| /* | 
 |  *  arch/s390/kernel/ptrace.c | 
 |  * | 
 |  *  S390 version | 
 |  *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation | 
 |  *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), | 
 |  *               Martin Schwidefsky (schwidefsky@de.ibm.com) | 
 |  * | 
 |  *  Based on PowerPC version  | 
 |  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | 
 |  * | 
 |  *  Derived from "arch/m68k/kernel/ptrace.c" | 
 |  *  Copyright (C) 1994 by Hamish Macdonald | 
 |  *  Taken from linux/kernel/ptrace.c and modified for M680x0. | 
 |  *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds | 
 |  * | 
 |  * Modified by Cort Dougan (cort@cs.nmt.edu)  | 
 |  * | 
 |  * | 
 |  * This file is subject to the terms and conditions of the GNU General | 
 |  * Public License.  See the file README.legal in the main directory of | 
 |  * this archive for more details. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/smp.h> | 
 | #include <linux/smp_lock.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/user.h> | 
 | #include <linux/security.h> | 
 | #include <linux/audit.h> | 
 | #include <linux/signal.h> | 
 |  | 
 | #include <asm/segment.h> | 
 | #include <asm/page.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/pgalloc.h> | 
 | #include <asm/system.h> | 
 | #include <asm/uaccess.h> | 
 | #include <asm/unistd.h> | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | #include "compat_ptrace.h" | 
 | #endif | 
 |  | 
 | static void | 
 | FixPerRegisters(struct task_struct *task) | 
 | { | 
 | 	struct pt_regs *regs; | 
 | 	per_struct *per_info; | 
 |  | 
 | 	regs = task_pt_regs(task); | 
 | 	per_info = (per_struct *) &task->thread.per_info; | 
 | 	per_info->control_regs.bits.em_instruction_fetch = | 
 | 		per_info->single_step | per_info->instruction_fetch; | 
 | 	 | 
 | 	if (per_info->single_step) { | 
 | 		per_info->control_regs.bits.starting_addr = 0; | 
 | #ifdef CONFIG_COMPAT | 
 | 		if (test_thread_flag(TIF_31BIT)) | 
 | 			per_info->control_regs.bits.ending_addr = 0x7fffffffUL; | 
 | 		else | 
 | #endif | 
 | 			per_info->control_regs.bits.ending_addr = PSW_ADDR_INSN; | 
 | 	} else { | 
 | 		per_info->control_regs.bits.starting_addr = | 
 | 			per_info->starting_addr; | 
 | 		per_info->control_regs.bits.ending_addr = | 
 | 			per_info->ending_addr; | 
 | 	} | 
 | 	/* | 
 | 	 * if any of the control reg tracing bits are on  | 
 | 	 * we switch on per in the psw | 
 | 	 */ | 
 | 	if (per_info->control_regs.words.cr[0] & PER_EM_MASK) | 
 | 		regs->psw.mask |= PSW_MASK_PER; | 
 | 	else | 
 | 		regs->psw.mask &= ~PSW_MASK_PER; | 
 |  | 
 | 	if (per_info->control_regs.bits.em_storage_alteration) | 
 | 		per_info->control_regs.bits.storage_alt_space_ctl = 1; | 
 | 	else | 
 | 		per_info->control_regs.bits.storage_alt_space_ctl = 0; | 
 | } | 
 |  | 
 | void | 
 | set_single_step(struct task_struct *task) | 
 | { | 
 | 	task->thread.per_info.single_step = 1; | 
 | 	FixPerRegisters(task); | 
 | } | 
 |  | 
 | void | 
 | clear_single_step(struct task_struct *task) | 
 | { | 
 | 	task->thread.per_info.single_step = 0; | 
 | 	FixPerRegisters(task); | 
 | } | 
 |  | 
 | /* | 
 |  * Called by kernel/ptrace.c when detaching.. | 
 |  * | 
 |  * Make sure single step bits etc are not set. | 
 |  */ | 
