa = xdivr - fp * 8;
- if (fa < 2) {
- fp -= 1;
- fa += 8;
- }
- if (fp > 0x1F) {
- fp &= 0x1F;
- fa &= 0xF;
- }
- if (fa >= fp) {
- dev_warn(&priv->i2c->dev,
- "fa %02X >= fp %02X, but trying to continue\n",
- (unsigned int)(u8)fa, (unsigned int)(u8)fp);
- }
- regs[FC11_REG_FA] = fa;
- regs[FC11_REG_FP] = fp;
-
- /* Select bandwidth */
- switch (bandwidth) {
- case 8000:
- break;
- case 7000:
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M;
- break;
- default:
- dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. "
- "Using 6000 kHz.\n",
- bandwidth);
- bandwidth = 6000;
- /* fallthrough */
- case 6000:
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW6M;
- break;
- }
-
- /* Pre VCO select */
- if (fvco < 2320000) {
- vco_sel = 0;
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- } else if (fvco < 3080000) {
- vco_sel = 1;
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
- } else {
- vco_sel = 2;
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
- }
-
- /* Fix for low freqs */
- if (freq < 45000) {
- regs[FC11_REG_FA] = 0x6;
- regs[FC11_REG_FP] = 0x11;
- }
-
- /* Clock out fix */
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_CLKOUT;
-
- /* Write the cached registers */
- for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) {
- err = fc0011_writereg(priv, i, regs[i]);
- if (err)
- return err;
- }
-
- /* VCO calibration */
- err = fc0011_vcocal_trigger(priv);
- if (err)
- return err;
- err = fc0011_vcocal_read(priv, &vco_cal);
- if (err)
- return err;
- vco_retries = 0;
- while (!(vco_cal & FC11_VCOCAL_OK) && vco_retries < 3) {
- /* Reset the tuner and try again */
- err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
- FC0011_FE_CALLBACK_RESET, priv->addr);
- if (err) {
- dev_err(&priv->i2c->dev, "Failed to reset tuner\n");
- return err;
- }
- /* Reinit tuner config */
- err = 0;
- for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++)
- err |= fc0011_writereg(priv, i, regs[i]);
- err |= fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
- err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
- err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
- err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
- err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
- if (err)
- return -EIO;
- /* VCO calibration */
- err = fc0011_vcocal_trigger(priv);
- if (err)
- return err;
- err = fc0011_vcocal_read(priv, &vco_cal);
- if (err)
- return err;
- vco_retries++;
- }
- if (!(vco_cal & FC11_VCOCAL_OK)) {
- dev_err(&priv->i2c->dev,
- "Failed to read VCO calibration value (got %02X)\n",
- (unsigned int)vco_cal);
- return -EIO;
- }
- vco_cal &= FC11_VCOCAL_VALUEMASK;
-
- switch (vco_sel) {
- case 0:
- if (vco_cal < 8) {
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
- err = fc0011_writereg(priv, FC11_REG_VCOSEL,
- regs[FC11_REG_VCOSEL]);
- if (err)
- return err;
- err = fc0011_vcocal_trigger(priv);
- if (err)
- return err;
- } else {
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- err = fc0011_writereg(priv, FC11_REG_VCOSEL,
- regs[FC11_REG_VCOSEL]);
- if (err)
- return err;
- }
- break;
- case 1:
- if (vco_cal < 5) {
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
- err = fc0011_writereg(priv, FC11_REG_VCOSEL,
- regs[FC11_REG_VCOSEL]);
- if (err)
- return err;
- err = fc0011_vcocal_trigger(priv);
- if (err)
- return err;
- } else if (vco_cal <= 48) {
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
- err = fc0011_writereg(priv, FC11_REG_VCOSEL,
- regs[FC11_REG_VCOSEL]);
- if (err)
- return err;
- } else {
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- err = fc0011_writereg(priv, FC11_REG_VCOSEL,
- regs[FC11_REG_VCOSEL]);
- if (err)
- return err;
- err = fc0011_vcocal_trigger(priv);
- if (err)
- return err;
- }
- break;
- case 2:
- if (vco_cal > 53) {
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
- err = fc0011_writereg(priv, FC11_REG_VCOSEL,
- regs[FC11_REG_VCOSEL]);
- if (err)
- return err;
- err = fc0011_vcocal_trigger(priv);
- if (err)
- return err;
- } else {
- regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
- regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
- err = fc0011_writereg(priv, FC11_REG_VCOSEL,
- regs[FC11_REG_VCOSEL]);
- if (err)
- return err;
- }
- break;
- }
- err = fc0011_vcocal_read(priv, NULL);
- if (err)
- return err;
- usleep_range(10000, 50000);
-
- err = fc0011_readreg(priv, FC11_REG_RCCAL, ®s[FC11_REG_RCCAL]);
- if (err)
- return err;
- regs[FC11_REG_RCCAL] |= FC11_RCCAL_FORCE;
- err = fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
- if (err)
- return err;
- err = fc0011_writereg(priv, FC11_REG_16, 0xB);
- if (err)
- return err;
-
- dev_dbg(&priv->i2c->dev, "Tuned to "
- "fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X "
- "vcocal=%02X(%u) bw=%u\n",
- (unsigned int)regs[FC11_REG_FA],
- (unsigned int)regs[FC11_REG_FP],
- (unsigned int)regs[FC11_REG_XINHI],
- (unsigned int)regs[FC11_REG_XINLO],
- (unsigned int)regs[FC11_REG_VCO],
- (unsigned int)regs[FC11_REG_VCOSEL],
- (unsigned int)vco_cal, vco_retries,
- (unsigned int)bandwidth);
-
- priv->frequency = p->frequency;
- priv->bandwidth = p->bandwidth_hz;
-
- return 0;
-}
-
-static int fc0011_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct fc0011_priv *priv = fe->tuner_priv;
-
- *frequency = priv->frequency;
-
- return 0;
-}
-
-static int fc0011_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- *frequency = 0;
-
- return 0;
-}
-
-static int fc0011_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct fc0011_priv *priv = fe->tuner_priv;
-
- *bandwidth = priv->bandwidth;
-
- return 0;
-}
-
-static const struct dvb_tuner_ops fc0011_tuner_ops = {
- .info = {
- .name = "Fitipower FC0011",
-
- .frequency_min = 45000000,
- .frequency_max = 1000000000,
- },
-
- .release = fc0011_release,
- .init = fc0011_init,
-
- .set_params = fc0011_set_params,
-
- .get_frequency = fc0011_get_frequency,
- .get_if_frequency = fc0011_get_if_frequency,
- .get_bandwidth = fc0011_get_bandwidth,
-};
-
-struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- const struct fc0011_config *config)
-{
- struct fc0011_priv *priv;
-
- priv = kzalloc(sizeof(struct fc0011_priv), GFP_KERNEL);
- if (!priv)
- return NULL;
-
- priv->i2c = i2c;
- priv->addr = config->i2c_address;
-
- fe->tuner_priv = priv;
- fe->ops.tuner_ops = fc0011_tuner_ops;
-
- dev_info(&priv->i2c->dev, "Fitipower FC0011 tuner attached\n");
-
- return fe;
-}
-EXPORT_SYMBOL(fc0011_attach);
-
-MODULE_DESCRIPTION("Fitipower FC0011 silicon tuner driver");
-MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/fc0011.h b/drivers/media/common/tuners/fc0011.h
deleted file mode 100644
index 0ee581f..0000000
--- a/drivers/media/common/tuners/fc0011.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef LINUX_FC0011_H_
-#define LINUX_FC0011_H_
-
-#include "dvb_frontend.h"
-
-
-/** struct fc0011_config - fc0011 hardware config
- *
- * @i2c_address: I2C bus address.
- */
-struct fc0011_config {
- u8 i2c_address;
-};
-
-/** enum fc0011_fe_callback_commands - Frontend callbacks
- *
- * @FC0011_FE_CALLBACK_POWER: Power on tuner hardware.
- * @FC0011_FE_CALLBACK_RESET: Request a tuner reset.
- */
-enum fc0011_fe_callback_commands {
- FC0011_FE_CALLBACK_POWER,
- FC0011_FE_CALLBACK_RESET,
-};
-
-#if defined(CONFIG_MEDIA_TUNER_FC0011) ||\
- defined(CONFIG_MEDIA_TUNER_FC0011_MODULE)
-struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- const struct fc0011_config *config);
-#else
-static inline
-struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- const struct fc0011_config *config)
-{
- dev_err(&i2c->dev, "fc0011 driver disabled in Kconfig\n");
- return NULL;
-}
-#endif
-
-#endif /* LINUX_FC0011_H_ */
diff --git a/drivers/media/common/tuners/fc0012-priv.h b/drivers/media/common/tuners/fc0012-priv.h
deleted file mode 100644
index 4577c91..0000000
--- a/drivers/media/common/tuners/fc0012-priv.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Fitipower FC0012 tuner driver - private includes
- *
- * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _FC0012_PRIV_H_
-#define _FC0012_PRIV_H_
-
-#define LOG_PREFIX "fc0012"
-
-#undef err
-#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-struct fc0012_priv {
- struct i2c_adapter *i2c;
- u8 addr;
- u8 dual_master;
- u8 xtal_freq;
-
- u32 frequency;
- u32 bandwidth;
-};
-
-#endif
diff --git a/drivers/media/common/tuners/fc0012.c b/drivers/media/common/tuners/fc0012.c
deleted file mode 100644
index 308135a..0000000
--- a/drivers/media/common/tuners/fc0012.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * Fitipower FC0012 tuner driver
- *
- * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "fc0012.h"
-#include "fc0012-priv.h"
-
-static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
-{
- u8 buf[2] = {reg, val};
- struct i2c_msg msg = {
- .addr = priv->addr, .flags = 0, .buf = buf, .len = 2
- };
-
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- err("I2C write reg failed, reg: %02x, val: %02x", reg, val);
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
-{
- struct i2c_msg msg[2] = {
- { .addr = priv->addr, .flags = 0, .buf = ®, .len = 1 },
- { .addr = priv->addr, .flags = I2C_M_RD, .buf = val, .len = 1 },
- };
-
- if (i2c_transfer(priv->i2c, msg, 2) != 2) {
- err("I2C read reg failed, reg: %02x", reg);
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int fc0012_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static int fc0012_init(struct dvb_frontend *fe)
-{
- struct fc0012_priv *priv = fe->tuner_priv;
- int i, ret = 0;
- unsigned char reg[] = {
- 0x00, /* dummy reg. 0 */
- 0x05, /* reg. 0x01 */
- 0x10, /* reg. 0x02 */
- 0x00, /* reg. 0x03 */
- 0x00, /* reg. 0x04 */
- 0x0f, /* reg. 0x05: may also be 0x0a */
- 0x00, /* reg. 0x06: divider 2, VCO slow */
- 0x00, /* reg. 0x07: may also be 0x0f */
- 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
- Loop Bw 1/8 */
- 0x6e, /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
- 0xb8, /* reg. 0x0a: Disable LO Test Buffer */
- 0x82, /* reg. 0x0b: Output Clock is same as clock frequency,
- may also be 0x83 */
- 0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
- 0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
- 0x00, /* reg. 0x0e */
- 0x00, /* reg. 0x0f */
- 0x00, /* reg. 0x10: may also be 0x0d */
- 0x00, /* reg. 0x11 */
- 0x1f, /* reg. 0x12: Set to maximum gain */
- 0x08, /* reg. 0x13: Set to Middle Gain: 0x08,
- Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */
- 0x00, /* reg. 0x14 */
- 0x04, /* reg. 0x15: Enable LNA COMPS */
- };
-
- switch (priv->xtal_freq) {
- case FC_XTAL_27_MHZ:
- case FC_XTAL_28_8_MHZ:
- reg[0x07] |= 0x20;
- break;
- case FC_XTAL_36_MHZ:
- default:
- break;
- }
-
- if (priv->dual_master)
- reg[0x0c] |= 0x02;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- for (i = 1; i < sizeof(reg); i++) {
- ret = fc0012_writereg(priv, i, reg[i]);
- if (ret)
- break;
- }
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- if (ret)
- err("fc0012_writereg failed: %d", ret);
-
- return ret;
-}
-
-static int fc0012_sleep(struct dvb_frontend *fe)
-{
- /* nothing to do here */
- return 0;
-}
-
-static int fc0012_set_params(struct dvb_frontend *fe)
-{
- struct fc0012_priv *priv = fe->tuner_priv;
- int i, ret = 0;
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- u32 freq = p->frequency / 1000;
- u32 delsys = p->delivery_system;
- unsigned char reg[7], am, pm, multi, tmp;
- unsigned long f_vco;
- unsigned short xtal_freq_khz_2, xin, xdiv;
- int vco_select = false;
-
- if (fe->callback) {
- ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
- FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1));
- if (ret)
- goto exit;
- }
-
- switch (priv->xtal_freq) {
- case FC_XTAL_27_MHZ:
- xtal_freq_khz_2 = 27000 / 2;
- break;
- case FC_XTAL_36_MHZ:
- xtal_freq_khz_2 = 36000 / 2;
- break;
- case FC_XTAL_28_8_MHZ:
- default:
- xtal_freq_khz_2 = 28800 / 2;
- break;
- }
-
- /* select frequency divider and the frequency of VCO */
- if (freq < 37084) { /* freq * 96 < 3560000 */
- multi = 96;
- reg[5] = 0x82;
- reg[6] = 0x00;
- } else if (freq < 55625) { /* freq * 64 < 3560000 */
- multi = 64;
- reg[5] = 0x82;
- reg[6] = 0x02;
- } else if (freq < 74167) { /* freq * 48 < 3560000 */
- multi = 48;
- reg[5] = 0x42;
- reg[6] = 0x00;
- } else if (freq < 111250) { /* freq * 32 < 3560000 */
- multi = 32;
- reg[5] = 0x42;
- reg[6] = 0x02;
- } else if (freq < 148334) { /* freq * 24 < 3560000 */
- multi = 24;
- reg[5] = 0x22;
- reg[6] = 0x00;
- } else if (freq < 222500) { /* freq * 16 < 3560000 */
- multi = 16;
- reg[5] = 0x22;
- reg[6] = 0x02;
- } else if (freq < 296667) { /* freq * 12 < 3560000 */
- multi = 12;
- reg[5] = 0x12;
- reg[6] = 0x00;
- } else if (freq < 445000) { /* freq * 8 < 3560000 */
- multi = 8;
- reg[5] = 0x12;
- reg[6] = 0x02;
- } else if (freq < 593334) { /* freq * 6 < 3560000 */
- multi = 6;
- reg[5] = 0x0a;
- reg[6] = 0x00;
- } else {
- multi = 4;
- reg[5] = 0x0a;
- reg[6] = 0x02;
- }
-
- f_vco = freq * multi;
-
- if (f_vco >= 3060000) {
- reg[6] |= 0x08;
- vco_select = true;
- }
-
- if (freq >= 45000) {
- /* From divided value (XDIV) determined the FA and FP value */
- xdiv = (unsigned short)(f_vco / xtal_freq_khz_2);
- if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
- xdiv++;
-
- pm = (unsigned char)(xdiv / 8);
- am = (unsigned char)(xdiv - (8 * pm));
-
- if (am < 2) {
- reg[1] = am + 8;
- reg[2] = pm - 1;
- } else {
- reg[1] = am;
- reg[2] = pm;
- }
- } else {
- /* fix for frequency less than 45 MHz */
- reg[1] = 0x06;
- reg[2] = 0x11;
- }
-
- /* fix clock out */
- reg[6] |= 0x20;
-
- /* From VCO frequency determines the XIN ( fractional part of Delta
- Sigma PLL) and divided value (XDIV) */
- xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2);
- xin = (xin << 15) / xtal_freq_khz_2;
- if (xin >= 16384)
- xin += 32768;
-
- reg[3] = xin >> 8; /* xin with 9 bit resolution */
- reg[4] = xin & 0xff;
-
- if (delsys == SYS_DVBT) {
- reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
- switch (p->bandwidth_hz) {
- case 6000000:
- reg[6] |= 0x80;
- break;
- case 7000000:
- reg[6] |= 0x40;
- break;
- case 8000000:
- default:
- break;
- }
- } else {
- err("%s: modulation type not supported!", __func__);
- return -EINVAL;
- }
-
- /* modified for Realtek demod */
- reg[5] |= 0x07;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- for (i = 1; i <= 6; i++) {
- ret = fc0012_writereg(priv, i, reg[i]);
- if (ret)
- goto exit;
- }
-
- /* VCO Calibration */
- ret = fc0012_writereg(priv, 0x0e, 0x80);
- if (!ret)
- ret = fc0012_writereg(priv, 0x0e, 0x00);
-
- /* VCO Re-Calibration if needed */
- if (!ret)
- ret = fc0012_writereg(priv, 0x0e, 0x00);
-
- if (!ret) {
- msleep(10);
- ret = fc0012_readreg(priv, 0x0e, &tmp);
- }
- if (ret)
- goto exit;
-
- /* vco selection */
- tmp &= 0x3f;
-
- if (vco_select) {
- if (tmp > 0x3c) {
- reg[6] &= ~0x08;
- ret = fc0012_writereg(priv, 0x06, reg[6]);
- if (!ret)
- ret = fc0012_writereg(priv, 0x0e, 0x80);
- if (!ret)
- ret = fc0012_writereg(priv, 0x0e, 0x00);
- }
- } else {
- if (tmp < 0x02) {
- reg[6] |= 0x08;
- ret = fc0012_writereg(priv, 0x06, reg[6]);
- if (!ret)
- ret = fc0012_writereg(priv, 0x0e, 0x80);
- if (!ret)
- ret = fc0012_writereg(priv, 0x0e, 0x00);
- }
- }
-
- priv->frequency = p->frequency;
- priv->bandwidth = p->bandwidth_hz;
-
-exit:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
- if (ret)
- warn("%s: failed: %d", __func__, ret);
- return ret;
-}
-
-static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct fc0012_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- /* CHECK: always ? */
- *frequency = 0;
- return 0;
-}
-
-static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct fc0012_priv *priv = fe->tuner_priv;
- *bandwidth = priv->bandwidth;
- return 0;
-}
-
-#define INPUT_ADC_LEVEL -8
-
-static int fc0012_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
-{
- struct fc0012_priv *priv = fe->tuner_priv;
- int ret;
- unsigned char tmp;
- int int_temp, lna_gain, int_lna, tot_agc_gain, power;
- const int fc0012_lna_gain_table[] = {
- /* low gain */
- -63, -58, -99, -73,
- -63, -65, -54, -60,
- /* middle gain */
- 71, 70, 68, 67,
- 65, 63, 61, 58,
- /* high gain */
- 197, 191, 188, 186,
- 184, 182, 181, 179,
- };
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- ret = fc0012_writereg(priv, 0x12, 0x00);
- if (ret)
- goto err;
-
- ret = fc0012_readreg(priv, 0x12, &tmp);
- if (ret)
- goto err;
- int_temp = tmp;
-
- ret = fc0012_readreg(priv, 0x13, &tmp);
- if (ret)
- goto err;
- lna_gain = tmp & 0x1f;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- if (lna_gain < ARRAY_SIZE(fc0012_lna_gain_table)) {
- int_lna = fc0012_lna_gain_table[lna_gain];
- tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 +
- (int_temp & 0x1f)) * 2;
- power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10;
-
- if (power >= 45)
- *strength = 255; /* 100% */
- else if (power < -95)
- *strength = 0;
- else
- *strength = (power + 95) * 255 / 140;
-
- *strength |= *strength << 8;
- } else {
- ret = -1;
- }
-
- goto exit;
-
-err:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-exit:
- if (ret)
- warn("%s: failed: %d", __func__, ret);
- return ret;
-}
-
-static const struct dvb_tuner_ops fc0012_tuner_ops = {
- .info = {
- .name = "Fitipower FC0012",
-
- .frequency_min = 37000000, /* estimate */
- .frequency_max = 862000000, /* estimate */
- .frequency_step = 0,
- },
-
- .release = fc0012_release,
-
- .init = fc0012_init,
- .sleep = fc0012_sleep,
-
- .set_params = fc0012_set_params,
-
- .get_frequency = fc0012_get_frequency,
- .get_if_frequency = fc0012_get_if_frequency,
- .get_bandwidth = fc0012_get_bandwidth,
-
- .get_rf_strength = fc0012_get_rf_strength,
-};
-
-struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, u8 i2c_address, int dual_master,
- enum fc001x_xtal_freq xtal_freq)
-{
- struct fc0012_priv *priv = NULL;
-
- priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->i2c = i2c;
- priv->dual_master = dual_master;
- priv->addr = i2c_address;
- priv->xtal_freq = xtal_freq;
-
- info("Fitipower FC0012 successfully attached.");
-
- fe->tuner_priv = priv;
-
- memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- return fe;
-}
-EXPORT_SYMBOL(fc0012_attach);
-
-MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
-MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.6");
diff --git a/drivers/media/common/tuners/fc0012.h b/drivers/media/common/tuners/fc0012.h
deleted file mode 100644
index 4dbd5ef..0000000
--- a/drivers/media/common/tuners/fc0012.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Fitipower FC0012 tuner driver - include
- *
- * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _FC0012_H_
-#define _FC0012_H_
-
-#include "dvb_frontend.h"
-#include "fc001x-common.h"
-
-#if defined(CONFIG_MEDIA_TUNER_FC0012) || \
- (defined(CONFIG_MEDIA_TUNER_FC0012_MODULE) && defined(MODULE))
-extern struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- u8 i2c_address, int dual_master,
- enum fc001x_xtal_freq xtal_freq);
-#else
-static inline struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- u8 i2c_address, int dual_master,
- enum fc001x_xtal_freq xtal_freq)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/common/tuners/fc0013-priv.h b/drivers/media/common/tuners/fc0013-priv.h
deleted file mode 100644
index bfd49de..0000000
--- a/drivers/media/common/tuners/fc0013-priv.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Fitipower FC0013 tuner driver
- *
- * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _FC0013_PRIV_H_
-#define _FC0013_PRIV_H_
-
-#define LOG_PREFIX "fc0013"
-
-#undef err
-#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-struct fc0013_priv {
- struct i2c_adapter *i2c;
- u8 addr;
- u8 dual_master;
- u8 xtal_freq;
-
- u32 frequency;
- u32 bandwidth;
-};
-
-#endif
diff --git a/drivers/media/common/tuners/fc0013.c b/drivers/media/common/tuners/fc0013.c
deleted file mode 100644
index bd8f0f1..0000000
--- a/drivers/media/common/tuners/fc0013.c
+++ /dev/null
@@ -1,634 +0,0 @@
-/*
- * Fitipower FC0013 tuner driver
- *
- * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
- * partially based on driver code from Fitipower
- * Copyright (C) 2010 Fitipower Integrated Technology Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "fc0013.h"
-#include "fc0013-priv.h"
-
-static int fc0013_writereg(struct fc0013_priv *priv, u8 reg, u8 val)
-{
- u8 buf[2] = {reg, val};
- struct i2c_msg msg = {
- .addr = priv->addr, .flags = 0, .buf = buf, .len = 2
- };
-
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- err("I2C write reg failed, reg: %02x, val: %02x", reg, val);
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int fc0013_readreg(struct fc0013_priv *priv, u8 reg, u8 *val)
-{
- struct i2c_msg msg[2] = {
- { .addr = priv->addr, .flags = 0, .buf = ®, .len = 1 },
- { .addr = priv->addr, .flags = I2C_M_RD, .buf = val, .len = 1 },
- };
-
- if (i2c_transfer(priv->i2c, msg, 2) != 2) {
- err("I2C read reg failed, reg: %02x", reg);
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int fc0013_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static int fc0013_init(struct dvb_frontend *fe)
-{
- struct fc0013_priv *priv = fe->tuner_priv;
- int i, ret = 0;
- unsigned char reg[] = {
- 0x00, /* reg. 0x00: dummy */
- 0x09, /* reg. 0x01 */
- 0x16, /* reg. 0x02 */
- 0x00, /* reg. 0x03 */
- 0x00, /* reg. 0x04 */
- 0x17, /* reg. 0x05 */
- 0x02, /* reg. 0x06 */
- 0x0a, /* reg. 0x07: CHECK */
- 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
- Loop Bw 1/8 */
- 0x6f, /* reg. 0x09: enable LoopThrough */
- 0xb8, /* reg. 0x0a: Disable LO Test Buffer */
- 0x82, /* reg. 0x0b: CHECK */
- 0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
- 0x01, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, may need 0x02 */
- 0x00, /* reg. 0x0e */
- 0x00, /* reg. 0x0f */
- 0x00, /* reg. 0x10 */
- 0x00, /* reg. 0x11 */
- 0x00, /* reg. 0x12 */
- 0x00, /* reg. 0x13 */
- 0x50, /* reg. 0x14: DVB-t High Gain, UHF.
- Middle Gain: 0x48, Low Gain: 0x40 */
- 0x01, /* reg. 0x15 */
- };
-
- switch (priv->xtal_freq) {
- case FC_XTAL_27_MHZ:
- case FC_XTAL_28_8_MHZ:
- reg[0x07] |= 0x20;
- break;
- case FC_XTAL_36_MHZ:
- default:
- break;
- }
-
- if (priv->dual_master)
- reg[0x0c] |= 0x02;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- for (i = 1; i < sizeof(reg); i++) {
- ret = fc0013_writereg(priv, i, reg[i]);
- if (ret)
- break;
- }
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- if (ret)
- err("fc0013_writereg failed: %d", ret);
-
- return ret;
-}
-
-static int fc0013_sleep(struct dvb_frontend *fe)
-{
- /* nothing to do here */
- return 0;
-}
-
-int fc0013_rc_cal_add(struct dvb_frontend *fe, int rc_val)
-{
- struct fc0013_priv *priv = fe->tuner_priv;
- int ret;
- u8 rc_cal;
- int val;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- /* push rc_cal value, get rc_cal value */
- ret = fc0013_writereg(priv, 0x10, 0x00);
- if (ret)
- goto error_out;
-
- /* get rc_cal value */
- ret = fc0013_readreg(priv, 0x10, &rc_cal);
- if (ret)
- goto error_out;
-
- rc_cal &= 0x0f;
-
- val = (int)rc_cal + rc_val;
-
- /* forcing rc_cal */
- ret = fc0013_writereg(priv, 0x0d, 0x11);
- if (ret)
- goto error_out;
-
- /* modify rc_cal value */
- if (val > 15)
- ret = fc0013_writereg(priv, 0x10, 0x0f);
- else if (val < 0)
- ret = fc0013_writereg(priv, 0x10, 0x00);
- else
- ret = fc0013_writereg(priv, 0x10, (u8)val);
-
-error_out:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- return ret;
-}
-EXPORT_SYMBOL(fc0013_rc_cal_add);
-
-int fc0013_rc_cal_reset(struct dvb_frontend *fe)
-{
- struct fc0013_priv *priv = fe->tuner_priv;
- int ret;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- ret = fc0013_writereg(priv, 0x0d, 0x01);
- if (!ret)
- ret = fc0013_writereg(priv, 0x10, 0x00);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- return ret;
-}
-EXPORT_SYMBOL(fc0013_rc_cal_reset);
-
-static int fc0013_set_vhf_track(struct fc0013_priv *priv, u32 freq)
-{
- int ret;
- u8 tmp;
-
- ret = fc0013_readreg(priv, 0x1d, &tmp);
- if (ret)
- goto error_out;
- tmp &= 0xe3;
- if (freq <= 177500) { /* VHF Track: 7 */
- ret = fc0013_writereg(priv, 0x1d, tmp | 0x1c);
- } else if (freq <= 184500) { /* VHF Track: 6 */
- ret = fc0013_writereg(priv, 0x1d, tmp | 0x18);
- } else if (freq <= 191500) { /* VHF Track: 5 */
- ret = fc0013_writereg(priv, 0x1d, tmp | 0x14);
- } else if (freq <= 198500) { /* VHF Track: 4 */
- ret = fc0013_writereg(priv, 0x1d, tmp | 0x10);
- } else if (freq <= 205500) { /* VHF Track: 3 */
- ret = fc0013_writereg(priv, 0x1d, tmp | 0x0c);
- } else if (freq <= 219500) { /* VHF Track: 2 */
- ret = fc0013_writereg(priv, 0x1d, tmp | 0x08);
- } else if (freq < 300000) { /* VHF Track: 1 */
- ret = fc0013_writereg(priv, 0x1d, tmp | 0x04);
- } else { /* UHF and GPS */
- ret = fc0013_writereg(priv, 0x1d, tmp | 0x1c);
- }
- if (ret)
- goto error_out;
-error_out:
- return ret;
-}
-
-static int fc0013_set_params(struct dvb_frontend *fe)
-{
- struct fc0013_priv *priv = fe->tuner_priv;
- int i, ret = 0;
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- u32 freq = p->frequency / 1000;
- u32 delsys = p->delivery_system;
- unsigned char reg[7], am, pm, multi, tmp;
- unsigned long f_vco;
- unsigned short xtal_freq_khz_2, xin, xdiv;
- int vco_select = false;
-
- if (fe->callback) {
- ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
- FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1));
- if (ret)
- goto exit;
- }
-
- switch (priv->xtal_freq) {
- case FC_XTAL_27_MHZ:
- xtal_freq_khz_2 = 27000 / 2;
- break;
- case FC_XTAL_36_MHZ:
- xtal_freq_khz_2 = 36000 / 2;
- break;
- case FC_XTAL_28_8_MHZ:
- default:
- xtal_freq_khz_2 = 28800 / 2;
- break;
- }
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- /* set VHF track */
- ret = fc0013_set_vhf_track(priv, freq);
- if (ret)
- goto exit;
-
- if (freq < 300000) {
- /* enable VHF filter */
- ret = fc0013_readreg(priv, 0x07, &tmp);
- if (ret)
- goto exit;
- ret = fc0013_writereg(priv, 0x07, tmp | 0x10);
- if (ret)
- goto exit;
-
- /* disable UHF & disable GPS */
- ret = fc0013_readreg(priv, 0x14, &tmp);
- if (ret)
- goto exit;
- ret = fc0013_writereg(priv, 0x14, tmp & 0x1f);
- if (ret)
- goto exit;
- } else if (freq <= 862000) {
- /* disable VHF filter */
- ret = fc0013_readreg(priv, 0x07, &tmp);
- if (ret)
- goto exit;
- ret = fc0013_writereg(priv, 0x07, tmp & 0xef);
- if (ret)
- goto exit;
-
- /* enable UHF & disable GPS */
- ret = fc0013_readreg(priv, 0x14, &tmp);
- if (ret)
- goto exit;
- ret = fc0013_writereg(priv, 0x14, (tmp & 0x1f) | 0x40);
- if (ret)
- goto exit;
- } else {
- /* disable VHF filter */
- ret = fc0013_readreg(priv, 0x07, &tmp);
- if (ret)
- goto exit;
- ret = fc0013_writereg(priv, 0x07, tmp & 0xef);
- if (ret)
- goto exit;
-
- /* disable UHF & enable GPS */
- ret = fc0013_readreg(priv, 0x14, &tmp);
- if (ret)
- goto exit;
- ret = fc0013_writereg(priv, 0x14, (tmp & 0x1f) | 0x20);
- if (ret)
- goto exit;
- }
-
- /* select frequency divider and the frequency of VCO */
- if (freq < 37084) { /* freq * 96 < 3560000 */
- multi = 96;
- reg[5] = 0x82;
- reg[6] = 0x00;
- } else if (freq < 55625) { /* freq * 64 < 3560000 */
- multi = 64;
- reg[5] = 0x02;
- reg[6] = 0x02;
- } else if (freq < 74167) { /* freq * 48 < 3560000 */
- multi = 48;
- reg[5] = 0x42;
- reg[6] = 0x00;
- } else if (freq < 111250) { /* freq * 32 < 3560000 */
- multi = 32;
- reg[5] = 0x82;
- reg[6] = 0x02;
- } else if (freq < 148334) { /* freq * 24 < 3560000 */
- multi = 24;
- reg[5] = 0x22;
- reg[6] = 0x00;
- } else if (freq < 222500) { /* freq * 16 < 3560000 */
- multi = 16;
- reg[5] = 0x42;
- reg[6] = 0x02;
- } else if (freq < 296667) { /* freq * 12 < 3560000 */
- multi = 12;
- reg[5] = 0x12;
- reg[6] = 0x00;
- } else if (freq < 445000) { /* freq * 8 < 3560000 */
- multi = 8;
- reg[5] = 0x22;
- reg[6] = 0x02;
- } else if (freq < 593334) { /* freq * 6 < 3560000 */
- multi = 6;
- reg[5] = 0x0a;
- reg[6] = 0x00;
- } else if (freq < 950000) { /* freq * 4 < 3800000 */
- multi = 4;
- reg[5] = 0x12;
- reg[6] = 0x02;
- } else {
- multi = 2;
- reg[5] = 0x0a;
- reg[6] = 0x02;
- }
-
- f_vco = freq * multi;
-
- if (f_vco >= 3060000) {
- reg[6] |= 0x08;
- vco_select = true;
- }
-
- if (freq >= 45000) {
- /* From divided value (XDIV) determined the FA and FP value */
- xdiv = (unsigned short)(f_vco / xtal_freq_khz_2);
- if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
- xdiv++;
-
- pm = (unsigned char)(xdiv / 8);
- am = (unsigned char)(xdiv - (8 * pm));
-
- if (am < 2) {
- reg[1] = am + 8;
- reg[2] = pm - 1;
- } else {
- reg[1] = am;
- reg[2] = pm;
- }
- } else {
- /* fix for frequency less than 45 MHz */
- reg[1] = 0x06;
- reg[2] = 0x11;
- }
-
- /* fix clock out */
- reg[6] |= 0x20;
-
- /* From VCO frequency determines the XIN ( fractional part of Delta
- Sigma PLL) and divided value (XDIV) */
- xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2);
- xin = (xin << 15) / xtal_freq_khz_2;
- if (xin >= 16384)
- xin += 32768;
-
- reg[3] = xin >> 8;
- reg[4] = xin & 0xff;
-
- if (delsys == SYS_DVBT) {
- reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
- switch (p->bandwidth_hz) {
- case 6000000:
- reg[6] |= 0x80;
- break;
- case 7000000:
- reg[6] |= 0x40;
- break;
- case 8000000:
- default:
- break;
- }
- } else {
- err("%s: modulation type not supported!", __func__);
- return -EINVAL;
- }
-
- /* modified for Realtek demod */
- reg[5] |= 0x07;
-
- for (i = 1; i <= 6; i++) {
- ret = fc0013_writereg(priv, i, reg[i]);
- if (ret)
- goto exit;
- }
-
- ret = fc0013_readreg(priv, 0x11, &tmp);
- if (ret)
- goto exit;
- if (multi == 64)
- ret = fc0013_writereg(priv, 0x11, tmp | 0x04);
- else
- ret = fc0013_writereg(priv, 0x11, tmp & 0xfb);
- if (ret)
- goto exit;
-
- /* VCO Calibration */
- ret = fc0013_writereg(priv, 0x0e, 0x80);
- if (!ret)
- ret = fc0013_writereg(priv, 0x0e, 0x00);
-
- /* VCO Re-Calibration if needed */
- if (!ret)
- ret = fc0013_writereg(priv, 0x0e, 0x00);
-
- if (!ret) {
- msleep(10);
- ret = fc0013_readreg(priv, 0x0e, &tmp);
- }
- if (ret)
- goto exit;
-
- /* vco selection */
- tmp &= 0x3f;
-
- if (vco_select) {
- if (tmp > 0x3c) {
- reg[6] &= ~0x08;
- ret = fc0013_writereg(priv, 0x06, reg[6]);
- if (!ret)
- ret = fc0013_writereg(priv, 0x0e, 0x80);
- if (!ret)
- ret = fc0013_writereg(priv, 0x0e, 0x00);
- }
- } else {
- if (tmp < 0x02) {
- reg[6] |= 0x08;
- ret = fc0013_writereg(priv, 0x06, reg[6]);
- if (!ret)
- ret = fc0013_writereg(priv, 0x0e, 0x80);
- if (!ret)
- ret = fc0013_writereg(priv, 0x0e, 0x00);
- }
- }
-
- priv->frequency = p->frequency;
- priv->bandwidth = p->bandwidth_hz;
-
-exit:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
- if (ret)
- warn("%s: failed: %d", __func__, ret);
- return ret;
-}
-
-static int fc0013_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct fc0013_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static int fc0013_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- /* always ? */
- *frequency = 0;
- return 0;
-}
-
-static int fc0013_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct fc0013_priv *priv = fe->tuner_priv;
- *bandwidth = priv->bandwidth;
- return 0;
-}
-
-#define INPUT_ADC_LEVEL -8
-
-static int fc0013_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
-{
- struct fc0013_priv *priv = fe->tuner_priv;
- int ret;
- unsigned char tmp;
- int int_temp, lna_gain, int_lna, tot_agc_gain, power;
- const int fc0013_lna_gain_table[] = {
- /* low gain */
- -63, -58, -99, -73,
- -63, -65, -54, -60,
- /* middle gain */
- 71, 70, 68, 67,
- 65, 63, 61, 58,
- /* high gain */
- 197, 191, 188, 186,
- 184, 182, 181, 179,
- };
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- ret = fc0013_writereg(priv, 0x13, 0x00);
- if (ret)
- goto err;
-
- ret = fc0013_readreg(priv, 0x13, &tmp);
- if (ret)
- goto err;
- int_temp = tmp;
-
- ret = fc0013_readreg(priv, 0x14, &tmp);
- if (ret)
- goto err;
- lna_gain = tmp & 0x1f;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- if (lna_gain < ARRAY_SIZE(fc0013_lna_gain_table)) {
- int_lna = fc0013_lna_gain_table[lna_gain];
- tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 +
- (int_temp & 0x1f)) * 2;
- power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10;
-
- if (power >= 45)
- *strength = 255; /* 100% */
- else if (power < -95)
- *strength = 0;
- else
- *strength = (power + 95) * 255 / 140;
-
- *strength |= *strength << 8;
- } else {
- ret = -1;
- }
-
- goto exit;
-
-err:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-exit:
- if (ret)
- warn("%s: failed: %d", __func__, ret);
- return ret;
-}
-
-static const struct dvb_tuner_ops fc0013_tuner_ops = {
- .info = {
- .name = "Fitipower FC0013",
-
- .frequency_min = 37000000, /* estimate */
- .frequency_max = 1680000000, /* CHECK */
- .frequency_step = 0,
- },
-
- .release = fc0013_release,
-
- .init = fc0013_init,
- .sleep = fc0013_sleep,
-
- .set_params = fc0013_set_params,
-
- .get_frequency = fc0013_get_frequency,
- .get_if_frequency = fc0013_get_if_frequency,
- .get_bandwidth = fc0013_get_bandwidth,
-
- .get_rf_strength = fc0013_get_rf_strength,
-};
-
-struct dvb_frontend *fc0013_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, u8 i2c_address, int dual_master,
- enum fc001x_xtal_freq xtal_freq)
-{
- struct fc0013_priv *priv = NULL;
-
- priv = kzalloc(sizeof(struct fc0013_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->i2c = i2c;
- priv->dual_master = dual_master;
- priv->addr = i2c_address;
- priv->xtal_freq = xtal_freq;
-
- info("Fitipower FC0013 successfully attached.");
-
- fe->tuner_priv = priv;
-
- memcpy(&fe->ops.tuner_ops, &fc0013_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- return fe;
-}
-EXPORT_SYMBOL(fc0013_attach);
-
-MODULE_DESCRIPTION("Fitipower FC0013 silicon tuner driver");
-MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.2");
diff --git a/drivers/media/common/tuners/fc0013.h b/drivers/media/common/tuners/fc0013.h
deleted file mode 100644
index 594efd6..0000000
--- a/drivers/media/common/tuners/fc0013.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Fitipower FC0013 tuner driver
- *
- * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _FC0013_H_
-#define _FC0013_H_
-
-#include "dvb_frontend.h"
-#include "fc001x-common.h"
-
-#if defined(CONFIG_MEDIA_TUNER_FC0013) || \
- (defined(CONFIG_MEDIA_TUNER_FC0013_MODULE) && defined(MODULE))
-extern struct dvb_frontend *fc0013_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- u8 i2c_address, int dual_master,
- enum fc001x_xtal_freq xtal_freq);
-extern int fc0013_rc_cal_add(struct dvb_frontend *fe, int rc_val);
-extern int fc0013_rc_cal_reset(struct dvb_frontend *fe);
-#else
-static inline struct dvb_frontend *fc0013_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- u8 i2c_address, int dual_master,
- enum fc001x_xtal_freq xtal_freq)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-
-static inline int fc0013_rc_cal_add(struct dvb_frontend *fe, int rc_val)
-{
- return 0;
-}
-
-static inline int fc0013_rc_cal_reset(struct dvb_frontend *fe)
-{
- return 0;
-}
-#endif
-
-#endif
diff --git a/drivers/media/common/tuners/fc001x-common.h b/drivers/media/common/tuners/fc001x-common.h
deleted file mode 100644
index 7188181..0000000
--- a/drivers/media/common/tuners/fc001x-common.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Fitipower FC0012 & FC0013 tuner driver - common defines
- *
- * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _FC001X_COMMON_H_
-#define _FC001X_COMMON_H_
-
-enum fc001x_xtal_freq {
- FC_XTAL_27_MHZ, /* 27000000 */
- FC_XTAL_28_8_MHZ, /* 28800000 */
- FC_XTAL_36_MHZ, /* 36000000 */
-};
-
-/*
- * enum fc001x_fe_callback_commands - Frontend callbacks
- *
- * @FC_FE_CALLBACK_VHF_ENABLE: enable VHF or UHF
- */
-enum fc001x_fe_callback_commands {
- FC_FE_CALLBACK_VHF_ENABLE,
-};
-
-#endif
diff --git a/drivers/media/common/tuners/max2165.c b/drivers/media/common/tuners/max2165.c
deleted file mode 100644
index ba84936..0000000
--- a/drivers/media/common/tuners/max2165.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * Driver for Maxim MAX2165 silicon tuner
- *
- * Copyright (c) 2009 David T. L. Wong <davidtlwong@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/videodev2.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-
-#include "max2165.h"
-#include "max2165_priv.h"
-#include "tuner-i2c.h"
-
-#define dprintk(args...) \
- do { \
- if (debug) \
- printk(KERN_DEBUG "max2165: " args); \
- } while (0)
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-static int max2165_write_reg(struct max2165_priv *priv, u8 reg, u8 data)
-{
- int ret;
- u8 buf[] = { reg, data };
- struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
-
- msg.addr = priv->config->i2c_address;
-
- if (debug >= 2)
- dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
-
- ret = i2c_transfer(priv->i2c, &msg, 1);
-
- if (ret != 1)
- dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
- __func__, reg, data, ret);
-
- return (ret != 1) ? -EIO : 0;
-}
-
-static int max2165_read_reg(struct max2165_priv *priv, u8 reg, u8 *p_data)
-{
- int ret;
- u8 dev_addr = priv->config->i2c_address;
-
- u8 b0[] = { reg };
- u8 b1[] = { 0 };
- struct i2c_msg msg[] = {
- { .addr = dev_addr, .flags = 0, .buf = b0, .len = 1 },
- { .addr = dev_addr, .flags = I2C_M_RD, .buf = b1, .len = 1 },
- };
-
- ret = i2c_transfer(priv->i2c, msg, 2);
- if (ret != 2) {
- dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
- return -EIO;
- }
-
- *p_data = b1[0];
- if (debug >= 2)
- dprintk("%s: reg=0x%02X, data=0x%02X\n",
- __func__, reg, b1[0]);
- return 0;
-}
-
-static int max2165_mask_write_reg(struct max2165_priv *priv, u8 reg,
- u8 mask, u8 data)
-{
- int ret;
- u8 v;
-
- data &= mask;
- ret = max2165_read_reg(priv, reg, &v);
- if (ret != 0)
- return ret;
- v &= ~mask;
- v |= data;
- ret = max2165_write_reg(priv, reg, v);
-
- return ret;
-}
-
-static int max2165_read_rom_table(struct max2165_priv *priv)
-{
- u8 dat[3];
- int i;
-
- for (i = 0; i < 3; i++) {
- max2165_write_reg(priv, REG_ROM_TABLE_ADDR, i + 1);
- max2165_read_reg(priv, REG_ROM_TABLE_DATA, &dat[i]);
- }
-
- priv->tf_ntch_low_cfg = dat[0] >> 4;
- priv->tf_ntch_hi_cfg = dat[0] & 0x0F;
- priv->tf_balun_low_ref = dat[1] & 0x0F;
- priv->tf_balun_hi_ref = dat[1] >> 4;
- priv->bb_filter_7mhz_cfg = dat[2] & 0x0F;
- priv->bb_filter_8mhz_cfg = dat[2] >> 4;
-
- dprintk("tf_ntch_low_cfg = 0x%X\n", priv->tf_ntch_low_cfg);
- dprintk("tf_ntch_hi_cfg = 0x%X\n", priv->tf_ntch_hi_cfg);
- dprintk("tf_balun_low_ref = 0x%X\n", priv->tf_balun_low_ref);
- dprintk("tf_balun_hi_ref = 0x%X\n", priv->tf_balun_hi_ref);
- dprintk("bb_filter_7mhz_cfg = 0x%X\n", priv->bb_filter_7mhz_cfg);
- dprintk("bb_filter_8mhz_cfg = 0x%X\n", priv->bb_filter_8mhz_cfg);
-
- return 0;
-}
-
-static int max2165_set_osc(struct max2165_priv *priv, u8 osc /*MHz*/)
-{
- u8 v;
-
- v = (osc / 2);
- if (v == 2)
- v = 0x7;
- else
- v -= 8;
-
- max2165_mask_write_reg(priv, REG_PLL_CFG, 0x07, v);
-
- return 0;
-}
-
-static int max2165_set_bandwidth(struct max2165_priv *priv, u32 bw)
-{
- u8 val;
-
- if (bw == 8000000)
- val = priv->bb_filter_8mhz_cfg;
- else
- val = priv->bb_filter_7mhz_cfg;
-
- max2165_mask_write_reg(priv, REG_BASEBAND_CTRL, 0xF0, val << 4);
-
- return 0;
-}
-
-int fixpt_div32(u32 dividend, u32 divisor, u32 *quotient, u32 *fraction)
-{
- u32 remainder;
- u32 q, f = 0;
- int i;
-
- if (0 == divisor)
- return -EINVAL;
-
- q = dividend / divisor;
- remainder = dividend - q * divisor;
-
- for (i = 0; i < 31; i++) {
- remainder <<= 1;
- if (remainder >= divisor) {
- f += 1;
- remainder -= divisor;
- }
- f <<= 1;
- }
-
- *quotient = q;
- *fraction = f;
-
- return 0;
-}
-
-static int max2165_set_rf(struct max2165_priv *priv, u32 freq)
-{
- u8 tf;
- u8 tf_ntch;
- u32 t;
- u32 quotient, fraction;
- int ret;
-
- /* Set PLL divider according to RF frequency */
- ret = fixpt_div32(freq / 1000, priv->config->osc_clk * 1000,
- "ient, &fraction);
- if (ret != 0)
- return ret;
-
- /* 20-bit fraction */
- fraction >>= 12;
-
- max2165_write_reg(priv, REG_NDIV_INT, quotient);
- max2165_mask_write_reg(priv, REG_NDIV_FRAC2, 0x0F, fraction >> 16);
- max2165_write_reg(priv, REG_NDIV_FRAC1, fraction >> 8);
- max2165_write_reg(priv, REG_NDIV_FRAC0, fraction);
-
- /* Norch Filter */
- tf_ntch = (freq < 725000000) ?
- priv->tf_ntch_low_cfg : priv->tf_ntch_hi_cfg;
-
- /* Tracking filter balun */
- t = priv->tf_balun_low_ref;
- t += (priv->tf_balun_hi_ref - priv->tf_balun_low_ref)
- * (freq / 1000 - 470000) / (780000 - 470000);
-
- tf = t;
- dprintk("tf = %X\n", tf);
- tf |= tf_ntch << 4;
-
- max2165_write_reg(priv, REG_TRACK_FILTER, tf);
-
- return 0;
-}
-
-static void max2165_debug_status(struct max2165_priv *priv)
-{
- u8 status, autotune;
- u8 auto_vco_success, auto_vco_active;
- u8 pll_locked;
- u8 dc_offset_low, dc_offset_hi;
- u8 signal_lv_over_threshold;
- u8 vco, vco_sub_band, adc;
-
- max2165_read_reg(priv, REG_STATUS, &status);
- max2165_read_reg(priv, REG_AUTOTUNE, &autotune);
-
- auto_vco_success = (status >> 6) & 0x01;
- auto_vco_active = (status >> 5) & 0x01;
- pll_locked = (status >> 4) & 0x01;
- dc_offset_low = (status >> 3) & 0x01;
- dc_offset_hi = (status >> 2) & 0x01;
- signal_lv_over_threshold = status & 0x01;
-
- vco = autotune >> 6;
- vco_sub_band = (autotune >> 3) & 0x7;
- adc = autotune & 0x7;
-
- dprintk("auto VCO active: %d, auto VCO success: %d\n",
- auto_vco_active, auto_vco_success);
- dprintk("PLL locked: %d\n", pll_locked);
- dprintk("DC offset low: %d, DC offset high: %d\n",
- dc_offset_low, dc_offset_hi);
- dprintk("Signal lvl over threshold: %d\n", signal_lv_over_threshold);
- dprintk("VCO: %d, VCO Sub-band: %d, ADC: %d\n", vco, vco_sub_band, adc);
-}
-
-static int max2165_set_params(struct dvb_frontend *fe)
-{
- struct max2165_priv *priv = fe->tuner_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- int ret;
-
- switch (c->bandwidth_hz) {
- case 7000000:
- case 8000000:
- priv->frequency = c->frequency;
- break;
- default:
- printk(KERN_INFO "MAX2165: bandwidth %d Hz not supported.\n",
- c->bandwidth_hz);
- return -EINVAL;
- }
-
- dprintk("%s() frequency=%d\n", __func__, c->frequency);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- max2165_set_bandwidth(priv, c->bandwidth_hz);
- ret = max2165_set_rf(priv, priv->frequency);
- mdelay(50);
- max2165_debug_status(priv);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- if (ret != 0)
- return -EREMOTEIO;
-
- return 0;
-}
-
-static int max2165_get_frequency(struct dvb_frontend *fe, u32 *freq)
-{
- struct max2165_priv *priv = fe->tuner_priv;
- dprintk("%s()\n", __func__);
- *freq = priv->frequency;
- return 0;
-}
-
-static int max2165_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
-{
- struct max2165_priv *priv = fe->tuner_priv;
- dprintk("%s()\n", __func__);
-
- *bw = priv->bandwidth;
- return 0;
-}
-
-static int max2165_get_status(struct dvb_frontend *fe, u32 *status)
-{
- struct max2165_priv *priv = fe->tuner_priv;
- u16 lock_status = 0;
-
- dprintk("%s()\n", __func__);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- max2165_debug_status(priv);
- *status = lock_status;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return 0;
-}
-
-static int max2165_sleep(struct dvb_frontend *fe)
-{
- dprintk("%s()\n", __func__);
- return 0;
-}
-
-static int max2165_init(struct dvb_frontend *fe)
-{
- struct max2165_priv *priv = fe->tuner_priv;
- dprintk("%s()\n", __func__);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- /* Setup initial values */
- /* Fractional Mode on */
- max2165_write_reg(priv, REG_NDIV_FRAC2, 0x18);
- /* LNA on */
- max2165_write_reg(priv, REG_LNA, 0x01);
- max2165_write_reg(priv, REG_PLL_CFG, 0x7A);
- max2165_write_reg(priv, REG_TEST, 0x08);
- max2165_write_reg(priv, REG_SHUTDOWN, 0x40);
- max2165_write_reg(priv, REG_VCO_CTRL, 0x84);
- max2165_write_reg(priv, REG_BASEBAND_CTRL, 0xC3);
- max2165_write_reg(priv, REG_DC_OFFSET_CTRL, 0x75);
- max2165_write_reg(priv, REG_DC_OFFSET_DAC, 0x00);
- max2165_write_reg(priv, REG_ROM_TABLE_ADDR, 0x00);
-
- max2165_set_osc(priv, priv->config->osc_clk);
-
- max2165_read_rom_table(priv);
-
- max2165_set_bandwidth(priv, 8000000);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return 0;
-}
-
-static int max2165_release(struct dvb_frontend *fe)
-{
- struct max2165_priv *priv = fe->tuner_priv;
- dprintk("%s()\n", __func__);
-
- kfree(priv);
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static const struct dvb_tuner_ops max2165_tuner_ops = {
- .info = {
- .name = "Maxim MAX2165",
- .frequency_min = 470000000,
- .frequency_max = 780000000,
- .frequency_step = 50000,
- },
-
- .release = max2165_release,
- .init = max2165_init,
- .sleep = max2165_sleep,
-
- .set_params = max2165_set_params,
- .set_analog_params = NULL,
- .get_frequency = max2165_get_frequency,
- .get_bandwidth = max2165_get_bandwidth,
- .get_status = max2165_get_status
-};
-
-struct dvb_frontend *max2165_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct max2165_config *cfg)
-{
- struct max2165_priv *priv = NULL;
-
- dprintk("%s(%d-%04x)\n", __func__,
- i2c ? i2c_adapter_id(i2c) : -1,
- cfg ? cfg->i2c_address : -1);
-
- priv = kzalloc(sizeof(struct max2165_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- memcpy(&fe->ops.tuner_ops, &max2165_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- priv->config = cfg;
- priv->i2c = i2c;
- fe->tuner_priv = priv;
-
- max2165_init(fe);
- max2165_debug_status(priv);
-
- return fe;
-}
-EXPORT_SYMBOL(max2165_attach);
-
-MODULE_AUTHOR("David T. L. Wong <davidtlwong@gmail.com>");
-MODULE_DESCRIPTION("Maxim MAX2165 silicon tuner driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/max2165.h b/drivers/media/common/tuners/max2165.h
deleted file mode 100644
index c063c36..0000000
--- a/drivers/media/common/tuners/max2165.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Driver for Maxim MAX2165 silicon tuner
- *
- * Copyright (c) 2009 David T. L. Wong <davidtlwong@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MAX2165_H__
-#define __MAX2165_H__
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-struct max2165_config {
- u8 i2c_address;
- u8 osc_clk; /* in MHz, selectable values: 4,16,18,20,22,24,26,28 */
-};
-
-#if defined(CONFIG_MEDIA_TUNER_MAX2165) || \
- (defined(CONFIG_MEDIA_TUNER_MAX2165_MODULE) && defined(MODULE))
-extern struct dvb_frontend *max2165_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct max2165_config *cfg);
-#else
-static inline struct dvb_frontend *max2165_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct max2165_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/common/tuners/max2165_priv.h b/drivers/media/common/tuners/max2165_priv.h
deleted file mode 100644
index 91bbe02..0000000
--- a/drivers/media/common/tuners/max2165_priv.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Driver for Maxim MAX2165 silicon tuner
- *
- * Copyright (c) 2009 David T. L. Wong <davidtlwong@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MAX2165_PRIV_H__
-#define __MAX2165_PRIV_H__
-
-#define REG_NDIV_INT 0x00
-#define REG_NDIV_FRAC2 0x01
-#define REG_NDIV_FRAC1 0x02
-#define REG_NDIV_FRAC0 0x03
-#define REG_TRACK_FILTER 0x04
-#define REG_LNA 0x05
-#define REG_PLL_CFG 0x06
-#define REG_TEST 0x07
-#define REG_SHUTDOWN 0x08
-#define REG_VCO_CTRL 0x09
-#define REG_BASEBAND_CTRL 0x0A
-#define REG_DC_OFFSET_CTRL 0x0B
-#define REG_DC_OFFSET_DAC 0x0C
-#define REG_ROM_TABLE_ADDR 0x0D
-
-/* Read Only Registers */
-#define REG_ROM_TABLE_DATA 0x10
-#define REG_STATUS 0x11
-#define REG_AUTOTUNE 0x12
-
-struct max2165_priv {
- struct max2165_config *config;
- struct i2c_adapter *i2c;
-
- u32 frequency;
- u32 bandwidth;
-
- u8 tf_ntch_low_cfg;
- u8 tf_ntch_hi_cfg;
- u8 tf_balun_low_ref;
- u8 tf_balun_hi_ref;
- u8 bb_filter_7mhz_cfg;
- u8 bb_filter_8mhz_cfg;
-};
-
-#endif
diff --git a/drivers/media/common/tuners/mc44s803.c b/drivers/media/common/tuners/mc44s803.c
deleted file mode 100644
index 5ddce7e..0000000
--- a/drivers/media/common/tuners/mc44s803.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * Driver for Freescale MC44S803 Low Power CMOS Broadband Tuner
- *
- * Copyright (c) 2009 Jochen Friedrich <jochen@scram.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-
-#include "mc44s803.h"
-#include "mc44s803_priv.h"
-
-#define mc_printk(level, format, arg...) \
- printk(level "mc44s803: " format , ## arg)
-
-/* Writes a single register */
-static int mc44s803_writereg(struct mc44s803_priv *priv, u32 val)
-{
- u8 buf[3];
- struct i2c_msg msg = {
- .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 3
- };
-
- buf[0] = (val & 0xff0000) >> 16;
- buf[1] = (val & 0xff00) >> 8;
- buf[2] = (val & 0xff);
-
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- mc_printk(KERN_WARNING, "I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-/* Reads a single register */
-static int mc44s803_readreg(struct mc44s803_priv *priv, u8 reg, u32 *val)
-{
- u32 wval;
- u8 buf[3];
- int ret;
- struct i2c_msg msg[] = {
- { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,
- .buf = buf, .len = 3 },
- };
-
- wval = MC44S803_REG_SM(MC44S803_REG_DATAREG, MC44S803_ADDR) |
- MC44S803_REG_SM(reg, MC44S803_D);
-
- ret = mc44s803_writereg(priv, wval);
- if (ret)
- return ret;
-
- if (i2c_transfer(priv->i2c, msg, 1) != 1) {
- mc_printk(KERN_WARNING, "I2C read failed\n");
- return -EREMOTEIO;
- }
-
- *val = (buf[0] << 16) | (buf[1] << 8) | buf[2];
-
- return 0;
-}
-
-static int mc44s803_release(struct dvb_frontend *fe)
-{
- struct mc44s803_priv *priv = fe->tuner_priv;
-
- fe->tuner_priv = NULL;
- kfree(priv);
-
- return 0;
-}
-
-static int mc44s803_init(struct dvb_frontend *fe)
-{
- struct mc44s803_priv *priv = fe->tuner_priv;
- u32 val;
- int err;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
-/* Reset chip */
- val = MC44S803_REG_SM(MC44S803_REG_RESET, MC44S803_ADDR) |
- MC44S803_REG_SM(1, MC44S803_RS);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- val = MC44S803_REG_SM(MC44S803_REG_RESET, MC44S803_ADDR);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
-/* Power Up and Start Osc */
-
- val = MC44S803_REG_SM(MC44S803_REG_REFOSC, MC44S803_ADDR) |
- MC44S803_REG_SM(0xC0, MC44S803_REFOSC) |
- MC44S803_REG_SM(1, MC44S803_OSCSEL);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- val = MC44S803_REG_SM(MC44S803_REG_POWER, MC44S803_ADDR) |
- MC44S803_REG_SM(0x200, MC44S803_POWER);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- msleep(10);
-
- val = MC44S803_REG_SM(MC44S803_REG_REFOSC, MC44S803_ADDR) |
- MC44S803_REG_SM(0x40, MC44S803_REFOSC) |
- MC44S803_REG_SM(1, MC44S803_OSCSEL);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- msleep(20);
-
-/* Setup Mixer */
-
- val = MC44S803_REG_SM(MC44S803_REG_MIXER, MC44S803_ADDR) |
- MC44S803_REG_SM(1, MC44S803_TRI_STATE) |
- MC44S803_REG_SM(0x7F, MC44S803_MIXER_RES);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
-/* Setup Cirquit Adjust */
-
- val = MC44S803_REG_SM(MC44S803_REG_CIRCADJ, MC44S803_ADDR) |
- MC44S803_REG_SM(1, MC44S803_G1) |
- MC44S803_REG_SM(1, MC44S803_G3) |
- MC44S803_REG_SM(0x3, MC44S803_CIRCADJ_RES) |
- MC44S803_REG_SM(1, MC44S803_G6) |
- MC44S803_REG_SM(priv->cfg->dig_out, MC44S803_S1) |
- MC44S803_REG_SM(0x3, MC44S803_LP) |
- MC44S803_REG_SM(1, MC44S803_CLRF) |
- MC44S803_REG_SM(1, MC44S803_CLIF);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- val = MC44S803_REG_SM(MC44S803_REG_CIRCADJ, MC44S803_ADDR) |
- MC44S803_REG_SM(1, MC44S803_G1) |
- MC44S803_REG_SM(1, MC44S803_G3) |
- MC44S803_REG_SM(0x3, MC44S803_CIRCADJ_RES) |
- MC44S803_REG_SM(1, MC44S803_G6) |
- MC44S803_REG_SM(priv->cfg->dig_out, MC44S803_S1) |
- MC44S803_REG_SM(0x3, MC44S803_LP);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
-/* Setup Digtune */
-
- val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) |
- MC44S803_REG_SM(3, MC44S803_XOD);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
-/* Setup AGC */
-
- val = MC44S803_REG_SM(MC44S803_REG_LNAAGC, MC44S803_ADDR) |
- MC44S803_REG_SM(1, MC44S803_AT1) |
- MC44S803_REG_SM(1, MC44S803_AT2) |
- MC44S803_REG_SM(1, MC44S803_AGC_AN_DIG) |
- MC44S803_REG_SM(1, MC44S803_AGC_READ_EN) |
- MC44S803_REG_SM(1, MC44S803_LNA0);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
- return 0;
-
-exit:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- mc_printk(KERN_WARNING, "I/O Error\n");
- return err;
-}
-
-static int mc44s803_set_params(struct dvb_frontend *fe)
-{
- struct mc44s803_priv *priv = fe->tuner_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 r1, r2, n1, n2, lo1, lo2, freq, val;
- int err;
-
- priv->frequency = c->frequency;
-
- r1 = MC44S803_OSC / 1000000;
- r2 = MC44S803_OSC / 100000;
-
- n1 = (c->frequency + MC44S803_IF1 + 500000) / 1000000;
- freq = MC44S803_OSC / r1 * n1;
- lo1 = ((60 * n1) + (r1 / 2)) / r1;
- freq = freq - c->frequency;
-
- n2 = (freq - MC44S803_IF2 + 50000) / 100000;
- lo2 = ((60 * n2) + (r2 / 2)) / r2;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- val = MC44S803_REG_SM(MC44S803_REG_REFDIV, MC44S803_ADDR) |
- MC44S803_REG_SM(r1-1, MC44S803_R1) |
- MC44S803_REG_SM(r2-1, MC44S803_R2) |
- MC44S803_REG_SM(1, MC44S803_REFBUF_EN);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- val = MC44S803_REG_SM(MC44S803_REG_LO1, MC44S803_ADDR) |
- MC44S803_REG_SM(n1-2, MC44S803_LO1);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- val = MC44S803_REG_SM(MC44S803_REG_LO2, MC44S803_ADDR) |
- MC44S803_REG_SM(n2-2, MC44S803_LO2);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) |
- MC44S803_REG_SM(1, MC44S803_DA) |
- MC44S803_REG_SM(lo1, MC44S803_LO_REF) |
- MC44S803_REG_SM(1, MC44S803_AT);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- val = MC44S803_REG_SM(MC44S803_REG_DIGTUNE, MC44S803_ADDR) |
- MC44S803_REG_SM(2, MC44S803_DA) |
- MC44S803_REG_SM(lo2, MC44S803_LO_REF) |
- MC44S803_REG_SM(1, MC44S803_AT);
-
- err = mc44s803_writereg(priv, val);
- if (err)
- goto exit;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return 0;
-
-exit:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- mc_printk(KERN_WARNING, "I/O Error\n");
- return err;
-}
-
-static int mc44s803_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct mc44s803_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static const struct dvb_tuner_ops mc44s803_tuner_ops = {
- .info = {
- .name = "Freescale MC44S803",
- .frequency_min = 48000000,
- .frequency_max = 1000000000,
- .frequency_step = 100000,
- },
-
- .release = mc44s803_release,
- .init = mc44s803_init,
- .set_params = mc44s803_set_params,
- .get_frequency = mc44s803_get_frequency
-};
-
-/* This functions tries to identify a MC44S803 tuner by reading the ID
- register. This is hasty. */
-struct dvb_frontend *mc44s803_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct mc44s803_config *cfg)
-{
- struct mc44s803_priv *priv;
- u32 reg;
- u8 id;
- int ret;
-
- reg = 0;
-
- priv = kzalloc(sizeof(struct mc44s803_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->cfg = cfg;
- priv->i2c = i2c;
- priv->fe = fe;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
- ret = mc44s803_readreg(priv, MC44S803_REG_ID, ®);
- if (ret)
- goto error;
-
- id = MC44S803_REG_MS(reg, MC44S803_ID);
-
- if (id != 0x14) {
- mc_printk(KERN_ERR, "unsupported ID "
- "(%x should be 0x14)\n", id);
- goto error;
- }
-
- mc_printk(KERN_INFO, "successfully identified (ID = %x)\n", id);
- memcpy(&fe->ops.tuner_ops, &mc44s803_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- fe->tuner_priv = priv;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
- return fe;
-
-error:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
- kfree(priv);
- return NULL;
-}
-EXPORT_SYMBOL(mc44s803_attach);
-
-MODULE_AUTHOR("Jochen Friedrich");
-MODULE_DESCRIPTION("Freescale MC44S803 silicon tuner driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/mc44s803.h b/drivers/media/common/tuners/mc44s803.h
deleted file mode 100644
index 34f3892..0000000
--- a/drivers/media/common/tuners/mc44s803.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Driver for Freescale MC44S803 Low Power CMOS Broadband Tuner
- *
- * Copyright (c) 2009 Jochen Friedrich <jochen@scram.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef MC44S803_H
-#define MC44S803_H
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-struct mc44s803_config {
- u8 i2c_address;
- u8 dig_out;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_MC44S803) || \
- (defined(CONFIG_MEDIA_TUNER_MC44S803_MODULE) && defined(MODULE))
-extern struct dvb_frontend *mc44s803_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct mc44s803_config *cfg);
-#else
-static inline struct dvb_frontend *mc44s803_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct mc44s803_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif /* CONFIG_MEDIA_TUNER_MC44S803 */
-
-#endif
diff --git a/drivers/media/common/tuners/mc44s803_priv.h b/drivers/media/common/tuners/mc44s803_priv.h
deleted file mode 100644
index 14a9278..0000000
--- a/drivers/media/common/tuners/mc44s803_priv.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Driver for Freescale MC44S803 Low Power CMOS Broadband Tuner
- *
- * Copyright (c) 2009 Jochen Friedrich <jochen@scram.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef MC44S803_PRIV_H
-#define MC44S803_PRIV_H
-
-/* This driver is based on the information available in the datasheet
- http://www.freescale.com/files/rf_if/doc/data_sheet/MC44S803.pdf
-
- SPI or I2C Address : 0xc0-0xc6
-
- Reg.No | Function
- -------------------------------------------
- 00 | Power Down
- 01 | Reference Oszillator
- 02 | Reference Dividers
- 03 | Mixer and Reference Buffer
- 04 | Reset/Serial Out
- 05 | LO 1
- 06 | LO 2
- 07 | Circuit Adjust
- 08 | Test
- 09 | Digital Tune
- 0A | LNA AGC
- 0B | Data Register Address
- 0C | Regulator Test
- 0D | VCO Test
- 0E | LNA Gain/Input Power
- 0F | ID Bits
-
-*/
-
-#define MC44S803_OSC 26000000 /* 26 MHz */
-#define MC44S803_IF1 1086000000 /* 1086 MHz */
-#define MC44S803_IF2 36125000 /* 36.125 MHz */
-
-#define MC44S803_REG_POWER 0
-#define MC44S803_REG_REFOSC 1
-#define MC44S803_REG_REFDIV 2
-#define MC44S803_REG_MIXER 3
-#define MC44S803_REG_RESET 4
-#define MC44S803_REG_LO1 5
-#define MC44S803_REG_LO2 6
-#define MC44S803_REG_CIRCADJ 7
-#define MC44S803_REG_TEST 8
-#define MC44S803_REG_DIGTUNE 9
-#define MC44S803_REG_LNAAGC 0x0A
-#define MC44S803_REG_DATAREG 0x0B
-#define MC44S803_REG_REGTEST 0x0C
-#define MC44S803_REG_VCOTEST 0x0D
-#define MC44S803_REG_LNAGAIN 0x0E
-#define MC44S803_REG_ID 0x0F
-
-/* Register definitions */
-#define MC44S803_ADDR 0x0F
-#define MC44S803_ADDR_S 0
-/* REG_POWER */
-#define MC44S803_POWER 0xFFFFF0
-#define MC44S803_POWER_S 4
-/* REG_REFOSC */
-#define MC44S803_REFOSC 0x1FF0
-#define MC44S803_REFOSC_S 4
-#define MC44S803_OSCSEL 0x2000
-#define MC44S803_OSCSEL_S 13
-/* REG_REFDIV */
-#define MC44S803_R2 0x1FF0
-#define MC44S803_R2_S 4
-#define MC44S803_REFBUF_EN 0x2000
-#define MC44S803_REFBUF_EN_S 13
-#define MC44S803_R1 0x7C000
-#define MC44S803_R1_S 14
-/* REG_MIXER */
-#define MC44S803_R3 0x70
-#define MC44S803_R3_S 4
-#define MC44S803_MUX3 0x80
-#define MC44S803_MUX3_S 7
-#define MC44S803_MUX4 0x100
-#define MC44S803_MUX4_S 8
-#define MC44S803_OSC_SCR 0x200
-#define MC44S803_OSC_SCR_S 9
-#define MC44S803_TRI_STATE 0x400
-#define MC44S803_TRI_STATE_S 10
-#define MC44S803_BUF_GAIN 0x800
-#define MC44S803_BUF_GAIN_S 11
-#define MC44S803_BUF_IO 0x1000
-#define MC44S803_BUF_IO_S 12
-#define MC44S803_MIXER_RES 0xFE000
-#define MC44S803_MIXER_RES_S 13
-/* REG_RESET */
-#define MC44S803_RS 0x10
-#define MC44S803_RS_S 4
-#define MC44S803_SO 0x20
-#define MC44S803_SO_S 5
-/* REG_LO1 */
-#define MC44S803_LO1 0xFFF0
-#define MC44S803_LO1_S 4
-/* REG_LO2 */
-#define MC44S803_LO2 0x7FFF0
-#define MC44S803_LO2_S 4
-/* REG_CIRCADJ */
-#define MC44S803_G1 0x20
-#define MC44S803_G1_S 5
-#define MC44S803_G3 0x80
-#define MC44S803_G3_S 7
-#define MC44S803_CIRCADJ_RES 0x300
-#define MC44S803_CIRCADJ_RES_S 8
-#define MC44S803_G6 0x400
-#define MC44S803_G6_S 10
-#define MC44S803_G7 0x800
-#define MC44S803_G7_S 11
-#define MC44S803_S1 0x1000
-#define MC44S803_S1_S 12
-#define MC44S803_LP 0x7E000
-#define MC44S803_LP_S 13
-#define MC44S803_CLRF 0x80000
-#define MC44S803_CLRF_S 19
-#define MC44S803_CLIF 0x100000
-#define MC44S803_CLIF_S 20
-/* REG_TEST */
-/* REG_DIGTUNE */
-#define MC44S803_DA 0xF0
-#define MC44S803_DA_S 4
-#define MC44S803_XOD 0x300
-#define MC44S803_XOD_S 8
-#define MC44S803_RST 0x10000
-#define MC44S803_RST_S 16
-#define MC44S803_LO_REF 0x1FFF00
-#define MC44S803_LO_REF_S 8
-#define MC44S803_AT 0x200000
-#define MC44S803_AT_S 21
-#define MC44S803_MT 0x400000
-#define MC44S803_MT_S 22
-/* REG_LNAAGC */
-#define MC44S803_G 0x3F0
-#define MC44S803_G_S 4
-#define MC44S803_AT1 0x400
-#define MC44S803_AT1_S 10
-#define MC44S803_AT2 0x800
-#define MC44S803_AT2_S 11
-#define MC44S803_HL_GR_EN 0x8000
-#define MC44S803_HL_GR_EN_S 15
-#define MC44S803_AGC_AN_DIG 0x10000
-#define MC44S803_AGC_AN_DIG_S 16
-#define MC44S803_ATTEN_EN 0x20000
-#define MC44S803_ATTEN_EN_S 17
-#define MC44S803_AGC_READ_EN 0x40000
-#define MC44S803_AGC_READ_EN_S 18
-#define MC44S803_LNA0 0x80000
-#define MC44S803_LNA0_S 19
-#define MC44S803_AGC_SEL 0x100000
-#define MC44S803_AGC_SEL_S 20
-#define MC44S803_AT0 0x200000
-#define MC44S803_AT0_S 21
-#define MC44S803_B 0xC00000
-#define MC44S803_B_S 22
-/* REG_DATAREG */
-#define MC44S803_D 0xF0
-#define MC44S803_D_S 4
-/* REG_REGTEST */
-/* REG_VCOTEST */
-/* REG_LNAGAIN */
-#define MC44S803_IF_PWR 0x700
-#define MC44S803_IF_PWR_S 8
-#define MC44S803_RF_PWR 0x3800
-#define MC44S803_RF_PWR_S 11
-#define MC44S803_LNA_GAIN 0xFC000
-#define MC44S803_LNA_GAIN_S 14
-/* REG_ID */
-#define MC44S803_ID 0x3E00
-#define MC44S803_ID_S 9
-
-/* Some macros to read/write fields */
-
-/* First shift, then mask */
-#define MC44S803_REG_SM(_val, _reg) \
- (((_val) << _reg##_S) & (_reg))
-
-/* First mask, then shift */
-#define MC44S803_REG_MS(_val, _reg) \
- (((_val) & (_reg)) >> _reg##_S)
-
-struct mc44s803_priv {
- struct mc44s803_config *cfg;
- struct i2c_adapter *i2c;
- struct dvb_frontend *fe;
-
- u32 frequency;
-};
-
-#endif
diff --git a/drivers/media/common/tuners/mt2060.c b/drivers/media/common/tuners/mt2060.c
deleted file mode 100644
index 13381de..0000000
--- a/drivers/media/common/tuners/mt2060.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner"
- *
- * Copyright (c) 2006 Olivier DANET <odanet@caramail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-/* In that file, frequencies are expressed in kiloHertz to avoid 32 bits overflows */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-
-#include "mt2060.h"
-#include "mt2060_priv.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2060: " args); printk("\n"); }} while (0)
-
-// Reads a single register
-static int mt2060_readreg(struct mt2060_priv *priv, u8 reg, u8 *val)
-{
- struct i2c_msg msg[2] = {
- { .addr = priv->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 },
- { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 },
- };
-
- if (i2c_transfer(priv->i2c, msg, 2) != 2) {
- printk(KERN_WARNING "mt2060 I2C read failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-// Writes a single register
-static int mt2060_writereg(struct mt2060_priv *priv, u8 reg, u8 val)
-{
- u8 buf[2] = { reg, val };
- struct i2c_msg msg = {
- .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
- };
-
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "mt2060 I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-// Writes a set of consecutive registers
-static int mt2060_writeregs(struct mt2060_priv *priv,u8 *buf, u8 len)
-{
- struct i2c_msg msg = {
- .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = len
- };
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n",(int)len);
- return -EREMOTEIO;
- }
- return 0;
-}
-
-// Initialisation sequences
-// LNABAND=3, NUM1=0x3C, DIV1=0x74, NUM2=0x1080, DIV2=0x49
-static u8 mt2060_config1[] = {
- REG_LO1C1,
- 0x3F, 0x74, 0x00, 0x08, 0x93
-};
-
-// FMCG=2, GP2=0, GP1=0
-static u8 mt2060_config2[] = {
- REG_MISC_CTRL,
- 0x20, 0x1E, 0x30, 0xff, 0x80, 0xff, 0x00, 0x2c, 0x42
-};
-
-// VGAG=3, V1CSE=1
-
-#ifdef MT2060_SPURCHECK
-/* The function below calculates the frequency offset between the output frequency if2
- and the closer cross modulation subcarrier between lo1 and lo2 up to the tenth harmonic */
-static int mt2060_spurcalc(u32 lo1,u32 lo2,u32 if2)
-{
- int I,J;
- int dia,diamin,diff;
- diamin=1000000;
- for (I = 1; I < 10; I++) {
- J = ((2*I*lo1)/lo2+1)/2;
- diff = I*(int)lo1-J*(int)lo2;
- if (diff < 0) diff=-diff;
- dia = (diff-(int)if2);
- if (dia < 0) dia=-dia;
- if (diamin > dia) diamin=dia;
- }
- return diamin;
-}
-
-#define BANDWIDTH 4000 // kHz
-
-/* Calculates the frequency offset to add to avoid spurs. Returns 0 if no offset is needed */
-static int mt2060_spurcheck(u32 lo1,u32 lo2,u32 if2)
-{
- u32 Spur,Sp1,Sp2;
- int I,J;
- I=0;
- J=1000;
-
- Spur=mt2060_spurcalc(lo1,lo2,if2);
- if (Spur < BANDWIDTH) {
- /* Potential spurs detected */
- dprintk("Spurs before : f_lo1: %d f_lo2: %d (kHz)",
- (int)lo1,(int)lo2);
- I=1000;
- Sp1 = mt2060_spurcalc(lo1+I,lo2+I,if2);
- Sp2 = mt2060_spurcalc(lo1-I,lo2-I,if2);
-
- if (Sp1 < Sp2) {
- J=-J; I=-I; Spur=Sp2;
- } else
- Spur=Sp1;
-
- while (Spur < BANDWIDTH) {
- I += J;
- Spur = mt2060_spurcalc(lo1+I,lo2+I,if2);
- }
- dprintk("Spurs after : f_lo1: %d f_lo2: %d (kHz)",
- (int)(lo1+I),(int)(lo2+I));
- }
- return I;
-}
-#endif
-
-#define IF2 36150 // IF2 frequency = 36.150 MHz
-#define FREF 16000 // Quartz oscillator 16 MHz
-
-static int mt2060_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- struct mt2060_priv *priv;
- int ret=0;
- int i=0;
- u32 freq;
- u8 lnaband;
- u32 f_lo1,f_lo2;
- u32 div1,num1,div2,num2;
- u8 b[8];
- u32 if1;
-
- priv = fe->tuner_priv;
-
- if1 = priv->if1_freq;
- b[0] = REG_LO1B1;
- b[1] = 0xFF;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
- mt2060_writeregs(priv,b,2);
-
- freq = c->frequency / 1000; /* Hz -> kHz */
-
- f_lo1 = freq + if1 * 1000;
- f_lo1 = (f_lo1 / 250) * 250;
- f_lo2 = f_lo1 - freq - IF2;
- // From the Comtech datasheet, the step used is 50kHz. The tuner chip could be more precise
- f_lo2 = ((f_lo2 + 25) / 50) * 50;
- priv->frequency = (f_lo1 - f_lo2 - IF2) * 1000,
-
-#ifdef MT2060_SPURCHECK
- // LO-related spurs detection and correction
- num1 = mt2060_spurcheck(f_lo1,f_lo2,IF2);
- f_lo1 += num1;
- f_lo2 += num1;
-#endif
- //Frequency LO1 = 16MHz * (DIV1 + NUM1/64 )
- num1 = f_lo1 / (FREF / 64);
- div1 = num1 / 64;
- num1 &= 0x3f;
-
- // Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 )
- num2 = f_lo2 * 64 / (FREF / 128);
- div2 = num2 / 8192;
- num2 &= 0x1fff;
-
- if (freq <= 95000) lnaband = 0xB0; else
- if (freq <= 180000) lnaband = 0xA0; else
- if (freq <= 260000) lnaband = 0x90; else
- if (freq <= 335000) lnaband = 0x80; else
- if (freq <= 425000) lnaband = 0x70; else
- if (freq <= 480000) lnaband = 0x60; else
- if (freq <= 570000) lnaband = 0x50; else
- if (freq <= 645000) lnaband = 0x40; else
- if (freq <= 730000) lnaband = 0x30; else
- if (freq <= 810000) lnaband = 0x20; else lnaband = 0x10;
-
- b[0] = REG_LO1C1;
- b[1] = lnaband | ((num1 >>2) & 0x0F);
- b[2] = div1;
- b[3] = (num2 & 0x0F) | ((num1 & 3) << 4);
- b[4] = num2 >> 4;
- b[5] = ((num2 >>12) & 1) | (div2 << 1);
-
- dprintk("IF1: %dMHz",(int)if1);
- dprintk("PLL freq=%dkHz f_lo1=%dkHz f_lo2=%dkHz",(int)freq,(int)f_lo1,(int)f_lo2);
- dprintk("PLL div1=%d num1=%d div2=%d num2=%d",(int)div1,(int)num1,(int)div2,(int)num2);
- dprintk("PLL [1..5]: %2x %2x %2x %2x %2x",(int)b[1],(int)b[2],(int)b[3],(int)b[4],(int)b[5]);
-
- mt2060_writeregs(priv,b,6);
-
- //Waits for pll lock or timeout
- i = 0;
- do {
- mt2060_readreg(priv,REG_LO_STATUS,b);
- if ((b[0] & 0x88)==0x88)
- break;
- msleep(4);
- i++;
- } while (i<10);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
- return ret;
-}
-
-static void mt2060_calibrate(struct mt2060_priv *priv)
-{
- u8 b = 0;
- int i = 0;
-
- if (mt2060_writeregs(priv,mt2060_config1,sizeof(mt2060_config1)))
- return;
- if (mt2060_writeregs(priv,mt2060_config2,sizeof(mt2060_config2)))
- return;
-
- /* initialize the clock output */
- mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30);
-
- do {
- b |= (1 << 6); // FM1SS;
- mt2060_writereg(priv, REG_LO2C1,b);
- msleep(20);
-
- if (i == 0) {
- b |= (1 << 7); // FM1CA;
- mt2060_writereg(priv, REG_LO2C1,b);
- b &= ~(1 << 7); // FM1CA;
- msleep(20);
- }
-
- b &= ~(1 << 6); // FM1SS
- mt2060_writereg(priv, REG_LO2C1,b);
-
- msleep(20);
- i++;
- } while (i < 9);
-
- i = 0;
- while (i++ < 10 && mt2060_readreg(priv, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0)
- msleep(20);
-
- if (i <= 10) {
- mt2060_readreg(priv, REG_FM_FREQ, &priv->fmfreq); // now find out, what is fmreq used for :)
- dprintk("calibration was successful: %d", (int)priv->fmfreq);
- } else
- dprintk("FMCAL timed out");
-}
-
-static int mt2060_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct mt2060_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static int mt2060_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- *frequency = IF2 * 1000;
- return 0;
-}
-
-static int mt2060_init(struct dvb_frontend *fe)
-{
- struct mt2060_priv *priv = fe->tuner_priv;
- int ret;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
- ret = mt2060_writereg(priv, REG_VGAG,
- (priv->cfg->clock_out << 6) | 0x33);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
- return ret;
-}
-
-static int mt2060_sleep(struct dvb_frontend *fe)
-{
- struct mt2060_priv *priv = fe->tuner_priv;
- int ret;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
- ret = mt2060_writereg(priv, REG_VGAG,
- (priv->cfg->clock_out << 6) | 0x30);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
- return ret;
-}
-
-static int mt2060_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static const struct dvb_tuner_ops mt2060_tuner_ops = {
- .info = {
- .name = "Microtune MT2060",
- .frequency_min = 48000000,
- .frequency_max = 860000000,
- .frequency_step = 50000,
- },
-
- .release = mt2060_release,
-
- .init = mt2060_init,
- .sleep = mt2060_sleep,
-
- .set_params = mt2060_set_params,
- .get_frequency = mt2060_get_frequency,
- .get_if_frequency = mt2060_get_if_frequency,
-};
-
-/* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */
-struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
-{
- struct mt2060_priv *priv = NULL;
- u8 id = 0;
-
- priv = kzalloc(sizeof(struct mt2060_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->cfg = cfg;
- priv->i2c = i2c;
- priv->if1_freq = if1;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
- if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) {
- kfree(priv);
- return NULL;
- }
-
- if (id != PART_REV) {
- kfree(priv);
- return NULL;
- }
- printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1);
- memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops));
-
- fe->tuner_priv = priv;
-
- mt2060_calibrate(priv);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
- return fe;
-}
-EXPORT_SYMBOL(mt2060_attach);
-
-MODULE_AUTHOR("Olivier DANET");
-MODULE_DESCRIPTION("Microtune MT2060 silicon tuner driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/mt2060.h b/drivers/media/common/tuners/mt2060.h
deleted file mode 100644
index cb60caf..0000000
--- a/drivers/media/common/tuners/mt2060.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner"
- *
- * Copyright (c) 2006 Olivier DANET <odanet@caramail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef MT2060_H
-#define MT2060_H
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-struct mt2060_config {
- u8 i2c_address;
- u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */
-};
-
-#if defined(CONFIG_MEDIA_TUNER_MT2060) || (defined(CONFIG_MEDIA_TUNER_MT2060_MODULE) && defined(MODULE))
-extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
-#else
-static inline struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif // CONFIG_MEDIA_TUNER_MT2060
-
-#endif
diff --git a/drivers/media/common/tuners/mt2060_priv.h b/drivers/media/common/tuners/mt2060_priv.h
deleted file mode 100644
index 2b60de6..0000000
--- a/drivers/media/common/tuners/mt2060_priv.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner"
- *
- * Copyright (c) 2006 Olivier DANET <odanet@caramail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef MT2060_PRIV_H
-#define MT2060_PRIV_H
-
-// Uncomment the #define below to enable spurs checking. The results where quite unconvincing.
-// #define MT2060_SPURCHECK
-
-/* This driver is based on the information available in the datasheet of the
- "Comtech SDVBT-3K6M" tuner ( K1000737843.pdf ) which features the MT2060 register map :
-
- I2C Address : 0x60
-
- Reg.No | B7 | B6 | B5 | B4 | B3 | B2 | B1 | B0 | ( defaults )
- --------------------------------------------------------------------------------
- 00 | [ PART ] | [ REV ] | R = 0x63
- 01 | [ LNABAND ] | [ NUM1(5:2) ] | RW = 0x3F
- 02 | [ DIV1 ] | RW = 0x74
- 03 | FM1CA | FM1SS | [ NUM1(1:0) ] | [ NUM2(3:0) ] | RW = 0x00
- 04 | NUM2(11:4) ] | RW = 0x08
- 05 | [ DIV2 ] |NUM2(12)| RW = 0x93
- 06 | L1LK | [ TAD1 ] | L2LK | [ TAD2 ] | R
- 07 | [ FMF ] | R
- 08 | ? | FMCAL | ? | ? | ? | ? | ? | TEMP | R
- 09 | 0 | 0 | [ FMGC ] | 0 | GP02 | GP01 | 0 | RW = 0x20
- 0A | ??
- 0B | 0 | 0 | 1 | 1 | 0 | 0 | [ VGAG ] | RW = 0x30
- 0C | V1CSE | 1 | 1 | 1 | 1 | 1 | 1 | 1 | RW = 0xFF
- 0D | 1 | 0 | [ V1CS ] | RW = 0xB0
- 0E | ??
- 0F | ??
- 10 | ??
- 11 | [ LOTO ] | 0 | 0 | 1 | 0 | RW = 0x42
-
- PART : Part code : 6 for MT2060
- REV : Revision code : 3 for current revision
- LNABAND : Input frequency range : ( See code for details )
- NUM1 / DIV1 / NUM2 / DIV2 : Frequencies programming ( See code for details )
- FM1CA : Calibration Start Bit
- FM1SS : Calibration Single Step bit
- L1LK : LO1 Lock Detect
- TAD1 : Tune Line ADC ( ? )
- L2LK : LO2 Lock Detect
- TAD2 : Tune Line ADC ( ? )
- FMF : Estimated first IF Center frequency Offset ( ? )
- FM1CAL : Calibration done bit
- TEMP : On chip temperature sensor
- FMCG : Mixer 1 Cap Gain ( ? )
- GP01 / GP02 : Programmable digital outputs. Unconnected pins ?
- V1CSE : LO1 VCO Automatic Capacitor Select Enable ( ? )
- V1CS : LO1 Capacitor Selection Value ( ? )
- LOTO : LO Timeout ( ? )
- VGAG : Tuner Output gain
-*/
-
-#define I2C_ADDRESS 0x60
-
-#define REG_PART_REV 0
-#define REG_LO1C1 1
-#define REG_LO1C2 2
-#define REG_LO2C1 3
-#define REG_LO2C2 4
-#define REG_LO2C3 5
-#define REG_LO_STATUS 6
-#define REG_FM_FREQ 7
-#define REG_MISC_STAT 8
-#define REG_MISC_CTRL 9
-#define REG_RESERVED_A 0x0A
-#define REG_VGAG 0x0B
-#define REG_LO1B1 0x0C
-#define REG_LO1B2 0x0D
-#define REG_LOTO 0x11
-
-#define PART_REV 0x63 // The current driver works only with PART=6 and REV=3 chips
-
-struct mt2060_priv {
- struct mt2060_config *cfg;
- struct i2c_adapter *i2c;
-
- u32 frequency;
- u16 if1_freq;
- u8 fmfreq;
-};
-
-#endif
diff --git a/drivers/media/common/tuners/mt2063.c b/drivers/media/common/tuners/mt2063.c
deleted file mode 100644
index 0ed9091..0000000
--- a/drivers/media/common/tuners/mt2063.c
+++ /dev/null
@@ -1,2307 +0,0 @@
-/*
- * Driver for mt2063 Micronas tuner
- *
- * Copyright (c) 2011 Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This driver came from a driver originally written by:
- * Henry Wang <Henry.wang@AzureWave.com>
- * Made publicly available by Terratec, at:
- * http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz
- * The original driver's license is GPL, as declared with MODULE_LICENSE()
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation under version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/videodev2.h>
-
-#include "mt2063.h"
-
-static unsigned int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Set Verbosity level");
-
-#define dprintk(level, fmt, arg...) do { \
-if (debug >= level) \
- printk(KERN_DEBUG "mt2063 %s: " fmt, __func__, ## arg); \
-} while (0)
-
-
-/* positive error codes used internally */
-
-/* Info: Unavoidable LO-related spur may be present in the output */
-#define MT2063_SPUR_PRESENT_ERR (0x00800000)
-
-/* Info: Mask of bits used for # of LO-related spurs that were avoided during tuning */
-#define MT2063_SPUR_CNT_MASK (0x001f0000)
-#define MT2063_SPUR_SHIFT (16)
-
-/* Info: Upconverter frequency is out of range (may be reason for MT_UPC_UNLOCK) */
-#define MT2063_UPC_RANGE (0x04000000)
-
-/* Info: Downconverter frequency is out of range (may be reason for MT_DPC_UNLOCK) */
-#define MT2063_DNC_RANGE (0x08000000)
-
-/*
- * Constant defining the version of the following structure
- * and therefore the API for this code.
- *
- * When compiling the tuner driver, the preprocessor will
- * check against this version number to make sure that
- * it matches the version that the tuner driver knows about.
- */
-
-/* DECT Frequency Avoidance */
-#define MT2063_DECT_AVOID_US_FREQS 0x00000001
-
-#define MT2063_DECT_AVOID_EURO_FREQS 0x00000002
-
-#define MT2063_EXCLUDE_US_DECT_FREQUENCIES(s) (((s) & MT2063_DECT_AVOID_US_FREQS) != 0)
-
-#define MT2063_EXCLUDE_EURO_DECT_FREQUENCIES(s) (((s) & MT2063_DECT_AVOID_EURO_FREQS) != 0)
-
-enum MT2063_DECT_Avoid_Type {
- MT2063_NO_DECT_AVOIDANCE = 0, /* Do not create DECT exclusion zones. */
- MT2063_AVOID_US_DECT = MT2063_DECT_AVOID_US_FREQS, /* Avoid US DECT frequencies. */
- MT2063_AVOID_EURO_DECT = MT2063_DECT_AVOID_EURO_FREQS, /* Avoid European DECT frequencies. */
- MT2063_AVOID_BOTH /* Avoid both regions. Not typically used. */
-};
-
-#define MT2063_MAX_ZONES 48
-
-struct MT2063_ExclZone_t {
- u32 min_;
- u32 max_;
- struct MT2063_ExclZone_t *next_;
-};
-
-/*
- * Structure of data needed for Spur Avoidance
- */
-struct MT2063_AvoidSpursData_t {
- u32 f_ref;
- u32 f_in;
- u32 f_LO1;
- u32 f_if1_Center;
- u32 f_if1_Request;
- u32 f_if1_bw;
- u32 f_LO2;
- u32 f_out;
- u32 f_out_bw;
- u32 f_LO1_Step;
- u32 f_LO2_Step;
- u32 f_LO1_FracN_Avoid;
- u32 f_LO2_FracN_Avoid;
- u32 f_zif_bw;
- u32 f_min_LO_Separation;
- u32 maxH1;
- u32 maxH2;
- enum MT2063_DECT_Avoid_Type avoidDECT;
- u32 bSpurPresent;
- u32 bSpurAvoided;
- u32 nSpursFound;
- u32 nZones;
- struct MT2063_ExclZone_t *freeZones;
- struct MT2063_ExclZone_t *usedZones;
- struct MT2063_ExclZone_t MT2063_ExclZones[MT2063_MAX_ZONES];
-};
-
-/*
- * Parameter for function MT2063_SetPowerMask that specifies the power down
- * of various sections of the MT2063.
- */
-enum MT2063_Mask_Bits {
- MT2063_REG_SD = 0x0040, /* Shutdown regulator */
- MT2063_SRO_SD = 0x0020, /* Shutdown SRO */
- MT2063_AFC_SD = 0x0010, /* Shutdown AFC A/D */
- MT2063_PD_SD = 0x0002, /* Enable power detector shutdown */
- MT2063_PDADC_SD = 0x0001, /* Enable power detector A/D shutdown */
- MT2063_VCO_SD = 0x8000, /* Enable VCO shutdown */
- MT2063_LTX_SD = 0x4000, /* Enable LTX shutdown */
- MT2063_LT1_SD = 0x2000, /* Enable LT1 shutdown */
- MT2063_LNA_SD = 0x1000, /* Enable LNA shutdown */
- MT2063_UPC_SD = 0x0800, /* Enable upconverter shutdown */
- MT2063_DNC_SD = 0x0400, /* Enable downconverter shutdown */
- MT2063_VGA_SD = 0x0200, /* Enable VGA shutdown */
- MT2063_AMP_SD = 0x0100, /* Enable AMP shutdown */
- MT2063_ALL_SD = 0xFF73, /* All shutdown bits for this tuner */
- MT2063_NONE_SD = 0x0000 /* No shutdown bits */
-};
-
-/*
- * Possible values for MT2063_DNC_OUTPUT
- */
-enum MT2063_DNC_Output_Enable {
- MT2063_DNC_NONE = 0,
- MT2063_DNC_1,
- MT2063_DNC_2,
- MT2063_DNC_BOTH
-};
-
-/*
- * Two-wire serial bus subaddresses of the tuner registers.
- * Also known as the tuner's register addresses.
- */
-enum MT2063_Register_Offsets {
- MT2063_REG_PART_REV = 0, /* 0x00: Part/Rev Code */
- MT2063_REG_LO1CQ_1, /* 0x01: LO1C Queued Byte 1 */
- MT2063_REG_LO1CQ_2, /* 0x02: LO1C Queued Byte 2 */
- MT2063_REG_LO2CQ_1, /* 0x03: LO2C Queued Byte 1 */
- MT2063_REG_LO2CQ_2, /* 0x04: LO2C Queued Byte 2 */
- MT2063_REG_LO2CQ_3, /* 0x05: LO2C Queued Byte 3 */
- MT2063_REG_RSVD_06, /* 0x06: Reserved */
- MT2063_REG_LO_STATUS, /* 0x07: LO Status */
- MT2063_REG_FIFFC, /* 0x08: FIFF Center */
- MT2063_REG_CLEARTUNE, /* 0x09: ClearTune Filter */
- MT2063_REG_ADC_OUT, /* 0x0A: ADC_OUT */
- MT2063_REG_LO1C_1, /* 0x0B: LO1C Byte 1 */
- MT2063_REG_LO1C_2, /* 0x0C: LO1C Byte 2 */
- MT2063_REG_LO2C_1, /* 0x0D: LO2C Byte 1 */
- MT2063_REG_LO2C_2, /* 0x0E: LO2C Byte 2 */
- MT2063_REG_LO2C_3, /* 0x0F: LO2C Byte 3 */
- MT2063_REG_RSVD_10, /* 0x10: Reserved */
- MT2063_REG_PWR_1, /* 0x11: PWR Byte 1 */
- MT2063_REG_PWR_2, /* 0x12: PWR Byte 2 */
- MT2063_REG_TEMP_STATUS, /* 0x13: Temp Status */
- MT2063_REG_XO_STATUS, /* 0x14: Crystal Status */
- MT2063_REG_RF_STATUS, /* 0x15: RF Attn Status */
- MT2063_REG_FIF_STATUS, /* 0x16: FIF Attn Status */
- MT2063_REG_LNA_OV, /* 0x17: LNA Attn Override */
- MT2063_REG_RF_OV, /* 0x18: RF Attn Override */
- MT2063_REG_FIF_OV, /* 0x19: FIF Attn Override */
- MT2063_REG_LNA_TGT, /* 0x1A: Reserved */
- MT2063_REG_PD1_TGT, /* 0x1B: Pwr Det 1 Target */
- MT2063_REG_PD2_TGT, /* 0x1C: Pwr Det 2 Target */
- MT2063_REG_RSVD_1D, /* 0x1D: Reserved */
- MT2063_REG_RSVD_1E, /* 0x1E: Reserved */
- MT2063_REG_RSVD_1F, /* 0x1F: Reserved */
- MT2063_REG_RSVD_20, /* 0x20: Reserved */
- MT2063_REG_BYP_CTRL, /* 0x21: Bypass Control */
- MT2063_REG_RSVD_22, /* 0x22: Reserved */
- MT2063_REG_RSVD_23, /* 0x23: Reserved */
- MT2063_REG_RSVD_24, /* 0x24: Reserved */
- MT2063_REG_RSVD_25, /* 0x25: Reserved */
- MT2063_REG_RSVD_26, /* 0x26: Reserved */
- MT2063_REG_RSVD_27, /* 0x27: Reserved */
- MT2063_REG_FIFF_CTRL, /* 0x28: FIFF Control */
- MT2063_REG_FIFF_OFFSET, /* 0x29: FIFF Offset */
- MT2063_REG_CTUNE_CTRL, /* 0x2A: Reserved */
- MT2063_REG_CTUNE_OV, /* 0x2B: Reserved */
- MT2063_REG_CTRL_2C, /* 0x2C: Reserved */
- MT2063_REG_FIFF_CTRL2, /* 0x2D: Fiff Control */
- MT2063_REG_RSVD_2E, /* 0x2E: Reserved */
- MT2063_REG_DNC_GAIN, /* 0x2F: DNC Control */
- MT2063_REG_VGA_GAIN, /* 0x30: VGA Gain Ctrl */
- MT2063_REG_RSVD_31, /* 0x31: Reserved */
- MT2063_REG_TEMP_SEL, /* 0x32: Temperature Selection */
- MT2063_REG_RSVD_33, /* 0x33: Reserved */
- MT2063_REG_RSVD_34, /* 0x34: Reserved */
- MT2063_REG_RSVD_35, /* 0x35: Reserved */
- MT2063_REG_RSVD_36, /* 0x36: Reserved */
- MT2063_REG_RSVD_37, /* 0x37: Reserved */
- MT2063_REG_RSVD_38, /* 0x38: Reserved */
- MT2063_REG_RSVD_39, /* 0x39: Reserved */
- MT2063_REG_RSVD_3A, /* 0x3A: Reserved */
- MT2063_REG_RSVD_3B, /* 0x3B: Reserved */
- MT2063_REG_RSVD_3C, /* 0x3C: Reserved */
- MT2063_REG_END_REGS
-};
-
-struct mt2063_state {
- struct i2c_adapter *i2c;
-
- bool init;
-
- const struct mt2063_config *config;
- struct dvb_tuner_ops ops;
- struct dvb_frontend *frontend;
- struct tuner_state status;
-
- u32 frequency;
- u32 srate;
- u32 bandwidth;
- u32 reference;
-
- u32 tuner_id;
- struct MT2063_AvoidSpursData_t AS_Data;
- u32 f_IF1_actual;
- u32 rcvr_mode;
- u32 ctfilt_sw;
- u32 CTFiltMax[31];
- u32 num_regs;
- u8 reg[MT2063_REG_END_REGS];
-};
-
-/*
- * mt2063_write - Write data into the I2C bus
- */
-static u32 mt2063_write(struct mt2063_state *state, u8 reg, u8 *data, u32 len)
-{
- struct dvb_frontend *fe = state->frontend;
- int ret;
- u8 buf[60];
- struct i2c_msg msg = {
- .addr = state->config->tuner_address,
- .flags = 0,
- .buf = buf,
- .len = len + 1
- };
-
- dprintk(2, "\n");
-
- msg.buf[0] = reg;
- memcpy(msg.buf + 1, data, len);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- ret = i2c_transfer(state->i2c, &msg, 1);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- if (ret < 0)
- printk(KERN_ERR "%s error ret=%d\n", __func__, ret);
-
- return ret;
-}
-
-/*
- * mt2063_write - Write register data into the I2C bus, caching the value
- */
-static u32 mt2063_setreg(struct mt2063_state *state, u8 reg, u8 val)
-{
- u32 status;
-
- dprintk(2, "\n");
-
- if (reg >= MT2063_REG_END_REGS)
- return -ERANGE;
-
- status = mt2063_write(state, reg, &val, 1);
- if (status < 0)
- return status;
-
- state->reg[reg] = val;
-
- return 0;
-}
-
-/*
- * mt2063_read - Read data from the I2C bus
- */
-static u32 mt2063_read(struct mt2063_state *state,
- u8 subAddress, u8 *pData, u32 cnt)
-{
- u32 status = 0; /* Status to be returned */
- struct dvb_frontend *fe = state->frontend;
- u32 i = 0;
-
- dprintk(2, "addr 0x%02x, cnt %d\n", subAddress, cnt);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- for (i = 0; i < cnt; i++) {
- u8 b0[] = { subAddress + i };
- struct i2c_msg msg[] = {
- {
- .addr = state->config->tuner_address,
- .flags = 0,
- .buf = b0,
- .len = 1
- }, {
- .addr = state->config->tuner_address,
- .flags = I2C_M_RD,
- .buf = pData + i,
- .len = 1
- }
- };
-
- status = i2c_transfer(state->i2c, msg, 2);
- dprintk(2, "addr 0x%02x, ret = %d, val = 0x%02x\n",
- subAddress + i, status, *(pData + i));
- if (status < 0)
- break;
- }
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- if (status < 0)
- printk(KERN_ERR "Can't read from address 0x%02x,\n",
- subAddress + i);
-
- return status;
-}
-
-/*
- * FIXME: Is this really needed?
- */
-static int MT2063_Sleep(struct dvb_frontend *fe)
-{
- /*
- * ToDo: Add code here to implement a OS blocking
- */
- msleep(100);
-
- return 0;
-}
-
-/*
- * Microtune spur avoidance
- */
-
-/* Implement ceiling, floor functions. */
-#define ceil(n, d) (((n) < 0) ? (-((-(n))/(d))) : (n)/(d) + ((n)%(d) != 0))
-#define floor(n, d) (((n) < 0) ? (-((-(n))/(d))) - ((n)%(d) != 0) : (n)/(d))
-
-struct MT2063_FIFZone_t {
- s32 min_;
- s32 max_;
-};
-
-static struct MT2063_ExclZone_t *InsertNode(struct MT2063_AvoidSpursData_t
- *pAS_Info,
- struct MT2063_ExclZone_t *pPrevNode)
-{
- struct MT2063_ExclZone_t *pNode;
-
- dprintk(2, "\n");
-
- /* Check for a node in the free list */
- if (pAS_Info->freeZones != NULL) {
- /* Use one from the free list */
- pNode = pAS_Info->freeZones;
- pAS_Info->freeZones = pNode->next_;
- } else {
- /* Grab a node from the array */
- pNode = &pAS_Info->MT2063_ExclZones[pAS_Info->nZones];
- }
-
- if (pPrevNode != NULL) {
- pNode->next_ = pPrevNode->next_;
- pPrevNode->next_ = pNode;
- } else { /* insert at the beginning of the list */
-
- pNode->next_ = pAS_Info->usedZones;
- pAS_Info->usedZones = pNode;
- }
-
- pAS_Info->nZones++;
- return pNode;
-}
-
-static struct MT2063_ExclZone_t *RemoveNode(struct MT2063_AvoidSpursData_t
- *pAS_Info,
- struct MT2063_ExclZone_t *pPrevNode,
- struct MT2063_ExclZone_t
- *pNodeToRemove)
-{
- struct MT2063_ExclZone_t *pNext = pNodeToRemove->next_;
-
- dprintk(2, "\n");
-
- /* Make previous node point to the subsequent node */
- if (pPrevNode != NULL)
- pPrevNode->next_ = pNext;
-
- /* Add pNodeToRemove to the beginning of the freeZones */
- pNodeToRemove->next_ = pAS_Info->freeZones;
- pAS_Info->freeZones = pNodeToRemove;
-
- /* Decrement node count */
- pAS_Info->nZones--;
-
- return pNext;
-}
-
-/*
- * MT_AddExclZone()
- *
- * Add (and merge) an exclusion zone into the list.
- * If the range (f_min, f_max) is totally outside the
- * 1st IF BW, ignore the entry.
- * If the range (f_min, f_max) is negative, ignore the entry.
- */
-static void MT2063_AddExclZone(struct MT2063_AvoidSpursData_t *pAS_Info,
- u32 f_min, u32 f_max)
-{
- struct MT2063_ExclZone_t *pNode = pAS_Info->usedZones;
- struct MT2063_ExclZone_t *pPrev = NULL;
- struct MT2063_ExclZone_t *pNext = NULL;
-
- dprintk(2, "\n");
-
- /* Check to see if this overlaps the 1st IF filter */
- if ((f_max > (pAS_Info->f_if1_Center - (pAS_Info->f_if1_bw / 2)))
- && (f_min < (pAS_Info->f_if1_Center + (pAS_Info->f_if1_bw / 2)))
- && (f_min < f_max)) {
- /*
- * 1 2 3 4 5 6
- *
- * New entry: |---| |--| |--| |-| |---| |--|
- * or or or or or
- * Existing: |--| |--| |--| |---| |-| |--|
- */
-
- /* Check for our place in the list */
- while ((pNode != NULL) && (pNode->max_ < f_min)) {
- pPrev = pNode;
- pNode = pNode->next_;
- }
-
- if ((pNode != NULL) && (pNode->min_ < f_max)) {
- /* Combine me with pNode */
- if (f_min < pNode->min_)
- pNode->min_ = f_min;
- if (f_max > pNode->max_)
- pNode->max_ = f_max;
- } else {
- pNode = InsertNode(pAS_Info, pPrev);
- pNode->min_ = f_min;
- pNode->max_ = f_max;
- }
-
- /* Look for merging possibilities */
- pNext = pNode->next_;
- while ((pNext != NULL) && (pNext->min_ < pNode->max_)) {
- if (pNext->max_ > pNode->max_)
- pNode->max_ = pNext->max_;
- /* Remove pNext, return ptr to pNext->next */
- pNext = RemoveNode(pAS_Info, pNode, pNext);
- }
- }
-}
-
-/*
- * Reset all exclusion zones.
- * Add zones to protect the PLL FracN regions near zero
- */
-static void MT2063_ResetExclZones(struct MT2063_AvoidSpursData_t *pAS_Info)
-{
- u32 center;
-
- dprintk(2, "\n");
-
- pAS_Info->nZones = 0; /* this clears the used list */
- pAS_Info->usedZones = NULL; /* reset ptr */
- pAS_Info->freeZones = NULL; /* reset ptr */
-
- center =
- pAS_Info->f_ref *
- ((pAS_Info->f_if1_Center - pAS_Info->f_if1_bw / 2 +
- pAS_Info->f_in) / pAS_Info->f_ref) - pAS_Info->f_in;
- while (center <
- pAS_Info->f_if1_Center + pAS_Info->f_if1_bw / 2 +
- pAS_Info->f_LO1_FracN_Avoid) {
- /* Exclude LO1 FracN */
- MT2063_AddExclZone(pAS_Info,
- center - pAS_Info->f_LO1_FracN_Avoid,
- center - 1);
- MT2063_AddExclZone(pAS_Info, center + 1,
- center + pAS_Info->f_LO1_FracN_Avoid);
- center += pAS_Info->f_ref;
- }
-
- center =
- pAS_Info->f_ref *
- ((pAS_Info->f_if1_Center - pAS_Info->f_if1_bw / 2 -
- pAS_Info->f_out) / pAS_Info->f_ref) + pAS_Info->f_out;
- while (center <
- pAS_Info->f_if1_Center + pAS_Info->f_if1_bw / 2 +
- pAS_Info->f_LO2_FracN_Avoid) {
- /* Exclude LO2 FracN */
- MT2063_AddExclZone(pAS_Info,
- center - pAS_Info->f_LO2_FracN_Avoid,
- center - 1);
- MT2063_AddExclZone(pAS_Info, center + 1,
- center + pAS_Info->f_LO2_FracN_Avoid);
- center += pAS_Info->f_ref;
- }
-
- if (MT2063_EXCLUDE_US_DECT_FREQUENCIES(pAS_Info->avoidDECT)) {
- /* Exclude LO1 values that conflict with DECT channels */
- MT2063_AddExclZone(pAS_Info, 1920836000 - pAS_Info->f_in, 1922236000 - pAS_Info->f_in); /* Ctr = 1921.536 */
- MT2063_AddExclZone(pAS_Info, 1922564000 - pAS_Info->f_in, 1923964000 - pAS_Info->f_in); /* Ctr = 1923.264 */
- MT2063_AddExclZone(pAS_Info, 1924292000 - pAS_Info->f_in, 1925692000 - pAS_Info->f_in); /* Ctr = 1924.992 */
- MT2063_AddExclZone(pAS_Info, 1926020000 - pAS_Info->f_in, 1927420000 - pAS_Info->f_in); /* Ctr = 1926.720 */
- MT2063_AddExclZone(pAS_Info, 1927748000 - pAS_Info->f_in, 1929148000 - pAS_Info->f_in); /* Ctr = 1928.448 */
- }
-
- if (MT2063_EXCLUDE_EURO_DECT_FREQUENCIES(pAS_Info->avoidDECT)) {
- MT2063_AddExclZone(pAS_Info, 1896644000 - pAS_Info->f_in, 1898044000 - pAS_Info->f_in); /* Ctr = 1897.344 */
- MT2063_AddExclZone(pAS_Info, 1894916000 - pAS_Info->f_in, 1896316000 - pAS_Info->f_in); /* Ctr = 1895.616 */
- MT2063_AddExclZone(pAS_Info, 1893188000 - pAS_Info->f_in, 1894588000 - pAS_Info->f_in); /* Ctr = 1893.888 */
- MT2063_AddExclZone(pAS_Info, 1891460000 - pAS_Info->f_in, 1892860000 - pAS_Info->f_in); /* Ctr = 1892.16 */
- MT2063_AddExclZone(pAS_Info, 1889732000 - pAS_Info->f_in, 1891132000 - pAS_Info->f_in); /* Ctr = 1890.432 */
- MT2063_AddExclZone(pAS_Info, 1888004000 - pAS_Info->f_in, 1889404000 - pAS_Info->f_in); /* Ctr = 1888.704 */
- MT2063_AddExclZone(pAS_Info, 1886276000 - pAS_Info->f_in, 1887676000 - pAS_Info->f_in); /* Ctr = 1886.976 */
- MT2063_AddExclZone(pAS_Info, 1884548000 - pAS_Info->f_in, 1885948000 - pAS_Info->f_in); /* Ctr = 1885.248 */
- MT2063_AddExclZone(pAS_Info, 1882820000 - pAS_Info->f_in, 1884220000 - pAS_Info->f_in); /* Ctr = 1883.52 */
- MT2063_AddExclZone(pAS_Info, 1881092000 - pAS_Info->f_in, 1882492000 - pAS_Info->f_in); /* Ctr = 1881.792 */
- }
-}
-
-/*
- * MT_ChooseFirstIF - Choose the best available 1st IF
- * If f_Desired is not excluded, choose that first.
- * Otherwise, return the value closest to f_Center that is
- * not excluded
- */
-static u32 MT2063_ChooseFirstIF(struct MT2063_AvoidSpursData_t *pAS_Info)
-{
- /*
- * Update "f_Desired" to be the nearest "combinational-multiple" of
- * "f_LO1_Step".
- * The resulting number, F_LO1 must be a multiple of f_LO1_Step.
- * And F_LO1 is the arithmetic sum of f_in + f_Center.
- * Neither f_in, nor f_Center must be a multiple of f_LO1_Step.
- * However, the sum must be.
- */
- const u32 f_Desired =
- pAS_Info->f_LO1_Step *
- ((pAS_Info->f_if1_Request + pAS_Info->f_in +
- pAS_Info->f_LO1_Step / 2) / pAS_Info->f_LO1_Step) -
- pAS_Info->f_in;
- const u32 f_Step =
- (pAS_Info->f_LO1_Step >
- pAS_Info->f_LO2_Step) ? pAS_Info->f_LO1_Step : pAS_Info->
- f_LO2_Step;
- u32 f_Center;
- s32 i;
- s32 j = 0;
- u32 bDesiredExcluded = 0;
- u32 bZeroExcluded = 0;
- s32 tmpMin, tmpMax;
- s32 bestDiff;
- struct MT2063_ExclZone_t *pNode = pAS_Info->usedZones;
- struct MT2063_FIFZone_t zones[MT2063_MAX_ZONES];
-
- dprintk(2, "\n");
-
- if (pAS_Info->nZones == 0)
- return f_Desired;
-
- /*
- * f_Center needs to be an integer multiple of f_Step away
- * from f_Desired
- */
- if (pAS_Info->f_if1_Center > f_Desired)
- f_Center =
- f_Desired +
- f_Step *
- ((pAS_Info->f_if1_Center - f_Desired +
- f_Step / 2) / f_Step);
- else
- f_Center =
- f_Desired -
- f_Step *
- ((f_Desired - pAS_Info->f_if1_Center +
- f_Step / 2) / f_Step);
-
- /*
- * Take MT_ExclZones, center around f_Center and change the
- * resolution to f_Step
- */
- while (pNode != NULL) {
- /* floor function */
- tmpMin =
- floor((s32) (pNode->min_ - f_Center), (s32) f_Step);
-
- /* ceil function */
- tmpMax =
- ceil((s32) (pNode->max_ - f_Center), (s32) f_Step);
-
- if ((pNode->min_ < f_Desired) && (pNode->max_ > f_Desired))
- bDesiredExcluded = 1;
-
- if ((tmpMin < 0) && (tmpMax > 0))
- bZeroExcluded = 1;
-
- /* See if this zone overlaps the previous */
- if ((j > 0) && (tmpMin < zones[j - 1].max_))
- zones[j - 1].max_ = tmpMax;
- else {
- /* Add new zone */
- zones[j].min_ = tmpMin;
- zones[j].max_ = tmpMax;
- j++;
- }
- pNode = pNode->next_;
- }
-
- /*
- * If the desired is okay, return with it
- */
- if (bDesiredExcluded == 0)
- return f_Desired;
-
- /*
- * If the desired is excluded and the center is okay, return with it
- */
- if (bZeroExcluded == 0)
- return f_Center;
-
- /* Find the value closest to 0 (f_Center) */
- bestDiff = zones[0].min_;
- for (i = 0; i < j; i++) {
- if (abs(zones[i].min_) < abs(bestDiff))
- bestDiff = zones[i].min_;
- if (abs(zones[i].max_) < abs(bestDiff))
- bestDiff = zones[i].max_;
- }
-
- if (bestDiff < 0)
- return f_Center - ((u32) (-bestDiff) * f_Step);
-
- return f_Center + (bestDiff * f_Step);
-}
-
-/**
- * gcd() - Uses Euclid's algorithm
- *
- * @u, @v: Unsigned values whose GCD is desired.
- *
- * Returns THE greatest common divisor of u and v, if either value is 0,
- * the other value is returned as the result.
- */
-static u32 MT2063_gcd(u32 u, u32 v)
-{
- u32 r;
-
- while (v != 0) {
- r = u % v;
- u = v;
- v = r;
- }
-
- return u;
-}
-
-/**
- * IsSpurInBand() - Checks to see if a spur will be present within the IF's
- * bandwidth. (fIFOut +/- fIFBW, -fIFOut +/- fIFBW)
- *
- * ma mb mc md
- * <--+-+-+-------------------+-------------------+-+-+-->
- * | ^ 0 ^ |
- * ^ b=-fIFOut+fIFBW/2 -b=+fIFOut-fIFBW/2 ^
- * a=-fIFOut-fIFBW/2 -a=+fIFOut+fIFBW/2
- *
- * Note that some equations are doubled to prevent round-off
- * problems when calculating fIFBW/2
- *
- * @pAS_Info: Avoid Spurs information block
- * @fm: If spur, amount f_IF1 has to move negative
- * @fp: If spur, amount f_IF1 has to move positive
- *
- * Returns 1 if an LO spur would be present, otherwise 0.
