|  | /* | 
|  | *  Copyright (C) 1994-1998	   Linus Torvalds & authors (see below) | 
|  | *  Copyright (C) 1998-2002	   Linux ATA Development | 
|  | *				      Andre Hedrick <andre@linux-ide.org> | 
|  | *  Copyright (C) 2003		   Red Hat <alan@redhat.com> | 
|  | *  Copyright (C) 2003-2005, 2007  Bartlomiej Zolnierkiewicz | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *  Mostly written by Mark Lord <mlord@pobox.com> | 
|  | *                and Gadi Oxman <gadio@netvision.net.il> | 
|  | *                and Andre Hedrick <andre@linux-ide.org> | 
|  | * | 
|  | * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. | 
|  | */ | 
|  |  | 
|  | #define IDEDISK_VERSION	"1.18" | 
|  |  | 
|  | //#define DEBUG | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/major.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/genhd.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/leds.h> | 
|  |  | 
|  | #define _IDE_DISK | 
|  |  | 
|  | #include <linux/ide.h> | 
|  |  | 
|  | #include <asm/byteorder.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/div64.h> | 
|  |  | 
|  | struct ide_disk_obj { | 
|  | ide_drive_t	*drive; | 
|  | ide_driver_t	*driver; | 
|  | struct gendisk	*disk; | 
|  | struct kref	kref; | 
|  | unsigned int	openers;	/* protected by BKL for now */ | 
|  | }; | 
|  |  | 
|  | static DEFINE_MUTEX(idedisk_ref_mutex); | 
|  |  | 
|  | #define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref) | 
|  |  | 
|  | #define ide_disk_g(disk) \ | 
|  | container_of((disk)->private_data, struct ide_disk_obj, driver) | 
|  |  | 
|  | static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) | 
|  | { | 
|  | struct ide_disk_obj *idkp = NULL; | 
|  |  | 
|  | mutex_lock(&idedisk_ref_mutex); | 
|  | idkp = ide_disk_g(disk); | 
|  | if (idkp) | 
|  | kref_get(&idkp->kref); | 
|  | mutex_unlock(&idedisk_ref_mutex); | 
|  | return idkp; | 
|  | } | 
|  |  | 
|  | static void ide_disk_release(struct kref *); | 
|  |  | 
|  | static void ide_disk_put(struct ide_disk_obj *idkp) | 
|  | { | 
|  | mutex_lock(&idedisk_ref_mutex); | 
|  | kref_put(&idkp->kref, ide_disk_release); | 
|  | mutex_unlock(&idedisk_ref_mutex); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" | 
|  | * value for this drive (from its reported identification information). | 
|  | * | 
|  | * Returns:	1 if lba_capacity looks sensible | 
|  | *		0 otherwise | 
|  | * | 
|  | * It is called only once for each drive. | 
|  | */ | 
|  | static int lba_capacity_is_ok (struct hd_driveid *id) | 
|  | { | 
|  | unsigned long lba_sects, chs_sects, head, tail; | 
|  |  | 
|  | /* No non-LBA info .. so valid! */ | 
|  | if (id->cyls == 0) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * The ATA spec tells large drives to return | 
|  | * C/H/S = 16383/16/63 independent of their size. | 
|  | * Some drives can be jumpered to use 15 heads instead of 16. | 
|  | * Some drives can be jumpered to use 4092 cyls instead of 16383. | 
|  | */ | 
|  | if ((id->cyls == 16383 | 
|  | || (id->cyls == 4092 && id->cur_cyls == 16383)) && | 
|  | id->sectors == 63 && | 
|  | (id->heads == 15 || id->heads == 16) && | 
|  | (id->lba_capacity >= 16383*63*id->heads)) | 
|  | return 1; | 
|  |  | 
|  | lba_sects   = id->lba_capacity; | 
|  | chs_sects   = id->cyls * id->heads * id->sectors; | 
|  |  | 
|  | /* perform a rough sanity check on lba_sects:  within 10% is OK */ | 
|  | if ((lba_sects - chs_sects) < chs_sects/10) | 
|  | return 1; | 
|  |  | 
|  | /* some drives have the word order reversed */ | 
|  | head = ((lba_sects >> 16) & 0xffff); | 
|  | tail = (lba_sects & 0xffff); | 
|  | lba_sects = (head | (tail << 16)); | 
|  | if ((lba_sects - chs_sects) < chs_sects/10) { | 
|  | id->lba_capacity = lba_sects; | 
|  | return 1;	/* lba_capacity is (now) good */ | 
|  | } | 
|  |  | 
|  | return 0;	/* lba_capacity value may be bad */ | 
|  | } | 
|  |  | 
|  | static const u8 ide_rw_cmds[] = { | 
|  | WIN_MULTREAD, | 
|  | WIN_MULTWRITE, | 
|  | WIN_MULTREAD_EXT, | 
|  | WIN_MULTWRITE_EXT, | 
|  | WIN_READ, | 
|  | WIN_WRITE, | 
|  | WIN_READ_EXT, | 
|  | WIN_WRITE_EXT, | 
|  | WIN_READDMA, | 
|  | WIN_WRITEDMA, | 
|  | WIN_READDMA_EXT, | 
|  | WIN_WRITEDMA_EXT, | 
|  | }; | 
|  |  | 
|  | static const u8 ide_data_phases[] = { | 
|  | TASKFILE_MULTI_IN, | 
|  | TASKFILE_MULTI_OUT, | 
|  | TASKFILE_IN, | 
|  | TASKFILE_OUT, | 
|  | TASKFILE_IN_DMA, | 
|  | TASKFILE_OUT_DMA, | 
|  | }; | 
|  |  | 
|  | static void ide_tf_set_cmd(ide_drive_t *drive, ide_task_t *task, u8 dma) | 
|  | { | 
|  | u8 index, lba48, write; | 
|  |  | 
|  | lba48 = (task->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0; | 
|  | write = (task->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0; | 
|  |  | 
|  | if (dma) | 
|  | index = drive->vdma ? 4 : 8; | 
|  | else | 
|  | index = drive->mult_count ? 0 : 4; | 
|  |  | 
