|  | /* | 
|  | * ipmi_msghandler.c | 
|  | * | 
|  | * Incoming and outgoing message routing for an IPMI interface. | 
|  | * | 
|  | * Author: MontaVista Software, Inc. | 
|  | *         Corey Minyard <minyard@mvista.com> | 
|  | *         source@mvista.com | 
|  | * | 
|  | * Copyright 2002 MontaVista Software Inc. | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify it | 
|  | *  under the terms of the GNU General Public License as published by the | 
|  | *  Free Software Foundation; either version 2 of the License, or (at your | 
|  | *  option) any later version. | 
|  | * | 
|  | * | 
|  | *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | 
|  | *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | 
|  | *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | 
|  | *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | 
|  | *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | 
|  | *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | 
|  | *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | 
|  | *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | 
|  | *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License along | 
|  | *  with this program; if not, write to the Free Software Foundation, Inc., | 
|  | *  675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/errno.h> | 
|  | #include <asm/system.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/ipmi.h> | 
|  | #include <linux/ipmi_smi.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/rcupdate.h> | 
|  |  | 
|  | #define PFX "IPMI message handler: " | 
|  |  | 
|  | #define IPMI_DRIVER_VERSION "39.2" | 
|  |  | 
|  | static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); | 
|  | static int ipmi_init_msghandler(void); | 
|  |  | 
|  | static int initialized; | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | static struct proc_dir_entry *proc_ipmi_root; | 
|  | #endif /* CONFIG_PROC_FS */ | 
|  |  | 
|  | /* Remain in auto-maintenance mode for this amount of time (in ms). */ | 
|  | #define IPMI_MAINTENANCE_MODE_TIMEOUT 30000 | 
|  |  | 
|  | #define MAX_EVENTS_IN_QUEUE	25 | 
|  |  | 
|  | /* | 
|  | * Don't let a message sit in a queue forever, always time it with at lest | 
|  | * the max message timer.  This is in milliseconds. | 
|  | */ | 
|  | #define MAX_MSG_TIMEOUT		60000 | 
|  |  | 
|  | /* | 
|  | * The main "user" data structure. | 
|  | */ | 
|  | struct ipmi_user { | 
|  | struct list_head link; | 
|  |  | 
|  | /* Set to "0" when the user is destroyed. */ | 
|  | int valid; | 
|  |  | 
|  | struct kref refcount; | 
|  |  | 
|  | /* The upper layer that handles receive messages. */ | 
|  | struct ipmi_user_hndl *handler; | 
|  | void             *handler_data; | 
|  |  | 
|  | /* The interface this user is bound to. */ | 
|  | ipmi_smi_t intf; | 
|  |  | 
|  | /* Does this interface receive IPMI events? */ | 
|  | int gets_events; | 
|  | }; | 
|  |  | 
|  | struct cmd_rcvr { | 
|  | struct list_head link; | 
|  |  | 
|  | ipmi_user_t   user; | 
|  | unsigned char netfn; | 
|  | unsigned char cmd; | 
|  | unsigned int  chans; | 
|  |  | 
|  | /* | 
|  | * This is used to form a linked lised during mass deletion. | 
|  | * Since this is in an RCU list, we cannot use the link above | 
|  | * or change any data until the RCU period completes.  So we | 
|  | * use this next variable during mass deletion so we can have | 
|  | * a list and don't have to wait and restart the search on | 
|  | * every individual deletion of a command. | 
|  | */ | 
|  | struct cmd_rcvr *next; | 
|  | }; | 
|  |  | 
|  | struct seq_table { | 
|  | unsigned int         inuse : 1; | 
|  | unsigned int         broadcast : 1; | 
|  |  | 
|  | unsigned long        timeout; | 
|  | unsigned long        orig_timeout; | 
|  | unsigned int         retries_left; | 
|  |  | 
|  | /* | 
|  | * To verify on an incoming send message response that this is | 
|  | * the message that the response is for, we keep a sequence id | 
|  | * and increment it every time we send a message. | 
|  | */ | 
|  | long                 seqid; | 
|  |  | 
|  | /* | 
|  | * This is held so we can properly respond to the message on a | 
|  | * timeout, and it is used to hold the temporary data for | 
|  | * retransmission, too. | 
|  | */ | 
|  | struct ipmi_recv_msg *recv_msg; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Store the information in a msgid (long) to allow us to find a | 
|  | * sequence table entry from the msgid. | 
|  | */ | 
|  | #define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff)) | 
|  |  | 
|  | #define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \ | 
|  | do {								\ | 
|  | seq = ((msgid >> 26) & 0x3f);				\ | 
|  | seqid = (msgid & 0x3fffff);				\ | 
|  | } while (0) | 
|  |  | 
|  | #define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff) | 
|  |  | 
|  | struct ipmi_channel { | 
|  | unsigned char medium; | 
|  | unsigned char protocol; | 
|  |  | 
|  | /* | 
|  | * My slave address.  This is initialized to IPMI_BMC_SLAVE_ADDR, | 
|  | * but may be changed by the user. | 
|  | */ | 
|  | unsigned char address; | 
|  |  | 
|  | /* | 
|  | * My LUN.  This should generally stay the SMS LUN, but just in | 
|  | * case... | 
|  | */ | 
|  | unsigned char lun; | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | struct ipmi_proc_entry { | 
|  | char                   *name; | 
|  | struct ipmi_proc_entry *next; | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | struct bmc_device { | 
|  | struct platform_device *dev; | 
|  | struct ipmi_device_id  id; | 
|  | unsigned char          guid[16]; | 
|  | int                    guid_set; | 
|  |  | 
|  | struct kref	       refcount; | 
|  |  | 
|  | /* bmc device attributes */ | 
|  | struct device_attribute device_id_attr; | 
|  | struct device_attribute provides_dev_sdrs_attr; | 
|  | struct device_attribute revision_attr; | 
|  | struct device_attribute firmware_rev_attr; | 
|  | struct device_attribute version_attr; | 
|  | struct device_attribute add_dev_support_attr; | 
|  | struct device_attribute manufacturer_id_attr; | 
|  | struct device_attribute product_id_attr; | 
|  | struct device_attribute guid_attr; | 
|  | struct device_attribute aux_firmware_rev_attr; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Various statistics for IPMI, these index stats[] in the ipmi_smi | 
|  | * structure. | 
|  | */ | 
|  | enum ipmi_stat_indexes { | 
|  | /* Commands we got from the user that were invalid. */ | 
|  | IPMI_STAT_sent_invalid_commands = 0, | 
|  |  | 
|  | /* Commands we sent to the MC. */ | 
|  | IPMI_STAT_sent_local_commands, | 
|  |  | 
|  | /* Responses from the MC that were delivered to a user. */ | 
|  | IPMI_STAT_handled_local_responses, | 
|  |  | 
|  | /* Responses from the MC that were not delivered to a user. */ | 
|  | IPMI_STAT_unhandled_local_responses, | 
|  |  | 
|  | /* Commands we sent out to the IPMB bus. */ | 
|  | IPMI_STAT_sent_ipmb_commands, | 
|  |  | 
|  | /* Commands sent on the IPMB that had errors on the SEND CMD */ | 
|  | IPMI_STAT_sent_ipmb_command_errs, | 
|  |  | 
|  | /* Each retransmit increments this count. */ | 
|  | IPMI_STAT_retransmitted_ipmb_commands, | 
|  |  | 
|  | /* | 
|  | * When a message times out (runs out of retransmits) this is | 
|  | * incremented. | 
|  | */ | 
|  | IPMI_STAT_timed_out_ipmb_commands, | 
|  |  | 
|  | /* | 
|  | * This is like above, but for broadcasts.  Broadcasts are | 
|  | * *not* included in the above count (they are expected to | 
|  | * time out). | 
|  | */ | 
|  | IPMI_STAT_timed_out_ipmb_broadcasts, | 
|  |  | 
|  | /* Responses I have sent to the IPMB bus. */ | 
|  | IPMI_STAT_sent_ipmb_responses, | 
|  |  | 
|  | /* The response was delivered to the user. */ | 
|  | IPMI_STAT_handled_ipmb_responses, | 
|  |  | 
|  | /* The response had invalid data in it. */ | 
|  | IPMI_STAT_invalid_ipmb_responses, | 
|  |  | 
|  | /* The response didn't have anyone waiting for it. */ | 
|  | IPMI_STAT_unhandled_ipmb_responses, | 
|  |  | 
|  | /* Commands we sent out to the IPMB bus. */ | 
|  | IPMI_STAT_sent_lan_commands, | 
|  |  | 
|  | /* Commands sent on the IPMB that had errors on the SEND CMD */ | 
|  | IPMI_STAT_sent_lan_command_errs, | 
|  |  | 
|  | /* Each retransmit increments this count. */ | 
|  | IPMI_STAT_retransmitted_lan_commands, | 
|  |  | 
|  | /* | 
|  | * When a message times out (runs out of retransmits) this is | 
|  | * incremented. | 
|  | */ | 
|  | IPMI_STAT_timed_out_lan_commands, | 
|  |  | 
|  | /* Responses I have sent to the IPMB bus. */ | 
|  | IPMI_STAT_sent_lan_responses, | 
|  |  | 
|  | /* The response was delivered to the user. */ | 
|  | IPMI_STAT_handled_lan_responses, | 
|  |  | 
|  | /* The response had invalid data in it. */ | 
|  | IPMI_STAT_invalid_lan_responses, | 
|  |  | 
|  | /* The response didn't have anyone waiting for it. */ | 
|  | IPMI_STAT_unhandled_lan_responses, | 
|  |  | 
|  | /* The command was delivered to the user. */ | 
|  | IPMI_STAT_handled_commands, | 
|  |  | 
|  | /* The command had invalid data in it. */ | 
|  | IPMI_STAT_invalid_commands, | 
|  |  | 
|  | /* The command didn't have anyone waiting for it. */ | 
|  | IPMI_STAT_unhandled_commands, | 
|  |  | 
|  | /* Invalid data in an event. */ | 
|  | IPMI_STAT_invalid_events, | 
|  |  | 
|  | /* Events that were received with the proper format. */ | 
|  | IPMI_STAT_events, | 
|  |  | 
|  | /* Retransmissions on IPMB that failed. */ | 
|  | IPMI_STAT_dropped_rexmit_ipmb_commands, | 
|  |  | 
|  | /* Retransmissions on LAN that failed. */ | 
|  | IPMI_STAT_dropped_rexmit_lan_commands, | 
|  |  | 
|  | /* This *must* remain last, add new values above this. */ | 
|  | IPMI_NUM_STATS | 
|  | }; | 
|  |  | 
|  |  | 
|  | #define IPMI_IPMB_NUM_SEQ	64 | 
|  | #define IPMI_MAX_CHANNELS       16 | 
|  | struct ipmi_smi { | 
|  | /* What interface number are we? */ | 
|  | int intf_num; | 
|  |  | 
|  | struct kref refcount; | 
|  |  | 
|  | /* Used for a list of interfaces. */ | 
|  | struct list_head link; | 
|  |  | 
|  | /* | 
|  | * The list of upper layers that are using me.  seq_lock | 
|  | * protects this. | 
|  | */ | 
|  | struct list_head users; | 
|  |  | 
|  | /* Information to supply to users. */ | 
|  | unsigned char ipmi_version_major; | 
|  | unsigned char ipmi_version_minor; | 
|  |  | 
|  | /* Used for wake ups at startup. */ | 
|  | wait_queue_head_t waitq; | 
|  |  | 
|  | struct bmc_device *bmc; | 
|  | char *my_dev_name; | 
|  | char *sysfs_name; | 
|  |  | 
|  | /* | 
|  | * This is the lower-layer's sender routine.  Note that you | 
|  | * must either be holding the ipmi_interfaces_mutex or be in | 
|  | * an umpreemptible region to use this.  You must fetch the | 
|  | * value into a local variable and make sure it is not NULL. | 
|  | */ | 
|  | struct ipmi_smi_handlers *handlers; | 
|  | void                     *send_info; | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | /* A list of proc entries for this interface. */ | 
|  | struct mutex           proc_entry_lock; | 
|  | struct ipmi_proc_entry *proc_entries; | 
|  | #endif | 
|  |  | 
|  | /* Driver-model device for the system interface. */ | 
|  | struct device          *si_dev; | 
|  |  | 
|  | /* | 
|  | * A table of sequence numbers for this interface.  We use the | 
|  | * sequence numbers for IPMB messages that go out of the | 
|  | * interface to match them up with their responses.  A routine | 
|  | * is called periodically to time the items in this list. | 
|  | */ | 
|  | spinlock_t       seq_lock; | 
|  | struct seq_table seq_table[IPMI_IPMB_NUM_SEQ]; | 
|  | int curr_seq; | 
|  |  | 
|  | /* | 
|  | * Messages that were delayed for some reason (out of memory, | 
|  | * for instance), will go in here to be processed later in a | 
|  | * periodic timer interrupt. | 
|  | */ | 
|  | spinlock_t       waiting_msgs_lock; | 
|  | struct list_head waiting_msgs; | 
|  |  | 
|  | /* | 
|  | * The list of command receivers that are registered for commands | 
|  | * on this interface. | 
|  | */ | 
|  | struct mutex     cmd_rcvrs_mutex; | 
|  | struct list_head cmd_rcvrs; | 
|  |  | 
|  | /* | 
|  | * Events that were queues because no one was there to receive | 
|  | * them. | 
|  | */ | 
|  | spinlock_t       events_lock; /* For dealing with event stuff. */ | 
|  | struct list_head waiting_events; | 
|  | unsigned int     waiting_events_count; /* How many events in queue? */ | 
|  | char             delivering_events; | 
|  | char             event_msg_printed; | 
|  |  | 
|  | /* | 
|  | * The event receiver for my BMC, only really used at panic | 
|  | * shutdown as a place to store this. | 
|  | */ | 
|  | unsigned char event_receiver; | 
|  | unsigned char event_receiver_lun; | 
|  | unsigned char local_sel_device; | 
|  | unsigned char local_event_generator; | 
|  |  | 
|  | /* For handling of maintenance mode. */ | 
|  | int maintenance_mode; | 
|  | int maintenance_mode_enable; | 
|  | int auto_maintenance_timeout; | 
|  | spinlock_t maintenance_mode_lock; /* Used in a timer... */ | 
|  |  | 
|  | /* | 
|  | * A cheap hack, if this is non-null and a message to an | 
|  | * interface comes in with a NULL user, call this routine with | 
|  | * it.  Note that the message will still be freed by the | 
|  | * caller.  This only works on the system interface. | 
|  | */ | 
|  | void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_recv_msg *msg); | 
|  |  | 
|  | /* | 
|  | * When we are scanning the channels for an SMI, this will | 
|  | * tell which channel we are scanning. | 
|  | */ | 
|  | int curr_channel; | 
|  |  | 
|  | /* Channel information */ | 
|  | struct ipmi_channel channels[IPMI_MAX_CHANNELS]; | 
|  |  | 
|  | /* Proc FS stuff. */ | 
|  | struct proc_dir_entry *proc_dir; | 
|  | char                  proc_dir_name[10]; | 
|  |  | 
|  | atomic_t stats[IPMI_NUM_STATS]; | 
|  |  | 
|  | /* | 
|  | * run_to_completion duplicate of smb_info, smi_info | 
|  | * and ipmi_serial_info structures. Used to decrease numbers of | 
|  | * parameters passed by "low" level IPMI code. | 
|  | */ | 
|  | int run_to_completion; | 
|  | }; | 
|  | #define to_si_intf_from_dev(device) container_of(device, struct ipmi_smi, dev) | 
|  |  | 
|  | /** | 
|  | * The driver model view of the IPMI messaging driver. | 
|  | */ | 
|  | static struct platform_driver ipmidriver = { | 
|  | .driver = { | 
|  | .name = "ipmi", | 
|  | .bus = &platform_bus_type | 
|  | } | 
|  | }; | 
|  | static DEFINE_MUTEX(ipmidriver_mutex); | 
|  |  | 
|  | static LIST_HEAD(ipmi_interfaces); | 
|  | static DEFINE_MUTEX(ipmi_interfaces_mutex); | 
|  |  | 
|  | /* | 
|  | * List of watchers that want to know when smi's are added and deleted. | 
|  | */ | 
|  | static LIST_HEAD(smi_watchers); | 
|  | static DEFINE_MUTEX(smi_watchers_mutex); | 
|  |  | 
|  |  | 
|  | #define ipmi_inc_stat(intf, stat) \ | 
|  | atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat]) | 
|  | #define ipmi_get_stat(intf, stat) \ | 
|  | ((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat])) | 
|  |  | 
|  | static int is_lan_addr(struct ipmi_addr *addr) | 
|  | { | 
|  | return addr->addr_type == IPMI_LAN_ADDR_TYPE; | 
|  | } | 
|  |  | 
|  | static int is_ipmb_addr(struct ipmi_addr *addr) | 
|  | { | 
|  | return addr->addr_type == IPMI_IPMB_ADDR_TYPE; | 
|  | } | 
|  |  | 
|  | static int is_ipmb_bcast_addr(struct ipmi_addr *addr) | 
|  | { | 
|  | return addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE; | 
|  | } | 
|  |  | 
|  | static void free_recv_msg_list(struct list_head *q) | 
|  | { | 
|  | struct ipmi_recv_msg *msg, *msg2; | 
|  |  | 
|  | list_for_each_entry_safe(msg, msg2, q, link) { | 
|  | list_del(&msg->link); | 
|  | ipmi_free_recv_msg(msg); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void free_smi_msg_list(struct list_head *q) | 
|  | { | 
|  | struct ipmi_smi_msg *msg, *msg2; | 
|  |  | 
|  | list_for_each_entry_safe(msg, msg2, q, link) { | 
|  | list_del(&msg->link); | 
|  | ipmi_free_smi_msg(msg); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void clean_up_interface_data(ipmi_smi_t intf) | 
|  | { | 
|  | int              i; | 
|  | struct cmd_rcvr  *rcvr, *rcvr2; | 
|  | struct list_head list; | 
|  |  | 
|  | free_smi_msg_list(&intf->waiting_msgs); | 
|  | free_recv_msg_list(&intf->waiting_events); | 
|  |  | 
|  | /* | 
|  | * Wholesale remove all the entries from the list in the | 
|  | * interface and wait for RCU to know that none are in use. | 
|  | */ | 
|  | mutex_lock(&intf->cmd_rcvrs_mutex); | 
|  | INIT_LIST_HEAD(&list); | 
|  | list_splice_init_rcu(&intf->cmd_rcvrs, &list, synchronize_rcu); | 
|  | mutex_unlock(&intf->cmd_rcvrs_mutex); | 
|  |  | 
|  | list_for_each_entry_safe(rcvr, rcvr2, &list, link) | 
|  | kfree(rcvr); | 
|  |  | 
|  | for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { | 
|  | if ((intf->seq_table[i].inuse) | 
|  | && (intf->seq_table[i].recv_msg)) | 
|  | ipmi_free_recv_msg(intf->seq_table[i].recv_msg); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void intf_free(struct kref *ref) | 
|  | { | 
|  | ipmi_smi_t intf = container_of(ref, struct ipmi_smi, refcount); | 
|  |  | 
|  | clean_up_interface_data(intf); | 
|  | kfree(intf); | 
|  | } | 
|  |  | 
|  | struct watcher_entry { | 
|  | int              intf_num; | 
|  | ipmi_smi_t       intf; | 
|  | struct list_head link; | 
|  | }; | 
|  |  | 
|  | int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher) | 
|  | { | 
|  | ipmi_smi_t intf; | 
|  | LIST_HEAD(to_deliver); | 
|  | struct watcher_entry *e, *e2; | 
|  |  | 
|  | mutex_lock(&smi_watchers_mutex); | 
|  |  | 
|  | mutex_lock(&ipmi_interfaces_mutex); | 
