| /* | 
 |  * arch/arm/mach-at91/at91cap9.c | 
 |  * | 
 |  *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> | 
 |  *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> | 
 |  *  Copyright (C) 2007 Atmel Corporation. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/pm.h> | 
 |  | 
 | #include <asm/irq.h> | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/mach/map.h> | 
 |  | 
 | #include <mach/cpu.h> | 
 | #include <mach/at91cap9.h> | 
 | #include <mach/at91_pmc.h> | 
 | #include <mach/at91_rstc.h> | 
 | #include <mach/at91_shdwc.h> | 
 |  | 
 | #include "generic.h" | 
 | #include "clock.h" | 
 |  | 
 | static struct map_desc at91cap9_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= AT91_VA_BASE_SYS, | 
 | 		.pfn		= __phys_to_pfn(AT91_BASE_SYS), | 
 | 		.length		= SZ_16K, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, { | 
 | 		.virtual	= AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, | 
 | 		.pfn		= __phys_to_pfn(AT91CAP9_SRAM_BASE), | 
 | 		.length		= AT91CAP9_SRAM_SIZE, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  Clocks | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * The peripheral clocks. | 
 |  */ | 
 | static struct clk pioABCD_clk = { | 
 | 	.name		= "pioABCD_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_PIOABCD, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mpb0_clk = { | 
 | 	.name		= "mpb0_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_MPB0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mpb1_clk = { | 
 | 	.name		= "mpb1_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_MPB1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mpb2_clk = { | 
 | 	.name		= "mpb2_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_MPB2, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mpb3_clk = { | 
 | 	.name		= "mpb3_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_MPB3, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mpb4_clk = { | 
 | 	.name		= "mpb4_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_MPB4, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart0_clk = { | 
 | 	.name		= "usart0_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_US0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart1_clk = { | 
 | 	.name		= "usart1_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_US1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart2_clk = { | 
 | 	.name		= "usart2_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_US2, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mmc0_clk = { | 
 | 	.name		= "mci0_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_MCI0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mmc1_clk = { | 
 | 	.name		= "mci1_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_MCI1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk can_clk = { | 
 | 	.name		= "can_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_CAN, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk twi_clk = { | 
 | 	.name		= "twi_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_TWI, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk spi0_clk = { | 
 | 	.name		= "spi0_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_SPI0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk spi1_clk = { | 
 | 	.name		= "spi1_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_SPI1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ssc0_clk = { | 
 | 	.name		= "ssc0_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_SSC0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ssc1_clk = { | 
 | 	.name		= "ssc1_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_SSC1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ac97_clk = { | 
 | 	.name		= "ac97_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_AC97C, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tcb_clk = { | 
 | 	.name		= "tcb_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_TCB, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pwm_clk = { | 
 | 	.name		= "pwm_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_PWMC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk macb_clk = { | 
 | 	.name		= "macb_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_EMAC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk aestdes_clk = { | 
 | 	.name		= "aestdes_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_AESTDES, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk adc_clk = { | 
 | 	.name		= "adc_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_ADC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk isi_clk = { | 
 | 	.name		= "isi_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_ISI, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk lcdc_clk = { | 
 | 	.name		= "lcdc_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_LCDC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk dma_clk = { | 
 | 	.name		= "dma_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_DMA, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk udphs_clk = { | 
 | 	.name		= "udphs_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_UDPHS, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ohci_clk = { | 
 | 	.name		= "ohci_clk", | 
 | 	.pmc_mask	= 1 << AT91CAP9_ID_UHP, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 |  | 