|  | task->tf.command = ide_rw_cmds[index + lba48 + write]; | 
|  |  | 
|  | if (dma) | 
|  | index = 8; /* fixup index */ | 
|  |  | 
|  | task->data_phase = ide_data_phases[index / 2 + write]; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * __ide_do_rw_disk() issues READ and WRITE commands to a disk, | 
|  | * using LBA if supported, or CHS otherwise, to address sectors. | 
|  | */ | 
|  | static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) | 
|  | { | 
|  | ide_hwif_t *hwif	= HWIF(drive); | 
|  | unsigned int dma	= drive->using_dma; | 
|  | u16 nsectors		= (u16)rq->nr_sectors; | 
|  | u8 lba48		= (drive->addressing == 1) ? 1 : 0; | 
|  | ide_task_t		task; | 
|  | struct ide_taskfile	*tf = &task.tf; | 
|  | ide_startstop_t		rc; | 
|  |  | 
|  | if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) { | 
|  | if (block + rq->nr_sectors > 1ULL << 28) | 
|  | dma = 0; | 
|  | else | 
|  | lba48 = 0; | 
|  | } | 
|  |  | 
|  | if (!dma) { | 
|  | ide_init_sg_cmd(drive, rq); | 
|  | ide_map_sg(drive, rq); | 
|  | } | 
|  |  | 
|  | memset(&task, 0, sizeof(task)); | 
|  | task.tf_flags = IDE_TFLAG_NO_SELECT_MASK;  /* FIXME? */ | 
|  | task.tf_flags |= (IDE_TFLAG_TF | IDE_TFLAG_DEVICE); | 
|  |  | 
|  | if (drive->select.b.lba) { | 
|  | if (lba48) { | 
|  | pr_debug("%s: LBA=0x%012llx\n", drive->name, | 
|  | (unsigned long long)block); | 
|  |  | 
|  | tf->hob_nsect = (nsectors >> 8) & 0xff; | 
|  | tf->hob_lbal  = (u8)(block >> 24); | 
|  | if (sizeof(block) != 4) { | 
|  | tf->hob_lbam = (u8)((u64)block >> 32); | 
|  | tf->hob_lbah = (u8)((u64)block >> 40); | 
|  | } | 
|  |  | 
|  | tf->nsect  = nsectors & 0xff; | 
|  | tf->lbal   = (u8) block; | 
|  | tf->lbam   = (u8)(block >>  8); | 
|  | tf->lbah   = (u8)(block >> 16); | 
|  |  | 
|  | task.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); | 
|  | } else { | 
|  | tf->nsect  = nsectors & 0xff; | 
|  | tf->lbal   = block; | 
|  | tf->lbam   = block >>= 8; | 
|  | tf->lbah   = block >>= 8; | 
|  | tf->device = (block >> 8) & 0xf; | 
|  | } | 
|  | } else { | 
|  | unsigned int sect,head,cyl,track; | 
|  | track = (int)block / drive->sect; | 
|  | sect  = (int)block % drive->sect + 1; | 
|  | head  = track % drive->head; | 
|  | cyl   = track / drive->head; | 
|  |  | 
|  | pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); | 
|  |  | 
|  | tf->nsect  = nsectors & 0xff; | 
|  | tf->lbal   = sect; | 
|  | tf->lbam   = cyl; | 
|  | tf->lbah   = cyl >> 8; | 
|  | tf->device = head; | 
|  | } | 
|  |  | 
|  | if (rq_data_dir(rq)) | 
|  | task.tf_flags |= IDE_TFLAG_WRITE; | 
|  |  | 
|  | ide_tf_set_cmd(drive, &task, dma); | 
|  | if (!dma) | 
|  | hwif->data_phase = task.data_phase; | 
|  | task.rq = rq; | 
|  |  | 
|  | rc = do_rw_taskfile(drive, &task); | 
|  |  | 
|  | if (rc == ide_stopped && dma) { | 
|  | /* fallback to PIO */ | 
|  | task.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK; | 
|  | ide_tf_set_cmd(drive, &task, 0); | 
|  | hwif->data_phase = task.data_phase; | 
|  | ide_init_sg_cmd(drive, rq); | 
|  | rc = do_rw_taskfile(drive, &task); | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * 268435455  == 137439 MB or 28bit limit | 
|  | * 320173056  == 163929 MB or 48bit addressing | 
|  | * 1073741822 == 549756 MB or 48bit addressing fake drive | 
|  | */ | 
|  |  | 
|  | static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) | 
|  | { | 
|  | ide_hwif_t *hwif = HWIF(drive); | 
|  |  | 
|  | BUG_ON(drive->blocked); | 
|  |  | 
|  | if (!blk_fs_request(rq)) { | 
|  | blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command"); | 
|  | ide_end_request(drive, 0, 0); | 
|  | return ide_stopped; | 
|  | } | 
|  |  | 
|  | ledtrig_ide_activity(); | 
|  |  | 
|  | pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n", | 
|  | drive->name, rq_data_dir(rq) == READ ? "read" : "writ", | 
|  | (unsigned long long)block, rq->nr_sectors, | 
|  | (unsigned long)rq->buffer); | 
|  |  | 
|  | if (hwif->rw_disk) | 
|  | hwif->rw_disk(drive, rq); | 
|  |  | 
|  | return __ide_do_rw_disk(drive, rq, block); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Queries for true maximum capacity of the drive. | 
|  | * Returns maximum LBA address (> 0) of the drive, 0 if failed. | 
|  | */ | 
|  | static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) | 
|  | { | 
|  | ide_task_t args; | 
|  | struct ide_taskfile *tf = &args.tf; | 
|  | u64 addr = 0; | 
|  |  | 
|  | /* Create IDE/ATA command request structure */ | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | if (lba48) | 
|  | tf->command = WIN_READ_NATIVE_MAX_EXT; | 
|  | else | 
|  | tf->command = WIN_READ_NATIVE_MAX; | 
|  | tf->device  = ATA_LBA; | 
|  | args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | 
|  | if (lba48) | 
|  | args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); | 
|  | /* submit command request */ | 
