cyclom: Update to current logging forms
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c
index cf9e15f..06f3f63 100644
--- a/drivers/net/wan/cycx_x25.c
+++ b/drivers/net/wan/cycx_x25.c
@@ -76,6 +76,8 @@
* 1998/08/08 acme Initial version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define CYCLOMX_X25_DEBUG 1
#include <linux/ctype.h> /* isdigit() */
@@ -230,8 +232,8 @@
/* Verify configuration ID */
if (conf->config_id != WANCONFIG_X25) {
- printk(KERN_INFO "%s: invalid configuration ID %u!\n",
- card->devname, conf->config_id);
+ pr_info("%s: invalid configuration ID %u!\n",
+ card->devname, conf->config_id);
return -EINVAL;
}
@@ -374,8 +376,7 @@
int err = 0;
if (!conf->name[0] || strlen(conf->name) > WAN_IFNAME_SZ) {
- printk(KERN_INFO "%s: invalid interface name!\n",
- card->devname);
+ pr_info("%s: invalid interface name!\n", card->devname);
return -EINVAL;
}
@@ -398,8 +399,8 @@
if (len) {
if (len > WAN_ADDRESS_SZ) {
- printk(KERN_ERR "%s: %s local addr too long!\n",
- wandev->name, chan->name);
+ pr_err("%s: %s local addr too long!\n",
+ wandev->name, chan->name);
err = -EINVAL;
goto error;
} else {
@@ -429,15 +430,14 @@
if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc)
chan->lcn = lcn;
else {
- printk(KERN_ERR
- "%s: PVC %u is out of range on interface %s!\n",
- wandev->name, lcn, chan->name);
+ pr_err("%s: PVC %u is out of range on interface %s!\n",
+ wandev->name, lcn, chan->name);
err = -EINVAL;
goto error;
}
} else {
- printk(KERN_ERR "%s: invalid media address on interface %s!\n",
- wandev->name, chan->name);
+ pr_err("%s: invalid media address on interface %s!\n",
+ wandev->name, chan->name);
err = -EINVAL;
goto error;
}
@@ -607,9 +607,8 @@
++chan->ifstats.tx_dropped;
else if (chan->svc && chan->protocol &&
chan->protocol != ntohs(skb->protocol)) {
- printk(KERN_INFO
- "%s: unsupported Ethertype 0x%04X on interface %s!\n",
- card->devname, ntohs(skb->protocol), dev->name);
+ pr_info("%s: unsupported Ethertype 0x%04X on interface %s!\n",
+ card->devname, ntohs(skb->protocol), dev->name);
++chan->ifstats.tx_errors;
} else if (chan->protocol == ETH_P_IP) {
switch (chan->state) {
@@ -643,9 +642,8 @@
cycx_x25_chan_disconnect(dev);
goto free_packet;
default:
- printk(KERN_INFO
- "%s: unknown %d x25-iface request on %s!\n",
- card->devname, skb->data[0], dev->name);
+ pr_info("%s: unknown %d x25-iface request on %s!\n",
+ card->devname, skb->data[0], dev->name);
++chan->ifstats.tx_errors;
goto free_packet;
}
@@ -746,8 +744,7 @@
card->buff_int_mode_unbusy = 1;
netif_wake_queue(dev);
} else
- printk(KERN_ERR "%s:ackvc for inexistent lcn %d\n",
- card->devname, lcn);
+ pr_err("%s:ackvc for inexistent lcn %d\n", card->devname, lcn);
}
/* Receive interrupt handler.