- */
-static u32 IsSpurInBand(struct MT2063_AvoidSpursData_t *pAS_Info,
- u32 *fm, u32 * fp)
-{
- /*
- ** Calculate LO frequency settings.
- */
- u32 n, n0;
- const u32 f_LO1 = pAS_Info->f_LO1;
- const u32 f_LO2 = pAS_Info->f_LO2;
- const u32 d = pAS_Info->f_out + pAS_Info->f_out_bw / 2;
- const u32 c = d - pAS_Info->f_out_bw;
- const u32 f = pAS_Info->f_zif_bw / 2;
- const u32 f_Scale = (f_LO1 / (UINT_MAX / 2 / pAS_Info->maxH1)) + 1;
- s32 f_nsLO1, f_nsLO2;
- s32 f_Spur;
- u32 ma, mb, mc, md, me, mf;
- u32 lo_gcd, gd_Scale, gc_Scale, gf_Scale, hgds, hgfs, hgcs;
-
- dprintk(2, "\n");
-
- *fm = 0;
-
- /*
- ** For each edge (d, c & f), calculate a scale, based on the gcd
- ** of f_LO1, f_LO2 and the edge value. Use the larger of this
- ** gcd-based scale factor or f_Scale.
- */
- lo_gcd = MT2063_gcd(f_LO1, f_LO2);
- gd_Scale = max((u32) MT2063_gcd(lo_gcd, d), f_Scale);
- hgds = gd_Scale / 2;
- gc_Scale = max((u32) MT2063_gcd(lo_gcd, c), f_Scale);
- hgcs = gc_Scale / 2;
- gf_Scale = max((u32) MT2063_gcd(lo_gcd, f), f_Scale);
- hgfs = gf_Scale / 2;
-
- n0 = DIV_ROUND_UP(f_LO2 - d, f_LO1 - f_LO2);
-
- /* Check out all multiples of LO1 from n0 to m_maxLOSpurHarmonic */
- for (n = n0; n <= pAS_Info->maxH1; ++n) {
- md = (n * ((f_LO1 + hgds) / gd_Scale) -
- ((d + hgds) / gd_Scale)) / ((f_LO2 + hgds) / gd_Scale);
-
- /* If # fLO2 harmonics > m_maxLOSpurHarmonic, then no spurs present */
- if (md >= pAS_Info->maxH1)
- break;
-
- ma = (n * ((f_LO1 + hgds) / gd_Scale) +
- ((d + hgds) / gd_Scale)) / ((f_LO2 + hgds) / gd_Scale);
-
- /* If no spurs between +/- (f_out + f_IFBW/2), then try next harmonic */
- if (md == ma)
- continue;
-
- mc = (n * ((f_LO1 + hgcs) / gc_Scale) -
- ((c + hgcs) / gc_Scale)) / ((f_LO2 + hgcs) / gc_Scale);
- if (mc != md) {
- f_nsLO1 = (s32) (n * (f_LO1 / gc_Scale));
- f_nsLO2 = (s32) (mc * (f_LO2 / gc_Scale));
- f_Spur =
- (gc_Scale * (f_nsLO1 - f_nsLO2)) +
- n * (f_LO1 % gc_Scale) - mc * (f_LO2 % gc_Scale);
-
- *fp = ((f_Spur - (s32) c) / (mc - n)) + 1;
- *fm = (((s32) d - f_Spur) / (mc - n)) + 1;
- return 1;
- }
-
- /* Location of Zero-IF-spur to be checked */
- me = (n * ((f_LO1 + hgfs) / gf_Scale) +
- ((f + hgfs) / gf_Scale)) / ((f_LO2 + hgfs) / gf_Scale);
- mf = (n * ((f_LO1 + hgfs) / gf_Scale) -
- ((f + hgfs) / gf_Scale)) / ((f_LO2 + hgfs) / gf_Scale);
- if (me != mf) {
- f_nsLO1 = n * (f_LO1 / gf_Scale);
- f_nsLO2 = me * (f_LO2 / gf_Scale);
- f_Spur =
- (gf_Scale * (f_nsLO1 - f_nsLO2)) +
- n * (f_LO1 % gf_Scale) - me * (f_LO2 % gf_Scale);
-
- *fp = ((f_Spur + (s32) f) / (me - n)) + 1;
- *fm = (((s32) f - f_Spur) / (me - n)) + 1;
- return 1;
- }
-
- mb = (n * ((f_LO1 + hgcs) / gc_Scale) +
- ((c + hgcs) / gc_Scale)) / ((f_LO2 + hgcs) / gc_Scale);
- if (ma != mb) {
- f_nsLO1 = n * (f_LO1 / gc_Scale);
- f_nsLO2 = ma * (f_LO2 / gc_Scale);
- f_Spur =
- (gc_Scale * (f_nsLO1 - f_nsLO2)) +
- n * (f_LO1 % gc_Scale) - ma * (f_LO2 % gc_Scale);
-
- *fp = (((s32) d + f_Spur) / (ma - n)) + 1;
- *fm = (-(f_Spur + (s32) c) / (ma - n)) + 1;
- return 1;
- }
- }
-
- /* No spurs found */
- return 0;
-}
-
-/*
- * MT_AvoidSpurs() - Main entry point to avoid spurs.
- * Checks for existing spurs in present LO1, LO2 freqs
- * and if present, chooses spur-free LO1, LO2 combination
- * that tunes the same input/output frequencies.
- */
-static u32 MT2063_AvoidSpurs(struct MT2063_AvoidSpursData_t *pAS_Info)
-{
- u32 status = 0;
- u32 fm, fp; /* restricted range on LO's */
- pAS_Info->bSpurAvoided = 0;
- pAS_Info->nSpursFound = 0;
-
- dprintk(2, "\n");
-
- if (pAS_Info->maxH1 == 0)
- return 0;
-
- /*
- * Avoid LO Generated Spurs
- *
- * Make sure that have no LO-related spurs within the IF output
- * bandwidth.
- *
- * If there is an LO spur in this band, start at the current IF1 frequency
- * and work out until we find a spur-free frequency or run up against the
- * 1st IF SAW band edge. Use temporary copies of fLO1 and fLO2 so that they
- * will be unchanged if a spur-free setting is not found.
- */
- pAS_Info->bSpurPresent = IsSpurInBand(pAS_Info, &fm, &fp);
- if (pAS_Info->bSpurPresent) {
- u32 zfIF1 = pAS_Info->f_LO1 - pAS_Info->f_in; /* current attempt at a 1st IF */
- u32 zfLO1 = pAS_Info->f_LO1; /* current attempt at an LO1 freq */
- u32 zfLO2 = pAS_Info->f_LO2; /* current attempt at an LO2 freq */
- u32 delta_IF1;
- u32 new_IF1;
-
- /*
- ** Spur was found, attempt to find a spur-free 1st IF
- */
- do {
- pAS_Info->nSpursFound++;
-
- /* Raise f_IF1_upper, if needed */
- MT2063_AddExclZone(pAS_Info, zfIF1 - fm, zfIF1 + fp);
-
- /* Choose next IF1 that is closest to f_IF1_CENTER */
- new_IF1 = MT2063_ChooseFirstIF(pAS_Info);
-
- if (new_IF1 > zfIF1) {
- pAS_Info->f_LO1 += (new_IF1 - zfIF1);
- pAS_Info->f_LO2 += (new_IF1 - zfIF1);
- } else {
- pAS_Info->f_LO1 -= (zfIF1 - new_IF1);
- pAS_Info->f_LO2 -= (zfIF1 - new_IF1);
- }
- zfIF1 = new_IF1;
-
- if (zfIF1 > pAS_Info->f_if1_Center)
- delta_IF1 = zfIF1 - pAS_Info->f_if1_Center;
- else
- delta_IF1 = pAS_Info->f_if1_Center - zfIF1;
-
- pAS_Info->bSpurPresent = IsSpurInBand(pAS_Info, &fm, &fp);
- /*
- * Continue while the new 1st IF is still within the 1st IF bandwidth
- * and there is a spur in the band (again)
- */
- } while ((2 * delta_IF1 + pAS_Info->f_out_bw <= pAS_Info->f_if1_bw) && pAS_Info->bSpurPresent);
-
- /*
- * Use the LO-spur free values found. If the search went all
- * the way to the 1st IF band edge and always found spurs, just
- * leave the original choice. It's as "good" as any other.
- */
- if (pAS_Info->bSpurPresent == 1) {
- status |= MT2063_SPUR_PRESENT_ERR;
- pAS_Info->f_LO1 = zfLO1;
- pAS_Info->f_LO2 = zfLO2;
- } else
- pAS_Info->bSpurAvoided = 1;
- }
-
- status |=
- ((pAS_Info->
- nSpursFound << MT2063_SPUR_SHIFT) & MT2063_SPUR_CNT_MASK);
-
- return status;
-}
-
-/*
- * Constants used by the tuning algorithm
- */
-#define MT2063_REF_FREQ (16000000UL) /* Reference oscillator Frequency (in Hz) */
-#define MT2063_IF1_BW (22000000UL) /* The IF1 filter bandwidth (in Hz) */
-#define MT2063_TUNE_STEP_SIZE (50000UL) /* Tune in steps of 50 kHz */
-#define MT2063_SPUR_STEP_HZ (250000UL) /* Step size (in Hz) to move IF1 when avoiding spurs */
-#define MT2063_ZIF_BW (2000000UL) /* Zero-IF spur-free bandwidth (in Hz) */
-#define MT2063_MAX_HARMONICS_1 (15UL) /* Highest intra-tuner LO Spur Harmonic to be avoided */
-#define MT2063_MAX_HARMONICS_2 (5UL) /* Highest inter-tuner LO Spur Harmonic to be avoided */
-#define MT2063_MIN_LO_SEP (1000000UL) /* Minimum inter-tuner LO frequency separation */
-#define MT2063_LO1_FRACN_AVOID (0UL) /* LO1 FracN numerator avoid region (in Hz) */
-#define MT2063_LO2_FRACN_AVOID (199999UL) /* LO2 FracN numerator avoid region (in Hz) */
-#define MT2063_MIN_FIN_FREQ (44000000UL) /* Minimum input frequency (in Hz) */
-#define MT2063_MAX_FIN_FREQ (1100000000UL) /* Maximum input frequency (in Hz) */
-#define MT2063_MIN_FOUT_FREQ (36000000UL) /* Minimum output frequency (in Hz) */
-#define MT2063_MAX_FOUT_FREQ (57000000UL) /* Maximum output frequency (in Hz) */
-#define MT2063_MIN_DNC_FREQ (1293000000UL) /* Minimum LO2 frequency (in Hz) */
-#define MT2063_MAX_DNC_FREQ (1614000000UL) /* Maximum LO2 frequency (in Hz) */
-#define MT2063_MIN_UPC_FREQ (1396000000UL) /* Minimum LO1 frequency (in Hz) */
-#define MT2063_MAX_UPC_FREQ (2750000000UL) /* Maximum LO1 frequency (in Hz) */
-
-/*
- * Define the supported Part/Rev codes for the MT2063
- */
-#define MT2063_B0 (0x9B)
-#define MT2063_B1 (0x9C)
-#define MT2063_B2 (0x9D)
-#define MT2063_B3 (0x9E)
-
-/**
- * mt2063_lockStatus - Checks to see if LO1 and LO2 are locked
- *
- * @state: struct mt2063_state pointer
- *
- * This function returns 0, if no lock, 1 if locked and a value < 1 if error
- */
-static unsigned int mt2063_lockStatus(struct mt2063_state *state)
-{
- const u32 nMaxWait = 100; /* wait a maximum of 100 msec */
- const u32 nPollRate = 2; /* poll status bits every 2 ms */
- const u32 nMaxLoops = nMaxWait / nPollRate;
- const u8 LO1LK = 0x80;
- u8 LO2LK = 0x08;
- u32 status;
- u32 nDelays = 0;
-
- dprintk(2, "\n");
-
- /* LO2 Lock bit was in a different place for B0 version */
- if (state->tuner_id == MT2063_B0)
- LO2LK = 0x40;
-
- do {
- status = mt2063_read(state, MT2063_REG_LO_STATUS,
- &state->reg[MT2063_REG_LO_STATUS], 1);
-
- if (status < 0)
- return status;
-
- if ((state->reg[MT2063_REG_LO_STATUS] & (LO1LK | LO2LK)) ==
- (LO1LK | LO2LK)) {
- return TUNER_STATUS_LOCKED | TUNER_STATUS_STEREO;
- }
- msleep(nPollRate); /* Wait between retries */
- } while (++nDelays < nMaxLoops);
-
- /*
- * Got no lock or partial lock
- */
- return 0;
-}
-
-/*
- * Constants for setting receiver modes.
- * (6 modes defined at this time, enumerated by mt2063_delivery_sys)
- * (DNC1GC & DNC2GC are the values, which are used, when the specific
- * DNC Output is selected, the other is always off)
- *
- * enum mt2063_delivery_sys
- * -------------+----------------------------------------------
- * Mode 0 : | MT2063_CABLE_QAM
- * Mode 1 : | MT2063_CABLE_ANALOG
- * Mode 2 : | MT2063_OFFAIR_COFDM
- * Mode 3 : | MT2063_OFFAIR_COFDM_SAWLESS
- * Mode 4 : | MT2063_OFFAIR_ANALOG
- * Mode 5 : | MT2063_OFFAIR_8VSB
- * --------------+----------------------------------------------
- *
- * |<---------- Mode -------------->|
- * Reg Field | 0 | 1 | 2 | 3 | 4 | 5 |
- * ------------+-----+-----+-----+-----+-----+-----+
- * RFAGCen | OFF | OFF | OFF | OFF | OFF | OFF
- * LNARin | 0 | 0 | 3 | 3 | 3 | 3
- * FIFFQen | 1 | 1 | 1 | 1 | 1 | 1
- * FIFFq | 0 | 0 | 0 | 0 | 0 | 0
- * DNC1gc | 0 | 0 | 0 | 0 | 0 | 0
- * DNC2gc | 0 | 0 | 0 | 0 | 0 | 0
- * GCU Auto | 1 | 1 | 1 | 1 | 1 | 1
- * LNA max Atn | 31 | 31 | 31 | 31 | 31 | 31
- * LNA Target | 44 | 43 | 43 | 43 | 43 | 43
- * ign RF Ovl | 0 | 0 | 0 | 0 | 0 | 0
- * RF max Atn | 31 | 31 | 31 | 31 | 31 | 31
- * PD1 Target | 36 | 36 | 38 | 38 | 36 | 38
- * ign FIF Ovl | 0 | 0 | 0 | 0 | 0 | 0
- * FIF max Atn | 5 | 5 | 5 | 5 | 5 | 5
- * PD2 Target | 40 | 33 | 42 | 42 | 33 | 42
- */
-
-enum mt2063_delivery_sys {
- MT2063_CABLE_QAM = 0,
- MT2063_CABLE_ANALOG,
- MT2063_OFFAIR_COFDM,
- MT2063_OFFAIR_COFDM_SAWLESS,
- MT2063_OFFAIR_ANALOG,
- MT2063_OFFAIR_8VSB,
- MT2063_NUM_RCVR_MODES
-};
-
-static const char *mt2063_mode_name[] = {
- [MT2063_CABLE_QAM] = "digital cable",
- [MT2063_CABLE_ANALOG] = "analog cable",
- [MT2063_OFFAIR_COFDM] = "digital offair",
- [MT2063_OFFAIR_COFDM_SAWLESS] = "digital offair without SAW",
- [MT2063_OFFAIR_ANALOG] = "analog offair",
- [MT2063_OFFAIR_8VSB] = "analog offair 8vsb",
-};
-
-static const u8 RFAGCEN[] = { 0, 0, 0, 0, 0, 0 };
-static const u8 LNARIN[] = { 0, 0, 3, 3, 3, 3 };
-static const u8 FIFFQEN[] = { 1, 1, 1, 1, 1, 1 };
-static const u8 FIFFQ[] = { 0, 0, 0, 0, 0, 0 };
-static const u8 DNC1GC[] = { 0, 0, 0, 0, 0, 0 };
-static const u8 DNC2GC[] = { 0, 0, 0, 0, 0, 0 };
-static const u8 ACLNAMAX[] = { 31, 31, 31, 31, 31, 31 };
-static const u8 LNATGT[] = { 44, 43, 43, 43, 43, 43 };
-static const u8 RFOVDIS[] = { 0, 0, 0, 0, 0, 0 };
-static const u8 ACRFMAX[] = { 31, 31, 31, 31, 31, 31 };
-static const u8 PD1TGT[] = { 36, 36, 38, 38, 36, 38 };
-static const u8 FIFOVDIS[] = { 0, 0, 0, 0, 0, 0 };
-static const u8 ACFIFMAX[] = { 29, 29, 29, 29, 29, 29 };
-static const u8 PD2TGT[] = { 40, 33, 38, 42, 30, 38 };
-
-/*
- * mt2063_set_dnc_output_enable()
- */
-static u32 mt2063_get_dnc_output_enable(struct mt2063_state *state,
- enum MT2063_DNC_Output_Enable *pValue)
-{
- dprintk(2, "\n");
-
- if ((state->reg[MT2063_REG_DNC_GAIN] & 0x03) == 0x03) { /* if DNC1 is off */
- if ((state->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03) /* if DNC2 is off */
- *pValue = MT2063_DNC_NONE;
- else
- *pValue = MT2063_DNC_2;
- } else { /* DNC1 is on */
- if ((state->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03) /* if DNC2 is off */
- *pValue = MT2063_DNC_1;
- else
- *pValue = MT2063_DNC_BOTH;
- }
- return 0;
-}
-
-/*
- * mt2063_set_dnc_output_enable()
- */
-static u32 mt2063_set_dnc_output_enable(struct mt2063_state *state,
- enum MT2063_DNC_Output_Enable nValue)
-{
- u32 status = 0; /* Status to be returned */
- u8 val = 0;
-
- dprintk(2, "\n");
-
- /* selects, which DNC output is used */
- switch (nValue) {
- case MT2063_DNC_NONE:
- val = (state->reg[MT2063_REG_DNC_GAIN] & 0xFC) | 0x03; /* Set DNC1GC=3 */
- if (state->reg[MT2063_REG_DNC_GAIN] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_DNC_GAIN,
- val);
-
- val = (state->reg[MT2063_REG_VGA_GAIN] & 0xFC) | 0x03; /* Set DNC2GC=3 */
- if (state->reg[MT2063_REG_VGA_GAIN] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_VGA_GAIN,
- val);
-
- val = (state->reg[MT2063_REG_RSVD_20] & ~0x40); /* Set PD2MUX=0 */
- if (state->reg[MT2063_REG_RSVD_20] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_RSVD_20,
- val);
-
- break;
- case MT2063_DNC_1:
- val = (state->reg[MT2063_REG_DNC_GAIN] & 0xFC) | (DNC1GC[state->rcvr_mode] & 0x03); /* Set DNC1GC=x */
- if (state->reg[MT2063_REG_DNC_GAIN] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_DNC_GAIN,
- val);
-
- val = (state->reg[MT2063_REG_VGA_GAIN] & 0xFC) | 0x03; /* Set DNC2GC=3 */
- if (state->reg[MT2063_REG_VGA_GAIN] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_VGA_GAIN,
- val);
-
- val = (state->reg[MT2063_REG_RSVD_20] & ~0x40); /* Set PD2MUX=0 */
- if (state->reg[MT2063_REG_RSVD_20] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_RSVD_20,
- val);
-
- break;
- case MT2063_DNC_2:
- val = (state->reg[MT2063_REG_DNC_GAIN] & 0xFC) | 0x03; /* Set DNC1GC=3 */
- if (state->reg[MT2063_REG_DNC_GAIN] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_DNC_GAIN,
- val);
-
- val = (state->reg[MT2063_REG_VGA_GAIN] & 0xFC) | (DNC2GC[state->rcvr_mode] & 0x03); /* Set DNC2GC=x */
- if (state->reg[MT2063_REG_VGA_GAIN] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_VGA_GAIN,
- val);
-
- val = (state->reg[MT2063_REG_RSVD_20] | 0x40); /* Set PD2MUX=1 */
- if (state->reg[MT2063_REG_RSVD_20] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_RSVD_20,
- val);
-
- break;
- case MT2063_DNC_BOTH:
- val = (state->reg[MT2063_REG_DNC_GAIN] & 0xFC) | (DNC1GC[state->rcvr_mode] & 0x03); /* Set DNC1GC=x */
- if (state->reg[MT2063_REG_DNC_GAIN] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_DNC_GAIN,
- val);
-
- val = (state->reg[MT2063_REG_VGA_GAIN] & 0xFC) | (DNC2GC[state->rcvr_mode] & 0x03); /* Set DNC2GC=x */
- if (state->reg[MT2063_REG_VGA_GAIN] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_VGA_GAIN,
- val);
-
- val = (state->reg[MT2063_REG_RSVD_20] | 0x40); /* Set PD2MUX=1 */
- if (state->reg[MT2063_REG_RSVD_20] !=
- val)
- status |=
- mt2063_setreg(state,
- MT2063_REG_RSVD_20,
- val);
-
- break;
- default:
- break;
- }
-
- return status;
-}
-
-/*
- * MT2063_SetReceiverMode() - Set the MT2063 receiver mode, according with
- * the selected enum mt2063_delivery_sys type.
- *
- * (DNC1GC & DNC2GC are the values, which are used, when the specific
- * DNC Output is selected, the other is always off)
- *
- * @state: ptr to mt2063_state structure
- * @Mode: desired reciever delivery system
- *
- * Note: Register cache must be valid for it to work
- */
-
-static u32 MT2063_SetReceiverMode(struct mt2063_state *state,
- enum mt2063_delivery_sys Mode)
-{
- u32 status = 0; /* Status to be returned */
- u8 val;
- u32 longval;
-
- dprintk(2, "\n");
-
- if (Mode >= MT2063_NUM_RCVR_MODES)
- status = -ERANGE;
-
- /* RFAGCen */
- if (status >= 0) {
- val =
- (state->
- reg[MT2063_REG_PD1_TGT] & (u8) ~0x40) | (RFAGCEN[Mode]
- ? 0x40 :
- 0x00);
- if (state->reg[MT2063_REG_PD1_TGT] != val)
- status |= mt2063_setreg(state, MT2063_REG_PD1_TGT, val);
- }
-
- /* LNARin */
- if (status >= 0) {
- u8 val = (state->reg[MT2063_REG_CTRL_2C] & (u8) ~0x03) |
- (LNARIN[Mode] & 0x03);
- if (state->reg[MT2063_REG_CTRL_2C] != val)
- status |= mt2063_setreg(state, MT2063_REG_CTRL_2C, val);
- }
-
- /* FIFFQEN and FIFFQ */
- if (status >= 0) {
- val =
- (state->
- reg[MT2063_REG_FIFF_CTRL2] & (u8) ~0xF0) |
- (FIFFQEN[Mode] << 7) | (FIFFQ[Mode] << 4);
- if (state->reg[MT2063_REG_FIFF_CTRL2] != val) {
- status |=
- mt2063_setreg(state, MT2063_REG_FIFF_CTRL2, val);
- /* trigger FIFF calibration, needed after changing FIFFQ */
- val =
- (state->reg[MT2063_REG_FIFF_CTRL] | (u8) 0x01);
- status |=
- mt2063_setreg(state, MT2063_REG_FIFF_CTRL, val);
- val =
- (state->
- reg[MT2063_REG_FIFF_CTRL] & (u8) ~0x01);
- status |=
- mt2063_setreg(state, MT2063_REG_FIFF_CTRL, val);
- }
- }
-
- /* DNC1GC & DNC2GC */
- status |= mt2063_get_dnc_output_enable(state, &longval);
- status |= mt2063_set_dnc_output_enable(state, longval);
-
- /* acLNAmax */
- if (status >= 0) {
- u8 val = (state->reg[MT2063_REG_LNA_OV] & (u8) ~0x1F) |
- (ACLNAMAX[Mode] & 0x1F);
- if (state->reg[MT2063_REG_LNA_OV] != val)
- status |= mt2063_setreg(state, MT2063_REG_LNA_OV, val);
- }
-
- /* LNATGT */
- if (status >= 0) {
- u8 val = (state->reg[MT2063_REG_LNA_TGT] & (u8) ~0x3F) |
- (LNATGT[Mode] & 0x3F);
- if (state->reg[MT2063_REG_LNA_TGT] != val)
- status |= mt2063_setreg(state, MT2063_REG_LNA_TGT, val);
- }
-
- /* ACRF */
- if (status >= 0) {
- u8 val = (state->reg[MT2063_REG_RF_OV] & (u8) ~0x1F) |
- (ACRFMAX[Mode] & 0x1F);
- if (state->reg[MT2063_REG_RF_OV] != val)
- status |= mt2063_setreg(state, MT2063_REG_RF_OV, val);
- }
-
- /* PD1TGT */
- if (status >= 0) {
- u8 val = (state->reg[MT2063_REG_PD1_TGT] & (u8) ~0x3F) |
- (PD1TGT[Mode] & 0x3F);
- if (state->reg[MT2063_REG_PD1_TGT] != val)
- status |= mt2063_setreg(state, MT2063_REG_PD1_TGT, val);
- }
-
- /* FIFATN */
- if (status >= 0) {
- u8 val = ACFIFMAX[Mode];
- if (state->reg[MT2063_REG_PART_REV] != MT2063_B3 && val > 5)
- val = 5;
- val = (state->reg[MT2063_REG_FIF_OV] & (u8) ~0x1F) |
- (val & 0x1F);
- if (state->reg[MT2063_REG_FIF_OV] != val)
- status |= mt2063_setreg(state, MT2063_REG_FIF_OV, val);
- }
-
- /* PD2TGT */
- if (status >= 0) {
- u8 val = (state->reg[MT2063_REG_PD2_TGT] & (u8) ~0x3F) |
- (PD2TGT[Mode] & 0x3F);
- if (state->reg[MT2063_REG_PD2_TGT] != val)
- status |= mt2063_setreg(state, MT2063_REG_PD2_TGT, val);
- }
-
- /* Ignore ATN Overload */
- if (status >= 0) {
- val = (state->reg[MT2063_REG_LNA_TGT] & (u8) ~0x80) |
- (RFOVDIS[Mode] ? 0x80 : 0x00);
- if (state->reg[MT2063_REG_LNA_TGT] != val)
- status |= mt2063_setreg(state, MT2063_REG_LNA_TGT, val);
- }
-
- /* Ignore FIF Overload */
- if (status >= 0) {
- val = (state->reg[MT2063_REG_PD1_TGT] & (u8) ~0x80) |
- (FIFOVDIS[Mode] ? 0x80 : 0x00);
- if (state->reg[MT2063_REG_PD1_TGT] != val)
- status |= mt2063_setreg(state, MT2063_REG_PD1_TGT, val);
- }
-
- if (status >= 0) {
- state->rcvr_mode = Mode;
- dprintk(1, "mt2063 mode changed to %s\n",
- mt2063_mode_name[state->rcvr_mode]);
- }
-
- return status;
-}
-
-/*
- * MT2063_ClearPowerMaskBits () - Clears the power-down mask bits for various
- * sections of the MT2063
- *
- * @Bits: Mask bits to be cleared.
- *
- * See definition of MT2063_Mask_Bits type for description
- * of each of the power bits.
- */
-static u32 MT2063_ClearPowerMaskBits(struct mt2063_state *state,
- enum MT2063_Mask_Bits Bits)
-{
- u32 status = 0;
-
- dprintk(2, "\n");
- Bits = (enum MT2063_Mask_Bits)(Bits & MT2063_ALL_SD); /* Only valid bits for this tuner */
- if ((Bits & 0xFF00) != 0) {
- state->reg[MT2063_REG_PWR_2] &= ~(u8) (Bits >> 8);
- status |=
- mt2063_write(state,
- MT2063_REG_PWR_2,
- &state->reg[MT2063_REG_PWR_2], 1);
- }
- if ((Bits & 0xFF) != 0) {
- state->reg[MT2063_REG_PWR_1] &= ~(u8) (Bits & 0xFF);
- status |=
- mt2063_write(state,
- MT2063_REG_PWR_1,
- &state->reg[MT2063_REG_PWR_1], 1);
- }
-
- return status;
-}
-
-/*
- * MT2063_SoftwareShutdown() - Enables or disables software shutdown function.
- * When Shutdown is 1, any section whose power
- * mask is set will be shutdown.
- */
-static u32 MT2063_SoftwareShutdown(struct mt2063_state *state, u8 Shutdown)
-{
- u32 status;
-
- dprintk(2, "\n");
- if (Shutdown == 1)
- state->reg[MT2063_REG_PWR_1] |= 0x04;
- else
- state->reg[MT2063_REG_PWR_1] &= ~0x04;
-
- status = mt2063_write(state,
- MT2063_REG_PWR_1,
- &state->reg[MT2063_REG_PWR_1], 1);
-
- if (Shutdown != 1) {
- state->reg[MT2063_REG_BYP_CTRL] =
- (state->reg[MT2063_REG_BYP_CTRL] & 0x9F) | 0x40;
- status |=
- mt2063_write(state,
- MT2063_REG_BYP_CTRL,
- &state->reg[MT2063_REG_BYP_CTRL],
- 1);
- state->reg[MT2063_REG_BYP_CTRL] =
- (state->reg[MT2063_REG_BYP_CTRL] & 0x9F);
- status |=
- mt2063_write(state,
- MT2063_REG_BYP_CTRL,
- &state->reg[MT2063_REG_BYP_CTRL],
- 1);
- }
-
- return status;
-}
-
-static u32 MT2063_Round_fLO(u32 f_LO, u32 f_LO_Step, u32 f_ref)
-{
- return f_ref * (f_LO / f_ref)
- + f_LO_Step * (((f_LO % f_ref) + (f_LO_Step / 2)) / f_LO_Step);
-}
-
-/**
- * fLO_FractionalTerm() - Calculates the portion contributed by FracN / denom.
- * This function preserves maximum precision without
- * risk of overflow. It accurately calculates
- * f_ref * num / denom to within 1 HZ with fixed math.
- *
- * @num : Fractional portion of the multiplier
- * @denom: denominator portion of the ratio
- * @f_Ref: SRO frequency.
- *
- * This calculation handles f_ref as two separate 14-bit fields.
- * Therefore, a maximum value of 2^28-1 may safely be used for f_ref.
- * This is the genesis of the magic number "14" and the magic mask value of
- * 0x03FFF.
- *
- * This routine successfully handles denom values up to and including 2^18.
- * Returns: f_ref * num / denom
- */
-static u32 MT2063_fLO_FractionalTerm(u32 f_ref, u32 num, u32 denom)
-{
- u32 t1 = (f_ref >> 14) * num;
- u32 term1 = t1 / denom;
- u32 loss = t1 % denom;
- u32 term2 =
- (((f_ref & 0x00003FFF) * num + (loss << 14)) + (denom / 2)) / denom;
- return (term1 << 14) + term2;
-}
-
-/*
- * CalcLO1Mult()- Calculates Integer divider value and the numerator
- * value for a FracN PLL.
- *
- * This function assumes that the f_LO and f_Ref are
- * evenly divisible by f_LO_Step.
- *
- * @Div: OUTPUT: Whole number portion of the multiplier
- * @FracN: OUTPUT: Fractional portion of the multiplier
- * @f_LO: desired LO frequency.
- * @f_LO_Step: Minimum step size for the LO (in Hz).
- * @f_Ref: SRO frequency.
- * @f_Avoid: Range of PLL frequencies to avoid near integer multiples
- * of f_Ref (in Hz).
- *
- * Returns: Recalculated LO frequency.
- */
-static u32 MT2063_CalcLO1Mult(u32 *Div,
- u32 *FracN,
- u32 f_LO,
- u32 f_LO_Step, u32 f_Ref)
-{
- /* Calculate the whole number portion of the divider */
- *Div = f_LO / f_Ref;
-
- /* Calculate the numerator value (round to nearest f_LO_Step) */
- *FracN =
- (64 * (((f_LO % f_Ref) + (f_LO_Step / 2)) / f_LO_Step) +
- (f_Ref / f_LO_Step / 2)) / (f_Ref / f_LO_Step);
-
- return (f_Ref * (*Div)) + MT2063_fLO_FractionalTerm(f_Ref, *FracN, 64);
-}
-
-/**
- * CalcLO2Mult() - Calculates Integer divider value and the numerator
- * value for a FracN PLL.
- *
- * This function assumes that the f_LO and f_Ref are
- * evenly divisible by f_LO_Step.
- *
- * @Div: OUTPUT: Whole number portion of the multiplier
- * @FracN: OUTPUT: Fractional portion of the multiplier
- * @f_LO: desired LO frequency.
- * @f_LO_Step: Minimum step size for the LO (in Hz).
- * @f_Ref: SRO frequency.
- * @f_Avoid: Range of PLL frequencies to avoid near
- * integer multiples of f_Ref (in Hz).
- *
- * Returns: Recalculated LO frequency.
- */
-static u32 MT2063_CalcLO2Mult(u32 *Div,
- u32 *FracN,
- u32 f_LO,
- u32 f_LO_Step, u32 f_Ref)
-{
- /* Calculate the whole number portion of the divider */
- *Div = f_LO / f_Ref;
-
- /* Calculate the numerator value (round to nearest f_LO_Step) */
- *FracN =
- (8191 * (((f_LO % f_Ref) + (f_LO_Step / 2)) / f_LO_Step) +
- (f_Ref / f_LO_Step / 2)) / (f_Ref / f_LO_Step);
-
- return (f_Ref * (*Div)) + MT2063_fLO_FractionalTerm(f_Ref, *FracN,
- 8191);
-}
-
-/*
- * FindClearTuneFilter() - Calculate the corrrect ClearTune filter to be
- * used for a given input frequency.
- *
- * @state: ptr to tuner data structure
- * @f_in: RF input center frequency (in Hz).
- *
- * Returns: ClearTune filter number (0-31)
- */
-static u32 FindClearTuneFilter(struct mt2063_state *state, u32 f_in)
-{
- u32 RFBand;
- u32 idx; /* index loop */
-
- /*
- ** Find RF Band setting
- */
- RFBand = 31; /* def when f_in > all */
- for (idx = 0; idx < 31; ++idx) {
- if (state->CTFiltMax[idx] >= f_in) {
- RFBand = idx;
- break;
- }
- }
- return RFBand;
-}
-
-/*
- * MT2063_Tune() - Change the tuner's tuned frequency to RFin.
- */
-static u32 MT2063_Tune(struct mt2063_state *state, u32 f_in)
-{ /* RF input center frequency */
-
- u32 status = 0;
- u32 LO1; /* 1st LO register value */
- u32 Num1; /* Numerator for LO1 reg. value */
- u32 f_IF1; /* 1st IF requested */
- u32 LO2; /* 2nd LO register value */
- u32 Num2; /* Numerator for LO2 reg. value */
- u32 ofLO1, ofLO2; /* last time's LO frequencies */
- u8 fiffc = 0x80; /* FIFF center freq from tuner */
- u32 fiffof; /* Offset from FIFF center freq */
- const u8 LO1LK = 0x80; /* Mask for LO1 Lock bit */
- u8 LO2LK = 0x08; /* Mask for LO2 Lock bit */
- u8 val;
- u32 RFBand;
-
- dprintk(2, "\n");
- /* Check the input and output frequency ranges */
- if ((f_in < MT2063_MIN_FIN_FREQ) || (f_in > MT2063_MAX_FIN_FREQ))
- return -EINVAL;
-
- if ((state->AS_Data.f_out < MT2063_MIN_FOUT_FREQ)
- || (state->AS_Data.f_out > MT2063_MAX_FOUT_FREQ))
- return -EINVAL;
-
- /*
- * Save original LO1 and LO2 register values
- */
- ofLO1 = state->AS_Data.f_LO1;
- ofLO2 = state->AS_Data.f_LO2;
-
- /*
- * Find and set RF Band setting
- */
- if (state->ctfilt_sw == 1) {
- val = (state->reg[MT2063_REG_CTUNE_CTRL] | 0x08);
- if (state->reg[MT2063_REG_CTUNE_CTRL] != val) {
- status |=
- mt2063_setreg(state, MT2063_REG_CTUNE_CTRL, val);
- }
- val = state->reg[MT2063_REG_CTUNE_OV];
- RFBand = FindClearTuneFilter(state, f_in);
- state->reg[MT2063_REG_CTUNE_OV] =
- (u8) ((state->reg[MT2063_REG_CTUNE_OV] & ~0x1F)
- | RFBand);
- if (state->reg[MT2063_REG_CTUNE_OV] != val) {
- status |=
- mt2063_setreg(state, MT2063_REG_CTUNE_OV, val);
- }
- }
-
- /*
- * Read the FIFF Center Frequency from the tuner
- */
- if (status >= 0) {
- status |=
- mt2063_read(state,
- MT2063_REG_FIFFC,
- &state->reg[MT2063_REG_FIFFC], 1);
- fiffc = state->reg[MT2063_REG_FIFFC];
- }
- /*
- * Assign in the requested values
- */
- state->AS_Data.f_in = f_in;
- /* Request a 1st IF such that LO1 is on a step size */
- state->AS_Data.f_if1_Request =
- MT2063_Round_fLO(state->AS_Data.f_if1_Request + f_in,
- state->AS_Data.f_LO1_Step,
- state->AS_Data.f_ref) - f_in;
-
- /*
- * Calculate frequency settings. f_IF1_FREQ + f_in is the
- * desired LO1 frequency
- */
- MT2063_ResetExclZones(&state->AS_Data);
-
- f_IF1 = MT2063_ChooseFirstIF(&state->AS_Data);
-
- state->AS_Data.f_LO1 =
- MT2063_Round_fLO(f_IF1 + f_in, state->AS_Data.f_LO1_Step,
- state->AS_Data.f_ref);
-
- state->AS_Data.f_LO2 =
- MT2063_Round_fLO(state->AS_Data.f_LO1 - state->AS_Data.f_out - f_in,
- state->AS_Data.f_LO2_Step, state->AS_Data.f_ref);
-
- /*
- * Check for any LO spurs in the output bandwidth and adjust
- * the LO settings to avoid them if needed
- */
- status |= MT2063_AvoidSpurs(&state->AS_Data);
- /*
- * MT_AvoidSpurs spurs may have changed the LO1 & LO2 values.
- * Recalculate the LO frequencies and the values to be placed
- * in the tuning registers.
- */
- state->AS_Data.f_LO1 =
- MT2063_CalcLO1Mult(&LO1, &Num1, state->AS_Data.f_LO1,
- state->AS_Data.f_LO1_Step, state->AS_Data.f_ref);
- state->AS_Data.f_LO2 =
- MT2063_Round_fLO(state->AS_Data.f_LO1 - state->AS_Data.f_out - f_in,
- state->AS_Data.f_LO2_Step, state->AS_Data.f_ref);
- state->AS_Data.f_LO2 =
- MT2063_CalcLO2Mult(&LO2, &Num2, state->AS_Data.f_LO2,
- state->AS_Data.f_LO2_Step, state->AS_Data.f_ref);
-
- /*
- * Check the upconverter and downconverter frequency ranges
- */
- if ((state->AS_Data.f_LO1 < MT2063_MIN_UPC_FREQ)
- || (state->AS_Data.f_LO1 > MT2063_MAX_UPC_FREQ))
- status |= MT2063_UPC_RANGE;
- if ((state->AS_Data.f_LO2 < MT2063_MIN_DNC_FREQ)
- || (state->AS_Data.f_LO2 > MT2063_MAX_DNC_FREQ))
- status |= MT2063_DNC_RANGE;
- /* LO2 Lock bit was in a different place for B0 version */
- if (state->tuner_id == MT2063_B0)
- LO2LK = 0x40;
-
- /*
- * If we have the same LO frequencies and we're already locked,
- * then skip re-programming the LO registers.
- */
- if ((ofLO1 != state->AS_Data.f_LO1)
- || (ofLO2 != state->AS_Data.f_LO2)
- || ((state->reg[MT2063_REG_LO_STATUS] & (LO1LK | LO2LK)) !=
- (LO1LK | LO2LK))) {
- /*
- * Calculate the FIFFOF register value
- *
- * IF1_Actual
- * FIFFOF = ------------ - 8 * FIFFC - 4992
- * f_ref/64
- */
- fiffof =
- (state->AS_Data.f_LO1 -
- f_in) / (state->AS_Data.f_ref / 64) - 8 * (u32) fiffc -
- 4992;
- if (fiffof > 0xFF)
- fiffof = 0xFF;
-
- /*
- * Place all of the calculated values into the local tuner
- * register fields.
- */
- if (status >= 0) {
- state->reg[MT2063_REG_LO1CQ_1] = (u8) (LO1 & 0xFF); /* DIV1q */
- state->reg[MT2063_REG_LO1CQ_2] = (u8) (Num1 & 0x3F); /* NUM1q */
- state->reg[MT2063_REG_LO2CQ_1] = (u8) (((LO2 & 0x7F) << 1) /* DIV2q */
- |(Num2 >> 12)); /* NUM2q (hi) */
- state->reg[MT2063_REG_LO2CQ_2] = (u8) ((Num2 & 0x0FF0) >> 4); /* NUM2q (mid) */
- state->reg[MT2063_REG_LO2CQ_3] = (u8) (0xE0 | (Num2 & 0x000F)); /* NUM2q (lo) */
-
- /*
- * Now write out the computed register values
- * IMPORTANT: There is a required order for writing
- * (0x05 must follow all the others).
- */
- status |= mt2063_write(state, MT2063_REG_LO1CQ_1, &state->reg[MT2063_REG_LO1CQ_1], 5); /* 0x01 - 0x05 */
- if (state->tuner_id == MT2063_B0) {
- /* Re-write the one-shot bits to trigger the tune operation */
- status |= mt2063_write(state, MT2063_REG_LO2CQ_3, &state->reg[MT2063_REG_LO2CQ_3], 1); /* 0x05 */
- }
- /* Write out the FIFF offset only if it's changing */
- if (state->reg[MT2063_REG_FIFF_OFFSET] !=
- (u8) fiffof) {
- state->reg[MT2063_REG_FIFF_OFFSET] =
- (u8) fiffof;
- status |=
- mt2063_write(state,
- MT2063_REG_FIFF_OFFSET,
- &state->
- reg[MT2063_REG_FIFF_OFFSET],
- 1);
- }
- }
-
- /*
- * Check for LO's locking
- */
-
- if (status < 0)
- return status;
-
- status = mt2063_lockStatus(state);
- if (status < 0)
- return status;
- if (!status)
- return -EINVAL; /* Couldn't lock */
-
- /*
- * If we locked OK, assign calculated data to mt2063_state structure
- */
- state->f_IF1_actual = state->AS_Data.f_LO1 - f_in;
- }
-
- return status;
-}
-
-static const u8 MT2063B0_defaults[] = {
- /* Reg, Value */
- 0x19, 0x05,
- 0x1B, 0x1D,
- 0x1C, 0x1F,
- 0x1D, 0x0F,
- 0x1E, 0x3F,
- 0x1F, 0x0F,
- 0x20, 0x3F,
- 0x22, 0x21,
- 0x23, 0x3F,
- 0x24, 0x20,
- 0x25, 0x3F,
- 0x27, 0xEE,
- 0x2C, 0x27, /* bit at 0x20 is cleared below */
- 0x30, 0x03,
- 0x2C, 0x07, /* bit at 0x20 is cleared here */
- 0x2D, 0x87,
- 0x2E, 0xAA,
- 0x28, 0xE1, /* Set the FIFCrst bit here */
- 0x28, 0xE0, /* Clear the FIFCrst bit here */
- 0x00
-};
-
-/* writing 0x05 0xf0 sw-resets all registers, so we write only needed changes */
-static const u8 MT2063B1_defaults[] = {
- /* Reg, Value */
- 0x05, 0xF0,
- 0x11, 0x10, /* New Enable AFCsd */
- 0x19, 0x05,
- 0x1A, 0x6C,
- 0x1B, 0x24,
- 0x1C, 0x28,
- 0x1D, 0x8F,
- 0x1E, 0x14,
- 0x1F, 0x8F,
- 0x20, 0x57,
- 0x22, 0x21, /* New - ver 1.03 */
- 0x23, 0x3C, /* New - ver 1.10 */
- 0x24, 0x20, /* New - ver 1.03 */
- 0x2C, 0x24, /* bit at 0x20 is cleared below */
- 0x2D, 0x87, /* FIFFQ=0 */
- 0x2F, 0xF3,
- 0x30, 0x0C, /* New - ver 1.11 */
- 0x31, 0x1B, /* New - ver 1.11 */
- 0x2C, 0x04, /* bit at 0x20 is cleared here */
- 0x28, 0xE1, /* Set the FIFCrst bit here */
- 0x28, 0xE0, /* Clear the FIFCrst bit here */
- 0x00
-};
-
-/* writing 0x05 0xf0 sw-resets all registers, so we write only needed changes */
-static const u8 MT2063B3_defaults[] = {
- /* Reg, Value */
- 0x05, 0xF0,
- 0x19, 0x3D,
- 0x2C, 0x24, /* bit at 0x20 is cleared below */
- 0x2C, 0x04, /* bit at 0x20 is cleared here */
- 0x28, 0xE1, /* Set the FIFCrst bit here */
- 0x28, 0xE0, /* Clear the FIFCrst bit here */
- 0x00
-};
-
-static int mt2063_init(struct dvb_frontend *fe)
-{
- u32 status;
- struct mt2063_state *state = fe->tuner_priv;
- u8 all_resets = 0xF0; /* reset/load bits */
- const u8 *def = NULL;
- char *step;
- u32 FCRUN;
- s32 maxReads;
- u32 fcu_osc;
- u32 i;
-
- dprintk(2, "\n");
-
- state->rcvr_mode = MT2063_CABLE_QAM;
-
- /* Read the Part/Rev code from the tuner */
- status = mt2063_read(state, MT2063_REG_PART_REV,
- &state->reg[MT2063_REG_PART_REV], 1);
- if (status < 0) {
- printk(KERN_ERR "Can't read mt2063 part ID\n");
- return status;
- }
-
- /* Check the part/rev code */
- switch (state->reg[MT2063_REG_PART_REV]) {
- case MT2063_B0:
- step = "B0";
- break;
- case MT2063_B1:
- step = "B1";
- break;
- case MT2063_B2:
- step = "B2";
- break;
- case MT2063_B3:
- step = "B3";
- break;
- default:
- printk(KERN_ERR "mt2063: Unknown mt2063 device ID (0x%02x)\n",
- state->reg[MT2063_REG_PART_REV]);
- return -ENODEV; /* Wrong tuner Part/Rev code */
- }
-
- /* Check the 2nd byte of the Part/Rev code from the tuner */
- status = mt2063_read(state, MT2063_REG_RSVD_3B,
- &state->reg[MT2063_REG_RSVD_3B], 1);
-
- /* b7 != 0 ==> NOT MT2063 */
- if (status < 0 || ((state->reg[MT2063_REG_RSVD_3B] & 0x80) != 0x00)) {
- printk(KERN_ERR "mt2063: Unknown part ID (0x%02x%02x)\n",
- state->reg[MT2063_REG_PART_REV],
- state->reg[MT2063_REG_RSVD_3B]);
- return -ENODEV; /* Wrong tuner Part/Rev code */
- }
-
- printk(KERN_INFO "mt2063: detected a mt2063 %s\n", step);
-
- /* Reset the tuner */
- status = mt2063_write(state, MT2063_REG_LO2CQ_3, &all_resets, 1);
- if (status < 0)
- return status;
-
- /* change all of the default values that vary from the HW reset values */
- /* def = (state->reg[PART_REV] == MT2063_B0) ? MT2063B0_defaults : MT2063B1_defaults; */
- switch (state->reg[MT2063_REG_PART_REV]) {
- case MT2063_B3:
- def = MT2063B3_defaults;
- break;
-
- case MT2063_B1:
- def = MT2063B1_defaults;
- break;
-
- case MT2063_B0:
- def = MT2063B0_defaults;
- break;
-
- default:
- return -ENODEV;
- break;
- }
-
- while (status >= 0 && *def) {
- u8 reg = *def++;
- u8 val = *def++;
- status = mt2063_write(state, reg, &val, 1);
- }
- if (status < 0)
- return status;
-
- /* Wait for FIFF location to complete. */
- FCRUN = 1;
- maxReads = 10;
- while (status >= 0 && (FCRUN != 0) && (maxReads-- > 0)) {
- msleep(2);
- status = mt2063_read(state,
- MT2063_REG_XO_STATUS,
- &state->
- reg[MT2063_REG_XO_STATUS], 1);
- FCRUN = (state->reg[MT2063_REG_XO_STATUS] & 0x40) >> 6;
- }
-
- if (FCRUN != 0 || status < 0)
- return -ENODEV;
-
- status = mt2063_read(state,
- MT2063_REG_FIFFC,
- &state->reg[MT2063_REG_FIFFC], 1);
- if (status < 0)
- return status;
-
- /* Read back all the registers from the tuner */
- status = mt2063_read(state,
- MT2063_REG_PART_REV,
- state->reg, MT2063_REG_END_REGS);
- if (status < 0)
- return status;
-
- /* Initialize the tuner state. */
- state->tuner_id = state->reg[MT2063_REG_PART_REV];
- state->AS_Data.f_ref = MT2063_REF_FREQ;
- state->AS_Data.f_if1_Center = (state->AS_Data.f_ref / 8) *
- ((u32) state->reg[MT2063_REG_FIFFC] + 640);
- state->AS_Data.f_if1_bw = MT2063_IF1_BW;
- state->AS_Data.f_out = 43750000UL;
- state->AS_Data.f_out_bw = 6750000UL;
- state->AS_Data.f_zif_bw = MT2063_ZIF_BW;
- state->AS_Data.f_LO1_Step = state->AS_Data.f_ref / 64;
- state->AS_Data.f_LO2_Step = MT2063_TUNE_STEP_SIZE;
- state->AS_Data.maxH1 = MT2063_MAX_HARMONICS_1;
- state->AS_Data.maxH2 = MT2063_MAX_HARMONICS_2;
- state->AS_Data.f_min_LO_Separation = MT2063_MIN_LO_SEP;
- state->AS_Data.f_if1_Request = state->AS_Data.f_if1_Center;
- state->AS_Data.f_LO1 = 2181000000UL;
- state->AS_Data.f_LO2 = 1486249786UL;
- state->f_IF1_actual = state->AS_Data.f_if1_Center;
- state->AS_Data.f_in = state->AS_Data.f_LO1 - state->f_IF1_actual;
- state->AS_Data.f_LO1_FracN_Avoid = MT2063_LO1_FRACN_AVOID;
- state->AS_Data.f_LO2_FracN_Avoid = MT2063_LO2_FRACN_AVOID;
- state->num_regs = MT2063_REG_END_REGS;
- state->AS_Data.avoidDECT = MT2063_AVOID_BOTH;
- state->ctfilt_sw = 0;
-
- state->CTFiltMax[0] = 69230000;
- state->CTFiltMax[1] = 105770000;
- state->CTFiltMax[2] = 140350000;
- state->CTFiltMax[3] = 177110000;
- state->CTFiltMax[4] = 212860000;
- state->CTFiltMax[5] = 241130000;
- state->CTFiltMax[6] = 274370000;
- state->CTFiltMax[7] = 309820000;
- state->CTFiltMax[8] = 342450000;
- state->CTFiltMax[9] = 378870000;
- state->CTFiltMax[10] = 416210000;
- state->CTFiltMax[11] = 456500000;
- state->CTFiltMax[12] = 495790000;
- state->CTFiltMax[13] = 534530000;
- state->CTFiltMax[14] = 572610000;
- state->CTFiltMax[15] = 598970000;
- state->CTFiltMax[16] = 635910000;
- state->CTFiltMax[17] = 672130000;
- state->CTFiltMax[18] = 714840000;
- state->CTFiltMax[19] = 739660000;
- state->CTFiltMax[20] = 770410000;
- state->CTFiltMax[21] = 814660000;
- state->CTFiltMax[22] = 846950000;
- state->CTFiltMax[23] = 867820000;
- state->CTFiltMax[24] = 915980000;
- state->CTFiltMax[25] = 947450000;
- state->CTFiltMax[26] = 983110000;
- state->CTFiltMax[27] = 1021630000;
- state->CTFiltMax[28] = 1061870000;
- state->CTFiltMax[29] = 1098330000;
- state->CTFiltMax[30] = 1138990000;
-
- /*
- ** Fetch the FCU osc value and use it and the fRef value to
- ** scale all of the Band Max values
- */
-
- state->reg[MT2063_REG_CTUNE_CTRL] = 0x0A;
- status = mt2063_write(state, MT2063_REG_CTUNE_CTRL,
- &state->reg[MT2063_REG_CTUNE_CTRL], 1);
- if (status < 0)
- return status;
-
- /* Read the ClearTune filter calibration value */
- status = mt2063_read(state, MT2063_REG_FIFFC,
- &state->reg[MT2063_REG_FIFFC], 1);
- if (status < 0)
- return status;
-
- fcu_osc = state->reg[MT2063_REG_FIFFC];
-
- state->reg[MT2063_REG_CTUNE_CTRL] = 0x00;
- status = mt2063_write(state, MT2063_REG_CTUNE_CTRL,
- &state->reg[MT2063_REG_CTUNE_CTRL], 1);
- if (status < 0)
- return status;
-
- /* Adjust each of the values in the ClearTune filter cross-over table */
- for (i = 0; i < 31; i++)
- state->CTFiltMax[i] = (state->CTFiltMax[i] / 768) * (fcu_osc + 640);
-
- status = MT2063_SoftwareShutdown(state, 1);
- if (status < 0)
- return status;
- status = MT2063_ClearPowerMaskBits(state, MT2063_ALL_SD);
- if (status < 0)
- return status;
-
- state->init = true;
-
- return 0;
-}
-
-static int mt2063_get_status(struct dvb_frontend *fe, u32 *tuner_status)
-{
- struct mt2063_state *state = fe->tuner_priv;
- int status;
-
- dprintk(2, "\n");
-
- if (!state->init)
- return -ENODEV;
-
- *tuner_status = 0;
- status = mt2063_lockStatus(state);
- if (status < 0)
- return status;
- if (status)
- *tuner_status = TUNER_STATUS_LOCKED;
-
- dprintk(1, "Tuner status: %d", *tuner_status);
-
- return 0;
-}
-
-static int mt2063_release(struct dvb_frontend *fe)
-{
- struct mt2063_state *state = fe->tuner_priv;
-
- dprintk(2, "\n");
-
- fe->tuner_priv = NULL;
- kfree(state);
-
- return 0;
-}
-
-static int mt2063_set_analog_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct mt2063_state *state = fe->tuner_priv;
- s32 pict_car;
- s32 pict2chanb_vsb;
- s32 ch_bw;
- s32 if_mid;
- s32 rcvr_mode;
- int status;
-
- dprintk(2, "\n");
-
- if (!state->init) {
- status = mt2063_init(fe);
- if (status < 0)
- return status;
- }
-
- switch (params->mode) {
- case V4L2_TUNER_RADIO:
- pict_car = 38900000;
- ch_bw = 8000000;
- pict2chanb_vsb = -(ch_bw / 2);
- rcvr_mode = MT2063_OFFAIR_ANALOG;
- break;
- case V4L2_TUNER_ANALOG_TV:
- rcvr_mode = MT2063_CABLE_ANALOG;
- if (params->std & ~V4L2_STD_MN) {
- pict_car = 38900000;
- ch_bw = 6000000;
- pict2chanb_vsb = -1250000;
- } else if (params->std & V4L2_STD_PAL_G) {
- pict_car = 38900000;
- ch_bw = 7000000;
- pict2chanb_vsb = -1250000;
- } else { /* PAL/SECAM standards */
- pict_car = 38900000;
- ch_bw = 8000000;
- pict2chanb_vsb = -1250000;
- }
- break;
- default:
- return -EINVAL;
- }
- if_mid = pict_car - (pict2chanb_vsb + (ch_bw / 2));
-
- state->AS_Data.f_LO2_Step = 125000; /* FIXME: probably 5000 for FM */
- state->AS_Data.f_out = if_mid;
- state->AS_Data.f_out_bw = ch_bw + 750000;
- status = MT2063_SetReceiverMode(state, rcvr_mode);
- if (status < 0)
- return status;
-
- dprintk(1, "Tuning to frequency: %d, bandwidth %d, foffset %d\n",
- params->frequency, ch_bw, pict2chanb_vsb);
-
- status = MT2063_Tune(state, (params->frequency + (pict2chanb_vsb + (ch_bw / 2))));
- if (status < 0)
- return status;
-
- state->frequency = params->frequency;
- return 0;
-}
-
-/*
- * As defined on EN 300 429, the DVB-C roll-off factor is 0.15.
- * So, the amount of the needed bandwith is given by:
- * Bw = Symbol_rate * (1 + 0.15)
- * As such, the maximum symbol rate supported by 6 MHz is given by:
- * max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds
- */
-#define MAX_SYMBOL_RATE_6MHz 5217391
-
-static int mt2063_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- struct mt2063_state *state = fe->tuner_priv;
- int status;
- s32 pict_car;
- s32 pict2chanb_vsb;
- s32 ch_bw;
- s32 if_mid;
- s32 rcvr_mode;
-
- if (!state->init) {
- status = mt2063_init(fe);
- if (status < 0)
- return status;
- }
-
- dprintk(2, "\n");
-
- if (c->bandwidth_hz == 0)
- return -EINVAL;
- if (c->bandwidth_hz <= 6000000)
- ch_bw = 6000000;
- else if (c->bandwidth_hz <= 7000000)
- ch_bw = 7000000;
- else
- ch_bw = 8000000;
-
- switch (c->delivery_system) {
- case SYS_DVBT:
- rcvr_mode = MT2063_OFFAIR_COFDM;
- pict_car = 36125000;
- pict2chanb_vsb = -(ch_bw / 2);
- break;
- case SYS_DVBC_ANNEX_A:
- case SYS_DVBC_ANNEX_C:
- rcvr_mode = MT2063_CABLE_QAM;
- pict_car = 36125000;
- pict2chanb_vsb = -(ch_bw / 2);
- break;
- default:
- return -EINVAL;
- }
- if_mid = pict_car - (pict2chanb_vsb + (ch_bw / 2));
-
- state->AS_Data.f_LO2_Step = 125000; /* FIXME: probably 5000 for FM */
- state->AS_Data.f_out = if_mid;
- state->AS_Data.f_out_bw = ch_bw + 750000;
- status = MT2063_SetReceiverMode(state, rcvr_mode);
- if (status < 0)
- return status;
-
- dprintk(1, "Tuning to frequency: %d, bandwidth %d, foffset %d\n",
- c->frequency, ch_bw, pict2chanb_vsb);
-
- status = MT2063_Tune(state, (c->frequency + (pict2chanb_vsb + (ch_bw / 2))));
-
- if (status < 0)
- return status;
-
- state->frequency = c->frequency;
- return 0;
-}
-
-static int mt2063_get_if_frequency(struct dvb_frontend *fe, u32 *freq)
-{
- struct mt2063_state *state = fe->tuner_priv;
-
- dprintk(2, "\n");
-
- if (!state->init)
- return -ENODEV;
-
- *freq = state->AS_Data.f_out;
-
- dprintk(1, "IF frequency: %d\n", *freq);
-
- return 0;
-}
-
-static int mt2063_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
-{
- struct mt2063_state *state = fe->tuner_priv;
-
- dprintk(2, "\n");
-
- if (!state->init)
- return -ENODEV;
-
- *bw = state->AS_Data.f_out_bw - 750000;
-
- dprintk(1, "bandwidth: %d\n", *bw);
-
- return 0;
-}
-
-static struct dvb_tuner_ops mt2063_ops = {
- .info = {
- .name = "MT2063 Silicon Tuner",
- .frequency_min = 45000000,
- .frequency_max = 865000000,
- .frequency_step = 0,
- },
-
- .init = mt2063_init,
- .sleep = MT2063_Sleep,
- .get_status = mt2063_get_status,
- .set_analog_params = mt2063_set_analog_params,
- .set_params = mt2063_set_params,
- .get_if_frequency = mt2063_get_if_frequency,
- .get_bandwidth = mt2063_get_bandwidth,
- .release = mt2063_release,
-};
-
-struct dvb_frontend *mt2063_attach(struct dvb_frontend *fe,
- struct mt2063_config *config,
- struct i2c_adapter *i2c)
-{
- struct mt2063_state *state = NULL;
-
- dprintk(2, "\n");
-
- state = kzalloc(sizeof(struct mt2063_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- state->config = config;
- state->i2c = i2c;
- state->frontend = fe;
- state->reference = config->refclock / 1000; /* kHz */
- fe->tuner_priv = state;
- fe->ops.tuner_ops = mt2063_ops;
-
- printk(KERN_INFO "%s: Attaching MT2063\n", __func__);
- return fe;
-
-error:
- kfree(state);
- return NULL;
-}
-EXPORT_SYMBOL_GPL(mt2063_attach);
-
-/*
- * Ancillary routines visible outside mt2063
- * FIXME: Remove them in favor of using standard tuner callbacks
- */
-unsigned int tuner_MT2063_SoftwareShutdown(struct dvb_frontend *fe)
-{
- struct mt2063_state *state = fe->tuner_priv;
- int err = 0;
-
- dprintk(2, "\n");
-
- err = MT2063_SoftwareShutdown(state, 1);
- if (err < 0)
- printk(KERN_ERR "%s: Couldn't shutdown\n", __func__);
-
- return err;
-}
-EXPORT_SYMBOL_GPL(tuner_MT2063_SoftwareShutdown);
-
-unsigned int tuner_MT2063_ClearPowerMaskBits(struct dvb_frontend *fe)
-{
- struct mt2063_state *state = fe->tuner_priv;
- int err = 0;
-
- dprintk(2, "\n");
-
- err = MT2063_ClearPowerMaskBits(state, MT2063_ALL_SD);
- if (err < 0)
- printk(KERN_ERR "%s: Invalid parameter\n", __func__);
-
- return err;
-}
-EXPORT_SYMBOL_GPL(tuner_MT2063_ClearPowerMaskBits);
-
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_DESCRIPTION("MT2063 Silicon tuner");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/mt2063.h b/drivers/media/common/tuners/mt2063.h
deleted file mode 100644
index 3f5cfd9..0000000
--- a/drivers/media/common/tuners/mt2063.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __MT2063_H__
-#define __MT2063_H__
-
-#include "dvb_frontend.h"
-
-struct mt2063_config {
- u8 tuner_address;
- u32 refclock;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_MT2063) || (defined(CONFIG_MEDIA_TUNER_MT2063_MODULE) && defined(MODULE))
-struct dvb_frontend *mt2063_attach(struct dvb_frontend *fe,
- struct mt2063_config *config,
- struct i2c_adapter *i2c);
-
-#else
-
-static inline struct dvb_frontend *mt2063_attach(struct dvb_frontend *fe,
- struct mt2063_config *config,
- struct i2c_adapter *i2c)
-{
- printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-
-/* FIXME: Should use the standard DVB attachment interfaces */
-unsigned int tuner_MT2063_SoftwareShutdown(struct dvb_frontend *fe);
-unsigned int tuner_MT2063_ClearPowerMaskBits(struct dvb_frontend *fe);
-
-#endif /* CONFIG_DVB_MT2063 */
-
-#endif /* __MT2063_H__ */
diff --git a/drivers/media/common/tuners/mt20xx.c b/drivers/media/common/tuners/mt20xx.c
deleted file mode 100644
index 0e74e97..0000000
--- a/drivers/media/common/tuners/mt20xx.c
+++ /dev/null
@@ -1,670 +0,0 @@
-/*
- * i2c tv tuner chip device driver
- * controls microtune tuners, mt2032 + mt2050 at the moment.
- *
- * This "mt20xx" module was split apart from the original "tuner" module.
- */
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include "tuner-i2c.h"
-#include "mt20xx.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-/* ---------------------------------------------------------------------- */
-
-static unsigned int optimize_vco = 1;
-module_param(optimize_vco, int, 0644);
-
-static unsigned int tv_antenna = 1;
-module_param(tv_antenna, int, 0644);
-
-static unsigned int radio_antenna;
-module_param(radio_antenna, int, 0644);
-
-/* ---------------------------------------------------------------------- */
-
-#define MT2032 0x04
-#define MT2030 0x06
-#define MT2040 0x07
-#define MT2050 0x42
-
-static char *microtune_part[] = {
- [ MT2030 ] = "MT2030",
- [ MT2032 ] = "MT2032",
- [ MT2040 ] = "MT2040",
- [ MT2050 ] = "MT2050",
-};
-
-struct microtune_priv {
- struct tuner_i2c_props i2c_props;
-
- unsigned int xogc;
- //unsigned int radio_if2;
-
- u32 frequency;
-};
-
-static int microtune_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int microtune_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-// IsSpurInBand()?
-static int mt2032_spurcheck(struct dvb_frontend *fe,
- int f1, int f2, int spectrum_from,int spectrum_to)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- int n1=1,n2,f;
-
- f1=f1/1000; //scale to kHz to avoid 32bit overflows
- f2=f2/1000;
- spectrum_from/=1000;
- spectrum_to/=1000;
-
- tuner_dbg("spurcheck f1=%d f2=%d from=%d to=%d\n",
- f1,f2,spectrum_from,spectrum_to);
-
- do {
- n2=-n1;
- f=n1*(f1-f2);
- do {
- n2--;
- f=f-f2;
- tuner_dbg("spurtest n1=%d n2=%d ftest=%d\n",n1,n2,f);
-
- if( (f>spectrum_from) && (f<spectrum_to))
- tuner_dbg("mt2032 spurcheck triggered: %d\n",n1);
- } while ( (f>(f2-spectrum_to)) || (n2>-5));
- n1++;
- } while (n1<5);
-
- return 1;
-}
-
-static int mt2032_compute_freq(struct dvb_frontend *fe,
- unsigned int rfin,
- unsigned int if1, unsigned int if2,
- unsigned int spectrum_from,
- unsigned int spectrum_to,
- unsigned char *buf,
- int *ret_sel,
- unsigned int xogc) //all in Hz
-{
- struct microtune_priv *priv = fe->tuner_priv;
- unsigned int fref,lo1,lo1n,lo1a,s,sel,lo1freq, desired_lo1,
- desired_lo2,lo2,lo2n,lo2a,lo2num,lo2freq;
-
- fref= 5250 *1000; //5.25MHz
- desired_lo1=rfin+if1;
-
- lo1=(2*(desired_lo1/1000)+(fref/1000)) / (2*fref/1000);
- lo1n=lo1/8;
- lo1a=lo1-(lo1n*8);
-
- s=rfin/1000/1000+1090;
-
- if(optimize_vco) {
- if(s>1890) sel=0;
- else if(s>1720) sel=1;
- else if(s>1530) sel=2;
- else if(s>1370) sel=3;
- else sel=4; // >1090
- }
- else {
- if(s>1790) sel=0; // <1958
- else if(s>1617) sel=1;
- else if(s>1449) sel=2;
- else if(s>1291) sel=3;
- else sel=4; // >1090
- }
- *ret_sel=sel;
-
- lo1freq=(lo1a+8*lo1n)*fref;
-
- tuner_dbg("mt2032: rfin=%d lo1=%d lo1n=%d lo1a=%d sel=%d, lo1freq=%d\n",
- rfin,lo1,lo1n,lo1a,sel,lo1freq);
-
- desired_lo2=lo1freq-rfin-if2;
- lo2=(desired_lo2)/fref;
- lo2n=lo2/8;
- lo2a=lo2-(lo2n*8);
- lo2num=((desired_lo2/1000)%(fref/1000))* 3780/(fref/1000); //scale to fit in 32bit arith
- lo2freq=(lo2a+8*lo2n)*fref + lo2num*(fref/1000)/3780*1000;
-
- tuner_dbg("mt2032: rfin=%d lo2=%d lo2n=%d lo2a=%d num=%d lo2freq=%d\n",
- rfin,lo2,lo2n,lo2a,lo2num,lo2freq);
-
- if (lo1a > 7 || lo1n < 17 || lo1n > 48 || lo2a > 7 || lo2n < 17 ||
- lo2n > 30) {
- tuner_info("mt2032: frequency parameters out of range: %d %d %d %d\n",
- lo1a, lo1n, lo2a,lo2n);
- return(-1);
- }
-
- mt2032_spurcheck(fe, lo1freq, desired_lo2, spectrum_from, spectrum_to);
- // should recalculate lo1 (one step up/down)
-
- // set up MT2032 register map for transfer over i2c
- buf[0]=lo1n-1;
- buf[1]=lo1a | (sel<<4);
- buf[2]=0x86; // LOGC
- buf[3]=0x0f; //reserved
- buf[4]=0x1f;
- buf[5]=(lo2n-1) | (lo2a<<5);
- if(rfin >400*1000*1000)
- buf[6]=0xe4;
- else
- buf[6]=0xf4; // set PKEN per rev 1.2
- buf[7]=8+xogc;
- buf[8]=0xc3; //reserved
- buf[9]=0x4e; //reserved
- buf[10]=0xec; //reserved
- buf[11]=(lo2num&0xff);
- buf[12]=(lo2num>>8) |0x80; // Lo2RST
-
- return 0;
-}
-
-static int mt2032_check_lo_lock(struct dvb_frontend *fe)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- int try,lock=0;
- unsigned char buf[2];
-
- for(try=0;try<10;try++) {
- buf[0]=0x0e;
- tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
- tuner_i2c_xfer_recv(&priv->i2c_props,buf,1);
- tuner_dbg("mt2032 Reg.E=0x%02x\n",buf[0]);
- lock=buf[0] &0x06;
-
- if (lock==6)
- break;
-
- tuner_dbg("mt2032: pll wait 1ms for lock (0x%2x)\n",buf[0]);
- udelay(1000);
- }
- return lock;
-}
-
-static int mt2032_optimize_vco(struct dvb_frontend *fe,int sel,int lock)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- unsigned char buf[2];
- int tad1;
-
- buf[0]=0x0f;
- tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
- tuner_i2c_xfer_recv(&priv->i2c_props,buf,1);
- tuner_dbg("mt2032 Reg.F=0x%02x\n",buf[0]);
- tad1=buf[0]&0x07;
-
- if(tad1 ==0) return lock;
- if(tad1 ==1) return lock;
-
- if(tad1==2) {
- if(sel==0)
- return lock;
- else sel--;
- }
- else {
- if(sel<4)
- sel++;
- else
- return lock;
- }
-
- tuner_dbg("mt2032 optimize_vco: sel=%d\n",sel);
-
- buf[0]=0x0f;
- buf[1]=sel;
- tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
- lock=mt2032_check_lo_lock(fe);
- return lock;
-}
-
-
-static void mt2032_set_if_freq(struct dvb_frontend *fe, unsigned int rfin,
- unsigned int if1, unsigned int if2,
- unsigned int from, unsigned int to)
-{
- unsigned char buf[21];
- int lint_try,ret,sel,lock=0;
- struct microtune_priv *priv = fe->tuner_priv;
-
- tuner_dbg("mt2032_set_if_freq rfin=%d if1=%d if2=%d from=%d to=%d\n",
- rfin,if1,if2,from,to);
-
- buf[0]=0;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
- tuner_i2c_xfer_recv(&priv->i2c_props,buf,21);
-
- buf[0]=0;
- ret=mt2032_compute_freq(fe,rfin,if1,if2,from,to,&buf[1],&sel,priv->xogc);
- if (ret<0)
- return;
-
- // send only the relevant registers per Rev. 1.2
- buf[0]=0;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,4);
- buf[5]=5;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+5,4);
- buf[11]=11;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+11,3);
- if(ret!=3)
- tuner_warn("i2c i/o error: rc == %d (should be 3)\n",ret);
-
- // wait for PLLs to lock (per manual), retry LINT if not.
- for(lint_try=0; lint_try<2; lint_try++) {
- lock=mt2032_check_lo_lock(fe);
-
- if(optimize_vco)
- lock=mt2032_optimize_vco(fe,sel,lock);
- if(lock==6) break;
-
- tuner_dbg("mt2032: re-init PLLs by LINT\n");
- buf[0]=7;
- buf[1]=0x80 +8+priv->xogc; // set LINT to re-init PLLs
- tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
- mdelay(10);
- buf[1]=8+priv->xogc;
- tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
- }
-
- if (lock!=6)
- tuner_warn("MT2032 Fatal Error: PLLs didn't lock.\n");
-
- buf[0]=2;
- buf[1]=0x20; // LOGC for optimal phase noise
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
- if (ret!=2)
- tuner_warn("i2c i/o error: rc == %d (should be 2)\n",ret);
-}
-
-
-static int mt2032_set_tv_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- int if2,from,to;
-
- // signal bandwidth and picture carrier
- if (params->std & V4L2_STD_525_60) {
- // NTSC
- from = 40750*1000;
- to = 46750*1000;
- if2 = 45750*1000;
- } else {
- // PAL
- from = 32900*1000;
- to = 39900*1000;
- if2 = 38900*1000;
- }
-
- mt2032_set_if_freq(fe, params->frequency*62500,
- 1090*1000*1000, if2, from, to);
-
- return 0;
-}
-
-static int mt2032_set_radio_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- int if2;
-
- if (params->std & V4L2_STD_525_60) {
- tuner_dbg("pinnacle ntsc\n");
- if2 = 41300 * 1000;
- } else {
- tuner_dbg("pinnacle pal\n");
- if2 = 33300 * 1000;
- }
-
- // per Manual for FM tuning: first if center freq. 1085 MHz
- mt2032_set_if_freq(fe, params->frequency * 125 / 2,
- 1085*1000*1000,if2,if2,if2);
-
- return 0;
-}
-
-static int mt2032_set_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- int ret = -EINVAL;
-
- switch (params->mode) {
- case V4L2_TUNER_RADIO:
- ret = mt2032_set_radio_freq(fe, params);
- priv->frequency = params->frequency * 125 / 2;
- break;
- case V4L2_TUNER_ANALOG_TV:
- case V4L2_TUNER_DIGITAL_TV:
- ret = mt2032_set_tv_freq(fe, params);
- priv->frequency = params->frequency * 62500;
- break;
- }
-
- return ret;
-}
-
-static struct dvb_tuner_ops mt2032_tuner_ops = {
- .set_analog_params = mt2032_set_params,
- .release = microtune_release,
- .get_frequency = microtune_get_frequency,
-};
-
-// Initialization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
-static int mt2032_init(struct dvb_frontend *fe)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- unsigned char buf[21];
- int ret,xogc,xok=0;
-
- // Initialize Registers per spec.
- buf[1]=2; // Index to register 2
- buf[2]=0xff;
- buf[3]=0x0f;
- buf[4]=0x1f;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+1,4);
-
- buf[5]=6; // Index register 6
- buf[6]=0xe4;
- buf[7]=0x8f;
- buf[8]=0xc3;
- buf[9]=0x4e;
- buf[10]=0xec;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+5,6);
-
- buf[12]=13; // Index register 13
- buf[13]=0x32;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf+12,2);
-
- // Adjust XOGC (register 7), wait for XOK
- xogc=7;
- do {
- tuner_dbg("mt2032: xogc = 0x%02x\n",xogc&0x07);
- mdelay(10);
- buf[0]=0x0e;
- tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
- tuner_i2c_xfer_recv(&priv->i2c_props,buf,1);
- xok=buf[0]&0x01;
- tuner_dbg("mt2032: xok = 0x%02x\n",xok);
- if (xok == 1) break;
-
- xogc--;
- tuner_dbg("mt2032: xogc = 0x%02x\n",xogc&0x07);
- if (xogc == 3) {
- xogc=4; // min. 4 per spec
- break;
- }
- buf[0]=0x07;
- buf[1]=0x88 + xogc;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
- if (ret!=2)
- tuner_warn("i2c i/o error: rc == %d (should be 2)\n",ret);
- } while (xok != 1 );
- priv->xogc=xogc;
-
- memcpy(&fe->ops.tuner_ops, &mt2032_tuner_ops, sizeof(struct dvb_tuner_ops));
-
- return(1);
-}
-
-static void mt2050_set_antenna(struct dvb_frontend *fe, unsigned char antenna)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- unsigned char buf[2];
-
- buf[0] = 6;
- buf[1] = antenna ? 0x11 : 0x10;
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
- tuner_dbg("mt2050: enabled antenna connector %d\n", antenna);
-}
-
-static void mt2050_set_if_freq(struct dvb_frontend *fe,unsigned int freq, unsigned int if2)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- unsigned int if1=1218*1000*1000;
- unsigned int f_lo1,f_lo2,lo1,lo2,f_lo1_modulo,f_lo2_modulo,num1,num2,div1a,div1b,div2a,div2b;
- int ret;
- unsigned char buf[6];
-
- tuner_dbg("mt2050_set_if_freq freq=%d if1=%d if2=%d\n",
- freq,if1,if2);
-
- f_lo1=freq+if1;
- f_lo1=(f_lo1/1000000)*1000000;
-
- f_lo2=f_lo1-freq-if2;
- f_lo2=(f_lo2/50000)*50000;
-
- lo1=f_lo1/4000000;
- lo2=f_lo2/4000000;
-
- f_lo1_modulo= f_lo1-(lo1*4000000);
- f_lo2_modulo= f_lo2-(lo2*4000000);
-
- num1=4*f_lo1_modulo/4000000;
- num2=4096*(f_lo2_modulo/1000)/4000;
-
- // todo spurchecks
-
- div1a=(lo1/12)-1;
- div1b=lo1-(div1a+1)*12;
-
- div2a=(lo2/8)-1;
- div2b=lo2-(div2a+1)*8;
-
- if (debug > 1) {
- tuner_dbg("lo1 lo2 = %d %d\n", lo1, lo2);
- tuner_dbg("num1 num2 div1a div1b div2a div2b= %x %x %x %x %x %x\n",
- num1,num2,div1a,div1b,div2a,div2b);
- }
-
- buf[0]=1;
- buf[1]= 4*div1b + num1;
- if(freq<275*1000*1000) buf[1] = buf[1]|0x80;
-
- buf[2]=div1a;
- buf[3]=32*div2b + num2/256;
- buf[4]=num2-(num2/256)*256;
- buf[5]=div2a;
- if(num2!=0) buf[5]=buf[5]|0x40;
-
- if (debug > 1) {
- int i;
- tuner_dbg("bufs is: ");
- for(i=0;i<6;i++)
- printk("%x ",buf[i]);
- printk("\n");
- }
-
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,6);
- if (ret!=6)
- tuner_warn("i2c i/o error: rc == %d (should be 6)\n",ret);
-}
-
-static int mt2050_set_tv_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- unsigned int if2;
-
- if (params->std & V4L2_STD_525_60) {
- // NTSC
- if2 = 45750*1000;
- } else {
- // PAL
- if2 = 38900*1000;
- }
- if (V4L2_TUNER_DIGITAL_TV == params->mode) {
- // DVB (pinnacle 300i)
- if2 = 36150*1000;
- }
- mt2050_set_if_freq(fe, params->frequency*62500, if2);
- mt2050_set_antenna(fe, tv_antenna);
-
- return 0;
-}
-
-static int mt2050_set_radio_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- int if2;
-
- if (params->std & V4L2_STD_525_60) {
- tuner_dbg("pinnacle ntsc\n");
- if2 = 41300 * 1000;
- } else {
- tuner_dbg("pinnacle pal\n");
- if2 = 33300 * 1000;
- }
-
- mt2050_set_if_freq(fe, params->frequency * 125 / 2, if2);
- mt2050_set_antenna(fe, radio_antenna);
-
- return 0;
-}
-
-static int mt2050_set_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- int ret = -EINVAL;
-
- switch (params->mode) {
- case V4L2_TUNER_RADIO:
- ret = mt2050_set_radio_freq(fe, params);
- priv->frequency = params->frequency * 125 / 2;
- break;
- case V4L2_TUNER_ANALOG_TV:
- case V4L2_TUNER_DIGITAL_TV:
- ret = mt2050_set_tv_freq(fe, params);
- priv->frequency = params->frequency * 62500;
- break;
- }
-
- return ret;
-}
-
-static struct dvb_tuner_ops mt2050_tuner_ops = {
- .set_analog_params = mt2050_set_params,
- .release = microtune_release,
- .get_frequency = microtune_get_frequency,
-};
-
-static int mt2050_init(struct dvb_frontend *fe)
-{
- struct microtune_priv *priv = fe->tuner_priv;
- unsigned char buf[2];
-
- buf[0] = 6;
- buf[1] = 0x10;
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 2); /* power */
-
- buf[0] = 0x0f;
- buf[1] = 0x0f;
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 2); /* m1lo */
-
- buf[0] = 0x0d;
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 1);
- tuner_i2c_xfer_recv(&priv->i2c_props, buf, 1);
-
- tuner_dbg("mt2050: sro is %x\n", buf[0]);
-
- memcpy(&fe->ops.tuner_ops, &mt2050_tuner_ops, sizeof(struct dvb_tuner_ops));
-
- return 0;
-}
-
-struct dvb_frontend *microtune_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr)
-{
- struct microtune_priv *priv = NULL;
- char *name;
- unsigned char buf[21];
- int company_code;
-
- priv = kzalloc(sizeof(struct microtune_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
- fe->tuner_priv = priv;
-
- priv->i2c_props.addr = i2c_addr;
- priv->i2c_props.adap = i2c_adap;
- priv->i2c_props.name = "mt20xx";
-
- //priv->radio_if2 = 10700 * 1000; /* 10.7MHz - FM radio */
-
- memset(buf,0,sizeof(buf));
-
- name = "unknown";
-
- tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
- tuner_i2c_xfer_recv(&priv->i2c_props,buf,21);
- if (debug) {
- int i;
- tuner_dbg("MT20xx hexdump:");
- for(i=0;i<21;i++) {
- printk(" %02x",buf[i]);
- if(((i+1)%8)==0) printk(" ");
- }
- printk("\n");
- }
- company_code = buf[0x11] << 8 | buf[0x12];
- tuner_info("microtune: companycode=%04x part=%02x rev=%02x\n",
- company_code,buf[0x13],buf[0x14]);
-
-
- if (buf[0x13] < ARRAY_SIZE(microtune_part) &&
- NULL != microtune_part[buf[0x13]])
- name = microtune_part[buf[0x13]];
- switch (buf[0x13]) {
- case MT2032:
- mt2032_init(fe);
- break;
- case MT2050:
- mt2050_init(fe);
- break;
- default:
- tuner_info("microtune %s found, not (yet?) supported, sorry :-/\n",
- name);
- return NULL;
- }
-
- strlcpy(fe->ops.tuner_ops.info.name, name,
- sizeof(fe->ops.tuner_ops.info.name));
- tuner_info("microtune %s found, OK\n",name);
- return fe;
-}
-
-EXPORT_SYMBOL_GPL(microtune_attach);
-
-MODULE_DESCRIPTION("Microtune tuner driver");
-MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
-MODULE_LICENSE("GPL");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/mt20xx.h b/drivers/media/common/tuners/mt20xx.h
deleted file mode 100644
index 259553a..0000000
--- a/drivers/media/common/tuners/mt20xx.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __MT20XX_H__
-#define __MT20XX_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-#if defined(CONFIG_MEDIA_TUNER_MT20XX) || (defined(CONFIG_MEDIA_TUNER_MT20XX_MODULE) && defined(MODULE))
-extern struct dvb_frontend *microtune_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr);
-#else
-static inline struct dvb_frontend *microtune_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif /* __MT20XX_H__ */
diff --git a/drivers/media/common/tuners/mt2131.c b/drivers/media/common/tuners/mt2131.c
deleted file mode 100644
index f83b0c1..0000000
--- a/drivers/media/common/tuners/mt2131.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
- *
- * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-
-#include "mt2131.h"
-#include "mt2131_priv.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-#define dprintk(level,fmt, arg...) if (debug >= level) \
- printk(KERN_INFO "%s: " fmt, "mt2131", ## arg)
-
-static u8 mt2131_config1[] = {
- 0x01,
- 0x50, 0x00, 0x50, 0x80, 0x00, 0x49, 0xfa, 0x88,
- 0x08, 0x77, 0x41, 0x04, 0x00, 0x00, 0x00, 0x32,
- 0x7f, 0xda, 0x4c, 0x00, 0x10, 0xaa, 0x78, 0x80,
- 0xff, 0x68, 0xa0, 0xff, 0xdd, 0x00, 0x00
-};
-
-static u8 mt2131_config2[] = {
- 0x10,
- 0x7f, 0xc8, 0x0a, 0x5f, 0x00, 0x04
-};
-
-static int mt2131_readreg(struct mt2131_priv *priv, u8 reg, u8 *val)
-{
- struct i2c_msg msg[2] = {
- { .addr = priv->cfg->i2c_address, .flags = 0,
- .buf = ®, .len = 1 },
- { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,
- .buf = val, .len = 1 },
- };
-
- if (i2c_transfer(priv->i2c, msg, 2) != 2) {
- printk(KERN_WARNING "mt2131 I2C read failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int mt2131_writereg(struct mt2131_priv *priv, u8 reg, u8 val)
-{
- u8 buf[2] = { reg, val };
- struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0,
- .buf = buf, .len = 2 };
-
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "mt2131 I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int mt2131_writeregs(struct mt2131_priv *priv,u8 *buf, u8 len)
-{
- struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
- .flags = 0, .buf = buf, .len = len };
-
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n",
- (int)len);
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int mt2131_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- struct mt2131_priv *priv;
- int ret=0, i;
- u32 freq;
- u8 if_band_center;
- u32 f_lo1, f_lo2;
- u32 div1, num1, div2, num2;
- u8 b[8];
- u8 lockval = 0;
-
- priv = fe->tuner_priv;
-
- freq = c->frequency / 1000; /* Hz -> kHz */
- dprintk(1, "%s() freq=%d\n", __func__, freq);
-
- f_lo1 = freq + MT2131_IF1 * 1000;
- f_lo1 = (f_lo1 / 250) * 250;
- f_lo2 = f_lo1 - freq - MT2131_IF2;
-
- priv->frequency = (f_lo1 - f_lo2 - MT2131_IF2) * 1000;
-
- /* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */
- num1 = f_lo1 * 64 / (MT2131_FREF / 128);
- div1 = num1 / 8192;
- num1 &= 0x1fff;
-
- /* Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) */
- num2 = f_lo2 * 64 / (MT2131_FREF / 128);
- div2 = num2 / 8192;
- num2 &= 0x1fff;
-
- if (freq <= 82500) if_band_center = 0x00; else
- if (freq <= 137500) if_band_center = 0x01; else
- if (freq <= 192500) if_band_center = 0x02; else
- if (freq <= 247500) if_band_center = 0x03; else
- if (freq <= 302500) if_band_center = 0x04; else
- if (freq <= 357500) if_band_center = 0x05; else
- if (freq <= 412500) if_band_center = 0x06; else
- if (freq <= 467500) if_band_center = 0x07; else
- if (freq <= 522500) if_band_center = 0x08; else
- if (freq <= 577500) if_band_center = 0x09; else
- if (freq <= 632500) if_band_center = 0x0A; else
- if (freq <= 687500) if_band_center = 0x0B; else
- if (freq <= 742500) if_band_center = 0x0C; else
- if (freq <= 797500) if_band_center = 0x0D; else
- if (freq <= 852500) if_band_center = 0x0E; else
- if (freq <= 907500) if_band_center = 0x0F; else
- if (freq <= 962500) if_band_center = 0x10; else
- if (freq <= 1017500) if_band_center = 0x11; else
- if (freq <= 1072500) if_band_center = 0x12; else if_band_center = 0x13;
-
- b[0] = 1;
- b[1] = (num1 >> 5) & 0xFF;
- b[2] = (num1 & 0x1F);
- b[3] = div1;
- b[4] = (num2 >> 5) & 0xFF;
- b[5] = num2 & 0x1F;
- b[6] = div2;
-
- dprintk(1, "IF1: %dMHz IF2: %dMHz\n", MT2131_IF1, MT2131_IF2);
- dprintk(1, "PLL freq=%dkHz band=%d\n", (int)freq, (int)if_band_center);
- dprintk(1, "PLL f_lo1=%dkHz f_lo2=%dkHz\n", (int)f_lo1, (int)f_lo2);
- dprintk(1, "PLL div1=%d num1=%d div2=%d num2=%d\n",
- (int)div1, (int)num1, (int)div2, (int)num2);
- dprintk(1, "PLL [1..6]: %2x %2x %2x %2x %2x %2x\n",
- (int)b[1], (int)b[2], (int)b[3], (int)b[4], (int)b[5],
- (int)b[6]);
-
- ret = mt2131_writeregs(priv,b,7);
- if (ret < 0)
- return ret;
-
- mt2131_writereg(priv, 0x0b, if_band_center);
-
- /* Wait for lock */
- i = 0;
- do {
- mt2131_readreg(priv, 0x08, &lockval);
- if ((lockval & 0x88) == 0x88)
- break;
- msleep(4);
- i++;
- } while (i < 10);
-
- return ret;
-}
-
-static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct mt2131_priv *priv = fe->tuner_priv;
- dprintk(1, "%s()\n", __func__);
- *frequency = priv->frequency;
- return 0;
-}
-
-static int mt2131_get_status(struct dvb_frontend *fe, u32 *status)
-{
- struct mt2131_priv *priv = fe->tuner_priv;
- u8 lock_status = 0;
- u8 afc_status = 0;
-
- *status = 0;
-
- mt2131_readreg(priv, 0x08, &lock_status);
- if ((lock_status & 0x88) == 0x88)
- *status = TUNER_STATUS_LOCKED;
-
- mt2131_readreg(priv, 0x09, &afc_status);
- dprintk(1, "%s() - LO Status = 0x%x, AFC Status = 0x%x\n",
- __func__, lock_status, afc_status);
-
- return 0;
-}
-
-static int mt2131_init(struct dvb_frontend *fe)
-{
- struct mt2131_priv *priv = fe->tuner_priv;
- int ret;
- dprintk(1, "%s()\n", __func__);
-
- if ((ret = mt2131_writeregs(priv, mt2131_config1,
- sizeof(mt2131_config1))) < 0)
- return ret;
-
- mt2131_writereg(priv, 0x0b, 0x09);
- mt2131_writereg(priv, 0x15, 0x47);
- mt2131_writereg(priv, 0x07, 0xf2);
- mt2131_writereg(priv, 0x0b, 0x01);
-
- if ((ret = mt2131_writeregs(priv, mt2131_config2,
- sizeof(mt2131_config2))) < 0)
- return ret;
-
- return ret;
-}
-
-static int mt2131_release(struct dvb_frontend *fe)
-{
- dprintk(1, "%s()\n", __func__);
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static const struct dvb_tuner_ops mt2131_tuner_ops = {
- .info = {
- .name = "Microtune MT2131",
- .frequency_min = 48000000,
- .frequency_max = 860000000,
- .frequency_step = 50000,
- },
-
- .release = mt2131_release,
- .init = mt2131_init,
-
- .set_params = mt2131_set_params,
- .get_frequency = mt2131_get_frequency,
- .get_status = mt2131_get_status
-};
-
-struct dvb_frontend * mt2131_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct mt2131_config *cfg, u16 if1)
-{
- struct mt2131_priv *priv = NULL;
- u8 id = 0;
-
- dprintk(1, "%s()\n", __func__);
-
- priv = kzalloc(sizeof(struct mt2131_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->cfg = cfg;
- priv->i2c = i2c;
-
- if (mt2131_readreg(priv, 0, &id) != 0) {
- kfree(priv);
- return NULL;
- }
- if ( (id != 0x3E) && (id != 0x3F) ) {
- printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n",
- cfg->i2c_address);
- kfree(priv);
- return NULL;
- }
-
- printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n",
- cfg->i2c_address);
- memcpy(&fe->ops.tuner_ops, &mt2131_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- fe->tuner_priv = priv;
- return fe;
-}
-EXPORT_SYMBOL(mt2131_attach);
-
-MODULE_AUTHOR("Steven Toth");
-MODULE_DESCRIPTION("Microtune MT2131 silicon tuner driver");
-MODULE_LICENSE("GPL");
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/common/tuners/mt2131.h b/drivers/media/common/tuners/mt2131.h
deleted file mode 100644
index 6632de6..0000000
--- a/drivers/media/common/tuners/mt2131.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
- *
- * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MT2131_H__
-#define __MT2131_H__
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-struct mt2131_config {
- u8 i2c_address;
- u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */
-};
-
-#if defined(CONFIG_MEDIA_TUNER_MT2131) || (defined(CONFIG_MEDIA_TUNER_MT2131_MODULE) && defined(MODULE))
-extern struct dvb_frontend* mt2131_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct mt2131_config *cfg,
- u16 if1);
-#else
-static inline struct dvb_frontend* mt2131_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct mt2131_config *cfg,
- u16 if1)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif /* CONFIG_MEDIA_TUNER_MT2131 */
-
-#endif /* __MT2131_H__ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/common/tuners/mt2131_priv.h b/drivers/media/common/tuners/mt2131_priv.h
deleted file mode 100644
index 62aeedf..0000000
--- a/drivers/media/common/tuners/mt2131_priv.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
- *
- * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MT2131_PRIV_H__
-#define __MT2131_PRIV_H__
-
-/* Regs */
-#define MT2131_PWR 0x07
-#define MT2131_UPC_1 0x0b
-#define MT2131_AGC_RL 0x10
-#define MT2131_MISC_2 0x15
-
-/* frequency values in KHz */
-#define MT2131_IF1 1220
-#define MT2131_IF2 44000
-#define MT2131_FREF 16000
-
-struct mt2131_priv {
- struct mt2131_config *cfg;
- struct i2c_adapter *i2c;
-
- u32 frequency;
-};
-
-#endif /* __MT2131_PRIV_H__ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */
diff --git a/drivers/media/common/tuners/mt2266.c b/drivers/media/common/tuners/mt2266.c
deleted file mode 100644
index bca4d75..0000000
--- a/drivers/media/common/tuners/mt2266.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Driver for Microtune MT2266 "Direct conversion low power broadband tuner"
- *
- * Copyright (c) 2007 Olivier DANET <odanet@caramail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "mt2266.h"
-
-#define I2C_ADDRESS 0x60
-
-#define REG_PART_REV 0
-#define REG_TUNE 1
-#define REG_BAND 6
-#define REG_BANDWIDTH 8
-#define REG_LOCK 0x12
-
-#define PART_REV 0x85
-
-struct mt2266_priv {
- struct mt2266_config *cfg;
- struct i2c_adapter *i2c;
-
- u32 frequency;
- u32 bandwidth;
- u8 band;
-};
-
-#define MT2266_VHF 1
-#define MT2266_UHF 0
-
-/* Here, frequencies are expressed in kiloHertz to avoid 32 bits overflows */
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2266: " args); printk("\n"); }} while (0)
-
-// Reads a single register
-static int mt2266_readreg(struct mt2266_priv *priv, u8 reg, u8 *val)
-{
- struct i2c_msg msg[2] = {
- { .addr = priv->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 },
- { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 },
- };
- if (i2c_transfer(priv->i2c, msg, 2) != 2) {
- printk(KERN_WARNING "MT2266 I2C read failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-// Writes a single register
-static int mt2266_writereg(struct mt2266_priv *priv, u8 reg, u8 val)
-{
- u8 buf[2] = { reg, val };
- struct i2c_msg msg = {
- .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
- };
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "MT2266 I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-// Writes a set of consecutive registers
-static int mt2266_writeregs(struct mt2266_priv *priv,u8 *buf, u8 len)
-{
- struct i2c_msg msg = {
- .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = len
- };
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "MT2266 I2C write failed (len=%i)\n",(int)len);
- return -EREMOTEIO;
- }
- return 0;
-}
-
-// Initialisation sequences
-static u8 mt2266_init1[] = { REG_TUNE, 0x00, 0x00, 0x28,
- 0x00, 0x52, 0x99, 0x3f };
-
-static u8 mt2266_init2[] = {
- 0x17, 0x6d, 0x71, 0x61, 0xc0, 0xbf, 0xff, 0xdc, 0x00, 0x0a, 0xd4,
- 0x03, 0x64, 0x64, 0x64, 0x64, 0x22, 0xaa, 0xf2, 0x1e, 0x80, 0x14,
- 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x7f, 0x5e, 0x3f, 0xff, 0xff,
- 0xff, 0x00, 0x77, 0x0f, 0x2d
-};
-
-static u8 mt2266_init_8mhz[] = { REG_BANDWIDTH, 0x22, 0x22, 0x22, 0x22,
- 0x22, 0x22, 0x22, 0x22 };
-
-static u8 mt2266_init_7mhz[] = { REG_BANDWIDTH, 0x32, 0x32, 0x32, 0x32,
- 0x32, 0x32, 0x32, 0x32 };
-
-static u8 mt2266_init_6mhz[] = { REG_BANDWIDTH, 0xa7, 0xa7, 0xa7, 0xa7,
- 0xa7, 0xa7, 0xa7, 0xa7 };
-
-static u8 mt2266_uhf[] = { 0x1d, 0xdc, 0x00, 0x0a, 0xd4, 0x03, 0x64, 0x64,
- 0x64, 0x64, 0x22, 0xaa, 0xf2, 0x1e, 0x80, 0x14 };
-
-static u8 mt2266_vhf[] = { 0x1d, 0xfe, 0x00, 0x00, 0xb4, 0x03, 0xa5, 0xa5,
- 0xa5, 0xa5, 0x82, 0xaa, 0xf1, 0x17, 0x80, 0x1f };
-
-#define FREF 30000 // Quartz oscillator 30 MHz
-
-static int mt2266_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- struct mt2266_priv *priv;
- int ret=0;
- u32 freq;
- u32 tune;
- u8 lnaband;
- u8 b[10];
- int i;
- u8 band;
-
- priv = fe->tuner_priv;
-
- freq = priv->frequency / 1000; /* Hz -> kHz */
- if (freq < 470000 && freq > 230000)
- return -EINVAL; /* Gap between VHF and UHF bands */
-
- priv->frequency = c->frequency;
- tune = 2 * freq * (8192/16) / (FREF/16);
- band = (freq < 300000) ? MT2266_VHF : MT2266_UHF;
- if (band == MT2266_VHF)
- tune *= 2;
-
- switch (c->bandwidth_hz) {
- case 6000000:
- mt2266_writeregs(priv, mt2266_init_6mhz,
- sizeof(mt2266_init_6mhz));
- break;
- case 8000000:
- mt2266_writeregs(priv, mt2266_init_8mhz,
- sizeof(mt2266_init_8mhz));
- break;
- case 7000000:
- default:
- mt2266_writeregs(priv, mt2266_init_7mhz,
- sizeof(mt2266_init_7mhz));
- break;
- }
- priv->bandwidth = c->bandwidth_hz;
-
- if (band == MT2266_VHF && priv->band == MT2266_UHF) {
- dprintk("Switch from UHF to VHF");
- mt2266_writereg(priv, 0x05, 0x04);
- mt2266_writereg(priv, 0x19, 0x61);
- mt2266_writeregs(priv, mt2266_vhf, sizeof(mt2266_vhf));
- } else if (band == MT2266_UHF && priv->band == MT2266_VHF) {
- dprintk("Switch from VHF to UHF");
- mt2266_writereg(priv, 0x05, 0x52);
- mt2266_writereg(priv, 0x19, 0x61);
- mt2266_writeregs(priv, mt2266_uhf, sizeof(mt2266_uhf));
- }
- msleep(10);
-
- if (freq <= 495000)
- lnaband = 0xEE;
- else if (freq <= 525000)
- lnaband = 0xDD;
- else if (freq <= 550000)
- lnaband = 0xCC;
- else if (freq <= 580000)
- lnaband = 0xBB;
- else if (freq <= 605000)
- lnaband = 0xAA;
- else if (freq <= 630000)
- lnaband = 0x99;
- else if (freq <= 655000)
- lnaband = 0x88;
- else if (freq <= 685000)
- lnaband = 0x77;
- else if (freq <= 710000)
- lnaband = 0x66;
- else if (freq <= 735000)
- lnaband = 0x55;
- else if (freq <= 765000)
- lnaband = 0x44;
- else if (freq <= 802000)
- lnaband = 0x33;
- else if (freq <= 840000)
- lnaband = 0x22;
- else
- lnaband = 0x11;
-
- b[0] = REG_TUNE;
- b[1] = (tune >> 8) & 0x1F;
- b[2] = tune & 0xFF;
- b[3] = tune >> 13;
- mt2266_writeregs(priv,b,4);
-
- dprintk("set_parms: tune=%d band=%d %s",
- (int) tune, (int) lnaband,
- (band == MT2266_UHF) ? "UHF" : "VHF");
- dprintk("set_parms: [1..3]: %2x %2x %2x",
- (int) b[1], (int) b[2], (int)b[3]);
-
- if (band == MT2266_UHF) {
- b[0] = 0x05;
- b[1] = (priv->band == MT2266_VHF) ? 0x52 : 0x62;
- b[2] = lnaband;
- mt2266_writeregs(priv, b, 3);
- }
-
- /* Wait for pll lock or timeout */
- i = 0;
- do {
- mt2266_readreg(priv,REG_LOCK,b);
- if (b[0] & 0x40)
- break;
- msleep(10);
- i++;
- } while (i<10);
- dprintk("Lock when i=%i",(int)i);
-
- if (band == MT2266_UHF && priv->band == MT2266_VHF)
- mt2266_writereg(priv, 0x05, 0x62);
-
- priv->band = band;
-
- return ret;
-}
-
-static void mt2266_calibrate(struct mt2266_priv *priv)
-{
- mt2266_writereg(priv, 0x11, 0x03);
- mt2266_writereg(priv, 0x11, 0x01);
- mt2266_writeregs(priv, mt2266_init1, sizeof(mt2266_init1));
- mt2266_writeregs(priv, mt2266_init2, sizeof(mt2266_init2));
- mt2266_writereg(priv, 0x33, 0x5e);
- mt2266_writereg(priv, 0x10, 0x10);
- mt2266_writereg(priv, 0x10, 0x00);
- mt2266_writeregs(priv, mt2266_init_8mhz, sizeof(mt2266_init_8mhz));
- msleep(25);
- mt2266_writereg(priv, 0x17, 0x6d);
- mt2266_writereg(priv, 0x1c, 0x00);
- msleep(75);
- mt2266_writereg(priv, 0x17, 0x6d);
- mt2266_writereg(priv, 0x1c, 0xff);
-}
-
-static int mt2266_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct mt2266_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static int mt2266_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct mt2266_priv *priv = fe->tuner_priv;
- *bandwidth = priv->bandwidth;
- return 0;
-}
-
-static int mt2266_init(struct dvb_frontend *fe)
-{
- int ret;
- struct mt2266_priv *priv = fe->tuner_priv;
- ret = mt2266_writereg(priv, 0x17, 0x6d);
- if (ret < 0)
- return ret;
- ret = mt2266_writereg(priv, 0x1c, 0xff);
- if (ret < 0)
- return ret;
- return 0;
-}
-
-static int mt2266_sleep(struct dvb_frontend *fe)
-{
- struct mt2266_priv *priv = fe->tuner_priv;
- mt2266_writereg(priv, 0x17, 0x6d);
- mt2266_writereg(priv, 0x1c, 0x00);
- return 0;
-}
-
-static int mt2266_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static const struct dvb_tuner_ops mt2266_tuner_ops = {
- .info = {
- .name = "Microtune MT2266",
- .frequency_min = 174000000,
- .frequency_max = 862000000,
- .frequency_step = 50000,
- },
- .release = mt2266_release,
- .init = mt2266_init,
- .sleep = mt2266_sleep,
- .set_params = mt2266_set_params,
- .get_frequency = mt2266_get_frequency,
- .get_bandwidth = mt2266_get_bandwidth
-};
-
-struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg)
-{
- struct mt2266_priv *priv = NULL;
- u8 id = 0;
-
- priv = kzalloc(sizeof(struct mt2266_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->cfg = cfg;
- priv->i2c = i2c;
- priv->band = MT2266_UHF;
-
- if (mt2266_readreg(priv, 0, &id)) {
- kfree(priv);
- return NULL;
- }
- if (id != PART_REV) {
- kfree(priv);
- return NULL;
- }
- printk(KERN_INFO "MT2266: successfully identified\n");
- memcpy(&fe->ops.tuner_ops, &mt2266_tuner_ops, sizeof(struct dvb_tuner_ops));
-
- fe->tuner_priv = priv;
- mt2266_calibrate(priv);
- return fe;
-}
-EXPORT_SYMBOL(mt2266_attach);
-
-MODULE_AUTHOR("Olivier DANET");
-MODULE_DESCRIPTION("Microtune MT2266 silicon tuner driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/mt2266.h b/drivers/media/common/tuners/mt2266.h
deleted file mode 100644
index 4d08388..0000000
--- a/drivers/media/common/tuners/mt2266.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Driver for Microtune MT2266 "Direct conversion low power broadband tuner"
- *
- * Copyright (c) 2007 Olivier DANET <odanet@caramail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef MT2266_H
-#define MT2266_H
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-struct mt2266_config {
- u8 i2c_address;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_MT2266) || (defined(CONFIG_MEDIA_TUNER_MT2266_MODULE) && defined(MODULE))
-extern struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg);
-#else
-static inline struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif // CONFIG_MEDIA_TUNER_MT2266
-
-#endif
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
deleted file mode 100644
index 6133315..0000000
--- a/drivers/media/common/tuners/mxl5005s.c
+++ /dev/null
@@ -1,4109 +0,0 @@
-/*
- MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
-
- Copyright (C) 2008 MaxLinear
- Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
- Functions:
- mxl5005s_reset()
- mxl5005s_writereg()
- mxl5005s_writeregs()
- mxl5005s_init()
- mxl5005s_reconfigure()
- mxl5005s_AssignTunerMode()
- mxl5005s_set_params()
- mxl5005s_get_frequency()
- mxl5005s_get_bandwidth()
- mxl5005s_release()
- mxl5005s_attach()
-
- Copyright (C) 2008 Realtek
- Copyright (C) 2008 Jan Hoogenraad
- Functions:
- mxl5005s_SetRfFreqHz()
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-/*
- History of this driver (Steven Toth):
- I was given a public release of a linux driver that included
- support for the MaxLinear MXL5005S silicon tuner. Analysis of
- the tuner driver showed clearly three things.
-
- 1. The tuner driver didn't support the LinuxTV tuner API
- so the code Realtek added had to be removed.
-
- 2. A significant amount of the driver is reference driver code
- from MaxLinear, I felt it was important to identify and
- preserve this.
-
- 3. New code has to be added to interface correctly with the
- LinuxTV API, as a regular kernel module.
-
- Other than the reference driver enum's, I've clearly marked
- sections of the code and retained the copyright of the
- respective owners.
-*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "dvb_frontend.h"
-#include "mxl5005s.h"
-
-static int debug;
-
-#define dprintk(level, arg...) do { \
- if (level <= debug) \
- printk(arg); \
- } while (0)
-
-#define TUNER_REGS_NUM 104
-#define INITCTRL_NUM 40
-
-#ifdef _MXL_PRODUCTION
-#define CHCTRL_NUM 39
-#else
-#define CHCTRL_NUM 36
-#endif
-
-#define MXLCTRL_NUM 189
-#define MASTER_CONTROL_ADDR 9
-
-/* Enumeration of Master Control Register State */
-enum master_control_state {
- MC_LOAD_START = 1,
- MC_POWER_DOWN,
- MC_SYNTH_RESET,
- MC_SEQ_OFF
-};
-
-/* Enumeration of MXL5005 Tuner Modulation Type */
-enum {
- MXL_DEFAULT_MODULATION = 0,
- MXL_DVBT,
- MXL_ATSC,
- MXL_QAM,
- MXL_ANALOG_CABLE,
- MXL_ANALOG_OTA
-};
-
-/* MXL5005 Tuner Register Struct */
-struct TunerReg {
- u16 Reg_Num; /* Tuner Register Address */
- u16 Reg_Val; /* Current sw programmed value waiting to be written */
-};
-
-enum {
- /* Initialization Control Names */
- DN_IQTN_AMP_CUT = 1, /* 1 */
- BB_MODE, /* 2 */
- BB_BUF, /* 3 */
- BB_BUF_OA, /* 4 */
- BB_ALPF_BANDSELECT, /* 5 */
- BB_IQSWAP, /* 6 */
- BB_DLPF_BANDSEL, /* 7 */
- RFSYN_CHP_GAIN, /* 8 */
- RFSYN_EN_CHP_HIGAIN, /* 9 */
- AGC_IF, /* 10 */
- AGC_RF, /* 11 */
- IF_DIVVAL, /* 12 */
- IF_VCO_BIAS, /* 13 */
- CHCAL_INT_MOD_IF, /* 14 */
- CHCAL_FRAC_MOD_IF, /* 15 */
- DRV_RES_SEL, /* 16 */
- I_DRIVER, /* 17 */
- EN_AAF, /* 18 */
- EN_3P, /* 19 */
- EN_AUX_3P, /* 20 */
- SEL_AAF_BAND, /* 21 */
- SEQ_ENCLK16_CLK_OUT, /* 22 */
- SEQ_SEL4_16B, /* 23 */
- XTAL_CAPSELECT, /* 24 */
- IF_SEL_DBL, /* 25 */
- RFSYN_R_DIV, /* 26 */
- SEQ_EXTSYNTHCALIF, /* 27 */
- SEQ_EXTDCCAL, /* 28 */
- AGC_EN_RSSI, /* 29 */
- RFA_ENCLKRFAGC, /* 30 */
- RFA_RSSI_REFH, /* 31 */
- RFA_RSSI_REF, /* 32 */
- RFA_RSSI_REFL, /* 33 */
- RFA_FLR, /* 34 */
- RFA_CEIL, /* 35 */
- SEQ_EXTIQFSMPULSE, /* 36 */
- OVERRIDE_1, /* 37 */
- BB_INITSTATE_DLPF_TUNE, /* 38 */
- TG_R_DIV, /* 39 */
- EN_CHP_LIN_B, /* 40 */
-
- /* Channel Change Control Names */
- DN_POLY = 51, /* 51 */
- DN_RFGAIN, /* 52 */
- DN_CAP_RFLPF, /* 53 */
- DN_EN_VHFUHFBAR, /* 54 */
- DN_GAIN_ADJUST, /* 55 */
- DN_IQTNBUF_AMP, /* 56 */
- DN_IQTNGNBFBIAS_BST, /* 57 */
- RFSYN_EN_OUTMUX, /* 58 */
- RFSYN_SEL_VCO_OUT, /* 59 */
- RFSYN_SEL_VCO_HI, /* 60 */
- RFSYN_SEL_DIVM, /* 61 */
- RFSYN_RF_DIV_BIAS, /* 62 */
- DN_SEL_FREQ, /* 63 */
- RFSYN_VCO_BIAS, /* 64 */
- CHCAL_INT_MOD_RF, /* 65 */
- CHCAL_FRAC_MOD_RF, /* 66 */
- RFSYN_LPF_R, /* 67 */
- CHCAL_EN_INT_RF, /* 68 */
- TG_LO_DIVVAL, /* 69 */
- TG_LO_SELVAL, /* 70 */
- TG_DIV_VAL, /* 71 */
- TG_VCO_BIAS, /* 72 */
- SEQ_EXTPOWERUP, /* 73 */
- OVERRIDE_2, /* 74 */
- OVERRIDE_3, /* 75 */
- OVERRIDE_4, /* 76 */
- SEQ_FSM_PULSE, /* 77 */
- GPIO_4B, /* 78 */
- GPIO_3B, /* 79 */
- GPIO_4, /* 80 */
- GPIO_3, /* 81 */
- GPIO_1B, /* 82 */
- DAC_A_ENABLE, /* 83 */
- DAC_B_ENABLE, /* 84 */
- DAC_DIN_A, /* 85 */
- DAC_DIN_B, /* 86 */
-#ifdef _MXL_PRODUCTION
- RFSYN_EN_DIV, /* 87 */
- RFSYN_DIVM, /* 88 */
- DN_BYPASS_AGC_I2C /* 89 */
-#endif
-};
-
-/*
- * The following context is source code provided by MaxLinear.
- * MaxLinear source code - Common_MXL.h (?)
- */
-
-/* Constants */
-#define MXL5005S_REG_WRITING_TABLE_LEN_MAX 104
-#define MXL5005S_LATCH_BYTE 0xfe
-
-/* Register address, MSB, and LSB */
-#define MXL5005S_BB_IQSWAP_ADDR 59
-#define MXL5005S_BB_IQSWAP_MSB 0
-#define MXL5005S_BB_IQSWAP_LSB 0
-
-#define MXL5005S_BB_DLPF_BANDSEL_ADDR 53
-#define MXL5005S_BB_DLPF_BANDSEL_MSB 4
-#define MXL5005S_BB_DLPF_BANDSEL_LSB 3
-
-/* Standard modes */
-enum {
- MXL5005S_STANDARD_DVBT,
- MXL5005S_STANDARD_ATSC,
-};
-#define MXL5005S_STANDARD_MODE_NUM 2
-
-/* Bandwidth modes */
-enum {
- MXL5005S_BANDWIDTH_6MHZ = 6000000,
- MXL5005S_BANDWIDTH_7MHZ = 7000000,
- MXL5005S_BANDWIDTH_8MHZ = 8000000,
-};
-#define MXL5005S_BANDWIDTH_MODE_NUM 3
-
-/* MXL5005 Tuner Control Struct */
-struct TunerControl {
- u16 Ctrl_Num; /* Control Number */
- u16 size; /* Number of bits to represent Value */
- u16 addr[25]; /* Array of Tuner Register Address for each bit pos */
- u16 bit[25]; /* Array of bit pos in Reg Addr for each bit pos */
- u16 val[25]; /* Binary representation of Value */
-};
-
-/* MXL5005 Tuner Struct */
-struct mxl5005s_state {
- u8 Mode; /* 0: Analog Mode ; 1: Digital Mode */
- u8 IF_Mode; /* for Analog Mode, 0: zero IF; 1: low IF */
- u32 Chan_Bandwidth; /* filter channel bandwidth (6, 7, 8) */
- u32 IF_OUT; /* Desired IF Out Frequency */
- u16 IF_OUT_LOAD; /* IF Out Load Resistor (200/300 Ohms) */
- u32 RF_IN; /* RF Input Frequency */
- u32 Fxtal; /* XTAL Frequency */
- u8 AGC_Mode; /* AGC Mode 0: Dual AGC; 1: Single AGC */
- u16 TOP; /* Value: take over point */
- u8 CLOCK_OUT; /* 0: turn off clk out; 1: turn on clock out */
- u8 DIV_OUT; /* 4MHz or 16MHz */
- u8 CAPSELECT; /* 0: disable On-Chip pulling cap; 1: enable */
- u8 EN_RSSI; /* 0: disable RSSI; 1: enable RSSI */
-
- /* Modulation Type; */
- /* 0 - Default; 1 - DVB-T; 2 - ATSC; 3 - QAM; 4 - Analog Cable */
- u8 Mod_Type;
-
- /* Tracking Filter Type */
- /* 0 - Default; 1 - Off; 2 - Type C; 3 - Type C-H */
- u8 TF_Type;
-
- /* Calculated Settings */
- u32 RF_LO; /* Synth RF LO Frequency */
- u32 IF_LO; /* Synth IF LO Frequency */
- u32 TG_LO; /* Synth TG_LO Frequency */
-
- /* Pointers to ControlName Arrays */
- u16 Init_Ctrl_Num; /* Number of INIT Control Names */
- struct TunerControl
- Init_Ctrl[INITCTRL_NUM]; /* INIT Control Names Array Pointer */
-
- u16 CH_Ctrl_Num; /* Number of CH Control Names */
- struct TunerControl
- CH_Ctrl[CHCTRL_NUM]; /* CH Control Name Array Pointer */
-
- u16 MXL_Ctrl_Num; /* Number of MXL Control Names */
- struct TunerControl
- MXL_Ctrl[MXLCTRL_NUM]; /* MXL Control Name Array Pointer */
-
- /* Pointer to Tuner Register Array */
- u16 TunerRegs_Num; /* Number of Tuner Registers */
- struct TunerReg
- TunerRegs[TUNER_REGS_NUM]; /* Tuner Register Array Pointer */
-
- /* Linux driver framework specific */
- struct mxl5005s_config *config;
- struct dvb_frontend *frontend;
- struct i2c_adapter *i2c;
-
- /* Cache values */
- u32 current_mode;
-
-};
-
-static u16 MXL_GetMasterControl(u8 *MasterReg, int state);
-static u16 MXL_ControlWrite(struct dvb_frontend *fe, u16 ControlNum, u32 value);
-static u16 MXL_ControlRead(struct dvb_frontend *fe, u16 controlNum, u32 *value);
-static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit,
- u8 bitVal);
-static u16 MXL_GetCHRegister(struct dvb_frontend *fe, u8 *RegNum,
- u8 *RegVal, int *count);
-static u32 MXL_Ceiling(u32 value, u32 resolution);
-static u16 MXL_RegRead(struct dvb_frontend *fe, u8 RegNum, u8 *RegVal);
-static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum,
- u32 value, u16 controlGroup);
-static u16 MXL_SetGPIO(struct dvb_frontend *fe, u8 GPIO_Num, u8 GPIO_Val);
-static u16 MXL_GetInitRegister(struct dvb_frontend *fe, u8 *RegNum,
- u8 *RegVal, int *count);
-static u16 MXL_TuneRF(struct dvb_frontend *fe, u32 RF_Freq);
-static void MXL_SynthIFLO_Calc(struct dvb_frontend *fe);
-static void MXL_SynthRFTGLO_Calc(struct dvb_frontend *fe);
-static u16 MXL_GetCHRegister_ZeroIF(struct dvb_frontend *fe, u8 *RegNum,
- u8 *RegVal, int *count);
-static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable,
- u8 *datatable, u8 len);
-static u16 MXL_IFSynthInit(struct dvb_frontend *fe);
-static int mxl5005s_AssignTunerMode(struct dvb_frontend *fe, u32 mod_type,
- u32 bandwidth);
-static int mxl5005s_reconfigure(struct dvb_frontend *fe, u32 mod_type,
- u32 bandwidth);
-
-/* ----------------------------------------------------------------
- * Begin: Custom code salvaged from the Realtek driver.
