iwlegacy: rename il_{read,write}_prph
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c
index 7b422f2..a745032 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965.c
@@ -72,11 +72,11 @@
D_INFO("Begin verify bsm\n");
/* verify BSM SRAM contents */
- val = il_read_prph(il, BSM_WR_DWCOUNT_REG);
+ val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
for (reg = BSM_SRAM_LOWER_BOUND;
reg < BSM_SRAM_LOWER_BOUND + len;
reg += sizeof(u32), image++) {
- val = il_read_prph(il, reg);
+ val = il_rd_prph(il, reg);
if (val != le32_to_cpu(*image)) {
IL_ERR("BSM uCode verification failed at "
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
@@ -156,34 +156,34 @@
inst_len = il->ucode_init.len;
data_len = il->ucode_init_data.len;
- il_write_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
- il_write_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
- il_write_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
- il_write_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
+ il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
+ il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
+ il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
+ il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
/* Fill BSM memory with bootstrap instructions */
for (reg_offset = BSM_SRAM_LOWER_BOUND;
reg_offset < BSM_SRAM_LOWER_BOUND + len;
reg_offset += sizeof(u32), image++)
- _il_write_prph(il, reg_offset, le32_to_cpu(*image));
+ _il_wr_prph(il, reg_offset, le32_to_cpu(*image));
ret = il4965_verify_bsm(il);
if (ret)
return ret;
/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
- il_write_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
- il_write_prph(il,
+ il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
+ il_wr_prph(il,
BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND);
- il_write_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
+ il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
/* Load bootstrap code into instruction SRAM now,
* to prepare to load "initialize" uCode */
- il_write_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
+ il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
/* Wait for load of bootstrap uCode to finish */
for (i = 0; i < 100; i++) {
- done = il_read_prph(il, BSM_WR_CTRL_REG);
+ done = il_rd_prph(il, BSM_WR_CTRL_REG);
if (!(done & BSM_WR_CTRL_REG_BIT_START))
break;
udelay(10);
@@ -197,7 +197,7 @@
/* Enable future boot loads whenever power management unit triggers it
* (e.g. when powering back up after power-save shutdown) */
- il_write_prph(il,
+ il_wr_prph(il,
BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
@@ -224,14 +224,14 @@
pdata = il->ucode_data_backup.p_addr >> 4;
/* Tell bootstrap uCode where to find image to load */
- il_write_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
- il_write_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
- il_write_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
+ il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
+ il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
+ il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
il->ucode_data.len);
/* Inst byte count must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
- il_write_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
+ il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
il->ucode_code.len | BSM_DRAM_INST_LOAD);
D_INFO("Runtime uCode pointers are set.\n");