| /* | 
 |  *	Definitions for the 'struct sk_buff' memory handlers. | 
 |  * | 
 |  *	Authors: | 
 |  *		Alan Cox, <gw4pts@gw4pts.ampr.org> | 
 |  *		Florian La Roche, <rzsfl@rz.uni-sb.de> | 
 |  * | 
 |  *	This program is free software; you can redistribute it and/or | 
 |  *	modify it under the terms of the GNU General Public License | 
 |  *	as published by the Free Software Foundation; either version | 
 |  *	2 of the License, or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #ifndef _LINUX_SKBUFF_H | 
 | #define _LINUX_SKBUFF_H | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/compiler.h> | 
 | #include <linux/time.h> | 
 | #include <linux/cache.h> | 
 |  | 
 | #include <asm/atomic.h> | 
 | #include <asm/types.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/highmem.h> | 
 | #include <linux/poll.h> | 
 | #include <linux/net.h> | 
 | #include <linux/textsearch.h> | 
 | #include <net/checksum.h> | 
 | #include <linux/dmaengine.h> | 
 |  | 
 | #define HAVE_ALLOC_SKB		/* For the drivers to know */ | 
 | #define HAVE_ALIGNABLE_SKB	/* Ditto 8)		   */ | 
 |  | 
 | #define CHECKSUM_NONE 0 | 
 | #define CHECKSUM_PARTIAL 1 | 
 | #define CHECKSUM_UNNECESSARY 2 | 
 | #define CHECKSUM_COMPLETE 3 | 
 |  | 
 | #define SKB_DATA_ALIGN(X)	(((X) + (SMP_CACHE_BYTES - 1)) & \ | 
 | 				 ~(SMP_CACHE_BYTES - 1)) | 
 | #define SKB_MAX_ORDER(X, ORDER)	(((PAGE_SIZE << (ORDER)) - (X) - \ | 
 | 				  sizeof(struct skb_shared_info)) & \ | 
 | 				  ~(SMP_CACHE_BYTES - 1)) | 
 | #define SKB_MAX_HEAD(X)		(SKB_MAX_ORDER((X), 0)) | 
 | #define SKB_MAX_ALLOC		(SKB_MAX_ORDER(0, 2)) | 
 |  | 
 | /* A. Checksumming of received packets by device. | 
 |  * | 
 |  *	NONE: device failed to checksum this packet. | 
 |  *		skb->csum is undefined. | 
 |  * | 
 |  *	UNNECESSARY: device parsed packet and wouldbe verified checksum. | 
 |  *		skb->csum is undefined. | 
 |  *	      It is bad option, but, unfortunately, many of vendors do this. | 
 |  *	      Apparently with secret goal to sell you new device, when you | 
 |  *	      will add new protocol to your host. F.e. IPv6. 8) | 
 |  * | 
 |  *	COMPLETE: the most generic way. Device supplied checksum of _all_ | 
 |  *	    the packet as seen by netif_rx in skb->csum. | 
 |  *	    NOTE: Even if device supports only some protocols, but | 
 |  *	    is able to produce some skb->csum, it MUST use COMPLETE, | 
 |  *	    not UNNECESSARY. | 
 |  * | 
 |  * B. Checksumming on output. | 
 |  * | 
 |  *	NONE: skb is checksummed by protocol or csum is not required. | 
 |  * | 
 |  *	PARTIAL: device is required to csum packet as seen by hard_start_xmit | 
 |  *	from skb->h.raw to the end and to record the checksum | 
 |  *	at skb->h.raw+skb->csum. | 
 |  * | 
 |  *	Device must show its capabilities in dev->features, set | 
 |  *	at device setup time. | 
 |  *	NETIF_F_HW_CSUM	- it is clever device, it is able to checksum | 
 |  *			  everything. | 
 |  *	NETIF_F_NO_CSUM - loopback or reliable single hop media. | 
 |  *	NETIF_F_IP_CSUM - device is dumb. It is able to csum only | 
 |  *			  TCP/UDP over IPv4. Sigh. Vendors like this | 
 |  *			  way by an unknown reason. Though, see comment above | 
 |  *			  about CHECKSUM_UNNECESSARY. 8) | 
 |  * | 
 |  *	Any questions? No questions, good. 		--ANK | 
 |  */ | 
 |  | 
 | struct net_device; | 
 |  | 
 | #ifdef CONFIG_NETFILTER | 
 | struct nf_conntrack { | 
 | 	atomic_t use; | 
 | 	void (*destroy)(struct nf_conntrack *); | 
 | }; | 
 |  | 
 | #ifdef CONFIG_BRIDGE_NETFILTER | 
 | struct nf_bridge_info { | 
 | 	atomic_t use; | 
 | 	struct net_device *physindev; | 
 | 	struct net_device *physoutdev; | 
 | #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) | 
 | 	struct net_device *netoutdev; | 
 | #endif | 
 | 	unsigned int mask; | 
 | 	unsigned long data[32 / sizeof(unsigned long)]; | 
 | }; | 
 | #endif | 
 |  | 
 | #endif | 
 |  | 
 | struct sk_buff_head { | 
 | 	/* These two members must be first. */ | 
 | 	struct sk_buff	*next; | 
 | 	struct sk_buff	*prev; | 
 |  | 
 | 	__u32		qlen; | 
 | 	spinlock_t	lock; | 
 | }; | 
 |  | 
 | struct sk_buff; | 
 |  | 
 | /* To allow 64K frame to be packed as single skb without frag_list */ | 
 | #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2) | 
 |  | 
 | typedef struct skb_frag_struct skb_frag_t; | 
 |  | 
 | struct skb_frag_struct { | 
 | 	struct page *page; | 
 | 	__u16 page_offset; | 
 | 	__u16 size; | 
 | }; | 
 |  | 
 | /* This data is invariant across clones and lives at | 
 |  * the end of the header data, ie. at skb->end. | 
 |  */ | 
 | struct skb_shared_info { | 
 | 	atomic_t	dataref; | 
 | 	unsigned short	nr_frags; | 
 | 	unsigned short	gso_size; | 
 | 	/* Warning: this field is not always filled in (UFO)! */ | 
 | 	unsigned short	gso_segs; | 
 | 	unsigned short  gso_type; | 
 | 	unsigned int    ip6_frag_id; | 
 | 	struct sk_buff	*frag_list; | 
 | 	skb_frag_t	frags[MAX_SKB_FRAGS]; | 
 | }; | 
 |  | 
 | /* We divide dataref into two halves.  The higher 16 bits hold references | 
 |  * to the payload part of skb->data.  The lower 16 bits hold references to | 
 |  * the entire skb->data.  It is up to the users of the skb to agree on | 
 |  * where the payload starts. | 
 |  * | 
 |  * All users must obey the rule that the skb->data reference count must be | 
 |  * greater than or equal to the payload reference count. | 
 |  * | 
 |  * Holding a reference to the payload part means that the user does not | 
 |  * care about modifications to the header part of skb->data. | 
 |  */ | 
 | #define SKB_DATAREF_SHIFT 16 | 
 | #define SKB_DATAREF_MASK ((1 << SKB_DATAREF_SHIFT) - 1) | 
 |  | 
 | struct skb_timeval { | 
 | 	u32	off_sec; | 
 | 	u32	off_usec; | 
 | }; | 
 |  | 
 |  | 
 | enum { | 
 | 	SKB_FCLONE_UNAVAILABLE, | 
 | 	SKB_FCLONE_ORIG, | 
 | 	SKB_FCLONE_CLONE, | 
 | }; | 
 |  | 
 | enum { | 
 | 	SKB_GSO_TCPV4 = 1 << 0, | 
 | 	SKB_GSO_UDP = 1 << 1, | 
 |  | 
 | 	/* This indicates the skb is from an untrusted source. */ | 
 | 	SKB_GSO_DODGY = 1 << 2, | 
 |  | 
 | 	/* This indicates the tcp segment has CWR set. */ | 
 | 	SKB_GSO_TCP_ECN = 1 << 3, | 
 |  | 
 | 	SKB_GSO_TCPV6 = 1 << 4, | 
 | }; | 
 |  | 
 | /**  | 
 |  *	struct sk_buff - socket buffer | 
 |  *	@next: Next buffer in list | 
 |  *	@prev: Previous buffer in list | 
 |  *	@sk: Socket we are owned by | 
 |  *	@tstamp: Time we arrived | 
 |  *	@dev: Device we arrived on/are leaving by | 
