| /* |
| Keyspan USB to Serial Converter driver |
| |
| (C) Copyright (C) 2000-2001 |
| Hugh Blemings <hugh@blemings.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| See http://misc.nu/hugh/keyspan.html for more information. |
| |
| Code in this driver inspired by and in a number of places taken |
| from Brian Warner's original Keyspan-PDA driver. |
| |
| This driver has been put together with the support of Innosys, Inc. |
| and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. |
| Thanks Guys :) |
| |
| Thanks to Paulus for miscellaneous tidy ups, some largish chunks |
| of much nicer and/or completely new code and (perhaps most uniquely) |
| having the patience to sit down and explain why and where he'd changed |
| stuff. |
| |
| Tip 'o the hat to IBM (and previously Linuxcare :) for supporting |
| staff in their work on open source projects. |
| |
| See keyspan.c for update history. |
| |
| */ |
| |
| #ifndef __LINUX_USB_SERIAL_KEYSPAN_H |
| #define __LINUX_USB_SERIAL_KEYSPAN_H |
| |
| |
| /* Function prototypes for Keyspan serial converter */ |
| static int keyspan_open (struct usb_serial_port *port, |
| struct file *filp); |
| static void keyspan_close (struct usb_serial_port *port, |
| struct file *filp); |
| static int keyspan_startup (struct usb_serial *serial); |
| static void keyspan_shutdown (struct usb_serial *serial); |
| static void keyspan_rx_throttle (struct usb_serial_port *port); |
| static void keyspan_rx_unthrottle (struct usb_serial_port *port); |
| static int keyspan_write_room (struct usb_serial_port *port); |
| |
| static int keyspan_write (struct usb_serial_port *port, |
| const unsigned char *buf, |
| int count); |
| |
| static void keyspan_send_setup (struct usb_serial_port *port, |
| int reset_port); |
| |
| |
| static int keyspan_chars_in_buffer (struct usb_serial_port *port); |
| static int keyspan_ioctl (struct usb_serial_port *port, |
| struct file *file, |
| unsigned int cmd, |
| unsigned long arg); |
| static void keyspan_set_termios (struct usb_serial_port *port, |
| struct termios *old); |
| static void keyspan_break_ctl (struct usb_serial_port *port, |
| int break_state); |
| static int keyspan_tiocmget (struct usb_serial_port *port, |
| struct file *file); |
| static int keyspan_tiocmset (struct usb_serial_port *port, |
| struct file *file, unsigned int set, |
| unsigned int clear); |
| static int keyspan_fake_startup (struct usb_serial *serial); |
| |
| static int keyspan_usa19_calc_baud (u32 baud_rate, u32 baudclk, |
| u8 *rate_hi, u8 *rate_low, |
| u8 *prescaler, int portnum); |
| |
| static int keyspan_usa19w_calc_baud (u32 baud_rate, u32 baudclk, |
| u8 *rate_hi, u8 *rate_low, |
| u8 *prescaler, int portnum); |
| |
| static int keyspan_usa28_calc_baud (u32 baud_rate, u32 baudclk, |
| u8 *rate_hi, u8 *rate_low, |
| u8 *prescaler, int portnum); |
| |
| static int keyspan_usa19hs_calc_baud (u32 baud_rate, u32 baudclk, |
| u8 *rate_hi, u8 *rate_low, |
| u8 *prescaler, int portnum); |
| |
| static int keyspan_usa28_send_setup (struct usb_serial *serial, |
| struct usb_serial_port *port, |
| int reset_port); |
| static int keyspan_usa26_send_setup (struct usb_serial *serial, |
| struct usb_serial_port *port, |
| int reset_port); |
| static int keyspan_usa49_send_setup (struct usb_serial *serial, |
| struct usb_serial_port *port, |
| int reset_port); |
| |
| static int keyspan_usa90_send_setup (struct usb_serial *serial, |
| struct usb_serial_port *port, |
| int reset_port); |
| |
| /* Struct used for firmware - increased size of data section |
| to allow Keyspan's 'C' firmware struct to be used unmodified */ |
| struct ezusb_hex_record { |
| __u16 address; |
| __u8 data_size; |
| __u8 data[64]; |
| }; |
| |
| /* Conditionally include firmware images, if they aren't |
| included create a null pointer instead. Current |
| firmware images aren't optimised to remove duplicate |
| addresses in the image itself. */ |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28 |
