| /* | 
 |  * numaq_32.c - Low-level PCI access for NUMA-Q machines | 
 |  */ | 
 |  | 
 | #include <linux/pci.h> | 
 | #include <linux/init.h> | 
 | #include <linux/nodemask.h> | 
 | #include <asm/apic.h> | 
 | #include <asm/mpspec.h> | 
 | #include <asm/pci_x86.h> | 
 | #include <asm/numaq.h> | 
 |  | 
 | #define BUS2QUAD(global) (mp_bus_id_to_node[global]) | 
 |  | 
 | #define BUS2LOCAL(global) (mp_bus_id_to_local[global]) | 
 |  | 
 | #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) | 
 |  | 
 | #define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ | 
 | 	(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) | 
 |  | 
 | static void write_cf8(unsigned bus, unsigned devfn, unsigned reg) | 
 | { | 
 | 	unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg); | 
 | 	if (xquad_portio) | 
 | 		writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus))); | 
 | 	else | 
 | 		outl(val, 0xCF8); | 
 | } | 
 |  | 
 | static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, | 
 | 			     unsigned int devfn, int reg, int len, u32 *value) | 
 | { | 
 | 	unsigned long flags; | 
 | 	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); | 
 |  | 
 | 	if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	raw_spin_lock_irqsave(&pci_config_lock, flags); | 
 |  | 
 | 	write_cf8(bus, devfn, reg); | 
 |  | 
 | 	switch (len) { | 
 | 	case 1: | 
 | 		if (xquad_portio) | 
 | 			*value = readb(adr + (reg & 3)); | 
 | 		else | 
 | 			*value = inb(0xCFC + (reg & 3)); | 
 | 		break; | 
 | 	case 2: | 
 | 		if (xquad_portio) | 
 | 			*value = readw(adr + (reg & 2)); | 
 | 		else | 
 | 			*value = inw(0xCFC + (reg & 2)); | 
 | 		break; | 
 | 	case 4: | 
 | 		if (xquad_portio) | 
 | 			*value = readl(adr); | 
 | 		else | 
 | 			*value = inl(0xCFC); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	raw_spin_unlock_irqrestore(&pci_config_lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, | 
 | 			      unsigned int devfn, int reg, int len, u32 value) | 
 | { | 
 | 	unsigned long flags; | 
 | 	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); | 
 |  | 
 | 	if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))  | 
 | 		return -EINVAL; | 
 |  | 
 | 	raw_spin_lock_irqsave(&pci_config_lock, flags); | 
 |  | 
 | 	write_cf8(bus, devfn, reg); | 
 |  | 
 | 	switch (len) { | 
 | 	case 1: | 
 | 		if (xquad_portio) | 
 | 			writeb(value, adr + (reg & 3)); | 
 | 		else | 
 | 			outb((u8)value, 0xCFC + (reg & 3)); | 
 | 		break; | 
 | 	case 2: | 
 | 		if (xquad_portio) | 
 | 			writew(value, adr + (reg & 2)); | 
 | 		else | 
 | 			outw((u16)value, 0xCFC + (reg & 2)); | 
 | 		break; | 
 | 	case 4: | 
 | 		if (xquad_portio) | 
 | 			writel(value, adr + reg); | 
 | 		else | 
 | 			outl((u32)value, 0xCFC); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	raw_spin_unlock_irqrestore(&pci_config_lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #undef PCI_CONF1_MQ_ADDRESS | 
 |  | 
 | static struct pci_raw_ops pci_direct_conf1_mq = { | 
 | 	.read	= pci_conf1_mq_read, | 
 | 	.write	= pci_conf1_mq_write | 
 | }; | 
 |  | 
 |  | 
 | static void __devinit pci_fixup_i450nx(struct pci_dev *d) | 
 | { | 
 | 	/* | 
 | 	 * i450NX -- Find and scan all secondary buses on all PXB's. | 
 | 	 */ | 
 | 	int pxb, reg; | 
 | 	u8 busno, suba, subb; | 
 | 	int quad = BUS2QUAD(d->bus->number); | 
 |  | 
 | 	dev_info(&d->dev, "searching for i450NX host bridges\n"); | 
 | 	reg = 0xd0; | 
 | 	for(pxb=0; pxb<2; pxb++) { | 
 | 		pci_read_config_byte(d, reg++, &busno); | 
 | 		pci_read_config_byte(d, reg++, &suba); | 
 | 		pci_read_config_byte(d, reg++, &subb); | 
 | 		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", | 
 | 			pxb, busno, suba, subb); | 
 | 		if (busno) { | 
 | 			/* Bus A */ | 
 | 			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno)); | 
 | 		} | 
 | 		if (suba < subb) { | 
 | 			/* Bus B */ | 
 | 			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1)); | 
 | 		} | 
 | 	} | 
 | 	pcibios_last_bus = -1; | 
 | } | 
 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); | 
 |  | 
 | int __init pci_numaq_init(void) | 
 | { | 
 | 	int quad; | 
 |  | 
 | 	raw_pci_ops = &pci_direct_conf1_mq; | 
 |  | 
 | 	pci_root_bus = pcibios_scan_root(0); | 
 | 	if (pci_root_bus) | 
 | 		pci_bus_add_devices(pci_root_bus); | 
 | 	if (num_online_nodes() > 1) | 
 | 		for_each_online_node(quad) { | 
 | 			if (quad == 0) | 
 | 				continue; | 
 | 			printk("Scanning PCI bus %d for quad %d\n",  | 
 | 				QUADLOCAL2BUS(quad,0), quad); | 
 | 			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0)); | 
 | 		} | 
 | 	return 0; | 
 | } |