 | void | 
 | ptrace_disable(struct task_struct *child) | 
 | { | 
 | 	/* make sure the single step bit is not set. */ | 
 | 	clear_single_step(child); | 
 | } | 
 |  | 
 | #ifndef CONFIG_64BIT | 
 | # define __ADDR_MASK 3 | 
 | #else | 
 | # define __ADDR_MASK 7 | 
 | #endif | 
 |  | 
 | /* | 
 |  * Read the word at offset addr from the user area of a process. The | 
 |  * trouble here is that the information is littered over different | 
 |  * locations. The process registers are found on the kernel stack, | 
 |  * the floating point stuff and the trace settings are stored in | 
 |  * the task structure. In addition the different structures in | 
 |  * struct user contain pad bytes that should be read as zeroes. | 
 |  * Lovely... | 
 |  */ | 
 | static int | 
 | peek_user(struct task_struct *child, addr_t addr, addr_t data) | 
 | { | 
 | 	struct user *dummy = NULL; | 
 | 	addr_t offset, tmp, mask; | 
 |  | 
 | 	/* | 
 | 	 * Stupid gdb peeks/pokes the access registers in 64 bit with | 
 | 	 * an alignment of 4. Programmers from hell... | 
 | 	 */ | 
 | 	mask = __ADDR_MASK; | 
 | #ifdef CONFIG_64BIT | 
 | 	if (addr >= (addr_t) &dummy->regs.acrs && | 
 | 	    addr < (addr_t) &dummy->regs.orig_gpr2) | 
 | 		mask = 3; | 
 | #endif | 
 | 	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK) | 
 | 		return -EIO; | 
 |  | 
 | 	if (addr < (addr_t) &dummy->regs.acrs) { | 
 | 		/* | 
 | 		 * psw and gprs are stored on the stack | 
 | 		 */ | 
 | 		tmp = *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr); | 
 | 		if (addr == (addr_t) &dummy->regs.psw.mask) | 
 | 			/* Remove per bit from user psw. */ | 
 | 			tmp &= ~PSW_MASK_PER; | 
 |  | 
 | 	} else if (addr < (addr_t) &dummy->regs.orig_gpr2) { | 
 | 		/* | 
 | 		 * access registers are stored in the thread structure | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy->regs.acrs; | 
 | #ifdef CONFIG_64BIT | 
 | 		/* | 
 | 		 * Very special case: old & broken 64 bit gdb reading | 
 | 		 * from acrs[15]. Result is a 64 bit value. Read the | 
 | 		 * 32 bit acrs[15] value and shift it by 32. Sick... | 
 | 		 */ | 
 | 		if (addr == (addr_t) &dummy->regs.acrs[15]) | 
 | 			tmp = ((unsigned long) child->thread.acrs[15]) << 32; | 
 | 		else | 
 | #endif | 
 | 		tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset); | 
 |  | 
 | 	} else if (addr == (addr_t) &dummy->regs.orig_gpr2) { | 
 | 		/* | 
 | 		 * orig_gpr2 is stored on the kernel stack | 
 | 		 */ | 
 | 		tmp = (addr_t) task_pt_regs(child)->orig_gpr2; | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) { | 
 | 		/*  | 
 | 		 * floating point regs. are stored in the thread structure | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy->regs.fp_regs; | 
 | 		tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset); | 
 | 		if (addr == (addr_t) &dummy->regs.fp_regs.fpc) | 
 | 			tmp &= (unsigned long) FPC_VALID_MASK | 
 | 				<< (BITS_PER_LONG - 32); | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) { | 
 | 		/* | 
 | 		 * per_info is found in the thread structure | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy->regs.per_info; | 
 | 		tmp = *(addr_t *)((addr_t) &child->thread.per_info + offset); | 
 |  | 
 | 	} else | 
 | 		tmp = 0; | 
 |  | 
 | 	return put_user(tmp, (addr_t __user *) data); | 