 |  *	@input_dev: Device we arrived on | 
 |  *	@h: Transport layer header | 
 |  *	@nh: Network layer header | 
 |  *	@mac: Link layer header | 
 |  *	@dst: destination entry | 
 |  *	@sp: the security path, used for xfrm | 
 |  *	@cb: Control buffer. Free for use by every layer. Put private vars here | 
 |  *	@len: Length of actual data | 
 |  *	@data_len: Data length | 
 |  *	@mac_len: Length of link layer header | 
 |  *	@csum: Checksum | 
 |  *	@local_df: allow local fragmentation | 
 |  *	@cloned: Head may be cloned (check refcnt to be sure) | 
 |  *	@nohdr: Payload reference only, must not modify header | 
 |  *	@pkt_type: Packet class | 
 |  *	@fclone: skbuff clone status | 
 |  *	@ip_summed: Driver fed us an IP checksum | 
 |  *	@priority: Packet queueing priority | 
 |  *	@users: User count - see {datagram,tcp}.c | 
 |  *	@protocol: Packet protocol from driver | 
 |  *	@truesize: Buffer size  | 
 |  *	@head: Head of buffer | 
 |  *	@data: Data head pointer | 
 |  *	@tail: Tail pointer | 
 |  *	@end: End pointer | 
 |  *	@destructor: Destruct function | 
 |  *	@nfmark: Can be used for communication between hooks | 
 |  *	@nfct: Associated connection, if any | 
 |  *	@ipvs_property: skbuff is owned by ipvs | 
 |  *	@nfctinfo: Relationship of this skb to the connection | 
 |  *	@nfct_reasm: netfilter conntrack re-assembly pointer | 
 |  *	@nf_bridge: Saved data about a bridged frame - see br_netfilter.c | 
 |  *	@tc_index: Traffic control index | 
 |  *	@tc_verd: traffic control verdict | 
 |  *	@dma_cookie: a cookie to one of several possible DMA operations | 
 |  *		done by skb DMA functions | 
 |  *	@secmark: security marking | 
 |  */ | 
 |  | 
 | struct sk_buff { | 
 | 	/* These two members must be first. */ | 
 | 	struct sk_buff		*next; | 
 | 	struct sk_buff		*prev; | 
 |  | 
 | 	struct sock		*sk; | 
 | 	struct skb_timeval	tstamp; | 
 | 	struct net_device	*dev; | 
 | 	struct net_device	*input_dev; | 
 |  | 
 | 	union { | 
 | 		struct tcphdr	*th; | 
 | 		struct udphdr	*uh; | 
 | 		struct icmphdr	*icmph; | 
 | 		struct igmphdr	*igmph; | 
 | 		struct iphdr	*ipiph; | 
 | 		struct ipv6hdr	*ipv6h; | 
 | 		unsigned char	*raw; | 
 | 	} h; | 
 |  | 
 | 	union { | 
 | 		struct iphdr	*iph; | 
 | 		struct ipv6hdr	*ipv6h; | 
 | 		struct arphdr	*arph; | 
 | 		unsigned char	*raw; | 
 | 	} nh; | 
 |  | 
 | 	union { | 
 | 	  	unsigned char 	*raw; | 
 | 	} mac; | 
 |  | 
 | 	struct  dst_entry	*dst; | 
 | 	struct	sec_path	*sp; | 
 |  | 
 | 	/* | 
 | 	 * This is the control buffer. It is free to use for every | 
 | 	 * layer. Please put your private variables there. If you | 
 | 	 * want to keep them across layers you have to do a skb_clone() | 
 | 	 * first. This is owned by whoever has the skb queued ATM. | 
 | 	 */ | 
 | 	char			cb[48]; | 
 |  | 
 | 	unsigned int		len, | 
 | 				data_len, | 
 | 				mac_len, | 
 | 				csum; | 
 | 	__u32			priority; | 
 | 	__u8			local_df:1, | 
 | 				cloned:1, | 
 | 				ip_summed:2, | 
 | 				nohdr:1, | 
 | 				nfctinfo:3; | 
 | 	__u8			pkt_type:3, | 
 | 				fclone:2, | 
 | 				ipvs_property:1; | 
 | 	__be16			protocol; | 
 |  | 
 | 	void			(*destructor)(struct sk_buff *skb); | 
 | #ifdef CONFIG_NETFILTER | 
 | 	struct nf_conntrack	*nfct; | 
 | #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | 
 | 	struct sk_buff		*nfct_reasm; | 
 | #endif | 
 | #ifdef CONFIG_BRIDGE_NETFILTER | 
 | 	struct nf_bridge_info	*nf_bridge; | 
 | #endif | 
 | 	__u32			nfmark; | 
 | #endif /* CONFIG_NETFILTER */ | 
 | #ifdef CONFIG_NET_SCHED | 
 | 	__u16			tc_index;	/* traffic control index */ | 
 | #ifdef CONFIG_NET_CLS_ACT | 
 | 	__u16			tc_verd;	/* traffic control verdict */ | 
 | #endif | 
 | #endif | 
 | #ifdef CONFIG_NET_DMA | 
 | 	dma_cookie_t		dma_cookie; | 
 | #endif | 
 | #ifdef CONFIG_NETWORK_SECMARK | 
 | 	__u32			secmark; | 
 | #endif | 
 |  | 
 |  | 
 | 	/* These elements must be at the end, see alloc_skb() for details.  */ | 
 | 	unsigned int		truesize; | 
 | 	atomic_t		users; | 
 | 	unsigned char		*head, | 
 | 				*data, | 
 | 				*tail, | 
 | 				*end; | 
 | }; | 
 |  | 
 | #ifdef __KERNEL__ | 
 | /* | 
 |  *	Handling routines are only of interest to the kernel | 
 |  */ | 
 | #include <linux/slab.h> | 
 |  | 
 | #include <asm/system.h> | 
 |  | 
 | extern void kfree_skb(struct sk_buff *skb); | 
 | extern void	       __kfree_skb(struct sk_buff *skb); | 
 | extern struct sk_buff *__alloc_skb(unsigned int size, | 
 | 				   gfp_t priority, int fclone); | 
 | static inline struct sk_buff *alloc_skb(unsigned int size, | 
 | 					gfp_t priority) | 
 | { | 
 | 	return __alloc_skb(size, priority, 0); | 
 | } | 
 |  | 
 | static inline struct sk_buff *alloc_skb_fclone(unsigned int size, | 
 | 					       gfp_t priority) | 
 | { | 
 | 	return __alloc_skb(size, priority, 1); | 
 | } | 
 |  | 
 | extern struct sk_buff *alloc_skb_from_cache(kmem_cache_t *cp, | 
 | 					    unsigned int size, | 
 | 					    gfp_t priority); | 
 | extern void	       kfree_skbmem(struct sk_buff *skb); | 
 | extern struct sk_buff *skb_clone(struct sk_buff *skb, | 
 | 				 gfp_t priority); | 
 | extern struct sk_buff *skb_copy(const struct sk_buff *skb, | 
 | 				gfp_t priority); | 
 | extern struct sk_buff *pskb_copy(struct sk_buff *skb, | 
 | 				 gfp_t gfp_mask); | 
 | extern int	       pskb_expand_head(struct sk_buff *skb, | 
 | 					int nhead, int ntail, | 
 | 					gfp_t gfp_mask); | 
 | extern struct sk_buff *skb_realloc_headroom(struct sk_buff *skb, | 
 | 					    unsigned int headroom); | 
 | extern struct sk_buff *skb_copy_expand(const struct sk_buff *skb, | 
 | 				       int newheadroom, int newtailroom, | 
 | 				       gfp_t priority); | 
 | extern int	       skb_pad(struct sk_buff *skb, int pad); | 
 | #define dev_kfree_skb(a)	kfree_skb(a) | 
 | extern void	      skb_over_panic(struct sk_buff *skb, int len, | 
 | 				     void *here); | 
 | extern void	      skb_under_panic(struct sk_buff *skb, int len, | 
 | 				      void *here); | 
 | extern void	      skb_truesize_bug(struct sk_buff *skb); | 
 |  | 
 | static inline void skb_truesize_check(struct sk_buff *skb) | 
 | { | 
 | 	if (unlikely((int)skb->truesize < sizeof(struct sk_buff) + skb->len)) | 
 | 		skb_truesize_bug(skb); | 
 | } | 
 |  | 
 | extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb, | 
 | 			int getfrag(void *from, char *to, int offset, | 
 | 			int len,int odd, struct sk_buff *skb), | 
