[ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code
Convert set/reset_scoop_gpio to generic gpio calls.
This patch depends on the pxaficp_ir hooks patch.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
index c05e4fa..130bc60 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/include/asm-arm/arch-pxa/tosa.h
@@ -23,11 +23,12 @@
/*
* SCOOP2 internal GPIOs
*/
+#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO
#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11
#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12
-#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13
-#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14
-#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15
+#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
+#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3)
+#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4)
#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16
#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17
#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18
@@ -35,7 +36,7 @@
/* GPIO Direction 1 : output mode / 0:input mode */
#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
- TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\
+ TOSA_SCOOP_AUD_PWR_ON |\
TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
/* GPIO out put level when init 1: Hi */
#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN )
@@ -43,10 +44,11 @@
/*
* SCOOP2 jacket GPIOs
*/
+#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12)
#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11
#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12
#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13
-#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14
+#define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3)
#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15
#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16
#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17
@@ -55,11 +57,9 @@
/* GPIO Direction 1 : output mode / 0:input mode */
#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \
- TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \
+ TOSA_SCOOP_JC_CHRG_ERR_LED | \
TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL )
-/* GPIO out put level when init 1: Hi */
-#define TOSA_SCOOP_JC_IO_OUT ( 0 )
/*
* Timing Generator
@@ -74,15 +74,6 @@
#define TG_HPOSCTL 0x07
/*
- * LED
- */
-#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11
-#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12
-#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13
-#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18
-
-
-/*
* PXA GPIOs
*/
#define TOSA_GPIO_POWERON (0)