|  | ide_no_data_taskfile(drive, &args); | 
|  |  | 
|  | /* if OK, compute maximum address value */ | 
|  | if ((tf->status & 0x01) == 0) | 
|  | addr = ide_get_lba_addr(tf, lba48) + 1; | 
|  |  | 
|  | return addr; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sets maximum virtual LBA address of the drive. | 
|  | * Returns new maximum virtual LBA address (> 0) or 0 on failure. | 
|  | */ | 
|  | static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) | 
|  | { | 
|  | ide_task_t args; | 
|  | struct ide_taskfile *tf = &args.tf; | 
|  | u64 addr_set = 0; | 
|  |  | 
|  | addr_req--; | 
|  | /* Create IDE/ATA command request structure */ | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | tf->lbal     = (addr_req >>  0) & 0xff; | 
|  | tf->lbam     = (addr_req >>= 8) & 0xff; | 
|  | tf->lbah     = (addr_req >>= 8) & 0xff; | 
|  | if (lba48) { | 
|  | tf->hob_lbal = (addr_req >>= 8) & 0xff; | 
|  | tf->hob_lbam = (addr_req >>= 8) & 0xff; | 
|  | tf->hob_lbah = (addr_req >>= 8) & 0xff; | 
|  | tf->command  = WIN_SET_MAX_EXT; | 
|  | } else { | 
|  | tf->device   = (addr_req >>= 8) & 0x0f; | 
|  | tf->command  = WIN_SET_MAX; | 
|  | } | 
|  | tf->device |= ATA_LBA; | 
|  | args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | 
|  | if (lba48) | 
|  | args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); | 
|  | /* submit command request */ | 
|  | ide_no_data_taskfile(drive, &args); | 
|  | /* if OK, compute maximum address value */ | 
|  | if ((tf->status & 0x01) == 0) | 
|  | addr_set = ide_get_lba_addr(tf, lba48) + 1; | 
|  |  | 
|  | return addr_set; | 
|  | } | 
|  |  | 
|  | static unsigned long long sectors_to_MB(unsigned long long n) | 
|  | { | 
|  | n <<= 9;		/* make it bytes */ | 
|  | do_div(n, 1000000);	/* make it MB */ | 
|  | return n; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Bits 10 of command_set_1 and cfs_enable_1 must be equal, | 
|  | * so on non-buggy drives we need test only one. | 
|  | * However, we should also check whether these fields are valid. | 
|  | */ | 
|  | static inline int idedisk_supports_hpa(const struct hd_driveid *id) | 
|  | { | 
|  | return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The same here. | 
|  | */ | 
|  | static inline int idedisk_supports_lba48(const struct hd_driveid *id) | 
|  | { | 
|  | return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) | 
|  | && id->lba_capacity_2; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Some disks report total number of sectors instead of | 
|  | * maximum sector address.  We list them here. | 
|  | */ | 
|  | static const struct drive_list_entry hpa_list[] = { | 
|  | { "ST340823A",	NULL }, | 
|  | { "ST320413A",	NULL }, | 
|  | { "ST310211A",	NULL }, | 
|  | { NULL,		NULL } | 
|  | }; | 
|  |  | 
|  | static void idedisk_check_hpa(ide_drive_t *drive) | 
|  | { | 
|  | unsigned long long capacity, set_max; | 
|  | int lba48 = idedisk_supports_lba48(drive->id); | 
|  |  | 
|  | capacity = drive->capacity64; | 
|  |  | 
|  | set_max = idedisk_read_native_max_address(drive, lba48); | 
|  |  | 
|  | if (ide_in_drive_list(drive->id, hpa_list)) { | 
|  | /* | 
|  | * Since we are inclusive wrt to firmware revisions do this | 
|  | * extra check and apply the workaround only when needed. | 
|  | */ | 
|  | if (set_max == capacity + 1) | 
|  | set_max--; | 
|  | } | 
|  |  | 
|  | if (set_max <= capacity) | 
|  | return; | 
|  |  | 
|  | printk(KERN_INFO "%s: Host Protected Area detected.\n" | 
|  | "\tcurrent capacity is %llu sectors (%llu MB)\n" | 
|  | "\tnative  capacity is %llu sectors (%llu MB)\n", | 
|  | drive->name, | 
|  | capacity, sectors_to_MB(capacity), | 
|  | set_max, sectors_to_MB(set_max)); | 
|  |  | 
|  | set_max = idedisk_set_max_address(drive, set_max, lba48); | 
|  |  | 
|  | if (set_max) { | 
|  | drive->capacity64 = set_max; | 
|  | printk(KERN_INFO "%s: Host Protected Area disabled.\n", | 
|  | drive->name); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Compute drive->capacity, the full capacity of the drive | 
|  | * Called with drive->id != NULL. | 
|  | * | 
|  | * To compute capacity, this uses either of | 
|  | * | 
|  | *    1. CHS value set by user       (whatever user sets will be trusted) | 
|  | *    2. LBA value from target drive (require new ATA feature) | 
|  | *    3. LBA value from system BIOS  (new one is OK, old one may break) | 
|  | *    4. CHS value from system BIOS  (traditional style) | 
|  | * | 
|  | * in above order (i.e., if value of higher priority is available, | 
|  | * reset will be ignored). | 
|  | */ | 
|  | static void init_idedisk_capacity (ide_drive_t  *drive) | 
|  | { | 
|  | struct hd_driveid *id = drive->id; | 
|  | /* | 
|  | * If this drive supports the Host Protected Area feature set, | 
|  | * then we may need to change our opinion about the drive's capacity. | 
|  | */ | 