|  |  | 
|  | /* Build a list of things to deliver. */ | 
|  | list_for_each_entry(intf, &ipmi_interfaces, link) { | 
|  | if (intf->intf_num == -1) | 
|  | continue; | 
|  | e = kmalloc(sizeof(*e), GFP_KERNEL); | 
|  | if (!e) | 
|  | goto out_err; | 
|  | kref_get(&intf->refcount); | 
|  | e->intf = intf; | 
|  | e->intf_num = intf->intf_num; | 
|  | list_add_tail(&e->link, &to_deliver); | 
|  | } | 
|  |  | 
|  | /* We will succeed, so add it to the list. */ | 
|  | list_add(&watcher->link, &smi_watchers); | 
|  |  | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  |  | 
|  | list_for_each_entry_safe(e, e2, &to_deliver, link) { | 
|  | list_del(&e->link); | 
|  | watcher->new_smi(e->intf_num, e->intf->si_dev); | 
|  | kref_put(&e->intf->refcount, intf_free); | 
|  | kfree(e); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&smi_watchers_mutex); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_err: | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  | mutex_unlock(&smi_watchers_mutex); | 
|  | list_for_each_entry_safe(e, e2, &to_deliver, link) { | 
|  | list_del(&e->link); | 
|  | kref_put(&e->intf->refcount, intf_free); | 
|  | kfree(e); | 
|  | } | 
|  | return -ENOMEM; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_smi_watcher_register); | 
|  |  | 
|  | int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher) | 
|  | { | 
|  | mutex_lock(&smi_watchers_mutex); | 
|  | list_del(&(watcher->link)); | 
|  | mutex_unlock(&smi_watchers_mutex); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_smi_watcher_unregister); | 
|  |  | 
|  | /* | 
|  | * Must be called with smi_watchers_mutex held. | 
|  | */ | 
|  | static void | 
|  | call_smi_watchers(int i, struct device *dev) | 
|  | { | 
|  | struct ipmi_smi_watcher *w; | 
|  |  | 
|  | list_for_each_entry(w, &smi_watchers, link) { | 
|  | if (try_module_get(w->owner)) { | 
|  | w->new_smi(i, dev); | 
|  | module_put(w->owner); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) | 
|  | { | 
|  | if (addr1->addr_type != addr2->addr_type) | 
|  | return 0; | 
|  |  | 
|  | if (addr1->channel != addr2->channel) | 
|  | return 0; | 
|  |  | 
|  | if (addr1->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { | 
|  | struct ipmi_system_interface_addr *smi_addr1 | 
|  | = (struct ipmi_system_interface_addr *) addr1; | 
|  | struct ipmi_system_interface_addr *smi_addr2 | 
|  | = (struct ipmi_system_interface_addr *) addr2; | 
|  | return (smi_addr1->lun == smi_addr2->lun); | 
|  | } | 
|  |  | 
|  | if (is_ipmb_addr(addr1) || is_ipmb_bcast_addr(addr1)) { | 
|  | struct ipmi_ipmb_addr *ipmb_addr1 | 
|  | = (struct ipmi_ipmb_addr *) addr1; | 
|  | struct ipmi_ipmb_addr *ipmb_addr2 | 
|  | = (struct ipmi_ipmb_addr *) addr2; | 
|  |  | 
|  | return ((ipmb_addr1->slave_addr == ipmb_addr2->slave_addr) | 
|  | && (ipmb_addr1->lun == ipmb_addr2->lun)); | 
|  | } | 
|  |  | 
|  | if (is_lan_addr(addr1)) { | 
|  | struct ipmi_lan_addr *lan_addr1 | 
|  | = (struct ipmi_lan_addr *) addr1; | 
|  | struct ipmi_lan_addr *lan_addr2 | 
|  | = (struct ipmi_lan_addr *) addr2; | 
|  |  | 
|  | return ((lan_addr1->remote_SWID == lan_addr2->remote_SWID) | 
|  | && (lan_addr1->local_SWID == lan_addr2->local_SWID) | 
|  | && (lan_addr1->session_handle | 
|  | == lan_addr2->session_handle) | 
|  | && (lan_addr1->lun == lan_addr2->lun)); | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int ipmi_validate_addr(struct ipmi_addr *addr, int len) | 
|  | { | 
|  | if (len < sizeof(struct ipmi_system_interface_addr)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { | 
|  | if (addr->channel != IPMI_BMC_CHANNEL) | 
|  | return -EINVAL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if ((addr->channel == IPMI_BMC_CHANNEL) | 
|  | || (addr->channel >= IPMI_MAX_CHANNELS) | 
|  | || (addr->channel < 0)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) { | 
|  | if (len < sizeof(struct ipmi_ipmb_addr)) | 
|  | return -EINVAL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (is_lan_addr(addr)) { | 
|  | if (len < sizeof(struct ipmi_lan_addr)) | 
|  | return -EINVAL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_validate_addr); | 
|  |  | 
|  | unsigned int ipmi_addr_length(int addr_type) | 
|  | { | 
|  | if (addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
|  | return sizeof(struct ipmi_system_interface_addr); | 
|  |  | 
|  | if ((addr_type == IPMI_IPMB_ADDR_TYPE) | 
|  | || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) | 
|  | return sizeof(struct ipmi_ipmb_addr); | 
|  |  | 
|  | if (addr_type == IPMI_LAN_ADDR_TYPE) | 
|  | return sizeof(struct ipmi_lan_addr); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_addr_length); | 
|  |  | 
|  | static void deliver_response(struct ipmi_recv_msg *msg) | 
|  | { | 
|  | if (!msg->user) { | 
|  | ipmi_smi_t    intf = msg->user_msg_data; | 
|  |  | 
|  | /* Special handling for NULL users. */ | 
|  | if (intf->null_user_handler) { | 
|  | intf->null_user_handler(intf, msg); | 
|  | ipmi_inc_stat(intf, handled_local_responses); | 
|  | } else { | 
|  | /* No handler, so give up. */ | 
|  | ipmi_inc_stat(intf, unhandled_local_responses); | 
|  | } | 
|  | ipmi_free_recv_msg(msg); | 
|  | } else { | 
|  | ipmi_user_t user = msg->user; | 
|  | user->handler->ipmi_recv_hndl(msg, user->handler_data); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | deliver_err_response(struct ipmi_recv_msg *msg, int err) | 
|  | { | 
|  | msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
|  | msg->msg_data[0] = err; | 
|  | msg->msg.netfn |= 1; /* Convert to a response. */ | 
|  | msg->msg.data_len = 1; | 
|  | msg->msg.data = msg->msg_data; | 
|  | deliver_response(msg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Find the next sequence number not being used and add the given | 
|  | * message with the given timeout to the sequence table.  This must be | 
|  | * called with the interface's seq_lock held. | 
|  | */ | 
|  | static int intf_next_seq(ipmi_smi_t           intf, | 
|  | struct ipmi_recv_msg *recv_msg, | 
|  | unsigned long        timeout, | 
|  | int                  retries, | 
|  | int                  broadcast, | 
|  | unsigned char        *seq, | 
|  | long                 *seqid) | 
|  | { | 
|  | int          rv = 0; | 
|  | unsigned int i; | 
|  |  | 
|  | for (i = intf->curr_seq; (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq; | 
|  | i = (i+1)%IPMI_IPMB_NUM_SEQ) { | 
|  | if (!intf->seq_table[i].inuse) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!intf->seq_table[i].inuse) { | 
|  | intf->seq_table[i].recv_msg = recv_msg; | 
|  |  | 
|  | /* | 
|  | * Start with the maximum timeout, when the send response | 
|  | * comes in we will start the real timer. | 
|  | */ | 
|  | intf->seq_table[i].timeout = MAX_MSG_TIMEOUT; | 
|  | intf->seq_table[i].orig_timeout = timeout; | 
|  | intf->seq_table[i].retries_left = retries; | 
|  | intf->seq_table[i].broadcast = broadcast; | 
|  | intf->seq_table[i].inuse = 1; | 
|  | intf->seq_table[i].seqid = NEXT_SEQID(intf->seq_table[i].seqid); | 
|  | *seq = i; | 
|  | *seqid = intf->seq_table[i].seqid; | 
|  | intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ; | 
|  | } else { | 
|  | rv = -EAGAIN; | 
|  | } | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the receive message for the given sequence number and | 
|  | * release the sequence number so it can be reused.  Some other data | 
|  | * is passed in to be sure the message matches up correctly (to help | 
|  | * guard against message coming in after their timeout and the | 
|  | * sequence number being reused). | 
|  | */ | 
|  | static int intf_find_seq(ipmi_smi_t           intf, | 
|  | unsigned char        seq, | 
|  | short                channel, | 
|  | unsigned char        cmd, | 
|  | unsigned char        netfn, | 
|  | struct ipmi_addr     *addr, | 
|  | struct ipmi_recv_msg **recv_msg) | 
|  | { | 
|  | int           rv = -ENODEV; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (seq >= IPMI_IPMB_NUM_SEQ) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&(intf->seq_lock), flags); | 
|  | if (intf->seq_table[seq].inuse) { | 
|  | struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg; | 
|  |  | 
|  | if ((msg->addr.channel == channel) && (msg->msg.cmd == cmd) | 
|  | && (msg->msg.netfn == netfn) | 
|  | && (ipmi_addr_equal(addr, &(msg->addr)))) { | 
|  | *recv_msg = msg; | 
|  | intf->seq_table[seq].inuse = 0; | 
|  | rv = 0; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Start the timer for a specific sequence table entry. */ | 
|  | static int intf_start_seq_timer(ipmi_smi_t intf, | 
|  | long       msgid) | 
|  | { | 
|  | int           rv = -ENODEV; | 
|  | unsigned long flags; | 
|  | unsigned char seq; | 
|  | unsigned long seqid; | 
|  |  | 
|  |  | 
|  | GET_SEQ_FROM_MSGID(msgid, seq, seqid); | 
|  |  | 
|  | spin_lock_irqsave(&(intf->seq_lock), flags); | 
|  | /* | 
|  | * We do this verification because the user can be deleted | 
|  | * while a message is outstanding. | 
|  | */ | 
|  | if ((intf->seq_table[seq].inuse) | 
|  | && (intf->seq_table[seq].seqid == seqid)) { | 
|  | struct seq_table *ent = &(intf->seq_table[seq]); | 
|  | ent->timeout = ent->orig_timeout; | 
|  | rv = 0; | 
|  | } | 
|  | spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | /* Got an error for the send message for a specific sequence number. */ | 
|  | static int intf_err_seq(ipmi_smi_t   intf, | 
|  | long         msgid, | 
|  | unsigned int err) | 
|  | { | 
|  | int                  rv = -ENODEV; | 
|  | unsigned long        flags; | 
|  | unsigned char        seq; | 
|  | unsigned long        seqid; | 
|  | struct ipmi_recv_msg *msg = NULL; | 
|  |  | 
|  |  | 
|  | GET_SEQ_FROM_MSGID(msgid, seq, seqid); | 
|  |  | 
|  | spin_lock_irqsave(&(intf->seq_lock), flags); | 
|  | /* | 
|  | * We do this verification because the user can be deleted | 
|  | * while a message is outstanding. | 
|  | */ | 
|  | if ((intf->seq_table[seq].inuse) | 
|  | && (intf->seq_table[seq].seqid == seqid)) { | 
|  | struct seq_table *ent = &(intf->seq_table[seq]); | 
|  |  | 
|  | ent->inuse = 0; | 
|  | msg = ent->recv_msg; | 
|  | rv = 0; | 
|  | } | 
|  | spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
|  |  | 
|  | if (msg) | 
|  | deliver_err_response(msg, err); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  |  | 
|  | int ipmi_create_user(unsigned int          if_num, | 
|  | struct ipmi_user_hndl *handler, | 
|  | void                  *handler_data, | 
|  | ipmi_user_t           *user) | 
|  | { | 
|  | unsigned long flags; | 
|  | ipmi_user_t   new_user; | 
|  | int           rv = 0; | 
|  | ipmi_smi_t    intf; | 
|  |  | 
|  | /* | 
|  | * There is no module usecount here, because it's not | 
|  | * required.  Since this can only be used by and called from | 
|  | * other modules, they will implicitly use this module, and | 
|  | * thus this can't be removed unless the other modules are | 
|  | * removed. | 
|  | */ | 
|  |  | 
|  | if (handler == NULL) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Make sure the driver is actually initialized, this handles | 
|  | * problems with initialization order. | 
|  | */ | 
|  | if (!initialized) { | 
|  | rv = ipmi_init_msghandler(); | 
|  | if (rv) | 
|  | return rv; | 
|  |  | 
|  | /* | 
|  | * The init code doesn't return an error if it was turned | 
|  | * off, but it won't initialize.  Check that. | 
|  | */ | 
|  | if (!initialized) | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | new_user = kmalloc(sizeof(*new_user), GFP_KERNEL); | 
|  | if (!new_user) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_lock(&ipmi_interfaces_mutex); | 
|  | list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { | 
|  | if (intf->intf_num == if_num) | 
|  | goto found; | 
|  | } | 
|  | /* Not found, return an error */ | 
|  | rv = -EINVAL; | 
|  | goto out_kfree; | 
|  |  | 
|  | found: | 
|  | /* Note that each existing user holds a refcount to the interface. */ | 
|  | kref_get(&intf->refcount); | 
|  |  | 
|  | kref_init(&new_user->refcount); | 
|  | new_user->handler = handler; | 
|  | new_user->handler_data = handler_data; | 
|  | new_user->intf = intf; | 
|  | new_user->gets_events = 0; | 
|  |  | 
|  | if (!try_module_get(intf->handlers->owner)) { | 
|  | rv = -ENODEV; | 
|  | goto out_kref; | 
|  | } | 
|  |  | 
|  | if (intf->handlers->inc_usecount) { | 
|  | rv = intf->handlers->inc_usecount(intf->send_info); | 
|  | if (rv) { | 
|  | module_put(intf->handlers->owner); | 
|  | goto out_kref; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Hold the lock so intf->handlers is guaranteed to be good | 
|  | * until now | 
|  | */ | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  |  | 
|  | new_user->valid = 1; | 
|  | spin_lock_irqsave(&intf->seq_lock, flags); | 
|  | list_add_rcu(&new_user->link, &intf->users); | 
|  | spin_unlock_irqrestore(&intf->seq_lock, flags); | 
|  | *user = new_user; | 
|  | return 0; | 
|  |  | 
|  | out_kref: | 
|  | kref_put(&intf->refcount, intf_free); | 
|  | out_kfree: | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  | kfree(new_user); | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_create_user); | 
|  |  | 
|  | int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data) | 
|  | { | 
|  | int           rv = 0; | 
|  | ipmi_smi_t    intf; | 
|  | struct ipmi_smi_handlers *handlers; | 
|  |  | 
|  | mutex_lock(&ipmi_interfaces_mutex); | 
|  | list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { | 
|  | if (intf->intf_num == if_num) | 
|  | goto found; | 
|  | } | 
|  | /* Not found, return an error */ | 
|  | rv = -EINVAL; | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  | return rv; | 
|  |  | 
|  | found: | 
|  | handlers = intf->handlers; | 
|  | rv = -ENOSYS; | 
|  | if (handlers->get_smi_info) | 
|  | rv = handlers->get_smi_info(intf->send_info, data); | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_get_smi_info); | 
|  |  | 
|  | static void free_user(struct kref *ref) | 
|  | { | 
|  | ipmi_user_t user = container_of(ref, struct ipmi_user, refcount); | 
|  | kfree(user); | 
|  | } | 
|  |  | 
|  | int ipmi_destroy_user(ipmi_user_t user) | 
|  | { | 
|  | ipmi_smi_t       intf = user->intf; | 
|  | int              i; | 
|  | unsigned long    flags; | 
|  | struct cmd_rcvr  *rcvr; | 
|  | struct cmd_rcvr  *rcvrs = NULL; | 
|  |  | 
|  | user->valid = 0; | 
|  |  | 
|  | /* Remove the user from the interface's sequence table. */ | 
|  | spin_lock_irqsave(&intf->seq_lock, flags); | 
|  | list_del_rcu(&user->link); | 
|  |  | 
|  | for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { | 
|  | if (intf->seq_table[i].inuse | 
|  | && (intf->seq_table[i].recv_msg->user == user)) { | 
|  | intf->seq_table[i].inuse = 0; | 
|  | ipmi_free_recv_msg(intf->seq_table[i].recv_msg); | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&intf->seq_lock, flags); | 
|  |  | 
|  | /* | 
|  | * Remove the user from the command receiver's table.  First | 
|  | * we build a list of everything (not using the standard link, | 
|  | * since other things may be using it till we do | 
|  | * synchronize_rcu()) then free everything in that list. | 
|  | */ | 
|  | mutex_lock(&intf->cmd_rcvrs_mutex); | 
|  | list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { | 
|  | if (rcvr->user == user) { | 
|  | list_del_rcu(&rcvr->link); | 
|  | rcvr->next = rcvrs; | 
|  | rcvrs = rcvr; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&intf->cmd_rcvrs_mutex); | 
|  | synchronize_rcu(); | 
|  | while (rcvrs) { | 
|  | rcvr = rcvrs; | 
|  | rcvrs = rcvr->next; | 
|  | kfree(rcvr); | 
|  | } | 
|  |  | 
|  | mutex_lock(&ipmi_interfaces_mutex); | 
|  | if (intf->handlers) { | 
|  | module_put(intf->handlers->owner); | 
|  | if (intf->handlers->dec_usecount) | 
|  | intf->handlers->dec_usecount(intf->send_info); | 
|  | } | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  |  | 
|  | kref_put(&intf->refcount, intf_free); | 
|  |  | 
|  | kref_put(&user->refcount, free_user); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_destroy_user); | 
|  |  | 
|  | void ipmi_get_version(ipmi_user_t   user, | 
|  | unsigned char *major, | 
|  | unsigned char *minor) | 
|  | { | 
|  | *major = user->intf->ipmi_version_major; | 
|  | *minor = user->intf->ipmi_version_minor; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_get_version); | 
|  |  | 
|  | int ipmi_set_my_address(ipmi_user_t   user, | 
|  | unsigned int  channel, | 
|  | unsigned char address) | 
|  | { | 
|  | if (channel >= IPMI_MAX_CHANNELS) | 
|  | return -EINVAL; | 
|  | user->intf->channels[channel].address = address; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_set_my_address); | 
|  |  | 
|  | int ipmi_get_my_address(ipmi_user_t   user, | 
|  | unsigned int  channel, | 
|  | unsigned char *address) | 
|  | { | 
|  | if (channel >= IPMI_MAX_CHANNELS) | 
|  | return -EINVAL; | 
|  | *address = user->intf->channels[channel].address; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_get_my_address); | 
|  |  | 
|  | int ipmi_set_my_LUN(ipmi_user_t   user, | 
|  | unsigned int  channel, | 
|  | unsigned char LUN) | 
|  | { | 
|  | if (channel >= IPMI_MAX_CHANNELS) | 
|  | return -EINVAL; | 
|  | user->intf->channels[channel].lun = LUN & 0x3; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_set_my_LUN); | 
|  |  | 
|  | int ipmi_get_my_LUN(ipmi_user_t   user, | 
|  | unsigned int  channel, | 
|  | unsigned char *address) | 
|  | { | 
|  | if (channel >= IPMI_MAX_CHANNELS) | 
|  | return -EINVAL; | 
|  | *address = user->intf->channels[channel].lun; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_get_my_LUN); | 