@@ -780,8 +777,8 @@
dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
if (!dev) {
/* Invalid channel, discard packet */
- printk(KERN_INFO "%s: receiving on orphaned LCN %d!\n",
- card->devname, lcn);
+ pr_info("%s: receiving on orphaned LCN %d!\n",
+ card->devname, lcn);
return;
}
@@ -802,8 +799,8 @@
if ((skb = dev_alloc_skb((chan->protocol == ETH_P_X25 ? 1 : 0) +
bufsize +
dev->hard_header_len)) == NULL) {
- printk(KERN_INFO "%s: no socket buffers available!\n",
- card->devname);
+ pr_info("%s: no socket buffers available!\n",
+ card->devname);
chan->drop_sequence = 1;
++chan->ifstats.rx_dropped;
return;
@@ -826,8 +823,8 @@
if (bitm)
chan->drop_sequence = 1;
- printk(KERN_INFO "%s: unexpectedly long packet sequence "
- "on interface %s!\n", card->devname, dev->name);
+ pr_info("%s: unexpectedly long packet sequence on interface %s!\n",
+ card->devname, dev->name);
++chan->ifstats.rx_length_errors;
return;
}
@@ -880,8 +877,8 @@
dev = cycx_x25_get_dev_by_dte_addr(wandev, rem);
if (!dev) {
/* Invalid channel, discard packet */
- printk(KERN_INFO "%s: connect not expected: remote %s!\n",
- card->devname, rem);
+ pr_info("%s: connect not expected: remote %s!\n",
+ card->devname, rem);
return;
}
@@ -909,8 +906,8 @@
if (!dev) {
/* Invalid channel, discard packet */
clear_bit(--key, (void*)&card->u.x.connection_keys);
- printk(KERN_INFO "%s: connect confirm not expected: lcn %d, "
- "key=%d!\n", card->devname, lcn, key);
+ pr_info("%s: connect confirm not expected: lcn %d, key=%d!\n",
+ card->devname, lcn, key);
return;
}
@@ -934,8 +931,8 @@
dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
if (!dev) {
/* Invalid channel, discard packet */
- printk(KERN_INFO "%s:disconnect confirm not expected!:lcn %d\n",
- card->devname, lcn);
+ pr_info("%s:disconnect confirm not expected!:lcn %d\n",
+ card->devname, lcn);
return;
}
@@ -980,13 +977,13 @@
cycx_peek(&card->hw, cmd->buf + 10 + toread, &code, 1);
cycx_peek(&card->hw, cmd->buf + 10 + toread + 1, &routine, 1);
- printk(KERN_INFO "cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n");
- printk(KERN_INFO "cmd->buf=0x%X\n", cmd->buf);
- printk(KERN_INFO "Log message code=0x%X\n", msg_code);
- printk(KERN_INFO "Link=%d\n", link);
- printk(KERN_INFO "log code=0x%X\n", code);
- printk(KERN_INFO "log routine=0x%X\n", routine);
- printk(KERN_INFO "Message size=%d\n", size);
+ pr_info("cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n");
+ pr_info("cmd->buf=0x%X\n", cmd->buf);
+ pr_info("Log message code=0x%X\n", msg_code);
+ pr_info("Link=%d\n", link);
+ pr_info("log code=0x%X\n", code);
+ pr_info("log routine=0x%X\n", routine);
+ pr_info("Message size=%d\n", size);
hex_dump("Message", bf, toread);
#endif
}
@@ -1009,24 +1006,14 @@
static void cycx_x25_irq_spurious(struct cycx_device *card,
struct cycx_x25_cmd *cmd)
{
- printk(KERN_INFO "%s: spurious interrupt (0x%X)!\n",
- card->devname, cmd->command);
+ pr_info("%s: spurious interrupt (0x%X)!\n",
+ card->devname, cmd->command);
}
#ifdef CYCLOMX_X25_DEBUG
static void hex_dump(char *msg, unsigned char *p, int len)
{
- unsigned char hex[1024],
- * phex = hex;
-
- if (len >= (sizeof(hex) / 2))
- len = (sizeof(hex) / 2) - 1;
-
- while (len--) {
- sprintf(phex, "%02x", *p++);
- phex += 2;
- }
-
- printk(KERN_INFO "%s: %s\n", msg, hex);
+ print_hex_dump(KERN_INFO, msg, DUMP_PREFIX_OFFSET, 16, 1,
+ p, len, true);
}
#endif
@@ -1203,8 +1190,8 @@
u8 key;
if (card->u.x.connection_keys == ~0U) {
- printk(KERN_INFO "%s: too many simultaneous connection "
- "requests!\n", card->devname);
+ pr_info("%s: too many simultaneous connection requests!\n",
+ card->devname);
return -EAGAIN;
}
@@ -1381,8 +1368,8 @@
if (chan->state == WAN_CONNECTED)
cycx_x25_chan_disconnect(dev);
else
- printk(KERN_ERR "%s: %s for svc (%s) not connected!\n",
- chan->card->devname, __func__, dev->name);
+ pr_err("%s: %s for svc (%s) not connected!\n",
+ chan->card->devname, __func__, dev->name);
}
/* Set logical channel state. */
@@ -1433,8 +1420,8 @@
break;
}
- printk(KERN_INFO "%s: interface %s %s\n", card->devname,
- dev->name, string_state);
+ pr_info("%s: interface %s %s\n",
+ card->devname, dev->name, string_state);
chan->state = state;