|  | int hpa = idedisk_supports_hpa(id); | 
|  |  | 
|  | if (idedisk_supports_lba48(id)) { | 
|  | /* drive speaks 48-bit LBA */ | 
|  | drive->select.b.lba = 1; | 
|  | drive->capacity64 = id->lba_capacity_2; | 
|  | if (hpa) | 
|  | idedisk_check_hpa(drive); | 
|  | } else if ((id->capability & 2) && lba_capacity_is_ok(id)) { | 
|  | /* drive speaks 28-bit LBA */ | 
|  | drive->select.b.lba = 1; | 
|  | drive->capacity64 = id->lba_capacity; | 
|  | if (hpa) | 
|  | idedisk_check_hpa(drive); | 
|  | } else { | 
|  | /* drive speaks boring old 28-bit CHS */ | 
|  | drive->capacity64 = drive->cyl * drive->head * drive->sect; | 
|  | } | 
|  | } | 
|  |  | 
|  | static sector_t idedisk_capacity (ide_drive_t *drive) | 
|  | { | 
|  | return drive->capacity64 - drive->sect0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IDE_PROC_FS | 
|  | static int smart_enable(ide_drive_t *drive) | 
|  | { | 
|  | ide_task_t args; | 
|  | struct ide_taskfile *tf = &args.tf; | 
|  |  | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | tf->feature = SMART_ENABLE; | 
|  | tf->lbam    = SMART_LCYL_PASS; | 
|  | tf->lbah    = SMART_HCYL_PASS; | 
|  | tf->command = WIN_SMART; | 
|  | args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | 
|  | return ide_no_data_taskfile(drive, &args); | 
|  | } | 
|  |  | 
|  | static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) | 
|  | { | 
|  | ide_task_t args; | 
|  | struct ide_taskfile *tf = &args.tf; | 
|  |  | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | tf->feature = sub_cmd; | 
|  | tf->nsect   = 0x01; | 
|  | tf->lbam    = SMART_LCYL_PASS; | 
|  | tf->lbah    = SMART_HCYL_PASS; | 
|  | tf->command = WIN_SMART; | 
|  | args.tf_flags	= IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | 
|  | args.data_phase	= TASKFILE_IN; | 
|  | (void) smart_enable(drive); | 
|  | return ide_raw_taskfile(drive, &args, buf, 1); | 
|  | } | 
|  |  | 
|  | static int proc_idedisk_read_cache | 
|  | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *) data; | 
|  | char		*out = page; | 
|  | int		len; | 
|  |  | 
|  | if (drive->id_read) | 
|  | len = sprintf(out,"%i\n", drive->id->buf_size / 2); | 
|  | else | 
|  | len = sprintf(out,"(none)\n"); | 
|  | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | } | 
|  |  | 
|  | static int proc_idedisk_read_capacity | 
|  | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | { | 
|  | ide_drive_t*drive = (ide_drive_t *)data; | 
|  | int len; | 
|  |  | 
|  | len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive)); | 
|  | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | } | 
|  |  | 
|  | static int proc_idedisk_read_smart_thresholds | 
|  | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *)data; | 
|  | int		len = 0, i = 0; | 
|  |  | 
|  | if (get_smart_data(drive, page, SMART_READ_THRESHOLDS) == 0) { | 
|  | unsigned short *val = (unsigned short *) page; | 
|  | char *out = ((char *)val) + (SECTOR_WORDS * 4); | 
|  | page = out; | 
|  | do { | 
|  | out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | 
|  | val += 1; | 
|  | } while (i < (SECTOR_WORDS * 2)); | 
|  | len = out - page; | 
|  | } | 
|  | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | } | 
|  |  | 
|  | static int proc_idedisk_read_smart_values | 
|  | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *)data; | 
|  | int		len = 0, i = 0; | 
|  |  | 
|  | if (get_smart_data(drive, page, SMART_READ_VALUES) == 0) { | 
|  | unsigned short *val = (unsigned short *) page; | 
|  | char *out = ((char *)val) + (SECTOR_WORDS * 4); | 
|  | page = out; | 
|  | do { | 
|  | out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | 
|  | val += 1; | 
|  | } while (i < (SECTOR_WORDS * 2)); | 
|  | len = out - page; | 
|  | } | 
|  | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | } | 
|  |  | 
|  | static ide_proc_entry_t idedisk_proc[] = { | 
|  | { "cache",		S_IFREG|S_IRUGO,	proc_idedisk_read_cache,		NULL }, | 
|  | { "capacity",		S_IFREG|S_IRUGO,	proc_idedisk_read_capacity,		NULL }, | 
|  | { "geometry",		S_IFREG|S_IRUGO,	proc_ide_read_geometry,			NULL }, | 
|  | { "smart_values",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_values,		NULL }, | 
|  | { "smart_thresholds",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_thresholds,	NULL }, | 
|  | { NULL, 0, NULL, NULL } | 
|  | }; | 
|  | #endif	/* CONFIG_IDE_PROC_FS */ | 
|  |  | 
|  | static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) | 
|  | { | 
|  | ide_drive_t *drive = q->queuedata; | 
|  | ide_task_t *task = kmalloc(sizeof(*task), GFP_ATOMIC); | 
|  |  | 
|  | /* FIXME: map struct ide_taskfile on rq->cmd[] */ | 
|  | BUG_ON(task == NULL); | 
|  |  | 
|  | memset(task, 0, sizeof(*task)); | 
|  | if (ide_id_has_flush_cache_ext(drive->id) && | 
|  | (drive->capacity64 >= (1UL << 28))) | 
|  | task->tf.command = WIN_FLUSH_CACHE_EXT; | 
|  | else | 