 | } | 
 |  | 
 | /* | 
 |  * Write a word to the user area of a process at location addr. This | 
 |  * operation does have an additional problem compared to peek_user. | 
 |  * Stores to the program status word and on the floating point | 
 |  * control register needs to get checked for validity. | 
 |  */ | 
 | static int | 
 | poke_user(struct task_struct *child, addr_t addr, addr_t data) | 
 | { | 
 | 	struct user *dummy = NULL; | 
 | 	addr_t offset, mask; | 
 |  | 
 | 	/* | 
 | 	 * Stupid gdb peeks/pokes the access registers in 64 bit with | 
 | 	 * an alignment of 4. Programmers from hell indeed... | 
 | 	 */ | 
 | 	mask = __ADDR_MASK; | 
 | #ifdef CONFIG_64BIT | 
 | 	if (addr >= (addr_t) &dummy->regs.acrs && | 
 | 	    addr < (addr_t) &dummy->regs.orig_gpr2) | 
 | 		mask = 3; | 
 | #endif | 
 | 	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK) | 
 | 		return -EIO; | 
 |  | 
 | 	if (addr < (addr_t) &dummy->regs.acrs) { | 
 | 		/* | 
 | 		 * psw and gprs are stored on the stack | 
 | 		 */ | 
 | 		if (addr == (addr_t) &dummy->regs.psw.mask && | 
 | #ifdef CONFIG_COMPAT | 
 | 		    data != PSW_MASK_MERGE(PSW_USER32_BITS, data) && | 
 | #endif | 
 | 		    data != PSW_MASK_MERGE(PSW_USER_BITS, data)) | 
 | 			/* Invalid psw mask. */ | 
 | 			return -EINVAL; | 
 | #ifndef CONFIG_64BIT | 
 | 		if (addr == (addr_t) &dummy->regs.psw.addr) | 
 | 			/* I'd like to reject addresses without the | 
 | 			   high order bit but older gdb's rely on it */ | 
 | 			data |= PSW_ADDR_AMODE; | 
 | #endif | 
 | 		*(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data; | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) { | 
 | 		/* | 
 | 		 * access registers are stored in the thread structure | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy->regs.acrs; | 
 | #ifdef CONFIG_64BIT | 
 | 		/* | 
 | 		 * Very special case: old & broken 64 bit gdb writing | 
 | 		 * to acrs[15] with a 64 bit value. Ignore the lower | 
 | 		 * half of the value and write the upper 32 bit to | 
 | 		 * acrs[15]. Sick... | 
 | 		 */ | 
 | 		if (addr == (addr_t) &dummy->regs.acrs[15]) | 
 | 			child->thread.acrs[15] = (unsigned int) (data >> 32); | 
 | 		else | 
 | #endif | 
 | 		*(addr_t *)((addr_t) &child->thread.acrs + offset) = data; | 
 |  | 
 | 	} else if (addr == (addr_t) &dummy->regs.orig_gpr2) { | 
 | 		/* | 
 | 		 * orig_gpr2 is stored on the kernel stack | 
 | 		 */ | 
 | 		task_pt_regs(child)->orig_gpr2 = data; | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) { | 
 | 		/* | 
 | 		 * floating point regs. are stored in the thread structure | 
 | 		 */ | 
 | 		if (addr == (addr_t) &dummy->regs.fp_regs.fpc && | 
 | 		    (data & ~((unsigned long) FPC_VALID_MASK | 
 | 			      << (BITS_PER_LONG - 32))) != 0) | 
 | 			return -EINVAL; | 
 | 		offset = addr - (addr_t) &dummy->regs.fp_regs; | 
 | 		*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data; | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) { | 
 | 		/* | 
 | 		 * per_info is found in the thread structure  | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy->regs.per_info; | 
 | 		*(addr_t *)((addr_t) &child->thread.per_info + offset) = data; | 
 |  | 
 | 	} | 
 |  | 
