PCI: pciehp: remove 'name' parameter
We do not need to manage our own name parameter, especially since
the PCI core can change it on our behalf, in the case of duplicate
slot names.
Remove 'name' from pciehp's version of struct slot, and remove
unused 'task_list' as well.
Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index acb7f9e..cce6e5f 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -66,7 +66,7 @@
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
- ctrl_info(ctrl, "Button pressed on Slot(%s)\n", p_slot->name);
+ ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot));
event_type = INT_BUTTON_PRESS;
queue_interrupt_event(p_slot, event_type);
@@ -88,13 +88,13 @@
/*
* Switch opened
*/
- ctrl_info(ctrl, "Latch open on Slot(%s)\n", p_slot->name);
+ ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot));
event_type = INT_SWITCH_OPEN;
} else {
/*
* Switch closed
*/
- ctrl_info(ctrl, "Latch close on Slot(%s)\n", p_slot->name);
+ ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot));
event_type = INT_SWITCH_CLOSE;
}
@@ -120,13 +120,14 @@
/*
* Card Present
*/
- ctrl_info(ctrl, "Card present on Slot(%s)\n", p_slot->name);
+ ctrl_info(ctrl, "Card present on Slot(%s)\n", slot_name(p_slot));
event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
- ctrl_info(ctrl, "Card not present on Slot(%s)\n", p_slot->name);
+ ctrl_info(ctrl, "Card not present on Slot(%s)\n",
+ slot_name(p_slot));
event_type = INT_PRESENCE_OFF;
}
@@ -148,13 +149,13 @@
* power fault Cleared
*/
ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n",
- p_slot->name);
+ slot_name(p_slot));
event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
* power fault
*/
- ctrl_info(ctrl, "Power fault on Slot(%s)\n", p_slot->name);
+ ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot));
event_type = INT_POWER_FAULT;
ctrl_info(ctrl, "power fault bit %x set\n", 0);
}
@@ -412,12 +413,12 @@
p_slot->state = BLINKINGOFF_STATE;
ctrl_info(ctrl,
"PCI slot #%s - powering off due to button "
- "press.\n", p_slot->name);
+ "press.\n", slot_name(p_slot));
} else {
p_slot->state = BLINKINGON_STATE;
ctrl_info(ctrl,
"PCI slot #%s - powering on due to button "
- "press.\n", p_slot->name);
+ "press.\n", slot_name(p_slot));
}
/* blink green LED and turn off amber */
if (PWR_LED(ctrl))
@@ -434,7 +435,7 @@
* press the attention again before the 5 sec. limit
* expires to cancel hot-add or hot-remove
*/
- ctrl_info(ctrl, "Button cancel on Slot(%s)\n", p_slot->name);
+ ctrl_info(ctrl, "Button cancel on Slot(%s)\n", slot_name(p_slot));
ctrl_dbg(ctrl, "%s: button cancel\n", __func__);
cancel_delayed_work(&p_slot->work);
if (p_slot->state == BLINKINGOFF_STATE) {
@@ -447,7 +448,7 @@
if (ATTN_LED(ctrl))
p_slot->hpc_ops->set_attention_status(p_slot, 0);
ctrl_info(ctrl, "PCI slot #%s - action canceled "
- "due to button press\n", p_slot->name);
+ "due to button press\n", slot_name(p_slot));
p_slot->state = STATIC_STATE;
break;
case POWEROFF_STATE:
@@ -457,7 +458,7 @@
* this means that the previous attention button action
* to hot-add or hot-remove is undergoing
*/
- ctrl_info(ctrl, "Button ignore on Slot(%s)\n", p_slot->name);
+ ctrl_info(ctrl, "Button ignore on Slot(%s)\n", slot_name(p_slot));
update_slot_info(p_slot);
break;
default:
@@ -540,7 +541,7 @@
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
ctrl_info(ctrl, "%s: no adapter on slot(%s)\n",
- __func__, p_slot->name);
+ __func__, slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
@@ -548,7 +549,7 @@
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
ctrl_info(ctrl, "%s: latch open on slot(%s)\n",
- __func__, p_slot->name);
+ __func__, slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
@@ -558,7 +559,7 @@
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
ctrl_info(ctrl, "%s: already enabled on slot(%s)\n",
- __func__, p_slot->name);
+ __func__, slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
@@ -594,7 +595,7 @@
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (ret || !getstatus) {
ctrl_info(ctrl, "%s: no adapter on slot(%s)\n",
- __func__, p_slot->name);
+ __func__, slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
@@ -604,7 +605,7 @@
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
ctrl_info(ctrl, "%s: latch open on slot(%s)\n",
- __func__, p_slot->name);
+ __func__, slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
@@ -614,7 +615,7 @@
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
ctrl_info(ctrl, "%s: already disabled slot(%s)\n",
- __func__, p_slot->name);
+ __func__, slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
@@ -645,14 +646,16 @@
break;
case POWERON_STATE:
ctrl_info(ctrl, "Slot %s is already in powering on state\n",
- p_slot->name);
+ slot_name(p_slot));
break;
case BLINKINGOFF_STATE:
case POWEROFF_STATE:
- ctrl_info(ctrl, "Already enabled on slot %s\n", p_slot->name);
+ ctrl_info(ctrl, "Already enabled on slot %s\n",
+ slot_name(p_slot));
break;
default:
- ctrl_err(ctrl, "Not a valid state on slot %s\n", p_slot->name);
+ ctrl_err(ctrl, "Not a valid state on slot %s\n",
+ slot_name(p_slot));
break;
}
mutex_unlock(&p_slot->lock);
@@ -678,14 +681,16 @@
break;
case POWEROFF_STATE:
ctrl_info(ctrl, "Slot %s is already in powering off state\n",
- p_slot->name);
+ slot_name(p_slot));
break;
case BLINKINGON_STATE:
case POWERON_STATE:
- ctrl_info(ctrl, "Already disabled on slot %s\n", p_slot->name);
+ ctrl_info(ctrl, "Already disabled on slot %s\n",
+ slot_name(p_slot));
break;
default:
- ctrl_err(ctrl, "Not a valid state on slot %s\n", p_slot->name);
+ ctrl_err(ctrl, "Not a valid state on slot %s\n",
+ slot_name(p_slot));
break;
}
mutex_unlock(&p_slot->lock);