|  | /* | 
|  | * MIMC200 board-specific flash initialization | 
|  | * | 
|  | * Copyright (C) 2008 Mercury IMC Ltd | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mtd/mtd.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  | #include <linux/mtd/physmap.h> | 
|  |  | 
|  | #include <mach/smc.h> | 
|  |  | 
|  | static struct smc_timing flash_timing __initdata = { | 
|  | .ncs_read_setup		= 0, | 
|  | .nrd_setup		= 15, | 
|  | .ncs_write_setup	= 0, | 
|  | .nwe_setup		= 0, | 
|  |  | 
|  | .ncs_read_pulse		= 115, | 
|  | .nrd_pulse		= 110, | 
|  | .ncs_write_pulse	= 60, | 
|  | .nwe_pulse		= 60, | 
|  |  | 
|  | .read_cycle		= 115, | 
|  | .write_cycle		= 100, | 
|  | }; | 
|  |  | 
|  | static struct smc_config flash_config __initdata = { | 
|  | .bus_width		= 2, | 
|  | .nrd_controlled		= 1, | 
|  | .nwe_controlled		= 1, | 
|  | .byte_write		= 1, | 
|  | }; | 
|  |  | 
|  | /* system flash definition */ | 
|  |  | 
|  | static struct mtd_partition flash_parts_system[] = { | 
|  | { | 
|  | .name           = "u-boot", | 
|  | .offset         = 0x00000000, | 
|  | .size           = 0x00020000,           /* 128 KiB */ | 
|  | .mask_flags     = MTD_WRITEABLE, | 
|  | }, | 
|  | { | 
|  | .name           = "root", | 
|  | .offset         = 0x00020000, | 
|  | .size           = 0x007c0000, | 
|  | }, | 
|  | { | 
|  | .name		= "splash", | 
|  | .offset		= 0x007e0000, | 
|  | .size		= 0x00010000,		/* 64KiB */ | 
|  | }, | 
|  | { | 
|  | .name           = "env", | 
|  | .offset         = 0x007f0000, | 
|  | .size           = 0x00010000, | 
|  | .mask_flags     = MTD_WRITEABLE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct physmap_flash_data flash_system = { | 
|  | .width		= 2, | 
|  | .nr_parts	= ARRAY_SIZE(flash_parts_system), | 
|  | .parts		= flash_parts_system, | 
|  | }; | 
|  |  | 
|  | static struct resource flash_resource_system = { | 
|  | .start		= 0x00000000, | 
|  | .end		= 0x007fffff, | 
|  | .flags		= IORESOURCE_MEM, | 
|  | }; | 
|  |  | 
|  | static struct platform_device flash_device_system = { | 
|  | .name		= "physmap-flash", | 
|  | .id		= 0, | 
|  | .resource	= &flash_resource_system, | 
|  | .num_resources	= 1, | 
|  | .dev		= { | 
|  | .platform_data = &flash_system, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* data flash definition */ | 
|  |  | 
|  | static struct mtd_partition flash_parts_data[] = { | 
|  | { | 
|  | .name		= "data", | 
|  | .offset		= 0x00000000, | 
|  | .size		= 0x00800000, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct physmap_flash_data flash_data = { | 
|  | .width		= 2, | 
|  | .nr_parts	= ARRAY_SIZE(flash_parts_data), | 
|  | .parts		= flash_parts_data, | 
|  | }; | 
|  |  | 
|  | static struct resource flash_resource_data = { | 
|  | .start		= 0x08000000, | 
|  | .end		= 0x087fffff, | 
|  | .flags		= IORESOURCE_MEM, | 
|  | }; | 
|  |  | 
|  | static struct platform_device flash_device_data = { | 
|  | .name		= "physmap-flash", | 
|  | .id		= 1, | 
|  | .resource	= &flash_resource_data, | 
|  | .num_resources	= 1, | 
|  | .dev		= { | 
|  | .platform_data = &flash_data, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* This needs to be called after the SMC has been initialized */ | 
|  | static int __init mimc200_flash_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | smc_set_timing(&flash_config, &flash_timing); | 
|  | ret = smc_set_configuration(0, &flash_config); | 
|  | if (ret < 0) { | 
|  | printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n"); | 
|  | return ret; | 
|  | } | 
|  | ret = smc_set_configuration(1, &flash_config); | 
|  | if (ret < 0) { | 
|  | printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | platform_device_register(&flash_device_system); | 
|  | platform_device_register(&flash_device_data); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | device_initcall(mimc200_flash_init); |