- * Copyright (C) 2008 Realtek
- * Copyright (C) 2008 Jan Hoogenraad
- * This code is placed under the terms of the GNU General Public License
- *
- * Released by Realtek under GPLv2.
- * Thanks to Realtek for a lot of support we received !
- *
- * Revision: 080314 - original version
- */
-
-static int mxl5005s_SetRfFreqHz(struct dvb_frontend *fe, unsigned long RfFreqHz)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- unsigned char AddrTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX];
- unsigned char ByteTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX];
- int TableLen;
-
- u32 IfDivval = 0;
- unsigned char MasterControlByte;
-
- dprintk(1, "%s() freq=%ld\n", __func__, RfFreqHz);
-
- /* Set MxL5005S tuner RF frequency according to example code. */
-
- /* Tuner RF frequency setting stage 0 */
- MXL_GetMasterControl(ByteTable, MC_SYNTH_RESET);
- AddrTable[0] = MASTER_CONTROL_ADDR;
- ByteTable[0] |= state->config->AgcMasterByte;
-
- mxl5005s_writeregs(fe, AddrTable, ByteTable, 1);
-
- /* Tuner RF frequency setting stage 1 */
- MXL_TuneRF(fe, RfFreqHz);
-
- MXL_ControlRead(fe, IF_DIVVAL, &IfDivval);
-
- MXL_ControlWrite(fe, SEQ_FSM_PULSE, 0);
- MXL_ControlWrite(fe, SEQ_EXTPOWERUP, 1);
- MXL_ControlWrite(fe, IF_DIVVAL, 8);
- MXL_GetCHRegister(fe, AddrTable, ByteTable, &TableLen);
-
- MXL_GetMasterControl(&MasterControlByte, MC_LOAD_START);
- AddrTable[TableLen] = MASTER_CONTROL_ADDR ;
- ByteTable[TableLen] = MasterControlByte |
- state->config->AgcMasterByte;
- TableLen += 1;
-
- mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen);
-
- /* Wait 30 ms. */
- msleep(150);
-
- /* Tuner RF frequency setting stage 2 */
- MXL_ControlWrite(fe, SEQ_FSM_PULSE, 1);
- MXL_ControlWrite(fe, IF_DIVVAL, IfDivval);
- MXL_GetCHRegister_ZeroIF(fe, AddrTable, ByteTable, &TableLen);
-
- MXL_GetMasterControl(&MasterControlByte, MC_LOAD_START);
- AddrTable[TableLen] = MASTER_CONTROL_ADDR ;
- ByteTable[TableLen] = MasterControlByte |
- state->config->AgcMasterByte ;
- TableLen += 1;
-
- mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen);
-
- msleep(100);
-
- return 0;
-}
-/* End: Custom code taken from the Realtek driver */
-
-/* ----------------------------------------------------------------
- * Begin: Reference driver code found in the Realtek driver.
- * Copyright (C) 2008 MaxLinear
- */
-static u16 MXL5005_RegisterInit(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- state->TunerRegs_Num = TUNER_REGS_NUM ;
-
- state->TunerRegs[0].Reg_Num = 9 ;
- state->TunerRegs[0].Reg_Val = 0x40 ;
-
- state->TunerRegs[1].Reg_Num = 11 ;
- state->TunerRegs[1].Reg_Val = 0x19 ;
-
- state->TunerRegs[2].Reg_Num = 12 ;
- state->TunerRegs[2].Reg_Val = 0x60 ;
-
- state->TunerRegs[3].Reg_Num = 13 ;
- state->TunerRegs[3].Reg_Val = 0x00 ;
-
- state->TunerRegs[4].Reg_Num = 14 ;
- state->TunerRegs[4].Reg_Val = 0x00 ;
-
- state->TunerRegs[5].Reg_Num = 15 ;
- state->TunerRegs[5].Reg_Val = 0xC0 ;
-
- state->TunerRegs[6].Reg_Num = 16 ;
- state->TunerRegs[6].Reg_Val = 0x00 ;
-
- state->TunerRegs[7].Reg_Num = 17 ;
- state->TunerRegs[7].Reg_Val = 0x00 ;
-
- state->TunerRegs[8].Reg_Num = 18 ;
- state->TunerRegs[8].Reg_Val = 0x00 ;
-
- state->TunerRegs[9].Reg_Num = 19 ;
- state->TunerRegs[9].Reg_Val = 0x34 ;
-
- state->TunerRegs[10].Reg_Num = 21 ;
- state->TunerRegs[10].Reg_Val = 0x00 ;
-
- state->TunerRegs[11].Reg_Num = 22 ;
- state->TunerRegs[11].Reg_Val = 0x6B ;
-
- state->TunerRegs[12].Reg_Num = 23 ;
- state->TunerRegs[12].Reg_Val = 0x35 ;
-
- state->TunerRegs[13].Reg_Num = 24 ;
- state->TunerRegs[13].Reg_Val = 0x70 ;
-
- state->TunerRegs[14].Reg_Num = 25 ;
- state->TunerRegs[14].Reg_Val = 0x3E ;
-
- state->TunerRegs[15].Reg_Num = 26 ;
- state->TunerRegs[15].Reg_Val = 0x82 ;
-
- state->TunerRegs[16].Reg_Num = 31 ;
- state->TunerRegs[16].Reg_Val = 0x00 ;
-
- state->TunerRegs[17].Reg_Num = 32 ;
- state->TunerRegs[17].Reg_Val = 0x40 ;
-
- state->TunerRegs[18].Reg_Num = 33 ;
- state->TunerRegs[18].Reg_Val = 0x53 ;
-
- state->TunerRegs[19].Reg_Num = 34 ;
- state->TunerRegs[19].Reg_Val = 0x81 ;
-
- state->TunerRegs[20].Reg_Num = 35 ;
- state->TunerRegs[20].Reg_Val = 0xC9 ;
-
- state->TunerRegs[21].Reg_Num = 36 ;
- state->TunerRegs[21].Reg_Val = 0x01 ;
-
- state->TunerRegs[22].Reg_Num = 37 ;
- state->TunerRegs[22].Reg_Val = 0x00 ;
-
- state->TunerRegs[23].Reg_Num = 41 ;
- state->TunerRegs[23].Reg_Val = 0x00 ;
-
- state->TunerRegs[24].Reg_Num = 42 ;
- state->TunerRegs[24].Reg_Val = 0xF8 ;
-
- state->TunerRegs[25].Reg_Num = 43 ;
- state->TunerRegs[25].Reg_Val = 0x43 ;
-
- state->TunerRegs[26].Reg_Num = 44 ;
- state->TunerRegs[26].Reg_Val = 0x20 ;
-
- state->TunerRegs[27].Reg_Num = 45 ;
- state->TunerRegs[27].Reg_Val = 0x80 ;
-
- state->TunerRegs[28].Reg_Num = 46 ;
- state->TunerRegs[28].Reg_Val = 0x88 ;
-
- state->TunerRegs[29].Reg_Num = 47 ;
- state->TunerRegs[29].Reg_Val = 0x86 ;
-
- state->TunerRegs[30].Reg_Num = 48 ;
- state->TunerRegs[30].Reg_Val = 0x00 ;
-
- state->TunerRegs[31].Reg_Num = 49 ;
- state->TunerRegs[31].Reg_Val = 0x00 ;
-
- state->TunerRegs[32].Reg_Num = 53 ;
- state->TunerRegs[32].Reg_Val = 0x94 ;
-
- state->TunerRegs[33].Reg_Num = 54 ;
- state->TunerRegs[33].Reg_Val = 0xFA ;
-
- state->TunerRegs[34].Reg_Num = 55 ;
- state->TunerRegs[34].Reg_Val = 0x92 ;
-
- state->TunerRegs[35].Reg_Num = 56 ;
- state->TunerRegs[35].Reg_Val = 0x80 ;
-
- state->TunerRegs[36].Reg_Num = 57 ;
- state->TunerRegs[36].Reg_Val = 0x41 ;
-
- state->TunerRegs[37].Reg_Num = 58 ;
- state->TunerRegs[37].Reg_Val = 0xDB ;
-
- state->TunerRegs[38].Reg_Num = 59 ;
- state->TunerRegs[38].Reg_Val = 0x00 ;
-
- state->TunerRegs[39].Reg_Num = 60 ;
- state->TunerRegs[39].Reg_Val = 0x00 ;
-
- state->TunerRegs[40].Reg_Num = 61 ;
- state->TunerRegs[40].Reg_Val = 0x00 ;
-
- state->TunerRegs[41].Reg_Num = 62 ;
- state->TunerRegs[41].Reg_Val = 0x00 ;
-
- state->TunerRegs[42].Reg_Num = 65 ;
- state->TunerRegs[42].Reg_Val = 0xF8 ;
-
- state->TunerRegs[43].Reg_Num = 66 ;
- state->TunerRegs[43].Reg_Val = 0xE4 ;
-
- state->TunerRegs[44].Reg_Num = 67 ;
- state->TunerRegs[44].Reg_Val = 0x90 ;
-
- state->TunerRegs[45].Reg_Num = 68 ;
- state->TunerRegs[45].Reg_Val = 0xC0 ;
-
- state->TunerRegs[46].Reg_Num = 69 ;
- state->TunerRegs[46].Reg_Val = 0x01 ;
-
- state->TunerRegs[47].Reg_Num = 70 ;
- state->TunerRegs[47].Reg_Val = 0x50 ;
-
- state->TunerRegs[48].Reg_Num = 71 ;
- state->TunerRegs[48].Reg_Val = 0x06 ;
-
- state->TunerRegs[49].Reg_Num = 72 ;
- state->TunerRegs[49].Reg_Val = 0x00 ;
-
- state->TunerRegs[50].Reg_Num = 73 ;
- state->TunerRegs[50].Reg_Val = 0x20 ;
-
- state->TunerRegs[51].Reg_Num = 76 ;
- state->TunerRegs[51].Reg_Val = 0xBB ;
-
- state->TunerRegs[52].Reg_Num = 77 ;
- state->TunerRegs[52].Reg_Val = 0x13 ;
-
- state->TunerRegs[53].Reg_Num = 81 ;
- state->TunerRegs[53].Reg_Val = 0x04 ;
-
- state->TunerRegs[54].Reg_Num = 82 ;
- state->TunerRegs[54].Reg_Val = 0x75 ;
-
- state->TunerRegs[55].Reg_Num = 83 ;
- state->TunerRegs[55].Reg_Val = 0x00 ;
-
- state->TunerRegs[56].Reg_Num = 84 ;
- state->TunerRegs[56].Reg_Val = 0x00 ;
-
- state->TunerRegs[57].Reg_Num = 85 ;
- state->TunerRegs[57].Reg_Val = 0x00 ;
-
- state->TunerRegs[58].Reg_Num = 91 ;
- state->TunerRegs[58].Reg_Val = 0x70 ;
-
- state->TunerRegs[59].Reg_Num = 92 ;
- state->TunerRegs[59].Reg_Val = 0x00 ;
-
- state->TunerRegs[60].Reg_Num = 93 ;
- state->TunerRegs[60].Reg_Val = 0x00 ;
-
- state->TunerRegs[61].Reg_Num = 94 ;
- state->TunerRegs[61].Reg_Val = 0x00 ;
-
- state->TunerRegs[62].Reg_Num = 95 ;
- state->TunerRegs[62].Reg_Val = 0x0C ;
-
- state->TunerRegs[63].Reg_Num = 96 ;
- state->TunerRegs[63].Reg_Val = 0x00 ;
-
- state->TunerRegs[64].Reg_Num = 97 ;
- state->TunerRegs[64].Reg_Val = 0x00 ;
-
- state->TunerRegs[65].Reg_Num = 98 ;
- state->TunerRegs[65].Reg_Val = 0xE2 ;
-
- state->TunerRegs[66].Reg_Num = 99 ;
- state->TunerRegs[66].Reg_Val = 0x00 ;
-
- state->TunerRegs[67].Reg_Num = 100 ;
- state->TunerRegs[67].Reg_Val = 0x00 ;
-
- state->TunerRegs[68].Reg_Num = 101 ;
- state->TunerRegs[68].Reg_Val = 0x12 ;
-
- state->TunerRegs[69].Reg_Num = 102 ;
- state->TunerRegs[69].Reg_Val = 0x80 ;
-
- state->TunerRegs[70].Reg_Num = 103 ;
- state->TunerRegs[70].Reg_Val = 0x32 ;
-
- state->TunerRegs[71].Reg_Num = 104 ;
- state->TunerRegs[71].Reg_Val = 0xB4 ;
-
- state->TunerRegs[72].Reg_Num = 105 ;
- state->TunerRegs[72].Reg_Val = 0x60 ;
-
- state->TunerRegs[73].Reg_Num = 106 ;
- state->TunerRegs[73].Reg_Val = 0x83 ;
-
- state->TunerRegs[74].Reg_Num = 107 ;
- state->TunerRegs[74].Reg_Val = 0x84 ;
-
- state->TunerRegs[75].Reg_Num = 108 ;
- state->TunerRegs[75].Reg_Val = 0x9C ;
-
- state->TunerRegs[76].Reg_Num = 109 ;
- state->TunerRegs[76].Reg_Val = 0x02 ;
-
- state->TunerRegs[77].Reg_Num = 110 ;
- state->TunerRegs[77].Reg_Val = 0x81 ;
-
- state->TunerRegs[78].Reg_Num = 111 ;
- state->TunerRegs[78].Reg_Val = 0xC0 ;
-
- state->TunerRegs[79].Reg_Num = 112 ;
- state->TunerRegs[79].Reg_Val = 0x10 ;
-
- state->TunerRegs[80].Reg_Num = 131 ;
- state->TunerRegs[80].Reg_Val = 0x8A ;
-
- state->TunerRegs[81].Reg_Num = 132 ;
- state->TunerRegs[81].Reg_Val = 0x10 ;
-
- state->TunerRegs[82].Reg_Num = 133 ;
- state->TunerRegs[82].Reg_Val = 0x24 ;
-
- state->TunerRegs[83].Reg_Num = 134 ;
- state->TunerRegs[83].Reg_Val = 0x00 ;
-
- state->TunerRegs[84].Reg_Num = 135 ;
- state->TunerRegs[84].Reg_Val = 0x00 ;
-
- state->TunerRegs[85].Reg_Num = 136 ;
- state->TunerRegs[85].Reg_Val = 0x7E ;
-
- state->TunerRegs[86].Reg_Num = 137 ;
- state->TunerRegs[86].Reg_Val = 0x40 ;
-
- state->TunerRegs[87].Reg_Num = 138 ;
- state->TunerRegs[87].Reg_Val = 0x38 ;
-
- state->TunerRegs[88].Reg_Num = 146 ;
- state->TunerRegs[88].Reg_Val = 0xF6 ;
-
- state->TunerRegs[89].Reg_Num = 147 ;
- state->TunerRegs[89].Reg_Val = 0x1A ;
-
- state->TunerRegs[90].Reg_Num = 148 ;
- state->TunerRegs[90].Reg_Val = 0x62 ;
-
- state->TunerRegs[91].Reg_Num = 149 ;
- state->TunerRegs[91].Reg_Val = 0x33 ;
-
- state->TunerRegs[92].Reg_Num = 150 ;
- state->TunerRegs[92].Reg_Val = 0x80 ;
-
- state->TunerRegs[93].Reg_Num = 156 ;
- state->TunerRegs[93].Reg_Val = 0x56 ;
-
- state->TunerRegs[94].Reg_Num = 157 ;
- state->TunerRegs[94].Reg_Val = 0x17 ;
-
- state->TunerRegs[95].Reg_Num = 158 ;
- state->TunerRegs[95].Reg_Val = 0xA9 ;
-
- state->TunerRegs[96].Reg_Num = 159 ;
- state->TunerRegs[96].Reg_Val = 0x00 ;
-
- state->TunerRegs[97].Reg_Num = 160 ;
- state->TunerRegs[97].Reg_Val = 0x00 ;
-
- state->TunerRegs[98].Reg_Num = 161 ;
- state->TunerRegs[98].Reg_Val = 0x00 ;
-
- state->TunerRegs[99].Reg_Num = 162 ;
- state->TunerRegs[99].Reg_Val = 0x40 ;
-
- state->TunerRegs[100].Reg_Num = 166 ;
- state->TunerRegs[100].Reg_Val = 0xAE ;
-
- state->TunerRegs[101].Reg_Num = 167 ;
- state->TunerRegs[101].Reg_Val = 0x1B ;
-
- state->TunerRegs[102].Reg_Num = 168 ;
- state->TunerRegs[102].Reg_Val = 0xF2 ;
-
- state->TunerRegs[103].Reg_Num = 195 ;
- state->TunerRegs[103].Reg_Val = 0x00 ;
-
- return 0 ;
-}
-
-static u16 MXL5005_ControlInit(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- state->Init_Ctrl_Num = INITCTRL_NUM;
-
- state->Init_Ctrl[0].Ctrl_Num = DN_IQTN_AMP_CUT ;
- state->Init_Ctrl[0].size = 1 ;
- state->Init_Ctrl[0].addr[0] = 73;
- state->Init_Ctrl[0].bit[0] = 7;
- state->Init_Ctrl[0].val[0] = 0;
-
- state->Init_Ctrl[1].Ctrl_Num = BB_MODE ;
- state->Init_Ctrl[1].size = 1 ;
- state->Init_Ctrl[1].addr[0] = 53;
- state->Init_Ctrl[1].bit[0] = 2;
- state->Init_Ctrl[1].val[0] = 1;
-
- state->Init_Ctrl[2].Ctrl_Num = BB_BUF ;
- state->Init_Ctrl[2].size = 2 ;
- state->Init_Ctrl[2].addr[0] = 53;
- state->Init_Ctrl[2].bit[0] = 1;
- state->Init_Ctrl[2].val[0] = 0;
- state->Init_Ctrl[2].addr[1] = 57;
- state->Init_Ctrl[2].bit[1] = 0;
- state->Init_Ctrl[2].val[1] = 1;
-
- state->Init_Ctrl[3].Ctrl_Num = BB_BUF_OA ;
- state->Init_Ctrl[3].size = 1 ;
- state->Init_Ctrl[3].addr[0] = 53;
- state->Init_Ctrl[3].bit[0] = 0;
- state->Init_Ctrl[3].val[0] = 0;
-
- state->Init_Ctrl[4].Ctrl_Num = BB_ALPF_BANDSELECT ;
- state->Init_Ctrl[4].size = 3 ;
- state->Init_Ctrl[4].addr[0] = 53;
- state->Init_Ctrl[4].bit[0] = 5;
- state->Init_Ctrl[4].val[0] = 0;
- state->Init_Ctrl[4].addr[1] = 53;
- state->Init_Ctrl[4].bit[1] = 6;
- state->Init_Ctrl[4].val[1] = 0;
- state->Init_Ctrl[4].addr[2] = 53;
- state->Init_Ctrl[4].bit[2] = 7;
- state->Init_Ctrl[4].val[2] = 1;
-
- state->Init_Ctrl[5].Ctrl_Num = BB_IQSWAP ;
- state->Init_Ctrl[5].size = 1 ;
- state->Init_Ctrl[5].addr[0] = 59;
- state->Init_Ctrl[5].bit[0] = 0;
- state->Init_Ctrl[5].val[0] = 0;
-
- state->Init_Ctrl[6].Ctrl_Num = BB_DLPF_BANDSEL ;
- state->Init_Ctrl[6].size = 2 ;
- state->Init_Ctrl[6].addr[0] = 53;
- state->Init_Ctrl[6].bit[0] = 3;
- state->Init_Ctrl[6].val[0] = 0;
- state->Init_Ctrl[6].addr[1] = 53;
- state->Init_Ctrl[6].bit[1] = 4;
- state->Init_Ctrl[6].val[1] = 1;
-
- state->Init_Ctrl[7].Ctrl_Num = RFSYN_CHP_GAIN ;
- state->Init_Ctrl[7].size = 4 ;
- state->Init_Ctrl[7].addr[0] = 22;
- state->Init_Ctrl[7].bit[0] = 4;
- state->Init_Ctrl[7].val[0] = 0;
- state->Init_Ctrl[7].addr[1] = 22;
- state->Init_Ctrl[7].bit[1] = 5;
- state->Init_Ctrl[7].val[1] = 1;
- state->Init_Ctrl[7].addr[2] = 22;
- state->Init_Ctrl[7].bit[2] = 6;
- state->Init_Ctrl[7].val[2] = 1;
- state->Init_Ctrl[7].addr[3] = 22;
- state->Init_Ctrl[7].bit[3] = 7;
- state->Init_Ctrl[7].val[3] = 0;
-
- state->Init_Ctrl[8].Ctrl_Num = RFSYN_EN_CHP_HIGAIN ;
- state->Init_Ctrl[8].size = 1 ;
- state->Init_Ctrl[8].addr[0] = 22;
- state->Init_Ctrl[8].bit[0] = 2;
- state->Init_Ctrl[8].val[0] = 0;
-
- state->Init_Ctrl[9].Ctrl_Num = AGC_IF ;
- state->Init_Ctrl[9].size = 4 ;
- state->Init_Ctrl[9].addr[0] = 76;
- state->Init_Ctrl[9].bit[0] = 0;
- state->Init_Ctrl[9].val[0] = 1;
- state->Init_Ctrl[9].addr[1] = 76;
- state->Init_Ctrl[9].bit[1] = 1;
- state->Init_Ctrl[9].val[1] = 1;
- state->Init_Ctrl[9].addr[2] = 76;
- state->Init_Ctrl[9].bit[2] = 2;
- state->Init_Ctrl[9].val[2] = 0;
- state->Init_Ctrl[9].addr[3] = 76;
- state->Init_Ctrl[9].bit[3] = 3;
- state->Init_Ctrl[9].val[3] = 1;
-
- state->Init_Ctrl[10].Ctrl_Num = AGC_RF ;
- state->Init_Ctrl[10].size = 4 ;
- state->Init_Ctrl[10].addr[0] = 76;
- state->Init_Ctrl[10].bit[0] = 4;
- state->Init_Ctrl[10].val[0] = 1;
- state->Init_Ctrl[10].addr[1] = 76;
- state->Init_Ctrl[10].bit[1] = 5;
- state->Init_Ctrl[10].val[1] = 1;
- state->Init_Ctrl[10].addr[2] = 76;
- state->Init_Ctrl[10].bit[2] = 6;
- state->Init_Ctrl[10].val[2] = 0;
- state->Init_Ctrl[10].addr[3] = 76;
- state->Init_Ctrl[10].bit[3] = 7;
- state->Init_Ctrl[10].val[3] = 1;
-
- state->Init_Ctrl[11].Ctrl_Num = IF_DIVVAL ;
- state->Init_Ctrl[11].size = 5 ;
- state->Init_Ctrl[11].addr[0] = 43;
- state->Init_Ctrl[11].bit[0] = 3;
- state->Init_Ctrl[11].val[0] = 0;
- state->Init_Ctrl[11].addr[1] = 43;
- state->Init_Ctrl[11].bit[1] = 4;
- state->Init_Ctrl[11].val[1] = 0;
- state->Init_Ctrl[11].addr[2] = 43;
- state->Init_Ctrl[11].bit[2] = 5;
- state->Init_Ctrl[11].val[2] = 0;
- state->Init_Ctrl[11].addr[3] = 43;
- state->Init_Ctrl[11].bit[3] = 6;
- state->Init_Ctrl[11].val[3] = 1;
- state->Init_Ctrl[11].addr[4] = 43;
- state->Init_Ctrl[11].bit[4] = 7;
- state->Init_Ctrl[11].val[4] = 0;
-
- state->Init_Ctrl[12].Ctrl_Num = IF_VCO_BIAS ;
- state->Init_Ctrl[12].size = 6 ;
- state->Init_Ctrl[12].addr[0] = 44;
- state->Init_Ctrl[12].bit[0] = 2;
- state->Init_Ctrl[12].val[0] = 0;
- state->Init_Ctrl[12].addr[1] = 44;
- state->Init_Ctrl[12].bit[1] = 3;
- state->Init_Ctrl[12].val[1] = 0;
- state->Init_Ctrl[12].addr[2] = 44;
- state->Init_Ctrl[12].bit[2] = 4;
- state->Init_Ctrl[12].val[2] = 0;
- state->Init_Ctrl[12].addr[3] = 44;
- state->Init_Ctrl[12].bit[3] = 5;
- state->Init_Ctrl[12].val[3] = 1;
- state->Init_Ctrl[12].addr[4] = 44;
- state->Init_Ctrl[12].bit[4] = 6;
- state->Init_Ctrl[12].val[4] = 0;
- state->Init_Ctrl[12].addr[5] = 44;
- state->Init_Ctrl[12].bit[5] = 7;
- state->Init_Ctrl[12].val[5] = 0;
-
- state->Init_Ctrl[13].Ctrl_Num = CHCAL_INT_MOD_IF ;
- state->Init_Ctrl[13].size = 7 ;
- state->Init_Ctrl[13].addr[0] = 11;
- state->Init_Ctrl[13].bit[0] = 0;
- state->Init_Ctrl[13].val[0] = 1;
- state->Init_Ctrl[13].addr[1] = 11;
- state->Init_Ctrl[13].bit[1] = 1;
- state->Init_Ctrl[13].val[1] = 0;
- state->Init_Ctrl[13].addr[2] = 11;
- state->Init_Ctrl[13].bit[2] = 2;
- state->Init_Ctrl[13].val[2] = 0;
- state->Init_Ctrl[13].addr[3] = 11;
- state->Init_Ctrl[13].bit[3] = 3;
- state->Init_Ctrl[13].val[3] = 1;
- state->Init_Ctrl[13].addr[4] = 11;
- state->Init_Ctrl[13].bit[4] = 4;
- state->Init_Ctrl[13].val[4] = 1;
- state->Init_Ctrl[13].addr[5] = 11;
- state->Init_Ctrl[13].bit[5] = 5;
- state->Init_Ctrl[13].val[5] = 0;
- state->Init_Ctrl[13].addr[6] = 11;
- state->Init_Ctrl[13].bit[6] = 6;
- state->Init_Ctrl[13].val[6] = 0;
-
- state->Init_Ctrl[14].Ctrl_Num = CHCAL_FRAC_MOD_IF ;
- state->Init_Ctrl[14].size = 16 ;
- state->Init_Ctrl[14].addr[0] = 13;
- state->Init_Ctrl[14].bit[0] = 0;
- state->Init_Ctrl[14].val[0] = 0;
- state->Init_Ctrl[14].addr[1] = 13;
- state->Init_Ctrl[14].bit[1] = 1;
- state->Init_Ctrl[14].val[1] = 0;
- state->Init_Ctrl[14].addr[2] = 13;
- state->Init_Ctrl[14].bit[2] = 2;
- state->Init_Ctrl[14].val[2] = 0;
- state->Init_Ctrl[14].addr[3] = 13;
- state->Init_Ctrl[14].bit[3] = 3;
- state->Init_Ctrl[14].val[3] = 0;
- state->Init_Ctrl[14].addr[4] = 13;
- state->Init_Ctrl[14].bit[4] = 4;
- state->Init_Ctrl[14].val[4] = 0;
- state->Init_Ctrl[14].addr[5] = 13;
- state->Init_Ctrl[14].bit[5] = 5;
- state->Init_Ctrl[14].val[5] = 0;
- state->Init_Ctrl[14].addr[6] = 13;
- state->Init_Ctrl[14].bit[6] = 6;
- state->Init_Ctrl[14].val[6] = 0;
- state->Init_Ctrl[14].addr[7] = 13;
- state->Init_Ctrl[14].bit[7] = 7;
- state->Init_Ctrl[14].val[7] = 0;
- state->Init_Ctrl[14].addr[8] = 12;
- state->Init_Ctrl[14].bit[8] = 0;
- state->Init_Ctrl[14].val[8] = 0;
- state->Init_Ctrl[14].addr[9] = 12;
- state->Init_Ctrl[14].bit[9] = 1;
- state->Init_Ctrl[14].val[9] = 0;
- state->Init_Ctrl[14].addr[10] = 12;
- state->Init_Ctrl[14].bit[10] = 2;
- state->Init_Ctrl[14].val[10] = 0;
- state->Init_Ctrl[14].addr[11] = 12;
- state->Init_Ctrl[14].bit[11] = 3;
- state->Init_Ctrl[14].val[11] = 0;
- state->Init_Ctrl[14].addr[12] = 12;
- state->Init_Ctrl[14].bit[12] = 4;
- state->Init_Ctrl[14].val[12] = 0;
- state->Init_Ctrl[14].addr[13] = 12;
- state->Init_Ctrl[14].bit[13] = 5;
- state->Init_Ctrl[14].val[13] = 1;
- state->Init_Ctrl[14].addr[14] = 12;
- state->Init_Ctrl[14].bit[14] = 6;
- state->Init_Ctrl[14].val[14] = 1;
- state->Init_Ctrl[14].addr[15] = 12;
- state->Init_Ctrl[14].bit[15] = 7;
- state->Init_Ctrl[14].val[15] = 0;
-
- state->Init_Ctrl[15].Ctrl_Num = DRV_RES_SEL ;
- state->Init_Ctrl[15].size = 3 ;
- state->Init_Ctrl[15].addr[0] = 147;
- state->Init_Ctrl[15].bit[0] = 2;
- state->Init_Ctrl[15].val[0] = 0;
- state->Init_Ctrl[15].addr[1] = 147;
- state->Init_Ctrl[15].bit[1] = 3;
- state->Init_Ctrl[15].val[1] = 1;
- state->Init_Ctrl[15].addr[2] = 147;
- state->Init_Ctrl[15].bit[2] = 4;
- state->Init_Ctrl[15].val[2] = 1;
-
- state->Init_Ctrl[16].Ctrl_Num = I_DRIVER ;
- state->Init_Ctrl[16].size = 2 ;
- state->Init_Ctrl[16].addr[0] = 147;
- state->Init_Ctrl[16].bit[0] = 0;
- state->Init_Ctrl[16].val[0] = 0;
- state->Init_Ctrl[16].addr[1] = 147;
- state->Init_Ctrl[16].bit[1] = 1;
- state->Init_Ctrl[16].val[1] = 1;
-
- state->Init_Ctrl[17].Ctrl_Num = EN_AAF ;
- state->Init_Ctrl[17].size = 1 ;
- state->Init_Ctrl[17].addr[0] = 147;
- state->Init_Ctrl[17].bit[0] = 7;
- state->Init_Ctrl[17].val[0] = 0;
-
- state->Init_Ctrl[18].Ctrl_Num = EN_3P ;
- state->Init_Ctrl[18].size = 1 ;
- state->Init_Ctrl[18].addr[0] = 147;
- state->Init_Ctrl[18].bit[0] = 6;
- state->Init_Ctrl[18].val[0] = 0;
-
- state->Init_Ctrl[19].Ctrl_Num = EN_AUX_3P ;
- state->Init_Ctrl[19].size = 1 ;
- state->Init_Ctrl[19].addr[0] = 156;
- state->Init_Ctrl[19].bit[0] = 0;
- state->Init_Ctrl[19].val[0] = 0;
-
- state->Init_Ctrl[20].Ctrl_Num = SEL_AAF_BAND ;
- state->Init_Ctrl[20].size = 1 ;
- state->Init_Ctrl[20].addr[0] = 147;
- state->Init_Ctrl[20].bit[0] = 5;
- state->Init_Ctrl[20].val[0] = 0;
-
- state->Init_Ctrl[21].Ctrl_Num = SEQ_ENCLK16_CLK_OUT ;
- state->Init_Ctrl[21].size = 1 ;
- state->Init_Ctrl[21].addr[0] = 137;
- state->Init_Ctrl[21].bit[0] = 4;
- state->Init_Ctrl[21].val[0] = 0;
-
- state->Init_Ctrl[22].Ctrl_Num = SEQ_SEL4_16B ;
- state->Init_Ctrl[22].size = 1 ;
- state->Init_Ctrl[22].addr[0] = 137;
- state->Init_Ctrl[22].bit[0] = 7;
- state->Init_Ctrl[22].val[0] = 0;
-
- state->Init_Ctrl[23].Ctrl_Num = XTAL_CAPSELECT ;
- state->Init_Ctrl[23].size = 1 ;
- state->Init_Ctrl[23].addr[0] = 91;
- state->Init_Ctrl[23].bit[0] = 5;
- state->Init_Ctrl[23].val[0] = 1;
-
- state->Init_Ctrl[24].Ctrl_Num = IF_SEL_DBL ;
- state->Init_Ctrl[24].size = 1 ;
- state->Init_Ctrl[24].addr[0] = 43;
- state->Init_Ctrl[24].bit[0] = 0;
- state->Init_Ctrl[24].val[0] = 1;
-
- state->Init_Ctrl[25].Ctrl_Num = RFSYN_R_DIV ;
- state->Init_Ctrl[25].size = 2 ;
- state->Init_Ctrl[25].addr[0] = 22;
- state->Init_Ctrl[25].bit[0] = 0;
- state->Init_Ctrl[25].val[0] = 1;
- state->Init_Ctrl[25].addr[1] = 22;
- state->Init_Ctrl[25].bit[1] = 1;
- state->Init_Ctrl[25].val[1] = 1;
-
- state->Init_Ctrl[26].Ctrl_Num = SEQ_EXTSYNTHCALIF ;
- state->Init_Ctrl[26].size = 1 ;
- state->Init_Ctrl[26].addr[0] = 134;
- state->Init_Ctrl[26].bit[0] = 2;
- state->Init_Ctrl[26].val[0] = 0;
-
- state->Init_Ctrl[27].Ctrl_Num = SEQ_EXTDCCAL ;
- state->Init_Ctrl[27].size = 1 ;
- state->Init_Ctrl[27].addr[0] = 137;
- state->Init_Ctrl[27].bit[0] = 3;
- state->Init_Ctrl[27].val[0] = 0;
-
- state->Init_Ctrl[28].Ctrl_Num = AGC_EN_RSSI ;
- state->Init_Ctrl[28].size = 1 ;
- state->Init_Ctrl[28].addr[0] = 77;
- state->Init_Ctrl[28].bit[0] = 7;
- state->Init_Ctrl[28].val[0] = 0;
-
- state->Init_Ctrl[29].Ctrl_Num = RFA_ENCLKRFAGC ;
- state->Init_Ctrl[29].size = 1 ;
- state->Init_Ctrl[29].addr[0] = 166;
- state->Init_Ctrl[29].bit[0] = 7;
- state->Init_Ctrl[29].val[0] = 1;
-
- state->Init_Ctrl[30].Ctrl_Num = RFA_RSSI_REFH ;
- state->Init_Ctrl[30].size = 3 ;
- state->Init_Ctrl[30].addr[0] = 166;
- state->Init_Ctrl[30].bit[0] = 0;
- state->Init_Ctrl[30].val[0] = 0;
- state->Init_Ctrl[30].addr[1] = 166;
- state->Init_Ctrl[30].bit[1] = 1;
- state->Init_Ctrl[30].val[1] = 1;
- state->Init_Ctrl[30].addr[2] = 166;
- state->Init_Ctrl[30].bit[2] = 2;
- state->Init_Ctrl[30].val[2] = 1;
-
- state->Init_Ctrl[31].Ctrl_Num = RFA_RSSI_REF ;
- state->Init_Ctrl[31].size = 3 ;
- state->Init_Ctrl[31].addr[0] = 166;
- state->Init_Ctrl[31].bit[0] = 3;
- state->Init_Ctrl[31].val[0] = 1;
- state->Init_Ctrl[31].addr[1] = 166;
- state->Init_Ctrl[31].bit[1] = 4;
- state->Init_Ctrl[31].val[1] = 0;
- state->Init_Ctrl[31].addr[2] = 166;
- state->Init_Ctrl[31].bit[2] = 5;
- state->Init_Ctrl[31].val[2] = 1;
-
- state->Init_Ctrl[32].Ctrl_Num = RFA_RSSI_REFL ;
- state->Init_Ctrl[32].size = 3 ;
- state->Init_Ctrl[32].addr[0] = 167;
- state->Init_Ctrl[32].bit[0] = 0;
- state->Init_Ctrl[32].val[0] = 1;
- state->Init_Ctrl[32].addr[1] = 167;
- state->Init_Ctrl[32].bit[1] = 1;
- state->Init_Ctrl[32].val[1] = 1;
- state->Init_Ctrl[32].addr[2] = 167;
- state->Init_Ctrl[32].bit[2] = 2;
- state->Init_Ctrl[32].val[2] = 0;
-
- state->Init_Ctrl[33].Ctrl_Num = RFA_FLR ;
- state->Init_Ctrl[33].size = 4 ;
- state->Init_Ctrl[33].addr[0] = 168;
- state->Init_Ctrl[33].bit[0] = 0;
- state->Init_Ctrl[33].val[0] = 0;
- state->Init_Ctrl[33].addr[1] = 168;
- state->Init_Ctrl[33].bit[1] = 1;
- state->Init_Ctrl[33].val[1] = 1;
- state->Init_Ctrl[33].addr[2] = 168;
- state->Init_Ctrl[33].bit[2] = 2;
- state->Init_Ctrl[33].val[2] = 0;
- state->Init_Ctrl[33].addr[3] = 168;
- state->Init_Ctrl[33].bit[3] = 3;
- state->Init_Ctrl[33].val[3] = 0;
-
- state->Init_Ctrl[34].Ctrl_Num = RFA_CEIL ;
- state->Init_Ctrl[34].size = 4 ;
- state->Init_Ctrl[34].addr[0] = 168;
- state->Init_Ctrl[34].bit[0] = 4;
- state->Init_Ctrl[34].val[0] = 1;
- state->Init_Ctrl[34].addr[1] = 168;
- state->Init_Ctrl[34].bit[1] = 5;
- state->Init_Ctrl[34].val[1] = 1;
- state->Init_Ctrl[34].addr[2] = 168;
- state->Init_Ctrl[34].bit[2] = 6;
- state->Init_Ctrl[34].val[2] = 1;
- state->Init_Ctrl[34].addr[3] = 168;
- state->Init_Ctrl[34].bit[3] = 7;
- state->Init_Ctrl[34].val[3] = 1;
-
- state->Init_Ctrl[35].Ctrl_Num = SEQ_EXTIQFSMPULSE ;
- state->Init_Ctrl[35].size = 1 ;
- state->Init_Ctrl[35].addr[0] = 135;
- state->Init_Ctrl[35].bit[0] = 0;
- state->Init_Ctrl[35].val[0] = 0;
-
- state->Init_Ctrl[36].Ctrl_Num = OVERRIDE_1 ;
- state->Init_Ctrl[36].size = 1 ;
- state->Init_Ctrl[36].addr[0] = 56;
- state->Init_Ctrl[36].bit[0] = 3;
- state->Init_Ctrl[36].val[0] = 0;
-
- state->Init_Ctrl[37].Ctrl_Num = BB_INITSTATE_DLPF_TUNE ;
- state->Init_Ctrl[37].size = 7 ;
- state->Init_Ctrl[37].addr[0] = 59;
- state->Init_Ctrl[37].bit[0] = 1;
- state->Init_Ctrl[37].val[0] = 0;
- state->Init_Ctrl[37].addr[1] = 59;
- state->Init_Ctrl[37].bit[1] = 2;
- state->Init_Ctrl[37].val[1] = 0;
- state->Init_Ctrl[37].addr[2] = 59;
- state->Init_Ctrl[37].bit[2] = 3;
- state->Init_Ctrl[37].val[2] = 0;
- state->Init_Ctrl[37].addr[3] = 59;
- state->Init_Ctrl[37].bit[3] = 4;
- state->Init_Ctrl[37].val[3] = 0;
- state->Init_Ctrl[37].addr[4] = 59;
- state->Init_Ctrl[37].bit[4] = 5;
- state->Init_Ctrl[37].val[4] = 0;
- state->Init_Ctrl[37].addr[5] = 59;
- state->Init_Ctrl[37].bit[5] = 6;
- state->Init_Ctrl[37].val[5] = 0;
- state->Init_Ctrl[37].addr[6] = 59;
- state->Init_Ctrl[37].bit[6] = 7;
- state->Init_Ctrl[37].val[6] = 0;
-
- state->Init_Ctrl[38].Ctrl_Num = TG_R_DIV ;
- state->Init_Ctrl[38].size = 6 ;
- state->Init_Ctrl[38].addr[0] = 32;
- state->Init_Ctrl[38].bit[0] = 2;
- state->Init_Ctrl[38].val[0] = 0;
- state->Init_Ctrl[38].addr[1] = 32;
- state->Init_Ctrl[38].bit[1] = 3;
- state->Init_Ctrl[38].val[1] = 0;
- state->Init_Ctrl[38].addr[2] = 32;
- state->Init_Ctrl[38].bit[2] = 4;
- state->Init_Ctrl[38].val[2] = 0;
- state->Init_Ctrl[38].addr[3] = 32;
- state->Init_Ctrl[38].bit[3] = 5;
- state->Init_Ctrl[38].val[3] = 0;
- state->Init_Ctrl[38].addr[4] = 32;
- state->Init_Ctrl[38].bit[4] = 6;
- state->Init_Ctrl[38].val[4] = 1;
- state->Init_Ctrl[38].addr[5] = 32;
- state->Init_Ctrl[38].bit[5] = 7;
- state->Init_Ctrl[38].val[5] = 0;
-
- state->Init_Ctrl[39].Ctrl_Num = EN_CHP_LIN_B ;
- state->Init_Ctrl[39].size = 1 ;
- state->Init_Ctrl[39].addr[0] = 25;
- state->Init_Ctrl[39].bit[0] = 3;
- state->Init_Ctrl[39].val[0] = 1;
-
-
- state->CH_Ctrl_Num = CHCTRL_NUM ;
-
- state->CH_Ctrl[0].Ctrl_Num = DN_POLY ;
- state->CH_Ctrl[0].size = 2 ;
- state->CH_Ctrl[0].addr[0] = 68;
- state->CH_Ctrl[0].bit[0] = 6;
- state->CH_Ctrl[0].val[0] = 1;
- state->CH_Ctrl[0].addr[1] = 68;
- state->CH_Ctrl[0].bit[1] = 7;
- state->CH_Ctrl[0].val[1] = 1;
-
- state->CH_Ctrl[1].Ctrl_Num = DN_RFGAIN ;
- state->CH_Ctrl[1].size = 2 ;
- state->CH_Ctrl[1].addr[0] = 70;
- state->CH_Ctrl[1].bit[0] = 6;
- state->CH_Ctrl[1].val[0] = 1;
- state->CH_Ctrl[1].addr[1] = 70;
- state->CH_Ctrl[1].bit[1] = 7;
- state->CH_Ctrl[1].val[1] = 0;
-
- state->CH_Ctrl[2].Ctrl_Num = DN_CAP_RFLPF ;
- state->CH_Ctrl[2].size = 9 ;
- state->CH_Ctrl[2].addr[0] = 69;
- state->CH_Ctrl[2].bit[0] = 5;
- state->CH_Ctrl[2].val[0] = 0;
- state->CH_Ctrl[2].addr[1] = 69;
- state->CH_Ctrl[2].bit[1] = 6;
- state->CH_Ctrl[2].val[1] = 0;
- state->CH_Ctrl[2].addr[2] = 69;
- state->CH_Ctrl[2].bit[2] = 7;
- state->CH_Ctrl[2].val[2] = 0;
- state->CH_Ctrl[2].addr[3] = 68;
- state->CH_Ctrl[2].bit[3] = 0;
- state->CH_Ctrl[2].val[3] = 0;
- state->CH_Ctrl[2].addr[4] = 68;
- state->CH_Ctrl[2].bit[4] = 1;
- state->CH_Ctrl[2].val[4] = 0;
- state->CH_Ctrl[2].addr[5] = 68;
- state->CH_Ctrl[2].bit[5] = 2;
- state->CH_Ctrl[2].val[5] = 0;
- state->CH_Ctrl[2].addr[6] = 68;
- state->CH_Ctrl[2].bit[6] = 3;
- state->CH_Ctrl[2].val[6] = 0;
- state->CH_Ctrl[2].addr[7] = 68;
- state->CH_Ctrl[2].bit[7] = 4;
- state->CH_Ctrl[2].val[7] = 0;
- state->CH_Ctrl[2].addr[8] = 68;
- state->CH_Ctrl[2].bit[8] = 5;
- state->CH_Ctrl[2].val[8] = 0;
-
- state->CH_Ctrl[3].Ctrl_Num = DN_EN_VHFUHFBAR ;
- state->CH_Ctrl[3].size = 1 ;
- state->CH_Ctrl[3].addr[0] = 70;
- state->CH_Ctrl[3].bit[0] = 5;
- state->CH_Ctrl[3].val[0] = 0;
-
- state->CH_Ctrl[4].Ctrl_Num = DN_GAIN_ADJUST ;
- state->CH_Ctrl[4].size = 3 ;
- state->CH_Ctrl[4].addr[0] = 73;
- state->CH_Ctrl[4].bit[0] = 4;
- state->CH_Ctrl[4].val[0] = 0;
- state->CH_Ctrl[4].addr[1] = 73;
- state->CH_Ctrl[4].bit[1] = 5;
- state->CH_Ctrl[4].val[1] = 1;
- state->CH_Ctrl[4].addr[2] = 73;
- state->CH_Ctrl[4].bit[2] = 6;
- state->CH_Ctrl[4].val[2] = 0;
-
- state->CH_Ctrl[5].Ctrl_Num = DN_IQTNBUF_AMP ;
- state->CH_Ctrl[5].size = 4 ;
- state->CH_Ctrl[5].addr[0] = 70;
- state->CH_Ctrl[5].bit[0] = 0;
- state->CH_Ctrl[5].val[0] = 0;
- state->CH_Ctrl[5].addr[1] = 70;
- state->CH_Ctrl[5].bit[1] = 1;
- state->CH_Ctrl[5].val[1] = 0;
- state->CH_Ctrl[5].addr[2] = 70;
- state->CH_Ctrl[5].bit[2] = 2;
- state->CH_Ctrl[5].val[2] = 0;
- state->CH_Ctrl[5].addr[3] = 70;
- state->CH_Ctrl[5].bit[3] = 3;
- state->CH_Ctrl[5].val[3] = 0;
-
- state->CH_Ctrl[6].Ctrl_Num = DN_IQTNGNBFBIAS_BST ;
- state->CH_Ctrl[6].size = 1 ;
- state->CH_Ctrl[6].addr[0] = 70;
- state->CH_Ctrl[6].bit[0] = 4;
- state->CH_Ctrl[6].val[0] = 1;
-
- state->CH_Ctrl[7].Ctrl_Num = RFSYN_EN_OUTMUX ;
- state->CH_Ctrl[7].size = 1 ;
- state->CH_Ctrl[7].addr[0] = 111;
- state->CH_Ctrl[7].bit[0] = 4;
- state->CH_Ctrl[7].val[0] = 0;
-
- state->CH_Ctrl[8].Ctrl_Num = RFSYN_SEL_VCO_OUT ;
- state->CH_Ctrl[8].size = 1 ;
- state->CH_Ctrl[8].addr[0] = 111;
- state->CH_Ctrl[8].bit[0] = 7;
- state->CH_Ctrl[8].val[0] = 1;
-
- state->CH_Ctrl[9].Ctrl_Num = RFSYN_SEL_VCO_HI ;
- state->CH_Ctrl[9].size = 1 ;
- state->CH_Ctrl[9].addr[0] = 111;
- state->CH_Ctrl[9].bit[0] = 6;
- state->CH_Ctrl[9].val[0] = 1;
-
- state->CH_Ctrl[10].Ctrl_Num = RFSYN_SEL_DIVM ;
- state->CH_Ctrl[10].size = 1 ;
- state->CH_Ctrl[10].addr[0] = 111;
- state->CH_Ctrl[10].bit[0] = 5;
- state->CH_Ctrl[10].val[0] = 0;
-
- state->CH_Ctrl[11].Ctrl_Num = RFSYN_RF_DIV_BIAS ;
- state->CH_Ctrl[11].size = 2 ;
- state->CH_Ctrl[11].addr[0] = 110;
- state->CH_Ctrl[11].bit[0] = 0;
- state->CH_Ctrl[11].val[0] = 1;
- state->CH_Ctrl[11].addr[1] = 110;
- state->CH_Ctrl[11].bit[1] = 1;
- state->CH_Ctrl[11].val[1] = 0;
-
- state->CH_Ctrl[12].Ctrl_Num = DN_SEL_FREQ ;
- state->CH_Ctrl[12].size = 3 ;
- state->CH_Ctrl[12].addr[0] = 69;
- state->CH_Ctrl[12].bit[0] = 2;
- state->CH_Ctrl[12].val[0] = 0;
- state->CH_Ctrl[12].addr[1] = 69;
- state->CH_Ctrl[12].bit[1] = 3;
- state->CH_Ctrl[12].val[1] = 0;
- state->CH_Ctrl[12].addr[2] = 69;
- state->CH_Ctrl[12].bit[2] = 4;
- state->CH_Ctrl[12].val[2] = 0;
-
- state->CH_Ctrl[13].Ctrl_Num = RFSYN_VCO_BIAS ;
- state->CH_Ctrl[13].size = 6 ;
- state->CH_Ctrl[13].addr[0] = 110;
- state->CH_Ctrl[13].bit[0] = 2;
- state->CH_Ctrl[13].val[0] = 0;
- state->CH_Ctrl[13].addr[1] = 110;
- state->CH_Ctrl[13].bit[1] = 3;
- state->CH_Ctrl[13].val[1] = 0;
- state->CH_Ctrl[13].addr[2] = 110;
- state->CH_Ctrl[13].bit[2] = 4;
- state->CH_Ctrl[13].val[2] = 0;
- state->CH_Ctrl[13].addr[3] = 110;
- state->CH_Ctrl[13].bit[3] = 5;
- state->CH_Ctrl[13].val[3] = 0;
- state->CH_Ctrl[13].addr[4] = 110;
- state->CH_Ctrl[13].bit[4] = 6;
- state->CH_Ctrl[13].val[4] = 0;
- state->CH_Ctrl[13].addr[5] = 110;
- state->CH_Ctrl[13].bit[5] = 7;
- state->CH_Ctrl[13].val[5] = 1;
-
- state->CH_Ctrl[14].Ctrl_Num = CHCAL_INT_MOD_RF ;
- state->CH_Ctrl[14].size = 7 ;
- state->CH_Ctrl[14].addr[0] = 14;
- state->CH_Ctrl[14].bit[0] = 0;
- state->CH_Ctrl[14].val[0] = 0;
- state->CH_Ctrl[14].addr[1] = 14;
- state->CH_Ctrl[14].bit[1] = 1;
- state->CH_Ctrl[14].val[1] = 0;
- state->CH_Ctrl[14].addr[2] = 14;
- state->CH_Ctrl[14].bit[2] = 2;
- state->CH_Ctrl[14].val[2] = 0;
- state->CH_Ctrl[14].addr[3] = 14;
- state->CH_Ctrl[14].bit[3] = 3;
- state->CH_Ctrl[14].val[3] = 0;
- state->CH_Ctrl[14].addr[4] = 14;
- state->CH_Ctrl[14].bit[4] = 4;
- state->CH_Ctrl[14].val[4] = 0;
- state->CH_Ctrl[14].addr[5] = 14;
- state->CH_Ctrl[14].bit[5] = 5;
- state->CH_Ctrl[14].val[5] = 0;
- state->CH_Ctrl[14].addr[6] = 14;
- state->CH_Ctrl[14].bit[6] = 6;
- state->CH_Ctrl[14].val[6] = 0;
-
- state->CH_Ctrl[15].Ctrl_Num = CHCAL_FRAC_MOD_RF ;
- state->CH_Ctrl[15].size = 18 ;
- state->CH_Ctrl[15].addr[0] = 17;
- state->CH_Ctrl[15].bit[0] = 6;
- state->CH_Ctrl[15].val[0] = 0;
- state->CH_Ctrl[15].addr[1] = 17;
- state->CH_Ctrl[15].bit[1] = 7;
- state->CH_Ctrl[15].val[1] = 0;
- state->CH_Ctrl[15].addr[2] = 16;
- state->CH_Ctrl[15].bit[2] = 0;
- state->CH_Ctrl[15].val[2] = 0;
- state->CH_Ctrl[15].addr[3] = 16;
- state->CH_Ctrl[15].bit[3] = 1;
- state->CH_Ctrl[15].val[3] = 0;
- state->CH_Ctrl[15].addr[4] = 16;
- state->CH_Ctrl[15].bit[4] = 2;
- state->CH_Ctrl[15].val[4] = 0;
- state->CH_Ctrl[15].addr[5] = 16;
- state->CH_Ctrl[15].bit[5] = 3;
- state->CH_Ctrl[15].val[5] = 0;
- state->CH_Ctrl[15].addr[6] = 16;
- state->CH_Ctrl[15].bit[6] = 4;
- state->CH_Ctrl[15].val[6] = 0;
- state->CH_Ctrl[15].addr[7] = 16;
- state->CH_Ctrl[15].bit[7] = 5;
- state->CH_Ctrl[15].val[7] = 0;
- state->CH_Ctrl[15].addr[8] = 16;
- state->CH_Ctrl[15].bit[8] = 6;
- state->CH_Ctrl[15].val[8] = 0;
- state->CH_Ctrl[15].addr[9] = 16;
- state->CH_Ctrl[15].bit[9] = 7;
- state->CH_Ctrl[15].val[9] = 0;
- state->CH_Ctrl[15].addr[10] = 15;
- state->CH_Ctrl[15].bit[10] = 0;
- state->CH_Ctrl[15].val[10] = 0;
- state->CH_Ctrl[15].addr[11] = 15;
- state->CH_Ctrl[15].bit[11] = 1;
- state->CH_Ctrl[15].val[11] = 0;
- state->CH_Ctrl[15].addr[12] = 15;
- state->CH_Ctrl[15].bit[12] = 2;
- state->CH_Ctrl[15].val[12] = 0;
- state->CH_Ctrl[15].addr[13] = 15;
- state->CH_Ctrl[15].bit[13] = 3;
- state->CH_Ctrl[15].val[13] = 0;
- state->CH_Ctrl[15].addr[14] = 15;
- state->CH_Ctrl[15].bit[14] = 4;
- state->CH_Ctrl[15].val[14] = 0;
- state->CH_Ctrl[15].addr[15] = 15;
- state->CH_Ctrl[15].bit[15] = 5;
- state->CH_Ctrl[15].val[15] = 0;
- state->CH_Ctrl[15].addr[16] = 15;
- state->CH_Ctrl[15].bit[16] = 6;
- state->CH_Ctrl[15].val[16] = 1;
- state->CH_Ctrl[15].addr[17] = 15;
- state->CH_Ctrl[15].bit[17] = 7;
- state->CH_Ctrl[15].val[17] = 1;
-
- state->CH_Ctrl[16].Ctrl_Num = RFSYN_LPF_R ;
- state->CH_Ctrl[16].size = 5 ;
- state->CH_Ctrl[16].addr[0] = 112;
- state->CH_Ctrl[16].bit[0] = 0;
- state->CH_Ctrl[16].val[0] = 0;
- state->CH_Ctrl[16].addr[1] = 112;
- state->CH_Ctrl[16].bit[1] = 1;
- state->CH_Ctrl[16].val[1] = 0;
- state->CH_Ctrl[16].addr[2] = 112;
- state->CH_Ctrl[16].bit[2] = 2;
- state->CH_Ctrl[16].val[2] = 0;
- state->CH_Ctrl[16].addr[3] = 112;
- state->CH_Ctrl[16].bit[3] = 3;
- state->CH_Ctrl[16].val[3] = 0;
- state->CH_Ctrl[16].addr[4] = 112;
- state->CH_Ctrl[16].bit[4] = 4;
- state->CH_Ctrl[16].val[4] = 1;
-
- state->CH_Ctrl[17].Ctrl_Num = CHCAL_EN_INT_RF ;
- state->CH_Ctrl[17].size = 1 ;
- state->CH_Ctrl[17].addr[0] = 14;
- state->CH_Ctrl[17].bit[0] = 7;
- state->CH_Ctrl[17].val[0] = 0;
-
- state->CH_Ctrl[18].Ctrl_Num = TG_LO_DIVVAL ;
- state->CH_Ctrl[18].size = 4 ;
- state->CH_Ctrl[18].addr[0] = 107;
- state->CH_Ctrl[18].bit[0] = 3;
- state->CH_Ctrl[18].val[0] = 0;
- state->CH_Ctrl[18].addr[1] = 107;
- state->CH_Ctrl[18].bit[1] = 4;
- state->CH_Ctrl[18].val[1] = 0;
- state->CH_Ctrl[18].addr[2] = 107;
- state->CH_Ctrl[18].bit[2] = 5;
- state->CH_Ctrl[18].val[2] = 0;
- state->CH_Ctrl[18].addr[3] = 107;
- state->CH_Ctrl[18].bit[3] = 6;
- state->CH_Ctrl[18].val[3] = 0;
-
- state->CH_Ctrl[19].Ctrl_Num = TG_LO_SELVAL ;
- state->CH_Ctrl[19].size = 3 ;
- state->CH_Ctrl[19].addr[0] = 107;
- state->CH_Ctrl[19].bit[0] = 7;
- state->CH_Ctrl[19].val[0] = 1;
- state->CH_Ctrl[19].addr[1] = 106;
- state->CH_Ctrl[19].bit[1] = 0;
- state->CH_Ctrl[19].val[1] = 1;
- state->CH_Ctrl[19].addr[2] = 106;
- state->CH_Ctrl[19].bit[2] = 1;
- state->CH_Ctrl[19].val[2] = 1;
-
- state->CH_Ctrl[20].Ctrl_Num = TG_DIV_VAL ;
- state->CH_Ctrl[20].size = 11 ;
- state->CH_Ctrl[20].addr[0] = 109;
- state->CH_Ctrl[20].bit[0] = 2;
- state->CH_Ctrl[20].val[0] = 0;
- state->CH_Ctrl[20].addr[1] = 109;
- state->CH_Ctrl[20].bit[1] = 3;
- state->CH_Ctrl[20].val[1] = 0;
- state->CH_Ctrl[20].addr[2] = 109;
- state->CH_Ctrl[20].bit[2] = 4;
- state->CH_Ctrl[20].val[2] = 0;
- state->CH_Ctrl[20].addr[3] = 109;
- state->CH_Ctrl[20].bit[3] = 5;
- state->CH_Ctrl[20].val[3] = 0;
- state->CH_Ctrl[20].addr[4] = 109;
- state->CH_Ctrl[20].bit[4] = 6;
- state->CH_Ctrl[20].val[4] = 0;
- state->CH_Ctrl[20].addr[5] = 109;
- state->CH_Ctrl[20].bit[5] = 7;
- state->CH_Ctrl[20].val[5] = 0;
- state->CH_Ctrl[20].addr[6] = 108;
- state->CH_Ctrl[20].bit[6] = 0;
- state->CH_Ctrl[20].val[6] = 0;
- state->CH_Ctrl[20].addr[7] = 108;
- state->CH_Ctrl[20].bit[7] = 1;
- state->CH_Ctrl[20].val[7] = 0;
- state->CH_Ctrl[20].addr[8] = 108;
- state->CH_Ctrl[20].bit[8] = 2;
- state->CH_Ctrl[20].val[8] = 1;
- state->CH_Ctrl[20].addr[9] = 108;
- state->CH_Ctrl[20].bit[9] = 3;
- state->CH_Ctrl[20].val[9] = 1;
- state->CH_Ctrl[20].addr[10] = 108;
- state->CH_Ctrl[20].bit[10] = 4;
- state->CH_Ctrl[20].val[10] = 1;
-
- state->CH_Ctrl[21].Ctrl_Num = TG_VCO_BIAS ;
- state->CH_Ctrl[21].size = 6 ;
- state->CH_Ctrl[21].addr[0] = 106;
- state->CH_Ctrl[21].bit[0] = 2;
- state->CH_Ctrl[21].val[0] = 0;
- state->CH_Ctrl[21].addr[1] = 106;
- state->CH_Ctrl[21].bit[1] = 3;
- state->CH_Ctrl[21].val[1] = 0;
- state->CH_Ctrl[21].addr[2] = 106;
- state->CH_Ctrl[21].bit[2] = 4;
- state->CH_Ctrl[21].val[2] = 0;
- state->CH_Ctrl[21].addr[3] = 106;
- state->CH_Ctrl[21].bit[3] = 5;
- state->CH_Ctrl[21].val[3] = 0;
- state->CH_Ctrl[21].addr[4] = 106;
- state->CH_Ctrl[21].bit[4] = 6;
- state->CH_Ctrl[21].val[4] = 0;
- state->CH_Ctrl[21].addr[5] = 106;
- state->CH_Ctrl[21].bit[5] = 7;
- state->CH_Ctrl[21].val[5] = 1;
-
- state->CH_Ctrl[22].Ctrl_Num = SEQ_EXTPOWERUP ;
- state->CH_Ctrl[22].size = 1 ;
- state->CH_Ctrl[22].addr[0] = 138;
- state->CH_Ctrl[22].bit[0] = 4;
- state->CH_Ctrl[22].val[0] = 1;
-
- state->CH_Ctrl[23].Ctrl_Num = OVERRIDE_2 ;
- state->CH_Ctrl[23].size = 1 ;
- state->CH_Ctrl[23].addr[0] = 17;
- state->CH_Ctrl[23].bit[0] = 5;
- state->CH_Ctrl[23].val[0] = 0;
-
- state->CH_Ctrl[24].Ctrl_Num = OVERRIDE_3 ;
- state->CH_Ctrl[24].size = 1 ;
- state->CH_Ctrl[24].addr[0] = 111;
- state->CH_Ctrl[24].bit[0] = 3;
- state->CH_Ctrl[24].val[0] = 0;
-
- state->CH_Ctrl[25].Ctrl_Num = OVERRIDE_4 ;
- state->CH_Ctrl[25].size = 1 ;
- state->CH_Ctrl[25].addr[0] = 112;
- state->CH_Ctrl[25].bit[0] = 7;
- state->CH_Ctrl[25].val[0] = 0;
-
- state->CH_Ctrl[26].Ctrl_Num = SEQ_FSM_PULSE ;
- state->CH_Ctrl[26].size = 1 ;
- state->CH_Ctrl[26].addr[0] = 136;
- state->CH_Ctrl[26].bit[0] = 7;
- state->CH_Ctrl[26].val[0] = 0;
-
- state->CH_Ctrl[27].Ctrl_Num = GPIO_4B ;
- state->CH_Ctrl[27].size = 1 ;
- state->CH_Ctrl[27].addr[0] = 149;
- state->CH_Ctrl[27].bit[0] = 7;
- state->CH_Ctrl[27].val[0] = 0;
-
- state->CH_Ctrl[28].Ctrl_Num = GPIO_3B ;
- state->CH_Ctrl[28].size = 1 ;
- state->CH_Ctrl[28].addr[0] = 149;
- state->CH_Ctrl[28].bit[0] = 6;
- state->CH_Ctrl[28].val[0] = 0;
-
- state->CH_Ctrl[29].Ctrl_Num = GPIO_4 ;
- state->CH_Ctrl[29].size = 1 ;
- state->CH_Ctrl[29].addr[0] = 149;
- state->CH_Ctrl[29].bit[0] = 5;
- state->CH_Ctrl[29].val[0] = 1;
-
- state->CH_Ctrl[30].Ctrl_Num = GPIO_3 ;
- state->CH_Ctrl[30].size = 1 ;
- state->CH_Ctrl[30].addr[0] = 149;
- state->CH_Ctrl[30].bit[0] = 4;
- state->CH_Ctrl[30].val[0] = 1;
-
- state->CH_Ctrl[31].Ctrl_Num = GPIO_1B ;
- state->CH_Ctrl[31].size = 1 ;
- state->CH_Ctrl[31].addr[0] = 149;
- state->CH_Ctrl[31].bit[0] = 3;
- state->CH_Ctrl[31].val[0] = 0;
-
- state->CH_Ctrl[32].Ctrl_Num = DAC_A_ENABLE ;
- state->CH_Ctrl[32].size = 1 ;
- state->CH_Ctrl[32].addr[0] = 93;
- state->CH_Ctrl[32].bit[0] = 1;
- state->CH_Ctrl[32].val[0] = 0;
-
- state->CH_Ctrl[33].Ctrl_Num = DAC_B_ENABLE ;
- state->CH_Ctrl[33].size = 1 ;
- state->CH_Ctrl[33].addr[0] = 93;
- state->CH_Ctrl[33].bit[0] = 0;
- state->CH_Ctrl[33].val[0] = 0;
-
- state->CH_Ctrl[34].Ctrl_Num = DAC_DIN_A ;
- state->CH_Ctrl[34].size = 6 ;
- state->CH_Ctrl[34].addr[0] = 92;
- state->CH_Ctrl[34].bit[0] = 2;
- state->CH_Ctrl[34].val[0] = 0;
- state->CH_Ctrl[34].addr[1] = 92;
- state->CH_Ctrl[34].bit[1] = 3;
- state->CH_Ctrl[34].val[1] = 0;
- state->CH_Ctrl[34].addr[2] = 92;
- state->CH_Ctrl[34].bit[2] = 4;
- state->CH_Ctrl[34].val[2] = 0;
- state->CH_Ctrl[34].addr[3] = 92;
- state->CH_Ctrl[34].bit[3] = 5;
- state->CH_Ctrl[34].val[3] = 0;
- state->CH_Ctrl[34].addr[4] = 92;
- state->CH_Ctrl[34].bit[4] = 6;
- state->CH_Ctrl[34].val[4] = 0;
- state->CH_Ctrl[34].addr[5] = 92;
- state->CH_Ctrl[34].bit[5] = 7;
- state->CH_Ctrl[34].val[5] = 0;
-
- state->CH_Ctrl[35].Ctrl_Num = DAC_DIN_B ;
- state->CH_Ctrl[35].size = 6 ;
- state->CH_Ctrl[35].addr[0] = 93;
- state->CH_Ctrl[35].bit[0] = 2;
- state->CH_Ctrl[35].val[0] = 0;
- state->CH_Ctrl[35].addr[1] = 93;
- state->CH_Ctrl[35].bit[1] = 3;
- state->CH_Ctrl[35].val[1] = 0;
- state->CH_Ctrl[35].addr[2] = 93;
- state->CH_Ctrl[35].bit[2] = 4;
- state->CH_Ctrl[35].val[2] = 0;
- state->CH_Ctrl[35].addr[3] = 93;
- state->CH_Ctrl[35].bit[3] = 5;
- state->CH_Ctrl[35].val[3] = 0;
- state->CH_Ctrl[35].addr[4] = 93;
- state->CH_Ctrl[35].bit[4] = 6;
- state->CH_Ctrl[35].val[4] = 0;
- state->CH_Ctrl[35].addr[5] = 93;
- state->CH_Ctrl[35].bit[5] = 7;
- state->CH_Ctrl[35].val[5] = 0;
-
-#ifdef _MXL_PRODUCTION
- state->CH_Ctrl[36].Ctrl_Num = RFSYN_EN_DIV ;
- state->CH_Ctrl[36].size = 1 ;
- state->CH_Ctrl[36].addr[0] = 109;
- state->CH_Ctrl[36].bit[0] = 1;
- state->CH_Ctrl[36].val[0] = 1;
-
- state->CH_Ctrl[37].Ctrl_Num = RFSYN_DIVM ;
- state->CH_Ctrl[37].size = 2 ;
- state->CH_Ctrl[37].addr[0] = 112;
- state->CH_Ctrl[37].bit[0] = 5;
- state->CH_Ctrl[37].val[0] = 0;
- state->CH_Ctrl[37].addr[1] = 112;
- state->CH_Ctrl[37].bit[1] = 6;
- state->CH_Ctrl[37].val[1] = 0;
-
- state->CH_Ctrl[38].Ctrl_Num = DN_BYPASS_AGC_I2C ;
- state->CH_Ctrl[38].size = 1 ;
- state->CH_Ctrl[38].addr[0] = 65;
- state->CH_Ctrl[38].bit[0] = 1;
- state->CH_Ctrl[38].val[0] = 0;
-#endif
-
- return 0 ;
-}
-
-static void InitTunerControls(struct dvb_frontend *fe)
-{
- MXL5005_RegisterInit(fe);
- MXL5005_ControlInit(fe);
-#ifdef _MXL_INTERNAL
- MXL5005_MXLControlInit(fe);
-#endif
-}
-
-static u16 MXL5005_TunerConfig(struct dvb_frontend *fe,
- u8 Mode, /* 0: Analog Mode ; 1: Digital Mode */
- u8 IF_mode, /* for Analog Mode, 0: zero IF; 1: low IF */
- u32 Bandwidth, /* filter channel bandwidth (6, 7, 8) */
- u32 IF_out, /* Desired IF Out Frequency */
- u32 Fxtal, /* XTAL Frequency */
- u8 AGC_Mode, /* AGC Mode - Dual AGC: 0, Single AGC: 1 */
- u16 TOP, /* 0: Dual AGC; Value: take over point */
- u16 IF_OUT_LOAD, /* IF Out Load Resistor (200 / 300 Ohms) */
- u8 CLOCK_OUT, /* 0: turn off clk out; 1: turn on clock out */
- u8 DIV_OUT, /* 0: Div-1; 1: Div-4 */
- u8 CAPSELECT, /* 0: disable On-Chip pulling cap; 1: enable */
- u8 EN_RSSI, /* 0: disable RSSI; 1: enable RSSI */
-
- /* Modulation Type; */
- /* 0 - Default; 1 - DVB-T; 2 - ATSC; 3 - QAM; 4 - Analog Cable */
- u8 Mod_Type,
-
- /* Tracking Filter */
- /* 0 - Default; 1 - Off; 2 - Type C; 3 - Type C-H */
- u8 TF_Type
- )
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u16 status = 0;
-
- state->Mode = Mode;
- state->IF_Mode = IF_mode;
- state->Chan_Bandwidth = Bandwidth;
- state->IF_OUT = IF_out;
- state->Fxtal = Fxtal;
- state->AGC_Mode = AGC_Mode;
- state->TOP = TOP;
- state->IF_OUT_LOAD = IF_OUT_LOAD;
- state->CLOCK_OUT = CLOCK_OUT;
- state->DIV_OUT = DIV_OUT;
- state->CAPSELECT = CAPSELECT;
- state->EN_RSSI = EN_RSSI;
- state->Mod_Type = Mod_Type;
- state->TF_Type = TF_Type;
-
- /* Initialize all the controls and registers */
- InitTunerControls(fe);
-
- /* Synthesizer LO frequency calculation */
- MXL_SynthIFLO_Calc(fe);
-
- return status;
-}
-
-static void MXL_SynthIFLO_Calc(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- if (state->Mode == 1) /* Digital Mode */
- state->IF_LO = state->IF_OUT;
- else /* Analog Mode */ {
- if (state->IF_Mode == 0) /* Analog Zero IF mode */
- state->IF_LO = state->IF_OUT + 400000;
- else /* Analog Low IF mode */
- state->IF_LO = state->IF_OUT + state->Chan_Bandwidth/2;
- }
-}
-
-static void MXL_SynthRFTGLO_Calc(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
-
- if (state->Mode == 1) /* Digital Mode */ {
- /* remove 20.48MHz setting for 2.6.10 */
- state->RF_LO = state->RF_IN;
- /* change for 2.6.6 */
- state->TG_LO = state->RF_IN - 750000;
- } else /* Analog Mode */ {
- if (state->IF_Mode == 0) /* Analog Zero IF mode */ {
- state->RF_LO = state->RF_IN - 400000;
- state->TG_LO = state->RF_IN - 1750000;
- } else /* Analog Low IF mode */ {
- state->RF_LO = state->RF_IN - state->Chan_Bandwidth/2;
- state->TG_LO = state->RF_IN -
- state->Chan_Bandwidth + 500000;
- }
- }
-}
-
-static u16 MXL_OverwriteICDefault(struct dvb_frontend *fe)
-{
- u16 status = 0;
-
- status += MXL_ControlWrite(fe, OVERRIDE_1, 1);
- status += MXL_ControlWrite(fe, OVERRIDE_2, 1);
- status += MXL_ControlWrite(fe, OVERRIDE_3, 1);
- status += MXL_ControlWrite(fe, OVERRIDE_4, 1);
-
- return status;
-}
-
-static u16 MXL_BlockInit(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u16 status = 0;
-
- status += MXL_OverwriteICDefault(fe);
-
- /* Downconverter Control Dig Ana */
- status += MXL_ControlWrite(fe, DN_IQTN_AMP_CUT, state->Mode ? 1 : 0);
-
- /* Filter Control Dig Ana */
- status += MXL_ControlWrite(fe, BB_MODE, state->Mode ? 0 : 1);
- status += MXL_ControlWrite(fe, BB_BUF, state->Mode ? 3 : 2);
- status += MXL_ControlWrite(fe, BB_BUF_OA, state->Mode ? 1 : 0);
- status += MXL_ControlWrite(fe, BB_IQSWAP, state->Mode ? 0 : 1);
- status += MXL_ControlWrite(fe, BB_INITSTATE_DLPF_TUNE, 0);
-
- /* Initialize Low-Pass Filter */
- if (state->Mode) { /* Digital Mode */
- switch (state->Chan_Bandwidth) {
- case 8000000:
- status += MXL_ControlWrite(fe, BB_DLPF_BANDSEL, 0);
- break;
- case 7000000:
- status += MXL_ControlWrite(fe, BB_DLPF_BANDSEL, 2);
- break;
- case 6000000:
- status += MXL_ControlWrite(fe,
- BB_DLPF_BANDSEL, 3);
- break;
- }
- } else { /* Analog Mode */
- switch (state->Chan_Bandwidth) {
- case 8000000: /* Low Zero */
- status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT,
- (state->IF_Mode ? 0 : 3));
- break;
- case 7000000:
- status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT,
- (state->IF_Mode ? 1 : 4));
- break;
- case 6000000:
- status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT,
- (state->IF_Mode ? 2 : 5));
- break;
- }
- }
-
- /* Charge Pump Control Dig Ana */
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, state->Mode ? 5 : 8);
- status += MXL_ControlWrite(fe,
- RFSYN_EN_CHP_HIGAIN, state->Mode ? 1 : 1);
- status += MXL_ControlWrite(fe, EN_CHP_LIN_B, state->Mode ? 0 : 0);
-
- /* AGC TOP Control */
- if (state->AGC_Mode == 0) /* Dual AGC */ {
- status += MXL_ControlWrite(fe, AGC_IF, 15);
- status += MXL_ControlWrite(fe, AGC_RF, 15);
- } else /* Single AGC Mode Dig Ana */
- status += MXL_ControlWrite(fe, AGC_RF, state->Mode ? 15 : 12);
-
- if (state->TOP == 55) /* TOP == 5.5 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x0);
-
- if (state->TOP == 72) /* TOP == 7.2 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x1);
-
- if (state->TOP == 92) /* TOP == 9.2 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x2);
-
- if (state->TOP == 110) /* TOP == 11.0 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x3);
-
- if (state->TOP == 129) /* TOP == 12.9 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x4);
-
- if (state->TOP == 147) /* TOP == 14.7 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x5);
-
- if (state->TOP == 168) /* TOP == 16.8 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x6);
-
- if (state->TOP == 194) /* TOP == 19.4 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x7);
-
- if (state->TOP == 212) /* TOP == 21.2 */
- status += MXL_ControlWrite(fe, AGC_IF, 0x9);
-
- if (state->TOP == 232) /* TOP == 23.2 */
- status += MXL_ControlWrite(fe, AGC_IF, 0xA);
-
- if (state->TOP == 252) /* TOP == 25.2 */
- status += MXL_ControlWrite(fe, AGC_IF, 0xB);
-
- if (state->TOP == 271) /* TOP == 27.1 */
- status += MXL_ControlWrite(fe, AGC_IF, 0xC);
-
- if (state->TOP == 292) /* TOP == 29.2 */
- status += MXL_ControlWrite(fe, AGC_IF, 0xD);
-
- if (state->TOP == 317) /* TOP == 31.7 */
- status += MXL_ControlWrite(fe, AGC_IF, 0xE);
-
- if (state->TOP == 349) /* TOP == 34.9 */
- status += MXL_ControlWrite(fe, AGC_IF, 0xF);
-
- /* IF Synthesizer Control */
- status += MXL_IFSynthInit(fe);
-
- /* IF UpConverter Control */
- if (state->IF_OUT_LOAD == 200) {
- status += MXL_ControlWrite(fe, DRV_RES_SEL, 6);
- status += MXL_ControlWrite(fe, I_DRIVER, 2);
- }
- if (state->IF_OUT_LOAD == 300) {
- status += MXL_ControlWrite(fe, DRV_RES_SEL, 4);
- status += MXL_ControlWrite(fe, I_DRIVER, 1);
- }
-
- /* Anti-Alias Filtering Control
- * initialise Anti-Aliasing Filter
- */
- if (state->Mode) { /* Digital Mode */
- if (state->IF_OUT >= 4000000UL && state->IF_OUT <= 6280000UL) {
- status += MXL_ControlWrite(fe, EN_AAF, 1);
- status += MXL_ControlWrite(fe, EN_3P, 1);
- status += MXL_ControlWrite(fe, EN_AUX_3P, 1);
- status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0);
- }
- if ((state->IF_OUT == 36125000UL) ||
- (state->IF_OUT == 36150000UL)) {
- status += MXL_ControlWrite(fe, EN_AAF, 1);
- status += MXL_ControlWrite(fe, EN_3P, 1);
- status += MXL_ControlWrite(fe, EN_AUX_3P, 1);
- status += MXL_ControlWrite(fe, SEL_AAF_BAND, 1);
- }
- if (state->IF_OUT > 36150000UL) {
- status += MXL_ControlWrite(fe, EN_AAF, 0);
- status += MXL_ControlWrite(fe, EN_3P, 1);
- status += MXL_ControlWrite(fe, EN_AUX_3P, 1);
- status += MXL_ControlWrite(fe, SEL_AAF_BAND, 1);
- }
- } else { /* Analog Mode */
- if (state->IF_OUT >= 4000000UL && state->IF_OUT <= 5000000UL) {
- status += MXL_ControlWrite(fe, EN_AAF, 1);
- status += MXL_ControlWrite(fe, EN_3P, 1);
- status += MXL_ControlWrite(fe, EN_AUX_3P, 1);
- status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0);
- }
- if (state->IF_OUT > 5000000UL) {
- status += MXL_ControlWrite(fe, EN_AAF, 0);
- status += MXL_ControlWrite(fe, EN_3P, 0);
- status += MXL_ControlWrite(fe, EN_AUX_3P, 0);
- status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0);
- }
- }
-
- /* Demod Clock Out */
- if (state->CLOCK_OUT)
- status += MXL_ControlWrite(fe, SEQ_ENCLK16_CLK_OUT, 1);
- else
- status += MXL_ControlWrite(fe, SEQ_ENCLK16_CLK_OUT, 0);
-
- if (state->DIV_OUT == 1)
- status += MXL_ControlWrite(fe, SEQ_SEL4_16B, 1);
- if (state->DIV_OUT == 0)
- status += MXL_ControlWrite(fe, SEQ_SEL4_16B, 0);
-
- /* Crystal Control */
- if (state->CAPSELECT)
- status += MXL_ControlWrite(fe, XTAL_CAPSELECT, 1);
- else
- status += MXL_ControlWrite(fe, XTAL_CAPSELECT, 0);
-
- if (state->Fxtal >= 12000000UL && state->Fxtal <= 16000000UL)
- status += MXL_ControlWrite(fe, IF_SEL_DBL, 1);
- if (state->Fxtal > 16000000UL && state->Fxtal <= 32000000UL)
- status += MXL_ControlWrite(fe, IF_SEL_DBL, 0);
-
- if (state->Fxtal >= 12000000UL && state->Fxtal <= 22000000UL)
- status += MXL_ControlWrite(fe, RFSYN_R_DIV, 3);
- if (state->Fxtal > 22000000UL && state->Fxtal <= 32000000UL)
- status += MXL_ControlWrite(fe, RFSYN_R_DIV, 0);
-
- /* Misc Controls */
- if (state->Mode == 0 && state->IF_Mode == 1) /* Analog LowIF mode */
- status += MXL_ControlWrite(fe, SEQ_EXTIQFSMPULSE, 0);
- else
- status += MXL_ControlWrite(fe, SEQ_EXTIQFSMPULSE, 1);
-
- /* status += MXL_ControlRead(fe, IF_DIVVAL, &IF_DIVVAL_Val); */
-
- /* Set TG_R_DIV */
- status += MXL_ControlWrite(fe, TG_R_DIV,
- MXL_Ceiling(state->Fxtal, 1000000));
-
- /* Apply Default value to BB_INITSTATE_DLPF_TUNE */
-
- /* RSSI Control */
- if (state->EN_RSSI) {
- status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
- status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
- status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
-
- /* RSSI reference point */
- status += MXL_ControlWrite(fe, RFA_RSSI_REF, 2);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 3);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1);
-
- /* TOP point */
- status += MXL_ControlWrite(fe, RFA_FLR, 0);
- status += MXL_ControlWrite(fe, RFA_CEIL, 12);
- }
-
- /* Modulation type bit settings
- * Override the control values preset
- */
- if (state->Mod_Type == MXL_DVBT) /* DVB-T Mode */ {
- state->AGC_Mode = 1; /* Single AGC Mode */
-
- /* Enable RSSI */
- status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
- status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
- status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
-
- /* RSSI reference point */
- status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1);
-
- /* TOP point */
- status += MXL_ControlWrite(fe, RFA_FLR, 2);
- status += MXL_ControlWrite(fe, RFA_CEIL, 13);
- if (state->IF_OUT <= 6280000UL) /* Low IF */
- status += MXL_ControlWrite(fe, BB_IQSWAP, 0);
- else /* High IF */
- status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
-
- }
- if (state->Mod_Type == MXL_ATSC) /* ATSC Mode */ {
- state->AGC_Mode = 1; /* Single AGC Mode */
-
- /* Enable RSSI */
- status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
- status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
- status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
-
- /* RSSI reference point */
- status += MXL_ControlWrite(fe, RFA_RSSI_REF, 2);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 4);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1);
-
- /* TOP point */
- status += MXL_ControlWrite(fe, RFA_FLR, 2);
- status += MXL_ControlWrite(fe, RFA_CEIL, 13);
- status += MXL_ControlWrite(fe, BB_INITSTATE_DLPF_TUNE, 1);
- /* Low Zero */
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 5);
-
- if (state->IF_OUT <= 6280000UL) /* Low IF */
- status += MXL_ControlWrite(fe, BB_IQSWAP, 0);
- else /* High IF */
- status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
- }
- if (state->Mod_Type == MXL_QAM) /* QAM Mode */ {
- state->Mode = MXL_DIGITAL_MODE;
-
- /* state->AGC_Mode = 1; */ /* Single AGC Mode */
-
- /* Disable RSSI */ /* change here for v2.6.5 */
- status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
- status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0);
- status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
-
- /* RSSI reference point */
- status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5);
- status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2);
- /* change here for v2.6.5 */
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
-
- if (state->IF_OUT <= 6280000UL) /* Low IF */
- status += MXL_ControlWrite(fe, BB_IQSWAP, 0);
- else /* High IF */
- status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 2);
-
- }
- if (state->Mod_Type == MXL_ANALOG_CABLE) {
- /* Analog Cable Mode */
- /* state->Mode = MXL_DIGITAL_MODE; */
-
- state->AGC_Mode = 1; /* Single AGC Mode */
-
- /* Disable RSSI */
- status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
- status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0);
- status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
- /* change for 2.6.3 */
- status += MXL_ControlWrite(fe, AGC_IF, 1);
- status += MXL_ControlWrite(fe, AGC_RF, 15);
- status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
- }
-
- if (state->Mod_Type == MXL_ANALOG_OTA) {
- /* Analog OTA Terrestrial mode add for 2.6.7 */
- /* state->Mode = MXL_ANALOG_MODE; */
-
- /* Enable RSSI */
- status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
- status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
- status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
-
- /* RSSI reference point */
- status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5);
- status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2);
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
- status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
- }
-
- /* RSSI disable */
- if (state->EN_RSSI == 0) {
- status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
- status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0);
- status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
- }
-
- return status;
-}
-
-static u16 MXL_IFSynthInit(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u16 status = 0 ;
- u32 Fref = 0 ;
- u32 Kdbl, intModVal ;
- u32 fracModVal ;
- Kdbl = 2 ;
-
- if (state->Fxtal >= 12000000UL && state->Fxtal <= 16000000UL)
- Kdbl = 2 ;
- if (state->Fxtal > 16000000UL && state->Fxtal <= 32000000UL)
- Kdbl = 1 ;
-
- /* IF Synthesizer Control */
- if (state->Mode == 0 && state->IF_Mode == 1) /* Analog Low IF mode */ {
- if (state->IF_LO == 41000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
- Fref = 328000000UL ;
- }
- if (state->IF_LO == 47000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 376000000UL ;
- }
- if (state->IF_LO == 54000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
- Fref = 324000000UL ;
- }
- if (state->IF_LO == 60000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 360000000UL ;
- }
- if (state->IF_LO == 39250000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
- Fref = 314000000UL ;
- }
- if (state->IF_LO == 39650000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
- Fref = 317200000UL ;
- }
- if (state->IF_LO == 40150000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
- Fref = 321200000UL ;
- }
- if (state->IF_LO == 40650000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
- Fref = 325200000UL ;
- }
- }
-
- if (state->Mode || (state->Mode == 0 && state->IF_Mode == 0)) {
- if (state->IF_LO == 57000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 342000000UL ;
- }
- if (state->IF_LO == 44000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 352000000UL ;
- }
- if (state->IF_LO == 43750000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 350000000UL ;
- }
- if (state->IF_LO == 36650000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 366500000UL ;
- }
- if (state->IF_LO == 36150000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 361500000UL ;
- }
- if (state->IF_LO == 36000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 360000000UL ;
- }
- if (state->IF_LO == 35250000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 352500000UL ;
- }
- if (state->IF_LO == 34750000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 347500000UL ;
- }
- if (state->IF_LO == 6280000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 376800000UL ;
- }
- if (state->IF_LO == 5000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 360000000UL ;
- }
- if (state->IF_LO == 4500000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 360000000UL ;
- }
- if (state->IF_LO == 4570000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 365600000UL ;
- }
- if (state->IF_LO == 4000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x05);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 360000000UL ;
- }
- if (state->IF_LO == 57400000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 344400000UL ;
- }
- if (state->IF_LO == 44400000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 355200000UL ;
- }
- if (state->IF_LO == 44150000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 353200000UL ;
- }
- if (state->IF_LO == 37050000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 370500000UL ;
- }
- if (state->IF_LO == 36550000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 365500000UL ;
- }
- if (state->IF_LO == 36125000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 361250000UL ;
- }
- if (state->IF_LO == 6000000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 360000000UL ;
- }
- if (state->IF_LO == 5400000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
- Fref = 324000000UL ;
- }
- if (state->IF_LO == 5380000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
- Fref = 322800000UL ;
- }
- if (state->IF_LO == 5200000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 374400000UL ;
- }
- if (state->IF_LO == 4900000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 352800000UL ;
- }
- if (state->IF_LO == 4400000UL) {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 352000000UL ;
- }
- if (state->IF_LO == 4063000UL) /* add for 2.6.8 */ {
- status += MXL_ControlWrite(fe, IF_DIVVAL, 0x05);
- status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
- Fref = 365670000UL ;
- }
- }
- /* CHCAL_INT_MOD_IF */
- /* CHCAL_FRAC_MOD_IF */
- intModVal = Fref / (state->Fxtal * Kdbl/2);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_IF, intModVal);
-
- fracModVal = (2<<15)*(Fref/1000 - (state->Fxtal/1000 * Kdbl/2) *
- intModVal);
-
- fracModVal = fracModVal / ((state->Fxtal * Kdbl/2)/1000);
- status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_IF, fracModVal);
-
- return status ;
-}
-
-static u16 MXL_TuneRF(struct dvb_frontend *fe, u32 RF_Freq)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u16 status = 0;
- u32 divider_val, E3, E4, E5, E5A;
- u32 Fmax, Fmin, FmaxBin, FminBin;
- u32 Kdbl_RF = 2;
- u32 tg_divval;
- u32 tg_lo;
-
- u32 Fref_TG;
- u32 Fvco;
-
- state->RF_IN = RF_Freq;
-
- MXL_SynthRFTGLO_Calc(fe);
-
- if (state->Fxtal >= 12000000UL && state->Fxtal <= 22000000UL)
- Kdbl_RF = 2;
- if (state->Fxtal > 22000000 && state->Fxtal <= 32000000)
- Kdbl_RF = 1;
-
- /* Downconverter Controls
- * Look-Up Table Implementation for:
- * DN_POLY
- * DN_RFGAIN
- * DN_CAP_RFLPF
- * DN_EN_VHFUHFBAR
- * DN_GAIN_ADJUST
- * Change the boundary reference from RF_IN to RF_LO
- */
- if (state->RF_LO < 40000000UL)
- return -1;
-
- if (state->RF_LO >= 40000000UL && state->RF_LO <= 75000000UL) {
- status += MXL_ControlWrite(fe, DN_POLY, 2);
- status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
- status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 423);
- status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
- status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 1);
- }
- if (state->RF_LO > 75000000UL && state->RF_LO <= 100000000UL) {
- status += MXL_ControlWrite(fe, DN_POLY, 3);
- status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
- status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 222);
- status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
- status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 1);
- }
- if (state->RF_LO > 100000000UL && state->RF_LO <= 150000000UL) {
- status += MXL_ControlWrite(fe, DN_POLY, 3);
- status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
- status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 147);
- status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
- status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 2);
- }
- if (state->RF_LO > 150000000UL && state->RF_LO <= 200000000UL) {
- status += MXL_ControlWrite(fe, DN_POLY, 3);
- status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
- status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 9);
- status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
- status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 2);
- }
- if (state->RF_LO > 200000000UL && state->RF_LO <= 300000000UL) {
- status += MXL_ControlWrite(fe, DN_POLY, 3);
- status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
- status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0);
- status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
- status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3);
- }
- if (state->RF_LO > 300000000UL && state->RF_LO <= 650000000UL) {
- status += MXL_ControlWrite(fe, DN_POLY, 3);
- status += MXL_ControlWrite(fe, DN_RFGAIN, 1);
- status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0);
- status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 0);
- status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3);
- }
- if (state->RF_LO > 650000000UL && state->RF_LO <= 900000000UL) {
- status += MXL_ControlWrite(fe, DN_POLY, 3);
- status += MXL_ControlWrite(fe, DN_RFGAIN, 2);
- status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0);
- status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 0);
- status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3);
- }
- if (state->RF_LO > 900000000UL)
- return -1;
-
- /* DN_IQTNBUF_AMP */
- /* DN_IQTNGNBFBIAS_BST */
- if (state->RF_LO >= 40000000UL && state->RF_LO <= 75000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 75000000UL && state->RF_LO <= 100000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 100000000UL && state->RF_LO <= 150000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 150000000UL && state->RF_LO <= 200000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 200000000UL && state->RF_LO <= 300000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 300000000UL && state->RF_LO <= 400000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 400000000UL && state->RF_LO <= 450000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 450000000UL && state->RF_LO <= 500000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 500000000UL && state->RF_LO <= 550000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 550000000UL && state->RF_LO <= 600000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 600000000UL && state->RF_LO <= 650000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 650000000UL && state->RF_LO <= 700000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 700000000UL && state->RF_LO <= 750000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 750000000UL && state->RF_LO <= 800000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
- }
- if (state->RF_LO > 800000000UL && state->RF_LO <= 850000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 10);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 1);
- }
- if (state->RF_LO > 850000000UL && state->RF_LO <= 900000000UL) {
- status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 10);
- status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 1);
- }
-
- /*
- * Set RF Synth and LO Path Control
- *
- * Look-Up table implementation for:
- * RFSYN_EN_OUTMUX
- * RFSYN_SEL_VCO_OUT
- * RFSYN_SEL_VCO_HI
- * RFSYN_SEL_DIVM
- * RFSYN_RF_DIV_BIAS
- * DN_SEL_FREQ
- *
- * Set divider_val, Fmax, Fmix to use in Equations
- */
- FminBin = 28000000UL ;
- FmaxBin = 42500000UL ;
- if (state->RF_LO >= 40000000UL && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1);
- divider_val = 64 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 42500000UL ;
- FmaxBin = 56000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1);
- divider_val = 64 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 56000000UL ;
- FmaxBin = 85000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1);
- divider_val = 32 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 85000000UL ;
- FmaxBin = 112000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1);
- divider_val = 32 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 112000000UL ;
- FmaxBin = 170000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 2);
- divider_val = 16 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 170000000UL ;
- FmaxBin = 225000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 2);
- divider_val = 16 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 225000000UL ;
- FmaxBin = 300000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 4);
- divider_val = 8 ;
- Fmax = 340000000UL ;
- Fmin = FminBin ;
- }
- FminBin = 300000000UL ;
- FmaxBin = 340000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
- divider_val = 8 ;
- Fmax = FmaxBin ;
- Fmin = 225000000UL ;
- }
- FminBin = 340000000UL ;
- FmaxBin = 450000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 2);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
- divider_val = 8 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 450000000UL ;
- FmaxBin = 680000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 1);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
- divider_val = 4 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 680000000UL ;
- FmaxBin = 900000000UL ;
- if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 1);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
- divider_val = 4 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
-
- /* CHCAL_INT_MOD_RF
- * CHCAL_FRAC_MOD_RF
- * RFSYN_LPF_R
- * CHCAL_EN_INT_RF
- */
- /* Equation E3 RFSYN_VCO_BIAS */
- E3 = (((Fmax-state->RF_LO)/1000)*32)/((Fmax-Fmin)/1000) + 8 ;
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, E3);
-
- /* Equation E4 CHCAL_INT_MOD_RF */
- E4 = (state->RF_LO*divider_val/1000)/(2*state->Fxtal*Kdbl_RF/1000);
- MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, E4);
-
- /* Equation E5 CHCAL_FRAC_MOD_RF CHCAL_EN_INT_RF */
- E5 = ((2<<17)*(state->RF_LO/10000*divider_val -
- (E4*(2*state->Fxtal*Kdbl_RF)/10000))) /
- (2*state->Fxtal*Kdbl_RF/10000);
-
- status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_RF, E5);
-
- /* Equation E5A RFSYN_LPF_R */
- E5A = (((Fmax - state->RF_LO)/1000)*4/((Fmax-Fmin)/1000)) + 1 ;
- status += MXL_ControlWrite(fe, RFSYN_LPF_R, E5A);
-
- /* Euqation E5B CHCAL_EN_INIT_RF */
- status += MXL_ControlWrite(fe, CHCAL_EN_INT_RF, ((E5 == 0) ? 1 : 0));
- /*if (E5 == 0)
- * status += MXL_ControlWrite(fe, CHCAL_EN_INT_RF, 1);
- *else
- * status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_RF, E5);
- */
-
- /*
- * Set TG Synth
- *
- * Look-Up table implementation for:
- * TG_LO_DIVVAL
- * TG_LO_SELVAL
- *
- * Set divider_val, Fmax, Fmix to use in Equations
- */
- if (state->TG_LO < 33000000UL)
- return -1;
-
- FminBin = 33000000UL ;
- FmaxBin = 50000000UL ;
- if (state->TG_LO >= FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x6);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x0);
- divider_val = 36 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 50000000UL ;
- FmaxBin = 67000000UL ;
- if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x1);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x0);
- divider_val = 24 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 67000000UL ;
- FmaxBin = 100000000UL ;
- if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0xC);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2);
- divider_val = 18 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 100000000UL ;
- FmaxBin = 150000000UL ;
- if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2);
- divider_val = 12 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 150000000UL ;
- FmaxBin = 200000000UL ;
- if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2);
- divider_val = 8 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 200000000UL ;
- FmaxBin = 300000000UL ;
- if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x3);
- divider_val = 6 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 300000000UL ;
- FmaxBin = 400000000UL ;
- if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x3);
- divider_val = 4 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 400000000UL ;
- FmaxBin = 600000000UL ;
- if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x7);
- divider_val = 3 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
- FminBin = 600000000UL ;
- FmaxBin = 900000000UL ;
- if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
- status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0);
- status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x7);
- divider_val = 2 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
- }
-
- /* TG_DIV_VAL */
- tg_divval = (state->TG_LO*divider_val/100000) *
- (MXL_Ceiling(state->Fxtal, 1000000) * 100) /
- (state->Fxtal/1000);
-
- status += MXL_ControlWrite(fe, TG_DIV_VAL, tg_divval);
-
- if (state->TG_LO > 600000000UL)
- status += MXL_ControlWrite(fe, TG_DIV_VAL, tg_divval + 1);
-
- Fmax = 1800000000UL ;
- Fmin = 1200000000UL ;
-
- /* prevent overflow of 32 bit unsigned integer, use
- * following equation. Edit for v2.6.4
- */
- /* Fref_TF = Fref_TG * 1000 */
- Fref_TG = (state->Fxtal/1000) / MXL_Ceiling(state->Fxtal, 1000000);
-
- /* Fvco = Fvco/10 */
- Fvco = (state->TG_LO/10000) * divider_val * Fref_TG;
-
- tg_lo = (((Fmax/10 - Fvco)/100)*32) / ((Fmax-Fmin)/1000)+8;
-
- /* below equation is same as above but much harder to debug.
- *
- * static u32 MXL_GetXtalInt(u32 Xtal_Freq)
- * {
- * if ((Xtal_Freq % 1000000) == 0)
- * return (Xtal_Freq / 10000);
- * else
- * return (((Xtal_Freq / 1000000) + 1)*100);
- * }
- *
- * u32 Xtal_Int = MXL_GetXtalInt(state->Fxtal);
- * tg_lo = ( ((Fmax/10000 * Xtal_Int)/100) -
- * ((state->TG_LO/10000)*divider_val *
- * (state->Fxtal/10000)/100) )*32/((Fmax-Fmin)/10000 *
- * Xtal_Int/100) + 8;
- */
-
- status += MXL_ControlWrite(fe, TG_VCO_BIAS , tg_lo);
-
- /* add for 2.6.5 Special setting for QAM */
- if (state->Mod_Type == MXL_QAM) {
- if (state->config->qam_gain != 0)
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN,
- state->config->qam_gain);
- else if (state->RF_IN < 680000000)
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
- else
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 2);
- }
-
- /* Off Chip Tracking Filter Control */
- if (state->TF_Type == MXL_TF_OFF) {
- /* Tracking Filter Off State; turn off all the banks */
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 3, 1); /* Bank1 Off */
- status += MXL_SetGPIO(fe, 1, 1); /* Bank2 Off */
- status += MXL_SetGPIO(fe, 4, 1); /* Bank3 Off */
- }
-
- if (state->TF_Type == MXL_TF_C) /* Tracking Filter type C */ {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_ControlWrite(fe, DAC_DIN_A, 0);
-
- if (state->RF_IN >= 43000000 && state->RF_IN < 150000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
- status += MXL_SetGPIO(fe, 3, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- }
- if (state->RF_IN >= 150000000 && state->RF_IN < 280000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- }
- if (state->RF_IN >= 280000000 && state->RF_IN < 360000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- }
- if (state->RF_IN >= 360000000 && state->RF_IN < 560000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 0);
- }
- if (state->RF_IN >= 560000000 && state->RF_IN < 580000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 29);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 0);
- }
- if (state->RF_IN >= 580000000 && state->RF_IN < 630000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 0);
- }
- if (state->RF_IN >= 630000000 && state->RF_IN < 700000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 16);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- }
- if (state->RF_IN >= 700000000 && state->RF_IN < 760000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 7);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- }
- if (state->RF_IN >= 760000000 && state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- }
- }
-
- if (state->TF_Type == MXL_TF_C_H) {
-
- /* Tracking Filter type C-H for Hauppauge only */
- status += MXL_ControlWrite(fe, DAC_DIN_A, 0);
-
- if (state->RF_IN >= 43000000 && state->RF_IN < 150000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- }
- if (state->RF_IN >= 150000000 && state->RF_IN < 280000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- }
- if (state->RF_IN >= 280000000 && state->RF_IN < 360000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- }
- if (state->RF_IN >= 360000000 && state->RF_IN < 560000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- }
- if (state->RF_IN >= 560000000 && state->RF_IN < 580000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- }
- if (state->RF_IN >= 580000000 && state->RF_IN < 630000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- }
- if (state->RF_IN >= 630000000 && state->RF_IN < 700000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- }
- if (state->RF_IN >= 700000000 && state->RF_IN < 760000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- }
- if (state->RF_IN >= 760000000 && state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- }
- }
-
- if (state->TF_Type == MXL_TF_D) { /* Tracking Filter type D */
-
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
-
- if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 250000000 && state->RF_IN < 310000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 310000000 && state->RF_IN < 360000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 360000000 && state->RF_IN < 470000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 640000000 && state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- }
-
- if (state->TF_Type == MXL_TF_D_L) {
-
- /* Tracking Filter type D-L for Lumanate ONLY change 2.6.3 */
- status += MXL_ControlWrite(fe, DAC_DIN_A, 0);
-
- /* if UHF and terrestrial => Turn off Tracking Filter */
- if (state->RF_IN >= 471000000 &&
- (state->RF_IN - 471000000)%6000000 != 0) {
- /* Turn off all the banks */
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_ControlWrite(fe, AGC_IF, 10);
- } else {
- /* if VHF or cable => Turn on Tracking Filter */
- if (state->RF_IN >= 43000000 &&
- state->RF_IN < 140000000) {
-
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 140000000 &&
- state->RF_IN < 240000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 240000000 &&
- state->RF_IN < 340000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 340000000 &&
- state->RF_IN < 430000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 430000000 &&
- state->RF_IN < 470000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 470000000 &&
- state->RF_IN < 570000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 570000000 &&
- state->RF_IN < 620000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 620000000 &&
- state->RF_IN < 760000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 760000000 &&
- state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- }
- }
-
- if (state->TF_Type == MXL_TF_E) /* Tracking Filter type E */ {
-
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
-
- if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 250000000 && state->RF_IN < 310000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 310000000 && state->RF_IN < 360000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 360000000 && state->RF_IN < 470000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 640000000 && state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- }
-
- if (state->TF_Type == MXL_TF_F) {
-
- /* Tracking Filter type F */
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
-
- if (state->RF_IN >= 43000000 && state->RF_IN < 160000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 160000000 && state->RF_IN < 210000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 210000000 && state->RF_IN < 300000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 300000000 && state->RF_IN < 390000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 390000000 && state->RF_IN < 515000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 515000000 && state->RF_IN < 650000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 650000000 && state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- }
-
- if (state->TF_Type == MXL_TF_E_2) {
-
- /* Tracking Filter type E_2 */
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
-
- if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 250000000 && state->RF_IN < 350000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 400000000 && state->RF_IN < 570000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 570000000 && state->RF_IN < 770000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 770000000 && state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- }
-
- if (state->TF_Type == MXL_TF_G) {
-
- /* Tracking Filter type G add for v2.6.8 */
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
-
- if (state->RF_IN >= 50000000 && state->RF_IN < 190000000) {
-
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 190000000 && state->RF_IN < 280000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 280000000 && state->RF_IN < 350000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 400000000 && state->RF_IN < 470000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 640000000 && state->RF_IN < 820000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 820000000 && state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- }
-
- if (state->TF_Type == MXL_TF_E_NA) {
-
- /* Tracking Filter type E-NA for Empia ONLY change for 2.6.8 */
- status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
-
- /* if UHF and terrestrial=> Turn off Tracking Filter */
- if (state->RF_IN >= 471000000 &&
- (state->RF_IN - 471000000)%6000000 != 0) {
-
- /* Turn off all the banks */
- status += MXL_SetGPIO(fe, 3, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
-
- /* 2.6.12 Turn on RSSI */
- status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
- status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
- status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
-
- /* RSSI reference point */
- status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5);
- status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3);
- status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2);
-
- /* following parameter is from analog OTA mode,
- * can be change to seek better performance */
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
- } else {
- /* if VHF or Cable => Turn on Tracking Filter */
-
- /* 2.6.12 Turn off RSSI */
- status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0);
-
- /* change back from above condition */
- status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 5);
-
-
- if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) {
-
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 0);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 250000000 && state->RF_IN < 350000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 0);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 400000000 && state->RF_IN < 570000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 570000000 && state->RF_IN < 770000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 0);
- }
- if (state->RF_IN >= 770000000 && state->RF_IN <= 900000000) {
- status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
- status += MXL_SetGPIO(fe, 4, 1);
- status += MXL_SetGPIO(fe, 1, 1);
- status += MXL_SetGPIO(fe, 3, 1);
- }
- }
- }
- return status ;
-}
-
-static u16 MXL_SetGPIO(struct dvb_frontend *fe, u8 GPIO_Num, u8 GPIO_Val)
-{
- u16 status = 0;
-
- if (GPIO_Num == 1)
- status += MXL_ControlWrite(fe, GPIO_1B, GPIO_Val ? 0 : 1);
-
- /* GPIO2 is not available */
-
- if (GPIO_Num == 3) {
- if (GPIO_Val == 1) {
- status += MXL_ControlWrite(fe, GPIO_3, 0);
- status += MXL_ControlWrite(fe, GPIO_3B, 0);
- }
- if (GPIO_Val == 0) {
- status += MXL_ControlWrite(fe, GPIO_3, 1);
- status += MXL_ControlWrite(fe, GPIO_3B, 1);
- }
- if (GPIO_Val == 3) { /* tri-state */
- status += MXL_ControlWrite(fe, GPIO_3, 0);
- status += MXL_ControlWrite(fe, GPIO_3B, 1);
- }
- }
- if (GPIO_Num == 4) {
- if (GPIO_Val == 1) {
- status += MXL_ControlWrite(fe, GPIO_4, 0);
- status += MXL_ControlWrite(fe, GPIO_4B, 0);
- }
- if (GPIO_Val == 0) {
- status += MXL_ControlWrite(fe, GPIO_4, 1);
- status += MXL_ControlWrite(fe, GPIO_4B, 1);
- }
- if (GPIO_Val == 3) { /* tri-state */
- status += MXL_ControlWrite(fe, GPIO_4, 0);
- status += MXL_ControlWrite(fe, GPIO_4B, 1);
- }
- }
-
- return status;
-}
-
-static u16 MXL_ControlWrite(struct dvb_frontend *fe, u16 ControlNum, u32 value)
-{
- u16 status = 0;
-
- /* Will write ALL Matching Control Name */
- /* Write Matching INIT Control */
- status += MXL_ControlWrite_Group(fe, ControlNum, value, 1);
- /* Write Matching CH Control */
- status += MXL_ControlWrite_Group(fe, ControlNum, value, 2);
-#ifdef _MXL_INTERNAL
- /* Write Matching MXL Control */
- status += MXL_ControlWrite_Group(fe, ControlNum, value, 3);
-#endif
- return status;
-}
-
-static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum,
- u32 value, u16 controlGroup)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u16 i, j, k;
- u32 highLimit;
- u32 ctrlVal;
-
- if (controlGroup == 1) /* Initial Control */ {
-
- for (i = 0; i < state->Init_Ctrl_Num; i++) {
-
- if (controlNum == state->Init_Ctrl[i].Ctrl_Num) {
-
- highLimit = 1 << state->Init_Ctrl[i].size;
- if (value < highLimit) {
- for (j = 0; j < state->Init_Ctrl[i].size; j++) {
- state->Init_Ctrl[i].val[j] = (u8)((value >> j) & 0x01);
- MXL_RegWriteBit(fe, (u8)(state->Init_Ctrl[i].addr[j]),
- (u8)(state->Init_Ctrl[i].bit[j]),
- (u8)((value>>j) & 0x01));
- }
- ctrlVal = 0;
- for (k = 0; k < state->Init_Ctrl[i].size; k++)
- ctrlVal += state->Init_Ctrl[i].val[k] * (1 << k);
- } else
- return -1;
- }
- }
- }
- if (controlGroup == 2) /* Chan change Control */ {
-
- for (i = 0; i < state->CH_Ctrl_Num; i++) {
-
- if (controlNum == state->CH_Ctrl[i].Ctrl_Num) {
-
- highLimit = 1 << state->CH_Ctrl[i].size;
- if (value < highLimit) {
- for (j = 0; j < state->CH_Ctrl[i].size; j++) {
- state->CH_Ctrl[i].val[j] = (u8)((value >> j) & 0x01);
- MXL_RegWriteBit(fe, (u8)(state->CH_Ctrl[i].addr[j]),
- (u8)(state->CH_Ctrl[i].bit[j]),
- (u8)((value>>j) & 0x01));
- }
- ctrlVal = 0;
- for (k = 0; k < state->CH_Ctrl[i].size; k++)
- ctrlVal += state->CH_Ctrl[i].val[k] * (1 << k);
- } else
- return -1;
- }
- }
- }
-#ifdef _MXL_INTERNAL
- if (controlGroup == 3) /* Maxlinear Control */ {
-
- for (i = 0; i < state->MXL_Ctrl_Num; i++) {
-
- if (controlNum == state->MXL_Ctrl[i].Ctrl_Num) {
-
- highLimit = (1 << state->MXL_Ctrl[i].size);
- if (value < highLimit) {
- for (j = 0; j < state->MXL_Ctrl[i].size; j++) {
- state->MXL_Ctrl[i].val[j] = (u8)((value >> j) & 0x01);
- MXL_RegWriteBit(fe, (u8)(state->MXL_Ctrl[i].addr[j]),
- (u8)(state->MXL_Ctrl[i].bit[j]),
- (u8)((value>>j) & 0x01));
- }
- ctrlVal = 0;
- for (k = 0; k < state->MXL_Ctrl[i].size; k++)
- ctrlVal += state->
- MXL_Ctrl[i].val[k] *
- (1 << k);
- } else
- return -1;
- }
- }
- }
-#endif
- return 0 ; /* successful return */
-}
-
-static u16 MXL_RegRead(struct dvb_frontend *fe, u8 RegNum, u8 *RegVal)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- int i ;
-
- for (i = 0; i < 104; i++) {
- if (RegNum == state->TunerRegs[i].Reg_Num) {
- *RegVal = (u8)(state->TunerRegs[i].Reg_Val);
- return 0;
- }
- }
-
- return 1;
-}
-
-static u16 MXL_ControlRead(struct dvb_frontend *fe, u16 controlNum, u32 *value)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u32 ctrlVal ;
- u16 i, k ;
-
- for (i = 0; i < state->Init_Ctrl_Num ; i++) {
-
- if (controlNum == state->Init_Ctrl[i].Ctrl_Num) {
-
- ctrlVal = 0;
- for (k = 0; k < state->Init_Ctrl[i].size; k++)
- ctrlVal += state->Init_Ctrl[i].val[k] * (1<<k);
- *value = ctrlVal;
- return 0;
- }
- }
-
- for (i = 0; i < state->CH_Ctrl_Num ; i++) {
-
- if (controlNum == state->CH_Ctrl[i].Ctrl_Num) {
-
- ctrlVal = 0;
- for (k = 0; k < state->CH_Ctrl[i].size; k++)
- ctrlVal += state->CH_Ctrl[i].val[k] * (1 << k);
- *value = ctrlVal;
- return 0;
-
- }
- }
-
-#ifdef _MXL_INTERNAL
- for (i = 0; i < state->MXL_Ctrl_Num ; i++) {
-
- if (controlNum == state->MXL_Ctrl[i].Ctrl_Num) {
-
- ctrlVal = 0;
- for (k = 0; k < state->MXL_Ctrl[i].size; k++)
- ctrlVal += state->MXL_Ctrl[i].val[k] * (1<<k);
- *value = ctrlVal;
- return 0;
-
- }
- }
-#endif
- return 1;
-}
-
-static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit,
- u8 bitVal)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- int i ;
-
- const u8 AND_MAP[8] = {
- 0xFE, 0xFD, 0xFB, 0xF7,
- 0xEF, 0xDF, 0xBF, 0x7F } ;
-
- const u8 OR_MAP[8] = {
- 0x01, 0x02, 0x04, 0x08,
- 0x10, 0x20, 0x40, 0x80 } ;
-
- for (i = 0; i < state->TunerRegs_Num; i++) {
- if (state->TunerRegs[i].Reg_Num == address) {
- if (bitVal)
- state->TunerRegs[i].Reg_Val |= OR_MAP[bit];
- else
- state->TunerRegs[i].Reg_Val &= AND_MAP[bit];
- break ;
- }
- }
-}
-
-static u32 MXL_Ceiling(u32 value, u32 resolution)
-{
- return value / resolution + (value % resolution > 0 ? 1 : 0);
-}
-
-/* Retrieve the Initialzation Registers */
-static u16 MXL_GetInitRegister(struct dvb_frontend *fe, u8 *RegNum,
- u8 *RegVal, int *count)
-{
- u16 status = 0;
- int i ;
-
- u8 RegAddr[] = {
- 11, 12, 13, 22, 32, 43, 44, 53, 56, 59, 73,
- 76, 77, 91, 134, 135, 137, 147,
- 156, 166, 167, 168, 25 };
-
- *count = ARRAY_SIZE(RegAddr);
-
- status += MXL_BlockInit(fe);
-
- for (i = 0 ; i < *count; i++) {
- RegNum[i] = RegAddr[i];
- status += MXL_RegRead(fe, RegNum[i], &RegVal[i]);
- }
-
- return status;
-}
-
-static u16 MXL_GetCHRegister(struct dvb_frontend *fe, u8 *RegNum, u8 *RegVal,
- int *count)
-{
- u16 status = 0;
- int i ;
-
-/* add 77, 166, 167, 168 register for 2.6.12 */
-#ifdef _MXL_PRODUCTION
- u8 RegAddr[] = {14, 15, 16, 17, 22, 43, 65, 68, 69, 70, 73, 92, 93, 106,
- 107, 108, 109, 110, 111, 112, 136, 138, 149, 77, 166, 167, 168 } ;
-#else
- u8 RegAddr[] = {14, 15, 16, 17, 22, 43, 68, 69, 70, 73, 92, 93, 106,
- 107, 108, 109, 110, 111, 112, 136, 138, 149, 77, 166, 167, 168 } ;
- /*
- u8 RegAddr[171];
- for (i = 0; i <= 170; i++)
- RegAddr[i] = i;
- */
-#endif
-
- *count = ARRAY_SIZE(RegAddr);
-
- for (i = 0 ; i < *count; i++) {
- RegNum[i] = RegAddr[i];
- status += MXL_RegRead(fe, RegNum[i], &RegVal[i]);
- }
-
- return status;
-}
-
-static u16 MXL_GetCHRegister_ZeroIF(struct dvb_frontend *fe, u8 *RegNum,
- u8 *RegVal, int *count)
-{
- u16 status = 0;
- int i;
-
- u8 RegAddr[] = {43, 136};
-
- *count = ARRAY_SIZE(RegAddr);
-
- for (i = 0; i < *count; i++) {
- RegNum[i] = RegAddr[i];
- status += MXL_RegRead(fe, RegNum[i], &RegVal[i]);
- }
-
- return status;
-}
-
-static u16 MXL_GetMasterControl(u8 *MasterReg, int state)
-{
- if (state == 1) /* Load_Start */
- *MasterReg = 0xF3;
- if (state == 2) /* Power_Down */
- *MasterReg = 0x41;
- if (state == 3) /* Synth_Reset */
- *MasterReg = 0xB1;
- if (state == 4) /* Seq_Off */
- *MasterReg = 0xF1;
-
- return 0;
-}
-
-#ifdef _MXL_PRODUCTION
-static u16 MXL_VCORange_Test(struct dvb_frontend *fe, int VCO_Range)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u16 status = 0 ;
-
- if (VCO_Range == 1) {
- status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1);
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_DIVM, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
- if (state->Mode == 0 && state->IF_Mode == 1) {
- /* Analog Low IF Mode */
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 180224);
- }
- if (state->Mode == 0 && state->IF_Mode == 0) {
- /* Analog Zero IF Mode */
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 222822);
- }
- if (state->Mode == 1) /* Digital Mode */ {
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 229376);
- }
- }
-
- if (VCO_Range == 2) {
- status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1);
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_DIVM, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 41);
- if (state->Mode == 0 && state->IF_Mode == 1) {
- /* Analog Low IF Mode */
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 206438);
- }
- if (state->Mode == 0 && state->IF_Mode == 0) {
- /* Analog Zero IF Mode */
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 206438);
- }
- if (state->Mode == 1) /* Digital Mode */ {
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 41);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 16384);
- }
- }
-
- if (VCO_Range == 3) {
- status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1);
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_DIVM, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42);
- if (state->Mode == 0 && state->IF_Mode == 1) {
- /* Analog Low IF Mode */
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 44);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 173670);
- }
- if (state->Mode == 0 && state->IF_Mode == 0) {
- /* Analog Zero IF Mode */
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 44);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 173670);
- }
- if (state->Mode == 1) /* Digital Mode */ {
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 245760);
- }
- }
-
- if (VCO_Range == 4) {
- status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1);
- status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
- status += MXL_ControlWrite(fe, RFSYN_DIVM, 1);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
- status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
- status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27);
- if (state->Mode == 0 && state->IF_Mode == 1) {
- /* Analog Low IF Mode */
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 206438);
- }
- if (state->Mode == 0 && state->IF_Mode == 0) {
- /* Analog Zero IF Mode */
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 206438);
- }
- if (state->Mode == 1) /* Digital Mode */ {
- status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
- status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
- status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27);
- status += MXL_ControlWrite(fe,
- CHCAL_FRAC_MOD_RF, 212992);
- }
- }
-
- return status;
-}
-
-static u16 MXL_Hystersis_Test(struct dvb_frontend *fe, int Hystersis)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u16 status = 0;
-
- if (Hystersis == 1)
- status += MXL_ControlWrite(fe, DN_BYPASS_AGC_I2C, 1);
-
- return status;
-}
-#endif
-/* End: Reference driver code found in the Realtek driver that
- * is copyright MaxLinear */
-
-/* ----------------------------------------------------------------
- * Begin: Everything after here is new code to adapt the
- * proprietary Realtek driver into a Linux API tuner.
- * Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
- */
-static int mxl5005s_reset(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- int ret = 0;
-
- u8 buf[2] = { 0xff, 0x00 };
- struct i2c_msg msg = { .addr = state->config->i2c_address, .flags = 0,
- .buf = buf, .len = 2 };
-
- dprintk(2, "%s()\n", __func__);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- if (i2c_transfer(state->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "mxl5005s I2C reset failed\n");
- ret = -EREMOTEIO;
- }
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return ret;
-}
-
-/* Write a single byte to a single reg, latch the value if required by
- * following the transaction with the latch byte.
- */
-static int mxl5005s_writereg(struct dvb_frontend *fe, u8 reg, u8 val, int latch)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- u8 buf[3] = { reg, val, MXL5005S_LATCH_BYTE };
- struct i2c_msg msg = { .addr = state->config->i2c_address, .flags = 0,
- .buf = buf, .len = 3 };
-
- if (latch == 0)
- msg.len = 2;
-
- dprintk(2, "%s(0x%x, 0x%x, 0x%x)\n", __func__, reg, val, msg.addr);
-
- if (i2c_transfer(state->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "mxl5005s I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable,
- u8 *datatable, u8 len)
-{
- int ret = 0, i;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- for (i = 0 ; i < len-1; i++) {
- ret = mxl5005s_writereg(fe, addrtable[i], datatable[i], 0);
- if (ret < 0)
- break;
- }
-
- ret = mxl5005s_writereg(fe, addrtable[i], datatable[i], 1);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return ret;
-}
-
-static int mxl5005s_init(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
-
- dprintk(1, "%s()\n", __func__);
- state->current_mode = MXL_QAM;
- return mxl5005s_reconfigure(fe, MXL_QAM, MXL5005S_BANDWIDTH_6MHZ);
-}
-
-static int mxl5005s_reconfigure(struct dvb_frontend *fe, u32 mod_type,
- u32 bandwidth)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
-
- u8 AddrTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX];
- u8 ByteTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX];
- int TableLen;
-
- dprintk(1, "%s(type=%d, bw=%d)\n", __func__, mod_type, bandwidth);
-
- mxl5005s_reset(fe);
-
- /* Tuner initialization stage 0 */
- MXL_GetMasterControl(ByteTable, MC_SYNTH_RESET);
- AddrTable[0] = MASTER_CONTROL_ADDR;
- ByteTable[0] |= state->config->AgcMasterByte;
-
- mxl5005s_writeregs(fe, AddrTable, ByteTable, 1);
-
- mxl5005s_AssignTunerMode(fe, mod_type, bandwidth);
-
- /* Tuner initialization stage 1 */
- MXL_GetInitRegister(fe, AddrTable, ByteTable, &TableLen);
-
- mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen);
-
- return 0;
-}
-
-static int mxl5005s_AssignTunerMode(struct dvb_frontend *fe, u32 mod_type,
- u32 bandwidth)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- struct mxl5005s_config *c = state->config;
-
- InitTunerControls(fe);
-
- /* Set MxL5005S parameters. */
- MXL5005_TunerConfig(
- fe,
- c->mod_mode,
- c->if_mode,
- bandwidth,
- c->if_freq,
- c->xtal_freq,
- c->agc_mode,
- c->top,
- c->output_load,
- c->clock_out,
- c->div_out,
- c->cap_select,
- c->rssi_enable,
- mod_type,
- c->tracking_filter);
-
- return 0;
-}
-
-static int mxl5005s_set_params(struct dvb_frontend *fe)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 delsys = c->delivery_system;
- u32 bw = c->bandwidth_hz;
- u32 req_mode, req_bw = 0;
- int ret;
-
- dprintk(1, "%s()\n", __func__);
-
- switch (delsys) {
- case SYS_ATSC:
- req_mode = MXL_ATSC;
- req_bw = MXL5005S_BANDWIDTH_6MHZ;
- break;
- case SYS_DVBC_ANNEX_B:
- req_mode = MXL_QAM;
- req_bw = MXL5005S_BANDWIDTH_6MHZ;
- break;
- default: /* Assume DVB-T */
- req_mode = MXL_DVBT;
- switch (bw) {
- case 6000000:
- req_bw = MXL5005S_BANDWIDTH_6MHZ;
- break;
- case 7000000:
- req_bw = MXL5005S_BANDWIDTH_7MHZ;
- break;
- case 8000000:
- case 0:
- req_bw = MXL5005S_BANDWIDTH_8MHZ;
- break;
- default:
- return -EINVAL;
- }
- }
-
- /* Change tuner for new modulation type if reqd */
- if (req_mode != state->current_mode ||
- req_bw != state->Chan_Bandwidth) {
- state->current_mode = req_mode;
- ret = mxl5005s_reconfigure(fe, req_mode, req_bw);
-
- } else
- ret = 0;
-
- if (ret == 0) {
- dprintk(1, "%s() freq=%d\n", __func__, c->frequency);
- ret = mxl5005s_SetRfFreqHz(fe, c->frequency);
- }
-
- return ret;
-}
-
-static int mxl5005s_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- dprintk(1, "%s()\n", __func__);
-
- *frequency = state->RF_IN;
-
- return 0;
-}
-
-static int mxl5005s_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct mxl5005s_state *state = fe->tuner_priv;
- dprintk(1, "%s()\n", __func__);
-
- *bandwidth = state->Chan_Bandwidth;
-
- return 0;
-}
-
-static int mxl5005s_release(struct dvb_frontend *fe)
-{
- dprintk(1, "%s()\n", __func__);
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static const struct dvb_tuner_ops mxl5005s_tuner_ops = {
- .info = {
- .name = "MaxLinear MXL5005S",
- .frequency_min = 48000000,
- .frequency_max = 860000000,
- .frequency_step = 50000,
- },
-
- .release = mxl5005s_release,
- .init = mxl5005s_init,
-
- .set_params = mxl5005s_set_params,
- .get_frequency = mxl5005s_get_frequency,
- .get_bandwidth = mxl5005s_get_bandwidth,
-};
-
-struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct mxl5005s_config *config)
-{
- struct mxl5005s_state *state = NULL;
- dprintk(1, "%s()\n", __func__);
-
- state = kzalloc(sizeof(struct mxl5005s_state), GFP_KERNEL);
- if (state == NULL)
- return NULL;
-
- state->frontend = fe;
- state->config = config;
- state->i2c = i2c;
-
- printk(KERN_INFO "MXL5005S: Attached at address 0x%02x\n",
- config->i2c_address);
-
- memcpy(&fe->ops.tuner_ops, &mxl5005s_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- fe->tuner_priv = state;
- return fe;
-}
-EXPORT_SYMBOL(mxl5005s_attach);
-
-MODULE_DESCRIPTION("MaxLinear MXL5005S silicon tuner driver");
-MODULE_AUTHOR("Steven Toth");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/mxl5005s.h b/drivers/media/common/tuners/mxl5005s.h
deleted file mode 100644
index fc8a1ff..0000000
--- a/drivers/media/common/tuners/mxl5005s.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
-
- Copyright (C) 2008 MaxLinear
- Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef __MXL5005S_H
-#define __MXL5005S_H
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-struct mxl5005s_config {
-
- /* 7 bit i2c address */
- u8 i2c_address;
-
-#define IF_FREQ_4570000HZ 4570000
-#define IF_FREQ_4571429HZ 4571429
-#define IF_FREQ_5380000HZ 5380000
-#define IF_FREQ_36000000HZ 36000000
-#define IF_FREQ_36125000HZ 36125000
-#define IF_FREQ_36166667HZ 36166667
-#define IF_FREQ_44000000HZ 44000000
- u32 if_freq;
-
-#define CRYSTAL_FREQ_4000000HZ 4000000
-#define CRYSTAL_FREQ_16000000HZ 16000000
-#define CRYSTAL_FREQ_25000000HZ 25000000
-#define CRYSTAL_FREQ_28800000HZ 28800000
- u32 xtal_freq;
-
-#define MXL_DUAL_AGC 0
-#define MXL_SINGLE_AGC 1
- u8 agc_mode;
-
-#define MXL_TF_DEFAULT 0
-#define MXL_TF_OFF 1
-#define MXL_TF_C 2
-#define MXL_TF_C_H 3
-#define MXL_TF_D 4
-#define MXL_TF_D_L 5
-#define MXL_TF_E 6
-#define MXL_TF_F 7
-#define MXL_TF_E_2 8
-#define MXL_TF_E_NA 9
-#define MXL_TF_G 10
- u8 tracking_filter;
-
-#define MXL_RSSI_DISABLE 0
-#define MXL_RSSI_ENABLE 1
- u8 rssi_enable;
-
-#define MXL_CAP_SEL_DISABLE 0
-#define MXL_CAP_SEL_ENABLE 1
- u8 cap_select;
-
-#define MXL_DIV_OUT_1 0
-#define MXL_DIV_OUT_4 1
- u8 div_out;
-
-#define MXL_CLOCK_OUT_DISABLE 0
-#define MXL_CLOCK_OUT_ENABLE 1
- u8 clock_out;
-
-#define MXL5005S_IF_OUTPUT_LOAD_200_OHM 200
-#define MXL5005S_IF_OUTPUT_LOAD_300_OHM 300
- u32 output_load;
-
-#define MXL5005S_TOP_5P5 55
-#define MXL5005S_TOP_7P2 72
-#define MXL5005S_TOP_9P2 92
-#define MXL5005S_TOP_11P0 110
-#define MXL5005S_TOP_12P9 129
-#define MXL5005S_TOP_14P7 147
-#define MXL5005S_TOP_16P8 168
-#define MXL5005S_TOP_19P4 194
-#define MXL5005S_TOP_21P2 212
-#define MXL5005S_TOP_23P2 232
-#define MXL5005S_TOP_25P2 252
-#define MXL5005S_TOP_27P1 271
-#define MXL5005S_TOP_29P2 292
-#define MXL5005S_TOP_31P7 317
-#define MXL5005S_TOP_34P9 349
- u32 top;
-
-#define MXL_ANALOG_MODE 0
-#define MXL_DIGITAL_MODE 1
- u8 mod_mode;
-
-#define MXL_ZERO_IF 0
-#define MXL_LOW_IF 1
- u8 if_mode;
-
- /* Some boards need to override the built-in logic for determining
- the gain when in QAM mode (the HVR-1600 is one such case) */
- u8 qam_gain;
-
- /* Stuff I don't know what to do with */
- u8 AgcMasterByte;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_MXL5005S) || \
- (defined(CONFIG_MEDIA_TUNER_MXL5005S_MODULE) && defined(MODULE))
-extern struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct mxl5005s_config *config);
-#else
-static inline struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct mxl5005s_config *config)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif /* CONFIG_DVB_TUNER_MXL5005S */
-
-#endif /* __MXL5005S_H */
-
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c
deleted file mode 100644
index 69e453e..0000000
--- a/drivers/media/common/tuners/mxl5007t.c
+++ /dev/null
@@ -1,928 +0,0 @@
-/*
- * mxl5007t.c - driver for the MaxLinear MxL5007T silicon tuner
- *
- * Copyright (C) 2008, 2009 Michael Krufky <mkrufky@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-#include "tuner-i2c.h"
-#include "mxl5007t.h"
-
-static DEFINE_MUTEX(mxl5007t_list_mutex);
-static LIST_HEAD(hybrid_tuner_instance_list);
-
-static int mxl5007t_debug;
-module_param_named(debug, mxl5007t_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level");
-
-/* ------------------------------------------------------------------------- */
-
-#define mxl_printk(kern, fmt, arg...) \
- printk(kern "%s: " fmt "\n", __func__, ##arg)
-
-#define mxl_err(fmt, arg...) \
- mxl_printk(KERN_ERR, "%d: " fmt, __LINE__, ##arg)
-
-#define mxl_warn(fmt, arg...) \
- mxl_printk(KERN_WARNING, fmt, ##arg)
-
-#define mxl_info(fmt, arg...) \
- mxl_printk(KERN_INFO, fmt, ##arg)
-
-#define mxl_debug(fmt, arg...) \
-({ \
- if (mxl5007t_debug) \
- mxl_printk(KERN_DEBUG, fmt, ##arg); \
-})
-
-#define mxl_fail(ret) \
-({ \
- int __ret; \
- __ret = (ret < 0); \
- if (__ret) \
- mxl_printk(KERN_ERR, "error %d on line %d", \
- ret, __LINE__); \
- __ret; \
-})
-
-/* ------------------------------------------------------------------------- */
-
-#define MHz 1000000
-
-enum mxl5007t_mode {
- MxL_MODE_ISDBT = 0,
- MxL_MODE_DVBT = 1,
- MxL_MODE_ATSC = 2,
- MxL_MODE_CABLE = 0x10,
-};
-
-enum mxl5007t_chip_version {
- MxL_UNKNOWN_ID = 0x00,
- MxL_5007_V1_F1 = 0x11,
- MxL_5007_V1_F2 = 0x12,
- MxL_5007_V4 = 0x14,
- MxL_5007_V2_100_F1 = 0x21,
- MxL_5007_V2_100_F2 = 0x22,
- MxL_5007_V2_200_F1 = 0x23,
- MxL_5007_V2_200_F2 = 0x24,
-};
-
-struct reg_pair_t {
- u8 reg;
- u8 val;
-};
-
-/* ------------------------------------------------------------------------- */
-
-static struct reg_pair_t init_tab[] = {
- { 0x02, 0x06 },
- { 0x03, 0x48 },
- { 0x05, 0x04 },
- { 0x06, 0x10 },
- { 0x2e, 0x15 }, /* OVERRIDE */
- { 0x30, 0x10 }, /* OVERRIDE */
- { 0x45, 0x58 }, /* OVERRIDE */
- { 0x48, 0x19 }, /* OVERRIDE */
- { 0x52, 0x03 }, /* OVERRIDE */
- { 0x53, 0x44 }, /* OVERRIDE */
- { 0x6a, 0x4b }, /* OVERRIDE */
- { 0x76, 0x00 }, /* OVERRIDE */
- { 0x78, 0x18 }, /* OVERRIDE */
- { 0x7a, 0x17 }, /* OVERRIDE */
- { 0x85, 0x06 }, /* OVERRIDE */
- { 0x01, 0x01 }, /* TOP_MASTER_ENABLE */
- { 0, 0 }
-};
-
-static struct reg_pair_t init_tab_cable[] = {
- { 0x02, 0x06 },
- { 0x03, 0x48 },
- { 0x05, 0x04 },
- { 0x06, 0x10 },
- { 0x09, 0x3f },
- { 0x0a, 0x3f },
- { 0x0b, 0x3f },
- { 0x2e, 0x15 }, /* OVERRIDE */
- { 0x30, 0x10 }, /* OVERRIDE */
- { 0x45, 0x58 }, /* OVERRIDE */
- { 0x48, 0x19 }, /* OVERRIDE */
- { 0x52, 0x03 }, /* OVERRIDE */
- { 0x53, 0x44 }, /* OVERRIDE */
- { 0x6a, 0x4b }, /* OVERRIDE */
- { 0x76, 0x00 }, /* OVERRIDE */
- { 0x78, 0x18 }, /* OVERRIDE */
- { 0x7a, 0x17 }, /* OVERRIDE */
- { 0x85, 0x06 }, /* OVERRIDE */
- { 0x01, 0x01 }, /* TOP_MASTER_ENABLE */
- { 0, 0 }
-};
-
-/* ------------------------------------------------------------------------- */
-
-static struct reg_pair_t reg_pair_rftune[] = {
- { 0x0f, 0x00 }, /* abort tune */
- { 0x0c, 0x15 },
- { 0x0d, 0x40 },
- { 0x0e, 0x0e },
- { 0x1f, 0x87 }, /* OVERRIDE */
- { 0x20, 0x1f }, /* OVERRIDE */
- { 0x21, 0x87 }, /* OVERRIDE */
- { 0x22, 0x1f }, /* OVERRIDE */
- { 0x80, 0x01 }, /* freq dependent */
- { 0x0f, 0x01 }, /* start tune */
- { 0, 0 }
-};
-
-/* ------------------------------------------------------------------------- */
-
-struct mxl5007t_state {
- struct list_head hybrid_tuner_instance_list;
- struct tuner_i2c_props i2c_props;
-
- struct mutex lock;
-
- struct mxl5007t_config *config;
-
- enum mxl5007t_chip_version chip_id;
-
- struct reg_pair_t tab_init[ARRAY_SIZE(init_tab)];
- struct reg_pair_t tab_init_cable[ARRAY_SIZE(init_tab_cable)];
- struct reg_pair_t tab_rftune[ARRAY_SIZE(reg_pair_rftune)];
-
- enum mxl5007t_if_freq if_freq;
-
- u32 frequency;
- u32 bandwidth;
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* called by _init and _rftun to manipulate the register arrays */
-
-static void set_reg_bits(struct reg_pair_t *reg_pair, u8 reg, u8 mask, u8 val)
-{
- unsigned int i = 0;
-
- while (reg_pair[i].reg || reg_pair[i].val) {
- if (reg_pair[i].reg == reg) {
- reg_pair[i].val &= ~mask;
- reg_pair[i].val |= val;
- }
- i++;
-
- }
- return;
-}
-
-static void copy_reg_bits(struct reg_pair_t *reg_pair1,
- struct reg_pair_t *reg_pair2)
-{
- unsigned int i, j;
-
- i = j = 0;
-
- while (reg_pair1[i].reg || reg_pair1[i].val) {
- while (reg_pair2[j].reg || reg_pair2[j].val) {
- if (reg_pair1[i].reg != reg_pair2[j].reg) {
- j++;
- continue;
- }
- reg_pair2[j].val = reg_pair1[i].val;
- break;
- }
- i++;
- }
- return;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void mxl5007t_set_mode_bits(struct mxl5007t_state *state,
- enum mxl5007t_mode mode,
- s32 if_diff_out_level)
-{
- switch (mode) {
- case MxL_MODE_ATSC:
- set_reg_bits(state->tab_init, 0x06, 0x1f, 0x12);
- break;
- case MxL_MODE_DVBT:
- set_reg_bits(state->tab_init, 0x06, 0x1f, 0x11);
- break;
- case MxL_MODE_ISDBT:
- set_reg_bits(state->tab_init, 0x06, 0x1f, 0x10);
- break;
- case MxL_MODE_CABLE:
- set_reg_bits(state->tab_init_cable, 0x09, 0xff, 0xc1);
- set_reg_bits(state->tab_init_cable, 0x0a, 0xff,
- 8 - if_diff_out_level);
- set_reg_bits(state->tab_init_cable, 0x0b, 0xff, 0x17);
- break;
- default:
- mxl_fail(-EINVAL);
- }
- return;
-}
-
-static void mxl5007t_set_if_freq_bits(struct mxl5007t_state *state,
- enum mxl5007t_if_freq if_freq,
- int invert_if)
-{
- u8 val;
-
- switch (if_freq) {
- case MxL_IF_4_MHZ:
- val = 0x00;
- break;
- case MxL_IF_4_5_MHZ:
- val = 0x02;
- break;
- case MxL_IF_4_57_MHZ:
- val = 0x03;
- break;
- case MxL_IF_5_MHZ:
- val = 0x04;
- break;
- case MxL_IF_5_38_MHZ:
- val = 0x05;
- break;
- case MxL_IF_6_MHZ:
- val = 0x06;
- break;
- case MxL_IF_6_28_MHZ:
- val = 0x07;
- break;
- case MxL_IF_9_1915_MHZ:
- val = 0x08;
- break;
- case MxL_IF_35_25_MHZ:
- val = 0x09;
- break;
- case MxL_IF_36_15_MHZ:
- val = 0x0a;
- break;
- case MxL_IF_44_MHZ:
- val = 0x0b;
- break;
- default:
- mxl_fail(-EINVAL);
- return;
- }
- set_reg_bits(state->tab_init, 0x02, 0x0f, val);
-
- /* set inverted IF or normal IF */
- set_reg_bits(state->tab_init, 0x02, 0x10, invert_if ? 0x10 : 0x00);
-
- state->if_freq = if_freq;
-
- return;
-}
-
-static void mxl5007t_set_xtal_freq_bits(struct mxl5007t_state *state,
- enum mxl5007t_xtal_freq xtal_freq)
-{
- switch (xtal_freq) {
- case MxL_XTAL_16_MHZ:
- /* select xtal freq & ref freq */
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x00);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x00);
- break;
- case MxL_XTAL_20_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x10);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x01);
- break;
- case MxL_XTAL_20_25_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x20);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x02);
- break;
- case MxL_XTAL_20_48_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x30);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x03);
- break;
- case MxL_XTAL_24_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x40);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x04);
- break;
- case MxL_XTAL_25_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x50);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x05);
- break;
- case MxL_XTAL_25_14_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x60);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x06);
- break;
- case MxL_XTAL_27_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x70);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x07);
- break;
- case MxL_XTAL_28_8_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x80);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x08);
- break;
- case MxL_XTAL_32_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0x90);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x09);
- break;
- case MxL_XTAL_40_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0xa0);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0a);
- break;
- case MxL_XTAL_44_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0xb0);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0b);
- break;
- case MxL_XTAL_48_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0xc0);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0c);
- break;
- case MxL_XTAL_49_3811_MHZ:
- set_reg_bits(state->tab_init, 0x03, 0xf0, 0xd0);
- set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0d);
- break;
- default:
- mxl_fail(-EINVAL);
- return;
- }
-
- return;
-}
-
-static struct reg_pair_t *mxl5007t_calc_init_regs(struct mxl5007t_state *state,
- enum mxl5007t_mode mode)
-{
- struct mxl5007t_config *cfg = state->config;
-
- memcpy(&state->tab_init, &init_tab, sizeof(init_tab));
- memcpy(&state->tab_init_cable, &init_tab_cable, sizeof(init_tab_cable));
-
- mxl5007t_set_mode_bits(state, mode, cfg->if_diff_out_level);
- mxl5007t_set_if_freq_bits(state, cfg->if_freq_hz, cfg->invert_if);
- mxl5007t_set_xtal_freq_bits(state, cfg->xtal_freq_hz);
-
- set_reg_bits(state->tab_init, 0x04, 0x01, cfg->loop_thru_enable);
- set_reg_bits(state->tab_init, 0x03, 0x08, cfg->clk_out_enable << 3);
- set_reg_bits(state->tab_init, 0x03, 0x07, cfg->clk_out_amp);
-
- if (mode >= MxL_MODE_CABLE) {
- copy_reg_bits(state->tab_init, state->tab_init_cable);
- return state->tab_init_cable;
- } else
- return state->tab_init;
-}
-
-/* ------------------------------------------------------------------------- */
-
-enum mxl5007t_bw_mhz {
- MxL_BW_6MHz = 6,
- MxL_BW_7MHz = 7,
- MxL_BW_8MHz = 8,
-};
-
-static void mxl5007t_set_bw_bits(struct mxl5007t_state *state,
- enum mxl5007t_bw_mhz bw)
-{
- u8 val;
-
- switch (bw) {
- case MxL_BW_6MHz:
- val = 0x15; /* set DIG_MODEINDEX, DIG_MODEINDEX_A,
- * and DIG_MODEINDEX_CSF */
- break;
- case MxL_BW_7MHz:
- val = 0x2a;
- break;
- case MxL_BW_8MHz:
- val = 0x3f;
- break;
- default:
- mxl_fail(-EINVAL);
- return;
- }
- set_reg_bits(state->tab_rftune, 0x0c, 0x3f, val);
-
- return;
-}
-
-static struct
-reg_pair_t *mxl5007t_calc_rf_tune_regs(struct mxl5007t_state *state,
- u32 rf_freq, enum mxl5007t_bw_mhz bw)
-{
- u32 dig_rf_freq = 0;
- u32 temp;
- u32 frac_divider = 1000000;
- unsigned int i;
-
- memcpy(&state->tab_rftune, ®_pair_rftune, sizeof(reg_pair_rftune));
-
- mxl5007t_set_bw_bits(state, bw);
-
- /* Convert RF frequency into 16 bits =>
- * 10 bit integer (MHz) + 6 bit fraction */
- dig_rf_freq = rf_freq / MHz;
-
- temp = rf_freq % MHz;
-
- for (i = 0; i < 6; i++) {
- dig_rf_freq <<= 1;
- frac_divider /= 2;
- if (temp > frac_divider) {
- temp -= frac_divider;
- dig_rf_freq++;
- }
- }
-
- /* add to have shift center point by 7.8124 kHz */
- if (temp > 7812)
- dig_rf_freq++;
-
- set_reg_bits(state->tab_rftune, 0x0d, 0xff, (u8) dig_rf_freq);
- set_reg_bits(state->tab_rftune, 0x0e, 0xff, (u8) (dig_rf_freq >> 8));
-
- if (rf_freq >= 333000000)
- set_reg_bits(state->tab_rftune, 0x80, 0x40, 0x40);
-
- return state->tab_rftune;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static int mxl5007t_write_reg(struct mxl5007t_state *state, u8 reg, u8 val)
-{
- u8 buf[] = { reg, val };
- struct i2c_msg msg = { .addr = state->i2c_props.addr, .flags = 0,
- .buf = buf, .len = 2 };
- int ret;
-
- ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
- if (ret != 1) {
- mxl_err("failed!");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int mxl5007t_write_regs(struct mxl5007t_state *state,
- struct reg_pair_t *reg_pair)
-{
- unsigned int i = 0;
- int ret = 0;
-
- while ((ret == 0) && (reg_pair[i].reg || reg_pair[i].val)) {
- ret = mxl5007t_write_reg(state,
- reg_pair[i].reg, reg_pair[i].val);
- i++;
- }
- return ret;
-}
-
-static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val)
-{
- u8 buf[2] = { 0xfb, reg };
- struct i2c_msg msg[] = {
- { .addr = state->i2c_props.addr, .flags = 0,
- .buf = buf, .len = 2 },
- { .addr = state->i2c_props.addr, .flags = I2C_M_RD,
- .buf = val, .len = 1 },
- };
- int ret;
-
- ret = i2c_transfer(state->i2c_props.adap, msg, 2);
- if (ret != 2) {
- mxl_err("failed!");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int mxl5007t_soft_reset(struct mxl5007t_state *state)
-{
- u8 d = 0xff;
- struct i2c_msg msg = {
- .addr = state->i2c_props.addr, .flags = 0,
- .buf = &d, .len = 1
- };
- int ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
-
- if (ret != 1) {
- mxl_err("failed!");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int mxl5007t_tuner_init(struct mxl5007t_state *state,
- enum mxl5007t_mode mode)
-{
- struct reg_pair_t *init_regs;
- int ret;
-
- ret = mxl5007t_soft_reset(state);
- if (mxl_fail(ret))
- goto fail;
-
- /* calculate initialization reg array */
- init_regs = mxl5007t_calc_init_regs(state, mode);
-
- ret = mxl5007t_write_regs(state, init_regs);
- if (mxl_fail(ret))
- goto fail;
- mdelay(1);
-fail:
- return ret;
-}
-
-static int mxl5007t_tuner_rf_tune(struct mxl5007t_state *state, u32 rf_freq_hz,
- enum mxl5007t_bw_mhz bw)
-{
- struct reg_pair_t *rf_tune_regs;
- int ret;
-
- /* calculate channel change reg array */
- rf_tune_regs = mxl5007t_calc_rf_tune_regs(state, rf_freq_hz, bw);
-
- ret = mxl5007t_write_regs(state, rf_tune_regs);
- if (mxl_fail(ret))
- goto fail;
- msleep(3);
-fail:
- return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static int mxl5007t_synth_lock_status(struct mxl5007t_state *state,
- int *rf_locked, int *ref_locked)
-{
- u8 d;
- int ret;
-
- *rf_locked = 0;
- *ref_locked = 0;
-
- ret = mxl5007t_read_reg(state, 0xd8, &d);
- if (mxl_fail(ret))
- goto fail;
-
- if ((d & 0x0c) == 0x0c)
- *rf_locked = 1;
-
- if ((d & 0x03) == 0x03)
- *ref_locked = 1;
-fail:
- return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
-{
- struct mxl5007t_state *state = fe->tuner_priv;
- int rf_locked, ref_locked, ret;
-
- *status = 0;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- ret = mxl5007t_synth_lock_status(state, &rf_locked, &ref_locked);
- if (mxl_fail(ret))
- goto fail;
- mxl_debug("%s%s", rf_locked ? "rf locked " : "",
- ref_locked ? "ref locked" : "");
-
- if ((rf_locked) || (ref_locked))
- *status |= TUNER_STATUS_LOCKED;
-fail:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static int mxl5007t_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 delsys = c->delivery_system;
- struct mxl5007t_state *state = fe->tuner_priv;
- enum mxl5007t_bw_mhz bw;
- enum mxl5007t_mode mode;
- int ret;
- u32 freq = c->frequency;
-
- switch (delsys) {
- case SYS_ATSC:
- mode = MxL_MODE_ATSC;
- bw = MxL_BW_6MHz;
- break;
- case SYS_DVBC_ANNEX_B:
- mode = MxL_MODE_CABLE;
- bw = MxL_BW_6MHz;
- break;
- case SYS_DVBT:
- case SYS_DVBT2:
- mode = MxL_MODE_DVBT;
- switch (c->bandwidth_hz) {
- case 6000000:
- bw = MxL_BW_6MHz;
- break;
- case 7000000:
- bw = MxL_BW_7MHz;
- break;
- case 8000000:
- bw = MxL_BW_8MHz;
- break;
- default:
- return -EINVAL;
- }
- break;
- default:
- mxl_err("modulation type not supported!");
- return -EINVAL;
- }
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- mutex_lock(&state->lock);
-
- ret = mxl5007t_tuner_init(state, mode);
- if (mxl_fail(ret))
- goto fail;
-
- ret = mxl5007t_tuner_rf_tune(state, freq, bw);
- if (mxl_fail(ret))
- goto fail;
-
- state->frequency = freq;
- state->bandwidth = c->bandwidth_hz;
-fail:
- mutex_unlock(&state->lock);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static int mxl5007t_init(struct dvb_frontend *fe)
-{
- struct mxl5007t_state *state = fe->tuner_priv;
- int ret;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- /* wake from standby */
- ret = mxl5007t_write_reg(state, 0x01, 0x01);
- mxl_fail(ret);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return ret;
-}
-
-static int mxl5007t_sleep(struct dvb_frontend *fe)
-{
- struct mxl5007t_state *state = fe->tuner_priv;
- int ret;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- /* enter standby mode */
- ret = mxl5007t_write_reg(state, 0x01, 0x00);
- mxl_fail(ret);
- ret = mxl5007t_write_reg(state, 0x0f, 0x00);
- mxl_fail(ret);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static int mxl5007t_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct mxl5007t_state *state = fe->tuner_priv;
- *frequency = state->frequency;
- return 0;
-}
-
-static int mxl5007t_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct mxl5007t_state *state = fe->tuner_priv;
- *bandwidth = state->bandwidth;
- return 0;
-}
-
-static int mxl5007t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct mxl5007t_state *state = fe->tuner_priv;
-
- *frequency = 0;
-
- switch (state->if_freq) {
- case MxL_IF_4_MHZ:
- *frequency = 4000000;
- break;
- case MxL_IF_4_5_MHZ:
- *frequency = 4500000;
- break;
- case MxL_IF_4_57_MHZ:
- *frequency = 4570000;
- break;
- case MxL_IF_5_MHZ:
- *frequency = 5000000;
- break;
- case MxL_IF_5_38_MHZ:
- *frequency = 5380000;
- break;
- case MxL_IF_6_MHZ:
- *frequency = 6000000;
- break;
- case MxL_IF_6_28_MHZ:
- *frequency = 6280000;
- break;
- case MxL_IF_9_1915_MHZ:
- *frequency = 9191500;
- break;
- case MxL_IF_35_25_MHZ:
- *frequency = 35250000;
- break;
- case MxL_IF_36_15_MHZ:
- *frequency = 36150000;
- break;
- case MxL_IF_44_MHZ:
- *frequency = 44000000;
- break;
- }
- return 0;
-}
-
-static int mxl5007t_release(struct dvb_frontend *fe)
-{
- struct mxl5007t_state *state = fe->tuner_priv;
-
- mutex_lock(&mxl5007t_list_mutex);
-
- if (state)
- hybrid_tuner_release_state(state);
-
- mutex_unlock(&mxl5007t_list_mutex);
-
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static struct dvb_tuner_ops mxl5007t_tuner_ops = {
- .info = {
- .name = "MaxLinear MxL5007T",
- },
- .init = mxl5007t_init,
- .sleep = mxl5007t_sleep,
- .set_params = mxl5007t_set_params,
- .get_status = mxl5007t_get_status,
- .get_frequency = mxl5007t_get_frequency,
- .get_bandwidth = mxl5007t_get_bandwidth,
- .release = mxl5007t_release,
- .get_if_frequency = mxl5007t_get_if_frequency,
-};
-
-static int mxl5007t_get_chip_id(struct mxl5007t_state *state)
-{
- char *name;
- int ret;
- u8 id;
-
- ret = mxl5007t_read_reg(state, 0xd9, &id);
- if (mxl_fail(ret))
- goto fail;
-
- switch (id) {
- case MxL_5007_V1_F1:
- name = "MxL5007.v1.f1";
- break;
- case MxL_5007_V1_F2:
- name = "MxL5007.v1.f2";
- break;
- case MxL_5007_V2_100_F1:
- name = "MxL5007.v2.100.f1";
- break;
- case MxL_5007_V2_100_F2:
- name = "MxL5007.v2.100.f2";
- break;
- case MxL_5007_V2_200_F1:
- name = "MxL5007.v2.200.f1";
- break;
- case MxL_5007_V2_200_F2:
- name = "MxL5007.v2.200.f2";
- break;
- case MxL_5007_V4:
- name = "MxL5007T.v4";
- break;
- default:
- name = "MxL5007T";
- printk(KERN_WARNING "%s: unknown rev (%02x)\n", __func__, id);
- id = MxL_UNKNOWN_ID;
- }
- state->chip_id = id;
- mxl_info("%s detected @ %d-%04x", name,
- i2c_adapter_id(state->i2c_props.adap),
- state->i2c_props.addr);
- return 0;
-fail:
- mxl_warn("unable to identify device @ %d-%04x",
- i2c_adapter_id(state->i2c_props.adap),
- state->i2c_props.addr);
-
- state->chip_id = MxL_UNKNOWN_ID;
- return ret;
-}
-
-struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, u8 addr,
- struct mxl5007t_config *cfg)
-{
- struct mxl5007t_state *state = NULL;
- int instance, ret;
-
- mutex_lock(&mxl5007t_list_mutex);
- instance = hybrid_tuner_request_state(struct mxl5007t_state, state,
- hybrid_tuner_instance_list,
- i2c, addr, "mxl5007t");
- switch (instance) {
- case 0:
- goto fail;
- case 1:
- /* new tuner instance */
- state->config = cfg;
-
- mutex_init(&state->lock);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- ret = mxl5007t_get_chip_id(state);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- /* check return value of mxl5007t_get_chip_id */
- if (mxl_fail(ret))
- goto fail;
- break;
- default:
- /* existing tuner instance */
- break;
- }
- fe->tuner_priv = state;
- mutex_unlock(&mxl5007t_list_mutex);
-
- memcpy(&fe->ops.tuner_ops, &mxl5007t_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- return fe;
-fail:
- mutex_unlock(&mxl5007t_list_mutex);
-
- mxl5007t_release(fe);
- return NULL;
-}
-EXPORT_SYMBOL_GPL(mxl5007t_attach);
-MODULE_DESCRIPTION("MaxLinear MxL5007T Silicon IC tuner driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.2");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/mxl5007t.h b/drivers/media/common/tuners/mxl5007t.h
deleted file mode 100644
index aa3eea0..0000000
--- a/drivers/media/common/tuners/mxl5007t.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * mxl5007t.h - driver for the MaxLinear MxL5007T silicon tuner
- *
- * Copyright (C) 2008 Michael Krufky <mkrufky@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MXL5007T_H__
-#define __MXL5007T_H__
-
-#include "dvb_frontend.h"
-
-/* ------------------------------------------------------------------------- */
-
-enum mxl5007t_if_freq {
- MxL_IF_4_MHZ, /* 4000000 */
- MxL_IF_4_5_MHZ, /* 4500000 */
- MxL_IF_4_57_MHZ, /* 4570000 */
- MxL_IF_5_MHZ, /* 5000000 */
- MxL_IF_5_38_MHZ, /* 5380000 */
- MxL_IF_6_MHZ, /* 6000000 */
- MxL_IF_6_28_MHZ, /* 6280000 */
- MxL_IF_9_1915_MHZ, /* 9191500 */
- MxL_IF_35_25_MHZ, /* 35250000 */
- MxL_IF_36_15_MHZ, /* 36150000 */
- MxL_IF_44_MHZ, /* 44000000 */
-};
-
-enum mxl5007t_xtal_freq {
- MxL_XTAL_16_MHZ, /* 16000000 */
- MxL_XTAL_20_MHZ, /* 20000000 */
- MxL_XTAL_20_25_MHZ, /* 20250000 */
- MxL_XTAL_20_48_MHZ, /* 20480000 */
- MxL_XTAL_24_MHZ, /* 24000000 */
- MxL_XTAL_25_MHZ, /* 25000000 */
- MxL_XTAL_25_14_MHZ, /* 25140000 */
- MxL_XTAL_27_MHZ, /* 27000000 */
- MxL_XTAL_28_8_MHZ, /* 28800000 */
- MxL_XTAL_32_MHZ, /* 32000000 */
- MxL_XTAL_40_MHZ, /* 40000000 */
- MxL_XTAL_44_MHZ, /* 44000000 */
- MxL_XTAL_48_MHZ, /* 48000000 */
- MxL_XTAL_49_3811_MHZ, /* 49381100 */
-};
-
-enum mxl5007t_clkout_amp {
- MxL_CLKOUT_AMP_0_94V = 0,
- MxL_CLKOUT_AMP_0_53V = 1,
- MxL_CLKOUT_AMP_0_37V = 2,
- MxL_CLKOUT_AMP_0_28V = 3,
- MxL_CLKOUT_AMP_0_23V = 4,
- MxL_CLKOUT_AMP_0_20V = 5,
- MxL_CLKOUT_AMP_0_17V = 6,
- MxL_CLKOUT_AMP_0_15V = 7,
-};
-
-struct mxl5007t_config {
- s32 if_diff_out_level;
- enum mxl5007t_clkout_amp clk_out_amp;
- enum mxl5007t_xtal_freq xtal_freq_hz;
- enum mxl5007t_if_freq if_freq_hz;
- unsigned int invert_if:1;
- unsigned int loop_thru_enable:1;
- unsigned int clk_out_enable:1;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_MXL5007T) || (defined(CONFIG_MEDIA_TUNER_MXL5007T_MODULE) && defined(MODULE))
-extern struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, u8 addr,
- struct mxl5007t_config *cfg);
-#else
-static inline struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- u8 addr,
- struct mxl5007t_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif /* __MXL5007T_H__ */
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
-
diff --git a/drivers/media/common/tuners/qt1010.c b/drivers/media/common/tuners/qt1010.c
deleted file mode 100644
index bdc39e1..0000000
--- a/drivers/media/common/tuners/qt1010.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- * Driver for Quantek QT1010 silicon tuner
- *
- * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
- * Aapo Tahkola <aet@rasterburn.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include "qt1010.h"
-#include "qt1010_priv.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-#define dprintk(args...) \
- do { \
- if (debug) printk(KERN_DEBUG "QT1010: " args); \
- } while (0)
-
-/* read single register */
-static int qt1010_readreg(struct qt1010_priv *priv, u8 reg, u8 *val)
-{
- struct i2c_msg msg[2] = {
- { .addr = priv->cfg->i2c_address,
- .flags = 0, .buf = ®, .len = 1 },
- { .addr = priv->cfg->i2c_address,
- .flags = I2C_M_RD, .buf = val, .len = 1 },
- };
-
- if (i2c_transfer(priv->i2c, msg, 2) != 2) {
- printk(KERN_WARNING "qt1010 I2C read failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-/* write single register */
-static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val)
-{
- u8 buf[2] = { reg, val };
- struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
- .flags = 0, .buf = buf, .len = 2 };
-
- if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
- printk(KERN_WARNING "qt1010 I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
-}
-
-/* dump all registers */
-static void qt1010_dump_regs(struct qt1010_priv *priv)
-{
- u8 reg, val;
-
- for (reg = 0; ; reg++) {
- if (reg % 16 == 0) {
- if (reg)
- printk(KERN_CONT "\n");
- printk(KERN_DEBUG "%02x:", reg);
- }
- if (qt1010_readreg(priv, reg, &val) == 0)
- printk(KERN_CONT " %02x", val);
- else
- printk(KERN_CONT " --");
- if (reg == 0x2f)
- break;
- }
- printk(KERN_CONT "\n");
-}
-
-static int qt1010_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- struct qt1010_priv *priv;
- int err;
- u32 freq, div, mod1, mod2;
- u8 i, tmpval, reg05;
- qt1010_i2c_oper_t rd[48] = {
- { QT1010_WR, 0x01, 0x80 },
- { QT1010_WR, 0x02, 0x3f },
- { QT1010_WR, 0x05, 0xff }, /* 02 c write */
- { QT1010_WR, 0x06, 0x44 },
- { QT1010_WR, 0x07, 0xff }, /* 04 c write */
- { QT1010_WR, 0x08, 0x08 },
- { QT1010_WR, 0x09, 0xff }, /* 06 c write */
- { QT1010_WR, 0x0a, 0xff }, /* 07 c write */
- { QT1010_WR, 0x0b, 0xff }, /* 08 c write */
- { QT1010_WR, 0x0c, 0xe1 },
- { QT1010_WR, 0x1a, 0xff }, /* 10 c write */
- { QT1010_WR, 0x1b, 0x00 },
- { QT1010_WR, 0x1c, 0x89 },
- { QT1010_WR, 0x11, 0xff }, /* 13 c write */
- { QT1010_WR, 0x12, 0xff }, /* 14 c write */
- { QT1010_WR, 0x22, 0xff }, /* 15 c write */
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_WR, 0x1e, 0xd0 },
- { QT1010_RD, 0x22, 0xff }, /* 16 c read */
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_RD, 0x05, 0xff }, /* 20 c read */
- { QT1010_RD, 0x22, 0xff }, /* 21 c read */
- { QT1010_WR, 0x23, 0xd0 },
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_WR, 0x1e, 0xe0 },
- { QT1010_RD, 0x23, 0xff }, /* 25 c read */
- { QT1010_RD, 0x23, 0xff }, /* 26 c read */
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_WR, 0x24, 0xd0 },
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_WR, 0x1e, 0xf0 },
- { QT1010_RD, 0x24, 0xff }, /* 31 c read */
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_WR, 0x14, 0x7f },
- { QT1010_WR, 0x15, 0x7f },
- { QT1010_WR, 0x05, 0xff }, /* 35 c write */
- { QT1010_WR, 0x06, 0x00 },
- { QT1010_WR, 0x15, 0x1f },
- { QT1010_WR, 0x16, 0xff },
- { QT1010_WR, 0x18, 0xff },
- { QT1010_WR, 0x1f, 0xff }, /* 40 c write */
- { QT1010_WR, 0x20, 0xff }, /* 41 c write */
- { QT1010_WR, 0x21, 0x53 },
- { QT1010_WR, 0x25, 0xff }, /* 43 c write */
- { QT1010_WR, 0x26, 0x15 },
- { QT1010_WR, 0x00, 0xff }, /* 45 c write */
- { QT1010_WR, 0x02, 0x00 },
- { QT1010_WR, 0x01, 0x00 }
- };
-
-#define FREQ1 32000000 /* 32 MHz */
-#define FREQ2 4000000 /* 4 MHz Quartz oscillator in the stick? */
-
- priv = fe->tuner_priv;
- freq = c->frequency;
- div = (freq + QT1010_OFFSET) / QT1010_STEP;
- freq = (div * QT1010_STEP) - QT1010_OFFSET;
- mod1 = (freq + QT1010_OFFSET) % FREQ1;
- mod2 = (freq + QT1010_OFFSET) % FREQ2;
- priv->frequency = freq;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
- /* reg 05 base value */
- if (freq < 290000000) reg05 = 0x14; /* 290 MHz */
- else if (freq < 610000000) reg05 = 0x34; /* 610 MHz */
- else if (freq < 802000000) reg05 = 0x54; /* 802 MHz */
- else reg05 = 0x74;
-
- /* 0x5 */
- rd[2].val = reg05;
-
- /* 07 - set frequency: 32 MHz scale */
- rd[4].val = (freq + QT1010_OFFSET) / FREQ1;
-
- /* 09 - changes every 8/24 MHz */
- if (mod1 < 8000000) rd[6].val = 0x1d;
- else rd[6].val = 0x1c;
-
- /* 0a - set frequency: 4 MHz scale (max 28 MHz) */
- if (mod1 < 1*FREQ2) rd[7].val = 0x09; /* +0 MHz */
- else if (mod1 < 2*FREQ2) rd[7].val = 0x08; /* +4 MHz */
- else if (mod1 < 3*FREQ2) rd[7].val = 0x0f; /* +8 MHz */
- else if (mod1 < 4*FREQ2) rd[7].val = 0x0e; /* +12 MHz */
- else if (mod1 < 5*FREQ2) rd[7].val = 0x0d; /* +16 MHz */
- else if (mod1 < 6*FREQ2) rd[7].val = 0x0c; /* +20 MHz */
- else if (mod1 < 7*FREQ2) rd[7].val = 0x0b; /* +24 MHz */
- else rd[7].val = 0x0a; /* +28 MHz */
-
- /* 0b - changes every 2/2 MHz */
- if (mod2 < 2000000) rd[8].val = 0x45;
- else rd[8].val = 0x44;
-
- /* 1a - set frequency: 125 kHz scale (max 3875 kHz)*/
- tmpval = 0x78; /* byte, overflows intentionally */
- rd[10].val = tmpval-((mod2/QT1010_STEP)*0x08);
-
- /* 11 */
- rd[13].val = 0xfd; /* TODO: correct value calculation */
-
- /* 12 */
- rd[14].val = 0x91; /* TODO: correct value calculation */
-
- /* 22 */
- if (freq < 450000000) rd[15].val = 0xd0; /* 450 MHz */
- else if (freq < 482000000) rd[15].val = 0xd1; /* 482 MHz */
- else if (freq < 514000000) rd[15].val = 0xd4; /* 514 MHz */
- else if (freq < 546000000) rd[15].val = 0xd7; /* 546 MHz */
- else if (freq < 610000000) rd[15].val = 0xda; /* 610 MHz */
- else rd[15].val = 0xd0;
-
- /* 05 */
- rd[35].val = (reg05 & 0xf0);
-
- /* 1f */
- if (mod1 < 8000000) tmpval = 0x00;
- else if (mod1 < 12000000) tmpval = 0x01;
- else if (mod1 < 16000000) tmpval = 0x02;
- else if (mod1 < 24000000) tmpval = 0x03;
- else if (mod1 < 28000000) tmpval = 0x04;
- else tmpval = 0x05;
- rd[40].val = (priv->reg1f_init_val + 0x0e + tmpval);
-
- /* 20 */
- if (mod1 < 8000000) tmpval = 0x00;
- else if (mod1 < 12000000) tmpval = 0x01;
- else if (mod1 < 20000000) tmpval = 0x02;
- else if (mod1 < 24000000) tmpval = 0x03;
- else if (mod1 < 28000000) tmpval = 0x04;
- else tmpval = 0x05;
- rd[41].val = (priv->reg20_init_val + 0x0d + tmpval);
-
- /* 25 */
- rd[43].val = priv->reg25_init_val;
-
- /* 00 */
- rd[45].val = 0x92; /* TODO: correct value calculation */
-
- dprintk("freq:%u 05:%02x 07:%02x 09:%02x 0a:%02x 0b:%02x " \
- "1a:%02x 11:%02x 12:%02x 22:%02x 05:%02x 1f:%02x " \
- "20:%02x 25:%02x 00:%02x", \
- freq, rd[2].val, rd[4].val, rd[6].val, rd[7].val, rd[8].val, \
- rd[10].val, rd[13].val, rd[14].val, rd[15].val, rd[35].val, \
- rd[40].val, rd[41].val, rd[43].val, rd[45].val);
-
- for (i = 0; i < ARRAY_SIZE(rd); i++) {
- if (rd[i].oper == QT1010_WR) {
- err = qt1010_writereg(priv, rd[i].reg, rd[i].val);
- } else { /* read is required to proper locking */
- err = qt1010_readreg(priv, rd[i].reg, &tmpval);
- }
- if (err) return err;
- }
-
- if (debug)
- qt1010_dump_regs(priv);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
- return 0;
-}
-
-static int qt1010_init_meas1(struct qt1010_priv *priv,
- u8 oper, u8 reg, u8 reg_init_val, u8 *retval)
-{
- u8 i, val1, val2;
- int err;
-
- qt1010_i2c_oper_t i2c_data[] = {
- { QT1010_WR, reg, reg_init_val },
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_WR, 0x1e, oper },
- { QT1010_RD, reg, 0xff }
- };
-
- for (i = 0; i < ARRAY_SIZE(i2c_data); i++) {
- if (i2c_data[i].oper == QT1010_WR) {
- err = qt1010_writereg(priv, i2c_data[i].reg,
- i2c_data[i].val);
- } else {
- err = qt1010_readreg(priv, i2c_data[i].reg, &val2);
- }
- if (err) return err;
- }
-
- do {
- val1 = val2;
- err = qt1010_readreg(priv, reg, &val2);
- if (err) return err;
- dprintk("compare reg:%02x %02x %02x", reg, val1, val2);
- } while (val1 != val2);
- *retval = val1;
-
- return qt1010_writereg(priv, 0x1e, 0x00);
-}
-
-static int qt1010_init_meas2(struct qt1010_priv *priv,
- u8 reg_init_val, u8 *retval)
-{
- u8 i, val;
- int err;
- qt1010_i2c_oper_t i2c_data[] = {
- { QT1010_WR, 0x07, reg_init_val },
- { QT1010_WR, 0x22, 0xd0 },
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_WR, 0x1e, 0xd0 },
- { QT1010_RD, 0x22, 0xff },
- { QT1010_WR, 0x1e, 0x00 },
- { QT1010_WR, 0x22, 0xff }
- };
- for (i = 0; i < ARRAY_SIZE(i2c_data); i++) {
- if (i2c_data[i].oper == QT1010_WR) {
- err = qt1010_writereg(priv, i2c_data[i].reg,
- i2c_data[i].val);
- } else {
- err = qt1010_readreg(priv, i2c_data[i].reg, &val);
- }
- if (err) return err;
- }
- *retval = val;
- return 0;
-}
-
-static int qt1010_init(struct dvb_frontend *fe)
-{
- struct qt1010_priv *priv = fe->tuner_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- int err = 0;
- u8 i, tmpval, *valptr = NULL;
-
- qt1010_i2c_oper_t i2c_data[] = {
- { QT1010_WR, 0x01, 0x80 },
- { QT1010_WR, 0x0d, 0x84 },
- { QT1010_WR, 0x0e, 0xb7 },
- { QT1010_WR, 0x2a, 0x23 },
- { QT1010_WR, 0x2c, 0xdc },
- { QT1010_M1, 0x25, 0x40 }, /* get reg 25 init value */
- { QT1010_M1, 0x81, 0xff }, /* get reg 25 init value */
- { QT1010_WR, 0x2b, 0x70 },
- { QT1010_WR, 0x2a, 0x23 },
- { QT1010_M1, 0x26, 0x08 },
- { QT1010_M1, 0x82, 0xff },
- { QT1010_WR, 0x05, 0x14 },
- { QT1010_WR, 0x06, 0x44 },
- { QT1010_WR, 0x07, 0x28 },
- { QT1010_WR, 0x08, 0x0b },
- { QT1010_WR, 0x11, 0xfd },
- { QT1010_M1, 0x22, 0x0d },
- { QT1010_M1, 0xd0, 0xff },
- { QT1010_WR, 0x06, 0x40 },
- { QT1010_WR, 0x16, 0xf0 },
- { QT1010_WR, 0x02, 0x38 },
- { QT1010_WR, 0x03, 0x18 },
- { QT1010_WR, 0x20, 0xe0 },
- { QT1010_M1, 0x1f, 0x20 }, /* get reg 1f init value */
- { QT1010_M1, 0x84, 0xff }, /* get reg 1f init value */
- { QT1010_RD, 0x20, 0x20 }, /* get reg 20 init value */
- { QT1010_WR, 0x03, 0x19 },
- { QT1010_WR, 0x02, 0x3f },
- { QT1010_WR, 0x21, 0x53 },
- { QT1010_RD, 0x21, 0xff },
- { QT1010_WR, 0x11, 0xfd },
- { QT1010_WR, 0x05, 0x34 },
- { QT1010_WR, 0x06, 0x44 },
- { QT1010_WR, 0x08, 0x08 }
- };
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
- for (i = 0; i < ARRAY_SIZE(i2c_data); i++) {
- switch (i2c_data[i].oper) {
- case QT1010_WR:
- err = qt1010_writereg(priv, i2c_data[i].reg,
- i2c_data[i].val);
- break;
- case QT1010_RD:
- if (i2c_data[i].val == 0x20)
- valptr = &priv->reg20_init_val;
- else
- valptr = &tmpval;
- err = qt1010_readreg(priv, i2c_data[i].reg, valptr);
- break;
- case QT1010_M1:
- if (i2c_data[i].val == 0x25)
- valptr = &priv->reg25_init_val;
- else if (i2c_data[i].val == 0x1f)
- valptr = &priv->reg1f_init_val;
- else
- valptr = &tmpval;
- err = qt1010_init_meas1(priv, i2c_data[i+1].reg,
- i2c_data[i].reg,
- i2c_data[i].val, valptr);
- i++;
- break;
- }
- if (err) return err;
- }
-
- for (i = 0x31; i < 0x3a; i++) /* 0x31 - 0x39 */
- if ((err = qt1010_init_meas2(priv, i, &tmpval)))
- return err;
-
- c->frequency = 545000000; /* Sigmatek DVB-110 545000000 */
- /* MSI Megasky 580 GL861 533000000 */
- return qt1010_set_params(fe);
-}
-
-static int qt1010_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static int qt1010_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct qt1010_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static int qt1010_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- *frequency = 36125000;
- return 0;
-}
-
-static const struct dvb_tuner_ops qt1010_tuner_ops = {
- .info = {
- .name = "Quantek QT1010",
- .frequency_min = QT1010_MIN_FREQ,
- .frequency_max = QT1010_MAX_FREQ,
- .frequency_step = QT1010_STEP,
- },
-
- .release = qt1010_release,
- .init = qt1010_init,
- /* TODO: implement sleep */
-
- .set_params = qt1010_set_params,
- .get_frequency = qt1010_get_frequency,
- .get_if_frequency = qt1010_get_if_frequency,
-};
-
-struct dvb_frontend * qt1010_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct qt1010_config *cfg)
-{
- struct qt1010_priv *priv = NULL;
- u8 id;
-
- priv = kzalloc(sizeof(struct qt1010_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->cfg = cfg;
- priv->i2c = i2c;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
-
-
- /* Try to detect tuner chip. Probably this is not correct register. */
- if (qt1010_readreg(priv, 0x29, &id) != 0 || (id != 0x39)) {
- kfree(priv);
- return NULL;
- }
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
-
- printk(KERN_INFO "Quantek QT1010 successfully identified.\n");
- memcpy(&fe->ops.tuner_ops, &qt1010_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- fe->tuner_priv = priv;
- return fe;
-}
-EXPORT_SYMBOL(qt1010_attach);
-
-MODULE_DESCRIPTION("Quantek QT1010 silicon tuner driver");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/qt1010.h b/drivers/media/common/tuners/qt1010.h
deleted file mode 100644
index 807fb7b..0000000
--- a/drivers/media/common/tuners/qt1010.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Driver for Quantek QT1010 silicon tuner
- *
- * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
- * Aapo Tahkola <aet@rasterburn.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef QT1010_H
-#define QT1010_H
-
-#include "dvb_frontend.h"
-
-struct qt1010_config {
- u8 i2c_address;
-};
-
-/**
- * Attach a qt1010 tuner to the supplied frontend structure.
- *
- * @param fe frontend to attach to
- * @param i2c i2c adapter to use
- * @param cfg tuner hw based configuration
- * @return fe pointer on success, NULL on failure
- */
-#if defined(CONFIG_MEDIA_TUNER_QT1010) || (defined(CONFIG_MEDIA_TUNER_QT1010_MODULE) && defined(MODULE))
-extern struct dvb_frontend *qt1010_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct qt1010_config *cfg);
-#else
-static inline struct dvb_frontend *qt1010_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct qt1010_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif // CONFIG_MEDIA_TUNER_QT1010
-
-#endif
diff --git a/drivers/media/common/tuners/qt1010_priv.h b/drivers/media/common/tuners/qt1010_priv.h
deleted file mode 100644
index 2c42d3f..0000000
--- a/drivers/media/common/tuners/qt1010_priv.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Driver for Quantek QT1010 silicon tuner
- *
- * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
- * Aapo Tahkola <aet@rasterburn.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef QT1010_PRIV_H
-#define QT1010_PRIV_H
-
-/*
-reg def meaning
-=== === =======
-00 00 ?
-01 a0 ? operation start/stop; start=80, stop=00
-02 00 ?
-03 19 ?
-04 00 ?
-05 00 ? maybe band selection
-06 00 ?
-07 2b set frequency: 32 MHz scale, n*32 MHz
-08 0b ?
-09 10 ? changes every 8/24 MHz; values 1d/1c
-0a 08 set frequency: 4 MHz scale, n*4 MHz
-0b 41 ? changes every 2/2 MHz; values 45/45
-0c e1 ?
-0d 94 ?
-0e b6 ?
-0f 2c ?
-10 10 ?
-11 f1 ? maybe device specified adjustment
-12 11 ? maybe device specified adjustment
-13 3f ?
-14 1f ?
-15 3f ?
-16 ff ?
-17 ff ?
-18 f7 ?
-19 80 ?
-1a d0 set frequency: 125 kHz scale, n*125 kHz
-1b 00 ?
-1c 89 ?
-1d 00 ?
-1e 00 ? looks like operation register; write cmd here, read result from 1f-26
-1f 20 ? chip initialization
-20 e0 ? chip initialization
-21 20 ?
-22 d0 ?
-23 d0 ?
-24 d0 ?
-25 40 ? chip initialization
-26 08 ?
-27 29 ?
-28 55 ?
-29 39 ?
-2a 13 ?
-2b 01 ?
-2c ea ?
-2d 00 ?
-2e 00 ? not used?
-2f 00 ? not used?
-*/
-
-#define QT1010_STEP 125000 /* 125 kHz used by Windows drivers,
- hw could be more precise but we don't
- know how to use */
-#define QT1010_MIN_FREQ 48000000 /* 48 MHz */
-#define QT1010_MAX_FREQ 860000000 /* 860 MHz */
-#define QT1010_OFFSET 1246000000 /* 1246 MHz */
-
-#define QT1010_WR 0
-#define QT1010_RD 1
-#define QT1010_M1 3
-
-typedef struct {
- u8 oper, reg, val;
-} qt1010_i2c_oper_t;
-
-struct qt1010_priv {
- struct qt1010_config *cfg;
- struct i2c_adapter *i2c;
-
- u8 reg1f_init_val;
- u8 reg20_init_val;
- u8 reg25_init_val;
-
- u32 frequency;
-};
-
-#endif
diff --git a/drivers/media/common/tuners/tda18212.c b/drivers/media/common/tuners/tda18212.c
deleted file mode 100644
index 5d9f028..0000000
--- a/drivers/media/common/tuners/tda18212.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * NXP TDA18212HN silicon tuner driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "tda18212.h"
-
-struct tda18212_priv {
- struct tda18212_config *cfg;
- struct i2c_adapter *i2c;
-
- u32 if_frequency;
-};
-
-/* write multiple registers */
-static int tda18212_wr_regs(struct tda18212_priv *priv, u8 reg, u8 *val,
- int len)
-{
- int ret;
- u8 buf[len+1];
- struct i2c_msg msg[1] = {
- {
- .addr = priv->cfg->i2c_address,
- .flags = 0,
- .len = sizeof(buf),
- .buf = buf,
- }
- };
-
- buf[0] = reg;
- memcpy(&buf[1], val, len);
-
- ret = i2c_transfer(priv->i2c, msg, 1);
- if (ret == 1) {
- ret = 0;
- } else {
- dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \
- "len=%d\n", KBUILD_MODNAME, ret, reg, len);
- ret = -EREMOTEIO;
- }
- return ret;
-}
-
-/* read multiple registers */
-static int tda18212_rd_regs(struct tda18212_priv *priv, u8 reg, u8 *val,
- int len)
-{
- int ret;
- u8 buf[len];
- struct i2c_msg msg[2] = {
- {
- .addr = priv->cfg->i2c_address,
- .flags = 0,
- .len = 1,
- .buf = ®,
- }, {
- .addr = priv->cfg->i2c_address,
- .flags = I2C_M_RD,
- .len = sizeof(buf),
- .buf = buf,
- }
- };
-
- ret = i2c_transfer(priv->i2c, msg, 2);
- if (ret == 2) {
- memcpy(val, buf, len);
- ret = 0;
- } else {
- dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \
- "len=%d\n", KBUILD_MODNAME, ret, reg, len);
- ret = -EREMOTEIO;
- }
-
- return ret;
-}
-
-/* write single register */
-static int tda18212_wr_reg(struct tda18212_priv *priv, u8 reg, u8 val)
-{
- return tda18212_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register */
-static int tda18212_rd_reg(struct tda18212_priv *priv, u8 reg, u8 *val)
-{
- return tda18212_rd_regs(priv, reg, val, 1);
-}
-
-#if 0 /* keep, useful when developing driver */
-static void tda18212_dump_regs(struct tda18212_priv *priv)
-{
- int i;
- u8 buf[256];
-
- #define TDA18212_RD_LEN 32
- for (i = 0; i < sizeof(buf); i += TDA18212_RD_LEN)
- tda18212_rd_regs(priv, i, &buf[i], TDA18212_RD_LEN);
-
- print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 32, 1, buf,
- sizeof(buf), true);
-
- return;
-}
-#endif
-
-static int tda18212_set_params(struct dvb_frontend *fe)
-{
- struct tda18212_priv *priv = fe->tuner_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- int ret, i;
- u32 if_khz;
- u8 buf[9];
- #define DVBT_6 0
- #define DVBT_7 1
- #define DVBT_8 2
- #define DVBT2_6 3
- #define DVBT2_7 4
- #define DVBT2_8 5
- #define DVBC_6 6
- #define DVBC_8 7
- static const u8 bw_params[][3] = {
- /* reg: 0f 13 23 */
- [DVBT_6] = { 0xb3, 0x20, 0x03 },
- [DVBT_7] = { 0xb3, 0x31, 0x01 },
- [DVBT_8] = { 0xb3, 0x22, 0x01 },
- [DVBT2_6] = { 0xbc, 0x20, 0x03 },
- [DVBT2_7] = { 0xbc, 0x72, 0x03 },
- [DVBT2_8] = { 0xbc, 0x22, 0x01 },
- [DVBC_6] = { 0x92, 0x50, 0x03 },
- [DVBC_8] = { 0x92, 0x53, 0x03 },
- };
-
- dev_dbg(&priv->i2c->dev,
- "%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n",
- __func__, c->delivery_system, c->frequency,
- c->bandwidth_hz);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- switch (c->delivery_system) {
- case SYS_DVBT:
- switch (c->bandwidth_hz) {
- case 6000000:
- if_khz = priv->cfg->if_dvbt_6;
- i = DVBT_6;
- break;
- case 7000000:
- if_khz = priv->cfg->if_dvbt_7;
- i = DVBT_7;
- break;
- case 8000000:
- if_khz = priv->cfg->if_dvbt_8;
- i = DVBT_8;
- break;
- default:
- ret = -EINVAL;
- goto error;
- }
- break;
- case SYS_DVBT2:
- switch (c->bandwidth_hz) {
- case 6000000:
- if_khz = priv->cfg->if_dvbt2_6;
- i = DVBT2_6;
- break;
- case 7000000:
- if_khz = priv->cfg->if_dvbt2_7;
- i = DVBT2_7;
- break;
- case 8000000:
- if_khz = priv->cfg->if_dvbt2_8;
- i = DVBT2_8;
- break;
- default:
- ret = -EINVAL;
- goto error;
- }
- break;
- case SYS_DVBC_ANNEX_A:
- case SYS_DVBC_ANNEX_C:
- if_khz = priv->cfg->if_dvbc;
- i = DVBC_8;
- break;
- default:
- ret = -EINVAL;
- goto error;
- }
-
- ret = tda18212_wr_reg(priv, 0x23, bw_params[i][2]);
- if (ret)
- goto error;
-
- ret = tda18212_wr_reg(priv, 0x06, 0x00);
- if (ret)
- goto error;
-
- ret = tda18212_wr_reg(priv, 0x0f, bw_params[i][0]);
- if (ret)
- goto error;
-
- buf[0] = 0x02;
- buf[1] = bw_params[i][1];
- buf[2] = 0x03; /* default value */
- buf[3] = DIV_ROUND_CLOSEST(if_khz, 50);
- buf[4] = ((c->frequency / 1000) >> 16) & 0xff;
- buf[5] = ((c->frequency / 1000) >> 8) & 0xff;
- buf[6] = ((c->frequency / 1000) >> 0) & 0xff;
- buf[7] = 0xc1;
- buf[8] = 0x01;
- ret = tda18212_wr_regs(priv, 0x12, buf, sizeof(buf));
- if (ret)
- goto error;
-
- /* actual IF rounded as it is on register */
- priv->if_frequency = buf[3] * 50 * 1000;
-
-exit:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- return ret;
-
-error:
- dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
- goto exit;
-}
-
-static int tda18212_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct tda18212_priv *priv = fe->tuner_priv;
-
- *frequency = priv->if_frequency;
-
- return 0;
-}
-
-static int tda18212_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static const struct dvb_tuner_ops tda18212_tuner_ops = {
- .info = {
- .name = "NXP TDA18212",
-
- .frequency_min = 48000000,
- .frequency_max = 864000000,
- .frequency_step = 1000,
- },
-
- .release = tda18212_release,
-
- .set_params = tda18212_set_params,
- .get_if_frequency = tda18212_get_if_frequency,
-};
-
-struct dvb_frontend *tda18212_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tda18212_config *cfg)
-{
- struct tda18212_priv *priv = NULL;
- int ret;
- u8 uninitialized_var(val);
-
- priv = kzalloc(sizeof(struct tda18212_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->cfg = cfg;
- priv->i2c = i2c;
- fe->tuner_priv = priv;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- /* check if the tuner is there */
- ret = tda18212_rd_reg(priv, 0x00, &val);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- dev_dbg(&priv->i2c->dev, "%s: ret=%d chip id=%02x\n", __func__, ret,
- val);
- if (ret || val != 0xc7) {
- kfree(priv);
- return NULL;
- }
-
- dev_info(&priv->i2c->dev,
- "%s: NXP TDA18212HN successfully identified\n",
- KBUILD_MODNAME);
-
- memcpy(&fe->ops.tuner_ops, &tda18212_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- return fe;
-}
-EXPORT_SYMBOL(tda18212_attach);
-
-MODULE_DESCRIPTION("NXP TDA18212HN silicon tuner driver");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/tda18212.h b/drivers/media/common/tuners/tda18212.h
deleted file mode 100644
index 9bd5da4..0000000
--- a/drivers/media/common/tuners/tda18212.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * NXP TDA18212HN silicon tuner driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef TDA18212_H
-#define TDA18212_H
-
-#include "dvb_frontend.h"
-
-struct tda18212_config {
- u8 i2c_address;
-
- u16 if_dvbt_6;
- u16 if_dvbt_7;
- u16 if_dvbt_8;
- u16 if_dvbt2_5;
- u16 if_dvbt2_6;
- u16 if_dvbt2_7;
- u16 if_dvbt2_8;
- u16 if_dvbc;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_TDA18212) || \
- (defined(CONFIG_MEDIA_TUNER_TDA18212_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tda18212_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tda18212_config *cfg);
-#else
-static inline struct dvb_frontend *tda18212_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tda18212_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/common/tuners/tda18218.c b/drivers/media/common/tuners/tda18218.c
deleted file mode 100644
index 8a6f9ca..0000000
--- a/drivers/media/common/tuners/tda18218.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * NXP TDA18218HN silicon tuner driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "tda18218.h"
-#include "tda18218_priv.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-/* write multiple registers */
-static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
-{
- int ret = 0;
- u8 buf[1+len], quotient, remainder, i, msg_len, msg_len_max;
- struct i2c_msg msg[1] = {
- {
- .addr = priv->cfg->i2c_address,
- .flags = 0,
- .buf = buf,
- }
- };
-
- msg_len_max = priv->cfg->i2c_wr_max - 1;
- quotient = len / msg_len_max;
- remainder = len % msg_len_max;
- msg_len = msg_len_max;
- for (i = 0; (i <= quotient && remainder); i++) {
- if (i == quotient) /* set len of the last msg */
- msg_len = remainder;
-
- msg[0].len = msg_len + 1;
- buf[0] = reg + i * msg_len_max;
- memcpy(&buf[1], &val[i * msg_len_max], msg_len);
-
- ret = i2c_transfer(priv->i2c, msg, 1);
- if (ret != 1)
- break;
- }
-
- if (ret == 1) {
- ret = 0;
- } else {
- warn("i2c wr failed ret:%d reg:%02x len:%d", ret, reg, len);
- ret = -EREMOTEIO;
- }
-
- return ret;
-}
-
-/* read multiple registers */
-static int tda18218_rd_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
-{
- int ret;
- u8 buf[reg+len]; /* we must start read always from reg 0x00 */
- struct i2c_msg msg[2] = {
- {
- .addr = priv->cfg->i2c_address,
- .flags = 0,
- .len = 1,
- .buf = "\x00",
- }, {
- .addr = priv->cfg->i2c_address,
- .flags = I2C_M_RD,
- .len = sizeof(buf),
- .buf = buf,
- }
- };
-
- ret = i2c_transfer(priv->i2c, msg, 2);
- if (ret == 2) {
- memcpy(val, &buf[reg], len);
- ret = 0;
- } else {
- warn("i2c rd failed ret:%d reg:%02x len:%d", ret, reg, len);
- ret = -EREMOTEIO;
- }
-
- return ret;
-}
-
-/* write single register */
-static int tda18218_wr_reg(struct tda18218_priv *priv, u8 reg, u8 val)
-{
- return tda18218_wr_regs(priv, reg, &val, 1);
-}
-
-/* read single register */
-
-static int tda18218_rd_reg(struct tda18218_priv *priv, u8 reg, u8 *val)
-{
- return tda18218_rd_regs(priv, reg, val, 1);
-}
-
-static int tda18218_set_params(struct dvb_frontend *fe)
-{
- struct tda18218_priv *priv = fe->tuner_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 bw = c->bandwidth_hz;
- int ret;
- u8 buf[3], i, BP_Filter, LP_Fc;
- u32 LO_Frac;
- /* TODO: find out correct AGC algorithm */
- u8 agc[][2] = {
- { R20_AGC11, 0x60 },
- { R23_AGC21, 0x02 },
- { R20_AGC11, 0xa0 },
- { R23_AGC21, 0x09 },
- { R20_AGC11, 0xe0 },
- { R23_AGC21, 0x0c },
- { R20_AGC11, 0x40 },
- { R23_AGC21, 0x01 },
- { R20_AGC11, 0x80 },
- { R23_AGC21, 0x08 },
- { R20_AGC11, 0xc0 },
- { R23_AGC21, 0x0b },
- { R24_AGC22, 0x1c },
- { R24_AGC22, 0x0c },
- };
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- /* low-pass filter cut-off frequency */
- if (bw <= 6000000) {
- LP_Fc = 0;
- priv->if_frequency = 3000000;
- } else if (bw <= 7000000) {
- LP_Fc = 1;
- priv->if_frequency = 3500000;
- } else {
- LP_Fc = 2;
- priv->if_frequency = 4000000;
- }
-
- LO_Frac = c->frequency + priv->if_frequency;
-
- /* band-pass filter */
- if (LO_Frac < 188000000)
- BP_Filter = 3;
- else if (LO_Frac < 253000000)
- BP_Filter = 4;
- else if (LO_Frac < 343000000)
- BP_Filter = 5;
- else
- BP_Filter = 6;
-
- buf[0] = (priv->regs[R1A_IF1] & ~7) | BP_Filter; /* BP_Filter */
- buf[1] = (priv->regs[R1B_IF2] & ~3) | LP_Fc; /* LP_Fc */
- buf[2] = priv->regs[R1C_AGC2B];
- ret = tda18218_wr_regs(priv, R1A_IF1, buf, 3);
- if (ret)
- goto error;
-
- buf[0] = (LO_Frac / 1000) >> 12; /* LO_Frac_0 */
- buf[1] = (LO_Frac / 1000) >> 4; /* LO_Frac_1 */
- buf[2] = (LO_Frac / 1000) << 4 |
- (priv->regs[R0C_MD5] & 0x0f); /* LO_Frac_2 */
- ret = tda18218_wr_regs(priv, R0A_MD3, buf, 3);
- if (ret)
- goto error;
-
- buf[0] = priv->regs[R0F_MD8] | (1 << 6); /* Freq_prog_Start */
- ret = tda18218_wr_regs(priv, R0F_MD8, buf, 1);
- if (ret)
- goto error;
-
- buf[0] = priv->regs[R0F_MD8] & ~(1 << 6); /* Freq_prog_Start */
- ret = tda18218_wr_regs(priv, R0F_MD8, buf, 1);
- if (ret)
- goto error;
-
- /* trigger AGC */
- for (i = 0; i < ARRAY_SIZE(agc); i++) {
- ret = tda18218_wr_reg(priv, agc[i][0], agc[i][1]);
- if (ret)
- goto error;
- }
-
-error:
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- if (ret)
- dbg("%s: failed ret:%d", __func__, ret);
-
- return ret;
-}
-
-static int tda18218_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct tda18218_priv *priv = fe->tuner_priv;
- *frequency = priv->if_frequency;
- dbg("%s: if=%d", __func__, *frequency);
- return 0;
-}
-
-static int tda18218_sleep(struct dvb_frontend *fe)
-{
- struct tda18218_priv *priv = fe->tuner_priv;
- int ret;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- /* standby */
- ret = tda18218_wr_reg(priv, R17_PD1, priv->regs[R17_PD1] | (1 << 0));
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- if (ret)
- dbg("%s: failed ret:%d", __func__, ret);
-
- return ret;
-}
-
-static int tda18218_init(struct dvb_frontend *fe)
-{
- struct tda18218_priv *priv = fe->tuner_priv;
- int ret;
-
- /* TODO: calibrations */
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- ret = tda18218_wr_regs(priv, R00_ID, priv->regs, TDA18218_NUM_REGS);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- if (ret)
- dbg("%s: failed ret:%d", __func__, ret);
-
- return ret;
-}
-
-static int tda18218_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static const struct dvb_tuner_ops tda18218_tuner_ops = {
- .info = {
- .name = "NXP TDA18218",
-
- .frequency_min = 174000000,
- .frequency_max = 864000000,
- .frequency_step = 1000,
- },
-
- .release = tda18218_release,
- .init = tda18218_init,
- .sleep = tda18218_sleep,
-
- .set_params = tda18218_set_params,
-
- .get_if_frequency = tda18218_get_if_frequency,
-};
-
-struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tda18218_config *cfg)
-{
- struct tda18218_priv *priv = NULL;
- u8 uninitialized_var(val);
- int ret;
- /* chip default registers values */
- static u8 def_regs[] = {
- 0xc0, 0x88, 0x00, 0x8e, 0x03, 0x00, 0x00, 0xd0, 0x00, 0x40,
- 0x00, 0x00, 0x07, 0xff, 0x84, 0x09, 0x00, 0x13, 0x00, 0x00,
- 0x01, 0x84, 0x09, 0xf0, 0x19, 0x0a, 0x8e, 0x69, 0x98, 0x01,
- 0x00, 0x58, 0x10, 0x40, 0x8c, 0x00, 0x0c, 0x48, 0x85, 0xc9,
- 0xa7, 0x00, 0x00, 0x00, 0x30, 0x81, 0x80, 0x00, 0x39, 0x00,
- 0x8a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, 0xf6
- };
-
- priv = kzalloc(sizeof(struct tda18218_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->cfg = cfg;
- priv->i2c = i2c;
- fe->tuner_priv = priv;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
-
- /* check if the tuner is there */
- ret = tda18218_rd_reg(priv, R00_ID, &val);
- dbg("%s: ret:%d chip ID:%02x", __func__, ret, val);
- if (ret || val != def_regs[R00_ID]) {
- kfree(priv);
- return NULL;
- }
-
- info("NXP TDA18218HN successfully identified.");
-
- memcpy(&fe->ops.tuner_ops, &tda18218_tuner_ops,
- sizeof(struct dvb_tuner_ops));
- memcpy(priv->regs, def_regs, sizeof(def_regs));
-
- /* loop-through enabled chip default register values */
- if (priv->cfg->loop_through) {
- priv->regs[R17_PD1] = 0xb0;
- priv->regs[R18_PD2] = 0x59;
- }
-
- /* standby */
- ret = tda18218_wr_reg(priv, R17_PD1, priv->regs[R17_PD1] | (1 << 0));
- if (ret)
- dbg("%s: failed ret:%d", __func__, ret);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
-
- return fe;
-}
-EXPORT_SYMBOL(tda18218_attach);
-
-MODULE_DESCRIPTION("NXP TDA18218HN silicon tuner driver");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/tda18218.h b/drivers/media/common/tuners/tda18218.h
deleted file mode 100644
index b4180d1..0000000
--- a/drivers/media/common/tuners/tda18218.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * NXP TDA18218HN silicon tuner driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef TDA18218_H
-#define TDA18218_H
-
-#include "dvb_frontend.h"
-
-struct tda18218_config {
- u8 i2c_address;
- u8 i2c_wr_max;
- u8 loop_through:1;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_TDA18218) || \
- (defined(CONFIG_MEDIA_TUNER_TDA18218_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tda18218_config *cfg);
-#else
-static inline struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tda18218_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/common/tuners/tda18218_priv.h b/drivers/media/common/tuners/tda18218_priv.h
deleted file mode 100644
index dc52b72..0000000
--- a/drivers/media/common/tuners/tda18218_priv.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * NXP TDA18218HN silicon tuner driver
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef TDA18218_PRIV_H
-#define TDA18218_PRIV_H
-
-#define LOG_PREFIX "tda18218"
-
-#undef dbg
-#define dbg(f, arg...) \
- if (debug) \
- printk(KERN_DEBUG LOG_PREFIX": " f "\n" , ## arg)
-#undef err
-#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-#define R00_ID 0x00 /* ID byte */
-#define R01_R1 0x01 /* Read byte 1 */
-#define R02_R2 0x02 /* Read byte 2 */
-#define R03_R3 0x03 /* Read byte 3 */
-#define R04_R4 0x04 /* Read byte 4 */
-#define R05_R5 0x05 /* Read byte 5 */
-#define R06_R6 0x06 /* Read byte 6 */
-#define R07_MD1 0x07 /* Main divider byte 1 */
-#define R08_PSM1 0x08 /* PSM byte 1 */
-#define R09_MD2 0x09 /* Main divider byte 2 */
-#define R0A_MD3 0x0a /* Main divider byte 1 */
-#define R0B_MD4 0x0b /* Main divider byte 4 */
-#define R0C_MD5 0x0c /* Main divider byte 5 */
-#define R0D_MD6 0x0d /* Main divider byte 6 */
-#define R0E_MD7 0x0e /* Main divider byte 7 */
-#define R0F_MD8 0x0f /* Main divider byte 8 */
-#define R10_CD1 0x10 /* Call divider byte 1 */
-#define R11_CD2 0x11 /* Call divider byte 2 */
-#define R12_CD3 0x12 /* Call divider byte 3 */
-#define R13_CD4 0x13 /* Call divider byte 4 */
-#define R14_CD5 0x14 /* Call divider byte 5 */
-#define R15_CD6 0x15 /* Call divider byte 6 */
-#define R16_CD7 0x16 /* Call divider byte 7 */
-#define R17_PD1 0x17 /* Power-down byte 1 */
-#define R18_PD2 0x18 /* Power-down byte 2 */
-#define R19_XTOUT 0x19 /* XTOUT byte */
-#define R1A_IF1 0x1a /* IF byte 1 */
-#define R1B_IF2 0x1b /* IF byte 2 */
-#define R1C_AGC2B 0x1c /* AGC2b byte */
-#define R1D_PSM2 0x1d /* PSM byte 2 */
-#define R1E_PSM3 0x1e /* PSM byte 3 */
-#define R1F_PSM4 0x1f /* PSM byte 4 */
-#define R20_AGC11 0x20 /* AGC1 byte 1 */
-#define R21_AGC12 0x21 /* AGC1 byte 2 */
-#define R22_AGC13 0x22 /* AGC1 byte 3 */
-#define R23_AGC21 0x23 /* AGC2 byte 1 */
-#define R24_AGC22 0x24 /* AGC2 byte 2 */
-#define R25_AAGC 0x25 /* Analog AGC byte */
-#define R26_RC 0x26 /* RC byte */
-#define R27_RSSI 0x27 /* RSSI byte */
-#define R28_IRCAL1 0x28 /* IR CAL byte 1 */
-#define R29_IRCAL2 0x29 /* IR CAL byte 2 */
-#define R2A_IRCAL3 0x2a /* IR CAL byte 3 */
-#define R2B_IRCAL4 0x2b /* IR CAL byte 4 */
-#define R2C_RFCAL1 0x2c /* RF CAL byte 1 */
-#define R2D_RFCAL2 0x2d /* RF CAL byte 2 */
-#define R2E_RFCAL3 0x2e /* RF CAL byte 3 */
-#define R2F_RFCAL4 0x2f /* RF CAL byte 4 */
-#define R30_RFCAL5 0x30 /* RF CAL byte 5 */
-#define R31_RFCAL6 0x31 /* RF CAL byte 6 */
-#define R32_RFCAL7 0x32 /* RF CAL byte 7 */
-#define R33_RFCAL8 0x33 /* RF CAL byte 8 */
-#define R34_RFCAL9 0x34 /* RF CAL byte 9 */
-#define R35_RFCAL10 0x35 /* RF CAL byte 10 */
-#define R36_RFCALRAM1 0x36 /* RF CAL RAM byte 1 */
-#define R37_RFCALRAM2 0x37 /* RF CAL RAM byte 2 */
-#define R38_MARGIN 0x38 /* Margin byte */
-#define R39_FMAX1 0x39 /* Fmax byte 1 */
-#define R3A_FMAX2 0x3a /* Fmax byte 2 */
-
-#define TDA18218_NUM_REGS 59
-
-struct tda18218_priv {
- struct tda18218_config *cfg;
- struct i2c_adapter *i2c;
-
- u32 if_frequency;
-
- u8 regs[TDA18218_NUM_REGS];
-};
-
-#endif
diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
deleted file mode 100644
index 39c6457..0000000
--- a/drivers/media/common/tuners/tda18271-common.c
+++ /dev/null
@@ -1,703 +0,0 @@
-/*
- tda18271-common.c - driver for the Philips / NXP TDA18271 silicon tuner
-
- Copyright (C) 2007, 2008 Michael Krufky <mkrufky@linuxtv.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "tda18271-priv.h"
-
-static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- enum tda18271_i2c_gate gate;
- int ret = 0;
-
- switch (priv->gate) {
- case TDA18271_GATE_DIGITAL:
- case TDA18271_GATE_ANALOG:
- gate = priv->gate;
- break;
- case TDA18271_GATE_AUTO:
- default:
- switch (priv->mode) {
- case TDA18271_DIGITAL:
- gate = TDA18271_GATE_DIGITAL;
- break;
- case TDA18271_ANALOG:
- default:
- gate = TDA18271_GATE_ANALOG;
- break;
- }
- }
-
- switch (gate) {
- case TDA18271_GATE_ANALOG:
- if (fe->ops.analog_ops.i2c_gate_ctrl)
- ret = fe->ops.analog_ops.i2c_gate_ctrl(fe, enable);
- break;
- case TDA18271_GATE_DIGITAL:
- if (fe->ops.i2c_gate_ctrl)
- ret = fe->ops.i2c_gate_ctrl(fe, enable);
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-};
-
-/*---------------------------------------------------------------------*/
-
-static void tda18271_dump_regs(struct dvb_frontend *fe, int extended)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
-
- tda_reg("=== TDA18271 REG DUMP ===\n");
- tda_reg("ID_BYTE = 0x%02x\n", 0xff & regs[R_ID]);
- tda_reg("THERMO_BYTE = 0x%02x\n", 0xff & regs[R_TM]);
- tda_reg("POWER_LEVEL_BYTE = 0x%02x\n", 0xff & regs[R_PL]);
- tda_reg("EASY_PROG_BYTE_1 = 0x%02x\n", 0xff & regs[R_EP1]);
- tda_reg("EASY_PROG_BYTE_2 = 0x%02x\n", 0xff & regs[R_EP2]);
- tda_reg("EASY_PROG_BYTE_3 = 0x%02x\n", 0xff & regs[R_EP3]);
- tda_reg("EASY_PROG_BYTE_4 = 0x%02x\n", 0xff & regs[R_EP4]);
- tda_reg("EASY_PROG_BYTE_5 = 0x%02x\n", 0xff & regs[R_EP5]);
- tda_reg("CAL_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_CPD]);
- tda_reg("CAL_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_CD1]);
- tda_reg("CAL_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_CD2]);
- tda_reg("CAL_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_CD3]);
- tda_reg("MAIN_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_MPD]);
- tda_reg("MAIN_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_MD1]);
- tda_reg("MAIN_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_MD2]);
- tda_reg("MAIN_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_MD3]);
-
- /* only dump extended regs if DBG_ADV is set */
- if (!(tda18271_debug & DBG_ADV))
- return;
-
- /* W indicates write-only registers.
- * Register dump for write-only registers shows last value written. */
-
- tda_reg("EXTENDED_BYTE_1 = 0x%02x\n", 0xff & regs[R_EB1]);
- tda_reg("EXTENDED_BYTE_2 = 0x%02x\n", 0xff & regs[R_EB2]);
- tda_reg("EXTENDED_BYTE_3 = 0x%02x\n", 0xff & regs[R_EB3]);
- tda_reg("EXTENDED_BYTE_4 = 0x%02x\n", 0xff & regs[R_EB4]);
- tda_reg("EXTENDED_BYTE_5 = 0x%02x\n", 0xff & regs[R_EB5]);
- tda_reg("EXTENDED_BYTE_6 = 0x%02x\n", 0xff & regs[R_EB6]);
- tda_reg("EXTENDED_BYTE_7 = 0x%02x\n", 0xff & regs[R_EB7]);
- tda_reg("EXTENDED_BYTE_8 = 0x%02x\n", 0xff & regs[R_EB8]);
- tda_reg("EXTENDED_BYTE_9 W = 0x%02x\n", 0xff & regs[R_EB9]);
- tda_reg("EXTENDED_BYTE_10 = 0x%02x\n", 0xff & regs[R_EB10]);
- tda_reg("EXTENDED_BYTE_11 = 0x%02x\n", 0xff & regs[R_EB11]);
- tda_reg("EXTENDED_BYTE_12 = 0x%02x\n", 0xff & regs[R_EB12]);
- tda_reg("EXTENDED_BYTE_13 = 0x%02x\n", 0xff & regs[R_EB13]);
- tda_reg("EXTENDED_BYTE_14 = 0x%02x\n", 0xff & regs[R_EB14]);
- tda_reg("EXTENDED_BYTE_15 = 0x%02x\n", 0xff & regs[R_EB15]);
- tda_reg("EXTENDED_BYTE_16 W = 0x%02x\n", 0xff & regs[R_EB16]);
- tda_reg("EXTENDED_BYTE_17 W = 0x%02x\n", 0xff & regs[R_EB17]);
- tda_reg("EXTENDED_BYTE_18 = 0x%02x\n", 0xff & regs[R_EB18]);
- tda_reg("EXTENDED_BYTE_19 W = 0x%02x\n", 0xff & regs[R_EB19]);
- tda_reg("EXTENDED_BYTE_20 W = 0x%02x\n", 0xff & regs[R_EB20]);
- tda_reg("EXTENDED_BYTE_21 = 0x%02x\n", 0xff & regs[R_EB21]);
- tda_reg("EXTENDED_BYTE_22 = 0x%02x\n", 0xff & regs[R_EB22]);
- tda_reg("EXTENDED_BYTE_23 = 0x%02x\n", 0xff & regs[R_EB23]);
-}
-
-int tda18271_read_regs(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- unsigned char buf = 0x00;
- int ret;
- struct i2c_msg msg[] = {
- { .addr = priv->i2c_props.addr, .flags = 0,
- .buf = &buf, .len = 1 },
- { .addr = priv->i2c_props.addr, .flags = I2C_M_RD,
- .buf = regs, .len = 16 }
- };
-
- tda18271_i2c_gate_ctrl(fe, 1);
-
- /* read all registers */
- ret = i2c_transfer(priv->i2c_props.adap, msg, 2);
-
- tda18271_i2c_gate_ctrl(fe, 0);
-
- if (ret != 2)
- tda_err("ERROR: i2c_transfer returned: %d\n", ret);
-
- if (tda18271_debug & DBG_REG)
- tda18271_dump_regs(fe, 0);
-
- return (ret == 2 ? 0 : ret);
-}
-
-int tda18271_read_extended(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- unsigned char regdump[TDA18271_NUM_REGS];
- unsigned char buf = 0x00;
- int ret, i;
- struct i2c_msg msg[] = {
- { .addr = priv->i2c_props.addr, .flags = 0,
- .buf = &buf, .len = 1 },
- { .addr = priv->i2c_props.addr, .flags = I2C_M_RD,
- .buf = regdump, .len = TDA18271_NUM_REGS }
- };
-
- tda18271_i2c_gate_ctrl(fe, 1);
-
- /* read all registers */
- ret = i2c_transfer(priv->i2c_props.adap, msg, 2);
-
- tda18271_i2c_gate_ctrl(fe, 0);
-
- if (ret != 2)
- tda_err("ERROR: i2c_transfer returned: %d\n", ret);
-
- for (i = 0; i < TDA18271_NUM_REGS; i++) {
- /* don't update write-only registers */
- if ((i != R_EB9) &&
- (i != R_EB16) &&
- (i != R_EB17) &&
- (i != R_EB19) &&
- (i != R_EB20))
- regs[i] = regdump[i];
- }
-
- if (tda18271_debug & DBG_REG)
- tda18271_dump_regs(fe, 1);
-
- return (ret == 2 ? 0 : ret);
-}
-
-int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- unsigned char buf[TDA18271_NUM_REGS + 1];
- struct i2c_msg msg = { .addr = priv->i2c_props.addr, .flags = 0,
- .buf = buf };
- int i, ret = 1, max;
-
- BUG_ON((len == 0) || (idx + len > sizeof(buf)));
-
-
- switch (priv->small_i2c) {
- case TDA18271_03_BYTE_CHUNK_INIT:
- max = 3;
- break;
- case TDA18271_08_BYTE_CHUNK_INIT:
- max = 8;
- break;
- case TDA18271_16_BYTE_CHUNK_INIT:
- max = 16;
- break;
- case TDA18271_39_BYTE_CHUNK_INIT:
- default:
- max = 39;
- }
-
- tda18271_i2c_gate_ctrl(fe, 1);
- while (len) {
- if (max > len)
- max = len;
-
- buf[0] = idx;
- for (i = 1; i <= max; i++)
- buf[i] = regs[idx - 1 + i];
-
- msg.len = max + 1;
-
- /* write registers */
- ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
- if (ret != 1)
- break;
-
- idx += max;
- len -= max;
- }
- tda18271_i2c_gate_ctrl(fe, 0);
-
- if (ret != 1)
- tda_err("ERROR: idx = 0x%x, len = %d, "
- "i2c_transfer returned: %d\n", idx, max, ret);
-
- return (ret == 1 ? 0 : ret);
-}
-
-/*---------------------------------------------------------------------*/
-
-int tda18271_charge_pump_source(struct dvb_frontend *fe,
- enum tda18271_pll pll, int force)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
-
- int r_cp = (pll == TDA18271_CAL_PLL) ? R_EB7 : R_EB4;
-
- regs[r_cp] &= ~0x20;
- regs[r_cp] |= ((force & 1) << 5);
-
- return tda18271_write_regs(fe, r_cp, 1);
-}
-
-int tda18271_init_regs(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
-
- tda_dbg("initializing registers for device @ %d-%04x\n",
- i2c_adapter_id(priv->i2c_props.adap),
- priv->i2c_props.addr);
-
- /* initialize registers */
- switch (priv->id) {
- case TDA18271HDC1:
- regs[R_ID] = 0x83;
- break;
- case TDA18271HDC2:
- regs[R_ID] = 0x84;
- break;
- };
-
- regs[R_TM] = 0x08;
- regs[R_PL] = 0x80;
- regs[R_EP1] = 0xc6;
- regs[R_EP2] = 0xdf;
- regs[R_EP3] = 0x16;
- regs[R_EP4] = 0x60;
- regs[R_EP5] = 0x80;
- regs[R_CPD] = 0x80;
- regs[R_CD1] = 0x00;
- regs[R_CD2] = 0x00;
- regs[R_CD3] = 0x00;
- regs[R_MPD] = 0x00;
- regs[R_MD1] = 0x00;
- regs[R_MD2] = 0x00;
- regs[R_MD3] = 0x00;
-
- switch (priv->id) {
- case TDA18271HDC1:
- regs[R_EB1] = 0xff;
- break;
- case TDA18271HDC2:
- regs[R_EB1] = 0xfc;
- break;
- };
-
- regs[R_EB2] = 0x01;
- regs[R_EB3] = 0x84;
- regs[R_EB4] = 0x41;
- regs[R_EB5] = 0x01;
- regs[R_EB6] = 0x84;
- regs[R_EB7] = 0x40;
- regs[R_EB8] = 0x07;
- regs[R_EB9] = 0x00;
- regs[R_EB10] = 0x00;
- regs[R_EB11] = 0x96;
-
- switch (priv->id) {
- case TDA18271HDC1:
- regs[R_EB12] = 0x0f;
- break;
- case TDA18271HDC2:
- regs[R_EB12] = 0x33;
- break;
- };
-
- regs[R_EB13] = 0xc1;
- regs[R_EB14] = 0x00;
- regs[R_EB15] = 0x8f;
- regs[R_EB16] = 0x00;
- regs[R_EB17] = 0x00;
-
- switch (priv->id) {
- case TDA18271HDC1:
- regs[R_EB18] = 0x00;
- break;
- case TDA18271HDC2:
- regs[R_EB18] = 0x8c;
- break;
- };
-
- regs[R_EB19] = 0x00;
- regs[R_EB20] = 0x20;
-
- switch (priv->id) {
- case TDA18271HDC1:
- regs[R_EB21] = 0x33;
- break;
- case TDA18271HDC2:
- regs[R_EB21] = 0xb3;
- break;
- };
-
- regs[R_EB22] = 0x48;
- regs[R_EB23] = 0xb0;
-
- tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS);
-
- /* setup agc1 gain */
- regs[R_EB17] = 0x00;
- tda18271_write_regs(fe, R_EB17, 1);
- regs[R_EB17] = 0x03;
- tda18271_write_regs(fe, R_EB17, 1);
- regs[R_EB17] = 0x43;
- tda18271_write_regs(fe, R_EB17, 1);
- regs[R_EB17] = 0x4c;
- tda18271_write_regs(fe, R_EB17, 1);
-
- /* setup agc2 gain */
- if ((priv->id) == TDA18271HDC1) {
- regs[R_EB20] = 0xa0;
- tda18271_write_regs(fe, R_EB20, 1);
- regs[R_EB20] = 0xa7;
- tda18271_write_regs(fe, R_EB20, 1);
- regs[R_EB20] = 0xe7;
- tda18271_write_regs(fe, R_EB20, 1);
- regs[R_EB20] = 0xec;
- tda18271_write_regs(fe, R_EB20, 1);
- }
-
- /* image rejection calibration */
-
- /* low-band */
- regs[R_EP3] = 0x1f;
- regs[R_EP4] = 0x66;
- regs[R_EP5] = 0x81;
- regs[R_CPD] = 0xcc;
- regs[R_CD1] = 0x6c;
- regs[R_CD2] = 0x00;
- regs[R_CD3] = 0x00;
- regs[R_MPD] = 0xcd;
- regs[R_MD1] = 0x77;
- regs[R_MD2] = 0x08;
- regs[R_MD3] = 0x00;
-
- tda18271_write_regs(fe, R_EP3, 11);
-
- if ((priv->id) == TDA18271HDC2) {
- /* main pll cp source on */
- tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1);
- msleep(1);
-
- /* main pll cp source off */
- tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0);
- }
-
- msleep(5); /* pll locking */
-
- /* launch detector */
- tda18271_write_regs(fe, R_EP1, 1);
- msleep(5); /* wanted low measurement */
-
- regs[R_EP5] = 0x85;
- regs[R_CPD] = 0xcb;
- regs[R_CD1] = 0x66;
- regs[R_CD2] = 0x70;
-
- tda18271_write_regs(fe, R_EP3, 7);
- msleep(5); /* pll locking */
-
- /* launch optimization algorithm */
- tda18271_write_regs(fe, R_EP2, 1);
- msleep(30); /* image low optimization completion */
-
- /* mid-band */
- regs[R_EP5] = 0x82;
- regs[R_CPD] = 0xa8;
- regs[R_CD2] = 0x00;
- regs[R_MPD] = 0xa9;
- regs[R_MD1] = 0x73;
- regs[R_MD2] = 0x1a;
-
- tda18271_write_regs(fe, R_EP3, 11);
- msleep(5); /* pll locking */
-
- /* launch detector */
- tda18271_write_regs(fe, R_EP1, 1);
- msleep(5); /* wanted mid measurement */
-
- regs[R_EP5] = 0x86;
- regs[R_CPD] = 0xa8;
- regs[R_CD1] = 0x66;
- regs[R_CD2] = 0xa0;
-
- tda18271_write_regs(fe, R_EP3, 7);
- msleep(5); /* pll locking */
-
- /* launch optimization algorithm */
- tda18271_write_regs(fe, R_EP2, 1);
- msleep(30); /* image mid optimization completion */
-
- /* high-band */
- regs[R_EP5] = 0x83;
- regs[R_CPD] = 0x98;
- regs[R_CD1] = 0x65;
- regs[R_CD2] = 0x00;
- regs[R_MPD] = 0x99;
- regs[R_MD1] = 0x71;
- regs[R_MD2] = 0xcd;
-
- tda18271_write_regs(fe, R_EP3, 11);
- msleep(5); /* pll locking */
-
- /* launch detector */
- tda18271_write_regs(fe, R_EP1, 1);
- msleep(5); /* wanted high measurement */
-
- regs[R_EP5] = 0x87;
- regs[R_CD1] = 0x65;
- regs[R_CD2] = 0x50;
-
- tda18271_write_regs(fe, R_EP3, 7);
- msleep(5); /* pll locking */
-
- /* launch optimization algorithm */
- tda18271_write_regs(fe, R_EP2, 1);
- msleep(30); /* image high optimization completion */
-
- /* return to normal mode */
- regs[R_EP4] = 0x64;
- tda18271_write_regs(fe, R_EP4, 1);
-
- /* synchronize */
- tda18271_write_regs(fe, R_EP1, 1);
-
- return 0;
-}
-
-/*---------------------------------------------------------------------*/
-
-/*
- * Standby modes, EP3 [7:5]
- *
- * | SM || SM_LT || SM_XT || mode description
- * |=====\\=======\\=======\\===================================
- * | 0 || 0 || 0 || normal mode
- * |-----||-------||-------||-----------------------------------
- * | || || || standby mode w/ slave tuner output
- * | 1 || 0 || 0 || & loop thru & xtal oscillator on
- * |-----||-------||-------||-----------------------------------
- * | 1 || 1 || 0 || standby mode w/ xtal oscillator on
- * |-----||-------||-------||-----------------------------------
- * | 1 || 1 || 1 || power off
- *
- */
-
-int tda18271_set_standby_mode(struct dvb_frontend *fe,
- int sm, int sm_lt, int sm_xt)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
-
- if (tda18271_debug & DBG_ADV)
- tda_dbg("sm = %d, sm_lt = %d, sm_xt = %d\n", sm, sm_lt, sm_xt);
-
- regs[R_EP3] &= ~0xe0; /* clear sm, sm_lt, sm_xt */
- regs[R_EP3] |= (sm ? (1 << 7) : 0) |
- (sm_lt ? (1 << 6) : 0) |
- (sm_xt ? (1 << 5) : 0);
-
- return tda18271_write_regs(fe, R_EP3, 1);
-}
-
-/*---------------------------------------------------------------------*/
-
-int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq)
-{
- /* sets main post divider & divider bytes, but does not write them */
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u8 d, pd;
- u32 div;
-
- int ret = tda18271_lookup_pll_map(fe, MAIN_PLL, &freq, &pd, &d);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_MPD] = (0x7f & pd);
-
- div = ((d * (freq / 1000)) << 7) / 125;
-
- regs[R_MD1] = 0x7f & (div >> 16);
- regs[R_MD2] = 0xff & (div >> 8);
- regs[R_MD3] = 0xff & div;
-fail:
- return ret;
-}
-
-int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq)
-{
- /* sets cal post divider & divider bytes, but does not write them */
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u8 d, pd;
- u32 div;
-
- int ret = tda18271_lookup_pll_map(fe, CAL_PLL, &freq, &pd, &d);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_CPD] = pd;
-
- div = ((d * (freq / 1000)) << 7) / 125;
-
- regs[R_CD1] = 0x7f & (div >> 16);
- regs[R_CD2] = 0xff & (div >> 8);
- regs[R_CD3] = 0xff & div;
-fail:
- return ret;
-}
-
-/*---------------------------------------------------------------------*/
-
-int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq)
-{
- /* sets bp filter bits, but does not write them */
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u8 val;
-
- int ret = tda18271_lookup_map(fe, BP_FILTER, freq, &val);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EP1] &= ~0x07; /* clear bp filter bits */
- regs[R_EP1] |= (0x07 & val);
-fail:
- return ret;
-}
-
-int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq)
-{
- /* sets K & M bits, but does not write them */
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u8 val;
-
- int ret = tda18271_lookup_map(fe, RF_CAL_KMCO, freq, &val);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EB13] &= ~0x7c; /* clear k & m bits */
- regs[R_EB13] |= (0x7c & val);
-fail:
- return ret;
-}
-
-int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq)
-{
- /* sets rf band bits, but does not write them */
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u8 val;
-
- int ret = tda18271_lookup_map(fe, RF_BAND, freq, &val);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EP2] &= ~0xe0; /* clear rf band bits */
- regs[R_EP2] |= (0xe0 & (val << 5));
-fail:
- return ret;
-}
-
-int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq)
-{
- /* sets gain taper bits, but does not write them */
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u8 val;
-
- int ret = tda18271_lookup_map(fe, GAIN_TAPER, freq, &val);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EP2] &= ~0x1f; /* clear gain taper bits */
- regs[R_EP2] |= (0x1f & val);
-fail:
- return ret;
-}
-
-int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq)
-{
- /* sets IR Meas bits, but does not write them */
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u8 val;
-
- int ret = tda18271_lookup_map(fe, IR_MEASURE, freq, &val);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EP5] &= ~0x07;
- regs[R_EP5] |= (0x07 & val);
-fail:
- return ret;
-}
-
-int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq)
-{
- /* sets rf cal byte (RFC_Cprog), but does not write it */
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u8 val;
-
- int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val);
- /* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range
- * for frequencies above 61.1 MHz. In these cases, the internal RF
- * tracking filters calibration mechanism is used.
- *
- * There is no need to warn the user about this.
- */
- if (ret < 0)
- goto fail;
-
- regs[R_EB14] = val;
-fail:
- return ret;
-}
-
-int _tda_printk(struct tda18271_priv *state, const char *level,
- const char *func, const char *fmt, ...)
-{
- struct va_format vaf;
- va_list args;
- int rtn;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- if (state)
- rtn = printk("%s%s: [%d-%04x|%c] %pV",
- level, func, i2c_adapter_id(state->i2c_props.adap),
- state->i2c_props.addr,
- (state->role == TDA18271_MASTER) ? 'M' : 'S',
- &vaf);
- else
- rtn = printk("%s%s: %pV", level, func, &vaf);
-
- va_end(args);
-
- return rtn;
-}
diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
deleted file mode 100644
index 2e67f44..0000000
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ /dev/null
@@ -1,1345 +0,0 @@
-/*
- tda18271-fe.c - driver for the Philips / NXP TDA18271 silicon tuner
-
- Copyright (C) 2007, 2008 Michael Krufky <mkrufky@linuxtv.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include "tda18271-priv.h"
-
-int tda18271_debug;
-module_param_named(debug, tda18271_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level "
- "(info=1, map=2, reg=4, adv=8, cal=16 (or-able))");
-
-static int tda18271_cal_on_startup = -1;
-module_param_named(cal, tda18271_cal_on_startup, int, 0644);
-MODULE_PARM_DESC(cal, "perform RF tracking filter calibration on startup");
-
-static DEFINE_MUTEX(tda18271_list_mutex);
-static LIST_HEAD(hybrid_tuner_instance_list);
-
-/*---------------------------------------------------------------------*/
-
-static int tda18271_toggle_output(struct dvb_frontend *fe, int standby)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
-
- int ret = tda18271_set_standby_mode(fe, standby ? 1 : 0,
- priv->output_opt & TDA18271_OUTPUT_LT_OFF ? 1 : 0,
- priv->output_opt & TDA18271_OUTPUT_XT_OFF ? 1 : 0);
-
- if (tda_fail(ret))
- goto fail;
-
- tda_dbg("%s mode: xtal oscillator %s, slave tuner loop thru %s\n",
- standby ? "standby" : "active",
- priv->output_opt & TDA18271_OUTPUT_XT_OFF ? "off" : "on",
- priv->output_opt & TDA18271_OUTPUT_LT_OFF ? "off" : "on");
-fail:
- return ret;
-}
-
-/*---------------------------------------------------------------------*/
-
-static inline int charge_pump_source(struct dvb_frontend *fe, int force)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- return tda18271_charge_pump_source(fe,
- (priv->role == TDA18271_SLAVE) ?