|  | task->tf.command = WIN_FLUSH_CACHE; | 
|  | task->tf_flags	 = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE | | 
|  | IDE_TFLAG_DYN; | 
|  | task->data_phase = TASKFILE_NO_DATA; | 
|  |  | 
|  | rq->cmd_type = REQ_TYPE_ATA_TASKFILE; | 
|  | rq->cmd_flags |= REQ_SOFTBARRIER; | 
|  | rq->special = task; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is tightly woven into the driver->do_special can not touch. | 
|  | * DON'T do it again until a total personality rewrite is committed. | 
|  | */ | 
|  | static int set_multcount(ide_drive_t *drive, int arg) | 
|  | { | 
|  | struct request rq; | 
|  |  | 
|  | if (arg < 0 || arg > drive->id->max_multsect) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (drive->special.b.set_multmode) | 
|  | return -EBUSY; | 
|  |  | 
|  | ide_init_drive_cmd (&rq); | 
|  | rq.cmd_type = REQ_TYPE_ATA_TASKFILE; | 
|  |  | 
|  | drive->mult_req = arg; | 
|  | drive->special.b.set_multmode = 1; | 
|  | (void) ide_do_drive_cmd (drive, &rq, ide_wait); | 
|  | return (drive->mult_count == arg) ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | static int set_nowerr(ide_drive_t *drive, int arg) | 
|  | { | 
|  | if (arg < 0 || arg > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (ide_spin_wait_hwgroup(drive)) | 
|  | return -EBUSY; | 
|  | drive->nowerr = arg; | 
|  | drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; | 
|  | spin_unlock_irq(&ide_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void update_ordered(ide_drive_t *drive) | 
|  | { | 
|  | struct hd_driveid *id = drive->id; | 
|  | unsigned ordered = QUEUE_ORDERED_NONE; | 
|  | prepare_flush_fn *prep_fn = NULL; | 
|  |  | 
|  | if (drive->wcache) { | 
|  | unsigned long long capacity; | 
|  | int barrier; | 
|  | /* | 
|  | * We must avoid issuing commands a drive does not | 
|  | * understand or we may crash it. We check flush cache | 
|  | * is supported. We also check we have the LBA48 flush | 
|  | * cache if the drive capacity is too large. By this | 
|  | * time we have trimmed the drive capacity if LBA48 is | 
|  | * not available so we don't need to recheck that. | 
|  | */ | 
|  | capacity = idedisk_capacity(drive); | 
|  | barrier = ide_id_has_flush_cache(id) && !drive->noflush && | 
|  | (drive->addressing == 0 || capacity <= (1ULL << 28) || | 
|  | ide_id_has_flush_cache_ext(id)); | 
|  |  | 
|  | printk(KERN_INFO "%s: cache flushes %ssupported\n", | 
|  | drive->name, barrier ? "" : "not "); | 
|  |  | 
|  | if (barrier) { | 
|  | ordered = QUEUE_ORDERED_DRAIN_FLUSH; | 
|  | prep_fn = idedisk_prepare_flush; | 
|  | } | 
|  | } else | 
|  | ordered = QUEUE_ORDERED_DRAIN; | 
|  |  | 
|  | blk_queue_ordered(drive->queue, ordered, prep_fn); | 
|  | } | 
|  |  | 
|  | static int write_cache(ide_drive_t *drive, int arg) | 
|  | { | 
|  | ide_task_t args; | 
|  | int err = 1; | 
|  |  | 
|  | if (arg < 0 || arg > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (ide_id_has_flush_cache(drive->id)) { | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tf.feature = arg ? | 
|  | SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; | 
|  | args.tf.command = WIN_SETFEATURES; | 
|  | args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | 
|  | err = ide_no_data_taskfile(drive, &args); | 
|  | if (err == 0) | 
|  | drive->wcache = arg; | 
|  | } | 
|  |  | 
|  | update_ordered(drive); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int do_idedisk_flushcache (ide_drive_t *drive) | 
|  | { | 
|  | ide_task_t args; | 
|  |  | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | if (ide_id_has_flush_cache_ext(drive->id)) | 
|  | args.tf.command = WIN_FLUSH_CACHE_EXT; | 
|  | else | 
|  | args.tf.command = WIN_FLUSH_CACHE; | 
|  | args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | 
|  | return ide_no_data_taskfile(drive, &args); | 
|  | } | 
|  |  | 
|  | static int set_acoustic (ide_drive_t *drive, int arg) | 
|  | { | 
|  | ide_task_t args; | 
|  |  | 
|  | if (arg < 0 || arg > 254) | 
|  | return -EINVAL; | 
|  |  | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tf.feature = arg ? SETFEATURES_EN_AAM : SETFEATURES_DIS_AAM; | 
|  | args.tf.nsect   = arg; | 
|  | args.tf.command = WIN_SETFEATURES; | 
|  | args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | 
|  | ide_no_data_taskfile(drive, &args); | 
|  | drive->acoustic = arg; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * drive->addressing: | 
|  | *	0: 28-bit | 
|  | *	1: 48-bit | 
|  | *	2: 48-bit capable doing 28-bit | 
|  | */ | 
|  | static int set_lba_addressing(ide_drive_t *drive, int arg) | 
|  | { | 
|  | if (arg < 0 || arg > 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | drive->addressing =  0; | 
|  |  | 
|  | if (drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) | 
|  | return 0; | 
|  |  | 
|  | if (!idedisk_supports_lba48(drive->id)) | 
|  | return -EIO; | 
