diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index f9ba96c..23b773f 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -136,6 +136,10 @@
 seconds since the last update). This means that you can easily miss
 once-only alarms.
 
+Out-of-limit readings can also result in beeping, if the chip is properly
+wired and configured. Beeping can be enabled or disabled per sensor type
+(temperatures, voltages and fans.)
+
 The IT87xx only updates its values each 1.5 seconds; reading it more often
 will do no harm, but will return 'old' values.
 
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 7a349e0..d70c6ec 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -128,6 +128,7 @@
 #define IT87_SIO_GPIO5_REG	0x29
 #define IT87_SIO_PINX2_REG	0x2c	/* Pin selection */
 #define IT87_SIO_VID_REG	0xfc	/* VID value */
+#define IT87_SIO_BEEP_PIN_REG	0xf6	/* Beep pin mapping */
 
 /* Update battery voltage after every reading if true */
 static int update_vbat;
@@ -187,6 +188,7 @@
 
 #define IT87_REG_VIN_ENABLE    0x50
 #define IT87_REG_TEMP_ENABLE   0x51
+#define IT87_REG_BEEP_ENABLE   0x5c
 
 #define IT87_REG_CHIPID        0x58
 
@@ -246,6 +248,7 @@
 	/* Values read from Super-I/O config space */
 	u8 revision;
 	u8 vid_value;
+	u8 beep_pin;
 	/* Features skipped based on config or DMI */
 	u8 skip_vid;
 	u8 skip_fan;
@@ -279,6 +282,7 @@
 	u8 vid;			/* Register encoding, combined */
 	u8 vrm;
 	u32 alarms;		/* Register encoding, combined */
+	u8 beeps;		/* Register encoding */
 	u8 fan_main_ctrl;	/* Register value */
 	u8 fan_ctl;		/* Register value */
 
@@ -919,6 +923,55 @@
 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
 
+static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
+}
+static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct it87_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0
+	 || (val != 0 && val != 1))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+	if (val)
+		data->beeps |= (1 << bitnr);
+	else
+		data->beeps &= ~(1 << bitnr);
+	it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
+			  show_beep, set_beep, 1);
+static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
+/* fanX_beep writability is set later */
+static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
+			  show_beep, set_beep, 2);
+static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
+
 static ssize_t
 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1014,6 +1067,26 @@
 	.attrs = it87_attributes,
 };
 
+static struct attribute *it87_attributes_beep[] = {
+	&sensor_dev_attr_in0_beep.dev_attr.attr,
+	&sensor_dev_attr_in1_beep.dev_attr.attr,
+	&sensor_dev_attr_in2_beep.dev_attr.attr,
+	&sensor_dev_attr_in3_beep.dev_attr.attr,
+	&sensor_dev_attr_in4_beep.dev_attr.attr,
+	&sensor_dev_attr_in5_beep.dev_attr.attr,
+	&sensor_dev_attr_in6_beep.dev_attr.attr,
+	&sensor_dev_attr_in7_beep.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_beep.dev_attr.attr,
+	&sensor_dev_attr_temp2_beep.dev_attr.attr,
+	&sensor_dev_attr_temp3_beep.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group it87_group_beep = {
+	.attrs = it87_attributes_beep,
+};
+
 static struct attribute *it87_attributes_fan16[5][3+1] = { {
 	&sensor_dev_attr_fan1_input16.dev_attr.attr,
 	&sensor_dev_attr_fan1_min16.dev_attr.attr,
@@ -1107,6 +1180,14 @@
 	{ .attrs = it87_attributes_pwm[2] },
 };
 
+static struct attribute *it87_attributes_fan_beep[] = {
+	&sensor_dev_attr_fan1_beep.dev_attr.attr,
+	&sensor_dev_attr_fan2_beep.dev_attr.attr,
+	&sensor_dev_attr_fan3_beep.dev_attr.attr,
+	&sensor_dev_attr_fan4_beep.dev_attr.attr,
+	&sensor_dev_attr_fan5_beep.dev_attr.attr,
+};
+
 static struct attribute *it87_attributes_vid[] = {
 	&dev_attr_vrm.attr,
 	&dev_attr_cpu0_vid.attr,
@@ -1174,6 +1255,10 @@
 	if (sio_data->type == it87) {
 		/* The IT8705F doesn't have VID pins at all */
 		sio_data->skip_vid = 1;
+
+		/* The IT8705F has a different LD number for GPIO */
+		superio_select(5);
+		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	} else {
 		int reg;
 
@@ -1207,7 +1292,11 @@
 			pr_info("it87: in3 is VCC (+5V)\n");
 		if (reg & (1 << 1))
 			pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
+
+		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	}
+	if (sio_data->beep_pin)
+		pr_info("it87: Beeping is supported\n");
 
 	/* Disable specific features based on DMI strings */
 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
@@ -1240,10 +1329,15 @@
 	int i;
 
 	sysfs_remove_group(&dev->kobj, &it87_group);
+	if (sio_data->beep_pin)
+		sysfs_remove_group(&dev->kobj, &it87_group_beep);
 	for (i = 0; i < 5; i++) {
 		if (!(data->has_fan & (1 << i)))
 			continue;
 		sysfs_remove_group(&dev->kobj, &fan_group[i]);
+		if (sio_data->beep_pin)
+			sysfs_remove_file(&dev->kobj,
+					  it87_attributes_fan_beep[i]);
 	}
 	for (i = 0; i < 3; i++) {
 		if (sio_data->skip_pwm & (1 << 0))
@@ -1263,6 +1357,7 @@
 	const struct attribute_group *fan_group;
 	int err = 0, i;
 	int enable_pwm_interface;
+	int fan_beep_need_rw;
 	static const char *names[] = {
 		"it87",
 		"it8712",
@@ -1311,14 +1406,40 @@
 	if ((err = sysfs_create_group(&dev->kobj, &it87_group)))
 		goto ERROR2;
 
+	if (sio_data->beep_pin) {
+		err = sysfs_create_group(&dev->kobj, &it87_group_beep);
+		if (err)
+			goto ERROR4;
+	}
+
 	/* Do not create fan files for disabled fans */
 	fan_group = it87_get_fan_group(data);
+	fan_beep_need_rw = 1;
 	for (i = 0; i < 5; i++) {
 		if (!(data->has_fan & (1 << i)))
 			continue;
 		err = sysfs_create_group(&dev->kobj, &fan_group[i]);
 		if (err)
 			goto ERROR4;
+
+		if (sio_data->beep_pin) {
+			err = sysfs_create_file(&dev->kobj,
+						it87_attributes_fan_beep[i]);
+			if (err)
+				goto ERROR4;
+			if (!fan_beep_need_rw)
+				continue;
+
+			/* As we have a single beep enable bit for all fans,
+			 * only the first enabled fan has a writable attribute
+			 * for it. */
+			if (sysfs_chmod_file(&dev->kobj,
+					     it87_attributes_fan_beep[i],
+					     S_IRUGO | S_IWUSR))
+				dev_dbg(dev, "chmod +w fan%d_beep failed\n",
+					i + 1);
+			fan_beep_need_rw = 0;
+		}
 	}
 
 	if (enable_pwm_interface) {
@@ -1608,6 +1729,7 @@
 			it87_read_value(data, IT87_REG_ALARM1) |
 			(it87_read_value(data, IT87_REG_ALARM2) << 8) |
 			(it87_read_value(data, IT87_REG_ALARM3) << 16);
+		data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
 
 		data->fan_main_ctrl = it87_read_value(data,
 				IT87_REG_FAN_MAIN_CTRL);