[SCSI] bnx2i: Add bnx2i iSCSI driver.
New iSCSI driver for Broadcom BNX2 devices. The driver interfaces with
the CNIC driver to access the hardware.
Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
new file mode 100644
index 0000000..ae4b2d5
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -0,0 +1,438 @@
+/* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
+static u32 adapter_count;
+static int bnx2i_reg_device;
+
+#define DRV_MODULE_NAME "bnx2i"
+#define DRV_MODULE_VERSION "2.0.1d"
+#define DRV_MODULE_RELDATE "Mar 25, 2009"
+
+static char version[] __devinitdata =
+ "Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
+ " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+
+MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709 iSCSI Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static DEFINE_RWLOCK(bnx2i_dev_lock);
+
+unsigned int event_coal_div = 1;
+module_param(event_coal_div, int, 0664);
+MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");
+
+unsigned int en_tcp_dack = 1;
+module_param(en_tcp_dack, int, 0664);
+MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK");
+
+unsigned int error_mask1 = 0x00;
+module_param(error_mask1, int, 0664);
+MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1");
+
+unsigned int error_mask2 = 0x00;
+module_param(error_mask2, int, 0664);
+MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2");
+
+unsigned int sq_size;
+module_param(sq_size, int, 0664);
+MODULE_PARM_DESC(sq_size, "Configure SQ size");
+
+unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT;
+module_param(rq_size, int, 0664);
+MODULE_PARM_DESC(rq_size, "Configure RQ size");
+
+u64 iscsi_error_mask = 0x00;
+
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba) ;
+
+
+/**
+ * bnx2i_identify_device - identifies NetXtreme II device type
+ * @hba: Adapter structure pointer
+ *
+ * This function identifies the NX2 device type and sets appropriate
+ * queue mailbox register access method, 5709 requires driver to
+ * access MBOX regs using *bin* mode
+ */
+void bnx2i_identify_device(struct bnx2i_hba *hba)
+{
+ hba->cnic_dev_type = 0;
+ if ((hba->pci_did == PCI_DEVICE_ID_NX2_5706) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5706S))
+ set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
+ else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5708) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5708S))
+ set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
+ else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5709) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) {
+ set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
+ hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
+ } else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 ||
+ hba->pci_did == PCI_DEVICE_ID_NX2_57711)
+ set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
+}
+
+
+/**
+ * get_adapter_list_head - returns head of adapter list
+ */
+struct bnx2i_hba *get_adapter_list_head(void)
+{
+ struct bnx2i_hba *hba = NULL;
+ struct bnx2i_hba *tmp_hba;
+
+ if (!adapter_count)
+ goto hba_not_found;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry(tmp_hba, &adapter_list, link) {
+ if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) {
+ hba = tmp_hba;
+ break;
+ }
+ }
+ read_unlock(&bnx2i_dev_lock);
+hba_not_found:
+ return hba;
+}
+
+
+/**
+ * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
+ * @cnic: pointer to cnic device instance
+ *
+ */
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link) {
+ if (hba->cnic == cnic) {
+ read_unlock(&bnx2i_dev_lock);
+ return hba;
+ }
+ }
+ read_unlock(&bnx2i_dev_lock);
+ return NULL;
+}
+
+
+/**
+ * bnx2i_start - cnic callback to initialize & start adapter instance
+ * @handle: transparent handle pointing to adapter structure
+ *
+ * This function maps adapter structure to pcidev structure and initiates
+ * firmware handshake to enable/initialize on chip iscsi components
+ * This bnx2i - cnic interface api callback is issued after following
+ * 2 conditions are met -
+ * a) underlying network interface is up (marked by event 'NETDEV_UP'
+ * from netdev
+ * b) bnx2i adapter instance is registered
+ */
+void bnx2i_start(void *handle)
+{
+#define BNX2I_INIT_POLL_TIME (1000 / HZ)
+ struct bnx2i_hba *hba = handle;
+ int i = HZ;
+
+ bnx2i_send_fw_iscsi_init_msg(hba);
+ while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--)
+ msleep(BNX2I_INIT_POLL_TIME);
+}
+
+
+/**
+ * bnx2i_stop - cnic callback to shutdown adapter instance
+ * @handle: transparent handle pointing to adapter structure
+ *
+ * driver checks if adapter is already in shutdown mode, if not start
+ * the shutdown process
+ */
+void bnx2i_stop(void *handle)
+{
+ struct bnx2i_hba *hba = handle;
+
+ /* check if cleanup happened in GOING_DOWN context */
+ clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+ if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
+ &hba->adapter_state))
+ iscsi_host_for_each_session(hba->shost,
+ bnx2i_drop_session);
+}
+
+/**
+ * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
+ * @hba: Adapter instance to register
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding the
+ * adapter structure lock
+ */
+void bnx2i_register_device(struct bnx2i_hba *hba)
+{
+ if (test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+ test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ return;
+ }
+
+ hba->cnic->register_device(hba->cnic, CNIC_ULP_ISCSI, hba);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device++;
+ spin_unlock(&hba->lock);
+
+ set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+
+/**
+ * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
+ *
+ * registers all bnx2i adapter instances with the cnic driver while holding
+ * the global resource lock
+ */
+void bnx2i_reg_dev_all(void)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link)
+ bnx2i_register_device(hba);
+ read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
+ * @hba: Adapter instance to unregister
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding
+ * the adapter structure lock
+ */
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba)
+{
+ if (hba->ofld_conns_active ||
+ !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) ||
+ test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state))
+ return;
+
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device--;
+ spin_unlock(&hba->lock);
+
+ /* ep_disconnect could come before NETDEV_DOWN, driver won't
+ * see NETDEV_DOWN as it already unregistered itself.