 | 			void *from, int length); | 
 |  | 
 | struct skb_seq_state | 
 | { | 
 | 	__u32		lower_offset; | 
 | 	__u32		upper_offset; | 
 | 	__u32		frag_idx; | 
 | 	__u32		stepped_offset; | 
 | 	struct sk_buff	*root_skb; | 
 | 	struct sk_buff	*cur_skb; | 
 | 	__u8		*frag_data; | 
 | }; | 
 |  | 
 | extern void	      skb_prepare_seq_read(struct sk_buff *skb, | 
 | 					   unsigned int from, unsigned int to, | 
 | 					   struct skb_seq_state *st); | 
 | extern unsigned int   skb_seq_read(unsigned int consumed, const u8 **data, | 
 | 				   struct skb_seq_state *st); | 
 | extern void	      skb_abort_seq_read(struct skb_seq_state *st); | 
 |  | 
 | extern unsigned int   skb_find_text(struct sk_buff *skb, unsigned int from, | 
 | 				    unsigned int to, struct ts_config *config, | 
 | 				    struct ts_state *state); | 
 |  | 
 | /* Internal */ | 
 | #define skb_shinfo(SKB)		((struct skb_shared_info *)((SKB)->end)) | 
 |  | 
 | /** | 
 |  *	skb_queue_empty - check if a queue is empty | 
 |  *	@list: queue head | 
 |  * | 
 |  *	Returns true if the queue is empty, false otherwise. | 
 |  */ | 
 | static inline int skb_queue_empty(const struct sk_buff_head *list) | 
 | { | 
 | 	return list->next == (struct sk_buff *)list; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_get - reference buffer | 
 |  *	@skb: buffer to reference | 
 |  * | 
 |  *	Makes another reference to a socket buffer and returns a pointer | 
 |  *	to the buffer. | 
 |  */ | 
 | static inline struct sk_buff *skb_get(struct sk_buff *skb) | 
 | { | 
 | 	atomic_inc(&skb->users); | 
 | 	return skb; | 
 | } | 
 |  | 
 | /* | 
 |  * If users == 1, we are the only owner and are can avoid redundant | 
 |  * atomic change. | 
 |  */ | 
 |  | 
 | /** | 
 |  *	skb_cloned - is the buffer a clone | 
 |  *	@skb: buffer to check | 
 |  * | 
 |  *	Returns true if the buffer was generated with skb_clone() and is | 
 |  *	one of multiple shared copies of the buffer. Cloned buffers are | 
 |  *	shared data so must not be written to under normal circumstances. | 
 |  */ | 
 | static inline int skb_cloned(const struct sk_buff *skb) | 
 | { | 
 | 	return skb->cloned && | 
 | 	       (atomic_read(&skb_shinfo(skb)->dataref) & SKB_DATAREF_MASK) != 1; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_header_cloned - is the header a clone | 
 |  *	@skb: buffer to check | 
 |  * | 
 |  *	Returns true if modifying the header part of the buffer requires | 
 |  *	the data to be copied. | 
 |  */ | 
 | static inline int skb_header_cloned(const struct sk_buff *skb) | 
 | { | 
 | 	int dataref; | 
 |  | 
 | 	if (!skb->cloned) | 
 | 		return 0; | 
 |  | 
 | 	dataref = atomic_read(&skb_shinfo(skb)->dataref); | 
 | 	dataref = (dataref & SKB_DATAREF_MASK) - (dataref >> SKB_DATAREF_SHIFT); | 
 | 	return dataref != 1; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_header_release - release reference to header | 
 |  *	@skb: buffer to operate on | 
 |  * | 
 |  *	Drop a reference to the header part of the buffer.  This is done | 
 |  *	by acquiring a payload reference.  You must not read from the header | 
 |  *	part of skb->data after this. | 
 |  */ | 
 | static inline void skb_header_release(struct sk_buff *skb) | 
 | { | 
 | 	BUG_ON(skb->nohdr); | 
 | 	skb->nohdr = 1; | 
 | 	atomic_add(1 << SKB_DATAREF_SHIFT, &skb_shinfo(skb)->dataref); | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_shared - is the buffer shared | 
 |  *	@skb: buffer to check | 
 |  * | 
 |  *	Returns true if more than one person has a reference to this | 
 |  *	buffer. | 
 |  */ | 
 | static inline int skb_shared(const struct sk_buff *skb) | 
 | { | 
 | 	return atomic_read(&skb->users) != 1; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_share_check - check if buffer is shared and if so clone it | 
 |  *	@skb: buffer to check | 
 |  *	@pri: priority for memory allocation | 
 |  * | 
 |  *	If the buffer is shared the buffer is cloned and the old copy | 
 |  *	drops a reference. A new clone with a single reference is returned. | 
 |  *	If the buffer is not shared the original buffer is returned. When | 
 |  *	being called from interrupt status or with spinlocks held pri must | 
 |  *	be GFP_ATOMIC. | 
 |  * | 
 |  *	NULL is returned on a memory allocation failure. | 
 |  */ | 
 | static inline struct sk_buff *skb_share_check(struct sk_buff *skb, | 
 | 					      gfp_t pri) | 
 | { | 
 | 	might_sleep_if(pri & __GFP_WAIT); | 
 | 	if (skb_shared(skb)) { | 
 | 		struct sk_buff *nskb = skb_clone(skb, pri); | 
 | 		kfree_skb(skb); | 
 | 		skb = nskb; | 
 | 	} | 
 | 	return skb; | 
 | } | 
 |  | 
 | /* | 
 |  *	Copy shared buffers into a new sk_buff. We effectively do COW on | 
 |  *	packets to handle cases where we have a local reader and forward | 
 |  *	and a couple of other messy ones. The normal one is tcpdumping | 
 |  *	a packet thats being forwarded. | 
 |  */ | 
 |  | 
 | /** | 
 |  *	skb_unshare - make a copy of a shared buffer | 
 |  *	@skb: buffer to check | 
 |  *	@pri: priority for memory allocation | 
 |  * | 
 |  *	If the socket buffer is a clone then this function creates a new | 
 |  *	copy of the data, drops a reference count on the old copy and returns | 
 |  *	the new copy with the reference count at 1. If the buffer is not a clone | 
 |  *	the original buffer is returned. When called with a spinlock held or | 
 |  *	from interrupt state @pri must be %GFP_ATOMIC | 
 |  * | 
 |  *	%NULL is returned on a memory allocation failure. | 
 |  */ | 
 | static inline struct sk_buff *skb_unshare(struct sk_buff *skb, | 
 | 					  gfp_t pri) | 
 | { | 
 | 	might_sleep_if(pri & __GFP_WAIT); | 
 | 	if (skb_cloned(skb)) { | 
 | 		struct sk_buff *nskb = skb_copy(skb, pri); | 
 | 		kfree_skb(skb);	/* Free our shared copy */ | 
 | 		skb = nskb; | 
 | 	} | 
 | 	return skb; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_peek | 
 |  *	@list_: list to peek at | 
 |  * | 
 |  *	Peek an &sk_buff. Unlike most other operations you _MUST_ | 
 |  *	be careful with this one. A peek leaves the buffer on the | 
 |  *	list and someone else may run off with it. You must hold | 
 |  *	the appropriate locks or have a private queue to do this. | 
 |  * | 
 |  *	Returns %NULL for an empty list or a pointer to the head element. | 
 |  *	The reference count is not incremented and the reference is therefore | 
 |  *	volatile. Use with caution. | 
 |  */ | 