|  |  | 
|  | int ipmi_get_maintenance_mode(ipmi_user_t user) | 
|  | { | 
|  | int           mode; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&user->intf->maintenance_mode_lock, flags); | 
|  | mode = user->intf->maintenance_mode; | 
|  | spin_unlock_irqrestore(&user->intf->maintenance_mode_lock, flags); | 
|  |  | 
|  | return mode; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_get_maintenance_mode); | 
|  |  | 
|  | static void maintenance_mode_update(ipmi_smi_t intf) | 
|  | { | 
|  | if (intf->handlers->set_maintenance_mode) | 
|  | intf->handlers->set_maintenance_mode( | 
|  | intf->send_info, intf->maintenance_mode_enable); | 
|  | } | 
|  |  | 
|  | int ipmi_set_maintenance_mode(ipmi_user_t user, int mode) | 
|  | { | 
|  | int           rv = 0; | 
|  | unsigned long flags; | 
|  | ipmi_smi_t    intf = user->intf; | 
|  |  | 
|  | spin_lock_irqsave(&intf->maintenance_mode_lock, flags); | 
|  | if (intf->maintenance_mode != mode) { | 
|  | switch (mode) { | 
|  | case IPMI_MAINTENANCE_MODE_AUTO: | 
|  | intf->maintenance_mode = mode; | 
|  | intf->maintenance_mode_enable | 
|  | = (intf->auto_maintenance_timeout > 0); | 
|  | break; | 
|  |  | 
|  | case IPMI_MAINTENANCE_MODE_OFF: | 
|  | intf->maintenance_mode = mode; | 
|  | intf->maintenance_mode_enable = 0; | 
|  | break; | 
|  |  | 
|  | case IPMI_MAINTENANCE_MODE_ON: | 
|  | intf->maintenance_mode = mode; | 
|  | intf->maintenance_mode_enable = 1; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | rv = -EINVAL; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | maintenance_mode_update(intf); | 
|  | } | 
|  | out_unlock: | 
|  | spin_unlock_irqrestore(&intf->maintenance_mode_lock, flags); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_set_maintenance_mode); | 
|  |  | 
|  | int ipmi_set_gets_events(ipmi_user_t user, int val) | 
|  | { | 
|  | unsigned long        flags; | 
|  | ipmi_smi_t           intf = user->intf; | 
|  | struct ipmi_recv_msg *msg, *msg2; | 
|  | struct list_head     msgs; | 
|  |  | 
|  | INIT_LIST_HEAD(&msgs); | 
|  |  | 
|  | spin_lock_irqsave(&intf->events_lock, flags); | 
|  | user->gets_events = val; | 
|  |  | 
|  | if (intf->delivering_events) | 
|  | /* | 
|  | * Another thread is delivering events for this, so | 
|  | * let it handle any new events. | 
|  | */ | 
|  | goto out; | 
|  |  | 
|  | /* Deliver any queued events. */ | 
|  | while (user->gets_events && !list_empty(&intf->waiting_events)) { | 
|  | list_for_each_entry_safe(msg, msg2, &intf->waiting_events, link) | 
|  | list_move_tail(&msg->link, &msgs); | 
|  | intf->waiting_events_count = 0; | 
|  | if (intf->event_msg_printed) { | 
|  | printk(KERN_WARNING PFX "Event queue no longer" | 
|  | " full\n"); | 
|  | intf->event_msg_printed = 0; | 
|  | } | 
|  |  | 
|  | intf->delivering_events = 1; | 
|  | spin_unlock_irqrestore(&intf->events_lock, flags); | 
|  |  | 
|  | list_for_each_entry_safe(msg, msg2, &msgs, link) { | 
|  | msg->user = user; | 
|  | kref_get(&user->refcount); | 
|  | deliver_response(msg); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&intf->events_lock, flags); | 
|  | intf->delivering_events = 0; | 
|  | } | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&intf->events_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_set_gets_events); | 
|  |  | 
|  | static struct cmd_rcvr *find_cmd_rcvr(ipmi_smi_t    intf, | 
|  | unsigned char netfn, | 
|  | unsigned char cmd, | 
|  | unsigned char chan) | 
|  | { | 
|  | struct cmd_rcvr *rcvr; | 
|  |  | 
|  | list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { | 
|  | if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd) | 
|  | && (rcvr->chans & (1 << chan))) | 
|  | return rcvr; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int is_cmd_rcvr_exclusive(ipmi_smi_t    intf, | 
|  | unsigned char netfn, | 
|  | unsigned char cmd, | 
|  | unsigned int  chans) | 
|  | { | 
|  | struct cmd_rcvr *rcvr; | 
|  |  | 
|  | list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { | 
|  | if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd) | 
|  | && (rcvr->chans & chans)) | 
|  | return 0; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int ipmi_register_for_cmd(ipmi_user_t   user, | 
|  | unsigned char netfn, | 
|  | unsigned char cmd, | 
|  | unsigned int  chans) | 
|  | { | 
|  | ipmi_smi_t      intf = user->intf; | 
|  | struct cmd_rcvr *rcvr; | 
|  | int             rv = 0; | 
|  |  | 
|  |  | 
|  | rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL); | 
|  | if (!rcvr) | 
|  | return -ENOMEM; | 
|  | rcvr->cmd = cmd; | 
|  | rcvr->netfn = netfn; | 
|  | rcvr->chans = chans; | 
|  | rcvr->user = user; | 
|  |  | 
|  | mutex_lock(&intf->cmd_rcvrs_mutex); | 
|  | /* Make sure the command/netfn is not already registered. */ | 
|  | if (!is_cmd_rcvr_exclusive(intf, netfn, cmd, chans)) { | 
|  | rv = -EBUSY; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | list_add_rcu(&rcvr->link, &intf->cmd_rcvrs); | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&intf->cmd_rcvrs_mutex); | 
|  | if (rv) | 
|  | kfree(rcvr); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_register_for_cmd); | 
|  |  | 
|  | int ipmi_unregister_for_cmd(ipmi_user_t   user, | 
|  | unsigned char netfn, | 
|  | unsigned char cmd, | 
|  | unsigned int  chans) | 
|  | { | 
|  | ipmi_smi_t      intf = user->intf; | 
|  | struct cmd_rcvr *rcvr; | 
|  | struct cmd_rcvr *rcvrs = NULL; | 
|  | int i, rv = -ENOENT; | 
|  |  | 
|  | mutex_lock(&intf->cmd_rcvrs_mutex); | 
|  | for (i = 0; i < IPMI_NUM_CHANNELS; i++) { | 
|  | if (((1 << i) & chans) == 0) | 
|  | continue; | 
|  | rcvr = find_cmd_rcvr(intf, netfn, cmd, i); | 
|  | if (rcvr == NULL) | 
|  | continue; | 
|  | if (rcvr->user == user) { | 
|  | rv = 0; | 
|  | rcvr->chans &= ~chans; | 
|  | if (rcvr->chans == 0) { | 
|  | list_del_rcu(&rcvr->link); | 
|  | rcvr->next = rcvrs; | 
|  | rcvrs = rcvr; | 
|  | } | 
|  | } | 
|  | } | 
|  | mutex_unlock(&intf->cmd_rcvrs_mutex); | 
|  | synchronize_rcu(); | 
|  | while (rcvrs) { | 
|  | rcvr = rcvrs; | 
|  | rcvrs = rcvr->next; | 
|  | kfree(rcvr); | 
|  | } | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_unregister_for_cmd); | 
|  |  | 
|  | static unsigned char | 
|  | ipmb_checksum(unsigned char *data, int size) | 
|  | { | 
|  | unsigned char csum = 0; | 
|  |  | 
|  | for (; size > 0; size--, data++) | 
|  | csum += *data; | 
|  |  | 
|  | return -csum; | 
|  | } | 
|  |  | 
|  | static inline void format_ipmb_msg(struct ipmi_smi_msg   *smi_msg, | 
|  | struct kernel_ipmi_msg *msg, | 
|  | struct ipmi_ipmb_addr *ipmb_addr, | 
|  | long                  msgid, | 
|  | unsigned char         ipmb_seq, | 
|  | int                   broadcast, | 
|  | unsigned char         source_address, | 
|  | unsigned char         source_lun) | 
|  | { | 
|  | int i = broadcast; | 
|  |  | 
|  | /* Format the IPMB header data. */ | 
|  | smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); | 
|  | smi_msg->data[1] = IPMI_SEND_MSG_CMD; | 
|  | smi_msg->data[2] = ipmb_addr->channel; | 
|  | if (broadcast) | 
|  | smi_msg->data[3] = 0; | 
|  | smi_msg->data[i+3] = ipmb_addr->slave_addr; | 
|  | smi_msg->data[i+4] = (msg->netfn << 2) | (ipmb_addr->lun & 0x3); | 
|  | smi_msg->data[i+5] = ipmb_checksum(&(smi_msg->data[i+3]), 2); | 
|  | smi_msg->data[i+6] = source_address; | 
|  | smi_msg->data[i+7] = (ipmb_seq << 2) | source_lun; | 
|  | smi_msg->data[i+8] = msg->cmd; | 
|  |  | 
|  | /* Now tack on the data to the message. */ | 
|  | if (msg->data_len > 0) | 
|  | memcpy(&(smi_msg->data[i+9]), msg->data, | 
|  | msg->data_len); | 
|  | smi_msg->data_size = msg->data_len + 9; | 
|  |  | 
|  | /* Now calculate the checksum and tack it on. */ | 
|  | smi_msg->data[i+smi_msg->data_size] | 
|  | = ipmb_checksum(&(smi_msg->data[i+6]), | 
|  | smi_msg->data_size-6); | 
|  |  | 
|  | /* | 
|  | * Add on the checksum size and the offset from the | 
|  | * broadcast. | 
|  | */ | 
|  | smi_msg->data_size += 1 + i; | 
|  |  | 
|  | smi_msg->msgid = msgid; | 
|  | } | 
|  |  | 
|  | static inline void format_lan_msg(struct ipmi_smi_msg   *smi_msg, | 
|  | struct kernel_ipmi_msg *msg, | 
|  | struct ipmi_lan_addr  *lan_addr, | 
|  | long                  msgid, | 
|  | unsigned char         ipmb_seq, | 
|  | unsigned char         source_lun) | 
|  | { | 
|  | /* Format the IPMB header data. */ | 
|  | smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); | 
|  | smi_msg->data[1] = IPMI_SEND_MSG_CMD; | 
|  | smi_msg->data[2] = lan_addr->channel; | 
|  | smi_msg->data[3] = lan_addr->session_handle; | 
|  | smi_msg->data[4] = lan_addr->remote_SWID; | 
|  | smi_msg->data[5] = (msg->netfn << 2) | (lan_addr->lun & 0x3); | 
|  | smi_msg->data[6] = ipmb_checksum(&(smi_msg->data[4]), 2); | 
|  | smi_msg->data[7] = lan_addr->local_SWID; | 
|  | smi_msg->data[8] = (ipmb_seq << 2) | source_lun; | 
|  | smi_msg->data[9] = msg->cmd; | 
|  |  | 
|  | /* Now tack on the data to the message. */ | 
|  | if (msg->data_len > 0) | 
|  | memcpy(&(smi_msg->data[10]), msg->data, | 
|  | msg->data_len); | 
|  | smi_msg->data_size = msg->data_len + 10; | 
|  |  | 
|  | /* Now calculate the checksum and tack it on. */ | 
|  | smi_msg->data[smi_msg->data_size] | 
|  | = ipmb_checksum(&(smi_msg->data[7]), | 
|  | smi_msg->data_size-7); | 
|  |  | 
|  | /* | 
|  | * Add on the checksum size and the offset from the | 
|  | * broadcast. | 
|  | */ | 
|  | smi_msg->data_size += 1; | 
|  |  | 
|  | smi_msg->msgid = msgid; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Separate from ipmi_request so that the user does not have to be | 
|  | * supplied in certain circumstances (mainly at panic time).  If | 
|  | * messages are supplied, they will be freed, even if an error | 
|  | * occurs. | 
|  | */ | 
|  | static int i_ipmi_request(ipmi_user_t          user, | 
|  | ipmi_smi_t           intf, | 
|  | struct ipmi_addr     *addr, | 
|  | long                 msgid, | 
|  | struct kernel_ipmi_msg *msg, | 
|  | void                 *user_msg_data, | 
|  | void                 *supplied_smi, | 
|  | struct ipmi_recv_msg *supplied_recv, | 
|  | int                  priority, | 
|  | unsigned char        source_address, | 
|  | unsigned char        source_lun, | 
|  | int                  retries, | 
|  | unsigned int         retry_time_ms) | 
|  | { | 
|  | int                      rv = 0; | 
|  | struct ipmi_smi_msg      *smi_msg; | 
|  | struct ipmi_recv_msg     *recv_msg; | 
|  | unsigned long            flags; | 
|  | struct ipmi_smi_handlers *handlers; | 
|  |  | 
|  |  | 
|  | if (supplied_recv) | 
|  | recv_msg = supplied_recv; | 
|  | else { | 
|  | recv_msg = ipmi_alloc_recv_msg(); | 
|  | if (recv_msg == NULL) | 
|  | return -ENOMEM; | 
|  | } | 
|  | recv_msg->user_msg_data = user_msg_data; | 
|  |  | 
|  | if (supplied_smi) | 
|  | smi_msg = (struct ipmi_smi_msg *) supplied_smi; | 
|  | else { | 
|  | smi_msg = ipmi_alloc_smi_msg(); | 
|  | if (smi_msg == NULL) { | 
|  | ipmi_free_recv_msg(recv_msg); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  | handlers = intf->handlers; | 
|  | if (!handlers) { | 
|  | rv = -ENODEV; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | recv_msg->user = user; | 
|  | if (user) | 
|  | kref_get(&user->refcount); | 
|  | recv_msg->msgid = msgid; | 
|  | /* | 
|  | * Store the message to send in the receive message so timeout | 
|  | * responses can get the proper response data. | 
|  | */ | 
|  | recv_msg->msg = *msg; | 
|  |  | 
|  | if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { | 
|  | struct ipmi_system_interface_addr *smi_addr; | 
|  |  | 
|  | if (msg->netfn & 1) { | 
|  | /* Responses are not allowed to the SMI. */ | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | smi_addr = (struct ipmi_system_interface_addr *) addr; | 
|  | if (smi_addr->lun > 3) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | memcpy(&recv_msg->addr, smi_addr, sizeof(*smi_addr)); | 
|  |  | 
|  | if ((msg->netfn == IPMI_NETFN_APP_REQUEST) | 
|  | && ((msg->cmd == IPMI_SEND_MSG_CMD) | 
|  | || (msg->cmd == IPMI_GET_MSG_CMD) | 
|  | || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD))) { | 
|  | /* | 
|  | * We don't let the user do these, since we manage | 
|  | * the sequence numbers. | 
|  | */ | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | if (((msg->netfn == IPMI_NETFN_APP_REQUEST) | 
|  | && ((msg->cmd == IPMI_COLD_RESET_CMD) | 
|  | || (msg->cmd == IPMI_WARM_RESET_CMD))) | 
|  | || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST)) { | 
|  | spin_lock_irqsave(&intf->maintenance_mode_lock, flags); | 
|  | intf->auto_maintenance_timeout | 
|  | = IPMI_MAINTENANCE_MODE_TIMEOUT; | 
|  | if (!intf->maintenance_mode | 
|  | && !intf->maintenance_mode_enable) { | 
|  | intf->maintenance_mode_enable = 1; | 
|  | maintenance_mode_update(intf); | 
|  | } | 
|  | spin_unlock_irqrestore(&intf->maintenance_mode_lock, | 
|  | flags); | 
|  | } | 
|  |  | 
|  | if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EMSGSIZE; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | smi_msg->data[0] = (msg->netfn << 2) | (smi_addr->lun & 0x3); | 
|  | smi_msg->data[1] = msg->cmd; | 
|  | smi_msg->msgid = msgid; | 
|  | smi_msg->user_data = recv_msg; | 
|  | if (msg->data_len > 0) | 
|  | memcpy(&(smi_msg->data[2]), msg->data, msg->data_len); | 
|  | smi_msg->data_size = msg->data_len + 2; | 
|  | ipmi_inc_stat(intf, sent_local_commands); | 
|  | } else if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) { | 
|  | struct ipmi_ipmb_addr *ipmb_addr; | 
|  | unsigned char         ipmb_seq; | 
|  | long                  seqid; | 
|  | int                   broadcast = 0; | 
|  |  | 
|  | if (addr->channel >= IPMI_MAX_CHANNELS) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | if (intf->channels[addr->channel].medium | 
|  | != IPMI_CHANNEL_MEDIUM_IPMB) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | if (retries < 0) { | 
|  | if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) | 
|  | retries = 0; /* Don't retry broadcasts. */ | 
|  | else | 
|  | retries = 4; | 
|  | } | 
|  | if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) { | 
|  | /* | 
|  | * Broadcasts add a zero at the beginning of the | 
|  | * message, but otherwise is the same as an IPMB | 
|  | * address. | 
|  | */ | 
|  | addr->addr_type = IPMI_IPMB_ADDR_TYPE; | 
|  | broadcast = 1; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Default to 1 second retries. */ | 
|  | if (retry_time_ms == 0) | 
|  | retry_time_ms = 1000; | 
|  |  | 
|  | /* | 
|  | * 9 for the header and 1 for the checksum, plus | 
|  | * possibly one for the broadcast. | 
|  | */ | 
|  | if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EMSGSIZE; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | ipmb_addr = (struct ipmi_ipmb_addr *) addr; | 
|  | if (ipmb_addr->lun > 3) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr)); | 
|  |  | 
|  | if (recv_msg->msg.netfn & 0x1) { | 
|  | /* | 
|  | * It's a response, so use the user's sequence | 
|  | * from msgid. | 
|  | */ | 
|  | ipmi_inc_stat(intf, sent_ipmb_responses); | 
|  | format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid, | 
|  | msgid, broadcast, | 
|  | source_address, source_lun); | 
|  |  | 
|  | /* | 
|  | * Save the receive message so we can use it | 
|  | * to deliver the response. | 
|  | */ | 
|  | smi_msg->user_data = recv_msg; | 
|  | } else { | 
|  | /* It's a command, so get a sequence for it. */ | 
|  |  | 
|  | spin_lock_irqsave(&(intf->seq_lock), flags); | 
|  |  | 
|  | /* | 
|  | * Create a sequence number with a 1 second | 
|  | * timeout and 4 retries. | 
|  | */ | 
|  | rv = intf_next_seq(intf, | 
|  | recv_msg, | 
|  | retry_time_ms, | 
|  | retries, | 
|  | broadcast, | 
|  | &ipmb_seq, | 
|  | &seqid); | 
|  | if (rv) { | 
|  | /* | 
|  | * We have used up all the sequence numbers, | 
|  | * probably, so abort. | 
|  | */ | 
|  | spin_unlock_irqrestore(&(intf->seq_lock), | 
|  | flags); | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | ipmi_inc_stat(intf, sent_ipmb_commands); | 
|  |  | 
|  | /* | 
|  | * Store the sequence number in the message, | 
|  | * so that when the send message response | 
|  | * comes back we can start the timer. | 
|  | */ | 
|  | format_ipmb_msg(smi_msg, msg, ipmb_addr, | 
|  | STORE_SEQ_IN_MSGID(ipmb_seq, seqid), | 
|  | ipmb_seq, broadcast, | 
|  | source_address, source_lun); | 
|  |  | 
|  | /* | 
|  | * Copy the message into the recv message data, so we | 
|  | * can retransmit it later if necessary. | 
|  | */ | 
|  | memcpy(recv_msg->msg_data, smi_msg->data, | 
|  | smi_msg->data_size); | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  | recv_msg->msg.data_len = smi_msg->data_size; | 
|  |  | 
|  | /* | 
|  | * We don't unlock until here, because we need | 
|  | * to copy the completed message into the | 
|  | * recv_msg before we release the lock. | 
|  | * Otherwise, race conditions may bite us.  I | 
|  | * know that's pretty paranoid, but I prefer | 
|  | * to be correct. | 
|  | */ | 
|  | spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
|  | } | 
|  | } else if (is_lan_addr(addr)) { | 
|  | struct ipmi_lan_addr  *lan_addr; | 
|  | unsigned char         ipmb_seq; | 
|  | long                  seqid; | 
|  |  | 
|  | if (addr->channel >= IPMI_MAX_CHANNELS) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | if ((intf->channels[addr->channel].medium | 
|  | != IPMI_CHANNEL_MEDIUM_8023LAN) | 
|  | && (intf->channels[addr->channel].medium | 
|  | != IPMI_CHANNEL_MEDIUM_ASYNC)) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | retries = 4; | 
|  |  | 
|  | /* Default to 1 second retries. */ | 