 | 	FixPerRegisters(child); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | do_ptrace_normal(struct task_struct *child, long request, long addr, long data) | 
 | { | 
 | 	unsigned long tmp; | 
 | 	ptrace_area parea;  | 
 | 	int copied, ret; | 
 |  | 
 | 	switch (request) { | 
 | 	case PTRACE_PEEKTEXT: | 
 | 	case PTRACE_PEEKDATA: | 
 | 		/* Remove high order bit from address (only for 31 bit). */ | 
 | 		addr &= PSW_ADDR_INSN; | 
 | 		/* read word at location addr. */ | 
 | 		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); | 
 | 		if (copied != sizeof(tmp)) | 
 | 			return -EIO; | 
 | 		return put_user(tmp, (unsigned long __user *) data); | 
 |  | 
 | 	case PTRACE_PEEKUSR: | 
 | 		/* read the word at location addr in the USER area. */ | 
 | 		return peek_user(child, addr, data); | 
 |  | 
 | 	case PTRACE_POKETEXT: | 
 | 	case PTRACE_POKEDATA: | 
 | 		/* Remove high order bit from address (only for 31 bit). */ | 
 | 		addr &= PSW_ADDR_INSN; | 
 | 		/* write the word at location addr. */ | 
 | 		copied = access_process_vm(child, addr, &data, sizeof(data),1); | 
 | 		if (copied != sizeof(data)) | 
 | 			return -EIO; | 
 | 		return 0; | 
 |  | 
 | 	case PTRACE_POKEUSR: | 
 | 		/* write the word at location addr in the USER area */ | 
 | 		return poke_user(child, addr, data); | 
 |  | 
 | 	case PTRACE_PEEKUSR_AREA: | 
 | 	case PTRACE_POKEUSR_AREA: | 
 | 		if (copy_from_user(&parea, (void __user *) addr, | 
 | 							sizeof(parea))) | 
 | 			return -EFAULT; | 
 | 		addr = parea.kernel_addr; | 
 | 		data = parea.process_addr; | 
 | 		copied = 0; | 
 | 		while (copied < parea.len) { | 
 | 			if (request == PTRACE_PEEKUSR_AREA) | 
 | 				ret = peek_user(child, addr, data); | 
 | 			else { | 
 | 				addr_t tmp; | 
 | 				if (get_user (tmp, (addr_t __user *) data)) | 
 | 					return -EFAULT; | 
 | 				ret = poke_user(child, addr, tmp); | 
 | 			} | 
 | 			if (ret) | 
 | 				return ret; | 
 | 			addr += sizeof(unsigned long); | 
 | 			data += sizeof(unsigned long); | 
 | 			copied += sizeof(unsigned long); | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 | 	return ptrace_request(child, request, addr, data); | 
 | } | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | /* | 
 |  * Now the fun part starts... a 31 bit program running in the | 
 |  * 31 bit emulation tracing another program. PTRACE_PEEKTEXT, | 
 |  * PTRACE_PEEKDATA, PTRACE_POKETEXT and PTRACE_POKEDATA are easy | 
 |  * to handle, the difference to the 64 bit versions of the requests | 
 |  * is that the access is done in multiples of 4 byte instead of | 
 |  * 8 bytes (sizeof(unsigned long) on 31/64 bit). | 
 |  * The ugly part are PTRACE_PEEKUSR, PTRACE_PEEKUSR_AREA, | 
 |  * PTRACE_POKEUSR and PTRACE_POKEUSR_AREA. If the traced program | 
 |  * is a 31 bit program too, the content of struct user can be | 
 |  * emulated. A 31 bit program peeking into the struct user of | 
 |  * a 64 bit program is a no-no. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Same as peek_user but for a 31 bit program. | 
 |  */ | 
 | static int | 
 | peek_user_emu31(struct task_struct *child, addr_t addr, addr_t data) | 
 | { | 
 | 	struct user32 *dummy32 = NULL; | 
 | 	per_struct32 *dummy_per32 = NULL; | 
 | 	addr_t offset; | 
 | 	__u32 tmp; | 
 |  | 
 | 	if (!test_thread_flag(TIF_31BIT) || | 