|  | drive->addressing = arg; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IDE_PROC_FS | 
|  | static void idedisk_add_settings(ide_drive_t *drive) | 
|  | { | 
|  | struct hd_driveid *id = drive->id; | 
|  |  | 
|  | ide_add_setting(drive,	"bios_cyl",	SETTING_RW,	TYPE_INT,	0,	65535,			1,	1,	&drive->bios_cyl,	NULL); | 
|  | ide_add_setting(drive,	"bios_head",	SETTING_RW,	TYPE_BYTE,	0,	255,			1,	1,	&drive->bios_head,	NULL); | 
|  | ide_add_setting(drive,	"bios_sect",	SETTING_RW,	TYPE_BYTE,	0,	63,			1,	1,	&drive->bios_sect,	NULL); | 
|  | ide_add_setting(drive,	"address",	SETTING_RW,	TYPE_BYTE,	0,	2,			1,	1,	&drive->addressing,	set_lba_addressing); | 
|  | ide_add_setting(drive,	"multcount",	SETTING_RW,	TYPE_BYTE,	0,	id->max_multsect,	1,	1,	&drive->mult_count,	set_multcount); | 
|  | ide_add_setting(drive,	"nowerr",	SETTING_RW,	TYPE_BYTE,	0,	1,			1,	1,	&drive->nowerr,		set_nowerr); | 
|  | ide_add_setting(drive,	"lun",		SETTING_RW,	TYPE_INT,	0,	7,			1,	1,	&drive->lun,		NULL); | 
|  | ide_add_setting(drive,	"wcache",	SETTING_RW,	TYPE_BYTE,	0,	1,			1,	1,	&drive->wcache,		write_cache); | 
|  | ide_add_setting(drive,	"acoustic",	SETTING_RW,	TYPE_BYTE,	0,	254,			1,	1,	&drive->acoustic,	set_acoustic); | 
|  | ide_add_setting(drive,	"failures",	SETTING_RW,	TYPE_INT,	0,	65535,			1,	1,	&drive->failures,	NULL); | 
|  | ide_add_setting(drive,	"max_failures",	SETTING_RW,	TYPE_INT,	0,	65535,			1,	1,	&drive->max_failures,	NULL); | 
|  | } | 
|  | #else | 
|  | static inline void idedisk_add_settings(ide_drive_t *drive) { ; } | 
|  | #endif | 
|  |  | 
|  | static void idedisk_setup (ide_drive_t *drive) | 
|  | { | 
|  | ide_hwif_t *hwif = drive->hwif; | 
|  | struct hd_driveid *id = drive->id; | 
|  | unsigned long long capacity; | 
|  |  | 
|  | idedisk_add_settings(drive); | 
|  |  | 
|  | if (drive->id_read == 0) | 
|  | return; | 
|  |  | 
|  | if (drive->removable) { | 
|  | /* | 
|  | * Removable disks (eg. SYQUEST); ignore 'WD' drives | 
|  | */ | 
|  | if (id->model[0] != 'W' || id->model[1] != 'D') { | 
|  | drive->doorlocking = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | (void)set_lba_addressing(drive, 1); | 
|  |  | 
|  | if (drive->addressing == 1) { | 
|  | int max_s = 2048; | 
|  |  | 
|  | if (max_s > hwif->rqsize) | 
|  | max_s = hwif->rqsize; | 
|  |  | 
|  | blk_queue_max_sectors(drive->queue, max_s); | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2); | 
|  |  | 
|  | /* calculate drive capacity, and select LBA if possible */ | 
|  | init_idedisk_capacity (drive); | 
|  |  | 
|  | /* limit drive capacity to 137GB if LBA48 cannot be used */ | 
|  | if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) { | 
|  | printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " | 
|  | "%llu sectors (%llu MB)\n", | 
|  | drive->name, (unsigned long long)drive->capacity64, | 
|  | sectors_to_MB(drive->capacity64)); | 
|  | drive->capacity64 = 1ULL << 28; | 
|  | } | 
|  |  | 
|  | if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && drive->addressing) { | 
|  | if (drive->capacity64 > 1ULL << 28) { | 
|  | printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will" | 
|  | " be used for accessing sectors > %u\n", | 
|  | drive->name, 1 << 28); | 
|  | } else | 
|  | drive->addressing = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * if possible, give fdisk access to more of the drive, | 
|  | * by correcting bios_cyls: | 
|  | */ | 
|  | capacity = idedisk_capacity (drive); | 
|  | if (!drive->forced_geom) { | 
|  |  | 
|  | if (idedisk_supports_lba48(drive->id)) { | 
|  | /* compatibility */ | 
|  | drive->bios_sect = 63; | 
|  | drive->bios_head = 255; | 
|  | } | 
|  |  | 
|  | if (drive->bios_sect && drive->bios_head) { | 
|  | unsigned int cap0 = capacity; /* truncate to 32 bits */ | 
|  | unsigned int cylsz, cyl; | 
|  |  | 
|  | if (cap0 != capacity) | 
|  | drive->bios_cyl = 65535; | 
|  | else { | 
|  | cylsz = drive->bios_sect * drive->bios_head; | 
|  | cyl = cap0 / cylsz; | 
|  | if (cyl > 65535) | 
|  | cyl = 65535; | 
|  | if (cyl > drive->bios_cyl) | 
|  | drive->bios_cyl = cyl; | 
|  | } | 
|  | } | 
|  | } | 
|  | printk(KERN_INFO "%s: %llu sectors (%llu MB)", | 
|  | drive->name, capacity, sectors_to_MB(capacity)); | 
|  |  | 
|  | /* Only print cache size when it was specified */ | 
|  | if (id->buf_size) | 
|  | printk(KERN_CONT " w/%dKiB Cache", id->buf_size / 2); | 
|  |  | 
|  | printk(KERN_CONT ", CHS=%d/%d/%d\n", | 
|  | drive->bios_cyl, drive->bios_head, drive->bios_sect); | 
|  |  | 
|  | /* write cache enabled? */ | 
|  | if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) | 
|  | drive->wcache = 1; | 
|  |  | 
|  | write_cache(drive, 1); | 
|  | } | 
|  |  | 
|  | static void ide_cacheflush_p(ide_drive_t *drive) | 
|  | { | 
|  | if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) | 
|  | return; | 
|  |  | 