}
@@ -1488,7 +1475,7 @@
unsigned char *ptr;
if ((skb = dev_alloc_skb(1)) == NULL) {
- printk(KERN_ERR "%s: out of memory\n", __func__);
+ pr_err("%s: out of memory\n", __func__);
return;
}
@@ -1557,56 +1544,56 @@
#ifdef CYCLOMX_X25_DEBUG
static void cycx_x25_dump_config(struct cycx_x25_config *conf)
{
- printk(KERN_INFO "X.25 configuration\n");
- printk(KERN_INFO "-----------------\n");
- printk(KERN_INFO "link number=%d\n", conf->link);
- printk(KERN_INFO "line speed=%d\n", conf->speed);
- printk(KERN_INFO "clock=%sternal\n", conf->clock == 8 ? "Ex" : "In");
- printk(KERN_INFO "# level 2 retransm.=%d\n", conf->n2);
- printk(KERN_INFO "level 2 window=%d\n", conf->n2win);
- printk(KERN_INFO "level 3 window=%d\n", conf->n3win);
- printk(KERN_INFO "# logical channels=%d\n", conf->nvc);
- printk(KERN_INFO "level 3 pkt len=%d\n", conf->pktlen);
- printk(KERN_INFO "my address=%d\n", conf->locaddr);
- printk(KERN_INFO "remote address=%d\n", conf->remaddr);
- printk(KERN_INFO "t1=%d seconds\n", conf->t1);
- printk(KERN_INFO "t2=%d seconds\n", conf->t2);
- printk(KERN_INFO "t21=%d seconds\n", conf->t21);
- printk(KERN_INFO "# PVCs=%d\n", conf->npvc);
- printk(KERN_INFO "t23=%d seconds\n", conf->t23);
- printk(KERN_INFO "flags=0x%x\n", conf->flags);
+ pr_info("X.25 configuration\n");
+ pr_info("-----------------\n");
+ pr_info("link number=%d\n", conf->link);
+ pr_info("line speed=%d\n", conf->speed);
+ pr_info("clock=%sternal\n", conf->clock == 8 ? "Ex" : "In");
+ pr_info("# level 2 retransm.=%d\n", conf->n2);
+ pr_info("level 2 window=%d\n", conf->n2win);
+ pr_info("level 3 window=%d\n", conf->n3win);
+ pr_info("# logical channels=%d\n", conf->nvc);
+ pr_info("level 3 pkt len=%d\n", conf->pktlen);
+ pr_info("my address=%d\n", conf->locaddr);
+ pr_info("remote address=%d\n", conf->remaddr);
+ pr_info("t1=%d seconds\n", conf->t1);
+ pr_info("t2=%d seconds\n", conf->t2);
+ pr_info("t21=%d seconds\n", conf->t21);
+ pr_info("# PVCs=%d\n", conf->npvc);
+ pr_info("t23=%d seconds\n", conf->t23);
+ pr_info("flags=0x%x\n", conf->flags);
}
static void cycx_x25_dump_stats(struct cycx_x25_stats *stats)
{
- printk(KERN_INFO "X.25 statistics\n");
- printk(KERN_INFO "--------------\n");
- printk(KERN_INFO "rx_crc_errors=%d\n", stats->rx_crc_errors);
- printk(KERN_INFO "rx_over_errors=%d\n", stats->rx_over_errors);
- printk(KERN_INFO "n2_tx_frames=%d\n", stats->n2_tx_frames);
- printk(KERN_INFO "n2_rx_frames=%d\n", stats->n2_rx_frames);
- printk(KERN_INFO "tx_timeouts=%d\n", stats->tx_timeouts);
- printk(KERN_INFO "rx_timeouts=%d\n", stats->rx_timeouts);
- printk(KERN_INFO "n3_tx_packets=%d\n", stats->n3_tx_packets);
- printk(KERN_INFO "n3_rx_packets=%d\n", stats->n3_rx_packets);
- printk(KERN_INFO "tx_aborts=%d\n", stats->tx_aborts);
- printk(KERN_INFO "rx_aborts=%d\n", stats->rx_aborts);
+ pr_info("X.25 statistics\n");
+ pr_info("--------------\n");
+ pr_info("rx_crc_errors=%d\n", stats->rx_crc_errors);
+ pr_info("rx_over_errors=%d\n", stats->rx_over_errors);
+ pr_info("n2_tx_frames=%d\n", stats->n2_tx_frames);
+ pr_info("n2_rx_frames=%d\n", stats->n2_rx_frames);
+ pr_info("tx_timeouts=%d\n", stats->tx_timeouts);
+ pr_info("rx_timeouts=%d\n", stats->rx_timeouts);
+ pr_info("n3_tx_packets=%d\n", stats->n3_tx_packets);
+ pr_info("n3_rx_packets=%d\n", stats->n3_rx_packets);
+ pr_info("tx_aborts=%d\n", stats->tx_aborts);
+ pr_info("rx_aborts=%d\n", stats->rx_aborts);
}
static void cycx_x25_dump_devs(struct wan_device *wandev)
{
struct net_device *dev = wandev->dev;
- printk(KERN_INFO "X.25 dev states\n");
- printk(KERN_INFO "name: addr: txoff: protocol:\n");
- printk(KERN_INFO "---------------------------------------\n");
+ pr_info("X.25 dev states\n");
+ pr_info("name: addr: txoff: protocol:\n");
+ pr_info("---------------------------------------\n");
while(dev) {
struct cycx_x25_channel *chan = netdev_priv(dev);
- printk(KERN_INFO "%-5.5s %-15.15s %d ETH_P_%s\n",
- chan->name, chan->addr, netif_queue_stopped(dev),
- chan->protocol == ETH_P_IP ? "IP" : "X25");
+ pr_info("%-5.5s %-15.15s %d ETH_P_%s\n",
+ chan->name, chan->addr, netif_queue_stopped(dev),
+ chan->protocol == ETH_P_IP ? "IP" : "X25");
dev = chan->slave;
}
}