 | 	    (addr & 3) || addr > sizeof(struct user) - 3) | 
 | 		return -EIO; | 
 |  | 
 | 	if (addr < (addr_t) &dummy32->regs.acrs) { | 
 | 		/* | 
 | 		 * psw and gprs are stored on the stack | 
 | 		 */ | 
 | 		if (addr == (addr_t) &dummy32->regs.psw.mask) { | 
 | 			/* Fake a 31 bit psw mask. */ | 
 | 			tmp = (__u32)(task_pt_regs(child)->psw.mask >> 32); | 
 | 			tmp = PSW32_MASK_MERGE(PSW32_USER_BITS, tmp); | 
 | 		} else if (addr == (addr_t) &dummy32->regs.psw.addr) { | 
 | 			/* Fake a 31 bit psw address. */ | 
 | 			tmp = (__u32) task_pt_regs(child)->psw.addr | | 
 | 				PSW32_ADDR_AMODE31; | 
 | 		} else { | 
 | 			/* gpr 0-15 */ | 
 | 			tmp = *(__u32 *)((addr_t) &task_pt_regs(child)->psw + | 
 | 					 addr*2 + 4); | 
 | 		} | 
 | 	} else if (addr < (addr_t) (&dummy32->regs.orig_gpr2)) { | 
 | 		/* | 
 | 		 * access registers are stored in the thread structure | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy32->regs.acrs; | 
 | 		tmp = *(__u32*)((addr_t) &child->thread.acrs + offset); | 
 |  | 
 | 	} else if (addr == (addr_t) (&dummy32->regs.orig_gpr2)) { | 
 | 		/* | 
 | 		 * orig_gpr2 is stored on the kernel stack | 
 | 		 */ | 
 | 		tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4); | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) { | 
 | 		/* | 
 | 		 * floating point regs. are stored in the thread structure  | 
 | 		 */ | 
 | 	        offset = addr - (addr_t) &dummy32->regs.fp_regs; | 
 | 		tmp = *(__u32 *)((addr_t) &child->thread.fp_regs + offset); | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy32->regs.per_info + 1)) { | 
 | 		/* | 
 | 		 * per_info is found in the thread structure | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy32->regs.per_info; | 
 | 		/* This is magic. See per_struct and per_struct32. */ | 
 | 		if ((offset >= (addr_t) &dummy_per32->control_regs && | 
 | 		     offset < (addr_t) (&dummy_per32->control_regs + 1)) || | 
 | 		    (offset >= (addr_t) &dummy_per32->starting_addr && | 
 | 		     offset <= (addr_t) &dummy_per32->ending_addr) || | 
 | 		    offset == (addr_t) &dummy_per32->lowcore.words.address) | 
 | 			offset = offset*2 + 4; | 
 | 		else | 
 | 			offset = offset*2; | 
 | 		tmp = *(__u32 *)((addr_t) &child->thread.per_info + offset); | 
 |  | 
 | 	} else | 
 | 		tmp = 0; | 
 |  | 
 | 	return put_user(tmp, (__u32 __user *) data); | 
 | } | 
 |  | 
 | /* | 
 |  * Same as poke_user but for a 31 bit program. | 
 |  */ | 
 | static int | 
 | poke_user_emu31(struct task_struct *child, addr_t addr, addr_t data) | 
 | { | 
 | 	struct user32 *dummy32 = NULL; | 
 | 	per_struct32 *dummy_per32 = NULL; | 
 | 	addr_t offset; | 
 | 	__u32 tmp; | 
 |  | 
 | 	if (!test_thread_flag(TIF_31BIT) || | 
 | 	    (addr & 3) || addr > sizeof(struct user32) - 3) | 
 | 		return -EIO; | 
 |  | 
 | 	tmp = (__u32) data; | 
 |  | 
 | 	if (addr < (addr_t) &dummy32->regs.acrs) { | 
 | 		/* | 
 | 		 * psw, gprs, acrs and orig_gpr2 are stored on the stack | 
 | 		 */ | 
 | 		if (addr == (addr_t) &dummy32->regs.psw.mask) { | 
 | 			/* Build a 64 bit psw mask from 31 bit mask. */ | 
 | 			if (tmp != PSW32_MASK_MERGE(PSW32_USER_BITS, tmp)) | 
 | 				/* Invalid psw mask. */ | 
 | 				return -EINVAL; | 
 | 			task_pt_regs(child)->psw.mask = | 
 | 				PSW_MASK_MERGE(PSW_USER32_BITS, (__u64) tmp << 32); | 