- TDA18271_CAL_PLL :
- TDA18271_MAIN_PLL, force);
-}
-
-static inline void tda18271_set_if_notch(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
-
- switch (priv->mode) {
- case TDA18271_ANALOG:
- regs[R_MPD] &= ~0x80; /* IF notch = 0 */
- break;
- case TDA18271_DIGITAL:
- regs[R_MPD] |= 0x80; /* IF notch = 1 */
- break;
- }
-}
-
-static int tda18271_channel_configuration(struct dvb_frontend *fe,
- struct tda18271_std_map_item *map,
- u32 freq, u32 bw)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int ret;
- u32 N;
-
- /* update TV broadcast parameters */
-
- /* set standard */
- regs[R_EP3] &= ~0x1f; /* clear std bits */
- regs[R_EP3] |= (map->agc_mode << 3) | map->std;
-
- if (priv->id == TDA18271HDC2) {
- /* set rfagc to high speed mode */
- regs[R_EP3] &= ~0x04;
- }
-
- /* set cal mode to normal */
- regs[R_EP4] &= ~0x03;
-
- /* update IF output level */
- regs[R_EP4] &= ~0x1c; /* clear if level bits */
- regs[R_EP4] |= (map->if_lvl << 2);
-
- /* update FM_RFn */
- regs[R_EP4] &= ~0x80;
- regs[R_EP4] |= map->fm_rfn << 7;
-
- /* update rf top / if top */
- regs[R_EB22] = 0x00;
- regs[R_EB22] |= map->rfagc_top;
- ret = tda18271_write_regs(fe, R_EB22, 1);
- if (tda_fail(ret))
- goto fail;
-
- /* --------------------------------------------------------------- */
-
- /* disable Power Level Indicator */
- regs[R_EP1] |= 0x40;
-
- /* make sure thermometer is off */
- regs[R_TM] &= ~0x10;
-
- /* frequency dependent parameters */
-
- tda18271_calc_ir_measure(fe, &freq);
-
- tda18271_calc_bp_filter(fe, &freq);
-
- tda18271_calc_rf_band(fe, &freq);
-
- tda18271_calc_gain_taper(fe, &freq);
-
- /* --------------------------------------------------------------- */
-
- /* dual tuner and agc1 extra configuration */
-
- switch (priv->role) {
- case TDA18271_MASTER:
- regs[R_EB1] |= 0x04; /* main vco */
- break;
- case TDA18271_SLAVE:
- regs[R_EB1] &= ~0x04; /* cal vco */
- break;
- }
-
- /* agc1 always active */
- regs[R_EB1] &= ~0x02;
-
- /* agc1 has priority on agc2 */
- regs[R_EB1] &= ~0x01;
-
- ret = tda18271_write_regs(fe, R_EB1, 1);
- if (tda_fail(ret))
- goto fail;
-
- /* --------------------------------------------------------------- */
-
- N = map->if_freq * 1000 + freq;
-
- switch (priv->role) {
- case TDA18271_MASTER:
- tda18271_calc_main_pll(fe, N);
- tda18271_set_if_notch(fe);
- tda18271_write_regs(fe, R_MPD, 4);
- break;
- case TDA18271_SLAVE:
- tda18271_calc_cal_pll(fe, N);
- tda18271_write_regs(fe, R_CPD, 4);
-
- regs[R_MPD] = regs[R_CPD] & 0x7f;
- tda18271_set_if_notch(fe);
- tda18271_write_regs(fe, R_MPD, 1);
- break;
- }
-
- ret = tda18271_write_regs(fe, R_TM, 7);
- if (tda_fail(ret))
- goto fail;
-
- /* force charge pump source */
- charge_pump_source(fe, 1);
-
- msleep(1);
-
- /* return pll to normal operation */
- charge_pump_source(fe, 0);
-
- msleep(20);
-
- if (priv->id == TDA18271HDC2) {
- /* set rfagc to normal speed mode */
- if (map->fm_rfn)
- regs[R_EP3] &= ~0x04;
- else
- regs[R_EP3] |= 0x04;
- ret = tda18271_write_regs(fe, R_EP3, 1);
- }
-fail:
- return ret;
-}
-
-static int tda18271_read_thermometer(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int tm;
-
- /* switch thermometer on */
- regs[R_TM] |= 0x10;
- tda18271_write_regs(fe, R_TM, 1);
-
- /* read thermometer info */
- tda18271_read_regs(fe);
-
- if ((((regs[R_TM] & 0x0f) == 0x00) && ((regs[R_TM] & 0x20) == 0x20)) ||
- (((regs[R_TM] & 0x0f) == 0x08) && ((regs[R_TM] & 0x20) == 0x00))) {
-
- if ((regs[R_TM] & 0x20) == 0x20)
- regs[R_TM] &= ~0x20;
- else
- regs[R_TM] |= 0x20;
-
- tda18271_write_regs(fe, R_TM, 1);
-
- msleep(10); /* temperature sensing */
-
- /* read thermometer info */
- tda18271_read_regs(fe);
- }
-
- tm = tda18271_lookup_thermometer(fe);
-
- /* switch thermometer off */
- regs[R_TM] &= ~0x10;
- tda18271_write_regs(fe, R_TM, 1);
-
- /* set CAL mode to normal */
- regs[R_EP4] &= ~0x03;
- tda18271_write_regs(fe, R_EP4, 1);
-
- return tm;
-}
-
-/* ------------------------------------------------------------------ */
-
-static int tda18271c2_rf_tracking_filters_correction(struct dvb_frontend *fe,
- u32 freq)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state;
- unsigned char *regs = priv->tda18271_regs;
- int i, ret;
- u8 tm_current, dc_over_dt, rf_tab;
- s32 rfcal_comp, approx;
-
- /* power up */
- ret = tda18271_set_standby_mode(fe, 0, 0, 0);
- if (tda_fail(ret))
- goto fail;
-
- /* read die current temperature */
- tm_current = tda18271_read_thermometer(fe);
-
- /* frequency dependent parameters */
-
- tda18271_calc_rf_cal(fe, &freq);
- rf_tab = regs[R_EB14];
-
- i = tda18271_lookup_rf_band(fe, &freq, NULL);
- if (tda_fail(i))
- return i;
-
- if ((0 == map[i].rf3) || (freq / 1000 < map[i].rf2)) {
- approx = map[i].rf_a1 * (s32)(freq / 1000 - map[i].rf1) +
- map[i].rf_b1 + rf_tab;
- } else {
- approx = map[i].rf_a2 * (s32)(freq / 1000 - map[i].rf2) +
- map[i].rf_b2 + rf_tab;
- }
-
- if (approx < 0)
- approx = 0;
- if (approx > 255)
- approx = 255;
-
- tda18271_lookup_map(fe, RF_CAL_DC_OVER_DT, &freq, &dc_over_dt);
-
- /* calculate temperature compensation */
- rfcal_comp = dc_over_dt * (s32)(tm_current - priv->tm_rfcal) / 1000;
-
- regs[R_EB14] = (unsigned char)(approx + rfcal_comp);
- ret = tda18271_write_regs(fe, R_EB14, 1);
-fail:
- return ret;
-}
-
-static int tda18271_por(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int ret;
-
- /* power up detector 1 */
- regs[R_EB12] &= ~0x20;
- ret = tda18271_write_regs(fe, R_EB12, 1);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EB18] &= ~0x80; /* turn agc1 loop on */
- regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */
- ret = tda18271_write_regs(fe, R_EB18, 1);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EB21] |= 0x03; /* set agc2_gain to -6 dB */
-
- /* POR mode */
- ret = tda18271_set_standby_mode(fe, 1, 0, 0);
- if (tda_fail(ret))
- goto fail;
-
- /* disable 1.5 MHz low pass filter */
- regs[R_EB23] &= ~0x04; /* forcelp_fc2_en = 0 */
- regs[R_EB23] &= ~0x02; /* XXX: lp_fc[2] = 0 */
- ret = tda18271_write_regs(fe, R_EB21, 3);
-fail:
- return ret;
-}
-
-static int tda18271_calibrate_rf(struct dvb_frontend *fe, u32 freq)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- u32 N;
-
- /* set CAL mode to normal */
- regs[R_EP4] &= ~0x03;
- tda18271_write_regs(fe, R_EP4, 1);
-
- /* switch off agc1 */
- regs[R_EP3] |= 0x40; /* sm_lt = 1 */
-
- regs[R_EB18] |= 0x03; /* set agc1_gain to 15 dB */
- tda18271_write_regs(fe, R_EB18, 1);
-
- /* frequency dependent parameters */
-
- tda18271_calc_bp_filter(fe, &freq);
- tda18271_calc_gain_taper(fe, &freq);
- tda18271_calc_rf_band(fe, &freq);
- tda18271_calc_km(fe, &freq);
-
- tda18271_write_regs(fe, R_EP1, 3);
- tda18271_write_regs(fe, R_EB13, 1);
-
- /* main pll charge pump source */
- tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1);
-
- /* cal pll charge pump source */
- tda18271_charge_pump_source(fe, TDA18271_CAL_PLL, 1);
-
- /* force dcdc converter to 0 V */
- regs[R_EB14] = 0x00;
- tda18271_write_regs(fe, R_EB14, 1);
-
- /* disable plls lock */
- regs[R_EB20] &= ~0x20;
- tda18271_write_regs(fe, R_EB20, 1);
-
- /* set CAL mode to RF tracking filter calibration */
- regs[R_EP4] |= 0x03;
- tda18271_write_regs(fe, R_EP4, 2);
-
- /* --------------------------------------------------------------- */
-
- /* set the internal calibration signal */
- N = freq;
-
- tda18271_calc_cal_pll(fe, N);
- tda18271_write_regs(fe, R_CPD, 4);
-
- /* downconvert internal calibration */
- N += 1000000;
-
- tda18271_calc_main_pll(fe, N);
- tda18271_write_regs(fe, R_MPD, 4);
-
- msleep(5);
-
- tda18271_write_regs(fe, R_EP2, 1);
- tda18271_write_regs(fe, R_EP1, 1);
- tda18271_write_regs(fe, R_EP2, 1);
- tda18271_write_regs(fe, R_EP1, 1);
-
- /* --------------------------------------------------------------- */
-
- /* normal operation for the main pll */
- tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0);
-
- /* normal operation for the cal pll */
- tda18271_charge_pump_source(fe, TDA18271_CAL_PLL, 0);
-
- msleep(10); /* plls locking */
-
- /* launch the rf tracking filters calibration */
- regs[R_EB20] |= 0x20;
- tda18271_write_regs(fe, R_EB20, 1);
-
- msleep(60); /* calibration */
-
- /* --------------------------------------------------------------- */
-
- /* set CAL mode to normal */
- regs[R_EP4] &= ~0x03;
-
- /* switch on agc1 */
- regs[R_EP3] &= ~0x40; /* sm_lt = 0 */
-
- regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */
- tda18271_write_regs(fe, R_EB18, 1);
-
- tda18271_write_regs(fe, R_EP3, 2);
-
- /* synchronization */
- tda18271_write_regs(fe, R_EP1, 1);
-
- /* get calibration result */
- tda18271_read_extended(fe);
-
- return regs[R_EB14];
-}
-
-static int tda18271_powerscan(struct dvb_frontend *fe,
- u32 *freq_in, u32 *freq_out)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int sgn, bcal, count, wait, ret;
- u8 cid_target;
- u16 count_limit;
- u32 freq;
-
- freq = *freq_in;
-
- tda18271_calc_rf_band(fe, &freq);
- tda18271_calc_rf_cal(fe, &freq);
- tda18271_calc_gain_taper(fe, &freq);
- tda18271_lookup_cid_target(fe, &freq, &cid_target, &count_limit);
-
- tda18271_write_regs(fe, R_EP2, 1);
- tda18271_write_regs(fe, R_EB14, 1);
-
- /* downconvert frequency */
- freq += 1000000;
-
- tda18271_calc_main_pll(fe, freq);
- tda18271_write_regs(fe, R_MPD, 4);
-
- msleep(5); /* pll locking */
-
- /* detection mode */
- regs[R_EP4] &= ~0x03;
- regs[R_EP4] |= 0x01;
- tda18271_write_regs(fe, R_EP4, 1);
-
- /* launch power detection measurement */
- tda18271_write_regs(fe, R_EP2, 1);
-
- /* read power detection info, stored in EB10 */
- ret = tda18271_read_extended(fe);
- if (tda_fail(ret))
- return ret;
-
- /* algorithm initialization */
- sgn = 1;
- *freq_out = *freq_in;
- bcal = 0;
- count = 0;
- wait = false;
-
- while ((regs[R_EB10] & 0x3f) < cid_target) {
- /* downconvert updated freq to 1 MHz */
- freq = *freq_in + (sgn * count) + 1000000;
-
- tda18271_calc_main_pll(fe, freq);
- tda18271_write_regs(fe, R_MPD, 4);
-
- if (wait) {
- msleep(5); /* pll locking */
- wait = false;
- } else
- udelay(100); /* pll locking */
-
- /* launch power detection measurement */
- tda18271_write_regs(fe, R_EP2, 1);
-
- /* read power detection info, stored in EB10 */
- ret = tda18271_read_extended(fe);
- if (tda_fail(ret))
- return ret;
-
- count += 200;
-
- if (count <= count_limit)
- continue;
-
- if (sgn <= 0)
- break;
-
- sgn = -1 * sgn;
- count = 200;
- wait = true;
- }
-
- if ((regs[R_EB10] & 0x3f) >= cid_target) {
- bcal = 1;
- *freq_out = freq - 1000000;
- } else
- bcal = 0;
-
- tda_cal("bcal = %d, freq_in = %d, freq_out = %d (freq = %d)\n",
- bcal, *freq_in, *freq_out, freq);
-
- return bcal;
-}
-
-static int tda18271_powerscan_init(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int ret;
-
- /* set standard to digital */
- regs[R_EP3] &= ~0x1f; /* clear std bits */
- regs[R_EP3] |= 0x12;
-
- /* set cal mode to normal */
- regs[R_EP4] &= ~0x03;
-
- /* update IF output level */
- regs[R_EP4] &= ~0x1c; /* clear if level bits */
-
- ret = tda18271_write_regs(fe, R_EP3, 2);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */
- ret = tda18271_write_regs(fe, R_EB18, 1);
- if (tda_fail(ret))
- goto fail;
-
- regs[R_EB21] &= ~0x03; /* set agc2_gain to -15 dB */
-
- /* 1.5 MHz low pass filter */
- regs[R_EB23] |= 0x04; /* forcelp_fc2_en = 1 */
- regs[R_EB23] |= 0x02; /* lp_fc[2] = 1 */
-
- ret = tda18271_write_regs(fe, R_EB21, 3);
-fail:
- return ret;
-}
-
-static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state;
- unsigned char *regs = priv->tda18271_regs;
- int bcal, rf, i;
- s32 divisor, dividend;
-#define RF1 0
-#define RF2 1
-#define RF3 2
- u32 rf_default[3];
- u32 rf_freq[3];
- s32 prog_cal[3];
- s32 prog_tab[3];
-
- i = tda18271_lookup_rf_band(fe, &freq, NULL);
-
- if (tda_fail(i))
- return i;
-
- rf_default[RF1] = 1000 * map[i].rf1_def;
- rf_default[RF2] = 1000 * map[i].rf2_def;
- rf_default[RF3] = 1000 * map[i].rf3_def;
-
- for (rf = RF1; rf <= RF3; rf++) {
- if (0 == rf_default[rf])
- return 0;
- tda_cal("freq = %d, rf = %d\n", freq, rf);
-
- /* look for optimized calibration frequency */
- bcal = tda18271_powerscan(fe, &rf_default[rf], &rf_freq[rf]);
- if (tda_fail(bcal))
- return bcal;
-
- tda18271_calc_rf_cal(fe, &rf_freq[rf]);
- prog_tab[rf] = (s32)regs[R_EB14];
-
- if (1 == bcal)
- prog_cal[rf] =
- (s32)tda18271_calibrate_rf(fe, rf_freq[rf]);
- else
- prog_cal[rf] = prog_tab[rf];
-
- switch (rf) {
- case RF1:
- map[i].rf_a1 = 0;
- map[i].rf_b1 = (prog_cal[RF1] - prog_tab[RF1]);
- map[i].rf1 = rf_freq[RF1] / 1000;
- break;
- case RF2:
- dividend = (prog_cal[RF2] - prog_tab[RF2] -
- prog_cal[RF1] + prog_tab[RF1]);
- divisor = (s32)(rf_freq[RF2] - rf_freq[RF1]) / 1000;
- map[i].rf_a1 = (dividend / divisor);
- map[i].rf2 = rf_freq[RF2] / 1000;
- break;
- case RF3:
- dividend = (prog_cal[RF3] - prog_tab[RF3] -
- prog_cal[RF2] + prog_tab[RF2]);
- divisor = (s32)(rf_freq[RF3] - rf_freq[RF2]) / 1000;
- map[i].rf_a2 = (dividend / divisor);
- map[i].rf_b2 = (prog_cal[RF2] - prog_tab[RF2]);
- map[i].rf3 = rf_freq[RF3] / 1000;
- break;
- default:
- BUG();
- }
- }
-
- return 0;
-}
-
-static int tda18271_calc_rf_filter_curve(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned int i;
- int ret;
-
- tda_info("tda18271: performing RF tracking filter calibration\n");
-
- /* wait for die temperature stabilization */
- msleep(200);
-
- ret = tda18271_powerscan_init(fe);
- if (tda_fail(ret))
- goto fail;
-
- /* rf band calibration */
- for (i = 0; priv->rf_cal_state[i].rfmax != 0; i++) {
- ret =
- tda18271_rf_tracking_filters_init(fe, 1000 *
- priv->rf_cal_state[i].rfmax);
- if (tda_fail(ret))
- goto fail;
- }
-
- priv->tm_rfcal = tda18271_read_thermometer(fe);
-fail:
- return ret;
-}
-
-/* ------------------------------------------------------------------ */
-
-static int tda18271c2_rf_cal_init(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int ret;
-
- /* test RF_CAL_OK to see if we need init */
- if ((regs[R_EP1] & 0x10) == 0)
- priv->cal_initialized = false;
-
- if (priv->cal_initialized)
- return 0;
-
- ret = tda18271_calc_rf_filter_curve(fe);
- if (tda_fail(ret))
- goto fail;
-
- ret = tda18271_por(fe);
- if (tda_fail(ret))
- goto fail;
-
- tda_info("tda18271: RF tracking filter calibration complete\n");
-
- priv->cal_initialized = true;
- goto end;
-fail:
- tda_info("tda18271: RF tracking filter calibration failed!\n");
-end:
- return ret;
-}
-
-static int tda18271c1_rf_tracking_filter_calibration(struct dvb_frontend *fe,
- u32 freq, u32 bw)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int ret;
- u32 N = 0;
-
- /* calculate bp filter */
- tda18271_calc_bp_filter(fe, &freq);
- tda18271_write_regs(fe, R_EP1, 1);
-
- regs[R_EB4] &= 0x07;
- regs[R_EB4] |= 0x60;
- tda18271_write_regs(fe, R_EB4, 1);
-
- regs[R_EB7] = 0x60;
- tda18271_write_regs(fe, R_EB7, 1);
-
- regs[R_EB14] = 0x00;
- tda18271_write_regs(fe, R_EB14, 1);
-
- regs[R_EB20] = 0xcc;
- tda18271_write_regs(fe, R_EB20, 1);
-
- /* set cal mode to RF tracking filter calibration */
- regs[R_EP4] |= 0x03;
-
- /* calculate cal pll */
-
- switch (priv->mode) {
- case TDA18271_ANALOG:
- N = freq - 1250000;
- break;
- case TDA18271_DIGITAL:
- N = freq + bw / 2;
- break;
- }
-
- tda18271_calc_cal_pll(fe, N);
-
- /* calculate main pll */
-
- switch (priv->mode) {
- case TDA18271_ANALOG:
- N = freq - 250000;
- break;
- case TDA18271_DIGITAL:
- N = freq + bw / 2 + 1000000;
- break;
- }
-
- tda18271_calc_main_pll(fe, N);
-
- ret = tda18271_write_regs(fe, R_EP3, 11);
- if (tda_fail(ret))
- return ret;
-
- msleep(5); /* RF tracking filter calibration initialization */
-
- /* search for K,M,CO for RF calibration */
- tda18271_calc_km(fe, &freq);
- tda18271_write_regs(fe, R_EB13, 1);
-
- /* search for rf band */
- tda18271_calc_rf_band(fe, &freq);
-
- /* search for gain taper */
- tda18271_calc_gain_taper(fe, &freq);
-
- tda18271_write_regs(fe, R_EP2, 1);
- tda18271_write_regs(fe, R_EP1, 1);
- tda18271_write_regs(fe, R_EP2, 1);
- tda18271_write_regs(fe, R_EP1, 1);
-
- regs[R_EB4] &= 0x07;
- regs[R_EB4] |= 0x40;
- tda18271_write_regs(fe, R_EB4, 1);
-
- regs[R_EB7] = 0x40;
- tda18271_write_regs(fe, R_EB7, 1);
- msleep(10); /* pll locking */
-
- regs[R_EB20] = 0xec;
- tda18271_write_regs(fe, R_EB20, 1);
- msleep(60); /* RF tracking filter calibration completion */
-
- regs[R_EP4] &= ~0x03; /* set cal mode to normal */
- tda18271_write_regs(fe, R_EP4, 1);
-
- tda18271_write_regs(fe, R_EP1, 1);
-
- /* RF tracking filter correction for VHF_Low band */
- if (0 == tda18271_calc_rf_cal(fe, &freq))
- tda18271_write_regs(fe, R_EB14, 1);
-
- return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-static int tda18271_ir_cal_init(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int ret;
-
- ret = tda18271_read_regs(fe);
- if (tda_fail(ret))
- goto fail;
-
- /* test IR_CAL_OK to see if we need init */
- if ((regs[R_EP1] & 0x08) == 0)
- ret = tda18271_init_regs(fe);
-fail:
- return ret;
-}
-
-static int tda18271_init(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- int ret;
-
- mutex_lock(&priv->lock);
-
- /* full power up */
- ret = tda18271_set_standby_mode(fe, 0, 0, 0);
- if (tda_fail(ret))
- goto fail;
-
- /* initialization */
- ret = tda18271_ir_cal_init(fe);
- if (tda_fail(ret))
- goto fail;
-
- if (priv->id == TDA18271HDC2)
- tda18271c2_rf_cal_init(fe);
-fail:
- mutex_unlock(&priv->lock);
-
- return ret;
-}
-
-static int tda18271_sleep(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- int ret;
-
- mutex_lock(&priv->lock);
-
- /* enter standby mode, with required output features enabled */
- ret = tda18271_toggle_output(fe, 1);
-
- mutex_unlock(&priv->lock);
-
- return ret;
-}
-
-/* ------------------------------------------------------------------ */
-
-static int tda18271_agc(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- int ret = 0;
-
- switch (priv->config) {
- case 0:
- /* no external agc configuration required */
- if (tda18271_debug & DBG_ADV)
- tda_dbg("no agc configuration provided\n");
- break;
- case 3:
- /* switch with GPIO of saa713x */
- tda_dbg("invoking callback\n");
- if (fe->callback)
- ret = fe->callback(priv->i2c_props.adap->algo_data,
- DVB_FRONTEND_COMPONENT_TUNER,
- TDA18271_CALLBACK_CMD_AGC_ENABLE,
- priv->mode);
- break;
- case 1:
- case 2:
- default:
- /* n/a - currently not supported */
- tda_err("unsupported configuration: %d\n", priv->config);
- ret = -EINVAL;
- break;
- }
- return ret;
-}
-
-static int tda18271_tune(struct dvb_frontend *fe,
- struct tda18271_std_map_item *map, u32 freq, u32 bw)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- int ret;
-
- tda_dbg("freq = %d, ifc = %d, bw = %d, agc_mode = %d, std = %d\n",
- freq, map->if_freq, bw, map->agc_mode, map->std);
-
- ret = tda18271_agc(fe);
- if (tda_fail(ret))
- tda_warn("failed to configure agc\n");
-
- ret = tda18271_init(fe);
- if (tda_fail(ret))
- goto fail;
-
- mutex_lock(&priv->lock);
-
- switch (priv->id) {
- case TDA18271HDC1:
- tda18271c1_rf_tracking_filter_calibration(fe, freq, bw);
- break;
- case TDA18271HDC2:
- tda18271c2_rf_tracking_filters_correction(fe, freq);
- break;
- }
- ret = tda18271_channel_configuration(fe, map, freq, bw);
-
- mutex_unlock(&priv->lock);
-fail:
- return ret;
-}
-
-/* ------------------------------------------------------------------ */
-
-static int tda18271_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 delsys = c->delivery_system;
- u32 bw = c->bandwidth_hz;
- u32 freq = c->frequency;
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_std_map *std_map = &priv->std;
- struct tda18271_std_map_item *map;
- int ret;
-
- priv->mode = TDA18271_DIGITAL;
-
- switch (delsys) {
- case SYS_ATSC:
- map = &std_map->atsc_6;
- bw = 6000000;
- break;
- case SYS_ISDBT:
- case SYS_DVBT:
- case SYS_DVBT2:
- if (bw <= 6000000) {
- map = &std_map->dvbt_6;
- } else if (bw <= 7000000) {
- map = &std_map->dvbt_7;
- } else {
- map = &std_map->dvbt_8;
- }
- break;
- case SYS_DVBC_ANNEX_B:
- bw = 6000000;
- /* falltrough */
- case SYS_DVBC_ANNEX_A:
- case SYS_DVBC_ANNEX_C:
- if (bw <= 6000000) {
- map = &std_map->qam_6;
- } else if (bw <= 7000000) {
- map = &std_map->qam_7;
- } else {
- map = &std_map->qam_8;
- }
- break;
- default:
- tda_warn("modulation type not supported!\n");
- return -EINVAL;
- }
-
- /* When tuning digital, the analog demod must be tri-stated */
- if (fe->ops.analog_ops.standby)
- fe->ops.analog_ops.standby(fe);
-
- ret = tda18271_tune(fe, map, freq, bw);
-
- if (tda_fail(ret))
- goto fail;
-
- priv->if_freq = map->if_freq;
- priv->frequency = freq;
- priv->bandwidth = bw;
-fail:
- return ret;
-}
-
-static int tda18271_set_analog_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_std_map *std_map = &priv->std;
- struct tda18271_std_map_item *map;
- char *mode;
- int ret;
- u32 freq = params->frequency * 125 *
- ((params->mode == V4L2_TUNER_RADIO) ? 1 : 1000) / 2;
-
- priv->mode = TDA18271_ANALOG;
-
- if (params->mode == V4L2_TUNER_RADIO) {
- map = &std_map->fm_radio;
- mode = "fm";
- } else if (params->std & V4L2_STD_MN) {
- map = &std_map->atv_mn;
- mode = "MN";
- } else if (params->std & V4L2_STD_B) {
- map = &std_map->atv_b;
- mode = "B";
- } else if (params->std & V4L2_STD_GH) {
- map = &std_map->atv_gh;
- mode = "GH";
- } else if (params->std & V4L2_STD_PAL_I) {
- map = &std_map->atv_i;
- mode = "I";
- } else if (params->std & V4L2_STD_DK) {
- map = &std_map->atv_dk;
- mode = "DK";
- } else if (params->std & V4L2_STD_SECAM_L) {
- map = &std_map->atv_l;
- mode = "L";
- } else if (params->std & V4L2_STD_SECAM_LC) {
- map = &std_map->atv_lc;
- mode = "L'";
- } else {
- map = &std_map->atv_i;
- mode = "xx";
- }
-
- tda_dbg("setting tda18271 to system %s\n", mode);
-
- ret = tda18271_tune(fe, map, freq, 0);
-
- if (tda_fail(ret))
- goto fail;
-
- priv->if_freq = map->if_freq;
- priv->frequency = freq;
- priv->bandwidth = 0;
-fail:
- return ret;
-}
-
-static int tda18271_release(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
-
- mutex_lock(&tda18271_list_mutex);
-
- if (priv)
- hybrid_tuner_release_state(priv);
-
- mutex_unlock(&tda18271_list_mutex);
-
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int tda18271_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static int tda18271_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- *bandwidth = priv->bandwidth;
- return 0;
-}
-
-static int tda18271_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- *frequency = (u32)priv->if_freq * 1000;
- return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-#define tda18271_update_std(std_cfg, name) do { \
- if (map->std_cfg.if_freq + \
- map->std_cfg.agc_mode + map->std_cfg.std + \
- map->std_cfg.if_lvl + map->std_cfg.rfagc_top > 0) { \
- tda_dbg("Using custom std config for %s\n", name); \
- memcpy(&std->std_cfg, &map->std_cfg, \
- sizeof(struct tda18271_std_map_item)); \
- } } while (0)
-
-#define tda18271_dump_std_item(std_cfg, name) do { \
- tda_dbg("(%s) if_freq = %d, agc_mode = %d, std = %d, " \
- "if_lvl = %d, rfagc_top = 0x%02x\n", \
- name, std->std_cfg.if_freq, \
- std->std_cfg.agc_mode, std->std_cfg.std, \
- std->std_cfg.if_lvl, std->std_cfg.rfagc_top); \
- } while (0)
-
-static int tda18271_dump_std_map(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_std_map *std = &priv->std;
-
- tda_dbg("========== STANDARD MAP SETTINGS ==========\n");
- tda18271_dump_std_item(fm_radio, " fm ");
- tda18271_dump_std_item(atv_b, "atv b ");
- tda18271_dump_std_item(atv_dk, "atv dk");
- tda18271_dump_std_item(atv_gh, "atv gh");
- tda18271_dump_std_item(atv_i, "atv i ");
- tda18271_dump_std_item(atv_l, "atv l ");
- tda18271_dump_std_item(atv_lc, "atv l'");
- tda18271_dump_std_item(atv_mn, "atv mn");
- tda18271_dump_std_item(atsc_6, "atsc 6");
- tda18271_dump_std_item(dvbt_6, "dvbt 6");
- tda18271_dump_std_item(dvbt_7, "dvbt 7");
- tda18271_dump_std_item(dvbt_8, "dvbt 8");
- tda18271_dump_std_item(qam_6, "qam 6 ");
- tda18271_dump_std_item(qam_8, "qam 8 ");
-
- return 0;
-}
-
-static int tda18271_update_std_map(struct dvb_frontend *fe,
- struct tda18271_std_map *map)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_std_map *std = &priv->std;
-
- if (!map)
- return -EINVAL;
-
- tda18271_update_std(fm_radio, "fm");
- tda18271_update_std(atv_b, "atv b");
- tda18271_update_std(atv_dk, "atv dk");
- tda18271_update_std(atv_gh, "atv gh");
- tda18271_update_std(atv_i, "atv i");
- tda18271_update_std(atv_l, "atv l");
- tda18271_update_std(atv_lc, "atv l'");
- tda18271_update_std(atv_mn, "atv mn");
- tda18271_update_std(atsc_6, "atsc 6");
- tda18271_update_std(dvbt_6, "dvbt 6");
- tda18271_update_std(dvbt_7, "dvbt 7");
- tda18271_update_std(dvbt_8, "dvbt 8");
- tda18271_update_std(qam_6, "qam 6");
- tda18271_update_std(qam_8, "qam 8");
-
- return 0;
-}
-
-static int tda18271_get_id(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- char *name;
-
- mutex_lock(&priv->lock);
- tda18271_read_regs(fe);
- mutex_unlock(&priv->lock);
-
- switch (regs[R_ID] & 0x7f) {
- case 3:
- name = "TDA18271HD/C1";
- priv->id = TDA18271HDC1;
- break;
- case 4:
- name = "TDA18271HD/C2";
- priv->id = TDA18271HDC2;
- break;
- default:
- tda_info("Unknown device (%i) detected @ %d-%04x, device not supported.\n",
- regs[R_ID], i2c_adapter_id(priv->i2c_props.adap),
- priv->i2c_props.addr);
- return -EINVAL;
- }
-
- tda_info("%s detected @ %d-%04x\n", name,
- i2c_adapter_id(priv->i2c_props.adap), priv->i2c_props.addr);
-
- return 0;
-}
-
-static int tda18271_setup_configuration(struct dvb_frontend *fe,
- struct tda18271_config *cfg)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
-
- priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO;
- priv->role = (cfg) ? cfg->role : TDA18271_MASTER;
- priv->config = (cfg) ? cfg->config : 0;
- priv->small_i2c = (cfg) ?
- cfg->small_i2c : TDA18271_39_BYTE_CHUNK_INIT;
- priv->output_opt = (cfg) ?
- cfg->output_opt : TDA18271_OUTPUT_LT_XT_ON;
-
- return 0;
-}
-
-static inline int tda18271_need_cal_on_startup(struct tda18271_config *cfg)
-{
- /* tda18271_cal_on_startup == -1 when cal module option is unset */
- return ((tda18271_cal_on_startup == -1) ?
- /* honor configuration setting */
- ((cfg) && (cfg->rf_cal_on_startup)) :
- /* module option overrides configuration setting */
- (tda18271_cal_on_startup)) ? 1 : 0;
-}
-
-static int tda18271_set_config(struct dvb_frontend *fe, void *priv_cfg)
-{
- struct tda18271_config *cfg = (struct tda18271_config *) priv_cfg;
-
- tda18271_setup_configuration(fe, cfg);
-
- if (tda18271_need_cal_on_startup(cfg))
- tda18271_init(fe);
-
- /* override default std map with values in config struct */
- if ((cfg) && (cfg->std_map))
- tda18271_update_std_map(fe, cfg->std_map);
-
- return 0;
-}
-
-static const struct dvb_tuner_ops tda18271_tuner_ops = {
- .info = {
- .name = "NXP TDA18271HD",
- .frequency_min = 45000000,
- .frequency_max = 864000000,
- .frequency_step = 62500
- },
- .init = tda18271_init,
- .sleep = tda18271_sleep,
- .set_params = tda18271_set_params,
- .set_analog_params = tda18271_set_analog_params,
- .release = tda18271_release,
- .set_config = tda18271_set_config,
- .get_frequency = tda18271_get_frequency,
- .get_bandwidth = tda18271_get_bandwidth,
- .get_if_frequency = tda18271_get_if_frequency,
-};
-
-struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
- struct i2c_adapter *i2c,
- struct tda18271_config *cfg)
-{
- struct tda18271_priv *priv = NULL;
- int instance, ret;
-
- mutex_lock(&tda18271_list_mutex);
-
- instance = hybrid_tuner_request_state(struct tda18271_priv, priv,
- hybrid_tuner_instance_list,
- i2c, addr, "tda18271");
- switch (instance) {
- case 0:
- goto fail;
- case 1:
- /* new tuner instance */
- fe->tuner_priv = priv;
-
- tda18271_setup_configuration(fe, cfg);
-
- priv->cal_initialized = false;
- mutex_init(&priv->lock);
-
- ret = tda18271_get_id(fe);
- if (tda_fail(ret))
- goto fail;
-
- ret = tda18271_assign_map_layout(fe);
- if (tda_fail(ret))
- goto fail;
-
- mutex_lock(&priv->lock);
- tda18271_init_regs(fe);
-
- if ((tda18271_need_cal_on_startup(cfg)) &&
- (priv->id == TDA18271HDC2))
- tda18271c2_rf_cal_init(fe);
-
- mutex_unlock(&priv->lock);
- break;
- default:
- /* existing tuner instance */
- fe->tuner_priv = priv;
-
- /* allow dvb driver to override configuration settings */
- if (cfg) {
- if (cfg->gate != TDA18271_GATE_ANALOG)
- priv->gate = cfg->gate;
- if (cfg->role)
- priv->role = cfg->role;
- if (cfg->config)
- priv->config = cfg->config;
- if (cfg->small_i2c)
- priv->small_i2c = cfg->small_i2c;
- if (cfg->output_opt)
- priv->output_opt = cfg->output_opt;
- if (cfg->std_map)
- tda18271_update_std_map(fe, cfg->std_map);
- }
- if (tda18271_need_cal_on_startup(cfg))
- tda18271_init(fe);
- break;
- }
-
- /* override default std map with values in config struct */
- if ((cfg) && (cfg->std_map))
- tda18271_update_std_map(fe, cfg->std_map);
-
- mutex_unlock(&tda18271_list_mutex);
-
- memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- if (tda18271_debug & (DBG_MAP | DBG_ADV))
- tda18271_dump_std_map(fe);
-
- return fe;
-fail:
- mutex_unlock(&tda18271_list_mutex);
-
- tda18271_release(fe);
- return NULL;
-}
-EXPORT_SYMBOL_GPL(tda18271_attach);
-MODULE_DESCRIPTION("NXP TDA18271HD analog / digital tuner driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.4");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/tda18271-maps.c b/drivers/media/common/tuners/tda18271-maps.c
deleted file mode 100644
index fb881c6..0000000
--- a/drivers/media/common/tuners/tda18271-maps.c
+++ /dev/null
@@ -1,1317 +0,0 @@
-/*
- tda18271-maps.c - driver for the Philips / NXP TDA18271 silicon tuner
-
- Copyright (C) 2007, 2008 Michael Krufky <mkrufky@linuxtv.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "tda18271-priv.h"
-
-struct tda18271_pll_map {
- u32 lomax;
- u8 pd; /* post div */
- u8 d; /* div */
-};
-
-struct tda18271_map {
- u32 rfmax;
- u8 val;
-};
-
-/*---------------------------------------------------------------------*/
-
-static struct tda18271_pll_map tda18271c1_main_pll[] = {
- { .lomax = 32000, .pd = 0x5f, .d = 0xf0 },
- { .lomax = 35000, .pd = 0x5e, .d = 0xe0 },
- { .lomax = 37000, .pd = 0x5d, .d = 0xd0 },
- { .lomax = 41000, .pd = 0x5c, .d = 0xc0 },
- { .lomax = 44000, .pd = 0x5b, .d = 0xb0 },
- { .lomax = 49000, .pd = 0x5a, .d = 0xa0 },
- { .lomax = 54000, .pd = 0x59, .d = 0x90 },
- { .lomax = 61000, .pd = 0x58, .d = 0x80 },
- { .lomax = 65000, .pd = 0x4f, .d = 0x78 },
- { .lomax = 70000, .pd = 0x4e, .d = 0x70 },
- { .lomax = 75000, .pd = 0x4d, .d = 0x68 },
- { .lomax = 82000, .pd = 0x4c, .d = 0x60 },
- { .lomax = 89000, .pd = 0x4b, .d = 0x58 },
- { .lomax = 98000, .pd = 0x4a, .d = 0x50 },
- { .lomax = 109000, .pd = 0x49, .d = 0x48 },
- { .lomax = 123000, .pd = 0x48, .d = 0x40 },
- { .lomax = 131000, .pd = 0x3f, .d = 0x3c },
- { .lomax = 141000, .pd = 0x3e, .d = 0x38 },
- { .lomax = 151000, .pd = 0x3d, .d = 0x34 },
- { .lomax = 164000, .pd = 0x3c, .d = 0x30 },
- { .lomax = 179000, .pd = 0x3b, .d = 0x2c },
- { .lomax = 197000, .pd = 0x3a, .d = 0x28 },
- { .lomax = 219000, .pd = 0x39, .d = 0x24 },
- { .lomax = 246000, .pd = 0x38, .d = 0x20 },
- { .lomax = 263000, .pd = 0x2f, .d = 0x1e },
- { .lomax = 282000, .pd = 0x2e, .d = 0x1c },
- { .lomax = 303000, .pd = 0x2d, .d = 0x1a },
- { .lomax = 329000, .pd = 0x2c, .d = 0x18 },
- { .lomax = 359000, .pd = 0x2b, .d = 0x16 },
- { .lomax = 395000, .pd = 0x2a, .d = 0x14 },
- { .lomax = 438000, .pd = 0x29, .d = 0x12 },
- { .lomax = 493000, .pd = 0x28, .d = 0x10 },
- { .lomax = 526000, .pd = 0x1f, .d = 0x0f },
- { .lomax = 564000, .pd = 0x1e, .d = 0x0e },
- { .lomax = 607000, .pd = 0x1d, .d = 0x0d },
- { .lomax = 658000, .pd = 0x1c, .d = 0x0c },
- { .lomax = 718000, .pd = 0x1b, .d = 0x0b },
- { .lomax = 790000, .pd = 0x1a, .d = 0x0a },
- { .lomax = 877000, .pd = 0x19, .d = 0x09 },
- { .lomax = 987000, .pd = 0x18, .d = 0x08 },
- { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */
-};
-
-static struct tda18271_pll_map tda18271c2_main_pll[] = {
- { .lomax = 33125, .pd = 0x57, .d = 0xf0 },
- { .lomax = 35500, .pd = 0x56, .d = 0xe0 },
- { .lomax = 38188, .pd = 0x55, .d = 0xd0 },
- { .lomax = 41375, .pd = 0x54, .d = 0xc0 },
- { .lomax = 45125, .pd = 0x53, .d = 0xb0 },
- { .lomax = 49688, .pd = 0x52, .d = 0xa0 },
- { .lomax = 55188, .pd = 0x51, .d = 0x90 },
- { .lomax = 62125, .pd = 0x50, .d = 0x80 },
- { .lomax = 66250, .pd = 0x47, .d = 0x78 },
- { .lomax = 71000, .pd = 0x46, .d = 0x70 },
- { .lomax = 76375, .pd = 0x45, .d = 0x68 },
- { .lomax = 82750, .pd = 0x44, .d = 0x60 },
- { .lomax = 90250, .pd = 0x43, .d = 0x58 },
- { .lomax = 99375, .pd = 0x42, .d = 0x50 },
- { .lomax = 110375, .pd = 0x41, .d = 0x48 },
- { .lomax = 124250, .pd = 0x40, .d = 0x40 },
- { .lomax = 132500, .pd = 0x37, .d = 0x3c },
- { .lomax = 142000, .pd = 0x36, .d = 0x38 },
- { .lomax = 152750, .pd = 0x35, .d = 0x34 },
- { .lomax = 165500, .pd = 0x34, .d = 0x30 },
- { .lomax = 180500, .pd = 0x33, .d = 0x2c },
- { .lomax = 198750, .pd = 0x32, .d = 0x28 },
- { .lomax = 220750, .pd = 0x31, .d = 0x24 },
- { .lomax = 248500, .pd = 0x30, .d = 0x20 },
- { .lomax = 265000, .pd = 0x27, .d = 0x1e },
- { .lomax = 284000, .pd = 0x26, .d = 0x1c },
- { .lomax = 305500, .pd = 0x25, .d = 0x1a },
- { .lomax = 331000, .pd = 0x24, .d = 0x18 },
- { .lomax = 361000, .pd = 0x23, .d = 0x16 },
- { .lomax = 397500, .pd = 0x22, .d = 0x14 },
- { .lomax = 441500, .pd = 0x21, .d = 0x12 },
- { .lomax = 497000, .pd = 0x20, .d = 0x10 },
- { .lomax = 530000, .pd = 0x17, .d = 0x0f },
- { .lomax = 568000, .pd = 0x16, .d = 0x0e },
- { .lomax = 611000, .pd = 0x15, .d = 0x0d },
- { .lomax = 662000, .pd = 0x14, .d = 0x0c },
- { .lomax = 722000, .pd = 0x13, .d = 0x0b },
- { .lomax = 795000, .pd = 0x12, .d = 0x0a },
- { .lomax = 883000, .pd = 0x11, .d = 0x09 },
- { .lomax = 994000, .pd = 0x10, .d = 0x08 },
- { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */
-};
-
-static struct tda18271_pll_map tda18271c1_cal_pll[] = {
- { .lomax = 33000, .pd = 0xdd, .d = 0xd0 },
- { .lomax = 36000, .pd = 0xdc, .d = 0xc0 },
- { .lomax = 40000, .pd = 0xdb, .d = 0xb0 },
- { .lomax = 44000, .pd = 0xda, .d = 0xa0 },
- { .lomax = 49000, .pd = 0xd9, .d = 0x90 },
- { .lomax = 55000, .pd = 0xd8, .d = 0x80 },
- { .lomax = 63000, .pd = 0xd3, .d = 0x70 },
- { .lomax = 67000, .pd = 0xcd, .d = 0x68 },
- { .lomax = 73000, .pd = 0xcc, .d = 0x60 },
- { .lomax = 80000, .pd = 0xcb, .d = 0x58 },
- { .lomax = 88000, .pd = 0xca, .d = 0x50 },
- { .lomax = 98000, .pd = 0xc9, .d = 0x48 },
- { .lomax = 110000, .pd = 0xc8, .d = 0x40 },
- { .lomax = 126000, .pd = 0xc3, .d = 0x38 },
- { .lomax = 135000, .pd = 0xbd, .d = 0x34 },
- { .lomax = 147000, .pd = 0xbc, .d = 0x30 },
- { .lomax = 160000, .pd = 0xbb, .d = 0x2c },
- { .lomax = 176000, .pd = 0xba, .d = 0x28 },
- { .lomax = 196000, .pd = 0xb9, .d = 0x24 },
- { .lomax = 220000, .pd = 0xb8, .d = 0x20 },
- { .lomax = 252000, .pd = 0xb3, .d = 0x1c },
- { .lomax = 271000, .pd = 0xad, .d = 0x1a },
- { .lomax = 294000, .pd = 0xac, .d = 0x18 },
- { .lomax = 321000, .pd = 0xab, .d = 0x16 },
- { .lomax = 353000, .pd = 0xaa, .d = 0x14 },
- { .lomax = 392000, .pd = 0xa9, .d = 0x12 },
- { .lomax = 441000, .pd = 0xa8, .d = 0x10 },
- { .lomax = 505000, .pd = 0xa3, .d = 0x0e },
- { .lomax = 543000, .pd = 0x9d, .d = 0x0d },
- { .lomax = 589000, .pd = 0x9c, .d = 0x0c },
- { .lomax = 642000, .pd = 0x9b, .d = 0x0b },
- { .lomax = 707000, .pd = 0x9a, .d = 0x0a },
- { .lomax = 785000, .pd = 0x99, .d = 0x09 },
- { .lomax = 883000, .pd = 0x98, .d = 0x08 },
- { .lomax = 1010000, .pd = 0x93, .d = 0x07 },
- { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */
-};
-
-static struct tda18271_pll_map tda18271c2_cal_pll[] = {
- { .lomax = 33813, .pd = 0xdd, .d = 0xd0 },
- { .lomax = 36625, .pd = 0xdc, .d = 0xc0 },
- { .lomax = 39938, .pd = 0xdb, .d = 0xb0 },
- { .lomax = 43938, .pd = 0xda, .d = 0xa0 },
- { .lomax = 48813, .pd = 0xd9, .d = 0x90 },
- { .lomax = 54938, .pd = 0xd8, .d = 0x80 },
- { .lomax = 62813, .pd = 0xd3, .d = 0x70 },
- { .lomax = 67625, .pd = 0xcd, .d = 0x68 },
- { .lomax = 73250, .pd = 0xcc, .d = 0x60 },
- { .lomax = 79875, .pd = 0xcb, .d = 0x58 },
- { .lomax = 87875, .pd = 0xca, .d = 0x50 },
- { .lomax = 97625, .pd = 0xc9, .d = 0x48 },
- { .lomax = 109875, .pd = 0xc8, .d = 0x40 },
- { .lomax = 125625, .pd = 0xc3, .d = 0x38 },
- { .lomax = 135250, .pd = 0xbd, .d = 0x34 },
- { .lomax = 146500, .pd = 0xbc, .d = 0x30 },
- { .lomax = 159750, .pd = 0xbb, .d = 0x2c },
- { .lomax = 175750, .pd = 0xba, .d = 0x28 },
- { .lomax = 195250, .pd = 0xb9, .d = 0x24 },
- { .lomax = 219750, .pd = 0xb8, .d = 0x20 },
- { .lomax = 251250, .pd = 0xb3, .d = 0x1c },
- { .lomax = 270500, .pd = 0xad, .d = 0x1a },
- { .lomax = 293000, .pd = 0xac, .d = 0x18 },
- { .lomax = 319500, .pd = 0xab, .d = 0x16 },
- { .lomax = 351500, .pd = 0xaa, .d = 0x14 },
- { .lomax = 390500, .pd = 0xa9, .d = 0x12 },
- { .lomax = 439500, .pd = 0xa8, .d = 0x10 },
- { .lomax = 502500, .pd = 0xa3, .d = 0x0e },
- { .lomax = 541000, .pd = 0x9d, .d = 0x0d },
- { .lomax = 586000, .pd = 0x9c, .d = 0x0c },
- { .lomax = 639000, .pd = 0x9b, .d = 0x0b },
- { .lomax = 703000, .pd = 0x9a, .d = 0x0a },
- { .lomax = 781000, .pd = 0x99, .d = 0x09 },
- { .lomax = 879000, .pd = 0x98, .d = 0x08 },
- { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */
-};
-
-static struct tda18271_map tda18271_bp_filter[] = {
- { .rfmax = 62000, .val = 0x00 },
- { .rfmax = 84000, .val = 0x01 },
- { .rfmax = 100000, .val = 0x02 },
- { .rfmax = 140000, .val = 0x03 },
- { .rfmax = 170000, .val = 0x04 },
- { .rfmax = 180000, .val = 0x05 },
- { .rfmax = 865000, .val = 0x06 },
- { .rfmax = 0, .val = 0x00 }, /* end */
-};
-
-static struct tda18271_map tda18271c1_km[] = {
- { .rfmax = 61100, .val = 0x74 },
- { .rfmax = 350000, .val = 0x40 },
- { .rfmax = 720000, .val = 0x30 },
- { .rfmax = 865000, .val = 0x40 },
- { .rfmax = 0, .val = 0x00 }, /* end */
-};
-
-static struct tda18271_map tda18271c2_km[] = {
- { .rfmax = 47900, .val = 0x38 },
- { .rfmax = 61100, .val = 0x44 },
- { .rfmax = 350000, .val = 0x30 },
- { .rfmax = 720000, .val = 0x24 },
- { .rfmax = 865000, .val = 0x3c },
- { .rfmax = 0, .val = 0x00 }, /* end */
-};
-
-static struct tda18271_map tda18271_rf_band[] = {
- { .rfmax = 47900, .val = 0x00 },
- { .rfmax = 61100, .val = 0x01 },
- { .rfmax = 152600, .val = 0x02 },
- { .rfmax = 164700, .val = 0x03 },
- { .rfmax = 203500, .val = 0x04 },
- { .rfmax = 457800, .val = 0x05 },
- { .rfmax = 865000, .val = 0x06 },
- { .rfmax = 0, .val = 0x00 }, /* end */
-};
-
-static struct tda18271_map tda18271_gain_taper[] = {
- { .rfmax = 45400, .val = 0x1f },
- { .rfmax = 45800, .val = 0x1e },
- { .rfmax = 46200, .val = 0x1d },
- { .rfmax = 46700, .val = 0x1c },
- { .rfmax = 47100, .val = 0x1b },
- { .rfmax = 47500, .val = 0x1a },
- { .rfmax = 47900, .val = 0x19 },
- { .rfmax = 49600, .val = 0x17 },
- { .rfmax = 51200, .val = 0x16 },
- { .rfmax = 52900, .val = 0x15 },
- { .rfmax = 54500, .val = 0x14 },
- { .rfmax = 56200, .val = 0x13 },
- { .rfmax = 57800, .val = 0x12 },
- { .rfmax = 59500, .val = 0x11 },
- { .rfmax = 61100, .val = 0x10 },
- { .rfmax = 67600, .val = 0x0d },
- { .rfmax = 74200, .val = 0x0c },
- { .rfmax = 80700, .val = 0x0b },
- { .rfmax = 87200, .val = 0x0a },
- { .rfmax = 93800, .val = 0x09 },
- { .rfmax = 100300, .val = 0x08 },
- { .rfmax = 106900, .val = 0x07 },
- { .rfmax = 113400, .val = 0x06 },
- { .rfmax = 119900, .val = 0x05 },
- { .rfmax = 126500, .val = 0x04 },
- { .rfmax = 133000, .val = 0x03 },
- { .rfmax = 139500, .val = 0x02 },
- { .rfmax = 146100, .val = 0x01 },
- { .rfmax = 152600, .val = 0x00 },
- { .rfmax = 154300, .val = 0x1f },
- { .rfmax = 156100, .val = 0x1e },
- { .rfmax = 157800, .val = 0x1d },
- { .rfmax = 159500, .val = 0x1c },
- { .rfmax = 161200, .val = 0x1b },
- { .rfmax = 163000, .val = 0x1a },
- { .rfmax = 164700, .val = 0x19 },
- { .rfmax = 170200, .val = 0x17 },
- { .rfmax = 175800, .val = 0x16 },
- { .rfmax = 181300, .val = 0x15 },
- { .rfmax = 186900, .val = 0x14 },
- { .rfmax = 192400, .val = 0x13 },
- { .rfmax = 198000, .val = 0x12 },
- { .rfmax = 203500, .val = 0x11 },
- { .rfmax = 216200, .val = 0x14 },
- { .rfmax = 228900, .val = 0x13 },
- { .rfmax = 241600, .val = 0x12 },
- { .rfmax = 254400, .val = 0x11 },
- { .rfmax = 267100, .val = 0x10 },
- { .rfmax = 279800, .val = 0x0f },
- { .rfmax = 292500, .val = 0x0e },
- { .rfmax = 305200, .val = 0x0d },
- { .rfmax = 317900, .val = 0x0c },
- { .rfmax = 330700, .val = 0x0b },
- { .rfmax = 343400, .val = 0x0a },
- { .rfmax = 356100, .val = 0x09 },
- { .rfmax = 368800, .val = 0x08 },
- { .rfmax = 381500, .val = 0x07 },
- { .rfmax = 394200, .val = 0x06 },
- { .rfmax = 406900, .val = 0x05 },
- { .rfmax = 419700, .val = 0x04 },
- { .rfmax = 432400, .val = 0x03 },
- { .rfmax = 445100, .val = 0x02 },
- { .rfmax = 457800, .val = 0x01 },
- { .rfmax = 476300, .val = 0x19 },
- { .rfmax = 494800, .val = 0x18 },
- { .rfmax = 513300, .val = 0x17 },
- { .rfmax = 531800, .val = 0x16 },
- { .rfmax = 550300, .val = 0x15 },
- { .rfmax = 568900, .val = 0x14 },
- { .rfmax = 587400, .val = 0x13 },
- { .rfmax = 605900, .val = 0x12 },
- { .rfmax = 624400, .val = 0x11 },
- { .rfmax = 642900, .val = 0x10 },
- { .rfmax = 661400, .val = 0x0f },
- { .rfmax = 679900, .val = 0x0e },
- { .rfmax = 698400, .val = 0x0d },
- { .rfmax = 716900, .val = 0x0c },
- { .rfmax = 735400, .val = 0x0b },
- { .rfmax = 753900, .val = 0x0a },
- { .rfmax = 772500, .val = 0x09 },
- { .rfmax = 791000, .val = 0x08 },
- { .rfmax = 809500, .val = 0x07 },
- { .rfmax = 828000, .val = 0x06 },
- { .rfmax = 846500, .val = 0x05 },
- { .rfmax = 865000, .val = 0x04 },
- { .rfmax = 0, .val = 0x00 }, /* end */
-};
-
-static struct tda18271_map tda18271c1_rf_cal[] = {
- { .rfmax = 41000, .val = 0x1e },
- { .rfmax = 43000, .val = 0x30 },
- { .rfmax = 45000, .val = 0x43 },
- { .rfmax = 46000, .val = 0x4d },
- { .rfmax = 47000, .val = 0x54 },
- { .rfmax = 47900, .val = 0x64 },
- { .rfmax = 49100, .val = 0x20 },
- { .rfmax = 50000, .val = 0x22 },
- { .rfmax = 51000, .val = 0x2a },
- { .rfmax = 53000, .val = 0x32 },
- { .rfmax = 55000, .val = 0x35 },
- { .rfmax = 56000, .val = 0x3c },
- { .rfmax = 57000, .val = 0x3f },
- { .rfmax = 58000, .val = 0x48 },
- { .rfmax = 59000, .val = 0x4d },
- { .rfmax = 60000, .val = 0x58 },
- { .rfmax = 61100, .val = 0x5f },
- { .rfmax = 0, .val = 0x00 }, /* end */
-};
-
-static struct tda18271_map tda18271c2_rf_cal[] = {
- { .rfmax = 41000, .val = 0x0f },
- { .rfmax = 43000, .val = 0x1c },
- { .rfmax = 45000, .val = 0x2f },
- { .rfmax = 46000, .val = 0x39 },
- { .rfmax = 47000, .val = 0x40 },
- { .rfmax = 47900, .val = 0x50 },
- { .rfmax = 49100, .val = 0x16 },
- { .rfmax = 50000, .val = 0x18 },
- { .rfmax = 51000, .val = 0x20 },
- { .rfmax = 53000, .val = 0x28 },
- { .rfmax = 55000, .val = 0x2b },
- { .rfmax = 56000, .val = 0x32 },
- { .rfmax = 57000, .val = 0x35 },
- { .rfmax = 58000, .val = 0x3e },
- { .rfmax = 59000, .val = 0x43 },
- { .rfmax = 60000, .val = 0x4e },
- { .rfmax = 61100, .val = 0x55 },
- { .rfmax = 63000, .val = 0x0f },
- { .rfmax = 64000, .val = 0x11 },
- { .rfmax = 65000, .val = 0x12 },
- { .rfmax = 66000, .val = 0x15 },
- { .rfmax = 67000, .val = 0x16 },
- { .rfmax = 68000, .val = 0x17 },
- { .rfmax = 70000, .val = 0x19 },
- { .rfmax = 71000, .val = 0x1c },
- { .rfmax = 72000, .val = 0x1d },
- { .rfmax = 73000, .val = 0x1f },
- { .rfmax = 74000, .val = 0x20 },
- { .rfmax = 75000, .val = 0x21 },
- { .rfmax = 76000, .val = 0x24 },
- { .rfmax = 77000, .val = 0x25 },
- { .rfmax = 78000, .val = 0x27 },
- { .rfmax = 80000, .val = 0x28 },
- { .rfmax = 81000, .val = 0x29 },
- { .rfmax = 82000, .val = 0x2d },
- { .rfmax = 83000, .val = 0x2e },
- { .rfmax = 84000, .val = 0x2f },
- { .rfmax = 85000, .val = 0x31 },
- { .rfmax = 86000, .val = 0x33 },
- { .rfmax = 87000, .val = 0x34 },
- { .rfmax = 88000, .val = 0x35 },
- { .rfmax = 89000, .val = 0x37 },
- { .rfmax = 90000, .val = 0x38 },
- { .rfmax = 91000, .val = 0x39 },
- { .rfmax = 93000, .val = 0x3c },
- { .rfmax = 94000, .val = 0x3e },
- { .rfmax = 95000, .val = 0x3f },
- { .rfmax = 96000, .val = 0x40 },
- { .rfmax = 97000, .val = 0x42 },
- { .rfmax = 99000, .val = 0x45 },
- { .rfmax = 100000, .val = 0x46 },
- { .rfmax = 102000, .val = 0x48 },
- { .rfmax = 103000, .val = 0x4a },
- { .rfmax = 105000, .val = 0x4d },
- { .rfmax = 106000, .val = 0x4e },
- { .rfmax = 107000, .val = 0x50 },
- { .rfmax = 108000, .val = 0x51 },
- { .rfmax = 110000, .val = 0x54 },
- { .rfmax = 111000, .val = 0x56 },
- { .rfmax = 112000, .val = 0x57 },
- { .rfmax = 113000, .val = 0x58 },
- { .rfmax = 114000, .val = 0x59 },
- { .rfmax = 115000, .val = 0x5c },
- { .rfmax = 116000, .val = 0x5d },
- { .rfmax = 117000, .val = 0x5f },
- { .rfmax = 119000, .val = 0x60 },
- { .rfmax = 120000, .val = 0x64 },
- { .rfmax = 121000, .val = 0x65 },
- { .rfmax = 122000, .val = 0x66 },
- { .rfmax = 123000, .val = 0x68 },
- { .rfmax = 124000, .val = 0x69 },
- { .rfmax = 125000, .val = 0x6c },
- { .rfmax = 126000, .val = 0x6d },
- { .rfmax = 127000, .val = 0x6e },
- { .rfmax = 128000, .val = 0x70 },
- { .rfmax = 129000, .val = 0x71 },
- { .rfmax = 130000, .val = 0x75 },
- { .rfmax = 131000, .val = 0x77 },
- { .rfmax = 132000, .val = 0x78 },
- { .rfmax = 133000, .val = 0x7b },
- { .rfmax = 134000, .val = 0x7e },
- { .rfmax = 135000, .val = 0x81 },
- { .rfmax = 136000, .val = 0x82 },
- { .rfmax = 137000, .val = 0x87 },
- { .rfmax = 138000, .val = 0x88 },
- { .rfmax = 139000, .val = 0x8d },
- { .rfmax = 140000, .val = 0x8e },
- { .rfmax = 141000, .val = 0x91 },
- { .rfmax = 142000, .val = 0x95 },
- { .rfmax = 143000, .val = 0x9a },
- { .rfmax = 144000, .val = 0x9d },
- { .rfmax = 145000, .val = 0xa1 },
- { .rfmax = 146000, .val = 0xa2 },
- { .rfmax = 147000, .val = 0xa4 },
- { .rfmax = 148000, .val = 0xa9 },
- { .rfmax = 149000, .val = 0xae },
- { .rfmax = 150000, .val = 0xb0 },
- { .rfmax = 151000, .val = 0xb1 },
- { .rfmax = 152000, .val = 0xb7 },
- { .rfmax = 152600, .val = 0xbd },
- { .rfmax = 154000, .val = 0x20 },
- { .rfmax = 155000, .val = 0x22 },
- { .rfmax = 156000, .val = 0x24 },
- { .rfmax = 157000, .val = 0x25 },
- { .rfmax = 158000, .val = 0x27 },
- { .rfmax = 159000, .val = 0x29 },
- { .rfmax = 160000, .val = 0x2c },
- { .rfmax = 161000, .val = 0x2d },
- { .rfmax = 163000, .val = 0x2e },
- { .rfmax = 164000, .val = 0x2f },
- { .rfmax = 164700, .val = 0x30 },
- { .rfmax = 166000, .val = 0x11 },
- { .rfmax = 167000, .val = 0x12 },
- { .rfmax = 168000, .val = 0x13 },
- { .rfmax = 169000, .val = 0x14 },
- { .rfmax = 170000, .val = 0x15 },
- { .rfmax = 172000, .val = 0x16 },
- { .rfmax = 173000, .val = 0x17 },
- { .rfmax = 174000, .val = 0x18 },
- { .rfmax = 175000, .val = 0x1a },
- { .rfmax = 176000, .val = 0x1b },
- { .rfmax = 178000, .val = 0x1d },
- { .rfmax = 179000, .val = 0x1e },
- { .rfmax = 180000, .val = 0x1f },
- { .rfmax = 181000, .val = 0x20 },
- { .rfmax = 182000, .val = 0x21 },
- { .rfmax = 183000, .val = 0x22 },
- { .rfmax = 184000, .val = 0x24 },
- { .rfmax = 185000, .val = 0x25 },
- { .rfmax = 186000, .val = 0x26 },
- { .rfmax = 187000, .val = 0x27 },
- { .rfmax = 188000, .val = 0x29 },
- { .rfmax = 189000, .val = 0x2a },
- { .rfmax = 190000, .val = 0x2c },
- { .rfmax = 191000, .val = 0x2d },
- { .rfmax = 192000, .val = 0x2e },
- { .rfmax = 193000, .val = 0x2f },
- { .rfmax = 194000, .val = 0x30 },
- { .rfmax = 195000, .val = 0x33 },
- { .rfmax = 196000, .val = 0x35 },
- { .rfmax = 198000, .val = 0x36 },
- { .rfmax = 200000, .val = 0x38 },
- { .rfmax = 201000, .val = 0x3c },
- { .rfmax = 202000, .val = 0x3d },
- { .rfmax = 203500, .val = 0x3e },
- { .rfmax = 206000, .val = 0x0e },
- { .rfmax = 208000, .val = 0x0f },
- { .rfmax = 212000, .val = 0x10 },
- { .rfmax = 216000, .val = 0x11 },
- { .rfmax = 217000, .val = 0x12 },
- { .rfmax = 218000, .val = 0x13 },
- { .rfmax = 220000, .val = 0x14 },
- { .rfmax = 222000, .val = 0x15 },
- { .rfmax = 225000, .val = 0x16 },
- { .rfmax = 228000, .val = 0x17 },
- { .rfmax = 231000, .val = 0x18 },
- { .rfmax = 234000, .val = 0x19 },
- { .rfmax = 235000, .val = 0x1a },
- { .rfmax = 236000, .val = 0x1b },
- { .rfmax = 237000, .val = 0x1c },
- { .rfmax = 240000, .val = 0x1d },
- { .rfmax = 242000, .val = 0x1e },
- { .rfmax = 244000, .val = 0x1f },
- { .rfmax = 247000, .val = 0x20 },
- { .rfmax = 249000, .val = 0x21 },
- { .rfmax = 252000, .val = 0x22 },
- { .rfmax = 253000, .val = 0x23 },
- { .rfmax = 254000, .val = 0x24 },
- { .rfmax = 256000, .val = 0x25 },
- { .rfmax = 259000, .val = 0x26 },
- { .rfmax = 262000, .val = 0x27 },
- { .rfmax = 264000, .val = 0x28 },
- { .rfmax = 267000, .val = 0x29 },
- { .rfmax = 269000, .val = 0x2a },
- { .rfmax = 271000, .val = 0x2b },
- { .rfmax = 273000, .val = 0x2c },
- { .rfmax = 275000, .val = 0x2d },
- { .rfmax = 277000, .val = 0x2e },
- { .rfmax = 279000, .val = 0x2f },
- { .rfmax = 282000, .val = 0x30 },
- { .rfmax = 284000, .val = 0x31 },
- { .rfmax = 286000, .val = 0x32 },
- { .rfmax = 287000, .val = 0x33 },
- { .rfmax = 290000, .val = 0x34 },
- { .rfmax = 293000, .val = 0x35 },
- { .rfmax = 295000, .val = 0x36 },
- { .rfmax = 297000, .val = 0x37 },
- { .rfmax = 300000, .val = 0x38 },
- { .rfmax = 303000, .val = 0x39 },
- { .rfmax = 305000, .val = 0x3a },
- { .rfmax = 306000, .val = 0x3b },
- { .rfmax = 307000, .val = 0x3c },
- { .rfmax = 310000, .val = 0x3d },
- { .rfmax = 312000, .val = 0x3e },
- { .rfmax = 315000, .val = 0x3f },
- { .rfmax = 318000, .val = 0x40 },
- { .rfmax = 320000, .val = 0x41 },
- { .rfmax = 323000, .val = 0x42 },
- { .rfmax = 324000, .val = 0x43 },
- { .rfmax = 325000, .val = 0x44 },
- { .rfmax = 327000, .val = 0x45 },
- { .rfmax = 331000, .val = 0x46 },
- { .rfmax = 334000, .val = 0x47 },
- { .rfmax = 337000, .val = 0x48 },
- { .rfmax = 339000, .val = 0x49 },
- { .rfmax = 340000, .val = 0x4a },
- { .rfmax = 341000, .val = 0x4b },
- { .rfmax = 343000, .val = 0x4c },
- { .rfmax = 345000, .val = 0x4d },
- { .rfmax = 349000, .val = 0x4e },
- { .rfmax = 352000, .val = 0x4f },
- { .rfmax = 353000, .val = 0x50 },
- { .rfmax = 355000, .val = 0x51 },
- { .rfmax = 357000, .val = 0x52 },
- { .rfmax = 359000, .val = 0x53 },
- { .rfmax = 361000, .val = 0x54 },
- { .rfmax = 362000, .val = 0x55 },
- { .rfmax = 364000, .val = 0x56 },
- { .rfmax = 368000, .val = 0x57 },
- { .rfmax = 370000, .val = 0x58 },
- { .rfmax = 372000, .val = 0x59 },
- { .rfmax = 375000, .val = 0x5a },
- { .rfmax = 376000, .val = 0x5b },
- { .rfmax = 377000, .val = 0x5c },
- { .rfmax = 379000, .val = 0x5d },
- { .rfmax = 382000, .val = 0x5e },
- { .rfmax = 384000, .val = 0x5f },
- { .rfmax = 385000, .val = 0x60 },
- { .rfmax = 386000, .val = 0x61 },
- { .rfmax = 388000, .val = 0x62 },
- { .rfmax = 390000, .val = 0x63 },
- { .rfmax = 393000, .val = 0x64 },
- { .rfmax = 394000, .val = 0x65 },
- { .rfmax = 396000, .val = 0x66 },
- { .rfmax = 397000, .val = 0x67 },
- { .rfmax = 398000, .val = 0x68 },
- { .rfmax = 400000, .val = 0x69 },
- { .rfmax = 402000, .val = 0x6a },
- { .rfmax = 403000, .val = 0x6b },
- { .rfmax = 407000, .val = 0x6c },
- { .rfmax = 408000, .val = 0x6d },
- { .rfmax = 409000, .val = 0x6e },
- { .rfmax = 410000, .val = 0x6f },
- { .rfmax = 411000, .val = 0x70 },
- { .rfmax = 412000, .val = 0x71 },
- { .rfmax = 413000, .val = 0x72 },
- { .rfmax = 414000, .val = 0x73 },
- { .rfmax = 417000, .val = 0x74 },
- { .rfmax = 418000, .val = 0x75 },
- { .rfmax = 420000, .val = 0x76 },
- { .rfmax = 422000, .val = 0x77 },
- { .rfmax = 423000, .val = 0x78 },
- { .rfmax = 424000, .val = 0x79 },
- { .rfmax = 427000, .val = 0x7a },
- { .rfmax = 428000, .val = 0x7b },
- { .rfmax = 429000, .val = 0x7d },
- { .rfmax = 432000, .val = 0x7f },
- { .rfmax = 434000, .val = 0x80 },
- { .rfmax = 435000, .val = 0x81 },
- { .rfmax = 436000, .val = 0x83 },
- { .rfmax = 437000, .val = 0x84 },
- { .rfmax = 438000, .val = 0x85 },
- { .rfmax = 439000, .val = 0x86 },
- { .rfmax = 440000, .val = 0x87 },
- { .rfmax = 441000, .val = 0x88 },
- { .rfmax = 442000, .val = 0x89 },
- { .rfmax = 445000, .val = 0x8a },
- { .rfmax = 446000, .val = 0x8b },
- { .rfmax = 447000, .val = 0x8c },
- { .rfmax = 448000, .val = 0x8e },
- { .rfmax = 449000, .val = 0x8f },
- { .rfmax = 450000, .val = 0x90 },
- { .rfmax = 452000, .val = 0x91 },
- { .rfmax = 453000, .val = 0x93 },
- { .rfmax = 454000, .val = 0x94 },
- { .rfmax = 456000, .val = 0x96 },
- { .rfmax = 457800, .val = 0x98 },
- { .rfmax = 461000, .val = 0x11 },
- { .rfmax = 468000, .val = 0x12 },
- { .rfmax = 472000, .val = 0x13 },
- { .rfmax = 473000, .val = 0x14 },
- { .rfmax = 474000, .val = 0x15 },
- { .rfmax = 481000, .val = 0x16 },
- { .rfmax = 486000, .val = 0x17 },
- { .rfmax = 491000, .val = 0x18 },
- { .rfmax = 498000, .val = 0x19 },
- { .rfmax = 499000, .val = 0x1a },
- { .rfmax = 501000, .val = 0x1b },
- { .rfmax = 506000, .val = 0x1c },
- { .rfmax = 511000, .val = 0x1d },
- { .rfmax = 516000, .val = 0x1e },
- { .rfmax = 520000, .val = 0x1f },
- { .rfmax = 521000, .val = 0x20 },
- { .rfmax = 525000, .val = 0x21 },
- { .rfmax = 529000, .val = 0x22 },
- { .rfmax = 533000, .val = 0x23 },
- { .rfmax = 539000, .val = 0x24 },
- { .rfmax = 541000, .val = 0x25 },
- { .rfmax = 547000, .val = 0x26 },
- { .rfmax = 549000, .val = 0x27 },
- { .rfmax = 551000, .val = 0x28 },
- { .rfmax = 556000, .val = 0x29 },
- { .rfmax = 561000, .val = 0x2a },
- { .rfmax = 563000, .val = 0x2b },
- { .rfmax = 565000, .val = 0x2c },
- { .rfmax = 569000, .val = 0x2d },
- { .rfmax = 571000, .val = 0x2e },
- { .rfmax = 577000, .val = 0x2f },
- { .rfmax = 580000, .val = 0x30 },
- { .rfmax = 582000, .val = 0x31 },
- { .rfmax = 584000, .val = 0x32 },
- { .rfmax = 588000, .val = 0x33 },
- { .rfmax = 591000, .val = 0x34 },
- { .rfmax = 596000, .val = 0x35 },
- { .rfmax = 598000, .val = 0x36 },
- { .rfmax = 603000, .val = 0x37 },
- { .rfmax = 604000, .val = 0x38 },
- { .rfmax = 606000, .val = 0x39 },
- { .rfmax = 612000, .val = 0x3a },
- { .rfmax = 615000, .val = 0x3b },
- { .rfmax = 617000, .val = 0x3c },
- { .rfmax = 621000, .val = 0x3d },
- { .rfmax = 622000, .val = 0x3e },
- { .rfmax = 625000, .val = 0x3f },
- { .rfmax = 632000, .val = 0x40 },
- { .rfmax = 633000, .val = 0x41 },
- { .rfmax = 634000, .val = 0x42 },
- { .rfmax = 642000, .val = 0x43 },
- { .rfmax = 643000, .val = 0x44 },
- { .rfmax = 647000, .val = 0x45 },
- { .rfmax = 650000, .val = 0x46 },
- { .rfmax = 652000, .val = 0x47 },
- { .rfmax = 657000, .val = 0x48 },
- { .rfmax = 661000, .val = 0x49 },
- { .rfmax = 662000, .val = 0x4a },
- { .rfmax = 665000, .val = 0x4b },
- { .rfmax = 667000, .val = 0x4c },
- { .rfmax = 670000, .val = 0x4d },
- { .rfmax = 673000, .val = 0x4e },
- { .rfmax = 676000, .val = 0x4f },
- { .rfmax = 677000, .val = 0x50 },
- { .rfmax = 681000, .val = 0x51 },
- { .rfmax = 683000, .val = 0x52 },
- { .rfmax = 686000, .val = 0x53 },
- { .rfmax = 688000, .val = 0x54 },
- { .rfmax = 689000, .val = 0x55 },
- { .rfmax = 691000, .val = 0x56 },
- { .rfmax = 695000, .val = 0x57 },
- { .rfmax = 698000, .val = 0x58 },
- { .rfmax = 703000, .val = 0x59 },
- { .rfmax = 704000, .val = 0x5a },
- { .rfmax = 705000, .val = 0x5b },
- { .rfmax = 707000, .val = 0x5c },
- { .rfmax = 710000, .val = 0x5d },
- { .rfmax = 712000, .val = 0x5e },
- { .rfmax = 717000, .val = 0x5f },
- { .rfmax = 718000, .val = 0x60 },
- { .rfmax = 721000, .val = 0x61 },
- { .rfmax = 722000, .val = 0x62 },
- { .rfmax = 723000, .val = 0x63 },
- { .rfmax = 725000, .val = 0x64 },
- { .rfmax = 727000, .val = 0x65 },
- { .rfmax = 730000, .val = 0x66 },
- { .rfmax = 732000, .val = 0x67 },
- { .rfmax = 735000, .val = 0x68 },
- { .rfmax = 740000, .val = 0x69 },
- { .rfmax = 741000, .val = 0x6a },
- { .rfmax = 742000, .val = 0x6b },
- { .rfmax = 743000, .val = 0x6c },
- { .rfmax = 745000, .val = 0x6d },
- { .rfmax = 747000, .val = 0x6e },
- { .rfmax = 748000, .val = 0x6f },
- { .rfmax = 750000, .val = 0x70 },
- { .rfmax = 752000, .val = 0x71 },
- { .rfmax = 754000, .val = 0x72 },
- { .rfmax = 757000, .val = 0x73 },
- { .rfmax = 758000, .val = 0x74 },
- { .rfmax = 760000, .val = 0x75 },
- { .rfmax = 763000, .val = 0x76 },
- { .rfmax = 764000, .val = 0x77 },
- { .rfmax = 766000, .val = 0x78 },
- { .rfmax = 767000, .val = 0x79 },
- { .rfmax = 768000, .val = 0x7a },
- { .rfmax = 773000, .val = 0x7b },
- { .rfmax = 774000, .val = 0x7c },
- { .rfmax = 776000, .val = 0x7d },
- { .rfmax = 777000, .val = 0x7e },
- { .rfmax = 778000, .val = 0x7f },
- { .rfmax = 779000, .val = 0x80 },
- { .rfmax = 781000, .val = 0x81 },
- { .rfmax = 783000, .val = 0x82 },
- { .rfmax = 784000, .val = 0x83 },
- { .rfmax = 785000, .val = 0x84 },
- { .rfmax = 786000, .val = 0x85 },
- { .rfmax = 793000, .val = 0x86 },
- { .rfmax = 794000, .val = 0x87 },
- { .rfmax = 795000, .val = 0x88 },
- { .rfmax = 797000, .val = 0x89 },
- { .rfmax = 799000, .val = 0x8a },
- { .rfmax = 801000, .val = 0x8b },
- { .rfmax = 802000, .val = 0x8c },
- { .rfmax = 803000, .val = 0x8d },
- { .rfmax = 804000, .val = 0x8e },
- { .rfmax = 810000, .val = 0x90 },
- { .rfmax = 811000, .val = 0x91 },
- { .rfmax = 812000, .val = 0x92 },
- { .rfmax = 814000, .val = 0x93 },
- { .rfmax = 816000, .val = 0x94 },
- { .rfmax = 817000, .val = 0x96 },
- { .rfmax = 818000, .val = 0x97 },
- { .rfmax = 820000, .val = 0x98 },
- { .rfmax = 821000, .val = 0x99 },
- { .rfmax = 822000, .val = 0x9a },
- { .rfmax = 828000, .val = 0x9b },
- { .rfmax = 829000, .val = 0x9d },
- { .rfmax = 830000, .val = 0x9f },
- { .rfmax = 831000, .val = 0xa0 },
- { .rfmax = 833000, .val = 0xa1 },
- { .rfmax = 835000, .val = 0xa2 },
- { .rfmax = 836000, .val = 0xa3 },
- { .rfmax = 837000, .val = 0xa4 },
- { .rfmax = 838000, .val = 0xa6 },
- { .rfmax = 840000, .val = 0xa8 },
- { .rfmax = 842000, .val = 0xa9 },
- { .rfmax = 845000, .val = 0xaa },
- { .rfmax = 846000, .val = 0xab },
- { .rfmax = 847000, .val = 0xad },
- { .rfmax = 848000, .val = 0xae },
- { .rfmax = 852000, .val = 0xaf },
- { .rfmax = 853000, .val = 0xb0 },
- { .rfmax = 858000, .val = 0xb1 },
- { .rfmax = 860000, .val = 0xb2 },
- { .rfmax = 861000, .val = 0xb3 },
- { .rfmax = 862000, .val = 0xb4 },
- { .rfmax = 863000, .val = 0xb6 },
- { .rfmax = 864000, .val = 0xb8 },
- { .rfmax = 865000, .val = 0xb9 },
- { .rfmax = 0, .val = 0x00 }, /* end */
-};
-
-static struct tda18271_map tda18271_ir_measure[] = {
- { .rfmax = 30000, .val = 4 },
- { .rfmax = 200000, .val = 5 },
- { .rfmax = 600000, .val = 6 },
- { .rfmax = 865000, .val = 7 },
- { .rfmax = 0, .val = 0 }, /* end */
-};
-
-static struct tda18271_map tda18271_rf_cal_dc_over_dt[] = {
- { .rfmax = 47900, .val = 0x00 },
- { .rfmax = 55000, .val = 0x00 },
- { .rfmax = 61100, .val = 0x0a },
- { .rfmax = 64000, .val = 0x0a },
- { .rfmax = 82000, .val = 0x14 },
- { .rfmax = 84000, .val = 0x19 },
- { .rfmax = 119000, .val = 0x1c },
- { .rfmax = 124000, .val = 0x20 },
- { .rfmax = 129000, .val = 0x2a },
- { .rfmax = 134000, .val = 0x32 },
- { .rfmax = 139000, .val = 0x39 },
- { .rfmax = 144000, .val = 0x3e },
- { .rfmax = 149000, .val = 0x3f },
- { .rfmax = 152600, .val = 0x40 },
- { .rfmax = 154000, .val = 0x40 },
- { .rfmax = 164700, .val = 0x41 },
- { .rfmax = 203500, .val = 0x32 },
- { .rfmax = 353000, .val = 0x19 },
- { .rfmax = 356000, .val = 0x1a },
- { .rfmax = 359000, .val = 0x1b },
- { .rfmax = 363000, .val = 0x1c },
- { .rfmax = 366000, .val = 0x1d },
- { .rfmax = 369000, .val = 0x1e },
- { .rfmax = 373000, .val = 0x1f },
- { .rfmax = 376000, .val = 0x20 },
- { .rfmax = 379000, .val = 0x21 },
- { .rfmax = 383000, .val = 0x22 },
- { .rfmax = 386000, .val = 0x23 },
- { .rfmax = 389000, .val = 0x24 },
- { .rfmax = 393000, .val = 0x25 },
- { .rfmax = 396000, .val = 0x26 },
- { .rfmax = 399000, .val = 0x27 },
- { .rfmax = 402000, .val = 0x28 },
- { .rfmax = 404000, .val = 0x29 },
- { .rfmax = 407000, .val = 0x2a },
- { .rfmax = 409000, .val = 0x2b },
- { .rfmax = 412000, .val = 0x2c },
- { .rfmax = 414000, .val = 0x2d },
- { .rfmax = 417000, .val = 0x2e },
- { .rfmax = 419000, .val = 0x2f },
- { .rfmax = 422000, .val = 0x30 },
- { .rfmax = 424000, .val = 0x31 },
- { .rfmax = 427000, .val = 0x32 },
- { .rfmax = 429000, .val = 0x33 },
- { .rfmax = 432000, .val = 0x34 },
- { .rfmax = 434000, .val = 0x35 },
- { .rfmax = 437000, .val = 0x36 },
- { .rfmax = 439000, .val = 0x37 },
- { .rfmax = 442000, .val = 0x38 },
- { .rfmax = 444000, .val = 0x39 },
- { .rfmax = 447000, .val = 0x3a },
- { .rfmax = 449000, .val = 0x3b },
- { .rfmax = 457800, .val = 0x3c },
- { .rfmax = 465000, .val = 0x0f },
- { .rfmax = 477000, .val = 0x12 },
- { .rfmax = 483000, .val = 0x14 },
- { .rfmax = 502000, .val = 0x19 },
- { .rfmax = 508000, .val = 0x1b },
- { .rfmax = 519000, .val = 0x1c },
- { .rfmax = 522000, .val = 0x1d },
- { .rfmax = 524000, .val = 0x1e },
- { .rfmax = 534000, .val = 0x1f },
- { .rfmax = 549000, .val = 0x20 },
- { .rfmax = 554000, .val = 0x22 },
- { .rfmax = 584000, .val = 0x24 },
- { .rfmax = 589000, .val = 0x26 },
- { .rfmax = 658000, .val = 0x27 },
- { .rfmax = 664000, .val = 0x2c },
- { .rfmax = 669000, .val = 0x2d },
- { .rfmax = 699000, .val = 0x2e },
- { .rfmax = 704000, .val = 0x30 },
- { .rfmax = 709000, .val = 0x31 },
- { .rfmax = 714000, .val = 0x32 },
- { .rfmax = 724000, .val = 0x33 },
- { .rfmax = 729000, .val = 0x36 },
- { .rfmax = 739000, .val = 0x38 },
- { .rfmax = 744000, .val = 0x39 },
- { .rfmax = 749000, .val = 0x3b },
- { .rfmax = 754000, .val = 0x3c },
- { .rfmax = 759000, .val = 0x3d },
- { .rfmax = 764000, .val = 0x3e },
- { .rfmax = 769000, .val = 0x3f },
- { .rfmax = 774000, .val = 0x40 },
- { .rfmax = 779000, .val = 0x41 },
- { .rfmax = 784000, .val = 0x43 },
- { .rfmax = 789000, .val = 0x46 },
- { .rfmax = 794000, .val = 0x48 },
- { .rfmax = 799000, .val = 0x4b },
- { .rfmax = 804000, .val = 0x4f },
- { .rfmax = 809000, .val = 0x54 },
- { .rfmax = 814000, .val = 0x59 },
- { .rfmax = 819000, .val = 0x5d },
- { .rfmax = 824000, .val = 0x61 },
- { .rfmax = 829000, .val = 0x68 },
- { .rfmax = 834000, .val = 0x6e },
- { .rfmax = 839000, .val = 0x75 },
- { .rfmax = 844000, .val = 0x7e },
- { .rfmax = 849000, .val = 0x82 },
- { .rfmax = 854000, .val = 0x84 },
- { .rfmax = 859000, .val = 0x8f },
- { .rfmax = 865000, .val = 0x9a },
- { .rfmax = 0, .val = 0x00 }, /* end */
-};
-
-/*---------------------------------------------------------------------*/
-
-struct tda18271_thermo_map {
- u8 d;
- u8 r0;
- u8 r1;
-};
-
-static struct tda18271_thermo_map tda18271_thermometer[] = {
- { .d = 0x00, .r0 = 60, .r1 = 92 },
- { .d = 0x01, .r0 = 62, .r1 = 94 },
- { .d = 0x02, .r0 = 66, .r1 = 98 },
- { .d = 0x03, .r0 = 64, .r1 = 96 },
- { .d = 0x04, .r0 = 74, .r1 = 106 },
- { .d = 0x05, .r0 = 72, .r1 = 104 },
- { .d = 0x06, .r0 = 68, .r1 = 100 },
- { .d = 0x07, .r0 = 70, .r1 = 102 },
- { .d = 0x08, .r0 = 90, .r1 = 122 },
- { .d = 0x09, .r0 = 88, .r1 = 120 },
- { .d = 0x0a, .r0 = 84, .r1 = 116 },
- { .d = 0x0b, .r0 = 86, .r1 = 118 },
- { .d = 0x0c, .r0 = 76, .r1 = 108 },
- { .d = 0x0d, .r0 = 78, .r1 = 110 },
- { .d = 0x0e, .r0 = 82, .r1 = 114 },
- { .d = 0x0f, .r0 = 80, .r1 = 112 },
- { .d = 0x00, .r0 = 0, .r1 = 0 }, /* end */
-};
-
-int tda18271_lookup_thermometer(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- unsigned char *regs = priv->tda18271_regs;
- int val, i = 0;
-
- while (tda18271_thermometer[i].d < (regs[R_TM] & 0x0f)) {
- if (tda18271_thermometer[i + 1].d == 0)
- break;
- i++;
- }
-
- if ((regs[R_TM] & 0x20) == 0x20)
- val = tda18271_thermometer[i].r1;
- else
- val = tda18271_thermometer[i].r0;
-
- tda_map("(%d) tm = %d\n", i, val);
-
- return val;
-}
-
-/*---------------------------------------------------------------------*/
-
-struct tda18271_cid_target_map {
- u32 rfmax;
- u8 target;
- u16 limit;
-};
-
-static struct tda18271_cid_target_map tda18271_cid_target[] = {
- { .rfmax = 46000, .target = 0x04, .limit = 1800 },
- { .rfmax = 52200, .target = 0x0a, .limit = 1500 },
- { .rfmax = 70100, .target = 0x01, .limit = 4000 },
- { .rfmax = 136800, .target = 0x18, .limit = 4000 },
- { .rfmax = 156700, .target = 0x18, .limit = 4000 },
- { .rfmax = 186250, .target = 0x0a, .limit = 4000 },
- { .rfmax = 230000, .target = 0x0a, .limit = 4000 },
- { .rfmax = 345000, .target = 0x18, .limit = 4000 },
- { .rfmax = 426000, .target = 0x0e, .limit = 4000 },
- { .rfmax = 489500, .target = 0x1e, .limit = 4000 },
- { .rfmax = 697500, .target = 0x32, .limit = 4000 },
- { .rfmax = 842000, .target = 0x3a, .limit = 4000 },
- { .rfmax = 0, .target = 0x00, .limit = 0 }, /* end */
-};
-
-int tda18271_lookup_cid_target(struct dvb_frontend *fe,
- u32 *freq, u8 *cid_target, u16 *count_limit)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- int i = 0;
-
- while ((tda18271_cid_target[i].rfmax * 1000) < *freq) {
- if (tda18271_cid_target[i + 1].rfmax == 0)
- break;
- i++;
- }
- *cid_target = tda18271_cid_target[i].target;
- *count_limit = tda18271_cid_target[i].limit;
-
- tda_map("(%d) cid_target = %02x, count_limit = %d\n", i,
- tda18271_cid_target[i].target, tda18271_cid_target[i].limit);
-
- return 0;
-}
-
-/*---------------------------------------------------------------------*/
-
-static struct tda18271_rf_tracking_filter_cal tda18271_rf_band_template[] = {
- { .rfmax = 47900, .rfband = 0x00,
- .rf1_def = 46000, .rf2_def = 0, .rf3_def = 0 },
- { .rfmax = 61100, .rfband = 0x01,
- .rf1_def = 52200, .rf2_def = 0, .rf3_def = 0 },
- { .rfmax = 152600, .rfband = 0x02,
- .rf1_def = 70100, .rf2_def = 136800, .rf3_def = 0 },
- { .rfmax = 164700, .rfband = 0x03,
- .rf1_def = 156700, .rf2_def = 0, .rf3_def = 0 },
- { .rfmax = 203500, .rfband = 0x04,
- .rf1_def = 186250, .rf2_def = 0, .rf3_def = 0 },
- { .rfmax = 457800, .rfband = 0x05,
- .rf1_def = 230000, .rf2_def = 345000, .rf3_def = 426000 },
- { .rfmax = 865000, .rfband = 0x06,
- .rf1_def = 489500, .rf2_def = 697500, .rf3_def = 842000 },
- { .rfmax = 0, .rfband = 0x00,
- .rf1_def = 0, .rf2_def = 0, .rf3_def = 0 }, /* end */
-};
-
-int tda18271_lookup_rf_band(struct dvb_frontend *fe, u32 *freq, u8 *rf_band)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state;
- int i = 0;
-
- while ((map[i].rfmax * 1000) < *freq) {
- if (tda18271_debug & DBG_ADV)
- tda_map("(%d) rfmax = %d < freq = %d, "
- "rf1_def = %d, rf2_def = %d, rf3_def = %d, "
- "rf1 = %d, rf2 = %d, rf3 = %d, "
- "rf_a1 = %d, rf_a2 = %d, "
- "rf_b1 = %d, rf_b2 = %d\n",
- i, map[i].rfmax * 1000, *freq,
- map[i].rf1_def, map[i].rf2_def, map[i].rf3_def,
- map[i].rf1, map[i].rf2, map[i].rf3,
- map[i].rf_a1, map[i].rf_a2,
- map[i].rf_b1, map[i].rf_b2);
- if (map[i].rfmax == 0)
- return -EINVAL;
- i++;
- }
- if (rf_band)
- *rf_band = map[i].rfband;
-
- tda_map("(%d) rf_band = %02x\n", i, map[i].rfband);
-
- return i;
-}
-
-/*---------------------------------------------------------------------*/
-
-struct tda18271_map_layout {
- struct tda18271_pll_map *main_pll;
- struct tda18271_pll_map *cal_pll;
-
- struct tda18271_map *rf_cal;
- struct tda18271_map *rf_cal_kmco;
- struct tda18271_map *rf_cal_dc_over_dt;
-
- struct tda18271_map *bp_filter;
- struct tda18271_map *rf_band;
- struct tda18271_map *gain_taper;
- struct tda18271_map *ir_measure;
-};
-
-/*---------------------------------------------------------------------*/
-
-int tda18271_lookup_pll_map(struct dvb_frontend *fe,
- enum tda18271_map_type map_type,
- u32 *freq, u8 *post_div, u8 *div)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_pll_map *map = NULL;
- unsigned int i = 0;
- char *map_name;
- int ret = 0;
-
- BUG_ON(!priv->maps);
-
- switch (map_type) {
- case MAIN_PLL:
- map = priv->maps->main_pll;
- map_name = "main_pll";
- break;
- case CAL_PLL:
- map = priv->maps->cal_pll;
- map_name = "cal_pll";
- break;
- default:
- /* we should never get here */
- map_name = "undefined";
- break;
- }
-
- if (!map) {
- tda_warn("%s map is not set!\n", map_name);
- ret = -EINVAL;
- goto fail;
- }
-
- while ((map[i].lomax * 1000) < *freq) {
- if (map[i + 1].lomax == 0) {
- tda_map("%s: frequency (%d) out of range\n",
- map_name, *freq);
- ret = -ERANGE;
- break;
- }
- i++;
- }
- *post_div = map[i].pd;
- *div = map[i].d;
-
- tda_map("(%d) %s: post div = 0x%02x, div = 0x%02x\n",
- i, map_name, *post_div, *div);
-fail:
- return ret;
-}
-
-int tda18271_lookup_map(struct dvb_frontend *fe,
- enum tda18271_map_type map_type,
- u32 *freq, u8 *val)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- struct tda18271_map *map = NULL;
- unsigned int i = 0;
- char *map_name;
- int ret = 0;
-
- BUG_ON(!priv->maps);
-
- switch (map_type) {
- case BP_FILTER:
- map = priv->maps->bp_filter;
- map_name = "bp_filter";
- break;
- case RF_CAL_KMCO:
- map = priv->maps->rf_cal_kmco;
- map_name = "km";
- break;
- case RF_BAND:
- map = priv->maps->rf_band;
- map_name = "rf_band";
- break;
- case GAIN_TAPER:
- map = priv->maps->gain_taper;
- map_name = "gain_taper";
- break;
- case RF_CAL:
- map = priv->maps->rf_cal;
- map_name = "rf_cal";
- break;
- case IR_MEASURE:
- map = priv->maps->ir_measure;
- map_name = "ir_measure";
- break;
- case RF_CAL_DC_OVER_DT:
- map = priv->maps->rf_cal_dc_over_dt;
- map_name = "rf_cal_dc_over_dt";
- break;
- default:
- /* we should never get here */
- map_name = "undefined";
- break;
- }
-
- if (!map) {
- tda_warn("%s map is not set!\n", map_name);
- ret = -EINVAL;
- goto fail;
- }
-
- while ((map[i].rfmax * 1000) < *freq) {
- if (map[i + 1].rfmax == 0) {
- tda_map("%s: frequency (%d) out of range\n",
- map_name, *freq);
- ret = -ERANGE;
- break;
- }
- i++;
- }
- *val = map[i].val;
-
- tda_map("(%d) %s: 0x%02x\n", i, map_name, *val);
-fail:
- return ret;
-}
-
-/*---------------------------------------------------------------------*/
-
-static struct tda18271_std_map tda18271c1_std_map = {
- .fm_radio = { .if_freq = 1250, .fm_rfn = 1, .agc_mode = 3, .std = 0,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x18 */
- .atv_b = { .if_freq = 6750, .fm_rfn = 0, .agc_mode = 1, .std = 6,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */
- .atv_dk = { .if_freq = 7750, .fm_rfn = 0, .agc_mode = 1, .std = 7,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */
- .atv_gh = { .if_freq = 7750, .fm_rfn = 0, .agc_mode = 1, .std = 7,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */
- .atv_i = { .if_freq = 7750, .fm_rfn = 0, .agc_mode = 1, .std = 7,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */
- .atv_l = { .if_freq = 7750, .fm_rfn = 0, .agc_mode = 1, .std = 7,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */
- .atv_lc = { .if_freq = 1250, .fm_rfn = 0, .agc_mode = 1, .std = 7,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0f */
- .atv_mn = { .if_freq = 5750, .fm_rfn = 0, .agc_mode = 1, .std = 5,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0d */
- .atsc_6 = { .if_freq = 3250, .fm_rfn = 0, .agc_mode = 3, .std = 4,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */
- .dvbt_6 = { .if_freq = 3300, .fm_rfn = 0, .agc_mode = 3, .std = 4,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */
- .dvbt_7 = { .if_freq = 3800, .fm_rfn = 0, .agc_mode = 3, .std = 5,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1d */
- .dvbt_8 = { .if_freq = 4300, .fm_rfn = 0, .agc_mode = 3, .std = 6,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1e */
- .qam_6 = { .if_freq = 4000, .fm_rfn = 0, .agc_mode = 3, .std = 5,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1d */
- .qam_7 = { .if_freq = 4500, .fm_rfn = 0, .agc_mode = 3, .std = 6,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1e */
- .qam_8 = { .if_freq = 5000, .fm_rfn = 0, .agc_mode = 3, .std = 7,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1f */
-};
-
-static struct tda18271_std_map tda18271c2_std_map = {
- .fm_radio = { .if_freq = 1250, .fm_rfn = 1, .agc_mode = 3, .std = 0,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x18 */
- .atv_b = { .if_freq = 6000, .fm_rfn = 0, .agc_mode = 1, .std = 5,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0d */
- .atv_dk = { .if_freq = 6900, .fm_rfn = 0, .agc_mode = 1, .std = 6,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */
- .atv_gh = { .if_freq = 7100, .fm_rfn = 0, .agc_mode = 1, .std = 6,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */
- .atv_i = { .if_freq = 7250, .fm_rfn = 0, .agc_mode = 1, .std = 6,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */
- .atv_l = { .if_freq = 6900, .fm_rfn = 0, .agc_mode = 1, .std = 6,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */
- .atv_lc = { .if_freq = 1250, .fm_rfn = 0, .agc_mode = 1, .std = 6,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0e */
- .atv_mn = { .if_freq = 5400, .fm_rfn = 0, .agc_mode = 1, .std = 4,
- .if_lvl = 0, .rfagc_top = 0x2c, }, /* EP3[4:0] 0x0c */
- .atsc_6 = { .if_freq = 3250, .fm_rfn = 0, .agc_mode = 3, .std = 4,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */
- .dvbt_6 = { .if_freq = 3300, .fm_rfn = 0, .agc_mode = 3, .std = 4,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */
- .dvbt_7 = { .if_freq = 3500, .fm_rfn = 0, .agc_mode = 3, .std = 4,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1c */
- .dvbt_8 = { .if_freq = 4000, .fm_rfn = 0, .agc_mode = 3, .std = 5,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1d */
- .qam_6 = { .if_freq = 4000, .fm_rfn = 0, .agc_mode = 3, .std = 5,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1d */
- .qam_7 = { .if_freq = 4500, .fm_rfn = 0, .agc_mode = 3, .std = 6,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1e */
- .qam_8 = { .if_freq = 5000, .fm_rfn = 0, .agc_mode = 3, .std = 7,
- .if_lvl = 1, .rfagc_top = 0x37, }, /* EP3[4:0] 0x1f */
-};
-
-/*---------------------------------------------------------------------*/
-
-static struct tda18271_map_layout tda18271c1_map_layout = {
- .main_pll = tda18271c1_main_pll,
- .cal_pll = tda18271c1_cal_pll,
-
- .rf_cal = tda18271c1_rf_cal,
- .rf_cal_kmco = tda18271c1_km,
-
- .bp_filter = tda18271_bp_filter,
- .rf_band = tda18271_rf_band,
- .gain_taper = tda18271_gain_taper,
- .ir_measure = tda18271_ir_measure,
-};
-
-static struct tda18271_map_layout tda18271c2_map_layout = {
- .main_pll = tda18271c2_main_pll,
- .cal_pll = tda18271c2_cal_pll,
-
- .rf_cal = tda18271c2_rf_cal,
- .rf_cal_kmco = tda18271c2_km,
-
- .rf_cal_dc_over_dt = tda18271_rf_cal_dc_over_dt,
-
- .bp_filter = tda18271_bp_filter,
- .rf_band = tda18271_rf_band,
- .gain_taper = tda18271_gain_taper,
- .ir_measure = tda18271_ir_measure,
-};
-
-int tda18271_assign_map_layout(struct dvb_frontend *fe)
-{
- struct tda18271_priv *priv = fe->tuner_priv;
- int ret = 0;
-
- switch (priv->id) {
- case TDA18271HDC1:
- priv->maps = &tda18271c1_map_layout;
- memcpy(&priv->std, &tda18271c1_std_map,
- sizeof(struct tda18271_std_map));
- break;
- case TDA18271HDC2:
- priv->maps = &tda18271c2_map_layout;
- memcpy(&priv->std, &tda18271c2_std_map,
- sizeof(struct tda18271_std_map));
- break;
- default:
- ret = -EINVAL;
- break;
- }
- memcpy(priv->rf_cal_state, &tda18271_rf_band_template,
- sizeof(tda18271_rf_band_template));
-
- return ret;
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/tda18271-priv.h b/drivers/media/common/tuners/tda18271-priv.h
deleted file mode 100644
index 454c152..0000000
--- a/drivers/media/common/tuners/tda18271-priv.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- tda18271-priv.h - private header for the NXP TDA18271 silicon tuner
-
- Copyright (C) 2007, 2008 Michael Krufky <mkrufky@linuxtv.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TDA18271_PRIV_H__
-#define __TDA18271_PRIV_H__
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include "tuner-i2c.h"
-#include "tda18271.h"
-
-#define R_ID 0x00 /* ID byte */
-#define R_TM 0x01 /* Thermo byte */
-#define R_PL 0x02 /* Power level byte */
-#define R_EP1 0x03 /* Easy Prog byte 1 */
-#define R_EP2 0x04 /* Easy Prog byte 2 */
-#define R_EP3 0x05 /* Easy Prog byte 3 */
-#define R_EP4 0x06 /* Easy Prog byte 4 */
-#define R_EP5 0x07 /* Easy Prog byte 5 */
-#define R_CPD 0x08 /* Cal Post-Divider byte */
-#define R_CD1 0x09 /* Cal Divider byte 1 */
-#define R_CD2 0x0a /* Cal Divider byte 2 */
-#define R_CD3 0x0b /* Cal Divider byte 3 */
-#define R_MPD 0x0c /* Main Post-Divider byte */
-#define R_MD1 0x0d /* Main Divider byte 1 */
-#define R_MD2 0x0e /* Main Divider byte 2 */
-#define R_MD3 0x0f /* Main Divider byte 3 */
-#define R_EB1 0x10 /* Extended byte 1 */
-#define R_EB2 0x11 /* Extended byte 2 */
-#define R_EB3 0x12 /* Extended byte 3 */
-#define R_EB4 0x13 /* Extended byte 4 */
-#define R_EB5 0x14 /* Extended byte 5 */
-#define R_EB6 0x15 /* Extended byte 6 */
-#define R_EB7 0x16 /* Extended byte 7 */
-#define R_EB8 0x17 /* Extended byte 8 */
-#define R_EB9 0x18 /* Extended byte 9 */
-#define R_EB10 0x19 /* Extended byte 10 */
-#define R_EB11 0x1a /* Extended byte 11 */
-#define R_EB12 0x1b /* Extended byte 12 */
-#define R_EB13 0x1c /* Extended byte 13 */
-#define R_EB14 0x1d /* Extended byte 14 */
-#define R_EB15 0x1e /* Extended byte 15 */
-#define R_EB16 0x1f /* Extended byte 16 */
-#define R_EB17 0x20 /* Extended byte 17 */
-#define R_EB18 0x21 /* Extended byte 18 */
-#define R_EB19 0x22 /* Extended byte 19 */
-#define R_EB20 0x23 /* Extended byte 20 */
-#define R_EB21 0x24 /* Extended byte 21 */
-#define R_EB22 0x25 /* Extended byte 22 */
-#define R_EB23 0x26 /* Extended byte 23 */
-
-#define TDA18271_NUM_REGS 39
-
-/*---------------------------------------------------------------------*/
-
-struct tda18271_rf_tracking_filter_cal {
- u32 rfmax;
- u8 rfband;
- u32 rf1_def;
- u32 rf2_def;
- u32 rf3_def;
- u32 rf1;
- u32 rf2;
- u32 rf3;
- s32 rf_a1;
- s32 rf_b1;
- s32 rf_a2;
- s32 rf_b2;
-};
-
-enum tda18271_pll {
- TDA18271_MAIN_PLL,
- TDA18271_CAL_PLL,
-};
-
-struct tda18271_map_layout;
-
-enum tda18271_ver {
- TDA18271HDC1,
- TDA18271HDC2,
-};
-
-struct tda18271_priv {
- unsigned char tda18271_regs[TDA18271_NUM_REGS];
-
- struct list_head hybrid_tuner_instance_list;
- struct tuner_i2c_props i2c_props;
-
- enum tda18271_mode mode;
- enum tda18271_role role;
- enum tda18271_i2c_gate gate;
- enum tda18271_ver id;
- enum tda18271_output_options output_opt;
- enum tda18271_small_i2c small_i2c;
-
- unsigned int config; /* interface to saa713x / tda829x */
- unsigned int cal_initialized:1;
-
- u8 tm_rfcal;
-
- struct tda18271_map_layout *maps;
- struct tda18271_std_map std;
- struct tda18271_rf_tracking_filter_cal rf_cal_state[8];
-
- struct mutex lock;
-
- u16 if_freq;
-
- u32 frequency;
- u32 bandwidth;
-};
-
-/*---------------------------------------------------------------------*/
-
-extern int tda18271_debug;
-
-#define DBG_INFO 1
-#define DBG_MAP 2
-#define DBG_REG 4
-#define DBG_ADV 8
-#define DBG_CAL 16
-
-__attribute__((format(printf, 4, 5)))
-int _tda_printk(struct tda18271_priv *state, const char *level,
- const char *func, const char *fmt, ...);
-
-#define tda_printk(st, lvl, fmt, arg...) \
- _tda_printk(st, lvl, __func__, fmt, ##arg)
-
-#define tda_dprintk(st, lvl, fmt, arg...) \
-do { \
- if (tda18271_debug & lvl) \
- tda_printk(st, KERN_DEBUG, fmt, ##arg); \
-} while (0)
-
-#define tda_info(fmt, arg...) pr_info(fmt, ##arg)
-#define tda_warn(fmt, arg...) tda_printk(priv, KERN_WARNING, fmt, ##arg)
-#define tda_err(fmt, arg...) tda_printk(priv, KERN_ERR, fmt, ##arg)
-#define tda_dbg(fmt, arg...) tda_dprintk(priv, DBG_INFO, fmt, ##arg)
-#define tda_map(fmt, arg...) tda_dprintk(priv, DBG_MAP, fmt, ##arg)
-#define tda_reg(fmt, arg...) tda_dprintk(priv, DBG_REG, fmt, ##arg)
-#define tda_cal(fmt, arg...) tda_dprintk(priv, DBG_CAL, fmt, ##arg)
-
-#define tda_fail(ret) \
-({ \
- int __ret; \
- __ret = (ret < 0); \
- if (__ret) \
- tda_printk(priv, KERN_ERR, \
- "error %d on line %d\n", ret, __LINE__); \
- __ret; \
-})
-
-/*---------------------------------------------------------------------*/
-
-enum tda18271_map_type {
- /* tda18271_pll_map */
- MAIN_PLL,
- CAL_PLL,
- /* tda18271_map */
- RF_CAL,
- RF_CAL_KMCO,
- RF_CAL_DC_OVER_DT,
- BP_FILTER,
- RF_BAND,
- GAIN_TAPER,
- IR_MEASURE,
-};
-
-extern int tda18271_lookup_pll_map(struct dvb_frontend *fe,
- enum tda18271_map_type map_type,
- u32 *freq, u8 *post_div, u8 *div);
-extern int tda18271_lookup_map(struct dvb_frontend *fe,
- enum tda18271_map_type map_type,
- u32 *freq, u8 *val);
-
-extern int tda18271_lookup_thermometer(struct dvb_frontend *fe);
-
-extern int tda18271_lookup_rf_band(struct dvb_frontend *fe,
- u32 *freq, u8 *rf_band);
-
-extern int tda18271_lookup_cid_target(struct dvb_frontend *fe,
- u32 *freq, u8 *cid_target,
- u16 *count_limit);
-
-extern int tda18271_assign_map_layout(struct dvb_frontend *fe);
-
-/*---------------------------------------------------------------------*/
-
-extern int tda18271_read_regs(struct dvb_frontend *fe);
-extern int tda18271_read_extended(struct dvb_frontend *fe);
-extern int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len);
-extern int tda18271_init_regs(struct dvb_frontend *fe);
-
-extern int tda18271_charge_pump_source(struct dvb_frontend *fe,
- enum tda18271_pll pll, int force);
-extern int tda18271_set_standby_mode(struct dvb_frontend *fe,
- int sm, int sm_lt, int sm_xt);
-
-extern int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq);
-extern int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq);
-
-extern int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq);
-extern int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq);
-extern int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq);
-extern int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq);
-extern int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq);
-extern int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq);
-
-#endif /* __TDA18271_PRIV_H__ */
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/common/tuners/tda18271.h
deleted file mode 100644
index 640bae4..0000000
--- a/drivers/media/common/tuners/tda18271.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- tda18271.h - header for the Philips / NXP TDA18271 silicon tuner
-
- Copyright (C) 2007, 2008 Michael Krufky <mkrufky@linuxtv.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TDA18271_H__
-#define __TDA18271_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-struct tda18271_std_map_item {
- u16 if_freq;
-
- /* EP3[4:3] */
- unsigned int agc_mode:2;
- /* EP3[2:0] */
- unsigned int std:3;
- /* EP4[7] */
- unsigned int fm_rfn:1;
- /* EP4[4:2] */
- unsigned int if_lvl:3;
- /* EB22[6:0] */
- unsigned int rfagc_top:7;
-};
-
-struct tda18271_std_map {
- struct tda18271_std_map_item fm_radio;
- struct tda18271_std_map_item atv_b;
- struct tda18271_std_map_item atv_dk;
- struct tda18271_std_map_item atv_gh;
- struct tda18271_std_map_item atv_i;
- struct tda18271_std_map_item atv_l;
- struct tda18271_std_map_item atv_lc;
- struct tda18271_std_map_item atv_mn;
- struct tda18271_std_map_item atsc_6;
- struct tda18271_std_map_item dvbt_6;
- struct tda18271_std_map_item dvbt_7;
- struct tda18271_std_map_item dvbt_8;
- struct tda18271_std_map_item qam_6;
- struct tda18271_std_map_item qam_7;
- struct tda18271_std_map_item qam_8;
-};
-
-enum tda18271_role {
- TDA18271_MASTER = 0,
- TDA18271_SLAVE,
-};
-
-enum tda18271_i2c_gate {
- TDA18271_GATE_AUTO = 0,
- TDA18271_GATE_ANALOG,
- TDA18271_GATE_DIGITAL,
-};
-
-enum tda18271_output_options {
- /* slave tuner output & loop thru & xtal oscillator always on */
- TDA18271_OUTPUT_LT_XT_ON = 0,
-
- /* slave tuner output loop thru off */
- TDA18271_OUTPUT_LT_OFF = 1,
-
- /* xtal oscillator off */
- TDA18271_OUTPUT_XT_OFF = 2,
-};
-
-enum tda18271_small_i2c {
- TDA18271_39_BYTE_CHUNK_INIT = 0,
- TDA18271_16_BYTE_CHUNK_INIT = 16,
- TDA18271_08_BYTE_CHUNK_INIT = 8,
- TDA18271_03_BYTE_CHUNK_INIT = 3,
-};
-
-struct tda18271_config {
- /* override default if freq / std settings (optional) */
- struct tda18271_std_map *std_map;
-
- /* master / slave tuner: master uses main pll, slave uses cal pll */
- enum tda18271_role role;
-
- /* use i2c gate provided by analog or digital demod */
- enum tda18271_i2c_gate gate;
-
- /* output options that can be disabled */
- enum tda18271_output_options output_opt;
-
- /* some i2c providers can't write all 39 registers at once */
- enum tda18271_small_i2c small_i2c;
-
- /* force rf tracking filter calibration on startup */
- unsigned int rf_cal_on_startup:1;
-
- /* interface to saa713x / tda829x */
- unsigned int config;
-};
-
-#define TDA18271_CALLBACK_CMD_AGC_ENABLE 0
-
-enum tda18271_mode {
- TDA18271_ANALOG = 0,
- TDA18271_DIGITAL,
-};
-
-#if defined(CONFIG_MEDIA_TUNER_TDA18271) || (defined(CONFIG_MEDIA_TUNER_TDA18271_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
- struct i2c_adapter *i2c,
- struct tda18271_config *cfg);
-#else
-static inline struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe,
- u8 addr,
- struct i2c_adapter *i2c,
- struct tda18271_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif /* __TDA18271_H__ */
diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c
deleted file mode 100644
index a0d1762..0000000
--- a/drivers/media/common/tuners/tda827x.c
+++ /dev/null
@@ -1,917 +0,0 @@
-/*
- *
- * (c) 2005 Hartmut Hackmann
- * (c) 2007 Michael Krufky
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <asm/types.h>
-#include <linux/dvb/frontend.h>
-#include <linux/videodev2.h>
-
-#include "tda827x.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-#define dprintk(args...) \
- do { \
- if (debug) printk(KERN_DEBUG "tda827x: " args); \
- } while (0)
-
-struct tda827x_priv {
- int i2c_addr;
- struct i2c_adapter *i2c_adap;
- struct tda827x_config *cfg;
-
- unsigned int sgIF;
- unsigned char lpsel;
-
- u32 frequency;
- u32 bandwidth;
-};
-
-static void tda827x_set_std(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- char *mode;
-
- priv->lpsel = 0;
- if (params->std & V4L2_STD_MN) {
- priv->sgIF = 92;
- priv->lpsel = 1;
- mode = "MN";
- } else if (params->std & V4L2_STD_B) {
- priv->sgIF = 108;
- mode = "B";
- } else if (params->std & V4L2_STD_GH) {
- priv->sgIF = 124;
- mode = "GH";
- } else if (params->std & V4L2_STD_PAL_I) {
- priv->sgIF = 124;
- mode = "I";
- } else if (params->std & V4L2_STD_DK) {
- priv->sgIF = 124;
- mode = "DK";
- } else if (params->std & V4L2_STD_SECAM_L) {
- priv->sgIF = 124;
- mode = "L";
- } else if (params->std & V4L2_STD_SECAM_LC) {
- priv->sgIF = 20;
- mode = "LC";
- } else {
- priv->sgIF = 124;
- mode = "xx";
- }
-
- if (params->mode == V4L2_TUNER_RADIO) {
- priv->sgIF = 88; /* if frequency is 5.5 MHz */
- dprintk("setting tda827x to radio FM\n");
- } else
- dprintk("setting tda827x to system %s\n", mode);
-}
-
-
-/* ------------------------------------------------------------------ */
-
-struct tda827x_data {
- u32 lomax;
- u8 spd;
- u8 bs;
- u8 bp;
- u8 cp;
- u8 gc3;
- u8 div1p5;
-};
-
-static const struct tda827x_data tda827x_table[] = {
- { .lomax = 62000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
- { .lomax = 66000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
- { .lomax = 76000000, .spd = 3, .bs = 1, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
- { .lomax = 84000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
- { .lomax = 93000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 98000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 109000000, .spd = 3, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 123000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 133000000, .spd = 2, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 151000000, .spd = 2, .bs = 1, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 154000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 181000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 0, .div1p5 = 0},
- { .lomax = 185000000, .spd = 2, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 217000000, .spd = 2, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 244000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 265000000, .spd = 1, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 302000000, .spd = 1, .bs = 1, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 324000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 370000000, .spd = 1, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 454000000, .spd = 1, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 493000000, .spd = 0, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 530000000, .spd = 0, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 554000000, .spd = 0, .bs = 1, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 604000000, .spd = 0, .bs = 1, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
- { .lomax = 696000000, .spd = 0, .bs = 2, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
- { .lomax = 740000000, .spd = 0, .bs = 2, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
- { .lomax = 820000000, .spd = 0, .bs = 3, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
- { .lomax = 865000000, .spd = 0, .bs = 3, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
- { .lomax = 0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0}
-};
-
-static int tuner_transfer(struct dvb_frontend *fe,
- struct i2c_msg *msg,
- const int size)
-{
- int rc;
- struct tda827x_priv *priv = fe->tuner_priv;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- rc = i2c_transfer(priv->i2c_adap, msg, size);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- if (rc >= 0 && rc != size)
- return -EIO;
-
- return rc;
-}
-
-static int tda827xo_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- struct tda827x_priv *priv = fe->tuner_priv;
- u8 buf[14];
- int rc;
-
- struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
- .buf = buf, .len = sizeof(buf) };
- int i, tuner_freq, if_freq;
- u32 N;
-
- dprintk("%s:\n", __func__);
- if (c->bandwidth_hz == 0) {
- if_freq = 5000000;
- } else if (c->bandwidth_hz <= 6000000) {
- if_freq = 4000000;
- } else if (c->bandwidth_hz <= 7000000) {
- if_freq = 4500000;
- } else { /* 8 MHz */
- if_freq = 5000000;
- }
- tuner_freq = c->frequency;
-
- i = 0;
- while (tda827x_table[i].lomax < tuner_freq) {
- if (tda827x_table[i + 1].lomax == 0)
- break;
- i++;
- }
-
- tuner_freq += if_freq;
-
- N = ((tuner_freq + 125000) / 250000) << (tda827x_table[i].spd + 2);
- buf[0] = 0;
- buf[1] = (N>>8) | 0x40;
- buf[2] = N & 0xff;
- buf[3] = 0;
- buf[4] = 0x52;
- buf[5] = (tda827x_table[i].spd << 6) + (tda827x_table[i].div1p5 << 5) +
- (tda827x_table[i].bs << 3) +
- tda827x_table[i].bp;
- buf[6] = (tda827x_table[i].gc3 << 4) + 0x8f;
- buf[7] = 0xbf;
- buf[8] = 0x2a;
- buf[9] = 0x05;
- buf[10] = 0xff;
- buf[11] = 0x00;
- buf[12] = 0x00;
- buf[13] = 0x40;
-
- msg.len = 14;
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- msleep(500);
- /* correct CP value */
- buf[0] = 0x30;
- buf[1] = 0x50 + tda827x_table[i].cp;
- msg.len = 2;
-
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- priv->frequency = c->frequency;
- priv->bandwidth = c->bandwidth_hz;
-
- return 0;
-
-err:
- printk(KERN_ERR "%s: could not write to tuner at addr: 0x%02x\n",
- __func__, priv->i2c_addr << 1);
- return rc;
-}
-
-static int tda827xo_sleep(struct dvb_frontend *fe)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- static u8 buf[] = { 0x30, 0xd0 };
- struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
- .buf = buf, .len = sizeof(buf) };
-
- dprintk("%s:\n", __func__);
- tuner_transfer(fe, &msg, 1);
-
- if (priv->cfg && priv->cfg->sleep)
- priv->cfg->sleep(fe);
-
- return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-static int tda827xo_set_analog_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- unsigned char tuner_reg[8];
- unsigned char reg2[2];
- u32 N;
- int i;
- struct tda827x_priv *priv = fe->tuner_priv;
- struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0 };
- unsigned int freq = params->frequency;
-
- tda827x_set_std(fe, params);
-
- if (params->mode == V4L2_TUNER_RADIO)
- freq = freq / 1000;
-
- N = freq + priv->sgIF;
-
- i = 0;
- while (tda827x_table[i].lomax < N * 62500) {
- if (tda827x_table[i + 1].lomax == 0)
- break;
- i++;
- }
-
- N = N << tda827x_table[i].spd;
-
- tuner_reg[0] = 0;
- tuner_reg[1] = (unsigned char)(N>>8);
- tuner_reg[2] = (unsigned char) N;
- tuner_reg[3] = 0x40;
- tuner_reg[4] = 0x52 + (priv->lpsel << 5);
- tuner_reg[5] = (tda827x_table[i].spd << 6) +
- (tda827x_table[i].div1p5 << 5) +
- (tda827x_table[i].bs << 3) + tda827x_table[i].bp;
- tuner_reg[6] = 0x8f + (tda827x_table[i].gc3 << 4);
- tuner_reg[7] = 0x8f;
-
- msg.buf = tuner_reg;
- msg.len = 8;
- tuner_transfer(fe, &msg, 1);
-
- msg.buf = reg2;
- msg.len = 2;
- reg2[0] = 0x80;
- reg2[1] = 0;
- tuner_transfer(fe, &msg, 1);
-
- reg2[0] = 0x60;
- reg2[1] = 0xbf;
- tuner_transfer(fe, &msg, 1);
-
- reg2[0] = 0x30;
- reg2[1] = tuner_reg[4] + 0x80;
- tuner_transfer(fe, &msg, 1);
-
- msleep(1);
- reg2[0] = 0x30;
- reg2[1] = tuner_reg[4] + 4;
- tuner_transfer(fe, &msg, 1);
-
- msleep(1);
- reg2[0] = 0x30;
- reg2[1] = tuner_reg[4];
- tuner_transfer(fe, &msg, 1);
-
- msleep(550);
- reg2[0] = 0x30;
- reg2[1] = (tuner_reg[4] & 0xfc) + tda827x_table[i].cp;
- tuner_transfer(fe, &msg, 1);
-
- reg2[0] = 0x60;
- reg2[1] = 0x3f;
- tuner_transfer(fe, &msg, 1);
-
- reg2[0] = 0x80;
- reg2[1] = 0x08; /* Vsync en */
- tuner_transfer(fe, &msg, 1);
-
- priv->frequency = params->frequency;
-
- return 0;
-}
-
-static void tda827xo_agcf(struct dvb_frontend *fe)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- unsigned char data[] = { 0x80, 0x0c };
- struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
- .buf = data, .len = 2};
-
- tuner_transfer(fe, &msg, 1);
-}
-
-/* ------------------------------------------------------------------ */
-
-struct tda827xa_data {
- u32 lomax;
- u8 svco;
- u8 spd;
- u8 scr;
- u8 sbs;
- u8 gc3;
-};
-
-static struct tda827xa_data tda827xa_dvbt[] = {
- { .lomax = 56875000, .svco = 3, .spd = 4, .scr = 0, .sbs = 0, .gc3 = 1},
- { .lomax = 67250000, .svco = 0, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
- { .lomax = 81250000, .svco = 1, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
- { .lomax = 97500000, .svco = 2, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
- { .lomax = 113750000, .svco = 3, .spd = 3, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 134500000, .svco = 0, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 154000000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 162500000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 183000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 195000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 227500000, .svco = 3, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 269000000, .svco = 0, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 290000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 325000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 390000000, .svco = 2, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 455000000, .svco = 3, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 520000000, .svco = 0, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 538000000, .svco = 0, .spd = 0, .scr = 1, .sbs = 3, .gc3 = 1},
- { .lomax = 550000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 620000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 650000000, .svco = 1, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 700000000, .svco = 2, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 780000000, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 820000000, .svco = 3, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 870000000, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 911000000, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 0},
- { .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}
-};
-
-static struct tda827xa_data tda827xa_dvbc[] = {
- { .lomax = 50125000, .svco = 2, .spd = 4, .scr = 2, .sbs = 0, .gc3 = 3},
- { .lomax = 58500000, .svco = 3, .spd = 4, .scr = 2, .sbs = 0, .gc3 = 3},
- { .lomax = 69250000, .svco = 0, .spd = 3, .scr = 2, .sbs = 0, .gc3 = 3},
- { .lomax = 83625000, .svco = 1, .spd = 3, .scr = 2, .sbs = 0, .gc3 = 3},
- { .lomax = 97500000, .svco = 2, .spd = 3, .scr = 2, .sbs = 0, .gc3 = 3},
- { .lomax = 100250000, .svco = 2, .spd = 3, .scr = 2, .sbs = 1, .gc3 = 1},
- { .lomax = 117000000, .svco = 3, .spd = 3, .scr = 2, .sbs = 1, .gc3 = 1},
- { .lomax = 138500000, .svco = 0, .spd = 2, .scr = 2, .sbs = 1, .gc3 = 1},
- { .lomax = 167250000, .svco = 1, .spd = 2, .scr = 2, .sbs = 1, .gc3 = 1},
- { .lomax = 187000000, .svco = 2, .spd = 2, .scr = 2, .sbs = 1, .gc3 = 1},
- { .lomax = 200500000, .svco = 2, .spd = 2, .scr = 2, .sbs = 2, .gc3 = 1},
- { .lomax = 234000000, .svco = 3, .spd = 2, .scr = 2, .sbs = 2, .gc3 = 3},
- { .lomax = 277000000, .svco = 0, .spd = 1, .scr = 2, .sbs = 2, .gc3 = 3},
- { .lomax = 325000000, .svco = 1, .spd = 1, .scr = 2, .sbs = 2, .gc3 = 1},
- { .lomax = 334500000, .svco = 1, .spd = 1, .scr = 2, .sbs = 3, .gc3 = 3},
- { .lomax = 401000000, .svco = 2, .spd = 1, .scr = 2, .sbs = 3, .gc3 = 3},
- { .lomax = 468000000, .svco = 3, .spd = 1, .scr = 2, .sbs = 3, .gc3 = 1},
- { .lomax = 535000000, .svco = 0, .spd = 0, .scr = 1, .sbs = 3, .gc3 = 1},
- { .lomax = 554000000, .svco = 0, .spd = 0, .scr = 2, .sbs = 3, .gc3 = 1},
- { .lomax = 638000000, .svco = 1, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 1},
- { .lomax = 669000000, .svco = 1, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 1},
- { .lomax = 720000000, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 1},
- { .lomax = 802000000, .svco = 2, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 1},
- { .lomax = 835000000, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 1},
- { .lomax = 885000000, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 1},
- { .lomax = 911000000, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 1},
- { .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}
-};
-
-static struct tda827xa_data tda827xa_analog[] = {
- { .lomax = 56875000, .svco = 3, .spd = 4, .scr = 0, .sbs = 0, .gc3 = 3},
- { .lomax = 67250000, .svco = 0, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 3},
- { .lomax = 81250000, .svco = 1, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 3},
- { .lomax = 97500000, .svco = 2, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 3},
- { .lomax = 113750000, .svco = 3, .spd = 3, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 134500000, .svco = 0, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 154000000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 162500000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 183000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 195000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 227500000, .svco = 3, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 3},
- { .lomax = 269000000, .svco = 0, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 3},
- { .lomax = 325000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 390000000, .svco = 2, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 3},
- { .lomax = 455000000, .svco = 3, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 3},
- { .lomax = 520000000, .svco = 0, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 538000000, .svco = 0, .spd = 0, .scr = 1, .sbs = 3, .gc3 = 1},
- { .lomax = 554000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 620000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 650000000, .svco = 1, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 700000000, .svco = 2, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 780000000, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 820000000, .svco = 3, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 870000000, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 911000000, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 0},
- { .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}
-};
-
-static int tda827xa_sleep(struct dvb_frontend *fe)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- static u8 buf[] = { 0x30, 0x90 };
- struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
- .buf = buf, .len = sizeof(buf) };
-
- dprintk("%s:\n", __func__);
-
- tuner_transfer(fe, &msg, 1);
-
- if (priv->cfg && priv->cfg->sleep)
- priv->cfg->sleep(fe);
-
- return 0;
-}
-
-static void tda827xa_lna_gain(struct dvb_frontend *fe, int high,
- struct analog_parameters *params)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- unsigned char buf[] = {0x22, 0x01};
- int arg;
- int gp_func;
- struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) };
-
- if (NULL == priv->cfg) {
- dprintk("tda827x_config not defined, cannot set LNA gain!\n");
- return;
- }
- msg.addr = priv->cfg->switch_addr;
- if (priv->cfg->config) {
- if (high)
- dprintk("setting LNA to high gain\n");
- else
- dprintk("setting LNA to low gain\n");
- }
- switch (priv->cfg->config) {
- case 0: /* no LNA */
- break;
- case 1: /* switch is GPIO 0 of tda8290 */
- case 2:
- if (params == NULL) {
- gp_func = 0;
- arg = 0;
- } else {
- /* turn Vsync on */
- gp_func = 1;
- if (params->std & V4L2_STD_MN)
- arg = 1;
- else
- arg = 0;
- }
- if (fe->callback)
- fe->callback(priv->i2c_adap->algo_data,
- DVB_FRONTEND_COMPONENT_TUNER,
- gp_func, arg);
- buf[1] = high ? 0 : 1;
- if (priv->cfg->config == 2)
- buf[1] = high ? 1 : 0;
- tuner_transfer(fe, &msg, 1);
- break;
- case 3: /* switch with GPIO of saa713x */
- if (fe->callback)
- fe->callback(priv->i2c_adap->algo_data,
- DVB_FRONTEND_COMPONENT_TUNER, 0, high);
- break;
- }
-}
-
-static int tda827xa_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- struct tda827x_priv *priv = fe->tuner_priv;
- struct tda827xa_data *frequency_map = tda827xa_dvbt;
- u8 buf[11];
-
- struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
- .buf = buf, .len = sizeof(buf) };
-
- int i, tuner_freq, if_freq, rc;
- u32 N;
-
- dprintk("%s:\n", __func__);
-
- tda827xa_lna_gain(fe, 1, NULL);
- msleep(20);
-
- if (c->bandwidth_hz == 0) {
- if_freq = 5000000;
- } else if (c->bandwidth_hz <= 6000000) {
- if_freq = 4000000;
- } else if (c->bandwidth_hz <= 7000000) {
- if_freq = 4500000;
- } else { /* 8 MHz */
- if_freq = 5000000;
- }
- tuner_freq = c->frequency;
-
- switch (c->delivery_system) {
- case SYS_DVBC_ANNEX_A:
- case SYS_DVBC_ANNEX_C:
- dprintk("%s select tda827xa_dvbc\n", __func__);
- frequency_map = tda827xa_dvbc;
- break;
- default:
- break;
- }
-
- i = 0;
- while (frequency_map[i].lomax < tuner_freq) {
- if (frequency_map[i + 1].lomax == 0)
- break;
- i++;
- }
-
- tuner_freq += if_freq;
-
- N = ((tuner_freq + 31250) / 62500) << frequency_map[i].spd;
- buf[0] = 0; // subaddress
- buf[1] = N >> 8;
- buf[2] = N & 0xff;
- buf[3] = 0;
- buf[4] = 0x16;
- buf[5] = (frequency_map[i].spd << 5) + (frequency_map[i].svco << 3) +
- frequency_map[i].sbs;
- buf[6] = 0x4b + (frequency_map[i].gc3 << 4);
- buf[7] = 0x1c;
- buf[8] = 0x06;
- buf[9] = 0x24;
- buf[10] = 0x00;
- msg.len = 11;
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- buf[0] = 0x90;
- buf[1] = 0xff;
- buf[2] = 0x60;
- buf[3] = 0x00;
- buf[4] = 0x59; // lpsel, for 6MHz + 2
- msg.len = 5;
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- buf[0] = 0xa0;
- buf[1] = 0x40;
- msg.len = 2;
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- msleep(11);
- msg.flags = I2C_M_RD;
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
- msg.flags = 0;
-
- buf[1] >>= 4;
- dprintk("tda8275a AGC2 gain is: %d\n", buf[1]);
- if ((buf[1]) < 2) {
- tda827xa_lna_gain(fe, 0, NULL);
- buf[0] = 0x60;
- buf[1] = 0x0c;
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
- }
-
- buf[0] = 0xc0;
- buf[1] = 0x99; // lpsel, for 6MHz + 2
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- buf[0] = 0x60;
- buf[1] = 0x3c;
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- /* correct CP value */
- buf[0] = 0x30;
- buf[1] = 0x10 + frequency_map[i].scr;
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- msleep(163);
- buf[0] = 0xc0;
- buf[1] = 0x39; // lpsel, for 6MHz + 2
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- msleep(3);
- /* freeze AGC1 */
- buf[0] = 0x50;
- buf[1] = 0x4f + (frequency_map[i].gc3 << 4);
- rc = tuner_transfer(fe, &msg, 1);
- if (rc < 0)
- goto err;
-
- priv->frequency = c->frequency;
- priv->bandwidth = c->bandwidth_hz;
-
- return 0;
-
-err:
- printk(KERN_ERR "%s: could not write to tuner at addr: 0x%02x\n",
- __func__, priv->i2c_addr << 1);
- return rc;
-}
-
-
-static int tda827xa_set_analog_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- unsigned char tuner_reg[11];
- u32 N;
- int i;
- struct tda827x_priv *priv = fe->tuner_priv;
- struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
- .buf = tuner_reg, .len = sizeof(tuner_reg) };
- unsigned int freq = params->frequency;
-
- tda827x_set_std(fe, params);
-
- tda827xa_lna_gain(fe, 1, params);
- msleep(10);
-
- if (params->mode == V4L2_TUNER_RADIO)
- freq = freq / 1000;
-
- N = freq + priv->sgIF;
-
- i = 0;
- while (tda827xa_analog[i].lomax < N * 62500) {
- if (tda827xa_analog[i + 1].lomax == 0)
- break;
- i++;
- }
-
- N = N << tda827xa_analog[i].spd;
-
- tuner_reg[0] = 0;
- tuner_reg[1] = (unsigned char)(N>>8);
- tuner_reg[2] = (unsigned char) N;
- tuner_reg[3] = 0;
- tuner_reg[4] = 0x16;
- tuner_reg[5] = (tda827xa_analog[i].spd << 5) +
- (tda827xa_analog[i].svco << 3) +
- tda827xa_analog[i].sbs;
- tuner_reg[6] = 0x8b + (tda827xa_analog[i].gc3 << 4);
- tuner_reg[7] = 0x1c;
- tuner_reg[8] = 4;
- tuner_reg[9] = 0x20;
- tuner_reg[10] = 0x00;
- msg.len = 11;
- tuner_transfer(fe, &msg, 1);
-
- tuner_reg[0] = 0x90;
- tuner_reg[1] = 0xff;
- tuner_reg[2] = 0xe0;
- tuner_reg[3] = 0;
- tuner_reg[4] = 0x99 + (priv->lpsel << 1);
- msg.len = 5;
- tuner_transfer(fe, &msg, 1);
-
- tuner_reg[0] = 0xa0;
- tuner_reg[1] = 0xc0;
- msg.len = 2;
- tuner_transfer(fe, &msg, 1);
-
- tuner_reg[0] = 0x30;
- tuner_reg[1] = 0x10 + tda827xa_analog[i].scr;
- tuner_transfer(fe, &msg, 1);
-
- msg.flags = I2C_M_RD;
- tuner_transfer(fe, &msg, 1);
- msg.flags = 0;
- tuner_reg[1] >>= 4;
- dprintk("AGC2 gain is: %d\n", tuner_reg[1]);
- if (tuner_reg[1] < 1)
- tda827xa_lna_gain(fe, 0, params);
-
- msleep(100);
- tuner_reg[0] = 0x60;
- tuner_reg[1] = 0x3c;
- tuner_transfer(fe, &msg, 1);
-
- msleep(163);
- tuner_reg[0] = 0x50;
- tuner_reg[1] = 0x8f + (tda827xa_analog[i].gc3 << 4);
- tuner_transfer(fe, &msg, 1);
-
- tuner_reg[0] = 0x80;
- tuner_reg[1] = 0x28;
- tuner_transfer(fe, &msg, 1);
-
- tuner_reg[0] = 0xb0;
- tuner_reg[1] = 0x01;
- tuner_transfer(fe, &msg, 1);
-
- tuner_reg[0] = 0xc0;
- tuner_reg[1] = 0x19 + (priv->lpsel << 1);
- tuner_transfer(fe, &msg, 1);
-
- priv->frequency = params->frequency;
-
- return 0;
-}
-
-static void tda827xa_agcf(struct dvb_frontend *fe)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- unsigned char data[] = {0x80, 0x2c};
- struct i2c_msg msg = {.addr = priv->i2c_addr, .flags = 0,
- .buf = data, .len = 2};
- tuner_transfer(fe, &msg, 1);
-}
-
-/* ------------------------------------------------------------------ */
-
-static int tda827x_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
- return 0;
-}
-
-static int tda827x_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static int tda827x_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- *bandwidth = priv->bandwidth;
- return 0;
-}
-
-static int tda827x_init(struct dvb_frontend *fe)
-{
- struct tda827x_priv *priv = fe->tuner_priv;
- dprintk("%s:\n", __func__);
- if (priv->cfg && priv->cfg->init)
- priv->cfg->init(fe);
-
- return 0;
-}
-
-static int tda827x_probe_version(struct dvb_frontend *fe);
-
-static int tda827x_initial_init(struct dvb_frontend *fe)
-{
- int ret;
- ret = tda827x_probe_version(fe);
- if (ret)
- return ret;
- return fe->ops.tuner_ops.init(fe);
-}
-
-static int tda827x_initial_sleep(struct dvb_frontend *fe)
-{
- int ret;
- ret = tda827x_probe_version(fe);
- if (ret)
- return ret;
- return fe->ops.tuner_ops.sleep(fe);
-}
-
-static struct dvb_tuner_ops tda827xo_tuner_ops = {
- .info = {
- .name = "Philips TDA827X",
- .frequency_min = 55000000,
- .frequency_max = 860000000,
- .frequency_step = 250000
- },
- .release = tda827x_release,
- .init = tda827x_initial_init,
- .sleep = tda827x_initial_sleep,
- .set_params = tda827xo_set_params,
- .set_analog_params = tda827xo_set_analog_params,
- .get_frequency = tda827x_get_frequency,
- .get_bandwidth = tda827x_get_bandwidth,
-};
-
-static struct dvb_tuner_ops tda827xa_tuner_ops = {
- .info = {
- .name = "Philips TDA827XA",
- .frequency_min = 44000000,
- .frequency_max = 906000000,
- .frequency_step = 62500
- },
- .release = tda827x_release,
- .init = tda827x_init,
- .sleep = tda827xa_sleep,
- .set_params = tda827xa_set_params,
- .set_analog_params = tda827xa_set_analog_params,
- .get_frequency = tda827x_get_frequency,
- .get_bandwidth = tda827x_get_bandwidth,
-};
-
-static int tda827x_probe_version(struct dvb_frontend *fe)
-{
- u8 data;
- int rc;
- struct tda827x_priv *priv = fe->tuner_priv;
- struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = I2C_M_RD,
- .buf = &data, .len = 1 };
-
- rc = tuner_transfer(fe, &msg, 1);
-
- if (rc < 0) {
- printk("%s: could not read from tuner at addr: 0x%02x\n",
- __func__, msg.addr << 1);
- return rc;
- }
- if ((data & 0x3c) == 0) {
- dprintk("tda827x tuner found\n");
- fe->ops.tuner_ops.init = tda827x_init;
- fe->ops.tuner_ops.sleep = tda827xo_sleep;
- if (priv->cfg)
- priv->cfg->agcf = tda827xo_agcf;
- } else {
- dprintk("tda827xa tuner found\n");
- memcpy(&fe->ops.tuner_ops, &tda827xa_tuner_ops, sizeof(struct dvb_tuner_ops));
- if (priv->cfg)
- priv->cfg->agcf = tda827xa_agcf;
- }
- return 0;
-}
-
-struct dvb_frontend *tda827x_attach(struct dvb_frontend *fe, int addr,
- struct i2c_adapter *i2c,
- struct tda827x_config *cfg)
-{
- struct tda827x_priv *priv = NULL;
-
- dprintk("%s:\n", __func__);
- priv = kzalloc(sizeof(struct tda827x_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->i2c_addr = addr;
- priv->i2c_adap = i2c;
- priv->cfg = cfg;
- memcpy(&fe->ops.tuner_ops, &tda827xo_tuner_ops, sizeof(struct dvb_tuner_ops));
- fe->tuner_priv = priv;
-
- dprintk("type set to %s\n", fe->ops.tuner_ops.info.name);
-
- return fe;
-}
-EXPORT_SYMBOL_GPL(tda827x_attach);
-
-MODULE_DESCRIPTION("DVB TDA827x driver");
-MODULE_AUTHOR("Hartmut Hackmann <hartmut.hackmann@t-online.de>");
-MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
-MODULE_LICENSE("GPL");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/tda827x.h b/drivers/media/common/tuners/tda827x.h
deleted file mode 100644
index 7d72ce0..0000000
--- a/drivers/media/common/tuners/tda827x.h
+++ /dev/null
@@ -1,68 +0,0 @@
- /*
- DVB Driver for Philips tda827x / tda827xa Silicon tuners
-
- (c) 2005 Hartmut Hackmann
- (c) 2007 Michael Krufky
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef __DVB_TDA827X_H__
-#define __DVB_TDA827X_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-struct tda827x_config
-{
- /* saa7134 - provided callbacks */
- int (*init) (struct dvb_frontend *fe);
- int (*sleep) (struct dvb_frontend *fe);
-
- /* interface to tda829x driver */
- unsigned int config;
- int switch_addr;
-
- void (*agcf)(struct dvb_frontend *fe);
-};
-
-
-/**
- * Attach a tda827x tuner to the supplied frontend structure.