|  | if (do_idedisk_flushcache(drive)) | 
|  | printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); | 
|  | } | 
|  |  | 
|  | static void ide_disk_remove(ide_drive_t *drive) | 
|  | { | 
|  | struct ide_disk_obj *idkp = drive->driver_data; | 
|  | struct gendisk *g = idkp->disk; | 
|  |  | 
|  | ide_proc_unregister_driver(drive, idkp->driver); | 
|  |  | 
|  | del_gendisk(g); | 
|  |  | 
|  | ide_cacheflush_p(drive); | 
|  |  | 
|  | ide_disk_put(idkp); | 
|  | } | 
|  |  | 
|  | static void ide_disk_release(struct kref *kref) | 
|  | { | 
|  | struct ide_disk_obj *idkp = to_ide_disk(kref); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  | struct gendisk *g = idkp->disk; | 
|  |  | 
|  | drive->driver_data = NULL; | 
|  | g->private_data = NULL; | 
|  | put_disk(g); | 
|  | kfree(idkp); | 
|  | } | 
|  |  | 
|  | static int ide_disk_probe(ide_drive_t *drive); | 
|  |  | 
|  | /* | 
|  | * On HPA drives the capacity needs to be | 
|  | * reinitilized on resume otherwise the disk | 
|  | * can not be used and a hard reset is required | 
|  | */ | 
|  | static void ide_disk_resume(ide_drive_t *drive) | 
|  | { | 
|  | if (idedisk_supports_hpa(drive->id)) | 
|  | init_idedisk_capacity(drive); | 
|  | } | 
|  |  | 
|  | static void ide_device_shutdown(ide_drive_t *drive) | 
|  | { | 
|  | #ifdef	CONFIG_ALPHA | 
|  | /* On Alpha, halt(8) doesn't actually turn the machine off, | 
|  | it puts you into the sort of firmware monitor. Typically, | 
|  | it's used to boot another kernel image, so it's not much | 
|  | different from reboot(8). Therefore, we don't need to | 
|  | spin down the disk in this case, especially since Alpha | 
|  | firmware doesn't handle disks in standby mode properly. | 
|  | On the other hand, it's reasonably safe to turn the power | 
|  | off when the shutdown process reaches the firmware prompt, | 
|  | as the firmware initialization takes rather long time - | 
|  | at least 10 seconds, which should be sufficient for | 
|  | the disk to expire its write cache. */ | 
|  | if (system_state != SYSTEM_POWER_OFF) { | 
|  | #else | 
|  | if (system_state == SYSTEM_RESTART) { | 
|  | #endif | 
|  | ide_cacheflush_p(drive); | 
|  | return; | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "Shutdown: %s\n", drive->name); | 
|  |  | 
|  | drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND); | 
|  | } | 
|  |  | 
|  | static ide_driver_t idedisk_driver = { | 
|  | .gen_driver = { | 
|  | .owner		= THIS_MODULE, | 
|  | .name		= "ide-disk", | 
|  | .bus		= &ide_bus_type, | 
|  | }, | 
|  | .probe			= ide_disk_probe, | 
|  | .remove			= ide_disk_remove, | 
|  | .resume			= ide_disk_resume, | 
|  | .shutdown		= ide_device_shutdown, | 
|  | .version		= IDEDISK_VERSION, | 
|  | .media			= ide_disk, | 
|  | .supports_dsc_overlap	= 0, | 
|  | .do_request		= ide_do_rw_disk, | 
|  | .end_request		= ide_end_request, | 
|  | .error			= __ide_error, | 
|  | .abort			= __ide_abort, | 
|  | #ifdef CONFIG_IDE_PROC_FS | 
|  | .proc			= idedisk_proc, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int idedisk_set_doorlock(ide_drive_t *drive, int on) | 
|  | { | 
|  | ide_task_t task; | 
|  |  | 
|  | memset(&task, 0, sizeof(task)); | 
|  | task.tf.command = on ? WIN_DOORLOCK : WIN_DOORUNLOCK; | 
|  | task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | 
|  |  | 
|  | return ide_no_data_taskfile(drive, &task); | 
|  | } | 
|  |  | 
|  | static int idedisk_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct gendisk *disk = inode->i_bdev->bd_disk; | 
|  | struct ide_disk_obj *idkp; | 
|  | ide_drive_t *drive; | 
|  |  | 
|  | if (!(idkp = ide_disk_get(disk))) | 
|  | return -ENXIO; | 
|  |  | 
|  | drive = idkp->drive; | 
|  |  | 
|  | idkp->openers++; | 
|  |  | 
|  | if (drive->removable && idkp->openers == 1) { | 
|  | check_disk_change(inode->i_bdev); | 
|  | /* | 
|  | * Ignore the return code from door_lock, | 
|  | * since the open() has already succeeded, | 
|  | * and the door_lock is irrelevant at this point. | 
|  | */ | 
|  | if (drive->doorlocking && idedisk_set_doorlock(drive, 1)) | 
|  | drive->doorlocking = 0; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int idedisk_release(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct gendisk *disk = inode->i_bdev->bd_disk; | 
|  | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  |  | 
|  | if (idkp->openers == 1) | 
|  | ide_cacheflush_p(drive); | 
|  |  | 
|  | if (drive->removable && idkp->openers == 1) { | 
|  | if (drive->doorlocking && idedisk_set_doorlock(drive, 0)) | 
|  | drive->doorlocking = 0; | 
|  | } | 
|  |  | 
|  | idkp->openers--; | 
|  |  | 
|  | ide_disk_put(idkp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | 
|  | { | 
|  | struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  |  | 
|  | geo->heads = drive->bios_head; | 
|  | geo->sectors = drive->bios_sect; | 