 | 		} else if (addr == (addr_t) &dummy32->regs.psw.addr) { | 
 | 			/* Build a 64 bit psw address from 31 bit address. */ | 
 | 			task_pt_regs(child)->psw.addr = | 
 | 				(__u64) tmp & PSW32_ADDR_INSN; | 
 | 		} else { | 
 | 			/* gpr 0-15 */ | 
 | 			*(__u32*)((addr_t) &task_pt_regs(child)->psw | 
 | 				  + addr*2 + 4) = tmp; | 
 | 		} | 
 | 	} else if (addr < (addr_t) (&dummy32->regs.orig_gpr2)) { | 
 | 		/* | 
 | 		 * access registers are stored in the thread structure | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy32->regs.acrs; | 
 | 		*(__u32*)((addr_t) &child->thread.acrs + offset) = tmp; | 
 |  | 
 | 	} else if (addr == (addr_t) (&dummy32->regs.orig_gpr2)) { | 
 | 		/* | 
 | 		 * orig_gpr2 is stored on the kernel stack | 
 | 		 */ | 
 | 		*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp; | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) { | 
 | 		/* | 
 | 		 * floating point regs. are stored in the thread structure  | 
 | 		 */ | 
 | 		if (addr == (addr_t) &dummy32->regs.fp_regs.fpc && | 
 | 		    (tmp & ~FPC_VALID_MASK) != 0) | 
 | 			/* Invalid floating point control. */ | 
 | 			return -EINVAL; | 
 | 	        offset = addr - (addr_t) &dummy32->regs.fp_regs; | 
 | 		*(__u32 *)((addr_t) &child->thread.fp_regs + offset) = tmp; | 
 |  | 
 | 	} else if (addr < (addr_t) (&dummy32->regs.per_info + 1)) { | 
 | 		/* | 
 | 		 * per_info is found in the thread structure. | 
 | 		 */ | 
 | 		offset = addr - (addr_t) &dummy32->regs.per_info; | 
 | 		/* | 
 | 		 * This is magic. See per_struct and per_struct32. | 
 | 		 * By incident the offsets in per_struct are exactly | 
 | 		 * twice the offsets in per_struct32 for all fields. | 
 | 		 * The 8 byte fields need special handling though, | 
 | 		 * because the second half (bytes 4-7) is needed and | 
 | 		 * not the first half. | 
 | 		 */ | 
 | 		if ((offset >= (addr_t) &dummy_per32->control_regs && | 
 | 		     offset < (addr_t) (&dummy_per32->control_regs + 1)) || | 
 | 		    (offset >= (addr_t) &dummy_per32->starting_addr && | 
 | 		     offset <= (addr_t) &dummy_per32->ending_addr) || | 
 | 		    offset == (addr_t) &dummy_per32->lowcore.words.address) | 
 | 			offset = offset*2 + 4; | 
 | 		else | 
 | 			offset = offset*2; | 
 | 		*(__u32 *)((addr_t) &child->thread.per_info + offset) = tmp; | 
 |  | 
 | 	} | 
 |  | 
 | 	FixPerRegisters(child); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | do_ptrace_emu31(struct task_struct *child, long request, long addr, long data) | 
 | { | 
 | 	unsigned int tmp;  /* 4 bytes !! */ | 
 | 	ptrace_area_emu31 parea;  | 
 | 	int copied, ret; | 
 |  | 
 | 	switch (request) { | 
 | 	case PTRACE_PEEKTEXT: | 
 | 	case PTRACE_PEEKDATA: | 
 | 		/* read word at location addr. */ | 
 | 		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); | 
 | 		if (copied != sizeof(tmp)) | 
 | 			return -EIO; | 
 | 		return put_user(tmp, (unsigned int __user *) data); | 
 |  | 
 | 	case PTRACE_PEEKUSR: | 
 | 		/* read the word at location addr in the USER area. */ | 
 | 		return peek_user_emu31(child, addr, data); | 
 |  | 
 | 	case PTRACE_POKETEXT: | 
 | 	case PTRACE_POKEDATA: | 
 | 		/* write the word at location addr. */ | 
 | 		tmp = data; | 
 | 		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 1); | 
