|  | /* | 
|  | * sound/gus_card.c | 
|  | * | 
|  | * Detection routine for the Gravis Ultrasound. | 
|  | * | 
|  | * Copyright (C) by Hannu Savolainen 1993-1997 | 
|  | * | 
|  | * | 
|  | * Frank van de Pol : Fixed GUS MAX interrupt handling, enabled simultanious | 
|  | *                    usage of CS4231A codec, GUS wave and MIDI for GUS MAX. | 
|  | * Christoph Hellwig: Adapted to module_init/module_exit, simple cleanups. | 
|  | * | 
|  | * Status: | 
|  | *              Tested... | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include "sound_config.h" | 
|  |  | 
|  | #include "gus.h" | 
|  | #include "gus_hw.h" | 
|  |  | 
|  | irqreturn_t gusintr(int irq, void *dev_id, struct pt_regs *dummy); | 
|  |  | 
|  | int             gus_base = 0, gus_irq = 0, gus_dma = 0; | 
|  | int             gus_no_wave_dma = 0; | 
|  | extern int      gus_wave_volume; | 
|  | extern int      gus_pcm_volume; | 
|  | extern int      have_gus_max; | 
|  | int             gus_pnp_flag = 0; | 
|  | #ifdef CONFIG_SOUND_GUS16 | 
|  | static int      db16;	/* Has a Gus16 AD1848 on it */ | 
|  | #endif | 
|  |  | 
|  | static void __init attach_gus(struct address_info *hw_config) | 
|  | { | 
|  | gus_wave_init(hw_config); | 
|  |  | 
|  | if (sound_alloc_dma(hw_config->dma, "GUS")) | 
|  | printk(KERN_ERR "gus_card.c: Can't allocate DMA channel %d\n", hw_config->dma); | 
|  | if (hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma) | 
|  | if (sound_alloc_dma(hw_config->dma2, "GUS(2)")) | 
|  | printk(KERN_ERR "gus_card.c: Can't allocate DMA channel %d\n", hw_config->dma2); | 
|  | gus_midi_init(hw_config); | 
|  | if(request_irq(hw_config->irq, gusintr, 0,  "Gravis Ultrasound", hw_config)<0) | 
|  | printk(KERN_ERR "gus_card.c: Unable to allocate IRQ %d\n", hw_config->irq); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int __init probe_gus(struct address_info *hw_config) | 
|  | { | 
|  | int             irq; | 
|  | int             io_addr; | 
|  |  | 
|  | if (hw_config->card_subtype == 1) | 
|  | gus_pnp_flag = 1; | 
|  |  | 
|  | irq = hw_config->irq; | 
|  |  | 
|  | if (hw_config->card_subtype == 0)	/* GUS/MAX/ACE */ | 
|  | if (irq != 3 && irq != 5 && irq != 7 && irq != 9 && | 
|  | irq != 11 && irq != 12 && irq != 15) | 
|  | { | 
|  | printk(KERN_ERR "GUS: Unsupported IRQ %d\n", irq); | 
|  | return 0; | 
|  | } | 
|  | if (gus_wave_detect(hw_config->io_base)) | 
|  | return 1; | 
|  |  | 
|  | #ifndef EXCLUDE_GUS_IODETECT | 
|  |  | 
|  | /* | 
|  | * Look at the possible base addresses (0x2X0, X=1, 2, 3, 4, 5, 6) | 
|  | */ | 
|  |  | 
|  | for (io_addr = 0x210; io_addr <= 0x260; io_addr += 0x10) { | 
|  | if (io_addr == hw_config->io_base)	/* Already tested */ | 
|  | continue; | 
|  | if (gus_wave_detect(io_addr)) { | 
|  | hw_config->io_base = io_addr; | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | printk("NO GUS card found !\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit unload_gus(struct address_info *hw_config) | 
|  | { | 
|  | DDB(printk("unload_gus(%x)\n", hw_config->io_base)); | 
|  |  | 
|  | gus_wave_unload(hw_config); | 
|  |  | 
|  | release_region(hw_config->io_base, 16); | 
|  | release_region(hw_config->io_base + 0x100, 12);		/* 0x10c-> is MAX */ | 
|  | free_irq(hw_config->irq, hw_config); | 
|  |  | 
|  | sound_free_dma(hw_config->dma); | 
|  |  | 
|  | if (hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma) | 
|  | sound_free_dma(hw_config->dma2); | 
|  | } | 
|  |  | 
|  | irqreturn_t gusintr(int irq, void *dev_id, struct pt_regs *dummy) | 
|  | { | 
|  | unsigned char src; | 
|  | extern int gus_timer_enabled; | 
|  | int handled = 0; | 
|  |  | 
|  | #ifdef CONFIG_SOUND_GUSMAX | 
|  | if (have_gus_max) { | 
|  | struct address_info *hw_config = dev_id; | 
|  | adintr(irq, (void *)hw_config->slots[1], NULL); | 
|  | } | 
|  | #endif | 
|  | #ifdef CONFIG_SOUND_GUS16 | 
|  | if (db16) { | 
|  | struct address_info *hw_config = dev_id; | 
|  | adintr(irq, (void *)hw_config->slots[3], NULL); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | while (1) | 
|  | { | 
|  | if (!(src = inb(u_IrqStatus))) | 
|  | break; | 
|  | handled = 1; | 
|  | if (src & DMA_TC_IRQ) | 