|  | geo->cylinders = (u16)drive->bios_cyl; /* truncate */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int idedisk_ioctl(struct inode *inode, struct file *file, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct block_device *bdev = inode->i_bdev; | 
|  | struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  | int err, (*setfunc)(ide_drive_t *, int); | 
|  | u8 *val; | 
|  |  | 
|  | switch (cmd) { | 
|  | case HDIO_GET_ADDRESS:	 val = &drive->addressing;	goto read_val; | 
|  | case HDIO_GET_MULTCOUNT: val = &drive->mult_count;	goto read_val; | 
|  | case HDIO_GET_NOWERR:	 val = &drive->nowerr;		goto read_val; | 
|  | case HDIO_GET_WCACHE:	 val = &drive->wcache;		goto read_val; | 
|  | case HDIO_GET_ACOUSTIC:	 val = &drive->acoustic;	goto read_val; | 
|  | case HDIO_SET_ADDRESS:	 setfunc = set_lba_addressing;	goto set_val; | 
|  | case HDIO_SET_MULTCOUNT: setfunc = set_multcount;	goto set_val; | 
|  | case HDIO_SET_NOWERR:	 setfunc = set_nowerr;		goto set_val; | 
|  | case HDIO_SET_WCACHE:	 setfunc = write_cache;		goto set_val; | 
|  | case HDIO_SET_ACOUSTIC:	 setfunc = set_acoustic;	goto set_val; | 
|  | } | 
|  |  | 
|  | return generic_ide_ioctl(drive, file, bdev, cmd, arg); | 
|  |  | 
|  | read_val: | 
|  | mutex_lock(&ide_setting_mtx); | 
|  | spin_lock_irqsave(&ide_lock, flags); | 
|  | err = *val; | 
|  | spin_unlock_irqrestore(&ide_lock, flags); | 
|  | mutex_unlock(&ide_setting_mtx); | 
|  | return err >= 0 ? put_user(err, (long __user *)arg) : err; | 
|  |  | 
|  | set_val: | 
|  | if (bdev != bdev->bd_contains) | 
|  | err = -EINVAL; | 
|  | else { | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | err = -EACCES; | 
|  | else { | 
|  | mutex_lock(&ide_setting_mtx); | 
|  | err = setfunc(drive, arg); | 
|  | mutex_unlock(&ide_setting_mtx); | 
|  | } | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int idedisk_media_changed(struct gendisk *disk) | 
|  | { | 
|  | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  |  | 
|  | /* do not scan partitions twice if this is a removable device */ | 
|  | if (drive->attach) { | 
|  | drive->attach = 0; | 
|  | return 0; | 
|  | } | 
|  | /* if removable, always assume it was changed */ | 
|  | return drive->removable; | 
|  | } | 
|  |  | 
|  | static int idedisk_revalidate_disk(struct gendisk *disk) | 
|  | { | 
|  | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | set_capacity(disk, idedisk_capacity(idkp->drive)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct block_device_operations idedisk_ops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open		= idedisk_open, | 
|  | .release	= idedisk_release, | 
|  | .ioctl		= idedisk_ioctl, | 
|  | .getgeo		= idedisk_getgeo, | 
|  | .media_changed	= idedisk_media_changed, | 
|  | .revalidate_disk= idedisk_revalidate_disk | 
|  | }; | 
|  |  | 
|  | MODULE_DESCRIPTION("ATA DISK Driver"); | 
|  |  | 
|  | static int ide_disk_probe(ide_drive_t *drive) | 
|  | { | 
|  | struct ide_disk_obj *idkp; | 
|  | struct gendisk *g; | 
|  |  | 
|  | /* strstr("foo", "") is non-NULL */ | 
|  | if (!strstr("ide-disk", drive->driver_req)) | 
|  | goto failed; | 
|  | if (!drive->present) | 
|  | goto failed; | 
|  | if (drive->media != ide_disk) | 
|  | goto failed; | 
|  |  | 
|  | idkp = kzalloc(sizeof(*idkp), GFP_KERNEL); | 
|  | if (!idkp) | 
|  | goto failed; | 
|  |  | 
|  | g = alloc_disk_node(1 << PARTN_BITS, | 
|  | hwif_to_node(drive->hwif)); | 
|  | if (!g) | 
|  | goto out_free_idkp; | 
|  |  | 
|  | ide_init_disk(g, drive); | 
|  |  | 
|  | ide_proc_register_driver(drive, &idedisk_driver); | 
|  |  | 
|  | kref_init(&idkp->kref); | 
|  |  | 
|  | idkp->drive = drive; | 
|  | idkp->driver = &idedisk_driver; | 
|  | idkp->disk = g; | 
|  |  | 
|  | g->private_data = &idkp->driver; | 
|  |  | 
|  | drive->driver_data = idkp; | 
|  |  | 
|  | idedisk_setup(drive); | 
|  | if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { | 
|  | printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", | 
|  | drive->name, drive->head); | 
|  | drive->attach = 0; | 
|  | } else | 
|  | drive->attach = 1; | 
|  |  | 
|  | g->minors = 1 << PARTN_BITS; | 
|  | g->driverfs_dev = &drive->gendev; | 
|  | g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; | 
|  | set_capacity(g, idedisk_capacity(drive)); | 
|  | g->fops = &idedisk_ops; | 
|  | add_disk(g); | 
|  | return 0; | 
|  |  | 
|  | out_free_idkp: | 
|  | kfree(idkp); | 
|  | failed: | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static void __exit idedisk_exit (void) | 
|  | { | 
|  | driver_unregister(&idedisk_driver.gen_driver); | 
|  | } | 
|  |  | 
|  | static int __init idedisk_init(void) | 
|  | { | 
|  | return driver_register(&idedisk_driver.gen_driver); | 
|  | } | 
|  |  | 
|  | MODULE_ALIAS("ide:*m-disk*"); | 
|  | module_init(idedisk_init); | 
|  | module_exit(idedisk_exit); | 
|  | MODULE_LICENSE("GPL"); |