 | static inline struct sk_buff *skb_peek(struct sk_buff_head *list_) | 
 | { | 
 | 	struct sk_buff *list = ((struct sk_buff *)list_)->next; | 
 | 	if (list == (struct sk_buff *)list_) | 
 | 		list = NULL; | 
 | 	return list; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_peek_tail | 
 |  *	@list_: list to peek at | 
 |  * | 
 |  *	Peek an &sk_buff. Unlike most other operations you _MUST_ | 
 |  *	be careful with this one. A peek leaves the buffer on the | 
 |  *	list and someone else may run off with it. You must hold | 
 |  *	the appropriate locks or have a private queue to do this. | 
 |  * | 
 |  *	Returns %NULL for an empty list or a pointer to the tail element. | 
 |  *	The reference count is not incremented and the reference is therefore | 
 |  *	volatile. Use with caution. | 
 |  */ | 
 | static inline struct sk_buff *skb_peek_tail(struct sk_buff_head *list_) | 
 | { | 
 | 	struct sk_buff *list = ((struct sk_buff *)list_)->prev; | 
 | 	if (list == (struct sk_buff *)list_) | 
 | 		list = NULL; | 
 | 	return list; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_queue_len	- get queue length | 
 |  *	@list_: list to measure | 
 |  * | 
 |  *	Return the length of an &sk_buff queue. | 
 |  */ | 
 | static inline __u32 skb_queue_len(const struct sk_buff_head *list_) | 
 | { | 
 | 	return list_->qlen; | 
 | } | 
 |  | 
 | /* | 
 |  * This function creates a split out lock class for each invocation; | 
 |  * this is needed for now since a whole lot of users of the skb-queue | 
 |  * infrastructure in drivers have different locking usage (in hardirq) | 
 |  * than the networking core (in softirq only). In the long run either the | 
 |  * network layer or drivers should need annotation to consolidate the | 
 |  * main types of usage into 3 classes. | 
 |  */ | 
 | static inline void skb_queue_head_init(struct sk_buff_head *list) | 
 | { | 
 | 	spin_lock_init(&list->lock); | 
 | 	list->prev = list->next = (struct sk_buff *)list; | 
 | 	list->qlen = 0; | 
 | } | 
 |  | 
 | /* | 
 |  *	Insert an sk_buff at the start of a list. | 
 |  * | 
 |  *	The "__skb_xxxx()" functions are the non-atomic ones that | 
 |  *	can only be called with interrupts disabled. | 
 |  */ | 
 |  | 
 | /** | 
 |  *	__skb_queue_after - queue a buffer at the list head | 
 |  *	@list: list to use | 
 |  *	@prev: place after this buffer | 
 |  *	@newsk: buffer to queue | 
 |  * | 
 |  *	Queue a buffer int the middle of a list. This function takes no locks | 
 |  *	and you must therefore hold required locks before calling it. | 
 |  * | 
 |  *	A buffer cannot be placed on two lists at the same time. | 
 |  */ | 
 | static inline void __skb_queue_after(struct sk_buff_head *list, | 
 | 				     struct sk_buff *prev, | 
 | 				     struct sk_buff *newsk) | 
 | { | 
 | 	struct sk_buff *next; | 
 | 	list->qlen++; | 
 |  | 
 | 	next = prev->next; | 
 | 	newsk->next = next; | 
 | 	newsk->prev = prev; | 
 | 	next->prev  = prev->next = newsk; | 
 | } | 
 |  | 
 | /** | 
 |  *	__skb_queue_head - queue a buffer at the list head | 
 |  *	@list: list to use | 
 |  *	@newsk: buffer to queue | 
 |  * | 
 |  *	Queue a buffer at the start of a list. This function takes no locks | 
 |  *	and you must therefore hold required locks before calling it. | 
 |  * | 
 |  *	A buffer cannot be placed on two lists at the same time. | 
 |  */ | 
 | extern void skb_queue_head(struct sk_buff_head *list, struct sk_buff *newsk); | 
 | static inline void __skb_queue_head(struct sk_buff_head *list, | 
 | 				    struct sk_buff *newsk) | 
 | { | 
 | 	__skb_queue_after(list, (struct sk_buff *)list, newsk); | 
 | } | 
 |  | 
 | /** | 
 |  *	__skb_queue_tail - queue a buffer at the list tail | 
 |  *	@list: list to use | 
 |  *	@newsk: buffer to queue | 
 |  * | 
 |  *	Queue a buffer at the end of a list. This function takes no locks | 
 |  *	and you must therefore hold required locks before calling it. | 
 |  * | 
 |  *	A buffer cannot be placed on two lists at the same time. | 
 |  */ | 
 | extern void skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk); | 
 | static inline void __skb_queue_tail(struct sk_buff_head *list, | 
 | 				   struct sk_buff *newsk) | 
 | { | 
 | 	struct sk_buff *prev, *next; | 
 |  | 
 | 	list->qlen++; | 
 | 	next = (struct sk_buff *)list; | 
 | 	prev = next->prev; | 
 | 	newsk->next = next; | 
 | 	newsk->prev = prev; | 
 | 	next->prev  = prev->next = newsk; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  *	__skb_dequeue - remove from the head of the queue | 
 |  *	@list: list to dequeue from | 
 |  * | 
 |  *	Remove the head of the list. This function does not take any locks | 
 |  *	so must be used with appropriate locks held only. The head item is | 
 |  *	returned or %NULL if the list is empty. | 
 |  */ | 
 | extern struct sk_buff *skb_dequeue(struct sk_buff_head *list); | 
 | static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list) | 
 | { | 
 | 	struct sk_buff *next, *prev, *result; | 
 |  | 
 | 	prev = (struct sk_buff *) list; | 
 | 	next = prev->next; | 
 | 	result = NULL; | 
 | 	if (next != prev) { | 
 | 		result	     = next; | 
 | 		next	     = next->next; | 
 | 		list->qlen--; | 
 | 		next->prev   = prev; | 
 | 		prev->next   = next; | 
 | 		result->next = result->prev = NULL; | 
 | 	} | 
 | 	return result; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  *	Insert a packet on a list. | 
 |  */ | 
 | extern void        skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list); | 
 | static inline void __skb_insert(struct sk_buff *newsk, | 
 | 				struct sk_buff *prev, struct sk_buff *next, | 
 | 				struct sk_buff_head *list) | 
 | { | 
 | 	newsk->next = next; | 
 | 	newsk->prev = prev; | 
 | 	next->prev  = prev->next = newsk; | 
 | 	list->qlen++; | 
 | } | 
 |  | 
 | /* | 
 |  *	Place a packet after a given packet in a list. | 
 |  */ | 
 | extern void	   skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list); | 
 | static inline void __skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list) | 
 | { | 
 | 	__skb_insert(newsk, old, old->next, list); | 
 | } | 
 |  | 
 | /* | 
 |  * remove sk_buff from list. _Must_ be called atomically, and with | 
 |  * the list known.. | 
 |  */ | 
 | extern void	   skb_unlink(struct sk_buff *skb, struct sk_buff_head *list); | 
 | static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list) | 
 | { | 
 | 	struct sk_buff *next, *prev; | 
 |  | 