|  | if (retry_time_ms == 0) | 
|  | retry_time_ms = 1000; | 
|  |  | 
|  | /* 11 for the header and 1 for the checksum. */ | 
|  | if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EMSGSIZE; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | lan_addr = (struct ipmi_lan_addr *) addr; | 
|  | if (lan_addr->lun > 3) { | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr)); | 
|  |  | 
|  | if (recv_msg->msg.netfn & 0x1) { | 
|  | /* | 
|  | * It's a response, so use the user's sequence | 
|  | * from msgid. | 
|  | */ | 
|  | ipmi_inc_stat(intf, sent_lan_responses); | 
|  | format_lan_msg(smi_msg, msg, lan_addr, msgid, | 
|  | msgid, source_lun); | 
|  |  | 
|  | /* | 
|  | * Save the receive message so we can use it | 
|  | * to deliver the response. | 
|  | */ | 
|  | smi_msg->user_data = recv_msg; | 
|  | } else { | 
|  | /* It's a command, so get a sequence for it. */ | 
|  |  | 
|  | spin_lock_irqsave(&(intf->seq_lock), flags); | 
|  |  | 
|  | /* | 
|  | * Create a sequence number with a 1 second | 
|  | * timeout and 4 retries. | 
|  | */ | 
|  | rv = intf_next_seq(intf, | 
|  | recv_msg, | 
|  | retry_time_ms, | 
|  | retries, | 
|  | 0, | 
|  | &ipmb_seq, | 
|  | &seqid); | 
|  | if (rv) { | 
|  | /* | 
|  | * We have used up all the sequence numbers, | 
|  | * probably, so abort. | 
|  | */ | 
|  | spin_unlock_irqrestore(&(intf->seq_lock), | 
|  | flags); | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | ipmi_inc_stat(intf, sent_lan_commands); | 
|  |  | 
|  | /* | 
|  | * Store the sequence number in the message, | 
|  | * so that when the send message response | 
|  | * comes back we can start the timer. | 
|  | */ | 
|  | format_lan_msg(smi_msg, msg, lan_addr, | 
|  | STORE_SEQ_IN_MSGID(ipmb_seq, seqid), | 
|  | ipmb_seq, source_lun); | 
|  |  | 
|  | /* | 
|  | * Copy the message into the recv message data, so we | 
|  | * can retransmit it later if necessary. | 
|  | */ | 
|  | memcpy(recv_msg->msg_data, smi_msg->data, | 
|  | smi_msg->data_size); | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  | recv_msg->msg.data_len = smi_msg->data_size; | 
|  |  | 
|  | /* | 
|  | * We don't unlock until here, because we need | 
|  | * to copy the completed message into the | 
|  | * recv_msg before we release the lock. | 
|  | * Otherwise, race conditions may bite us.  I | 
|  | * know that's pretty paranoid, but I prefer | 
|  | * to be correct. | 
|  | */ | 
|  | spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
|  | } | 
|  | } else { | 
|  | /* Unknown address type. */ | 
|  | ipmi_inc_stat(intf, sent_invalid_commands); | 
|  | rv = -EINVAL; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG_MSGING | 
|  | { | 
|  | int m; | 
|  | for (m = 0; m < smi_msg->data_size; m++) | 
|  | printk(" %2.2x", smi_msg->data[m]); | 
|  | printk("\n"); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | handlers->sender(intf->send_info, smi_msg, priority); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_err: | 
|  | rcu_read_unlock(); | 
|  | ipmi_free_smi_msg(smi_msg); | 
|  | ipmi_free_recv_msg(recv_msg); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static int check_addr(ipmi_smi_t       intf, | 
|  | struct ipmi_addr *addr, | 
|  | unsigned char    *saddr, | 
|  | unsigned char    *lun) | 
|  | { | 
|  | if (addr->channel >= IPMI_MAX_CHANNELS) | 
|  | return -EINVAL; | 
|  | *lun = intf->channels[addr->channel].lun; | 
|  | *saddr = intf->channels[addr->channel].address; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ipmi_request_settime(ipmi_user_t      user, | 
|  | struct ipmi_addr *addr, | 
|  | long             msgid, | 
|  | struct kernel_ipmi_msg  *msg, | 
|  | void             *user_msg_data, | 
|  | int              priority, | 
|  | int              retries, | 
|  | unsigned int     retry_time_ms) | 
|  | { | 
|  | unsigned char saddr, lun; | 
|  | int           rv; | 
|  |  | 
|  | if (!user) | 
|  | return -EINVAL; | 
|  | rv = check_addr(user->intf, addr, &saddr, &lun); | 
|  | if (rv) | 
|  | return rv; | 
|  | return i_ipmi_request(user, | 
|  | user->intf, | 
|  | addr, | 
|  | msgid, | 
|  | msg, | 
|  | user_msg_data, | 
|  | NULL, NULL, | 
|  | priority, | 
|  | saddr, | 
|  | lun, | 
|  | retries, | 
|  | retry_time_ms); | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_request_settime); | 
|  |  | 
|  | int ipmi_request_supply_msgs(ipmi_user_t          user, | 
|  | struct ipmi_addr     *addr, | 
|  | long                 msgid, | 
|  | struct kernel_ipmi_msg *msg, | 
|  | void                 *user_msg_data, | 
|  | void                 *supplied_smi, | 
|  | struct ipmi_recv_msg *supplied_recv, | 
|  | int                  priority) | 
|  | { | 
|  | unsigned char saddr, lun; | 
|  | int           rv; | 
|  |  | 
|  | if (!user) | 
|  | return -EINVAL; | 
|  | rv = check_addr(user->intf, addr, &saddr, &lun); | 
|  | if (rv) | 
|  | return rv; | 
|  | return i_ipmi_request(user, | 
|  | user->intf, | 
|  | addr, | 
|  | msgid, | 
|  | msg, | 
|  | user_msg_data, | 
|  | supplied_smi, | 
|  | supplied_recv, | 
|  | priority, | 
|  | saddr, | 
|  | lun, | 
|  | -1, 0); | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_request_supply_msgs); | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | static int smi_ipmb_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ipmi_smi_t intf = m->private; | 
|  | int        i; | 
|  |  | 
|  | seq_printf(m, "%x", intf->channels[0].address); | 
|  | for (i = 1; i < IPMI_MAX_CHANNELS; i++) | 
|  | seq_printf(m, " %x", intf->channels[i].address); | 
|  | return seq_putc(m, '\n'); | 
|  | } | 
|  |  | 
|  | static int smi_ipmb_proc_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, smi_ipmb_proc_show, PDE(inode)->data); | 
|  | } | 
|  |  | 
|  | static const struct file_operations smi_ipmb_proc_ops = { | 
|  | .open		= smi_ipmb_proc_open, | 
|  | .read		= seq_read, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  |  | 
|  | static int smi_version_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ipmi_smi_t intf = m->private; | 
|  |  | 
|  | return seq_printf(m, "%u.%u\n", | 
|  | ipmi_version_major(&intf->bmc->id), | 
|  | ipmi_version_minor(&intf->bmc->id)); | 
|  | } | 
|  |  | 
|  | static int smi_version_proc_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, smi_version_proc_show, PDE(inode)->data); | 
|  | } | 
|  |  | 
|  | static const struct file_operations smi_version_proc_ops = { | 
|  | .open		= smi_version_proc_open, | 
|  | .read		= seq_read, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  |  | 
|  | static int smi_stats_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ipmi_smi_t intf = m->private; | 
|  |  | 
|  | seq_printf(m, "sent_invalid_commands:       %u\n", | 
|  | ipmi_get_stat(intf, sent_invalid_commands)); | 
|  | seq_printf(m, "sent_local_commands:         %u\n", | 
|  | ipmi_get_stat(intf, sent_local_commands)); | 
|  | seq_printf(m, "handled_local_responses:     %u\n", | 
|  | ipmi_get_stat(intf, handled_local_responses)); | 
|  | seq_printf(m, "unhandled_local_responses:   %u\n", | 
|  | ipmi_get_stat(intf, unhandled_local_responses)); | 
|  | seq_printf(m, "sent_ipmb_commands:          %u\n", | 
|  | ipmi_get_stat(intf, sent_ipmb_commands)); | 
|  | seq_printf(m, "sent_ipmb_command_errs:      %u\n", | 
|  | ipmi_get_stat(intf, sent_ipmb_command_errs)); | 
|  | seq_printf(m, "retransmitted_ipmb_commands: %u\n", | 
|  | ipmi_get_stat(intf, retransmitted_ipmb_commands)); | 
|  | seq_printf(m, "timed_out_ipmb_commands:     %u\n", | 
|  | ipmi_get_stat(intf, timed_out_ipmb_commands)); | 
|  | seq_printf(m, "timed_out_ipmb_broadcasts:   %u\n", | 
|  | ipmi_get_stat(intf, timed_out_ipmb_broadcasts)); | 
|  | seq_printf(m, "sent_ipmb_responses:         %u\n", | 
|  | ipmi_get_stat(intf, sent_ipmb_responses)); | 
|  | seq_printf(m, "handled_ipmb_responses:      %u\n", | 
|  | ipmi_get_stat(intf, handled_ipmb_responses)); | 
|  | seq_printf(m, "invalid_ipmb_responses:      %u\n", | 
|  | ipmi_get_stat(intf, invalid_ipmb_responses)); | 
|  | seq_printf(m, "unhandled_ipmb_responses:    %u\n", | 
|  | ipmi_get_stat(intf, unhandled_ipmb_responses)); | 
|  | seq_printf(m, "sent_lan_commands:           %u\n", | 
|  | ipmi_get_stat(intf, sent_lan_commands)); | 
|  | seq_printf(m, "sent_lan_command_errs:       %u\n", | 
|  | ipmi_get_stat(intf, sent_lan_command_errs)); | 
|  | seq_printf(m, "retransmitted_lan_commands:  %u\n", | 
|  | ipmi_get_stat(intf, retransmitted_lan_commands)); | 
|  | seq_printf(m, "timed_out_lan_commands:      %u\n", | 
|  | ipmi_get_stat(intf, timed_out_lan_commands)); | 
|  | seq_printf(m, "sent_lan_responses:          %u\n", | 
|  | ipmi_get_stat(intf, sent_lan_responses)); | 
|  | seq_printf(m, "handled_lan_responses:       %u\n", | 
|  | ipmi_get_stat(intf, handled_lan_responses)); | 
|  | seq_printf(m, "invalid_lan_responses:       %u\n", | 
|  | ipmi_get_stat(intf, invalid_lan_responses)); | 
|  | seq_printf(m, "unhandled_lan_responses:     %u\n", | 
|  | ipmi_get_stat(intf, unhandled_lan_responses)); | 
|  | seq_printf(m, "handled_commands:            %u\n", | 
|  | ipmi_get_stat(intf, handled_commands)); | 
|  | seq_printf(m, "invalid_commands:            %u\n", | 
|  | ipmi_get_stat(intf, invalid_commands)); | 
|  | seq_printf(m, "unhandled_commands:          %u\n", | 
|  | ipmi_get_stat(intf, unhandled_commands)); | 
|  | seq_printf(m, "invalid_events:              %u\n", | 
|  | ipmi_get_stat(intf, invalid_events)); | 
|  | seq_printf(m, "events:                      %u\n", | 
|  | ipmi_get_stat(intf, events)); | 
|  | seq_printf(m, "failed rexmit LAN msgs:      %u\n", | 
|  | ipmi_get_stat(intf, dropped_rexmit_lan_commands)); | 
|  | seq_printf(m, "failed rexmit IPMB msgs:     %u\n", | 
|  | ipmi_get_stat(intf, dropped_rexmit_ipmb_commands)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int smi_stats_proc_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, smi_stats_proc_show, PDE(inode)->data); | 
|  | } | 
|  |  | 
|  | static const struct file_operations smi_stats_proc_ops = { | 
|  | .open		= smi_stats_proc_open, | 
|  | .read		= seq_read, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  | #endif /* CONFIG_PROC_FS */ | 
|  |  | 
|  | int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, | 
|  | const struct file_operations *proc_ops, | 
|  | void *data) | 
|  | { | 
|  | int                    rv = 0; | 
|  | #ifdef CONFIG_PROC_FS | 
|  | struct proc_dir_entry  *file; | 
|  | struct ipmi_proc_entry *entry; | 
|  |  | 
|  | /* Create a list element. */ | 
|  | entry = kmalloc(sizeof(*entry), GFP_KERNEL); | 
|  | if (!entry) | 
|  | return -ENOMEM; | 
|  | entry->name = kmalloc(strlen(name)+1, GFP_KERNEL); | 
|  | if (!entry->name) { | 
|  | kfree(entry); | 
|  | return -ENOMEM; | 
|  | } | 
|  | strcpy(entry->name, name); | 
|  |  | 
|  | file = proc_create_data(name, 0, smi->proc_dir, proc_ops, data); | 
|  | if (!file) { | 
|  | kfree(entry->name); | 
|  | kfree(entry); | 
|  | rv = -ENOMEM; | 
|  | } else { | 
|  | mutex_lock(&smi->proc_entry_lock); | 
|  | /* Stick it on the list. */ | 
|  | entry->next = smi->proc_entries; | 
|  | smi->proc_entries = entry; | 
|  | mutex_unlock(&smi->proc_entry_lock); | 
|  | } | 
|  | #endif /* CONFIG_PROC_FS */ | 
|  |  | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_smi_add_proc_entry); | 
|  |  | 
|  | static int add_proc_entries(ipmi_smi_t smi, int num) | 
|  | { | 
|  | int rv = 0; | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | sprintf(smi->proc_dir_name, "%d", num); | 
|  | smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root); | 
|  | if (!smi->proc_dir) | 
|  | rv = -ENOMEM; | 
|  |  | 
|  | if (rv == 0) | 
|  | rv = ipmi_smi_add_proc_entry(smi, "stats", | 
|  | &smi_stats_proc_ops, | 
|  | smi); | 
|  |  | 
|  | if (rv == 0) | 
|  | rv = ipmi_smi_add_proc_entry(smi, "ipmb", | 
|  | &smi_ipmb_proc_ops, | 
|  | smi); | 
|  |  | 
|  | if (rv == 0) | 
|  | rv = ipmi_smi_add_proc_entry(smi, "version", | 
|  | &smi_version_proc_ops, | 
|  | smi); | 
|  | #endif /* CONFIG_PROC_FS */ | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static void remove_proc_entries(ipmi_smi_t smi) | 
|  | { | 
|  | #ifdef CONFIG_PROC_FS | 
|  | struct ipmi_proc_entry *entry; | 
|  |  | 
|  | mutex_lock(&smi->proc_entry_lock); | 
|  | while (smi->proc_entries) { | 
|  | entry = smi->proc_entries; | 
|  | smi->proc_entries = entry->next; | 
|  |  | 
|  | remove_proc_entry(entry->name, smi->proc_dir); | 
|  | kfree(entry->name); | 
|  | kfree(entry); | 
|  | } | 
|  | mutex_unlock(&smi->proc_entry_lock); | 
|  | remove_proc_entry(smi->proc_dir_name, proc_ipmi_root); | 
|  | #endif /* CONFIG_PROC_FS */ | 
|  | } | 
|  |  | 
|  | static int __find_bmc_guid(struct device *dev, void *data) | 
|  | { | 
|  | unsigned char *id = data; | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  | return memcmp(bmc->guid, id, 16) == 0; | 
|  | } | 
|  |  | 
|  | static struct bmc_device *ipmi_find_bmc_guid(struct device_driver *drv, | 
|  | unsigned char *guid) | 
|  | { | 
|  | struct device *dev; | 
|  |  | 
|  | dev = driver_find_device(drv, NULL, guid, __find_bmc_guid); | 
|  | if (dev) | 
|  | return dev_get_drvdata(dev); | 
|  | else | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct prod_dev_id { | 
|  | unsigned int  product_id; | 
|  | unsigned char device_id; | 
|  | }; | 
|  |  | 
|  | static int __find_bmc_prod_dev_id(struct device *dev, void *data) | 
|  | { | 
|  | struct prod_dev_id *id = data; | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return (bmc->id.product_id == id->product_id | 
|  | && bmc->id.device_id == id->device_id); | 
|  | } | 
|  |  | 
|  | static struct bmc_device *ipmi_find_bmc_prod_dev_id( | 
|  | struct device_driver *drv, | 
|  | unsigned int product_id, unsigned char device_id) | 
|  | { | 
|  | struct prod_dev_id id = { | 
|  | .product_id = product_id, | 
|  | .device_id = device_id, | 
|  | }; | 
|  | struct device *dev; | 
|  |  | 
|  | dev = driver_find_device(drv, NULL, &id, __find_bmc_prod_dev_id); | 
|  | if (dev) | 
|  | return dev_get_drvdata(dev); | 
|  | else | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static ssize_t device_id_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 10, "%u\n", bmc->id.device_id); | 
|  | } | 
|  |  | 
|  | static ssize_t provides_dev_sdrs_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 10, "%u\n", | 
|  | (bmc->id.device_revision & 0x80) >> 7); | 
|  | } | 
|  |  | 
|  | static ssize_t revision_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 20, "%u\n", | 
|  | bmc->id.device_revision & 0x0F); | 
|  | } | 
|  |  | 
|  | static ssize_t firmware_rev_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 20, "%u.%x\n", bmc->id.firmware_revision_1, | 
|  | bmc->id.firmware_revision_2); | 
|  | } | 
|  |  | 
|  | static ssize_t ipmi_version_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 20, "%u.%u\n", | 
|  | ipmi_version_major(&bmc->id), | 
|  | ipmi_version_minor(&bmc->id)); | 
|  | } | 
|  |  | 
|  | static ssize_t add_dev_support_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 10, "0x%02x\n", | 
|  | bmc->id.additional_device_support); | 
|  | } | 
|  |  | 
|  | static ssize_t manufacturer_id_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 20, "0x%6.6x\n", bmc->id.manufacturer_id); | 
|  | } | 
|  |  | 
|  | static ssize_t product_id_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 10, "0x%4.4x\n", bmc->id.product_id); | 
|  | } | 
|  |  | 
|  | static ssize_t aux_firmware_rev_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 21, "0x%02x 0x%02x 0x%02x 0x%02x\n", | 
|  | bmc->id.aux_firmware_revision[3], | 
|  | bmc->id.aux_firmware_revision[2], | 
|  | bmc->id.aux_firmware_revision[1], | 
|  | bmc->id.aux_firmware_revision[0]); | 
|  | } | 
|  |  | 
|  | static ssize_t guid_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct bmc_device *bmc = dev_get_drvdata(dev); | 
|  |  | 
|  | return snprintf(buf, 100, "%Lx%Lx\n", | 
|  | (long long) bmc->guid[0], | 
|  | (long long) bmc->guid[8]); | 
|  | } | 
|  |  | 
|  | static void remove_files(struct bmc_device *bmc) | 
|  | { | 
|  | if (!bmc->dev) | 
|  | return; | 
|  |  | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->device_id_attr); | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->provides_dev_sdrs_attr); | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->revision_attr); | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->firmware_rev_attr); | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->version_attr); | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->add_dev_support_attr); | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->manufacturer_id_attr); | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->product_id_attr); | 
|  |  | 
|  | if (bmc->id.aux_firmware_revision_set) | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->aux_firmware_rev_attr); | 
|  | if (bmc->guid_set) | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->guid_attr); | 
|  | } | 
|  |  | 
|  | static void | 
|  | cleanup_bmc_device(struct kref *ref) | 
|  | { | 
|  | struct bmc_device *bmc; | 
|  |  | 
|  | bmc = container_of(ref, struct bmc_device, refcount); | 
|  |  | 
|  | remove_files(bmc); | 
|  | platform_device_unregister(bmc->dev); | 
|  | kfree(bmc); | 
|  | } | 
|  |  | 
|  | static void ipmi_bmc_unregister(ipmi_smi_t intf) | 
|  | { | 
|  | struct bmc_device *bmc = intf->bmc; | 
|  |  | 
|  | if (intf->sysfs_name) { | 
|  | sysfs_remove_link(&intf->si_dev->kobj, intf->sysfs_name); | 
|  | kfree(intf->sysfs_name); | 
|  | intf->sysfs_name = NULL; | 
|  | } | 
|  | if (intf->my_dev_name) { | 