| #include "keyspan_usa28_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa28_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28X |
| #include "keyspan_usa28x_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa28x_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XA |
| #include "keyspan_usa28xa_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa28xa_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XB |
| #include "keyspan_usa28xb_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa28xb_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19 |
| #include "keyspan_usa19_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa19_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QI |
| #include "keyspan_usa19qi_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa19qi_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_MPR |
| #include "keyspan_mpr_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_mpr_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QW |
| #include "keyspan_usa19qw_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa19qw_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA18X |
| #include "keyspan_usa18x_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa18x_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19W |
| #include "keyspan_usa19w_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa19w_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49W |
| #include "keyspan_usa49w_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa49w_firmware = NULL; |
| #endif |
| |
| #ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49WLC |
| #include "keyspan_usa49wlc_fw.h" |
| #else |
| static const struct ezusb_hex_record *keyspan_usa49wlc_firmware = NULL; |
| #endif |
| |
| /* Values used for baud rate calculation - device specific */ |
| #define KEYSPAN_INVALID_BAUD_RATE (-1) |
| #define KEYSPAN_BAUD_RATE_OK (0) |
| #define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */ |
| #define KEYSPAN_USA19_BAUDCLK (12000000L) |
| #define KEYSPAN_USA19W_BAUDCLK (24000000L) |
| #define KEYSPAN_USA19HS_BAUDCLK (14769231L) |
| #define KEYSPAN_USA28_BAUDCLK (1843200L) |
| #define KEYSPAN_USA28X_BAUDCLK (12000000L) |
| #define KEYSPAN_USA49W_BAUDCLK (48000000L) |
| |
| /* Some constants used to characterise each device. */ |
| #define KEYSPAN_MAX_NUM_PORTS (4) |
| #define KEYSPAN_MAX_FLIPS (2) |
| |
| /* Device info for the Keyspan serial converter, used |
| by the overall usb-serial probe function */ |
| #define KEYSPAN_VENDOR_ID (0x06cd) |
| |
| /* Product IDs for the products supported, pre-renumeration */ |
| #define keyspan_usa18x_pre_product_id 0x0105 |
| #define keyspan_usa19_pre_product_id 0x0103 |
| #define keyspan_usa19qi_pre_product_id 0x010b |
| #define keyspan_mpr_pre_product_id 0x011b |
| #define keyspan_usa19qw_pre_product_id 0x0118 |
| #define keyspan_usa19w_pre_product_id 0x0106 |
| #define keyspan_usa28_pre_product_id 0x0101 |
| #define keyspan_usa28x_pre_product_id 0x0102 |
| #define keyspan_usa28xa_pre_product_id 0x0114 |
| #define keyspan_usa28xb_pre_product_id 0x0113 |
| #define keyspan_usa49w_pre_product_id 0x0109 |
| #define keyspan_usa49wlc_pre_product_id 0x011a |
| |
| /* Product IDs post-renumeration. Note that the 28x and 28xb |
| have the same id's post-renumeration but behave identically |
| so it's not an issue. */ |
| #define keyspan_usa18x_product_id 0x0112 |
| #define keyspan_usa19_product_id 0x0107 |
| #define keyspan_usa19qi_product_id 0x010c |
| #define keyspan_usa19hs_product_id 0x0121 |
| #define keyspan_mpr_product_id 0x011c |
| #define keyspan_usa19qw_product_id 0x0119 |
| #define keyspan_usa19w_product_id 0x0108 |
| #define keyspan_usa28_product_id 0x010f |
| #define keyspan_usa28x_product_id 0x0110 |
| #define keyspan_usa28xa_product_id 0x0115 |
| #define keyspan_usa28xb_product_id 0x0110 |
| #define keyspan_usa49w_product_id 0x010a |
| #define keyspan_usa49wlc_product_id 0x012a |
| |
| |
| struct keyspan_device_details { |