 | 	list->qlen--; | 
 | 	next	   = skb->next; | 
 | 	prev	   = skb->prev; | 
 | 	skb->next  = skb->prev = NULL; | 
 | 	next->prev = prev; | 
 | 	prev->next = next; | 
 | } | 
 |  | 
 |  | 
 | /* XXX: more streamlined implementation */ | 
 |  | 
 | /** | 
 |  *	__skb_dequeue_tail - remove from the tail of the queue | 
 |  *	@list: list to dequeue from | 
 |  * | 
 |  *	Remove the tail of the list. This function does not take any locks | 
 |  *	so must be used with appropriate locks held only. The tail item is | 
 |  *	returned or %NULL if the list is empty. | 
 |  */ | 
 | extern struct sk_buff *skb_dequeue_tail(struct sk_buff_head *list); | 
 | static inline struct sk_buff *__skb_dequeue_tail(struct sk_buff_head *list) | 
 | { | 
 | 	struct sk_buff *skb = skb_peek_tail(list); | 
 | 	if (skb) | 
 | 		__skb_unlink(skb, list); | 
 | 	return skb; | 
 | } | 
 |  | 
 |  | 
 | static inline int skb_is_nonlinear(const struct sk_buff *skb) | 
 | { | 
 | 	return skb->data_len; | 
 | } | 
 |  | 
 | static inline unsigned int skb_headlen(const struct sk_buff *skb) | 
 | { | 
 | 	return skb->len - skb->data_len; | 
 | } | 
 |  | 
 | static inline int skb_pagelen(const struct sk_buff *skb) | 
 | { | 
 | 	int i, len = 0; | 
 |  | 
 | 	for (i = (int)skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) | 
 | 		len += skb_shinfo(skb)->frags[i].size; | 
 | 	return len + skb_headlen(skb); | 
 | } | 
 |  | 
 | static inline void skb_fill_page_desc(struct sk_buff *skb, int i, | 
 | 				      struct page *page, int off, int size) | 
 | { | 
 | 	skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | 
 |  | 
 | 	frag->page		  = page; | 
 | 	frag->page_offset	  = off; | 
 | 	frag->size		  = size; | 
 | 	skb_shinfo(skb)->nr_frags = i + 1; | 
 | } | 
 |  | 
 | #define SKB_PAGE_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->nr_frags) | 
 | #define SKB_FRAG_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->frag_list) | 
 | #define SKB_LINEAR_ASSERT(skb)  BUG_ON(skb_is_nonlinear(skb)) | 
 |  | 
 | /* | 
 |  *	Add data to an sk_buff | 
 |  */ | 
 | static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	unsigned char *tmp = skb->tail; | 
 | 	SKB_LINEAR_ASSERT(skb); | 
 | 	skb->tail += len; | 
 | 	skb->len  += len; | 
 | 	return tmp; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_put - add data to a buffer | 
 |  *	@skb: buffer to use | 
 |  *	@len: amount of data to add | 
 |  * | 
 |  *	This function extends the used data area of the buffer. If this would | 
 |  *	exceed the total buffer size the kernel will panic. A pointer to the | 
 |  *	first byte of the extra data is returned. | 
 |  */ | 
 | static inline unsigned char *skb_put(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	unsigned char *tmp = skb->tail; | 
 | 	SKB_LINEAR_ASSERT(skb); | 
 | 	skb->tail += len; | 
 | 	skb->len  += len; | 
 | 	if (unlikely(skb->tail>skb->end)) | 
 | 		skb_over_panic(skb, len, current_text_addr()); | 
 | 	return tmp; | 
 | } | 
 |  | 
 | static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	skb->data -= len; | 
 | 	skb->len  += len; | 
 | 	return skb->data; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_push - add data to the start of a buffer | 
 |  *	@skb: buffer to use | 
 |  *	@len: amount of data to add | 
 |  * | 
 |  *	This function extends the used data area of the buffer at the buffer | 
 |  *	start. If this would exceed the total buffer headroom the kernel will | 
 |  *	panic. A pointer to the first byte of the extra data is returned. | 
 |  */ | 
 | static inline unsigned char *skb_push(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	skb->data -= len; | 
 | 	skb->len  += len; | 
 | 	if (unlikely(skb->data<skb->head)) | 
 | 		skb_under_panic(skb, len, current_text_addr()); | 
 | 	return skb->data; | 
 | } | 
 |  | 
 | static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	skb->len -= len; | 
 | 	BUG_ON(skb->len < skb->data_len); | 
 | 	return skb->data += len; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_pull - remove data from the start of a buffer | 
 |  *	@skb: buffer to use | 
 |  *	@len: amount of data to remove | 
 |  * | 
 |  *	This function removes data from the start of a buffer, returning | 
 |  *	the memory to the headroom. A pointer to the next data in the buffer | 
 |  *	is returned. Once the data has been pulled future pushes will overwrite | 
 |  *	the old data. | 
 |  */ | 
 | static inline unsigned char *skb_pull(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len); | 
 | } | 
 |  | 
 | extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta); | 
 |  | 
 | static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	if (len > skb_headlen(skb) && | 
 | 	    !__pskb_pull_tail(skb, len-skb_headlen(skb))) | 
 | 		return NULL; | 
 | 	skb->len -= len; | 
 | 	return skb->data += len; | 
 | } | 
 |  | 
 | static inline unsigned char *pskb_pull(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	return unlikely(len > skb->len) ? NULL : __pskb_pull(skb, len); | 
 | } | 
 |  | 
 | static inline int pskb_may_pull(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	if (likely(len <= skb_headlen(skb))) | 
 | 		return 1; | 
 | 	if (unlikely(len > skb->len)) | 
 | 		return 0; | 
 | 	return __pskb_pull_tail(skb, len-skb_headlen(skb)) != NULL; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_headroom - bytes at buffer head | 
 |  *	@skb: buffer to check | 
 |  * | 
 |  *	Return the number of bytes of free space at the head of an &sk_buff. | 
 |  */ | 
 | static inline int skb_headroom(const struct sk_buff *skb) | 
 | { | 
 | 	return skb->data - skb->head; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_tailroom - bytes at buffer end | 
 |  *	@skb: buffer to check | 
 |  * | 
 |  *	Return the number of bytes of free space at the tail of an sk_buff | 
 |  */ | 
 | static inline int skb_tailroom(const struct sk_buff *skb) | 
 | { | 
 | 	return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_reserve - adjust headroom | 
 |  *	@skb: buffer to alter | 
 |  *	@len: bytes to move | 
 |  * | 
 |  *	Increase the headroom of an empty &sk_buff by reducing the tail | 
 |  *	room. This is only allowed for an empty buffer. | 
 |  */ | 
 | static inline void skb_reserve(struct sk_buff *skb, int len) | 
 | { | 
 | 	skb->data += len; | 
 | 	skb->tail += len; | 
 | } | 
 |  | 
 | /* | 
 |  * CPUs often take a performance hit when accessing unaligned memory | 