- *
- * @param fe Frontend to attach to.
- * @param addr i2c address of the tuner.
- * @param i2c i2c adapter to use.
- * @param cfg optional callback function pointers.
- * @return FE pointer on success, NULL on failure.
- */
-#if defined(CONFIG_MEDIA_TUNER_TDA827X) || (defined(CONFIG_MEDIA_TUNER_TDA827X_MODULE) && defined(MODULE))
-extern struct dvb_frontend* tda827x_attach(struct dvb_frontend *fe, int addr,
- struct i2c_adapter *i2c,
- struct tda827x_config *cfg);
-#else
-static inline struct dvb_frontend* tda827x_attach(struct dvb_frontend *fe,
- int addr,
- struct i2c_adapter *i2c,
- struct tda827x_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif // CONFIG_MEDIA_TUNER_TDA827X
-
-#endif // __DVB_TDA827X_H__
diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c
deleted file mode 100644
index 8c48521..0000000
--- a/drivers/media/common/tuners/tda8290.c
+++ /dev/null
@@ -1,874 +0,0 @@
-/*
-
- i2c tv tuner chip device driver
- controls the philips tda8290+75 tuner chip combo.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- This "tda8290" module was split apart from the original "tuner" module.
-*/
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include "tuner-i2c.h"
-#include "tda8290.h"
-#include "tda827x.h"
-#include "tda18271.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-static int deemphasis_50;
-module_param(deemphasis_50, int, 0644);
-MODULE_PARM_DESC(deemphasis_50, "0 - 75us deemphasis; 1 - 50us deemphasis");
-
-/* ---------------------------------------------------------------------- */
-
-struct tda8290_priv {
- struct tuner_i2c_props i2c_props;
-
- unsigned char tda8290_easy_mode;
-
- unsigned char tda827x_addr;
-
- unsigned char ver;
-#define TDA8290 1
-#define TDA8295 2
-#define TDA8275 4
-#define TDA8275A 8
-#define TDA18271 16
-
- struct tda827x_config cfg;
-};
-
-/*---------------------------------------------------------------------*/
-
-static int tda8290_i2c_bridge(struct dvb_frontend *fe, int close)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- unsigned char enable[2] = { 0x21, 0xC0 };
- unsigned char disable[2] = { 0x21, 0x00 };
- unsigned char *msg;
-
- if (close) {
- msg = enable;
- tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
- /* let the bridge stabilize */
- msleep(20);
- } else {
- msg = disable;
- tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
- }
-
- return 0;
-}
-
-static int tda8295_i2c_bridge(struct dvb_frontend *fe, int close)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- unsigned char enable[2] = { 0x45, 0xc1 };
- unsigned char disable[2] = { 0x46, 0x00 };
- unsigned char buf[3] = { 0x45, 0x01, 0x00 };
- unsigned char *msg;
-
- if (close) {
- msg = enable;
- tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
- /* let the bridge stabilize */
- msleep(20);
- } else {
- msg = disable;
- tuner_i2c_xfer_send_recv(&priv->i2c_props, msg, 1, &msg[1], 1);
-
- buf[2] = msg[1];
- buf[2] &= ~0x04;
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 3);
- msleep(5);
-
- msg[1] |= 0x04;
- tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
- }
-
- return 0;
-}
-
-/*---------------------------------------------------------------------*/
-
-static void set_audio(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
- char* mode;
-
- if (params->std & V4L2_STD_MN) {
- priv->tda8290_easy_mode = 0x01;
- mode = "MN";
- } else if (params->std & V4L2_STD_B) {
- priv->tda8290_easy_mode = 0x02;
- mode = "B";
- } else if (params->std & V4L2_STD_GH) {
- priv->tda8290_easy_mode = 0x04;
- mode = "GH";
- } else if (params->std & V4L2_STD_PAL_I) {
- priv->tda8290_easy_mode = 0x08;
- mode = "I";
- } else if (params->std & V4L2_STD_DK) {
- priv->tda8290_easy_mode = 0x10;
- mode = "DK";
- } else if (params->std & V4L2_STD_SECAM_L) {
- priv->tda8290_easy_mode = 0x20;
- mode = "L";
- } else if (params->std & V4L2_STD_SECAM_LC) {
- priv->tda8290_easy_mode = 0x40;
- mode = "LC";
- } else {
- priv->tda8290_easy_mode = 0x10;
- mode = "xx";
- }
-
- if (params->mode == V4L2_TUNER_RADIO) {
- /* Set TDA8295 to FM radio; Start TDA8290 with MN values */
- priv->tda8290_easy_mode = (priv->ver & TDA8295) ? 0x80 : 0x01;
- tuner_dbg("setting to radio FM\n");
- } else {
- tuner_dbg("setting tda829x to system %s\n", mode);
- }
-}
-
-static struct {
- unsigned char seq[2];
-} fm_mode[] = {
- { { 0x01, 0x81} }, /* Put device into expert mode */
- { { 0x03, 0x48} }, /* Disable NOTCH and VIDEO filters */
- { { 0x04, 0x04} }, /* Disable color carrier filter (SSIF) */
- { { 0x05, 0x04} }, /* ADC headroom */
- { { 0x06, 0x10} }, /* group delay flat */
-
- { { 0x07, 0x00} }, /* use the same radio DTO values as a tda8295 */
- { { 0x08, 0x00} },
- { { 0x09, 0x80} },
- { { 0x0a, 0xda} },
- { { 0x0b, 0x4b} },
- { { 0x0c, 0x68} },
-
- { { 0x0d, 0x00} }, /* PLL off, no video carrier detect */
- { { 0x14, 0x00} }, /* disable auto mute if no video */
-};
-
-static void tda8290_set_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- unsigned char soft_reset[] = { 0x00, 0x00 };
- unsigned char easy_mode[] = { 0x01, priv->tda8290_easy_mode };
- unsigned char expert_mode[] = { 0x01, 0x80 };
- unsigned char agc_out_on[] = { 0x02, 0x00 };
- unsigned char gainset_off[] = { 0x28, 0x14 };
- unsigned char if_agc_spd[] = { 0x0f, 0x88 };
- unsigned char adc_head_6[] = { 0x05, 0x04 };
- unsigned char adc_head_9[] = { 0x05, 0x02 };
- unsigned char adc_head_12[] = { 0x05, 0x01 };
- unsigned char pll_bw_nom[] = { 0x0d, 0x47 };
- unsigned char pll_bw_low[] = { 0x0d, 0x27 };
- unsigned char gainset_2[] = { 0x28, 0x64 };
- unsigned char agc_rst_on[] = { 0x0e, 0x0b };
- unsigned char agc_rst_off[] = { 0x0e, 0x09 };
- unsigned char if_agc_set[] = { 0x0f, 0x81 };
- unsigned char addr_adc_sat = 0x1a;
- unsigned char addr_agc_stat = 0x1d;
- unsigned char addr_pll_stat = 0x1b;
- unsigned char adc_sat, agc_stat,
- pll_stat;
- int i;
-
- set_audio(fe, params);
-
- if (priv->cfg.config)
- tuner_dbg("tda827xa config is 0x%02x\n", priv->cfg.config);
- tuner_i2c_xfer_send(&priv->i2c_props, easy_mode, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, agc_out_on, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, soft_reset, 2);
- msleep(1);
-
- if (params->mode == V4L2_TUNER_RADIO) {
- unsigned char deemphasis[] = { 0x13, 1 };
-
- /* FIXME: allow using a different deemphasis */
-
- if (deemphasis_50)
- deemphasis[1] = 2;
-
- for (i = 0; i < ARRAY_SIZE(fm_mode); i++)
- tuner_i2c_xfer_send(&priv->i2c_props, fm_mode[i].seq, 2);
-
- tuner_i2c_xfer_send(&priv->i2c_props, deemphasis, 2);
- } else {
- expert_mode[1] = priv->tda8290_easy_mode + 0x80;
- tuner_i2c_xfer_send(&priv->i2c_props, expert_mode, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, gainset_off, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, if_agc_spd, 2);
- if (priv->tda8290_easy_mode & 0x60)
- tuner_i2c_xfer_send(&priv->i2c_props, adc_head_9, 2);
- else
- tuner_i2c_xfer_send(&priv->i2c_props, adc_head_6, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_nom, 2);
- }
-
-
- tda8290_i2c_bridge(fe, 1);
-
- if (fe->ops.tuner_ops.set_analog_params)
- fe->ops.tuner_ops.set_analog_params(fe, params);
-
- for (i = 0; i < 3; i++) {
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_pll_stat, 1, &pll_stat, 1);
- if (pll_stat & 0x80) {
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_adc_sat, 1,
- &adc_sat, 1);
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_agc_stat, 1,
- &agc_stat, 1);
- tuner_dbg("tda8290 is locked, AGC: %d\n", agc_stat);
- break;
- } else {
- tuner_dbg("tda8290 not locked, no signal?\n");
- msleep(100);
- }
- }
- /* adjust headroom resp. gain */
- if ((agc_stat > 115) || (!(pll_stat & 0x80) && (adc_sat < 20))) {
- tuner_dbg("adjust gain, step 1. Agc: %d, ADC stat: %d, lock: %d\n",
- agc_stat, adc_sat, pll_stat & 0x80);
- tuner_i2c_xfer_send(&priv->i2c_props, gainset_2, 2);
- msleep(100);
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_agc_stat, 1, &agc_stat, 1);
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_pll_stat, 1, &pll_stat, 1);
- if ((agc_stat > 115) || !(pll_stat & 0x80)) {
- tuner_dbg("adjust gain, step 2. Agc: %d, lock: %d\n",
- agc_stat, pll_stat & 0x80);
- if (priv->cfg.agcf)
- priv->cfg.agcf(fe);
- msleep(100);
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_agc_stat, 1,
- &agc_stat, 1);
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_pll_stat, 1,
- &pll_stat, 1);
- if((agc_stat > 115) || !(pll_stat & 0x80)) {
- tuner_dbg("adjust gain, step 3. Agc: %d\n", agc_stat);
- tuner_i2c_xfer_send(&priv->i2c_props, adc_head_12, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_low, 2);
- msleep(100);
- }
- }
- }
-
- /* l/ l' deadlock? */
- if(priv->tda8290_easy_mode & 0x60) {
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_adc_sat, 1,
- &adc_sat, 1);
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &addr_pll_stat, 1,
- &pll_stat, 1);
- if ((adc_sat > 20) || !(pll_stat & 0x80)) {
- tuner_dbg("trying to resolve SECAM L deadlock\n");
- tuner_i2c_xfer_send(&priv->i2c_props, agc_rst_on, 2);
- msleep(40);
- tuner_i2c_xfer_send(&priv->i2c_props, agc_rst_off, 2);
- }
- }
-
- tda8290_i2c_bridge(fe, 0);
- tuner_i2c_xfer_send(&priv->i2c_props, if_agc_set, 2);
-}
-
-/*---------------------------------------------------------------------*/
-
-static void tda8295_power(struct dvb_frontend *fe, int enable)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
- unsigned char buf[] = { 0x30, 0x00 }; /* clb_stdbt */
-
- tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1);
-
- if (enable)
- buf[1] = 0x01;
- else
- buf[1] = 0x03;
-
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
-}
-
-static void tda8295_set_easy_mode(struct dvb_frontend *fe, int enable)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
- unsigned char buf[] = { 0x01, 0x00 };
-
- tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1);
-
- if (enable)
- buf[1] = 0x01; /* rising edge sets regs 0x02 - 0x23 */
- else
- buf[1] = 0x00; /* reset active bit */
-
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
-}
-
-static void tda8295_set_video_std(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
- unsigned char buf[] = { 0x00, priv->tda8290_easy_mode };
-
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
-
- tda8295_set_easy_mode(fe, 1);
- msleep(20);
- tda8295_set_easy_mode(fe, 0);
-}
-
-/*---------------------------------------------------------------------*/
-
-static void tda8295_agc1_out(struct dvb_frontend *fe, int enable)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
- unsigned char buf[] = { 0x02, 0x00 }; /* DIV_FUNC */
-
- tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1);
-
- if (enable)
- buf[1] &= ~0x40;
- else
- buf[1] |= 0x40;
-
- tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
-}
-
-static void tda8295_agc2_out(struct dvb_frontend *fe, int enable)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
- unsigned char set_gpio_cf[] = { 0x44, 0x00 };
- unsigned char set_gpio_val[] = { 0x46, 0x00 };
-
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &set_gpio_cf[0], 1, &set_gpio_cf[1], 1);
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &set_gpio_val[0], 1, &set_gpio_val[1], 1);
-
- set_gpio_cf[1] &= 0xf0; /* clear GPIO_0 bits 3-0 */
-
- if (enable) {
- set_gpio_cf[1] |= 0x01; /* config GPIO_0 as Open Drain Out */
- set_gpio_val[1] &= 0xfe; /* set GPIO_0 pin low */
- }
- tuner_i2c_xfer_send(&priv->i2c_props, set_gpio_cf, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, set_gpio_val, 2);
-}
-
-static int tda8295_has_signal(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- unsigned char hvpll_stat = 0x26;
- unsigned char ret;
-
- tuner_i2c_xfer_send_recv(&priv->i2c_props, &hvpll_stat, 1, &ret, 1);
- return (ret & 0x01) ? 65535 : 0;
-}
-
-/*---------------------------------------------------------------------*/
-
-static void tda8295_set_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- unsigned char blanking_mode[] = { 0x1d, 0x00 };
-
- set_audio(fe, params);
-
- tuner_dbg("%s: freq = %d\n", __func__, params->frequency);
-
- tda8295_power(fe, 1);
- tda8295_agc1_out(fe, 1);
-
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- &blanking_mode[0], 1, &blanking_mode[1], 1);
-
- tda8295_set_video_std(fe);
-
- blanking_mode[1] = 0x03;
- tuner_i2c_xfer_send(&priv->i2c_props, blanking_mode, 2);
- msleep(20);
-
- tda8295_i2c_bridge(fe, 1);
-
- if (fe->ops.tuner_ops.set_analog_params)
- fe->ops.tuner_ops.set_analog_params(fe, params);
-
- if (priv->cfg.agcf)
- priv->cfg.agcf(fe);
-
- if (tda8295_has_signal(fe))
- tuner_dbg("tda8295 is locked\n");
- else
- tuner_dbg("tda8295 not locked, no signal?\n");
-
- tda8295_i2c_bridge(fe, 0);
-}
-
-/*---------------------------------------------------------------------*/
-
-static int tda8290_has_signal(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- unsigned char i2c_get_afc[1] = { 0x1B };
- unsigned char afc = 0;
-
- tuner_i2c_xfer_send_recv(&priv->i2c_props,
- i2c_get_afc, ARRAY_SIZE(i2c_get_afc), &afc, 1);
- return (afc & 0x80)? 65535:0;
-}
-
-/*---------------------------------------------------------------------*/
-
-static void tda8290_standby(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- unsigned char cb1[] = { 0x30, 0xD0 };
- unsigned char tda8290_standby[] = { 0x00, 0x02 };
- unsigned char tda8290_agc_tri[] = { 0x02, 0x20 };
- struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags=0, .buf=cb1, .len = 2};
-
- tda8290_i2c_bridge(fe, 1);
- if (priv->ver & TDA8275A)
- cb1[1] = 0x90;
- i2c_transfer(priv->i2c_props.adap, &msg, 1);
- tda8290_i2c_bridge(fe, 0);
- tuner_i2c_xfer_send(&priv->i2c_props, tda8290_agc_tri, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, tda8290_standby, 2);
-}
-
-static void tda8295_standby(struct dvb_frontend *fe)
-{
- tda8295_agc1_out(fe, 0); /* Put AGC in tri-state */
-
- tda8295_power(fe, 0);
-}
-
-static void tda8290_init_if(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- unsigned char set_VS[] = { 0x30, 0x6F };
- unsigned char set_GP00_CF[] = { 0x20, 0x01 };
- unsigned char set_GP01_CF[] = { 0x20, 0x0B };
-
- if ((priv->cfg.config == 1) || (priv->cfg.config == 2))
- tuner_i2c_xfer_send(&priv->i2c_props, set_GP00_CF, 2);
- else
- tuner_i2c_xfer_send(&priv->i2c_props, set_GP01_CF, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, set_VS, 2);
-}
-
-static void tda8295_init_if(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- static unsigned char set_adc_ctl[] = { 0x33, 0x14 };
- static unsigned char set_adc_ctl2[] = { 0x34, 0x00 };
- static unsigned char set_pll_reg6[] = { 0x3e, 0x63 };
- static unsigned char set_pll_reg0[] = { 0x38, 0x23 };
- static unsigned char set_pll_reg7[] = { 0x3f, 0x01 };
- static unsigned char set_pll_reg10[] = { 0x42, 0x61 };
- static unsigned char set_gpio_reg0[] = { 0x44, 0x0b };
-
- tda8295_power(fe, 1);
-
- tda8295_set_easy_mode(fe, 0);
- tda8295_set_video_std(fe);
-
- tuner_i2c_xfer_send(&priv->i2c_props, set_adc_ctl, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, set_adc_ctl2, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, set_pll_reg6, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, set_pll_reg0, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, set_pll_reg7, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, set_pll_reg10, 2);
- tuner_i2c_xfer_send(&priv->i2c_props, set_gpio_reg0, 2);
-
- tda8295_agc1_out(fe, 0);
- tda8295_agc2_out(fe, 0);
-}
-
-static void tda8290_init_tuner(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
- unsigned char tda8275_init[] = { 0x00, 0x00, 0x00, 0x40, 0xdC, 0x04, 0xAf,
- 0x3F, 0x2A, 0x04, 0xFF, 0x00, 0x00, 0x40 };
- unsigned char tda8275a_init[] = { 0x00, 0x00, 0x00, 0x00, 0xdC, 0x05, 0x8b,
- 0x0c, 0x04, 0x20, 0xFF, 0x00, 0x00, 0x4b };
- struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags=0,
- .buf=tda8275_init, .len = 14};
- if (priv->ver & TDA8275A)
- msg.buf = tda8275a_init;
-
- tda8290_i2c_bridge(fe, 1);
- i2c_transfer(priv->i2c_props.adap, &msg, 1);
- tda8290_i2c_bridge(fe, 0);
-}
-
-/*---------------------------------------------------------------------*/
-
-static void tda829x_release(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
-
- /* only try to release the tuner if we've
- * attached it from within this module */
- if (priv->ver & (TDA18271 | TDA8275 | TDA8275A))
- if (fe->ops.tuner_ops.release)
- fe->ops.tuner_ops.release(fe);
-
- kfree(fe->analog_demod_priv);
- fe->analog_demod_priv = NULL;
-}
-
-static struct tda18271_config tda829x_tda18271_config = {
- .gate = TDA18271_GATE_ANALOG,
-};
-
-static int tda829x_find_tuner(struct dvb_frontend *fe)
-{
- struct tda8290_priv *priv = fe->analog_demod_priv;
- struct analog_demod_ops *analog_ops = &fe->ops.analog_ops;
- int i, ret, tuners_found;
- u32 tuner_addrs;
- u8 data;
- struct i2c_msg msg = { .flags = I2C_M_RD, .buf = &data, .len = 1 };
-
- if (!analog_ops->i2c_gate_ctrl) {
- printk(KERN_ERR "tda8290: no gate control were provided!\n");
-
- return -EINVAL;
- }
-
- analog_ops->i2c_gate_ctrl(fe, 1);
-
- /* probe for tuner chip */
- tuners_found = 0;
- tuner_addrs = 0;
- for (i = 0x60; i <= 0x63; i++) {
- msg.addr = i;
- ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
- if (ret == 1) {
- tuners_found++;
- tuner_addrs = (tuner_addrs << 8) + i;
- }
- }
- /* if there is more than one tuner, we expect the right one is
- behind the bridge and we choose the highest address that doesn't
- give a response now
- */
-
- analog_ops->i2c_gate_ctrl(fe, 0);
-
- if (tuners_found > 1)
- for (i = 0; i < tuners_found; i++) {
- msg.addr = tuner_addrs & 0xff;
- ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
- if (ret == 1)
- tuner_addrs = tuner_addrs >> 8;
- else
- break;
- }
-
- if (tuner_addrs == 0) {
- tuner_addrs = 0x60;
- tuner_info("could not clearly identify tuner address, "
- "defaulting to %x\n", tuner_addrs);
- } else {
- tuner_addrs = tuner_addrs & 0xff;
- tuner_info("setting tuner address to %x\n", tuner_addrs);
- }
- priv->tda827x_addr = tuner_addrs;
- msg.addr = tuner_addrs;
-
- analog_ops->i2c_gate_ctrl(fe, 1);
- ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
-
- if (ret != 1) {
- tuner_warn("tuner access failed!\n");
- analog_ops->i2c_gate_ctrl(fe, 0);
- return -EREMOTEIO;
- }
-
- if ((data == 0x83) || (data == 0x84)) {
- priv->ver |= TDA18271;
- tda829x_tda18271_config.config = priv->cfg.config;
- dvb_attach(tda18271_attach, fe, priv->tda827x_addr,
- priv->i2c_props.adap, &tda829x_tda18271_config);
- } else {
- if ((data & 0x3c) == 0)
- priv->ver |= TDA8275;
- else
- priv->ver |= TDA8275A;
-
- dvb_attach(tda827x_attach, fe, priv->tda827x_addr,
- priv->i2c_props.adap, &priv->cfg);
- priv->cfg.switch_addr = priv->i2c_props.addr;
- }
- if (fe->ops.tuner_ops.init)
- fe->ops.tuner_ops.init(fe);
-
- if (fe->ops.tuner_ops.sleep)
- fe->ops.tuner_ops.sleep(fe);
-
- analog_ops->i2c_gate_ctrl(fe, 0);
-
- return 0;
-}
-
-static int tda8290_probe(struct tuner_i2c_props *i2c_props)
-{
-#define TDA8290_ID 0x89
- u8 reg = 0x1f, id;
- struct i2c_msg msg_read[] = {
- { .addr = i2c_props->addr, .flags = 0, .len = 1, .buf = ® },
- { .addr = i2c_props->addr, .flags = I2C_M_RD, .len = 1, .buf = &id },
- };
-
- /* detect tda8290 */
- if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) {
- printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
- __func__, reg);
- return -ENODEV;
- }
-
- if (id == TDA8290_ID) {
- if (debug)
- printk(KERN_DEBUG "%s: tda8290 detected @ %d-%04x\n",
- __func__, i2c_adapter_id(i2c_props->adap),
- i2c_props->addr);
- return 0;
- }
- return -ENODEV;
-}
-
-static int tda8295_probe(struct tuner_i2c_props *i2c_props)
-{
-#define TDA8295_ID 0x8a
-#define TDA8295C2_ID 0x8b
- u8 reg = 0x2f, id;
- struct i2c_msg msg_read[] = {
- { .addr = i2c_props->addr, .flags = 0, .len = 1, .buf = ® },
- { .addr = i2c_props->addr, .flags = I2C_M_RD, .len = 1, .buf = &id },
- };
-
- /* detect tda8295 */
- if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) {
- printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
- __func__, reg);
- return -ENODEV;
- }
-
- if ((id & 0xfe) == TDA8295_ID) {
- if (debug)
- printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n",
- __func__, (id == TDA8295_ID) ?
- "tda8295c1" : "tda8295c2",
- i2c_adapter_id(i2c_props->adap),
- i2c_props->addr);
- return 0;
- }
-
- return -ENODEV;
-}
-
-static struct analog_demod_ops tda8290_ops = {
- .set_params = tda8290_set_params,
- .has_signal = tda8290_has_signal,
- .standby = tda8290_standby,
- .release = tda829x_release,
- .i2c_gate_ctrl = tda8290_i2c_bridge,
-};
-
-static struct analog_demod_ops tda8295_ops = {
- .set_params = tda8295_set_params,
- .has_signal = tda8295_has_signal,
- .standby = tda8295_standby,
- .release = tda829x_release,
- .i2c_gate_ctrl = tda8295_i2c_bridge,
-};
-
-struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap, u8 i2c_addr,
- struct tda829x_config *cfg)
-{
- struct tda8290_priv *priv = NULL;
- char *name;
-
- priv = kzalloc(sizeof(struct tda8290_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
- fe->analog_demod_priv = priv;
-
- priv->i2c_props.addr = i2c_addr;
- priv->i2c_props.adap = i2c_adap;
- priv->i2c_props.name = "tda829x";
- if (cfg)
- priv->cfg.config = cfg->lna_cfg;
-
- if (tda8290_probe(&priv->i2c_props) == 0) {
- priv->ver = TDA8290;
- memcpy(&fe->ops.analog_ops, &tda8290_ops,
- sizeof(struct analog_demod_ops));
- }
-
- if (tda8295_probe(&priv->i2c_props) == 0) {
- priv->ver = TDA8295;
- memcpy(&fe->ops.analog_ops, &tda8295_ops,
- sizeof(struct analog_demod_ops));
- }
-
- if (!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) {
- tda8295_power(fe, 1);
- if (tda829x_find_tuner(fe) < 0)
- goto fail;
- }
-
- switch (priv->ver) {
- case TDA8290:
- name = "tda8290";
- break;
- case TDA8295:
- name = "tda8295";
- break;
- case TDA8290 | TDA8275:
- name = "tda8290+75";
- break;
- case TDA8295 | TDA8275:
- name = "tda8295+75";
- break;
- case TDA8290 | TDA8275A:
- name = "tda8290+75a";
- break;
- case TDA8295 | TDA8275A:
- name = "tda8295+75a";
- break;
- case TDA8290 | TDA18271:
- name = "tda8290+18271";
- break;
- case TDA8295 | TDA18271:
- name = "tda8295+18271";
- break;
- default:
- goto fail;
- }
- tuner_info("type set to %s\n", name);
-
- fe->ops.analog_ops.info.name = name;
-
- if (priv->ver & TDA8290) {
- if (priv->ver & (TDA8275 | TDA8275A))
- tda8290_init_tuner(fe);
- tda8290_init_if(fe);
- } else if (priv->ver & TDA8295)
- tda8295_init_if(fe);
-
- return fe;
-
-fail:
- memset(&fe->ops.analog_ops, 0, sizeof(struct analog_demod_ops));
-
- tda829x_release(fe);
- return NULL;
-}
-EXPORT_SYMBOL_GPL(tda829x_attach);
-
-int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr)
-{
- struct tuner_i2c_props i2c_props = {
- .adap = i2c_adap,
- .addr = i2c_addr,
- };
-
- unsigned char soft_reset[] = { 0x00, 0x00 };
- unsigned char easy_mode_b[] = { 0x01, 0x02 };
- unsigned char easy_mode_g[] = { 0x01, 0x04 };
- unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 };
- unsigned char addr_dto_lsb = 0x07;
- unsigned char data;
-#define PROBE_BUFFER_SIZE 8
- unsigned char buf[PROBE_BUFFER_SIZE];
- int i;
-
- /* rule out tda9887, which would return the same byte repeatedly */
- tuner_i2c_xfer_send_recv(&i2c_props,
- soft_reset, 1, buf, PROBE_BUFFER_SIZE);
- for (i = 1; i < PROBE_BUFFER_SIZE; i++) {
- if (buf[i] != buf[0])
- break;
- }
-
- /* all bytes are equal, not a tda829x - probably a tda9887 */
- if (i == PROBE_BUFFER_SIZE)
- return -ENODEV;
-
- if ((tda8290_probe(&i2c_props) == 0) ||
- (tda8295_probe(&i2c_props) == 0))
- return 0;
-
- /* fall back to old probing method */
- tuner_i2c_xfer_send(&i2c_props, easy_mode_b, 2);
- tuner_i2c_xfer_send(&i2c_props, soft_reset, 2);
- tuner_i2c_xfer_send_recv(&i2c_props, &addr_dto_lsb, 1, &data, 1);
- if (data == 0) {
- tuner_i2c_xfer_send(&i2c_props, easy_mode_g, 2);
- tuner_i2c_xfer_send(&i2c_props, soft_reset, 2);
- tuner_i2c_xfer_send_recv(&i2c_props,
- &addr_dto_lsb, 1, &data, 1);
- if (data == 0x7b) {
- return 0;
- }
- }
- tuner_i2c_xfer_send(&i2c_props, restore_9886, 3);
- return -ENODEV;
-}
-EXPORT_SYMBOL_GPL(tda829x_probe);
-
-MODULE_DESCRIPTION("Philips/NXP TDA8290/TDA8295 analog IF demodulator driver");
-MODULE_AUTHOR("Gerd Knorr, Hartmut Hackmann, Michael Krufky");
-MODULE_LICENSE("GPL");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/tda8290.h b/drivers/media/common/tuners/tda8290.h
deleted file mode 100644
index 7e288b2..0000000
--- a/drivers/media/common/tuners/tda8290.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TDA8290_H__
-#define __TDA8290_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-struct tda829x_config {
- unsigned int lna_cfg;
-
- unsigned int probe_tuner:1;
-#define TDA829X_PROBE_TUNER 0
-#define TDA829X_DONT_PROBE 1
-};
-
-#if defined(CONFIG_MEDIA_TUNER_TDA8290) || (defined(CONFIG_MEDIA_TUNER_TDA8290_MODULE) && defined(MODULE))
-extern int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr);
-
-extern struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap,
- u8 i2c_addr,
- struct tda829x_config *cfg);
-#else
-static inline int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return -EINVAL;
-}
-
-static inline struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap,
- u8 i2c_addr,
- struct tda829x_config *cfg)
-{
- printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
- __func__);
- return NULL;
-}
-#endif
-
-#endif /* __TDA8290_H__ */
diff --git a/drivers/media/common/tuners/tda9887.c b/drivers/media/common/tuners/tda9887.c
deleted file mode 100644
index cdb645d..0000000
--- a/drivers/media/common/tuners/tda9887.c
+++ /dev/null
@@ -1,717 +0,0 @@
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/tuner.h>
-#include "tuner-i2c.h"
-#include "tda9887.h"
-
-
-/* Chips:
- TDA9885 (PAL, NTSC)
- TDA9886 (PAL, SECAM, NTSC)
- TDA9887 (PAL, SECAM, NTSC, FM Radio)
-
- Used as part of several tuners
-*/
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-static DEFINE_MUTEX(tda9887_list_mutex);
-static LIST_HEAD(hybrid_tuner_instance_list);
-
-struct tda9887_priv {
- struct tuner_i2c_props i2c_props;
- struct list_head hybrid_tuner_instance_list;
-
- unsigned char data[4];
- unsigned int config;
- unsigned int mode;
- unsigned int audmode;
- v4l2_std_id std;
-
- bool standby;
-};
-
-/* ---------------------------------------------------------------------- */
-
-#define UNSET (-1U)
-
-struct tvnorm {
- v4l2_std_id std;
- char *name;
- unsigned char b;
- unsigned char c;
- unsigned char e;
-};
-
-/* ---------------------------------------------------------------------- */
-
-//
-// TDA defines
-//
-
-//// first reg (b)
-#define cVideoTrapBypassOFF 0x00 // bit b0
-#define cVideoTrapBypassON 0x01 // bit b0
-
-#define cAutoMuteFmInactive 0x00 // bit b1
-#define cAutoMuteFmActive 0x02 // bit b1
-
-#define cIntercarrier 0x00 // bit b2
-#define cQSS 0x04 // bit b2
-
-#define cPositiveAmTV 0x00 // bit b3:4
-#define cFmRadio 0x08 // bit b3:4
-#define cNegativeFmTV 0x10 // bit b3:4
-
-
-#define cForcedMuteAudioON 0x20 // bit b5
-#define cForcedMuteAudioOFF 0x00 // bit b5
-
-#define cOutputPort1Active 0x00 // bit b6
-#define cOutputPort1Inactive 0x40 // bit b6
-
-#define cOutputPort2Active 0x00 // bit b7
-#define cOutputPort2Inactive 0x80 // bit b7
-
-
-//// second reg (c)
-#define cDeemphasisOFF 0x00 // bit c5
-#define cDeemphasisON 0x20 // bit c5
-
-#define cDeemphasis75 0x00 // bit c6
-#define cDeemphasis50 0x40 // bit c6
-
-#define cAudioGain0 0x00 // bit c7
-#define cAudioGain6 0x80 // bit c7
-
-#define cTopMask 0x1f // bit c0:4
-#define cTopDefault 0x10 // bit c0:4
-
-//// third reg (e)
-#define cAudioIF_4_5 0x00 // bit e0:1
-#define cAudioIF_5_5 0x01 // bit e0:1
-#define cAudioIF_6_0 0x02 // bit e0:1
-#define cAudioIF_6_5 0x03 // bit e0:1
-
-
-#define cVideoIFMask 0x1c // bit e2:4
-/* Video IF selection in TV Mode (bit B3=0) */
-#define cVideoIF_58_75 0x00 // bit e2:4
-#define cVideoIF_45_75 0x04 // bit e2:4
-#define cVideoIF_38_90 0x08 // bit e2:4
-#define cVideoIF_38_00 0x0C // bit e2:4
-#define cVideoIF_33_90 0x10 // bit e2:4
-#define cVideoIF_33_40 0x14 // bit e2:4
-#define cRadioIF_45_75 0x18 // bit e2:4
-#define cRadioIF_38_90 0x1C // bit e2:4
-
-/* IF1 selection in Radio Mode (bit B3=1) */
-#define cRadioIF_33_30 0x00 // bit e2,4 (also 0x10,0x14)
-#define cRadioIF_41_30 0x04 // bit e2,4
-
-/* Output of AFC pin in radio mode when bit E7=1 */
-#define cRadioAGC_SIF 0x00 // bit e3
-#define cRadioAGC_FM 0x08 // bit e3
-
-#define cTunerGainNormal 0x00 // bit e5
-#define cTunerGainLow 0x20 // bit e5
-
-#define cGating_18 0x00 // bit e6
-#define cGating_36 0x40 // bit e6
-
-#define cAgcOutON 0x80 // bit e7
-#define cAgcOutOFF 0x00 // bit e7
-
-/* ---------------------------------------------------------------------- */
-
-static struct tvnorm tvnorms[] = {
- {
- .std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H | V4L2_STD_PAL_N,
- .name = "PAL-BGHN",
- .b = ( cNegativeFmTV |
- cQSS ),
- .c = ( cDeemphasisON |
- cDeemphasis50 |
- cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_5_5 |
- cVideoIF_38_90 ),
- },{
- .std = V4L2_STD_PAL_I,
- .name = "PAL-I",
- .b = ( cNegativeFmTV |
- cQSS ),
- .c = ( cDeemphasisON |
- cDeemphasis50 |
- cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_6_0 |
- cVideoIF_38_90 ),
- },{
- .std = V4L2_STD_PAL_DK,
- .name = "PAL-DK",
- .b = ( cNegativeFmTV |
- cQSS ),
- .c = ( cDeemphasisON |
- cDeemphasis50 |
- cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_6_5 |
- cVideoIF_38_90 ),
- },{
- .std = V4L2_STD_PAL_M | V4L2_STD_PAL_Nc,
- .name = "PAL-M/Nc",
- .b = ( cNegativeFmTV |
- cQSS ),
- .c = ( cDeemphasisON |
- cDeemphasis75 |
- cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_4_5 |
- cVideoIF_45_75 ),
- },{
- .std = V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H,
- .name = "SECAM-BGH",
- .b = ( cNegativeFmTV |
- cQSS ),
- .c = ( cTopDefault),
- .e = ( cAudioIF_5_5 |
- cVideoIF_38_90 ),
- },{
- .std = V4L2_STD_SECAM_L,
- .name = "SECAM-L",
- .b = ( cPositiveAmTV |
- cQSS ),
- .c = ( cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_6_5 |
- cVideoIF_38_90 ),
- },{
- .std = V4L2_STD_SECAM_LC,
- .name = "SECAM-L'",
- .b = ( cOutputPort2Inactive |
- cPositiveAmTV |
- cQSS ),
- .c = ( cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_6_5 |
- cVideoIF_33_90 ),
- },{
- .std = V4L2_STD_SECAM_DK,
- .name = "SECAM-DK",
- .b = ( cNegativeFmTV |
- cQSS ),
- .c = ( cDeemphasisON |
- cDeemphasis50 |
- cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_6_5 |
- cVideoIF_38_90 ),
- },{
- .std = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
- .name = "NTSC-M",
- .b = ( cNegativeFmTV |
- cQSS ),
- .c = ( cDeemphasisON |
- cDeemphasis75 |
- cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_4_5 |
- cVideoIF_45_75 ),
- },{
- .std = V4L2_STD_NTSC_M_JP,
- .name = "NTSC-M-JP",
- .b = ( cNegativeFmTV |
- cQSS ),
- .c = ( cDeemphasisON |
- cDeemphasis50 |
- cTopDefault),
- .e = ( cGating_36 |
- cAudioIF_4_5 |
- cVideoIF_58_75 ),
- }
-};
-
-static struct tvnorm radio_stereo = {
- .name = "Radio Stereo",
- .b = ( cFmRadio |
- cQSS ),
- .c = ( cDeemphasisOFF |
- cAudioGain6 |
- cTopDefault),
- .e = ( cTunerGainLow |
- cAudioIF_5_5 |
- cRadioIF_38_90 ),
-};
-
-static struct tvnorm radio_mono = {
- .name = "Radio Mono",
- .b = ( cFmRadio |
- cQSS ),
- .c = ( cDeemphasisON |
- cDeemphasis75 |
- cTopDefault),
- .e = ( cTunerGainLow |
- cAudioIF_5_5 |
- cRadioIF_38_90 ),
-};
-
-/* ---------------------------------------------------------------------- */
-
-static void dump_read_message(struct dvb_frontend *fe, unsigned char *buf)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
-
- static char *afc[16] = {
- "- 12.5 kHz",
- "- 37.5 kHz",
- "- 62.5 kHz",
- "- 87.5 kHz",
- "-112.5 kHz",
- "-137.5 kHz",
- "-162.5 kHz",
- "-187.5 kHz [min]",
- "+187.5 kHz [max]",
- "+162.5 kHz",
- "+137.5 kHz",
- "+112.5 kHz",
- "+ 87.5 kHz",
- "+ 62.5 kHz",
- "+ 37.5 kHz",
- "+ 12.5 kHz",
- };
- tuner_info("read: 0x%2x\n", buf[0]);
- tuner_info(" after power on : %s\n", (buf[0] & 0x01) ? "yes" : "no");
- tuner_info(" afc : %s\n", afc[(buf[0] >> 1) & 0x0f]);
- tuner_info(" fmif level : %s\n", (buf[0] & 0x20) ? "high" : "low");
- tuner_info(" afc window : %s\n", (buf[0] & 0x40) ? "in" : "out");
- tuner_info(" vfi level : %s\n", (buf[0] & 0x80) ? "high" : "low");
-}
-
-static void dump_write_message(struct dvb_frontend *fe, unsigned char *buf)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
-
- static char *sound[4] = {
- "AM/TV",
- "FM/radio",
- "FM/TV",
- "FM/radio"
- };
- static char *adjust[32] = {
- "-16", "-15", "-14", "-13", "-12", "-11", "-10", "-9",
- "-8", "-7", "-6", "-5", "-4", "-3", "-2", "-1",
- "0", "+1", "+2", "+3", "+4", "+5", "+6", "+7",
- "+8", "+9", "+10", "+11", "+12", "+13", "+14", "+15"
- };
- static char *deemph[4] = {
- "no", "no", "75", "50"
- };
- static char *carrier[4] = {
- "4.5 MHz",
- "5.5 MHz",
- "6.0 MHz",
- "6.5 MHz / AM"
- };
- static char *vif[8] = {
- "58.75 MHz",
- "45.75 MHz",
- "38.9 MHz",
- "38.0 MHz",
- "33.9 MHz",
- "33.4 MHz",
- "45.75 MHz + pin13",
- "38.9 MHz + pin13",
- };
- static char *rif[4] = {
- "44 MHz",
- "52 MHz",
- "52 MHz",
- "44 MHz",
- };
-
- tuner_info("write: byte B 0x%02x\n", buf[1]);
- tuner_info(" B0 video mode : %s\n",
- (buf[1] & 0x01) ? "video trap" : "sound trap");
- tuner_info(" B1 auto mute fm : %s\n",
- (buf[1] & 0x02) ? "yes" : "no");
- tuner_info(" B2 carrier mode : %s\n",
- (buf[1] & 0x04) ? "QSS" : "Intercarrier");
- tuner_info(" B3-4 tv sound/radio : %s\n",
- sound[(buf[1] & 0x18) >> 3]);
- tuner_info(" B5 force mute audio: %s\n",
- (buf[1] & 0x20) ? "yes" : "no");
- tuner_info(" B6 output port 1 : %s\n",
- (buf[1] & 0x40) ? "high (inactive)" : "low (active)");
- tuner_info(" B7 output port 2 : %s\n",
- (buf[1] & 0x80) ? "high (inactive)" : "low (active)");
-
- tuner_info("write: byte C 0x%02x\n", buf[2]);
- tuner_info(" C0-4 top adjustment : %s dB\n",
- adjust[buf[2] & 0x1f]);
- tuner_info(" C5-6 de-emphasis : %s\n",
- deemph[(buf[2] & 0x60) >> 5]);
- tuner_info(" C7 audio gain : %s\n",
- (buf[2] & 0x80) ? "-6" : "0");
-
- tuner_info("write: byte E 0x%02x\n", buf[3]);
- tuner_info(" E0-1 sound carrier : %s\n",
- carrier[(buf[3] & 0x03)]);
- tuner_info(" E6 l pll gating : %s\n",
- (buf[3] & 0x40) ? "36" : "13");
-
- if (buf[1] & 0x08) {
- /* radio */
- tuner_info(" E2-4 video if : %s\n",
- rif[(buf[3] & 0x0c) >> 2]);
- tuner_info(" E7 vif agc output : %s\n",
- (buf[3] & 0x80)
- ? ((buf[3] & 0x10) ? "fm-agc radio" :
- "sif-agc radio")
- : "fm radio carrier afc");
- } else {
- /* video */
- tuner_info(" E2-4 video if : %s\n",
- vif[(buf[3] & 0x1c) >> 2]);
- tuner_info(" E5 tuner gain : %s\n",
- (buf[3] & 0x80)
- ? ((buf[3] & 0x20) ? "external" : "normal")
- : ((buf[3] & 0x20) ? "minimum" : "normal"));
- tuner_info(" E7 vif agc output : %s\n",
- (buf[3] & 0x80) ? ((buf[3] & 0x20)
- ? "pin3 port, pin22 vif agc out"
- : "pin22 port, pin3 vif acg ext in")
- : "pin3+pin22 port");
- }
- tuner_info("--\n");
-}
-
-/* ---------------------------------------------------------------------- */
-
-static int tda9887_set_tvnorm(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
- struct tvnorm *norm = NULL;
- char *buf = priv->data;
- int i;
-
- if (priv->mode == V4L2_TUNER_RADIO) {
- if (priv->audmode == V4L2_TUNER_MODE_MONO)
- norm = &radio_mono;
- else
- norm = &radio_stereo;
- } else {
- for (i = 0; i < ARRAY_SIZE(tvnorms); i++) {
- if (tvnorms[i].std & priv->std) {
- norm = tvnorms+i;
- break;
- }
- }
- }
- if (NULL == norm) {
- tuner_dbg("Unsupported tvnorm entry - audio muted\n");
- return -1;
- }
-
- tuner_dbg("configure for: %s\n", norm->name);
- buf[1] = norm->b;
- buf[2] = norm->c;
- buf[3] = norm->e;
- return 0;
-}
-
-static unsigned int port1 = UNSET;
-static unsigned int port2 = UNSET;
-static unsigned int qss = UNSET;
-static unsigned int adjust = UNSET;
-
-module_param(port1, int, 0644);
-module_param(port2, int, 0644);
-module_param(qss, int, 0644);
-module_param(adjust, int, 0644);
-
-static int tda9887_set_insmod(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
- char *buf = priv->data;
-
- if (UNSET != port1) {
- if (port1)
- buf[1] |= cOutputPort1Inactive;
- else
- buf[1] &= ~cOutputPort1Inactive;
- }
- if (UNSET != port2) {
- if (port2)
- buf[1] |= cOutputPort2Inactive;
- else
- buf[1] &= ~cOutputPort2Inactive;
- }
-
- if (UNSET != qss) {
- if (qss)
- buf[1] |= cQSS;
- else
- buf[1] &= ~cQSS;
- }
-
- if (adjust < 0x20) {
- buf[2] &= ~cTopMask;
- buf[2] |= adjust;
- }
- return 0;
-}
-
-static int tda9887_do_config(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
- char *buf = priv->data;
-
- if (priv->config & TDA9887_PORT1_ACTIVE)
- buf[1] &= ~cOutputPort1Inactive;
- if (priv->config & TDA9887_PORT1_INACTIVE)
- buf[1] |= cOutputPort1Inactive;
- if (priv->config & TDA9887_PORT2_ACTIVE)
- buf[1] &= ~cOutputPort2Inactive;
- if (priv->config & TDA9887_PORT2_INACTIVE)
- buf[1] |= cOutputPort2Inactive;
-
- if (priv->config & TDA9887_QSS)
- buf[1] |= cQSS;
- if (priv->config & TDA9887_INTERCARRIER)
- buf[1] &= ~cQSS;
-
- if (priv->config & TDA9887_AUTOMUTE)
- buf[1] |= cAutoMuteFmActive;
- if (priv->config & TDA9887_DEEMPHASIS_MASK) {
- buf[2] &= ~0x60;
- switch (priv->config & TDA9887_DEEMPHASIS_MASK) {
- case TDA9887_DEEMPHASIS_NONE:
- buf[2] |= cDeemphasisOFF;
- break;
- case TDA9887_DEEMPHASIS_50:
- buf[2] |= cDeemphasisON | cDeemphasis50;
- break;
- case TDA9887_DEEMPHASIS_75:
- buf[2] |= cDeemphasisON | cDeemphasis75;
- break;
- }
- }
- if (priv->config & TDA9887_TOP_SET) {
- buf[2] &= ~cTopMask;
- buf[2] |= (priv->config >> 8) & cTopMask;
- }
- if ((priv->config & TDA9887_INTERCARRIER_NTSC) &&
- (priv->std & V4L2_STD_NTSC))
- buf[1] &= ~cQSS;
- if (priv->config & TDA9887_GATING_18)
- buf[3] &= ~cGating_36;
-
- if (priv->mode == V4L2_TUNER_RADIO) {
- if (priv->config & TDA9887_RIF_41_3) {
- buf[3] &= ~cVideoIFMask;
- buf[3] |= cRadioIF_41_30;
- }
- if (priv->config & TDA9887_GAIN_NORMAL)
- buf[3] &= ~cTunerGainLow;
- }
-
- return 0;
-}
-
-/* ---------------------------------------------------------------------- */
-
-static int tda9887_status(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
- unsigned char buf[1];
- int rc;
-
- memset(buf,0,sizeof(buf));
- if (1 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props,buf,1)))
- tuner_info("i2c i/o error: rc == %d (should be 1)\n", rc);
- dump_read_message(fe, buf);
- return 0;
-}
-
-static void tda9887_configure(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
- int rc;
-
- memset(priv->data,0,sizeof(priv->data));
- tda9887_set_tvnorm(fe);
-
- /* A note on the port settings:
- These settings tend to depend on the specifics of the board.
- By default they are set to inactive (bit value 1) by this driver,
- overwriting any changes made by the tvnorm. This means that it
- is the responsibility of the module using the tda9887 to set
- these values in case of changes in the tvnorm.
- In many cases port 2 should be made active (0) when selecting
- SECAM-L, and port 2 should remain inactive (1) for SECAM-L'.
-
- For the other standards the tda9887 application note says that
- the ports should be set to active (0), but, again, that may
- differ depending on the precise hardware configuration.
- */
- priv->data[1] |= cOutputPort1Inactive;
- priv->data[1] |= cOutputPort2Inactive;
-
- tda9887_do_config(fe);
- tda9887_set_insmod(fe);
-
- if (priv->standby)
- priv->data[1] |= cForcedMuteAudioON;
-
- tuner_dbg("writing: b=0x%02x c=0x%02x e=0x%02x\n",
- priv->data[1], priv->data[2], priv->data[3]);
- if (debug > 1)
- dump_write_message(fe, priv->data);
-
- if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,priv->data,4)))
- tuner_info("i2c i/o error: rc == %d (should be 4)\n", rc);
-
- if (debug > 2) {
- msleep_interruptible(1000);
- tda9887_status(fe);
- }
-}
-
-/* ---------------------------------------------------------------------- */
-
-static void tda9887_tuner_status(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
- tuner_info("Data bytes: b=0x%02x c=0x%02x e=0x%02x\n",
- priv->data[1], priv->data[2], priv->data[3]);
-}
-
-static int tda9887_get_afc(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
- static int AFC_BITS_2_kHz[] = {
- -12500, -37500, -62500, -97500,
- -112500, -137500, -162500, -187500,
- 187500, 162500, 137500, 112500,
- 97500 , 62500, 37500 , 12500
- };
- int afc=0;
- __u8 reg = 0;
-
- if (1 == tuner_i2c_xfer_recv(&priv->i2c_props,®,1))
- afc = AFC_BITS_2_kHz[(reg>>1)&0x0f];
-
- return afc;
-}
-
-static void tda9887_standby(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
-
- priv->standby = true;
-
- tda9887_configure(fe);
-}
-
-static void tda9887_set_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
-
- priv->standby = false;
- priv->mode = params->mode;
- priv->audmode = params->audmode;
- priv->std = params->std;
- tda9887_configure(fe);
-}
-
-static int tda9887_set_config(struct dvb_frontend *fe, void *priv_cfg)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
-
- priv->config = *(unsigned int *)priv_cfg;
- tda9887_configure(fe);
-
- return 0;
-}
-
-static void tda9887_release(struct dvb_frontend *fe)
-{
- struct tda9887_priv *priv = fe->analog_demod_priv;
-
- mutex_lock(&tda9887_list_mutex);
-
- if (priv)
- hybrid_tuner_release_state(priv);
-
- mutex_unlock(&tda9887_list_mutex);
-
- fe->analog_demod_priv = NULL;
-}
-
-static struct analog_demod_ops tda9887_ops = {
- .info = {
- .name = "tda9887",
- },
- .set_params = tda9887_set_params,
- .standby = tda9887_standby,
- .tuner_status = tda9887_tuner_status,
- .get_afc = tda9887_get_afc,
- .release = tda9887_release,
- .set_config = tda9887_set_config,
-};
-
-struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap,
- u8 i2c_addr)
-{
- struct tda9887_priv *priv = NULL;
- int instance;
-
- mutex_lock(&tda9887_list_mutex);
-
- instance = hybrid_tuner_request_state(struct tda9887_priv, priv,
- hybrid_tuner_instance_list,
- i2c_adap, i2c_addr, "tda9887");
- switch (instance) {
- case 0:
- mutex_unlock(&tda9887_list_mutex);
- return NULL;
- case 1:
- fe->analog_demod_priv = priv;
- priv->standby = true;
- tuner_info("tda988[5/6/7] found\n");
- break;
- default:
- fe->analog_demod_priv = priv;
- break;
- }
-
- mutex_unlock(&tda9887_list_mutex);
-
- memcpy(&fe->ops.analog_ops, &tda9887_ops,
- sizeof(struct analog_demod_ops));
-
- return fe;
-}
-EXPORT_SYMBOL_GPL(tda9887_attach);
-
-MODULE_LICENSE("GPL");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/tda9887.h b/drivers/media/common/tuners/tda9887.h
deleted file mode 100644
index acc419e..0000000
--- a/drivers/media/common/tuners/tda9887.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TDA9887_H__
-#define __TDA9887_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-/* ------------------------------------------------------------------------ */
-#if defined(CONFIG_MEDIA_TUNER_TDA9887) || (defined(CONFIG_MEDIA_TUNER_TDA9887_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap,
- u8 i2c_addr);
-#else
-static inline struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap,
- u8 i2c_addr)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif /* __TDA9887_H__ */
diff --git a/drivers/media/common/tuners/tea5761.c b/drivers/media/common/tuners/tea5761.c
deleted file mode 100644
index bf78cb9..0000000
--- a/drivers/media/common/tuners/tea5761.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * For Philips TEA5761 FM Chip
- * I2C address is allways 0x20 (0x10 at 7-bit mode).
- *
- * Copyright (c) 2005-2007 Mauro Carvalho Chehab (mchehab@infradead.org)
- * This code is placed under the terms of the GNUv2 General Public License
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <media/tuner.h>
-#include "tuner-i2c.h"
-#include "tea5761.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-struct tea5761_priv {
- struct tuner_i2c_props i2c_props;
-
- u32 frequency;
- bool standby;
-};
-
-/*****************************************************************************/
-
-/***************************
- * TEA5761HN I2C registers *
- ***************************/
-
-/* INTREG - Read: bytes 0 and 1 / Write: byte 0 */
-
- /* first byte for reading */
-#define TEA5761_INTREG_IFFLAG 0x10
-#define TEA5761_INTREG_LEVFLAG 0x8
-#define TEA5761_INTREG_FRRFLAG 0x2
-#define TEA5761_INTREG_BLFLAG 0x1
-
- /* second byte for reading / byte for writing */
-#define TEA5761_INTREG_IFMSK 0x10
-#define TEA5761_INTREG_LEVMSK 0x8
-#define TEA5761_INTREG_FRMSK 0x2
-#define TEA5761_INTREG_BLMSK 0x1
-
-/* FRQSET - Read: bytes 2 and 3 / Write: byte 1 and 2 */
-
- /* First byte */
-#define TEA5761_FRQSET_SEARCH_UP 0x80 /* 1=Station search from botton to up */
-#define TEA5761_FRQSET_SEARCH_MODE 0x40 /* 1=Search mode */
-
- /* Bits 0-5 for divider MSB */
-
- /* Second byte */
- /* Bits 0-7 for divider LSB */
-
-/* TNCTRL - Read: bytes 4 and 5 / Write: Bytes 3 and 4 */
-
- /* first byte */
-
-#define TEA5761_TNCTRL_PUPD_0 0x40 /* Power UP/Power Down MSB */
-#define TEA5761_TNCTRL_BLIM 0X20 /* 1= Japan Frequencies, 0= European frequencies */
-#define TEA5761_TNCTRL_SWPM 0x10 /* 1= software port is FRRFLAG */
-#define TEA5761_TNCTRL_IFCTC 0x08 /* 1= IF count time 15.02 ms, 0= IF count time 2.02 ms */
-#define TEA5761_TNCTRL_AFM 0x04
-#define TEA5761_TNCTRL_SMUTE 0x02 /* 1= Soft mute */
-#define TEA5761_TNCTRL_SNC 0x01
-
- /* second byte */
-
-#define TEA5761_TNCTRL_MU 0x80 /* 1=Hard mute */
-#define TEA5761_TNCTRL_SSL_1 0x40
-#define TEA5761_TNCTRL_SSL_0 0x20
-#define TEA5761_TNCTRL_HLSI 0x10
-#define TEA5761_TNCTRL_MST 0x08 /* 1 = mono */
-#define TEA5761_TNCTRL_SWP 0x04
-#define TEA5761_TNCTRL_DTC 0x02 /* 1 = deemphasis 50 us, 0 = deemphasis 75 us */
-#define TEA5761_TNCTRL_AHLSI 0x01
-
-/* FRQCHECK - Read: bytes 6 and 7 */
- /* First byte */
-
- /* Bits 0-5 for divider MSB */
-
- /* Second byte */
- /* Bits 0-7 for divider LSB */
-
-/* TUNCHECK - Read: bytes 8 and 9 */
-
- /* First byte */
-#define TEA5761_TUNCHECK_IF_MASK 0x7e /* IF count */
-#define TEA5761_TUNCHECK_TUNTO 0x01
-
- /* Second byte */
-#define TEA5761_TUNCHECK_LEV_MASK 0xf0 /* Level Count */
-#define TEA5761_TUNCHECK_LD 0x08
-#define TEA5761_TUNCHECK_STEREO 0x04
-
-/* TESTREG - Read: bytes 10 and 11 / Write: bytes 5 and 6 */
-
- /* All zero = no test mode */
-
-/* MANID - Read: bytes 12 and 13 */
-
- /* First byte - should be 0x10 */
-#define TEA5767_MANID_VERSION_MASK 0xf0 /* Version = 1 */
-#define TEA5767_MANID_ID_MSB_MASK 0x0f /* Manufacurer ID - should be 0 */
-
- /* Second byte - Should be 0x2b */
-
-#define TEA5767_MANID_ID_LSB_MASK 0xfe /* Manufacturer ID - should be 0x15 */
-#define TEA5767_MANID_IDAV 0x01 /* 1 = Chip has ID, 0 = Chip has no ID */
-
-/* Chip ID - Read: bytes 14 and 15 */
-
- /* First byte - should be 0x57 */
-
- /* Second byte - should be 0x61 */
-
-/*****************************************************************************/
-
-#define FREQ_OFFSET 0 /* for TEA5767, it is 700 to give the right freq */
-static void tea5761_status_dump(unsigned char *buffer)
-{
- unsigned int div, frq;
-
- div = ((buffer[2] & 0x3f) << 8) | buffer[3];
-
- frq = 1000 * (div * 32768 / 1000 + FREQ_OFFSET + 225) / 4; /* Freq in KHz */
-
- printk(KERN_INFO "tea5761: Frequency %d.%03d KHz (divider = 0x%04x)\n",
- frq / 1000, frq % 1000, div);
-}
-
-/* Freq should be specifyed at 62.5 Hz */
-static int __set_radio_freq(struct dvb_frontend *fe,
- unsigned int freq,
- bool mono)
-{
- struct tea5761_priv *priv = fe->tuner_priv;
- unsigned int frq = freq;
- unsigned char buffer[7] = {0, 0, 0, 0, 0, 0, 0 };
- unsigned div;
- int rc;
-
- tuner_dbg("radio freq counter %d\n", frq);
-
- if (priv->standby) {
- tuner_dbg("TEA5761 set to standby mode\n");
- buffer[5] |= TEA5761_TNCTRL_MU;
- } else {
- buffer[4] |= TEA5761_TNCTRL_PUPD_0;
- }
-
-
- if (mono) {
- tuner_dbg("TEA5761 set to mono\n");
- buffer[5] |= TEA5761_TNCTRL_MST;
- } else {
- tuner_dbg("TEA5761 set to stereo\n");
- }
-
- div = (1000 * (frq * 4 / 16 + 700 + 225) ) >> 15;
- buffer[1] = (div >> 8) & 0x3f;
- buffer[2] = div & 0xff;
-
- if (debug)
- tea5761_status_dump(buffer);
-
- if (7 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 7)))
- tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
-
- priv->frequency = frq * 125 / 2;
-
- return 0;
-}
-
-static int set_radio_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tea5761_priv *priv = fe->analog_demod_priv;
-
- priv->standby = false;
-
- return __set_radio_freq(fe, params->frequency,
- params->audmode == V4L2_TUNER_MODE_MONO);
-}
-
-static int set_radio_sleep(struct dvb_frontend *fe)
-{
- struct tea5761_priv *priv = fe->analog_demod_priv;
-
- priv->standby = true;
-
- return __set_radio_freq(fe, priv->frequency, false);
-}
-
-static int tea5761_read_status(struct dvb_frontend *fe, char *buffer)
-{
- struct tea5761_priv *priv = fe->tuner_priv;
- int rc;
-
- memset(buffer, 0, 16);
- if (16 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 16))) {
- tuner_warn("i2c i/o error: rc == %d (should be 16)\n", rc);
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static inline int tea5761_signal(struct dvb_frontend *fe, const char *buffer)
-{
- struct tea5761_priv *priv = fe->tuner_priv;
-
- int signal = ((buffer[9] & TEA5761_TUNCHECK_LEV_MASK) << (13 - 4));
-
- tuner_dbg("Signal strength: %d\n", signal);
-
- return signal;
-}
-
-static inline int tea5761_stereo(struct dvb_frontend *fe, const char *buffer)
-{
- struct tea5761_priv *priv = fe->tuner_priv;
-
- int stereo = buffer[9] & TEA5761_TUNCHECK_STEREO;
-
- tuner_dbg("Radio ST GET = %02x\n", stereo);
-
- return (stereo ? V4L2_TUNER_SUB_STEREO : 0);
-}
-
-static int tea5761_get_status(struct dvb_frontend *fe, u32 *status)
-{
- unsigned char buffer[16];
-
- *status = 0;
-
- if (0 == tea5761_read_status(fe, buffer)) {
- if (tea5761_signal(fe, buffer))
- *status = TUNER_STATUS_LOCKED;
- if (tea5761_stereo(fe, buffer))
- *status |= TUNER_STATUS_STEREO;
- }
-
- return 0;
-}
-
-static int tea5761_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
-{
- unsigned char buffer[16];
-
- *strength = 0;
-
- if (0 == tea5761_read_status(fe, buffer))
- *strength = tea5761_signal(fe, buffer);
-
- return 0;
-}
-
-int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr)
-{
- unsigned char buffer[16];
- int rc;
- struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr };
-
- if (16 != (rc = tuner_i2c_xfer_recv(&i2c, buffer, 16))) {
- printk(KERN_WARNING "it is not a TEA5761. Received %i chars.\n", rc);
- return -EINVAL;
- }
-
- if ((buffer[13] != 0x2b) || (buffer[14] != 0x57) || (buffer[15] != 0x061)) {
- printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x."
- " It is not a TEA5761\n",
- buffer[13], buffer[14], buffer[15]);
- return -EINVAL;
- }
- printk(KERN_WARNING "tea5761: TEA%02x%02x detected. "
- "Manufacturer ID= 0x%02x\n",
- buffer[14], buffer[15], buffer[13]);
-
- return 0;
-}
-
-static int tea5761_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int tea5761_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct tea5761_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static struct dvb_tuner_ops tea5761_tuner_ops = {
- .info = {
- .name = "tea5761", // Philips TEA5761HN FM Radio
- },
- .set_analog_params = set_radio_freq,
- .sleep = set_radio_sleep,
- .release = tea5761_release,
- .get_frequency = tea5761_get_frequency,
- .get_status = tea5761_get_status,
- .get_rf_strength = tea5761_get_rf_strength,
-};
-
-struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr)
-{
- struct tea5761_priv *priv = NULL;
-
- if (tea5761_autodetection(i2c_adap, i2c_addr) != 0)
- return NULL;
-
- priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
- fe->tuner_priv = priv;
-
- priv->i2c_props.addr = i2c_addr;
- priv->i2c_props.adap = i2c_adap;
- priv->i2c_props.name = "tea5761";
-
- memcpy(&fe->ops.tuner_ops, &tea5761_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- tuner_info("type set to %s\n", "Philips TEA5761HN FM Radio");
-
- return fe;
-}
-
-
-EXPORT_SYMBOL_GPL(tea5761_attach);
-EXPORT_SYMBOL_GPL(tea5761_autodetection);
-
-MODULE_DESCRIPTION("Philips TEA5761 FM tuner driver");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/tea5761.h b/drivers/media/common/tuners/tea5761.h
deleted file mode 100644
index 2e2ff82..0000000
--- a/drivers/media/common/tuners/tea5761.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TEA5761_H__
-#define __TEA5761_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-#if defined(CONFIG_MEDIA_TUNER_TEA5761) || (defined(CONFIG_MEDIA_TUNER_TEA5761_MODULE) && defined(MODULE))
-extern int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr);
-
-extern struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr);
-#else
-static inline int tea5761_autodetection(struct i2c_adapter* i2c_adap,
- u8 i2c_addr)
-{
- printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
- __func__);
- return -EINVAL;
-}
-
-static inline struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif /* __TEA5761_H__ */
diff --git a/drivers/media/common/tuners/tea5767.c b/drivers/media/common/tuners/tea5767.c
deleted file mode 100644
index 36e85d8..0000000
--- a/drivers/media/common/tuners/tea5767.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
- * I2C address is allways 0xC0.
- *
- *
- * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@infradead.org)
- * This code is placed under the terms of the GNU General Public License
- *
- * tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
- * from their contributions on DScaler.
- */
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include "tuner-i2c.h"
-#include "tea5767.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-/*****************************************************************************/
-
-struct tea5767_priv {
- struct tuner_i2c_props i2c_props;
- u32 frequency;
- struct tea5767_ctrl ctrl;
-};
-
-/*****************************************************************************/
-
-/******************************
- * Write mode register values *
- ******************************/
-
-/* First register */
-#define TEA5767_MUTE 0x80 /* Mutes output */
-#define TEA5767_SEARCH 0x40 /* Activates station search */
-/* Bits 0-5 for divider MSB */
-
-/* Second register */
-/* Bits 0-7 for divider LSB */
-
-/* Third register */
-
-/* Station search from botton to up */
-#define TEA5767_SEARCH_UP 0x80
-
-/* Searches with ADC output = 10 */
-#define TEA5767_SRCH_HIGH_LVL 0x60
-
-/* Searches with ADC output = 10 */
-#define TEA5767_SRCH_MID_LVL 0x40
-
-/* Searches with ADC output = 5 */
-#define TEA5767_SRCH_LOW_LVL 0x20
-
-/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
-#define TEA5767_HIGH_LO_INJECT 0x10
-
-/* Disable stereo */
-#define TEA5767_MONO 0x08
-
-/* Disable right channel and turns to mono */
-#define TEA5767_MUTE_RIGHT 0x04
-
-/* Disable left channel and turns to mono */
-#define TEA5767_MUTE_LEFT 0x02
-
-#define TEA5767_PORT1_HIGH 0x01
-
-/* Fourth register */
-#define TEA5767_PORT2_HIGH 0x80
-/* Chips stops working. Only I2C bus remains on */
-#define TEA5767_STDBY 0x40
-
-/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
-#define TEA5767_JAPAN_BAND 0x20
-
-/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
-#define TEA5767_XTAL_32768 0x10
-
-/* Cuts weak signals */
-#define TEA5767_SOFT_MUTE 0x08
-
-/* Activates high cut control */
-#define TEA5767_HIGH_CUT_CTRL 0x04
-
-/* Activates stereo noise control */
-#define TEA5767_ST_NOISE_CTL 0x02
-
-/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
-#define TEA5767_SRCH_IND 0x01
-
-/* Fifth register */
-
-/* By activating, it will use Xtal at 13 MHz as reference for divider */
-#define TEA5767_PLLREF_ENABLE 0x80
-
-/* By activating, deemphasis=50, or else, deemphasis of 50us */
-#define TEA5767_DEEMPH_75 0X40
-
-/*****************************
- * Read mode register values *
- *****************************/
-
-/* First register */
-#define TEA5767_READY_FLAG_MASK 0x80
-#define TEA5767_BAND_LIMIT_MASK 0X40
-/* Bits 0-5 for divider MSB after search or preset */
-
-/* Second register */
-/* Bits 0-7 for divider LSB after search or preset */
-
-/* Third register */
-#define TEA5767_STEREO_MASK 0x80
-#define TEA5767_IF_CNTR_MASK 0x7f
-
-/* Fourth register */
-#define TEA5767_ADC_LEVEL_MASK 0xf0
-
-/* should be 0 */
-#define TEA5767_CHIP_ID_MASK 0x0f
-
-/* Fifth register */
-/* Reserved for future extensions */
-#define TEA5767_RESERVED_MASK 0xff
-
-/*****************************************************************************/
-
-static void tea5767_status_dump(struct tea5767_priv *priv,
- unsigned char *buffer)
-{
- unsigned int div, frq;
-
- if (TEA5767_READY_FLAG_MASK & buffer[0])
- tuner_info("Ready Flag ON\n");
- else
- tuner_info("Ready Flag OFF\n");
-
- if (TEA5767_BAND_LIMIT_MASK & buffer[0])
- tuner_info("Tuner at band limit\n");
- else
- tuner_info("Tuner not at band limit\n");
-
- div = ((buffer[0] & 0x3f) << 8) | buffer[1];
-
- switch (priv->ctrl.xtal_freq) {
- case TEA5767_HIGH_LO_13MHz:
- frq = (div * 50000 - 700000 - 225000) / 4; /* Freq in KHz */
- break;
- case TEA5767_LOW_LO_13MHz:
- frq = (div * 50000 + 700000 + 225000) / 4; /* Freq in KHz */
- break;
- case TEA5767_LOW_LO_32768:
- frq = (div * 32768 + 700000 + 225000) / 4; /* Freq in KHz */
- break;
- case TEA5767_HIGH_LO_32768:
- default:
- frq = (div * 32768 - 700000 - 225000) / 4; /* Freq in KHz */
- break;
- }
- buffer[0] = (div >> 8) & 0x3f;
- buffer[1] = div & 0xff;
-
- tuner_info("Frequency %d.%03d KHz (divider = 0x%04x)\n",
- frq / 1000, frq % 1000, div);
-
- if (TEA5767_STEREO_MASK & buffer[2])
- tuner_info("Stereo\n");
- else
- tuner_info("Mono\n");
-
- tuner_info("IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK);
-
- tuner_info("ADC Level = %d\n",
- (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4);
-
- tuner_info("Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK));
-
- tuner_info("Reserved = 0x%02x\n",
- (buffer[4] & TEA5767_RESERVED_MASK));
-}
-
-/* Freq should be specifyed at 62.5 Hz */
-static int set_radio_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tea5767_priv *priv = fe->tuner_priv;
- unsigned int frq = params->frequency;
- unsigned char buffer[5];
- unsigned div;
- int rc;
-
- tuner_dbg("radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000);
-
- buffer[2] = 0;
-
- if (priv->ctrl.port1)
- buffer[2] |= TEA5767_PORT1_HIGH;
-
- if (params->audmode == V4L2_TUNER_MODE_MONO) {
- tuner_dbg("TEA5767 set to mono\n");
- buffer[2] |= TEA5767_MONO;
- } else {
- tuner_dbg("TEA5767 set to stereo\n");
- }
-
-
- buffer[3] = 0;
-
- if (priv->ctrl.port2)
- buffer[3] |= TEA5767_PORT2_HIGH;
-
- if (priv->ctrl.high_cut)
- buffer[3] |= TEA5767_HIGH_CUT_CTRL;
-
- if (priv->ctrl.st_noise)
- buffer[3] |= TEA5767_ST_NOISE_CTL;
-
- if (priv->ctrl.soft_mute)
- buffer[3] |= TEA5767_SOFT_MUTE;
-
- if (priv->ctrl.japan_band)
- buffer[3] |= TEA5767_JAPAN_BAND;
-
- buffer[4] = 0;
-
- if (priv->ctrl.deemph_75)
- buffer[4] |= TEA5767_DEEMPH_75;
-
- if (priv->ctrl.pllref)
- buffer[4] |= TEA5767_PLLREF_ENABLE;
-
-
- /* Rounds freq to next decimal value - for 62.5 KHz step */
- /* frq = 20*(frq/16)+radio_frq[frq%16]; */
-
- switch (priv->ctrl.xtal_freq) {
- case TEA5767_HIGH_LO_13MHz:
- tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n");
- buffer[2] |= TEA5767_HIGH_LO_INJECT;
- div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000;
- break;
- case TEA5767_LOW_LO_13MHz:
- tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n");
-
- div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000;
- break;
- case TEA5767_LOW_LO_32768:
- tuner_dbg("radio LOW LO inject xtal @ 32,768 MHz\n");
- buffer[3] |= TEA5767_XTAL_32768;
- /* const 700=4000*175 Khz - to adjust freq to right value */
- div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15;
- break;
- case TEA5767_HIGH_LO_32768:
- default:
- tuner_dbg("radio HIGH LO inject xtal @ 32,768 MHz\n");
-
- buffer[2] |= TEA5767_HIGH_LO_INJECT;
- buffer[3] |= TEA5767_XTAL_32768;
- div = ((frq * (4000 / 16) + 700000 + 225000) + 16384) >> 15;
- break;
- }
- buffer[0] = (div >> 8) & 0x3f;
- buffer[1] = div & 0xff;
-
- if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))
- tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
-
- if (debug) {
- if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5)))
- tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
- else
- tea5767_status_dump(priv, buffer);
- }
-
- priv->frequency = frq * 125 / 2;
-
- return 0;
-}
-
-static int tea5767_read_status(struct dvb_frontend *fe, char *buffer)
-{
- struct tea5767_priv *priv = fe->tuner_priv;
- int rc;
-
- memset(buffer, 0, 5);
- if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) {
- tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static inline int tea5767_signal(struct dvb_frontend *fe, const char *buffer)
-{
- struct tea5767_priv *priv = fe->tuner_priv;
-
- int signal = ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8);
-
- tuner_dbg("Signal strength: %d\n", signal);
-
- return signal;
-}
-
-static inline int tea5767_stereo(struct dvb_frontend *fe, const char *buffer)
-{
- struct tea5767_priv *priv = fe->tuner_priv;
-
- int stereo = buffer[2] & TEA5767_STEREO_MASK;
-
- tuner_dbg("Radio ST GET = %02x\n", stereo);
-
- return (stereo ? V4L2_TUNER_SUB_STEREO : 0);
-}
-
-static int tea5767_get_status(struct dvb_frontend *fe, u32 *status)
-{
- unsigned char buffer[5];
-
- *status = 0;
-
- if (0 == tea5767_read_status(fe, buffer)) {
- if (tea5767_signal(fe, buffer))
- *status = TUNER_STATUS_LOCKED;
- if (tea5767_stereo(fe, buffer))
- *status |= TUNER_STATUS_STEREO;
- }
-
- return 0;
-}
-
-static int tea5767_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
-{
- unsigned char buffer[5];
-
- *strength = 0;
-
- if (0 == tea5767_read_status(fe, buffer))
- *strength = tea5767_signal(fe, buffer);
-
- return 0;
-}
-
-static int tea5767_standby(struct dvb_frontend *fe)
-{
- unsigned char buffer[5];
- struct tea5767_priv *priv = fe->tuner_priv;
- unsigned div, rc;
-
- div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */
- buffer[0] = (div >> 8) & 0x3f;
- buffer[1] = div & 0xff;
- buffer[2] = TEA5767_PORT1_HIGH;
- buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |
- TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY;
- buffer[4] = 0;
-
- if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))
- tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
-
- return 0;
-}
-
-int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr)
-{
- struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr };
- unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
- int rc;
-
- if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) {
- printk(KERN_WARNING "It is not a TEA5767. Received %i bytes.\n", rc);
- return -EINVAL;
- }
-
- /* If all bytes are the same then it's a TV tuner and not a tea5767 */
- if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
- buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
- printk(KERN_WARNING "All bytes are equal. It is not a TEA5767\n");
- return -EINVAL;
- }
-
- /* Status bytes:
- * Byte 4: bit 3:1 : CI (Chip Identification) == 0
- * bit 0 : internally set to 0
- * Byte 5: bit 7:0 : == 0
- */
- if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) {
- printk(KERN_WARNING "Chip ID is not zero. It is not a TEA5767\n");
- return -EINVAL;
- }
-
-
- return 0;
-}
-
-static int tea5767_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int tea5767_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct tea5767_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
-
- return 0;
-}
-
-static int tea5767_set_config (struct dvb_frontend *fe, void *priv_cfg)
-{
- struct tea5767_priv *priv = fe->tuner_priv;
-
- memcpy(&priv->ctrl, priv_cfg, sizeof(priv->ctrl));
-
- return 0;
-}
-
-static struct dvb_tuner_ops tea5767_tuner_ops = {
- .info = {
- .name = "tea5767", // Philips TEA5767HN FM Radio
- },
-
- .set_analog_params = set_radio_freq,
- .set_config = tea5767_set_config,
- .sleep = tea5767_standby,
- .release = tea5767_release,
- .get_frequency = tea5767_get_frequency,
- .get_status = tea5767_get_status,
- .get_rf_strength = tea5767_get_rf_strength,
-};
-
-struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr)
-{
- struct tea5767_priv *priv = NULL;
-
- priv = kzalloc(sizeof(struct tea5767_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
- fe->tuner_priv = priv;
-
- priv->i2c_props.addr = i2c_addr;
- priv->i2c_props.adap = i2c_adap;
- priv->i2c_props.name = "tea5767";
-
- priv->ctrl.xtal_freq = TEA5767_HIGH_LO_32768;
- priv->ctrl.port1 = 1;
- priv->ctrl.port2 = 1;
- priv->ctrl.high_cut = 1;
- priv->ctrl.st_noise = 1;
- priv->ctrl.japan_band = 1;
-
- memcpy(&fe->ops.tuner_ops, &tea5767_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- tuner_info("type set to %s\n", "Philips TEA5767HN FM Radio");
-
- return fe;
-}
-
-EXPORT_SYMBOL_GPL(tea5767_attach);
-EXPORT_SYMBOL_GPL(tea5767_autodetection);
-
-MODULE_DESCRIPTION("Philips TEA5767 FM tuner driver");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/tea5767.h b/drivers/media/common/tuners/tea5767.h
deleted file mode 100644
index d30ab1b..0000000
--- a/drivers/media/common/tuners/tea5767.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TEA5767_H__
-#define __TEA5767_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-enum tea5767_xtal {
- TEA5767_LOW_LO_32768 = 0,
- TEA5767_HIGH_LO_32768 = 1,
- TEA5767_LOW_LO_13MHz = 2,
- TEA5767_HIGH_LO_13MHz = 3,
-};
-
-struct tea5767_ctrl {
- unsigned int port1:1;
- unsigned int port2:1;
- unsigned int high_cut:1;
- unsigned int st_noise:1;
- unsigned int soft_mute:1;
- unsigned int japan_band:1;
- unsigned int deemph_75:1;
- unsigned int pllref:1;
- enum tea5767_xtal xtal_freq;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_TEA5767) || (defined(CONFIG_MEDIA_TUNER_TEA5767_MODULE) && defined(MODULE))
-extern int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr);
-
-extern struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr);
-#else
-static inline int tea5767_autodetection(struct i2c_adapter* i2c_adap,
- u8 i2c_addr)
-{
- printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
- __func__);
- return -EINVAL;
-}
-
-static inline struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
- struct i2c_adapter* i2c_adap,
- u8 i2c_addr)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif /* __TEA5767_H__ */
diff --git a/drivers/media/common/tuners/tua9001.c b/drivers/media/common/tuners/tua9001.c
deleted file mode 100644
index de26070..0000000
--- a/drivers/media/common/tuners/tua9001.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * Infineon TUA 9001 silicon tuner driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "tua9001.h"
-#include "tua9001_priv.h"
-
-/* write register */
-static int tua9001_wr_reg(struct tua9001_priv *priv, u8 reg, u16 val)
-{
- int ret;
- u8 buf[3] = { reg, (val >> 8) & 0xff, (val >> 0) & 0xff };
- struct i2c_msg msg[1] = {
- {
- .addr = priv->cfg->i2c_addr,
- .flags = 0,
- .len = sizeof(buf),
- .buf = buf,
- }
- };
-
- ret = i2c_transfer(priv->i2c, msg, 1);
- if (ret == 1) {
- ret = 0;
- } else {
- printk(KERN_WARNING "%s: I2C wr failed=%d reg=%02x\n",
- __func__, ret, reg);
- ret = -EREMOTEIO;
- }
-
- return ret;
-}
-
-static int tua9001_release(struct dvb_frontend *fe)
-{
- kfree(fe->tuner_priv);
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int tua9001_init(struct dvb_frontend *fe)
-{
- struct tua9001_priv *priv = fe->tuner_priv;
- int ret = 0;
- u8 i;
- struct reg_val data[] = {
- { 0x1e, 0x6512 },
- { 0x25, 0xb888 },
- { 0x39, 0x5460 },
- { 0x3b, 0x00c0 },
- { 0x3a, 0xf000 },
- { 0x08, 0x0000 },
- { 0x32, 0x0030 },
- { 0x41, 0x703a },
- { 0x40, 0x1c78 },
- { 0x2c, 0x1c00 },
- { 0x36, 0xc013 },
- { 0x37, 0x6f18 },
- { 0x27, 0x0008 },
- { 0x2a, 0x0001 },
- { 0x34, 0x0a40 },
- };
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c-gate */
-
- for (i = 0; i < ARRAY_SIZE(data); i++) {
- ret = tua9001_wr_reg(priv, data[i].reg, data[i].val);
- if (ret)
- break;
- }
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c-gate */
-
- if (ret < 0)
- pr_debug("%s: failed=%d\n", __func__, ret);
-
- return ret;
-}
-
-static int tua9001_set_params(struct dvb_frontend *fe)
-{
- struct tua9001_priv *priv = fe->tuner_priv;
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- int ret, i;
- u16 val;
- u32 frequency;
- struct reg_val data[2];
-
- pr_debug("%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n",
- __func__, c->delivery_system, c->frequency,
- c->bandwidth_hz);
-
- switch (c->delivery_system) {
- case SYS_DVBT:
- switch (c->bandwidth_hz) {
- case 8000000:
- val = 0x0000;
- break;
- case 7000000:
- val = 0x1000;
- break;
- case 6000000:
- val = 0x2000;
- break;
- case 5000000:
- val = 0x3000;
- break;
- default:
- ret = -EINVAL;
- goto err;
- }
- break;
- default:
- ret = -EINVAL;
- goto err;
- }
-
- data[0].reg = 0x04;
- data[0].val = val;
-
- frequency = (c->frequency - 150000000);
- frequency /= 100;
- frequency *= 48;
- frequency /= 10000;
-
- data[1].reg = 0x1f;
- data[1].val = frequency;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c-gate */
-
- for (i = 0; i < ARRAY_SIZE(data); i++) {
- ret = tua9001_wr_reg(priv, data[i].reg, data[i].val);
- if (ret < 0)
- break;
- }
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c-gate */
-
-err:
- if (ret < 0)
- pr_debug("%s: failed=%d\n", __func__, ret);
-
- return ret;
-}
-
-static int tua9001_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- *frequency = 0; /* Zero-IF */
-
- return 0;
-}
-
-static const struct dvb_tuner_ops tua9001_tuner_ops = {
- .info = {
- .name = "Infineon TUA 9001",
-
- .frequency_min = 170000000,
- .frequency_max = 862000000,
- .frequency_step = 0,
- },
-
- .release = tua9001_release,
-
- .init = tua9001_init,
- .set_params = tua9001_set_params,
-
- .get_if_frequency = tua9001_get_if_frequency,
-};
-
-struct dvb_frontend *tua9001_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tua9001_config *cfg)
-{
- struct tua9001_priv *priv = NULL;
-
- priv = kzalloc(sizeof(struct tua9001_priv), GFP_KERNEL);
- if (priv == NULL)
- return NULL;
-
- priv->cfg = cfg;
- priv->i2c = i2c;
-
- printk(KERN_INFO "Infineon TUA 9001 successfully attached.");
-
- memcpy(&fe->ops.tuner_ops, &tua9001_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- fe->tuner_priv = priv;
- return fe;
-}
-EXPORT_SYMBOL(tua9001_attach);
-
-MODULE_DESCRIPTION("Infineon TUA 9001 silicon tuner driver");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/tua9001.h b/drivers/media/common/tuners/tua9001.h
deleted file mode 100644
index 38d6ae7..0000000
--- a/drivers/media/common/tuners/tua9001.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Infineon TUA 9001 silicon tuner driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef TUA9001_H
-#define TUA9001_H
-
-#include "dvb_frontend.h"
-
-struct tua9001_config {
- /*
- * I2C address
- */
- u8 i2c_addr;
-};
-
-#if defined(CONFIG_MEDIA_TUNER_TUA9001) || \
- (defined(CONFIG_MEDIA_TUNER_TUA9001_MODULE) && defined(MODULE))
-extern struct dvb_frontend *tua9001_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tua9001_config *cfg);
-#else
-static inline struct dvb_frontend *tua9001_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, struct tua9001_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/common/tuners/tua9001_priv.h b/drivers/media/common/tuners/tua9001_priv.h
deleted file mode 100644
index 73cc1ce..0000000
--- a/drivers/media/common/tuners/tua9001_priv.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Infineon TUA 9001 silicon tuner driver
- *
- * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef TUA9001_PRIV_H
-#define TUA9001_PRIV_H
-
-struct reg_val {
- u8 reg;
- u16 val;
-};
-
-struct tua9001_priv {
- struct tua9001_config *cfg;
- struct i2c_adapter *i2c;
-};
-
-#endif
diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/common/tuners/tuner-i2c.h
deleted file mode 100644
index 18f0056..0000000
--- a/drivers/media/common/tuners/tuner-i2c.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- tuner-i2c.h - i2c interface for different tuners
-
- Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TUNER_I2C_H__
-#define __TUNER_I2C_H__
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-struct tuner_i2c_props {
- u8 addr;
- struct i2c_adapter *adap;
-
- /* used for tuner instance management */
- int count;
- char *name;
-};
-
-static inline int tuner_i2c_xfer_send(struct tuner_i2c_props *props, char *buf, int len)
-{
- struct i2c_msg msg = { .addr = props->addr, .flags = 0,
- .buf = buf, .len = len };
- int ret = i2c_transfer(props->adap, &msg, 1);
-
- return (ret == 1) ? len : ret;
-}
-
-static inline int tuner_i2c_xfer_recv(struct tuner_i2c_props *props, char *buf, int len)
-{
- struct i2c_msg msg = { .addr = props->addr, .flags = I2C_M_RD,
- .buf = buf, .len = len };
- int ret = i2c_transfer(props->adap, &msg, 1);
-
- return (ret == 1) ? len : ret;
-}
-
-static inline int tuner_i2c_xfer_send_recv(struct tuner_i2c_props *props,
- char *obuf, int olen,
- char *ibuf, int ilen)
-{
- struct i2c_msg msg[2] = { { .addr = props->addr, .flags = 0,
- .buf = obuf, .len = olen },
- { .addr = props->addr, .flags = I2C_M_RD,
- .buf = ibuf, .len = ilen } };
- int ret = i2c_transfer(props->adap, msg, 2);
-
- return (ret == 2) ? ilen : ret;
-}
-
-/* Callers must declare as a global for the module:
- *
- * static LIST_HEAD(hybrid_tuner_instance_list);
- *
- * hybrid_tuner_instance_list should be the third argument
- * passed into hybrid_tuner_request_state().
- *
- * state structure must contain the following:
- *
- * struct list_head hybrid_tuner_instance_list;
- * struct tuner_i2c_props i2c_props;
- *
- * hybrid_tuner_instance_list (both within state structure and globally)
- * is only required if the driver is using hybrid_tuner_request_state
- * and hybrid_tuner_release_state to manage state sharing between
- * multiple instances of hybrid tuners.
- */
-
-#define tuner_printk(kernlvl, i2cprops, fmt, arg...) do { \
- printk(kernlvl "%s %d-%04x: " fmt, i2cprops.name, \
- i2cprops.adap ? \
- i2c_adapter_id(i2cprops.adap) : -1, \
- i2cprops.addr, ##arg); \
- } while (0)
-
-/* TO DO: convert all callers of these macros to pass in
- * struct tuner_i2c_props, then remove the macro wrappers */
-
-#define __tuner_warn(i2cprops, fmt, arg...) do { \
- tuner_printk(KERN_WARNING, i2cprops, fmt, ##arg); \
- } while (0)
-
-#define __tuner_info(i2cprops, fmt, arg...) do { \
- tuner_printk(KERN_INFO, i2cprops, fmt, ##arg); \
- } while (0)
-
-#define __tuner_err(i2cprops, fmt, arg...) do { \
- tuner_printk(KERN_ERR, i2cprops, fmt, ##arg); \
- } while (0)
-
-#define __tuner_dbg(i2cprops, fmt, arg...) do { \
- if ((debug)) \
- tuner_printk(KERN_DEBUG, i2cprops, fmt, ##arg); \
- } while (0)
-
-#define tuner_warn(fmt, arg...) __tuner_warn(priv->i2c_props, fmt, ##arg)
-#define tuner_info(fmt, arg...) __tuner_info(priv->i2c_props, fmt, ##arg)
-#define tuner_err(fmt, arg...) __tuner_err(priv->i2c_props, fmt, ##arg)
-#define tuner_dbg(fmt, arg...) __tuner_dbg(priv->i2c_props, fmt, ##arg)
-
-/****************************************************************************/
-
-/* The return value of hybrid_tuner_request_state indicates the number of
- * instances using this tuner object.
- *
- * 0 - no instances, indicates an error - kzalloc must have failed
- *
- * 1 - one instance, indicates that the tuner object was created successfully
- *
- * 2 (or more) instances, indicates that an existing tuner object was found
- */
-
-#define hybrid_tuner_request_state(type, state, list, i2cadap, i2caddr, devname)\
-({ \
- int __ret = 0; \
- list_for_each_entry(state, &list, hybrid_tuner_instance_list) { \
- if (((i2cadap) && (state->i2c_props.adap)) && \
- ((i2c_adapter_id(state->i2c_props.adap) == \
- i2c_adapter_id(i2cadap)) && \
- (i2caddr == state->i2c_props.addr))) { \
- __tuner_info(state->i2c_props, \
- "attaching existing instance\n"); \
- state->i2c_props.count++; \
- __ret = state->i2c_props.count; \
- break; \
- } \
- } \
- if (0 == __ret) { \
- state = kzalloc(sizeof(type), GFP_KERNEL); \
- if (NULL == state) \
- goto __fail; \
- state->i2c_props.addr = i2caddr; \
- state->i2c_props.adap = i2cadap; \
- state->i2c_props.name = devname; \
- __tuner_info(state->i2c_props, \
- "creating new instance\n"); \
- list_add_tail(&state->hybrid_tuner_instance_list, &list);\
- state->i2c_props.count++; \
- __ret = state->i2c_props.count; \
- } \
-__fail: \
- __ret; \
-})
-
-#define hybrid_tuner_release_state(state) \
-({ \
- int __ret; \
- state->i2c_props.count--; \
- __ret = state->i2c_props.count; \
- if (!state->i2c_props.count) { \
- __tuner_info(state->i2c_props, "destroying instance\n");\
- list_del(&state->hybrid_tuner_instance_list); \
- kfree(state); \
- } \
- __ret; \
-})
-
-#define hybrid_tuner_report_instance_count(state) \
-({ \
- int __ret = 0; \
- if (state) \
- __ret = state->i2c_props.count; \
- __ret; \
-})
-
-#endif /* __TUNER_I2C_H__ */
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
deleted file mode 100644
index 39e7e58..0000000
--- a/drivers/media/common/tuners/tuner-simple.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- * i2c tv tuner chip device driver
- * controls all those simple 4-control-bytes style tuners.
- *
- * This "tuner-simple" module was split apart from the original "tuner" module.
- */
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/tuner.h>
-#include <media/v4l2-common.h>
-#include <media/tuner-types.h>
-#include "tuner-i2c.h"
-#include "tuner-simple.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-#define TUNER_SIMPLE_MAX 64
-static unsigned int simple_devcount;
-
-static int offset;
-module_param(offset, int, 0664);
-MODULE_PARM_DESC(offset, "Allows to specify an offset for tuner");
-
-static unsigned int atv_input[TUNER_SIMPLE_MAX] = \
- { [0 ... (TUNER_SIMPLE_MAX-1)] = 0 };
-static unsigned int dtv_input[TUNER_SIMPLE_MAX] = \
- { [0 ... (TUNER_SIMPLE_MAX-1)] = 0 };
-module_param_array(atv_input, int, NULL, 0644);
-module_param_array(dtv_input, int, NULL, 0644);
-MODULE_PARM_DESC(atv_input, "specify atv rf input, 0 for autoselect");
-MODULE_PARM_DESC(dtv_input, "specify dtv rf input, 0 for autoselect");
-
-/* ---------------------------------------------------------------------- */
-
-/* tv standard selection for Temic 4046 FM5
- this value takes the low bits of control byte 2
- from datasheet Rev.01, Feb.00
- standard BG I L L2 D
- picture IF 38.9 38.9 38.9 33.95 38.9
- sound 1 33.4 32.9 32.4 40.45 32.4
- sound 2 33.16
- NICAM 33.05 32.348 33.05 33.05
- */
-#define TEMIC_SET_PAL_I 0x05
-#define TEMIC_SET_PAL_DK 0x09
-#define TEMIC_SET_PAL_L 0x0a /* SECAM ? */
-#define TEMIC_SET_PAL_L2 0x0b /* change IF ! */
-#define TEMIC_SET_PAL_BG 0x0c
-
-/* tv tuner system standard selection for Philips FQ1216ME
- this value takes the low bits of control byte 2
- from datasheet "1999 Nov 16" (supersedes "1999 Mar 23")
- standard BG DK I L L`
- picture carrier 38.90 38.90 38.90 38.90 33.95
- colour 34.47 34.47 34.47 34.47 38.38
- sound 1 33.40 32.40 32.90 32.40 40.45
- sound 2 33.16 - - - -
- NICAM 33.05 33.05 32.35 33.05 39.80
- */
-#define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/
-#define PHILIPS_SET_PAL_BGDK 0x09
-#define PHILIPS_SET_PAL_L2 0x0a
-#define PHILIPS_SET_PAL_L 0x0b
-
-/* system switching for Philips FI1216MF MK2
- from datasheet "1996 Jul 09",
- standard BG L L'
- picture carrier 38.90 38.90 33.95
- colour 34.47 34.37 38.38
- sound 1 33.40 32.40 40.45
- sound 2 33.16 - -
- NICAM 33.05 33.05 39.80
- */
-#define PHILIPS_MF_SET_STD_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */
-#define PHILIPS_MF_SET_STD_L 0x03 /* Used on Secam France */
-#define PHILIPS_MF_SET_STD_LC 0x02 /* Used on SECAM L' */
-
-/* Control byte */
-
-#define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */
-#define TUNER_RATIO_SELECT_50 0x00
-#define TUNER_RATIO_SELECT_32 0x02
-#define TUNER_RATIO_SELECT_166 0x04
-#define TUNER_RATIO_SELECT_62 0x06
-
-#define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */
-
-/* Status byte */
-
-#define TUNER_POR 0x80
-#define TUNER_FL 0x40
-#define TUNER_MODE 0x38
-#define TUNER_AFC 0x07
-#define TUNER_SIGNAL 0x07
-#define TUNER_STEREO 0x10
-
-#define TUNER_PLL_LOCKED 0x40
-#define TUNER_STEREO_MK3 0x04
-
-static DEFINE_MUTEX(tuner_simple_list_mutex);
-static LIST_HEAD(hybrid_tuner_instance_list);
-
-struct tuner_simple_priv {
- unsigned int nr;
- u16 last_div;
-
- struct tuner_i2c_props i2c_props;
- struct list_head hybrid_tuner_instance_list;
-
- unsigned int type;
- struct tunertype *tun;
-
- u32 frequency;
- u32 bandwidth;
-};
-
-/* ---------------------------------------------------------------------- */
-
-static int tuner_read_status(struct dvb_frontend *fe)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- unsigned char byte;
-
- if (1 != tuner_i2c_xfer_recv(&priv->i2c_props, &byte, 1))
- return 0;
-
- return byte;
-}
-
-static inline int tuner_signal(const int status)
-{
- return (status & TUNER_SIGNAL) << 13;
-}
-
-static inline int tuner_stereo(const int type, const int status)
-{
- switch (type) {
- case TUNER_PHILIPS_FM1216ME_MK3:
- case TUNER_PHILIPS_FM1236_MK3:
- case TUNER_PHILIPS_FM1256_IH3:
- case TUNER_LG_NTSC_TAPE:
- case TUNER_TCL_MF02GIP_5N:
- return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
- case TUNER_PHILIPS_FM1216MK5:
- return status | TUNER_STEREO;
- default:
- return status & TUNER_STEREO;
- }
-}
-
-static inline int tuner_islocked(const int status)
-{
- return (status & TUNER_FL);
-}
-
-static inline int tuner_afcstatus(const int status)
-{
- return (status & TUNER_AFC) - 2;
-}
-
-
-static int simple_get_status(struct dvb_frontend *fe, u32 *status)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- int tuner_status;
-
- if (priv->i2c_props.adap == NULL)
- return -EINVAL;
-
- tuner_status = tuner_read_status(fe);
-
- *status = 0;
-
- if (tuner_islocked(tuner_status))
- *status = TUNER_STATUS_LOCKED;
- if (tuner_stereo(priv->type, tuner_status))
- *status |= TUNER_STATUS_STEREO;
-
- tuner_dbg("AFC Status: %d\n", tuner_afcstatus(tuner_status));
-
- return 0;
-}
-
-static int simple_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- int signal;
-
- if (priv->i2c_props.adap == NULL)
- return -EINVAL;
-
- signal = tuner_signal(tuner_read_status(fe));
-
- *strength = signal;
-
- tuner_dbg("Signal strength: %d\n", signal);
-
- return 0;
-}
-
-/* ---------------------------------------------------------------------- */
-
-static inline char *tuner_param_name(enum param_type type)
-{
- char *name;
-
- switch (type) {
- case TUNER_PARAM_TYPE_RADIO:
- name = "radio";
- break;
- case TUNER_PARAM_TYPE_PAL:
- name = "pal";
- break;
- case TUNER_PARAM_TYPE_SECAM:
- name = "secam";
- break;
- case TUNER_PARAM_TYPE_NTSC:
- name = "ntsc";
- break;
- case TUNER_PARAM_TYPE_DIGITAL:
- name = "digital";
- break;
- default:
- name = "unknown";
- break;
- }
- return name;
-}
-
-static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe,
- enum param_type desired_type)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- struct tunertype *tun = priv->tun;
- int i;
-
- for (i = 0; i < tun->count; i++)
- if (desired_type == tun->params[i].type)
- break;
-
- /* use default tuner params if desired_type not available */
- if (i == tun->count) {
- tuner_dbg("desired params (%s) undefined for tuner %d\n",
- tuner_param_name(desired_type), priv->type);
- i = 0;
- }
-
- tuner_dbg("using tuner params #%d (%s)\n", i,
- tuner_param_name(tun->params[i].type));
-
- return &tun->params[i];
-}
-
-static int simple_config_lookup(struct dvb_frontend *fe,
- struct tuner_params *t_params,
- unsigned *frequency, u8 *config, u8 *cb)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- int i;
-
- for (i = 0; i < t_params->count; i++) {
- if (*frequency > t_params->ranges[i].limit)
- continue;
- break;
- }
- if (i == t_params->count) {
- tuner_dbg("frequency out of range (%d > %d)\n",
- *frequency, t_params->ranges[i - 1].limit);
- *frequency = t_params->ranges[--i].limit;
- }
- *config = t_params->ranges[i].config;
- *cb = t_params->ranges[i].cb;
-
- tuner_dbg("freq = %d.%02d (%d), range = %d, "
- "config = 0x%02x, cb = 0x%02x\n",
- *frequency / 16, *frequency % 16 * 100 / 16, *frequency,
- i, *config, *cb);
-
- return i;
-}
-
-/* ---------------------------------------------------------------------- */
-
-static void simple_set_rf_input(struct dvb_frontend *fe,
- u8 *config, u8 *cb, unsigned int rf)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
-
- switch (priv->type) {
- case TUNER_PHILIPS_TUV1236D:
- switch (rf) {
- case 1:
- *cb |= 0x08;
- break;
- default:
- *cb &= ~0x08;
- break;
- }
- break;
- case TUNER_PHILIPS_FCV1236D:
- switch (rf) {
- case 1:
- *cb |= 0x01;
- break;
- default:
- *cb &= ~0x01;
- break;
- }
- break;
- default:
- break;
- }
-}
-
-static int simple_std_setup(struct dvb_frontend *fe,
- struct analog_parameters *params,
- u8 *config, u8 *cb)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- int rc;
-
- /* tv norm specific stuff for multi-norm tuners */
- switch (priv->type) {
- case TUNER_PHILIPS_SECAM: /* FI1216MF */
- /* 0x01 -> ??? no change ??? */
- /* 0x02 -> PAL BDGHI / SECAM L */
- /* 0x04 -> ??? PAL others / SECAM others ??? */
- *cb &= ~0x03;
- if (params->std & V4L2_STD_SECAM_L)
- /* also valid for V4L2_STD_SECAM */
- *cb |= PHILIPS_MF_SET_STD_L;
- else if (params->std & V4L2_STD_SECAM_LC)
- *cb |= PHILIPS_MF_SET_STD_LC;
- else /* V4L2_STD_B|V4L2_STD_GH */
- *cb |= PHILIPS_MF_SET_STD_BG;
- break;
-
- case TUNER_TEMIC_4046FM5:
- *cb &= ~0x0f;
-
- if (params->std & V4L2_STD_PAL_BG) {
- *cb |= TEMIC_SET_PAL_BG;
-
- } else if (params->std & V4L2_STD_PAL_I) {
- *cb |= TEMIC_SET_PAL_I;
-
- } else if (params->std & V4L2_STD_PAL_DK) {
- *cb |= TEMIC_SET_PAL_DK;
-
- } else if (params->std & V4L2_STD_SECAM_L) {
- *cb |= TEMIC_SET_PAL_L;
-
- }
- break;
-
- case TUNER_PHILIPS_FQ1216ME:
- *cb &= ~0x0f;
-
- if (params->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) {
- *cb |= PHILIPS_SET_PAL_BGDK;
-
- } else if (params->std & V4L2_STD_PAL_I) {
- *cb |= PHILIPS_SET_PAL_I;
-
- } else if (params->std & V4L2_STD_SECAM_L) {
- *cb |= PHILIPS_SET_PAL_L;
-
- }
- break;
-
- case TUNER_PHILIPS_FCV1236D:
- /* 0x00 -> ATSC antenna input 1 */
- /* 0x01 -> ATSC antenna input 2 */
- /* 0x02 -> NTSC antenna input 1 */
- /* 0x03 -> NTSC antenna input 2 */
- *cb &= ~0x03;
- if (!(params->std & V4L2_STD_ATSC))
- *cb |= 2;
- break;
-
- case TUNER_MICROTUNE_4042FI5:
- /* Set the charge pump for fast tuning */
- *config |= TUNER_CHARGE_PUMP;
- break;
-
- case TUNER_PHILIPS_TUV1236D:
- {
- struct tuner_i2c_props i2c = priv->i2c_props;
- /* 0x40 -> ATSC antenna input 1 */
- /* 0x48 -> ATSC antenna input 2 */
- /* 0x00 -> NTSC antenna input 1 */
- /* 0x08 -> NTSC antenna input 2 */
- u8 buffer[4] = { 0x14, 0x00, 0x17, 0x00};
- *cb &= ~0x40;
- if (params->std & V4L2_STD_ATSC) {
- *cb |= 0x40;
- buffer[1] = 0x04;
- }
- /* set to the correct mode (analog or digital) */
- i2c.addr = 0x0a;
- rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
- if (2 != rc)
- tuner_warn("i2c i/o error: rc == %d "
- "(should be 2)\n", rc);
- rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
- if (2 != rc)
- tuner_warn("i2c i/o error: rc == %d "
- "(should be 2)\n", rc);
- break;
- }
- }
- if (atv_input[priv->nr])
- simple_set_rf_input(fe, config, cb, atv_input[priv->nr]);
-
- return 0;
-}
-
-static int simple_set_aux_byte(struct dvb_frontend *fe, u8 config, u8 aux)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- int rc;
- u8 buffer[2];
-
- buffer[0] = (config & ~0x38) | 0x18;
- buffer[1] = aux;
-
- tuner_dbg("setting aux byte: 0x%02x 0x%02x\n", buffer[0], buffer[1]);
-
- rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2);
- if (2 != rc)
- tuner_warn("i2c i/o error: rc == %d (should be 2)\n", rc);
-
- return rc == 2 ? 0 : rc;
-}
-
-static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
- u16 div, u8 config, u8 cb)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- int rc;
-
- switch (priv->type) {
- case TUNER_LG_TDVS_H06XF:
- simple_set_aux_byte(fe, config, 0x20);
- break;
- case TUNER_PHILIPS_FQ1216LME_MK3:
- simple_set_aux_byte(fe, config, 0x60); /* External AGC */
- break;
- case TUNER_MICROTUNE_4042FI5:
- {
- /* FIXME - this may also work for other tuners */
- unsigned long timeout = jiffies + msecs_to_jiffies(1);
- u8 status_byte = 0;
-
- /* Wait until the PLL locks */
- for (;;) {
- if (time_after(jiffies, timeout))
- return 0;
- rc = tuner_i2c_xfer_recv(&priv->i2c_props,
- &status_byte, 1);
- if (1 != rc) {
- tuner_warn("i2c i/o read error: rc == %d "
- "(should be 1)\n", rc);
- break;
- }
- if (status_byte & TUNER_PLL_LOCKED)
- break;
- udelay(10);
- }
-
- /* Set the charge pump for optimized phase noise figure */
- config &= ~TUNER_CHARGE_PUMP;
- buffer[0] = (div>>8) & 0x7f;
- buffer[1] = div & 0xff;
- buffer[2] = config;
- buffer[3] = cb;
- tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
- buffer[0], buffer[1], buffer[2], buffer[3]);
-
- rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
- if (4 != rc)
- tuner_warn("i2c i/o error: rc == %d "
- "(should be 4)\n", rc);
- break;
- }
- }
-
- return 0;
-}
-
-static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
-
- switch (priv->type) {
- case TUNER_TENA_9533_DI:
- case TUNER_YMEC_TVF_5533MF:
- tuner_dbg("This tuner doesn't have FM. "
- "Most cards have a TEA5767 for FM\n");
- return 0;
- case TUNER_PHILIPS_FM1216ME_MK3:
- case TUNER_PHILIPS_FM1236_MK3:
- case TUNER_PHILIPS_FMD1216ME_MK3:
- case TUNER_PHILIPS_FMD1216MEX_MK3:
- case TUNER_LG_NTSC_TAPE:
- case TUNER_PHILIPS_FM1256_IH3:
- case TUNER_TCL_MF02GIP_5N:
- buffer[3] = 0x19;
- break;
- case TUNER_PHILIPS_FM1216MK5:
- buffer[2] = 0x88;
- buffer[3] = 0x09;
- break;
- case TUNER_TNF_5335MF:
- buffer[3] = 0x11;
- break;
- case TUNER_LG_PAL_FM:
- buffer[3] = 0xa5;
- break;
- case TUNER_THOMSON_DTT761X:
- buffer[3] = 0x39;
- break;
- case TUNER_PHILIPS_FQ1216LME_MK3:
- case TUNER_PHILIPS_FQ1236_MK5:
- tuner_err("This tuner doesn't have FM\n");
- /* Set the low band for sanity, since it covers 88-108 MHz */
- buffer[3] = 0x01;
- break;
- case TUNER_MICROTUNE_4049FM5:
- default:
- buffer[3] = 0xa4;
- break;
- }
-
- return 0;
-}
-
-/* ---------------------------------------------------------------------- */
-
-static int simple_set_tv_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- u8 config, cb;
- u16 div;
- u8 buffer[4];
- int rc, IFPCoff, i;
- enum param_type desired_type;
- struct tuner_params *t_params;
-
- /* IFPCoff = Video Intermediate Frequency - Vif:
- 940 =16*58.75 NTSC/J (Japan)
- 732 =16*45.75 M/N STD
- 704 =16*44 ATSC (at DVB code)
- 632 =16*39.50 I U.K.