| /* product ID value */ |
| int product_id; |
| |
| enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90} msg_format; |
| |
| /* Number of physical ports */ |
| int num_ports; |
| |
| /* 1 if endpoint flipping used on input, 0 if not */ |
| int indat_endp_flip; |
| |
| /* 1 if endpoint flipping used on output, 0 if not */ |
| int outdat_endp_flip; |
| |
| /* Table mapping input data endpoint IDs to physical |
| port number and flip if used */ |
| int indat_endpoints[KEYSPAN_MAX_NUM_PORTS]; |
| |
| /* Same for output endpoints */ |
| int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS]; |
| |
| /* Input acknowledge endpoints */ |
| int inack_endpoints[KEYSPAN_MAX_NUM_PORTS]; |
| |
| /* Output control endpoints */ |
| int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS]; |
| |
| /* Endpoint used for input status */ |
| int instat_endpoint; |
| |
| /* Endpoint used for global control functions */ |
| int glocont_endpoint; |
| |
| int (*calculate_baud_rate) (u32 baud_rate, u32 baudclk, |
| u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); |
| u32 baudclk; |
| }; |
| |
| /* Now for each device type we setup the device detail |
| structure with the appropriate information (provided |
| in Keyspan's documentation) */ |
| |
| static const struct keyspan_device_details usa18x_device_details = { |
| .product_id = keyspan_usa18x_product_id, |
| .msg_format = msg_usa26, |
| .num_ports = 1, |
| .indat_endp_flip = 0, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81}, |
| .outdat_endpoints = {0x01}, |
| .inack_endpoints = {0x85}, |
| .outcont_endpoints = {0x05}, |
| .instat_endpoint = 0x87, |
| .glocont_endpoint = 0x07, |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, |
| .baudclk = KEYSPAN_USA18X_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa19_device_details = { |
| .product_id = keyspan_usa19_product_id, |
| .msg_format = msg_usa28, |
| .num_ports = 1, |
| .indat_endp_flip = 1, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81}, |
| .outdat_endpoints = {0x01}, |
| .inack_endpoints = {0x83}, |
| .outcont_endpoints = {0x03}, |
| .instat_endpoint = 0x84, |
| .glocont_endpoint = -1, |
| .calculate_baud_rate = keyspan_usa19_calc_baud, |
| .baudclk = KEYSPAN_USA19_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa19qi_device_details = { |
| .product_id = keyspan_usa19qi_product_id, |
| .msg_format = msg_usa28, |
| .num_ports = 1, |
| .indat_endp_flip = 1, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81}, |
| .outdat_endpoints = {0x01}, |
| .inack_endpoints = {0x83}, |
| .outcont_endpoints = {0x03}, |
| .instat_endpoint = 0x84, |
| .glocont_endpoint = -1, |
| .calculate_baud_rate = keyspan_usa28_calc_baud, |
| .baudclk = KEYSPAN_USA19_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details mpr_device_details = { |
| .product_id = keyspan_mpr_product_id, |
| .msg_format = msg_usa28, |
| .num_ports = 1, |
| .indat_endp_flip = 1, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81}, |
| .outdat_endpoints = {0x01}, |
| .inack_endpoints = {0x83}, |
| .outcont_endpoints = {0x03}, |
| .instat_endpoint = 0x84, |
| .glocont_endpoint = -1, |
| .calculate_baud_rate = keyspan_usa28_calc_baud, |
| .baudclk = KEYSPAN_USA19_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa19qw_device_details = { |
| .product_id = keyspan_usa19qw_product_id, |
| .msg_format = msg_usa26, |
| .num_ports = 1, |
| .indat_endp_flip = 0, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81}, |
| .outdat_endpoints = {0x01}, |
| .inack_endpoints = {0x85}, |
| .outcont_endpoints = {0x05}, |
| .instat_endpoint = 0x87, |
| .glocont_endpoint = 0x07, |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, |
| .baudclk = KEYSPAN_USA19W_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa19w_device_details = { |
| .product_id = keyspan_usa19w_product_id, |
| .msg_format = msg_usa26, |
| .num_ports = 1, |
| .indat_endp_flip = 0, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81}, |