 |  * locations. The actual performance hit varies, it can be small if the | 
 |  * hardware handles it or large if we have to take an exception and fix it | 
 |  * in software. | 
 |  * | 
 |  * Since an ethernet header is 14 bytes network drivers often end up with | 
 |  * the IP header at an unaligned offset. The IP header can be aligned by | 
 |  * shifting the start of the packet by 2 bytes. Drivers should do this | 
 |  * with: | 
 |  * | 
 |  * skb_reserve(NET_IP_ALIGN); | 
 |  * | 
 |  * The downside to this alignment of the IP header is that the DMA is now | 
 |  * unaligned. On some architectures the cost of an unaligned DMA is high | 
 |  * and this cost outweighs the gains made by aligning the IP header. | 
 |  *  | 
 |  * Since this trade off varies between architectures, we allow NET_IP_ALIGN | 
 |  * to be overridden. | 
 |  */ | 
 | #ifndef NET_IP_ALIGN | 
 | #define NET_IP_ALIGN	2 | 
 | #endif | 
 |  | 
 | /* | 
 |  * The networking layer reserves some headroom in skb data (via | 
 |  * dev_alloc_skb). This is used to avoid having to reallocate skb data when | 
 |  * the header has to grow. In the default case, if the header has to grow | 
 |  * 16 bytes or less we avoid the reallocation. | 
 |  * | 
 |  * Unfortunately this headroom changes the DMA alignment of the resulting | 
 |  * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive | 
 |  * on some architectures. An architecture can override this value, | 
 |  * perhaps setting it to a cacheline in size (since that will maintain | 
 |  * cacheline alignment of the DMA). It must be a power of 2. | 
 |  * | 
 |  * Various parts of the networking layer expect at least 16 bytes of | 
 |  * headroom, you should not reduce this. | 
 |  */ | 
 | #ifndef NET_SKB_PAD | 
 | #define NET_SKB_PAD	16 | 
 | #endif | 
 |  | 
 | extern int ___pskb_trim(struct sk_buff *skb, unsigned int len); | 
 |  | 
 | static inline void __skb_trim(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	if (unlikely(skb->data_len)) { | 
 | 		WARN_ON(1); | 
 | 		return; | 
 | 	} | 
 | 	skb->len  = len; | 
 | 	skb->tail = skb->data + len; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_trim - remove end from a buffer | 
 |  *	@skb: buffer to alter | 
 |  *	@len: new length | 
 |  * | 
 |  *	Cut the length of a buffer down by removing data from the tail. If | 
 |  *	the buffer is already under the length specified it is not modified. | 
 |  *	The skb must be linear. | 
 |  */ | 
 | static inline void skb_trim(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	if (skb->len > len) | 
 | 		__skb_trim(skb, len); | 
 | } | 
 |  | 
 |  | 
 | static inline int __pskb_trim(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	if (skb->data_len) | 
 | 		return ___pskb_trim(skb, len); | 
 | 	__skb_trim(skb, len); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline int pskb_trim(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	return (len < skb->len) ? __pskb_trim(skb, len) : 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer | 
 |  *	@skb: buffer to alter | 
 |  *	@len: new length | 
 |  * | 
 |  *	This is identical to pskb_trim except that the caller knows that | 
 |  *	the skb is not cloned so we should never get an error due to out- | 
 |  *	of-memory. | 
 |  */ | 
 | static inline void pskb_trim_unique(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	int err = pskb_trim(skb, len); | 
 | 	BUG_ON(err); | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_orphan - orphan a buffer | 
 |  *	@skb: buffer to orphan | 
 |  * | 
 |  *	If a buffer currently has an owner then we call the owner's | 
 |  *	destructor function and make the @skb unowned. The buffer continues | 
 |  *	to exist but is no longer charged to its former owner. | 
 |  */ | 
 | static inline void skb_orphan(struct sk_buff *skb) | 
 | { | 
 | 	if (skb->destructor) | 
 | 		skb->destructor(skb); | 
 | 	skb->destructor = NULL; | 
 | 	skb->sk		= NULL; | 
 | } | 
 |  | 
 | /** | 
 |  *	__skb_queue_purge - empty a list | 
 |  *	@list: list to empty | 
 |  * | 
 |  *	Delete all buffers on an &sk_buff list. Each buffer is removed from | 
 |  *	the list and one reference dropped. This function does not take the | 
 |  *	list lock and the caller must hold the relevant locks to use it. | 
 |  */ | 
 | extern void skb_queue_purge(struct sk_buff_head *list); | 
 | static inline void __skb_queue_purge(struct sk_buff_head *list) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	while ((skb = __skb_dequeue(list)) != NULL) | 
 | 		kfree_skb(skb); | 
 | } | 
 |  | 
 | /** | 
 |  *	__dev_alloc_skb - allocate an skbuff for receiving | 
 |  *	@length: length to allocate | 
 |  *	@gfp_mask: get_free_pages mask, passed to alloc_skb | 
 |  * | 
 |  *	Allocate a new &sk_buff and assign it a usage count of one. The | 
 |  *	buffer has unspecified headroom built in. Users should allocate | 
 |  *	the headroom they think they need without accounting for the | 
 |  *	built in space. The built in space is used for optimisations. | 
 |  * | 
 |  *	%NULL is returned if there is no free memory. | 
 |  */ | 
 | static inline struct sk_buff *__dev_alloc_skb(unsigned int length, | 
 | 					      gfp_t gfp_mask) | 
 | { | 
 | 	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask); | 
 | 	if (likely(skb)) | 
 | 		skb_reserve(skb, NET_SKB_PAD); | 
 | 	return skb; | 
 | } | 
 |  | 
 | /** | 
 |  *	dev_alloc_skb - allocate an skbuff for receiving | 
 |  *	@length: length to allocate | 
 |  * | 
 |  *	Allocate a new &sk_buff and assign it a usage count of one. The | 
 |  *	buffer has unspecified headroom built in. Users should allocate | 
 |  *	the headroom they think they need without accounting for the | 
 |  *	built in space. The built in space is used for optimisations. | 
 |  * | 
 |  *	%NULL is returned if there is no free memory. Although this function | 
 |  *	allocates memory it can be called from an interrupt. | 
 |  */ | 
 | static inline struct sk_buff *dev_alloc_skb(unsigned int length) | 
 | { | 
 | 	return __dev_alloc_skb(length, GFP_ATOMIC); | 
 | } | 
 |  | 
 | extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev, | 
 | 		unsigned int length, gfp_t gfp_mask); | 
 |  | 
 | /** | 
 |  *	netdev_alloc_skb - allocate an skbuff for rx on a specific device | 
 |  *	@dev: network device to receive on | 
 |  *	@length: length to allocate | 
 |  * | 
