ARM: dts: imx28: move extra gpmi-nand pins into board dts
Only pins GPMI_CE0N and GPMI_READY0 are generally used by other boards.
Move GPMI_CE1N and GPMI_READY1 into imx28-evk.dts to make gpmi_pins_a
more general, and can be used by other boards.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 0d8739d..0444964 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -24,7 +24,8 @@
apbh@80000000 {
gpmi-nand@8000c000 {
pinctrl-names = "default";
- pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+ &gpmi_pins_evk>;
status = "okay";
};
@@ -64,6 +65,17 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ gpmi_pins_evk: gpmi-nand-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
+ 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
};
lcdif@80030000 {