 | 		if (copied != sizeof(tmp)) | 
 | 			return -EIO; | 
 | 		return 0; | 
 |  | 
 | 	case PTRACE_POKEUSR: | 
 | 		/* write the word at location addr in the USER area */ | 
 | 		return poke_user_emu31(child, addr, data); | 
 |  | 
 | 	case PTRACE_PEEKUSR_AREA: | 
 | 	case PTRACE_POKEUSR_AREA: | 
 | 		if (copy_from_user(&parea, (void __user *) addr, | 
 | 							sizeof(parea))) | 
 | 			return -EFAULT; | 
 | 		addr = parea.kernel_addr; | 
 | 		data = parea.process_addr; | 
 | 		copied = 0; | 
 | 		while (copied < parea.len) { | 
 | 			if (request == PTRACE_PEEKUSR_AREA) | 
 | 				ret = peek_user_emu31(child, addr, data); | 
 | 			else { | 
 | 				__u32 tmp; | 
 | 				if (get_user (tmp, (__u32 __user *) data)) | 
 | 					return -EFAULT; | 
 | 				ret = poke_user_emu31(child, addr, tmp); | 
 | 			} | 
 | 			if (ret) | 
 | 				return ret; | 
 | 			addr += sizeof(unsigned int); | 
 | 			data += sizeof(unsigned int); | 
 | 			copied += sizeof(unsigned int); | 
 | 		} | 
 | 		return 0; | 
 | 	case PTRACE_GETEVENTMSG: | 
 | 		return put_user((__u32) child->ptrace_message, | 
 | 				(unsigned int __user *) data); | 
 | 	case PTRACE_GETSIGINFO: | 
 | 		if (child->last_siginfo == NULL) | 
 | 			return -EINVAL; | 
 | 		return copy_siginfo_to_user32((compat_siginfo_t __user *) data, | 
 | 					      child->last_siginfo); | 
 | 	case PTRACE_SETSIGINFO: | 
 | 		if (child->last_siginfo == NULL) | 
 | 			return -EINVAL; | 
 | 		return copy_siginfo_from_user32(child->last_siginfo, | 
 | 						(compat_siginfo_t __user *) data); | 
 | 	} | 
 | 	return ptrace_request(child, request, addr, data); | 
 | } | 
 | #endif | 
 |  | 
 | #define PT32_IEEE_IP 0x13c | 
 |  | 
 | static int | 
 | do_ptrace(struct task_struct *child, long request, long addr, long data) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (request == PTRACE_ATTACH) | 
 | 		return ptrace_attach(child); | 
 |  | 
 | 	/* | 
 | 	 * Special cases to get/store the ieee instructions pointer. | 
 | 	 */ | 
 | 	if (child == current) { | 
 | 		if (request == PTRACE_PEEKUSR && addr == PT_IEEE_IP) | 
 | 			return peek_user(child, addr, data); | 
 | 		if (request == PTRACE_POKEUSR && addr == PT_IEEE_IP) | 
 | 			return poke_user(child, addr, data); | 
 | #ifdef CONFIG_COMPAT | 
 | 		if (request == PTRACE_PEEKUSR && | 
 | 		    addr == PT32_IEEE_IP && test_thread_flag(TIF_31BIT)) | 
 | 			return peek_user_emu31(child, addr, data); | 
 | 		if (request == PTRACE_POKEUSR && | 
 | 		    addr == PT32_IEEE_IP && test_thread_flag(TIF_31BIT)) | 
 | 			return poke_user_emu31(child, addr, data); | 
 | #endif | 
 | 	} | 
 |  | 
 | 	ret = ptrace_check_attach(child, request == PTRACE_KILL); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	switch (request) { | 
 | 	case PTRACE_SYSCALL: | 
 | 		/* continue and stop at next (return from) syscall */ | 
 | 	case PTRACE_CONT: | 
 | 		/* restart after signal. */ | 
 | 		if (!valid_signal(data)) | 
 | 			return -EIO; | 
 | 		if (request == PTRACE_SYSCALL) | 
 | 			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | 
 | 		else | 
 | 			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | 
 | 		child->exit_code = data; | 
 | 		/* make sure the single step bit is not set. */ | 
 | 		clear_single_step(child); | 
 | 		wake_up_process(child); | 