|  | sysfs_remove_link(&bmc->dev->dev.kobj, intf->my_dev_name); | 
|  | kfree(intf->my_dev_name); | 
|  | intf->my_dev_name = NULL; | 
|  | } | 
|  |  | 
|  | mutex_lock(&ipmidriver_mutex); | 
|  | kref_put(&bmc->refcount, cleanup_bmc_device); | 
|  | intf->bmc = NULL; | 
|  | mutex_unlock(&ipmidriver_mutex); | 
|  | } | 
|  |  | 
|  | static int create_files(struct bmc_device *bmc) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | bmc->device_id_attr.attr.name = "device_id"; | 
|  | bmc->device_id_attr.attr.mode = S_IRUGO; | 
|  | bmc->device_id_attr.show = device_id_show; | 
|  | sysfs_attr_init(&bmc->device_id_attr.attr); | 
|  |  | 
|  | bmc->provides_dev_sdrs_attr.attr.name = "provides_device_sdrs"; | 
|  | bmc->provides_dev_sdrs_attr.attr.mode = S_IRUGO; | 
|  | bmc->provides_dev_sdrs_attr.show = provides_dev_sdrs_show; | 
|  | sysfs_attr_init(&bmc->provides_dev_sdrs_attr.attr); | 
|  |  | 
|  | bmc->revision_attr.attr.name = "revision"; | 
|  | bmc->revision_attr.attr.mode = S_IRUGO; | 
|  | bmc->revision_attr.show = revision_show; | 
|  | sysfs_attr_init(&bmc->revision_attr.attr); | 
|  |  | 
|  | bmc->firmware_rev_attr.attr.name = "firmware_revision"; | 
|  | bmc->firmware_rev_attr.attr.mode = S_IRUGO; | 
|  | bmc->firmware_rev_attr.show = firmware_rev_show; | 
|  | sysfs_attr_init(&bmc->firmware_rev_attr.attr); | 
|  |  | 
|  | bmc->version_attr.attr.name = "ipmi_version"; | 
|  | bmc->version_attr.attr.mode = S_IRUGO; | 
|  | bmc->version_attr.show = ipmi_version_show; | 
|  | sysfs_attr_init(&bmc->version_attr.attr); | 
|  |  | 
|  | bmc->add_dev_support_attr.attr.name = "additional_device_support"; | 
|  | bmc->add_dev_support_attr.attr.mode = S_IRUGO; | 
|  | bmc->add_dev_support_attr.show = add_dev_support_show; | 
|  | sysfs_attr_init(&bmc->add_dev_support_attr.attr); | 
|  |  | 
|  | bmc->manufacturer_id_attr.attr.name = "manufacturer_id"; | 
|  | bmc->manufacturer_id_attr.attr.mode = S_IRUGO; | 
|  | bmc->manufacturer_id_attr.show = manufacturer_id_show; | 
|  | sysfs_attr_init(&bmc->manufacturer_id_attr.attr); | 
|  |  | 
|  | bmc->product_id_attr.attr.name = "product_id"; | 
|  | bmc->product_id_attr.attr.mode = S_IRUGO; | 
|  | bmc->product_id_attr.show = product_id_show; | 
|  | sysfs_attr_init(&bmc->product_id_attr.attr); | 
|  |  | 
|  | bmc->guid_attr.attr.name = "guid"; | 
|  | bmc->guid_attr.attr.mode = S_IRUGO; | 
|  | bmc->guid_attr.show = guid_show; | 
|  | sysfs_attr_init(&bmc->guid_attr.attr); | 
|  |  | 
|  | bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision"; | 
|  | bmc->aux_firmware_rev_attr.attr.mode = S_IRUGO; | 
|  | bmc->aux_firmware_rev_attr.show = aux_firmware_rev_show; | 
|  | sysfs_attr_init(&bmc->aux_firmware_rev_attr.attr); | 
|  |  | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->device_id_attr); | 
|  | if (err) | 
|  | goto out; | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->provides_dev_sdrs_attr); | 
|  | if (err) | 
|  | goto out_devid; | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->revision_attr); | 
|  | if (err) | 
|  | goto out_sdrs; | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->firmware_rev_attr); | 
|  | if (err) | 
|  | goto out_rev; | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->version_attr); | 
|  | if (err) | 
|  | goto out_firm; | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->add_dev_support_attr); | 
|  | if (err) | 
|  | goto out_version; | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->manufacturer_id_attr); | 
|  | if (err) | 
|  | goto out_add_dev; | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->product_id_attr); | 
|  | if (err) | 
|  | goto out_manu; | 
|  | if (bmc->id.aux_firmware_revision_set) { | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->aux_firmware_rev_attr); | 
|  | if (err) | 
|  | goto out_prod_id; | 
|  | } | 
|  | if (bmc->guid_set) { | 
|  | err = device_create_file(&bmc->dev->dev, | 
|  | &bmc->guid_attr); | 
|  | if (err) | 
|  | goto out_aux_firm; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_aux_firm: | 
|  | if (bmc->id.aux_firmware_revision_set) | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->aux_firmware_rev_attr); | 
|  | out_prod_id: | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->product_id_attr); | 
|  | out_manu: | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->manufacturer_id_attr); | 
|  | out_add_dev: | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->add_dev_support_attr); | 
|  | out_version: | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->version_attr); | 
|  | out_firm: | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->firmware_rev_attr); | 
|  | out_rev: | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->revision_attr); | 
|  | out_sdrs: | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->provides_dev_sdrs_attr); | 
|  | out_devid: | 
|  | device_remove_file(&bmc->dev->dev, | 
|  | &bmc->device_id_attr); | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, | 
|  | const char *sysfs_name) | 
|  | { | 
|  | int               rv; | 
|  | struct bmc_device *bmc = intf->bmc; | 
|  | struct bmc_device *old_bmc; | 
|  | int               size; | 
|  | char              dummy[1]; | 
|  |  | 
|  | mutex_lock(&ipmidriver_mutex); | 
|  |  | 
|  | /* | 
|  | * Try to find if there is an bmc_device struct | 
|  | * representing the interfaced BMC already | 
|  | */ | 
|  | if (bmc->guid_set) | 
|  | old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid); | 
|  | else | 
|  | old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, | 
|  | bmc->id.product_id, | 
|  | bmc->id.device_id); | 
|  |  | 
|  | /* | 
|  | * If there is already an bmc_device, free the new one, | 
|  | * otherwise register the new BMC device | 
|  | */ | 
|  | if (old_bmc) { | 
|  | kfree(bmc); | 
|  | intf->bmc = old_bmc; | 
|  | bmc = old_bmc; | 
|  |  | 
|  | kref_get(&bmc->refcount); | 
|  | mutex_unlock(&ipmidriver_mutex); | 
|  |  | 
|  | printk(KERN_INFO | 
|  | "ipmi: interfacing existing BMC (man_id: 0x%6.6x," | 
|  | " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n", | 
|  | bmc->id.manufacturer_id, | 
|  | bmc->id.product_id, | 
|  | bmc->id.device_id); | 
|  | } else { | 
|  | char name[14]; | 
|  | unsigned char orig_dev_id = bmc->id.device_id; | 
|  | int warn_printed = 0; | 
|  |  | 
|  | snprintf(name, sizeof(name), | 
|  | "ipmi_bmc.%4.4x", bmc->id.product_id); | 
|  |  | 
|  | while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, | 
|  | bmc->id.product_id, | 
|  | bmc->id.device_id)) { | 
|  | if (!warn_printed) { | 
|  | printk(KERN_WARNING PFX | 
|  | "This machine has two different BMCs" | 
|  | " with the same product id and device" | 
|  | " id.  This is an error in the" | 
|  | " firmware, but incrementing the" | 
|  | " device id to work around the problem." | 
|  | " Prod ID = 0x%x, Dev ID = 0x%x\n", | 
|  | bmc->id.product_id, bmc->id.device_id); | 
|  | warn_printed = 1; | 
|  | } | 
|  | bmc->id.device_id++; /* Wraps at 255 */ | 
|  | if (bmc->id.device_id == orig_dev_id) { | 
|  | printk(KERN_ERR PFX | 
|  | "Out of device ids!\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | bmc->dev = platform_device_alloc(name, bmc->id.device_id); | 
|  | if (!bmc->dev) { | 
|  | mutex_unlock(&ipmidriver_mutex); | 
|  | printk(KERN_ERR | 
|  | "ipmi_msghandler:" | 
|  | " Unable to allocate platform device\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | bmc->dev->dev.driver = &ipmidriver.driver; | 
|  | dev_set_drvdata(&bmc->dev->dev, bmc); | 
|  | kref_init(&bmc->refcount); | 
|  |  | 
|  | rv = platform_device_add(bmc->dev); | 
|  | mutex_unlock(&ipmidriver_mutex); | 
|  | if (rv) { | 
|  | platform_device_put(bmc->dev); | 
|  | bmc->dev = NULL; | 
|  | printk(KERN_ERR | 
|  | "ipmi_msghandler:" | 
|  | " Unable to register bmc device: %d\n", | 
|  | rv); | 
|  | /* | 
|  | * Don't go to out_err, you can only do that if | 
|  | * the device is registered already. | 
|  | */ | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | rv = create_files(bmc); | 
|  | if (rv) { | 
|  | mutex_lock(&ipmidriver_mutex); | 
|  | platform_device_unregister(bmc->dev); | 
|  | mutex_unlock(&ipmidriver_mutex); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | dev_info(intf->si_dev, "Found new BMC (man_id: 0x%6.6x, " | 
|  | "prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n", | 
|  | bmc->id.manufacturer_id, | 
|  | bmc->id.product_id, | 
|  | bmc->id.device_id); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * create symlink from system interface device to bmc device | 
|  | * and back. | 
|  | */ | 
|  | intf->sysfs_name = kstrdup(sysfs_name, GFP_KERNEL); | 
|  | if (!intf->sysfs_name) { | 
|  | rv = -ENOMEM; | 
|  | printk(KERN_ERR | 
|  | "ipmi_msghandler: allocate link to BMC: %d\n", | 
|  | rv); | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | rv = sysfs_create_link(&intf->si_dev->kobj, | 
|  | &bmc->dev->dev.kobj, intf->sysfs_name); | 
|  | if (rv) { | 
|  | kfree(intf->sysfs_name); | 
|  | intf->sysfs_name = NULL; | 
|  | printk(KERN_ERR | 
|  | "ipmi_msghandler: Unable to create bmc symlink: %d\n", | 
|  | rv); | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | size = snprintf(dummy, 0, "ipmi%d", ifnum); | 
|  | intf->my_dev_name = kmalloc(size+1, GFP_KERNEL); | 
|  | if (!intf->my_dev_name) { | 
|  | kfree(intf->sysfs_name); | 
|  | intf->sysfs_name = NULL; | 
|  | rv = -ENOMEM; | 
|  | printk(KERN_ERR | 
|  | "ipmi_msghandler: allocate link from BMC: %d\n", | 
|  | rv); | 
|  | goto out_err; | 
|  | } | 
|  | snprintf(intf->my_dev_name, size+1, "ipmi%d", ifnum); | 
|  |  | 
|  | rv = sysfs_create_link(&bmc->dev->dev.kobj, &intf->si_dev->kobj, | 
|  | intf->my_dev_name); | 
|  | if (rv) { | 
|  | kfree(intf->sysfs_name); | 
|  | intf->sysfs_name = NULL; | 
|  | kfree(intf->my_dev_name); | 
|  | intf->my_dev_name = NULL; | 
|  | printk(KERN_ERR | 
|  | "ipmi_msghandler:" | 
|  | " Unable to create symlink to bmc: %d\n", | 
|  | rv); | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_err: | 
|  | ipmi_bmc_unregister(intf); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static int | 
|  | send_guid_cmd(ipmi_smi_t intf, int chan) | 
|  | { | 
|  | struct kernel_ipmi_msg            msg; | 
|  | struct ipmi_system_interface_addr si; | 
|  |  | 
|  | si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
|  | si.channel = IPMI_BMC_CHANNEL; | 
|  | si.lun = 0; | 
|  |  | 
|  | msg.netfn = IPMI_NETFN_APP_REQUEST; | 
|  | msg.cmd = IPMI_GET_DEVICE_GUID_CMD; | 
|  | msg.data = NULL; | 
|  | msg.data_len = 0; | 
|  | return i_ipmi_request(NULL, | 
|  | intf, | 
|  | (struct ipmi_addr *) &si, | 
|  | 0, | 
|  | &msg, | 
|  | intf, | 
|  | NULL, | 
|  | NULL, | 
|  | 0, | 
|  | intf->channels[0].address, | 
|  | intf->channels[0].lun, | 
|  | -1, 0); | 
|  | } | 
|  |  | 
|  | static void | 
|  | guid_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) | 
|  | { | 
|  | if ((msg->addr.addr_type != IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
|  | || (msg->msg.netfn != IPMI_NETFN_APP_RESPONSE) | 
|  | || (msg->msg.cmd != IPMI_GET_DEVICE_GUID_CMD)) | 
|  | /* Not for me */ | 
|  | return; | 
|  |  | 
|  | if (msg->msg.data[0] != 0) { | 
|  | /* Error from getting the GUID, the BMC doesn't have one. */ | 
|  | intf->bmc->guid_set = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (msg->msg.data_len < 17) { | 
|  | intf->bmc->guid_set = 0; | 
|  | printk(KERN_WARNING PFX | 
|  | "guid_handler: The GUID response from the BMC was too" | 
|  | " short, it was %d but should have been 17.  Assuming" | 
|  | " GUID is not available.\n", | 
|  | msg->msg.data_len); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | memcpy(intf->bmc->guid, msg->msg.data, 16); | 
|  | intf->bmc->guid_set = 1; | 
|  | out: | 
|  | wake_up(&intf->waitq); | 
|  | } | 
|  |  | 
|  | static void | 
|  | get_guid(ipmi_smi_t intf) | 
|  | { | 
|  | int rv; | 
|  |  | 
|  | intf->bmc->guid_set = 0x2; | 
|  | intf->null_user_handler = guid_handler; | 
|  | rv = send_guid_cmd(intf, 0); | 
|  | if (rv) | 
|  | /* Send failed, no GUID available. */ | 
|  | intf->bmc->guid_set = 0; | 
|  | wait_event(intf->waitq, intf->bmc->guid_set != 2); | 
|  | intf->null_user_handler = NULL; | 
|  | } | 
|  |  | 
|  | static int | 
|  | send_channel_info_cmd(ipmi_smi_t intf, int chan) | 
|  | { | 
|  | struct kernel_ipmi_msg            msg; | 
|  | unsigned char                     data[1]; | 
|  | struct ipmi_system_interface_addr si; | 
|  |  | 
|  | si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
|  | si.channel = IPMI_BMC_CHANNEL; | 
|  | si.lun = 0; | 
|  |  | 
|  | msg.netfn = IPMI_NETFN_APP_REQUEST; | 
|  | msg.cmd = IPMI_GET_CHANNEL_INFO_CMD; | 
|  | msg.data = data; | 
|  | msg.data_len = 1; | 
|  | data[0] = chan; | 
|  | return i_ipmi_request(NULL, | 
|  | intf, | 
|  | (struct ipmi_addr *) &si, | 
|  | 0, | 
|  | &msg, | 
|  | intf, | 
|  | NULL, | 
|  | NULL, | 
|  | 0, | 
|  | intf->channels[0].address, | 
|  | intf->channels[0].lun, | 
|  | -1, 0); | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) | 
|  | { | 
|  | int rv = 0; | 
|  | int chan; | 
|  |  | 
|  | if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
|  | && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) | 
|  | && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD)) { | 
|  | /* It's the one we want */ | 
|  | if (msg->msg.data[0] != 0) { | 
|  | /* Got an error from the channel, just go on. */ | 
|  |  | 
|  | if (msg->msg.data[0] == IPMI_INVALID_COMMAND_ERR) { | 
|  | /* | 
|  | * If the MC does not support this | 
|  | * command, that is legal.  We just | 
|  | * assume it has one IPMB at channel | 
|  | * zero. | 
|  | */ | 
|  | intf->channels[0].medium | 
|  | = IPMI_CHANNEL_MEDIUM_IPMB; | 
|  | intf->channels[0].protocol | 
|  | = IPMI_CHANNEL_PROTOCOL_IPMB; | 
|  | rv = -ENOSYS; | 
|  |  | 
|  | intf->curr_channel = IPMI_MAX_CHANNELS; | 
|  | wake_up(&intf->waitq); | 
|  | goto out; | 
|  | } | 
|  | goto next_channel; | 
|  | } | 
|  | if (msg->msg.data_len < 4) { | 
|  | /* Message not big enough, just go on. */ | 
|  | goto next_channel; | 
|  | } | 
|  | chan = intf->curr_channel; | 
|  | intf->channels[chan].medium = msg->msg.data[2] & 0x7f; | 
|  | intf->channels[chan].protocol = msg->msg.data[3] & 0x1f; | 
|  |  | 
|  | next_channel: | 
|  | intf->curr_channel++; | 
|  | if (intf->curr_channel >= IPMI_MAX_CHANNELS) | 
|  | wake_up(&intf->waitq); | 
|  | else | 
|  | rv = send_channel_info_cmd(intf, intf->curr_channel); | 
|  |  | 
|  | if (rv) { | 
|  | /* Got an error somehow, just give up. */ | 
|  | intf->curr_channel = IPMI_MAX_CHANNELS; | 
|  | wake_up(&intf->waitq); | 
|  |  | 
|  | printk(KERN_WARNING PFX | 
|  | "Error sending channel information: %d\n", | 
|  | rv); | 
|  | } | 
|  | } | 
|  | out: | 
|  | return; | 
|  | } | 
|  |  | 
|  | void ipmi_poll_interface(ipmi_user_t user) | 
|  | { | 
|  | ipmi_smi_t intf = user->intf; | 
|  |  | 
|  | if (intf->handlers->poll) | 
|  | intf->handlers->poll(intf->send_info); | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_poll_interface); | 
|  |  | 
|  | int ipmi_register_smi(struct ipmi_smi_handlers *handlers, | 
|  | void		       *send_info, | 
|  | struct ipmi_device_id    *device_id, | 
|  | struct device            *si_dev, | 
|  | const char               *sysfs_name, | 
|  | unsigned char            slave_addr) | 
|  | { | 
|  | int              i, j; | 
|  | int              rv; | 
|  | ipmi_smi_t       intf; | 
|  | ipmi_smi_t       tintf; | 
|  | struct list_head *link; | 
|  |  | 
|  | /* | 
|  | * Make sure the driver is actually initialized, this handles | 
|  | * problems with initialization order. | 
|  | */ | 
|  | if (!initialized) { | 
|  | rv = ipmi_init_msghandler(); | 
|  | if (rv) | 
|  | return rv; | 
|  | /* | 
|  | * The init code doesn't return an error if it was turned | 
|  | * off, but it won't initialize.  Check that. | 
|  | */ | 
|  | if (!initialized) | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | intf = kzalloc(sizeof(*intf), GFP_KERNEL); | 
|  | if (!intf) | 
|  | return -ENOMEM; | 
|  |  | 
|  | intf->ipmi_version_major = ipmi_version_major(device_id); | 
|  | intf->ipmi_version_minor = ipmi_version_minor(device_id); | 
|  |  | 
|  | intf->bmc = kzalloc(sizeof(*intf->bmc), GFP_KERNEL); | 
|  | if (!intf->bmc) { | 
|  | kfree(intf); | 
|  | return -ENOMEM; | 
|  | } | 
|  | intf->intf_num = -1; /* Mark it invalid for now. */ | 
|  | kref_init(&intf->refcount); | 
|  | intf->bmc->id = *device_id; | 
|  | intf->si_dev = si_dev; | 
|  | for (j = 0; j < IPMI_MAX_CHANNELS; j++) { | 
|  | intf->channels[j].address = IPMI_BMC_SLAVE_ADDR; | 
|  | intf->channels[j].lun = 2; | 
|  | } | 
|  | if (slave_addr != 0) | 
|  | intf->channels[0].address = slave_addr; | 
|  | INIT_LIST_HEAD(&intf->users); | 
|  | intf->handlers = handlers; | 
|  | intf->send_info = send_info; | 
|  | spin_lock_init(&intf->seq_lock); | 
|  | for (j = 0; j < IPMI_IPMB_NUM_SEQ; j++) { | 
|  | intf->seq_table[j].inuse = 0; | 
|  | intf->seq_table[j].seqid = 0; | 
|  | } | 
|  | intf->curr_seq = 0; | 
|  | #ifdef CONFIG_PROC_FS | 
|  | mutex_init(&intf->proc_entry_lock); | 
|  | #endif | 
|  | spin_lock_init(&intf->waiting_msgs_lock); | 
|  | INIT_LIST_HEAD(&intf->waiting_msgs); | 
|  | spin_lock_init(&intf->events_lock); | 
|  | INIT_LIST_HEAD(&intf->waiting_events); | 
|  | intf->waiting_events_count = 0; | 
|  | mutex_init(&intf->cmd_rcvrs_mutex); | 
|  | spin_lock_init(&intf->maintenance_mode_lock); | 
|  | INIT_LIST_HEAD(&intf->cmd_rcvrs); | 
|  | init_waitqueue_head(&intf->waitq); | 
|  | for (i = 0; i < IPMI_NUM_STATS; i++) | 