- 622.4=16*38.90 B/G D/K I, L STD
- 592 =16*37.00 D China
- 590 =16.36.875 B Australia
- 543.2=16*33.95 L' STD
- 171.2=16*10.70 FM Radio (at set_radio_freq)
- */
-
- if (params->std == V4L2_STD_NTSC_M_JP) {
- IFPCoff = 940;
- desired_type = TUNER_PARAM_TYPE_NTSC;
- } else if ((params->std & V4L2_STD_MN) &&
- !(params->std & ~V4L2_STD_MN)) {
- IFPCoff = 732;
- desired_type = TUNER_PARAM_TYPE_NTSC;
- } else if (params->std == V4L2_STD_SECAM_LC) {
- IFPCoff = 543;
- desired_type = TUNER_PARAM_TYPE_SECAM;
- } else {
- IFPCoff = 623;
- desired_type = TUNER_PARAM_TYPE_PAL;
- }
-
- t_params = simple_tuner_params(fe, desired_type);
-
- i = simple_config_lookup(fe, t_params, ¶ms->frequency,
- &config, &cb);
-
- div = params->frequency + IFPCoff + offset;
-
- tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, "
- "Offset=%d.%02d MHz, div=%0d\n",
- params->frequency / 16, params->frequency % 16 * 100 / 16,
- IFPCoff / 16, IFPCoff % 16 * 100 / 16,
- offset / 16, offset % 16 * 100 / 16, div);
-
- /* tv norm specific stuff for multi-norm tuners */
- simple_std_setup(fe, params, &config, &cb);
-
- if (t_params->cb_first_if_lower_freq && div < priv->last_div) {
- buffer[0] = config;
- buffer[1] = cb;
- buffer[2] = (div>>8) & 0x7f;
- buffer[3] = div & 0xff;
- } else {
- buffer[0] = (div>>8) & 0x7f;
- buffer[1] = div & 0xff;
- buffer[2] = config;
- buffer[3] = cb;
- }
- priv->last_div = div;
- if (t_params->has_tda9887) {
- struct v4l2_priv_tun_config tda9887_cfg;
- int tda_config = 0;
- int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
- V4L2_STD_SECAM_LC)) &&
- !(params->std & ~(V4L2_STD_SECAM_L |
- V4L2_STD_SECAM_LC));
-
- tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &tda_config;
-
- if (params->std == V4L2_STD_SECAM_LC) {
- if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
- tda_config |= TDA9887_PORT1_ACTIVE;
- if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
- tda_config |= TDA9887_PORT2_ACTIVE;
- } else {
- if (t_params->port1_active)
- tda_config |= TDA9887_PORT1_ACTIVE;
- if (t_params->port2_active)
- tda_config |= TDA9887_PORT2_ACTIVE;
- }
- if (t_params->intercarrier_mode)
- tda_config |= TDA9887_INTERCARRIER;
- if (is_secam_l) {
- if (i == 0 && t_params->default_top_secam_low)
- tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
- else if (i == 1 && t_params->default_top_secam_mid)
- tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
- else if (t_params->default_top_secam_high)
- tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
- } else {
- if (i == 0 && t_params->default_top_low)
- tda_config |= TDA9887_TOP(t_params->default_top_low);
- else if (i == 1 && t_params->default_top_mid)
- tda_config |= TDA9887_TOP(t_params->default_top_mid);
- else if (t_params->default_top_high)
- tda_config |= TDA9887_TOP(t_params->default_top_high);
- }
- if (t_params->default_pll_gating_18)
- tda_config |= TDA9887_GATING_18;
- i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
- &tda9887_cfg);
- }
- tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
- buffer[0], buffer[1], buffer[2], buffer[3]);
-
- rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
- if (4 != rc)
- tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
-
- simple_post_tune(fe, &buffer[0], div, config, cb);
-
- return 0;
-}
-
-static int simple_set_radio_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tunertype *tun;
- struct tuner_simple_priv *priv = fe->tuner_priv;
- u8 buffer[4];
- u16 div;
- int rc, j;
- struct tuner_params *t_params;
- unsigned int freq = params->frequency;
-
- tun = priv->tun;
-
- for (j = tun->count-1; j > 0; j--)
- if (tun->params[j].type == TUNER_PARAM_TYPE_RADIO)
- break;
- /* default t_params (j=0) will be used if desired type wasn't found */
- t_params = &tun->params[j];
-
- /* Select Radio 1st IF used */
- switch (t_params->radio_if) {
- case 0: /* 10.7 MHz */
- freq += (unsigned int)(10.7*16000);
- break;
- case 1: /* 33.3 MHz */
- freq += (unsigned int)(33.3*16000);
- break;
- case 2: /* 41.3 MHz */
- freq += (unsigned int)(41.3*16000);
- break;
- default:
- tuner_warn("Unsupported radio_if value %d\n",
- t_params->radio_if);
- return 0;
- }
-
- buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) |
- TUNER_RATIO_SELECT_50; /* 50 kHz step */
-
- /* Bandswitch byte */
- simple_radio_bandswitch(fe, &buffer[0]);
-
- /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
- freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
- freq * (1/800) */
- div = (freq + 400) / 800;
-
- if (t_params->cb_first_if_lower_freq && div < priv->last_div) {
- buffer[0] = buffer[2];
- buffer[1] = buffer[3];
- buffer[2] = (div>>8) & 0x7f;
- buffer[3] = div & 0xff;
- } else {
- buffer[0] = (div>>8) & 0x7f;
- buffer[1] = div & 0xff;
- }
-
- tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
- buffer[0], buffer[1], buffer[2], buffer[3]);
- priv->last_div = div;
-
- if (t_params->has_tda9887) {
- int config = 0;
- struct v4l2_priv_tun_config tda9887_cfg;
-
- tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &config;
-
- if (t_params->port1_active &&
- !t_params->port1_fm_high_sensitivity)
- config |= TDA9887_PORT1_ACTIVE;
- if (t_params->port2_active &&
- !t_params->port2_fm_high_sensitivity)
- config |= TDA9887_PORT2_ACTIVE;
- if (t_params->intercarrier_mode)
- config |= TDA9887_INTERCARRIER;
-/* if (t_params->port1_set_for_fm_mono)
- config &= ~TDA9887_PORT1_ACTIVE;*/
- if (t_params->fm_gain_normal)
- config |= TDA9887_GAIN_NORMAL;
- if (t_params->radio_if == 2)
- config |= TDA9887_RIF_41_3;
- i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
- &tda9887_cfg);
- }
- rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
- if (4 != rc)
- tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
-
- /* Write AUX byte */
- switch (priv->type) {
- case TUNER_PHILIPS_FM1216ME_MK3:
- buffer[2] = 0x98;
- buffer[3] = 0x20; /* set TOP AGC */
- rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
- if (4 != rc)
- tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
- break;
- }
-
- return 0;
-}
-
-static int simple_set_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- int ret = -EINVAL;
-
- if (priv->i2c_props.adap == NULL)
- return -EINVAL;
-
- switch (params->mode) {
- case V4L2_TUNER_RADIO:
- ret = simple_set_radio_freq(fe, params);
- priv->frequency = params->frequency * 125 / 2;
- break;
- case V4L2_TUNER_ANALOG_TV:
- case V4L2_TUNER_DIGITAL_TV:
- ret = simple_set_tv_freq(fe, params);
- priv->frequency = params->frequency * 62500;
- break;
- }
- priv->bandwidth = 0;
-
- return ret;
-}
-
-static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf,
- const u32 delsys,
- const u32 frequency,
- const u32 bandwidth)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
-
- switch (priv->type) {
- case TUNER_PHILIPS_FMD1216ME_MK3:
- case TUNER_PHILIPS_FMD1216MEX_MK3:
- if (bandwidth == 8000000 &&
- frequency >= 158870000)
- buf[3] |= 0x08;
- break;
- case TUNER_PHILIPS_TD1316:
- /* determine band */
- buf[3] |= (frequency < 161000000) ? 1 :
- (frequency < 444000000) ? 2 : 4;
-
- /* setup PLL filter */
- if (bandwidth == 8000000)
- buf[3] |= 1 << 3;
- break;
- case TUNER_PHILIPS_TUV1236D:
- case TUNER_PHILIPS_FCV1236D:
- {
- unsigned int new_rf;
-
- if (dtv_input[priv->nr])
- new_rf = dtv_input[priv->nr];
- else
- switch (delsys) {
- case SYS_DVBC_ANNEX_B:
- new_rf = 1;
- break;
- case SYS_ATSC:
- default:
- new_rf = 0;
- break;
- }
- simple_set_rf_input(fe, &buf[2], &buf[3], new_rf);
- break;
- }
- default:
- break;
- }
-}
-
-static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf,
- const u32 delsys,
- const u32 freq,
- const u32 bw)
-{
- /* This function returns the tuned frequency on success, 0 on error */
- struct tuner_simple_priv *priv = fe->tuner_priv;
- struct tunertype *tun = priv->tun;
- static struct tuner_params *t_params;
- u8 config, cb;
- u32 div;
- int ret;
- u32 frequency = freq / 62500;
-
- if (!tun->stepsize) {
- /* tuner-core was loaded before the digital tuner was
- * configured and somehow picked the wrong tuner type */
- tuner_err("attempt to treat tuner %d (%s) as digital tuner "
- "without stepsize defined.\n",
- priv->type, priv->tun->name);
- return 0; /* failure */
- }
-
- t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
- ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
- if (ret < 0)
- return 0; /* failure */
-
- div = ((frequency + t_params->iffreq) * 62500 + offset +
- tun->stepsize/2) / tun->stepsize;
-
- buf[0] = div >> 8;
- buf[1] = div & 0xff;
- buf[2] = config;
- buf[3] = cb;
-
- simple_set_dvb(fe, buf, delsys, freq, bw);
-
- tuner_dbg("%s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n",
- tun->name, div, buf[0], buf[1], buf[2], buf[3]);
-
- /* calculate the frequency we set it to */
- return (div * tun->stepsize) - t_params->iffreq;
-}
-
-static int simple_dvb_calc_regs(struct dvb_frontend *fe,
- u8 *buf, int buf_len)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 delsys = c->delivery_system;
- u32 bw = c->bandwidth_hz;
- struct tuner_simple_priv *priv = fe->tuner_priv;
- u32 frequency;
-
- if (buf_len < 5)
- return -EINVAL;
-
- frequency = simple_dvb_configure(fe, buf+1, delsys, c->frequency, bw);
- if (frequency == 0)
- return -EINVAL;
-
- buf[0] = priv->i2c_props.addr;
-
- priv->frequency = frequency;
- priv->bandwidth = c->bandwidth_hz;
-
- return 5;
-}
-
-static int simple_dvb_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 delsys = c->delivery_system;
- u32 bw = c->bandwidth_hz;
- u32 freq = c->frequency;
- struct tuner_simple_priv *priv = fe->tuner_priv;
- u32 frequency;
- u32 prev_freq, prev_bw;
- int ret;
- u8 buf[5];
-
- if (priv->i2c_props.adap == NULL)
- return -EINVAL;
-
- prev_freq = priv->frequency;
- prev_bw = priv->bandwidth;
-
- frequency = simple_dvb_configure(fe, buf+1, delsys, freq, bw);
- if (frequency == 0)
- return -EINVAL;
-
- buf[0] = priv->i2c_props.addr;
-
- priv->frequency = frequency;
- priv->bandwidth = bw;
-
- /* put analog demod in standby when tuning digital */
- if (fe->ops.analog_ops.standby)
- fe->ops.analog_ops.standby(fe);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- /* buf[0] contains the i2c address, but *
- * we already have it in i2c_props.addr */
- ret = tuner_i2c_xfer_send(&priv->i2c_props, buf+1, 4);
- if (ret != 4)
- goto fail;
-
- return 0;
-fail:
- /* calc_regs sets frequency and bandwidth. if we failed, unset them */
- priv->frequency = prev_freq;
- priv->bandwidth = prev_bw;
-
- return ret;
-}
-
-static int simple_init(struct dvb_frontend *fe)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
-
- if (priv->i2c_props.adap == NULL)
- return -EINVAL;
-
- if (priv->tun->initdata) {
- int ret;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- ret = tuner_i2c_xfer_send(&priv->i2c_props,
- priv->tun->initdata + 1,
- priv->tun->initdata[0]);
- if (ret != priv->tun->initdata[0])
- return ret;
- }
-
- return 0;
-}
-
-static int simple_sleep(struct dvb_frontend *fe)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
-
- if (priv->i2c_props.adap == NULL)
- return -EINVAL;
-
- if (priv->tun->sleepdata) {
- int ret;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- ret = tuner_i2c_xfer_send(&priv->i2c_props,
- priv->tun->sleepdata + 1,
- priv->tun->sleepdata[0]);
- if (ret != priv->tun->sleepdata[0])
- return ret;
- }
-
- return 0;
-}
-
-static int simple_release(struct dvb_frontend *fe)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
-
- mutex_lock(&tuner_simple_list_mutex);
-
- if (priv)
- hybrid_tuner_release_state(priv);
-
- mutex_unlock(&tuner_simple_list_mutex);
-
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int simple_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- *frequency = priv->frequency;
- return 0;
-}
-
-static int simple_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
-{
- struct tuner_simple_priv *priv = fe->tuner_priv;
- *bandwidth = priv->bandwidth;
- return 0;
-}
-
-static struct dvb_tuner_ops simple_tuner_ops = {
- .init = simple_init,
- .sleep = simple_sleep,
- .set_analog_params = simple_set_params,
- .set_params = simple_dvb_set_params,
- .calc_regs = simple_dvb_calc_regs,
- .release = simple_release,
- .get_frequency = simple_get_frequency,
- .get_bandwidth = simple_get_bandwidth,
- .get_status = simple_get_status,
- .get_rf_strength = simple_get_rf_strength,
-};
-
-struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap,
- u8 i2c_addr,
- unsigned int type)
-{
- struct tuner_simple_priv *priv = NULL;
- int instance;
-
- if (type >= tuner_count) {
- printk(KERN_WARNING "%s: invalid tuner type: %d (max: %d)\n",
- __func__, type, tuner_count-1);
- return NULL;
- }
-
- /* If i2c_adap is set, check that the tuner is at the correct address.
- * Otherwise, if i2c_adap is NULL, the tuner will be programmed directly
- * by the digital demod via calc_regs.
- */
- if (i2c_adap != NULL) {
- u8 b[1];
- struct i2c_msg msg = {
- .addr = i2c_addr, .flags = I2C_M_RD,
- .buf = b, .len = 1,
- };
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- if (1 != i2c_transfer(i2c_adap, &msg, 1))
- printk(KERN_WARNING "tuner-simple %d-%04x: "
- "unable to probe %s, proceeding anyway.",
- i2c_adapter_id(i2c_adap), i2c_addr,
- tuners[type].name);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
- }
-
- mutex_lock(&tuner_simple_list_mutex);
-
- instance = hybrid_tuner_request_state(struct tuner_simple_priv, priv,
- hybrid_tuner_instance_list,
- i2c_adap, i2c_addr,
- "tuner-simple");
- switch (instance) {
- case 0:
- mutex_unlock(&tuner_simple_list_mutex);
- return NULL;
- case 1:
- fe->tuner_priv = priv;
-
- priv->type = type;
- priv->tun = &tuners[type];
- priv->nr = simple_devcount++;
- break;
- default:
- fe->tuner_priv = priv;
- break;
- }
-
- mutex_unlock(&tuner_simple_list_mutex);
-
- memcpy(&fe->ops.tuner_ops, &simple_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- if (type != priv->type)
- tuner_warn("couldn't set type to %d. Using %d (%s) instead\n",
- type, priv->type, priv->tun->name);
- else
- tuner_info("type set to %d (%s)\n",
- priv->type, priv->tun->name);
-
- if ((debug) || ((atv_input[priv->nr] > 0) ||
- (dtv_input[priv->nr] > 0))) {
- if (0 == atv_input[priv->nr])
- tuner_info("tuner %d atv rf input will be "
- "autoselected\n", priv->nr);
- else
- tuner_info("tuner %d atv rf input will be "
- "set to input %d (insmod option)\n",
- priv->nr, atv_input[priv->nr]);
- if (0 == dtv_input[priv->nr])
- tuner_info("tuner %d dtv rf input will be "
- "autoselected\n", priv->nr);
- else
- tuner_info("tuner %d dtv rf input will be "
- "set to input %d (insmod option)\n",
- priv->nr, dtv_input[priv->nr]);
- }
-
- strlcpy(fe->ops.tuner_ops.info.name, priv->tun->name,
- sizeof(fe->ops.tuner_ops.info.name));
-
- return fe;
-}
-EXPORT_SYMBOL_GPL(simple_tuner_attach);
-
-MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver");
-MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
-MODULE_LICENSE("GPL");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/common/tuners/tuner-simple.h b/drivers/media/common/tuners/tuner-simple.h
deleted file mode 100644
index 381fa5d..0000000
--- a/drivers/media/common/tuners/tuner-simple.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __TUNER_SIMPLE_H__
-#define __TUNER_SIMPLE_H__
-
-#include <linux/i2c.h>
-#include "dvb_frontend.h"
-
-#if defined(CONFIG_MEDIA_TUNER_SIMPLE) || (defined(CONFIG_MEDIA_TUNER_SIMPLE_MODULE) && defined(MODULE))
-extern struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap,
- u8 i2c_addr,
- unsigned int type);
-#else
-static inline struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c_adap,
- u8 i2c_addr,
- unsigned int type)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif /* __TUNER_SIMPLE_H__ */
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
deleted file mode 100644
index 2da4440..0000000
--- a/drivers/media/common/tuners/tuner-types.c
+++ /dev/null
@@ -1,1883 +0,0 @@
-/*
- *
- * i2c tv tuner chip device type database.
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <media/tuner.h>
-#include <media/tuner-types.h>
-
-/* ---------------------------------------------------------------------- */
-
-/*
- * The floats in the tuner struct are computed at compile time
- * by gcc and cast back to integers. Thus we don't violate the
- * "no float in kernel" rule.
- *
- * A tuner_range may be referenced by multiple tuner_params structs.
- * There are many duplicates in here. Reusing tuner_range structs,
- * rather than defining new ones for each tuner, will cut down on
- * memory usage, and is preferred when possible.
- *
- * Each tuner_params array may contain one or more elements, one
- * for each video standard.
- *
- * FIXME: tuner_params struct contains an element, tda988x. We must
- * set this for all tuners that contain a tda988x chip, and then we
- * can remove this setting from the various card structs.
- *
- * FIXME: Right now, all tuners are using the first tuner_params[]
- * array element for analog mode. In the future, we will be merging
- * similar tuner definitions together, such that each tuner definition
- * will have a tuner_params struct for each available video standard.
- * At that point, the tuner_params[] array element will be chosen
- * based on the video standard in use.
- */
-
-/* The following was taken from dvb-pll.c: */
-
-/* Set AGC TOP value to 103 dBuV:
- * 0x80 = Control Byte
- * 0x40 = 250 uA charge pump (irrelevant)
- * 0x18 = Aux Byte to follow
- * 0x06 = 64.5 kHz divider (irrelevant)
- * 0x01 = Disable Vt (aka sleep)
- *
- * 0x00 = AGC Time constant 2s Iagc = 300 nA (vs 0x80 = 9 nA)
- * 0x50 = AGC Take over point = 103 dBuV
- */
-static u8 tua603x_agc103[] = { 2, 0x80|0x40|0x18|0x06|0x01, 0x00|0x50 };
-
-/* 0x04 = 166.67 kHz divider
- *
- * 0x80 = AGC Time constant 50ms Iagc = 9 uA
- * 0x20 = AGC Take over point = 112 dBuV
- */
-static u8 tua603x_agc112[] = { 2, 0x80|0x40|0x18|0x04|0x01, 0x80|0x20 };
-
-/* 0-9 */
-/* ------------ TUNER_TEMIC_PAL - TEMIC PAL ------------ */
-
-static struct tuner_range tuner_temic_pal_ranges[] = {
- { 16 * 140.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 463.25 /*MHz*/, 0x8e, 0x04, },
- { 16 * 999.99 , 0x8e, 0x01, },
-};
-
-static struct tuner_params tuner_temic_pal_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_pal_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_PAL_I - Philips PAL_I ------------ */
-
-static struct tuner_range tuner_philips_pal_i_ranges[] = {
- { 16 * 140.25 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 463.25 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_philips_pal_i_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_philips_pal_i_ranges,
- .count = ARRAY_SIZE(tuner_philips_pal_i_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_NTSC - Philips NTSC ------------ */
-
-static struct tuner_range tuner_philips_ntsc_ranges[] = {
- { 16 * 157.25 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 451.25 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_philips_ntsc_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_philips_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_philips_ntsc_ranges),
- .cb_first_if_lower_freq = 1,
- },
-};
-
-/* ------------ TUNER_PHILIPS_SECAM - Philips SECAM ------------ */
-
-static struct tuner_range tuner_philips_secam_ranges[] = {
- { 16 * 168.25 /*MHz*/, 0x8e, 0xa7, },
- { 16 * 447.25 /*MHz*/, 0x8e, 0x97, },
- { 16 * 999.99 , 0x8e, 0x37, },
-};
-
-static struct tuner_params tuner_philips_secam_params[] = {
- {
- .type = TUNER_PARAM_TYPE_SECAM,
- .ranges = tuner_philips_secam_ranges,
- .count = ARRAY_SIZE(tuner_philips_secam_ranges),
- .cb_first_if_lower_freq = 1,
- },
-};
-
-/* ------------ TUNER_PHILIPS_PAL - Philips PAL ------------ */
-
-static struct tuner_range tuner_philips_pal_ranges[] = {
- { 16 * 168.25 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 447.25 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_philips_pal_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_philips_pal_ranges,
- .count = ARRAY_SIZE(tuner_philips_pal_ranges),
- .cb_first_if_lower_freq = 1,
- },
-};
-
-/* ------------ TUNER_TEMIC_NTSC - TEMIC NTSC ------------ */
-
-static struct tuner_range tuner_temic_ntsc_ranges[] = {
- { 16 * 157.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 463.25 /*MHz*/, 0x8e, 0x04, },
- { 16 * 999.99 , 0x8e, 0x01, },
-};
-
-static struct tuner_params tuner_temic_ntsc_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_temic_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_temic_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_PAL_I - TEMIC PAL_I ------------ */
-
-static struct tuner_range tuner_temic_pal_i_ranges[] = {
- { 16 * 170.00 /*MHz*/, 0x8e, 0x02, },
- { 16 * 450.00 /*MHz*/, 0x8e, 0x04, },
- { 16 * 999.99 , 0x8e, 0x01, },
-};
-
-static struct tuner_params tuner_temic_pal_i_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_pal_i_ranges,
- .count = ARRAY_SIZE(tuner_temic_pal_i_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4036FY5_NTSC - TEMIC NTSC ------------ */
-
-static struct tuner_range tuner_temic_4036fy5_ntsc_ranges[] = {
- { 16 * 157.25 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 463.25 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_temic_4036fy5_ntsc_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_temic_4036fy5_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_temic_4036fy5_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_ALPS_TSBH1_NTSC - TEMIC NTSC ------------ */
-
-static struct tuner_range tuner_alps_tsb_1_ranges[] = {
- { 16 * 137.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 385.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_params tuner_alps_tsbh1_ntsc_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_alps_tsb_1_ranges,
- .count = ARRAY_SIZE(tuner_alps_tsb_1_ranges),
- },
-};
-
-/* 10-19 */
-/* ------------ TUNER_ALPS_TSBE1_PAL - TEMIC PAL ------------ */
-
-static struct tuner_params tuner_alps_tsb_1_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_alps_tsb_1_ranges,
- .count = ARRAY_SIZE(tuner_alps_tsb_1_ranges),
- },
-};
-
-/* ------------ TUNER_ALPS_TSBB5_PAL_I - Alps PAL_I ------------ */
-
-static struct tuner_range tuner_alps_tsb_5_pal_ranges[] = {
- { 16 * 133.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 351.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_params tuner_alps_tsbb5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_alps_tsb_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges),
- },
-};
-
-/* ------------ TUNER_ALPS_TSBE5_PAL - Alps PAL ------------ */
-
-static struct tuner_params tuner_alps_tsbe5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_alps_tsb_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges),
- },
-};
-
-/* ------------ TUNER_ALPS_TSBC5_PAL - Alps PAL ------------ */
-
-static struct tuner_params tuner_alps_tsbc5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_alps_tsb_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4006FH5_PAL - TEMIC PAL ------------ */
-
-static struct tuner_range tuner_lg_pal_ranges[] = {
- { 16 * 170.00 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 450.00 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_temic_4006fh5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_pal_ranges,
- .count = ARRAY_SIZE(tuner_lg_pal_ranges),
- },
-};
-
-/* ------------ TUNER_ALPS_TSHC6_NTSC - Alps NTSC ------------ */
-
-static struct tuner_range tuner_alps_tshc6_ntsc_ranges[] = {
- { 16 * 137.25 /*MHz*/, 0x8e, 0x14, },
- { 16 * 385.25 /*MHz*/, 0x8e, 0x12, },
- { 16 * 999.99 , 0x8e, 0x11, },
-};
-
-static struct tuner_params tuner_alps_tshc6_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_alps_tshc6_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_alps_tshc6_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_PAL_DK - TEMIC PAL ------------ */
-
-static struct tuner_range tuner_temic_pal_dk_ranges[] = {
- { 16 * 168.25 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 456.25 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_temic_pal_dk_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_pal_dk_ranges,
- .count = ARRAY_SIZE(tuner_temic_pal_dk_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_NTSC_M - Philips NTSC ------------ */
-
-static struct tuner_range tuner_philips_ntsc_m_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 454.00 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_philips_ntsc_m_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_philips_ntsc_m_ranges,
- .count = ARRAY_SIZE(tuner_philips_ntsc_m_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4066FY5_PAL_I - TEMIC PAL_I ------------ */
-
-static struct tuner_range tuner_temic_40x6f_5_pal_ranges[] = {
- { 16 * 169.00 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 454.00 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_temic_4066fy5_pal_i_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_40x6f_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_40x6f_5_pal_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4006FN5_MULTI_PAL - TEMIC PAL ------------ */
-
-static struct tuner_params tuner_temic_4006fn5_multi_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_40x6f_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_40x6f_5_pal_ranges),
- },
-};
-
-/* 20-29 */
-/* ------------ TUNER_TEMIC_4009FR5_PAL - TEMIC PAL ------------ */
-
-static struct tuner_range tuner_temic_4009f_5_pal_ranges[] = {
- { 16 * 141.00 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 464.00 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_temic_4009f_5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_4009f_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4039FR5_NTSC - TEMIC NTSC ------------ */
-
-static struct tuner_range tuner_temic_4x3x_f_5_ntsc_ranges[] = {
- { 16 * 158.00 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 453.00 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_temic_4039fr5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_temic_4x3x_f_5_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_temic_4x3x_f_5_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4046FM5 - TEMIC PAL ------------ */
-
-static struct tuner_params tuner_temic_4046fm5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_40x6f_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_40x6f_5_pal_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_PAL_DK - Philips PAL ------------ */
-
-static struct tuner_params tuner_philips_pal_dk_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_pal_ranges,
- .count = ARRAY_SIZE(tuner_lg_pal_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_FQ1216ME - Philips PAL ------------ */
-
-static struct tuner_params tuner_philips_fq1216me_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_pal_ranges,
- .count = ARRAY_SIZE(tuner_lg_pal_ranges),
- .has_tda9887 = 1,
- .port1_active = 1,
- .port2_active = 1,
- .port2_invert_for_secam_lc = 1,
- },
-};
-
-/* ------------ TUNER_LG_PAL_I_FM - LGINNOTEK PAL_I ------------ */
-
-static struct tuner_params tuner_lg_pal_i_fm_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_pal_ranges,
- .count = ARRAY_SIZE(tuner_lg_pal_ranges),
- },
-};
-
-/* ------------ TUNER_LG_PAL_I - LGINNOTEK PAL_I ------------ */
-
-static struct tuner_params tuner_lg_pal_i_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_pal_ranges,
- .count = ARRAY_SIZE(tuner_lg_pal_ranges),
- },
-};
-
-/* ------------ TUNER_LG_NTSC_FM - LGINNOTEK NTSC ------------ */
-
-static struct tuner_range tuner_lg_ntsc_fm_ranges[] = {
- { 16 * 210.00 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 497.00 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_lg_ntsc_fm_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_lg_ntsc_fm_ranges,
- .count = ARRAY_SIZE(tuner_lg_ntsc_fm_ranges),
- },
-};
-
-/* ------------ TUNER_LG_PAL_FM - LGINNOTEK PAL ------------ */
-
-static struct tuner_params tuner_lg_pal_fm_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_pal_ranges,
- .count = ARRAY_SIZE(tuner_lg_pal_ranges),
- },
-};
-
-/* ------------ TUNER_LG_PAL - LGINNOTEK PAL ------------ */
-
-static struct tuner_params tuner_lg_pal_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_pal_ranges,
- .count = ARRAY_SIZE(tuner_lg_pal_ranges),
- },
-};
-
-/* 30-39 */
-/* ------------ TUNER_TEMIC_4009FN5_MULTI_PAL_FM - TEMIC PAL ------------ */
-
-static struct tuner_params tuner_temic_4009_fn5_multi_pal_fm_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_4009f_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges),
- },
-};
-
-/* ------------ TUNER_SHARP_2U5JF5540_NTSC - SHARP NTSC ------------ */
-
-static struct tuner_range tuner_sharp_2u5jf5540_ntsc_ranges[] = {
- { 16 * 137.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 317.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_params tuner_sharp_2u5jf5540_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_sharp_2u5jf5540_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_sharp_2u5jf5540_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_Samsung_PAL_TCPM9091PD27 - Samsung PAL ------------ */
-
-static struct tuner_range tuner_samsung_pal_tcpm9091pd27_ranges[] = {
- { 16 * 169 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 464 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_samsung_pal_tcpm9091pd27_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_samsung_pal_tcpm9091pd27_ranges,
- .count = ARRAY_SIZE(tuner_samsung_pal_tcpm9091pd27_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4106FH5 - TEMIC PAL ------------ */
-
-static struct tuner_params tuner_temic_4106fh5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_4009f_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4012FY5 - TEMIC PAL ------------ */
-
-static struct tuner_params tuner_temic_4012fy5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_pal_ranges),
- },
-};
-
-/* ------------ TUNER_TEMIC_4136FY5 - TEMIC NTSC ------------ */
-
-static struct tuner_params tuner_temic_4136_fy5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_temic_4x3x_f_5_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_temic_4x3x_f_5_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_LG_PAL_NEW_TAPC - LGINNOTEK PAL ------------ */
-
-static struct tuner_range tuner_lg_new_tapc_ranges[] = {
- { 16 * 170.00 /*MHz*/, 0x8e, 0x01, },
- { 16 * 450.00 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_params tuner_lg_pal_new_tapc_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_new_tapc_ranges,
- .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_FM1216ME_MK3 - Philips PAL ------------ */
-
-static struct tuner_range tuner_fm1216me_mk3_pal_ranges[] = {
- { 16 * 158.00 /*MHz*/, 0x8e, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x04, },
-};
-
-static struct tuner_params tuner_fm1216me_mk3_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_fm1216me_mk3_pal_ranges,
- .count = ARRAY_SIZE(tuner_fm1216me_mk3_pal_ranges),
- .cb_first_if_lower_freq = 1,
- .has_tda9887 = 1,
- .port1_active = 1,
- .port2_active = 1,
- .port2_invert_for_secam_lc = 1,
- .port1_fm_high_sensitivity = 1,
- .default_top_mid = -2,
- .default_top_secam_mid = -2,
- .default_top_secam_high = -2,
- },
-};
-
-/* ------------ TUNER_PHILIPS_FM1216MK5 - Philips PAL ------------ */
-
-static struct tuner_range tuner_fm1216mk5_pal_ranges[] = {
- { 16 * 158.00 /*MHz*/, 0xce, 0x01, },
- { 16 * 441.00 /*MHz*/, 0xce, 0x02, },
- { 16 * 864.00 , 0xce, 0x04, },
-};
-
-static struct tuner_params tuner_fm1216mk5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_fm1216mk5_pal_ranges,
- .count = ARRAY_SIZE(tuner_fm1216mk5_pal_ranges),
- .cb_first_if_lower_freq = 1,
- .has_tda9887 = 1,
- .port1_active = 1,
- .port2_active = 1,
- .port2_invert_for_secam_lc = 1,
- .port1_fm_high_sensitivity = 1,
- .default_top_mid = -2,
- .default_top_secam_mid = -2,
- .default_top_secam_high = -2,
- },
-};
-
-/* ------------ TUNER_LG_NTSC_NEW_TAPC - LGINNOTEK NTSC ------------ */
-
-static struct tuner_params tuner_lg_ntsc_new_tapc_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_lg_new_tapc_ranges,
- .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges),
- },
-};
-
-/* 40-49 */
-/* ------------ TUNER_HITACHI_NTSC - HITACHI NTSC ------------ */
-
-static struct tuner_params tuner_hitachi_ntsc_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_lg_new_tapc_ranges,
- .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_PAL_MK - Philips PAL ------------ */
-
-static struct tuner_range tuner_philips_pal_mk_pal_ranges[] = {
- { 16 * 140.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 463.25 /*MHz*/, 0x8e, 0xc2, },
- { 16 * 999.99 , 0x8e, 0xcf, },
-};
-
-static struct tuner_params tuner_philips_pal_mk_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_philips_pal_mk_pal_ranges,
- .count = ARRAY_SIZE(tuner_philips_pal_mk_pal_ranges),
- },
-};
-
-/* ---- TUNER_PHILIPS_FCV1236D - Philips FCV1236D (ATSC/NTSC) ---- */
-
-static struct tuner_range tuner_philips_fcv1236d_ntsc_ranges[] = {
- { 16 * 157.25 /*MHz*/, 0x8e, 0xa2, },
- { 16 * 451.25 /*MHz*/, 0x8e, 0x92, },
- { 16 * 999.99 , 0x8e, 0x32, },
-};
-
-static struct tuner_range tuner_philips_fcv1236d_atsc_ranges[] = {
- { 16 * 159.00 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 453.00 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_philips_fcv1236d_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_philips_fcv1236d_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_philips_fcv1236d_ntsc_ranges),
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_philips_fcv1236d_atsc_ranges,
- .count = ARRAY_SIZE(tuner_philips_fcv1236d_atsc_ranges),
- .iffreq = 16 * 44.00,
- },
-};
-
-/* ------------ TUNER_PHILIPS_FM1236_MK3 - Philips NTSC ------------ */
-
-static struct tuner_range tuner_fm1236_mk3_ntsc_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0x8e, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x04, },
-};
-
-static struct tuner_params tuner_fm1236_mk3_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_fm1236_mk3_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
- .cb_first_if_lower_freq = 1,
- .has_tda9887 = 1,
- .port1_active = 1,
- .port2_active = 1,
- .port1_fm_high_sensitivity = 1,
- },
-};
-
-/* ------------ TUNER_PHILIPS_4IN1 - Philips NTSC ------------ */
-
-static struct tuner_params tuner_philips_4in1_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_fm1236_mk3_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_MICROTUNE_4049FM5 - Microtune PAL ------------ */
-
-static struct tuner_params tuner_microtune_4049_fm5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_temic_4009f_5_pal_ranges,
- .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges),
- .has_tda9887 = 1,
- .port1_invert_for_secam_lc = 1,
- .default_pll_gating_18 = 1,
- .fm_gain_normal=1,
- .radio_if = 1, /* 33.3 MHz */
- },
-};
-
-/* ------------ TUNER_PANASONIC_VP27 - Panasonic NTSC ------------ */
-
-static struct tuner_range tuner_panasonic_vp27_ntsc_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0xce, 0x01, },
- { 16 * 454.00 /*MHz*/, 0xce, 0x02, },
- { 16 * 999.99 , 0xce, 0x08, },
-};
-
-static struct tuner_params tuner_panasonic_vp27_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_panasonic_vp27_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_panasonic_vp27_ntsc_ranges),
- .has_tda9887 = 1,
- .intercarrier_mode = 1,
- .default_top_low = -3,
- .default_top_mid = -3,
- .default_top_high = -3,
- },
-};
-
-/* ------------ TUNER_TNF_8831BGFF - Philips PAL ------------ */
-
-static struct tuner_range tuner_tnf_8831bgff_pal_ranges[] = {
- { 16 * 161.25 /*MHz*/, 0x8e, 0xa0, },
- { 16 * 463.25 /*MHz*/, 0x8e, 0x90, },
- { 16 * 999.99 , 0x8e, 0x30, },
-};
-
-static struct tuner_params tuner_tnf_8831bgff_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_tnf_8831bgff_pal_ranges,
- .count = ARRAY_SIZE(tuner_tnf_8831bgff_pal_ranges),
- },
-};
-
-/* ------------ TUNER_MICROTUNE_4042FI5 - Microtune NTSC ------------ */
-
-static struct tuner_range tuner_microtune_4042fi5_ntsc_ranges[] = {
- { 16 * 162.00 /*MHz*/, 0x8e, 0xa2, },
- { 16 * 457.00 /*MHz*/, 0x8e, 0x94, },
- { 16 * 999.99 , 0x8e, 0x31, },
-};
-
-static struct tuner_range tuner_microtune_4042fi5_atsc_ranges[] = {
- { 16 * 162.00 /*MHz*/, 0x8e, 0xa1, },
- { 16 * 457.00 /*MHz*/, 0x8e, 0x91, },
- { 16 * 999.99 , 0x8e, 0x31, },
-};
-
-static struct tuner_params tuner_microtune_4042fi5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_microtune_4042fi5_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_microtune_4042fi5_ntsc_ranges),
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_microtune_4042fi5_atsc_ranges,
- .count = ARRAY_SIZE(tuner_microtune_4042fi5_atsc_ranges),
- .iffreq = 16 * 44.00 /*MHz*/,
- },
-};
-
-/* 50-59 */
-/* ------------ TUNER_TCL_2002N - TCL NTSC ------------ */
-
-static struct tuner_range tuner_tcl_2002n_ntsc_ranges[] = {
- { 16 * 172.00 /*MHz*/, 0x8e, 0x01, },
- { 16 * 448.00 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_params tuner_tcl_2002n_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_tcl_2002n_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_tcl_2002n_ntsc_ranges),
- .cb_first_if_lower_freq = 1,
- },
-};
-
-/* ------------ TUNER_PHILIPS_FM1256_IH3 - Philips PAL ------------ */
-
-static struct tuner_params tuner_philips_fm1256_ih3_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_fm1236_mk3_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
- .radio_if = 1, /* 33.3 MHz */
- },
-};
-
-/* ------------ TUNER_THOMSON_DTT7610 - THOMSON ATSC ------------ */
-
-/* single range used for both ntsc and atsc */
-static struct tuner_range tuner_thomson_dtt7610_ntsc_ranges[] = {
- { 16 * 157.25 /*MHz*/, 0x8e, 0x39, },
- { 16 * 454.00 /*MHz*/, 0x8e, 0x3a, },
- { 16 * 999.99 , 0x8e, 0x3c, },
-};
-
-static struct tuner_params tuner_thomson_dtt7610_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_thomson_dtt7610_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_thomson_dtt7610_ntsc_ranges),
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_thomson_dtt7610_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_thomson_dtt7610_ntsc_ranges),
- .iffreq = 16 * 44.00 /*MHz*/,
- },
-};
-
-/* ------------ TUNER_PHILIPS_FQ1286 - Philips NTSC ------------ */
-
-static struct tuner_range tuner_philips_fq1286_ntsc_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0x8e, 0x41, },
- { 16 * 454.00 /*MHz*/, 0x8e, 0x42, },
- { 16 * 999.99 , 0x8e, 0x04, },
-};
-
-static struct tuner_params tuner_philips_fq1286_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_philips_fq1286_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_philips_fq1286_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_TCL_2002MB - TCL PAL ------------ */
-
-static struct tuner_range tuner_tcl_2002mb_pal_ranges[] = {
- { 16 * 170.00 /*MHz*/, 0xce, 0x01, },
- { 16 * 450.00 /*MHz*/, 0xce, 0x02, },
- { 16 * 999.99 , 0xce, 0x08, },
-};
-
-static struct tuner_params tuner_tcl_2002mb_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_tcl_2002mb_pal_ranges,
- .count = ARRAY_SIZE(tuner_tcl_2002mb_pal_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_FQ1216AME_MK4 - Philips PAL ------------ */
-
-static struct tuner_range tuner_philips_fq12_6a___mk4_pal_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0xce, 0x01, },
- { 16 * 442.00 /*MHz*/, 0xce, 0x02, },
- { 16 * 999.99 , 0xce, 0x04, },
-};
-
-static struct tuner_params tuner_philips_fq1216ame_mk4_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_philips_fq12_6a___mk4_pal_ranges,
- .count = ARRAY_SIZE(tuner_philips_fq12_6a___mk4_pal_ranges),
- .has_tda9887 = 1,
- .port1_active = 1,
- .port2_invert_for_secam_lc = 1,
- .default_top_mid = -2,
- .default_top_secam_low = -2,
- .default_top_secam_mid = -2,
- .default_top_secam_high = -2,
- },
-};
-
-/* ------------ TUNER_PHILIPS_FQ1236A_MK4 - Philips NTSC ------------ */
-
-static struct tuner_params tuner_philips_fq1236a_mk4_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_fm1236_mk3_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_YMEC_TVF_8531MF - Philips NTSC ------------ */
-
-static struct tuner_params tuner_ymec_tvf_8531mf_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_philips_ntsc_m_ranges,
- .count = ARRAY_SIZE(tuner_philips_ntsc_m_ranges),
- },
-};
-
-/* ------------ TUNER_YMEC_TVF_5533MF - Philips NTSC ------------ */
-
-static struct tuner_range tuner_ymec_tvf_5533mf_ntsc_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0x8e, 0x01, },
- { 16 * 454.00 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x04, },
-};
-
-static struct tuner_params tuner_ymec_tvf_5533mf_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_ymec_tvf_5533mf_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_ymec_tvf_5533mf_ntsc_ranges),
- },
-};
-
-/* 60-69 */
-/* ------------ TUNER_THOMSON_DTT761X - THOMSON ATSC ------------ */
-/* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */
-
-static struct tuner_range tuner_thomson_dtt761x_ntsc_ranges[] = {
- { 16 * 145.25 /*MHz*/, 0x8e, 0x39, },
- { 16 * 415.25 /*MHz*/, 0x8e, 0x3a, },
- { 16 * 999.99 , 0x8e, 0x3c, },
-};
-
-static struct tuner_range tuner_thomson_dtt761x_atsc_ranges[] = {
- { 16 * 147.00 /*MHz*/, 0x8e, 0x39, },
- { 16 * 417.00 /*MHz*/, 0x8e, 0x3a, },
- { 16 * 999.99 , 0x8e, 0x3c, },
-};
-
-static struct tuner_params tuner_thomson_dtt761x_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_thomson_dtt761x_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_thomson_dtt761x_ntsc_ranges),
- .has_tda9887 = 1,
- .fm_gain_normal = 1,
- .radio_if = 2, /* 41.3 MHz */
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_thomson_dtt761x_atsc_ranges,
- .count = ARRAY_SIZE(tuner_thomson_dtt761x_atsc_ranges),
- .iffreq = 16 * 44.00, /*MHz*/
- },
-};
-
-/* ------------ TUNER_TENA_9533_DI - Philips PAL ------------ */
-
-static struct tuner_range tuner_tena_9533_di_pal_ranges[] = {
- { 16 * 160.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 464.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x04, },
-};
-
-static struct tuner_params tuner_tena_9533_di_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_tena_9533_di_pal_ranges,
- .count = ARRAY_SIZE(tuner_tena_9533_di_pal_ranges),
- },
-};
-
-/* ------------ TUNER_TENA_TNF_5337 - Tena tnf5337MFD STD M/N ------------ */
-
-static struct tuner_range tuner_tena_tnf_5337_ntsc_ranges[] = {
- { 16 * 166.25 /*MHz*/, 0x86, 0x01, },
- { 16 * 466.25 /*MHz*/, 0x86, 0x02, },
- { 16 * 999.99 , 0x86, 0x08, },
-};
-
-static struct tuner_params tuner_tena_tnf_5337_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_tena_tnf_5337_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_tena_tnf_5337_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_FMD1216ME(X)_MK3 - Philips PAL ------------ */
-
-static struct tuner_range tuner_philips_fmd1216me_mk3_pal_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0x86, 0x51, },
- { 16 * 442.00 /*MHz*/, 0x86, 0x52, },
- { 16 * 999.99 , 0x86, 0x54, },
-};
-
-static struct tuner_range tuner_philips_fmd1216me_mk3_dvb_ranges[] = {
- { 16 * 143.87 /*MHz*/, 0xbc, 0x41 },
- { 16 * 158.87 /*MHz*/, 0xf4, 0x41 },
- { 16 * 329.87 /*MHz*/, 0xbc, 0x42 },
- { 16 * 441.87 /*MHz*/, 0xf4, 0x42 },
- { 16 * 625.87 /*MHz*/, 0xbc, 0x44 },
- { 16 * 803.87 /*MHz*/, 0xf4, 0x44 },
- { 16 * 999.99 , 0xfc, 0x44 },
-};
-
-static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_philips_fmd1216me_mk3_pal_ranges,
- .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_pal_ranges),
- .has_tda9887 = 1,
- .port1_active = 1,
- .port2_active = 1,
- .port2_fm_high_sensitivity = 1,
- .port2_invert_for_secam_lc = 1,
- .port1_set_for_fm_mono = 1,
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_philips_fmd1216me_mk3_dvb_ranges,
- .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_dvb_ranges),
- .iffreq = 16 * 36.125, /*MHz*/
- },
-};
-
-static struct tuner_params tuner_philips_fmd1216mex_mk3_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_philips_fmd1216me_mk3_pal_ranges,
- .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_pal_ranges),
- .has_tda9887 = 1,
- .port1_active = 1,
- .port2_active = 1,
- .port2_fm_high_sensitivity = 1,
- .port2_invert_for_secam_lc = 1,
- .port1_set_for_fm_mono = 1,
- .radio_if = 1,
- .fm_gain_normal = 1,
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_philips_fmd1216me_mk3_dvb_ranges,
- .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_dvb_ranges),
- .iffreq = 16 * 36.125, /*MHz*/
- },
-};
-
-/* ------ TUNER_LG_TDVS_H06XF - LG INNOTEK / INFINEON ATSC ----- */
-
-static struct tuner_range tuner_tua6034_ntsc_ranges[] = {
- { 16 * 165.00 /*MHz*/, 0x8e, 0x01 },
- { 16 * 450.00 /*MHz*/, 0x8e, 0x02 },
- { 16 * 999.99 , 0x8e, 0x04 },
-};
-
-static struct tuner_range tuner_tua6034_atsc_ranges[] = {
- { 16 * 165.00 /*MHz*/, 0xce, 0x01 },
- { 16 * 450.00 /*MHz*/, 0xce, 0x02 },
- { 16 * 999.99 , 0xce, 0x04 },
-};
-
-static struct tuner_params tuner_lg_tdvs_h06xf_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_tua6034_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_tua6034_ntsc_ranges),
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_tua6034_atsc_ranges,
- .count = ARRAY_SIZE(tuner_tua6034_atsc_ranges),
- .iffreq = 16 * 44.00,
- },
-};
-
-/* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */
-
-static struct tuner_range tuner_ymec_tvf66t5_b_dff_pal_ranges[] = {
- { 16 * 160.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 464.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_params tuner_ymec_tvf66t5_b_dff_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_ymec_tvf66t5_b_dff_pal_ranges,
- .count = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_pal_ranges),
- },
-};
-
-/* ------------ TUNER_LG_NTSC_TALN_MINI - LGINNOTEK NTSC ------------ */
-
-static struct tuner_range tuner_lg_taln_ntsc_ranges[] = {
- { 16 * 137.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 373.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_range tuner_lg_taln_pal_secam_ranges[] = {
- { 16 * 150.00 /*MHz*/, 0x8e, 0x01, },
- { 16 * 425.00 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_params tuner_lg_taln_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_lg_taln_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_lg_taln_ntsc_ranges),
- },{
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_lg_taln_pal_secam_ranges,
- .count = ARRAY_SIZE(tuner_lg_taln_pal_secam_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_TD1316 - Philips PAL ------------ */
-
-static struct tuner_range tuner_philips_td1316_pal_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0xc8, 0xa1, },
- { 16 * 442.00 /*MHz*/, 0xc8, 0xa2, },
- { 16 * 999.99 , 0xc8, 0xa4, },
-};
-
-static struct tuner_range tuner_philips_td1316_dvb_ranges[] = {
- { 16 * 93.834 /*MHz*/, 0xca, 0x60, },
- { 16 * 123.834 /*MHz*/, 0xca, 0xa0, },
- { 16 * 163.834 /*MHz*/, 0xca, 0xc0, },
- { 16 * 253.834 /*MHz*/, 0xca, 0x60, },
- { 16 * 383.834 /*MHz*/, 0xca, 0xa0, },
- { 16 * 443.834 /*MHz*/, 0xca, 0xc0, },
- { 16 * 583.834 /*MHz*/, 0xca, 0x60, },
- { 16 * 793.834 /*MHz*/, 0xca, 0xa0, },
- { 16 * 999.999 , 0xca, 0xe0, },
-};
-
-static struct tuner_params tuner_philips_td1316_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_philips_td1316_pal_ranges,
- .count = ARRAY_SIZE(tuner_philips_td1316_pal_ranges),
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_philips_td1316_dvb_ranges,
- .count = ARRAY_SIZE(tuner_philips_td1316_dvb_ranges),
- .iffreq = 16 * 36.166667 /*MHz*/,
- },
-};
-
-/* ------------ TUNER_PHILIPS_TUV1236D - Philips ATSC ------------ */
-
-static struct tuner_range tuner_tuv1236d_ntsc_ranges[] = {
- { 16 * 157.25 /*MHz*/, 0xce, 0x01, },
- { 16 * 454.00 /*MHz*/, 0xce, 0x02, },
- { 16 * 999.99 , 0xce, 0x04, },
-};
-
-static struct tuner_range tuner_tuv1236d_atsc_ranges[] = {
- { 16 * 157.25 /*MHz*/, 0xc6, 0x41, },
- { 16 * 454.00 /*MHz*/, 0xc6, 0x42, },
- { 16 * 999.99 , 0xc6, 0x44, },
-};
-
-static struct tuner_params tuner_tuv1236d_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_tuv1236d_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_tuv1236d_ntsc_ranges),
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_tuv1236d_atsc_ranges,
- .count = ARRAY_SIZE(tuner_tuv1236d_atsc_ranges),
- .iffreq = 16 * 44.00,
- },
-};
-
-/* ------------ TUNER_TNF_xxx5 - Texas Instruments--------- */
-/* This is known to work with Tenna TVF58t5-MFF and TVF5835 MFF
- * but it is expected to work also with other Tenna/Ymec
- * models based on TI SN 761677 chip on both PAL and NTSC
- */
-
-static struct tuner_range tuner_tnf_5335_d_if_pal_ranges[] = {
- { 16 * 168.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 471.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_range tuner_tnf_5335mf_ntsc_ranges[] = {
- { 16 * 169.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 469.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x08, },
-};
-
-static struct tuner_params tuner_tnf_5335mf_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_tnf_5335mf_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_tnf_5335mf_ntsc_ranges),
- },
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_tnf_5335_d_if_pal_ranges,
- .count = ARRAY_SIZE(tuner_tnf_5335_d_if_pal_ranges),
- },
-};
-
-/* 70-79 */
-/* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */
-
-/* '+ 4' turns on the Low Noise Amplifier */
-static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = {
- { 16 * 130.00 /*MHz*/, 0xce, 0x01 + 4, },
- { 16 * 364.50 /*MHz*/, 0xce, 0x02 + 4, },
- { 16 * 999.99 , 0xce, 0x08 + 4, },
-};
-
-static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_samsung_tcpn_2121p30a_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_samsung_tcpn_2121p30a_ntsc_ranges),
- },
-};
-
-/* ------------ TUNER_THOMSON_FE6600 - DViCO Hybrid PAL ------------ */
-
-static struct tuner_range tuner_thomson_fe6600_pal_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0xfe, 0x11, },
- { 16 * 442.00 /*MHz*/, 0xf6, 0x12, },
- { 16 * 999.99 , 0xf6, 0x18, },
-};
-
-static struct tuner_range tuner_thomson_fe6600_dvb_ranges[] = {
- { 16 * 250.00 /*MHz*/, 0xb4, 0x12, },
- { 16 * 455.00 /*MHz*/, 0xfe, 0x11, },
- { 16 * 775.50 /*MHz*/, 0xbc, 0x18, },
- { 16 * 999.99 , 0xf4, 0x18, },
-};
-
-static struct tuner_params tuner_thomson_fe6600_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_thomson_fe6600_pal_ranges,
- .count = ARRAY_SIZE(tuner_thomson_fe6600_pal_ranges),
- },
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_thomson_fe6600_dvb_ranges,
- .count = ARRAY_SIZE(tuner_thomson_fe6600_dvb_ranges),
- .iffreq = 16 * 36.125 /*MHz*/,
- },
-};
-
-/* ------------ TUNER_SAMSUNG_TCPG_6121P30A - Samsung PAL ------------ */
-
-/* '+ 4' turns on the Low Noise Amplifier */
-static struct tuner_range tuner_samsung_tcpg_6121p30a_pal_ranges[] = {
- { 16 * 146.25 /*MHz*/, 0xce, 0x01 + 4, },
- { 16 * 428.50 /*MHz*/, 0xce, 0x02 + 4, },
- { 16 * 999.99 , 0xce, 0x08 + 4, },
-};
-
-static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_samsung_tcpg_6121p30a_pal_ranges,
- .count = ARRAY_SIZE(tuner_samsung_tcpg_6121p30a_pal_ranges),
- .has_tda9887 = 1,
- .port1_active = 1,
- .port2_active = 1,
- .port2_invert_for_secam_lc = 1,
- },
-};
-
-/* ------------ TUNER_TCL_MF02GIP-5N-E - TCL MF02GIP-5N ------------ */
-
-static struct tuner_range tuner_tcl_mf02gip_5n_ntsc_ranges[] = {
- { 16 * 172.00 /*MHz*/, 0x8e, 0x01, },
- { 16 * 448.00 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x04, },
-};
-
-static struct tuner_params tuner_tcl_mf02gip_5n_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_tcl_mf02gip_5n_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_ntsc_ranges),
- .cb_first_if_lower_freq = 1,
- },
-};
-
-/* 80-89 */
-/* --------- TUNER_PHILIPS_FQ1216LME_MK3 -- active loopthrough, no FM ------- */
-
-static struct tuner_params tuner_fq1216lme_mk3_params[] = {
- {
- .type = TUNER_PARAM_TYPE_PAL,
- .ranges = tuner_fm1216me_mk3_pal_ranges,
- .count = ARRAY_SIZE(tuner_fm1216me_mk3_pal_ranges),
- .cb_first_if_lower_freq = 1, /* not specified, but safe to do */
- .has_tda9887 = 1, /* TDA9886 */
- .port1_active = 1,
- .port2_active = 1,
- .port2_invert_for_secam_lc = 1,
- .default_top_low = 4,
- .default_top_mid = 4,
- .default_top_high = 4,
- .default_top_secam_low = 4,
- .default_top_secam_mid = 4,
- .default_top_secam_high = 4,
- },
-};
-
-/* ----- TUNER_PARTSNIC_PTI_5NF05 - Partsnic (Daewoo) PTI-5NF05 NTSC ----- */
-
-static struct tuner_range tuner_partsnic_pti_5nf05_ranges[] = {
- /* The datasheet specified channel ranges and the bandswitch byte */
- /* The control byte value of 0x8e is just a guess */
- { 16 * 133.25 /*MHz*/, 0x8e, 0x01, }, /* Channels 2 - B */
- { 16 * 367.25 /*MHz*/, 0x8e, 0x02, }, /* Channels C - W+11 */
- { 16 * 999.99 , 0x8e, 0x08, }, /* Channels W+12 - 69 */
-};
-
-static struct tuner_params tuner_partsnic_pti_5nf05_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_partsnic_pti_5nf05_ranges,
- .count = ARRAY_SIZE(tuner_partsnic_pti_5nf05_ranges),
- .cb_first_if_lower_freq = 1, /* not specified but safe to do */
- },
-};
-
-/* --------- TUNER_PHILIPS_CU1216L - DVB-C NIM ------------------------- */
-
-static struct tuner_range tuner_cu1216l_ranges[] = {
- { 16 * 160.25 /*MHz*/, 0xce, 0x01 },
- { 16 * 444.25 /*MHz*/, 0xce, 0x02 },
- { 16 * 999.99 , 0xce, 0x04 },
-};
-
-static struct tuner_params tuner_philips_cu1216l_params[] = {
- {
- .type = TUNER_PARAM_TYPE_DIGITAL,
- .ranges = tuner_cu1216l_ranges,
- .count = ARRAY_SIZE(tuner_cu1216l_ranges),
- .iffreq = 16 * 36.125, /*MHz*/
- },
-};
-
-/* ---------------------- TUNER_SONY_BTF_PXN01Z ------------------------ */
-
-static struct tuner_range tuner_sony_btf_pxn01z_ranges[] = {
- { 16 * 137.25 /*MHz*/, 0x8e, 0x01, },
- { 16 * 367.25 /*MHz*/, 0x8e, 0x02, },
- { 16 * 999.99 , 0x8e, 0x04, },
-};
-
-static struct tuner_params tuner_sony_btf_pxn01z_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_sony_btf_pxn01z_ranges,
- .count = ARRAY_SIZE(tuner_sony_btf_pxn01z_ranges),
- },
-};
-
-/* ------------ TUNER_PHILIPS_FQ1236_MK5 - Philips NTSC ------------ */
-
-static struct tuner_params tuner_philips_fq1236_mk5_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_fm1236_mk3_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
- .has_tda9887 = 1, /* TDA9885, no FM radio */
- },
-};
-
-/* --------------------------------------------------------------------- */
-
-struct tunertype tuners[] = {
- /* 0-9 */
- [TUNER_TEMIC_PAL] = { /* TEMIC PAL */
- .name = "Temic PAL (4002 FH5)",
- .params = tuner_temic_pal_params,
- .count = ARRAY_SIZE(tuner_temic_pal_params),
- },
- [TUNER_PHILIPS_PAL_I] = { /* Philips PAL_I */
- .name = "Philips PAL_I (FI1246 and compatibles)",
- .params = tuner_philips_pal_i_params,
- .count = ARRAY_SIZE(tuner_philips_pal_i_params),
- },
- [TUNER_PHILIPS_NTSC] = { /* Philips NTSC */
- .name = "Philips NTSC (FI1236,FM1236 and compatibles)",
- .params = tuner_philips_ntsc_params,
- .count = ARRAY_SIZE(tuner_philips_ntsc_params),
- },
- [TUNER_PHILIPS_SECAM] = { /* Philips SECAM */
- .name = "Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)",
- .params = tuner_philips_secam_params,
- .count = ARRAY_SIZE(tuner_philips_secam_params),
- },
- [TUNER_ABSENT] = { /* Tuner Absent */
- .name = "NoTuner",
- },
- [TUNER_PHILIPS_PAL] = { /* Philips PAL */
- .name = "Philips PAL_BG (FI1216 and compatibles)",
- .params = tuner_philips_pal_params,
- .count = ARRAY_SIZE(tuner_philips_pal_params),
- },
- [TUNER_TEMIC_NTSC] = { /* TEMIC NTSC */
- .name = "Temic NTSC (4032 FY5)",
- .params = tuner_temic_ntsc_params,
- .count = ARRAY_SIZE(tuner_temic_ntsc_params),
- },
- [TUNER_TEMIC_PAL_I] = { /* TEMIC PAL_I */
- .name = "Temic PAL_I (4062 FY5)",
- .params = tuner_temic_pal_i_params,
- .count = ARRAY_SIZE(tuner_temic_pal_i_params),
- },
- [TUNER_TEMIC_4036FY5_NTSC] = { /* TEMIC NTSC */
- .name = "Temic NTSC (4036 FY5)",
- .params = tuner_temic_4036fy5_ntsc_params,
- .count = ARRAY_SIZE(tuner_temic_4036fy5_ntsc_params),
- },
- [TUNER_ALPS_TSBH1_NTSC] = { /* TEMIC NTSC */
- .name = "Alps HSBH1",
- .params = tuner_alps_tsbh1_ntsc_params,
- .count = ARRAY_SIZE(tuner_alps_tsbh1_ntsc_params),
- },
-
- /* 10-19 */
- [TUNER_ALPS_TSBE1_PAL] = { /* TEMIC PAL */
- .name = "Alps TSBE1",
- .params = tuner_alps_tsb_1_params,
- .count = ARRAY_SIZE(tuner_alps_tsb_1_params),
- },
- [TUNER_ALPS_TSBB5_PAL_I] = { /* Alps PAL_I */
- .name = "Alps TSBB5",
- .params = tuner_alps_tsbb5_params,
- .count = ARRAY_SIZE(tuner_alps_tsbb5_params),
- },
- [TUNER_ALPS_TSBE5_PAL] = { /* Alps PAL */
- .name = "Alps TSBE5",
- .params = tuner_alps_tsbe5_params,
- .count = ARRAY_SIZE(tuner_alps_tsbe5_params),
- },
- [TUNER_ALPS_TSBC5_PAL] = { /* Alps PAL */
- .name = "Alps TSBC5",
- .params = tuner_alps_tsbc5_params,
- .count = ARRAY_SIZE(tuner_alps_tsbc5_params),
- },
- [TUNER_TEMIC_4006FH5_PAL] = { /* TEMIC PAL */
- .name = "Temic PAL_BG (4006FH5)",
- .params = tuner_temic_4006fh5_params,
- .count = ARRAY_SIZE(tuner_temic_4006fh5_params),
- },
- [TUNER_ALPS_TSHC6_NTSC] = { /* Alps NTSC */
- .name = "Alps TSCH6",
- .params = tuner_alps_tshc6_params,
- .count = ARRAY_SIZE(tuner_alps_tshc6_params),
- },
- [TUNER_TEMIC_PAL_DK] = { /* TEMIC PAL */
- .name = "Temic PAL_DK (4016 FY5)",
- .params = tuner_temic_pal_dk_params,
- .count = ARRAY_SIZE(tuner_temic_pal_dk_params),
- },
- [TUNER_PHILIPS_NTSC_M] = { /* Philips NTSC */
- .name = "Philips NTSC_M (MK2)",
- .params = tuner_philips_ntsc_m_params,
- .count = ARRAY_SIZE(tuner_philips_ntsc_m_params),
- },
- [TUNER_TEMIC_4066FY5_PAL_I] = { /* TEMIC PAL_I */
- .name = "Temic PAL_I (4066 FY5)",
- .params = tuner_temic_4066fy5_pal_i_params,
- .count = ARRAY_SIZE(tuner_temic_4066fy5_pal_i_params),
- },
- [TUNER_TEMIC_4006FN5_MULTI_PAL] = { /* TEMIC PAL */
- .name = "Temic PAL* auto (4006 FN5)",
- .params = tuner_temic_4006fn5_multi_params,
- .count = ARRAY_SIZE(tuner_temic_4006fn5_multi_params),
- },
-
- /* 20-29 */
- [TUNER_TEMIC_4009FR5_PAL] = { /* TEMIC PAL */
- .name = "Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)",
- .params = tuner_temic_4009f_5_params,
- .count = ARRAY_SIZE(tuner_temic_4009f_5_params),
- },
- [TUNER_TEMIC_4039FR5_NTSC] = { /* TEMIC NTSC */
- .name = "Temic NTSC (4039 FR5)",
- .params = tuner_temic_4039fr5_params,
- .count = ARRAY_SIZE(tuner_temic_4039fr5_params),
- },
- [TUNER_TEMIC_4046FM5] = { /* TEMIC PAL */
- .name = "Temic PAL/SECAM multi (4046 FM5)",
- .params = tuner_temic_4046fm5_params,
- .count = ARRAY_SIZE(tuner_temic_4046fm5_params),
- },
- [TUNER_PHILIPS_PAL_DK] = { /* Philips PAL */
- .name = "Philips PAL_DK (FI1256 and compatibles)",
- .params = tuner_philips_pal_dk_params,
- .count = ARRAY_SIZE(tuner_philips_pal_dk_params),
- },
- [TUNER_PHILIPS_FQ1216ME] = { /* Philips PAL */
- .name = "Philips PAL/SECAM multi (FQ1216ME)",
- .params = tuner_philips_fq1216me_params,
- .count = ARRAY_SIZE(tuner_philips_fq1216me_params),
- },
- [TUNER_LG_PAL_I_FM] = { /* LGINNOTEK PAL_I */
- .name = "LG PAL_I+FM (TAPC-I001D)",
- .params = tuner_lg_pal_i_fm_params,
- .count = ARRAY_SIZE(tuner_lg_pal_i_fm_params),
- },
- [TUNER_LG_PAL_I] = { /* LGINNOTEK PAL_I */
- .name = "LG PAL_I (TAPC-I701D)",
- .params = tuner_lg_pal_i_params,
- .count = ARRAY_SIZE(tuner_lg_pal_i_params),
- },
- [TUNER_LG_NTSC_FM] = { /* LGINNOTEK NTSC */
- .name = "LG NTSC+FM (TPI8NSR01F)",
- .params = tuner_lg_ntsc_fm_params,
- .count = ARRAY_SIZE(tuner_lg_ntsc_fm_params),
- },
- [TUNER_LG_PAL_FM] = { /* LGINNOTEK PAL */
- .name = "LG PAL_BG+FM (TPI8PSB01D)",
- .params = tuner_lg_pal_fm_params,
- .count = ARRAY_SIZE(tuner_lg_pal_fm_params),
- },
- [TUNER_LG_PAL] = { /* LGINNOTEK PAL */
- .name = "LG PAL_BG (TPI8PSB11D)",
- .params = tuner_lg_pal_params,
- .count = ARRAY_SIZE(tuner_lg_pal_params),
- },
-
- /* 30-39 */
- [TUNER_TEMIC_4009FN5_MULTI_PAL_FM] = { /* TEMIC PAL */
- .name = "Temic PAL* auto + FM (4009 FN5)",
- .params = tuner_temic_4009_fn5_multi_pal_fm_params,
- .count = ARRAY_SIZE(tuner_temic_4009_fn5_multi_pal_fm_params),
- },
- [TUNER_SHARP_2U5JF5540_NTSC] = { /* SHARP NTSC */
- .name = "SHARP NTSC_JP (2U5JF5540)",
- .params = tuner_sharp_2u5jf5540_params,
- .count = ARRAY_SIZE(tuner_sharp_2u5jf5540_params),
- },
- [TUNER_Samsung_PAL_TCPM9091PD27] = { /* Samsung PAL */
- .name = "Samsung PAL TCPM9091PD27",
- .params = tuner_samsung_pal_tcpm9091pd27_params,
- .count = ARRAY_SIZE(tuner_samsung_pal_tcpm9091pd27_params),
- },
- [TUNER_MT2032] = { /* Microtune PAL|NTSC */
- .name = "MT20xx universal",
- /* see mt20xx.c for details */ },
- [TUNER_TEMIC_4106FH5] = { /* TEMIC PAL */
- .name = "Temic PAL_BG (4106 FH5)",
- .params = tuner_temic_4106fh5_params,
- .count = ARRAY_SIZE(tuner_temic_4106fh5_params),
- },
- [TUNER_TEMIC_4012FY5] = { /* TEMIC PAL */
- .name = "Temic PAL_DK/SECAM_L (4012 FY5)",
- .params = tuner_temic_4012fy5_params,
- .count = ARRAY_SIZE(tuner_temic_4012fy5_params),
- },
- [TUNER_TEMIC_4136FY5] = { /* TEMIC NTSC */
- .name = "Temic NTSC (4136 FY5)",
- .params = tuner_temic_4136_fy5_params,
- .count = ARRAY_SIZE(tuner_temic_4136_fy5_params),
- },
- [TUNER_LG_PAL_NEW_TAPC] = { /* LGINNOTEK PAL */
- .name = "LG PAL (newer TAPC series)",
- .params = tuner_lg_pal_new_tapc_params,
- .count = ARRAY_SIZE(tuner_lg_pal_new_tapc_params),
- },
- [TUNER_PHILIPS_FM1216ME_MK3] = { /* Philips PAL */
- .name = "Philips PAL/SECAM multi (FM1216ME MK3)",
- .params = tuner_fm1216me_mk3_params,
- .count = ARRAY_SIZE(tuner_fm1216me_mk3_params),
- },
- [TUNER_LG_NTSC_NEW_TAPC] = { /* LGINNOTEK NTSC */
- .name = "LG NTSC (newer TAPC series)",
- .params = tuner_lg_ntsc_new_tapc_params,
- .count = ARRAY_SIZE(tuner_lg_ntsc_new_tapc_params),
- },
-
- /* 40-49 */
- [TUNER_HITACHI_NTSC] = { /* HITACHI NTSC */
- .name = "HITACHI V7-J180AT",
- .params = tuner_hitachi_ntsc_params,
- .count = ARRAY_SIZE(tuner_hitachi_ntsc_params),
- },
- [TUNER_PHILIPS_PAL_MK] = { /* Philips PAL */
- .name = "Philips PAL_MK (FI1216 MK)",
- .params = tuner_philips_pal_mk_params,
- .count = ARRAY_SIZE(tuner_philips_pal_mk_params),
- },
- [TUNER_PHILIPS_FCV1236D] = { /* Philips ATSC */
- .name = "Philips FCV1236D ATSC/NTSC dual in",
- .params = tuner_philips_fcv1236d_params,
- .count = ARRAY_SIZE(tuner_philips_fcv1236d_params),
- .min = 16 * 53.00,
- .max = 16 * 803.00,
- .stepsize = 62500,
- },
- [TUNER_PHILIPS_FM1236_MK3] = { /* Philips NTSC */
- .name = "Philips NTSC MK3 (FM1236MK3 or FM1236/F)",
- .params = tuner_fm1236_mk3_params,
- .count = ARRAY_SIZE(tuner_fm1236_mk3_params),
- },
- [TUNER_PHILIPS_4IN1] = { /* Philips NTSC */
- .name = "Philips 4 in 1 (ATI TV Wonder Pro/Conexant)",
- .params = tuner_philips_4in1_params,
- .count = ARRAY_SIZE(tuner_philips_4in1_params),
- },
- [TUNER_MICROTUNE_4049FM5] = { /* Microtune PAL */
- .name = "Microtune 4049 FM5",
- .params = tuner_microtune_4049_fm5_params,
- .count = ARRAY_SIZE(tuner_microtune_4049_fm5_params),
- },
- [TUNER_PANASONIC_VP27] = { /* Panasonic NTSC */
- .name = "Panasonic VP27s/ENGE4324D",
- .params = tuner_panasonic_vp27_params,
- .count = ARRAY_SIZE(tuner_panasonic_vp27_params),
- },
- [TUNER_LG_NTSC_TAPE] = { /* LGINNOTEK NTSC */
- .name = "LG NTSC (TAPE series)",
- .params = tuner_fm1236_mk3_params,
- .count = ARRAY_SIZE(tuner_fm1236_mk3_params),
- },
- [TUNER_TNF_8831BGFF] = { /* Philips PAL */
- .name = "Tenna TNF 8831 BGFF)",
- .params = tuner_tnf_8831bgff_params,
- .count = ARRAY_SIZE(tuner_tnf_8831bgff_params),
- },
- [TUNER_MICROTUNE_4042FI5] = { /* Microtune NTSC */
- .name = "Microtune 4042 FI5 ATSC/NTSC dual in",
- .params = tuner_microtune_4042fi5_params,
- .count = ARRAY_SIZE(tuner_microtune_4042fi5_params),
- .min = 16 * 57.00,
- .max = 16 * 858.00,
- .stepsize = 62500,
- },
-
- /* 50-59 */
- [TUNER_TCL_2002N] = { /* TCL NTSC */
- .name = "TCL 2002N",
- .params = tuner_tcl_2002n_params,
- .count = ARRAY_SIZE(tuner_tcl_2002n_params),
- },
- [TUNER_PHILIPS_FM1256_IH3] = { /* Philips PAL */
- .name = "Philips PAL/SECAM_D (FM 1256 I-H3)",
- .params = tuner_philips_fm1256_ih3_params,
- .count = ARRAY_SIZE(tuner_philips_fm1256_ih3_params),
- },
- [TUNER_THOMSON_DTT7610] = { /* THOMSON ATSC */
- .name = "Thomson DTT 7610 (ATSC/NTSC)",
- .params = tuner_thomson_dtt7610_params,
- .count = ARRAY_SIZE(tuner_thomson_dtt7610_params),
- .min = 16 * 44.00,
- .max = 16 * 958.00,
- .stepsize = 62500,
- },
- [TUNER_PHILIPS_FQ1286] = { /* Philips NTSC */
- .name = "Philips FQ1286",
- .params = tuner_philips_fq1286_params,
- .count = ARRAY_SIZE(tuner_philips_fq1286_params),
- },
- [TUNER_PHILIPS_TDA8290] = { /* Philips PAL|NTSC */
- .name = "Philips/NXP TDA 8290/8295 + 8275/8275A/18271",
- /* see tda8290.c for details */ },
- [TUNER_TCL_2002MB] = { /* TCL PAL */
- .name = "TCL 2002MB",
- .params = tuner_tcl_2002mb_params,
- .count = ARRAY_SIZE(tuner_tcl_2002mb_params),
- },
- [TUNER_PHILIPS_FQ1216AME_MK4] = { /* Philips PAL */
- .name = "Philips PAL/SECAM multi (FQ1216AME MK4)",
- .params = tuner_philips_fq1216ame_mk4_params,
- .count = ARRAY_SIZE(tuner_philips_fq1216ame_mk4_params),
- },
- [TUNER_PHILIPS_FQ1236A_MK4] = { /* Philips NTSC */
- .name = "Philips FQ1236A MK4",
- .params = tuner_philips_fq1236a_mk4_params,
- .count = ARRAY_SIZE(tuner_philips_fq1236a_mk4_params),
- },
- [TUNER_YMEC_TVF_8531MF] = { /* Philips NTSC */
- .name = "Ymec TVision TVF-8531MF/8831MF/8731MF",
- .params = tuner_ymec_tvf_8531mf_params,
- .count = ARRAY_SIZE(tuner_ymec_tvf_8531mf_params),
- },
- [TUNER_YMEC_TVF_5533MF] = { /* Philips NTSC */
- .name = "Ymec TVision TVF-5533MF",
- .params = tuner_ymec_tvf_5533mf_params,
- .count = ARRAY_SIZE(tuner_ymec_tvf_5533mf_params),
- },
-
- /* 60-69 */
- [TUNER_THOMSON_DTT761X] = { /* THOMSON ATSC */
- /* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */
- .name = "Thomson DTT 761X (ATSC/NTSC)",
- .params = tuner_thomson_dtt761x_params,
- .count = ARRAY_SIZE(tuner_thomson_dtt761x_params),
- .min = 16 * 57.00,
- .max = 16 * 863.00,
- .stepsize = 62500,
- .initdata = tua603x_agc103,
- },
- [TUNER_TENA_9533_DI] = { /* Philips PAL */
- .name = "Tena TNF9533-D/IF/TNF9533-B/DF",
- .params = tuner_tena_9533_di_params,
- .count = ARRAY_SIZE(tuner_tena_9533_di_params),
- },
- [TUNER_TEA5767] = { /* Philips RADIO */
- .name = "Philips TEA5767HN FM Radio",
- /* see tea5767.c for details */
- },
- [TUNER_PHILIPS_FMD1216ME_MK3] = { /* Philips PAL */
- .name = "Philips FMD1216ME MK3 Hybrid Tuner",
- .params = tuner_philips_fmd1216me_mk3_params,
- .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_params),
- .min = 16 * 50.87,
- .max = 16 * 858.00,
- .stepsize = 166667,
- .initdata = tua603x_agc112,
- .sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 },
- },
- [TUNER_LG_TDVS_H06XF] = { /* LGINNOTEK ATSC */
- .name = "LG TDVS-H06xF", /* H061F, H062F & H064F */
- .params = tuner_lg_tdvs_h06xf_params,
- .count = ARRAY_SIZE(tuner_lg_tdvs_h06xf_params),
- .min = 16 * 54.00,
- .max = 16 * 863.00,
- .stepsize = 62500,
- .initdata = tua603x_agc103,
- },
- [TUNER_YMEC_TVF66T5_B_DFF] = { /* Philips PAL */
- .name = "Ymec TVF66T5-B/DFF",
- .params = tuner_ymec_tvf66t5_b_dff_params,
- .count = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_params),
- },
- [TUNER_LG_TALN] = { /* LGINNOTEK NTSC / PAL / SECAM */
- .name = "LG TALN series",
- .params = tuner_lg_taln_params,
- .count = ARRAY_SIZE(tuner_lg_taln_params),
- },
- [TUNER_PHILIPS_TD1316] = { /* Philips PAL */
- .name = "Philips TD1316 Hybrid Tuner",
- .params = tuner_philips_td1316_params,
- .count = ARRAY_SIZE(tuner_philips_td1316_params),
- .min = 16 * 87.00,
- .max = 16 * 895.00,
- .stepsize = 166667,
- },
- [TUNER_PHILIPS_TUV1236D] = { /* Philips ATSC */
- .name = "Philips TUV1236D ATSC/NTSC dual in",
- .params = tuner_tuv1236d_params,
- .count = ARRAY_SIZE(tuner_tuv1236d_params),
- .min = 16 * 54.00,
- .max = 16 * 864.00,
- .stepsize = 62500,
- },
- [TUNER_TNF_5335MF] = { /* Tenna PAL/NTSC */
- .name = "Tena TNF 5335 and similar models",
- .params = tuner_tnf_5335mf_params,
- .count = ARRAY_SIZE(tuner_tnf_5335mf_params),
- },
-
- /* 70-79 */
- [TUNER_SAMSUNG_TCPN_2121P30A] = { /* Samsung NTSC */
- .name = "Samsung TCPN 2121P30A",
- .params = tuner_samsung_tcpn_2121p30a_params,
- .count = ARRAY_SIZE(tuner_samsung_tcpn_2121p30a_params),
- },
- [TUNER_XC2028] = { /* Xceive 2028 */
- .name = "Xceive xc2028/xc3028 tuner",
- /* see tuner-xc2028.c for details */
- },
- [TUNER_THOMSON_FE6600] = { /* Thomson PAL / DVB-T */
- .name = "Thomson FE6600",
- .params = tuner_thomson_fe6600_params,
- .count = ARRAY_SIZE(tuner_thomson_fe6600_params),
- .min = 16 * 44.25,
- .max = 16 * 858.00,
- .stepsize = 166667,
- },
- [TUNER_SAMSUNG_TCPG_6121P30A] = { /* Samsung PAL */
- .name = "Samsung TCPG 6121P30A",
- .params = tuner_samsung_tcpg_6121p30a_params,
- .count = ARRAY_SIZE(tuner_samsung_tcpg_6121p30a_params),
- },
- [TUNER_TDA9887] = { /* Philips TDA 9887 IF PLL Demodulator.
- This chip is part of some modern tuners */
- .name = "Philips TDA988[5,6,7] IF PLL Demodulator",
- /* see tda9887.c for details */
- },
- [TUNER_TEA5761] = { /* Philips RADIO */
- .name = "Philips TEA5761 FM Radio",
- /* see tea5767.c for details */
- },
- [TUNER_XC5000] = { /* Xceive 5000 */
- .name = "Xceive 5000 tuner",
- /* see xc5000.c for details */
- },
- [TUNER_XC4000] = { /* Xceive 4000 */
- .name = "Xceive 4000 tuner",
- /* see xc4000.c for details */
- },
- [TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */
- .name = "TCL tuner MF02GIP-5N-E",
- .params = tuner_tcl_mf02gip_5n_params,
- .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_params),
- },
- [TUNER_PHILIPS_FMD1216MEX_MK3] = { /* Philips PAL */
- .name = "Philips FMD1216MEX MK3 Hybrid Tuner",
- .params = tuner_philips_fmd1216mex_mk3_params,
- .count = ARRAY_SIZE(tuner_philips_fmd1216mex_mk3_params),
- .min = 16 * 50.87,
- .max = 16 * 858.00,
- .stepsize = 166667,
- .initdata = tua603x_agc112,
- .sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 },
- },
- [TUNER_PHILIPS_FM1216MK5] = { /* Philips PAL */
- .name = "Philips PAL/SECAM multi (FM1216 MK5)",
- .params = tuner_fm1216mk5_params,
- .count = ARRAY_SIZE(tuner_fm1216mk5_params),
- },
-
- /* 80-89 */
- [TUNER_PHILIPS_FQ1216LME_MK3] = { /* PAL/SECAM, Loop-thru, no FM */
- .name = "Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough",
- .params = tuner_fq1216lme_mk3_params,
- .count = ARRAY_SIZE(tuner_fq1216lme_mk3_params),
- },
-
- [TUNER_PARTSNIC_PTI_5NF05] = {
- .name = "Partsnic (Daewoo) PTI-5NF05",
- .params = tuner_partsnic_pti_5nf05_params,
- .count = ARRAY_SIZE(tuner_partsnic_pti_5nf05_params),
- },
- [TUNER_PHILIPS_CU1216L] = {
- .name = "Philips CU1216L",
- .params = tuner_philips_cu1216l_params,
- .count = ARRAY_SIZE(tuner_philips_cu1216l_params),
- .stepsize = 62500,
- },
- [TUNER_NXP_TDA18271] = {
- .name = "NXP TDA18271",
- /* see tda18271-fe.c for details */
- },
- [TUNER_SONY_BTF_PXN01Z] = {
- .name = "Sony BTF-Pxn01Z",
- .params = tuner_sony_btf_pxn01z_params,
- .count = ARRAY_SIZE(tuner_sony_btf_pxn01z_params),
- },
- [TUNER_PHILIPS_FQ1236_MK5] = { /* NTSC, TDA9885, no FM radio */
- .name = "Philips FQ1236 MK5",
- .params = tuner_philips_fq1236_mk5_params,
- .count = ARRAY_SIZE(tuner_philips_fq1236_mk5_params),
- },
- [TUNER_TENA_TNF_5337] = { /* Tena 5337 MFD */
- .name = "Tena TNF5337 MFD",
- .params = tuner_tena_tnf_5337_params,
- .count = ARRAY_SIZE(tuner_tena_tnf_5337_params),
- },
- [TUNER_XC5000C] = { /* Xceive 5000C */
- .name = "Xceive 5000C tuner",
- /* see xc5000.c for details */
- },
-};
-EXPORT_SYMBOL(tuners);
-
-unsigned const int tuner_count = ARRAY_SIZE(tuners);
-EXPORT_SYMBOL(tuner_count);
-
-MODULE_DESCRIPTION("Simple tuner device type database");
-MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/tuner-xc2028-types.h b/drivers/media/common/tuners/tuner-xc2028-types.h
deleted file mode 100644
index 74dc46a..0000000
--- a/drivers/media/common/tuners/tuner-xc2028-types.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* tuner-xc2028_types
- *
- * This file includes internal tipes to be used inside tuner-xc2028.
- * Shouldn't be included outside tuner-xc2028
- *
- * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org)
- * This code is placed under the terms of the GNU General Public License v2
- */
-
-/* xc3028 firmware types */
-
-/* BASE firmware should be loaded before any other firmware */
-#define BASE (1<<0)
-#define BASE_TYPES (BASE|F8MHZ|MTS|FM|INPUT1|INPUT2|INIT1)
-
-/* F8MHZ marks BASE firmwares for 8 MHz Bandwidth */
-#define F8MHZ (1<<1)
-
-/* Multichannel Television Sound (MTS)
- Those firmwares are capable of using xc2038 DSP to decode audio and
- produce a baseband audio output on some pins of the chip.
- There are MTS firmwares for the most used video standards. It should be
- required to use MTS firmwares, depending on the way audio is routed into
- the bridge chip
- */
-#define MTS (1<<2)
-
-/* FIXME: I have no idea what's the difference between
- D2620 and D2633 firmwares
- */
-#define D2620 (1<<3)
-#define D2633 (1<<4)
-
-/* DTV firmwares for 6, 7 and 8 MHz
- DTV6 - 6MHz - ATSC/DVB-C/DVB-T/ISDB-T/DOCSIS
- DTV8 - 8MHz - DVB-C/DVB-T
- */
-#define DTV6 (1 << 5)
-#define QAM (1 << 6)
-#define DTV7 (1<<7)
-#define DTV78 (1<<8)
-#define DTV8 (1<<9)
-
-#define DTV_TYPES (D2620|D2633|DTV6|QAM|DTV7|DTV78|DTV8|ATSC)
-
-/* There's a FM | BASE firmware + FM specific firmware (std=0) */
-#define FM (1<<10)
-
-#define STD_SPECIFIC_TYPES (MTS|FM|LCD|NOGD)
-
-/* Applies only for FM firmware
- Makes it use RF input 1 (pin #2) instead of input 2 (pin #4)
- */
-#define INPUT1 (1<<11)
-
-
-/* LCD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
- and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
- There are variants both with and without NOGD
- Those firmwares produce better result with LCD displays
- */
-#define LCD (1<<12)
-
-/* NOGD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
- and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
- The NOGD firmwares don't have group delay compensation filter
- */
-#define NOGD (1<<13)
-
-/* Old firmwares were broken into init0 and init1 */
-#define INIT1 (1<<14)
-
-/* SCODE firmware selects particular behaviours */
-#define MONO (1 << 15)
-#define ATSC (1 << 16)
-#define IF (1 << 17)
-#define LG60 (1 << 18)
-#define ATI638 (1 << 19)
-#define OREN538 (1 << 20)
-#define OREN36 (1 << 21)
-#define TOYOTA388 (1 << 22)
-#define TOYOTA794 (1 << 23)
-#define DIBCOM52 (1 << 24)
-#define ZARLINK456 (1 << 25)
-#define CHINA (1 << 26)
-#define F6MHZ (1 << 27)
-#define INPUT2 (1 << 28)
-#define SCODE (1 << 29)
-
-/* This flag identifies that the scode table has a new format */
-#define HAS_IF (1 << 30)
-
-/* There are different scode tables for MTS and non-MTS.
- The MTS firmwares support mono only
- */
-#define SCODE_TYPES (SCODE | MTS)
-
-
-/* Newer types not defined on videodev2.h.
- The original idea were to move all those types to videodev2.h, but
- it seemed overkill, since, with the exception of SECAM/K3, the other
- types seem to be autodetected.
- It is not clear where secam/k3 is used, nor we have a feedback of this
- working or being autodetected by the standard secam firmware.
- */
-
-#define V4L2_STD_SECAM_K3 (0x04000000)
-
-/* Audio types */
-
-#define V4L2_STD_A2_A (1LL<<32)
-#define V4L2_STD_A2_B (1LL<<33)
-#define V4L2_STD_NICAM_A (1LL<<34)
-#define V4L2_STD_NICAM_B (1LL<<35)
-#define V4L2_STD_AM (1LL<<36)
-#define V4L2_STD_BTSC (1LL<<37)
-#define V4L2_STD_EIAJ (1LL<<38)
-
-#define V4L2_STD_A2 (V4L2_STD_A2_A | V4L2_STD_A2_B)
-#define V4L2_STD_NICAM (V4L2_STD_NICAM_A | V4L2_STD_NICAM_B)
-
-/* To preserve backward compatibilty,
- (std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported
- */
-
-#define V4L2_STD_AUDIO (V4L2_STD_A2 | \
- V4L2_STD_NICAM | \
- V4L2_STD_AM | \
- V4L2_STD_BTSC | \
- V4L2_STD_EIAJ)
-
-/* Used standards with audio restrictions */
-
-#define V4L2_STD_PAL_BG_A2_A (V4L2_STD_PAL_BG | V4L2_STD_A2_A)
-#define V4L2_STD_PAL_BG_A2_B (V4L2_STD_PAL_BG | V4L2_STD_A2_B)
-#define V4L2_STD_PAL_BG_NICAM_A (V4L2_STD_PAL_BG | V4L2_STD_NICAM_A)
-#define V4L2_STD_PAL_BG_NICAM_B (V4L2_STD_PAL_BG | V4L2_STD_NICAM_B)
-#define V4L2_STD_PAL_DK_A2 (V4L2_STD_PAL_DK | V4L2_STD_A2)
-#define V4L2_STD_PAL_DK_NICAM (V4L2_STD_PAL_DK | V4L2_STD_NICAM)
-#define V4L2_STD_SECAM_L_NICAM (V4L2_STD_SECAM_L | V4L2_STD_NICAM)
-#define V4L2_STD_SECAM_L_AM (V4L2_STD_SECAM_L | V4L2_STD_AM)
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
deleted file mode 100644
index 7bcb6b0..0000000
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ /dev/null
@@ -1,1509 +0,0 @@
-/* tuner-xc2028
- *
- * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org)
- *
- * Copyright (c) 2007 Michel Ludwig (michel.ludwig@gmail.com)
- * - frontend interface
- *
- * This code is placed under the terms of the GNU General Public License v2
- */
-
-#include <linux/i2c.h>
-#include <asm/div64.h>
-#include <linux/firmware.h>
-#include <linux/videodev2.h>
-#include <linux/delay.h>
-#include <media/tuner.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <asm/unaligned.h>
-#include "tuner-i2c.h"
-#include "tuner-xc2028.h"
-#include "tuner-xc2028-types.h"
-
-#include <linux/dvb/frontend.h>
-#include "dvb_frontend.h"
-
-/* Registers (Write-only) */
-#define XREG_INIT 0x00
-#define XREG_RF_FREQ 0x02
-#define XREG_POWER_DOWN 0x08
-
-/* Registers (Read-only) */
-#define XREG_FREQ_ERROR 0x01
-#define XREG_LOCK 0x02
-#define XREG_VERSION 0x04
-#define XREG_PRODUCT_ID 0x08
-#define XREG_HSYNC_FREQ 0x10
-#define XREG_FRAME_LINES 0x20
-#define XREG_SNR 0x40
-
-#define XREG_ADC_ENV 0x0100
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
-static int no_poweroff;
-module_param(no_poweroff, int, 0644);
-MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n"
- "1 keep device energized and with tuner ready all the times.\n"
- " Faster, but consumes more power and keeps the device hotter\n");
-
-static char audio_std[8];
-module_param_string(audio_std, audio_std, sizeof(audio_std), 0);
-MODULE_PARM_DESC(audio_std,
- "Audio standard. XC3028 audio decoder explicitly "
- "needs to know what audio\n"
- "standard is needed for some video standards with audio A2 or NICAM.\n"
- "The valid values are:\n"
- "A2\n"
- "A2/A\n"
- "A2/B\n"
- "NICAM\n"
- "NICAM/A\n"
- "NICAM/B\n");
-
-static char firmware_name[30];
-module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0);
-MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
- "default firmware name\n");
-
-static LIST_HEAD(hybrid_tuner_instance_list);
-static DEFINE_MUTEX(xc2028_list_mutex);
-
-/* struct for storing firmware table */
-struct firmware_description {
- unsigned int type;
- v4l2_std_id id;
- __u16 int_freq;
- unsigned char *ptr;
- unsigned int size;
-};
-
-struct firmware_properties {
- unsigned int type;
- v4l2_std_id id;
- v4l2_std_id std_req;
- __u16 int_freq;
- unsigned int scode_table;
- int scode_nr;
-};
-
-enum xc2028_state {
- XC2028_NO_FIRMWARE = 0,
- XC2028_WAITING_FIRMWARE,
- XC2028_ACTIVE,
- XC2028_SLEEP,
- XC2028_NODEV,
-};
-
-struct xc2028_data {
- struct list_head hybrid_tuner_instance_list;
- struct tuner_i2c_props i2c_props;
- __u32 frequency;
-
- enum xc2028_state state;
- const char *fname;
-
- struct firmware_description *firm;
- int firm_size;
- __u16 firm_version;
-
- __u16 hwmodel;
- __u16 hwvers;
-
- struct xc2028_ctrl ctrl;
-
- struct firmware_properties cur_fw;
-
- struct mutex lock;
-};
-
-#define i2c_send(priv, buf, size) ({ \
- int _rc; \
- _rc = tuner_i2c_xfer_send(&priv->i2c_props, buf, size); \
- if (size != _rc) \
- tuner_info("i2c output error: rc = %d (should be %d)\n",\
- _rc, (int)size); \
- if (priv->ctrl.msleep) \
- msleep(priv->ctrl.msleep); \
- _rc; \
-})
-
-#define i2c_rcv(priv, buf, size) ({ \
- int _rc; \
- _rc = tuner_i2c_xfer_recv(&priv->i2c_props, buf, size); \
- if (size != _rc) \
- tuner_err("i2c input error: rc = %d (should be %d)\n", \
- _rc, (int)size); \
- _rc; \
-})
-
-#define i2c_send_recv(priv, obuf, osize, ibuf, isize) ({ \
- int _rc; \
- _rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, obuf, osize, \
- ibuf, isize); \
- if (isize != _rc) \
- tuner_err("i2c input error: rc = %d (should be %d)\n", \
- _rc, (int)isize); \
- if (priv->ctrl.msleep) \
- msleep(priv->ctrl.msleep); \
- _rc; \
-})
-
-#define send_seq(priv, data...) ({ \
- static u8 _val[] = data; \
- int _rc; \
- if (sizeof(_val) != \
- (_rc = tuner_i2c_xfer_send(&priv->i2c_props, \
- _val, sizeof(_val)))) { \
- tuner_err("Error on line %d: %d\n", __LINE__, _rc); \
- } else if (priv->ctrl.msleep) \
- msleep(priv->ctrl.msleep); \
- _rc; \
-})
-
-static int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val)
-{
- unsigned char buf[2];
- unsigned char ibuf[2];
-
- tuner_dbg("%s %04x called\n", __func__, reg);
-
- buf[0] = reg >> 8;
- buf[1] = (unsigned char) reg;
-
- if (i2c_send_recv(priv, buf, 2, ibuf, 2) != 2)
- return -EIO;
-
- *val = (ibuf[1]) | (ibuf[0] << 8);
- return 0;
-}
-
-#define dump_firm_type(t) dump_firm_type_and_int_freq(t, 0)
-static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq)
-{
- if (type & BASE)
- printk("BASE ");
- if (type & INIT1)
- printk("INIT1 ");
- if (type & F8MHZ)
- printk("F8MHZ ");
- if (type & MTS)
- printk("MTS ");
- if (type & D2620)
- printk("D2620 ");
- if (type & D2633)
- printk("D2633 ");
- if (type & DTV6)
- printk("DTV6 ");
- if (type & QAM)
- printk("QAM ");
- if (type & DTV7)
- printk("DTV7 ");
- if (type & DTV78)
- printk("DTV78 ");
- if (type & DTV8)
- printk("DTV8 ");
- if (type & FM)
- printk("FM ");
- if (type & INPUT1)
- printk("INPUT1 ");
- if (type & LCD)
- printk("LCD ");
- if (type & NOGD)
- printk("NOGD ");
- if (type & MONO)
- printk("MONO ");
- if (type & ATSC)
- printk("ATSC ");
- if (type & IF)
- printk("IF ");
- if (type & LG60)
- printk("LG60 ");
- if (type & ATI638)
- printk("ATI638 ");
- if (type & OREN538)
- printk("OREN538 ");
- if (type & OREN36)
- printk("OREN36 ");
- if (type & TOYOTA388)
- printk("TOYOTA388 ");
- if (type & TOYOTA794)
- printk("TOYOTA794 ");
- if (type & DIBCOM52)
- printk("DIBCOM52 ");
- if (type & ZARLINK456)
- printk("ZARLINK456 ");
- if (type & CHINA)
- printk("CHINA ");
- if (type & F6MHZ)
- printk("F6MHZ ");
- if (type & INPUT2)
- printk("INPUT2 ");
- if (type & SCODE)
- printk("SCODE ");
- if (type & HAS_IF)
- printk("HAS_IF_%d ", int_freq);
-}
-
-static v4l2_std_id parse_audio_std_option(void)
-{
- if (strcasecmp(audio_std, "A2") == 0)
- return V4L2_STD_A2;
- if (strcasecmp(audio_std, "A2/A") == 0)
- return V4L2_STD_A2_A;
- if (strcasecmp(audio_std, "A2/B") == 0)
- return V4L2_STD_A2_B;
- if (strcasecmp(audio_std, "NICAM") == 0)
- return V4L2_STD_NICAM;
- if (strcasecmp(audio_std, "NICAM/A") == 0)
- return V4L2_STD_NICAM_A;
- if (strcasecmp(audio_std, "NICAM/B") == 0)
- return V4L2_STD_NICAM_B;
-
- return 0;
-}
-
-static int check_device_status(struct xc2028_data *priv)
-{
- switch (priv->state) {
- case XC2028_NO_FIRMWARE:
- case XC2028_WAITING_FIRMWARE:
- return -EAGAIN;
- case XC2028_ACTIVE:
- case XC2028_SLEEP:
- return 0;
- case XC2028_NODEV:
- return -ENODEV;
- }
- return 0;
-}
-
-static void free_firmware(struct xc2028_data *priv)
-{
- int i;
- tuner_dbg("%s called\n", __func__);
-
- if (!priv->firm)
- return;
-
- for (i = 0; i < priv->firm_size; i++)
- kfree(priv->firm[i].ptr);
-
- kfree(priv->firm);
-
- priv->firm = NULL;
- priv->firm_size = 0;
- priv->state = XC2028_NO_FIRMWARE;
-
- memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
-}
-
-static int load_all_firmwares(struct dvb_frontend *fe,
- const struct firmware *fw)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- const unsigned char *p, *endp;
- int rc = 0;
- int n, n_array;
- char name[33];
-
- tuner_dbg("%s called\n", __func__);
-
- p = fw->data;
- endp = p + fw->size;
-
- if (fw->size < sizeof(name) - 1 + 2 + 2) {
- tuner_err("Error: firmware file %s has invalid size!\n",
- priv->fname);
- goto corrupt;
- }
-
- memcpy(name, p, sizeof(name) - 1);
- name[sizeof(name) - 1] = 0;
- p += sizeof(name) - 1;
-
- priv->firm_version = get_unaligned_le16(p);
- p += 2;
-
- n_array = get_unaligned_le16(p);
- p += 2;
-
- tuner_info("Loading %d firmware images from %s, type: %s, ver %d.%d\n",
- n_array, priv->fname, name,
- priv->firm_version >> 8, priv->firm_version & 0xff);
-
- priv->firm = kcalloc(n_array, sizeof(*priv->firm), GFP_KERNEL);
- if (priv->firm == NULL) {
- tuner_err("Not enough memory to load firmware file.\n");
- rc = -ENOMEM;
- goto err;
- }
- priv->firm_size = n_array;
-
- n = -1;
- while (p < endp) {
- __u32 type, size;
- v4l2_std_id id;
- __u16 int_freq = 0;
-
- n++;
- if (n >= n_array) {
- tuner_err("More firmware images in file than "
- "were expected!\n");
- goto corrupt;
- }
-
- /* Checks if there's enough bytes to read */
- if (endp - p < sizeof(type) + sizeof(id) + sizeof(size))
- goto header;
-
- type = get_unaligned_le32(p);
- p += sizeof(type);
-
- id = get_unaligned_le64(p);
- p += sizeof(id);
-
- if (type & HAS_IF) {
- int_freq = get_unaligned_le16(p);
- p += sizeof(int_freq);
- if (endp - p < sizeof(size))
- goto header;
- }
-
- size = get_unaligned_le32(p);
- p += sizeof(size);
-
- if (!size || size > endp - p) {
- tuner_err("Firmware type ");
- dump_firm_type(type);
- printk("(%x), id %llx is corrupted "
- "(size=%d, expected %d)\n",
- type, (unsigned long long)id,
- (unsigned)(endp - p), size);
- goto corrupt;
- }
-
- priv->firm[n].ptr = kzalloc(size, GFP_KERNEL);
- if (priv->firm[n].ptr == NULL) {
- tuner_err("Not enough memory to load firmware file.\n");
- rc = -ENOMEM;
- goto err;
- }
- tuner_dbg("Reading firmware type ");
- if (debug) {
- dump_firm_type_and_int_freq(type, int_freq);
- printk("(%x), id %llx, size=%d.\n",
- type, (unsigned long long)id, size);
- }
-
- memcpy(priv->firm[n].ptr, p, size);
- priv->firm[n].type = type;
- priv->firm[n].id = id;
- priv->firm[n].size = size;
- priv->firm[n].int_freq = int_freq;
-
- p += size;
- }
-
- if (n + 1 != priv->firm_size) {
- tuner_err("Firmware file is incomplete!\n");
- goto corrupt;
- }
-
- goto done;
-
-header:
- tuner_err("Firmware header is incomplete!\n");
-corrupt:
- rc = -EINVAL;
- tuner_err("Error: firmware file is corrupted!\n");
-
-err:
- tuner_info("Releasing partially loaded firmware file.\n");
- free_firmware(priv);
-
-done:
- if (rc == 0)
- tuner_dbg("Firmware files loaded.\n");
- else
- priv->state = XC2028_NODEV;
-
- return rc;
-}
-
-static int seek_firmware(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id *id)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- int i, best_i = -1, best_nr_matches = 0;
- unsigned int type_mask = 0;
-
- tuner_dbg("%s called, want type=", __func__);
- if (debug) {
- dump_firm_type(type);
- printk("(%x), id %016llx.\n", type, (unsigned long long)*id);
- }
-
- if (!priv->firm) {
- tuner_err("Error! firmware not loaded\n");
- return -EINVAL;
- }
-
- if (((type & ~SCODE) == 0) && (*id == 0))
- *id = V4L2_STD_PAL;
-
- if (type & BASE)
- type_mask = BASE_TYPES;
- else if (type & SCODE) {
- type &= SCODE_TYPES;
- type_mask = SCODE_TYPES & ~HAS_IF;
- } else if (type & DTV_TYPES)
- type_mask = DTV_TYPES;
- else if (type & STD_SPECIFIC_TYPES)
- type_mask = STD_SPECIFIC_TYPES;
-
- type &= type_mask;
-
- if (!(type & SCODE))
- type_mask = ~0;
-
- /* Seek for exact match */
- for (i = 0; i < priv->firm_size; i++) {
- if ((type == (priv->firm[i].type & type_mask)) &&
- (*id == priv->firm[i].id))
- goto found;
- }
-
- /* Seek for generic video standard match */
- for (i = 0; i < priv->firm_size; i++) {
- v4l2_std_id match_mask;
- int nr_matches;
-
- if (type != (priv->firm[i].type & type_mask))
- continue;
-
- match_mask = *id & priv->firm[i].id;
- if (!match_mask)
- continue;
-
- if ((*id & match_mask) == *id)
- goto found; /* Supports all the requested standards */
-
- nr_matches = hweight64(match_mask);
- if (nr_matches > best_nr_matches) {
- best_nr_matches = nr_matches;
- best_i = i;
- }
- }
-
- if (best_nr_matches > 0) {
- tuner_dbg("Selecting best matching firmware (%d bits) for "
- "type=", best_nr_matches);
- dump_firm_type(type);
- printk("(%x), id %016llx:\n", type, (unsigned long long)*id);
- i = best_i;
- goto found;
- }
-
- /*FIXME: Would make sense to seek for type "hint" match ? */
-
- i = -ENOENT;
- goto ret;
-
-found:
- *id = priv->firm[i].id;
-
-ret:
- tuner_dbg("%s firmware for type=", (i < 0) ? "Can't find" : "Found");
- if (debug) {
- dump_firm_type(type);
- printk("(%x), id %016llx.\n", type, (unsigned long long)*id);
- }
- return i;
-}
-
-static inline int do_tuner_callback(struct dvb_frontend *fe, int cmd, int arg)
-{
- struct xc2028_data *priv = fe->tuner_priv;
-
- /* analog side (tuner-core) uses i2c_adap->algo_data.
- * digital side is not guaranteed to have algo_data defined.
- *
- * digital side will always have fe->dvb defined.
- * analog side (tuner-core) doesn't (yet) define fe->dvb.
- */
-
- return (!fe->callback) ? -EINVAL :
- fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
- fe->dvb->priv : priv->i2c_props.adap->algo_data,
- DVB_FRONTEND_COMPONENT_TUNER, cmd, arg);
-}
-
-static int load_firmware(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id *id)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- int pos, rc;
- unsigned char *p, *endp, buf[priv->ctrl.max_len];
-
- tuner_dbg("%s called\n", __func__);
-
- pos = seek_firmware(fe, type, id);
- if (pos < 0)
- return pos;
-
- tuner_info("Loading firmware for type=");
- dump_firm_type(priv->firm[pos].type);
- printk("(%x), id %016llx.\n", priv->firm[pos].type,
- (unsigned long long)*id);
-
- p = priv->firm[pos].ptr;
- endp = p + priv->firm[pos].size;
-
- while (p < endp) {
- __u16 size;
-
- /* Checks if there's enough bytes to read */
- if (p + sizeof(size) > endp) {
- tuner_err("Firmware chunk size is wrong\n");
- return -EINVAL;
- }
-
- size = le16_to_cpu(*(__u16 *) p);
- p += sizeof(size);
-
- if (size == 0xffff)
- return 0;
-
- if (!size) {
- /* Special callback command received */
- rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0);
- if (rc < 0) {
- tuner_err("Error at RESET code %d\n",
- (*p) & 0x7f);
- return -EINVAL;
- }
- continue;
- }
- if (size >= 0xff00) {
- switch (size) {
- case 0xff00:
- rc = do_tuner_callback(fe, XC2028_RESET_CLK, 0);
- if (rc < 0) {
- tuner_err("Error at RESET code %d\n",
- (*p) & 0x7f);
- return -EINVAL;
- }
- break;
- default:
- tuner_info("Invalid RESET code %d\n",
- size & 0x7f);
- return -EINVAL;
-
- }
- continue;
- }
-
- /* Checks for a sleep command */
- if (size & 0x8000) {
- msleep(size & 0x7fff);
- continue;
- }
-
- if ((size + p > endp)) {
- tuner_err("missing bytes: need %d, have %d\n",
- size, (int)(endp - p));
- return -EINVAL;
- }
-
- buf[0] = *p;
- p++;
- size--;
-
- /* Sends message chunks */
- while (size > 0) {
- int len = (size < priv->ctrl.max_len - 1) ?
- size : priv->ctrl.max_len - 1;
-
- memcpy(buf + 1, p, len);
-
- rc = i2c_send(priv, buf, len + 1);
- if (rc < 0) {
- tuner_err("%d returned from send\n", rc);
- return -EINVAL;
- }
-
- p += len;
- size -= len;
- }
-
- /* silently fail if the frontend doesn't support I2C flush */
- rc = do_tuner_callback(fe, XC2028_I2C_FLUSH, 0);
- if ((rc < 0) && (rc != -EINVAL)) {
- tuner_err("error executing flush: %d\n", rc);
- return rc;
- }
- }
- return 0;
-}
-
-static int load_scode(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id *id, __u16 int_freq, int scode)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- int pos, rc;
- unsigned char *p;
-
- tuner_dbg("%s called\n", __func__);
-
- if (!int_freq) {
- pos = seek_firmware(fe, type, id);
- if (pos < 0)
- return pos;
- } else {
- for (pos = 0; pos < priv->firm_size; pos++) {
- if ((priv->firm[pos].int_freq == int_freq) &&
- (priv->firm[pos].type & HAS_IF))
- break;
- }
- if (pos == priv->firm_size)
- return -ENOENT;
- }
-
- p = priv->firm[pos].ptr;
-
- if (priv->firm[pos].type & HAS_IF) {
- if (priv->firm[pos].size != 12 * 16 || scode >= 16)
- return -EINVAL;
- p += 12 * scode;
- } else {
- /* 16 SCODE entries per file; each SCODE entry is 12 bytes and
- * has a 2-byte size header in the firmware format. */
- if (priv->firm[pos].size != 14 * 16 || scode >= 16 ||
- le16_to_cpu(*(__u16 *)(p + 14 * scode)) != 12)
- return -EINVAL;
- p += 14 * scode + 2;
- }
-
- tuner_info("Loading SCODE for type=");
- dump_firm_type_and_int_freq(priv->firm[pos].type,
- priv->firm[pos].int_freq);
- printk("(%x), id %016llx.\n", priv->firm[pos].type,
- (unsigned long long)*id);
-
- if (priv->firm_version < 0x0202)
- rc = send_seq(priv, {0x20, 0x00, 0x00, 0x00});
- else
- rc = send_seq(priv, {0xa0, 0x00, 0x00, 0x00});
- if (rc < 0)
- return -EIO;
-
- rc = i2c_send(priv, p, 12);
- if (rc < 0)
- return -EIO;
-
- rc = send_seq(priv, {0x00, 0x8c});
- if (rc < 0)
- return -EIO;
-
- return 0;
-}
-
-static int check_firmware(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id std, __u16 int_freq)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- struct firmware_properties new_fw;
- int rc, retry_count = 0;
- u16 version, hwmodel;
- v4l2_std_id std0;
-
- tuner_dbg("%s called\n", __func__);
-
- rc = check_device_status(priv);
- if (rc < 0)
- return rc;
-
- if (priv->ctrl.mts && !(type & FM))
- type |= MTS;
-
-retry:
- new_fw.type = type;
- new_fw.id = std;
- new_fw.std_req = std;
- new_fw.scode_table = SCODE | priv->ctrl.scode_table;
- new_fw.scode_nr = 0;
- new_fw.int_freq = int_freq;
-
- tuner_dbg("checking firmware, user requested type=");
- if (debug) {
- dump_firm_type(new_fw.type);
- printk("(%x), id %016llx, ", new_fw.type,
- (unsigned long long)new_fw.std_req);
- if (!int_freq) {
- printk("scode_tbl ");
- dump_firm_type(priv->ctrl.scode_table);
- printk("(%x), ", priv->ctrl.scode_table);
- } else
- printk("int_freq %d, ", new_fw.int_freq);
- printk("scode_nr %d\n", new_fw.scode_nr);
- }
-
- /*
- * No need to reload base firmware if it matches and if the tuner
- * is not at sleep mode
- */
- if ((priv->state == XC2028_ACTIVE) &&
- (((BASE | new_fw.type) & BASE_TYPES) ==
- (priv->cur_fw.type & BASE_TYPES))) {
- tuner_dbg("BASE firmware not changed.\n");
- goto skip_base;
- }
-
- /* Updating BASE - forget about all currently loaded firmware */
- memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
-
- /* Reset is needed before loading firmware */
- rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0);
- if (rc < 0)
- goto fail;
-
- /* BASE firmwares are all std0 */
- std0 = 0;
- rc = load_firmware(fe, BASE | new_fw.type, &std0);
- if (rc < 0) {
- tuner_err("Error %d while loading base firmware\n",
- rc);
- goto fail;
- }
-
- /* Load INIT1, if needed */
- tuner_dbg("Load init1 firmware, if exists\n");
-
- rc = load_firmware(fe, BASE | INIT1 | new_fw.type, &std0);
- if (rc == -ENOENT)
- rc = load_firmware(fe, (BASE | INIT1 | new_fw.type) & ~F8MHZ,
- &std0);
- if (rc < 0 && rc != -ENOENT) {
- tuner_err("Error %d while loading init1 firmware\n",
- rc);
- goto fail;
- }
-
-skip_base:
- /*
- * No need to reload standard specific firmware if base firmware
- * was not reloaded and requested video standards have not changed.
- */
- if (priv->cur_fw.type == (BASE | new_fw.type) &&
- priv->cur_fw.std_req == std) {
- tuner_dbg("Std-specific firmware already loaded.\n");
- goto skip_std_specific;
- }
-
- /* Reloading std-specific firmware forces a SCODE update */
- priv->cur_fw.scode_table = 0;
-
- rc = load_firmware(fe, new_fw.type, &new_fw.id);
- if (rc == -ENOENT)
- rc = load_firmware(fe, new_fw.type & ~F8MHZ, &new_fw.id);
-
- if (rc < 0)
- goto fail;
-
-skip_std_specific:
- if (priv->cur_fw.scode_table == new_fw.scode_table &&
- priv->cur_fw.scode_nr == new_fw.scode_nr) {
- tuner_dbg("SCODE firmware already loaded.\n");
- goto check_device;
- }
-
- if (new_fw.type & FM)
- goto check_device;
-
- /* Load SCODE firmware, if exists */
- tuner_dbg("Trying to load scode %d\n", new_fw.scode_nr);
-
- rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id,
- new_fw.int_freq, new_fw.scode_nr);
-
-check_device:
- if (xc2028_get_reg(priv, 0x0004, &version) < 0 ||
- xc2028_get_reg(priv, 0x0008, &hwmodel) < 0) {
- tuner_err("Unable to read tuner registers.\n");
- goto fail;
- }
-
- tuner_dbg("Device is Xceive %d version %d.%d, "
- "firmware version %d.%d\n",
- hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8,
- (version & 0xf0) >> 4, version & 0xf);
-
-
- if (priv->ctrl.read_not_reliable)
- goto read_not_reliable;
-
- /* Check firmware version against what we downloaded. */
- if (priv->firm_version != ((version & 0xf0) << 4 | (version & 0x0f))) {
- if (!priv->ctrl.read_not_reliable) {
- tuner_err("Incorrect readback of firmware version.\n");
- goto fail;
- } else {
- tuner_err("Returned an incorrect version. However, "
- "read is not reliable enough. Ignoring it.\n");
- hwmodel = 3028;
- }
- }
-
- /* Check that the tuner hardware model remains consistent over time. */
- if (priv->hwmodel == 0 && (hwmodel == 2028 || hwmodel == 3028)) {
- priv->hwmodel = hwmodel;
- priv->hwvers = version & 0xff00;
- } else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel ||
- priv->hwvers != (version & 0xff00)) {
- tuner_err("Read invalid device hardware information - tuner "
- "hung?\n");
- goto fail;
- }
-
-read_not_reliable:
- memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw));
-
- /*
- * By setting BASE in cur_fw.type only after successfully loading all
- * firmwares, we can:
- * 1. Identify that BASE firmware with type=0 has been loaded;
- * 2. Tell whether BASE firmware was just changed the next time through.
