ARM: at91: dt: switch DMA DT bindings to pre-processor
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index c00e158..03b8c02 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -9,6 +9,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
@@ -63,7 +64,7 @@
compatible = "atmel,hsmci";
reg = <0xf0000000 0x600>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 2 0>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
@@ -116,8 +117,8 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0014000 0x4000>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma0 2 7>,
- <&dma0 2 8>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
@@ -130,8 +131,8 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0018000 0x4000>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma0 2 9>,
- <&dma0 2 10>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@@ -178,7 +179,7 @@
compatible = "atmel,hsmci";
reg = <0xf8000000 0x600>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma1 2 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
@@ -191,7 +192,7 @@
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma1 2 1>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
@@ -309,8 +310,8 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf801c000 0x4000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma1 2 11>,
- <&dma1 2 12>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;