|  | atomic_set(&intf->stats[i], 0); | 
|  |  | 
|  | intf->proc_dir = NULL; | 
|  |  | 
|  | mutex_lock(&smi_watchers_mutex); | 
|  | mutex_lock(&ipmi_interfaces_mutex); | 
|  | /* Look for a hole in the numbers. */ | 
|  | i = 0; | 
|  | link = &ipmi_interfaces; | 
|  | list_for_each_entry_rcu(tintf, &ipmi_interfaces, link) { | 
|  | if (tintf->intf_num != i) { | 
|  | link = &tintf->link; | 
|  | break; | 
|  | } | 
|  | i++; | 
|  | } | 
|  | /* Add the new interface in numeric order. */ | 
|  | if (i == 0) | 
|  | list_add_rcu(&intf->link, &ipmi_interfaces); | 
|  | else | 
|  | list_add_tail_rcu(&intf->link, link); | 
|  |  | 
|  | rv = handlers->start_processing(send_info, intf); | 
|  | if (rv) | 
|  | goto out; | 
|  |  | 
|  | get_guid(intf); | 
|  |  | 
|  | if ((intf->ipmi_version_major > 1) | 
|  | || ((intf->ipmi_version_major == 1) | 
|  | && (intf->ipmi_version_minor >= 5))) { | 
|  | /* | 
|  | * Start scanning the channels to see what is | 
|  | * available. | 
|  | */ | 
|  | intf->null_user_handler = channel_handler; | 
|  | intf->curr_channel = 0; | 
|  | rv = send_channel_info_cmd(intf, 0); | 
|  | if (rv) | 
|  | goto out; | 
|  |  | 
|  | /* Wait for the channel info to be read. */ | 
|  | wait_event(intf->waitq, | 
|  | intf->curr_channel >= IPMI_MAX_CHANNELS); | 
|  | intf->null_user_handler = NULL; | 
|  | } else { | 
|  | /* Assume a single IPMB channel at zero. */ | 
|  | intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; | 
|  | intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB; | 
|  | intf->curr_channel = IPMI_MAX_CHANNELS; | 
|  | } | 
|  |  | 
|  | if (rv == 0) | 
|  | rv = add_proc_entries(intf, i); | 
|  |  | 
|  | rv = ipmi_bmc_register(intf, i, sysfs_name); | 
|  |  | 
|  | out: | 
|  | if (rv) { | 
|  | if (intf->proc_dir) | 
|  | remove_proc_entries(intf); | 
|  | intf->handlers = NULL; | 
|  | list_del_rcu(&intf->link); | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  | mutex_unlock(&smi_watchers_mutex); | 
|  | synchronize_rcu(); | 
|  | kref_put(&intf->refcount, intf_free); | 
|  | } else { | 
|  | /* | 
|  | * Keep memory order straight for RCU readers.  Make | 
|  | * sure everything else is committed to memory before | 
|  | * setting intf_num to mark the interface valid. | 
|  | */ | 
|  | smp_wmb(); | 
|  | intf->intf_num = i; | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  | /* After this point the interface is legal to use. */ | 
|  | call_smi_watchers(i, intf->si_dev); | 
|  | mutex_unlock(&smi_watchers_mutex); | 
|  | } | 
|  |  | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_register_smi); | 
|  |  | 
|  | static void cleanup_smi_msgs(ipmi_smi_t intf) | 
|  | { | 
|  | int              i; | 
|  | struct seq_table *ent; | 
|  |  | 
|  | /* No need for locks, the interface is down. */ | 
|  | for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { | 
|  | ent = &(intf->seq_table[i]); | 
|  | if (!ent->inuse) | 
|  | continue; | 
|  | deliver_err_response(ent->recv_msg, IPMI_ERR_UNSPECIFIED); | 
|  | } | 
|  | } | 
|  |  | 
|  | int ipmi_unregister_smi(ipmi_smi_t intf) | 
|  | { | 
|  | struct ipmi_smi_watcher *w; | 
|  | int    intf_num = intf->intf_num; | 
|  |  | 
|  | ipmi_bmc_unregister(intf); | 
|  |  | 
|  | mutex_lock(&smi_watchers_mutex); | 
|  | mutex_lock(&ipmi_interfaces_mutex); | 
|  | intf->intf_num = -1; | 
|  | intf->handlers = NULL; | 
|  | list_del_rcu(&intf->link); | 
|  | mutex_unlock(&ipmi_interfaces_mutex); | 
|  | synchronize_rcu(); | 
|  |  | 
|  | cleanup_smi_msgs(intf); | 
|  |  | 
|  | remove_proc_entries(intf); | 
|  |  | 
|  | /* | 
|  | * Call all the watcher interfaces to tell them that | 
|  | * an interface is gone. | 
|  | */ | 
|  | list_for_each_entry(w, &smi_watchers, link) | 
|  | w->smi_gone(intf_num); | 
|  | mutex_unlock(&smi_watchers_mutex); | 
|  |  | 
|  | kref_put(&intf->refcount, intf_free); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_unregister_smi); | 
|  |  | 
|  | static int handle_ipmb_get_msg_rsp(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | struct ipmi_ipmb_addr ipmb_addr; | 
|  | struct ipmi_recv_msg  *recv_msg; | 
|  |  | 
|  | /* | 
|  | * This is 11, not 10, because the response must contain a | 
|  | * completion code. | 
|  | */ | 
|  | if (msg->rsp_size < 11) { | 
|  | /* Message not big enough, just ignore it. */ | 
|  | ipmi_inc_stat(intf, invalid_ipmb_responses); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (msg->rsp[2] != 0) { | 
|  | /* An error getting the response, just ignore it. */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; | 
|  | ipmb_addr.slave_addr = msg->rsp[6]; | 
|  | ipmb_addr.channel = msg->rsp[3] & 0x0f; | 
|  | ipmb_addr.lun = msg->rsp[7] & 3; | 
|  |  | 
|  | /* | 
|  | * It's a response from a remote entity.  Look up the sequence | 
|  | * number and handle the response. | 
|  | */ | 
|  | if (intf_find_seq(intf, | 
|  | msg->rsp[7] >> 2, | 
|  | msg->rsp[3] & 0x0f, | 
|  | msg->rsp[8], | 
|  | (msg->rsp[4] >> 2) & (~1), | 
|  | (struct ipmi_addr *) &(ipmb_addr), | 
|  | &recv_msg)) { | 
|  | /* | 
|  | * We were unable to find the sequence number, | 
|  | * so just nuke the message. | 
|  | */ | 
|  | ipmi_inc_stat(intf, unhandled_ipmb_responses); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | memcpy(recv_msg->msg_data, | 
|  | &(msg->rsp[9]), | 
|  | msg->rsp_size - 9); | 
|  | /* | 
|  | * The other fields matched, so no need to set them, except | 
|  | * for netfn, which needs to be the response that was | 
|  | * returned, not the request value. | 
|  | */ | 
|  | recv_msg->msg.netfn = msg->rsp[4] >> 2; | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  | recv_msg->msg.data_len = msg->rsp_size - 10; | 
|  | recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
|  | ipmi_inc_stat(intf, handled_ipmb_responses); | 
|  | deliver_response(recv_msg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int handle_ipmb_get_msg_cmd(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | struct cmd_rcvr          *rcvr; | 
|  | int                      rv = 0; | 
|  | unsigned char            netfn; | 
|  | unsigned char            cmd; | 
|  | unsigned char            chan; | 
|  | ipmi_user_t              user = NULL; | 
|  | struct ipmi_ipmb_addr    *ipmb_addr; | 
|  | struct ipmi_recv_msg     *recv_msg; | 
|  | struct ipmi_smi_handlers *handlers; | 
|  |  | 
|  | if (msg->rsp_size < 10) { | 
|  | /* Message not big enough, just ignore it. */ | 
|  | ipmi_inc_stat(intf, invalid_commands); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (msg->rsp[2] != 0) { | 
|  | /* An error getting the response, just ignore it. */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | netfn = msg->rsp[4] >> 2; | 
|  | cmd = msg->rsp[8]; | 
|  | chan = msg->rsp[3] & 0xf; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); | 
|  | if (rcvr) { | 
|  | user = rcvr->user; | 
|  | kref_get(&user->refcount); | 
|  | } else | 
|  | user = NULL; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (user == NULL) { | 
|  | /* We didn't find a user, deliver an error response. */ | 
|  | ipmi_inc_stat(intf, unhandled_commands); | 
|  |  | 
|  | msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); | 
|  | msg->data[1] = IPMI_SEND_MSG_CMD; | 
|  | msg->data[2] = msg->rsp[3]; | 
|  | msg->data[3] = msg->rsp[6]; | 
|  | msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3); | 
|  | msg->data[5] = ipmb_checksum(&(msg->data[3]), 2); | 
|  | msg->data[6] = intf->channels[msg->rsp[3] & 0xf].address; | 
|  | /* rqseq/lun */ | 
|  | msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3); | 
|  | msg->data[8] = msg->rsp[8]; /* cmd */ | 
|  | msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE; | 
|  | msg->data[10] = ipmb_checksum(&(msg->data[6]), 4); | 
|  | msg->data_size = 11; | 
|  |  | 
|  | #ifdef DEBUG_MSGING | 
|  | { | 
|  | int m; | 
|  | printk("Invalid command:"); | 
|  | for (m = 0; m < msg->data_size; m++) | 
|  | printk(" %2.2x", msg->data[m]); | 
|  | printk("\n"); | 
|  | } | 
|  | #endif | 
|  | rcu_read_lock(); | 
|  | handlers = intf->handlers; | 
|  | if (handlers) { | 
|  | handlers->sender(intf->send_info, msg, 0); | 
|  | /* | 
|  | * We used the message, so return the value | 
|  | * that causes it to not be freed or | 
|  | * queued. | 
|  | */ | 
|  | rv = -1; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } else { | 
|  | /* Deliver the message to the user. */ | 
|  | ipmi_inc_stat(intf, handled_commands); | 
|  |  | 
|  | recv_msg = ipmi_alloc_recv_msg(); | 
|  | if (!recv_msg) { | 
|  | /* | 
|  | * We couldn't allocate memory for the | 
|  | * message, so requeue it for handling | 
|  | * later. | 
|  | */ | 
|  | rv = 1; | 
|  | kref_put(&user->refcount, free_user); | 
|  | } else { | 
|  | /* Extract the source address from the data. */ | 
|  | ipmb_addr = (struct ipmi_ipmb_addr *) &recv_msg->addr; | 
|  | ipmb_addr->addr_type = IPMI_IPMB_ADDR_TYPE; | 
|  | ipmb_addr->slave_addr = msg->rsp[6]; | 
|  | ipmb_addr->lun = msg->rsp[7] & 3; | 
|  | ipmb_addr->channel = msg->rsp[3] & 0xf; | 
|  |  | 
|  | /* | 
|  | * Extract the rest of the message information | 
|  | * from the IPMB header. | 
|  | */ | 
|  | recv_msg->user = user; | 
|  | recv_msg->recv_type = IPMI_CMD_RECV_TYPE; | 
|  | recv_msg->msgid = msg->rsp[7] >> 2; | 
|  | recv_msg->msg.netfn = msg->rsp[4] >> 2; | 
|  | recv_msg->msg.cmd = msg->rsp[8]; | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  |  | 
|  | /* | 
|  | * We chop off 10, not 9 bytes because the checksum | 
|  | * at the end also needs to be removed. | 
|  | */ | 
|  | recv_msg->msg.data_len = msg->rsp_size - 10; | 
|  | memcpy(recv_msg->msg_data, | 
|  | &(msg->rsp[9]), | 
|  | msg->rsp_size - 10); | 
|  | deliver_response(recv_msg); | 
|  | } | 
|  | } | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static int handle_lan_get_msg_rsp(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | struct ipmi_lan_addr  lan_addr; | 
|  | struct ipmi_recv_msg  *recv_msg; | 
|  |  | 
|  |  | 
|  | /* | 
|  | * This is 13, not 12, because the response must contain a | 
|  | * completion code. | 
|  | */ | 
|  | if (msg->rsp_size < 13) { | 
|  | /* Message not big enough, just ignore it. */ | 
|  | ipmi_inc_stat(intf, invalid_lan_responses); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (msg->rsp[2] != 0) { | 
|  | /* An error getting the response, just ignore it. */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | lan_addr.addr_type = IPMI_LAN_ADDR_TYPE; | 
|  | lan_addr.session_handle = msg->rsp[4]; | 
|  | lan_addr.remote_SWID = msg->rsp[8]; | 
|  | lan_addr.local_SWID = msg->rsp[5]; | 
|  | lan_addr.channel = msg->rsp[3] & 0x0f; | 
|  | lan_addr.privilege = msg->rsp[3] >> 4; | 
|  | lan_addr.lun = msg->rsp[9] & 3; | 
|  |  | 
|  | /* | 
|  | * It's a response from a remote entity.  Look up the sequence | 
|  | * number and handle the response. | 
|  | */ | 
|  | if (intf_find_seq(intf, | 
|  | msg->rsp[9] >> 2, | 
|  | msg->rsp[3] & 0x0f, | 
|  | msg->rsp[10], | 
|  | (msg->rsp[6] >> 2) & (~1), | 
|  | (struct ipmi_addr *) &(lan_addr), | 
|  | &recv_msg)) { | 
|  | /* | 
|  | * We were unable to find the sequence number, | 
|  | * so just nuke the message. | 
|  | */ | 
|  | ipmi_inc_stat(intf, unhandled_lan_responses); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | memcpy(recv_msg->msg_data, | 
|  | &(msg->rsp[11]), | 
|  | msg->rsp_size - 11); | 
|  | /* | 
|  | * The other fields matched, so no need to set them, except | 
|  | * for netfn, which needs to be the response that was | 
|  | * returned, not the request value. | 
|  | */ | 
|  | recv_msg->msg.netfn = msg->rsp[6] >> 2; | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  | recv_msg->msg.data_len = msg->rsp_size - 12; | 
|  | recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
|  | ipmi_inc_stat(intf, handled_lan_responses); | 
|  | deliver_response(recv_msg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int handle_lan_get_msg_cmd(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | struct cmd_rcvr          *rcvr; | 
|  | int                      rv = 0; | 
|  | unsigned char            netfn; | 
|  | unsigned char            cmd; | 
|  | unsigned char            chan; | 
|  | ipmi_user_t              user = NULL; | 
|  | struct ipmi_lan_addr     *lan_addr; | 
|  | struct ipmi_recv_msg     *recv_msg; | 
|  |  | 
|  | if (msg->rsp_size < 12) { | 
|  | /* Message not big enough, just ignore it. */ | 
|  | ipmi_inc_stat(intf, invalid_commands); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (msg->rsp[2] != 0) { | 
|  | /* An error getting the response, just ignore it. */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | netfn = msg->rsp[6] >> 2; | 
|  | cmd = msg->rsp[10]; | 
|  | chan = msg->rsp[3] & 0xf; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); | 
|  | if (rcvr) { | 
|  | user = rcvr->user; | 
|  | kref_get(&user->refcount); | 
|  | } else | 
|  | user = NULL; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (user == NULL) { | 
|  | /* We didn't find a user, just give up. */ | 
|  | ipmi_inc_stat(intf, unhandled_commands); | 
|  |  | 
|  | /* | 
|  | * Don't do anything with these messages, just allow | 
|  | * them to be freed. | 
|  | */ | 
|  | rv = 0; | 
|  | } else { | 
|  | /* Deliver the message to the user. */ | 
|  | ipmi_inc_stat(intf, handled_commands); | 
|  |  | 
|  | recv_msg = ipmi_alloc_recv_msg(); | 
|  | if (!recv_msg) { | 
|  | /* | 
|  | * We couldn't allocate memory for the | 
|  | * message, so requeue it for handling later. | 
|  | */ | 
|  | rv = 1; | 
|  | kref_put(&user->refcount, free_user); | 
|  | } else { | 
|  | /* Extract the source address from the data. */ | 
|  | lan_addr = (struct ipmi_lan_addr *) &recv_msg->addr; | 
|  | lan_addr->addr_type = IPMI_LAN_ADDR_TYPE; | 
|  | lan_addr->session_handle = msg->rsp[4]; | 
|  | lan_addr->remote_SWID = msg->rsp[8]; | 
|  | lan_addr->local_SWID = msg->rsp[5]; | 
|  | lan_addr->lun = msg->rsp[9] & 3; | 
|  | lan_addr->channel = msg->rsp[3] & 0xf; | 
|  | lan_addr->privilege = msg->rsp[3] >> 4; | 
|  |  | 
|  | /* | 
|  | * Extract the rest of the message information | 
|  | * from the IPMB header. | 
|  | */ | 
|  | recv_msg->user = user; | 
|  | recv_msg->recv_type = IPMI_CMD_RECV_TYPE; | 
|  | recv_msg->msgid = msg->rsp[9] >> 2; | 
|  | recv_msg->msg.netfn = msg->rsp[6] >> 2; | 
|  | recv_msg->msg.cmd = msg->rsp[10]; | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  |  | 
|  | /* | 
|  | * We chop off 12, not 11 bytes because the checksum | 
|  | * at the end also needs to be removed. | 
|  | */ | 
|  | recv_msg->msg.data_len = msg->rsp_size - 12; | 
|  | memcpy(recv_msg->msg_data, | 
|  | &(msg->rsp[11]), | 
|  | msg->rsp_size - 12); | 
|  | deliver_response(recv_msg); | 
|  | } | 
|  | } | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine will handle "Get Message" command responses with | 
|  | * channels that use an OEM Medium. The message format belongs to | 
|  | * the OEM.  See IPMI 2.0 specification, Chapter 6 and | 
|  | * Chapter 22, sections 22.6 and 22.24 for more details. | 
|  | */ | 
|  | static int handle_oem_get_msg_cmd(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | struct cmd_rcvr       *rcvr; | 
|  | int                   rv = 0; | 
|  | unsigned char         netfn; | 
|  | unsigned char         cmd; | 
|  | unsigned char         chan; | 
|  | ipmi_user_t           user = NULL; | 
|  | struct ipmi_system_interface_addr *smi_addr; | 
|  | struct ipmi_recv_msg  *recv_msg; | 
|  |  | 
|  | /* | 
|  | * We expect the OEM SW to perform error checking | 
|  | * so we just do some basic sanity checks | 
|  | */ | 
|  | if (msg->rsp_size < 4) { | 
|  | /* Message not big enough, just ignore it. */ | 
|  | ipmi_inc_stat(intf, invalid_commands); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (msg->rsp[2] != 0) { | 
|  | /* An error getting the response, just ignore it. */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is an OEM Message so the OEM needs to know how | 
|  | * handle the message. We do no interpretation. | 
|  | */ | 
|  | netfn = msg->rsp[0] >> 2; | 
|  | cmd = msg->rsp[1]; | 
|  | chan = msg->rsp[3] & 0xf; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); | 
|  | if (rcvr) { | 
|  | user = rcvr->user; | 
|  | kref_get(&user->refcount); | 
|  | } else | 
|  | user = NULL; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (user == NULL) { | 
|  | /* We didn't find a user, just give up. */ | 
|  | ipmi_inc_stat(intf, unhandled_commands); | 
|  |  | 
|  | /* | 
|  | * Don't do anything with these messages, just allow | 
|  | * them to be freed. | 
|  | */ | 
|  |  | 
|  | rv = 0; | 
|  | } else { | 
|  | /* Deliver the message to the user. */ | 
|  | ipmi_inc_stat(intf, handled_commands); | 
|  |  | 
|  | recv_msg = ipmi_alloc_recv_msg(); | 
|  | if (!recv_msg) { | 
|  | /* | 
|  | * We couldn't allocate memory for the | 
|  | * message, so requeue it for handling | 
|  | * later. | 
|  | */ | 
|  | rv = 1; | 
|  | kref_put(&user->refcount, free_user); | 
|  | } else { | 
|  | /* | 
|  | * OEM Messages are expected to be delivered via | 
|  | * the system interface to SMS software.  We might | 
|  | * need to visit this again depending on OEM | 
|  | * requirements | 
|  | */ | 
|  | smi_addr = ((struct ipmi_system_interface_addr *) | 
|  | &(recv_msg->addr)); | 
|  | smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
|  | smi_addr->channel = IPMI_BMC_CHANNEL; | 
|  | smi_addr->lun = msg->rsp[0] & 3; | 
|  |  | 
|  | recv_msg->user = user; | 
|  | recv_msg->user_msg_data = NULL; | 
|  | recv_msg->recv_type = IPMI_OEM_RECV_TYPE; | 
|  | recv_msg->msg.netfn = msg->rsp[0] >> 2; | 