- */
- priv->cur_fw.type |= BASE;
- priv->state = XC2028_ACTIVE;
-
- return 0;
-
-fail:
- priv->state = XC2028_SLEEP;
-
- memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
- if (retry_count < 8) {
- msleep(50);
- retry_count++;
- tuner_dbg("Retrying firmware load\n");
- goto retry;
- }
-
- if (rc == -ENOENT)
- rc = -EINVAL;
- return rc;
-}
-
-static int xc2028_signal(struct dvb_frontend *fe, u16 *strength)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- u16 frq_lock, signal = 0;
- int rc, i;
-
- tuner_dbg("%s called\n", __func__);
-
- rc = check_device_status(priv);
- if (rc < 0)
- return rc;
-
- mutex_lock(&priv->lock);
-
- /* Sync Lock Indicator */
- for (i = 0; i < 3; i++) {
- rc = xc2028_get_reg(priv, XREG_LOCK, &frq_lock);
- if (rc < 0)
- goto ret;
-
- if (frq_lock)
- break;
- msleep(6);
- }
-
- /* Frequency didn't lock */
- if (frq_lock == 2)
- goto ret;
-
- /* Get SNR of the video signal */
- rc = xc2028_get_reg(priv, XREG_SNR, &signal);
- if (rc < 0)
- goto ret;
-
- /* Signal level is 3 bits only */
-
- signal = ((1 << 12) - 1) | ((signal & 0x07) << 12);
-
-ret:
- mutex_unlock(&priv->lock);
-
- *strength = signal;
-
- tuner_dbg("signal strength is %d\n", signal);
-
- return rc;
-}
-
-static int xc2028_get_afc(struct dvb_frontend *fe, s32 *afc)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- int i, rc;
- u16 frq_lock = 0;
- s16 afc_reg = 0;
-
- rc = check_device_status(priv);
- if (rc < 0)
- return rc;
-
- mutex_lock(&priv->lock);
-
- /* Sync Lock Indicator */
- for (i = 0; i < 3; i++) {
- rc = xc2028_get_reg(priv, XREG_LOCK, &frq_lock);
- if (rc < 0)
- goto ret;
-
- if (frq_lock)
- break;
- msleep(6);
- }
-
- /* Frequency didn't lock */
- if (frq_lock == 2)
- goto ret;
-
- /* Get AFC */
- rc = xc2028_get_reg(priv, XREG_FREQ_ERROR, &afc_reg);
- if (rc < 0)
- goto ret;
-
- *afc = afc_reg * 15625; /* Hz */
-
- tuner_dbg("AFC is %d Hz\n", *afc);
-
-ret:
- mutex_unlock(&priv->lock);
-
- return rc;
-}
-
-#define DIV 15625
-
-static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
- enum v4l2_tuner_type new_type,
- unsigned int type,
- v4l2_std_id std,
- u16 int_freq)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- int rc = -EINVAL;
- unsigned char buf[4];
- u32 div, offset = 0;
-
- tuner_dbg("%s called\n", __func__);
-
- mutex_lock(&priv->lock);
-
- tuner_dbg("should set frequency %d kHz\n", freq / 1000);
-
- if (check_firmware(fe, type, std, int_freq) < 0)
- goto ret;
-
- /* On some cases xc2028 can disable video output, if
- * very weak signals are received. By sending a soft
- * reset, this is re-enabled. So, it is better to always
- * send a soft reset before changing channels, to be sure
- * that xc2028 will be in a safe state.
- * Maybe this might also be needed for DTV.
- */
- switch (new_type) {
- case V4L2_TUNER_ANALOG_TV:
- rc = send_seq(priv, {0x00, 0x00});
-
- /* Analog mode requires offset = 0 */
- break;
- case V4L2_TUNER_RADIO:
- /* Radio mode requires offset = 0 */
- break;
- case V4L2_TUNER_DIGITAL_TV:
- /*
- * Digital modes require an offset to adjust to the
- * proper frequency. The offset depends on what
- * firmware version is used.
- */
-
- /*
- * Adjust to the center frequency. This is calculated by the
- * formula: offset = 1.25MHz - BW/2
- * For DTV 7/8, the firmware uses BW = 8000, so it needs a
- * further adjustment to get the frequency center on VHF
- */
-
- /*
- * The firmware DTV78 used to work fine in UHF band (8 MHz
- * bandwidth) but not at all in VHF band (7 MHz bandwidth).
- * The real problem was connected to the formula used to
- * calculate the center frequency offset in VHF band.
- * In fact, removing the 500KHz adjustment fixed the problem.
- * This is coherent to what was implemented for the DTV7
- * firmware.
- * In the end, now the center frequency is the same for all 3
- * firmwares (DTV7, DTV8, DTV78) and doesn't depend on channel
- * bandwidth.
- */
-
- if (priv->cur_fw.type & DTV6)
- offset = 1750000;
- else /* DTV7 or DTV8 or DTV78 */
- offset = 2750000;
-
- /*
- * xc3028 additional "magic"
- * Depending on the firmware version, it needs some adjustments
- * to properly centralize the frequency. This seems to be
- * needed to compensate the SCODE table adjustments made by
- * newer firmwares
- */
-
- /*
- * The proper adjustment would be to do it at s-code table.
- * However, this didn't work, as reported by
- * Robert Lowery <rglowery@exemail.com.au>
- */
-
-#if 0
- /*
- * Still need tests for XC3028L (firmware 3.2 or upper)
- * So, for now, let's just comment the per-firmware
- * version of this change. Reports with xc3028l working
- * with and without the lines bellow are welcome
- */
-
- if (priv->firm_version < 0x0302) {
- if (priv->cur_fw.type & DTV7)
- offset += 500000;
- } else {
- if (priv->cur_fw.type & DTV7)
- offset -= 300000;
- else if (type != ATSC) /* DVB @6MHz, DTV 8 and DTV 7/8 */
- offset += 200000;
- }
-#endif
- }
-
- div = (freq - offset + DIV / 2) / DIV;
-
- /* CMD= Set frequency */
- if (priv->firm_version < 0x0202)
- rc = send_seq(priv, {0x00, XREG_RF_FREQ, 0x00, 0x00});
- else
- rc = send_seq(priv, {0x80, XREG_RF_FREQ, 0x00, 0x00});
- if (rc < 0)
- goto ret;
-
- /* Return code shouldn't be checked.
- The reset CLK is needed only with tm6000.
- Driver should work fine even if this fails.
- */
- if (priv->ctrl.msleep)
- msleep(priv->ctrl.msleep);
- do_tuner_callback(fe, XC2028_RESET_CLK, 1);
-
- msleep(10);
-
- buf[0] = 0xff & (div >> 24);
- buf[1] = 0xff & (div >> 16);
- buf[2] = 0xff & (div >> 8);
- buf[3] = 0xff & (div);
-
- rc = i2c_send(priv, buf, sizeof(buf));
- if (rc < 0)
- goto ret;
- msleep(100);
-
- priv->frequency = freq;
-
- tuner_dbg("divisor= %*ph (freq=%d.%03d)\n", 4, buf,
- freq / 1000000, (freq % 1000000) / 1000);
-
- rc = 0;
-
-ret:
- mutex_unlock(&priv->lock);
-
- return rc;
-}
-
-static int xc2028_set_analog_freq(struct dvb_frontend *fe,
- struct analog_parameters *p)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- unsigned int type=0;
-
- tuner_dbg("%s called\n", __func__);
-
- if (p->mode == V4L2_TUNER_RADIO) {
- type |= FM;
- if (priv->ctrl.input1)
- type |= INPUT1;
- return generic_set_freq(fe, (625l * p->frequency) / 10,
- V4L2_TUNER_RADIO, type, 0, 0);
- }
-
- /* if std is not defined, choose one */
- if (!p->std)
- p->std = V4L2_STD_MN;
-
- /* PAL/M, PAL/N, PAL/Nc and NTSC variants should use 6MHz firmware */
- if (!(p->std & V4L2_STD_MN))
- type |= F8MHZ;
-
- /* Add audio hack to std mask */
- p->std |= parse_audio_std_option();
-
- return generic_set_freq(fe, 62500l * p->frequency,
- V4L2_TUNER_ANALOG_TV, type, p->std, 0);
-}
-
-static int xc2028_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 delsys = c->delivery_system;
- u32 bw = c->bandwidth_hz;
- struct xc2028_data *priv = fe->tuner_priv;
- int rc;
- unsigned int type = 0;
- u16 demod = 0;
-
- tuner_dbg("%s called\n", __func__);
-
- rc = check_device_status(priv);
- if (rc < 0)
- return rc;
-
- switch (delsys) {
- case SYS_DVBT:
- case SYS_DVBT2:
- /*
- * The only countries with 6MHz seem to be Taiwan/Uruguay.
- * Both seem to require QAM firmware for OFDM decoding
- * Tested in Taiwan by Terry Wu <terrywu2009@gmail.com>
- */
- if (bw <= 6000000)
- type |= QAM;
-
- switch (priv->ctrl.type) {
- case XC2028_D2633:
- type |= D2633;
- break;
- case XC2028_D2620:
- type |= D2620;
- break;
- case XC2028_AUTO:
- default:
- /* Zarlink seems to need D2633 */
- if (priv->ctrl.demod == XC3028_FE_ZARLINK456)
- type |= D2633;
- else
- type |= D2620;
- }
- break;
- case SYS_ATSC:
- /* The only ATSC firmware (at least on v2.7) is D2633 */
- type |= ATSC | D2633;
- break;
- /* DVB-S and pure QAM (FE_QAM) are not supported */
- default:
- return -EINVAL;
- }
-
- if (bw <= 6000000) {
- type |= DTV6;
- priv->ctrl.vhfbw7 = 0;
- priv->ctrl.uhfbw8 = 0;
- } else if (bw <= 7000000) {
- if (c->frequency < 470000000)
- priv->ctrl.vhfbw7 = 1;
- else
- priv->ctrl.uhfbw8 = 0;
- type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV7;
- type |= F8MHZ;
- } else {
- if (c->frequency < 470000000)
- priv->ctrl.vhfbw7 = 0;
- else
- priv->ctrl.uhfbw8 = 1;
- type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV8;
- type |= F8MHZ;
- }
-
- /* All S-code tables need a 200kHz shift */
- if (priv->ctrl.demod) {
- demod = priv->ctrl.demod;
-
- /*
- * Newer firmwares require a 200 kHz offset only for ATSC
- */
- if (type == ATSC || priv->firm_version < 0x0302)
- demod += 200;
- /*
- * The DTV7 S-code table needs a 700 kHz shift.
- *
- * DTV7 is only used in Australia. Germany or Italy may also
- * use this firmware after initialization, but a tune to a UHF
- * channel should then cause DTV78 to be used.
- *
- * Unfortunately, on real-field tests, the s-code offset
- * didn't work as expected, as reported by
- * Robert Lowery <rglowery@exemail.com.au>
- */
- }
-
- return generic_set_freq(fe, c->frequency,
- V4L2_TUNER_DIGITAL_TV, type, 0, demod);
-}
-
-static int xc2028_sleep(struct dvb_frontend *fe)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- int rc;
-
- rc = check_device_status(priv);
- if (rc < 0)
- return rc;
-
- /* Avoid firmware reload on slow devices or if PM disabled */
- if (no_poweroff || priv->ctrl.disable_power_mgmt)
- return 0;
-
- tuner_dbg("Putting xc2028/3028 into poweroff mode.\n");
- if (debug > 1) {
- tuner_dbg("Printing sleep stack trace:\n");
- dump_stack();
- }
-
- mutex_lock(&priv->lock);
-
- if (priv->firm_version < 0x0202)
- rc = send_seq(priv, {0x00, XREG_POWER_DOWN, 0x00, 0x00});
- else
- rc = send_seq(priv, {0x80, XREG_POWER_DOWN, 0x00, 0x00});
-
- priv->state = XC2028_SLEEP;
-
- mutex_unlock(&priv->lock);
-
- return rc;
-}
-
-static int xc2028_dvb_release(struct dvb_frontend *fe)
-{
- struct xc2028_data *priv = fe->tuner_priv;
-
- tuner_dbg("%s called\n", __func__);
-
- mutex_lock(&xc2028_list_mutex);
-
- /* only perform final cleanup if this is the last instance */
- if (hybrid_tuner_report_instance_count(priv) == 1) {
- free_firmware(priv);
- kfree(priv->ctrl.fname);
- priv->ctrl.fname = NULL;
- }
-
- if (priv)
- hybrid_tuner_release_state(priv);
-
- mutex_unlock(&xc2028_list_mutex);
-
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int xc2028_get_frequency(struct dvb_frontend *fe, u32 *frequency)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- int rc;
-
- tuner_dbg("%s called\n", __func__);
-
- rc = check_device_status(priv);
- if (rc < 0)
- return rc;
-
- *frequency = priv->frequency;
-
- return 0;
-}
-
-static void load_firmware_cb(const struct firmware *fw,
- void *context)
-{
- struct dvb_frontend *fe = context;
- struct xc2028_data *priv = fe->tuner_priv;
- int rc;
-
- tuner_dbg("request_firmware_nowait(): %s\n", fw ? "OK" : "error");
- if (!fw) {
- tuner_err("Could not load firmware %s.\n", priv->fname);
- priv->state = XC2028_NODEV;
- return;
- }
-
- rc = load_all_firmwares(fe, fw);
-
- release_firmware(fw);
-
- if (rc < 0)
- return;
- priv->state = XC2028_SLEEP;
-}
-
-static int xc2028_set_config(struct dvb_frontend *fe, void *priv_cfg)
-{
- struct xc2028_data *priv = fe->tuner_priv;
- struct xc2028_ctrl *p = priv_cfg;
- int rc = 0;
-
- tuner_dbg("%s called\n", __func__);
-
- mutex_lock(&priv->lock);
-
- /*
- * Copy the config data.
- * For the firmware name, keep a local copy of the string,
- * in order to avoid troubles during device release.
- */
- if (priv->ctrl.fname)
- kfree(priv->ctrl.fname);
- memcpy(&priv->ctrl, p, sizeof(priv->ctrl));
- if (p->fname) {
- priv->ctrl.fname = kstrdup(p->fname, GFP_KERNEL);
- if (priv->ctrl.fname == NULL)
- rc = -ENOMEM;
- }
-
- /*
- * If firmware name changed, frees firmware. As free_firmware will
- * reset the status to NO_FIRMWARE, this forces a new request_firmware
- */
- if (!firmware_name[0] && p->fname &&
- priv->fname && strcmp(p->fname, priv->fname))
- free_firmware(priv);
-
- if (priv->ctrl.max_len < 9)
- priv->ctrl.max_len = 13;
-
- if (priv->state == XC2028_NO_FIRMWARE) {
- if (!firmware_name[0])
- priv->fname = priv->ctrl.fname;
- else
- priv->fname = firmware_name;
-
- rc = request_firmware_nowait(THIS_MODULE, 1,
- priv->fname,
- priv->i2c_props.adap->dev.parent,
- GFP_KERNEL,
- fe, load_firmware_cb);
- if (rc < 0) {
- tuner_err("Failed to request firmware %s\n",
- priv->fname);
- priv->state = XC2028_NODEV;
- } else
- priv->state = XC2028_WAITING_FIRMWARE;
- }
- mutex_unlock(&priv->lock);
-
- return rc;
-}
-
-static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = {
- .info = {
- .name = "Xceive XC3028",
- .frequency_min = 42000000,
- .frequency_max = 864000000,
- .frequency_step = 50000,
- },
-
- .set_config = xc2028_set_config,
- .set_analog_params = xc2028_set_analog_freq,
- .release = xc2028_dvb_release,
- .get_frequency = xc2028_get_frequency,
- .get_rf_strength = xc2028_signal,
- .get_afc = xc2028_get_afc,
- .set_params = xc2028_set_params,
- .sleep = xc2028_sleep,
-};
-
-struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
- struct xc2028_config *cfg)
-{
- struct xc2028_data *priv;
- int instance;
-
- if (debug)
- printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n");
-
- if (NULL == cfg)
- return NULL;
-
- if (!fe) {
- printk(KERN_ERR "xc2028: No frontend!\n");
- return NULL;
- }
-
- mutex_lock(&xc2028_list_mutex);
-
- instance = hybrid_tuner_request_state(struct xc2028_data, priv,
- hybrid_tuner_instance_list,
- cfg->i2c_adap, cfg->i2c_addr,
- "xc2028");
- switch (instance) {
- case 0:
- /* memory allocation failure */
- goto fail;
- break;
- case 1:
- /* new tuner instance */
- priv->ctrl.max_len = 13;
-
- mutex_init(&priv->lock);
-
- fe->tuner_priv = priv;
- break;
- case 2:
- /* existing tuner instance */
- fe->tuner_priv = priv;
- break;
- }
-
- memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops,
- sizeof(xc2028_dvb_tuner_ops));
-
- tuner_info("type set to %s\n", "XCeive xc2028/xc3028 tuner");
-
- if (cfg->ctrl)
- xc2028_set_config(fe, cfg->ctrl);
-
- mutex_unlock(&xc2028_list_mutex);
-
- return fe;
-fail:
- mutex_unlock(&xc2028_list_mutex);
-
- xc2028_dvb_release(fe);
- return NULL;
-}
-
-EXPORT_SYMBOL(xc2028_attach);
-
-MODULE_DESCRIPTION("Xceive xc2028/xc3028 tuner driver");
-MODULE_AUTHOR("Michel Ludwig <michel.ludwig@gmail.com>");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE(XC2028_DEFAULT_FIRMWARE);
-MODULE_FIRMWARE(XC3028L_DEFAULT_FIRMWARE);
diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h
deleted file mode 100644
index 9ebfb2d..0000000
--- a/drivers/media/common/tuners/tuner-xc2028.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* tuner-xc2028
- *
- * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org)
- * This code is placed under the terms of the GNU General Public License v2
- */
-
-#ifndef __TUNER_XC2028_H__
-#define __TUNER_XC2028_H__
-
-#include "dvb_frontend.h"
-
-#define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw"
-#define XC3028L_DEFAULT_FIRMWARE "xc3028L-v36.fw"
-
-/* Dmoduler IF (kHz) */
-#define XC3028_FE_DEFAULT 0 /* Don't load SCODE */
-#define XC3028_FE_LG60 6000
-#define XC3028_FE_ATI638 6380
-#define XC3028_FE_OREN538 5380
-#define XC3028_FE_OREN36 3600
-#define XC3028_FE_TOYOTA388 3880
-#define XC3028_FE_TOYOTA794 7940
-#define XC3028_FE_DIBCOM52 5200
-#define XC3028_FE_ZARLINK456 4560
-#define XC3028_FE_CHINA 5200
-
-enum firmware_type {
- XC2028_AUTO = 0, /* By default, auto-detects */
- XC2028_D2633,
- XC2028_D2620,
-};
-
-struct xc2028_ctrl {
- char *fname;
- int max_len;
- int msleep;
- unsigned int scode_table;
- unsigned int mts :1;
- unsigned int input1:1;
- unsigned int vhfbw7:1;
- unsigned int uhfbw8:1;
- unsigned int disable_power_mgmt:1;
- unsigned int read_not_reliable:1;
- unsigned int demod;
- enum firmware_type type:2;
-};
-
-struct xc2028_config {
- struct i2c_adapter *i2c_adap;
- u8 i2c_addr;
- struct xc2028_ctrl *ctrl;
-};
-
-/* xc2028 commands for callback */
-#define XC2028_TUNER_RESET 0
-#define XC2028_RESET_CLK 1
-#define XC2028_I2C_FLUSH 2
-
-#if defined(CONFIG_MEDIA_TUNER_XC2028) || (defined(CONFIG_MEDIA_TUNER_XC2028_MODULE) && defined(MODULE))
-extern struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
- struct xc2028_config *cfg);
-#else
-static inline struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
- struct xc2028_config *cfg)
-{
- printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
- __func__);
- return NULL;
-}
-#endif
-
-#endif /* __TUNER_XC2028_H__ */
diff --git a/drivers/media/common/tuners/xc4000.c b/drivers/media/common/tuners/xc4000.c
deleted file mode 100644
index 4937712..0000000
--- a/drivers/media/common/tuners/xc4000.c
+++ /dev/null
@@ -1,1757 +0,0 @@
-/*
- * Driver for Xceive XC4000 "QAM/8VSB single chip tuner"
- *
- * Copyright (c) 2007 Xceive Corporation
- * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
- * Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
- * Copyright (c) 2009 Davide Ferri <d.ferri@zero11.it>
- * Copyright (c) 2010 Istvan Varga <istvan_v@mailbox.hu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/videodev2.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <asm/unaligned.h>
-
-#include "dvb_frontend.h"
-
-#include "xc4000.h"
-#include "tuner-i2c.h"
-#include "tuner-xc2028-types.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debugging level (0 to 2, default: 0 (off)).");
-
-static int no_poweroff;
-module_param(no_poweroff, int, 0644);
-MODULE_PARM_DESC(no_poweroff, "Power management (1: disabled, 2: enabled, "
- "0 (default): use device-specific default mode).");
-
-static int audio_std;
-module_param(audio_std, int, 0644);
-MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly "
- "needs to know what audio standard is needed for some video standards "
- "with audio A2 or NICAM. The valid settings are a sum of:\n"
- " 1: use NICAM/B or A2/B instead of NICAM/A or A2/A\n"
- " 2: use A2 instead of NICAM or BTSC\n"
- " 4: use SECAM/K3 instead of K1\n"
- " 8: use PAL-D/K audio for SECAM-D/K\n"
- "16: use FM radio input 1 instead of input 2\n"
- "32: use mono audio (the lower three bits are ignored)");
-
-static char firmware_name[30];
-module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0);
-MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
- "default firmware name.");
-
-static DEFINE_MUTEX(xc4000_list_mutex);
-static LIST_HEAD(hybrid_tuner_instance_list);
-
-#define dprintk(level, fmt, arg...) if (debug >= level) \
- printk(KERN_INFO "%s: " fmt, "xc4000", ## arg)
-
-/* struct for storing firmware table */
-struct firmware_description {
- unsigned int type;
- v4l2_std_id id;
- __u16 int_freq;
- unsigned char *ptr;
- unsigned int size;
-};
-
-struct firmware_properties {
- unsigned int type;
- v4l2_std_id id;
- v4l2_std_id std_req;
- __u16 int_freq;
- unsigned int scode_table;
- int scode_nr;
-};
-
-struct xc4000_priv {
- struct tuner_i2c_props i2c_props;
- struct list_head hybrid_tuner_instance_list;
- struct firmware_description *firm;
- int firm_size;
- u32 if_khz;
- u32 freq_hz;
- u32 bandwidth;
- u8 video_standard;
- u8 rf_mode;
- u8 default_pm;
- u8 dvb_amplitude;
- u8 set_smoothedcvbs;
- u8 ignore_i2c_write_errors;
- __u16 firm_version;
- struct firmware_properties cur_fw;
- __u16 hwmodel;
- __u16 hwvers;
- struct mutex lock;
-};
-
-#define XC4000_AUDIO_STD_B 1
-#define XC4000_AUDIO_STD_A2 2
-#define XC4000_AUDIO_STD_K3 4
-#define XC4000_AUDIO_STD_L 8
-#define XC4000_AUDIO_STD_INPUT1 16
-#define XC4000_AUDIO_STD_MONO 32
-
-#define XC4000_DEFAULT_FIRMWARE "dvb-fe-xc4000-1.4.fw"
-
-/* Misc Defines */
-#define MAX_TV_STANDARD 24
-#define XC_MAX_I2C_WRITE_LENGTH 64
-#define XC_POWERED_DOWN 0x80000000U
-
-/* Signal Types */
-#define XC_RF_MODE_AIR 0
-#define XC_RF_MODE_CABLE 1
-
-/* Product id */
-#define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000
-#define XC_PRODUCT_ID_XC4000 0x0FA0
-#define XC_PRODUCT_ID_XC4100 0x1004
-
-/* Registers (Write-only) */
-#define XREG_INIT 0x00
-#define XREG_VIDEO_MODE 0x01
-#define XREG_AUDIO_MODE 0x02
-#define XREG_RF_FREQ 0x03
-#define XREG_D_CODE 0x04
-#define XREG_DIRECTSITTING_MODE 0x05
-#define XREG_SEEK_MODE 0x06
-#define XREG_POWER_DOWN 0x08
-#define XREG_SIGNALSOURCE 0x0A
-#define XREG_SMOOTHEDCVBS 0x0E
-#define XREG_AMPLITUDE 0x10
-
-/* Registers (Read-only) */
-#define XREG_ADC_ENV 0x00
-#define XREG_QUALITY 0x01
-#define XREG_FRAME_LINES 0x02
-#define XREG_HSYNC_FREQ 0x03
-#define XREG_LOCK 0x04
-#define XREG_FREQ_ERROR 0x05
-#define XREG_SNR 0x06
-#define XREG_VERSION 0x07
-#define XREG_PRODUCT_ID 0x08
-#define XREG_SIGNAL_LEVEL 0x0A
-#define XREG_NOISE_LEVEL 0x0B
-
-/*
- Basic firmware description. This will remain with
- the driver for documentation purposes.
-
- This represents an I2C firmware file encoded as a
- string of unsigned char. Format is as follows:
-
- char[0 ]=len0_MSB -> len = len_MSB * 256 + len_LSB
- char[1 ]=len0_LSB -> length of first write transaction
- char[2 ]=data0 -> first byte to be sent
- char[3 ]=data1
- char[4 ]=data2
- char[ ]=...
- char[M ]=dataN -> last byte to be sent
- char[M+1]=len1_MSB -> len = len_MSB * 256 + len_LSB
- char[M+2]=len1_LSB -> length of second write transaction
- char[M+3]=data0
- char[M+4]=data1
- ...
- etc.
-
- The [len] value should be interpreted as follows:
-
- len= len_MSB _ len_LSB
- len=1111_1111_1111_1111 : End of I2C_SEQUENCE
- len=0000_0000_0000_0000 : Reset command: Do hardware reset
- len=0NNN_NNNN_NNNN_NNNN : Normal transaction: number of bytes = {1:32767)
- len=1WWW_WWWW_WWWW_WWWW : Wait command: wait for {1:32767} ms
-
- For the RESET and WAIT commands, the two following bytes will contain
- immediately the length of the following transaction.
-*/
-
-struct XC_TV_STANDARD {
- const char *Name;
- u16 audio_mode;
- u16 video_mode;
- u16 int_freq;
-};
-
-/* Tuner standards */
-#define XC4000_MN_NTSC_PAL_BTSC 0
-#define XC4000_MN_NTSC_PAL_A2 1
-#define XC4000_MN_NTSC_PAL_EIAJ 2
-#define XC4000_MN_NTSC_PAL_Mono 3
-#define XC4000_BG_PAL_A2 4
-#define XC4000_BG_PAL_NICAM 5
-#define XC4000_BG_PAL_MONO 6
-#define XC4000_I_PAL_NICAM 7
-#define XC4000_I_PAL_NICAM_MONO 8
-#define XC4000_DK_PAL_A2 9
-#define XC4000_DK_PAL_NICAM 10
-#define XC4000_DK_PAL_MONO 11
-#define XC4000_DK_SECAM_A2DK1 12
-#define XC4000_DK_SECAM_A2LDK3 13
-#define XC4000_DK_SECAM_A2MONO 14
-#define XC4000_DK_SECAM_NICAM 15
-#define XC4000_L_SECAM_NICAM 16
-#define XC4000_LC_SECAM_NICAM 17
-#define XC4000_DTV6 18
-#define XC4000_DTV8 19
-#define XC4000_DTV7_8 20
-#define XC4000_DTV7 21
-#define XC4000_FM_Radio_INPUT2 22
-#define XC4000_FM_Radio_INPUT1 23
-
-static struct XC_TV_STANDARD xc4000_standard[MAX_TV_STANDARD] = {
- {"M/N-NTSC/PAL-BTSC", 0x0000, 0x80A0, 4500},
- {"M/N-NTSC/PAL-A2", 0x0000, 0x80A0, 4600},
- {"M/N-NTSC/PAL-EIAJ", 0x0040, 0x80A0, 4500},
- {"M/N-NTSC/PAL-Mono", 0x0078, 0x80A0, 4500},
- {"B/G-PAL-A2", 0x0000, 0x8159, 5640},
- {"B/G-PAL-NICAM", 0x0004, 0x8159, 5740},
- {"B/G-PAL-MONO", 0x0078, 0x8159, 5500},
- {"I-PAL-NICAM", 0x0080, 0x8049, 6240},
- {"I-PAL-NICAM-MONO", 0x0078, 0x8049, 6000},
- {"D/K-PAL-A2", 0x0000, 0x8049, 6380},
- {"D/K-PAL-NICAM", 0x0080, 0x8049, 6200},
- {"D/K-PAL-MONO", 0x0078, 0x8049, 6500},
- {"D/K-SECAM-A2 DK1", 0x0000, 0x8049, 6340},
- {"D/K-SECAM-A2 L/DK3", 0x0000, 0x8049, 6000},
- {"D/K-SECAM-A2 MONO", 0x0078, 0x8049, 6500},
- {"D/K-SECAM-NICAM", 0x0080, 0x8049, 6200},
- {"L-SECAM-NICAM", 0x8080, 0x0009, 6200},
- {"L'-SECAM-NICAM", 0x8080, 0x4009, 6200},
- {"DTV6", 0x00C0, 0x8002, 0},
- {"DTV8", 0x00C0, 0x800B, 0},
- {"DTV7/8", 0x00C0, 0x801B, 0},
- {"DTV7", 0x00C0, 0x8007, 0},
- {"FM Radio-INPUT2", 0x0008, 0x9800, 10700},
- {"FM Radio-INPUT1", 0x0008, 0x9000, 10700}
-};
-
-static int xc4000_readreg(struct xc4000_priv *priv, u16 reg, u16 *val);
-static int xc4000_tuner_reset(struct dvb_frontend *fe);
-static void xc_debug_dump(struct xc4000_priv *priv);
-
-static int xc_send_i2c_data(struct xc4000_priv *priv, u8 *buf, int len)
-{
- struct i2c_msg msg = { .addr = priv->i2c_props.addr,
- .flags = 0, .buf = buf, .len = len };
- if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
- if (priv->ignore_i2c_write_errors == 0) {
- printk(KERN_ERR "xc4000: I2C write failed (len=%i)\n",
- len);
- if (len == 4) {
- printk(KERN_ERR "bytes %*ph\n", 4, buf);
- }
- return -EREMOTEIO;
- }
- }
- return 0;
-}
-
-static int xc4000_tuner_reset(struct dvb_frontend *fe)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- int ret;
-
- dprintk(1, "%s()\n", __func__);
-
- if (fe->callback) {
- ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
- fe->dvb->priv :
- priv->i2c_props.adap->algo_data,
- DVB_FRONTEND_COMPONENT_TUNER,
- XC4000_TUNER_RESET, 0);
- if (ret) {
- printk(KERN_ERR "xc4000: reset failed\n");
- return -EREMOTEIO;
- }
- } else {
- printk(KERN_ERR "xc4000: no tuner reset callback function, "
- "fatal\n");
- return -EINVAL;
- }
- return 0;
-}
-
-static int xc_write_reg(struct xc4000_priv *priv, u16 regAddr, u16 i2cData)
-{
- u8 buf[4];
- int result;
-
- buf[0] = (regAddr >> 8) & 0xFF;
- buf[1] = regAddr & 0xFF;
- buf[2] = (i2cData >> 8) & 0xFF;
- buf[3] = i2cData & 0xFF;
- result = xc_send_i2c_data(priv, buf, 4);
-
- return result;
-}
-
-static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
-
- int i, nbytes_to_send, result;
- unsigned int len, pos, index;
- u8 buf[XC_MAX_I2C_WRITE_LENGTH];
-
- index = 0;
- while ((i2c_sequence[index] != 0xFF) ||
- (i2c_sequence[index + 1] != 0xFF)) {
- len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
- if (len == 0x0000) {
- /* RESET command */
- /* NOTE: this is ignored, as the reset callback was */
- /* already called by check_firmware() */
- index += 2;
- } else if (len & 0x8000) {
- /* WAIT command */
- msleep(len & 0x7FFF);
- index += 2;
- } else {
- /* Send i2c data whilst ensuring individual transactions
- * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
- */
- index += 2;
- buf[0] = i2c_sequence[index];
- buf[1] = i2c_sequence[index + 1];
- pos = 2;
- while (pos < len) {
- if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
- nbytes_to_send =
- XC_MAX_I2C_WRITE_LENGTH;
- else
- nbytes_to_send = (len - pos + 2);
- for (i = 2; i < nbytes_to_send; i++) {
- buf[i] = i2c_sequence[index + pos +
- i - 2];
- }
- result = xc_send_i2c_data(priv, buf,
- nbytes_to_send);
-
- if (result != 0)
- return result;
-
- pos += nbytes_to_send - 2;
- }
- index += len;
- }
- }
- return 0;
-}
-
-static int xc_set_tv_standard(struct xc4000_priv *priv,
- u16 video_mode, u16 audio_mode)
-{
- int ret;
- dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, video_mode, audio_mode);
- dprintk(1, "%s() Standard = %s\n",
- __func__,
- xc4000_standard[priv->video_standard].Name);
-
- /* Don't complain when the request fails because of i2c stretching */
- priv->ignore_i2c_write_errors = 1;
-
- ret = xc_write_reg(priv, XREG_VIDEO_MODE, video_mode);
- if (ret == 0)
- ret = xc_write_reg(priv, XREG_AUDIO_MODE, audio_mode);
-
- priv->ignore_i2c_write_errors = 0;
-
- return ret;
-}
-
-static int xc_set_signal_source(struct xc4000_priv *priv, u16 rf_mode)
-{
- dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
- rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
-
- if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
- rf_mode = XC_RF_MODE_CABLE;
- printk(KERN_ERR
- "%s(), Invalid mode, defaulting to CABLE",
- __func__);
- }
- return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
-}
-
-static const struct dvb_tuner_ops xc4000_tuner_ops;
-
-static int xc_set_rf_frequency(struct xc4000_priv *priv, u32 freq_hz)
-{
- u16 freq_code;
-
- dprintk(1, "%s(%u)\n", __func__, freq_hz);
-
- if ((freq_hz > xc4000_tuner_ops.info.frequency_max) ||
- (freq_hz < xc4000_tuner_ops.info.frequency_min))
- return -EINVAL;
-
- freq_code = (u16)(freq_hz / 15625);
-
- /* WAS: Starting in firmware version 1.1.44, Xceive recommends using the
- FINERFREQ for all normal tuning (the doc indicates reg 0x03 should
- only be used for fast scanning for channel lock) */
- /* WAS: XREG_FINERFREQ */
- return xc_write_reg(priv, XREG_RF_FREQ, freq_code);
-}
-
-static int xc_get_adc_envelope(struct xc4000_priv *priv, u16 *adc_envelope)
-{
- return xc4000_readreg(priv, XREG_ADC_ENV, adc_envelope);
-}
-
-static int xc_get_frequency_error(struct xc4000_priv *priv, u32 *freq_error_hz)
-{
- int result;
- u16 regData;
- u32 tmp;
-
- result = xc4000_readreg(priv, XREG_FREQ_ERROR, ®Data);
- if (result != 0)
- return result;
-
- tmp = (u32)regData & 0xFFFFU;
- tmp = (tmp < 0x8000U ? tmp : 0x10000U - tmp);
- (*freq_error_hz) = tmp * 15625;
- return result;
-}
-
-static int xc_get_lock_status(struct xc4000_priv *priv, u16 *lock_status)
-{
- return xc4000_readreg(priv, XREG_LOCK, lock_status);
-}
-
-static int xc_get_version(struct xc4000_priv *priv,
- u8 *hw_majorversion, u8 *hw_minorversion,
- u8 *fw_majorversion, u8 *fw_minorversion)
-{
- u16 data;
- int result;
-
- result = xc4000_readreg(priv, XREG_VERSION, &data);
- if (result != 0)
- return result;
-
- (*hw_majorversion) = (data >> 12) & 0x0F;
- (*hw_minorversion) = (data >> 8) & 0x0F;
- (*fw_majorversion) = (data >> 4) & 0x0F;
- (*fw_minorversion) = data & 0x0F;
-
- return 0;
-}
-
-static int xc_get_hsync_freq(struct xc4000_priv *priv, u32 *hsync_freq_hz)
-{
- u16 regData;
- int result;
-
- result = xc4000_readreg(priv, XREG_HSYNC_FREQ, ®Data);
- if (result != 0)
- return result;
-
- (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
- return result;
-}
-
-static int xc_get_frame_lines(struct xc4000_priv *priv, u16 *frame_lines)
-{
- return xc4000_readreg(priv, XREG_FRAME_LINES, frame_lines);
-}
-
-static int xc_get_quality(struct xc4000_priv *priv, u16 *quality)
-{
- return xc4000_readreg(priv, XREG_QUALITY, quality);
-}
-
-static int xc_get_signal_level(struct xc4000_priv *priv, u16 *signal)
-{
- return xc4000_readreg(priv, XREG_SIGNAL_LEVEL, signal);
-}
-
-static int xc_get_noise_level(struct xc4000_priv *priv, u16 *noise)
-{
- return xc4000_readreg(priv, XREG_NOISE_LEVEL, noise);
-}
-
-static u16 xc_wait_for_lock(struct xc4000_priv *priv)
-{
- u16 lock_state = 0;
- int watchdog_count = 40;
-
- while ((lock_state == 0) && (watchdog_count > 0)) {
- xc_get_lock_status(priv, &lock_state);
- if (lock_state != 1) {
- msleep(5);
- watchdog_count--;
- }
- }
- return lock_state;
-}
-
-static int xc_tune_channel(struct xc4000_priv *priv, u32 freq_hz)
-{
- int found = 1;
- int result;
-
- dprintk(1, "%s(%u)\n", __func__, freq_hz);
-
- /* Don't complain when the request fails because of i2c stretching */
- priv->ignore_i2c_write_errors = 1;
- result = xc_set_rf_frequency(priv, freq_hz);
- priv->ignore_i2c_write_errors = 0;
-
- if (result != 0)
- return 0;
-
- /* wait for lock only in analog TV mode */
- if ((priv->cur_fw.type & (FM | DTV6 | DTV7 | DTV78 | DTV8)) == 0) {
- if (xc_wait_for_lock(priv) != 1)
- found = 0;
- }
-
- /* Wait for stats to stabilize.
- * Frame Lines needs two frame times after initial lock
- * before it is valid.
- */
- msleep(debug ? 100 : 10);
-
- if (debug)
- xc_debug_dump(priv);
-
- return found;
-}
-
-static int xc4000_readreg(struct xc4000_priv *priv, u16 reg, u16 *val)
-{
- u8 buf[2] = { reg >> 8, reg & 0xff };
- u8 bval[2] = { 0, 0 };
- struct i2c_msg msg[2] = {
- { .addr = priv->i2c_props.addr,
- .flags = 0, .buf = &buf[0], .len = 2 },
- { .addr = priv->i2c_props.addr,
- .flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
- };
-
- if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
- printk(KERN_ERR "xc4000: I2C read failed\n");
- return -EREMOTEIO;
- }
-
- *val = (bval[0] << 8) | bval[1];
- return 0;
-}
-
-#define dump_firm_type(t) dump_firm_type_and_int_freq(t, 0)
-static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq)
-{
- if (type & BASE)
- printk(KERN_CONT "BASE ");
- if (type & INIT1)
- printk(KERN_CONT "INIT1 ");
- if (type & F8MHZ)
- printk(KERN_CONT "F8MHZ ");
- if (type & MTS)
- printk(KERN_CONT "MTS ");
- if (type & D2620)
- printk(KERN_CONT "D2620 ");
- if (type & D2633)
- printk(KERN_CONT "D2633 ");
- if (type & DTV6)
- printk(KERN_CONT "DTV6 ");
- if (type & QAM)
- printk(KERN_CONT "QAM ");
- if (type & DTV7)
- printk(KERN_CONT "DTV7 ");
- if (type & DTV78)
- printk(KERN_CONT "DTV78 ");
- if (type & DTV8)
- printk(KERN_CONT "DTV8 ");
- if (type & FM)
- printk(KERN_CONT "FM ");
- if (type & INPUT1)
- printk(KERN_CONT "INPUT1 ");
- if (type & LCD)
- printk(KERN_CONT "LCD ");
- if (type & NOGD)
- printk(KERN_CONT "NOGD ");
- if (type & MONO)
- printk(KERN_CONT "MONO ");
- if (type & ATSC)
- printk(KERN_CONT "ATSC ");
- if (type & IF)
- printk(KERN_CONT "IF ");
- if (type & LG60)
- printk(KERN_CONT "LG60 ");
- if (type & ATI638)
- printk(KERN_CONT "ATI638 ");
- if (type & OREN538)
- printk(KERN_CONT "OREN538 ");
- if (type & OREN36)
- printk(KERN_CONT "OREN36 ");
- if (type & TOYOTA388)
- printk(KERN_CONT "TOYOTA388 ");
- if (type & TOYOTA794)
- printk(KERN_CONT "TOYOTA794 ");
- if (type & DIBCOM52)
- printk(KERN_CONT "DIBCOM52 ");
- if (type & ZARLINK456)
- printk(KERN_CONT "ZARLINK456 ");
- if (type & CHINA)
- printk(KERN_CONT "CHINA ");
- if (type & F6MHZ)
- printk(KERN_CONT "F6MHZ ");
- if (type & INPUT2)
- printk(KERN_CONT "INPUT2 ");
- if (type & SCODE)
- printk(KERN_CONT "SCODE ");
- if (type & HAS_IF)
- printk(KERN_CONT "HAS_IF_%d ", int_freq);
-}
-
-static int seek_firmware(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id *id)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- int i, best_i = -1;
- unsigned int best_nr_diffs = 255U;
-
- if (!priv->firm) {
- printk(KERN_ERR "Error! firmware not loaded\n");
- return -EINVAL;
- }
-
- if (((type & ~SCODE) == 0) && (*id == 0))
- *id = V4L2_STD_PAL;
-
- /* Seek for generic video standard match */
- for (i = 0; i < priv->firm_size; i++) {
- v4l2_std_id id_diff_mask =
- (priv->firm[i].id ^ (*id)) & (*id);
- unsigned int type_diff_mask =
- (priv->firm[i].type ^ type)
- & (BASE_TYPES | DTV_TYPES | LCD | NOGD | MONO | SCODE);
- unsigned int nr_diffs;
-
- if (type_diff_mask
- & (BASE | INIT1 | FM | DTV6 | DTV7 | DTV78 | DTV8 | SCODE))
- continue;
-
- nr_diffs = hweight64(id_diff_mask) + hweight32(type_diff_mask);
- if (!nr_diffs) /* Supports all the requested standards */
- goto found;
-
- if (nr_diffs < best_nr_diffs) {
- best_nr_diffs = nr_diffs;
- best_i = i;
- }
- }
-
- /* FIXME: Would make sense to seek for type "hint" match ? */
- if (best_i < 0) {
- i = -ENOENT;
- goto ret;
- }
-
- if (best_nr_diffs > 0U) {
- printk(KERN_WARNING
- "Selecting best matching firmware (%u bits differ) for "
- "type=(%x), id %016llx:\n",
- best_nr_diffs, type, (unsigned long long)*id);
- i = best_i;
- }
-
-found:
- *id = priv->firm[i].id;
-
-ret:
- if (debug) {
- printk(KERN_DEBUG "%s firmware for type=",
- (i < 0) ? "Can't find" : "Found");
- dump_firm_type(type);
- printk(KERN_DEBUG "(%x), id %016llx.\n", type, (unsigned long long)*id);
- }
- return i;
-}
-
-static int load_firmware(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id *id)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- int pos, rc;
- unsigned char *p;
-
- pos = seek_firmware(fe, type, id);
- if (pos < 0)
- return pos;
-
- p = priv->firm[pos].ptr;
-
- /* Don't complain when the request fails because of i2c stretching */
- priv->ignore_i2c_write_errors = 1;
-
- rc = xc_load_i2c_sequence(fe, p);
-
- priv->ignore_i2c_write_errors = 0;
-
- return rc;
-}
-
-static int xc4000_fwupload(struct dvb_frontend *fe)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- const struct firmware *fw = NULL;
- const unsigned char *p, *endp;
- int rc = 0;
- int n, n_array;
- char name[33];
- const char *fname;
-
- if (firmware_name[0] != '\0')
- fname = firmware_name;
- else
- fname = XC4000_DEFAULT_FIRMWARE;
-
- dprintk(1, "Reading firmware %s\n", fname);
- rc = request_firmware(&fw, fname, priv->i2c_props.adap->dev.parent);
- if (rc < 0) {
- if (rc == -ENOENT)
- printk(KERN_ERR "Error: firmware %s not found.\n", fname);
- else
- printk(KERN_ERR "Error %d while requesting firmware %s\n",
- rc, fname);
-
- return rc;
- }
- p = fw->data;
- endp = p + fw->size;
-
- if (fw->size < sizeof(name) - 1 + 2 + 2) {
- printk(KERN_ERR "Error: firmware file %s has invalid size!\n",
- fname);
- goto corrupt;
- }
-
- memcpy(name, p, sizeof(name) - 1);
- name[sizeof(name) - 1] = '\0';
- p += sizeof(name) - 1;
-
- priv->firm_version = get_unaligned_le16(p);
- p += 2;
-
- n_array = get_unaligned_le16(p);
- p += 2;
-
- dprintk(1, "Loading %d firmware images from %s, type: %s, ver %d.%d\n",
- n_array, fname, name,
- priv->firm_version >> 8, priv->firm_version & 0xff);
-
- priv->firm = kcalloc(n_array, sizeof(*priv->firm), GFP_KERNEL);
- if (priv->firm == NULL) {
- printk(KERN_ERR "Not enough memory to load firmware file.\n");
- rc = -ENOMEM;
- goto done;
- }
- priv->firm_size = n_array;
-
- n = -1;
- while (p < endp) {
- __u32 type, size;
- v4l2_std_id id;
- __u16 int_freq = 0;
-
- n++;
- if (n >= n_array) {
- printk(KERN_ERR "More firmware images in file than "
- "were expected!\n");
- goto corrupt;
- }
-
- /* Checks if there's enough bytes to read */
- if (endp - p < sizeof(type) + sizeof(id) + sizeof(size))
- goto header;
-
- type = get_unaligned_le32(p);
- p += sizeof(type);
-
- id = get_unaligned_le64(p);
- p += sizeof(id);
-
- if (type & HAS_IF) {
- int_freq = get_unaligned_le16(p);
- p += sizeof(int_freq);
- if (endp - p < sizeof(size))
- goto header;
- }
-
- size = get_unaligned_le32(p);
- p += sizeof(size);
-
- if (!size || size > endp - p) {
- printk(KERN_ERR "Firmware type (%x), id %llx is corrupted (size=%d, expected %d)\n",
- type, (unsigned long long)id,
- (unsigned)(endp - p), size);
- goto corrupt;
- }
-
- priv->firm[n].ptr = kzalloc(size, GFP_KERNEL);
- if (priv->firm[n].ptr == NULL) {
- printk(KERN_ERR "Not enough memory to load firmware file.\n");
- rc = -ENOMEM;
- goto done;
- }
-
- if (debug) {
- printk(KERN_DEBUG "Reading firmware type ");
- dump_firm_type_and_int_freq(type, int_freq);
- printk(KERN_DEBUG "(%x), id %llx, size=%d.\n",
- type, (unsigned long long)id, size);
- }
-
- memcpy(priv->firm[n].ptr, p, size);
- priv->firm[n].type = type;
- priv->firm[n].id = id;
- priv->firm[n].size = size;
- priv->firm[n].int_freq = int_freq;
-
- p += size;
- }
-
- if (n + 1 != priv->firm_size) {
- printk(KERN_ERR "Firmware file is incomplete!\n");
- goto corrupt;
- }
-
- goto done;
-
-header:
- printk(KERN_ERR "Firmware header is incomplete!\n");
-corrupt:
- rc = -EINVAL;
- printk(KERN_ERR "Error: firmware file is corrupted!\n");
-
-done:
- release_firmware(fw);
- if (rc == 0)
- dprintk(1, "Firmware files loaded.\n");
-
- return rc;
-}
-
-static int load_scode(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id *id, __u16 int_freq, int scode)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- int pos, rc;
- unsigned char *p;
- u8 scode_buf[13];
- u8 indirect_mode[5];
-
- dprintk(1, "%s called int_freq=%d\n", __func__, int_freq);
-
- if (!int_freq) {
- pos = seek_firmware(fe, type, id);
- if (pos < 0)
- return pos;
- } else {
- for (pos = 0; pos < priv->firm_size; pos++) {
- if ((priv->firm[pos].int_freq == int_freq) &&
- (priv->firm[pos].type & HAS_IF))
- break;
- }
- if (pos == priv->firm_size)
- return -ENOENT;
- }
-
- p = priv->firm[pos].ptr;
-
- if (priv->firm[pos].size != 12 * 16 || scode >= 16)
- return -EINVAL;
- p += 12 * scode;
-
- if (debug) {
- tuner_info("Loading SCODE for type=");
- dump_firm_type_and_int_freq(priv->firm[pos].type,
- priv->firm[pos].int_freq);
- printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type,
- (unsigned long long)*id);
- }
-
- scode_buf[0] = 0x00;
- memcpy(&scode_buf[1], p, 12);
-
- /* Enter direct-mode */
- rc = xc_write_reg(priv, XREG_DIRECTSITTING_MODE, 0);
- if (rc < 0) {
- printk(KERN_ERR "failed to put device into direct mode!\n");
- return -EIO;
- }
-
- rc = xc_send_i2c_data(priv, scode_buf, 13);
- if (rc != 0) {
- /* Even if the send failed, make sure we set back to indirect
- mode */
- printk(KERN_ERR "Failed to set scode %d\n", rc);
- }
-
- /* Switch back to indirect-mode */
- memset(indirect_mode, 0, sizeof(indirect_mode));
- indirect_mode[4] = 0x88;
- xc_send_i2c_data(priv, indirect_mode, sizeof(indirect_mode));
- msleep(10);
-
- return 0;
-}
-
-static int check_firmware(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id std, __u16 int_freq)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- struct firmware_properties new_fw;
- int rc = 0, is_retry = 0;
- u16 hwmodel;
- v4l2_std_id std0;
- u8 hw_major, hw_minor, fw_major, fw_minor;
-
- dprintk(1, "%s called\n", __func__);
-
- if (!priv->firm) {
- rc = xc4000_fwupload(fe);
- if (rc < 0)
- return rc;
- }
-
-retry:
- new_fw.type = type;
- new_fw.id = std;
- new_fw.std_req = std;
- new_fw.scode_table = SCODE;
- new_fw.scode_nr = 0;
- new_fw.int_freq = int_freq;
-
- dprintk(1, "checking firmware, user requested type=");
- if (debug) {
- dump_firm_type(new_fw.type);
- printk(KERN_CONT "(%x), id %016llx, ", new_fw.type,
- (unsigned long long)new_fw.std_req);
- if (!int_freq)
- printk(KERN_CONT "scode_tbl ");
- else
- printk(KERN_CONT "int_freq %d, ", new_fw.int_freq);
- printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr);
- }
-
- /* No need to reload base firmware if it matches */
- if (priv->cur_fw.type & BASE) {
- dprintk(1, "BASE firmware not changed.\n");
- goto skip_base;
- }
-
- /* Updating BASE - forget about all currently loaded firmware */
- memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
-
- /* Reset is needed before loading firmware */
- rc = xc4000_tuner_reset(fe);
- if (rc < 0)
- goto fail;
-
- /* BASE firmwares are all std0 */
- std0 = 0;
- rc = load_firmware(fe, BASE, &std0);
- if (rc < 0) {
- printk(KERN_ERR "Error %d while loading base firmware\n", rc);
- goto fail;
- }
-
- /* Load INIT1, if needed */
- dprintk(1, "Load init1 firmware, if exists\n");
-
- rc = load_firmware(fe, BASE | INIT1, &std0);
- if (rc == -ENOENT)
- rc = load_firmware(fe, BASE | INIT1, &std0);
- if (rc < 0 && rc != -ENOENT) {
- tuner_err("Error %d while loading init1 firmware\n",
- rc);
- goto fail;
- }
-
-skip_base:
- /*
- * No need to reload standard specific firmware if base firmware
- * was not reloaded and requested video standards have not changed.
- */
- if (priv->cur_fw.type == (BASE | new_fw.type) &&
- priv->cur_fw.std_req == std) {
- dprintk(1, "Std-specific firmware already loaded.\n");
- goto skip_std_specific;
- }
-
- /* Reloading std-specific firmware forces a SCODE update */
- priv->cur_fw.scode_table = 0;
-
- /* Load the standard firmware */
- rc = load_firmware(fe, new_fw.type, &new_fw.id);
-
- if (rc < 0)
- goto fail;
-
-skip_std_specific:
- if (priv->cur_fw.scode_table == new_fw.scode_table &&
- priv->cur_fw.scode_nr == new_fw.scode_nr) {
- dprintk(1, "SCODE firmware already loaded.\n");
- goto check_device;
- }
-
- /* Load SCODE firmware, if exists */
- rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id,
- new_fw.int_freq, new_fw.scode_nr);
- if (rc != 0)
- dprintk(1, "load scode failed %d\n", rc);
-
-check_device:
- rc = xc4000_readreg(priv, XREG_PRODUCT_ID, &hwmodel);
-
- if (xc_get_version(priv, &hw_major, &hw_minor, &fw_major,
- &fw_minor) != 0) {
- printk(KERN_ERR "Unable to read tuner registers.\n");
- goto fail;
- }
-
- dprintk(1, "Device is Xceive %d version %d.%d, "
- "firmware version %d.%d\n",
- hwmodel, hw_major, hw_minor, fw_major, fw_minor);
-
- /* Check firmware version against what we downloaded. */
- if (priv->firm_version != ((fw_major << 8) | fw_minor)) {
- printk(KERN_WARNING
- "Incorrect readback of firmware version %d.%d.\n",
- fw_major, fw_minor);
- goto fail;
- }
-
- /* Check that the tuner hardware model remains consistent over time. */
- if (priv->hwmodel == 0 &&
- (hwmodel == XC_PRODUCT_ID_XC4000 ||
- hwmodel == XC_PRODUCT_ID_XC4100)) {
- priv->hwmodel = hwmodel;
- priv->hwvers = (hw_major << 8) | hw_minor;
- } else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel ||
- priv->hwvers != ((hw_major << 8) | hw_minor)) {
- printk(KERN_WARNING
- "Read invalid device hardware information - tuner "
- "hung?\n");
- goto fail;
- }
-
- memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw));
-
- /*
- * By setting BASE in cur_fw.type only after successfully loading all
- * firmwares, we can:
- * 1. Identify that BASE firmware with type=0 has been loaded;
- * 2. Tell whether BASE firmware was just changed the next time through.
- */
- priv->cur_fw.type |= BASE;
-
- return 0;
-
-fail:
- memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
- if (!is_retry) {
- msleep(50);
- is_retry = 1;
- dprintk(1, "Retrying firmware load\n");
- goto retry;
- }
-
- if (rc == -ENOENT)
- rc = -EINVAL;
- return rc;
-}
-
-static void xc_debug_dump(struct xc4000_priv *priv)
-{
- u16 adc_envelope;
- u32 freq_error_hz = 0;
- u16 lock_status;
- u32 hsync_freq_hz = 0;
- u16 frame_lines;
- u16 quality;
- u16 signal = 0;
- u16 noise = 0;
- u8 hw_majorversion = 0, hw_minorversion = 0;
- u8 fw_majorversion = 0, fw_minorversion = 0;
-
- xc_get_adc_envelope(priv, &adc_envelope);
- dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
-
- xc_get_frequency_error(priv, &freq_error_hz);
- dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
-
- xc_get_lock_status(priv, &lock_status);
- dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
- lock_status);
-
- xc_get_version(priv, &hw_majorversion, &hw_minorversion,
- &fw_majorversion, &fw_minorversion);
- dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n",
- hw_majorversion, hw_minorversion,
- fw_majorversion, fw_minorversion);
-
- if (priv->video_standard < XC4000_DTV6) {
- xc_get_hsync_freq(priv, &hsync_freq_hz);
- dprintk(1, "*** Horizontal sync frequency = %d Hz\n",
- hsync_freq_hz);
-
- xc_get_frame_lines(priv, &frame_lines);
- dprintk(1, "*** Frame lines = %d\n", frame_lines);
- }
-
- xc_get_quality(priv, &quality);
- dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality);
-
- xc_get_signal_level(priv, &signal);
- dprintk(1, "*** Signal level = -%ddB (%d)\n", signal >> 8, signal);
-
- xc_get_noise_level(priv, &noise);
- dprintk(1, "*** Noise level = %ddB (%d)\n", noise >> 8, noise);
-}
-
-static int xc4000_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- u32 delsys = c->delivery_system;
- u32 bw = c->bandwidth_hz;
- struct xc4000_priv *priv = fe->tuner_priv;
- unsigned int type;
- int ret = -EREMOTEIO;
-
- dprintk(1, "%s() frequency=%d (Hz)\n", __func__, c->frequency);
-
- mutex_lock(&priv->lock);
-
- switch (delsys) {
- case SYS_ATSC:
- dprintk(1, "%s() VSB modulation\n", __func__);
- priv->rf_mode = XC_RF_MODE_AIR;
- priv->freq_hz = c->frequency - 1750000;
- priv->video_standard = XC4000_DTV6;
- type = DTV6;
- break;
- case SYS_DVBC_ANNEX_B:
- dprintk(1, "%s() QAM modulation\n", __func__);
- priv->rf_mode = XC_RF_MODE_CABLE;
- priv->freq_hz = c->frequency - 1750000;
- priv->video_standard = XC4000_DTV6;
- type = DTV6;
- break;
- case SYS_DVBT:
- case SYS_DVBT2:
- dprintk(1, "%s() OFDM\n", __func__);
- if (bw == 0) {
- if (c->frequency < 400000000) {
- priv->freq_hz = c->frequency - 2250000;
- } else {
- priv->freq_hz = c->frequency - 2750000;
- }
- priv->video_standard = XC4000_DTV7_8;
- type = DTV78;
- } else if (bw <= 6000000) {
- priv->video_standard = XC4000_DTV6;
- priv->freq_hz = c->frequency - 1750000;
- type = DTV6;
- } else if (bw <= 7000000) {
- priv->video_standard = XC4000_DTV7;
- priv->freq_hz = c->frequency - 2250000;
- type = DTV7;
- } else {
- priv->video_standard = XC4000_DTV8;
- priv->freq_hz = c->frequency - 2750000;
- type = DTV8;
- }
- priv->rf_mode = XC_RF_MODE_AIR;
- break;
- default:
- printk(KERN_ERR "xc4000 delivery system not supported!\n");
- ret = -EINVAL;
- goto fail;
- }
-
- dprintk(1, "%s() frequency=%d (compensated)\n",
- __func__, priv->freq_hz);
-
- /* Make sure the correct firmware type is loaded */
- if (check_firmware(fe, type, 0, priv->if_khz) != 0)
- goto fail;
-
- priv->bandwidth = c->bandwidth_hz;
-
- ret = xc_set_signal_source(priv, priv->rf_mode);
- if (ret != 0) {
- printk(KERN_ERR "xc4000: xc_set_signal_source(%d) failed\n",
- priv->rf_mode);
- goto fail;
- } else {
- u16 video_mode, audio_mode;
- video_mode = xc4000_standard[priv->video_standard].video_mode;
- audio_mode = xc4000_standard[priv->video_standard].audio_mode;
- if (type == DTV6 && priv->firm_version != 0x0102)
- video_mode |= 0x0001;
- ret = xc_set_tv_standard(priv, video_mode, audio_mode);
- if (ret != 0) {
- printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");
- /* DJH - do not return when it fails... */
- /* goto fail; */
- }
- }
-
- if (xc_write_reg(priv, XREG_D_CODE, 0) == 0)
- ret = 0;
- if (priv->dvb_amplitude != 0) {
- if (xc_write_reg(priv, XREG_AMPLITUDE,
- (priv->firm_version != 0x0102 ||
- priv->dvb_amplitude != 134 ?
- priv->dvb_amplitude : 132)) != 0)
- ret = -EREMOTEIO;
- }
- if (priv->set_smoothedcvbs != 0) {
- if (xc_write_reg(priv, XREG_SMOOTHEDCVBS, 1) != 0)
- ret = -EREMOTEIO;
- }
- if (ret != 0) {
- printk(KERN_ERR "xc4000: setting registers failed\n");
- /* goto fail; */
- }
-
- xc_tune_channel(priv, priv->freq_hz);
-
- ret = 0;
-
-fail:
- mutex_unlock(&priv->lock);
-
- return ret;
-}
-
-static int xc4000_set_analog_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- unsigned int type = 0;
- int ret = -EREMOTEIO;
-
- if (params->mode == V4L2_TUNER_RADIO) {
- dprintk(1, "%s() frequency=%d (in units of 62.5Hz)\n",
- __func__, params->frequency);
-
- mutex_lock(&priv->lock);
-
- params->std = 0;
- priv->freq_hz = params->frequency * 125L / 2;
-
- if (audio_std & XC4000_AUDIO_STD_INPUT1) {
- priv->video_standard = XC4000_FM_Radio_INPUT1;
- type = FM | INPUT1;
- } else {
- priv->video_standard = XC4000_FM_Radio_INPUT2;
- type = FM | INPUT2;
- }
-
- goto tune_channel;
- }
-
- dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
- __func__, params->frequency);
-
- mutex_lock(&priv->lock);
-
- /* params->frequency is in units of 62.5khz */
- priv->freq_hz = params->frequency * 62500;
-
- params->std &= V4L2_STD_ALL;
- /* if std is not defined, choose one */
- if (!params->std)
- params->std = V4L2_STD_PAL_BG;
-
- if (audio_std & XC4000_AUDIO_STD_MONO)
- type = MONO;
-
- if (params->std & V4L2_STD_MN) {
- params->std = V4L2_STD_MN;
- if (audio_std & XC4000_AUDIO_STD_MONO) {
- priv->video_standard = XC4000_MN_NTSC_PAL_Mono;
- } else if (audio_std & XC4000_AUDIO_STD_A2) {
- params->std |= V4L2_STD_A2;
- priv->video_standard = XC4000_MN_NTSC_PAL_A2;
- } else {
- params->std |= V4L2_STD_BTSC;
- priv->video_standard = XC4000_MN_NTSC_PAL_BTSC;
- }
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_PAL_BG) {
- params->std = V4L2_STD_PAL_BG;
- if (audio_std & XC4000_AUDIO_STD_MONO) {
- priv->video_standard = XC4000_BG_PAL_MONO;
- } else if (!(audio_std & XC4000_AUDIO_STD_A2)) {
- if (!(audio_std & XC4000_AUDIO_STD_B)) {
- params->std |= V4L2_STD_NICAM_A;
- priv->video_standard = XC4000_BG_PAL_NICAM;
- } else {
- params->std |= V4L2_STD_NICAM_B;
- priv->video_standard = XC4000_BG_PAL_NICAM;
- }
- } else {
- if (!(audio_std & XC4000_AUDIO_STD_B)) {
- params->std |= V4L2_STD_A2_A;
- priv->video_standard = XC4000_BG_PAL_A2;
- } else {
- params->std |= V4L2_STD_A2_B;
- priv->video_standard = XC4000_BG_PAL_A2;
- }
- }
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_PAL_I) {
- /* default to NICAM audio standard */
- params->std = V4L2_STD_PAL_I | V4L2_STD_NICAM;
- if (audio_std & XC4000_AUDIO_STD_MONO)
- priv->video_standard = XC4000_I_PAL_NICAM_MONO;
- else
- priv->video_standard = XC4000_I_PAL_NICAM;
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_PAL_DK) {
- params->std = V4L2_STD_PAL_DK;
- if (audio_std & XC4000_AUDIO_STD_MONO) {
- priv->video_standard = XC4000_DK_PAL_MONO;
- } else if (audio_std & XC4000_AUDIO_STD_A2) {
- params->std |= V4L2_STD_A2;
- priv->video_standard = XC4000_DK_PAL_A2;
- } else {
- params->std |= V4L2_STD_NICAM;
- priv->video_standard = XC4000_DK_PAL_NICAM;
- }
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_SECAM_DK) {
- /* default to A2 audio standard */
- params->std = V4L2_STD_SECAM_DK | V4L2_STD_A2;
- if (audio_std & XC4000_AUDIO_STD_L) {
- type = 0;
- priv->video_standard = XC4000_DK_SECAM_NICAM;
- } else if (audio_std & XC4000_AUDIO_STD_MONO) {
- priv->video_standard = XC4000_DK_SECAM_A2MONO;
- } else if (audio_std & XC4000_AUDIO_STD_K3) {
- params->std |= V4L2_STD_SECAM_K3;
- priv->video_standard = XC4000_DK_SECAM_A2LDK3;
- } else {
- priv->video_standard = XC4000_DK_SECAM_A2DK1;
- }
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_SECAM_L) {
- /* default to NICAM audio standard */
- type = 0;
- params->std = V4L2_STD_SECAM_L | V4L2_STD_NICAM;
- priv->video_standard = XC4000_L_SECAM_NICAM;
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_SECAM_LC) {
- /* default to NICAM audio standard */
- type = 0;
- params->std = V4L2_STD_SECAM_LC | V4L2_STD_NICAM;
- priv->video_standard = XC4000_LC_SECAM_NICAM;
- goto tune_channel;
- }
-
-tune_channel:
- /* FIXME: it could be air. */
- priv->rf_mode = XC_RF_MODE_CABLE;
-
- if (check_firmware(fe, type, params->std,
- xc4000_standard[priv->video_standard].int_freq) != 0)
- goto fail;
-
- ret = xc_set_signal_source(priv, priv->rf_mode);
- if (ret != 0) {
- printk(KERN_ERR
- "xc4000: xc_set_signal_source(%d) failed\n",
- priv->rf_mode);
- goto fail;
- } else {
- u16 video_mode, audio_mode;
- video_mode = xc4000_standard[priv->video_standard].video_mode;
- audio_mode = xc4000_standard[priv->video_standard].audio_mode;
- if (priv->video_standard < XC4000_BG_PAL_A2) {
- if (type & NOGD)
- video_mode &= 0xFF7F;
- } else if (priv->video_standard < XC4000_I_PAL_NICAM) {
- if (priv->firm_version == 0x0102)
- video_mode &= 0xFEFF;
- if (audio_std & XC4000_AUDIO_STD_B)
- video_mode |= 0x0080;
- }
- ret = xc_set_tv_standard(priv, video_mode, audio_mode);
- if (ret != 0) {
- printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");
- goto fail;
- }
- }
-
- if (xc_write_reg(priv, XREG_D_CODE, 0) == 0)
- ret = 0;
- if (xc_write_reg(priv, XREG_AMPLITUDE, 1) != 0)
- ret = -EREMOTEIO;
- if (priv->set_smoothedcvbs != 0) {
- if (xc_write_reg(priv, XREG_SMOOTHEDCVBS, 1) != 0)
- ret = -EREMOTEIO;
- }
- if (ret != 0) {
- printk(KERN_ERR "xc4000: setting registers failed\n");
- goto fail;
- }
-
- xc_tune_channel(priv, priv->freq_hz);
-
- ret = 0;
-
-fail:
- mutex_unlock(&priv->lock);
-
- return ret;
-}
-
-static int xc4000_get_signal(struct dvb_frontend *fe, u16 *strength)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- u16 value = 0;
- int rc;
-
- mutex_lock(&priv->lock);
- rc = xc4000_readreg(priv, XREG_SIGNAL_LEVEL, &value);
- mutex_unlock(&priv->lock);
-
- if (rc < 0)
- goto ret;
-
- /* Informations from real testing of DVB-T and radio part,
- coeficient for one dB is 0xff.
- */
- tuner_dbg("Signal strength: -%ddB (%05d)\n", value >> 8, value);
-
- /* all known digital modes */
- if ((priv->video_standard == XC4000_DTV6) ||
- (priv->video_standard == XC4000_DTV7) ||
- (priv->video_standard == XC4000_DTV7_8) ||
- (priv->video_standard == XC4000_DTV8))
- goto digital;
-
- /* Analog mode has NOISE LEVEL important, signal
- depends only on gain of antenna and amplifiers,
- but it doesn't tell anything about real quality
- of reception.
- */
- mutex_lock(&priv->lock);
- rc = xc4000_readreg(priv, XREG_NOISE_LEVEL, &value);
- mutex_unlock(&priv->lock);
-
- tuner_dbg("Noise level: %ddB (%05d)\n", value >> 8, value);
-
- /* highest noise level: 32dB */
- if (value >= 0x2000) {
- value = 0;
- } else {
- value = ~value << 3;
- }
-
- goto ret;
-
- /* Digital mode has SIGNAL LEVEL important and real
- noise level is stored in demodulator registers.
- */
-digital:
- /* best signal: -50dB */
- if (value <= 0x3200) {
- value = 0xffff;
- /* minimum: -114dB - should be 0x7200 but real zero is 0x713A */
- } else if (value >= 0x713A) {
- value = 0;
- } else {
- value = ~(value - 0x3200) << 2;
- }
-
-ret:
- *strength = value;
-
- return rc;
-}
-
-static int xc4000_get_frequency(struct dvb_frontend *fe, u32 *freq)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
-
- *freq = priv->freq_hz;
-
- if (debug) {
- mutex_lock(&priv->lock);
- if ((priv->cur_fw.type
- & (BASE | FM | DTV6 | DTV7 | DTV78 | DTV8)) == BASE) {
- u16 snr = 0;
- if (xc4000_readreg(priv, XREG_SNR, &snr) == 0) {
- mutex_unlock(&priv->lock);
- dprintk(1, "%s() freq = %u, SNR = %d\n",
- __func__, *freq, snr);
- return 0;
- }
- }
- mutex_unlock(&priv->lock);
- }
-
- dprintk(1, "%s()\n", __func__);
-
- return 0;
-}
-
-static int xc4000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- dprintk(1, "%s()\n", __func__);
-
- *bw = priv->bandwidth;
- return 0;
-}
-
-static int xc4000_get_status(struct dvb_frontend *fe, u32 *status)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- u16 lock_status = 0;
-
- mutex_lock(&priv->lock);
-
- if (priv->cur_fw.type & BASE)
- xc_get_lock_status(priv, &lock_status);
-
- *status = (lock_status == 1 ?
- TUNER_STATUS_LOCKED | TUNER_STATUS_STEREO : 0);
- if (priv->cur_fw.type & (DTV6 | DTV7 | DTV78 | DTV8))
- *status &= (~TUNER_STATUS_STEREO);
-
- mutex_unlock(&priv->lock);
-
- dprintk(2, "%s() lock_status = %d\n", __func__, lock_status);
-
- return 0;
-}
-
-static int xc4000_sleep(struct dvb_frontend *fe)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
- int ret = 0;
-
- dprintk(1, "%s()\n", __func__);
-
- mutex_lock(&priv->lock);
-
- /* Avoid firmware reload on slow devices */
- if ((no_poweroff == 2 ||
- (no_poweroff == 0 && priv->default_pm != 0)) &&
- (priv->cur_fw.type & BASE) != 0) {
- /* force reset and firmware reload */
- priv->cur_fw.type = XC_POWERED_DOWN;
-
- if (xc_write_reg(priv, XREG_POWER_DOWN, 0) != 0) {
- printk(KERN_ERR
- "xc4000: %s() unable to shutdown tuner\n",
- __func__);
- ret = -EREMOTEIO;
- }
- msleep(20);
- }
-
- mutex_unlock(&priv->lock);
-
- return ret;
-}
-
-static int xc4000_init(struct dvb_frontend *fe)
-{
- dprintk(1, "%s()\n", __func__);
-
- return 0;
-}
-
-static int xc4000_release(struct dvb_frontend *fe)
-{
- struct xc4000_priv *priv = fe->tuner_priv;
-
- dprintk(1, "%s()\n", __func__);
-
- mutex_lock(&xc4000_list_mutex);
-
- if (priv)
- hybrid_tuner_release_state(priv);
-
- mutex_unlock(&xc4000_list_mutex);
-
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static const struct dvb_tuner_ops xc4000_tuner_ops = {
- .info = {
- .name = "Xceive XC4000",
- .frequency_min = 1000000,
- .frequency_max = 1023000000,
- .frequency_step = 50000,
- },
-
- .release = xc4000_release,
- .init = xc4000_init,
- .sleep = xc4000_sleep,
-
- .set_params = xc4000_set_params,
- .set_analog_params = xc4000_set_analog_params,
- .get_frequency = xc4000_get_frequency,
- .get_rf_strength = xc4000_get_signal,
- .get_bandwidth = xc4000_get_bandwidth,
- .get_status = xc4000_get_status
-};
-
-struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct xc4000_config *cfg)
-{
- struct xc4000_priv *priv = NULL;
- int instance;
- u16 id = 0;
-
- dprintk(1, "%s(%d-%04x)\n", __func__,
- i2c ? i2c_adapter_id(i2c) : -1,
- cfg ? cfg->i2c_address : -1);
-
- mutex_lock(&xc4000_list_mutex);
-
- instance = hybrid_tuner_request_state(struct xc4000_priv, priv,
- hybrid_tuner_instance_list,
- i2c, cfg->i2c_address, "xc4000");
- switch (instance) {
- case 0:
- goto fail;
- break;
- case 1:
- /* new tuner instance */
- priv->bandwidth = 6000000;
- /* set default configuration */
- priv->if_khz = 4560;
- priv->default_pm = 0;
- priv->dvb_amplitude = 134;
- priv->set_smoothedcvbs = 1;
- mutex_init(&priv->lock);
- fe->tuner_priv = priv;
- break;
- default:
- /* existing tuner instance */
- fe->tuner_priv = priv;
- break;
- }
-
- if (cfg->if_khz != 0) {
- /* copy configuration if provided by the caller */
- priv->if_khz = cfg->if_khz;
- priv->default_pm = cfg->default_pm;
- priv->dvb_amplitude = cfg->dvb_amplitude;
- priv->set_smoothedcvbs = cfg->set_smoothedcvbs;
- }
-
- /* Check if firmware has been loaded. It is possible that another
- instance of the driver has loaded the firmware.
- */
-
- if (instance == 1) {
- if (xc4000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
- goto fail;
- } else {
- id = ((priv->cur_fw.type & BASE) != 0 ?
- priv->hwmodel : XC_PRODUCT_ID_FW_NOT_LOADED);
- }
-
- switch (id) {
- case XC_PRODUCT_ID_XC4000:
- case XC_PRODUCT_ID_XC4100:
- printk(KERN_INFO
- "xc4000: Successfully identified at address 0x%02x\n",
- cfg->i2c_address);
- printk(KERN_INFO
- "xc4000: Firmware has been loaded previously\n");
- break;
- case XC_PRODUCT_ID_FW_NOT_LOADED:
- printk(KERN_INFO
- "xc4000: Successfully identified at address 0x%02x\n",
- cfg->i2c_address);
- printk(KERN_INFO
- "xc4000: Firmware has not been loaded previously\n");
- break;
- default:
- printk(KERN_ERR
- "xc4000: Device not found at addr 0x%02x (0x%x)\n",
- cfg->i2c_address, id);
- goto fail;
- }
-
- mutex_unlock(&xc4000_list_mutex);
-
- memcpy(&fe->ops.tuner_ops, &xc4000_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- if (instance == 1) {
- int ret;
- mutex_lock(&priv->lock);
- ret = xc4000_fwupload(fe);
- mutex_unlock(&priv->lock);
- if (ret != 0)
- goto fail2;
- }
-
- return fe;
-fail:
- mutex_unlock(&xc4000_list_mutex);
-fail2:
- xc4000_release(fe);
- return NULL;
-}
-EXPORT_SYMBOL(xc4000_attach);
-
-MODULE_AUTHOR("Steven Toth, Davide Ferri");
-MODULE_DESCRIPTION("Xceive xc4000 silicon tuner driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/xc4000.h b/drivers/media/common/tuners/xc4000.h
deleted file mode 100644
index e6a44d1..0000000
--- a/drivers/media/common/tuners/xc4000.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Driver for Xceive XC4000 "QAM/8VSB single chip tuner"
- *
- * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __XC4000_H__
-#define __XC4000_H__
-
-#include <linux/firmware.h>
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-struct xc4000_config {
- u8 i2c_address;
- /* if non-zero, power management is enabled by default */
- u8 default_pm;
- /* value to be written to XREG_AMPLITUDE in DVB-T mode (0: no write) */
- u8 dvb_amplitude;
- /* if non-zero, register 0x0E is set to filter analog TV video output */
- u8 set_smoothedcvbs;
- /* IF for DVB-T */
- u32 if_khz;
-};
-
-/* xc4000 callback command */
-#define XC4000_TUNER_RESET 0
-
-/* For each bridge framework, when it attaches either analog or digital,
- * it has to store a reference back to its _core equivalent structure,
- * so that it can service the hardware by steering gpio's etc.
- * Each bridge implementation is different so cast devptr accordingly.
- * The xc4000 driver cares not for this value, other than ensuring
- * it's passed back to a bridge during tuner_callback().
- */
-
-#if defined(CONFIG_MEDIA_TUNER_XC4000) || (defined(CONFIG_MEDIA_TUNER_XC4000_MODULE) && defined(MODULE))
-extern struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct xc4000_config *cfg);
-#else
-static inline struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct xc4000_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
deleted file mode 100644
index dc93cf3..0000000
--- a/drivers/media/common/tuners/xc5000.c
+++ /dev/null
@@ -1,1366 +0,0 @@
-/*
- * Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
- *
- * Copyright (c) 2007 Xceive Corporation
- * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
- * Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/videodev2.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-
-#include "dvb_frontend.h"
-
-#include "xc5000.h"
-#include "tuner-i2c.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-static int no_poweroff;
-module_param(no_poweroff, int, 0644);
-MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n"
- "\t\t1 keep device energized and with tuner ready all the times.\n"
- "\t\tFaster, but consumes more power and keeps the device hotter");
-
-static DEFINE_MUTEX(xc5000_list_mutex);
-static LIST_HEAD(hybrid_tuner_instance_list);
-
-#define dprintk(level, fmt, arg...) if (debug >= level) \
- printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
-
-struct xc5000_priv {
- struct tuner_i2c_props i2c_props;
- struct list_head hybrid_tuner_instance_list;
-
- u32 if_khz;
- u16 xtal_khz;
- u32 freq_hz;
- u32 bandwidth;
- u8 video_standard;
- u8 rf_mode;
- u8 radio_input;
-
- int chip_id;
- u16 pll_register_no;
- u8 init_status_supported;
- u8 fw_checksum_supported;
-};
-
-/* Misc Defines */
-#define MAX_TV_STANDARD 24
-#define XC_MAX_I2C_WRITE_LENGTH 64
-
-/* Signal Types */
-#define XC_RF_MODE_AIR 0
-#define XC_RF_MODE_CABLE 1
-
-/* Result codes */
-#define XC_RESULT_SUCCESS 0
-#define XC_RESULT_RESET_FAILURE 1
-#define XC_RESULT_I2C_WRITE_FAILURE 2
-#define XC_RESULT_I2C_READ_FAILURE 3
-#define XC_RESULT_OUT_OF_RANGE 5
-
-/* Product id */
-#define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000
-#define XC_PRODUCT_ID_FW_LOADED 0x1388
-
-/* Registers */
-#define XREG_INIT 0x00
-#define XREG_VIDEO_MODE 0x01
-#define XREG_AUDIO_MODE 0x02
-#define XREG_RF_FREQ 0x03
-#define XREG_D_CODE 0x04
-#define XREG_IF_OUT 0x05
-#define XREG_SEEK_MODE 0x07
-#define XREG_POWER_DOWN 0x0A /* Obsolete */
-/* Set the output amplitude - SIF for analog, DTVP/DTVN for digital */
-#define XREG_OUTPUT_AMP 0x0B
-#define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */
-#define XREG_SMOOTHEDCVBS 0x0E
-#define XREG_XTALFREQ 0x0F
-#define XREG_FINERFREQ 0x10
-#define XREG_DDIMODE 0x11
-
-#define XREG_ADC_ENV 0x00
-#define XREG_QUALITY 0x01
-#define XREG_FRAME_LINES 0x02
-#define XREG_HSYNC_FREQ 0x03
-#define XREG_LOCK 0x04
-#define XREG_FREQ_ERROR 0x05
-#define XREG_SNR 0x06
-#define XREG_VERSION 0x07
-#define XREG_PRODUCT_ID 0x08
-#define XREG_BUSY 0x09
-#define XREG_BUILD 0x0D
-#define XREG_TOTALGAIN 0x0F
-#define XREG_FW_CHECKSUM 0x12
-#define XREG_INIT_STATUS 0x13
-
-/*
- Basic firmware description. This will remain with
- the driver for documentation purposes.
-
- This represents an I2C firmware file encoded as a
- string of unsigned char. Format is as follows:
-
- char[0 ]=len0_MSB -> len = len_MSB * 256 + len_LSB
- char[1 ]=len0_LSB -> length of first write transaction
- char[2 ]=data0 -> first byte to be sent
- char[3 ]=data1
- char[4 ]=data2
- char[ ]=...
- char[M ]=dataN -> last byte to be sent
- char[M+1]=len1_MSB -> len = len_MSB * 256 + len_LSB
- char[M+2]=len1_LSB -> length of second write transaction
- char[M+3]=data0
- char[M+4]=data1
- ...
- etc.
-
- The [len] value should be interpreted as follows:
-
- len= len_MSB _ len_LSB
- len=1111_1111_1111_1111 : End of I2C_SEQUENCE
- len=0000_0000_0000_0000 : Reset command: Do hardware reset
- len=0NNN_NNNN_NNNN_NNNN : Normal transaction: number of bytes = {1:32767)
- len=1WWW_WWWW_WWWW_WWWW : Wait command: wait for {1:32767} ms
-
- For the RESET and WAIT commands, the two following bytes will contain
- immediately the length of the following transaction.
-
-*/
-struct XC_TV_STANDARD {
- char *Name;
- u16 AudioMode;
- u16 VideoMode;
-};
-
-/* Tuner standards */
-#define MN_NTSC_PAL_BTSC 0
-#define MN_NTSC_PAL_A2 1
-#define MN_NTSC_PAL_EIAJ 2
-#define MN_NTSC_PAL_Mono 3
-#define BG_PAL_A2 4
-#define BG_PAL_NICAM 5
-#define BG_PAL_MONO 6
-#define I_PAL_NICAM 7
-#define I_PAL_NICAM_MONO 8
-#define DK_PAL_A2 9
-#define DK_PAL_NICAM 10
-#define DK_PAL_MONO 11
-#define DK_SECAM_A2DK1 12
-#define DK_SECAM_A2LDK3 13
-#define DK_SECAM_A2MONO 14
-#define L_SECAM_NICAM 15
-#define LC_SECAM_NICAM 16
-#define DTV6 17
-#define DTV8 18
-#define DTV7_8 19
-#define DTV7 20
-#define FM_Radio_INPUT2 21
-#define FM_Radio_INPUT1 22
-#define FM_Radio_INPUT1_MONO 23
-
-static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
- {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
- {"M/N-NTSC/PAL-A2", 0x0600, 0x8020},
- {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
- {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020},
- {"B/G-PAL-A2", 0x0A00, 0x8049},
- {"B/G-PAL-NICAM", 0x0C04, 0x8049},
- {"B/G-PAL-MONO", 0x0878, 0x8059},
- {"I-PAL-NICAM", 0x1080, 0x8009},
- {"I-PAL-NICAM-MONO", 0x0E78, 0x8009},
- {"D/K-PAL-A2", 0x1600, 0x8009},
- {"D/K-PAL-NICAM", 0x0E80, 0x8009},
- {"D/K-PAL-MONO", 0x1478, 0x8009},
- {"D/K-SECAM-A2 DK1", 0x1200, 0x8009},
- {"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009},
- {"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
- {"L-SECAM-NICAM", 0x8E82, 0x0009},
- {"L'-SECAM-NICAM", 0x8E82, 0x4009},
- {"DTV6", 0x00C0, 0x8002},
- {"DTV8", 0x00C0, 0x800B},
- {"DTV7/8", 0x00C0, 0x801B},
- {"DTV7", 0x00C0, 0x8007},
- {"FM Radio-INPUT2", 0x9802, 0x9002},
- {"FM Radio-INPUT1", 0x0208, 0x9002},
- {"FM Radio-INPUT1_MONO", 0x0278, 0x9002}
-};
-
-
-struct xc5000_fw_cfg {
- char *name;
- u16 size;
- u16 pll_reg;
- u8 init_status_supported;
- u8 fw_checksum_supported;
-};
-
-#define XC5000A_FIRMWARE "dvb-fe-xc5000-1.6.114.fw"
-static const struct xc5000_fw_cfg xc5000a_1_6_114 = {
- .name = XC5000A_FIRMWARE,
- .size = 12401,
- .pll_reg = 0x806c,
-};
-
-#define XC5000C_FIRMWARE "dvb-fe-xc5000c-4.1.30.7.fw"
-static const struct xc5000_fw_cfg xc5000c_41_024_5 = {
- .name = XC5000C_FIRMWARE,
- .size = 16497,
- .pll_reg = 0x13,
- .init_status_supported = 1,
- .fw_checksum_supported = 1,
-};
-
-static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
-{
- switch (chip_id) {
- default:
- case XC5000A:
- return &xc5000a_1_6_114;
- case XC5000C:
- return &xc5000c_41_024_5;
- }
-}
-
-static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force);
-static int xc5000_is_firmware_loaded(struct dvb_frontend *fe);
-static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val);
-static int xc5000_TunerReset(struct dvb_frontend *fe);
-
-static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
-{
- struct i2c_msg msg = { .addr = priv->i2c_props.addr,
- .flags = 0, .buf = buf, .len = len };
-
- if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
- printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len);
- return XC_RESULT_I2C_WRITE_FAILURE;
- }
- return XC_RESULT_SUCCESS;
-}
-
-#if 0
-/* This routine is never used because the only time we read data from the
- i2c bus is when we read registers, and we want that to be an atomic i2c
- transaction in case we are on a multi-master bus */
-static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
-{
- struct i2c_msg msg = { .addr = priv->i2c_props.addr,
- .flags = I2C_M_RD, .buf = buf, .len = len };
-
- if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
- printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len);
- return -EREMOTEIO;
- }
- return 0;
-}
-#endif
-
-static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
-{
- u8 buf[2] = { reg >> 8, reg & 0xff };
- u8 bval[2] = { 0, 0 };
- struct i2c_msg msg[2] = {
- { .addr = priv->i2c_props.addr,
- .flags = 0, .buf = &buf[0], .len = 2 },
- { .addr = priv->i2c_props.addr,
- .flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
- };
-
- if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
- printk(KERN_WARNING "xc5000: I2C read failed\n");
- return -EREMOTEIO;
- }
-
- *val = (bval[0] << 8) | bval[1];
- return XC_RESULT_SUCCESS;
-}
-
-static void xc_wait(int wait_ms)
-{
- msleep(wait_ms);
-}
-
-static int xc5000_TunerReset(struct dvb_frontend *fe)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- int ret;
-
- dprintk(1, "%s()\n", __func__);
-
- if (fe->callback) {
- ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
- fe->dvb->priv :
- priv->i2c_props.adap->algo_data,
- DVB_FRONTEND_COMPONENT_TUNER,
- XC5000_TUNER_RESET, 0);
- if (ret) {
- printk(KERN_ERR "xc5000: reset failed\n");
- return XC_RESULT_RESET_FAILURE;
- }
- } else {
- printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
- return XC_RESULT_RESET_FAILURE;
- }
- return XC_RESULT_SUCCESS;
-}
-
-static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
-{
- u8 buf[4];
- int WatchDogTimer = 100;
- int result;
-
- buf[0] = (regAddr >> 8) & 0xFF;
- buf[1] = regAddr & 0xFF;
- buf[2] = (i2cData >> 8) & 0xFF;
- buf[3] = i2cData & 0xFF;
- result = xc_send_i2c_data(priv, buf, 4);
- if (result == XC_RESULT_SUCCESS) {
- /* wait for busy flag to clear */
- while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) {
- result = xc5000_readreg(priv, XREG_BUSY, (u16 *)buf);
- if (result == XC_RESULT_SUCCESS) {
- if ((buf[0] == 0) && (buf[1] == 0)) {
- /* busy flag cleared */
- break;
- } else {
- xc_wait(5); /* wait 5 ms */
- WatchDogTimer--;
- }
- }
- }
- }
- if (WatchDogTimer <= 0)
- result = XC_RESULT_I2C_WRITE_FAILURE;
-
- return result;
-}
-
-static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
-
- int i, nbytes_to_send, result;
- unsigned int len, pos, index;
- u8 buf[XC_MAX_I2C_WRITE_LENGTH];
-
- index = 0;
- while ((i2c_sequence[index] != 0xFF) ||
- (i2c_sequence[index + 1] != 0xFF)) {
- len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
- if (len == 0x0000) {
- /* RESET command */
- result = xc5000_TunerReset(fe);
- index += 2;
- if (result != XC_RESULT_SUCCESS)
- return result;
- } else if (len & 0x8000) {
- /* WAIT command */
- xc_wait(len & 0x7FFF);
- index += 2;
- } else {
- /* Send i2c data whilst ensuring individual transactions
- * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
- */
- index += 2;
- buf[0] = i2c_sequence[index];
- buf[1] = i2c_sequence[index + 1];
- pos = 2;
- while (pos < len) {
- if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
- nbytes_to_send =
- XC_MAX_I2C_WRITE_LENGTH;
- else
- nbytes_to_send = (len - pos + 2);
- for (i = 2; i < nbytes_to_send; i++) {
- buf[i] = i2c_sequence[index + pos +
- i - 2];
- }
- result = xc_send_i2c_data(priv, buf,
- nbytes_to_send);
-
- if (result != XC_RESULT_SUCCESS)
- return result;
-
- pos += nbytes_to_send - 2;
- }
- index += len;
- }
- }
- return XC_RESULT_SUCCESS;
-}
-
-static int xc_initialize(struct xc5000_priv *priv)
-{
- dprintk(1, "%s()\n", __func__);
- return xc_write_reg(priv, XREG_INIT, 0);
-}
-
-static int xc_SetTVStandard(struct xc5000_priv *priv,
- u16 VideoMode, u16 AudioMode)
-{
- int ret;
- dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, VideoMode, AudioMode);
- dprintk(1, "%s() Standard = %s\n",
- __func__,
- XC5000_Standard[priv->video_standard].Name);
-
- ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode);
- if (ret == XC_RESULT_SUCCESS)
- ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode);
-
- return ret;
-}
-
-static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode)
-{
- dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
- rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
-
- if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
- rf_mode = XC_RF_MODE_CABLE;
- printk(KERN_ERR
- "%s(), Invalid mode, defaulting to CABLE",
- __func__);
- }
- return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
-}
-
-static const struct dvb_tuner_ops xc5000_tuner_ops;
-
-static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz)
-{
- u16 freq_code;
-
- dprintk(1, "%s(%u)\n", __func__, freq_hz);
-
- if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
- (freq_hz < xc5000_tuner_ops.info.frequency_min))
- return XC_RESULT_OUT_OF_RANGE;
-
- freq_code = (u16)(freq_hz / 15625);
-
- /* Starting in firmware version 1.1.44, Xceive recommends using the
- FINERFREQ for all normal tuning (the doc indicates reg 0x03 should
- only be used for fast scanning for channel lock) */
- return xc_write_reg(priv, XREG_FINERFREQ, freq_code);
-}
-
-
-static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
-{
- u32 freq_code = (freq_khz * 1024)/1000;
- dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",
- __func__, freq_khz, freq_code);
-
- return xc_write_reg(priv, XREG_IF_OUT, freq_code);
-}
-
-
-static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope)
-{
- return xc5000_readreg(priv, XREG_ADC_ENV, adc_envelope);
-}
-
-static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
-{
- int result;
- u16 regData;
- u32 tmp;
-
- result = xc5000_readreg(priv, XREG_FREQ_ERROR, ®Data);
- if (result != XC_RESULT_SUCCESS)
- return result;
-
- tmp = (u32)regData;
- (*freq_error_hz) = (tmp * 15625) / 1000;
- return result;
-}
-
-static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
-{
- return xc5000_readreg(priv, XREG_LOCK, lock_status);
-}
-
-static int xc_get_version(struct xc5000_priv *priv,
- u8 *hw_majorversion, u8 *hw_minorversion,
- u8 *fw_majorversion, u8 *fw_minorversion)
-{
- u16 data;
- int result;
-
- result = xc5000_readreg(priv, XREG_VERSION, &data);
- if (result != XC_RESULT_SUCCESS)
- return result;
-
- (*hw_majorversion) = (data >> 12) & 0x0F;
- (*hw_minorversion) = (data >> 8) & 0x0F;
- (*fw_majorversion) = (data >> 4) & 0x0F;
- (*fw_minorversion) = data & 0x0F;
-
- return 0;
-}
-
-static int xc_get_buildversion(struct xc5000_priv *priv, u16 *buildrev)
-{
- return xc5000_readreg(priv, XREG_BUILD, buildrev);
-}
-
-static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
-{
- u16 regData;
- int result;
-
- result = xc5000_readreg(priv, XREG_HSYNC_FREQ, ®Data);
- if (result != XC_RESULT_SUCCESS)
- return result;
-
- (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
- return result;
-}
-
-static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
-{
- return xc5000_readreg(priv, XREG_FRAME_LINES, frame_lines);
-}
-
-static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
-{
- return xc5000_readreg(priv, XREG_QUALITY, quality);
-}
-
-static int xc_get_analogsnr(struct xc5000_priv *priv, u16 *snr)
-{
- return xc5000_readreg(priv, XREG_SNR, snr);
-}
-
-static int xc_get_totalgain(struct xc5000_priv *priv, u16 *totalgain)
-{
- return xc5000_readreg(priv, XREG_TOTALGAIN, totalgain);
-}
-
-static u16 WaitForLock(struct xc5000_priv *priv)
-{
- u16 lockState = 0;
- int watchDogCount = 40;
-
- while ((lockState == 0) && (watchDogCount > 0)) {
- xc_get_lock_status(priv, &lockState);
- if (lockState != 1) {
- xc_wait(5);
- watchDogCount--;
- }
- }
- return lockState;
-}
-
-#define XC_TUNE_ANALOG 0
-#define XC_TUNE_DIGITAL 1
-static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
-{
- int found = 0;
-
- dprintk(1, "%s(%u)\n", __func__, freq_hz);
-
- if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS)
- return 0;
-
- if (mode == XC_TUNE_ANALOG) {
- if (WaitForLock(priv) == 1)
- found = 1;
- }
-
- return found;
-}
-
-static int xc_set_xtal(struct dvb_frontend *fe)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- int ret = XC_RESULT_SUCCESS;
-
- switch (priv->chip_id) {
- default:
- case XC5000A:
- /* 32.000 MHz xtal is default */
- break;
- case XC5000C:
- switch (priv->xtal_khz) {
- default:
- case 32000:
- /* 32.000 MHz xtal is default */
- break;
- case 31875:
- /* 31.875 MHz xtal configuration */
- ret = xc_write_reg(priv, 0x000f, 0x8081);
- break;
- }
- break;
- }
- return ret;
-}
-
-static int xc5000_fwupload(struct dvb_frontend *fe)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- const struct firmware *fw;
- int ret;
- const struct xc5000_fw_cfg *desired_fw =
- xc5000_assign_firmware(priv->chip_id);
- priv->pll_register_no = desired_fw->pll_reg;
- priv->init_status_supported = desired_fw->init_status_supported;
- priv->fw_checksum_supported = desired_fw->fw_checksum_supported;
-
- /* request the firmware, this will block and timeout */
- printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n",
- desired_fw->name);
-
- ret = request_firmware(&fw, desired_fw->name,
- priv->i2c_props.adap->dev.parent);
- if (ret) {
- printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
- ret = XC_RESULT_RESET_FAILURE;
- goto out;
- } else {
- printk(KERN_DEBUG "xc5000: firmware read %Zu bytes.\n",
- fw->size);
- ret = XC_RESULT_SUCCESS;
- }
-
- if (fw->size != desired_fw->size) {
- printk(KERN_ERR "xc5000: firmware incorrect size\n");
- ret = XC_RESULT_RESET_FAILURE;
- } else {
- printk(KERN_INFO "xc5000: firmware uploading...\n");
- ret = xc_load_i2c_sequence(fe, fw->data);
- if (XC_RESULT_SUCCESS == ret)
- ret = xc_set_xtal(fe);
- if (XC_RESULT_SUCCESS == ret)
- printk(KERN_INFO "xc5000: firmware upload complete...\n");
- else
- printk(KERN_ERR "xc5000: firmware upload failed...\n");
- }
-
-out:
- release_firmware(fw);
- return ret;
-}
-
-static void xc_debug_dump(struct xc5000_priv *priv)
-{
- u16 adc_envelope;
- u32 freq_error_hz = 0;
- u16 lock_status;
- u32 hsync_freq_hz = 0;
- u16 frame_lines;
- u16 quality;
- u16 snr;
- u16 totalgain;
- u8 hw_majorversion = 0, hw_minorversion = 0;
- u8 fw_majorversion = 0, fw_minorversion = 0;
- u16 fw_buildversion = 0;
- u16 regval;
-
- /* Wait for stats to stabilize.
- * Frame Lines needs two frame times after initial lock
- * before it is valid.
- */
- xc_wait(100);
-
- xc_get_ADC_Envelope(priv, &adc_envelope);
- dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
-
- xc_get_frequency_error(priv, &freq_error_hz);
- dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
-
- xc_get_lock_status(priv, &lock_status);
- dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
- lock_status);
-
- xc_get_version(priv, &hw_majorversion, &hw_minorversion,
- &fw_majorversion, &fw_minorversion);
- xc_get_buildversion(priv, &fw_buildversion);
- dprintk(1, "*** HW: V%d.%d, FW: V %d.%d.%d\n",
- hw_majorversion, hw_minorversion,
- fw_majorversion, fw_minorversion, fw_buildversion);
-
- xc_get_hsync_freq(priv, &hsync_freq_hz);
- dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
-
- xc_get_frame_lines(priv, &frame_lines);
- dprintk(1, "*** Frame lines = %d\n", frame_lines);
-
- xc_get_quality(priv, &quality);
- dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality & 0x07);
-
- xc_get_analogsnr(priv, &snr);
- dprintk(1, "*** Unweighted analog SNR = %d dB\n", snr & 0x3f);
-
- xc_get_totalgain(priv, &totalgain);
- dprintk(1, "*** Total gain = %d.%d dB\n", totalgain / 256,
- (totalgain % 256) * 100 / 256);
-
- if (priv->pll_register_no) {
- xc5000_readreg(priv, priv->pll_register_no, ®val);
- dprintk(1, "*** PLL lock status = 0x%04x\n", regval);
- }
-}
-
-static int xc5000_set_params(struct dvb_frontend *fe)
-{
- int ret, b;
- struct xc5000_priv *priv = fe->tuner_priv;
- u32 bw = fe->dtv_property_cache.bandwidth_hz;
- u32 freq = fe->dtv_property_cache.frequency;
- u32 delsys = fe->dtv_property_cache.delivery_system;
-
- if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
- dprintk(1, "Unable to load firmware and init tuner\n");
- return -EINVAL;
- }
-
- dprintk(1, "%s() frequency=%d (Hz)\n", __func__, freq);
-
- switch (delsys) {
- case SYS_ATSC:
- dprintk(1, "%s() VSB modulation\n", __func__);
- priv->rf_mode = XC_RF_MODE_AIR;
- priv->freq_hz = freq - 1750000;
- priv->video_standard = DTV6;
- break;
- case SYS_DVBC_ANNEX_B:
- dprintk(1, "%s() QAM modulation\n", __func__);
- priv->rf_mode = XC_RF_MODE_CABLE;
- priv->freq_hz = freq - 1750000;
- priv->video_standard = DTV6;
- break;
- case SYS_ISDBT:
- /* All ISDB-T are currently for 6 MHz bw */
- if (!bw)
- bw = 6000000;
- /* fall to OFDM handling */
- case SYS_DMBTH:
- case SYS_DVBT:
- case SYS_DVBT2:
- dprintk(1, "%s() OFDM\n", __func__);
- switch (bw) {
- case 6000000:
- priv->video_standard = DTV6;
- priv->freq_hz = freq - 1750000;
- break;
- case 7000000:
- priv->video_standard = DTV7;
- priv->freq_hz = freq - 2250000;
- break;
- case 8000000:
- priv->video_standard = DTV8;
- priv->freq_hz = freq - 2750000;
- break;
- default:
- printk(KERN_ERR "xc5000 bandwidth not set!\n");
- return -EINVAL;
- }
- priv->rf_mode = XC_RF_MODE_AIR;
- case SYS_DVBC_ANNEX_A:
- case SYS_DVBC_ANNEX_C:
- dprintk(1, "%s() QAM modulation\n", __func__);
- priv->rf_mode = XC_RF_MODE_CABLE;
- if (bw <= 6000000) {
- priv->video_standard = DTV6;
- priv->freq_hz = freq - 1750000;
- b = 6;
- } else if (bw <= 7000000) {
- priv->video_standard = DTV7;
- priv->freq_hz = freq - 2250000;
- b = 7;
- } else {
- priv->video_standard = DTV7_8;
- priv->freq_hz = freq - 2750000;
- b = 8;
- }
- dprintk(1, "%s() Bandwidth %dMHz (%d)\n", __func__,
- b, bw);
- break;
- default:
- printk(KERN_ERR "xc5000: delivery system is not supported!\n");
- return -EINVAL;
- }
-
- dprintk(1, "%s() frequency=%d (compensated to %d)\n",
- __func__, freq, priv->freq_hz);
-
- ret = xc_SetSignalSource(priv, priv->rf_mode);
- if (ret != XC_RESULT_SUCCESS) {
- printk(KERN_ERR
- "xc5000: xc_SetSignalSource(%d) failed\n",
- priv->rf_mode);
- return -EREMOTEIO;
- }
-
- ret = xc_SetTVStandard(priv,
- XC5000_Standard[priv->video_standard].VideoMode,
- XC5000_Standard[priv->video_standard].AudioMode);
- if (ret != XC_RESULT_SUCCESS) {
- printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
- return -EREMOTEIO;
- }
-
- ret = xc_set_IF_frequency(priv, priv->if_khz);
- if (ret != XC_RESULT_SUCCESS) {
- printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
- priv->if_khz);
- return -EIO;
- }
-
- xc_write_reg(priv, XREG_OUTPUT_AMP, 0x8a);
-
- xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL);
-
- if (debug)
- xc_debug_dump(priv);
-
- priv->bandwidth = bw;
-
- return 0;
-}
-
-static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- int ret;
- u16 id;
-
- ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
- if (ret == XC_RESULT_SUCCESS) {
- if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
- ret = XC_RESULT_RESET_FAILURE;
- else
- ret = XC_RESULT_SUCCESS;
- }
-
- dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
- ret == XC_RESULT_SUCCESS ? "True" : "False", id);
- return ret;
-}
-
-static int xc5000_set_tv_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- u16 pll_lock_status;
- int ret;
-
- dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
- __func__, params->frequency);
-
- /* Fix me: it could be air. */
- priv->rf_mode = params->mode;
- if (params->mode > XC_RF_MODE_CABLE)
- priv->rf_mode = XC_RF_MODE_CABLE;
-
- /* params->frequency is in units of 62.5khz */
- priv->freq_hz = params->frequency * 62500;
-
- /* FIX ME: Some video standards may have several possible audio
- standards. We simply default to one of them here.
- */
- if (params->std & V4L2_STD_MN) {
- /* default to BTSC audio standard */
- priv->video_standard = MN_NTSC_PAL_BTSC;
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_PAL_BG) {
- /* default to NICAM audio standard */
- priv->video_standard = BG_PAL_NICAM;
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_PAL_I) {
- /* default to NICAM audio standard */
- priv->video_standard = I_PAL_NICAM;
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_PAL_DK) {
- /* default to NICAM audio standard */
- priv->video_standard = DK_PAL_NICAM;
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_SECAM_DK) {
- /* default to A2 DK1 audio standard */
- priv->video_standard = DK_SECAM_A2DK1;
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_SECAM_L) {
- priv->video_standard = L_SECAM_NICAM;
- goto tune_channel;
- }
-
- if (params->std & V4L2_STD_SECAM_LC) {
- priv->video_standard = LC_SECAM_NICAM;
- goto tune_channel;
- }
-
-tune_channel:
- ret = xc_SetSignalSource(priv, priv->rf_mode);
- if (ret != XC_RESULT_SUCCESS) {
- printk(KERN_ERR
- "xc5000: xc_SetSignalSource(%d) failed\n",
- priv->rf_mode);
- return -EREMOTEIO;
- }
-
- ret = xc_SetTVStandard(priv,
- XC5000_Standard[priv->video_standard].VideoMode,
- XC5000_Standard[priv->video_standard].AudioMode);
- if (ret != XC_RESULT_SUCCESS) {
- printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
- return -EREMOTEIO;
- }
-
- xc_write_reg(priv, XREG_OUTPUT_AMP, 0x09);
-
- xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
-
- if (debug)
- xc_debug_dump(priv);
-
- if (priv->pll_register_no != 0) {
- msleep(20);
- xc5000_readreg(priv, priv->pll_register_no, &pll_lock_status);
- if (pll_lock_status > 63) {
- /* PLL is unlocked, force reload of the firmware */
- dprintk(1, "xc5000: PLL not locked (0x%x). Reloading...\n",
- pll_lock_status);
- if (xc_load_fw_and_init_tuner(fe, 1) != XC_RESULT_SUCCESS) {
- printk(KERN_ERR "xc5000: Unable to reload fw\n");
- return -EREMOTEIO;
- }
- goto tune_channel;
- }
- }
-
- return 0;
-}
-
-static int xc5000_set_radio_freq(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- int ret = -EINVAL;
- u8 radio_input;
-
- dprintk(1, "%s() frequency=%d (in units of khz)\n",
- __func__, params->frequency);
-
- if (priv->radio_input == XC5000_RADIO_NOT_CONFIGURED) {
- dprintk(1, "%s() radio input not configured\n", __func__);
- return -EINVAL;
- }
-
- if (priv->radio_input == XC5000_RADIO_FM1)
- radio_input = FM_Radio_INPUT1;
- else if (priv->radio_input == XC5000_RADIO_FM2)
- radio_input = FM_Radio_INPUT2;
- else if (priv->radio_input == XC5000_RADIO_FM1_MONO)
- radio_input = FM_Radio_INPUT1_MONO;
- else {
- dprintk(1, "%s() unknown radio input %d\n", __func__,
- priv->radio_input);
- return -EINVAL;
- }
-
- priv->freq_hz = params->frequency * 125 / 2;
-
- priv->rf_mode = XC_RF_MODE_AIR;
-
- ret = xc_SetTVStandard(priv, XC5000_Standard[radio_input].VideoMode,
- XC5000_Standard[radio_input].AudioMode);
-
- if (ret != XC_RESULT_SUCCESS) {
- printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
- return -EREMOTEIO;
- }
-
- ret = xc_SetSignalSource(priv, priv->rf_mode);
- if (ret != XC_RESULT_SUCCESS) {
- printk(KERN_ERR
- "xc5000: xc_SetSignalSource(%d) failed\n",
- priv->rf_mode);
- return -EREMOTEIO;
- }
-
- if ((priv->radio_input == XC5000_RADIO_FM1) ||
- (priv->radio_input == XC5000_RADIO_FM2))
- xc_write_reg(priv, XREG_OUTPUT_AMP, 0x09);
- else if (priv->radio_input == XC5000_RADIO_FM1_MONO)
- xc_write_reg(priv, XREG_OUTPUT_AMP, 0x06);
-
- xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
-
- return 0;
-}
-
-static int xc5000_set_analog_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- int ret = -EINVAL;
-
- if (priv->i2c_props.adap == NULL)
- return -EINVAL;
-
- if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
- dprintk(1, "Unable to load firmware and init tuner\n");
- return -EINVAL;
- }
-
- switch (params->mode) {
- case V4L2_TUNER_RADIO:
- ret = xc5000_set_radio_freq(fe, params);
- break;
- case V4L2_TUNER_ANALOG_TV:
- case V4L2_TUNER_DIGITAL_TV:
- ret = xc5000_set_tv_freq(fe, params);
- break;
- }
-
- return ret;
-}
-
-
-static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- dprintk(1, "%s()\n", __func__);
- *freq = priv->freq_hz;
- return 0;
-}
-
-static int xc5000_get_if_frequency(struct dvb_frontend *fe, u32 *freq)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- dprintk(1, "%s()\n", __func__);
- *freq = priv->if_khz * 1000;
- return 0;
-}
-
-static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- dprintk(1, "%s()\n", __func__);
-
- *bw = priv->bandwidth;
- return 0;
-}
-
-static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- u16 lock_status = 0;
-
- xc_get_lock_status(priv, &lock_status);
-
- dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
-
- *status = lock_status;
-
- return 0;
-}
-
-static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- int ret = XC_RESULT_SUCCESS;
- u16 pll_lock_status;
- u16 fw_ck;
-
- if (force || xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
-
-fw_retry:
-
- ret = xc5000_fwupload(fe);
- if (ret != XC_RESULT_SUCCESS)
- return ret;
-
- msleep(20);
-
- if (priv->fw_checksum_supported) {
- if (xc5000_readreg(priv, XREG_FW_CHECKSUM, &fw_ck)
- != XC_RESULT_SUCCESS) {
- dprintk(1, "%s() FW checksum reading failed.\n",
- __func__);
- goto fw_retry;
- }
-
- if (fw_ck == 0) {
- dprintk(1, "%s() FW checksum failed = 0x%04x\n",
- __func__, fw_ck);
- goto fw_retry;
- }
- }
-
- /* Start the tuner self-calibration process */
- ret |= xc_initialize(priv);
-
- if (ret != XC_RESULT_SUCCESS)
- goto fw_retry;
-
- /* Wait for calibration to complete.
- * We could continue but XC5000 will clock stretch subsequent
- * I2C transactions until calibration is complete. This way we
- * don't have to rely on clock stretching working.
- */
- xc_wait(100);
-
- if (priv->init_status_supported) {
- if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck) != XC_RESULT_SUCCESS) {
- dprintk(1, "%s() FW failed reading init status.\n",
- __func__);
- goto fw_retry;
- }
-
- if (fw_ck == 0) {
- dprintk(1, "%s() FW init status failed = 0x%04x\n", __func__, fw_ck);
- goto fw_retry;
- }
- }
-
- if (priv->pll_register_no) {
- xc5000_readreg(priv, priv->pll_register_no,
- &pll_lock_status);
- if (pll_lock_status > 63) {
- /* PLL is unlocked, force reload of the firmware */
- printk(KERN_ERR "xc5000: PLL not running after fwload.\n");
- goto fw_retry;
- }
- }
-
- /* Default to "CABLE" mode */
- ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
- }
-
- return ret;
-}
-
-static int xc5000_sleep(struct dvb_frontend *fe)
-{
- int ret;
-
- dprintk(1, "%s()\n", __func__);
-
- /* Avoid firmware reload on slow devices */
- if (no_poweroff)
- return 0;
-
- /* According to Xceive technical support, the "powerdown" register
- was removed in newer versions of the firmware. The "supported"
- way to sleep the tuner is to pull the reset pin low for 10ms */
- ret = xc5000_TunerReset(fe);
- if (ret != XC_RESULT_SUCCESS) {
- printk(KERN_ERR
- "xc5000: %s() unable to shutdown tuner\n",
- __func__);
- return -EREMOTEIO;
- } else
- return XC_RESULT_SUCCESS;
-}
-
-static int xc5000_init(struct dvb_frontend *fe)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- dprintk(1, "%s()\n", __func__);
-
- if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
- printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
- return -EREMOTEIO;
- }
-
- if (debug)
- xc_debug_dump(priv);
-
- return 0;
-}
-
-static int xc5000_release(struct dvb_frontend *fe)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
-
- dprintk(1, "%s()\n", __func__);
-
- mutex_lock(&xc5000_list_mutex);
-
- if (priv)
- hybrid_tuner_release_state(priv);
-
- mutex_unlock(&xc5000_list_mutex);
-
- fe->tuner_priv = NULL;
-
- return 0;
-}
-
-static int xc5000_set_config(struct dvb_frontend *fe, void *priv_cfg)
-{
- struct xc5000_priv *priv = fe->tuner_priv;
- struct xc5000_config *p = priv_cfg;
-
- dprintk(1, "%s()\n", __func__);
-
- if (p->if_khz)
- priv->if_khz = p->if_khz;
-
- if (p->radio_input)
- priv->radio_input = p->radio_input;
-
- return 0;
-}
-
-
-static const struct dvb_tuner_ops xc5000_tuner_ops = {
- .info = {
- .name = "Xceive XC5000",
- .frequency_min = 1000000,
- .frequency_max = 1023000000,
- .frequency_step = 50000,
- },
-
- .release = xc5000_release,
- .init = xc5000_init,
- .sleep = xc5000_sleep,
-
- .set_config = xc5000_set_config,
- .set_params = xc5000_set_params,
- .set_analog_params = xc5000_set_analog_params,
- .get_frequency = xc5000_get_frequency,
- .get_if_frequency = xc5000_get_if_frequency,
- .get_bandwidth = xc5000_get_bandwidth,
- .get_status = xc5000_get_status
-};
-
-struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- const struct xc5000_config *cfg)
-{
- struct xc5000_priv *priv = NULL;
- int instance;
- u16 id = 0;
-
- dprintk(1, "%s(%d-%04x)\n", __func__,
- i2c ? i2c_adapter_id(i2c) : -1,
- cfg ? cfg->i2c_address : -1);
-
- mutex_lock(&xc5000_list_mutex);
-
- instance = hybrid_tuner_request_state(struct xc5000_priv, priv,
- hybrid_tuner_instance_list,
- i2c, cfg->i2c_address, "xc5000");
- switch (instance) {
- case 0:
- goto fail;
- break;
- case 1:
- /* new tuner instance */
- priv->bandwidth = 6000000;
- fe->tuner_priv = priv;
- break;
- default:
- /* existing tuner instance */
- fe->tuner_priv = priv;
- break;
- }
-
- if (priv->if_khz == 0) {
- /* If the IF hasn't been set yet, use the value provided by
- the caller (occurs in hybrid devices where the analog
- call to xc5000_attach occurs before the digital side) */
- priv->if_khz = cfg->if_khz;
- }
-
- if (priv->xtal_khz == 0)
- priv->xtal_khz = cfg->xtal_khz;
-
- if (priv->radio_input == 0)
- priv->radio_input = cfg->radio_input;
-
- /* don't override chip id if it's already been set
- unless explicitly specified */
- if ((priv->chip_id == 0) || (cfg->chip_id))
- /* use default chip id if none specified, set to 0 so
- it can be overridden if this is a hybrid driver */
- priv->chip_id = (cfg->chip_id) ? cfg->chip_id : 0;
-
- /* Check if firmware has been loaded. It is possible that another
- instance of the driver has loaded the firmware.
- */
- if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != XC_RESULT_SUCCESS)
- goto fail;
-
- switch (id) {
- case XC_PRODUCT_ID_FW_LOADED:
- printk(KERN_INFO
- "xc5000: Successfully identified at address 0x%02x\n",
- cfg->i2c_address);
- printk(KERN_INFO
- "xc5000: Firmware has been loaded previously\n");
- break;
- case XC_PRODUCT_ID_FW_NOT_LOADED:
- printk(KERN_INFO
- "xc5000: Successfully identified at address 0x%02x\n",
- cfg->i2c_address);
- printk(KERN_INFO
- "xc5000: Firmware has not been loaded previously\n");
- break;
- default:
- printk(KERN_ERR
- "xc5000: Device not found at addr 0x%02x (0x%x)\n",
- cfg->i2c_address, id);
- goto fail;
- }
-
- mutex_unlock(&xc5000_list_mutex);
-
- memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
- sizeof(struct dvb_tuner_ops));
-
- return fe;
-fail:
- mutex_unlock(&xc5000_list_mutex);
-
- xc5000_release(fe);
- return NULL;
-}
-EXPORT_SYMBOL(xc5000_attach);
-
-MODULE_AUTHOR("Steven Toth");
-MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE(XC5000A_FIRMWARE);
-MODULE_FIRMWARE(XC5000C_FIRMWARE);
diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h
deleted file mode 100644
index b1a5474..0000000
--- a/drivers/media/common/tuners/xc5000.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
- *
- * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __XC5000_H__
-#define __XC5000_H__
-
-#include <linux/firmware.h>
-
-struct dvb_frontend;
-struct i2c_adapter;
-
-#define XC5000A 1
-#define XC5000C 2
-
-struct xc5000_config {
- u8 i2c_address;
- u32 if_khz;
- u8 radio_input;
- u16 xtal_khz;
-
- int chip_id;
-};
-
-/* xc5000 callback command */
-#define XC5000_TUNER_RESET 0
-
-/* Possible Radio inputs */
-#define XC5000_RADIO_NOT_CONFIGURED 0
-#define XC5000_RADIO_FM1 1
-#define XC5000_RADIO_FM2 2
-#define XC5000_RADIO_FM1_MONO 3
-
-/* For each bridge framework, when it attaches either analog or digital,
- * it has to store a reference back to its _core equivalent structure,
- * so that it can service the hardware by steering gpio's etc.
- * Each bridge implementation is different so cast devptr accordingly.
- * The xc5000 driver cares not for this value, other than ensuring
- * it's passed back to a bridge during tuner_callback().
- */
-
-#if defined(CONFIG_MEDIA_TUNER_XC5000) || \
- (defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE))
-extern struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- const struct xc5000_config *cfg);
-#else
-static inline struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- const struct xc5000_config *cfg)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
-#endif