 |  *	Allocate a new &sk_buff and assign it a usage count of one. The | 
 |  *	buffer has unspecified headroom built in. Users should allocate | 
 |  *	the headroom they think they need without accounting for the | 
 |  *	built in space. The built in space is used for optimisations. | 
 |  * | 
 |  *	%NULL is returned if there is no free memory. Although this function | 
 |  *	allocates memory it can be called from an interrupt. | 
 |  */ | 
 | static inline struct sk_buff *netdev_alloc_skb(struct net_device *dev, | 
 | 		unsigned int length) | 
 | { | 
 | 	return __netdev_alloc_skb(dev, length, GFP_ATOMIC); | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_cow - copy header of skb when it is required | 
 |  *	@skb: buffer to cow | 
 |  *	@headroom: needed headroom | 
 |  * | 
 |  *	If the skb passed lacks sufficient headroom or its data part | 
 |  *	is shared, data is reallocated. If reallocation fails, an error | 
 |  *	is returned and original skb is not changed. | 
 |  * | 
 |  *	The result is skb with writable area skb->head...skb->tail | 
 |  *	and at least @headroom of space at head. | 
 |  */ | 
 | static inline int skb_cow(struct sk_buff *skb, unsigned int headroom) | 
 | { | 
 | 	int delta = (headroom > NET_SKB_PAD ? headroom : NET_SKB_PAD) - | 
 | 			skb_headroom(skb); | 
 |  | 
 | 	if (delta < 0) | 
 | 		delta = 0; | 
 |  | 
 | 	if (delta || skb_cloned(skb)) | 
 | 		return pskb_expand_head(skb, (delta + (NET_SKB_PAD-1)) & | 
 | 				~(NET_SKB_PAD-1), 0, GFP_ATOMIC); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_padto	- pad an skbuff up to a minimal size | 
 |  *	@skb: buffer to pad | 
 |  *	@len: minimal length | 
 |  * | 
 |  *	Pads up a buffer to ensure the trailing bytes exist and are | 
 |  *	blanked. If the buffer already contains sufficient data it | 
 |  *	is untouched. Otherwise it is extended. Returns zero on | 
 |  *	success. The skb is freed on error. | 
 |  */ | 
 |   | 
 | static inline int skb_padto(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	unsigned int size = skb->len; | 
 | 	if (likely(size >= len)) | 
 | 		return 0; | 
 | 	return skb_pad(skb, len-size); | 
 | } | 
 |  | 
 | static inline int skb_add_data(struct sk_buff *skb, | 
 | 			       char __user *from, int copy) | 
 | { | 
 | 	const int off = skb->len; | 
 |  | 
 | 	if (skb->ip_summed == CHECKSUM_NONE) { | 
 | 		int err = 0; | 
 | 		unsigned int csum = csum_and_copy_from_user(from, | 
 | 							    skb_put(skb, copy), | 
 | 							    copy, 0, &err); | 
 | 		if (!err) { | 
 | 			skb->csum = csum_block_add(skb->csum, csum, off); | 
 | 			return 0; | 
 | 		} | 
 | 	} else if (!copy_from_user(skb_put(skb, copy), from, copy)) | 
 | 		return 0; | 
 |  | 
 | 	__skb_trim(skb, off); | 
 | 	return -EFAULT; | 
 | } | 
 |  | 
 | static inline int skb_can_coalesce(struct sk_buff *skb, int i, | 
 | 				   struct page *page, int off) | 
 | { | 
 | 	if (i) { | 
 | 		struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1]; | 
 |  | 
 | 		return page == frag->page && | 
 | 		       off == frag->page_offset + frag->size; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline int __skb_linearize(struct sk_buff *skb) | 
 | { | 
 | 	return __pskb_pull_tail(skb, skb->data_len) ? 0 : -ENOMEM; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_linearize - convert paged skb to linear one | 
 |  *	@skb: buffer to linarize | 
 |  * | 
 |  *	If there is no free memory -ENOMEM is returned, otherwise zero | 
 |  *	is returned and the old skb data released. | 
 |  */ | 
 | static inline int skb_linearize(struct sk_buff *skb) | 
 | { | 
 | 	return skb_is_nonlinear(skb) ? __skb_linearize(skb) : 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_linearize_cow - make sure skb is linear and writable | 
 |  *	@skb: buffer to process | 
 |  * | 
 |  *	If there is no free memory -ENOMEM is returned, otherwise zero | 
 |  *	is returned and the old skb data released. | 
 |  */ | 
 | static inline int skb_linearize_cow(struct sk_buff *skb) | 
 | { | 
 | 	return skb_is_nonlinear(skb) || skb_cloned(skb) ? | 
 | 	       __skb_linearize(skb) : 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	skb_postpull_rcsum - update checksum for received skb after pull | 
 |  *	@skb: buffer to update | 
 |  *	@start: start of data before pull | 
 |  *	@len: length of data pulled | 
 |  * | 
 |  *	After doing a pull on a received packet, you need to call this to | 
 |  *	update the CHECKSUM_COMPLETE checksum, or set ip_summed to | 
 |  *	CHECKSUM_NONE so that it can be recomputed from scratch. | 
 |  */ | 
 |  | 
 | static inline void skb_postpull_rcsum(struct sk_buff *skb, | 
 | 				      const void *start, unsigned int len) | 
 | { | 
 | 	if (skb->ip_summed == CHECKSUM_COMPLETE) | 
 | 		skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0)); | 
 | } | 
 |  | 
 | unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len); | 
 |  | 
 | /** | 
 |  *	pskb_trim_rcsum - trim received skb and update checksum | 
 |  *	@skb: buffer to trim | 
 |  *	@len: new length | 
 |  * | 
 |  *	This is exactly the same as pskb_trim except that it ensures the | 
 |  *	checksum of received packets are still valid after the operation. | 
 |  */ | 
 |  | 
 | static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) | 
 | { | 
 | 	if (likely(len >= skb->len)) | 
 | 		return 0; | 
 | 	if (skb->ip_summed == CHECKSUM_COMPLETE) | 
 | 		skb->ip_summed = CHECKSUM_NONE; | 
 | 	return __pskb_trim(skb, len); | 
 | } | 
 |  | 
 | static inline void *kmap_skb_frag(const skb_frag_t *frag) | 
 | { | 
 | #ifdef CONFIG_HIGHMEM | 
 | 	BUG_ON(in_irq()); | 
 |  | 
 | 	local_bh_disable(); | 
 | #endif | 
 | 	return kmap_atomic(frag->page, KM_SKB_DATA_SOFTIRQ); | 
 | } | 
 |  | 
 | static inline void kunmap_skb_frag(void *vaddr) | 
 | { | 
 | 	kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ); | 
 | #ifdef CONFIG_HIGHMEM | 
 | 	local_bh_enable(); | 
 | #endif | 
 | } | 
 |  | 
 | #define skb_queue_walk(queue, skb) \ | 
 | 		for (skb = (queue)->next;					\ | 
 | 		     prefetch(skb->next), (skb != (struct sk_buff *)(queue));	\ | 
 | 		     skb = skb->next) | 
 |  | 
 | #define skb_queue_reverse_walk(queue, skb) \ | 
 | 		for (skb = (queue)->prev;					\ | 
 | 		     prefetch(skb->prev), (skb != (struct sk_buff *)(queue));	\ | 
 | 		     skb = skb->prev) | 
 |  | 
 |  | 
 | extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, | 