|  | recv_msg->msg.cmd = msg->rsp[1]; | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  |  | 
|  | /* | 
|  | * The message starts at byte 4 which follows the | 
|  | * the Channel Byte in the "GET MESSAGE" command | 
|  | */ | 
|  | recv_msg->msg.data_len = msg->rsp_size - 4; | 
|  | memcpy(recv_msg->msg_data, | 
|  | &(msg->rsp[4]), | 
|  | msg->rsp_size - 4); | 
|  | deliver_response(recv_msg); | 
|  | } | 
|  | } | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg, | 
|  | struct ipmi_smi_msg  *msg) | 
|  | { | 
|  | struct ipmi_system_interface_addr *smi_addr; | 
|  |  | 
|  | recv_msg->msgid = 0; | 
|  | smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr); | 
|  | smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
|  | smi_addr->channel = IPMI_BMC_CHANNEL; | 
|  | smi_addr->lun = msg->rsp[0] & 3; | 
|  | recv_msg->recv_type = IPMI_ASYNC_EVENT_RECV_TYPE; | 
|  | recv_msg->msg.netfn = msg->rsp[0] >> 2; | 
|  | recv_msg->msg.cmd = msg->rsp[1]; | 
|  | memcpy(recv_msg->msg_data, &(msg->rsp[3]), msg->rsp_size - 3); | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  | recv_msg->msg.data_len = msg->rsp_size - 3; | 
|  | } | 
|  |  | 
|  | static int handle_read_event_rsp(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | struct ipmi_recv_msg *recv_msg, *recv_msg2; | 
|  | struct list_head     msgs; | 
|  | ipmi_user_t          user; | 
|  | int                  rv = 0; | 
|  | int                  deliver_count = 0; | 
|  | unsigned long        flags; | 
|  |  | 
|  | if (msg->rsp_size < 19) { | 
|  | /* Message is too small to be an IPMB event. */ | 
|  | ipmi_inc_stat(intf, invalid_events); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (msg->rsp[2] != 0) { | 
|  | /* An error getting the event, just ignore it. */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&msgs); | 
|  |  | 
|  | spin_lock_irqsave(&intf->events_lock, flags); | 
|  |  | 
|  | ipmi_inc_stat(intf, events); | 
|  |  | 
|  | /* | 
|  | * Allocate and fill in one message for every user that is | 
|  | * getting events. | 
|  | */ | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(user, &intf->users, link) { | 
|  | if (!user->gets_events) | 
|  | continue; | 
|  |  | 
|  | recv_msg = ipmi_alloc_recv_msg(); | 
|  | if (!recv_msg) { | 
|  | rcu_read_unlock(); | 
|  | list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, | 
|  | link) { | 
|  | list_del(&recv_msg->link); | 
|  | ipmi_free_recv_msg(recv_msg); | 
|  | } | 
|  | /* | 
|  | * We couldn't allocate memory for the | 
|  | * message, so requeue it for handling | 
|  | * later. | 
|  | */ | 
|  | rv = 1; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | deliver_count++; | 
|  |  | 
|  | copy_event_into_recv_msg(recv_msg, msg); | 
|  | recv_msg->user = user; | 
|  | kref_get(&user->refcount); | 
|  | list_add_tail(&(recv_msg->link), &msgs); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (deliver_count) { | 
|  | /* Now deliver all the messages. */ | 
|  | list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) { | 
|  | list_del(&recv_msg->link); | 
|  | deliver_response(recv_msg); | 
|  | } | 
|  | } else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) { | 
|  | /* | 
|  | * No one to receive the message, put it in queue if there's | 
|  | * not already too many things in the queue. | 
|  | */ | 
|  | recv_msg = ipmi_alloc_recv_msg(); | 
|  | if (!recv_msg) { | 
|  | /* | 
|  | * We couldn't allocate memory for the | 
|  | * message, so requeue it for handling | 
|  | * later. | 
|  | */ | 
|  | rv = 1; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | copy_event_into_recv_msg(recv_msg, msg); | 
|  | list_add_tail(&(recv_msg->link), &(intf->waiting_events)); | 
|  | intf->waiting_events_count++; | 
|  | } else if (!intf->event_msg_printed) { | 
|  | /* | 
|  | * There's too many things in the queue, discard this | 
|  | * message. | 
|  | */ | 
|  | printk(KERN_WARNING PFX "Event queue full, discarding" | 
|  | " incoming events\n"); | 
|  | intf->event_msg_printed = 1; | 
|  | } | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&(intf->events_lock), flags); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static int handle_bmc_rsp(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | struct ipmi_recv_msg *recv_msg; | 
|  | struct ipmi_user     *user; | 
|  |  | 
|  | recv_msg = (struct ipmi_recv_msg *) msg->user_data; | 
|  | if (recv_msg == NULL) { | 
|  | printk(KERN_WARNING | 
|  | "IPMI message received with no owner. This\n" | 
|  | "could be because of a malformed message, or\n" | 
|  | "because of a hardware error.  Contact your\n" | 
|  | "hardware vender for assistance\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | user = recv_msg->user; | 
|  | /* Make sure the user still exists. */ | 
|  | if (user && !user->valid) { | 
|  | /* The user for the message went away, so give up. */ | 
|  | ipmi_inc_stat(intf, unhandled_local_responses); | 
|  | ipmi_free_recv_msg(recv_msg); | 
|  | } else { | 
|  | struct ipmi_system_interface_addr *smi_addr; | 
|  |  | 
|  | ipmi_inc_stat(intf, handled_local_responses); | 
|  | recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
|  | recv_msg->msgid = msg->msgid; | 
|  | smi_addr = ((struct ipmi_system_interface_addr *) | 
|  | &(recv_msg->addr)); | 
|  | smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
|  | smi_addr->channel = IPMI_BMC_CHANNEL; | 
|  | smi_addr->lun = msg->rsp[0] & 3; | 
|  | recv_msg->msg.netfn = msg->rsp[0] >> 2; | 
|  | recv_msg->msg.cmd = msg->rsp[1]; | 
|  | memcpy(recv_msg->msg_data, | 
|  | &(msg->rsp[2]), | 
|  | msg->rsp_size - 2); | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  | recv_msg->msg.data_len = msg->rsp_size - 2; | 
|  | deliver_response(recv_msg); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle a new message.  Return 1 if the message should be requeued, | 
|  | * 0 if the message should be freed, or -1 if the message should not | 
|  | * be freed or requeued. | 
|  | */ | 
|  | static int handle_new_recv_msg(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | int requeue; | 
|  | int chan; | 
|  |  | 
|  | #ifdef DEBUG_MSGING | 
|  | int m; | 
|  | printk("Recv:"); | 
|  | for (m = 0; m < msg->rsp_size; m++) | 
|  | printk(" %2.2x", msg->rsp[m]); | 
|  | printk("\n"); | 
|  | #endif | 
|  | if (msg->rsp_size < 2) { | 
|  | /* Message is too small to be correct. */ | 
|  | printk(KERN_WARNING PFX "BMC returned to small a message" | 
|  | " for netfn %x cmd %x, got %d bytes\n", | 
|  | (msg->data[0] >> 2) | 1, msg->data[1], msg->rsp_size); | 
|  |  | 
|  | /* Generate an error response for the message. */ | 
|  | msg->rsp[0] = msg->data[0] | (1 << 2); | 
|  | msg->rsp[1] = msg->data[1]; | 
|  | msg->rsp[2] = IPMI_ERR_UNSPECIFIED; | 
|  | msg->rsp_size = 3; | 
|  | } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1)) | 
|  | || (msg->rsp[1] != msg->data[1])) { | 
|  | /* | 
|  | * The NetFN and Command in the response is not even | 
|  | * marginally correct. | 
|  | */ | 
|  | printk(KERN_WARNING PFX "BMC returned incorrect response," | 
|  | " expected netfn %x cmd %x, got netfn %x cmd %x\n", | 
|  | (msg->data[0] >> 2) | 1, msg->data[1], | 
|  | msg->rsp[0] >> 2, msg->rsp[1]); | 
|  |  | 
|  | /* Generate an error response for the message. */ | 
|  | msg->rsp[0] = msg->data[0] | (1 << 2); | 
|  | msg->rsp[1] = msg->data[1]; | 
|  | msg->rsp[2] = IPMI_ERR_UNSPECIFIED; | 
|  | msg->rsp_size = 3; | 
|  | } | 
|  |  | 
|  | if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) | 
|  | && (msg->rsp[1] == IPMI_SEND_MSG_CMD) | 
|  | && (msg->user_data != NULL)) { | 
|  | /* | 
|  | * It's a response to a response we sent.  For this we | 
|  | * deliver a send message response to the user. | 
|  | */ | 
|  | struct ipmi_recv_msg     *recv_msg = msg->user_data; | 
|  |  | 
|  | requeue = 0; | 
|  | if (msg->rsp_size < 2) | 
|  | /* Message is too small to be correct. */ | 
|  | goto out; | 
|  |  | 
|  | chan = msg->data[2] & 0x0f; | 
|  | if (chan >= IPMI_MAX_CHANNELS) | 
|  | /* Invalid channel number */ | 
|  | goto out; | 
|  |  | 
|  | if (!recv_msg) | 
|  | goto out; | 
|  |  | 
|  | /* Make sure the user still exists. */ | 
|  | if (!recv_msg->user || !recv_msg->user->valid) | 
|  | goto out; | 
|  |  | 
|  | recv_msg->recv_type = IPMI_RESPONSE_RESPONSE_TYPE; | 
|  | recv_msg->msg.data = recv_msg->msg_data; | 
|  | recv_msg->msg.data_len = 1; | 
|  | recv_msg->msg_data[0] = msg->rsp[2]; | 
|  | deliver_response(recv_msg); | 
|  | } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) | 
|  | && (msg->rsp[1] == IPMI_GET_MSG_CMD)) { | 
|  | /* It's from the receive queue. */ | 
|  | chan = msg->rsp[3] & 0xf; | 
|  | if (chan >= IPMI_MAX_CHANNELS) { | 
|  | /* Invalid channel number */ | 
|  | requeue = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We need to make sure the channels have been initialized. | 
|  | * The channel_handler routine will set the "curr_channel" | 
|  | * equal to or greater than IPMI_MAX_CHANNELS when all the | 
|  | * channels for this interface have been initialized. | 
|  | */ | 
|  | if (intf->curr_channel < IPMI_MAX_CHANNELS) { | 
|  | requeue = 0; /* Throw the message away */ | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | switch (intf->channels[chan].medium) { | 
|  | case IPMI_CHANNEL_MEDIUM_IPMB: | 
|  | if (msg->rsp[4] & 0x04) { | 
|  | /* | 
|  | * It's a response, so find the | 
|  | * requesting message and send it up. | 
|  | */ | 
|  | requeue = handle_ipmb_get_msg_rsp(intf, msg); | 
|  | } else { | 
|  | /* | 
|  | * It's a command to the SMS from some other | 
|  | * entity.  Handle that. | 
|  | */ | 
|  | requeue = handle_ipmb_get_msg_cmd(intf, msg); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IPMI_CHANNEL_MEDIUM_8023LAN: | 
|  | case IPMI_CHANNEL_MEDIUM_ASYNC: | 
|  | if (msg->rsp[6] & 0x04) { | 
|  | /* | 
|  | * It's a response, so find the | 
|  | * requesting message and send it up. | 
|  | */ | 
|  | requeue = handle_lan_get_msg_rsp(intf, msg); | 
|  | } else { | 
|  | /* | 
|  | * It's a command to the SMS from some other | 
|  | * entity.  Handle that. | 
|  | */ | 
|  | requeue = handle_lan_get_msg_cmd(intf, msg); | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | /* Check for OEM Channels.  Clients had better | 
|  | register for these commands. */ | 
|  | if ((intf->channels[chan].medium | 
|  | >= IPMI_CHANNEL_MEDIUM_OEM_MIN) | 
|  | && (intf->channels[chan].medium | 
|  | <= IPMI_CHANNEL_MEDIUM_OEM_MAX)) { | 
|  | requeue = handle_oem_get_msg_cmd(intf, msg); | 
|  | } else { | 
|  | /* | 
|  | * We don't handle the channel type, so just | 
|  | * free the message. | 
|  | */ | 
|  | requeue = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) | 
|  | && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) { | 
|  | /* It's an asyncronous event. */ | 
|  | requeue = handle_read_event_rsp(intf, msg); | 
|  | } else { | 
|  | /* It's a response from the local BMC. */ | 
|  | requeue = handle_bmc_rsp(intf, msg); | 
|  | } | 
|  |  | 
|  | out: | 
|  | return requeue; | 
|  | } | 
|  |  | 
|  | /* Handle a new message from the lower layer. */ | 
|  | void ipmi_smi_msg_received(ipmi_smi_t          intf, | 
|  | struct ipmi_smi_msg *msg) | 
|  | { | 
|  | unsigned long flags = 0; /* keep us warning-free. */ | 
|  | int           rv; | 
|  | int           run_to_completion; | 
|  |  | 
|  |  | 
|  | if ((msg->data_size >= 2) | 
|  | && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2)) | 
|  | && (msg->data[1] == IPMI_SEND_MSG_CMD) | 
|  | && (msg->user_data == NULL)) { | 
|  | /* | 
|  | * This is the local response to a command send, start | 
|  | * the timer for these.  The user_data will not be | 
|  | * NULL if this is a response send, and we will let | 
|  | * response sends just go through. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Check for errors, if we get certain errors (ones | 
|  | * that mean basically we can try again later), we | 
|  | * ignore them and start the timer.  Otherwise we | 
|  | * report the error immediately. | 
|  | */ | 
|  | if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) | 
|  | && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) | 
|  | && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR) | 
|  | && (msg->rsp[2] != IPMI_BUS_ERR) | 
|  | && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) { | 
|  | int chan = msg->rsp[3] & 0xf; | 
|  |  | 
|  | /* Got an error sending the message, handle it. */ | 
|  | if (chan >= IPMI_MAX_CHANNELS) | 
|  | ; /* This shouldn't happen */ | 
|  | else if ((intf->channels[chan].medium | 
|  | == IPMI_CHANNEL_MEDIUM_8023LAN) | 
|  | || (intf->channels[chan].medium | 
|  | == IPMI_CHANNEL_MEDIUM_ASYNC)) | 
|  | ipmi_inc_stat(intf, sent_lan_command_errs); | 
|  | else | 
|  | ipmi_inc_stat(intf, sent_ipmb_command_errs); | 
|  | intf_err_seq(intf, msg->msgid, msg->rsp[2]); | 
|  | } else | 
|  | /* The message was sent, start the timer. */ | 
|  | intf_start_seq_timer(intf, msg->msgid); | 
|  |  | 
|  | ipmi_free_smi_msg(msg); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * To preserve message order, if the list is not empty, we | 
|  | * tack this message onto the end of the list. | 
|  | */ | 
|  | run_to_completion = intf->run_to_completion; | 
|  | if (!run_to_completion) | 
|  | spin_lock_irqsave(&intf->waiting_msgs_lock, flags); | 
|  | if (!list_empty(&intf->waiting_msgs)) { | 
|  | list_add_tail(&msg->link, &intf->waiting_msgs); | 
|  | if (!run_to_completion) | 
|  | spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); | 
|  | goto out; | 
|  | } | 
|  | if (!run_to_completion) | 
|  | spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); | 
|  |  | 
|  | rv = handle_new_recv_msg(intf, msg); | 
|  | if (rv > 0) { | 
|  | /* | 
|  | * Could not handle the message now, just add it to a | 
|  | * list to handle later. | 
|  | */ | 
|  | run_to_completion = intf->run_to_completion; | 
|  | if (!run_to_completion) | 
|  | spin_lock_irqsave(&intf->waiting_msgs_lock, flags); | 
|  | list_add_tail(&msg->link, &intf->waiting_msgs); | 
|  | if (!run_to_completion) | 
|  | spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); | 
|  | } else if (rv == 0) { | 
|  | ipmi_free_smi_msg(msg); | 
|  | } | 
|  |  | 
|  | out: | 
|  | return; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_smi_msg_received); | 
|  |  | 
|  | void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf) | 
|  | { | 
|  | ipmi_user_t user; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(user, &intf->users, link) { | 
|  | if (!user->handler->ipmi_watchdog_pretimeout) | 
|  | continue; | 
|  |  | 
|  | user->handler->ipmi_watchdog_pretimeout(user->handler_data); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout); | 
|  |  | 
|  | static struct ipmi_smi_msg * | 
|  | smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, | 
|  | unsigned char seq, long seqid) | 
|  | { | 
|  | struct ipmi_smi_msg *smi_msg = ipmi_alloc_smi_msg(); | 
|  | if (!smi_msg) | 
|  | /* | 
|  | * If we can't allocate the message, then just return, we | 
|  | * get 4 retries, so this should be ok. | 
|  | */ | 
|  | return NULL; | 
|  |  | 
|  | memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len); | 
|  | smi_msg->data_size = recv_msg->msg.data_len; | 
|  | smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid); | 
|  |  | 
|  | #ifdef DEBUG_MSGING | 
|  | { | 
|  | int m; | 
|  | printk("Resend: "); | 
|  | for (m = 0; m < smi_msg->data_size; m++) | 
|  | printk(" %2.2x", smi_msg->data[m]); | 
|  | printk("\n"); | 
|  | } | 
|  | #endif | 
|  | return smi_msg; | 
|  | } | 
|  |  | 
|  | static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, | 
|  | struct list_head *timeouts, long timeout_period, | 
|  | int slot, unsigned long *flags) | 
|  | { | 
|  | struct ipmi_recv_msg     *msg; | 
|  | struct ipmi_smi_handlers *handlers; | 
|  |  | 
|  | if (intf->intf_num == -1) | 
|  | return; | 
|  |  | 
|  | if (!ent->inuse) | 
|  | return; | 
|  |  | 
|  | ent->timeout -= timeout_period; | 
|  | if (ent->timeout > 0) | 
|  | return; | 
|  |  | 
|  | if (ent->retries_left == 0) { | 
|  | /* The message has used all its retries. */ | 
|  | ent->inuse = 0; | 
|  | msg = ent->recv_msg; | 
|  | list_add_tail(&msg->link, timeouts); | 
|  | if (ent->broadcast) | 
|  | ipmi_inc_stat(intf, timed_out_ipmb_broadcasts); | 
|  | else if (is_lan_addr(&ent->recv_msg->addr)) | 
|  | ipmi_inc_stat(intf, timed_out_lan_commands); | 
|  | else | 
|  | ipmi_inc_stat(intf, timed_out_ipmb_commands); | 
|  | } else { | 
|  | struct ipmi_smi_msg *smi_msg; | 
|  | /* More retries, send again. */ | 
|  |  | 
|  | /* | 
|  | * Start with the max timer, set to normal timer after | 
|  | * the message is sent. | 
|  | */ | 
|  | ent->timeout = MAX_MSG_TIMEOUT; | 
|  | ent->retries_left--; | 
|  | smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot, | 
|  | ent->seqid); | 
|  | if (!smi_msg) { | 
|  | if (is_lan_addr(&ent->recv_msg->addr)) | 
|  | ipmi_inc_stat(intf, | 
|  | dropped_rexmit_lan_commands); | 
|  | else | 
|  | ipmi_inc_stat(intf, | 
|  | dropped_rexmit_ipmb_commands); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&intf->seq_lock, *flags); | 
|  |  | 
|  | /* | 
|  | * Send the new message.  We send with a zero | 
|  | * priority.  It timed out, I doubt time is that | 
|  | * critical now, and high priority messages are really | 
|  | * only for messages to the local MC, which don't get | 
|  | * resent. | 
|  | */ | 
|  | handlers = intf->handlers; | 
|  | if (handlers) { | 
|  | if (is_lan_addr(&ent->recv_msg->addr)) | 
|  | ipmi_inc_stat(intf, | 
|  | retransmitted_lan_commands); | 