 | 		return 0; | 
 |  | 
 | 	case PTRACE_KILL: | 
 | 		/* | 
 | 		 * make the child exit.  Best I can do is send it a sigkill.  | 
 | 		 * perhaps it should be put in the status that it wants to  | 
 | 		 * exit. | 
 | 		 */ | 
 | 		if (child->exit_state == EXIT_ZOMBIE) /* already dead */ | 
 | 			return 0; | 
 | 		child->exit_code = SIGKILL; | 
 | 		/* make sure the single step bit is not set. */ | 
 | 		clear_single_step(child); | 
 | 		wake_up_process(child); | 
 | 		return 0; | 
 |  | 
 | 	case PTRACE_SINGLESTEP: | 
 | 		/* set the trap flag. */ | 
 | 		if (!valid_signal(data)) | 
 | 			return -EIO; | 
 | 		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | 
 | 		child->exit_code = data; | 
 | 		if (data) | 
 | 			set_tsk_thread_flag(child, TIF_SINGLE_STEP); | 
 | 		else | 
 | 			set_single_step(child); | 
 | 		/* give it a chance to run. */ | 
 | 		wake_up_process(child); | 
 | 		return 0; | 
 |  | 
 | 	case PTRACE_DETACH: | 
 | 		/* detach a process that was attached. */ | 
 | 		return ptrace_detach(child, data); | 
 |  | 
 |  | 
 | 	/* Do requests that differ for 31/64 bit */ | 
 | 	default: | 
 | #ifdef CONFIG_COMPAT | 
 | 		if (test_thread_flag(TIF_31BIT)) | 
 | 			return do_ptrace_emu31(child, request, addr, data); | 
 | #endif | 
 | 		return do_ptrace_normal(child, request, addr, data); | 
 | 	} | 
 | 	/* Not reached.  */ | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | asmlinkage long | 
 | sys_ptrace(long request, long pid, long addr, long data) | 
 | { | 
 | 	struct task_struct *child; | 
 | 	int ret; | 
 |  | 
 | 	lock_kernel(); | 
 | 	if (request == PTRACE_TRACEME) { | 
 | 		 ret = ptrace_traceme(); | 
 | 		 goto out; | 
 | 	} | 
 |  | 
 | 	child = ptrace_get_task_struct(pid); | 
 | 	if (IS_ERR(child)) { | 
 | 		ret = PTR_ERR(child); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	ret = do_ptrace(child, request, addr, data); | 
 | 	put_task_struct(child); | 
 | out: | 
 | 	unlock_kernel(); | 
 | 	return ret; | 
 | } | 
 |  | 
 | asmlinkage void | 
 | syscall_trace(struct pt_regs *regs, int entryexit) | 
 | { | 
 | 	if (unlikely(current->audit_context) && entryexit) | 
 | 		audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]); | 
 |  | 
 | 	if (!test_thread_flag(TIF_SYSCALL_TRACE)) | 
 | 		goto out; | 
 | 	if (!(current->ptrace & PT_PTRACED)) | 
 | 		goto out; | 
 | 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) | 
 | 				 ? 0x80 : 0)); | 
 |  | 
 | 	/* | 
 | 	 * If the debuffer has set an invalid system call number, | 
 | 	 * we prepare to skip the system call restart handling. | 
 | 	 */ | 
 | 	if (!entryexit && regs->gprs[2] >= NR_syscalls) | 
 | 		regs->trap = -1; | 
 |  | 
 | 	/* | 
 | 	 * this isn't the same as continuing with a signal, but it will do | 
 | 	 * for normal use.  strace only continues with a signal if the | 
 | 	 * stopping signal is not SIGTRAP.  -brl | 
 | 	 */ | 
 | 	if (current->exit_code) { | 
 | 		send_sig(current->exit_code, current, 1); | 
 | 		current->exit_code = 0; | 
 | 	} | 
 |  out: | 
 | 	if (unlikely(current->audit_context) && !entryexit) | 
 | 		audit_syscall_entry(test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X, | 
 | 				    regs->gprs[2], regs->orig_gpr2, regs->gprs[3], | 
 | 				    regs->gprs[4], regs->gprs[5]); | 
 | } |