 | 					 int noblock, int *err); | 
 | extern unsigned int    datagram_poll(struct file *file, struct socket *sock, | 
 | 				     struct poll_table_struct *wait); | 
 | extern int	       skb_copy_datagram_iovec(const struct sk_buff *from, | 
 | 					       int offset, struct iovec *to, | 
 | 					       int size); | 
 | extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb, | 
 | 							int hlen, | 
 | 							struct iovec *iov); | 
 | extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb); | 
 | extern void	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb, | 
 | 					 unsigned int flags); | 
 | extern unsigned int    skb_checksum(const struct sk_buff *skb, int offset, | 
 | 				    int len, unsigned int csum); | 
 | extern int	       skb_copy_bits(const struct sk_buff *skb, int offset, | 
 | 				     void *to, int len); | 
 | extern int	       skb_store_bits(const struct sk_buff *skb, int offset, | 
 | 				      void *from, int len); | 
 | extern unsigned int    skb_copy_and_csum_bits(const struct sk_buff *skb, | 
 | 					      int offset, u8 *to, int len, | 
 | 					      unsigned int csum); | 
 | extern void	       skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to); | 
 | extern void	       skb_split(struct sk_buff *skb, | 
 | 				 struct sk_buff *skb1, const u32 len); | 
 |  | 
 | extern struct sk_buff *skb_segment(struct sk_buff *skb, int features); | 
 |  | 
 | static inline void *skb_header_pointer(const struct sk_buff *skb, int offset, | 
 | 				       int len, void *buffer) | 
 | { | 
 | 	int hlen = skb_headlen(skb); | 
 |  | 
 | 	if (hlen - offset >= len) | 
 | 		return skb->data + offset; | 
 |  | 
 | 	if (skb_copy_bits(skb, offset, buffer, len) < 0) | 
 | 		return NULL; | 
 |  | 
 | 	return buffer; | 
 | } | 
 |  | 
 | extern void skb_init(void); | 
 | extern void skb_add_mtu(int mtu); | 
 |  | 
 | /** | 
 |  *	skb_get_timestamp - get timestamp from a skb | 
 |  *	@skb: skb to get stamp from | 
 |  *	@stamp: pointer to struct timeval to store stamp in | 
 |  * | 
 |  *	Timestamps are stored in the skb as offsets to a base timestamp. | 
 |  *	This function converts the offset back to a struct timeval and stores | 
 |  *	it in stamp. | 
 |  */ | 
 | static inline void skb_get_timestamp(const struct sk_buff *skb, struct timeval *stamp) | 
 | { | 
 | 	stamp->tv_sec  = skb->tstamp.off_sec; | 
 | 	stamp->tv_usec = skb->tstamp.off_usec; | 
 | } | 
 |  | 
 | /** | 
 |  * 	skb_set_timestamp - set timestamp of a skb | 
 |  *	@skb: skb to set stamp of | 
 |  *	@stamp: pointer to struct timeval to get stamp from | 
 |  * | 
 |  *	Timestamps are stored in the skb as offsets to a base timestamp. | 
 |  *	This function converts a struct timeval to an offset and stores | 
 |  *	it in the skb. | 
 |  */ | 
 | static inline void skb_set_timestamp(struct sk_buff *skb, const struct timeval *stamp) | 
 | { | 
 | 	skb->tstamp.off_sec  = stamp->tv_sec; | 
 | 	skb->tstamp.off_usec = stamp->tv_usec; | 
 | } | 
 |  | 
 | extern void __net_timestamp(struct sk_buff *skb); | 
 |  | 
 | extern unsigned int __skb_checksum_complete(struct sk_buff *skb); | 
 |  | 
 | /** | 
 |  *	skb_checksum_complete - Calculate checksum of an entire packet | 
 |  *	@skb: packet to process | 
 |  * | 
 |  *	This function calculates the checksum over the entire packet plus | 
 |  *	the value of skb->csum.  The latter can be used to supply the | 
 |  *	checksum of a pseudo header as used by TCP/UDP.  It returns the | 
 |  *	checksum. | 
 |  * | 
 |  *	For protocols that contain complete checksums such as ICMP/TCP/UDP, | 
 |  *	this function can be used to verify that checksum on received | 
 |  *	packets.  In that case the function should return zero if the | 
 |  *	checksum is correct.  In particular, this function will return zero | 
 |  *	if skb->ip_summed is CHECKSUM_UNNECESSARY which indicates that the | 
 |  *	hardware has already verified the correctness of the checksum. | 
 |  */ | 
 | static inline unsigned int skb_checksum_complete(struct sk_buff *skb) | 
 | { | 
 | 	return skb->ip_summed != CHECKSUM_UNNECESSARY && | 
 | 		__skb_checksum_complete(skb); | 
 | } | 
 |  | 
 | #ifdef CONFIG_NETFILTER | 
 | static inline void nf_conntrack_put(struct nf_conntrack *nfct) | 
 | { | 
 | 	if (nfct && atomic_dec_and_test(&nfct->use)) | 
 | 		nfct->destroy(nfct); | 
 | } | 
 | static inline void nf_conntrack_get(struct nf_conntrack *nfct) | 
 | { | 
 | 	if (nfct) | 
 | 		atomic_inc(&nfct->use); | 
 | } | 
 | #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | 
 | static inline void nf_conntrack_get_reasm(struct sk_buff *skb) | 
 | { | 
 | 	if (skb) | 
 | 		atomic_inc(&skb->users); | 
 | } | 
 | static inline void nf_conntrack_put_reasm(struct sk_buff *skb) | 
 | { | 
 | 	if (skb) | 
 | 		kfree_skb(skb); | 
 | } | 
 | #endif | 
 | #ifdef CONFIG_BRIDGE_NETFILTER | 
 | static inline void nf_bridge_put(struct nf_bridge_info *nf_bridge) | 
 | { | 
 | 	if (nf_bridge && atomic_dec_and_test(&nf_bridge->use)) | 
 | 		kfree(nf_bridge); | 
 | } | 
 | static inline void nf_bridge_get(struct nf_bridge_info *nf_bridge) | 
 | { | 
 | 	if (nf_bridge) | 
 | 		atomic_inc(&nf_bridge->use); | 
 | } | 
 | #endif /* CONFIG_BRIDGE_NETFILTER */ | 
 | static inline void nf_reset(struct sk_buff *skb) | 
 | { | 
 | 	nf_conntrack_put(skb->nfct); | 
 | 	skb->nfct = NULL; | 
 | #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | 
 | 	nf_conntrack_put_reasm(skb->nfct_reasm); | 
 | 	skb->nfct_reasm = NULL; | 
 | #endif | 
 | #ifdef CONFIG_BRIDGE_NETFILTER | 
 | 	nf_bridge_put(skb->nf_bridge); | 
 | 	skb->nf_bridge = NULL; | 
 | #endif | 
 | } | 
 |  | 
 | #else /* CONFIG_NETFILTER */ | 
 | static inline void nf_reset(struct sk_buff *skb) {} | 
 | #endif /* CONFIG_NETFILTER */ | 
 |  | 
 | #ifdef CONFIG_NETWORK_SECMARK | 
 | static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from) | 
 | { | 
 | 	to->secmark = from->secmark; | 
 | } | 
 |  | 
 | static inline void skb_init_secmark(struct sk_buff *skb) | 
 | { | 
 | 	skb->secmark = 0; | 
 | } | 
 | #else | 
 | static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from) | 
 | { } | 
 |  | 
 | static inline void skb_init_secmark(struct sk_buff *skb) | 
 | { } | 
 | #endif | 
 |  | 
 | static inline int skb_is_gso(const struct sk_buff *skb) | 
 | { | 
 | 	return skb_shinfo(skb)->gso_size; | 
 | } | 
 |  | 
 | #endif	/* __KERNEL__ */ | 
 | #endif	/* _LINUX_SKBUFF_H */ |