| .outdat_endpoints = {0x01}, |
| .inack_endpoints = {0x85}, |
| .outcont_endpoints = {0x05}, |
| .instat_endpoint = 0x87, |
| .glocont_endpoint = 0x07, |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, |
| .baudclk = KEYSPAN_USA19W_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa19hs_device_details = { |
| .product_id = keyspan_usa19hs_product_id, |
| .msg_format = msg_usa90, |
| .num_ports = 1, |
| .indat_endp_flip = 0, |
| .outdat_endp_flip = 0, |
| .indat_endpoints = {0x81}, |
| .outdat_endpoints = {0x01}, |
| .inack_endpoints = {-1}, |
| .outcont_endpoints = {0x02}, |
| .instat_endpoint = 0x82, |
| .glocont_endpoint = -1, |
| .calculate_baud_rate = keyspan_usa19hs_calc_baud, |
| .baudclk = KEYSPAN_USA19HS_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa28_device_details = { |
| .product_id = keyspan_usa28_product_id, |
| .msg_format = msg_usa28, |
| .num_ports = 2, |
| .indat_endp_flip = 1, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81, 0x83}, |
| .outdat_endpoints = {0x01, 0x03}, |
| .inack_endpoints = {0x85, 0x86}, |
| .outcont_endpoints = {0x05, 0x06}, |
| .instat_endpoint = 0x87, |
| .glocont_endpoint = 0x07, |
| .calculate_baud_rate = keyspan_usa28_calc_baud, |
| .baudclk = KEYSPAN_USA28_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa28x_device_details = { |
| .product_id = keyspan_usa28x_product_id, |
| .msg_format = msg_usa26, |
| .num_ports = 2, |
| .indat_endp_flip = 0, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81, 0x83}, |
| .outdat_endpoints = {0x01, 0x03}, |
| .inack_endpoints = {0x85, 0x86}, |
| .outcont_endpoints = {0x05, 0x06}, |
| .instat_endpoint = 0x87, |
| .glocont_endpoint = 0x07, |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, |
| .baudclk = KEYSPAN_USA28X_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa28xa_device_details = { |
| .product_id = keyspan_usa28xa_product_id, |
| .msg_format = msg_usa26, |
| .num_ports = 2, |
| .indat_endp_flip = 0, |
| .outdat_endp_flip = 1, |
| .indat_endpoints = {0x81, 0x83}, |
| .outdat_endpoints = {0x01, 0x03}, |
| .inack_endpoints = {0x85, 0x86}, |
| .outcont_endpoints = {0x05, 0x06}, |
| .instat_endpoint = 0x87, |
| .glocont_endpoint = 0x07, |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, |
| .baudclk = KEYSPAN_USA28X_BAUDCLK, |
| }; |
| |
| /* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */ |
| |
| static const struct keyspan_device_details usa49w_device_details = { |
| .product_id = keyspan_usa49w_product_id, |
| .msg_format = msg_usa49, |
| .num_ports = 4, |
| .indat_endp_flip = 0, |
| .outdat_endp_flip = 0, |
| .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, |
| .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, |
| .inack_endpoints = {-1, -1, -1, -1}, |
| .outcont_endpoints = {-1, -1, -1, -1}, |
| .instat_endpoint = 0x87, |
| .glocont_endpoint = 0x07, |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, |
| .baudclk = KEYSPAN_USA49W_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details usa49wlc_device_details = { |
| .product_id = keyspan_usa49wlc_product_id, |
| .msg_format = msg_usa49, |
| .num_ports = 4, |
| .indat_endp_flip = 0, |
| .outdat_endp_flip = 0, |
| .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, |
| .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, |
| .inack_endpoints = {-1, -1, -1, -1}, |
| .outcont_endpoints = {-1, -1, -1, -1}, |
| .instat_endpoint = 0x87, |
| .glocont_endpoint = 0x07, |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, |
| .baudclk = KEYSPAN_USA19W_BAUDCLK, |
| }; |
| |
| static const struct keyspan_device_details *keyspan_devices[] = { |
| &usa18x_device_details, |
| &usa19_device_details, |
| &usa19qi_device_details, |
| &mpr_device_details, |
| &usa19qw_device_details, |
| &usa19w_device_details, |
| &usa19hs_device_details, |
| &usa28_device_details, |
| &usa28x_device_details, |
| &usa28xa_device_details, |
| /* 28xb not required as it renumerates as a 28x */ |
| &usa49w_device_details, |
