ALSA: pci: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.
Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/ice1712/se.c b/sound/pci/ice1712/se.c
index 53b555f..ffd894b 100644
--- a/sound/pci/ice1712/se.c
+++ b/sound/pci/ice1712/se.c
@@ -113,7 +113,7 @@
/* WM8740 interface */
/****************************************************************************/
-static void __devinit se200pci_WM8740_init(struct snd_ice1712 *ice)
+static void se200pci_WM8740_init(struct snd_ice1712 *ice)
{
/* nothing to do */
}
@@ -195,7 +195,7 @@
}
}
-static void __devinit se200pci_WM8766_init(struct snd_ice1712 *ice)
+static void se200pci_WM8766_init(struct snd_ice1712 *ice)
{
se200pci_WM8766_write(ice, 0x1f, 0x000); /* RESET ALL */
udelay(10);
@@ -299,10 +299,10 @@
}
}
-static void __devinit se200pci_WM8776_init(struct snd_ice1712 *ice)
+static void se200pci_WM8776_init(struct snd_ice1712 *ice)
{
int i;
- static unsigned short __devinitdata default_values[] = {
+ static unsigned short default_values[] = {
0x100, 0x100, 0x100,
0x100, 0x100, 0x100,
0x000, 0x090, 0x000, 0x000,
@@ -599,7 +599,7 @@
static const DECLARE_TLV_DB_SCALE(db_scale_gain1, -12750, 50, 1);
static const DECLARE_TLV_DB_SCALE(db_scale_gain2, -10350, 50, 1);
-static int __devinit se200pci_add_controls(struct snd_ice1712 *ice)
+static int se200pci_add_controls(struct snd_ice1712 *ice)
{
int i;
struct snd_kcontrol_new cont;
@@ -677,7 +677,7 @@
/* probe/initialize/setup */
/****************************************************************************/
-static int __devinit se_init(struct snd_ice1712 *ice)
+static int se_init(struct snd_ice1712 *ice)
{
struct se_spec *spec;
@@ -705,7 +705,7 @@
return -ENOENT;
}
-static int __devinit se_add_controls(struct snd_ice1712 *ice)
+static int se_add_controls(struct snd_ice1712 *ice)
{
int err;
@@ -722,7 +722,7 @@
/* entry point */
/****************************************************************************/
-static unsigned char se200pci_eeprom[] __devinitdata = {
+static unsigned char se200pci_eeprom[] = {
[ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */
@@ -741,7 +741,7 @@
[ICE_EEP2_GPIO_STATE2] = 0x07, /* WM8766 ML/MC/MD */
};
-static unsigned char se90pci_eeprom[] __devinitdata = {
+static unsigned char se90pci_eeprom[] = {
[ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */
@@ -750,7 +750,7 @@
/* ALL GPIO bits are in input mode */
};
-struct snd_ice1712_card_info snd_vt1724_se_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1724_se_cards[] = {
{
.subvendor = VT1724_SUBDEVICE_SE200PCI,
.name = "ONKYO SE200PCI",