|  | { | 
|  | guswave_dma_irq(); | 
|  | } | 
|  | if (src & (MIDI_TX_IRQ | MIDI_RX_IRQ)) | 
|  | { | 
|  | gus_midi_interrupt(0); | 
|  | } | 
|  | if (src & (GF1_TIMER1_IRQ | GF1_TIMER2_IRQ)) | 
|  | { | 
|  | if (gus_timer_enabled) | 
|  | sound_timer_interrupt(); | 
|  | gus_write8(0x45, 0);	/* Ack IRQ */ | 
|  | gus_timer_command(4, 0x80);		/* Reset IRQ flags */ | 
|  | } | 
|  | if (src & (WAVETABLE_IRQ | ENVELOPE_IRQ)) | 
|  | gus_voice_irq(); | 
|  | } | 
|  | return IRQ_RETVAL(handled); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Some extra code for the 16 bit sampling option | 
|  | */ | 
|  |  | 
|  | #ifdef CONFIG_SOUND_GUS16 | 
|  |  | 
|  | static int __init init_gus_db16(struct address_info *hw_config) | 
|  | { | 
|  | struct resource *ports; | 
|  |  | 
|  | ports = request_region(hw_config->io_base, 4, "ad1848"); | 
|  | if (!ports) | 
|  | return 0; | 
|  |  | 
|  | if (!ad1848_detect(ports, NULL, hw_config->osp)) { | 
|  | release_region(hw_config->io_base, 4); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | gus_pcm_volume = 100; | 
|  | gus_wave_volume = 90; | 
|  |  | 
|  | hw_config->slots[3] = ad1848_init("GUS 16 bit sampling", ports, | 
|  | hw_config->irq, | 
|  | hw_config->dma, | 
|  | hw_config->dma, 0, | 
|  | hw_config->osp, | 
|  | THIS_MODULE); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void __exit unload_gus_db16(struct address_info *hw_config) | 
|  | { | 
|  |  | 
|  | ad1848_unload(hw_config->io_base, | 
|  | hw_config->irq, | 
|  | hw_config->dma, | 
|  | hw_config->dma, 0); | 
|  | sound_unload_audiodev(hw_config->slots[3]); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_SOUND_GUS16 | 
|  | static int gus16; | 
|  | #endif | 
|  | #ifdef CONFIG_SOUND_GUSMAX | 
|  | static int no_wave_dma;   /* Set if no dma is to be used for the | 
|  | wave table (GF1 chip) */ | 
|  | #endif | 
|  |  | 
|  |  | 
|  | /* | 
|  | *    Note DMA2 of -1 has the right meaning in the GUS driver as well | 
|  | *      as here. | 
|  | */ | 
|  |  | 
|  | static struct address_info cfg; | 
|  |  | 
|  | static int __initdata io = -1; | 
|  | static int __initdata irq = -1; | 
|  | static int __initdata dma = -1; | 
|  | static int __initdata dma16 = -1;	/* Set this for modules that need it */ | 
|  | static int __initdata type = 0;		/* 1 for PnP */ | 
|  |  | 
|  | module_param(io, int, 0); | 
|  | module_param(irq, int, 0); | 
|  | module_param(dma, int, 0); | 
|  | module_param(dma16, int, 0); | 
|  | module_param(type, int, 0); | 
|  | #ifdef CONFIG_SOUND_GUSMAX | 
|  | module_param(no_wave_dma, int, 0); | 
|  | #endif | 
|  | #ifdef CONFIG_SOUND_GUS16 | 
|  | module_param(db16, int, 0); | 
|  | module_param(gus16, int, 0); | 
|  | #endif | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static int __init init_gus(void) | 
|  | { | 
|  | printk(KERN_INFO "Gravis Ultrasound audio driver Copyright (C) by Hannu Savolainen 1993-1996\n"); | 
|  |  | 
|  | cfg.io_base = io; | 
|  | cfg.irq = irq; | 
|  | cfg.dma = dma; | 
|  | cfg.dma2 = dma16; | 
|  | cfg.card_subtype = type; | 
|  | #ifdef CONFIG_SOUND_GUSMAX | 
|  | gus_no_wave_dma = no_wave_dma; | 
|  | #endif | 
|  |  | 
|  | if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) { | 
|  | printk(KERN_ERR "I/O, IRQ, and DMA are mandatory\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SOUND_GUS16 | 
|  | if (gus16 && init_gus_db16(&cfg)) | 
|  | db16 = 1; | 
|  | #endif | 
|  | if (!probe_gus(&cfg)) | 
|  | return -ENODEV; | 
|  | attach_gus(&cfg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit cleanup_gus(void) | 
|  | { | 
|  | #ifdef CONFIG_SOUND_GUS16 | 
|  | if (db16) | 
|  | unload_gus_db16(&cfg); | 
|  | #endif | 
|  | unload_gus(&cfg); | 
|  | } | 
|  |  | 
|  | module_init(init_gus); | 
|  | module_exit(cleanup_gus); | 
|  |  | 
|  | #ifndef MODULE | 
|  | static int __init setup_gus(char *str) | 
|  | { | 
|  | /* io, irq, dma, dma2 */ | 
|  | int ints[5]; | 
|  |  | 
|  | str = get_options(str, ARRAY_SIZE(ints), ints); | 
|  |  | 
|  | io	= ints[1]; | 
|  | irq	= ints[2]; | 
|  | dma	= ints[3]; | 
|  | dma16	= ints[4]; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("gus=", setup_gus); | 
|  | #endif |