+ */
+ hba->adapter_state = 0;
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+/**
+ * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
+ *
+ * unregisters all bnx2i adapter instances with the cnic driver while holding
+ * the global resource lock
+ */
+void bnx2i_unreg_dev_all(void)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link)
+ bnx2i_unreg_one_device(hba);
+ read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_init_one - initialize an adapter instance and allocate memory resources
+ * @hba: bnx2i adapter instance
+ * @cnic: cnic device handle
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ * below. This routine is called from cnic_register_driver() context and
+ * work horse thread which does majority of device specific initialization
+ */
+static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic)
+{
+ int rc;
+
+ read_lock(&bnx2i_dev_lock);
+ if (bnx2i_reg_device &&
+ !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba);
+ if (rc) /* duplicate registration */
+ printk(KERN_ERR "bnx2i- dev reg failed\n");
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device++;
+ hba->age++;
+ spin_unlock(&hba->lock);
+
+ set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ }
+ read_unlock(&bnx2i_dev_lock);
+
+ write_lock(&bnx2i_dev_lock);
+ list_add_tail(&hba->link, &adapter_list);
+ adapter_count++;
+ write_unlock(&bnx2i_dev_lock);
+ return 0;
+}
+
+
+/**
+ * bnx2i_ulp_init - initialize an adapter instance
+ * @dev: cnic device handle
+ *
+ * Called from cnic_register_driver() context to initialize all enumerated
+ * cnic devices. This routine allocate adapter structure and other
+ * device specific resources.
+ */
+void bnx2i_ulp_init(struct cnic_dev *dev)
+{
+ struct bnx2i_hba *hba;
+
+ /* Allocate a HBA structure for this device */
+ hba = bnx2i_alloc_hba(dev);
+ if (!hba) {
+ printk(KERN_ERR "bnx2i init: hba initialization failed\n");
+ return;
+ }
+
+ /* Get PCI related information and update hba struct members */
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ if (bnx2i_init_one(hba, dev)) {
+ printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
+ bnx2i_free_hba(hba);
+ } else
+ hba->cnic = dev;
+}
+
+
+/**
+ * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
+ * @dev: cnic device handle
+ *
+ */
+void bnx2i_ulp_exit(struct cnic_dev *dev)
+{
+ struct bnx2i_hba *hba;
+
+ hba = bnx2i_find_hba_for_cnic(dev);
+ if (!hba) {
+ printk(KERN_INFO "bnx2i_ulp_exit: hba not "
+ "found, dev 0x%p\n", dev);
+ return;
+ }
+ write_lock(&bnx2i_dev_lock);
+ list_del_init(&hba->link);
+ adapter_count--;
+
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device--;
+ spin_unlock(&hba->lock);
+ }
+ write_unlock(&bnx2i_dev_lock);
+
+ bnx2i_free_hba(hba);
+}
+
+
+/**
+ * bnx2i_mod_init - module init entry point
+ *
+ * initialize any driver wide global data structures such as endpoint pool,
+ * tcp port manager/queue, sysfs. finally driver will register itself
+ * with the cnic module
+ */
+static int __init bnx2i_mod_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "%s", version);
+
+ if (!is_power_of_2(sq_size))
+ sq_size = roundup_pow_of_two(sq_size);
+
+ bnx2i_scsi_xport_template =
+ iscsi_register_transport(&bnx2i_iscsi_transport);
+ if (!bnx2i_scsi_xport_template) {
+ printk(KERN_ERR "Could not register bnx2i transport.\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb);
+ if (err) {
+ printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
+ goto unreg_xport;
+ }
+
+ return 0;
+
+unreg_xport:
+ iscsi_unregister_transport(&bnx2i_iscsi_transport);
+out:
+ return err;
+}
+
+
+/**
+ * bnx2i_mod_exit - module cleanup/exit entry point
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ * in this function. Driver will browse through the adapter list, cleans-up
+ * each instance, unregisters iscsi transport name and finally driver will
+ * unregister itself with the cnic module
+ */
+static void __exit bnx2i_mod_exit(void)
+{
+ struct bnx2i_hba *hba;
+
+ write_lock(&bnx2i_dev_lock);
+ while (!list_empty(&adapter_list)) {
+ hba = list_entry(adapter_list.next, struct bnx2i_hba, link);
+ list_del(&hba->link);
+ adapter_count--;
+
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ bnx2i_reg_device--;
+ }
+
+ write_unlock(&bnx2i_dev_lock);
+ bnx2i_free_hba(hba);
+ write_lock(&bnx2i_dev_lock);
+ }
+ write_unlock(&bnx2i_dev_lock);
+
+ iscsi_unregister_transport(&bnx2i_iscsi_transport);
+ cnic_unregister_driver(CNIC_ULP_ISCSI);
+}
+
+module_init(bnx2i_mod_init);
+module_exit(bnx2i_mod_exit);