 | static struct clk *periph_clocks[] __initdata = { | 
 | 	&pioABCD_clk, | 
 | 	&mpb0_clk, | 
 | 	&mpb1_clk, | 
 | 	&mpb2_clk, | 
 | 	&mpb3_clk, | 
 | 	&mpb4_clk, | 
 | 	&usart0_clk, | 
 | 	&usart1_clk, | 
 | 	&usart2_clk, | 
 | 	&mmc0_clk, | 
 | 	&mmc1_clk, | 
 | 	&can_clk, | 
 | 	&twi_clk, | 
 | 	&spi0_clk, | 
 | 	&spi1_clk, | 
 | 	&ssc0_clk, | 
 | 	&ssc1_clk, | 
 | 	&ac97_clk, | 
 | 	&tcb_clk, | 
 | 	&pwm_clk, | 
 | 	&macb_clk, | 
 | 	&aestdes_clk, | 
 | 	&adc_clk, | 
 | 	&isi_clk, | 
 | 	&lcdc_clk, | 
 | 	&dma_clk, | 
 | 	&udphs_clk, | 
 | 	&ohci_clk, | 
 | 	// irq0 .. irq1 | 
 | }; | 
 |  | 
 | /* | 
 |  * The four programmable clocks. | 
 |  * You must configure pin multiplexing to bring these signals out. | 
 |  */ | 
 | static struct clk pck0 = { | 
 | 	.name		= "pck0", | 
 | 	.pmc_mask	= AT91_PMC_PCK0, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 0, | 
 | }; | 
 | static struct clk pck1 = { | 
 | 	.name		= "pck1", | 
 | 	.pmc_mask	= AT91_PMC_PCK1, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 1, | 
 | }; | 
 | static struct clk pck2 = { | 
 | 	.name		= "pck2", | 
 | 	.pmc_mask	= AT91_PMC_PCK2, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 2, | 
 | }; | 
 | static struct clk pck3 = { | 
 | 	.name		= "pck3", | 
 | 	.pmc_mask	= AT91_PMC_PCK3, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 3, | 
 | }; | 
 |  | 
 | static void __init at91cap9_register_clocks(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) | 
 | 		clk_register(periph_clocks[i]); | 
 |  | 
 | 	clk_register(&pck0); | 
 | 	clk_register(&pck1); | 
 | 	clk_register(&pck2); | 
 | 	clk_register(&pck3); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  GPIO | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | static struct at91_gpio_bank at91cap9_gpio[] = { | 
 | 	{ | 
 | 		.id		= AT91CAP9_ID_PIOABCD, | 
 | 		.offset		= AT91_PIOA, | 
 | 		.clock		= &pioABCD_clk, | 
 | 	}, { | 
 | 		.id		= AT91CAP9_ID_PIOABCD, | 
 | 		.offset		= AT91_PIOB, | 
 | 		.clock		= &pioABCD_clk, | 
 | 	}, { | 
 | 		.id		= AT91CAP9_ID_PIOABCD, | 
 | 		.offset		= AT91_PIOC, | 
 | 		.clock		= &pioABCD_clk, | 
 | 	}, { | 
 | 		.id		= AT91CAP9_ID_PIOABCD, | 
 | 		.offset		= AT91_PIOD, | 
 | 		.clock		= &pioABCD_clk, | 
 | 	} | 
 | }; | 
 |  | 
 | static void at91cap9_reset(void) | 
 | { | 
 | 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); | 
 | } | 
 |  | 
 | static void at91cap9_poweroff(void) | 
 | { | 
 | 	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); | 
 | } | 
 |  | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  AT91CAP9 processor initialization | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | void __init at91cap9_initialize(unsigned long main_clock) | 
 | { | 
 | 	/* Map peripherals */ | 
 | 	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); | 
 |  | 
 | 	at91_arch_reset = at91cap9_reset; | 
 | 	pm_power_off = at91cap9_poweroff; | 
 | 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); | 
 |  | 
 | 	/* Init clock subsystem */ | 
 | 	at91_clock_init(main_clock); | 
 |  | 
 | 	/* Register the processor-specific clocks */ | 
 | 	at91cap9_register_clocks(); | 
 |  | 
 | 	/* Register GPIO subsystem */ | 
 | 	at91_gpio_init(at91cap9_gpio, 4); | 
 |  | 
 | 	/* Remember the silicon revision */ | 
 | 	if (cpu_is_at91cap9_revB()) | 
 | 		system_rev = 0xB; | 
 | 	else if (cpu_is_at91cap9_revC()) | 
 | 		system_rev = 0xC; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  Interrupt initialization | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * The default interrupt priority levels (0 = lowest, 7 = highest). | 
 |  */ | 
 | static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { | 
 | 	7,	/* Advanced Interrupt Controller (FIQ) */ | 
 | 	7,	/* System Peripherals */ | 
 | 	1,	/* Parallel IO Controller A, B, C and D */ | 
 | 	0,	/* MP Block Peripheral 0 */ | 
 | 	0,	/* MP Block Peripheral 1 */ | 
 | 	0,	/* MP Block Peripheral 2 */ | 
 | 	0,	/* MP Block Peripheral 3 */ | 
 | 	0,	/* MP Block Peripheral 4 */ | 
 | 	5,	/* USART 0 */ | 
 | 	5,	/* USART 1 */ | 
 | 	5,	/* USART 2 */ | 
 | 	0,	/* Multimedia Card Interface 0 */ | 
 | 	0,	/* Multimedia Card Interface 1 */ | 
 | 	3,	/* CAN */ | 
 | 	6,	/* Two-Wire Interface */ | 
 | 	5,	/* Serial Peripheral Interface 0 */ | 
 | 	5,	/* Serial Peripheral Interface 1 */ | 
 | 	4,	/* Serial Synchronous Controller 0 */ | 
 | 	4,	/* Serial Synchronous Controller 1 */ | 
 | 	5,	/* AC97 Controller */ | 
 | 	0,	/* Timer Counter 0, 1 and 2 */ | 
 | 	0,	/* Pulse Width Modulation Controller */ | 
 | 	3,	/* Ethernet */ | 
 | 	0,	/* Advanced Encryption Standard, Triple DES*/ | 
 | 	0,	/* Analog-to-Digital Converter */ | 
 | 	0,	/* Image Sensor Interface */ | 
 | 	3,	/* LCD Controller */ | 
 | 	0,	/* DMA Controller */ | 
 | 	2,	/* USB Device Port */ | 
 | 	2,	/* USB Host port */ | 
 | 	0,	/* Advanced Interrupt Controller (IRQ0) */ | 
 | 	0,	/* Advanced Interrupt Controller (IRQ1) */ | 
 | }; | 
 |  | 
 | void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) | 
 | { | 
 | 	if (!priority) | 
 | 		priority = at91cap9_default_irq_priority; | 
 |  | 
 | 	/* Initialize the AIC interrupt controller */ | 
 | 	at91_aic_init(priority); | 
 |  | 
 | 	/* Enable GPIO interrupts */ | 
 | 	at91_gpio_irq_setup(); | 
 | } |