| &usa49wlc_device_details, |
| NULL, |
| }; |
| |
| static struct usb_device_id keyspan_ids_combined[] = { |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); |
| |
| static struct usb_driver keyspan_driver = { |
| .name = "keyspan", |
| .probe = usb_serial_probe, |
| .disconnect = usb_serial_disconnect, |
| .id_table = keyspan_ids_combined, |
| .no_dynamic_id = 1, |
| }; |
| |
| /* usb_device_id table for the pre-firmware download keyspan devices */ |
| static struct usb_device_id keyspan_pre_ids[] = { |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, |
| { } /* Terminating entry */ |
| }; |
| |
| static struct usb_device_id keyspan_1port_ids[] = { |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, |
| { } /* Terminating entry */ |
| }; |
| |
| static struct usb_device_id keyspan_2port_ids[] = { |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) }, |
| { } /* Terminating entry */ |
| }; |
| |
| static struct usb_device_id keyspan_4port_ids[] = { |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, |
| { } /* Terminating entry */ |
| }; |
| |
| /* Structs for the devices, pre and post renumeration. */ |
| static struct usb_serial_driver keyspan_pre_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "keyspan_no_firm", |
| }, |
| .description = "Keyspan - (without firmware)", |
| .id_table = keyspan_pre_ids, |
| .num_interrupt_in = NUM_DONT_CARE, |
| .num_bulk_in = NUM_DONT_CARE, |
| .num_bulk_out = NUM_DONT_CARE, |
| .num_ports = 1, |
| .attach = keyspan_fake_startup, |
| }; |
| |
| static struct usb_serial_driver keyspan_1port_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "keyspan_1", |
| }, |
| .description = "Keyspan 1 port adapter", |
| .id_table = keyspan_1port_ids, |
| .num_interrupt_in = NUM_DONT_CARE, |
| .num_bulk_in = NUM_DONT_CARE, |
| .num_bulk_out = NUM_DONT_CARE, |
| .num_ports = 1, |
| .open = keyspan_open, |
| .close = keyspan_close, |
| .write = keyspan_write, |
| .write_room = keyspan_write_room, |
| .chars_in_buffer = keyspan_chars_in_buffer, |
| .throttle = keyspan_rx_throttle, |
| .unthrottle = keyspan_rx_unthrottle, |
| .ioctl = keyspan_ioctl, |
| .set_termios = keyspan_set_termios, |
| .break_ctl = keyspan_break_ctl, |
| .tiocmget = keyspan_tiocmget, |
| .tiocmset = keyspan_tiocmset, |
| .attach = keyspan_startup, |
| .shutdown = keyspan_shutdown, |
| }; |
| |
| static struct usb_serial_driver keyspan_2port_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "keyspan_2", |
| }, |
| .description = "Keyspan 2 port adapter", |
| .id_table = keyspan_2port_ids, |
| .num_interrupt_in = NUM_DONT_CARE, |
| .num_bulk_in = NUM_DONT_CARE, |
| .num_bulk_out = NUM_DONT_CARE, |
| .num_ports = 2, |
| .open = keyspan_open, |
| .close = keyspan_close, |
| .write = keyspan_write, |
| .write_room = keyspan_write_room, |
| .chars_in_buffer = keyspan_chars_in_buffer, |
| .throttle = keyspan_rx_throttle, |
| .unthrottle = keyspan_rx_unthrottle, |
| .ioctl = keyspan_ioctl, |
| .set_termios = keyspan_set_termios, |
| .break_ctl = keyspan_break_ctl, |
| .tiocmget = keyspan_tiocmget, |
| .tiocmset = keyspan_tiocmset, |
| .attach = keyspan_startup, |
| .shutdown = keyspan_shutdown, |
| }; |
| |
| static struct usb_serial_driver keyspan_4port_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "keyspan_4", |
| }, |
| .description = "Keyspan 4 port adapter", |
| .id_table = keyspan_4port_ids, |
| .num_interrupt_in = NUM_DONT_CARE, |
| .num_bulk_in = 5, |
| .num_bulk_out = 5, |
| .num_ports = 4, |
| .open = keyspan_open, |
| .close = keyspan_close, |
| .write = keyspan_write, |
| .write_room = keyspan_write_room, |
| .chars_in_buffer = keyspan_chars_in_buffer, |
| .throttle = keyspan_rx_throttle, |
| .unthrottle = keyspan_rx_unthrottle, |
| .ioctl = keyspan_ioctl, |
| .set_termios = keyspan_set_termios, |
| .break_ctl = keyspan_break_ctl, |
| .tiocmget = keyspan_tiocmget, |
| .tiocmset = keyspan_tiocmset, |
| .attach = keyspan_startup, |
| .shutdown = keyspan_shutdown, |
| }; |
| |
| #endif |