|  | else | 
|  | ipmi_inc_stat(intf, | 
|  | retransmitted_ipmb_commands); | 
|  |  | 
|  | intf->handlers->sender(intf->send_info, | 
|  | smi_msg, 0); | 
|  | } else | 
|  | ipmi_free_smi_msg(smi_msg); | 
|  |  | 
|  | spin_lock_irqsave(&intf->seq_lock, *flags); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ipmi_timeout_handler(long timeout_period) | 
|  | { | 
|  | ipmi_smi_t           intf; | 
|  | struct list_head     timeouts; | 
|  | struct ipmi_recv_msg *msg, *msg2; | 
|  | struct ipmi_smi_msg  *smi_msg, *smi_msg2; | 
|  | unsigned long        flags; | 
|  | int                  i; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { | 
|  | /* See if any waiting messages need to be processed. */ | 
|  | spin_lock_irqsave(&intf->waiting_msgs_lock, flags); | 
|  | list_for_each_entry_safe(smi_msg, smi_msg2, | 
|  | &intf->waiting_msgs, link) { | 
|  | if (!handle_new_recv_msg(intf, smi_msg)) { | 
|  | list_del(&smi_msg->link); | 
|  | ipmi_free_smi_msg(smi_msg); | 
|  | } else { | 
|  | /* | 
|  | * To preserve message order, quit if we | 
|  | * can't handle a message. | 
|  | */ | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); | 
|  |  | 
|  | /* | 
|  | * Go through the seq table and find any messages that | 
|  | * have timed out, putting them in the timeouts | 
|  | * list. | 
|  | */ | 
|  | INIT_LIST_HEAD(&timeouts); | 
|  | spin_lock_irqsave(&intf->seq_lock, flags); | 
|  | for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) | 
|  | check_msg_timeout(intf, &(intf->seq_table[i]), | 
|  | &timeouts, timeout_period, i, | 
|  | &flags); | 
|  | spin_unlock_irqrestore(&intf->seq_lock, flags); | 
|  |  | 
|  | list_for_each_entry_safe(msg, msg2, &timeouts, link) | 
|  | deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE); | 
|  |  | 
|  | /* | 
|  | * Maintenance mode handling.  Check the timeout | 
|  | * optimistically before we claim the lock.  It may | 
|  | * mean a timeout gets missed occasionally, but that | 
|  | * only means the timeout gets extended by one period | 
|  | * in that case.  No big deal, and it avoids the lock | 
|  | * most of the time. | 
|  | */ | 
|  | if (intf->auto_maintenance_timeout > 0) { | 
|  | spin_lock_irqsave(&intf->maintenance_mode_lock, flags); | 
|  | if (intf->auto_maintenance_timeout > 0) { | 
|  | intf->auto_maintenance_timeout | 
|  | -= timeout_period; | 
|  | if (!intf->maintenance_mode | 
|  | && (intf->auto_maintenance_timeout <= 0)) { | 
|  | intf->maintenance_mode_enable = 0; | 
|  | maintenance_mode_update(intf); | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&intf->maintenance_mode_lock, | 
|  | flags); | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void ipmi_request_event(void) | 
|  | { | 
|  | ipmi_smi_t               intf; | 
|  | struct ipmi_smi_handlers *handlers; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | /* | 
|  | * Called from the timer, no need to check if handlers is | 
|  | * valid. | 
|  | */ | 
|  | list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { | 
|  | /* No event requests when in maintenance mode. */ | 
|  | if (intf->maintenance_mode_enable) | 
|  | continue; | 
|  |  | 
|  | handlers = intf->handlers; | 
|  | if (handlers) | 
|  | handlers->request_events(intf->send_info); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static struct timer_list ipmi_timer; | 
|  |  | 
|  | /* Call every ~1000 ms. */ | 
|  | #define IPMI_TIMEOUT_TIME	1000 | 
|  |  | 
|  | /* How many jiffies does it take to get to the timeout time. */ | 
|  | #define IPMI_TIMEOUT_JIFFIES	((IPMI_TIMEOUT_TIME * HZ) / 1000) | 
|  |  | 
|  | /* | 
|  | * Request events from the queue every second (this is the number of | 
|  | * IPMI_TIMEOUT_TIMES between event requests).  Hopefully, in the | 
|  | * future, IPMI will add a way to know immediately if an event is in | 
|  | * the queue and this silliness can go away. | 
|  | */ | 
|  | #define IPMI_REQUEST_EV_TIME	(1000 / (IPMI_TIMEOUT_TIME)) | 
|  |  | 
|  | static atomic_t stop_operation; | 
|  | static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME; | 
|  |  | 
|  | static void ipmi_timeout(unsigned long data) | 
|  | { | 
|  | if (atomic_read(&stop_operation)) | 
|  | return; | 
|  |  | 
|  | ticks_to_req_ev--; | 
|  | if (ticks_to_req_ev == 0) { | 
|  | ipmi_request_event(); | 
|  | ticks_to_req_ev = IPMI_REQUEST_EV_TIME; | 
|  | } | 
|  |  | 
|  | ipmi_timeout_handler(IPMI_TIMEOUT_TIME); | 
|  |  | 
|  | mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); | 
|  | } | 
|  |  | 
|  |  | 
|  | static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0); | 
|  | static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0); | 
|  |  | 
|  | /* FIXME - convert these to slabs. */ | 
|  | static void free_smi_msg(struct ipmi_smi_msg *msg) | 
|  | { | 
|  | atomic_dec(&smi_msg_inuse_count); | 
|  | kfree(msg); | 
|  | } | 
|  |  | 
|  | struct ipmi_smi_msg *ipmi_alloc_smi_msg(void) | 
|  | { | 
|  | struct ipmi_smi_msg *rv; | 
|  | rv = kmalloc(sizeof(struct ipmi_smi_msg), GFP_ATOMIC); | 
|  | if (rv) { | 
|  | rv->done = free_smi_msg; | 
|  | rv->user_data = NULL; | 
|  | atomic_inc(&smi_msg_inuse_count); | 
|  | } | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_alloc_smi_msg); | 
|  |  | 
|  | static void free_recv_msg(struct ipmi_recv_msg *msg) | 
|  | { | 
|  | atomic_dec(&recv_msg_inuse_count); | 
|  | kfree(msg); | 
|  | } | 
|  |  | 
|  | static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void) | 
|  | { | 
|  | struct ipmi_recv_msg *rv; | 
|  |  | 
|  | rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC); | 
|  | if (rv) { | 
|  | rv->user = NULL; | 
|  | rv->done = free_recv_msg; | 
|  | atomic_inc(&recv_msg_inuse_count); | 
|  | } | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | void ipmi_free_recv_msg(struct ipmi_recv_msg *msg) | 
|  | { | 
|  | if (msg->user) | 
|  | kref_put(&msg->user->refcount, free_user); | 
|  | msg->done(msg); | 
|  | } | 
|  | EXPORT_SYMBOL(ipmi_free_recv_msg); | 
|  |  | 
|  | #ifdef CONFIG_IPMI_PANIC_EVENT | 
|  |  | 
|  | static void dummy_smi_done_handler(struct ipmi_smi_msg *msg) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void dummy_recv_done_handler(struct ipmi_recv_msg *msg) | 
|  | { | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IPMI_PANIC_STRING | 
|  | static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) | 
|  | { | 
|  | if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
|  | && (msg->msg.netfn == IPMI_NETFN_SENSOR_EVENT_RESPONSE) | 
|  | && (msg->msg.cmd == IPMI_GET_EVENT_RECEIVER_CMD) | 
|  | && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) { | 
|  | /* A get event receiver command, save it. */ | 
|  | intf->event_receiver = msg->msg.data[1]; | 
|  | intf->event_receiver_lun = msg->msg.data[2] & 0x3; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) | 
|  | { | 
|  | if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
|  | && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) | 
|  | && (msg->msg.cmd == IPMI_GET_DEVICE_ID_CMD) | 
|  | && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) { | 
|  | /* | 
|  | * A get device id command, save if we are an event | 
|  | * receiver or generator. | 
|  | */ | 
|  | intf->local_sel_device = (msg->msg.data[6] >> 2) & 1; | 
|  | intf->local_event_generator = (msg->msg.data[6] >> 5) & 1; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void send_panic_events(char *str) | 
|  | { | 
|  | struct kernel_ipmi_msg            msg; | 
|  | ipmi_smi_t                        intf; | 
|  | unsigned char                     data[16]; | 
|  | struct ipmi_system_interface_addr *si; | 
|  | struct ipmi_addr                  addr; | 
|  | struct ipmi_smi_msg               smi_msg; | 
|  | struct ipmi_recv_msg              recv_msg; | 
|  |  | 
|  | si = (struct ipmi_system_interface_addr *) &addr; | 
|  | si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
|  | si->channel = IPMI_BMC_CHANNEL; | 
|  | si->lun = 0; | 
|  |  | 
|  | /* Fill in an event telling that we have failed. */ | 
|  | msg.netfn = 0x04; /* Sensor or Event. */ | 
|  | msg.cmd = 2; /* Platform event command. */ | 
|  | msg.data = data; | 
|  | msg.data_len = 8; | 
|  | data[0] = 0x41; /* Kernel generator ID, IPMI table 5-4 */ | 
|  | data[1] = 0x03; /* This is for IPMI 1.0. */ | 
|  | data[2] = 0x20; /* OS Critical Stop, IPMI table 36-3 */ | 
|  | data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */ | 
|  | data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */ | 
|  |  | 
|  | /* | 
|  | * Put a few breadcrumbs in.  Hopefully later we can add more things | 
|  | * to make the panic events more useful. | 
|  | */ | 
|  | if (str) { | 
|  | data[3] = str[0]; | 
|  | data[6] = str[1]; | 
|  | data[7] = str[2]; | 
|  | } | 
|  |  | 
|  | smi_msg.done = dummy_smi_done_handler; | 
|  | recv_msg.done = dummy_recv_done_handler; | 
|  |  | 
|  | /* For every registered interface, send the event. */ | 
|  | list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { | 
|  | if (!intf->handlers) | 
|  | /* Interface is not ready. */ | 
|  | continue; | 
|  |  | 
|  | intf->run_to_completion = 1; | 
|  | /* Send the event announcing the panic. */ | 
|  | intf->handlers->set_run_to_completion(intf->send_info, 1); | 
|  | i_ipmi_request(NULL, | 
|  | intf, | 
|  | &addr, | 
|  | 0, | 
|  | &msg, | 
|  | intf, | 
|  | &smi_msg, | 
|  | &recv_msg, | 
|  | 0, | 
|  | intf->channels[0].address, | 
|  | intf->channels[0].lun, | 
|  | 0, 1); /* Don't retry, and don't wait. */ | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IPMI_PANIC_STRING | 
|  | /* | 
|  | * On every interface, dump a bunch of OEM event holding the | 
|  | * string. | 
|  | */ | 
|  | if (!str) | 
|  | return; | 
|  |  | 
|  | /* For every registered interface, send the event. */ | 
|  | list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { | 
|  | char                  *p = str; | 
|  | struct ipmi_ipmb_addr *ipmb; | 
|  | int                   j; | 
|  |  | 
|  | if (intf->intf_num == -1) | 
|  | /* Interface was not ready yet. */ | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * intf_num is used as an marker to tell if the | 
|  | * interface is valid.  Thus we need a read barrier to | 
|  | * make sure data fetched before checking intf_num | 
|  | * won't be used. | 
|  | */ | 
|  | smp_rmb(); | 
|  |  | 
|  | /* | 
|  | * First job here is to figure out where to send the | 
|  | * OEM events.  There's no way in IPMI to send OEM | 
|  | * events using an event send command, so we have to | 
|  | * find the SEL to put them in and stick them in | 
|  | * there. | 
|  | */ | 
|  |  | 
|  | /* Get capabilities from the get device id. */ | 
|  | intf->local_sel_device = 0; | 
|  | intf->local_event_generator = 0; | 
|  | intf->event_receiver = 0; | 
|  |  | 
|  | /* Request the device info from the local MC. */ | 
|  | msg.netfn = IPMI_NETFN_APP_REQUEST; | 
|  | msg.cmd = IPMI_GET_DEVICE_ID_CMD; | 
|  | msg.data = NULL; | 
|  | msg.data_len = 0; | 
|  | intf->null_user_handler = device_id_fetcher; | 
|  | i_ipmi_request(NULL, | 
|  | intf, | 
|  | &addr, | 
|  | 0, | 
|  | &msg, | 
|  | intf, | 
|  | &smi_msg, | 
|  | &recv_msg, | 
|  | 0, | 
|  | intf->channels[0].address, | 
|  | intf->channels[0].lun, | 
|  | 0, 1); /* Don't retry, and don't wait. */ | 
|  |  | 
|  | if (intf->local_event_generator) { | 
|  | /* Request the event receiver from the local MC. */ | 
|  | msg.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST; | 
|  | msg.cmd = IPMI_GET_EVENT_RECEIVER_CMD; | 
|  | msg.data = NULL; | 
|  | msg.data_len = 0; | 
|  | intf->null_user_handler = event_receiver_fetcher; | 
|  | i_ipmi_request(NULL, | 
|  | intf, | 
|  | &addr, | 
|  | 0, | 
|  | &msg, | 
|  | intf, | 
|  | &smi_msg, | 
|  | &recv_msg, | 
|  | 0, | 
|  | intf->channels[0].address, | 
|  | intf->channels[0].lun, | 
|  | 0, 1); /* no retry, and no wait. */ | 
|  | } | 
|  | intf->null_user_handler = NULL; | 
|  |  | 
|  | /* | 
|  | * Validate the event receiver.  The low bit must not | 
|  | * be 1 (it must be a valid IPMB address), it cannot | 
|  | * be zero, and it must not be my address. | 
|  | */ | 
|  | if (((intf->event_receiver & 1) == 0) | 
|  | && (intf->event_receiver != 0) | 
|  | && (intf->event_receiver != intf->channels[0].address)) { | 
|  | /* | 
|  | * The event receiver is valid, send an IPMB | 
|  | * message. | 
|  | */ | 
|  | ipmb = (struct ipmi_ipmb_addr *) &addr; | 
|  | ipmb->addr_type = IPMI_IPMB_ADDR_TYPE; | 
|  | ipmb->channel = 0; /* FIXME - is this right? */ | 
|  | ipmb->lun = intf->event_receiver_lun; | 
|  | ipmb->slave_addr = intf->event_receiver; | 
|  | } else if (intf->local_sel_device) { | 
|  | /* | 
|  | * The event receiver was not valid (or was | 
|  | * me), but I am an SEL device, just dump it | 
|  | * in my SEL. | 
|  | */ | 
|  | si = (struct ipmi_system_interface_addr *) &addr; | 
|  | si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
|  | si->channel = IPMI_BMC_CHANNEL; | 
|  | si->lun = 0; | 
|  | } else | 
|  | continue; /* No where to send the event. */ | 
|  |  | 
|  | msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */ | 
|  | msg.cmd = IPMI_ADD_SEL_ENTRY_CMD; | 
|  | msg.data = data; | 
|  | msg.data_len = 16; | 
|  |  | 
|  | j = 0; | 
|  | while (*p) { | 
|  | int size = strlen(p); | 
|  |  | 
|  | if (size > 11) | 
|  | size = 11; | 
|  | data[0] = 0; | 
|  | data[1] = 0; | 
|  | data[2] = 0xf0; /* OEM event without timestamp. */ | 
|  | data[3] = intf->channels[0].address; | 
|  | data[4] = j++; /* sequence # */ | 
|  | /* | 
|  | * Always give 11 bytes, so strncpy will fill | 
|  | * it with zeroes for me. | 
|  | */ | 
|  | strncpy(data+5, p, 11); | 
|  | p += size; | 
|  |  | 
|  | i_ipmi_request(NULL, | 
|  | intf, | 
|  | &addr, | 
|  | 0, | 
|  | &msg, | 
|  | intf, | 
|  | &smi_msg, | 
|  | &recv_msg, | 
|  | 0, | 
|  | intf->channels[0].address, | 
|  | intf->channels[0].lun, | 
|  | 0, 1); /* no retry, and no wait. */ | 
|  | } | 
|  | } | 
|  | #endif /* CONFIG_IPMI_PANIC_STRING */ | 
|  | } | 
|  | #endif /* CONFIG_IPMI_PANIC_EVENT */ | 
|  |  | 
|  | static int has_panicked; | 
|  |  | 
|  | static int panic_event(struct notifier_block *this, | 
|  | unsigned long         event, | 
|  | void                  *ptr) | 
|  | { | 
|  | ipmi_smi_t intf; | 
|  |  | 
|  | if (has_panicked) | 
|  | return NOTIFY_DONE; | 
|  | has_panicked = 1; | 
|  |  | 
|  | /* For every registered interface, set it to run to completion. */ | 
|  | list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { | 
|  | if (!intf->handlers) | 
|  | /* Interface is not ready. */ | 
|  | continue; | 
|  |  | 
|  | intf->run_to_completion = 1; | 
|  | intf->handlers->set_run_to_completion(intf->send_info, 1); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IPMI_PANIC_EVENT | 
|  | send_panic_events(ptr); | 
|  | #endif | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static struct notifier_block panic_block = { | 
|  | .notifier_call	= panic_event, | 
|  | .next		= NULL, | 
|  | .priority	= 200	/* priority: INT_MAX >= x >= 0 */ | 
|  | }; | 
|  |  | 
|  | static int ipmi_init_msghandler(void) | 
|  | { | 
|  | int rv; | 
|  |  | 
|  | if (initialized) | 
|  | return 0; | 
|  |  | 
|  | rv = driver_register(&ipmidriver.driver); | 
|  | if (rv) { | 
|  | printk(KERN_ERR PFX "Could not register IPMI driver\n"); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "ipmi message handler version " | 
|  | IPMI_DRIVER_VERSION "\n"); | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | proc_ipmi_root = proc_mkdir("ipmi", NULL); | 
|  | if (!proc_ipmi_root) { | 
|  | printk(KERN_ERR PFX "Unable to create IPMI proc dir"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_PROC_FS */ | 
|  |  | 
|  | setup_timer(&ipmi_timer, ipmi_timeout, 0); | 
|  | mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); | 
|  |  | 
|  | atomic_notifier_chain_register(&panic_notifier_list, &panic_block); | 
|  |  | 
|  | initialized = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init ipmi_init_msghandler_mod(void) | 
|  | { | 
|  | ipmi_init_msghandler(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit cleanup_ipmi(void) | 
|  | { | 
|  | int count; | 
|  |  | 
|  | if (!initialized) | 
|  | return; | 
|  |  | 
|  | atomic_notifier_chain_unregister(&panic_notifier_list, &panic_block); | 
|  |  | 
|  | /* | 
|  | * This can't be called if any interfaces exist, so no worry | 
|  | * about shutting down the interfaces. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Tell the timer to stop, then wait for it to stop.  This | 
|  | * avoids problems with race conditions removing the timer | 
|  | * here. | 
|  | */ | 
|  | atomic_inc(&stop_operation); | 
|  | del_timer_sync(&ipmi_timer); | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | remove_proc_entry(proc_ipmi_root->name, NULL); | 
|  | #endif /* CONFIG_PROC_FS */ | 
|  |  | 
|  | driver_unregister(&ipmidriver.driver); | 
|  |  | 
|  | initialized = 0; | 
|  |  | 
|  | /* Check for buffer leaks. */ | 
|  | count = atomic_read(&smi_msg_inuse_count); | 
|  | if (count != 0) | 
|  | printk(KERN_WARNING PFX "SMI message count %d at exit\n", | 
|  | count); | 
|  | count = atomic_read(&recv_msg_inuse_count); | 
|  | if (count != 0) | 
|  | printk(KERN_WARNING PFX "recv message count %d at exit\n", | 
|  | count); | 
|  | } | 
|  | module_exit(cleanup_ipmi); | 
|  |  | 
|  | module_init(ipmi_init_msghandler_mod); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); | 
|  | MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI" | 
|  | " interface."); | 
|  | MODULE_VERSION(IPMI_DRIVER_VERSION); |